NEW Wheel Service 2012

New for

2012

Heavy-Duty Wheel Service

Contents Tire Changers MAX Heavy-Duty Tire Changer - WS-12670.............................................. 5 Automatic Heavy-Duty Tire Changer - WS-12660.................................... 7 Automatic Heavy-Duty Tire Changer - WS-12650.................................... 9 Heavy-Duty Tire Changer - WS-12645....................................................11 Heavy-Duty Tire Changer - WS-12630....................................................13 Wheel Balancers Heavy-Duty Wheel Balancer - WS-12890...............................................15 Heavy-Duty Wheel Balancer - WS-12880...............................................17

Heavy-Duty Tire Changer Model WS-12670

11’’- 60”

106” 69”

The WS-12670 MAX Heavy-Duty Tire Changer The ARI-HETRA Model WS-12670 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, tractor, agricultural and earth-moving equipment tires. This system is very user-friendly, versatile and safe with many time saving features built in. This tire changer has been designed and engineered with the dimensions and tool movement range to ensure maximum performance for all serviceable tire sizes.

Unique Full Automatic Tool Arm With the touch of a button on the wireless control unit, an operator has full control of the WS-12670 tool arm. This control enables drastic time savings and reduction of physical work load. The orbital tool arm moves around the tire in a time saving manner while a retractable hook increases tool changing speed.

Orbital Tool Arm

Retractable Hook Tool

12775 Randolph Ridge Lane, Manassas, VA 20109 (703) 359-6405 FAX

© 2012 ARI-HETRA

Heavy-Duty Tire Changer Model WS-12670

The WS-12670 MAX Heavy-Duty Tire Changer

Bead breaking force rated at over 7,934 lb. dismounts the most demanding tires Chassis moves in two directions 3-speed Orbital tool arm moves around the wheel, no need to move the carriage Retractable hook on tool arm Electro-brake immediately stops tire rotation Innovative clamp jaws allow for as low as 4” internal wheel diameter clamping Included Accessories

TECHNICAL DATA

WS-12670

Chuck rotation motor

3 hp (3 ph. - 440V - 60 Hz)

Hydraulic drive motor

Bead breaker power

2.5 - 3.25 hp (3 ph. - 440V - 60 Hz) 11” - 60” 106” (2,700 mm) 69” (1,750 mm) 3,465 lb 7,934 lb

Max wheel weight

5,070 lbs

Chuck rotation speed (rev/min)

1-6-12 rpm

Max. torque to chuck

5,800 Nm

Dimensions

111”(L) x 80”(W) x 53”(H)

Rim Ø Max. wheel Ø Max. allowed wheel width Shipping Weight

1 - bead breaking lever 1 - rim clamp 1 - set of extensions for increased rim size capacity 4 - clamp protections for alloy rims 1 - bead-locking clamp for alloy rims 1 - split ring lever

Optional Accessories Bead breaking device

12775 Randolph Ridge Lane, Manassas, VA 20109 (703) 359-6405 FAX

© 2012 ARI-HETRA

Heavy-Duty Tire Changer Model WS-12660

The WS-12660 Automatic Heavy-Duty Tire Changer The ARI-HETRA Model WS-12660 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, tractor, agricultural and earth-moving equipment tires. This system is very user-friendly, versatile and safe with many time saving features built in. This tire changer has been designed and engineered with the dimensions and tool movement range to ensure maximum performance for all serviceable tire sizes.

Fully Automatic Tool Arm With the touch of a button on the wireless control unit, an operator has full control of the WS-12660 tool arm. This control enables drastic time savings and reduction of physical work load.

Automatic Rotation

Automatic Lifting

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

Š 2012 ARI-HETRA

Automatic Movement

Heavy-Duty Tire Changer Model WS-12660

The WS-12660 Automatic Heavy-Duty Tire Changer

Bluetooth wireless control unit Ideal for many 19” and 22.5” truck wheels Innovative clamp jaws allow for as low as 4” internal wheel diameter clamping Fully automatic tool arm Works on tubeless, split-ring and tube tires Built-in tool holder Included Accessories

TECHNICAL DATA

WS-12660

Chuck rotation motor

3 hp (3 ph. - 440V - 60 Hz)

Hydraulic drive unit motor

Bead breaker power

2.5 - 3.25 hp (3 ph. - 440V - 60 Hz) 11” - 60” 106” (2,700 mm) 59” (1,500 mm) 3,000 lbs 37,000 N

Max wheel weight

5,070 lbs

Chuck rotation speed (rev/min)

1-6-12 rpm

Max. torque to chuck

4,275 FtLbs (5,800 Nm)

Dimensions

111”(L) x 63”(W) x 55”(H)

Rim Ø Max. wheel Ø Max. allowed wheel width Weight

1 - bead breaking lever 1 - rim clamp 1 - set of extensions for increased rim size capacity 4 - clamp protections for alloy rims 1 - bead-locking clamp for alloy rims 1 - split ring lever

Optional Accessories Bead breaking device

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Heavy-Duty Tire Changer Model WS-12650

11’’- 56”

96” 59”

The WS-12650 Automatic Heavy-Duty Tire Changer The ARI-HETRA Model WS-12650 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, tractor, agricultural and earth-moving equipment tires. This system is very user-friendly, versatile and safe with many time saving features. This tire changer has been designed and engineered with the dimensions and tool movement range to ensure maximum performance for all serviceable tire sizes.

Fully Automatic Tool Arm With the touch of a button on the wireless control unit, an operator has full control of the WS-12650 tool arm. This control enables drastic time savings and the reduction of physical work load.

Automatic Rotation

Automatic Lifting

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Automatic Movement

Heavy-Duty Tire Changer Model WS-12650

The WS-12650 Automatic Heavy-Duty Tire Changer

Bluetooth wireless control unit 3-speed Innovative clamp jaws allow for as low as 4” diameter internal wheel diameter clamping Automatic tool arm Works on tubeless, split-ring and tube tires Built-in tool holder Dual Platform Movement - Both the clamp platform and tool arm platform move separately to increase tire changing speed, increase bead breaking force and ease clamping alignment Included Accessories

TECHNICAL DATA

WS-12650

Chuck rotation motor

3 hp (3 ph. - 220V - 60 Hz)

Hydraulic drive unit motor

Bead breaker power

2.5 - 3.25 hp (3 ph. - 220V - 60 Hz) 11” - 56” 96” (2,450 mm ) 59” (1,500 mm) 2,500 lb 32,000 N

Max wheel weight

4,800 lbs

Chuck rotation speed (rev/min)

1-6-12 rpm

Max. torque to chuck

3,906 FtLbs (5,300 Nm)

Dimensions

107”(L) x 79”(W) x 53”(H)

Rim Ø Max. wheel Ø Max. allowed wheel width Shipping Weight

1 - bead breaking lever 1 - rim clamp 1 - set of extensions for increased rim size capacity 4 - clamp protections for alloy rims 1 - bead-locking clamp for alloy rims 1 - split ring lever

Optional Accessories Bead breaking device

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Heavy-Duty Tire Changer Model WS-12645

11’’- 42”

92.5” 43”

The WS-12645 Heavy-Duty Tire Changer The ARI-HETRA Model WS-12645 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, tractor, agricultural and earth-moving equipment tires. This system is very user-friendly, versatile and safe with many time saving features built in. This tire changer has been designed and engineered with the dimensions and tool movement range to ensure maximum performance for all serviceable tire sizes.

Versatile Clamping Chuck The ARI-HETRA Model WS-12645 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer is ideal for 19” and 22.5” wheels. The stepped jaws allow a 4” minimal internal clamping diameter without any additional accessories.

Additionally, a low clamp height of 13” is ideal for working on smaller wheels.

Minimum Height 13”

Minimum Clamping 4”

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Heavy-Duty Tire Changer Model WS-12645

The WS-12645 Heavy-Duty Tire Changer

Aerial electric and hydraulic controls rotate 120 degrees Three tool arm locking locations 2-speed Innovative clamp jaws allow for as low as 4” internal wheel diameter clamping Low clamping height and small clamping diameter to service small wheels Built-in tool holder Included Accessories

TECHNICAL DATA

WS-12645

Chuck rotation motor

1.75 - 2.5 hp (3 ph. - 220V - 60 Hz)

Hydraulic drive unit motor

Bead breaker power

3 hp (3 ph. - 220V - 60 Hz) 11” - 42” 92.5” (2,350 mm) 43” (1,100 mm) 1,850 lb 32,000 N

Max wheel weight

2,645 lbs

Chuck rotation speed (rev/min)

4-8 rpm

Rim Ø Max. wheel Ø Max. allowed wheel width Shipping Weight

Max. torque to chuck Dimensions

1 - bead breaking lever 1 - rim clamp 4 - clamp protections for alloy rims 1 - bead-locking clamp for alloy rims 1 - split ring lever

Optional Accessories Bead breaking device Tubeless roller

3,685 FtLbs (5,000 Nm) 89”(L) x 92”(W) x 54”(H)

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Heavy-Duty Tire Changer Model WS-12630

12’’- 26”

58” 33”

The WS-12630 Heavy-Duty Tire Changer The ARI-HETRA Model WS-12630 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, and super-single tires. This system is very user-friendly, versatile and safe with many time saving features built in. This tire changer has been designed and engineered with the dimensions and tool movement range to ensure maximum performance for all serviceable tire sizes.

The WS-12630 Features

Tube & Tubeless

120 Degree Rotation

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Heavy-Duty Tire Changer Model WS-12630

The WS-12630 Heavy-Duty Tire Changer

Aerial electric and hydraulic controls rotate 120 degrees Hydraulic controls allow you to fine tune speed through out the entire mounting/demounting process Low clamping height and small clamping diameter for servicing small wheels To avoid damaging smaller wheels the hydraulic pressure of the rim clamping chuck is adjustable Mounts/Demouts super-single wheels Manual tool arm Built-in tool holder Included Accessories

TECHNICAL DATA

WS-12630

Chuck rotation motor

3 hp (1 ph./3 ph. - 220V - 60 Hz)

Hydraulic drive unit motor

1 hp (1 ph./3 ph. - 220V - 60 Hz) 12” - 26” 58” (1,480 mm) 33” (850 mm) 2,200 lb

Rim Ø Max. wheel Ø Max. allowed wheel width Max. Wheel Weight Shipping Weight Dimensions

1 - bead breaking lever 1 - rim clamp 4 - clamp protections for alloy rims 1 - bead-locking clamp for alloy rims 1 - split ring lever

Optional Accessories Bead breaking device Tubeless roller

1,000 lb 102”(L) x 77”(W) x 83”(H)

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Heavy-Duty Wheel Balancer Model WS-12890

10’’- 30”

51” 27”

The WS-12890 Wheel Balancer These versatile machines are designed for fast, easy and accurate balancing of car and heavy-duty truck wheels. Microprocessor controlled with self-calibration and self-diagnostics. Specific balancing programs for static, dynamic and ALU wheels (light alloy). One spin with low rotation speed provides all the values.

Displays out of balance values and the related position on the wheel. Wheel diameter and width in inches or millimeters. Unbalance readout in grams or ounces.

Back-lit color graphic LCD display 120 x 90mm

Automatic Distance and Diameter Measurement

Auto Lock Automatic start when the cover is lowered and automatic stop in the outside unbalanced position.

An electro-pneumatic brake holds the wheel in position.

Automatic rotation to the inside unbalance position.

AUTO START

STOP (OUT)

AIR LOCK

AUTO START

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

STOP (IN)

AIR LOCK

Heavy-Duty Wheel Balancer Model WS-12890

39½”

58”

78”

WS-12890

41½”

25”

21½”

74”

The WS-12890 Wheel Balancer

Backlit color graphic LCD display with flat screen 120 x 90mm Safety hood Electro-pneumatic brake holds the wheel in position while placing weights Pneumatic wheel lift - 440 lbs. capacity Low speed rotation Car, Truck and Motorcycle wheels. Aluminum or steel Three highly sensitive balancing sensors.

TECHNICAL DATA

WS-12890

Rim diameter

10”-30”

Rim width

1.5”-22” 51”

Wheel diameter

Included Accessories

Power supply

27” 440 lbs 5g Truck/1g car 80 rpm truck/100 rpm car 110V 60 Hz / 1ph

Dimensions

74”(L) x 63”(W) x 78”(H)

Wheel width Max wheel weight Read-out accuracy Rotation speed

Set - Cones for light trucks (Ø from 118 to 174mm) Set - Cones for light trucks (Ø 202-221; 281mm) 1 - quick clamp hand wheel 1 - measuring calipers 1 - weight installation/removal tool 1 - Calibration weight

Optional Accessories

3 X 170, 186, 205, 222, 245 4 X 275, 285 5 X 225, 286, 335 20”-28° DAYTON (USA) 24”-28° DAYTON (USA) Set - Cones for off-road vehicles Ø 95-124mm Set - Cones for cars Ø 44-104 mm Quick clamp for cars

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

Heavy-Duty Wheel Balancer Model WS-12880

10’’- 30”

51” 27”

The WS-12880 Wheel Balancer These versatile machines are designed for fast, easy and accurate balancing of car and heavy-duty truck wheels. Microprocessor controlled with self-calibration and self-diagnostics. Specific balancing programs for static, dynamic and ALU wheels (light alloy). One spin with low rotation speed provides all necessary values.

Displays out of balance values and the related position on the wheel. Wheel diameter and width in inches or millimeters. Unbalance readout in grams or ounces.

Back-lit graphic LCD display 132 x 40mm

Pneumatic wheel lift

Auto Lock Automatic start when the cover is lowered and automatic stop in the outside unbalanced position.

An electro-pneumatic brake holds the wheel in position.

Automatic rotation to the inside unbalance position.

AUTO START

STOP (OUT)

AIR LOCK

AUTO START

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

STOP (IN)

AIR LOCK

Heavy-Duty Wheel Balancer Model WS-12880

40”

78”

WS-12880

39¾”

22½”

68½”

21½”

The WS-12880 Wheel Balancer

Back-lit graphic LCD display 132 x 40mm Safety hood Electro-pneumatic brake holds the wheel in position while placing weights Pneumatic wheel lift - 440 lbs. capacity Low speed rotation Car, Truck and Motorcycle wheels. Aluminum or steel Two highly sensitive balancing sensors.

TECHNICAL DATA

WS-12880

Rim diameter

10”-30”

Rim width

1.5”-22” 51”

Wheel diameter

Included Accessories

Power supply

27” 440 lbs 5g Truck/1g car 80 rpm truck/100 rpm car 110V 60 Hz / 1ph

Dimensions

68”(L) x 61”(W) x 78”(H)

Wheel width Max wheel weight Read-out accuracy Rotation speed

Set - Cones for light trucks (Ø from 118 to 174mm) Set - Cones for light trucks (Ø 202-221; 281mm) 1 - quick clamp hand wheel 1 - measuring calipers 1 - weight installation/removal tool 1 - Calibration weight

Optional Accessories

3 X 170, 186, 205, 222, 245 4 X 275, 285 5 X 225, 286, 335 20”-28° DAYTON (USA) 24”-28° DAYTON (USA) Set - Cones for off-road vehicles Ø 95-124mm Set - Cones for cars Ø 44-104 mm Quick clamp for cars

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA

12775 Randolph Ridge Lane, Manassas, VA 20109 PHONE (703) 359-6265 FAX (703) 359-6405

© 2012 ARI-HETRA