Emac

EXPANSION JOINT SYSTEMS AND BUILDING PROFILES

CONTENTS 1. WHAT ARE EXPANSION JOINTS?

10

2. SEISMIC JOINTS.

12

3. WHAT DO YOU NEED TO KNOW TO CHOOSE THE RIGHT JOINT?

14

4. TABLE FOR JOINT SELECTION.

15

PRODUCT INDEX 5. FLUSH-MOUNTED JOINTS – WITH ELASTIC STRIPS

17

Novojunta Pro® Basic

18

Novojunta Pro® Aluminium

19

Novojunta Pro® Flush-mounted Perimeter

20

Novojunta Pro® L50

21

Novojunta Pro® L55

22

Novojunta Pro® L65

23

Novojunta Pro® L85

24

Novojunta Pro® XL105

25

Novojunta Pro® XL130

26

Novojunta Pro® WP80 Watertight

27

6. FLUSH-MOUNTED JOINTS – ALL METAL

29

Novojunta Pro® AL30 RS

30

Novojunta Pro® Mobile

31

Novojunta Pro® Metal 50

32

Novojunta Pro® Metal 60

33

Novojunta Pro® Metal 80

34

Novojunta Pro® Metal SIS110

35

Novojunta Pro® Metal 125

36

Novojunta Pro® Metal SIS

37

Novojunta Pro® Sismo SU

38

7. JOINTS OF SPECIAL WIDTHS 8. OVERLAID JOINTS

39 41

Novojunta Pro® AL30

42

Novojunta Pro® AL30 Perimeter

43

Novojunta Pro® Decor

44

Novojunta Pro® Basic SP

45

Novojunta Pro® Anti-slip

46

Novojunta Pro® Overlaid Perimeter

47

Novojunta Pro® SP

48

Novojunta Pro® Sismo PE

49

Novojunta Pro® Metal SP90

50

9. VERTICAL JOINTS

51

Novojunta Pro® AL30

52

Novojunta Pro® AL30 RS

53

Novojunta Pro® Decor

54

Novojunta Pro® Basic VT

55

Novojunta Pro® Basic VT SP

56

Novojunta Pro® Anti-slip

57

Novojunta Pro® Sismo PA

58

Novojunta Pro® PA

59

Novojunta Pro® PASP

60

10. WATERTIGHT MEMBRANE

61

11. FIRESTOP JOINTS

63 64 65

Firestop cord Firestop mastic

12. RETRACTION JOINTS IN CONCRETE FLOORS AND MORTAR SCREEDS

67

Novojunta速 Hormigonado

68

Novojunta Pro速 Hormigonado

69

13. JOINT COVERS

71

Novotapajuntas NDP

72

Novotapajuntas NDA

73

Novotapajuntas NDAS

74

Novotapajuntas NCJE

74

Novotapajuntas GTA

75

Novotapajuntas TX

76

Novotapajuntas GTX

76

Novosepara 10

77

14. EXPANSION AND FRACTIONING JOINTS FOR PAVING

79

Novojunta® Metallic

80

Novojunta® Metallic Perimeter

81

Novojunta Decor®

82

Novojunta Decor® XL

83

Novojunta Metallic® Flecha

84

Novojunta® JSI

84

Novojunta Decor® Flecha

85

Novojunta® 1 Pvc

86

Novojunta® 3 Pvc

87

15. PROFILES AND ACCESSORIES

89

Novocanto® Stainless Steel

90

Novocanto速 Aluminium

90

Novocanto速 Pvc

91

Novoyeso

91

Monocapa

92

Novopared-Novosuelo

92

Novolistel速 Basic Stainless Steel

93

Novolistel速 3 Aluminium

93

Novoescuadra Aluminium

94

Novoescuadra Plus

94

Novosepara 1

95

Novosepara 6

95

Novosepara 9

96

Novopletina Aluminium

96

Novoescocia® 4 Aluminium

97

Novoescocia® 4 Pvc

97

16. SKIRTING

99

Novorodapie® Rehabit

100

Novorodapie® L

100

Novorodapie® Flex

101

Novorodapie® SemiFlex

101

17. STEP FINISHES

103

Novopeldaño® 5

104

Novopeldaño® Safety

104

Novopeldaño® Lúmina

105

18. MATS 19. OTHER EXCLUSIVE SOLUTIONS

107 111

1. WHAT ARE EXPANSION JOINTS? In construction everything moves. All buildings and their structural elements are subject to pressures that cause movements, deformations and geometrical changes.

THESE PRESSURES STEM FROM THE FOLLOWING CAUSES: • Variations in temperature of the environment.

• Expansions generated from the contraction of the different construction materials.

• Settlement and movement of the terrain • Seismic movement • The weight of the buildings themselves and their use.

• Wind pressure.

• Loads and traffic.

With the aim of controlling and preventing these internal tensions, medium-sized and large buildings are built in blocks, so that each of these blocks operates independently and does not knock against the block next to it.

Between these blocks, spaces are reserved for the expansion joints. The placement and opening of these joints are determined by the estimator or structural engineers, who will also determine the load capacity that the joint must bear.

An expansion joint is an opening that pierces the entire construction: floors, walls, façades and roofs.

The structural expansion joints absorb and accompany the buildings’ movements to control and prevent cracking.

They also enable isolation of the joins between different structural elements, including walls, machinery foundations, drains and so on, avoiding the transmission of tensions between them.

Doing away with expansion joints, using an unsuitable joint system or distributing joints incorrectly can encourage the appearance of all kinds of pathology in the building’s structure and finishes which, once works are terminated, will be difficult to solve and mean high maintenance costs.

In contrast, correctly resolving the most critical joins and flashing on a site is the mark of a good project.

Expansion joint profiles are applied in airports, shopping centres, hospitals, schools, parking facilities, industrial buildings and factories. They consist of metal profiles (aluminium, steel, stainless steel, etc.), generally joined by rubber inserts, and covering the openings to allow movement in the blocks without causing damage to the cement or cladding.

10

NOVOJUNTA PRO® EXPANSION JOINTS CAN BE CLASSIFIED INTO THE FOLLOWING CATEGORIES ACCORDING TO INSTALLATION: • Overlaid, on the floor.

• Flush, built-in flush with the floor.

ACCORDING TO THE LOAD THEY SUPPORT: • Light • Medium • Heavy • Very heavy ACCORDING TO PURPOSE: • Floor-floor • Wall-wall • Floor-wall

The Novojunta Pro® series by Emac® enables expansion joints to act without interfering with structural movements. This is a complete range of profile systems conceived to absorb the different movement types and avoid the appearance of cracks and other pathologies, thereby extending the useful life of structures.

They can be installed with all types of material: porcelain, concrete, terrazo, granite, marble and other stone.

Furthermore, they can be complemented with watertight bands to avoid leaks, dampness and dirt, as well as using firestop systems that stop the passage of fire and smoke.

All the trials we carry out, we do so in independent technological institutes belonging to the redIT of the Valencian Community.

According to their movement capacity, expansion joints are divided into”thermal” and”seismic”.

Thermal joints: are those that admit the expansion of the construction elements themselves. Habitually these joints do not surpass 50 mm (1.97”) joint widths and expansions of +/- 10 mm (0.39”) Seismic joints: as a general rule, seismic joints are classed as those that have a multi-directional expansion capacity of at least 25% of the width of the joint in each horizontal direction. For example, in the case of a joint 50 mm (1.97”) wide, in order to class it as a joint with seismic capacity, it must have an expansion of at least +/- 12.5 mm (0.49”).

Furthermore, these joints must have enough resistance not to deform with the traffic borne and also span the distance between blocks with enough rigidity. It is advisable to install joints that are all metal.

11

2. SEISMIC JOINTS Seismic danger or the destructive potential of earthquakes is determined by four conditions according to Bertero (1992):

CONDITIONS THAT DETERMINE THE DESTRUCTIVE POTENTIAL OF EARTHQUAKES • Earthquake severity, its magnitude. The movement induced in the terrain which will affect the constructions.

• The seismic source and its distance.

• The size, distribution and economic development of the towns affected.

• Preparation against the earthquake, understood as the population’s degree of response and the prevention measures that are taken against the chance of an earthquake.

GLOBAL SEISMIC HAZARD MAP

produced by the Global Seismic Hazard Assessment Program (GSHAP) Por D. Giardini. G. Grünthal. K. Shedlock. and P.Zhang 1999

u 12

Against the phenomenon of earthquakes, construction plays a fundamental role to guarantee the safety and stability of buildings.

This is especially important in those which are necessary for the population’s survival, such as hospitals, fire stations, etc. Countries such as Japan, the USA or Chile have developed highly demanding standards so that buildings overcome seismic activity without failure or collapse.

CLASSIFICATION OF CONSTRUCTIONS

At a European level, we find references to seismic aspects in the Eurocode 8: Design of structures for earthquake resistance, which indicates requirements such as uniformity and symmetry for constructions, to improve their response to seismic activity. So a cubic design of buildings is recommended, without irregular geometries, and uniformity can be achieved by subdividing the building using seismic joints.

• Constructions of special importance: buildings whose destruction could cause a large number of victims or interrupt an essential service.

We can classify constructions according to their importance into three types:

• Constructions of moderate importance: those buildings whose destruction by an earthquake would have little probability of causing victims.

• Constructions of normal importance: buildings whose destruction could cause victims, but which is not a building containing essential services in the event of a catastrophe.

The last group includes hospitals, communications buildings (radio, television, telecommunications centres), buildings for organisation and coordination, buildings for rescue personnel and equipment (fire fighters, police, armed forces, machinery and ambulance parks), basic utilities (water tanks, gas, fuels, pump centres, electrical power plants), airports, public performance buildings, large shopping centres and special constructions such as nuclear power plants, dams and places where dangerous substances are stored.

Each construction must be separated from its adjacent buildings by a minimum distance to mitigate the shock effects during seismic movements. These required minimum separation values are established. The joints between the bodies of buildings must have at least a width corresponding to the sum of the maximum lateral displacements of the two bodies. The joints must be situated at a maximum distance of 40 m (43 yd).

13

3. WHAT DO YOU NEED TO KNOW TO CHOOSE THE RIGHT JOINT? FUNDAMENTAL QUESTIONS THAT SHOULD BE ASKED 1. What width does the joint opening have?

2. What is the calculated movement that the structure will have?

• Horizontal movement

• Vertical movement

3. What type of flooring will be installed?

4. What type of fixture does it need?

• Flush

• Overlaid (previously installed cladding)

5. What thickness does the cladding (h) have? (for flush-mounted joints) 6. Required load capacity. What mode of transport will pass over it?.

7. Will the joint be in the exterior or the interior of the building?.

8. Does it need to be watertight (for example underground car parks)?

9. Any possible presence of chemical agents?

!

14

EVALUATION AND TECHNICAL STUDY WITH NO OBLIGATION OUR TECHNICAL TEAM IS FULLY AT YOUR SERVICE TO RESOLVE YOUR DOUBTS OR PROVIDE THE TECHNICAL INFORMATION YOU NEED: TECHNICAL FILES, TRIAL CERTIFICATES, CAD DRAWINGS, BC3 FILES, INSTALLATION INSTRUCTIONS AND SO ON. IF YOU PREFER, WE WILL PROVIDE YOU WITH THE PLANS AND MAKE THE CALCULATION AND DISTRIBUTION OF THE JOINTS NEEDED FOR YOUR PROJECT.

4. TABLE FOR JOINT SELECTION JOINT TYPE

INSTALLATION

LOAD-USE

Light/Medium

Medium

Medium/Heavy

REFERENCE

MAXIMUM JOINT WIDTH

TYPE

PAGE

Novojunta Pro® AL30 RS

30 mm (1.18”)

All Metal

30

Novojunta Pro® Basic

40 mm (1.57”)

With elastic strip

18

Novojunta Pro® XL130

130 mm (5.12”)

With elastic strip

26

Novojunta Pro® Aluminium

55 mm (2.16”)

With elastic strip

19

Novojunta Pro® L50

50 mm (1.97”)

With elastic strip

21

Novojunta Pro® L55

55 mm (2.16”)

With elastic strip

22

Novojunta Pro® L65

65 mm (2.56”)

With elastic strip

23

Novojunta Pro® L85

85 mm (3.35”)

With elastic strip

24

Novojunta Pro® XL105

105 mm (4.13”)

With elastic strip

25

Novojunta Pro® Metal SIS110

110 mm (4.33”)

All Metal. Seismic

35

Novojunta Pro® WP80

80 mm (3.15”)

Watertight

27

Novojunta Pro® Mobile

50 mm (1.97”)

All Metal

31

Novojunta Pro® Metal 50

50 mm (1.97”)

All Metal

32

Novojunta Pro® Metal 60

60 mm (2.36”)

All Metal

33

Novojunta Pro® Metal 80

80 mm (3.15”)

All Metal

34

Novojunta Pro® Sismo SU

100 mm (3.94”)

All Metal. Seismic

38

Novojunta Pro® Metal 125

125 mm (4.92”)

All Metal. Seismic

36

Novojunta Pro® Metal SIS

200 mm (7.87”)

All Metal. Seismic

37

Novojunta Pro® Decor

30 mm (1.18”)

Metal+rubber

44

Novojunta Pro® AL30

30 mm (1.18”)

All Metal

42

Novojunta Pro® Basic SP

40 mm (1.57”)

With elastic strip

45

Novojunta Pro® Anti-slip

44 mm (1.73”)

With elastic strip

46

Novojunta Pro® SP

50 mm (1.97”)

With elastic strip

48

Novojunta Pro® SP90

90 mm (3.54”)

With elastic strip. Seismic

50

Novojunta Pro® Flush-mounted perimeter

42 mm (1.65”)

With elastic strip

20

Novojunta Pro® AL30 Perimeter

32 mm (1.26”)

All Metal

43

Novojunta Pro® Overlaid perimeter

44 mm (1.73”)

With elastic strip

47

Novojunta Pro® Sismo PE

74 mm (2.91”)

All Metal. Seismic

49

Novojunta Pro® AL30 RS

30 mm (1.18”)

All Metal

53

Novojunta Pro® Basic VT

40 mm (1.57”)

With elastic strip

55

Novojunta Pro® PA

330 mm (12.99”)

With elastic strip. Seismic

59

Novojunta Pro AL30

30 mm (1.18”)

All Metal

52

Novojunta Pro® Decor

30 mm (1.18”)

Metal+rubber

54

Novojunta Pro® Basic VT SP

40 mm (1.57”)

With elastic strip

56

Novojunta Pro® Anti-slip

44 mm (1.73”)

With elastic strip

57

Novojunta Pro® Sismo PA

100 mm (3.94”)

All Metal. Seismic

58

Novojunta Pro® PASP

360 mm (14.17”)

With elastic strip. Seismic

60

Flush-mounted Heavy

Floor/Floor

Very heavy

Light Light/Medium Overlaid Medium Medium/Heavy Flush-mounted

-

Floor/Wall Overlaid

Flush-mounted.

-

-

®

Wall/Wall Overlaid

-

15

PRODUCT

16

5. FLUSH-MOUNTED JOINTS WITH ELASTIC STRIPS

u 17

Floor/Floor Light/medium load Flush-mounted

NovoJunta Pro BASIC ®

OCCASIONAL USE

• Expansion joints for flooring (concrete, terrazo, stone, etc.).

• For joint widths up to 45 mm (1.77”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

• Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

• 5 profile heights available: 12.5, 22, 40, 50 and 80 mm (0.49”, 0.87”, 1.57”, 1.97” and 3.15”).

• 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface.

• All the profiles and rubber parts in the series can be combined, ordered separately and not as an assembly.

• They can be installed between pavings of different heights/ thicknesses, combining aluminium attachment flanges with different heights (h) to each side of the joint.

Materials and technical details

Load capacity

Rubber colours

• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasional heavy load traffic.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Black 9005

Grey 7035

• Aluminium L-shaped profiles, perforated on their base to receive the fastenings.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Beige 1013

SMOOTH GROOVED

REFERENCE

JOINT WIDTH (a)

JOINTS UP TO 25 mm WIDE NJPB2012* NJPB2022* NJPB2040* 20 mm (0.79”) NJPB2050* NJPB2080* JOINTS UP TO 35 mm WIDE NJPB3012* NJPB3022* NJPB3040* 30 mm (1.18”) NJPB3050* NJPB3080* JOINTS UP TO 45 mm WIDE NJPB4012* NJPB4022* NJPB4040* 40 mm (1.57”) NJPB4050* NJPB4080*

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION Smooth rubber

EXPANSION Grooved rubber

24 mm (0.94”)

104 mm (4.09”) 104 mm (4.09”) 120 mm (4.72”) 160 mm (6.3”) 130 mm (5.12”)

12.5 mm (0.49”) 22 mm (0.87”) 40 mm (1.57”) 50 mm (1.97”) 80 mm (3.15”)

smooth or grooved

8 mm (+4/-4) 0.31” (+0.15/-0.15)

10 mm (+5/-5) 0.39” (+0.19/-0.19)

34 mm (1.34”)

114 mm (4.49”) 114 mm (4.49”) 130 mm (5.12”) 170 mm (6.69”) 140 mm (5.51”)

12.5 mm (0.49”) 22 mm (0.87”) 40 mm (1.57”) 50 mm (1.97”) 80 mm (3.15”)

smooth or grooved

10 mm (+5/-5) 0.39” (+0.19/-0.19)

12 mm (+6/-6) 0.47” (+0.23/-0.23)

44 mm (1.73”)

124 mm (4.88”) 124 mm (4.88”) 140 mm (5.51”) 180 mm (7.09”) 150 mm (5.90”)

12.5 mm (0.49”) 22 mm (0.87”) 40 mm (1.57”) 50 mm (1.97”) 80 mm (3.15”)

smooth or grooved

12 mm (+6/-6) 0.47” (+0.23/-0.23)

14 mm (+7/-7) 0.55” (+0.27/-0.27)

*Indicate rubber colour and type (smooth or grooved).

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

18

www.emac.es

OCCASIONAL USE

Floor-floor Medium load Flush-mounted

COLOCACIÓN NovoJunta Pro® ALUMINIUM Model registered as Community design No 869892-5

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• For joint widths up to 55 mm. (2.17”) • Admission of movement up to 20 mm. (0.79”) • Replaceable rubber.

• Safe and easy attachment thanks to the perforated profiles.

Materials and technical details • Natural aluminium profiles, perforated on their base to receive the fastenings.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Shims are available to facilitate alignment between profiles in the installation.

• They can be installed between pavings of different heights/ thicknesses, combining aluminium attachment flanges with different heights (h).

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours

Black 9005

Novojunta Pro® Aluminium h:20 mm.

Novojunta Pro® Aluminium h:35 mm y h:50 mm c b

c b

h

h

a

REFERENCE

JOINT WIDTH (a)

a

VISIBLE WIDTH (b)

JOINTS UP TO 30 mm WIDE NJPAL2034 NJPAL3534* 30 mm (1.18”) 34 mm (1.34”) NJPAL5034* JOINTS UP TO 40 mm WIDE NJPAL2044 NJPAL3544* 40 mm (1.57”) 44 mm (1.73”) NJPAL5044* JOINTS UP TO 55 mm WIDE NJPAL3559* 55 mm (2.17”) 59 mm (2.32”) NJPAL5059* * By adding a central reinforcement piece, it bears medium loads.

www.emac.es

TOTAL WIDTH (c)

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION Horizontal

87 mm (3.42”) 130 mm (5.12”) 130 mm (5.12”)

20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)

grooved

10 mm (+5/-5) 0.39” (+0.19/-0.19)

97 mm (3.82”) 140 mm (5.51”) 140 mm (5.51”)

20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)

grooved

14 mm (+7/-7) 0.55” (+0.27/-0.27)

155 mm (6.10”) 155 mm (6.10”)

35 mm (1.38”) 50 mm (1.97”)

grooved

20 mm (+10/-10) 0.79” (+0.39/-0.39)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

19

NOVOJUNTA PRO® FLUSH-MOUNTED PERIMETER Model registered as Community design No 869888-1

Floor-wall Flush-mounted

• Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.). It is the perfect complement to the Novojunta Pro@ Aluminium.

• For joint widths up to 42 mm (1.65”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

• Safe and easy attachment thanks to the perforated profiles.

Materials and technical details • Natural aluminium profiles, perforated on their base to receive the fastenings.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Rubber colours

Black 9005

Novojunta Pro® flush-mounted perimeter

b h a

REFERENCE JOINTS UP TO 34 mm WIDE NJPPS2032 NJPPS3532 NJPPS5032 JOINTS UP TO 50 mm WIDE NJPPS2042 NJPPS3542 NJPPS5042

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION Horizontal

32 mm (1.26”)

32 mm (1.26”)

20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)

grooved

10 mm (+5/-5) 0.39” (+0.19/-0.19)

42 mm (1.65”)

42 mm (1.65”)

20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)

grooved

14 mm (+7/-7) 0.55” (+0.27/-0.27)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

20

www.emac.es

OCCASIONAL USE

Floor-floor Medium-heavy load Flush-mounted

NOVOJUNTA COLOCACIÓN PRO® L50

• Expansion joints for flooring (concrete, terrazo, stone, etc.).

• For joint widths up to 50 mm (1.97”).

• Admission of movement up to 20 mm (0.79”).

Replaceable rubber.

Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

Materials and technical details • Aluminium L-shaped profiles, perforated on their base to receive the fastenings.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements.

Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours Black 9005

Novojunta Pro® L50

Grey 7035

c b

h a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION Smooth rubber

EXPANSION Grooved rubber

NJPL50AL35NA NJPL50AL50NA NJPL50AL80NA

50 mm (1.97”)

55 mm (2.17”)

155 mm (6.10”)

35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)

smooth or grooved

16 mm (+8/-8) 0.63” (+0.31/-0.31)

20 mm (+10/-10) 0.79” (+0.39/-0.39)

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

21

Floor-floor Medium-Heavy load Flush-mounted

NOVOJUNTA PRO® L55

OCCASIONAL USE

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• For joint widths up to 55 mm. (2.16”) • Admission of movement up to 26 mm. (1.02”) • Replaceable rubber.

• Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled using a system of two-piece joints that act as support for te rubber and allow vertical movement.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements.

Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• It is supplied pre-assembled.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours

Black 9005

Grey 7035

Novojunta Pro® L55

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

NJPL55AL18NA NJPL55AL35NA NJPL55AL50NA NJPL55AL80NA

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION horizontal

EXPANSION vertical

grooved

26 mm (+13/-13) 1.02” (+0.5/-0.5)

12 mm (+6/-6) 0.47” (+0.23/-0.23)

18 mm (0.71”) 55 mm (2.16”)

80 mm (3.15”)

195 mm (7.68”)

35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

22

www.emac.es

OCCASIONAL USE

Floor-floor Medium-heavy load Flush-mounted

NOVOJUNTA COLOCACIÓN PRO® L65

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• For joint widths up to 65 mm (2.59”).

• Admission of movement up to 28 mm (1.1”).

• Replaceable rubber.

• Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled with two solid pieces and a central reinforcement piece that supports the rubber.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements.

Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• It is supplied pre-assembled.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours

Black 9005

Grey 7035

c b

Novojunta Pro® L65

h

a

REFERENCE NJPL65AL35NA NJPL65AL50NA

www.emac.es

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

65 mm (2.59”)

83 mm (3.27”)

205 mm (8.07”)

PROFILE HEIGHT (h) 35 mm (1.38”) 50 mm (1.97”)

RUBBER TYPE

EXPANSION horizontal

EXPANSION vertical

grooved

28 mm (+18/-10) 1.1” (+0.7/-0.4)

20 mm (+10/-10) 0.79” (+0.39/-0.39)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

23

Floor-floor Medium-heavy load Flush-mounted

NOVOJUNTA PRO L85 ®

OCCASIONAL USE

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• For joint widths up to 85 mm (3.35”).

• Admission of movement up to 22 mm (0.86”).

• Replaceable rubber 2x40 mm (2x1.57”) wide.

• Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled using a system of two-piece aluminium joints that allow vertical movement of the joint. The side pieces support a large reinforcement piece that improves the joint’s load capacity and houses the double synthetic rubber pieces of which it consists.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• It is supplied pre-assembled.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours Black 9005

Grey 7035

c

Novojunta Pro® L85

b

h a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

85 mm (3.35”)

111 mm (4.37”)

226 mm (8.9”)

NJPL85AL35NA NJPL85AL50NA NJPL85AL80NA

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION Horizontal

EXPANSION Vertical

grooved

22 mm (+11/-11) 0.86” (+0.43/-0.43)

14 mm (+7/-7) 0.55” (+0.27/-0.27)

35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

24

www.emac.es

OCCASIONAL USE

COLOCACIÓN ® NOVOJUNTA PRO XL105

Floor-floor Medium-heavy load Flush-mounted

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• For joint widths up to 105 mm (4.13”) • Admission of movement up to 26 mm (1.02”).

• Replaceable rubber 2x50 mm (2x1.97”) wide.

• Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled using a system of two-piece aluminium joints that allow vertical movement of the joint. The side pieces support a large reinforcement piece that improves the joint’s load capacity and houses the double synthetic rubber pieces of which it consists.

• Double insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• It is supplied pre-assembled.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours Black 9005

Grey 7035

c b

Novojunta Pro® XL105

h a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

NJPXL105AL35 NJPXL105AL50 NJPXL105AL80

www.emac.es

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION horizontal

EXPANSION vertical

grooved

26 mm (+13/-13) 1.02” (+0.51/-0.51)

14 mm (+7/-7) 0.55” (+0.27/-0.27)

35 mm (1.38”) 105 mm (4.13”)

130 mm (5.12”)

236 mm (9.29”)

50 mm (1.97”) 80 mm (3.15”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it Emac AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

25

Floor-floor Light-medium load Flush-mounted

NOVOJUNTA PRO XL130 ®

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• For joint widths up to 130 mm (5.11”).

• Admission of movement up to 40 mm (1.57”).

• Replaceable rubber 3x45 mm (3x1.77”) wide.

• Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

Materials and technical details • Aluminium L-shaped profiles, perforated on their base to receive the fastenings and central reinforcement.

• Triple insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• It is supplied pre-assembled.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours Black 9005

Grey 7035

c b

Novojunta Pro® XL130

h

a

REFERENCE NJPXL130AL35 NJPXL130AL50

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

130 mm (5.12”)

155 mm (6.10”)

274 mm (10.79”)

PROFILE HEIGHT (h) 35 mm (1.38”) 50 mm (1.97”)

RUBBER TYPE

EXPANSION horizontal

EXPANSION vertical

grooved

40 mm (+20/-20) 1.57” (+0.78/-0.78)

14 mm (+7/-7) 0.55” (+0.27/-0.27)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

26

www.emac.es

Floor-floor Heavy load Flush-mounted ES TA N CA

• Watertight joint.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• For joint widths up to 80 mm (3.15”).

• Admission of movement up to 60 mm (2.36”).

• Capacity to support heavy loads.

• Ideal for hygienic zones.

NOVOJUNTA PRO® WP80

Materials and technical details • Structure manufactured of solid steel.

• Anti-vibration rubber.

• Elastic insert of EPDM rubber with a second additional WOLFIN IB waterproofing membrane.

• Special interchangeable thermoplastic membranes compatible with bituminous sheets or PVC membranes.

• Covered with stainless steel profiles AISI 304 of 2-mm thickness.

• Resistant to atmospheric agents and changes in temperature from -35ºC to +120ºC. • It is supplied pre-assembled.

• Installed using metal No. 7 plugs spaced every 30 cm (11.8”).

• The complete kit includes all fastenings.

• We recommend attaching in a staggered fashion.

• Optional: firestop cord.

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. Important note: this joint requires technical assessment for installation. The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours Black 9005

Novojunta Pro® WP80

c b h

a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

80 mm (3.15”)

135 mm (5.31”)

275 mm (10.82”)

NJPWP80AL54N NJPWP80AL64N NJPWP80AL94N

www.emac.es

PROFILE HEIGHT (h) 54 mm (2.12”) 64 mm (2.52”) 94 mm (3.7”)

EXPANSION horizontal

EXPANSION vertical

60 mm (+30/-30) 2.36” (+0.18/-0.18)

30 mm (+15/-15) 1.18” (+0.59/-0.59)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

27

28

6. FLUSH-MOUNTED JOINTS – ALL METAL

u 29

Floor-floor Light-medium load Flush-mounted

NOVOJUNTA PRO AL30 RS ®

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, stone, etc.).

• For joint widths up to 30 mm (1.18”).

• Admission of movement up to 9.4 mm.

Materials and technical details • Joint formed of aluminium profiles.

• System with the capacity to absorb multidirectional movements • Profiles supplied in standard lengths of 2.5 m (98.4”).

• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

Anodised matt silver

c b

Novojunta Pro® AL30 RS

h a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

NJPAL30RSPL

30 mm (1.18”)

32.5 mm (1.279”)

84 mm (3.3”)

12.5 mm (0.49”)

9.4 mm (+4.7/-4.7) 0.37” (+0.18/-0.18)

5 mm (+2.5/-2.5) 0.19” (+0.1/+0.1)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

30

www.emac.es

Floor-floor Very heavy load Flush-mounted

® NOVOJUNTA PROCOLOCACIÓN MOBILE Model registered as Community design No 869889-2

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• Grooved, anti-slip surface • For joint widths up to 50 mm (1.97”).

• Admission of movement up to 10 mm (0.39”).

Materials and technical details • Aluminium profiles, perforated on their base to receive the fastenings.

• System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 2.5 m (98.4”).

• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity

• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

Natural

Anodised matt silver

Novojunta Pro® Mobile

REFERENCE NJPMAL2071 NJPMAL2071PL NJPMAL3571 NJPMAL3571PL NJPMAL5071 NJPMAL5071PL NJPMAL7071 NJPMAL7071PL

www.emac.es

FINISH

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

Natural Natural Natural Anodised matt silver Natural Anodised matt silver

EXPANSION horizontal

20 mm (0.79”)

Anodised matt silver Anodised matt silver

PROFILE HEIGHT (h)

35 mm (1.38”) 50 mm (1.97”)

71 mm (2.79”)

154 mm (6.06”) 50 mm (1.97”)

10 mm (+5/-5) 0.39” (+0.19/-0.19)

70 mm (2.75”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

31

Floor-floor Very heavy load Flush-mounted

NOVOJUNTA PRO METAL 50 ®

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• It bears the weight of large loads (trucks, forklifts and pallet trucks).

• Grooved, anti-slip surface • For joint widths up to 50 mm (1.97”).

• Admission of movement up to 20 mm (0.79”).

• Ideal for warehouses, airports, shopping centres, parking facilities, etc.

Materials and technical details Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

• Aluminium profiles, perforated on their base to receive the fastenings.

• System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 3 m (98.4”).

• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.

• Installation using metal expansion bolts spaced every 30 cm (11.8”).

• The complete kit includes all fastenings.

• We recommend attaching in a staggered fashion.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Natural

Novojunta Pro® Metal 50

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

NJPM50AL18NA NJPM50AL35NA NJPM50AL50NA NJPM50AL80NA

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

20 mm (+10/-10) 0.79” (+0.39/-0.39)

10 mm (+5/-5) 0.39” (+0.19/-0.19)

18 mm (0.71”) 50 mm (1.97”)

75 mm (2.95”)

190 mm (7.48”)

35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

32

www.emac.es

Floor-floor Very heavy load Flush-mounted

NOVOJUNTA PRO® COLOCACIÓN METAL 60

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• It bears the weight of large loads (trucks, forklifts and pallet trucks).

• Grooved, anti-slip surface • Visible surface without holes to avoid the accumulation of dirt and noise.

• For joint widths up to 60 mm (2.36”).

• Admission of movement up to 30 mm (1.18”).

Materials and technical details • Aluminium profiles, perforated on their base to receive the fastenings.

• System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 3 m (98.4”).

• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.

• Installation using metal expansion bolts spaced every 30 cm (11.8”).

• The complete kit includes all fastenings.

• We recommend attaching in a staggered fashion.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available Natural

Novojunta Pro® Metal 60

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

NJPM60AL18NA NJPM60AL35NA NJPM60AL50N3 NJPM60AL80NA

www.emac.es

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

30 mm (+15/-15) 1.18”(+0.59/-0.59)

12 mm (+6/-6) 0.47”(+0.23/-0.23)

18 mm (0.71”) 60 mm (2.36”)

80 mm (3.15”)

195 mm (7.68”)

35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

33

Floor-floor Very heavy load Flush-mounted

NOVOJUNTA PRO® METAL80

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• It bears the weight of large loads (trucks, forklifts and pallet trucks).

• Grooved, anti-slip surface • Visible surface without holes to avoid the accumulation of dirt and noise.

• For joint widths up to 80 mm (3.15”).

• Admission of movement up to 40 mm (1.57”).

Materials and technical details Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

• Aluminium profiles, perforated on their base to receive the fastenings.

• System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 3 m (98.4”).

• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.

• Installation using metal expansion bolts spaced every 30 cm (11.8”).

• The complete kit includes all fastenings.

• We recommend attaching in a staggered fashion.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Natural

c b

Novojunta Pro® Metal 80

h a

REFERENCE NJPM80AL50N3 NJPM80AL80NA

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

80 mm (3.15”)

110 mm (4.33”)

250 mm (9.84”)

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

50 mm (1.97”)

440 mm (+20/-20) 1.57” (+0.78/-0.78)

10 mm (+5/-5) 0.39” (+0.19/-0.19)

80 mm (3.15”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

34

www.emac.es

COLOCACIÓN NOVOJUNTA PRO® METAL SIS110

Floor-floor Heavy load Flush-mounted SE IS M IC

• Great expansion. Ideal for areas of seismic risk.

• Admission of movement up to 40 mm (1.57”).

• For joint widths up to 110 mm (4.33”).

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• It bears the weight of large loads (trucks).

• Grooved, anti-slip surface.

Materials and technical details • Aluminium profiles, perforated on their base to receive the fastenings.

• System with the capacity to absorb large multidirectional movements.

• Profiles supplied in standard lengths of 3 m (118.1”).

• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.

• Attachment to the floor structure or floor slab using metal expansion bolts.

• The complete kit includes all fastenings.

• We recommend attaching in a staggered fashion.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 200 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

Natural

Novojunta Pro® Metal SIS110

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

NJPM110S18NA NJPM110S35NA NJPM110S50NA NJPM110S80NA

www.emac.es

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

40 mm (+20/-20) 1.57” (+0.78/-0.78)

20 mm (+10/-10) 0.79” (+0.39/-0.39)

18 mm (0.71”) 110 mm (4.33”)

130 mm (5.12”)

250 mm (9.84”)

35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

35

Floor-floor Very heavy load Flush-mounted

SE IS M IC

NOVOJUNTA PRO® METAL 125

• Great expansion. Ideal for areas of seismic risk.

• Admission of movement up to 60 mm (2.36”).

• For joint widths up to 125 mm (4.92”).

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• It bears the weight of large loads (trucks, forklifts and pallet trucks).

• Grooved, anti-slip surface

Materials and technical details Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 7 kg/mm.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

Natural

• Aluminium profiles, perforated on their base to receive the fastenings.

• System with the capacity to absorb large multidirectional movements • Profiles supplied in standard lengths of 3 m (118.1”).

• It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face.

• Attachment to the floor structure or floor slab using metal expansion bolts.

• A full metre includes all fastenings.

• We recommend attaching in a staggered fashion.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Novojunta Pro® Metal 125

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

125 mm (4.92”)

140 mm (5.51”)

260 mm (10.23”)

NJPM125AL35N NJPM125AL50N NJPM125AL80N

PROFILE HEIGHT (h) 35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)

EXPANSION horizontal

EXPANSION vertical

60 mm (+30/-30) 2.36” (+1.18/-1.18)

20 mm (+10/-10) 0.79” (+0.39/-0.39)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

36

www.emac.es

NOVOJUNTA PRO®COLOCACIÓN METAL SIS

• Great expansion. Ideal for areas of seismic risk.

• Admission of movement up to 60 mm (2.36”).

• For joint widths up to 200 mm (7.87”).

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• It bears the weight of large loads (trucks, forklifts and pallet trucks).

• Grooved, anti-slip surface • Visible surface without holes to avoid the accumulation of dirt and noise.

SE IS M IC

Floor-floor Very heavy load Flush-mounted

Materials and technical details • Joint formed of slippery aluminium profiles. Movement is ensured by a double hinge sliding along retractable guides thanks to which the transit surface remains flat and stepless.

• System with the capacity to absorb large multi-directional movements • Profiles supplied in standard lengths of 3 m (118.1”).

• It is supplied pre-assembled with protective film on the visible face.

• Installed using metal plugs spaced every 30 cm (11.8”).

• A full metre includes all fastenings.

• Attachment of the system 6 cm (2.36”) from the border of the joint has been studied to preserve the adjacent paving.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 600 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 30 kN with contact pressure of 1 N/mm2.

• Vulkollan wheel of 30 kN with contact pressure of 6 N/mm2.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available Natural

Novojunta Pro® Metal SIS b

a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

NJPMSIS50NA

50 mm (1.97”)

255 mm (10.03”)

NJPMSIS100NA

100 mm (3.94”)

305 mm (12”)

NJPMSIS150NA

150 mm (5.9”)

360 mm (14.17”)

NJPMSIS200NA

200 mm (7.87”)

410 mm (16.14”)

www.emac.es

PROFILE HEIGHT (h)

EXPANSION Horizontal

EXPANSION Vertical

20 mm (0.79”)

60 mm (+30/-30) 2.36” (+1.18/-1.18)

50 mm (+25/-25) 1.97” (+0.98/-0.98)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

37

NOVOJUNTA PRO SISMO SU Patent pending ®

Floor-floor Very heavy load Flush-mounted

SE IS M IC

• Great expansion. Ideal for areas of seismic risk.

• Admission of movement up to 130 mm (5.11”).

• For joint widths up to 100 mm (3.94”).

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• Grooved, anti-slip surface.

Materials and technical details

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 600 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 7 kg/mm.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

Anodised matt silver

• Joint formed of slippery aluminium profiles in anodised matt silver.

• System with the capacity to absorb large multidirectional movements • Profiles supplied in standard lengths of 2.5 m (98.4”).

• It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord, and watertight membrane (only some references. Ask Us).

See our explanatory video by capturing this QR code on your smartphone or going to our corporate channel on YouTube (http://www.youtube.com/user/ emaccomplementos).

Novojunta Pro® SISMO SU

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

NJPSUALPL25

100 mm (3.94”)

367.7 mm (14.48”)

21.6 mm (0.85”)

130 mm (+65/-65) 5.11” (+2.55/-2.55)

12 mm (+6/-6) 0.47” (+0.23/-0.23)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

38

www.emac.es

7. JOINTS OF SPECIAL WIDTHS

u 39

JOINTS OF SPECIAL COLOCACIÓN WIDTHS

!

www.emac.es

40

We offer specific solutions for joints of large dimensions, up to 400 mm (15.75”) wide.

Request more information from our Technical Department.

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

8. OVERLAID JOINTS

u 41

® NOVOJUNTA PRO AL30 Model registered as Community design No 1815762-0001

Floor-floor Light-medium load Overlaid • Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• Grooved, anti-slip surface.

• For joint widths up to 30 mm (1.18”).

• Admission of movement up to 9.4 mm (0.37”).

Materials and technical details • Joint formed of slippery aluminium profiles.

• System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available Anodised matt silver

Novojunta Pro® AL30 b h

a

h

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

NJPAL30PL25

30 mm (1.18”)

82 mm (3.29”)

3.8 mm (0.15”)

9.4 mm (+4.7/-4.7) 0.36” (+0.18/-0.18)

5 mm (+2.5/-2.5) 0.19” (+0.09/-0.09)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

42

www.emac.es

NOVOJUNTACOLOCACIÓN PRO® AL30 PERIMETER

Floor-wall, wall-wall wall-roof Overlaid • Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.).

• Grooved, anti-slip surface.

• For joint widths up to 32 mm (1.26”).

• Admission of movement up to 9.4 mm (0.37”).

Materials and technical details • Joint formed of slippery aluminium profiles.

• System with the capacity to absorb multi-directional movements.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Finishes available

Anodised matt silver

Novojunta Pro® AL30 Perimeter

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

NJPPAL30PL

32 mm (1.26”)

56 mm (2.2”)

3.8 mm (0.15”)

9.4 mm (+4.7/-4.7) 0.36” (+0.18/-0.18)

5 mm (+2.5/-2.5) 0.19” (+0.09/-0.09)

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

43

® NOVOJUNTA PRO DECOR Model registered as Community design No 869890-3

Floor-floor Light load Overlaid • Expansion joint and joint cover for floors, walls and roofs.

• For joint widths up to 30 mm (1.18”).

• Admission of movement up to 29.1 mm (1.14”).

• Grooved, anti-slip surface

Materials and technical details • Anodised aluminium profile.

• Interior body of EPDM rubber with an excellent capacity for absorbing tensions and deformations.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Finishes available

Natural

Anodised matt silver

Novojunta Pro® Decor

b h a

REFERENCE NJPDAL2070 NJPDAL2070PL NJPDAL2070 NJPDAL2070PL

FINISH Natural Anodised matt silver Natural Anodised matt silver

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

12.6 mm (0.5”) 70 mm (2.75”)

20 mm (0.79”)

30 mm (0.79”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

44

EXPANSION Horizontal 3.4 mm (+1.7/-1.7) 0.13” (+0.06/-0.06) 29.1 mm (+19.1/-8) 1.14” (+0.74/-0.39)

www.emac.es

NOVOJUNTA PRO®COLOCACIÓN BASIC SP

Floor-floor Light-medium load Overlaid

Load capacity

• Expansion joints for flooring (ceramics, concrete, terrazo, stone, etc.).

• For joint widths up to 45 mm (1.77”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

• Grooved, anti-slip surface

• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours

Materials and technical details • Light aluminium L-shaped profiles.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements.

Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord.

REFERENCE

JOINT WIDTH (a)

Black 9005

Grey 7035

Beige 1013

SMOOTH GROOVED

Novojunta Pro® Basic SP

VISIBLE WIDTH (b)

RUBBER TYPE

EXPANSION Smooth rubber

EXPANSION Grooved rubber 10 mm (+5/-5) 0.39” (+0.19/-0.19)

NJPBS20*

20 mm (0.79”)

124 mm (4.88”)

smooth or grooved

8 mm (+4/-4) 0.31” (+0.15/-0.15)

NJPBS30*

30 mm (1.18”)

134 mm (5.28”)

smooth or grooved

10 mm (+5/-5) 0.39” (+0.19/-0.19)

12 mm (+6/-6) 0.47” (+0.23/-0.23)

NJPBS40*

40 mm (1.57”)

144 mm (5.67”)

smooth or grooved

12 mm (+6/-6) 0.47” (+0.23/-0.23)

14 mm (+7/-7) 0.55” (+0.27/-0.27)

*Indicate rubber colour and type (smooth or grooved).

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

45

NOVOJUNTA PRO® ANTI-SLIP

Floor-floor Medium load Overlaid

Model registered as Community design No 869891-4

• Expansion joints for flooring (ceramics, concrete, terrazo, stone, etc.).

• For joint widths up to 44 mm (1.73”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

• Grooved, anti-slip surface.

Materials and technical details

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

• Light aluminium L-shaped profiles.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements.

Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Finishes available PROFILES:

RUBBERS Black 9005

Natural

Anodised matt silver

Novojunta Pro® Anti-Slip

REFERENCE

FINISH

NJPADAL2087

Natural

NJPADAL2087PL NJPADAL2097 NJPADAL2097PL

Anodised matt silver Natural Anodised matt silver

JOINT WIDTH (a)

VISIBLE WIDTH (b)

34 mm (1.34”)

87 mm (3.42”)

44 mm (1.73”)

97 mm (3.82”)

PROFILE HEIGHT (h)

20 mm (0.79”)

RUBBER TYPE

grooved

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

46

EXPANSION horizontal 10 mm (+5/-5) 0.39” (+0.19/-0.19) 14 mm (+7/-7) 0.55” (+0.27/-0.27)

www.emac.es

Floor-wall Overlaid

NOVOJUNTA PRO® OVERLAIDCOLOCACIÓN PERIMETER Model registered as Community design No 869888-1

• Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.). It is the perfect complement to the Novojunta Pro@ Aluminium.

• For joint widths up to 44 mm (1.73”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

Materials and technical details • Aluminium profiles.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Optional: firestop cord.

Rubber colours

Black 9005

Novojunta Pro® Overlaid perimeter

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION horizontal

NJPPS2058

34 mm (1.34”)

58 mm (2.28”)

20 mm (0.79”)

grooved

10 mm (+5/-5) 0.39” (+0.19/-0.19)

NJPPS2068

44 mm (1.73”)

68 mm (2.68”)

20 mm (0.79”)

grooved

14 mm (+7/-7) 0.55” (+0.27/-0.27)

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

47

NOVOJUNTA PRO SP ®

Floor-floor Medium-heavy load Overlaid

OCCASIONAL USE

• Expansion joints for flooring (concrete, terrazo, stone, etc.).

• For joint widths up to 50 mm (1.97”).

• Admission of movement up to 20 mm (0.79”).

• Replaceable rubber.

• Grooved, anti-slip surface

Materials and technical details • Light aluminium L-shaped profiles.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements.

Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are grooved and supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord.

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN. • Occasionally suitable for forklifts (DIN 1055) or light pallet trucks traffic.

Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours

Black 9005

Grey 7035

Novojunta Pro® SP

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

NJPSP35

35 mm (1.38”)

145 mm (5.7”)

NJPSP40

40 mm (1.57”)

150 mm (5.90”)

NJPSP50

50 mm (1.97”)

160 mm (6.3”)

PROFILE HEIGHT (h)

RUBBER TYPE

14 mm (+7/-7) 0.55” (+0.27/-0.27) 13 mm (0.51”)

grooved

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

48

EXPANSION Horizontal

16 mm (+8/-8) 0.63” (+0.31/-0.31) 20 mm (+10/-10) 0.79” (+0.39/-0.39)

www.emac.es

• Great expansion. Ideal for areas of seismic risk.

• Admission of movement up to 65 mm (2.55”).

• For joint widths up to 74 mm (2.91”).

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.).

SE IS M IC

NOVOJUNTA PRO® COLOCACIÓN SISMO PE

Floor-wall Overlaid

Materials and technical details • Joint formed of slippery aluminium profiles in anodised matt silver.

• System with the capacity to absorb large multidirectional movements • Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Finishes available

Anodised matt silver

Novojunta Pro® Sismo PE

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

EXPANSION horizontal

EXPANSION vertical

NJPPEALPL25

74 mm (2.91”)

193.5 mm (7.62”)

65 mm (+32.5/-32.5) 2.55” (+1.27/-1.27)

10 mm (+5/-5) 0.39” (+0.19/-0.19)

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

49

NOVOJUNTA PRO® METAL SP90 SE IS M IC

Floor-floor Medium-heavy load Overlaid

OCCASIONAL USE

• Great expansion. Ideal for areas of seismic risk.

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.).

• Grooved, anti-slip surface.

• For joint widths up to 90 mm (3.54”).

• Admission of movement up to 30 mm (1.18”).

Materials and technical details

Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 90 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 35 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.

• Joint formed of slippery aluminium profiles.

• System with the capacity to absorb large multidirectional movements.

• Great resistance to wear from friction.

• Profiles supplied in standard lengths of 3 m (118.1”).

• Supplied pre-assembled with protective film on the visible face.

• A full metre includes all fastenings.

• Optional: firestop cord.

Rubber colours

Natural

Novojunta Pro® Metal SP90

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

EXPANSION Horizontal

NJPMSP90NA

90 mm (3.54”)

230 mm (9.05”)

15 mm (0.59”) 0.59” (+0.29/-0.29)

30 mm (+15/-15) 1.18” (+0.59/-0.59)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

50

www.emac.es

9. VERTICAL JOINTS

u 51

® NOVOJUNTA PRO AL30 Model registered as Community design No 1815762-0001

Wall/Wall Overlaid

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints in walls.

• For joint widths up to 30 mm (1.18”).

• Admission of movement up to 9.4 mm (0.37”).

Materials and technical details • Joint formed of slippery aluminium profiles.

• System with the capacity to absorb multi-directional movements.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Finishes available

Anodised matt silver

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Novojunta Pro® AL30

b h

a

h

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

NJPAL30PL25

30 mm (1.18”)

82 mm (3.23”)

3.8 mm (0.15”)

9.4 mm (+4.7/-4.7) 0.37” (+0.18/-0.18)

5 mm (+2.5/-2.5) 0.2” (+0.1/-0.1)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

52

www.emac.es

NOVOJUNTA PRO®COLOCACIÓN AL30 RS

Wall/Wall Flush-mounted

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Expansion joints in floors and walls.

• For joint widths up to 30 mm (1.18”).

• Admission of movement up to 9.4 mm (0.37”).

Materials and technical details • Joint formed of aluminium profiles.

• System with the capacity to absorb multi-directional movements.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Finishes available

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Anodised matt silver

Novojunta Pro® AL30 RS

c b h a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

PROFILE HEIGHT (h)

EXPANSION horizontal

EXPANSION vertical

NJPAL30RSPL

30 mm (1.18”)

32.5 mm (1.28”)

84 mm (3.3”)

12.5 mm (0.49”)

9.4 mm (+4.7/-4.7) 0.37” (+0.18/-0.18)

5 mm (+2.5/-2.5) 0.2” (+0.1/-0.1)

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

53

® NOVOJUNTA PRO DECOR Model registered as Community design No 869890-3

Wall/Wall Overlaid

• Expansion joint and joint cover for floors, walls and roofs.

• For joint widths up to 30 mm (1.18”).

• Admission of movement up to 29.1 mm (1.14”).

Materials and technical details • Anodised aluminium profile.

• Interior body of EPDM rubber with an excellent capacity for absorbing tensions and deformations.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Finishes available

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Natural

Anodised matt silver

Novojunta Pro® DECOR

b h a

REFERENCE NJPDAL2070 NJPDAL2070PL NJPDAL2070 NJPDAL2070PL

FINISH Natural Anodised matt silver Natural Anodised matt silver

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

12.6 mm (0.5”) 87 mm (3.42”)

20 mm (0.79”)

30 mm (1.18”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

54

EXPANSION Horizontal 3.4 mm (+1.7/-1.7) 0.13” (+0.06/-0.06) 29.1 mm (+19.1/-8) 1.14” (+0.74/-0.39)

www.emac.es

NOVOJUNTA PRO®COLOCACIÓN BASIC VT

Wall-wall Flush-mounted

• Expansion joints in walls.

• For joint widths up to 45 mm (1.77”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

• Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.

Materials and technical details • Light aluminium L-shaped profiles, perforated on their base to receive the fastenings.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord.

Rubber colours

Black 9005

Grey 7035

Beige 1013

SMOOTH

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

GROOVED

Novojunta Pro® BASIC VT

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

TOTAL WIDTH (c)

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION Smooth rubber

EXPANSION Grooved rubber

NJPB2012*

20 mm (0.79”)

24 mm (0.94”)

104 mm (4.09”)

12.5 mm (0.49”)

smooth or grooved

8 mm (+4/-4) 0.31” (+0.15/-0.15)

10 mm (+5/-5) 0.39” (+0.19/-0.19)

NJPB3012*

30 mm (1.18”)

34 mm (1.34”)

114 mm (4.49”)

12.5 mm (0.49”)

smooth or grooved

10 mm (+5/-5) 0.39” (+0.19/-0.19)

12 mm (+6/-6) 0.47” (+0.23/-0.23)

NJPB4012*

40 mm (1.57”)

44 mm (1.73”)

124 mm (4.88”)

12.5 mm (0.49”)

smooth or grooved

12 mm (+6/-6) 0.47” (+0.23/-0.23)

14 mm (+7/-7) 0.55” (+0.27/-0.27)

*Indicate rubber colour and type (smooth or grooved).

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

55

NOVOJUNTA PRO® BASIC VT SP

Wall-wall Overlaid • Expansion joints in walls.

• For joint widths up to 45 mm (1.77”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

Materials and technical details • Light aluminium L-shaped profiles.

• Central insert of synthetic rubber with an excellent capacity

Rubber colours

Negro 9005

Gris 7035

Beige 1013

to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface.

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord.

SMOOTH

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

GROOVED

Novojunta Pro® Basic VT SP

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

RUBBER TYPE

EXPANSION Smooth rubber

EXPANSION Grooved rubber

NJPBS20*

20 mm (0.79”)

124 mm (4.88”)

12.5 mm (0.49”)

smooth or grooved

8 mm (+4/-4) 0.31” (+0.15/-0.15)

110 mm (+5/-5) 0.39” (+0.19/-0.19)

NJPBS30*

30 mm (1.18”)

134 mm (5.27”)

12.5 mm (0.49”)

smooth or grooved

10 mm (+5/-5) 0.39” (+0.19/-0.19)

12 mm (+6/-6) 0.47” (+0.23/-0.23)

NJPBS40*

40 mm (1.57”)

144 mm (5.67”)

12.5 mm (0.49”)

smooth or grooved

12 mm (+6/-6) 0.47” (+0.23/-0.23)

14 mm (+7/-7) 0.55” (+0.27/-0.27)

*Indicate rubber colour and type (smooth or grooved).

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

56

www.emac.es

® COLOCACIÓN NOVOJUNTA PRO ANTI-SLIP Model registered as Community design No 869891-4

Wall-wall Overlaid • Expansion joints in walls.

• For joint widths up to 44 mm (1.73”).

• Admission of movement up to 14 mm (0.55”).

• Replaceable rubber.

Materials and technical details • Light aluminium L-shaped profiles.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Colours & Finishes RUBBERS: Black 9005

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

PROFILES:

Natural

Anodised matt silver

Novojunta Pro® Anti-slip

REFERENCE NJPADAL2087 NJPADAL2087PL NJPADAL2097 NJPADAL2097PL

www.emac.es

FINISH Natural Anodised matt silver Natural Anodised matt silver

JOINT WIDTH (a)

VISIBLE WIDTH (b)

34 mm (1.34”)

87 mm (3.42”)

PROFILE HEIGHT (h)

20 mm (0.79”) 44 mm (1.73”)

RUBBER TYPE

grooved

97 mm (3.81”)

EXPANSION horizontal 10 mm (+5/-5) 0.39” (+0.19/-0.19) 14 mm (+7/-7) 0.55” (+0.27/-0.27)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

57

Wall-wall Overlaid Large movements

NOVOJUNTA PRO SISMO PA SE IS M IC

®

• Great expansion. Ideal for areas of seismic risk or high buildings.

• Admission of movement up to 130 mm (5.11”).

• For joint widths up to 100 mm (3.94”).

• Joint manufactured entirely in aluminium.

• Great durability, without maintenance.

• Vertical (walls and façades) or horizontal (roofs) expansion joints.

Materials and technical details

Finishes available

Anodised matt silver

• Joint formed of slippery aluminium profiles in anodised matt silver.

• System with the capacity to absorb large multidirectional movements.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face.

• Optional: firestop cord.

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Novojunta Pro® SISMO PA b h

a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

EXPANSION horizontal

EXPANSION vertical

NJPPAALPL25

100 mm (3.94”)

357.5 mm (14.07”)

130 mm (+65/-65) 5.12” (+2.56/-2.56)

10 mm (+5/-5) 0.39” (+0.19/-0.19)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

58

www.emac.es

NOVOJUNTACOLOCACIÓN PRO® PA

• Great expansion. Ideal for areas of seismic risk or high buildings.

• Admission of movement up to 180 mm (7.09”).

• For joint widths up to 330 mm (12.99”).

• Vertical (walls and façades) or horizontal (roofs) expansion joints.

SE IS M IC

Wall-wall Flush-mounted Large movements

Materials and technical details • Light aluminium L-shaped profiles, perforated on their base to receive the fastenings.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Strip widths available of 40, 85, 145, 190 y 320 mm (1.57”, 3.35”, 5.7”, 7.48” and 12.6”).

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord.

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Rubber colours

Black 9005

Other colours available.

Novojunta Pro® PA

JOINT WIDTH (a)

VISIBLE WIDTH (b)

NJPPA2050

20-50 mm (0.79”-1.97”)

60 mm (2.36”)

40 mm (+20/-20) 1.57” (+0.78/-0.78)

NJPPA50100

50-100 mm (1.97”-3.94”)

105 mm (4.13”)

70 mm (+35/-35) 2.75” (+1.37/-1.37)

NJPPA100160

100-160 mm (3.94”-6.3”)

165 mm (6.5”)

NJPPA120200

120-200 mm (4.72”-7.87”)

210 mm (8.27”)

140 mm (+70/-70) 5.51” (+2.75/-2.75)

NJPPA200330

200-330 mm (7.87”-12.99”)

340 mm (13.38”)

180 mm (+90/-90) 7.09” (+3.54/-3.54)

REFERENCE

www.emac.es

PROFILE HEIGHT (h)

15 mm (0.59”)

RUBBER TYPE

grooved

EXPANSION

100 mm (+50/-50) 3.94” (+1.97/-1.97)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

59

Wall-wall Overlaid Large movements

NOVOJUNTA PRO PASP SE IS M IC

®

• Great expansion. Ideal for areas of seismic risk or high buildings.

• Admission of movement up to 180 mm (7.09”).

• For joint widths up to 360 mm (14.17”).

• Vertical (walls and façades) or horizontal (roofs) expansion joints.

Materials and technical details • Matt silver anodised aluminium profiles, perforated on their base to receive the fastenings.

• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC).

• Strip widths available of 40, 85, 145, 190 y 320 mm (1.57”, 3.35”, 5.7”, 7.48” and 12.6”).

• Profiles supplied in standard lengths of 3 m (118.1”).

• The rubber parts are supplied in continuous rolls.

• The complete kit includes all fastenings.

• Optional: firestop cord.

Rubber colours

Black 9005

Other colous available.

Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.

Novojunta Pro® PASP

b h a

REFERENCE

JOINT WIDTH (a)

VISIBLE WIDTH (b)

PROFILE HEIGHT (h)

NJPASP2060

20-60 mm (0.79”-2.36”)

110 mm (4.33”)

40 mm (+20/-20) 1.57” (+0.78/-0.78)

NJPASP50120

50-120 mm (1.97”-4.72”)

155 mm (6.10”)

70 mm (+35/-35) 2.75” (+1.37/-1.37)

NJPASP110180

110-180 mm (4.33”-7.09”)

215 mm (8.46”)

NJPASP120240

120-240 mm (4.72”-9.45”)

260 mm (10.24”)

140 mm (+70/-70) 5.51” (+2.75/-2.75)

NJPASP240360

240-360 mm (9.45”-14.17”)

390 mm (15.35”)

180 mm (+90/-90) 7.09” (+3.54/-3.54)

12 mm (0.47”)

RUBBER TYPE

grooved

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

60

EXPANSION

100 mm (+50/-50) 3.94” (+1.97/-1.97)

www.emac.es

10. WATERTIGHT MEMBRANE

u 61

WATERTIGHT MEMBRANE

• Membrane of EPDM rubber with adhesive incorporated to seal expansion joints that must be watertight.

• They can be installed to complement a system of profiles in an expansion joint, or as an individual product.

• Great elasticity. They allow multi-directional movements.

• Waterproof.

• Resistant to extreme temperatures (-30ºC to +120ºC), diluted acids or moderate concentrates, steam and hot water.

• Does not give off toxic smoke in the event of fire.

REFERENCE

MEMBRANE WIDTH

JOINT WIDTH

PRESENTATION

MEMEST140

140 mm (5.51”)

30 mm (1.18”)

10 or 20 lineal meters rolls

MEMEST170

170 mm (6.69”)

40 mm (1.57”)

10 or 20 lineal meters rolls

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

62

www.emac.es

11. FIRESTOP JOINTS

u

Our firestop joint systems ensure a hermetic seal against flames and hot or inflammable gases, avoiding any chimney effect among construction elements, both horizontally and vertically.

The joints must ensure a degree of fire barrier protection that at least equals the protection on the works for which they are destined.

The combination between mastic, firestop cord and the different finishing systems on joints enables between 2 and 4 hours of fire protection to be achieved.

Our firestop joint systems have surpassed CSTB trials, which certify the duration of isolation of flames and hot gases, as well as thermal insulation.

63

FIRESTOP CORD • For standard and seismic joints from 10 to 200 mm (0.39 - 7.87”) wide, in floors, walls and roofs.

• Cord composed of fireproof, non-biodegradable, mineral fibres, covered in a network of fibreglass hairs.

• Reaction to fire: Class M0 (incombustible).

• Resistance to fire: 240 minutes as per Standard EN 1366-4.

• Pursuant to the most recent European standards and regulations: • Does not absorb humidity.

• Unaffected by the usual aggressive chemical agents.

• Easy to install using refractory glue.

• Does not contain asbestos.

• Chemically neutral, it does not cause toxic gases to escape in the event of fire.

• Use temperature: 780º C • Fusion temperature: 1200º C

REFERENCE

JOINT WIDTH (DISTANCE BETWEEN FRAMES)

CORD DIAMETER

PRESENTATION

NJCF12

10 mm (0.39”)

12 mm (0.47”)

50 m (54.68 yd) roll

NJCF20

15 mm (0.59”)

20 mm (0.79”)

30 m (32.8 yd) roll

NJCF30

20 mm (0.79”)

30 mm (1.18”)

30 m (32.8 yd) roll

NJCF40

25 mm (0.98”)

40 mm (1.57”)

30 m (32.8 yd) roll

NJCF50

35 mm (1.38”)

50 mm (1.97”)

25 m (27.34 yd) roll

NJCF60

40 mm (1.57”)

60 mm (2.36”)

25 m (27.34 yd) roll

NJCF70

50 mm (1.97”)

70 mm (2.75”)

20 m (21.87 yd) roll

NJCF80

55 mm (2.16”)

80 mm (3.15”)

20 m (21.87 yd) roll 18 m (19.6 yd) roll

NJCF90

60 mm (2.36”)

90 mm (3.54”)

NJCF100

70 mm (2.75”)

100 mm (3.94”)

10 m (10.9 yd) roll

NJCF120

80 mm (3.15”)

120 mm (4.72”)

2 m (78.7”) section

NJCF150

100 mm (3.94”)

150 mm (5.90”)

2 m (78.7”) section

NJCF180

120 mm (4.72”)

180 mm (7.09”)

2 m (78.7”) section

For joint widths greater than 120 mm (4.72”), ask us.

FIRESTOP CORD ACCESSORIES REFRACTORY GLUE • To glue cords to the sides of the joint.

• Approximate consumption: 50 g per full linear metre (2 sides).

REFERENCE

CONTAINER SIZE

NJCFCOLA14

1,4 kg.

NJCFCOLA07

7 kg.

FELT JOINTS • Recommended for connecting different cord sections.

• Consumption: 4 units per linear metre REFERENCE

PRESENTATION

NJCFUN300

300 mm (11.8”), 20 m (21.87 yd) roll.

NJCFUN1000

1000 mm (39.37”), 20 m (21.87 yd) roll.

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

64

www.emac.es

FIRESTOP MASTIC • Silicon elastomer, resistant to high temperatures.

• Light grey.

• Density: 1.24.

• Hardness Shore A: 16.

• Expansion capacity until breakage: 450% (DIN53504) • Service temperature: - 50ºC +120ºC. • Good chemical resistance to oxidation, ozone, salt air, bleach, acids and the usual diluted bases and solvents.

• Does not give off toxic smoke in the event of fire.

REFERENCE

PRESENTATION

NJCFMASTIC

Box of 25 x 1/3-litre cartridges

Approximate consumption: MASTIC LAYER

CONSUMPTION X 1/3-LITRE CARTRIDGE

10 mm (0.39”)

8 mm (0.31”)

3.9 m (153.5”)

20 mm (0.79”)

10 mm (0.39”)

1.5 m (59.05”)

30 mm (1.18”)

15 mm (0.59”)

0.7 m (27.56”)

40 mm (1.57”)

20 mm (0.79”)

0.3 m (11.81”)

50 mm (1.97”)

25 mm (0.98”)

0.2 m (7.87”)

JOINT WIDTH

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

65

66

12. RETRACTION JOINTS IN CONCRETE FLOORS AND MORTAR SCREEDS

u 67

NOVOJUNTA® HORMIGONADO • Fractioning joint for controlling and absorbing floor movements, thereby avoiding cracking.

• It controls the expansion and retraction of the concrete in floors up to 24 cm (9.4”) thick.

• Manufactured in PVC and available in heights of 40 (1.6”) and 80 mm (3.15”).

• Easy handling. No need for cutting and sealing.

• Acts as formwork and screed • It does not deteriorate over time.

• Once finished, it is practically invisible.

• Perfect adherence.

Materials and technical details COLOCACIÓN 1. Attach the profiles with some dabs of concrete every 60-80 cm (25-30”).

2. Level and finish attachment leaving the upper third closest to the vertex free.

3. Cut the intersections using a mitre block and hacksaw to ensure the vertices coincide perfectly.

4. Do not place dabs of concrete at the intersections. The closest must be 20- 25 cm (8-10”) away.

5. The profiles are simply joined by inserting a rod or corrugated wire into the gaps in the joints.

6. Concrete pouring: pour either traditionally or by pumping.

7. Straight-edging and floating: do the straight-edging manually and then use the concrete vibrator. This process avoids deterioration of the joint.

8. Finish: leave the joint vertex free for a perfect finish.

REFERENCE

WIDTH (a)

NJHOR80GR25

60 mm (2.36”)

NJHOR40GR25

30 mm (1.18”)

VISIBLE WIDTH (b) 2 mm (0.1”)

HEIGHT PROFILE (h)

QUANTITY X BOX

80 mm (3.15”)

20 bars

40 mm (1.57”)

60 bars

• Hollow, extruded PVC profile in cement grey.

• Approximate weight: 500 g/ml (80 mm / 3.15” model) and 250 g/ml (40 mm / 1.6” model).

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Presentation in cardboard pallet boxes.

Novojunta® Hormigonado

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

68

www.emac.es

COLOCACIÓN NovoJunta Pro® HORMIGONADO • Profile for induction of fractioning for control joints or contraction of concrete works.

• Manufactured in PVC, this protects the concrete by allowing the initial retraction movement and later expansion and contraction movements.

• Once installed, it remains gripped in the concrete.

Novojunta Pro® Hormigonado

REFERENCE

WIDTH (a)

VISIBLE WIDTH (b)

HEIGHT PROFILE (h)

QUANTITY X BOX

NJPHOR40GR25

38 mm (1.5”)

2 mm (0.1”)

40 mm (1.57”)

25 bars

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

69

70

13. JOINT COVERS

u 71

• NOVOTAPAJUNTAS NDP • It protects and beautifies the expansion joints on façades, walls, roofs and floors bearing light traffic.

• Designed to cover joints from 10 to 130 mm wide (0.4”5.12”).

• Fast and easy to install thanks to its clip system, avoiding the use of adhesives and screws.

• For new work or renovations.

• For interior or exterior use.

• This is an ideal profile for all types of buildings: hospitals, shopping centres, airports, hotels, homes, etc.

• Manufactured in anti-UV PVC. • 4 profile models available by width: 50, 70, 90 and 150 mm (2”, 2.8”, 3.5” and 5.9”).

• Flat and angled models.

• Colours available: white (RAL 9016), beige (RAL 1015) and grey (RAL 7035).

INSTALLATION 1. Insert a clip.

2. Change the direction of clips to insert one after another.

3. Prepared for installation.

4. Final placement.

1.

2.

Materials and technical details • Manufactured in PVC according to the latest standards, production conforming to ISO 9001.

• The clips, manufactured in stainless steel, guarantee stable attachment yet permanent flexibility (spring effect). There are 4 models of clip available according to the width of joint to be covered.

• Profiles supplied in standard lengths of 3 m (118”).

• The profile is supplied with the appropriate clip model and in the quantity required (5 clips for each 3-m / 118” profile).

Novotapajuntas NDP Flat

3.

Novotapajuntas NDP Angle

4.

S TYPE

Flat

Angle

L JOINT WIDTH (a)

PROFILE WIDTH (b)

Maximum 35 mm (1.38”)

50 mm (1.97”)

Maximum 50 mm (1.97”)

70 mm (2.75”)

Maximum 70 mm (2.75”)

XL COLOURS AVAILABLE

XXL MODEL OF CLIP

REFERENCE

White, Beige, Grey

S

NTDPP50*3

White, Beige, Grey

S/L

NTDPP70*3

90 mm (3.54”)

White

S / L / XL

NTDPP9OBL

Maximum 130 mm (5.12”)

150 mm (5.90”)

White

S / L / XL / XXL

NTDPP150BL

Maximum 35 mm (1.38”)

50 mm (1.97”)

White, Beige, Grey

S

NTDPP50*3

Maximum 50 mm (1.97”)

70 mm (2.75”)

White, Beige, Grey

S/L

NTDPP70*3

Maximum 70 mm (2.75”)

90 mm (3.54”)

White

S / L / XL

NTDPP90BL

NUMBER OF CLIPS

5

*Indicate colour: White (BL), Beige (BE), Grey (GR).

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

72

www.emac.es

COLOCACIÓN NOVOTAPAJUNTAS NDA • It protects and beautifies the expansion joints on façades, walls, roofs and floors bearing light traffic.

• Designed to cover joints from 10 to 150 mm wide (0.4”5.9”).

• Fast and easy to install thanks to its clip system, avoiding the use of adhesives and screws.

• For new work or renovations.

• For interior or exterior use.

• This is an ideal profile for all types of buildings: hospitals, shopping centres, airports, hotels, homes, etc.

• Manufactured in aluminium.

• 7 profile models available for flat installation: 50, 70, 90, 120, 140, 180 and 210 mm (2”, 2.8”, 3.5”, 4.7”, 5.5”, 7.1” and 8.3”).

• 4 profile models available for angled installation: 50, 70, 90 and 120 mm (2”, 2.8”, 3.5” and 4.7”).

Materials and technical details

INSTALLATION 1. Insert a clip.

2. Change the direction of clips to insert one after another.

3. Prepared for installation.

4. Final placement.

• Manufactured in anodised, extruded aluminium.

• The clips, manufactured in stainless steel, guarantee stable attachment yet permanent flexibility (spring effect). There are 4 models of clip available according to the width of joint to be covered.

• Profiles supplied in standard lengths of 3 m (118”).

• The profile is supplied with the appropriate clip model and in the quantity required for installation to wall or floor.

Novotapajuntas NDA Flat

Flat

Angle

www.emac.es

2.

3.

4.

Novotapajuntas NDA Angle

S TYPE

1.

L JOINT WIDTH (a)

XL PROFILE WIDTH (b)

MODEL OF CLIP

XXL REFERENCE

NUMBER OF CLIPS

10 to 35 mm (0.39” to 1.38”)

50 mm (1.97”)

S

NTDAP50ALNA3

Walls: 4 Floors: 10

35 to 50 mm (1.38” to 1.97”)

70 mm (2.75”)

S/L

NTDAP70ALNA3

Walls: 4 Floors: 10

40 to 70 mm (1.57” to 2.75”)

90 mm (3.54”)

L / XL

NTDAP90ALNA3

Walls: 4 Floors: 10

60 to 90 mm (2.36” to 3.54”)

120 mm (4.72”)

L / XL

NTDAP120ALN3

Walls: 4 Floors: 10

80 to 110 mm (3.15” to 4.33”)

140 mm (5.51”)

XL

NTDAP140ALN3

Walls: 4 Floors: 10

100 to 130 mm (3.94” to 5.12”)

180 mm (7.09”)

XL / XXL

NTDAP180ALN3

Walls: 4 Floors: 10

120 to 150 mm (4.72” to 5.90”)

210 mm (8.27”)

XXL

NTDAP210ALN3

Walls: 4 Floors: 10

10 to 35 mm (0.39” to 1.38”)

50 mm (1.97”)

S

NTDAA50ALNA3

Walls: 4 Floors: 10

35 to 50 mm (1.38” to 1.97”)

70 mm (2.75”)

S/L

NTDAA70ALNA3

Walls: 4 Floors: 10

40 to 70 mm (1.57” to 2.75”)

90 mm (3.54”)

L / XL

NTDAA90ALNA3

Walls: 4 Floors: 10

60 to 90 mm (2.36” to 3.54”)

120 mm (4.72”)

L / XL

NTDAA120ALNA

Walls: 4 Floors: 10

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

73

NOVOTAPAJUNTAS NDAS • This joint cover protects and beautifies the expansion joints on walls and floors.

• Manufactured in matt silver anodised aluminium. Highly decorative.

• It allows the smooth, jolt-free passage of shopping trolleys, wheelchairs, stretchers, etc.

• It is supplied with flexible butyl adhesive for immediate attachment. By order it can also be supplied with countersunk holes on one side.

• Profiles supplied in standard lengths of 3 m (118”).

• Available in 5 sizes: 60, 80, 100, 120 and 140 mm (2.4”, 3.2”, 3.9”, 4.7” and 5.5”).

•• Novotapajuntas NDAS

PROFILE WIDTH (b)

PACKAGING

REFERENCE

60 mm (2.36”)

10 units

NTDAS60ALPL3

80 mm (3.15”)

10 units

NTDAS80ALPL3

100 mm (3.94”)

10 units

NTDAS100ALPL

120 mm (4.72”)

10 units

NTDAS120ALPL

140 mm (5.51”)

10 units

NTDAS140ALPL

NOVOTAPAJUNTAS NCJE • To cover the expansion joints on walls, façades, roofs and floors.

• Manufactured in natural extruded aluminium.

• Visible face grooved anti-slip.

• Allows the passage of intense medium-load traffic.

• Profiles supplied in standard lengths of 3 m (118”).

• Available in 4 sizes: 120, 180, 210 and 320 mm (4.7”, 7.1”, 8.3” and 12.6”).

• Supplied with countersunk holes drilled in one side for screw installation.

•• Novotapajuntas NCJE

JOINT WIDTH (a)

PROFILE WIDTH (b)

REFERENCE

Up to 50 mm (1.97”)

120 mm (4.72”)

NTCJE120ALNA

Up to 100 mm (3.94”)

180 mm (7.09”)

NTCJE180ALNA

Up to 130 mm (5.12”)

210 mm (8.27”)

NTCJE210ALNA

Up to 200 mm (7.87”)

320 mm (12.6”)

NTCJE320ALNA

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

74

www.emac.es

NOVOTAPAJUNTAS GTA ••

• This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors.

• Manufactured in matt silver anodised aluminium. Highly decorative.

• Its visible face is grooved and anti-slip. It is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

• The 80-mm (3.15”) model can also be supplied with incorporated adhesive for fast, easy installation, or with countersunk holes for attachment using screws.

• The 135-mm (5.31”) model can also be supplied with countersunk holes for attachment using screws.

GTA 80

GTA 135

MODEL

JOINT WIDTH (a)

PROFILE WIDTH (b)

PACKAGING

GTA80

Up to 30 mm (1.18”)

80 mm (3.15”)

10 units

GTA135

www.emac.es

Up to 55 mm (2.16”)

135 mm (5.31”)

5 units

INSTALLATION

REFERENCE

Without adhesive

NTGTAL80PL25

With adhesive

NTGTAL80PLAD

With holes

NTGTAL80PLA

Without holes

NTGTAL135PL

With holes

NTGTAL135PLA

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

75

NOVOTAPAJUNTAS TX • • This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors.

• Manufactured in shiny stainless steel AISI-304. Highly decorative.

• This is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

• Also available with adhesive incorporated for fast, easy installation.

Novotapajuntas TX

MODEL

JOINT WIDTH (a)

PROFILE WIDTH (b)

PACKAGING

TX60

Up to 20 mm (0.79”)

60 mm (2.36”)

10 units

TX80

Up to 30 mm (1.18”)

80 mm (3.15”)

10 units

TX100

Up to 40 mm (1.57”)

100 mm (3.94”)

5 units

INSTALLATION Without adhesive With adhesive Without adhesive

REFERENCE NTTXAI60NA NTTXAI60NAAD NTTXAI80NA

With adhesive

NTTXAI80NAAD

Without adhesive

NTTXAI100NA

With adhesive

NTTXAI100NAD

Suelo/pared Carga ligera Enrasada

NOVOTAPAJUNTAS GTX NDAS

• This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors.

• Manufactured in shiny stainless steel AISI-304. Highly decorative.

• High resistance. This is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels.

• Profiles supplied in standard lengths of 2 m (98.4”).

• Supplied with protective film on the visible face.

• Supplied with countersunk holes (10 mm / 0.4” diameter) drilled in one side for screw installation (not included).

Novotapajuntas GTX

MODEL

JOINT WIDTH (a)

PROFILE WIDTH (b)

PACKAGING

REFERENCE

GTX180

Up to 100 mm (3.94”)

180 mm (7.09”)

4 units

NTGTXAI180NA

GTX220

Up to 120 mm (4.72”)

220 mm (8.66”)

4 units

NTGTXAI220NA

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

76

www.emac.es

COLOCACIÓN NOVOSEPARA 10 • Profile of matt silver anodised aluminium, designed for decorative separation between pavings of identical or contrasting finishes, providing the resistance typical of this material.

• Easy to install, it is attached once the pavement has been laid. The upper section covers the joint created by the tiles and their display face, wider and more visible, imbues any environment with an elegant touch.

• This is a perfect profile to install on flexible paving, for example in gymnasiums.

• It is also ideal for covering those joints that have deteriorated over time.

• Available in 2 lengths: 1 m and 2.5 m (39.4” and 98.4”).

Novotapajuntas NDA

www.emac.es

WIDTH (b)

PACKAGING

40 mm (1.57”)

50 units

PROFILE LENGTH

REFERENCE

100 cm (39.4”)

NS10AL40PL1

250 cm (98.4”)

NS10AL40PL25

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

77

78

14. EXPANSION AND FRACTIONING JOINTS FOR PAVING

u 79

NOVOJUNTA® METALLIC • • Fractioning and expansion joint consisting of two aluminium profiles with a central body of EPDM microcellular rubber.

• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.

• Available for paving up to 125 mm (4.9”) thick. For other thicknesses, ask us.

• It allows polishing of the floor after installation.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

• Available in black, grey and marble (up to 30 mm / 1.2” high). Also in brown, white and beige in the model that is 4.5 mm / 0.18” high.

Novojunta® Metallic

General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).

• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).

PROFILE HEIGHT (h)

4.5 mm (0.18”)

6 mm (0.23”)

8 mm (0.31”)

10 mm (0.39”)

12.5 mm (0.49”)

15 mm (0.59”)

VISIBLE WIDTH (a)

6.4 mm (0.25”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

EXPANSION Horizontal

4.5 mm (+0.5/-4) 0.18” (+0.02/-0.16)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

PACKAGING

20 units

20 units

20 units

20 units

3 mm (+1/-2) 0.12” (+0.04/-0.08)

20 units

3 mm (+1/-2) 0.12” (+0.04/-0.08)

20 units

COLOUR White

NJUAL04BL25

Grey

NJUAL04GR25

Beige

NJUAL04BE25

Brown

NJUAL04MA25

Black

NJUAL04NE25

Grey

NJUAL06NA25

Black

NJUAL06NE25

Ivory

NJUAL06MF25

Grey

NJUAL08NA25

Black

NJUAL08NE25

Ivory

NJUAL08MF25

Grey

NJUAL10NA25

Black

NJUAL10NE25

Ivory

NJUAL10MF25

Grey

NJUAL12NA25

Black

NJUAL12NE25

Ivory

NJUAL12MF25

Grey

NJUAL15NA25

Black

NJUAL15NE25

Ivory

NJUAL15MF25

Gris 17,5 mm

80

20 mm

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 3 Quart Poblet, Valencia, Spain • Tel.: (+34) 261 • info@emac.es 8 mm mmde(+1/-2) 20961 ud.532 200 - Fax: (+34) 961 532Negro EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it Marfil EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

8 mm

3 mm (+1/-2)

10 ud.

REFERENCE

NJUAL17NA25 NJUAL17NE25 NJUAL17MF25 www.emac.es

Gris

NJUAL20NA25

Negro

NJUAL20NE25

15 mm

17.5 mm (0.69”)

20 mm (0.79”)

22.5 mm (0.88”)

25 mm (0.98”)

27.5 mm (1.08”)

8 mm

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

20 ud.

20 units

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

Gris

NJUAL15NA25

Negro

NJUAL15NE25

Marfil

NJUAL15MF25

Grey

NJUAL17NA25

Black

NJUAL17NE25

Ivory

NJUAL17MF25

Grey

NJUAL20NA25

Black

NJUAL20NE25

Ivory

NJUAL20MF25

Grey

NJUAL22NA25

Black

NJUAL22NE25

Ivory

NJUAL22MF25

Grey

NJUAL25NA25

Black

NJUAL25NE25

Ivory

NJUAL25MF25

Grey

NJUAL27NA25

Black

NJUAL27NE25

Ivory

NJUAL27MF25

Grey

NJUAL30NA25

Black

NJUAL30NE25

Ivory

NJUAL30MF25

8 mm (0.31”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

41 mm (1.61”)

11 mm (0.43”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

10 units

Black

NJUAL41NA25

51 mm (2.01”)

11 mm (0.43”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

10 units

Black

NJUAL51NA25

125 mm (4.92”)

11 mm (0.43”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

4 units

Black

NJUAL125NA25

30 mm (1.18”)

NOVOJUNTA® METALLIC PERIMETER • Profile for perimeter expansion joints consisting of an aluminium profile with a body of EPDM micro-cellular rubber.

• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.

• Available for paving up to 12 mm (0.47”) thick.

• It allows polishing of the floor after installation.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

• Available in black.

Novojunta® Metallic Perimeter

PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

EXPANSION Horizontal

PACKAGING

COLOUR

REFERENCE

10 mm (0.39”)

6 mm (0.23”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

20 units

Black

NJUPAL10NA

12 mm (0.47”)

6 mm (0.23”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

20 units

Black

NJUPAL12NA

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

81

NOVOJUNTA DECOR® • • Fractioning and expansion joint consisting of two metal profiles with a central body of EPDM micro-cellular rubber.

• Available in shiny stainless steel AISI-304, or in matt silver anodised or natural aluminium.

• This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the inner EPDM body.

• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.

• Available for paving up to 126 mm (4.9”) thick. For other thicknesses, ask us.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

Novojunta Decor® Aluminium

General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).

• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).

MATERIAL

PROFILE HEIGHT (h) 9.5 mm (0.37”)

12 mm (0.47”)

15 mm (0.59”) Aluminium

Stainless steel

VISIBLE WIDTH (a) 12.5 mm (0.49”)

12.5 mm (0.49”)

12.5 mm (0.49”)

EXPANSION Horizontal 3 mm (+1/-2) 0.12” (+0.04/-0.08) 3 mm (+1/-2) 0.12” (+0.04/-0.08) 3 mm (+1/-2) 0.12” (+0.04/-0.08)

Novojunta Decor® Stainless Steel

PACKAGING 20 units

20 units

20 units

FINISH

NJDEAL10NA

Anodised matt silver

NJDEAL10PL

Natural

NJDEAL12NA

Anodised matt silver

NJDEAL12PL

Natural

NJDEAL15NA

Anodised matt silver

NJDEAL15PL

Natural

NJDEAL20NA

Anodised matt silver

NJDEAL20PL

12.5 mm (0.49”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

41 mm (1.61”)

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

10 units

Natural

NJDEAL41NA

51 mm (2”)

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

10 units

Natural

NJDEAL51NA

126 mm (4.96”)

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

4 units

Natural

NJDEAL126NA

10 mm (0.39”)

12.5 mm (0.49”)

3 mm (+1/-2) 0.12” (+0.04/-0.08

20 units

High brightness

NJDEAI10NA

12 mm (0.47”)

17 mm (0.67”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

High brightness

NJDEAI12NA

15 mm (0.59”)

17 mm (0.67”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

High brightness

NJDEAI15NA

20 mm (0.79”)

12.5 mm (0.49”)

3 mm (+1/-2) 0.12” (+0.04/-0.08)

10 units

High brightness

NJDEAI20NA

41 mm (1.61”)

10.8 mm (0.42”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

10 units

High brightness

NJDEAI41NA

51 mm (2”)

10.8 mm (0.42”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

10 units

High brightness

NJDEAI51NA

126 mm (4.96”)

10.8 mm (0.42”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

4 units

High brightness

NJDEAI126NA

20 mm (0.79”)

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

82

REFERENCE

Natural

www.emac.es

COLOCACIÓN ® NOVOJUNTA DECOR XL • Fractioning and expansion joint consisting of two matt silver anodised aluminium profiles with a central body of EPDM micro-cellular rubber.

• This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the inner EPDM body.

• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.

• The central EPDM micro-cellular rubber body, 20 mm (0.79”) thick, allows a great deal of movement. Its size and functionality enables its application as a structural joint.

• Its use is also recommended in façades.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

General recommendations for installation:

Novojunta Decor® XL

• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).

• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 40 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).

HEIGHT PROFILE (h)

VISIBLE WIDTH (a)

EXPANSION Horizontal

PACKAGING

FINISH

REFERENCE

12 mm (0.47”)

28 mm (1.10”)

12 mm (+2/-10) 0.47” (+0.08/-0.39)

10 units

Anodised matt silver

NJDEXLAL12PL

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

83

NOVOJUNTA® METALLIC FLECHA • • Arrow-shaped fractioning and expansion joint, designed to be installed in conjunction with thick paving.

• It consists of two natural aluminium profiles and a central body of EPDM micro-cellular rubber, with an excellent capacity for absorbing the contractions and expansions of the paving.

• This movement joint is especially conceived for installing paving using traditional mortar. We recommend installing it slightly below the level of the paving, to enable the floor to be polished.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

Novojunta® Metallic flecha

General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).

• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).

HEIGHT PROFILE (h)

VISIBLE WIDTH (a)

EXPANSION Horizontal

PACKAGING

REFERENCE

26 mm (1.02”)

30 units

NJFAL26NA

35 mm (1.38”)

30 units

NJFAL35NA

50 mm (1.97”)

20 units

NJFAL50NA

65 mm (2.56”)

11 mm (0.43”)

FINISH

Natural

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)

10 units

NJFAL65NA

85 mm (3.35”)

10 units

NJFAL85NA

125 mm (4.92”)

5 units

NJFAL125NA

NOVOJUNTA® JSI • Profile with a body manufactured in PVC and a central clipped area manufactured in aluminium.

• It is used as a dividing joint between paving and can be installed in all type of surfaces.

• It can be attached before or after installing the paving.

• It allows later polishing.

• Profiles supplied in standard lengths of 3 m (118”).

Novojunta® JSI

HEIGHT PROFILE (h)

VISIBLE WIDTH (a)

PACKAGING

REFERENCE

30 mm (1.18”)

6 mm (0.23”)

10 units

NJS1630AL3

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

84

www.emac.es

COLOCACIÓN NOVOJUNTA® DECOR FLECHA • Arrow-shaped fractioning and expansion joint, designed to be installed in conjunction with thick paving.

• It consists of two metal profiles and a central body of EPDM micro-cellular rubber, with an excellent capacity for absorbing the contractions and expansions of the paving.

• Available in shiny stainless steel, or in matt silver anodised or natural aluminium.

• This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the inner EPDM body.

• Especially for installing paving using traditional mortar.

We recommend installing it slightly below the level of the paving, to enable the floor to be polished.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

Novojunta® Decor flecha Aluminium

General recommendations for installation:

Stainless steel

• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).

• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).

MATERIAL

PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

EXPANSION Horizontal

PACKAGING

30 mm (1.18”)

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

30 units

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

50 mm (1.97”)

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

30 units

65 mm (2.56”)

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

10 units

35 mm (1.38”)

Aluminium

85 mm (3.35”)

www.emac.es

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

10 units

REFERENCE

Natural

NJDFAL30NA

Anodised matt silver

NJDFAL30PL

Natural

NJDFAL35NA

Anodised matt silver

NJDFAL35PL

Natural

NJDFAL50NA

Anodised matt silver

NJDFAL50PL

Natural

NJDFAL65NA

Anodised matt silver

NJDFAL65PL

Natural

NJDFAL85NA

Anodised matt silver

NJDFAL85PL

Natural

NJDFAL125NA

Anodised matt silver

NJDFAL125PL

12.5 mm (0.49”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

5 units

30 mm (1.18”)

10.8 mm (0.42”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

30 units

High brightness

NJDFAI30NA

35 mm (1.38”)

10.8 mm (0.42”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

30 units

High brightness

NJDFAI35NA

50 mm (1.97”)

10.8 mm (0.42”)

4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))

30 units

High brightness

NJDFAI50NA

125 mm (4.92”)

Stainless steel

12.5 mm (0.49”)

30 units

FINISH

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

85

NOVOJUNTA® 1 PVC • • Fractioning and expansion joint manufactured in

co-extruded PVC, formed of one rigid PVC part that efficiently protects the paving borders, and another flexible PVC part that enables surface tensions to be absorbed.

• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.

• It is suitable for supporting all load types.

• Available in 5 colours: white, grey, beige, brown and black.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• If the floor will be polished, we recommend installing it slightly below the pavement level.

Novojunta® 1 PVC

General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).

• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 40 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).

HEIGHT PROFILE (h)

25 mm (0.98”)

30 mm (1.18”)

35 mm (1.38”)

40 mm (1.57”)

50 mm (1.97”)

VISIBLE WIDTH (a)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

EXPANSION Horizontal

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

PACKAGING

50 units

50 units

50 units

25 units

25 units

COLOUR

REFERENCE

White

NJ1PV25BL

Grey

NJ1PV25GR

Beige

NJ1PV25BE

Brown

NJ1PV25MA

Black

NJ1PV25NE

White

NJ1PV30BL

Grey

NJ1PV30GR

Beige

NJ1PV30BE

Brown

NJ1PV30MA

Black

NJ1PV30NE

White

NJ1PV35BL

Grey

NJ1PV35GR

Beige

NJ1PV35BE

Brown

NJ1PV35MA

Black

NJ1PV35NE

White

NJ1PV40BL

Grey

NJ1PV40GR

Beige

NJ1PV40BE

Brown

NJ1PV40MA

Black

NJ1PV40NE

White

NJ1PV50BL

Grey

NJ1PV50GR

Beige

NJ1PV50BE

Brown

NJ1PV50MA

Black

NJ1PV50NE

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

86

www.emac.es

COLOCACIÓN ® NOVOJUNTA 3 PVC • Fractioning and expansion joint manufactured in co-

extruded PVC, formed of one rigid PVC part that efficiently protects the paving borders, and another flexible PVC part that enables surface tensions to be absorbed.

• Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations.

• It is suitable for supporting all load types.

• Available in 5 colours: white, grey, beige, brown and black.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• If the floor will be polished, we recommend installing it slightly below the pavement level.

Novojunta® 3 PVC

General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft).

• For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).

HEIGHT PROFILE (h)

6 mm (0.23”)

8 mm (0.31”)

10 mm (0.39”)

12.5 mm (0.49”)

15 mm (0.59”)

www.emac.es

VISIBLE WIDTH (a)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

8 mm (0.31”)

EXPANSION Horizontal

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)

PACKAGING

50 units

50 units

50 units

50 units

50 units

COLOUR

REFERENCE

White

NJ3PV06BL

Grey

NJ3PV06GR

Beige

NJ3PV06BE

Brown

NJ3PV06MA

Black

NJ3PV06NE

White

NJ3PV08BL

Grey

NJ3PV08GR

Beige

NJ3PV08BE

Brown

NJ3PV08MA

Black

NJ3PV08NE

White

NJ3PV10BL

Grey

NJ3PV10GR

Beige

NJ3PV10BE

Brown

NJ3PV10MA

Black

NJ3PV10NE

White

NJ3PV12BL

Grey

NJ3PV12GR

Beige

NJ3PV12BE

Brown

NJ3PV12MA

Black

NJ3PV12NE

White

NJ3PV15BL

Grey

NJ3PV15GR

Beige

NJ3PV15BE

Brown

NJ3PV15MA

Black

NJ3PV15NE

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

87

88

15. PROFILES AND ACCESSORIES

u 89

NOVOCANTO® STAINLESS STEEL • • A rounded, high brightness profile of stainless steel AISI-304, employed as a corner piece to protect and decorate the corners of walls clad in ceramic tiles.

• It is installed easily in the angle formed by the cladding.

• It can further be employed as a finish on skirting boards for other types of cladding such as parquet, carpet, natural stone, etc.

• Available in heights of 10 and 12 mm (0.39” and 0.47”). For other heights and finishes, ask us.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

Novocanto® stainless steel

PROFILE HEIGHT (h) 10 mm (0.39”) 12 mm (0.47”)

PACKAGING

FINISH

30 units

High brightness

REFERENCE NCAAI10NA NCAAI12NA25

NOVOCANTO® ALUMINIUM •

• Rounded aluminium profile, which is employed as a corner

piece to protect and decorate wall corners clad with ceramic tiles, providing the resistance and lightness of aluminium.

• It is installed easily in the angle formed by the cladding.

• It can further be employed as a finish on skirting boards for other types of cladding such as parquet, carpet, natural stone, etc.

• Available in a natural finish, matt silver anodised, mirror bright anodised and white lacquer. For other colours, ask us.

• Available in heights of 10 and 12 mm (0.39” and 0.47”).

For other heights and finishes, ask us.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

PROFILE HEIGHT (h)

PACKAGING

10 mm (0.39”) 50 units 12 mm (0.47”)

FINISH

REFERENCE

Natural

NCAAL09NA25

Anodised matt silver

NCAAL09PL25

Anodised mirror bright

NCAAL09PB25

White lacquer

NCAAL10BL25

Natural

NCAAL12NA25

Anodised matt silver

NCAAL12PL25

Anodised mirror bright

NCAAL12PB25

White lacquer

NCAAL12BL25

Novocanto aluminium

Angle piece

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

90

www.emac.es

COLOCACIÓN ® NOVOCANTO PVC • A rounded PVC profile, employed as a corner piece to protect and decorate the corners of walls clad in ceramic tiles.

• It is installed easily in the angle formed by the cladding.

• It can further be employed as a finish on skirting boards for other types of cladding such as parquet, carpet, natural stone, etc.

• Available in white and grey and in heights of 10 and 12 mm (0.39” and 0.47”). For other colours and heights, ask us.

Novocanto® PVC

PROFILE HEIGHT (h)

PACKAGING

10 mm (0.39”)

100 units

12 mm (0.47”)

100 units

COLOUR

REFERENCE

White

NCAPV10BL25

Grey

NCAPV10GR25

White

NCAPV12BL25

Grey

NCAPV12GR25

Angle piece

COLOCACIÓN NOVOYESO • PVC profile for plastered walls.

• Installing before plastering it helps to achieve perfectly aligned corners, providing greater resistance to knocks and and scrapes.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novoyeso

www.emac.es

ARM DIMENSION (a)

PACKAGING

COLOUR

REFERENCE

10 mm (0.39”)

100 units

White

NYEPV25BL

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

91

MONOCAPA • • PVC profile for single-layer cladding. It leaves a perfect, permanent trace in the finishing of singlelayer façades.

• It creates the effect of joints and divisions in the single layer.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Monocapa

PROFILE HEIGHT (h)

WIDTH (a)

PACKAGING

COLOUR

REFERENCE

6 mm (0.23”)

20 mm (0.79”)

100 units

White

MONPV20GR

NOVOPARED-NOVOSUELO •

PROFILE HEIGHT (h)

PACKAGING

FINISH

REFERENCE

4.5 mm (0.18”)

NSUAL04NA25

6 mm (0.23”)

NSUAL06NA25

8 mm (0.31”)

NSUAL08NA25

10 mm (0.39”)

NSUAL10NA25

12.5 mm (0.49”)

NSUAL12NA25

15 mm (0.59”) 17.5 mm (0.69”)

50 units

Natural

NSUAL15NA25 NSUAL17NA25

20 mm (0.79”)

NSUAL20NA25

22.5 mm (0.88”)

NSUAL22NA25

25 mm (0.98”)

NSUAL25NA25

27.5 mm (1.08”)

NSUAL27NA25*

30 mm (1.18”)

NSUAL30NA25

• Right-angle profile in natural aluminium, with multiple uses.

• It can be used as a beautifier of joints between different materials, to separate paving, or as a corner protector.

• It can be installed with claddings of between 3 and 30 mm thickness, in a wide range of measurements.

• For other heights and finishes, ask us.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novopared-Novosuelo

* This model is supplied in lengths of 3 m (118”).

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

92

www.emac.es

COLOCACIÓN NOVOLISTEL® BASIC STAINLESS STEEL • Decorative profile of high brightness stainless steel AISI-304, of a square cross-section.

• It has multiple uses. It can be used as decorative trim, a dividing joint, a transition profile between different pavings, a corner piece, a step edge, handrail finishing, etc.

• Available in heights of 10 and 12 mm (0.39” and 0.47”).

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novolistel® Basic Stainless steel

v

PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

10 mm (0.39”)

8 mm (0.31”)

12 mm (0.47”)

8 mm (0.31”)

PACKAGING

FINISH

25 units

High brightness

REFERENCE NLBAI10NA25 NLBAI12NA25

COLOCACIÓN NOVOLISTEL® 3 ALUMINIUM • Decorative aluminium profile, square cross-section.

• It has multiple uses. It can be used as decorative trim, a dividing joint, a transition profile between different pavings, a corner piece, a step edge, handrail finishing, etc.

• Available in natural finish, matt silver anodised and mirror bright anodised.

• Available in heights of 10 and 12 mm (0.39” and 0.47”). For other heights, ask us.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novolistel® 3 aluminium

PROFILE HEIGHT (h) 10 mm (0.39”)

VISIBLE WIDTH (a)

PACKAGING

10 mm (0.39”) 30 units

12 mm (0.47”)

10 mm (0.39”)

FINISH

REFERENCE

Natural

NL3AL10NA

Anodised matt silver

NL3AL10PL

Anodised mirror bright

NL3AL10PB*

Natural

NL3AL12NA

Anodised matt silver

NL3AL12PL

Anodised mirror bright

NL3AL12PB*

* Supplied with protective film on the visible face.

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

93

NOVOESCUADRA ALUMINIUM • • Profile designed to protect or decorate the corners of any type of cladding.

• It is perfect for rehabilitation or reform works because it does not require alterations to be installed. It is also ideal for the protection of deteriorated or poorly finished edges on old installations.

• Available in natural finish and white lacquer.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novoescuadra aluminium

ARM DIMENSION (a)

PACKAGING

20 mm (0.79”)

50 units

FINISH

REFERENCE

Natural

NECAL20NA25

White lacquer

NECAL20BL25

• NOVOESCUADRA PLUS

• Square angle profile with a wide visible face manufactured in stainless steel AISI-304, designed to protect external and internal angles (corners).

• Especially recommended for the food industry.

• Due to its design, it provides a finish of great beauty and resistance, both interior and exterior.

• It has two attachment arms that ensure a perfect grip.

• Available in high-bright and brushed stainless steel.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

Novoescuadra Plus Exterior

MODEL

PROFILE HEIGHT (h)

WIDTH (a)

PACKAGING

FINISH

REFERENCE

External angle (corner)

12 mm (0.47”)

37 mm (1.46”)

10 units

High brightness

NECPAI37NA25

Brushed

NECPAI37CE25

Internal angle (corner)

10 mm (0.39”)

37.5 mm (1.48”)

10 units

Brushed

NECPAI25ICE

Interior

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

94

www.emac.es

COLOCACIÓN NOVOSEPARA 1

• Profile of a slim visible face manufactured in brass or aluminium, designed to cover joints and separate paving.

• Ideal as a dividing joint on terrazzo, marble or granite paving.

• Installation is recommended ”in situ” while laying the paving.

• It allows later polishing.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novosepara 1 FINISH Aluminium Brass

HEIGHT PROFILE (h)

VISIBLE WIDTH (a)

PACKAGING

REFERENCE

30 mm (1.18”)

4 mm (0.16”)

10 units

NSEAL30NA25

28.5 mm (1.12”)

5 mm (0.2”)

10 units

NSELT30NA25

25 mm (0.98”)

5 mm (0.2”)

25 units

NSELT25NA25

NOVOSEPARA 6 ALUMINIUM • Decorative profile manufactured in aluminium, designed to be installed in paving separation joints.

• Its geometry enables installation in extremely thick pavings.

• Available in natural and matt silver anodised aluminium.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novosepara 6 Aluminium

www.emac.es

PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

PACKAGING

23 mm (0.90”)

12.5 mm (0.49”)

50 units

FINISH

REFERENCE

Natural

NJDFAL30TA

Anodised matt silver

NJDFAL30TAPL

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

95

NOVOSEPARA 9 • • Decorative profile with a broad visible face, manufactured in aluminium or stainless steel AISI-304.

• It is designed to be installed in paving joins of all types and its main function is to beautify these joints.

• It can be installed before or after laying the paving.

• Available in intense-bright stainless steel, and in matt silver anodised aluminium.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• The stainless steel model is supplied with protective film on the visible face.

Novosepara 9 Aluminium MATERIAL Stainless steel

PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

7 mm (0.18”)

35 mm (1.38”)

Aluminium

PACKAGING

FINISH

REFERENCE

20 units

High brightness

NS9AI07NA

50 units

Anodised matt silver

Stainless steel NS9AL35PL

NOVOPLETINA ALUMINIum • • Anti-slip matt silver anodised aluminium shim, to be installed on steps, ramps or traffic zones where non-slip properties are required.

• Allows the passage of intense traffic.

• It also signposts potential hazards or acts as a guide for the blind or people with reduced visibility.

• Supplied with countersunk holes to be installed using screws.

• Profiles supplied in standard lengths of 2.7 m (106”).

Novopletina aluminium PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

PACKAGING

REFERENCE

3 mm (0.12”)

35 mm (1.38”)

10 units.

NPLAL35PLAG

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

96

www.emac.es

COLOCACIÓN NOVOESCOCIA® 4 ALUMINIum • Half-tube aluminium profile, which is attached to already installed tiling to facilitate cleaning of the skirting boards and tiled angles.

• It is attached easily using a silicone-type adhesive which is also waterproof.

• Helps to comply with standard CTE-DB-HS Salubridad (Public Health), which demands in Point 2.1.3, in reference to the design of the room reserved as a container warehouse in buildings and reserve space, that ”the meeting zone between walls and the floor must be rounded”. Additionally, the regulation ordinances on hygiene and health care conditions indicate that the construction elements of these installations must be ”easy to clean and disinfect”.

• Complementary pieces are available to achieve a perfect finish: interior corner, exterior corner, interior vertical finishing covers.

• Available in natural aluminium finish and white lacquer.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

• Supplied with protective film on the visible face.

Novoescocia® 4 aluminium

Complementary pieces:

external angle

PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

PACKAGING

27 mm (1.06”)

38 mm (1.5”)

30 units

internal angle

FINISH

REFERENCE

Natural

NE4AL50NA25

White lacquer

NE4AL40BL

cover

vertical internal angle

COLOCACIÓN ® NOVOESCOCIA 4 PVC • Half-tube PVC profile, which is attached to already installed tiling to facilitate cleaning of the skirting boards and tiled angles.

• It is attached easily using a silicone-type adhesive which is also waterproof.

• Helps to comply with standard CTE-DB-HS Salubridad (Public Health), which demands in Point 2.1.3, in reference to the design of the room reserved as a container warehouse in buildings and reserve space, that ”the meeting zone between walls and the floor must be rounded”. Additionally, the regulation ordinances on hygiene and health care conditions indicate that the construction elements of these installations must be ”easy to clean and disinfect”.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novoescocia® 4 PVC

www.emac.es

PROFILE HEIGHT (h)

VISIBLE WIDTH (a)

PACKAGING

FINISH

REFERENCE

25 mm (0.98”)

36.5 mm (1.44”)

30 units

White

NE4PV4OBL

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

97

98

16. SKIRTING

u 99

NOVORODAPIE® REHABIT • • Skirting of a modern design, manufactured in matt silver anodised aluminium, especially designed for building rehabilitation or renovation.

• It can be installed in two different ways: over pre-existing skirting board, saving time and installation costs, or onto the wall itself using the profiles for placement (2 meters length).

• Available in 2 heights: 80 and 120 mm (3.15” and 4.72”).

• Profiles supplied in standard lengths of 2 m (78.7”).

• Supplied with protective film on the visible face.

• For a perfect finish or installation, finishing covers for left and right and interior and exterior corners are available.

Novorodapie® Rehabit HEIGHT (a)

WIDTH (h)

80 mm (3.15”)

12 mm (0.47”)

120 mm (4.72”)

20 mm (0.79”)

PACKAGING

FINISH

10 units

Anodised matt silver

REFERENCE NRHAL80PL NRHAL120PL

Complementary pieces:

profile for placement

external angle

internal angle

covers

NOVORODAPIE® L • • Skirting manufactured matt silver anodised aluminium, easily installed thanks to its auto-adhesive strips.

• Original, lasting finish.

• Its lower lip allows it to mask the perimeter joint, allowing pavement expansion.

• Available in 3 heights: 60, 80 and 100 mm (2.36”, 3.15” and 3.94”).

• Profiles supplied in standard lengths of 3 m (118”).

Novorodapie® L

HEIGHT (a)

WIDTH (h)

60 mm (2.36”)

15 mm (0.59”)

80 mm (3.15”)

15 mm (0.59”)

100 mm (3.94”)

15 mm (0.59”)

PACKAGING

FINISH

REFERENCE NRLAL60PL3AD

10 units

Anodised matt silver

NRLAL80PL3AD NRLAL100PL3A

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

100

www.emac.es

COLOCACIÓN ® NOVORODAPIE FLEX • Skirting manufactured in flexible PVC. • Attachment using contact cement (follow instructions in the technical file).

• Available in 3 colours: white, beige and grey.

• Available in 2 heights: 60 and 80 mm (2.36” and 3.15”).

• Supplied in indivisible 25-m rolls.

Novorodapie® Flex

HEIGHT (a)

WIDTH (h)

PACKAGING

COLOURS White

NRFPV60BL

60 mm (2.36”)

14 mm (0.55”)

25-m roll.

Beige

NRFPV60BE

Grey

NRFPV60GR

80 mm (3.15”)

14 mm (0.55”)

25-m roll.

REFERENCE

White

NRFPV80BL

Beige

NRFPV80BE

Grey

NRFPV80GR

COLOCACIÓN NOVORODAPIE® SEMIFLEX • Skirting manufactured in semi-rigid, flexible PVC. • It adapts to the irregularities of paving. Thanks to its flexibility, it can also be installed in a curve.

• It incorporates beading scotia along its lower edge to aid

cleaning, which makes it ideal for buildings with high demands in hygiene such as hospitals, schools, shopping centres, etc.

• Attachment using contact cement (follow instructions in the technical file).

• Available in white.

• Profiles supplied in standard lengths of 2.5 m (98.4”).

Novorodapie® Semiflex

www.emac.es

HEIGHT (a)

WIDTH (h)

PACKAGING

COLOUR

REFERENCE

100 mm (3.94”)

15 mm (0.59”)

25 units.

White

NRSFPV100BL

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

101

102

17. STEP FINISHES

u 103

NOVOPELDAÑO® 5 • • Matt silver anodised aluminium profile, designed for the edging on steps.

• It has a grooved, anti-slip surface.

• It is attached easily to any type of paving and is ideal for the finishing of deteriorated tile steps as it covers any imperfections.

• Inalterable on the outside.

• Profiles supplied in standard lengths of 1 m or 2.5 m (39.4” or 98.4”).

• When ordered, it can be supplied with adhesive or with countersunk holes for screw attachment.

Novopeldaño® 5

WIDTH (a)

HEIGHT (h)

PACKAGING

42 mm (1.65”)

22 mm (0.87”)

20 units

PROFILE LENGTH

REFERENCE

100 cm (39.4”)

NP5AL42PL1

250 cm (98.4”)

NP5AL42PL

NOVOPELDAÑO® SAFETY • • An aluminium profile finished in matt silver that offers maximum

slip resistance thanks to its ridged surface and, above all, to its non-slip, 3-cm wide band.

• It is attached easily to any type of paving and is ideal for the finishing of deteriorated tile steps as it covers any imperfections.

• This is the ideal solution on steps in public places with dense traffic, both inside and outside.

• The anti-slip strip, of aluminium oxide, has a certified anti-slip rating of R13 according to standard DIN51130.

• The contrast between the profile and the strip furthermore guarantee its suitability within the guidelines offered in accessibility guides.

• Profiles supplied in standard lengths of 1 m or 2.5 m (39.4” or 98.4”).

• Supplied with protective film on the visible face.

WIDTH (a)

STRIP WIDTH (AD)

HEIGHT (h)

65 mm (2.56”)

30 mm (1.18”)

40 mm (1.57”)

PACKAGING

10 units

PROFILE LENGTH

REFERENCE

100 cm (39.4”)

NPSFAL65PL1

250 cm (98.4”)

NPSFAL65PL25

Novopeldaño® Safety

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

104

www.emac.es

® NOVOPELDAÑOCOLOCACIÓN LUMINA • Aluminium profiles with a ridged, non-slip surface plus a high-quality photoluminescent band which glows in the dark.

• They with the strictest standards in the area of emergency signalling. In fact, the photoluminescent strip (Class B) amply surpasses the demands in terms of luminescence set by standard UNE 23035-4.

• It is attached easily to any type of paving and is ideal for the finishing of deteriorated tile steps as it covers any imperfections.

• This is the ideal solution on steps in public places with dense traffic, both inside and outside. It has high resistance to wear.

• Available in 2 sizes of profile and photoluminescent band.

• The large model, with a photoluminescent strip 3 cm (1.18”) wide, can be attached to indicate the tread or riser depending on whether the evacuation direction is up or down.

• Profiles supplied in standard lengths of 1 m or 2.5 m (39.4” or 98.4”).

• Supplied with protective film on the visible face.

Novorodapie® Lúmina Fitting on risers

Lúmina 48 mm

Lúmina 65 mm

WIDTH (a)

STRIP WIDTH (F)

HEIGHT (h)

PACKAGING

48 mm (1.89”)

5 mm (0.2”)

25 mm (0.98”)

15 units

65 mm (2.56”)

30 mm (1.18”)

www.emac.es

40 mm (1.57”)

10 units

PROFILE LENGTH

REFERENCE

100 cm (39.4”)

NPLUAL48PL1

250 cm (98.4”)

NPLUAL48PL25

100 cm (39.4”)

NPLUAL65PL1

250 cm (98.4”)

NPLUAL65PL25

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

105

106

18. ENTRANCE MATS

u 107

warranty 5 years

ENTRANCE MATS

• Emac® entrance mats are an effective barrier against allowing the entry of dust, dampness and dirt, providing the maximum protection and durability to paving.

• They have been especially designed to avoid the entry of earth and to limit its propagation on the ground of any type of public building: airports, hospitals, hotels, offices, shopping centres, shops, leisure centres, etc.

• They are guaranteed for traffic of over 50,000 people per day.

• They are made to measure at the desired size and even in customised shapes.

• They consist of anodised aluminium profiles, connected together with elements of insulating synthetic, anti-slip material, on top of which the inserts for the traffic zone are placed. These can be siccant or abrasive.

• They allow commercial traffic and conform to standards on accessibility for people with reduced mobility.

5 profile heights: • The greater the height, the greater the capacity to accumulate dirt.

• The total height of the carpet is the sum of the profile height + 4 mm (0.16”) height of the covering.

5 types of covering: EXTERIOR:

INTERIOR:

• Brush: available in grey and black.

• Rubber: black.

• Soft Carpet: woven of 100% polyamide strands with great absorbent power (dampness retention of 3.5 l/m2). Fire classification at Cfl-s2. Available in 5 plain colours: anthracite, grey, red, blue and brown.

• Rep Carpet: woven of polypropylene fibre, it has excellent scraping properties. Fire classification at Cfl-s1. Available in 4 colours: anthracite, grey, red and tobacco.

• Abrasive-siccant carpet: drying and scraping qualities, highly elegant. Available in 3 colours: anthracite, grey and brown.

u Rubber

Brush

u

u

Soft Carpet

anthracite

grey

blue

red

anthracite

grey

red

tobacco

brown

anthracite

grey

brown

u Red Carpet black

black

u grey

Abrasive-siccant carpet

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793•info@emac-america.com

108

www.emac.es

Types of assembly: Depending on the join type of the structure, we distinguish between: • Closed structure: profiles joined at the base by strips of synthetic rubber, so that dirt is accumulated between the profiles to be cleaned with a vacuum cleaner. In the case of the 7.5 mm (0.29”) model, the mat is formed by aluminium profiles stuck to a continuous PVC sheet.

• Open (cable) structure: profiles joined by steel cable, so that dirt accumulates in the dirt trough below. To clean, the mat is rolled up to access the trough. This type of structure is not available in the model 7.5 mm (0.29”) high.

CLOSED STRUCTURE

OPEN (CABLE) STRUCTURE

Types of installation: INSTALLATION IN A TROUGH

INSTALLATION ON THE SURFACE

• Installation in a trough, with or without a border frame.

• Installation on the surface, on paving installed using a ramp frame (only 7.5 mm / 0.29” and 13 mm / 0.51” models).

REVERSIBLE TROUGH FRAMES

COVERING FINISH

PROFILE 7.5 mm (0.29”) Closed

ADHESIVE RAMP FRAMES

PROFILE 10 mm (0.39”) Closed

Open

PROFILE 13 mm (0.51”) Closed

Open

PROFILE 17 mm (0.67”) Closed

Open

PROFILE 22 mm (0.87”) Closed

Open

Soft Carpet

NFMS7C*

NFMS10C*

NFMS10A*

NFMS13C*

NFMS13A*

NFMS17C*

NFMS17A*

NFMS22C*

NFMS22A*

Rep Carpet

NFMR7C*

NFMR10C*

NFMR10A*

NFMR13C*

NFMR13A*

NFMR17C*

NFMR17A*

NFMR22C*

NFMR22A*

Abrasive-Siccant Carpet

NFMA7C*

NFMA10C*

NFMA10A*

NFMA13C*

NFMA13A*

NFMA17C*

NFMA17A*

NFMA22C*

NFMA22A*

Brush

NFCE7C*

NFCE10C*

NFCE10A*

NFCE13C*

NFCE13A*

NFCE17C*

NFCE17A*

NFCE22C*

NFCE22A*

Rubber

NFCA7C*

NFCA10C*

NFCA10A*

NFCA13C*

NFCA13A*

NFCA17C*

NFCA17A*

NFCA22C*

NFCA22A*

*Indicate colour of carpet or brush.

Joint plate for mats: Galvanised steel plate to facilitate the joining of different matting modules.

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

109

HOW TO REQUEST AN EMAC® ENTRANCE MAT: OPTION

SPECIFYING TROUGH DIMENSIONS

A

• Give the interior measurements of the dirt trough (width A x depth B).

• State whether it should be supplied with or without a frame.

• Indicate the direction of traffic.

• If the trough is not perfectly square or rectangular, it is essential to indicate the diagonals. We will calculate the mm (inches) of expansion.

B

A

SPECIFYING MAT DIMENSIONS

OPTION

B

• Give the dimensions (width A x depth B). The mat will be manufactured to the exact dimensions.

• Indicate the direction of traffic.

B

The maximum length is 4 m (157.4”). For larger sizes, mats are made in several pieces. We recommend you do not request the join in the central portion as this is the area of greatest traffic. It is better to leave the joins at the sides.

Module 1

RECOMMENDED:

Module 2

A

Module 3

entry

NOT RECOMMENDED

Module 1

Module 2

Module 1

Module 2

Module 3

entry entry

Formula for estimating the price of mats with special shapes: B

B

a

a

B a

B

a

B a

B

B a

Calculation= A+B+10%

Calculation=A+20%

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793•info@emac-america.com

110

www.emac.es

19. OTHER EXCLUSIVE SOLUTIONS This catalogue includes all our expansion joints and profiles for works, but at Emac速 we have many more solutions for finishing and decorating all types of paving and ceramic cladding. Visit www.emac.es/en to view our range.

u 111

Here you have a small selection Novopeldaño® MaxiKenya

A step finish manufactured in our exclusive MAXI material, of vegetable fibres. Its grooved surface increases slip resistance (Rd) on any paving, helping you comply with the strictest regulations. It is ideal for installing in exteriors, even as swimming pool surrounds.

Maxi profiles

Our range of MAXI products, using vegetable fibres, includes profiles for protecting corners, separating pavements, decorative listels, skirting and expansion joints.

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

112

www.emac.es

of other Emac® products Novonivel® Forte

A transition profile to avoid level differences, with a broad, grooved, anti-slip surface and reinforced support base for greater load resistance.

Also available with a photoluminescent strip (Class B) to comply with emergency signalling.

Novovierteaguas GT

Flashing board of a wide exposed face, manufactured in lacquered aluminium, ideal for finishing the border of terraces, balconies and sills.

The exclusive design of its throating, grooved along its length, makes it much more effective for channelling water away from the wall, thereby stopping water from falling down the façade and causing leaks.

www.emac.es

EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com

113

R+D+i EmacŽ has its own R&D team that designs, develops and improves profiles and expansion joints for the sole purpose of satisfying our customers’ needs. The EmacŽ R&D department is made up of professionals with extensive experience and excellent technical skills who are constantly learning and fully committed to the project. The team, backed by significant investment and collaboration with groundbreaking technology institutes, is able to provide technically competitive products of high quality.

The importance of this department is growing exponentially and a new laboratory has therefore been built for it within the Emac Complementos extensive facilities. This is a research and development center designed to perform various tests, studies, inspections, analyses, technological monitoring and even prototypes in our own Rapid Prototyping machine.

Our work in research, development and innovation can be seen in over 550 patents and more than 30 proprietary names and brands by which our most popular product ranges are known. All of this is done in order to protect our products and the value of our brand, which is deeply rooted in the market.

Rapid Prototyping machine.

114

Corporate Social Responsability Emac庐 social programmes ensure decent homes in India, more than 500 meals in Valencia, laughs and distraction for children in many hospitals, and permanent support for disabled people in our own community.

We work for a better world.

Fundaci贸n Vicente Ferrer

Casa de la Caridad, Cruz Roja, Improasistencia...

115

Emac® is a leading company in profiles and trims for wall and floor tiles, and expansion joint solutions for large projects. We offer more than 3.000 references in stock and excellent service, with solutions for floors, walls, facades and urban pavements. We are present in over 110 countries with subsidiaries in USA and Italy.

PROJECTS

In the last 20 years, hundreds of projects worldwide have chosen our profiles for resolving their structural joint challenges. We present a few of them here.

Dublin Airport (Ireland), United Nations Communications Centre in Valencia (Spain), Algarve Race Circuit (Portugal), King Juan Carlos I University in Madrid (Spain), Guatemala International Airport, Ikea shopping center in A Coruña (Spain), Public Parking “Serrano Street” in Madrid (Spain), Jumeirah Beach Residence in Dubai (United Arab Emirates), kitchens of University Hospital of Getafe (Spain), Ágora Building in City of Arts and Sciences of Valencia (Spain).

Emac Complementos, S.L. Avda. Madrid 6, Apdo. Postal 46 46930 Quart de Poblet, Valencia, Spain Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 Email: info@emac.es

Emac America, L.L.C. 1970 NW 129 Avenue, Unit # 103 Miami, FL 33182 Phone: # (305) 406 1593 - Fax: (305) 406 1793 Email: info@emac-america.com

Emac Italia S.R.L.

CATNJP11ENG

Via Emilia-Romagna 104 41049 Sassuolo (Mo), Italy Tel.: (+39) 0536994854 - Fax: (+39) 0536889025 Email: info@emac-italia.it