Category Description Part NumberImage
ENGINE6.0L OIL RAIL BALL TUBE 60-1033
INJECTOR
CRI SOLENOID DIVIDER REPAIR TAB Cummins Solenoid Plastic Divider
INJECTORF00RJ01085 - CRI SOLENOID NUT
ADSCRITAB
ADSF00RJ01085
INJECTORINJECTOR RETENTION NUT
OIL PUMPBILLET 6.0L HPOP HOUSING
ADS2-433-462-008
4C3Z-9A543-1
PUMP1/4" NPT TO 14mm BANJO BOLT BLOCK 12479 & ADS10091
PUMP16320 STANADYNE PILOT TUBE
ADS16320
PUMP16323 STANADYNE PILOT TUBE ADS16323
PUMPAMBAC TAG
PUMPAmerican Bosch PSB plunger guide - GU903 ADSGU903
PUMPBOSCH CASE A PUMP THR LEVER ADS1-421-900-015
PUMP BOSCH TAG-19.091mm x 36.595mm, 2 holes at 2.3mm, Hole spacing 31.73mm
PUMPFuel adaptor M16x1.5 TO 14mm BANJO BLOCKADS10092
PUMPLEVER FOR GB-3933104
564555
PUMPSTAINLESS DELIVERY VALVE HOLDERADS10102
PUMPSTANADYNE DRIVE SHAFT
ADS10224
PUMPSTANADYNE DRIVE SHAFT
ADS10261
PUMPSTANADYNE DRIVE SHAFT
ADS10266
PUMPSTANADYNE DRIVE SHAFT
ADS10267
PUMPSTANADYNE DRIVE SHAFT
ADS16444
PUMPSTANADYNE DRIVE SHAFT
ADS16863
PUMPSTANADYNE DRIVE SHAFT
ADS17071
PUMPSTANADYNE DRIVE SHAFT
ADS18815
PUMPSTANADYNE DRIVE SHAFT
ADS20335
PUMPSTANADYNE DRIVE SHAFT
ADS20361
PUMPSTANADYNE
PUMPSTANADYNE DRIVE SHAFT - 10236
ADS10236
PUMP18953 STANADYNE PILOT TUBE
ADS18953
PUMP23382 STANADYNE PILOT TUBE
ADS23382
PUMP32980 STANADYNE PILOT TUBE
ADS32980
PUMPSTANADYNE DRIVE SHAFT - 10259
TEST 9-683-238-913 - RACK EXTENSION TO MEASURE RACK TRAVEL ON P-PUMPS
TEST
BACKLEAK ADAPTER FOR 0445124014 CRI Sleeve for New Holland 12.7/12.9 Injectors. BACKLEAK ADAPTER ASSEMBLY WITH O-RING AND FITTING
ADS10259
ADS9-683-238-913
0445124014-C
TESTFuel Fitting (CRI adaptor from sleeve to injection line)NTA5501
TESTFUELING SLEEVE - HK1041 (CRI test sleeve)NTA5410
TEST
TEST
TEST
FUELING SLEEVE A14i FOR 1-685-720-334 CRI 205 RETURN AND INLET SLEEVE
ADSA14i
FUELING SLEEVE FOR 0-445-120-424 INJECTOR 205 INLET AND RETURN SLEEVE FOR DUETZ INJECTOR 41003
FUELING SLEEVE FOR JD 8.1L CRI TO FIT EPS205 STAND. BACKLEAK ADAPTER ASSEMBLY WITH O-RING AND FITTING
ADSHK1066-C
TEST
FUELING SLEEVE FOR JD 9.0L CRI TO FIT EPS205 STAND. BACKLEAK ADAPTER ASSEMBLY WITH O-RING AND FITTING
ADSHK968-C
Category Description Part NumberImage
TEST HOLDING SLEEVE FOR 0-445-120-092 CRI 205 IVECO 8.7, 9, 12.9 INJECTOR SLEEVE
TEST HOLDING SLEEVE FOR 0-986-435-597 CRI 205 CUMMINS 4.5, 6.7 INJECTOR SLEEVE
TEST INJECTOR BACKLEAK ADAPTER A3e FOR 1-685720-344 CRI 205 RETURN FUEL SLEEVE
TEST M16x1.5 INLET ADAPTER NUT FOR EPS205 Supply line fitting adaptor to injector inlet
TEST NTA5305 - BACK LEAK ADAPTER FITTING TYPE 5 (CRI Return Connector) HARTRIDGE
TEST NTA5656 - CLAMP BLOCK (CRI Hold Down) DENSO INJECTOR HARTRIDGE STAND
TEST TEST STAND DRIVE HUB FOR 2-416-434-117 P7100 HUB - JD UNEVEN SPACED 4 BOLT
TOOL 5/8" 8 point socket adapter NOZZLE NUT SOCKET ADAPTOR FOR 3.0L VM MOTORI
TOOLNOZZLE PRESS PLATE FOR 6.7L CRI41008
TOOL SOLENOID NUT TORQUE PLATE FOR 0-986-435597 CRI CUMMINS 4.5, 6.7
TOOL SOLENOID NUT WRENCH - with HANDLE FOR 0986-610-384 41010
TOOLInjector Brace to Loosen Nozzle Nut FOR 6.7L CRI41013
TOOLInjector Brace to Loosen Nozzle Nut FOR 8.3L CRI41014
TOOLNozzel Press Plate FOR 8.3L CRI
TOOLFueling Sleeve 1-685-720-297 (A1i)
TOOLFueling Sleeve 1-685-720-300 (A5i)
TOOLFueling Sleeve 1-685-720-318 (A6i)
TOOL Fueling Sleeve for JD RE529149 injector (AP51900, 095000-6480,AP51800, RE546776, RE528407, SE501947)
TOOL JOHN DEERE injector holder EUI FUEL INLET AND RETURN SLEEVE FOR MAKTEST STAND
TOOLBackleak Adapter 95000-0541
