ARI-HETRA's 2015 Catalog

ARI-HETRA lifting systems

HEAVY-DUTY MAINTENANCE EQUIPMENT CATALOG

exhaust systems wheel service

2015

NORTH AMERICAN EDITION

OUTSIDE USA (703) 359-6265 FAX (703) 359-6405 12775 Randolph Ridge Lane, Manassas, VA 20109 © 2015 Automotive Resources, Inc. SL0215

www.ari-hetra.com

Wheel Service Equipment

ARI-HETRA on Contract

Tire Changers

ARI-HETRA has the equipment you need to service heavy-duty on and off-road tires.

ARI-HETRA is the Federal, State and Local Government’s premiere provider of heavy-duty maintenance equipment including lifting systems, exhaust extraction systems and wheel service equipment. ARI-HETRA has partnered with many entities to establish pre-competed contract pricing on our full line of equipment. These contract vehicles will help simplify and expedite the procurement process for all Federal, State and Local Government Purchasing Agencies.

On-Vehicle Brake Lathes GS-07F-291AA

U.S. General Services Administration Contract Number: GS-07F-291AA

All federal agencies and activities in the Executive, Legislative and Judicial branches, the Government of the District of Columbia, mixed ownership government corporations, government contractors and other activities and organizations duly authorized by statute or regulations are eligible.

Purchase directly from DoD EMALL! https://dod-emall.dla.mi The DoD EMALL contract is a web-based e-Commerce site, that allows DoD agencies and other Federal customers to access all ARI-HETRA equipment for purchase from the convenience of your computer 24/7.

California Multiple Award Schedule Contract Number: 4-13-56-0053A All California state and local government agencies, school districts, utilities and other entities authorized to expend public funds are eligible to participate in the CMAS program.

Western States Contracting Alliance Contract Number: 06405 All State Agencies, Political Subdivisions, Qualified Non-Profit Organizations, Materials Management Centers and Participating Institutions of Higher Education may utilize contract if their state has executed a Participating Addendum.

Houston-Galveston Area Council Contract Number: FL03-11

Floor Jacks Call an ARI-HETRA Regional Sales Manager to learn how our Wheel Service Equipment can keep you rolling.

Contract is available nationwide to all states, state agencies and local governments, including non-profit providing governmental services. Eligible for use upon execution of simple Interlocal Contract.

New York State Contract Contract Number: PC64741 Available for use by New York state agencies, political subdivisions and other organizations authorized by law to purchase from State contracts.

CALL 800-562-3250

Wheel Dollies

for more information on your specific contract

Tire Cages

Wheel Balancers

LIFTS INTRO ACCESSORIES

exhaust systems

lifting systems

Three IMPORTANT systems... one great COMPANY.

wheel service ARI-HETRA wheel service products are designed to service heavy vehicle tires quickly, safely and effortlessly. We offer tire changers, inflation systems and wheel balancers to meet your needs, no matter the size.

ARI reserves the right to change specifications without notice.

wheel service WHEEL SERVICE

exhaust systems Remove dangerous exhaust fumes at the source. ARI-HETRA offers systems customized for your shop. Our expert installers will help you design and install the right system. We stay with you from start to finish.

EXHAUST

lifting systems ARI-HETRA offers the safest, most reliable method of lifting your vehicle. We build lifting systems that can handle 48,000 lb. to 320,000 lb. that significantly reduce maintenance time, while benefiting from ARI-HETRA’s inherent safety features.

2 .......... Company History/Who We Are 2 .......... ARI-HETRA Safety 3 .......... ARI-HETRA Quality 4 .......... Sales, Support, Service & Training 6-9 ...... HDML Lifting Systems 10-11... Hybrid and Battery-Powered Lifting Systems 12 ........ WIDE-BODY Lifting Systems 13 ........ Adjustable Carriage 14-15... HDML-16 & HDML-18 Systems 16-20... HDXL Scissor Lifting Systems 21 ........ HDXL Scissor Lift Accessories 22 ........ Material Handling Lifting Systems 23 ........ Model FL-3-4: Forklift Lifting System 24 ........ Model FL-SAL-4 & FL-RC-103: Forklift Lifting System 25 ........ Model FL-OM-12: Forklift Lifting System 26 ........ Custom Lifting Solutions 27 ........ Model PBL-3: Paint Booth Lift 28-29... Heavy Duty Suspended Pit Jacks 31 ........ Remote Controls 32 ........ Reduction Sleeves 33-34 .. Support Stands 35 ........ Model FRLT-15 & FRLT-30: Front & Rear Light Truck Adapter 36 ........ Model TR-10-108: Chassis Cross Beam 37 ........ Model TR-10-108-KP: King Pin Adapter 38 ........ Heavy-Duty Alignment Stands 39 ........ Model AH-3000: Hi-Clutch Jack 40 ....... Multipurpose Jack 41 ....... Multipurpose Jack - Mobile 42-43.. Multipurpose Jack Accessories 44 ........ Model AH-2500: Transmission Jack 45 ........ Model TT-2000: Lifting Table 46 ........ Model AH-06187: Diesel Engine Stand 47 ........ Model AH-09756: Engine Hoist 48 ........ Model WOD-25: Self-Evacuating Waste Oil Drain 49 ........ Model WOD-65: Visible Waste Oil Drain 50 ........ Model INVR-10: Portable Inverter Cart 51 ........ Model KPP-143: Heavy-Duty King Pin Press 52 ........ HDEP Series: Electro-Hydraulic Press 53 ........ HDMP Series: Two-Speed Manual Press 54 ........ Oversized Press Series 55 ........ Press Accessories 57 ........ Do You Need An Exhaust Extraction System?

58-59 .. Our Product Range 60 ........ In-House Engineering & Tools For Architects 61 ........ Aluminum Slotted Duct - Cars And Light Trucks 62 ........ Aluminum Slotted Duct - Trucks And Buses 63 ........ Hose Reel Extraction Systems 64 ........ Model 999-907: Telescoping Exhaust Cane 65 ........ CNG Exhaust Application 66 ........ Welding Fume Extraction 67 ........ Custom Exhaust Extraction Solutions 69 .......

70 .......

71 .......

72 .......

73.......

74-75..

76 .......

77 .......

78 .......

79 .......

80 .......

81 .......

82 .......

83 .......

84 .......

85 .......

86-88..

89 .......

90 .......

91 .......

92 .......

Model WS-12660: Heavy-Duty Truck Tire Changer Model WS-12650: Heavy-Duty Truck Tire Changer Model WS-12645: Heavy-Duty Truck Tire Changer Model WS-12630: Heavy-Duty Truck Tire Changer Heavy-Duty Truck Tire Changer Optional Accesories Model WS-561-C: Heavy Duty Mobile Tire Changer Model WS-12890: Heavy-Duty Wheel Balancer Model WS-12880: Heavy-Duty Wheel Balancer Model WS-35026: Automatic Inflation Safety Cage Model WS-35026-70: Automatic Inflation Safety Cage Model WS-35026-FE: Automatic Inflation Safety Cage Model AH-20330 & AH-20440: High-Lift Wheel Dolly Model AH-80330: High-Lift Wheel Dolly Model AH-10330: High-Lift Wheel Dolly Model AH-500-CB: Counter-Balanced Wheel Dolly Model WS-0910T: Portable Floor Jack Multi-Step Air-Hydraulic Floor Jacks Model WS-08580: Portable Forklift Truck Jack Model WS-BL44 & WS-BL44-T: On-Vehicle Disc Brake Lathe Model WS-BL1500: Disc, Drum & Flywheel Lathe Model WS-BL2000: Disc, Drum & Flywheel Lathe

1

AUTOMOTIVE RESOURCES, INC. (ARI-HETRA) ARI-HETRA is a privately-owned company in operation for over 25 years. ARI-HETRA provides the world’s finest heavy-duty service equipment.

Our strengths are many, and the products we manufacture reflect our dedication to quality and safety.

Information:

Company Information

Some of the benefits we offer are: ARI MANASSAS, VIRGINIA

ARI METAL PRODUCTS CINCINNATI, OHIO

Safety-focused design.

Unsurpassed dedication to quality.

Durability for demanding environments.

Factory-direct service, engineering & installation.

Superior technology.

ARI-HETRA has factory-direct Regional Sales Managers throughout the U.S., Canada and overseas to assist you; odds are we are close to your location. ARI-HETRA’s Corporate Headquarters and final assembly factory are located in Manassas, Virginia, minutes outside of Washington, D.C. ARI Metal Products, our steel fabrication facility, is located in Cincinnati, Ohio.

ARI MANASSAS, VIRGINIA

ARI-HETRA SAFETY Safety is ARI-HETRA’s top priority. In an industry where the competition is continually trying to make things cheaper, our products are based on Safety, Quality and Reliability. Our research and development goals are and always have been to improve the safety of each and every product we offer. The methods we employ to meet these demands are many – our culture reflects our enduring commitment to produce such safe equipment. Our equipment has gone through intensely rigorous safety testing procedures and has been approved by The Automotive Lift Institute and NRTL certified MET Labs.

2

ARI METAL PRODUCTS CINCINNATI, OHIO

ARI-HETRA QUALITY Information:

Company Information

ARI-HETRA equipment is built and assembled in compliance with the highest standards. From engineering to metal fabrication to final assembly, we standardize on quality. We pride ourselves on providing the finest heavy-duty service equipment on the market.

WHO IS AN ARI-HETRA CUSTOMER? ARI-HETRA systems are used in over 40 different industries. Our customers include airlines and airport authorities, fire departments, military bases, transit, bus and coach companies, utility companies, school districts and heavy-duty automotive repair facilities, and that’s just a start. ARI-HETRA produces equipment used in almost every industry, and we have the knowledge and experience to do it right.

ARI-HETRA offers a full line of Wheel Service Equipment.

3

SALES, SUPPORT, TRAINING & SERVICE WE’RE IN YOUR AREA

Information:

Company Information

ARI-HETRA has sales and support professionals on staff, and in your local area. Our broad coverage ensures you will receive information on the latest products with the training and support that you need.

Company Headquarters Regional Coverage

On-site mobile Lifting System safety training.

ARI-HETRA has additional offices worldwide.

4

ARI-HETRA offers a full line of Exhaust Extraction Equipment.

SCISSOR LIFTS

CUSTOM DESIGN

4 POSTS

6 POSTS

MATERIAL HANDLING

WIDE TIRE LIFTS 5

ADVANCED ELECTRONICS MOBILE LIFT MODEL HDML-AE

ARI-HETRA has launched its most advanced Mobile Lift platform yet. In addition to its strength, versatility and high safety standards, the HDML-AE Mobile Lifting System offers so much more.

Highlights:

Safety Features:

1in. Thick Support Column Thick steel “H” beam ~ 5x rated strength capacity.

Electronic Overload Protection Shuts system down if load exceeds rated capacity.

Steel Wheels Steel (cast) wheels offer lasting durability.

Grease fittings on wheels extend life & serviceability.

Electrical Cables OSHA safety orange – oil & fuel impervious.

Quick-lock connections.

Rebuild-able.

Only requires 3 connection cables.

Lighting Kit High-output flood lights.

Allows you to see and work under vehicle.

Tight Turning Radius & Small Footprint Turning radius allows maneuverability in confined shops.

Can be stored with minimum space usage.

Self Diagnostics Operating status.

Error codes & fault information.

Compatibility Compatible with legacy ARI-HETRA systems.

Available on GSA Schedule & State Contracts Made in the USA Full set of accessories available

6

Information:

Lifting Systems

Audible Lowering Alarm Emits warning sound when lift is lowering.

Emergency Stop Button Red palm-operated switch completely stops entire system.

Safety Braking System Motor brake is engaged until power is applied.

Certified Heavy-Duty Vehicle Lift ANSI/ALI ALCTV – 2011 U.L. STD 201 CAN/CSA STD C 22.2 No. 68 Third-party tested by MET Labs.

HDML-8-AE shown with optional light kit.

Ball Screw Design Longer life than Acme thread.

No leaking seals like Hydraulics.

6-Race 90 Ball bearings sealed with grease fitting.

Low friction.

10-year life expectancy.

(5 year warranty)

Mechanical Safety Wedge-type safety device automatically locks between lifting carriage & H beam if needed.

Uses downward force and load weight to lock in place.

LED Control Panel Load cell displays weight at each post.

Lifted height displayed for absolute control in restricted space.

Displays in either standard or metric

WEIGHT HEIGHT

MULTI SINGLE FAULT

units.

Engineering Top-mounted gearbox, motor assembly and double-acting disc brake are housed in a watertight aluminum extrusion.

Lifting is achieved through a hardened, ball-bearing screw nut assembly suspended from the top of the column.

Security devices are built into the electrical system, which stops the lift from operating in case of an electrical failure or overload.

The main control box has an electronic phase sequence relay that automatically checks the rotation of the motors and adjusts accordingly. Additionally, if one phase is cutoff, the system will stop automatically.

Insulated inter-connecting cables are finished in OSHA safety colors.

The slim design allows optimum visibility in shop.

Technical Data MODEL SPECIFICATION

# OF COLUMNS

CAPACITY PER COLUMN

TOTAL CAPACITY

HDML 6-4-AE

12,000 LB.

48,000 LB.

208-230/460-480 VOLTS

30/15 AMPS

HDML 8-4-AE

15,000 LB.

60,000 LB.

208-230/460-480 VOLTS

30/15 AMPS

4

MOTOR CAPACITY

APPLICATION

WEIGHT PER COLUMN

MOTOR CAPACITY PER COLUMN

1,100 LB.

2.0 HP

2.0 HP

16,000 LB.

64,000 LB.

208-230/460-480 VOLTS

30/15 AMPS

HDML-10-4-AE

18,000 LB.

72,000 LB.

208-230/460-480 VOLTS

30/15 AMPS

1,175 LB.

2.0 HP

HDML 12-4-AE

25,000 LB.

100,000 LB..

208-230/460-480 VOLTS

50/20 AMPS

2,800 LB.

2.0 HP

HDML 6-6-AE

12,000 LB.

72,000 LB.

208-230/460-480 VOLTS

50/20 AMPS

HDML 8-6-AE

15,000 LB.

90,000 LB.

208-230/460-480 VOLTS

50/20 AMPS

1,100 LB.

2.0 HP

HDML 9-4-AE

HDML 9-6-AE

8 HP

POWER CONSUMPTION

2.0 HP

2.0 HP

16,000 LB.

96,000 LB.

208-230/460-480 VOLTS

50/20 AMPS

HDML-10-6-AE

18,000 LB.

108,000 LB.

208-230/460-480 VOLTS

50/20 AMPS

1,175 LB.

2.0 HP

HDML 12-6-AE

25,000 LB.

150,000 LB.

208-230/460-480 VOLTS

50/20 AMPS

2,800 LB.

2.0 HP

6

12 HP

2.0 HP

System can easily be configured for either 220 or 440 volts.

Dimensions for HDML-8

HDML

LIFTING SYSTEMS The Heavy Duty Mobile Lift (HDML) system is the heart of the ARI-HETRA product line.

No other system matches it for safety, flexibility, and ease-of-use. In configurations of 2, 4, 6 or 8 posts with lifting capacities ranging from 12,000 to 40,000 pounds per post; there is an HDML system for your needs.

8

HDML-8-6 Lifting a Fire Apparatus.

9

HYBRID MOBILE LIFTING SYSTEMS HBP & BP HDML SYSTEMS

Information:

Lifting Systems

ARI-HETRA’s new 24 Volt system utilizes dual industrial strength batteries and a Patented hybrid power system. You can now use 110 Volt power to run your lifts. This system has been engineered to operate with maximum efficiency while reducing environmental impacts by providing and utilizing sustainable energy, and further contributes to eligibility for certification under LEED (Leadership in Energy and Environmental Design) Green Building Rating System for existing buildings operations & maintenance.

Power Saving After 2 minutes of inactivity, the lifts power down automatically to conserve energy.

Advance Hybrid System The downward inertia of a lowered vehicle is used to generate power, which is then restored to the batteries.

LED Control Panel Load cell displays weight at each post.

Lifted height displayed for absolute control in confined spaces. Displays in either standard or metric units.

Electronic Overload Protection Shuts system down when load is over the rated capacity.

Self Diagnostics Operating status displays error codes and fault information.

Power from batteries

Power returned to batteries

UP

US Patent No. 8,474,793 B2

DOWN

10

 Call for a FREE demo

TECHNICAL SPECIFICATIONS Information:

Lifting Systems

CAPACITY PER COLUMN

TOTAL CAPACITY

HBP-HDML 6-4-AE

12,000 LB.

48,000 LB.

HBP-HDML 8-4-AE

15,000 LB.

60,000 LB.

16,000 LB.

64,000 LB.

HBP-HDML 10-4-AE

18,000 LB.

72,000 LB.

HBP-HDML 6-6-AE

12,000 LB.

72,000 LB.

HBP-HDML 8-6-AE

15,000 LB.

90,000 LB.

16,000 LB.

96,000 LB.

HBP-HDML 10-6-AE

18,000 LB.

108,000 LB.

BP-HDML 6-4-AE

12,000 LB.

48,000 LB.

15,000 LB.

60,000 LB.

16,000 LB.

64,000 LB.

BP-HDML 10-4-AE

18,000 LB.

72,000 LB.

BP-HDML 6-6-AE

12,000 LB.

72,000 LB.

15,000 LB.

90,000 LB.

16,000 LB.

96,000 LB.

18,000 LB.

108,000 LB.

MODEL

HBP-HDML 9-4-AE

HBP-HDML 9-6-AE

BP-HDML 8-4-AE BP-HDML 9-4-AE

BP-HDML 8-6-AE BP-HDML 9-6-AE BP-HDML 10-6-AE

Advanced readout display shows battery level, height, weight and diagnostic information.

Ask about our full library of Detailed Electronic Specifications.

# OF COLUMNS

4

6

4

6

MOTOR OUTPUT

POWER REQUIREMENTS

8 HP

110 VOLTS, 20 AMPS Charging 24 Volt DC

WEIGHT PER COLUMN

1,300 LB.

MOTOR OUTPUT PER COLUMN 2.0 HP

1,475 LB.

12 HP

110 VOLTS Charging, 30 AMPS 24 Volt DC

1,300 LB.

2.0 HP

1,475 LB.

8 HP

110 VOLTS Charging, 20 AMPS 24 Volt DC

1,300 LB.

2.0 HP

1,475 LB.

12 HP

110 VOLTS Charging, 30 AMPS 24 Volt DC

1,300 LB.

2.0 HP

1,475 LB.

Sizes vary between models. Model BP-HDML-8-AE is shown above.

11

WIDE-BODY LIFTING SYSTEM MODEL HDML-W

Information:

Lifting Systems

ARI-HETRA’s MODEL HDML-W is built on the same stout platform as our HDML Model except that it has a carriage width of 27 in. and can handle oversized tires. This wide-body carriage engages tires on the vehicle while it sits flat on the ground. This eliminates the time required to elevate the tires when engaging with a standard carriage.

Features Carriage width is 27 in.

Same Safety, Quality and Reliability as our Model HDML Lifting Systems Available in 12,000 lb., 15,000 lb., 16,000 lb., 18,000 lb.

ARI-HETRA offers a full line of 12

Wheel Service Equipment.

ADJUSTABLE CARRIAGE Information:

Lifting Systems

Choose a lifting system that can service all the vehicles in your fleet. Quickly change between lifting a heavy-duty vehicle to a light truck in moments. Save money by purchasing a single multi-purpose lift for your needs.

Technical Data ARI-HETRA adjustable lifting carriages are constructed in the USA and feature precision machined surfaces and stout locking pins. They are available in either 12 in. fork lengths for standard tire widths or 18 in. fork lengths for flotation tires. Forks adjust & lock for tire sizes from a 9 in. minimum to 27 in. maximum.

18.5”

17” MIN 32” MAX

13

160,000 LB. CAPACITY MOBILE LIFT MODELS HDML-18 & HDML-16

Information:

Lifting Systems

These are truly heavy-duty lifting systems that can safely lift up to 160,000 lb. vehicles. Two models rated at 30,000 lb. or 40,000 lb. capacity per column. The lift columns are mobile and the system comes with a powered pusher for maneuvering around the shop.

14

Information:

Lifting Systems

Technical Data MODEL SPECIFICATION HDML 16-4 HDML 18-4

# OF COLUMNS 4

CAPACITY PER COLUMN

TOTAL CAPACITY

30,000 LB.

120,000 LB..

40,000 LB.

160,000 LB..

MOTOR CAPACITY 8 HP

POWER CONSUMPTION

WEIGHT PER COLUMN

MOTOR CAPACITY PER COLUMN

208-230/460-480 VOLTS

40/30 AMPS

6,100 LB.

3.0 HP

208-230/460-480 VOLTS

40/30 AMPS

6,100 LB.

3.0 HP

System can easily be configured for either 220 or 440 volts.

Call for a FREE demo

15

HDXL SCISSOR LIFTS Information:

Lifting Systems

16

Call for a FREE demo

HDXL SCISSOR LIFTING SYSTEMS Information:

Lifting Systems

ARI-HETRA’s 900 Series Scissor Lifts offer a high quality, truly heavy-duty lifting system. Solid steel construction with bronze and graphite pivot points are only some of the characteristics that make the 900 series lifts superior. Changing a clutch, inspecting shocks or performing some other maintenance function is easier and quicker with ARI-HETRA scissor lifts. Best of all, these lifts require very little floor modifications. With many models available, ARI-HETRA has the best lift for you.

Available Models HDXL 900-910 HDXL 901-911 HDXL 902-912

HDXL 903-913 HDXL 906-916 HDXL 907-917

HDXL 908-918

Features Lifting and lowering of all four cylinders is regulated and synchronized by advanced electronics.

Sealed bronze and graphite pivot points (strong, durable, low maintenance).

Structural ribs under platforms.

Flush or surface mounting.

Platforms wide enough for dual-wheeled vehicles.

Automatic wheel chocks fall into place when vehicle is lifted.

Optional air supply.

Optional galvanized finish for wash bay applications.

Safety Features 24-Volt electrical circuits and components Maximum capacity controlled by an overload safety valve.

Mechanical safety latching mechanism.

Lockable control panel.

Two platforms, synchronized by our exclusive SMART HYDRAULICS control system, maintain a level lifting surface.

Ask about our full library of

Detailed Electronic Specifications.

17

HDXL-900

HDXL LIFTING SYSTEMS HDXL 900

344”

HDXL-910

236”

2”

106”

Lifting Systems

104” 30½”

Information:

43”

30½”

Specifications

75” 15”

Lifting Capacity:

HDXL 910

20,000 lb.

Capacity

20,000 lbs.

236”

900 - 10,700 lb. / 910 - 9,400 lb. Weight 9680 lbs.

Platform Length: 19 ft. 8 in.

HDXL-911 104” 60” HDXL Weight:

Power Requirements: 440/220V 3 Phase 60 Hz

30½”

43”

75”

30½”

HDXL-901 15”

Capacity Weight

HDXL 901

382”

20,000 lbs.

8,910 lbs.

276”

106”

104” 30½”

43”

Lifting Capacity: HDXL Weight:

75”

30½”

Specifications

15”

29,000 lb.

Capacity HDXL 29,000 911 lbs.

HDXL-902 11,000 lbs.

901 - 12,300 lb. / 911 - 11,000 lb.Weight

Platform Length :

23 ft.

104” 30½”

43”

61”

30½”

Power Requirements: 440/220V 3 Phase 60 Hz

276”

75”

15”

Capacity 29,000 lbs.

HDXL 11,000 902 lbs.

Weight HDXL-912

442” 336”

106”

104” 30½”

43”

15”

Specifications Lifting Capacity: HDXL Weight:

75”

30½”

50,000 lb.

HDXL 912

Capacity 50,000 lbs.

HDXL-903 14,960 lbs.

902 - 20,000 lb. / 912 - 18,700 lb. Weight

Platform Length:

28 ft.

Power Requirements: 440/220V 3 Phase 60 Hz

104” 30½”

43”

336”

60”

30½”

75”

15”

Capacity 51,000 lbs.

HDXL 903 Weight 14,960 lbs.

HDXL-913

490” 384”

106”

104” 30½”

43”

30½”

Specifications Lifting Capacity: HDXL Weight:

75,000 lb.

HDXL 913

Capacity

75,000 lbs.

17,380 lbs.

903 - 26,500 lb. / 913 - 25,200 lb. Weight

Platform Length:

32 ft.

Power Requirements: 440/220V 3 Phase 60 Hz

104” 30½”

43”

60”

30½” 15”

Capacity Weight

18

75” 15”

73,000 lbs.

17,380 lbs.

384”

75”

Flush mounted HDXL-913

HDXL LIFTING SYSTEMS HDXL-916

551”

659”

2”

106”

Information:

Lifting Systems

75”

104” 30½” 43” 30½”

HDXL 906 15”

HDXL-907

551”

Specifications

61”

75”

Lifting Capacity: HDXL Weight:

HDXL 916

104” 30½” 43” 30½”

Platform Length:

46 ft.

Power Requirements: 440/220V 3 Phase 60 Hz

15”

HDXL-917

57,000 lb.

906 - 23,300 lb. / 916 - 22,000 lb.

630”

738”

2”

106”

75”

HDXL 907

104” 30½” 43” 30½” 15”

HDXL-908

630”

Specifications

60”

75”

Lifting Capacity: HDXL Weight:

HDXL 917

104” 30½” 43” 30½”

Platform Length:

52 ft. 6 in.

Power Requirements: 440/220V 3 Phase 60 Hz

15”

HDXL-918

101,000 lb.

907 - 33,600 lb. / 917 - 32,300 lb.

650”

758”

2”

106”

75”

HDXL 908

104” 30½” 43” 30½” 15” 650”

60”

Specifications 75”

Lifting Capacity: HDXL Weight:

HDXL 918

104” 30½” 43” 30½”

132,000 lb.

908 - 45,300 lb. / 918 - 44,000 lb.

Platform Length:

54 ft. 2 in.

Power Requirements: 440/220V 3 Phase 60 Hz

15”

ARI-HETRA offers a full line of

Exhaust Extraction Equipment.

19

WASH BAY SCISSOR LIFTS Information:

Lifting Systems

ARI-HETRA’s 900 Series Scissor Lifts can be ordered with a galvanized coating for wash bay specific applications. This package also includes additional water-resistant electrical components and a protective spray hood for the control cabinet.

Protective control cabinet spray hood is galvanized for harsh environments.

20

 Call for a FREE demo

HDXL LIFT ACCESSORIES Information:

Lifting Systems

MODEL XLA-458A

AIR-HYDRAULIC LIFTING CROSSPIECE

ARI-HETRA’s XLA-458A Air-Hydraulic Lifting Crosspiece is equipped with sliding rollers and a set of hydraulic cylinders. The sliding crosspiece is air-hydraulic, complete with four caster wheels for trouble-free movement while on the ground.

Features Equipped with two independent air-hydraulic cylinders.

Each cylinder can lift half of the maximum load.

Safety valve keeps the lowering speed constant, independent of the load.

Four caster wheels for easy transport.

Four spring-loaded runners.

Optional 12 in. tall adapters available for HUMVEEs. Included Extenders

Optional Extenders 12in. XLA-MM305

MODEL XLA-923A Lighting Kit

Lighting system 24-Volt water-resistant LED light bars for hands-free lighting. Housed on underside of platform, enhancing safety and visibility.

MODEL XLA-922

Extension Kit for HDXL

The Model XLA-922 Extension Kit for our HDXL 900 Series Drive-On Lifts. This kit adds 3 ft. of length between the scissor lift running boards and the control cabinet. It also includes hydraulic, air and electrical lines and connectors.

ARI-HETRA offers a full line of

Wheel Service Equipment.

21

FORKLIFT LIFTING SYSTEM ARI-HETRA’s FL Lifting System uses a ramp and contact pad with two HDML lifting posts* to gain access to the underside of short wheelbase industrial vehicles. Preventive maintenance, lubrication, repair and parts replacement are made easier and safer with the vehicle raised.

ARI-HETRA’s systems lift three or four-wheeled forklifts. Our FL Lifting Systems offer tremendous time savings over floor jacking or overhead cranes. When the job is finished, the system is loaded onto a storage cart and wheeled out of the way.

Safety The FL System features all the safety benefits of our HDML posts (See page 6) as well as a non-skid rubber surface contact point and perforated traction ramps.

Available Model FL Systems FL-1 FL-1-W

FL-3-4 FL-3-4-W

FL-3-SP

* HDML lifting capacities may be reduced when using FL accessories.

22

Information:

Lifting Systems

MODEL FL-3-4 FORKLIFT ADAPTER Information:

Lifting Systems

ARI-HETRA’s Model FL-3-4 Forklift Adapter is a mobile lifting system that, when used with two HDML columns, provides easy undervehicle access for counterbalance lift trucks (four-wheel forklift).

Intended Use For use with four-wheel lift trucks with a wheelbase of 76 in. or less*. Maximum lifting capacity is limited to the lift truck’s wheel base. The forklift is driven onto platform ramps with the center of gravity over the center component (drive-over pads). Model HDML then lifts the center component (drive-over pads) and the forklift to provide “stand-up” under-vehicle access.

15 piece FL-3-4 Forklift Adapter package includes: 4 Drive-on Ramps

2 Center Components

4 Front Platform Ramps

2 Stabilizer Tubes

2 Rear Platform Ramps

1 FL Adapter Storage Cart

Options FL-3-SP Spacer blocks for FL-3 (set of 4).

FL-3-4 system in use.

*For forklifts with a wheelbase greater than 76 in., a standard four post tire engaging system is recommended.

RAMP

BASE SIZE

INCLINED RAMP LENGTH

LEVEL PLATFORM LENGTH

HEIGHT

WIDTH

LENGTH

WIDTH

48 in.

79 in.

7 in.

10 in.

41 in.

41 in.

Ask about our full library of

Detailed Electronic Specifications.

23

MODEL FL-SAL-4 FORKLIFT ADAPTER FOR DOUBLE END-DRIVE PALLET MOVERS

The ARI-HETRA Model FL-SAL-4 is a lifting adapter that, when used with two HDML columns, provides easy under-vehicle access for end-drive pallet movers. It is constructed of heavy gauge steel and provides a stout platform for a forklift to drive onto. Once on the ramp, the forks will fit through the platform ensuring the double movers align to their center of gravity providing a safe lifting application.

Information:

Lifting Systems

Intended Use For lifting of double end-drive pallet movers in order to perform maintenance on grease fittings, swivel casters and drive wheels.

Rugged Steel Construction 4,000 lb. Capacity For Forks up to 96 in.

Raises Forklifts 65 in. high Made in the USA

FL system in use in Forest City, Iowa.

MODEL FL-RC-10-3 FORKLIFT ADAPTER FOR TRIPLE & QUAD END-DRIVE PALLET MOVERS

The ARI-HETRA Model FL-RC-10-3 is a lifting adapter that, when used with two HDML columns, provides easy under-vehicle access for end-drive pallet movers. It is constructed of heavy gauge steel and provides a stout platform for a forklift to drive onto. Once on the ramp, the forks will fit through the platform ensuring the triple and quad pallet movers align to their center of gravity providing a safe lifting application.

Intended Use For lifting of triple and quad end-drive pallet movers in order to perform maintenance on grease fittings, swivel casters and drive wheels.

Rugged Steel Construction 10,000 lb. Capacity For Forks 115 in. to 144 in.

24

Raises Forklifts 63 in. high Made in the USA

ARI-HETRA offers a full line of Wheel Service Equipment.

FORKLIFT SYSTEM Information:

Lifting Systems

MODEL FL-OM-12 LIFTING PLATFORM The ARI-HETRA FL-OM-12 Lifting Platform is a mobile lifting system that, when used with two HDML columns, provides easy under-vehicle access for “Narrow Aisle” forklifts. It is constructed of heavy gauge steel and provides a stout platform for a forklift to drive up onto. Once on the ramp, the base arms (outrigger arms) will fit through the platform. Spacer plates are included to raise the forklift off the platform. A cart is included for out-of-the-way storage and easy movement.

Intended Use The FL-OM-12 Lifting Platform is a mobile lifting system that provides easy under-vehicle access for “Narrow Aisle” forklifts.

Features Rugged Steel Construction Spacer Blocks Storage Cart Raises Forklifts 68 in. high Made in the USA

Available Models FL-OM-12

Model HDML-8-2 System with Model FL-OM-12 Lifting Platform.

FL-OM-S

ADAPTER

ADAPTER LENGTH

OVERALL ADAPTER WIDTH

HEIGHT

WIDTH

45 in.

93 in.

14 in.

62 in.

SHIPPING WEIGHT (lb.)

OPENING

1,200

25

CUSTOM LIFTING SOLUTIONS HDML LIFTING SYSTEMS

Information:

Lifting Systems

ARI-HETRA customizes lifts with special dimensions and capacity for everything from buildings to railway cars. Contact us to customize a lifting solution for you.

Purpose: Lifting oil drilling rig.

Purpose: Lifting a shuttle car.

Purpose: Lifting modular buildings.

Purpose: Permanently installed for AGV.

26

ELEVATING WORK PLATFORM Information:

MODEL PBL-3

Lifting Systems

Construction Features Pneumatic mobile work platform made for use in paint or sandblast booths. Auxiliary plug on-board for pneumatic tools.

Safety device Voluntary driving controls with emergency shut-off button, lowering speed adjuster, overload valve, emergency lowering device controlled from ground, work platform protection and safety devices.

Standard Features

PBL-3

Lifting capacity

660 lb.

Lifting device

Pneumatic

Additional Control Device

Pneumatic

Air pressure required

87 psi

Work platform dimensions

118”x34”x43”h

Lifting height from ground

111”

Lifting time

49 sec.

Lowering time

35 sec.

Maximum working temperature

185°F

Weight

970 lb.

Maximum lifting height - 111 in.; Lifting capacity - 660 lb.

ARI-HETRA offers turn-key

Exhaust Extraction Equipment.

27

HEAVY-DUTY SUSPENDED PIT JACK HDSPJ

Information:

Lifting Systems

OPTIONS

Manual

Electro-Hydraulic

Twin Ram

Hydro-Pneumatic

8,800 lb. to 66,000 lb. Cap.

8,800 lb. to 44,000 lb. Cap.

2 x 18,000 lb. Cap

8,800 lb. to 66,000 lb. Cap.

24 in. stroke

43 in./47 in. stroke

16 in. stroke

31 in. stroke

28

HDSPJ SUSPENDED PIT JACKS Information:

Lifting Systems

6 in.

Rolls Easy: The standard needle roller bearings on the carriage rollers permit the lift to roll effortlessly in the pit.

c

u

1.5 in.

a

Durability: Both the lifting and pump piston are chrome plated, for protection against corrosion and wear.

Fully hydraulic lifting unit: Thanks to the corrosion prevention system, during every lifting and lowering movement, the cylinder is submerged in oil on either side of the sealing sleeve. This means that both the piston and the cylinder are constantly in an oil bath, effectively protecting the cylinder walls against corrosion.

b

Time-saving (I):: The hydro-pneumatic quick lift rapidly moves the piston rod to the lifting point.

r

Dimensions

Type V1: a= 32 in.-36 in.

Type V2: a= 34 in.-40 in.

Type V3: a= 40 in.-43 in.

b: 41 in.

c: 4 in.

r: 10 in.

u: 3.75 in.

Additional dimensions by request.

Specifications

Peg-diameter: 55 mm

Operating pressure: 3,190 PSI

Compressed air required: 160 PSI

Time-saving (II): The hydro-pneumatic forced return rapidly retracts the piston even when unloaded. The piston is in effect “pulled” back into its rest position.

Precision: The step-less fine-adjustment stroke permits the pit lift to be positioned accurately on the vehicle. Important for precise lifting and when installing assemblies.

Minimum effort: The pneumatic motor enables the load to be lifted at the push of a button – without any physical effort.

Ergonomics: To allow maximum freedom of movement in the pit, the operating controls are located on the front. Large controls permit easy operation even when wearing gloves.

Call for a FREE demo

29

TRANSMISSION JACKS

LIFTING TABLES

WASTE OIL DRAINS

PRESSES

SUPPORT STANDS

CLUTCH JACKS

REMOTE CONTROLS INVERTERS

ENGINE STANDS

WASTE OIL DRAINS

30

Information:

REMOTE CONTROLS

Lift Accessories TC-WR-04 Wireless Remote ARI-HETRA’s NEW Wireless Remote Control unit allows you to control your HDML system from anywhere in the shop. It has all the safety features of the post-mounted controls in a rugged wireless housing.

Simple plug-in with ARI-HETRA HDML systems No cables Saves time and energy Durable lightweight housing Long-range Available for all HDML systems.

TC-10-2 Remote Control The TC-10-2 Remote Control unit allows you to control your HDML system at a distance with the same safety features as the post-mounted controls.

Up / Down Pendant with emergency stop 30’ cable

ARI-HETRA offers a full line of

Exhaust Extraction Equipment.

31

REDUCTION SLEEVES Information:

Accessories

EP-2 allows you to use your existing HDML Lifting System for maintaining smaller, light-duty equipment.

Model EP Reductions Sleeves work with ARIHETRA’s HDML lifting systems.

MODEL EP-2

REDUCTION SLEEVES

For smaller tire diameter, down to minimum 13 in. rim size; used for lifting light trucks and passenger cars.

Used in pairs or individually.

Weight - 26 lb. per pair.

MODEL EP-2-9

REDUCTION SLEEVES

For specialty vehicles, down to minimum 9 in. rim size.

Used in pairs.

Weight - 65 lb. per pair.

EP-2

EP-2-HD

MODEL EP-2-HD

HEAVY-DUTY REDUCTION SLEEVES

For lifting heavy vehicles with tire sizes from 10 in. to 8.25 in. x 20 in. (down to a minimum 13 in. rim size).

Used in pairs or individually.

Weight - 25 lb. each.

Total capacity of 15,000 lb. (or limited to 12,000 lb. if a HDML-6 system is used).

Model HDML-8-4 System with EP-2-HD Heavy-Duty Reduction Sleeves.

ARI-HETRA offers turn-key 32

Exhaust Extraction Equipment.

Information:

SUPPORT STANDS

UP TO 18,000 LB. CAPACITY

Lift Accessories MODEL AB-6-07

Model AB-6-20 Tall Support Stands.

SHORT SUPPORT STANDS

18,000 lb. Capacity.

Lifting Range 20 in. to 30 in. at 2 in. Stepped Increments.

3/4 in. Diameter Steel Quick-Release Pin with Lanyard Assembly.

MODEL AB-6-12

MEDIUM SUPPORT STANDS

18,000 lb. Capacity.

Lifting Range 28 in. to 46 in. at 2 in. Stepped Increments.

3/4 in. Diameter Steel Quick-Release Pin with Lanyard Assembly.

MODEL AB-6-20

TALL SUPPORT STANDS

Model AB-6-12

Model AB-6-20

Model SP-75

18,000 lb. Capacity.

Lifting Range 48 in. to 74 in. at 2.75 in.

Stepped Increments.

3/4 in. Diameter Steel Quick-release Pin with Lanyard Assembly.

Equipped with Heavy-duty 6 in. Caster Wheels.

Gas-Spring Counterbalance for Safe Height Adjustment.

MODEL SP-75

FINE ADJUSTMENT SCREWS

Model AB-6-07

Machined-Thread Surface.

For AB-6-20 Tall Support Stands.

Fine-tune Height from 2 in. to 4 in.

Ask about our full library of

Detailed Electronic Specifications.

33

SUPPORT STANDS

30,000 LB. CAPACITY AND UP

Information:

Accessories

MODEL AB-12-07

SHORT SUPPORT STANDS

30,000 lb. Capacity.

Lifting Range: 24 in. to 36 in. at 2 in. Stepped Increments.

1.5 in. Diameter Steel Quick-release Pin with Lanyard Assembly.

MODEL AB-12-12

MEDIUM SUPPORT STANDS

30,000 lb. Capacity.

Lifting Range: 28 in. to 46 in. at 2 in. Stepped Increments.

1.5 in. Diameter Steel Quick-release Pin with Lanyard Assembly.

Model AB-24-04

MODEL AB-12-20

TALL SUPPORT STANDS

30,000 lb. Capacity.

Lifting Range: 53 in. to 78 in. at 2 in. Stepped Increments.

1.5 in. Diameter Steel Quick-release Pin with Lanyard Assembly.

MODEL AB-24-04

SHORT SUPPORT STANDS

60,000 lb. Capacity.

Lifting Range: 12 in. to 18 in. at 2 in.

Stepped Increments.

1.5 in. Diameter Steel Quick-release Pin with Lanyard Assembly.

Model AB-12-20

34

 Call for a FREE demo

Information:

MODEL FRLT-15, FRLT-15-L, & FRLT-30 FRONT & REAR TRUCK ADAPTERS

Lift Accessories ARI-HETRA’s latest lifting solution offers a safe and innovative method for maintaining a wide variety of equipment. By utilizing two ARI-HETRA HDML columns with our exclusive Model FRLT-15 Front & Rear Light Truck Adapter, your shop can service vans, light trucks or generators (full frame access required) by the front and rear frame. Tires and brakes are accessible without using a set of support stands.

How It Works Simply position the two posts at the front and rear of the vehicle, adjust the frame contact points, plug in the posts and press the button. ARI-HETRA’s lifting system raises the vehicle allowing safe access to the under carriage. When you are done using the system, its small form takes up little storage space.

FRLT-15 Front & Rear Light Truck Adapters - 15,000 lb.

Unsurpassed Safety.

Quick Set-Up and Lifting.

Easy-to-Use Controls.

Highest Quality Construction.

Made in the USA.

FRLT-30 Front & Rear Heavy Truck Adapters - 30,000 lb.

30,000 lb. adaptor that works with an HDML-12 system

Top: Ford F-350 Bottom: HMMWV

New: FRLT-15-L Low Profile Front & Rear Truck Adapter

FRLT-30 in use.

ARI-HETRA offers a full line of

Wheel Service Equipment.

35

MODEL TR -10-108 CHASSIS CROSS BEAM

Information:

Accessories

ARI-HETRA’s 32,000 lb. capacity Model TR-10-108 Chassis Cross Beam is a mobile lifting system that provides easy under-vehicle, wheels-free access. The system uses two standard ARI-HETRA HDML posts.

The addition of the TR-10-108 Chassis Cross Beam tailors the system to meet the wheels-free maintenance requirements of any shop.

The Chassis Cross Beam is designed to engage the frame of the vehicle to be lifted. This provides wheelsfree access to the vehicle without the use of jack stands. The lifting pad height is adjustable with Model CS-8-L (standard with Chassis Cross Beam) to avoid beam interference. Built into the Chassis Cross Beam are four caster wheels for quick and easy transport and set-up.

Intended Use For wheels-free access of heavy trucks and buses. For performing brake, axle, differential or preventive maintenance or repairs.

Features Durable wheels for transportation of beam.

Steel construction for years of safe service.

Models available for standard and wide carriage posts.

CS-8-L locks onto beam for added safety.

The chassis cross beam consists of three parts.

Model CS-8-L Supports with Hold Adjustment for TR-10-108 Chassis Cross Beam.

Weight - 25 lb. each

LOW

LIFTING PAD HIGH

LENGTH

DIAMETER

QUANTITY

SHIPPING WEIGHT (lb.)

9 in.

13 in.

137� in.

4 in.

4

500

36

BEAM SIZE

DOLLY WHEELS

Call for a FREE demo

Information:

MODEL TR-10-108-KP KING PIN ADAPTER

Lift Accessories ARI-HETRA’s Model TR-10-108 King Pin Adapter enables lifting of trailers from the fifth wheel coupling without having a tractor attached. This allows for safe maintenance of trailers when used with ARIHETRA’s 4-post lifting system.

Wheels for mobility when not on lifts.

Connect two HDML-mobile posts on either side

(

36.00 36 in.

44.000 44 in.

42.50 42.5 in.

138.00in.

138

ARI-HETRA offers a full line of

Wheel Service Equipment.

37

HEAVY-DUTY ALIGNMENT STANDS Information:

Accessories

The portable ARI-HETRA Model ALS-18 Heavy-Duty Alignment Stands make it easy for you to inspect, adjust and replace steering and suspension components during an alignment by providing ample under vehicle access. These stands are easy to move in place using an ALS-18-5 pallet jack and can be moved when the alignment procedure is complete. Best of all, the stands work with our HDML Mobile Lifting System providing more versatility than just an alignment solution.

Works specifically with ARI-HETRA Mobile Lifting Systems Built-in bubble levels for precise adjustment Adjustable legs to achieve level Built in wheel stops Durable welded steel construction, not bent formed Portable Made in the USA

38

Information:

Lift Accessories

MODEL AH-3000 HI-RISE CLUTCH JACK

ARI-HETRA’s Model AH-3000 Hi-Rise Clutch Jack is a smart, efficient way to replace heavy-duty clutches and flywheels. Its height makes it effective under a Mobile Lift, Pit or In-ground system. The AH-3000 features a two-stage air/hydraulic foot-operated pump that is not only ergonomically smart, but it also leaves your hands free. The multi-position saddle can be adjusted to help fit in tight spaces and help align the bolt holes. You will achieve significant decreases in labor time when you swap driveline components on a lift.

Intended Use For the removal, installation and transportation of heavy-duty 14 in. and 15.5 in. truck and bus clutches and flywheels.

Features Durable casters provide ease of movement and will roll over most small debris.

Full range of movement to position heavy clutches and flywheels.

Wide base has low center of gravity that offers added stability.

Foot pedal safely raises and lowers load.

High reach - 80 in. at clutch center point.

Two-stage Air/Hydraulic pump.

Durable steel construction for years of safe service.

Metered pump provides safe lowering of load.

2 in. spline shaft tilts easily by rotating precision-machined handle.

Call for a FREE demo

SUPPLIED SPLINE SHAFT

HEAD ROTATION

2 in.

360 ˚

LIFT HEIGHT

BASE SIZE

LOCKING SWIVEL CASTERS

LOW

HIGH

LENGTH

WIDTH

DIAMETER

QUANTITY

40 in.

80 in.

41 in.

41 in.

4 in.

4

P.S.I. REQUIRED

SHIPPING WEIGHT (lb.)

100-160

105

39

MULTIPURPOSE PIT OR LIFT JACK AH-MPJ44 Specifications Capacity: 44,000/30,000 lb.

Stroke: 47 in.

Peg-diameter: 55 mm

Width: 33 in.

Length: 43 in.

Maximum height: 87 in.

Lowered height: 44 in.

Operating pressure: 2,364 PSI

Air required: 145 PSI

Weight: 820 lb.

H

Foot pedal operation: ARI-HETRA multipurpose lifts are operated by foot pedals, freeing hands for working on the vehicle.

Rolls Easy: The standard needle roller bearings on the carriage rollers permit the lift to roll effortlessly in the pit.

Durability: The hydraulic piston is chrome plated, for protection against corrosion and wear.

Fully hydraulic lifting unit: Thanks to the corrosion prevention system, during every lifting and lowering movement, the cylinder is submerged in oil on either side of the sealing sleeve. This means that both the piston and the cylinder are constantly in an oil bath, effectively protecting the cylinder walls against corrosion.

Time-saving (I):: The hydro-pneumatic quick lift rapidly moves the piston rod to the lifting point.

Time-saving (II): The hydro-pneumatic forced return rapidly retracts the piston even when unloaded. The piston is in effect “pulled” back into its rest position.

L

Precision: The step-less fine-adjustment stroke permits the pit lift to be positioned accurately on the vehicle. Important for precise lifting and when installing assemblies.

Minimum effort: The pneumatic motor enables the load to be lifted at the push of a button – without any physical effort.

W

Pit Star F/Pit Boy F

40

Information:

Accessories

Information:

MULTIPURPOSE PIT OR LIFT JACK

Lift Accessories Foot pedal operation: ARI-HETRA multipurpose lifts are operated by foot pedals, freeing hands for working on the vehicle.

Specifications Capacity: 44,000/30,000 lb.

Stroke: 47 in.

Rolls Easy: The standard needle roller bearings on the carriage rollers permit the lift to roll effortlessly in the pit.

Peg-diameter: 55 mm

Width: 33 in.

Length: 43 in.

Durability: The hydraulic piston is chrome plated, for protection against corrosion and wear.

Maximum height: 87 in.

Lowered height: 40 in.

Operating pressure: 3,190 PSI

Fully hydraulic lifting unit: Thanks to the corrosion prevention system, during every lifting and lowering movement, the cylinder is submerged in oil on either side of the sealing sleeve. This means that both the piston and the cylinder are constantly in an oil bath, effectively protecting the cylinder walls against corrosion.

Air required: 145 PSI

Weight: 800 lb.

Time-saving (I):: The hydro-pneumatic quick lift rapidly moves the piston rod to the lifting point.

H

Precision: The step-less fine-adjustment stroke permits the pit lift to be positioned accurately on the vehicle. Important for precise lifting and when installing assemblies.

L

Time-saving (II): The hydro-pneumatic forced return rapidly retracts the piston even when unloaded. The piston is in effect “pulled” back into its rest position.

Minimum effort: The pneumatic motor enables the load to be lifted at the push of a button – without any physical effort.

W

ARI-HETRA offers a full line of Wheel Service Equipment.

Pit Star Mobile 41

ACCESSORIES & LOAD SUPPORTING DEVICES Information:

Accessories GA I

GA IV

BHV

H

DB

Four screws cradle the gearbox.

Capacity: 2,200 lb. / 2,400 lb.

The extra-flat version, with largearea rubber support surfaces and two tensioning straps, is particularly versatile.

The adjustment angle is + 12째.

Capacity: 2,200 lb. / 2,400 lb.

The leaf spring assembly device BHV is ideal for fitting and removing heavy leaf springs.

Capacity: 440 lb. / 550 lb.

The hardwood insert on carrying plate H allows heavy loads to be raised without damage.

Capacity: 8,800-44,000 / 10,000-48,000 lb.

Wooden blocks for lowering the traverse onto the support bridge.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

GA II The platform can easily avoid obstructions with an all-round adjustment angle of + 15째 via screws.

Tensioning straps provided to secure the load.

Capacity: 2,200 lb. / 2,400 lb.

GA III One-man operation and an adjustment angle of + 40째 /+ 17째 are the appeal of this gearbox support. Two tensioning straps are available for securing the load.

Capacity: 2,200 lb. / 2,400 lb.

42

AW Truck gearbox supports can be positioned on the support trolley AW and removed from the pit via 2 transfer rails. For use with Gearbox plates GA I - III Capacity: 2,200 lb. / 2,400 lb.

HV The front-axle holding device HV is for fitting and removing rigid front axles.

Capacity: 440 lb. / 550 lb.

X The carrying plate X is standard on all multipurpose jacks.

Capacity: 8,800-66,000 lb. / 10,000-73,000 lb.

R With its rubber surface, carrying plate R is particularly suitable for use with cars.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

U Four different widths in total, for a flexible range of uses.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

P Special support for buses (on frame) (mushroom shaped support).

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

SV Extension between pit lift and load.

Not for use in conjunction with traverses.

Capacity: 8,800-66,000 lb. / 10,000-73,000 lb.

VS For positioning a traverse (on which the vehicle is raised) safely on the support bridge.

Capacity: 8,80044,000/10,00048,000 lb.

range max. 3.5 in. in total), manufactured to pit dimension.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

GSV GS Universal support bridge for topple protection. Pit lift can be used elsewhere.

Capacity: 8,800-66,000 lb. / 10,000-73,000 lb.

GSB Extra-flat support bridge that also fits under low-profile buses.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

GSB Vario Super slim and extremely easy-to-position support bridge, for low-profile buses, with 2 sliders, 2 x DR4 spacer tubes, 2 x X support plates, with flange rollers and sliding axes (adjustment

Adjustable support bridge, pit lift can be re-used, with 2 sliders, 2 x DR4 distance tubes, 2 x X support plates, as well as traverses and tool tray.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

GSU Wide support bridge for lowering the rear axle of buses.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

DR Spacing tubes for equalizing large differences in height between support bridges and the load.

Capacity: 8,800-66,000 lb. / 10,000-73,000 lb.

DS Spacers for level equalization between support bridges/traverses and load.

Capacity: 8,800-66,000 lb. / 10,000-73,000 lb.

ATK Axle traverse for supporting very heavy vehicles safely.

The short version ensures that the load is centrally distributed.

Capacity: 8,800-66,000 lb. / 10,000-73,000 lb.

ATS Both the width and the height of the carrying plate of the standard truck traverse ATS can be adjusted with the spacers on the load carrying plate.

Capacity: 8,800-66,000 lb. / 10,000-73,000 lb.

ATB The very flat traverse provides side-to-side adjustment of the carrying plates.

Load carrying points lying outside the pit can thus be reached.

Particularly suitable for buses.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

ATB N Special traverse for mounting Neoplan buses safely.

Capacity: 8,800-22,000 lb. / 10,000-24,000 lb.

ATB NF The design of ATB NF takes account of the special requirements for supporting lowprofile buses.

Capacity: 8,800-22,000 lb. / 10,000-24,000 lb.

ATEB Special traverse for supporting Evo Bus buses safely.

Capacity: 8,800-22,000 lb. / 10,000-24,000 lb.

ATU The extremely wide adjustment range of 4.75 in. to 38.5 in. and the flat design guarantee a universal working range.

Capacity: 8,800-33,000 lb. / 10,000 - 34,000 lb.

GA I

12” 15.75”

15”

X

ATK VS

Information: GA II

approx. 5.5” 4”-33.5”

R

Lift Accessories

15.75”

23.5”

DB U

ATS approx. 13.75” 4.75”/14.25”- 38.5”

GA III

GS

U 145 15.75”

approx. 9.25”

23.5”

ATB GSB

U 175

approx. 8” 35.5”- 55”

approx. 6.5” GA IV 15.5”

ATB N

GSB Vario 21.5” U 220

approx. 8” approx. 7.5” GSV

H

ATB NF

35.5” - 46.5”

approx. 10.25”

approx. 7”

AW

36.25”- 55”

ATEB

P

GSU approx. 8.5”

DR 4 15.75”

HV SV 150 6”

DS 1

5”- 38.5”

4”

approx. 8”

DR 6

DS 2 BHV

16.5”- 40”

ATU

6” SV 250

23.5” 10”

approx. 8”

DS 3 10”

43

MODEL AH-2500 & AH-4000 TRANSMISSION JACK

Information:

ARI-HETRA’s Transmission Jacks are one of the safest ways to raise productivity at your shop. This single-stage electro/hydraulic transmission jack provides a reliable platform for installing and removing almost any transmission or driveline component. Large caster wheels, a swivel platform and a built-in remote enable technicians to position parts precisely without hurting their backs. The versatile cradle and built-in adapter toolbox ensure compatibility on almost any vehicle.

Intended Use For the removal and installation of truck and bus transmissions and driveline components including: Allison, Mack, Fuller and Spicer.

Features Each AH-2500 comes equipped with a ten foot (10’) pendant remote control.

Durable six-inch (6 in.) lockable casters provide ease of movement, and will roll over most small debris.

Universal cradle has numerous adjustable configurations to service most heavy duty driveline components.

Durable steel construction for years of safe service.

Cradle brackets and adapters supplied in a built-in tool box.

Made in the USA. LOCKING SWIVEL CASTERS

OVERALL DIMENSIONS

LOW

LIFT HEIGHT HIGH

FRONT

CRADLE ADJUSTMENT BACK

SIDE-TO-SIDE

DIAMETER

QUANTITY

L

W

H

36 in.

71 in.

12˚

12˚

12˚

6 in.

4

58 in.

42 in.

71 in.

HEAD ROTATION

SHIPPING WEIGHT (lb.)

120˚

550

MODEL AH-2500-BP & AH-4000-BP BATTERY-POWERED TRANSMISSION JACK ARI-HETRA’s Model AH-2500-BP Transmission Jack offers the flexibility of battery power and 110V charging with all the robust strength and features of our AH-2500.

MODEL AH-4000/AH-4000-BP TRANSMISSION JACK Same features as the AH-2500 but is “beefed up” for a load rating of 4,000 lb.

44

Pendant remote allows technicians to control the AH-2500 via a ten foot (10’) cord.

Accessories

MODEL TT-2000 Information:

Lift Accessories

LIFTING TABLE

ARI-HETRA’s Model TT-2000 Lifting Table is a smart, efficient way to replace heavy under-vehicle components. Simply position table under lifted vehicle and raise table platform to contact and support the component to be removed. Remove component connecting fasteners and lower the table platform. The table can now be rolled out from under the raised vehicle to an appropriate work area.

Intended Use For the removal and installation of heavy, undervehicle components such as transmissions, clutches, power take-offs, drive shafts, etc.

Features Lifetime self-lubricating, anti-friction bushings at all pivot points.

Three-cylinder electric/hydraulic pump.

Smooth steel lifting surface.

Tool storage tray.

Durable steel construction for years of safe service.

Durable casters provide ease of movement and will roll over most small debris.

Watertight, NEMA 4 Remote allows technicians to control the TT-2000 via a (10’) cable.

TT-2000-S Transmission Adapter This adapter works with the TT‑2000 for removal and replacement of transmissions and differentials. This removable adapter offers slope adjustment, load braces, chains and adjusting bolts.

Low profile TT-2000L available with 27 in. collapsed height.

TOP SURFACE

MOTOR

36 in. x 18 in.

3/4 hp

LIFT HEIGHT

Adapter Capacity 2,500 lb.

Side-to-Side Rotation 40 degrees Forward-Aft Rotation 20 degrees

BASE SIZE

LOCKING SWIVEL CASTERS

LOW

HIGH

LENGTH

WIDTH

DIAMETER

QUANTITY

LIFTING TIME

WEIGHT (lb.)

36 in.

72 in.

36 in.

24 in.

6 in.

4

26 seconds

480

ARI-HETRA offers a full line of

Exhaust Extraction Equipment.

45

MODEL AH-06187 DIESEL ENGINE STAND

Information:

Accessories

ARI-HETRA’s Model AH-06187 Diesel Engine Stand features a solid base structure for working on heavyduty diesel engines. This stand eliminates the need to struggle with rebuilding engines on a bench or on the ground. The sturdy AH-06187 helps reduce the risk of damaging expensive diesel engines. The unit ships with a universal engine adapter. We also offer custom adapters that tailor the engine stand to your shop’s exact needs and specifications.

Intended Use For the safe handling, rebuilding and positioning of most diesel engines.

Features Mounting head tilts for engine clearance in 360° rotation.

95 to 1 worm gear drive and long handle provide easy engine rotation.

Floor lock keeps stand from moving during repairs.

Full range of optional adapters offered.

Integral hydraulic jack for lifting engine.

ROTATIONAL CLEARANCE

FROM MOUNTING HEAD TO GROUND

35 in. to 43 in.

OVERALL DIMENSIONS

WHEEL DIAMETERS

HEIGHT

WIDTH

LENGTH

FRONT

REAR

45 in.

50 in.

54 in.

7 in.

7 in.

SHIPPING WEIGHT (lb.)

675

Shown with optional adapters.

46

Optional Adapter Accessories: Model AH-26187 - Detroit Adapter Model AH-36187 - Cummins Adapter Model AH-46187 - CAT Adapter Model AH-56187 - International Adapter Model AH-66187 - MACK Adapter Model AH-76187 - Allison Adapter

Information:

Lift Accessories

MODEL AH-09756 ENGINE HOIST

ARI-HETRA’s Engine Hoist is an essential lifting accessory for the heaviest components of your vehicle. Its strength, boom rotation, and spring-retracting chain make it a maneuverable tool that allows technicians to maximize their work space. The lifting capacity combined with its collapsible frame for storage make it the perfect tool for any heavy-duty shop.

Features Spring-retracting chain Extension tube extends at 15 in. increments Base frame collapses for tight storage area T-Handles raise legs to aid in extending and retracting base

Maximum Capacity: 9,000 lb.

10 degree left-to-right boom rotation Electric-hydraulic battery-powered unit Operates by hand-held remote control

Extended

Collapsed

BOOM HEIGHT

BASE SIZE

LOW

HIGH

EXTENDED

COLLAPSED

WIDTH

43 in.

145 in.

125 in.

63 in.

51 in.

BOOM ROTATION

SHIPPING WEIGHT (lb.)

10 DEG.

1,700

ARI-HETRA offers a full line of

Wheel Service Equipment.

47

MODEL WOD-25

SELF-EVACUATING WASTE OIL DRAIN

Information:

Accessories

ARI-HETRA’s Model WOD-25 Self-Evacuating Waste Oil Drain is a heavy-duty, portable waste oil drain that evacuates its 25 gallon capacity in less than 2 minutes without the use of a pump.

The WOD-25 features a large telescoping funnel with a full-extended height of 63 in. A separate dolly with swivel caster wheels make the unit easy to maneuver. The unit is simple to use. Make a camloc connection to the supplied hose on the waste oil bulk tank, then connect the air supply and the system does the rest. A unique floating ball check-valve is the heart of the system. It allows oil to enter, but seals the container for evacuation the moment air is connected.

Intended Use Clean and environmentally safe removal of waste engine oil, transmission and differential oil in vehicles being serviced on a lift.

Safety The WOD-25 represents a Safety First 200 PSI National Board certified container. The WOD-25 was the first to be used with an ASME coded tank. Low pressure operation is safeguarded with a preset tamper-proof air regulator and 30 PSI safety pop-off.

Features Separate dolly with swivel caster wheels.

Large telescoping funnel.

Sight gauge tells at a glance when tank is full.

The WOD-25 can handle discharge runs of up to 100 feet.

No pump to wear out or maintain.

Easy to use.

Made in the USA. EXTENDED HEIGHT 63 in.

48

CONTAINER DIMENSIONS HEIGHT

WIDTH

32 in.

16 in.

CAPACITY

P.S.I. REQUIRED

SHIPPING WEIGHT (lb.)

25 GALLONS

26

135

Information:

MODEL WOD-65

VISIBLE WASTE OIL DRAIN

Lift Accessories ARI-HETRA’s Model WOD-65 High Capacity Waste Fluids Tank is a heavy-duty, portable viewable tank that allows you to store up to 65 gallons.

The WOD-65 features a large telescoping funnel with a fully-extended height of 66 in.. The translucent tank is marked by gallon increments, allowing for clear visibility of fluid level. The 6 in. tool tray is equipped with “S” hooks around the perimeter for extra storage.

Intended Use Clean and environmentally safe removal of waste engine oil, transmission and differential oil in vehicles being serviced on a lift.

Safety Low pressure tank with release vent. The tank is composed of low density polypropylene with a visual gauge molded in, so you can safely monitor fluid levels. Rated for class 3 combustible fluids according to NFPA 30. It can handle oil, small amounts of diesel fluid and antifreeze.

Features Large telescoping octagonal funnel.

Visual tank with gallon markers for clear visibility of fluid level.

Two 4 in. Ø swivel, and two rigid casters for easy maneuverability.

6 in. tool storage tray.

“S hooks” around perimeter of tool tray for tool storage.

EXTENDED HEIGHT 66 in.

CONTAINER DIMENSIONS HEIGHT

WIDTH

60 in.

41 in.

CAPACITY

P.S.I. REQUIRED

SHIPPING WEIGHT

65 GALLONS

30 - 100

300 lb.

49

MODEL INVR-10

PORTABLE INVERTER CART

Information:

ARI-HETRA’s Model INVR-10 Portable Inverter Cart gives you access to power, no matter where you are.

This Inverter Cart features tough steel-cage construction, diamond-plate panels and rugged pneumatic tires. This unit survives the most demanding environments. Use as a single source for 24-volt, 110, 220 single-phase or 3-phase, the unit is rechargeable by a 24-volt vehicle charging system or a 110 outlet.

Odyssey® drycell batteries offer worry-free shipping.

Accessories

Intended Use Portable power pack that stores electric for field use that does not require an outside electrical source. Will power (or convert) any 220 VAC, 60 HZ, single or 3-phase and/or 110 VAC, 60 HZ, single-phase tool, appliance or equipment within the INVR’s power rating.

Features Withstands Vibrating Environments.

LED Inverter Power Switch.

Elapsed-Time Hour Meter.

Remote Switch Hook-up (Optional).

Full 1 Year Parts and Labor Warranty.

INPUT CURRENT: (AMPS DC) INPUT VOLTAGE: (VDC) SIZE: (IN. LxWxH) WEIGHT: (lb.)

EFFICIENCY: BATTERY CHARGER INPUT: BATTERY CHARGER OUTPUT: OUTPUT POWER: HORSEPOWER RATING: OUTPUT RATING: (BREAKER) OUTPUT CURRENT: (AMPS (CONTINUOUS) OUTPUT SURGE: OUTPUT VOLTAGE: OUTPUT FREQUENCY:

Automatic Short-Circuit Shutdown.

Automatic High-Temperature Shutdown.

Automatic Surge-Overload Protection.

Output Circuit Breaker.

Non-Spillable Odyssey® Drycell Batteries.

C

A

INVR-10 has outlets for a multitude of uses.

D

E

F

B

up to 300 24 to 36 43 in. x 29 in. x 36 in.

570 Greater than 85% 24-volt NATO connector 110 AC battery charger 28.5-volt DC 40 amp

24-volt NATO Connector LED Power Switch 220 3-Phase, 30 amp

12,000 watts + surge

110 Single-Phase, 30 amp

10 hp

220 Single-Phase, 30 amp

14,400 watts (40 amps at 120 VAC)

110 Charger Male Plug

14 amps per phase at 220 VAC 30 amps per single-phase at 110 35,000 watts 220/110 VAC RMS 60 HZ + 1%, 3-phase/single-phase

Ask about our full library of 50

Detailed Electronic Specifications.

Information:

Lift Accessories

MODEL KPP-143

HEAVY-DUTY KING PIN PRESS The KPP-143 presses out steering knuckle king pins and spring pin bushings on trucks and buses. Its front wheel dollies, adjustable press frame, and pneumatic lift and return stroke makes it easy to maneuver and set up around all potential obstacles. The KPP-143 has a responsive hand pump that drastically reduces risk of damage that could occur to the vehicle’s components. All of these features complimented by its 143,000 lb. of compression force make it an efficient and effective pressing tool for changing king pins and spring-pin bushings on heavy-duty vehicles.

Included Description Steering Knuckle King Pin Press Sleeve Set consisting of: Mandrel Ø21.5 mm Mandrel Ø30 mm Mandrel Ø34 mm Press piece Ø58 mm with O-ring Support sleeve Ø63 mm Support sleeve Ø64 mm Support sleeve Ø69 mm Support sleeve Ø90 mm

Call for a FREE demo

Quantity 1 1 1 1 1 1 1 1 1 1

Retainer adapter Ø 2.7.5 in. for bridge

1

Puller bolt bridge 12 in. width Puller bolt bridge 8.5 in. width

1 1

Specifications

Compression force: 143,000 lb.

Clearance between puller bolts: 12 in.

Clearance height (Maximum): 19 in.

Stroke: 4.75 in.

Pressure: 6,091 psi

Air supply: 188 psi

Weight: 285 lb.

51

HDEP Series

Electro-Hydraulic Press HDEP-33 HDEP-44 HDEP-55 HDEP-77 HDEP-110

Information:

33 TON Capacity 44 TON Capacity 55 TON Capacity 77 TON Capacity 110 TON Capacity

Accessories

Super Shop Press ARI-HETRA’s HDEP Series offer ease-of-use in high-quality, versatile heavy-duty presses. These presses are built specifically for the extreme needs of the heavy-duty industry. The powerful electro-hydraulic pump and the solid steel table support pins make the HDEP series press “built-tolast”. The tough powder-coated finish and the chrome-plated ram are just some examples of the overall construction quality. The smooth operation of the pump and built-in safety features make for an easy-to-use, low fatigue work experience. Whether operating by itself or by adding some of our available accessories, this press is versatile enough to handle a wide range of bearings, U-joints, kingpins, etc..

Features

Powder-coated Paint Finish “Safety Green”.

Powerful Electro-Hydraulic Pump.

Solid Steel Construction.

Chrome-Plated Steel Ram. Automatic Return Hydraulic Ram. Safety Cylinder Lock.

Pressure Gauge.

Three-Position Handle (Up - Neutral - Down).

Winch for Adjustable Worktable.

Less than 70 Decibel Operating Noise.

E

F

Technical Info CAPACITY

HDEP-33

33 TON

HDEP-44

44 TON

HDEP-55

B

C

Three-Phase Motor 220/440V 60Hz MODEL NUMBER

F

RAM STROKE

FLUID CAPACITY

RAM SPEED*

SHIPPING WEIGHT

79 in. 24 in. 63 in. 28 in. 39 in.

7 in.

10 in.

2� QT

12 IPM

707 lb.

82 in. 34 in. 62 in. 31 in. 45 in.

8 in.

10 in.

2� QT

12 IPM

893 lb.

55 TON

82 in. 34 in. 62 in. 31 in. 45 in.

8 in.

10 in.

2� QT

8 IPM

1,085 lb.

HDEP-77

77 TON

87 in. 35 in. 69 in. 35 in. 44 in. 10 in.

12 in.

4� QT

10 IPM

1,631 lb.

HDEP-110

110 TON

89 in. 35 in. 76 in. 40 in. 42 in. 11 in.

12 in.

4� QT

7 IPM

2,205 lb.

A

B

C

D

E

A

D

* IPM = Inches Per Minute

ARI-HETRA offers a full line of 52

Wheel Service Equipment.

HDMP Series Information:

Lift Accessories

Two-Speed Manual Press HDMP-33 HDMP-44 HDMP-55 HDMP-77 HDMP-110

33 TON Capacity 44 TON Capacity 55 TON Capacity 77 TON Capacity 110 TON Capacity

Workhorse Shop Press ARI-HETRA’s HDMP Series offer the best value in high-quality, versatile heavy-duty presses. Our presses are built to withstand the unique stress of large truck and bus repair. From the solid steel table support pins to the tough-as-nails finish, the HDMP series press is built to last. Whether operating by itself or by adding some of our available accessories, this press is versatile enough to handle a wide range of bearings, U-joints, and other applications.

Features Powder-Coated Paint Finish “Safety Green”.

Powerful Two-speed Hand Pump.

Solid Steel Construction.

Pressure Gauge.

Chrome-Plated Steel Ram. Winch for Adjustable Worktable.

E

A

D F

Technical Info MODEL NUMBER

CAPACITY

C A

B

C

D

E

F

RAM STROKE

B

SHIPPING WEIGHT

HDMP-33

33 TON

79 in. 24 in. 51 in. 28 in. 39 in.

7 in.

7� in.

617 lb.

HDMP-44

44 TON

83 in. 34 in. 56 in. 31 in. 45 in.

8 in.

7� in.

893 lb.

8 in.

HDMP-55

55 TON

83 in. 34 in. 56 in. 31 in. 45 in.

7� in.

981 lb.

HDMP-77

77 TON

88 in. 35 in. 62 in. 34 in. 45 in. 10 in.

8 in.

1,543 lb.

HDMP-110

110 TON

90 in. 35 in. 68 in. 40 in. 42 in. 11 in.

8� in.

2,117 lb.

53

OVERSIZED Series Electro-Hydraulic Press

Information:

Accessories

Other presses ranging from 110 to 330 ton capacity available. Call an ARI-HETRA Regional Manager for more details.

54

Information:

Optional Accessories

Lift Accessories V-Blocks Two steel blocks feature a “V� cut-out on one edge and a platform base on the other. Size and weight vary depending on press capacity. For presses up to 330 ton capacity.

Custom Accessories?

Do you have special pressing requirements? We can help by making custom accessories to go with your press. Just call us at 800-562-3250 to discuss your needs with an ARI-HETRA Regional Manager.

Pin Extracting Plate Steel Pin Extracting Plate features three different size circular cut-outs. Size and weight vary depending on press capacity. For presses up to 155 ton capacity.

T-Slot Milled Plate Solid-milled base plate for T-Slot work holding components. Size and weight vary depending on press capacity.

Adjustable Center Point A pair of adjustable centers for presses up to 330 ton capacity. Size and weight vary depending on press capacity.

Call for a FREE demo

55

EXHAUST EXTRACTION CANE

NOZZLES

ALUMINUM SLOTTED DUCTING

HOSE REELS CNG HOSE REELS

56

Information:

Exhaust Extraction

DO YOU NEED AN EXHAUST EXTRACTION SYSTEM? You do need an Exhaust Extraction System It is well-known that serious health issues can arise from repeated exposure to vehicle exhaust emissions.

There are negative effects of exposure, both short-term and long-term.

Short-term effects of exposure

Long-term effects of exposure

After years of research, the EPA reports that short-term exposure to diesel exhaust fumes can cause irritation and inflammation of the lungs, worsen allergies and contribute to asthma.1

Most of the over two dozen well-designed worker studies found lung cancer increases in those exposed to diesel exhaust for over a decade.2

Other short-term effects of exposure

Light-headedness Heartburn Headache Weakness Chest tightness

Partial list of Diesel Exhaust Chemicals Carbon Dioxide Carbon Monoxide Nitrogen Dioxide Nitric Oxide Sulfur Dioxide

Hydrogen Sulfide Acrolein Benzene Formaldehyde

Wheezing Vomiting Irritation of eyes, nose and throat Numbness and tingling in extremities

What is the solution?

The good news is, there is a successful way to keep workers breathing safe, healthy air. OSHA recommends the use of a source-capture device like ARI-HETRA’s Exhaust Extraction System. By removing vehicle emissions directly from the tailpipe, harmful fumes do not circulate through the building the way they do when using a ceiling exhaust fan or with open bay doors. Furthermore, even when filtered, these fumes are still dangerous to your health.

There are many chemicals in exhaust fumes, and ARI-HETRA’s Exhaust Extraction Systems keep them out of your shop.

A source-capture exhaust extraction system is the best way to remove toxic exhaust chemicals from your shop.

Review the following pages to find out which Exhaust Extraction System is right for your shop.

References 1. “Fact Sheet: Diesel Exhaust,” American Federation of State, County, and Municipal Employees, 2002.

2. “Exhausted by Diesel: How American’s Dependence on Diesel Engines Threatens Our Health, Chapters 2 and 3,” NRDC, April 1998.

ARI-HETRA offers a full line of

Lifting Systems.

57

OUR PRODUCT RANGE ARI-HETRA handles all aspects of your Exhaust Extraction Project, from materials to installation to training. No matter what industry you are in, we can customize an Exhaust Extraction System for your needs.

We offer:

Information:

Exhaust Extraction

Fully-Automatic Exhaust Extraction Systems.

Manual Exhaust Extraction Systems.

High-Temperature, CNG and LNG Hoses.

SAFEConnect™ System for Emergency Vehicles.

High-Vacuum Extraction Systems.

Welding-Fume Extraction Systems.

Sound-Absorbing Systems and Cabinets.

Fans and Pipe Systems.

Fully-Customized Exhaust Extraction Systems.

ARI-FLEX Extraction Arms.

Suction Ducts, Exhaust Gas Nozzles, Hoses & Reels.

ARI-HETRA carries a full line of heat, fuel and oil resistant hoses and nozzles.

ARI-HETRA offers a full line of 58

Wheel Service Equipment.

Information:

OUR PRODUCT RANGE

Exhaust Extraction Dyno Exhaust Extraction Systems

Hose Reel Exhaust Extraction Systems

ARI-HETRA carries a full line of heat, fuel and oil resistant specialty nozzles.

Call for a FREE demo

59

IN-HOUSE ENGINEERING AND DESIGN All of ARI-HETRA’s Exhaust Extraction Systems are custom designed by our in-house engineering design team. We have experience with a wide range of service requirements for cars, trucks, buses and more.

ARI-HETRA’s engineers provide solutions for installation and construction needs of your exhaust extraction project, from new construction to renovation or upgrading of existing systems.

Information:

Exhaust Extraction

Features

We can use your blueprints or do a site survey.

Experience in many diverse shops.

First-hand knowledge of products.

Use of the latest Computer Aided Drafting technology.

TOOLS FOR ARCHITECTS AND ENGINEERS We provide detailed specifications for your exhaust extraction project. Each product has written specifications and detailed CAD Blocks. Call and ask for our engineering and architect service department for more information.

We work with your building’s blueprints to build the best performing system for your facility.

Features Written Specifications.

CAD Blocks.

Electronic or hard copy available.

ARI-HETRA Tech-Specs

60

ALUMINUM SLOTTED DUCT Information:

Exhaust Extraction

CARS AND LIGHT TRUCKS

ARI-1000 Aluminum Slotted Suction Ducting System ARI-1000 Aluminum Slotted Suction Ducting System is designed for cars and light trucks. With the Aluminum Slotted Suction Ducting System, the hose reels and trolleys are mobile and can easily be used in different bays. ARI-HETRA’s source-capture exhaust system using the Aluminum Slotted Suction Ducting will keep your shop free of any harmful exhaust gases.

Intended Use For exhaust extraction of cars and light trucks in environments where maximum work bay flexibility is required.

Features

ARI-1000 features an internal hose carriage support.

Lightweight extruded aluminum.

Permits you to move vehicles around your shop with the exhaust extraction system still connected.

Enables you to share the system between service bays.

Unlimited ducting length.

One-piece air duct serves as the guide rails for the hose carriages and the channel for the sealing lips.

Neoprene sealing lips are installed into the channel with steel-spring clips making the channel airtight.

The neoprene sealing lips are resistant to exhaust gas and other chemicals.

ARI-HETRA offers a full line of

Wheel Service Equipment.

61

ALUMINUM SLOTTED DUCT TRUCKS AND BUSES

ARI-2000 Aluminum Slotted Suction Ducting

Information:

Exhaust Extraction

ARI-2000 Aluminum Slotted Suction Ducting is designed for trucks and buses. The high volume of exhaust that is produced by these vehicles makes it necessary to have a larger ducting system. The Aluminum Slotted Suction Ducting System’s hose reels and trolleys are mobile and can be easily moved from one service bay to another. ARI-HETRA’s source-capture exhaust system keeps the air quality safe for employees in your shop.

Intended Use For exhaust extraction of heavy trucks and buses in environments requiring maximum work bay flexibility.

Features

Lightweight extruded aluminum.

Permits you to move vehicles around your shop with the exhaust extraction system still connected.

Can be used with Welding Fume Extraction Systems.

Enables you to share the system between service bays.

The ducting is made of solid extruded aluminum.

The side flanges form a double rail to support and guide the hose carriage.

Neoprene sealing lips are installed into the channel with steel-spring clips to make the channel airtight.

The neoprene sealing lips are resistant against exhaust gas and other chemicals.

ARI-2000 features an external hose carriage support.

Aluminum Slotted Suction Ducting Available: ARI-2000 Aluminum Slotted Suction Ducting for trucks and buses.

ARI-3000 Aluminum Slotted Suction Ducting for heavy-duty vehicles.

62

Call for a FREE demo

HOSE REEL EXTRACTION SYSTEMS Information:

Exhaust Extraction

ARI-HETRA’s Exhaust Extraction hose reels offer one of the most convenient methods available for extracting and removing harmful exhaust fumes and gases. All reels carry a length of high-quality exhaust hose on a drum, fixed at high levels, which can be unwound when required and attached to the vehicle’s exhaust using a clamping nozzle. When not in use, the hose is retracted onto the reel, leaving floors clear of obstruction; thereby promoting safety in garages while improving air quality.

Intended Use A retractable source-capture system for use on idling vehicles to provide clean air in a workshop environment.

Features

Spring-operated or motor driven.

Fixed mounted or movable in suction ducts.

Hose reel with single fan or central fan.

Standard or customized hose reels.

8 in. diameter motorized hose reels available.

Pendant switch/wall switch/infrared or radio remote controls.

Built-in Damper.

ARI-HETRA offers a full line of

Lifting Systems.

63

TELESCOPING EXTRACTION EXHAUST CANE MODEL 999-907

Information:

Exhaust Extraction

Versatile Exhaust Cane ARI-HETRA’s telescoping exhaust extraction cane is a versatile tool making heavy-duty exhaust Optional Hose Reel extraction easy. The exhaust cane’s nozzle is customizable to meet the specifications of various sized Cart and shaped exhaust systems, which include exhaust diffusers that are typically featured on trash 110 volt fan trucks, motor coach exhausts that rest flat against the top of the bus, standard top stacks, and various 25 feet of retractable hose other exhaust system designs. It also features 59 in. of adjustable height to match the height of various 15 feet of extension hose exhaust stacks.

4 caster wheels The cane is positioned around or above the exhaust diffuser and uses the shop’s existing fan-powered exhaust extraction system to draw in diesel fumes. This vacuum design eliminates the need for clamps and metal-to-metal contact, making it a safe tool that minimizes damage to your fleet.

Features Rack and pinion height adjustability Lockable 5 in. caster wheels 100 in. - 159 in. height adjustment

Trash Truck

Custom hood shapes available 6 in. diameter steel extraction tube Powder-coated finish

110 V Fan Available

Transit Bus

High temperature stainless steel hoods provide source capture on many styles of exhaust diffusers.

ARI-HETRA offers a full line of 64

Wheel Service Equipment.

CNG EXHAUST APPLICATION

Information:

Exhaust Extraction As the technology for converting diesel buses to continues to improve, many shops are making the switch from conventional diesel maintenance shops – to shops that can handle the unique high temperature needs of vehicles. ARI-HETRA’s CNG Extraction Systems can help ease your transition to a safe and dependable maintenance facility.

Intended Use High-quality exhaust extraction systems that meet the high temperature needs of CNG vehicles.

Features

High temperature 1200° F CNG exhaust hose installed at a specialized maintenance facility.

1200° F rated.

Motorized Hose Reels.

Spring-loaded Hose Reels.

Pendant / Radio remote available.

Spark-resistant fans.

Stainless steel nozzle and clamping device.

ARI-HETRA offers a full line of

Lifting Systems.

65

WELDING FUME EXTRACTION & HIGH-VACUUM EXTRACTION SYSTEMS Pollution from fumes, gas and dust is a serious problem in an enclosed shop environment.

Most welding fume particles are not breathable, and can be comprised of up to 80% sub micron-sized particles. The best way to remove this problem is with a high-vacuum ARI-HETRA’s Welding Fume Extraction System.

Information:

Exhaust Extraction

Intended Use Ventilation of the workshop and preventing air pollutants from spreading throughout the shop.

Available Products ARIflex is lightweight, compact, and easily positioned, especially when paired with outer articulating arm. To be used in connection with a central suction system.

ARIflex Max F uses suction trunk type ARIflex Max with a high CFM flow rate fan attached. It is a very easy “do it yourself” installation.

ARI-A with outer parallelogram arm is built for heavy-duty applications. It has a wide range of motion when used with an Aluminum Slotted Suction Duct System.

Exhaust Extraction Systems used with Slotted Duct widens the area of possible extraction.

66

Welding Extraction System with outer parallelogram arm

Multi-position design allows you to tailor extraction system to your projects.

Information:

CUSTOM EXHAUST EXTRACTION SOLUTIONS

Exhaust Extraction ARI-HETRA customizes Exhaust Extraction Systems to work for unique and specific needs. Contact us to customize an Exhaust Extraction solution for you.

Custom Systems for Automobile Assembly

360째 Multipurpose Hose Trolley

Exhaust Cane

Custom Train/Rail Exhaust Systems Custom Exhaust Applications

ARI-HETRA offers a full line of

Lifting Systems.

67

Floor Jacks

Computer Wheel Balancers

Tire Changers

Brake Lathes

Tire Cages

Tire Changers

68

HEAVY-DUTY TIRE CHANGER

Information:

MODEL WS-12660

Wheel Service

TECHNICAL DATA

WS-12660

Chuck rotation motor (with ext.)

3 - 4 hp (220 V - 3 ph - 60 Hz)

Hydraulic drive unit motor

1.5 hp 13 in. - 40 in. (14 in. - 60 in.)

112 in. (2,850 mm) 60 in. (1,525 mm) 3 in.

3,880 lb.

90,252 N 6,172 lb.

Rim Ø (with ext.)

Max. wheel Ø Max. allowed wheel width Min. clamp Ø Shipping Weight Bead breaker power Max wheel weight Chuck rotation speed (rev/min)

13 in. - 40 in.

14 in. - 60 in.

60 in.

4.5 - 9 rpm

Dimensions

110 in.(L) x 106 in.(W) x 82 in.(H)

Shipping Dimensions

104 in.(L) x 88.5 in.(W) x 44 in.(H)

The ARI-HETRA Model WS-12660 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, tractor, agricultural and earth-moving equipment tires.

Standard Accessories

112 in.

Bead breaking lever Rim clamp Alloy rim clamps Set of extensions for increased rim size capacity

Product Features

6-Jaw Hydraulic Chuck

Call for a FREE demo

Six-jaw universal chuck with two rotation speeds Self-centering chuck with power regulation Pivoting tool for easier bead-breaking operation Positioning and changing movements of tool controlled directly via wireless remote control Automatic working arm Wireless remote control unit offers best ergonomic position for operator Strong frame fully welded on a metal base

69

HEAVY-DUTY TIRE CHANGER

Information:

MODEL WS-12650

Wheel Service

13 in. - 40 in.

14 in. - 56 in.

90 in.

49 in.

TECHNICAL DATA

WS-12650

Chuck rotation motor (with ext.)

3 - 4 hp (220 V - 3 ph - 60 Hz)

Hydraulic drive unit motor

1.5 hp 13 in. - 40 in. (14 in. - 56 in.)

90 in. (2,300 mm) 49 in. (1,250 mm) 3 in.

2,169 lb.

37,130 N

Rim Ø (with ext.)

Max. wheel Ø Max. allowed wheel width Min. clamp Ø Shipping Weight Bead breaker power Max wheel weight Chuck rotation speed (rev/min)

The ARI-HETRA Model WS-12650 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, tractor, agricultural and earth-moving equipment tires.

Product Features

70

Six-jaw universal chuck with two rotation speeds Automatic working arm and trolley Working arm with quick rotation system Self-centering chuck with power regulation Pivoting tool for easier bead-breaking operation Pneumatic controlled tool arm Wireless remote control for safer and practical work Strong frame fully welded on a metal base

3,086 lb.

4.5 - 9 rpm

Dimensions

97 in.(L) x 84 in.(W) x 69 in.(H)

Shipping Dimensions

89 in.(L) x 77 in.(W) x 45 in.(H)

Standard Accessories

Bead breaking lever Rim clamp Alloy rim clamps Set of extensions for increased rim size capacity

6-Jaw Hydraulic Chuck

HEAVY-DUTY TIRE CHANGER

Information:

Wheel Service

TECHNICAL DATA

WS-12645

Chuck rotation motor (with ext.)

3 - 4 hp (220 V - 3 ph - 60 Hz)

Hydraulic drive unit motor

1.5 hp 13 in. - 40 in. (14 in. - 56 in.)

88 in. (2,250 mm) 45 in. (1,150 mm) 3 in.

2,087 lb.

37,130 N

Rim Ø (with ext.)

Max. wheel Ø Max. allowed wheel width Min. clamp Ø Shipping Weight Bead breaker power Max wheel weight Chuck rotation speed (rev/min)

MODEL WS-12645

13 in. - 40 in.

14 in. - 56 in.

88 in.

45 in.

2,645 lb.

4.5 - 9 rpm

Dimensions

98 in.(L) x 94 in.(W) x 69 in.(H)

Shipping Dimensions

76 in.(L) x 89 in.(W) x 42 in.(H)

Standard Accessories

Bead breaking lever Rim clamp Alloy rim clamps Set of extensions for increased rim size capacity

The ARI-HETRA Model WS-12645 Heavy-Duty Electro-Hydraulic, Automatic Tire Changer easily mounts and dismounts truck, bus, tractor, agricultural and earth-moving equipment tires.

Product Features Four-jaw universal chuck with two rotation speeds

4-Jaw Hydraulic Chuck

Call for a FREE demo

Self- centering chuck with power regulation Bi-directional movement of the clamping jaws in two different speeds Cable remote control Pivoting tool for easier bead-breaking operation Trolley with hydraulic movement Strong frame fully welded on metal base

71

Heavy-Duty Tire Changer

Information:

Model WS-12630

Wheel Service

14 in. - 26 in.

63 in.

31 in.

TECHNICAL DATA

WS-12630

Chuck rotation motor

3 hp (220 V - 3 ph - 60 Hz)

Hydraulic drive unit motor

Dimensions

1.5 hp 14 in. - 26 in.

63 in. (1,600 mm) 31 in. (800 mm) 3 in.

1,267 lb.

3,086 lb.

73 in.(L) x 71 in.(W) x 49 in.(H)

Shipping Dimensions

60 in.(L) x 75 in.(W) x 38 in.(H)

Rim Ø (with ext.)

Max. wheel Ø Max. allowed wheel width Min. clamp Ø Shipping Weight Max wheel weight

Standard Accessories Bead breaking lever Rim pliers Alloy rim clamps

The ARI-HETRA Model WS-12630 Heavy-Duty Electro-Hydraulic, Manual Tire Changer easily mounts and dismounts truck, bus, and super-single tires.

Product Features

72

Four-jaw universal chuck with power regulation valve Self-centering chuck with power regulation valve Hydraulic pressure for fitting the carriage, lifting arm and clamping device Bi-directional movement of the clamping jaws Cable remote control Pivoting tool for easier bead-breaking operation Trolley with hydraulic movement

4-Jaw Hydraulic Chuck

Information:

Wheel Service

Heavy-Duty Tire Changer Optional Accessories

Tubeless Roller

Chuck Extensions Kit

WSA 695 300 102

WSA 695 301 681

Model WS-12660 Model WS-12650 Model WS-12645 Model WS-12630

Pneumatic Bead Breaker Small center clamp diameter adapters

WSA 695 103 526

Model WS-12660 Model WS-12650 Model WS-12645

Thick Rim Adapters WSA 695 301 748

Model WS-12660 Model WS-12650 Model WS-12645 Model WS-12630

Model WS-12660 Model WS-12650 Model WS-12645

Center Hole Adapters- 3 in. min Ă˜

Heavy Duty Pliers WSA 695 300 099

WSA 695 301 747

Model WS-12660 Model WS-12650 Model WS-12645

Model WS-12660 Model WS-12650 Model WS-12645

73

Heavy-Duty Mobile Wheel Service Information: Model WS-561-C

Wheel Service

Latest Tire Changing Technology ARI-HETRA’s Model WS-561-C is an electrohydraulic tire changer for mounting/demounting truck and bus tires with rims from 13 in. up to 27 in. Its compact frame makes it ideal for installation inside vans for mobile tire service. Once the tire changer is installed inside the van, it easily and quickly tilts outside the van, creating a comfortable and versatile work area, where the operating arm and clamping chuck arm move and lift tires with a max. width of up to 34 in., and a max. diameter of up to 63 in.

All Day, Everyday This tire changer has been designed as an ergonomic alternative to traditional methods of tire replacement by hand. By using this machine a technician can safely change many tires a day, a week, a year with little wear and tear on their body. This tire changer helps reduce the need for workman’s compensation claims by taking the “grunt” work out of tire changing. It also can be used by less experienced tire changing technicians (after proper training) and it helps reduce damage to specialty aluminum and painted wheels.

74

Information:

Wheel Service

TECHNICAL DATA

WS-561-C

WS-561

Locking Range

Center Hole Clamping Range

13 - 27 in.

2,200 lb.

63 in.

34.25 in.

4 - 27.5 in.

13 - 27 in.

2,200 lb.

63 in.

34.25 in.

4 - 27.5 in.

Hydraulic Pump Motor

1.4 hp 220V 3ph

1.4 hp 220V 3ph

Gearbox Motor

1.4 hp 220V 3ph

1.4 hp 220V 3ph

Operating Pressure

1,740 psi 16900 N

1,740 psi

Max. Bead Break Cylinder Force Net Weight

1,896 lb.

16900 N 970 lb.

Dimensions (L X W X H)

67 x 42.25 x 62.25 in.

45.25-67 x 45.25-8 x 47.25 in.

Max. Wheel Weight Max. Wheel Diameter Max. Wheel Width

TECHNICAL DATA

COMPRESSOR

TECHNICAL DATA

GENERATOR

Capacity

26.5 gl 218 23 2

KWV

6.9 Diesel Water 14.25 hp

PSI CFM Retractable Hose Reels

Fuel Supply Cooling Power

110 V 1ph 20A 220 V 3ph 30A

47.25”

62.25”

Output

-8 25” 45. ”

67 ”

7” 45.25”- 6

” 42.25

Call for a FREE demo

75

HEAVY-DUTY WHEEL BALANCER MODEL WS-12890

Heavy-Duty balancer with unique features that allow for fast, easy and safe balancing of car, motorcycle and heavy-duty truck wheels.

Product Features 17 in. TFT monitor with simple and intuitive

control panel for greater functionality Integrated tire lift for easy handling of heavy tires Two speed rotation system, automatically

selected by wheel type 5 programs for truck wheels, 2 for

aluminum rims 11 programs for car wheels, 5 for

aluminum rims 5 programs for motorcyle wheels Special gauge to positioning the

adhesive weights in aluminum rims Static imbalance optimization program Multi-operator program Program for weights hidden behind

spokes (only car mode)

Information:

Wheel Service

TECHNICAL DATA

WS-12890

Rim diameter

6 in. - 40 in.

Rim width

1 in. - 24 in.

47 in.

Wheel diameter

Power supply

22 in.

440 lb.

10g Truck/1g car 100 rpm truck/200 rpm car 110 V - 1 ph - 60 Hz

Dimensions

80 in.(L) x 49 in.(W) x 74 in.(H)

Shipping Dimensions

38 in.(L) x 75 in.(W) x 48 in.(H)

Wheel width Max wheel weight Accuracy Rotation speed

Wheel Capacity

6 in. - 40 in.

47 in.

22 in.

Standard Accessories

Universal set of clamps for trucks Universal set of cones for light trucks 1 - Quick clamp hand wheel 1 - Measuring calipers 1 - Weight installation/removal tool 1 - Calibration weight

Optional Accessories

76

20 in. - 28 in. Dayton Adapter 24 in. - 28 in. Dayton Adapter 1 - Quick clamp hand wheel Cone for cars Ă˜ 120 - 172 mm 3 arm flange for light trucks Cone set for light duty Ă˜ 42 - 111.5 mm

HEAVY-DUTY WHEEL BALANCER

Information:

Wheel Service

TECHNICAL DATA

WS-12880

Rim diameter

6 in. - 40 in.

Rim width

1 in. - 24 in.

47 in.

Wheel diameter

Power supply

22 in.

440 lb.

10g Truck/1g car 100 rpm truck/200 rpm car 110 V - 1 ph - 60 Hz

Dimensions

80 in.(L) x 49 in.(W) x 74 in.(H)

Shipping Dimensions

38 in.(L) x 75 in.(W) x 48 in.(H)

Wheel width Max wheel weight Accuracy Rotation speed

Wheel Capacity

6 in. - 40 in.

47 in.

22 in.

Standard Accessories

Universal set of clamps for trucks Universal set of cones for light trucks 1 - Quick clamp hand wheel 1 - Measuring calipers 1 - Weight installation/removal tool 1 - Calibration weight

MODEL WS-12880

Heavy-Duty balancer with unique features that allow for fast, easy and safe balancing of car, motorcycle and heavy-duty truck wheels.

Product Features Double LED digital display Integrated tire lift for easy handling of

heavy tires Two speed rotation system, automatically

selected by the wheel type 5 programs for truck wheels, 2

for aluminum rims 11 programs for car wheels, 5

for aluminum rims 5 programs for motorcycle wheels Special gauge to position

adhesive weights on aluminum rims Static imbalance optimization program Program for weights hidden

behind spokes (only car mode)

Optional Accessories

20 in. - 28 in. Dayton Adapter 24 in. - 28 in. Dayton Adapter 1 - Quick clamp hand wheel Cone for cars Ă˜ 120 - 172 mm 3 arm flange for light trucks Cone set for light duty Ă˜ 42 - 111.5 mm 77

AUTOMATIC INFLATION SAFETY CAGE MODEL WS-35026

Tire Inflation Safety Cage A hidden danger lies in servicing large tires. Tires and multi-piece rims can explode during inflation, causing serious injury. Many factors can lead to a catastrophic tire explosion. The ARI-HETRA Tire Inflation Safety Cage can eliminate that danger while automatically inflating and regulating pressure. When using the ARI-HETRA system, a steel cage prevents wheel fragments from escaping in the event of an explosion.

“Walk-Away” Automatic Inflation Feature Time spent monitoring air pressure can now be spent on other tasks. ARI-HETRA’s tire inflator will inflate flat tires over the pressure required, up to 29 psi, then stop and deflate to desired pressure. If the tire pressure is a minimum of 4 psi, the unit will simply inflate to desired pressure and stop. That means you will have time to get yourself coffee – ARI-HETRA will take care of the inflation.

Features OSHA regulation 29-CFR part 1910.177 compliant.

Safe – prevents injury.

Pressure gauge and regulator system.

Pre-set deflation button.

Inflate tires up to 232 psi.

Maximum tire width: 26 in.

Maximum tire diameter: 50 in.

Easy to use.

Self-locking cage.

Made in the USA.

Easily inflate wheels up to 26 in. by 50 in.

78

Information:

Wheel Service

Information:

Wheel Service

AUTOMATIC TIRE INFLATION SAFETY CAGE MODEL WS-35026-70 Tire Inflation Safety Cage A hidden danger lies in servicing large tires. Tires and multi-piece rims can explode during inflation, causing serious injury. Many factors can lead to a catastrophic tire explosion. The ARI-HETRA Tire Inflation Safety Cage can eliminate danger while automatically inflating and regulating pressure. When using the ARI-HETRA system, a steel cage prevents wheel fragments from escaping in the event of an explosion.

“Walk-Away” Automatic Inflation Feature Time spent monitoring inflation air pressure can now be spent on other tasks. ARI-HETRA’s tire inflator will inflate flat tires over the pressure required, up to 29 psi, then stop and deflate to desired pressure. If the tire pressure is a minimum of 4 psi, the unit will simply inflate to desired pressure and stop.

Go ahead, get yourself a cup of coffee – ARI-HETRA will take care of the inflation.

Features OSHA regulation 29-CFR part 1910.177 compliant Safe – prevents injury Sliding access door allows easy hook-up.

Pressure gauge and regulator system Pre-set deflation button Inflate tires up to 232 psi Maximum tire width: 28 in.

Maximum tire diameter: 70 in.

Easy to use Locking cage Made in the USA

Easily inflate wheels up to 28 in. x 70 in.

79

TIRE INFLATION - HIGH CAPACITY TIRE CAGE MODEL WS-35026-FE

Wheel Service

Tire Inflation Safety Cage Finally, a solution to a long ignored problem - inflating oversized tires. A hidden danger lies in servicing large tires. Tires and multi-piece rims can explode during inflation, causing serious injury. Many factors can lead to a catastrophic tire explosion. The ARI-HETRA Tire Inflation Safety Cage can eliminate that danger while automatically inflating and regulating pressure. When using the ARI-HETRA system, a steel cage prevents wheel fragments from escaping in the event of an explosion.

“Walk-Away” Automatic Inflation Feature Time spent monitoring inflation air pressure can now be spent on other tasks. ARI-HETRA’s tire inflator will inflate flat tires over the pressure required, up to 29 psi, then stop and deflate to desired pressure. If the tire pressure is a minimum of 4 psi, the unit will simply inflate to desired pressure and stop. Go ahead, get yourself a cup of coffee – ARI-HETRA will take care of the inflation.

Features OSHA Regulation 29-CFR Part 1910.177 compliant.

Maximum tire width: 38 in.

Maximum tire diameter: 85 in.

Fully powered cage lift.

Safe – prevents injury.

Pressure gauge and regulator system.

Preset deflation button.

Inflate tires up to 232 psi.

Easy to use.

56 in.(H) x 91 in.(W) x 139.5 in.(L) Made in the USA.

80

Information:

Easily inflate wheels up to 86 in. x 38 in.

Information:

Wheel Service

HIGH-LIFT WHEEL DOLLY MODEL AH-20330 & AH-20440 Stop Straining Your Back ARI-HETRA’s High-Lift Wheel Dolly is the smart alternative. This product eliminates the need for mechanics to physically lift heavy wheels and tires, thereby reducing the risk of severe back injuries.

Simply position the wheel dolly next to the vehicle, then after jacking up the wheel dolly (or pressing a button on the air operated model) , align the lift arms to the tire, remove the lugs, secure the tire with the safety chain and release the pressure valve to lower the tire. Easily move the tire to any Wheel Balancer, Tire Changer or Inflation Device.

Intended Use For the installation and removal of single, tandem and duplex tires, and wheels on heavy-duty vehicles supported above ground level.

Features Heavy-duty lift arms with rollers allow rotation of wheels for easy alignment with bolt pattern.

Uses hand or foot lever to move lift platform.

Heavy-duty chain drive for lifting platform.

Arms are adjustable corner-to-corner and in reclining directions.

Safety chain provided to secure tires and wheels to the dolly.

Maneuverability is made easy with ball bearing caster wheels.

Model AH-20330 is manually operated with a hand/foot pump.

Model AH-20440 is air/hydraulic operated.

ARM ADJUSTMENT

OVERALL DIMENSIONS

LOW

LIFT HEIGHT HIGH

NARROW

WIDE

L

W

H

0 in

36 in

16 in

26 in

47 in

46 in

56 in

SHIPPING WEIGHT (lb.)

450

Model AH-20330 shown

Call for a FREE demo

81

BATTERY POWERED HIGH-LIFT WHEEL DOLLY MODEL AH-80330

Wheel Service

ARI-HETRA’s High-Lift Wheel Dolly is the smart alternative for mechanics to maneuver heavy wheels and tires, thereby reducing the risk of severe back injuries. Simply position the wheel dolly next to the vehicle and use the hydraulic pump to raise it to the desired height, then align the lift arms to the tire, remove the lugs, secure the tire with the safety chain and lower the tire. Easily move the tire to any Wheel Balancer, Tire Changer or Inflation Device.

Intended Use For the installation and removal of heavy-duty single, tandem or duplex tires, and wheels on vehicles supported above ground level.

Features 2,000 lb. tire capacity.

Heavy-duty lift arms with rollers allow rotation of wheels for easy alignment with bolt pattern.

Uses battery-operated hydraulic pump to move lift platform.

Maneuverability is easy with ball-bearing caster wheels.

“Quick-Charge” Battery Charger.

Heavy-duty chain drive for lifting platform.

Arms are adjustable corner-to-corner.

Maximum Tire Diameter: 53 in.

Arms tilt up and down.

Lift as high as 48 in.

Charges on 110V 1-phase.

Made in the USA.

Vented battery and pump enclosure for safe and quiet operation.

82

Information:

OVERSIZED BATTERY POWERED HIGH-LIFT WHEEL DOLLY Information:

MODEL AH-10330

Wheel Service ARI-HETRA’s High-Lift Wheel Dolly is the smart alternative. Simply position the wheel dolly next to the vehicle, then after lifting the wheel dolly, align the lift arms to the tire, remove the lugs, secure the tire with the safety chain and press the button on the tethered remote to lower the tire. Easily move the tire to any Wheel Balancer, Tire Changer or Inflation Device.

Intended Use For the installation and removal of heavy-duty single, tandem or duplex tires, and wheels on vehicles supported above ground level.

Features:

Center lift cylinder with foot pump and responsive foot release pedal.

Simple construction – robust construction.

Easy maneuverability with four heavy-duty wheels with locks.

Adjustable forks and tire securing strap.

Ball bearing lifting rollers.

3,000 lb. capacity.

Charges on 110V 1-phase.

LIFT HEIGHT

ARM ADJUSTMENT

ARM DIMENSIONS

LOW

HIGH

NARROW

WIDE

L

W

0 in

19 in

47 in

86 in

27 in

39 in

SHIPPING WEIGHT (lb.)

600

83

COUNTER-BALANCED WHEEL DOLLY MODEL AH-500-CB

Wheel Service

ARI-HETRA’s AH-500-CB Counter-Balanced Wheel Dolly is a smart alternative for mechanics to maneuver heavy wheels and tires, thereby reducing the risk of severe back injuries. The weight at the rear of the lift counteracts the weight of the lifted tire eliminating the need for any obstructions on the ground in front of the dolly. This design makes the AH-500-CB excellent for use with driveon lifts, pits, brake lathes, tire machines and other equipment in limited clearance areas. It is battery-operated, so you can safely and easily lift a tire without hoses and/or wires on the ground.

Additionally, the remote control allows you to operate the dolly in the most convenient and advantageous position.

Features Safety relief valve will not allow overloading Capacity 500 lb.

Tool Tray 10’ Remote Pendant Battery-Operated Overall Weight 745 lb.

Adjustable Carriage

LIFT HEIGHT

CARRIAGE WIDTH

OVERALL DIMENSIONS

LOW

HIGH

MIN

MAX

L

W

H

0 in

36 in

27 in

34 in

67 in

48 in

41.5 in

84

Information:

MAXIMUM CAPACITY (lb.)

OVERALL WEIGHT (lb.)

500

745

Information:

Wheel Service

10 TON CAPACITY PORTABLE AIR JACK MODEL WS-0910T Intended Use Garages/repair shops of truck, farm equipment, construction equipment and bus companies.

May be used in pairs.

Ideal for crowded conditions that require single-point contact.

Features Heavy-duty air valve provides fine control when lifting or lowering a load.

10 in. Extension tube and three support pins offer multiple lifting heights.

Unit easily maneuvered on two 6 in. diameter wheels.

Removable handle and 6 ft. air hose for remote safe positioning and operation.

CAPACITY

MIN. P.S.I. FOR RATED CAPACITY

LENGTH

HEIGHT EXTENDED

HEIGHT LOWERED

SHIPPING WEIGHT (lb.)

10 TON

200

57 in.

51 in.

18 in.

163

4.3 X 4.0 DP.

51“

18 “ 9.5 “

57 “

SHIPPING WEIGHT: 163 LB

85

MULTI-STEP AIR-HYDRAULIC FLOOR JACKS Information:

Our full line of jacks are built from superior materials with attention to high-quality and detail. This line features reliability testing and guaranteed efficiency. System components for all of our floor jacks are constructed using technologically advanced machinery designed to achieve the highest level of precision.

Wheel Service

Extensions are fabricated using high-quality steel with chrome coating on the external sliding parts, while the pneumatic parts are treated with an anti-corrosion process. The hydraulic circuit, built with holes inside the cylinder structure, guarantees a perfect seal against oil leaks. The rod scrapers prevent dust and other foreign matters from damaging the cylinder. The built-in safety valves eliminate accidental overloads and also prevent the load from dropping during an air-pressure loss.

A two-position lever on the handle controls the raising as well as the pneumatic vacuum descent of the jack. The low-profile frame makes it easy to position the jack, while the total tilting of the handle on the frame greatly reduces the jack’s dimensions, requiring less storage space.

Intended Use ARI-HETRA Air-Hydraulic Floor Jacks are suitable for partially lifting a heavy-duty vehicle to allow for the removal/replacement of one wheel at a time.

Features

Wheeled-base for easy handling.

Safety device to prevent load from descending if compressed air-supply fails.

All controls are conveniently located on handlebar.

Three-step lifting cylinder allows low entry height for maximum vehicle flexibility.

Simulated lifetime fatigue testing (50-100 lifting cycles per day for over 10 years).

WS-02236

WS-02236 Three-Step Air-Hydraulic Jack WORKING AIR PRESSURE

STANDARD EXTENSIONS

DIMENSIONS

SHIPPING WEIGHT (lb.)

1

CAPACITY (lb.)

102,300

2

61,600

143 psi

PL50/PL100

87 in. x 13 in. x 13 in.

194

3

33,000

STEP

Min Height = 7 in

86

ARI-HETRA carries a full line of air-hydraulic telescoping floor jacks.

Max Height = 15.75 in

ARI-HETRA offers a full line of

Lifting Systems.

MULTI-STEP AIR-HYDRAULIC FLOOR JACKS Information:

Wheel Service

WS-02124 Four-Step Air-Hydraulic Jack

1

CAPACITY (lb.)

168,300

2

99,000

3

60,500

4

31,900

STEP

WORKING AIR PRESSURE

STANDARD EXTENSIONS

DIMENSIONS

SHIPPING WEIGHT (lb.)

143 psi

PL50/PL100

53 in. x 14 in. x 12 in.

231

Min Height = 4.75 in.

Max Height = 11.5 in.

WS-02415

Four-Step Air-Hydraulic Jack 1

CAPACITY (lb.)

168,300

2

99,000

3

60,500

4

31,900

STEP

WORKING AIR PRESSURE

STANDARD EXTENSIONS

SHIPPING DIMENSIONS

SHIPPING WEIGHT (lb.)

143 psi

PL50/PL100

52 in. x 13 in. x 13 in.

194

Min Height = 7 in. Max Height = 19 in.

PL100

WS-02300 Two-Step Air-Hydraulic Jack 1

CAPACITY (lb.)

66,000

2

33,000

STEP

WORKING AIR PRESSURE

STANDARD EXTENSIONS

DIMENSIONS

SHIPPING WEIGHT (lb.)

143 psi

PL50/PL100

71 in x 13 in x 20 in

137

Min Height = 11.75 in.

Max Height = 24.5 in.

WS-02215 Two-Step Air-Hydraulic Jack

14 in Extension PL50 ARI-HETRA Standard Extensions: The 2 in.

PL50 and the 4 in. PL100. Also shown is the optional 14 in. extension.

Call for a FREE demo

1

CAPACITY (lb.)

66,000

2

33,000

STEP

WORKING AIR PRESSURE

STANDARD EXTENSIONS

DIMENSIONS

SHIPPING WEIGHT (lb.)

143 psi

PL50/PL100

71 in. x 13 in. x 13 in.

110

Min Height = 6.25 in.

Max Height = 13.5 in.

87

MULTI-STEP AIR-HYDRAULIC FLOOR JACKS Information:

Wheel Service

WS-12102 Two-Step Air-Hydraulic Jack STEP

CAPACITY (lb.)

1

220,000

2

132,000

LED LIGHT

WORKING AIR PRESSURE

STANDARD EXTENSIONS

DIMENSIONS

SHIPPING WEIGHT (lb.)

143 psi

PL50/PL100

39 in. x 17 in. x 63”

340

Min Height = 12 in.

Max Height = 24 in.

4-LED “LIGHT-UP” system illuminates lifting points

WS-12101 Single-Step Air-Hydraulic Jack STEP

CAPACITY (lb.)

WORKING AIR PRESSURE

STANDARD EXTENSIONS

DIMENSIONS

SHIPPING WEIGHT (lb.)

1

220,000

143 psi

PL50/PL100

39” x 17” x 63”

330

Min Height = 12 in.

88

LED LIGHT

Max Height = 18 in.

PORTABLE HYDRAULIC FORK-LIFT TRUCK JACK Compact and Capable ARI-HETRA’s Portable Hydraulic Fork-Lift Truck Jack is a small, lightweight unit but provides impressive lifting force. Extensions and the additional bracket allow for a variety of lifting positions - directly with the piston or with side bracket. As a versatile unit, the portable jack can be operated using a hand pump when no air source is available. With this application, the portable jack is usable anywhere, with no need to go to specific maintenance areas for servicing a vehicle. Or, it can be operated using an air-hydraulic pump powered by compressed air which allows the jack to be operated very quickly. Once the required height is reached, the hydraulic pump unit can be disconnected and used for service on another vehicle since the cylinder will hold its position.

5.4”

2.5”

Ø3” 8 TON

1.2”

6.3”

5 TON 5”

Wheel Service

MODEL WS-08580

11.45”

Information:

2.7”

4.8”

6.3”

The compact size of the truck jack allows for easy access to low-sitting vehicles.

5.3” 8.25”

Features

ARI-HETRA offers a full line of Lifting Systems.

Compact and built with superior, top-quality materials.

The jack features a convenient handle for easier transport and maneuvering.

The load is lowered by hand by means of a valve, which also allows control of the descent speed.

Hand or air operated.

Lift vehicles with ground clearance as low as 1.25 in.

LIFTING WIDTH

CAPACITY (lb)

WORKING AIR PRESSURE

MAX CYLINDER STROKE

ACCESSORIES (SUPPLIED)

OPTIONAL ACCESSORIES

NET WEIGHT (lb)

PISTON TOP SIDE BRACKET

18,000 11,000

6,526 PSI

6 in.

PL50/PL100/ SL30

P940/P802/ HP 1/4

40

89

ON-VEHICLE DISC BRAKE LATHE MODEL WS-BL44 & WS-BL44-T

Information:

ARI-HETRA’s Model WS-BL44 Rotor Brake Lathe is designed for the rigor of today’s heavy-duty trucks, buses and light commercial vehicles. This brake lathe operates directly on the vehicle without removing the rotor from the hub, saving you time and producing a truly aligned rotor. By turning rotors on the vehicle, you are able to accurately align to a real world situation.

This dramatically eliminates manufacturing imperfections, assembly mistakes or machining inaccuracies, inherent in traditional off-the-vehicle brake lathes.

Resurfacing in this manner provides a perfect geometric match between the pads and rotor, allowing brake systems to operate at optimum efficiency.

Additionally, the Model WS-BL44-T is now available at an ergonomic working height, allowing you to easily work on vehicles that are lifted in the air.

Wheel Service Technical Data Maximum Rotor Diameter

19.5 in. (500 mm)

Minimum Rotor Diameter

4.75 in. (120 mm)

Maximum Rotor Thickness

2.5 in. (65 mm)

Feed Speed

0-0.3 mm/rev

Spindle Speed Revolutions

35 - 90 rpm

Motor Power

2 hp

Overall Dimensions (l x w x h) 33.5 in. x 25.5 in. x 41 in.

Weight

511 lb.

Voltage - Hz - Phase

220 V - 60 Hz - 1-phase

Model WS-BL44-T Lift Height Model

Accessories Standard Accessories (included)

Otional Accessories (extra)

1. Adaptor ring AA0251 2. Wrench set

AA0251 10 x 335 mm

AA0056 AA0061 6 x 170 mm 8 x 275 mm

AA0265 6 x 205 mm

AA0275 6 x 245 mm

AA0077 5 x 203 mm

AA0078 5 x 130 mm

ARI-HETRA offers a full line of 90

Exhaust Extraction Equipment.

BRAKE DISCS, DRUMS & FLYWHEEL LATHE MODEL WS-BL1500

Information:

Wheel Service

ARI-HETRA’s Model WS-BL1500 Brake Lathe is designed to turn drums, rotors and flywheels of trucks, buses and light commercial vehicles. This lathe makes it possible to turn heavy-duty truck drums with dual-wheels and hubs still mounted. The lathe is equipped with a stout 50 mm diameter arbor shaft so no outboard support is necessary. The lathe works with a digital rheostat which allows continuous variation of the spindle’s revolutions. The speed of the spindle’s revolution can be adjusted at any time to react to the condition of the drum, rotor surface or the vibration level.

With this feature, cutting time can be optimized without negative effects on the surface of the drum or rotor. This versatile machine can handle a number of different turning jobs from discs to drums. ARI-HETRA also offers an optional cutting tool for flywheels.

Technical Data Spindle Revolutions

35 - 50 - 70 - 100 rpm

Accessories

Feed Speed

0.05 - 0.4 mm/rev

Standard Accessories (included)

Min/Max Drum Turning Dia.

6 in. - 46 in.

Min/Max Rotor Turning Dia.

0 in. - 33.5 in.

Motor Power with Rheostat

1.3 - 2.4 hp

Table Motor Power

.5 hp

Overall Dimensions (l x w x h)

77.5 in. x 55 in. x 57 in.

Weight

1,441 lb.

Voltage - Hz - Phase

220 V - 60 Hz - 3-phase

Call for a FREE demo

1.

2.

3.

4.

5.

6.

Tool holder bar support Tool holder bar for large drums Heavy-duty drum turning tool Truck drum vibration dampener Arbor support arm Safety cage

Optional Accessories (extra) 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

AP50 - Truck drum adaptor set - ∅ 50 mm arbor TDL1500 - Car and light truck adaptor set - ∅ 30 mm arbor TR0995 - Adjustable twin cutter tool assembly UT0015 - Large drum insert tool holder UT0021 - Large drum turning tool UT0001 - Small drum turning tool UT0012 - Replacement insert for UT0015 (10 pcs.)

PV0060 - Drum/Flywheel grinder AC1188 - Brake drum universal adaptor plate PV1250 - Complete wheel lifting frame (bolts to shop floor) AC0180/3 - Brake drum adaptor plates

91

BRAKE DISCS, DRUMS & FLYWHEEL LATHE MODEL WS-BL2000

ARI-HETRA’s Model WS-BL2000 Brake Lathe produces an evenly cut drum and is based on the latest brake lathe technology for heavy-duty equipment. The extra-large 60 mm diameter arbor and its oversized spindle damp all vibrations allowing it to work without the use of a tailstock to make the mounting procedure easier and quicker - even on dual wheels attached to the drum. Advanced functions include powered in/out and left/right table movement, continuous or intermittent variable feed in both working directions (to avoid a spiral effect) and spindle rotation controlled by an inverter which, in addition to giving a variable spindle speed, controls acceleration and deceleration - a useful function when turning something of heavy weight. Furthermore, the machine allows turning and grinding of tapered flywheel surfaces thanks to the special cutting adaptor. The adjustable travel end stops on both tables, the well-located and easy-to-use control panel and the tilt up safety guard are further elements that make the WS-BL2000 practical, reliable and safe.

Information:

Wheel Service

Accessories Standard Accessories (included) 1.

2.

3.

4.

5.

6.

7.

92

Rotor turning kit for trucks Adapter set for car and light truck rotors and drums Spacer kit and centering cones for truck drums Work light Safety cage Chip tray Truck drum silencer band

Optional Accessories (extra) 1. BLA-PVC060 - Drum and flywheel grinder 2. BLA-AC1188 - Universal adapter plate for drum fast mounting of heady duty drums 3. BLA-PV2120 - Arm crane for drum assisted lifting 4. BLA-0065 - Chain block for arm crane 5. BLA-TR2250 - Dust collecting system 6. BLA-PV0167 - Drum lifting device 7. BLA-PV0165 - Dual wheel rising pliers 8. BLA-PV0097 - Silencer for rotors

Technical Data Spindle Revolutions

10 - 120 rpm

Min/Max Drum Turning Dia.

9.4 in. - 33.5 in.

Min/Max Disc Turning Dia.

0 in. - 20 in.

Spindle Motor Power

2.5 hp

Table Motor Power

60 watt x 2

Overall Dimensions (l x w x h)

73.5 in. x 55 in. x 58 in.

Weight

1,697 lb.

Voltage - Hz - Phase

220 V - 60 Hz - 3-phase

Wheel Service Equipment

ARI-HETRA on Contract

Tire Changers

ARI-HETRA has the equipment you need to service heavy-duty on and off-road tires.

ARI-HETRA is the Federal, State and Local Government’s premiere provider of heavy-duty maintenance equipment including lifting systems, exhaust extraction systems and wheel service equipment. ARI-HETRA has partnered with many entities to establish pre-competed contract pricing on our full line of equipment. These contract vehicles will help simplify and expedite the procurement process for all Federal, State and Local Government Purchasing Agencies.

On-Vehicle Brake Lathes GS-07F-291AA

U.S. General Services Administration Contract Number: GS-07F-291AA

All federal agencies and activities in the Executive, Legislative and Judicial branches, the Government of the District of Columbia, mixed ownership government corporations, government contractors and other activities and organizations duly authorized by statute or regulations are eligible.

Purchase directly from DoD EMALL! https://dod-emall.dla.mi The DoD EMALL contract is a web-based e-Commerce site, that allows DoD agencies and other Federal customers to access all ARI-HETRA equipment for purchase from the convenience of your computer 24/7.

California Multiple Award Schedule Contract Number: 4-13-56-0053A All California state and local government agencies, school districts, utilities and other entities authorized to expend public funds are eligible to participate in the CMAS program.

Western States Contracting Alliance Contract Number: 06405 All State Agencies, Political Subdivisions, Qualified Non-Profit Organizations, Materials Management Centers and Participating Institutions of Higher Education may utilize contract if their state has executed a Participating Addendum.

Houston-Galveston Area Council Contract Number: FL03-11

Floor Jacks Call an ARI-HETRA Regional Sales Manager to learn how our Wheel Service Equipment can keep you rolling.

Contract is available nationwide to all states, state agencies and local governments, including non-profit providing governmental services. Eligible for use upon execution of simple Interlocal Contract.

New York State Contract Contract Number: PC64741 Available for use by New York state agencies, political subdivisions and other organizations authorized by law to purchase from State contracts.

CALL 800-562-3250

Wheel Dollies

for more information on your specific contract

Tire Cages

Wheel Balancers

ARI-HETRA lifting systems

HEAVY-DUTY MAINTENANCE EQUIPMENT CATALOG

exhaust systems wheel service

2015

NORTH AMERICAN EDITION

OUTSIDE USA (703) 359-6265 FAX (703) 359-6405 12775 Randolph Ridge Lane, Manassas, VA 20109 © 2015 Automotive Resources, Inc. SL0215

www.ari-hetra.com