Block Library
Face Texture:
Block Weight: Block Volume:
Center of Gravity:
Cobble / Limestone Kingstone / Ledgestone
Face Texture:
Block Weight: Block Volume:
Center of Gravity:
R-28M 710mm MIDDLE
Face Texture:
Block Weight: Block Volume:
Center of Gravity:
Cobble / Limestone Kingstone / Ledgestone
m3
R-28B 710mm BOTTOM
Block
1. Units for dimensions are mm, typical unless noted otherwise.
2. Block production varies with each licensed Redi-Rock manufacturer. Confirm availability before specifying or ordering.
3. Center of Gravity is measured from the back of block.
4. Actual block volumes and weights may vary.
Cobble / Limestone Kingstone / Ledgestone
R-28HM 710mm HALF MIDDLE
Center of Gravity:
R-28HB 710mm HALF BOTTOM
5. Weights are based upon a concrete density of 2291 kg/m3
6. Half blocks contain a fork slot on only one side of the block.
7. Interface Shear knobs are typically 254 mm diameter by 102 mm tall. Smaller knob diameters are available.
RETAINING BLOCKS
Block Library
Face Texture:
Block Weight: Block Volume:
Center of Gravity:
SPECIALITY BLOCK
Cobble / Limestone
Kingstone / Ledgestone
Block Weight: Block Volume:
Center of Gravity:
Cobble / Limestone
SPECIALITY BLOCK
Kingstone / Ledgestone
Face Texture:
Block Weight: Block Volume:
Center of Gravity:
Face Texture:
Block Weight: Block Volume:
Center of Gravity:
/ Limestone
Kingstone / Ledgestone
Block Weight: Block Volume:
Center of Gravity:
/ Limestone Cobble / Limestone
Kingstone / Ledgestone
Face
Block Weight: Block Volume:
Center of Gravity:
Kingstone / Ledgestone
/ Limestone
Kingstone / Ledgestone
1. Units for dimensions are mm, typical unless noted otherwise.
2. Block production varies with each licensed Redi-Rock manufacturer. Confirm availability before specifying or ordering.
3. Center of Gravity is measured from the back of block.
4. Actual block volumes and weights may vary.
5. Weights are based upon a concrete density of 2291 kg/m3
6. Half blocks contain a fork slot on only one side of the block.
7. Interface Shear knobs are typically 254 mm diameter by 102 mm tall. Smaller knob diameters are available.
RETAINING BLOCKS
Block Library
Cobble / Limestone Center
1. Units for dimensions are mm, typical unless noted otherwise.
2. Block production varies with each licensed Redi-Rock manufacturer. Confirm availability before Specifying or Ordering.
3. Center of Gravity is measured from the back of block.
4. Actual block volumes and weights may vary.
5.
RETAINING BLOCKS
Block Library
Center of Gravity: Block Weight: Block Volume: Cobble / Limestone Face Texture:
Cobble / Limestone
Cobble / Limestone Cobble / Limestone
1. Units for dimensions are mm, typical unless noted otherwise.
2. Block production varies with each licensed Redi-Rock manufacturer. Confirm availability before specifying or ordering.
3. Center of Gravity is measured from the back of block.
4. Actual block volumes and weights may vary.
RETAINING BLOCKS
Block Library
R-AB ANCHOR BOTTOM
/ Limestone
Block Weight: Block Volume:
Center of Gravity:
/
Block Weight: Block Volume:
Center of Gravity:
1. Units for dimensions are mm, typical unless noted otherwise.
2. Block production varies with each licensed Redi-Rock manufacturer. Confirm availability before specifying or ordering.
3. Center of Gravity is measured from the back of block.
4. Actual block volumes and weights may vary.
R-AM ANCHOR MIDDLE
Face Texture:
Block Weight: Block Volume:
of Gravity:
/
5. Weights are based upon a concrete density of 2291 kg/m3
6. 695mm wide blocks contain a fork slot on only one side of the block. These are speciality blocks and may have limited availability and is only used in double 90-degree corner applications.
7. Interface Shear knobs are
Smaller knob diameters are available.
Kingstone / Ledgestone
Kingstone / Ledgestone
FREESTANDING BLOCKS
Block Library
/ Limestone Face
Block
Block Volume:
KNOBS @ 584 OC, TYP. F-FM FORCE PROTECTION MIDDLE
Kingstone / Ledgestone Kingstone / Ledgestone
152 DIAMETER x 457 TALL RECESS EACH END
CAST-IN #13 REBAR HOOK EACH END, TYP.
610 ± LEDGESTONE COBBLESTONE 584 ± LIMESTONE
F-FB FORCE PROTECTION BOTTOM
Cobble / Limestone
/ Limestone Block
Kingstone / Ledgestone
KNOBS @ 584 OC, TYP.
254 DIAMETER x 102 HIGH, TYPICAL. 152 DIAMETER KNOBS AVAILABLE.
76 DIAMETER HORIZONTAL VOID FULL LENGTH OF BLOCK, TYP.
1. Units for dimensions are mm, typical unless noted otherwise.
2. Block production varies with each licensed Redi-Rock manufacturer. Confirm availability before specifying or ordering.
3. Architectural faces on the blocks have varying texture. 4.
FACE TEXTURE VARIES
610 ± LEDGESTONE COBBLESTONE 584 ± LIMESTONE FACE TEXTURE VARIES LIFTING INSERT OR TEXTURED
FREESTANDING BLOCKS
Block Library
Face Texture:
Block Weight: Block Volume:
FACE TEXTURE VARIES F-HCM HALF CORNER MIDDLE
Cobble / Limestone Kingstone / Ledgestone
Face Texture:
Block Weight: Block Volume:
HALF CORNER GARDEN TOP F-HCB HALF CORNER BOTTOM
Face Texture:
Block Weight: Block Volume:
Cobble / Limestone Kingstone / Ledgestone
Face Texture:
Block Weight: Block Volume:
Cobble / Limestone Kingstone / Ledgestone
1. Units for dimensions are mm, typical unless noted otherwise.
2. Block production varies with each licensed Redi-Rock manufacturer. Confirm availability before specifying or ordering.
3. Architectural faces on the blocks have varying texture.
Cobble / Limestone Kingstone / Ledgestone
± LIMESTONE FACE TEXTURE VARIES LIFTING INSERT OR TEXTURED TOP SURFACE, OPTIONAL
4. Actual block volumes and weights may vary. 5. Weights are based upon a concrete density of 2291 kg/m3 6. Knobs are typically 254mm diameter by 102 mm tall. Smaller knobs are available.