SPN (Swimming Pool News) August 2025 by Aqua Publishing Ltd

This is no ordinary pool cover, it has huge advantages over traditional PVC slatted covers in terms of insulation properties with average thermal conductivity of= 0.0821 W/(mK) or a u value of 4.85.

The profile structures are made from expanded PVC-foam, coextruded with polyurethane. The profile exterior is high density PVC, which gives a perfectly smooth surface to prevent any algae formation either above or below the water level.

Available in five colours, Covrex® covers comply with the French safety standard NF P 90308 Version 2006, probably the strictest standard in the market.

They provide excellent resistance to weather and UV which makes them suitable for use all year round and come with an amazing standard 5 year warranty.

Covrex® is the future; so get ahead of your competitors before it’s too late!

What a difference a 12 months makes! At this stage last year, it was a case of “what summer?”, whereas this year it’s been the complete opposite… arguably too much summer if there is such a thing! Certainly too much when it comes to a lack of rain, but beyond that (and the obvious issues it brings), we couldn't have wanted for better weather for our industry. It’s just such a shame that for a number of reasons – which let’s be honest, are mainly ﬁnancial/economy related – it sadly hasn’t been the stellar season it could have been. Don’t get me wrong, it’s been far from bad, but just not as good as it could have been, especially when compared to the warmer seasons gone by.

For those lucky enough to own a wet leisure product, or for those who operate them, the weather has ensured more use of pools, spas, and more over recent months. So water-based hygiene has very much been at the forefront of people’s minds. Somewhat handily, inside, we take a look at some of the current solutions that are keeping the water clean whilst minimising or eliminating chlorine use completely. In addition to this, we also take our annual look at just some of the laboursaving products that are making the task of testing water in pools and spas a more simple, quick and accurate task. Still on the subject of clean and safe water, well, more so clean and safe environments actually, we’ve a piece where STA Pool Plant Tutor Chris Bateman delves into the science of bioﬁlms – how they develop in aquatic facilities, the risks they

pose to bathers, and the best strategies for prevention and control.

Dehumidification is also featured as we take a closer look at some of the environmental solutions that are able to provide a breath of fresh air to indoor pool and spa spaces.The appeal of stainless steel is also focused on again as we look at pools, spas and a number of accessories that are utilising the benefits of this timeless and elegant material that offers flexibility in its use along with long term durability too. Talking of flexibility, moving floors also makes a return this issue. Whilst clearly somewhat of an investment, these cleverly engineered products offer some fantastic benefits, particularly when it comes to freeing up space for alternative uses in both domestic and commercial settings. Completing our main features, swim spas are also covered as we take a look at a handful of models that are currently available for both families and more serious swimmers.

Inside, you’ll also ﬁnd a showcase of a project that features a number of Waterco products, plus we taker a closer look at an exciting new partnership that is bringing Sterck one-piece pools to the UK.

If that wasn’t enough, we also give space to a joint statement made by a coalition of partners aiming to ensure that grassroots funding announced in the Spending Review reaches our pools.

As ever, there’s also useful information from the BSPF, SPATA and BISHTA along with all the British entries shortlisted for the 2025 European Pool & Spa Awards hosted by EUSA. The winners will be announced later this year at the Piscina Barcelona exhibition in Spain.

Finally, we’ve got our round up of all the latest industry, product, people and eco news from both here in the UK and from further aﬁeld.

So, with a broad mix of subjects covered in this latest issue of SPN, hopefully we’ve provided a bit of something for everyone and I hope you ﬁnd some time to enjoy it.

Jon Wadeson –Editor

This

READER SERVICES

DIGITAL EDITION

Read this and previous editions online at www.swimmingpoolnews.co.uk

BUYERS GUIDE

For suppliers of products and services in the pool, spa and sauna market turn to page 76

SUBSCRIPTIONS

Ensure you receive a regular copy of SPN (Swimming Pool News). Subscribe online today at www.aqua-publishing.co.uk

FORWARD FEATURES

For our forward features, please visit our website at www.swimmingpoolnews.co.uk

Tiled spas and swim spas

Hot tubs – high-end models above £10,000

Enclosures

With Five Months Still To Go, SPATEX 2026 Is Now Almost Sold

The much-anticipated 30th anniversary edition of SPATEX –which takes place from Tuesday 3 to Thursday 5 February 2026 at the Coventry Building Society Arena – is shaping up to be a record breaker. According to its organisers, the UK’s dedicated water leisure show has never sold out of exhibition space so quickly and with just over ﬁve months until the event, incredibly, the remaining handful of stands are almost gone, and that’s despite increasing the show’s ﬂoor space!

“With its three-decade track record, SPATEX has proved itself as ﬁrst for water leisure. Free, and open to all to attend, the show is an annual invitation to view the very latest innovations and trends and take advantage of the host of special show discounts exclusive to visitors.

Coupled with a free double seminar programme, SPATEX offers the UK’s most authoritative and comprehensive guidance in the management and provision of swimming pools, wellness spas, hot tubs, play features and hydrotherapy pools. All ISPE workshops in Arena 1 offer the visitor CPD accreditation,” said Show Organisr Michele Bridle. Building on the success of

Out!

SPATEX 2025’s Pool Plant Theatre, the anniversary edition sees the introduction of an exciting new initiative called ‘The Industry Hub’. Esteemed industry associations –Swimming Teachers’ Association (STA), Royal Life Saving Society (RLSS), Pool Water Treatment Advisory Group (PWTAG), Institute of Swimming (IoS) and, of course, the British Swimming Pool Federation’s SPATA (Swimming Pool & Allied Trades Association) and BISHTA (British & Irish Spa & Hot Tub Association) – will all be conveniently situated on one large stand (adjacent to seminar Arena 2). Representatives from each association will be on hand to offer visitors a plethora of information and guidance speciﬁc to each of their specialisms.

The Legionella Control Association (LCA) and Water Management Society (WMSoc) will also be out in force at the show, with speakers from both associations giving keynote talks in the seminar arenas.

SPATEX

01264 358558

www.spatex.co.uk

Planning Submitted For New Scottish Leisure Centre

Holmes Miller has submitted a planning application for a newbuild leisure centre in Larkhall, South Lanarkshire – a highly sustainable, community-focused facility designed to replace the existing centre with a modern, low-energy alternative.

The project is being delivered on behalf of South Lanarkshire Council, in collaboration with BAM Construction and hub South West. It will provide a long-overdue upgrade to the town’s current leisure provision, which no longer meets the needs of the growing population.

The proposed new centre will include a swimming pool, gym, ﬂexible studios, community rooms and a bright, welcoming break space at its heart – all designed with accessibility, daylight and sustainability in mind.

A key feature of the project is its strong environmental performance. The building will be delivered using a Cross Laminated Timber (CLT) structure and designed to meet Passivhaus principles – signiﬁcantly reducing both operational and embodied carbon. These measures support the council’s wider ambitions for delivering efﬁcient, future-proofed public buildings.

Yida Zhou, Project Architect at Holmes Miller, said: “This building is designed to be simple, calm and intuitive – a healthy environment that supports both active lifestyles and community wellbeing. The use of timber and high-performance building fabric reﬂects our commitment to delivering climate-conscious civic architecture.”

Craig Heap, Project Director, added: “We’re proud to be working closely with South Lanarkshire Council, BAM and hub South West on this important community facility. The strength of the design reﬂects the shared ambition across the team to create a low-carbon, accessible building that will serve Larkhall for generations to come.”

Subject to planning approval, construction is anticipated to commence in summer 2026.

Fairlocks Opens New In-house Facility

Oxford-based Fairlocks Pool Products has undergone an exciting transformation and are proud to announce the launch of a new, fully equipped Training & Sales Centre.

Later in the year invitations will be sent to professionals in the swimming pool trade to visit the facility, explore the company’s innovative product range – including core products such as their LPW and Flexline onepiece pools and premium Covrex® automatic cover systems – and engage with an expert team in order to beneﬁt from the many years’ experience and knowledge on offer. Other products also being showcased include Water Tec LED lights, HIDE Access covers and Puriq UV Systems.

The new centre also incorporates a stateof-the-art training facility dedicated to the company’s one-piece pool range of LPW and

Flexline pools, plus the unique range of Covrex® pool cover systems now produced by the T&A group.

Engineers will beneﬁt from in-depth sessions on the seven Covrex® conﬁgurations, including installation, programming and diagnostics. Training will include a combination of presentations and hands-on demonstrations.

Each training will be designed to be informative and engaging, showcasing the breadth and quality of the Fairlocks product portfolio.

For those unable to attend in person, the company will also be offering remote training via video conferencing.

Fairlocks Pool Products

01869 934333

www.fairlocks.co.uk

Recotherm Launch New Website

To celebrate their 40th anniversary, Recotherm have launched a new website and video which showcases their innovation, extensive industry knowledge and commitment to sustainability.

Clearly signposted market and location speciﬁc pages and FAQs make it easy to ﬁnd relevant information, what’s more, the new website boasts an impressive client list, helpful case studies and informative articles to aid the sales process.

The Recotherm team have also invested in a lifestyle video to help end customers understand the unique environment that their units provide.

Commercial Director, Melanie Killen, stated: “Our units are large grey boxes, and without actually stepping into a pool hall that’s serviced by one of our units it’s difﬁcult to explain the beneﬁts they deliver.”

For pool contractors, this provides an excellent sales tool, helping them sell the intangible beneﬁts to their customers.

Despite the level of detail included in the website, the Recotherm team are keen to point out that they’d always encourage contractors get in touch to discuss queries or challenges when specifying an AHU.

Technical Manager, Mark Mellings, is particularly keen on solving complex ventilation issues with bespoke programming, providing customers with the flexibility they require and optimising the energy-efficiency of the units. He said: “Our customers range from domestic pools with bi-fold doors, rising floors and pool covers to large commercial projects which can require very specific programmes to deal with spectator areas and peak usage times which require the unit to match pool activity levels.”

The new website and video build on the brand refresh that took place in the last half of 2024 and ﬁrmly positions them as one of the go-to suppliers of air handling units to the M&E and pool contractor markets.

Recotherm 01527 894533

www.recotherm.co.uk

Stepnell Hits Structural Milestone At Lichfield Leisure Development

Complete construction partner Stepnell has successfully completed the main structural phase of the new £11.3m leisure centre at Stychbrook Park, Lichﬁeld, marking a signiﬁcant milestone in the project.

The community facility, which is set to open in December 2025, has held its ‘topping out’ ceremony, with Double Olympic gold medallist Rebecca Adlington OBE marking the occasion.

A highlight of the centre, which replaces the ageing Friary Grange Sports Centre, will be its 25-metre, six-lane swimming pool.

The project was procured through the Procure Partnerships Framework, with Stepnell appointed by Lichﬁeld District Council as the complete design and build construction partner.

Tom Wakeford, Managing Director at Stepnell, said: “We are incredibly proud to be delivering the Lichﬁeld leisure centre. It’s fantastic to see the vision for this stateof-the-art facility truly coming together.

“Our team has worked diligently to ensure the project progresses well, and we’re excited for the community to beneﬁt from this fantastic new centre.”

Stepnell has been actively engaging with the local community throughout the build, including collaborations with students from Chase Terrace Academy and sourcing materials from local suppliers to support the regional economy.

The team has maintained ongoing communication with the local community throughout the build, engaging in monthly newsletters, drop-in sessions and dedicated site noticeboards.

Adrian Turner, Director of Client Success at ReCreation, the specialist leisure consultancy guiding the development, added: “The project is progressing superbly and remains on schedule and budget. We are proud to support Lichﬁeld District Council in delivering a modern facility designed to inspire and support community health and wellbeing for years to come.”

Alongside Stepnell, the project team includes Box Architects, civil and structural engineers Adept, and building services consultants BWB Consulting.

New Era for Waterstream With Launch Of Updated Facilities

Waterstream – the company behind both the EVi Pools and Compass Pools brands in the UK – and has opened a new headquarters, featuring purpose-built ofﬁce space, increased warehouse footprint, and a custom-designed production facility in Coolham, West Sussex. This marks a signiﬁcant milestone in the business’ continued growth and commitment to innovation in the luxury pool industry.

The fully redesigned office space offers a stylish, contemporary aesthetic that reflects the brand’s dedication to luxury design, using the highest quality materials and finishes. Alongside this, the new

Excitement Builds As Operator Announced For Portsmouth Lido Project

At the end of July, and in the week that Hilsea Lido celebrated its 90th anniversary, another major milestone has been reached as Portsmouth City Council announced the team behind Sea Lanes Brighton as the preferred operator.

The team is a passionate group of local businesses and open-water swimming enthusiasts who will partner with South Downs Leisure to steward the regeneration of Hilsea Lido. Together, their shared vision is to create a ﬁnancially and environmentally sustainable, inclusive and accessible leisure destination for all to enjoy.

Portsmouth’s cherished Hilsea Lido has been undergoing a £7.6m renovation, led by the council and funded by the UK Government. Extensive work is currently underway to fully renovate the pool, filtration equipment, and surrounding areas. The announcement of Sea Lanes as the preferred operator follows a market exercise that took place in late 2024.

The Sea Lanes team plan to bring their signiﬁcant expertise to Hilsea Lido and will begin the regeneration with the introduction of a sauna, along with a popup food and beverage offer to complement the unheated pool. They will also operate the splash pool next to the lido, unifying both sides of the historic site for the ﬁrst time in many years.

dedicated pool ﬁt out and plant room workshop and production facility has been custom designed to house the production of the company’s signature Pool Pods. These pre-made plant rooms are compact, sleek and simple, containing all essential pool equipment for swimming pool maintenance.

The production workshop’s specialist design draws on the principles of luxury, quality and precision, with a distinctive connection to the world of Formula 1. Featuring equipment designed by the same team behind McLaren’s F1 facilities, the space merges high-end engineering with reﬁned aesthetics, emphasising the company’s commitment to excellence in both high-end design and manufacturing.

This signiﬁcant investment will enable the company to streamline its operations and expand its market reach, providing clients with unparalleled, high-quality products and services.

Sustainability played a central role in the development of the new facilities. The site features a range of environmentally responsible technologies, including energy-efﬁcient systems designed to minimise environmental impact and make it fully carbon neutral.

Alex Kemsley, Managing Director of Waterstream, explained: “We’re proud to reveal our newly enhanced headquarters and stateof-the-art production facility. These dynamic spaces reflect our commitment to quality, innovation and the service we deliver to our valued clients. It’s an exciting moment for our team and a meaningful step forward in continuing to deliver exceptional experiences for swimming pool owners.”

Waterstream

01444 400621

www.waterstream.co.uk

Sustainable Mapei System Used At

World-leading Leisure Centre

A Mapei tiling system has been used to complete a surface installation project at Spelthorne’s Eclipse Leisure Centre – one of the world’s most advanced energyefﬁcient leisure centres. The installation, carried out by Global Ceramic Tiling for Willmott Dixon, spanned the swimming pool, wellness areas and changing rooms. It features a variety of porcelain tiles, along with Mapei EMICODE: EC1 Plus certiﬁed sustainable formulations and products from Mapei Zero line, with CO2 emissions fully offset in the entire life cycle.

Designed by GT3 Architects and constructed by Willmott Dixon, the Eclipse Leisure Centre seeks to be one of the UK's largest wet and dry leisure centres to achieve Passivhaus, and the ﬁrst in London. Facilities include a low-chemical 25m main pool, learner pool and splash pad, spa and sports facilities. The club spans over 100,000ft2 and aims to consume up to

60% less energy compared with a standard new building.

The tile installation included swimming pool surrounds, wellness areas and wet and dry changing areas and featured 300 x 300mm and 300 x 600mm porcelain tiles, supplied by Spec Tile. During the installation, surfaces were prepared by Advance Screeding. Mapei Topcem – a special fast drying hydraulic screed binder –was applied to form a complex set of falls within the changing rooms and to level common areas to a super ﬂat SR1 surface regularity. Mapelastic AquaDefense readyto-use rapid-drying liquid membrane was applied to waterproof damp areas throughout the complex.

All tiles were installed with Mapei Keraquick S1 quick-setting, deformable adhesive and fixed with Ultracolor Plus antiefflorescence, quick-setting and drying polymer-modified grout, which feature water-repellent DropEffect® and mouldresistant BioBlock® technology. Both products have since become part of Mapei’s Zero Line. Mapei Topcem, along with Keraquick S1 and Ultracolor Plus, also benefit from EMICODE: EC1 Plus formulations.

Mapei UK 0121 508 6970 www.mapei.co.uk

Aquaservice Expands UK Team With Two New Appointments

Aquaservice AS, a leading provider of advanced water treatment technologies, are pleased to announce two exciting additions to the leadership team at their UK operation that will also now trade under the name of Aquaservice Water Engineering UK Ltd.

Duncan Ockendon B.Sc. (Hons.) has joined the Oxfordshire-based company as Sales Director, and brings with him a wealth of experience in water treatment and UV disinfection across a range of applications and markets.

Duncan’s leadership will be instrumental in strengthening Aquaservice’s market presence and expanding the company’s client relationships across the region.

In addition, Adam Ashton Burrows will join the ﬁrm as Service Director. With over 15 years of experience in the water treatment industry, Adam also has a strong background in UV technology and operational excellence, customer service innovation, plus team development.

Under the leadership of UK Managing Director Diane White, together, this leadership team brings more than 75 years of combined experience in the UV and water treatment sector – a powerful foundation for innovation, technical excellence and customer satisfaction.

Commenting on the two appointments, Diane White said: “Their expertise will help us elevate our service delivery and ensure we continue to exceed customer expectations.

“Please join us in giving both Duncan and Adam a warm welcome. We look forward to the impact they will make and the leadership they will bring to our UK operations.”

Aquaservice Water Engineering UK 07469 879242

www.aquaservice.no

Gaffey Welcomes The Next Generation In Leadership

Gaffey technology, a leading innovator in advanced in-situ chemical generation and chemical blending systems for the global water treatment industry, is proud to announce a signiﬁcant milestone in its journey of growth and innovation. Following over 38 years of excellence, the company has completed a successful management buyout as part of its long-term succession strategy.

The transition welcomes the next generation of leadership, with Hannah Gaffey and Daniel Gaffey, who have been in the business for some 10 years, joining the shareholder group alongside longstanding business leader Phil Gaffey and his wife Paula, who has been a key ﬁgure in the company’s organisation for over 15 years.

Hannah and Daniel bring fresh perspectives and expertise to the business. Daniel continues to expand his impact as Product Manager, while Hannah coordinates manufacturing and logistics as Production Manager. Their involvement ensures Gaffey remains a family driven business committed to innovation, sustainability and customer-focused solutions.

Phil Gaffey commented: “Our motto, ‘Water Treatment for Life’ reﬂects our enduring commitment to creating safe, sustainable and cost-effective systems for industries worldwide. This new chapter is an exciting step to drive the business forward with the next generation.”

As Gaffey Technology looks to the future, the company remains dedicated to delivering cutting-edge water treatment technologies that support a safer, cleaner world.

Gaffey 01254 350180 www.gaﬀeytechnology.com

Industry Loses Another Personality With Passing Of John Crossman

SPN were saddened to learn of the recent death of Aquaflex Chairman John Crossman who had been fighting a long-standing illness which he had faced with remarkable courage for many years. His strength, kindness and leadership will always be remembered at Aquaflex and by those who knew him.

John was a founder Director of the Wiltshire-based company, along with Neil Dalziel and Terry Wickham. Born in 1951, he went to school in Frome, Somerset, then started work in the sales department at Wallington Weston (which later became Weston Vinyls) who at one point were the only manufacturers of vinyl liner raw materials in the UK. He then gained more invaluable

experience working at Allen Plastics, before creating Aquaﬂex with Neil and Terry.

Married to Debbie, John was a devoted husband, father and grandfather, and in his spare leisure time, his main hobby was motorcycling. John’s funeral will take place at Salisbury Crematorium on Monday 1 September and anyone wishing to make a donation to his nominated charities (PSP Association and Salisbury Hospice) can do so via Chris White Funeral Directors.

Our thoughts are with his family at this difﬁcult time and John will be deeply missed by all who knew him, staff at Aquaﬂex and numerous others across the wider wet leisure community.

Duncan Adam

The All New Certikin Inverter Pool Pump –

Smarter, Quieter, Greener

The pool pump is the heart of the swimming pool and for decades people have been using single-speed pumps, which have high energy consumption and generate signiﬁcant noise. InverSilence technology has been developed to address these problems and it is this intelligent technology which features in the new Certikin Inverter Pool Pump.

Features include:

• Ultra-efﬁcient inverter technology: Unlike traditional singlespeed pumps, the Certikin Inverter Pool Pump with its InverSilence technology automatically adjusts its speed to meet demand – using up to 90% less energy. That means lower running costs and a greener pool all year round. While many inverter pumps use IE3 motors, Certikin’s IE4 motor offers superior energy efﬁciency for even greater peace of mind.

• Quiet, even at full power: Thanks to its precision engineering and variable-speed operation, the pump runs at 36dB, a 40% reduction on traditional on/off single speed pumps.

• Consistent flow, maximum performance: Whether it’s filtration or backwashing, the inverter technology provides consistent water flow, adapting intelligently for optimal performance and longevity of the entire pool system.

• Easy to use, built to last: With a user-friendly digital interface and rugged, corrosion-resistant components, the Certikin Inverter Pump is built for hassle-free operation and years of reliable use –even in tough pool environments.

• Eco-friendly and future-ready: Ideal for eco-conscious pool owners, this pump signiﬁcantly reduces a carbon footprint whilst meeting the latest energy-efﬁciency regulations.

Engineered for performance, designed for sustainability, and built to last – this gamechanging pump redeﬁnes what’s possible in pool circulation: powerful performance with whisper-quiet operation and unmatched energy savings, all in one sleek, robust unit.

New For 2025 – Exclusive AquaX Models From SCP

SCP UK introduced four new and exclusive Fairland AquaX heat pump models earlier this year – the Cool and Heat AquaX Essential, the AquaX 20 Reversible and AquaX Turbo Silence Vertical –all of which are suitable for domestic projects and available in a range of sizes – plus the AquaX Jumbo for commercial pools, which comes in two sizes.

Concentrating on the domestic models, all three incorporate a ‘Cool & Heat’ function and offer 4-season functionality (request sizing for all year use), with the AquaX 20 Reversible model operating from temperatures as low as -20°C. This model also achieves COP 20 – a new industry standard for energy efﬁciency – with 1 kW consumed becoming up to 20 kW maximum in the pool.

All are extremely quiet in their operation, with the AquaX 20 Reversible and AquaX Turbo Silence Vertical models featuring TurboSilence inverter technology which is an optimised version of Fairland’s original Fullinverter technology.

This perfectly balances the inverter / compressor / control and heat exchanging technology, which creates the turbo

performance and silent operation at the same time.

By incorporating data research and historical analysis of the variable operation conditions of 4-season swimming from the early stage of R&D, TurboSilence inverter technology achieves precise power adjustment and output.

For ease of operation, each model includes a digital control panel plus there’s built in Wi-Fi which ensures simple remote control via an app.

For peace of mind, warranties are long, but vary depending on the model and element – they range from 3 years parts on the AquaX Vertical model up to 15 on both the heat exchanger and compressor on the AquaX 20 Reversible.

SCP UK

01268 273040

www.scpeurope.com

UNIDRIVE 505 – Constant Welding Performance And Quality

The new UNIDRIVE 505 from Leister is ideal for swimming pool builders who want to achieve almost invisible butt weld seams, even when using increasingly popular and durable 2mm reinforced, embossed, textured or digitally printed membranes.

Butt welding is employed on pool ﬂoors to enhance the visual appeal of the ﬁnish, resulting in a smooth, easy-to-clean surface with nearly invisible weld seams.

Traditional hand butt welding requires a high level of skill and is often a labourintensive process, which can lead to issues like smeared prints and open joint edges that trap dirt and bacteria. The new UNIDRIVE 505 is the solution to these problems.

The product features an innovative Tshaped hot air nozzle that swivels in,

allowing for a 3-in-1 simultaneous welding process. This design effectively welds under and between membranes, producing a nearly invisible seam and a smooth, even surface. It offers precise device guidance thanks to a clearly visible field of vision and the capability to weld with a constant pressure on one of the two defined handles at the rear. This makes it quicker and more consistent than traditional hand butt welding. Additionally, the 505 is designed for ease of use featuring straightforward user instructions and operation via its display, thereby eliminating the necessity for highly skilled and qualified welders.

Welwyn Tool Group

0800 856 0057

www.welwyntoolgroup.com

The AquaX 20

Enjoy The Advantages Of Diamant’s One-piece Polypropylene Pools

When it comes to durable, highquality swimming pools, Diamant’s PPline one-piece polypropylene pools offer an excellent combination of ﬂexibility, longevity and easy installation. Now available in the UK exclusively through Plastica, and designed and assembled in the Diamant factory, these luxury pools are delivered in a single piece, allowing for quick and straightforward placement into the ground with minimal on site work.

Diamant’s polypropylene pools are made from a single-layer material that isfully UV and colour-resistant, ensuring they maintain their aesthetic appeal for years. Unlike traditional pools, they are resistant to osmosis, a common issue in ﬁbreglass pools, which can cause structural degradation over time.

The smooth, non-porous surface of polypropylene prevents the accumulation of dirt, algae and bacteria, making it easy to clean and maintain. This ensures

a high level of hygiene, reducing the need for excessive chemical treatments.

PP pools offer remarkable design ﬂexibility, allowing for various dimensions, shapes and integrated features such as builtin stairs, relaxation areas, integrated slatted covers and massage systems. With material thicknesses ranging from 5 to 12 mm, these pools provide excellent strength while maintaining adaptability.

Polypropylene pools are capable of withstanding extreme temperatures too – from -30°C to 70°C – ensuring year-round usability and resilience in varying climates. Delivered as a fully assembled, one-piece structure, PPline pools eliminate the need for on site welding or complex construction, allowing for quick and efﬁcient installation.

Plastica Pools

01424 857857

www.plasticapools.net

EVAstream Move – The First Battery Operated Counter-current

EVA has established itself as one of the market leaders in high-quality countercurrent systems, driven by a dedication to quality and innovation in partnership with Golden Coast, part of Pollet Pool Group.

The EVAstream Move is the ﬁrst battery-operated, plug-andplay counter-current swimming machine, designed to transform existing pools into continuous swimming spaces.

Its compact and portable design enables year-round swimming without the need for expensive renovations. This innovative device mimics the experience of a competition pool, allowing users to swim freely at home or on the go. Unlike built-in models, the EVAstream Move is fully battery-powered and requires no technical modiﬁcations, making it incredibly userfriendly for any pool owner. It is ready for immediate use and can be operated by a single person. Powered by a rechargeable battery, it offers one to four hours of uninterrupted swimming, depending on the speed setting, and fully recharges in just four hours via a standard 230-volt outlet.

Ideal for pools as small as 4 x 2.5 metres, the EVAstream Move generates a powerful current of up to 250m³ per hour. Its adjustable current caters to both beginners and

experienced swimmers, ensuring a personalised swimming experience.

Users can control the EVAstream Move from within the pool using a water-resistant remote or through the EVA app, which features customisable swimming programmes for tailored training sessions.

Let potential customers experience the EVAstream Move ﬁrst-hand and request a demo unit from Golden Coast.

Golden Coast 01271 378100 www.goldenc.com

Pool Cleaners – From Switzerland To The World

Mariner 3S AG develops, builds and sells cleaning robots for professional swimming pool ﬂoor cleaning –for indoor, outdoor and natural pools. In this way, the company makes a decisive contribution to keeping swimming pools reliably clean and therefore attractive in the long term.

One of the company’s popular options is clubliner series which integrates the technological innovations and know-how derived from years of work in the most compact form. High-quality materials, perfect workmanship, intelligent driving system and a unique filter system don‘t just guarantee a long service life, they make the Mariner 3S clubliner unbeatable in cost efficiency. Developed for pools up to 25m long, it cleans all pool floors as well as paddling pools to a water depth of as little as 20cm with unmatched thoroughness and

also deals with the pool’s walls.

Sophisticated water routing guarantees effective cleaning performance across the entire width of the appliance. The dirty water is first channelled through the filter and only then through the pump. This protects the pump from clogging and damage. Thanks to flow optimisation, no dirt is whirled up that could escape cleaning. Two lamella filters guarantee a large filter surface. The spacious filter box can be conveniently removed from the top of the robot and carried to the cleaning area without any loss of dirt.

Mariner 3S AG +41 78 238 07 09

www.mariner-3s.com

TERRA RAVENA

Introducing The EZ Cover™ Automated Slatted Cover

Available through Catalina Spas, the EZ Cover™ Automated Slatted Cover is a cutting-edge solution designed to enhance a customers' experience by simplifying the process of covering and uncovering hot tubs, swim spas, and pools up to 12 metres long and 3.5 metres wide.

• Effortless Operation: At the press of a button, the EZ Cover™ Automated Slatted Cover extends or retracts smoothly, eliminating the struggle associated with traditional covers.

• Enhance Safety: The sturdy construction prevents accidental access, providing peace of mind for families with children or pets.

• Energy Efﬁciency: The insulated slats effectively retain heat, reducing energy costs and maintaining optimal water temperatures.

• Customisable Aesthetics: Available in white or brown, the sleek design complements various settings, adding a touch of elegance to any space. The system includes an aluminium-framed enclosure that can be installed either above or below ground, and can be covered with the material of your choice for seamless integration.

• Long-Term Durability & Warranty: The foam-insulated slats are made from durable extruded aluminium and require minimal maintenance. The system's motor and control components are built to the highest standards, with a 2-year warranty for added peace of mind.

Available in brown or white slats, each Cover is custom-made to ﬁt the speciﬁc dimensions of the pool, spa, or swim spa. Pricing includes the cover and motor housing frame (external cladding not included).

Catalina Spas

01980 611555

www.catalinaspas.co.uk

Superior Wellness Secures £2.3m UKEF-backed Facility To Aid Export Expansion

Superior Wellness, the world’s fastest-growing manufacturer of wellness products, has secured a £2.3m facility backed by UK Export Finance (UKEF) and NatWest Bank to accelerate its global expansion across the USA, Canada, Europe, and the Middle East.

Based out of the East Midlands, Superior Wellness is a leading designer and manufacturer of wellness products, including hot tubs, swim spas, saunas, and ice baths. Its globally recognised brands, Platinum Spas, AquaSolus, HEKLA, and Chill Tubs are trusted by hundreds of thousands of customers worldwide, including Olympic gold medallists, professional footballers, and Formula One drivers.

To support its expanding US network, the company has opened a dedicated warehouse and logistics hub in Cameron, South Carolina, enhancing service to its 100+ US and Canadian partners while reducing reliance on thirdparty logistics.

The UKEF-backed General Export Facility (GEF) will enable Superior Wellness to invest further in infrastructure, scale distribution, and support

working capital as it continues its international growth journey. UKEF’s General Export Facility helps UK exporters access working capital and trade ﬁnance through guarantees to their lenders.

The business has experienced rapid growth in recent years, with turnover rising from £17.4m in FY23 to £27.7m in FY24 and reaching £39.4m in FY25. From the outset, Superior Wellness has always aimed to become the largest supplier of hot tubs, swim spas, saunas, and ice baths in the world, expanding into new territories throughout Europe and Canada.

Rob Carlin, Managing Director at Superior Wellness and Platinum Spas, said: “This facility is a key milestone in our journey to become the world leader in wellness products. UKEF and NatWest’s backing allows us to invest in our infrastructure and deliver an even better experience for our global partners and customers. We’re incredibly proud of the growth we’ve achieved, and even more excited for what’s ahead.”

www.superiorwellness.co.uk

Innovative Kent-based Sauna Operator Launches Fourth Site

Sea Scrub Sauna and Folkestone Harbour are excited to announce that they have joined forces to bring an entirely new, wellness focussed space to the beautiful setting of Folkestone Seafront.

Blending the best of Scandinavian sauna culture with a quintessentially British twist, this will be the fourth Kent-based facility from the company with other sites located in Margate, Faversham and Whitstable.

The new development will be entirely custom built, set right into the shingle, and will feature two saunas, a wellness café, cold plunge, hot tub, and direct access to The English Channel.

Robin Bartlett, Co-founder of Sea Scrub Sauna, said: "We’re thrilled to share our plans to bring Sea Scrub Sauna to the beach near Folkestone Harbour. Partnering with Folkestone Harbour gives us a unique opportunity to create something really special –drawing on everything we’ve learned over the past three years to build a richer, more expansive experience."

Paulo Kingston-Correia, General Manager of Folkestone Harbour & Seafront Development Company, added: "We've been impressed by Sea Scrub Sauna's spaces in both Margate and Whitstable for some time, and are delighted to be collaborating closely with the team to develop an

expansive offering that not only brings a whole new dynamic to the range of experiences at Folkestone Harbour, but allows the Sea Scrub Sauna team to be ambitious with their plans to bring wellness to our site." Works at Folkestone are set to begin towards the end of 2025.

Discover The All-New Catalina CX-5 Spa

Catalina Spas has proudly unveiled their redesigned CX-5, a spa that is setting a new benchmark in innovation and performance. This next-generation model combines cutting-edge engineering, elegant design, and outstanding value and has been built to captivate customers and strengthen showroom line-ups.

Behind the Catalina CX-5's stunning design lies a powerhouse of engineering built for reliability, efﬁciency, and hydrotherapy. Measuring 2,000mm x 2,000mm x 760mm, this compact yet spacious model holds approximately 1,000 litres of water and seats up to ﬁve people in ergonomically contoured comfort.

Powered by a 3hp pump, the CX-5 delivers robust jet performance through 44 stainless steel hydrotherapy jets that have been strategically placed to target key muscle groups. A 50 sq ft ﬁltration system ensures crystal-clear water and is complemented by an ozone puriﬁcation system and inline chemical feeder for low-

maintenance water care.

The CX-5 is equipped with a 2kW Balboa heating system that is fully controlled via an intuitive Balboa™ touchscreen digital interface, and is known for its reliability and user-friendly design. Connected through the included 16 amp plug, the spa runs efﬁciently with its triplelayer insulation system minimising heat loss and reducing operating costs.

Additional highlights include an integrated Bluetooth™ music system to set the mood and a generous LED lighting package that includes underwater lights, waterline perimeter lights, integrated external cabinet lights, as well as illuminated cup holders, controls, headrests and fountains for a premium sensory experience.

Every CX-5 includes an insulation cover and chemical starter kit, ensuring a smooth setup process right out of the box.

Catalina Spas 01980 611555 www.catalinaspas.co.uk

Earlier this summer, Welsh manufacturer Heartwood Saunas relocated from their original workshop, situated high up in the hills of the Dyﬁ Valley, to the outskirts of Glantwymyn – a small village just outside Machynlleth in Powys – and as a thank you to the team and to all those who helped make the move possible, the business recently hosted a BBQ at the workshop to celebrate the new location and acknowledge all the hard work that has gone into bringing it to life.

The move marks a new era for Heartwood Saunas, with this purpose-built

Following its full acquisition in 2023, Dröm UK has been fully rebranded as KLAFS. The highly experienced team will work alongside Guncast Pools & Wellness – the British specialist in luxury swimming pools, spas, and wellness suites, which has been part of the KLAFS Group since 2021.

KLAFS has long been a pioneer in the design and installation of ultra-bespoke saunas, steam rooms, and spa experiences for both luxury residential and commercial clients. This new identity builds on the company's proud legacy, which now includes the product innovation and expertise of the Dröm UK team.

Andy Carr, CEO of Guncast Group (KLAFS UK), commented: “This is a major step forward for KLAFS, following 18 months of dedicated work to ﬁrmly establish the brand in the UK. As we now move into the next phase of our strategic growth plans, the rebrand marks a pivotal ﬁrst step in their successful execution. Together with Guncast, we are now uniquely positioned to meet growing demand for wellness in the British market, in both the residential and commercial sectors – from leading luxury hotels to boutique spas. Now with an expanded KLAFS showroom presence and even greater product availability, we’re excited to support our clients with more choice and more expertise than ever before.”

Barry Smith, Managing Director at KLAFS UK comments: "We’re proud to continue working with the trusted Dröm UK team and upholding the same values that have deﬁned us for over two decades. Now, under the brand of KLAFS, we’re building on that legacy – bringing our bespoke, customer-ﬁrst approach to a globally respected brand. This next chapter means even more innovation and opportunity for our clients."

KLAFS UK 01932 355655 www.klafs.co.uk

Welsh Sauna Manufacturer Opens New Base

workshop explicitly designed to meet the company’s needs.

Speaking about the move, Olly Davey, Heartwood Saunas Founder and Director, said: “Having this new facility is now allowing us the space to grow our team and to increase capacity to meet the demand for our saunas nationwide.

“It has allowed the company as a whole to do things better across the board. We have implemented a new processes and systems, which were not possible in our old workshop, driving up both quality and efﬁciency.

“We now have allocated space for research

and development-style projects, to be able to test new and more sustainable materials as well as design and deliver on much bigger bespoke projects.

“It’s a big milestone for the Heartwood Saunas team.”

Following the move, the company also has plans to develop the space to welcome visitors and clients, offering an authentic Heartwood Sauna experience on-site.

Heartwood Saunas 01654 701101

www.heartwoodsaunas.com

IN BRIEF

PISCINA BARCELONA 2025 – 22% BIGGER THAN LAST EDITION

Taking place from 17 to 20 November at Fira de Barcelona’s Gran Via venue, this year’s Piscina Barcelona 2025 will be 22% larger than in 2023, will bring together over 400 exhibitors from 30 countries and will double the space dedicated to outdoor equipment. This reinforces its position as one of the most international event in the European calendar for the pool, wellness and outdoor sectors.

Organised by Fira de Barcelona with the support of the Spanish industry association ASOFAP, the event will cover 45,000 m² gross, distributed across Halls 1 and 2 of the venue. In this edition, 68% of participating companies will be international, showcasing the most innovative and representative offerings from across the pool, wellness and outdoor value chain.

“The strong international interest conﬁrms Piscina Barcelona’s status as a global benchmark for the entire sector value chain. The expanded exhibition space, strengthened outdoor segment, and highcalibre scheduled activities all reﬂect the dynamism, innovation, and sustainability driving our industry,” said Ángel Celorrio, Director of Piscina Barcelona 2025.

FIRM HITS MILESTONE ACQUISITION

SPS PoolCare, a leading swimming pool services business formed in 2021, has announced its 150th acquisition.

Headquartered in Austin, Texas, SPS PoolCare provides residential pool services to tens of thousands of customers across Texas, Florida, Arizona and Nevada.

Coinciding with the news, the company also announced the promotion of Lance Martin to CEO. Martin held the role of President and Chief Operating Ofﬁcer since joining and will retain the responsibilities of COO in his new role.

Built To Last: Why Quality Still Wins In The Pool Market

In May, members of the Aqua Technics Pools UK team travelled to Perth, Western Australia to visit the cutting-edge manufacturing facility at Aqua Technics’ global headquarters.

Since its introduction to the UK in 2021, the brand has garnered strong and growing interest from both trade and consumers alike. But witnessing the production process ﬁrsthand brought a whole new level of understanding and appreciation for what sets these pools apart.

Hosted by Darren Godden, General Manager at Aqua Technics Pools Australia, the team was given exclusive access to the company’s fully integrated facility. Every step of production – from concept, design, and mould fabrication; through to lamination and application of the patented Pool ColourGuard® finish – is completed under one roof. There is no outsourcing and no compromises. The company even employs its own industrial chemists who batch manufacture their own raw materials daily to guarantee quality and consistency.

The company’s commitment to R&D is another key differentiator. The pools feature Aqua Technics’ unique Graphene Nano-tech composite core reinforcement, high-performance gelcoats, and advanced colour retention technologies – designed to withstand everything from intense UV in sunnier climes, to prolonged freezing winters. The result is a product that’s not only visually striking, but engineered for longevity, peerless strength and durability, and the lowest lifetime cost of ownership to the consumer.

For the UK team, the visit was more than just a factory tour – it was a deep dive into the engineering, innovation, and craftsmanship that

deﬁne Aqua Technics Pools and a powerful reafﬁrmation of the product’s integrity and the brand’s vision.

As part of their long-term strategy, Aqua Technics Pools UK are now busy exploring opportunities to take selected UK dealers to Australia, giving them the chance to see the process ﬁrsthand.

Aqua Technics Pools UK 03300 437061 www.aquatechnicsuk.com

Ezarri Features At Luxury Oasis On The Côte d’Azur

In the heart of the exclusive French Riviera, where the Mediterranean Sea merges with the sky, a modern and luminous white house shelters a private garden that seems straight out of a dream. Among palm trees swaying gently in the breeze, stands out an elegant rectangular pool, clad with Ezarri´s Bali Stone glass mosaic from the Zen collection - a material that combines beauty, functionality and durability.

The Bali Stone mosaic, with its matte marbled effect, adds a touch of sophistication and serenity to the pool design. Specially designed for aquatic spaces like pools, spas and saunas, this mosaic is not only resistant to water and thermal changes, but also offers an anti-slip texture on the integrated steps at one of its short ends, ensuring safety without sacriﬁcing aesthetics.

Its greenish tones – inspired by Mediterranean nature itself – create a play of light and reﬂections underwater, enhancing the feeling of depth and purity.

The pool, integrated into a lush green environment, becomes the centerpiece of this project. The steps clad with Bali Stone not only provide easy access but also deliver a premium ﬁnish, thanks to the availability of special pieces – Corner and Cove – for edges and transitions.

The house, with its white minimalist architecture, contrasts beautifully with the mosaic´s natural tones, creating a perfect balance between modernity and warmth.

The southern French light caresses the water, highlighting the marblelike effect of the cladding and transforming the pool into a mirror of the sky.

Ezarri Mosaico +34 943 164 140 www.ezarri.com

The Aqua Technics UK team (Left to right), Jessica, Maddison, Anthony and Helen

Unforgettable Moments Begin With A Family’s NIVEKO Pool

“To create a haven of peace and quiet at home, a place to have fun and enjoy some daily exercise” –that was what the Ottosen family had in mind when they decided to fulﬁl their dream of having their own swimming pool. And thanks to their NIVEKO Invisible pool, they have succeeded down to the very last detail.

The clean lines of the 7.5 × 3.5 × 1.5 m Skimmer Invisible, with elegant stairs along the pool width, not only accentuates the modern look, but also makes it easier to get into the crystal-clear water and adds the ﬁnal touch to this space for spending time together. The white pool blends tastefully in with the design of their garden and has become a stylish addition to the house.

The pool also features Aquadeck PC Transparent slats, which are stored in a slatted cover pit and protect the pool when not in use.

Every detail has been thought out to meet the whole family’s

wishes and needs. The result is a space that now exudes peace, tranquillity and joy. From the very ﬁrst day, the pool has been the centre of family life and its greatest value for its owners is what it gives them every day. A few lengths in the morning to wake up, the laughter of children in the afternoon, and a poolside glass of wine in the evening.

NIVEKO, together with their ‘Proﬁ’ partner were reliable partners on this journey, with the partner taking care of the entire process, from the design stage to the installation of the pool. The company was recommended by friends, so they didn’t hesitate to get in touch. Professionalism, an obliging approach and excellent references convinced them that they were in the right hands –and the entire process only went to conﬁrm this.

NIVEKO Pools

+420 572 693 2469 www.niveko-pools.com

Lakeside Thermal Bathing Spa Set To Debut In Canada

BASIN Glacial Waters, Fairmont Chateau Lake Louise's highly anticipated thermal bathing destination, is to ofﬁcially open in September. The debut of the world class, indoor-outdoor facility is set to revolutionise wellness in the Canadian Rockies with its contemporary interpretation of a traditional bathhouse – embedded within the landscape of Banff National Park's high alpine setting.

A concept two decades in the making and realised by acclaimed architect and designer Matteo Thun, BASIN Glacial Waters is inspired by the healing beneﬁts of natural springs, thermal waters, and long-established wellness practices of Nordic sauna culture, yet reimagined through a luxury lens. Resting at an elevation of 1600m (5,200ft) with an uninterrupted vista of Canada's iconic Lake Louise and the impressive Victoria Glacier – the facility's mineral-rich, natural water source – BASIN is presented in minimalistic grandeur, with organic textures and a strong sensibility towards conscious sourcing and sustainability.

Elements of water – from crushed ice to steam mists – are the basis; an invite to immerse into self-guided circuits flowing between varying heat and humidity states of the traditional Finnish and bio saunas, Aufguss sauna, steam rooms, hot stone massage room, and silent salt relax room – with its gently warm glow from the Himalayan salt wall naturally ionizing the air. In addition, a series of diverse temperature pools, including a reflexology pool, infinity pool spanning onto the outdoor terrace and Kneipp walk, for standing contrast bathing. Two wet treatment rooms further enhance the thermotherapy cycle, one of which being modelled on a traditional Hammam for full-body exfoliation.

Norwegian Cruise Line Announces New Great Tides Waterpark

Innovative cruise operator Norwegian Cruise Line recently announced additional details for its private island transformation on Great Stirrup Cay in the Bahamas headlined by a nearly six-acre Great Tides Waterpark opening in summer 2026, and more incredible experiences to bring unforgettable adventures and endless relaxation for its guests.

From cliff jumps and jet karts to swim-up bars and splash zones, the expansion of the island's offerings is designed to elevate every guest's experience – adults and kids alike –with more freedom, more ﬂexibility and more ways for them to discover "The Great Life!" at Great Stirrup Cay.

Anchored by 19 waterslides – from

adrenaline-boosting to laid-back adventure – a nearly 800-foot dynamic river, the 9,000square-foot splash zone for kids, and the

industry's ﬁrst cliffside jumps, Great Tides Waterpark will deliver guests more to do and more to enjoy.

"Great Stirrup Cay has always been an amazing part of the Norwegian Cruise Line guest experience and continues to be one of our highest rated destinations," said David J Herrera, President of Norwegian Cruise Line. "At 270 acres our private island provides us with an incredible blueprint to reinvent what guests can experience when they escape to 'The Great Life' with us. This new waterpark is an outstanding addition to our recent announcement about other amazing new amenities on the island soon to debut.”

It gives me great pleasure to announce that both SPATA and BISHTA have decided to update their branding, which includes the logos for each trade association.

The debate at SPATA’s National Council and BISHTA’s Committee has been excellent (as usual) about what is required, and the result is that the ﬁnal touches are being made to ensure that both logos will be ready to be revealed at the annual conference on 15 October. The logo change will reﬂect a modern ‘feel’ but will retain the authority expected of a trusted trade association.

The new branding will also be reﬂected on the new websites, which are under development and expected to be ready for launch at SPATEX 2026. We extend our thanks to Adtrak for the excellent work undertaken so far, and we look forward to further progress as we head towards Coventry!

Talking of Coventry, Michele, Helen and the rest of the team are really excited to be organising the 30th anniversary of SPATEX in 2026, and they will have lots of news to announce over the coming months. The show will have even more ﬂoor space to ensure that the extra demand can be met.

The BISHTA and SPATA stand will be moving diagonally opposite its traditional location, so we look forward to seeing you next to Arena 2.

The latest update from the EDI (Equality, Diversity and Inclusion) subgroup is that they

Rebranding, Awards, EDI And Much More!

on work taking place behind the scenes that will help to make the wet leisure sector a more

have approved a GoFundMe page to raise awareness and funds for this vital work. Thanks are due to Dash Ganeson (for the idea) and to both Dash and Patrick Thorpe for being the ﬁrst two people to pledge money for the page.

The money will be used to subsidise places on the EDI training courses and to raise further awareness.

If anyone would like to support this initiative, you can book a place on a course by contacting the BISHTA/SPATA ofﬁce via admin@bishta.co.uk or admin@spata.co.uk. Alternatively, if you are willing to donate funds, please visit the BISHTA /SPATA websites.

If you’re thinking of entering or sponsoring the British Pool & Hot Tub Awards 2026, entries are now being accepted online from SPATA and BISHTA members. The deadline for submitting entries is Friday, 31 October 2025. Visit the SPATA/BISHTA websites for entry and to view the categories and what’s new for 2026.

In this issue, we have news of SPATA and BISHTA members who have been shortlisted for the 2025 EUSA European Pool & Spa Awards, to be held in Barcelona; please see the following pages for more.

As touched on, the annual British Pool and Hot Tub Conference will take place on Wednesday 15 October 2025 –so ensure you save the date! The Conference is open to SPATA and BISHTA members, and ﬁnal discussions are underway regarding the event, which is planned to be held online.

Attendees will be among the ﬁrst to witness the bold new rebrand of SPATA and BISHTA, as Adtrak unveils the fresh logos and exciting updates live at the event!

Members will be updated in the weekly e-newsletters about the venue and speakers. We look forward to seeing you in the autumn!

Moving on to the subject of staff, we have been so lucky with the team that works so tirelessly on behalf of BISHTA and SPATA members, and it has just been strengthened by the arrival of Fay Richardson.

Fay is bringing a wealth of experience to her role as Membership Co-ordinator at the BSPF, and with Jenna Patterson also stepping into the position, this marks an exciting time for the organisation.

The existing team in Andover also includes Claire Maguire, who has added the Ofﬁce Manager role to her Business Development job description; Sallie Leslie-Golding is the PR & Marketing Manager (pulling all the strings to ensure that our industry knows what is going on and can make an impact with domestic and commercial end users); and Debbie Thornton is not only providing the all-important bookkeeping and accounts support, to make sure the ﬁnances are in good shape, but she is helping review many services where we may be able to get even better value for money.

Please note that there will be more news on the SPATEX team and an additional person in the next issue of SPN!

We are fortunate to have such an incredible team working to support the industry. Thank you to you all!

UK Excellence Recognised As EUSA Shortlist Revealed

Here, SPATA and BISHTA reveal the UK’s shortlisted entries for EUSA’s 2025 European Pool & Spa Awards, the winners of which will be announced later this year at the Piscina Barcelona exhibition, taking place in Spain

The European Pool & Spa Awards, hosted annually by the European Union of Swimming Pool and Spa Associations (EUSA), celebrate the very best in domestic pools, spas, and hot tubs across Europe. Now in its thirteenth year, the 2025 edition of these prestigious awards will culminate in a grand ceremony on Wednesday 19 November at Piscina Barcelona – pool, wellness and outdoor exhibition.

Representing the UK, SPATA (Swimming

Pool and Allied Trades Association) and BISHTA (British and Irish Spa and Hot Tub Association) have proudly submitted entries from the winners of the 2025 British Pool & Hot Tub Awards. Being shortlisted for the EUSA Awards is a signiﬁcant achievement, offering companies exceptional PR exposure, enhanced credibility, and a competitive edge in the wet leisure sector. This opportunity also showcases the outstanding standards and quality of work produced by members of the UK trade associations.

The EUSA Awards are open to all national associations that are members of EUSA, with each association submitting entries on behalf of their member companies. All entries must comply with relevant European and national standards. Entries are judged anonymously by a panel of experts from each member country, who evaluate each submission based on visual impact, innovation, and aesthetic appeal. Judges aim to award Gold, Silver, and Bronze in each of the 11 categories, ensuring a fair and competitive process.

Domestic Indoor Pools –CB Pools

Domestic Spas –Cresta Leisure

Spas –XL Pools

Domestic Spas –Centurion Leisure

Domestic Spas –Tanby Pools

Indoor Pools –Whitewaters

Domestic Hot Tubs –Concept Spa

Domestic Hot Tubs –1 Stop Spas Domestic Hot Tubs –USSPA

Domestic Hot Tubs –USSPA

Domestic Hot Tubs –SpaFlo

Domestic Pools With An Enclosure –Centurion Leisure

Domestic Pools With An Enclosure –Alukov UK

Domestic Pools With A Cover –Lagoon Pools Construction

Pools By Night –Centurion Leisure

Renovation –A19 Pools & Spas

Renovation –Mermaid Pools

Renovation –Tanby Pools

Renovation –Centurion Leisure

Renovation –Cresta Leisure

Pools In Touristic Establishments –Cresta Leisure

Pools In Touristic

–Cresta Leisure Wellness Pools –Origin Leisure

Swimming Pools Outside Europe

Swimming Pools Outside Europe –Niveko

Cybersecurity In The Wet Leisure Sector

In this latest issue, Nick Elwell from specialist insurer BGi.uk looks at the subject of cybersecurity, and why awareness and training matter more than ever for businesses operating in the wet leisure sector and beyond

In today’s increasingly digital world, businesses in the wet leisure sector, whether involved in design, installation, maintenance, equipment supply, or education, are more reliant than ever on technology. From collecting and sharing client data to processing online orders and payments, digital tools are deeply embedded in daily operations. Even routine tasks, such as sending emails or managing customer communications, involve handling sensitive information.

However, this reliance comes with risks. Cyber threats such as phishing scams, whaling, and ransomware attacks are no longer conﬁned to large corporations. Small businesses, sole traders, and self-employed professionals are increasingly vulnerable to data breaches that can cause irreparable damage. The wet leisure sector is not immune, and the need for robust cybersecurity measures has never been more urgent.

Recognising the growing threat, BGi.uk – a specialist insurer in the pool and spa industry – has taken proactive steps to support businesses beyond traditional insurance. Through its sister company, Gambryce.io, BGi.uk offers accessible and practical cyber training tailored speciﬁcally for small businesses and operators in the wet leisure sector.

This training is delivered through short, low-cost video modules designed to build and reinforce basic cyber awareness. The content is suitable for all team members, regardless of their technical expertise, making it an ideal solution for businesses of all sizes.

SPATA (Swimming Pool and Allied Trades Association) and BISHTA (British and Irish Spa and Hot Tub Association) have also stepped up, actively supporting this initiative and encouraging their members to take cyber risks seriously. Their involvement underscores a shared commitment to helping businesses stay secure and resilient in an increasingly digital environment.

WHY CYBERSECURITY TRAINING IS ESSENTIAL

Cybersecurity is not just a technical issue; it’s a human one. Most data breaches begin with simple human errors: clicking on a malicious link, using weak passwords, or failing to recognise a scam. Training empowers staff to

become a ‘human ﬁrewall’, capable of identifying and stopping threats before they escalate.

Even sole traders and small partnerships are targets. If someone uses a smartphone, laptop, or email for work, they’re exposed to cyber risks. Moreover, regulatory compliance is critical. Laws like GDPR require businesses to protect customer data, and failing to do so can result in serious consequences. Cyber training helps teams understand their responsibilities and stay compliant.

Trust is also a key factor. Customers want assurance that their data is safe.

Demonstrating that your team is trained in cyber awareness builds credibility and strengthens client relationships. Importantly, the cost of training is minimal compared to the potential ﬁnancial and reputational damage that can result from a cyberattack.

WHAT GAMBRYCE TRAINING OFFERS

The Gambryce training programme consists of bite-sized video sessions that are easy to follow and free of technical jargon. These modules are designed to raise awareness and provide practical steps that staff can implement on a daily basis. Topics include:

• Spotting fake emails and scams

• Handling customer data securely

• Responding effectively to cyber incidents

• Building safe digital habits.

The training is designed to be part of an ongoing learning process, not just a one-time

exercise, helping businesses maintain a robust cybersecurity posture over time.

By working with BGi.uk and Gambryce, SPATA and BISHTA are helping members future-proof their businesses against digital threats. They are actively promoting practical tools and training, making it easier for members to access affordable, sector-relevant solutions. Membership in these associations means being part of a community that values high standards, not only in pools and spas but also in business resilience and digital safety.

FINAL THOUGHT: SECURITY IS A SHARED RESPONSIBILITY

Cybersecurity isn’t just the responsibility of an IT person – if businesses have one. Everyone in a business plays a role in protecting data, customers, and reputations. Taking a few minutes to build cyber awareness today could save hours of stress and signiﬁcant ﬁnancial loss tomorrow.

As cyber threats continue to evolve, so must the defences against them. Investing in training is not just about avoiding risk; it’s about empowering teams, protecting clients, and securing the future of businesses.

If you're interested in accessing the Gambryce cyber awareness training, reach out to SPATA, BISHTA, or BGi.uk for more information. Protect your business and stay ahead in today’s digital world.

BGI.uk 01367 246130 www.bgi.uk

Small businesses, sole traders, and selfemployed professionals are increasingly vulnerable to data breaches that can cause irreparable damage”

The Science Of Biofilms –Managing The Microbial Risk

In this issue, STA Pool Plant Tutor Chris Bateman delves into the science of biofilms – examining how they develop in aquatic facilities, the risks they pose to bathers, and the best strategies for prevention and control

Swimming pools and spas may look clean, crystal clear, and chemically balanced – but they can still harbour a hidden biological threat: bioﬁlms. These highly organised microbial communities form on submerged surfaces and represent one of the most persistent and technically challenging risks in aquatic facility management.

Far more than a thin layer of ‘slime’, bioﬁlms are living ecosystems. They’re composed of bacteria and other microorganisms encased in a self-produced matrix called EPS (extracellular polymeric substance), made up of sugars, proteins, lipids, and DNA. This dense, protective structure shields microorganisms from disinfectants like chlorine and bromine, as well as from mechanical cleaning.

As a result, bioﬁlms can become reservoirs for dangerous pathogens – Pseudomonas aeruginosa, Legionella pneumophila and Cryptosporidium among them – posing serious health risks to swimmers, especially children, the elderly and immunocompromised individuals.

HOW BIOFILMS FORM

Despite their complexity, bioﬁlm formation can begin under surprisingly simple conditions: a moist surface, the presence of microorganisms and an environment that allows microbial survival. From there, a sophisticated biological process unfolds:

• Attachment – Free-ﬂoating (planktonic) bacteria adhere to a surface, often attracted by tiny surface charges or organic debris.

• Colonisation – Bacteria begin producing EPS, anchoring themselves more securely.

• Growth And Communication – Through quorum sensing (chemical signalling), bacteria coordinate their behaviour and rapidly build a mature, structured bioﬁlm.

• Dispersion – Portions of the bioﬁlm break off and spread, allowing new colonies to establish throughout the system.

Bioﬁlms can form on virtually any surface –

PVC pipework, stainless steel fittings, tiles, pool covers, and especially sand filters, which contain hidden crevices perfect for microbial growth, often overlooked in routine checks, can become biofilm hotspots.

Flow dynamics also play a role. Wellcirculated areas may resist early attachment, but ‘dead zones’ – corners, seams and areas of low flow – encourage microbial settlement. In filters, even backwashing may not fully remove embedded biofilms, allowing bacteria to persist and repopulate the system.

THE WARNING SIGNS

The signs of biofilms often go unnoticed until they become more obvious. Water may appear cloudy despite correct chemical readings, or there may be a strong ‘chlorine’ smell caused by chloramines – a by-product of chlorine reacting with organic material. Musty odours around plant rooms or balance tanks, fluctuating chlorine levels, and reduced sanitiser efficiency are further warning signs. In more advanced cases, slimy textures on pool surfaces or visible growths on fittings confirm that biofilms are firmly established.

A pool may appear compliant on paper but still harbour infection risks if bioﬁlms are present. The protective matrix allows pathogens like Legionella to survive even in water with acceptable chlorine levels. This is why the detection and breakdown of bioﬁlms – not just chemical treatment – is crucial.

HEALTH AND OPERATIONAL RISKS

The consequences of biofilms are significant. They don’t just protect nuisance organisms –they create safe havens for serious pathogens. Infections linked to biofilm-protected bacteria include hot tub rash (folliculitis) from Pseudomonas aeruginosa; Legionnaires’ disease, a severe respiratory illness caused by Legionella pneumophila; gastrointestinal infections from organisms like E. coli or Cryptosporidium; and swimmer’s ear and other ear, eye and skin infections.

From an operational standpoint, bioﬁlms increase chemical demand, lead to cloudy water, create odours and shorten the life of

ﬁltration systems. They also require more time, money and energy to treat once established.

PREVENTION AND CONTROL

Combating biofilms takes more than routine chlorination – it requires a layered and proactive strategy. Regular physical cleaning, including brushing pool walls, tiles and fittings, helps prevent early attachment. Frequent inspection of filters, balance tanks and pipework helps catch problems before they escalate. Shocking the system with periodic superchlorination or oxidising treatments can also help break down biofilm layers, and advanced disinfection technologies like UV, ozone, or submicron filtration are especially useful in high-risk settings such as spas and splash pads. Continuous chemical and microbiological monitoring is also essential, enabling operators to spot trends and take corrective action before a full outbreak occurs.

Training plays a vital role. Pool plant professionals must understand not only how to spot the signs of bioﬁlms but also how to take decisive action before they cause harm.

STAYING ONE STEP AHEAD

Ultimately, biofilm control is not just about treatment –it’s about knowledge and vigilance. Understanding the science behind biofilms allows operators to take a strategic approach to their prevention and management. And, professional qualifications, such as STA’s Level 3 Award in Pool Plant Operations, ensure that operators are equipped to protect bathers and maintain a safe, hygienic aquatic environment.

STA is also a member of the Biofilm Alliance, reflecting its commitment to advancing biofilm awareness, research, and operational standards across the leisure industry. By working alongside this network, STA aims to improve knowledge and raise best practice across the sector.

With the right expertise, training, industry collaboration, and preventative measures in place, aquatic facilities can stay ahead of this hidden but formidable threat.

For more resources and guidance on pool plant operations, visit the STA website.

STA 01922 645097 www.sta.co.uk

Ocea UK Partners

Ocea UK is excited to announce a strategic partnership with HTP Group, making them the exclusive UK distributor for Sterck Polystone® Pools

This collaboration unites:

• Sterck’s precision European manufacturing of Polystone® pools.

• HTP Group’s extensive UK installation expertise.

• Ocea UK’s comprehensive lifetime sales, support, and aftercare.

Alan Thorne, Ocea Company Director, highlights that this partnership: “Sets a new standard for quality, precision and comprehensive support in the UK swimming pool industry, offering B2B customers a truly superior one-piece pool solution.”

KEY HIGHLIGHTS FOR B2B PARTNERS:

Unrivalled Quality: Pools are crafted from Polystone® PP-C PG, known for exceptional structural integrity, durability, and resistance to UV and chlorine.

Superior Aesthetics: Seamless surfaces and meticulously crafted stair designs with invisible welds.

Flexible Customization:

• Standard (CTO): Quick lead times for common sizes and features.

• Engineered (ETO): Full personalization for complex projects, including lengths over 12m, sloping floors, and custom designs.

Expert UK Installation: HTP Group’s 15+ years of experience ensures precise delivery and commissioning.

Comprehensive Lifetime Support:

Ocea UK provides full after-sales service, including annual maintenance, remote support, and readily available spare parts.

Advanced Features: Seamless integration of Roldeck covers, flush-mounted inlets/lighting, and Starline swim jets with smart controls.

This partnership is set to redefine quality, efficiency and aesthetics in the UK swimming pool market, managing the entire pool journey from start to finish.

Ocea UK

Ocea UK Announces Strategic Partnership With HTP Group

Britain’s one-piece pools sector is set to offer even more options following an agreement between Ocea UK and HTP Group for the exclusive launch and distribution of Sterck Polystone® Pools. Here, we take a closer look at the details

Ocea UK were delighted to announce a groundbreaking new partnership recently with HTP Group, a leading UK-based polypropylene pool installer, for the exclusive launch and distribution of Sterck Polystone® Pools across the UK. This strategic collaboration marks a signiﬁcant milestone in the UK pool industry, bringing together elite European manufacturing with expert UK installation and comprehensive aftercare.

This exciting venture represents a new chapter in design-driven pool building for the UK market. The partnership leverages the unique strengths of three industry leaders:

• Sterck: A specialist European manufacturer renowned for its precision-engineered Polystone® swimming pools.

• HTP Group: A highly experienced UKbased polypropylene pool installer, now the exclusive UK distributor for Sterck pools.

• Ocea UK: A trusted name in pool sales, support and aftercare, providing comprehensive lifetime support for Sterck pools in the UK.

“We are incredibly excited to bring Sterck Polystone® Pools to the UK market through our exclusive partnership with HTP Group,” said Alan Thorne, Director at Ocea UK. “This collaboration sets a new standard for quality, precision, and comprehensive support in the UK swimming pool industry. Our B2B customers can now offer their clients a truly superior one-piece pool solution, backed by unmatched expertise from fabrication to after-sales service.”

“Designing great pools is one thing –installing them to perfection is another,” added Lewis Salvidge, Managing Director of HTP Group. “With over 15 years of hands-on expertise installing polypropylene pools across the UK, our team are specialists in the nuances of transporting, positioning, and commissioning modular pool systems. Becoming the exclusive UK distributor for Sterck Pools allows us to bring their European manufacturing prowess

directly to UK soil, ensuring every pool is not just designed to impress, but built to last.”

For those unfamiliar with the brand, Robert Hermkens, Managing Director of Sterck provided some background: “For Sterck, precision isn’t a goal – it’s a foundation,” he stated. “With a background in industrial plastics engineering and advanced pool manufacturing, I’ve spent over a decade driving innovation in custom polypropylene pool design. Under my leadership, Sterck developed a market-leading process for fabricating pools with Polystone® PG –offering unmatched mechanical strength, dimensional stability, and aesthetics. We are proud that Sterck comes from the same manufacturing stable as the renowned Starline Monoblock pools, ensuring a legacy of craftsmanship and unparalleled quality.”

A NEW ERA OF POOL CONSTRUCTION: PRECISION ENGINEERED, EXPERTLY DELIVERED

Sterck Polystone® Pools are crafted using Polystone® PP-C PG, a material specifically engineered for demanding aquatic environments. This branded material ensures exceptional structural integrity, flexibility, and longevity, and is resistant to UV and chlorine. Each pool is welded to stringent DVS standards and produced from Röchling-certified Polystone® PG. The sturdy PPC walls, with a thickness of 10mm, and vertical reinforcement ribs of 15mm PP, combined with 30mm XPS 300Kpa insulation panels, provide high mechanical stability and excellent insulating effects, retaining pool water heat.

KEY ADVANTAGES FOR B2B PARTNERS

• Unmatched Quality And Durability: Offer clients pools made from market-leading Polystone® PG, known for its mechanical strength, dimensional stability and aesthetic appeal.

• Superior Aesthetics: Sterck pools feature seamless surfaces for a hygienic and easyto-clean ﬁnish. Stair designs are meticulously crafted with invisible welds on the visible side, ensuring an optimal aesthetic look.

• Extensive Customisation Options: Sterck provides unparalleled ﬂexibility in design, offering both standard (Conﬁgure-to-Order – CTO) and custom (Engineering-to-Order –ETO) solutions. Sterck Standard (CTO)

pools are available up to 4.68m wide and 12m long, with depths from 1.25m to 1.50m. Features include full-width steps, corner stairs, and serviceable lounge decks, with quicker lead times and cost efficiency. Sterck Engineered (ETO) pools are for projects requiring the ultimate in personalisation, including lengths exceeding 12m, sloping floors, benches, flood walls, and custom stair designs. These are ideal for architectural or commercial sites.

• Expert UK Installation By HTP Group: With over 15 years of hands-on expertise installing polypropylene pools across the UK, HTP Group ensures precise transportation, positioning and commissioning of every Sterck pool.

• Comprehensive Lifetime Support From Ocea UK: A Witney-based team provides full after-sales support, including annual servicing, cover replacement, remote technical support, onsite repairs, and readily available spare parts. Every pool includes warranty and full documentation.

• Advanced Features Integration: Seamlessly integrate Roldeck pool covers, concealed under stairs or within a niche for easy maintenance. Choose from a range of builtin parts, including ﬂush-mounted options for inlets and lighting for a sleek ﬁnish. Enhance the swimming experience with Starline swim jets, many with colourchanging LED lights and app control for personalised training programmes.

This partnership elevates the entire pool construction process, from initial site visit to long-term service. HTP Group will manage the entire installation journey, ensuring a seamless transition from vision to a ready-to-enjoy pool. Both HTP Group and Ocea UK invite all existing and potential B2B partners to explore the future of pool design with Sterck Polystone® Pools. This collaboration is set to redeﬁne expectations for quality, efﬁciency, and aesthetics in the UK swimming pool market.

HTP Group 01174 037839 www.htpgroup.co.uk

Ocea UK 01993 700236 www.oceauk.com

EcoPure Glass filter media is manufactured from recycle glass and is a viable alternative to sand.

• Doesn’t degrade

• Is cost-effective

• Is more efficient

• Offers remarkable purity

• Reduces initial backwashing

Also available in three grades with sizes from 0.5mm up to 6mm.

Old Meets New In Cambridgeshire Village

In this issue, we take a look at how a domestic swimming pool owner, located in a village with old roots, benefitted greatly from Waterco’s modern filtration technologyto achieve crystal clear water with the minimum amount of effort

The village of Great Shelford on the outskirts of Cambridge plays host to the annual Midsummer Fair and Shakespeare Festival, and summers aside, like large parts of the country, it’s an area well known for having typically wet and cool English weather.

While Cambridge is recognised for its vast student population, it is also one of the fastest growing areas in the UK for high tech businesses and the home of many start-ups and spin offs from the university. This has meant a growing demand for housing to accommodate families moving into the area –in particular, the villages around Cambridge are seeing a lot of development and increased trafﬁc.

Nestled in the outskirts of Great Shelford lives a small family, who have enjoyed the benefits of life with a garden pool for well over 25 years. The Philips family also enjoy the convenience of being close enough to the city to cycle in – however, roads are increasingly busy and there is extensive building work taking place with developments seemingly always being in mid construction.

Due to increased air pollution, Mrs Philips decided to refurbish and reﬁt all equipment for the family’s 50m³ in-ground pool.

“I opted to have a new liner fitted, as well as a completely new range of pool equipment, as my previous equipment couldn’t handle the dust produced by nearby construction sites, as well as the debris created in fields nearby when they are being farmed,” explained Mrs Philips. “The clarity and quality of the pool water suffered – it always seemed dirty and never looked as clean as I would have liked. I even considered having the pool filled in, as the maintenance was just too time consuming and I was beginning to wonder if it was time to just give up on owning a pool.”

The sand filtration system Mrs Philips had installed previously was unable to filter out the super fine particles of dust from the nearby fields and building work, leading to frequent occurrences of build up inside the filter.

This increased the need for backwashing, which was both a time consuming maintenance task and a huge waste of water.

“I spoke with several pool companies and told them my problem and was told about the

new media that was available – Waterco’s glass pearls,” she said.

“It seems a lot has changed from when I had the pool built 25 years ago! After checking the facts online, I realised I could make my life easier and enjoy having a pool again.”

Mrs Philips also liked the fact that Waterco had a local base in the UK. Plus, the Micron sand ﬁlter, one of the other solutions she chose, came with a ten year warranty and had a unique lateral design, which kept water costs and chemical costs down without sacriﬁcing good results.

She decided on the Waterco Glass Pearl

media, Micron side mounted sand ﬁlter and a Lacronite pump – all of which only took a few hours to install into her newly relined pool.

“Never in 25 years has the pool water looked so good – even the neighbours have commented how crystal clear the water is and have asked what I have done. I would recommend Waterco Glass Pearls and Micron Sand Filter to anyone wanting crystal clear water with the minimum amount of effort.”

Waterco Europe 01795 521733

www.waterco.eu

THE WATERCO EQUIPMENT IN A SNAPSHOT

Glass Pearl Media: The next generation in filter media – these chemically inert glass pearls can filter out dirt particles below 3 microns in size. The spherical shape also results in low friction levels, reducing the need to backwash and saving pool owners both time and precious water. Plus its high purity means very little backwashing is required to cleanse the filter media prior to commissioning the filter.

Glass pearls are also safer for swimmers if they were ever to leak from the ﬁlter into the pool, because of their smooth and spherical shape.

Micron Sand Filter: Waterco’s range of Micron Sand Filters are designed for durability and efficiency, with a fibreglass reinforced polyester resin construction and the latest controlled filament winding machine. They use ‘depth filtration’ to drive dirt through the filter bed, allowing only cleansed water to pass through the filter’s laterals.

Micron Sand Filters are easy to maintain and clean, with a monthly backwash as easy as turning the Multiport lever from ﬁlter to backwash.

Lacronite Pump: The Lacronite pump is perfect for larger size domestic swimming pools, as its consistently high level of performance allows it to deal with a huge volume of water, plus the dirt and debris that comes with it.

This pump is designed to save money, energy and time, with the speed settings allowing for reduced water ﬂow without compromising the effectiveness of the ﬁlter

Never in 25 years has the pool water looked so good – even the neighbours have commented how crystal clear the water is and have asked what I have done”

Dual Use Swim Spas For Exercise And Relaxation

For anyone wanting to both relax and exercise in water, swim spas tick both boxes, and can often comple te the budget box too! Normally chosen as an alternative to a traditional small garden pool, these counter-current equipped products have options covering both price conscious families, through to top-level athletes that need a serious training aid. In this issue, we take a look at what’s currently available

By Jon Wadeson

As a single product offering the combined beneﬁts of both a swimming space and a hot tub or spa environment that comes in a relatively straightforward to maintain and own package that can also be installed quickly –that’s a summary of a swim spa and it’s not surprising that they have become a ﬁrm favourite with both families and serious athletes plus anyone in between over recent years.

Swim spas come in many shapes, sizes and therefore budgets too. For families who want to provide some water based fun and entertainment but without splashing out too much, there’s clearly a lot to like at the entrylevel end of the market and the versatility of the products found at this lower end of the swim spa price range mean that owners have an area where the kids can let off some steam, and at other times, there’s also the option of a dedicated pool for either some gentle exercising or a space in which to relax and soothe away any aches and pains.

At the other end of the market, more serious swimmers and athletes will want a much more complete set of features and budgets will reﬂect this.

Whatever the need, when comparing costs to many swimming pools, a self-contained swim spa package represents nothing short of outstanding value for money, which of course further adds to their appeal.

With a number of manufacturers providing numerous models across the sector, here, we highlight just a few of the options

PASSION’S ACTIVITY MODELS –FOUR VALUE FOR MONEY OPTIONS

For the last three decades, Netherlands-based Passion Spas has been engineering and manufacturing numerous spa and hot tub models and the company has perhaps one of the widest ranges of swim spas on the market.

All of the company’s models represent great value for money so it’s no surprise that their entry-level products have always been popular and they have been keen always to offer new models that keep up with the latest technology and trends.

One of the company’s newest series of swim spas is the Activity, and the range offers models with two different lengths and two depths, providing ﬂexibility at a key price point. Whether the Activity 1, 1 Deep, 2 or 2 Deep is chosen, each model is a dynamic swim spa that is an excellent blending of two worlds.

On one side there is all the comfort, pleasure and therapy beneﬁts of a traditional spa or hot tub which is provided by 50 massage jets, whilst on the other side, the swim function is equipped with Passion Spas’ unique River Swim System™ and Current-lift Technology™.

The River Swim system consists of two floor jets and five large swim jets, placed in a row to create a steady flow of water over the entire width of the swim spa. Users can control the intensity of the water stream and when doing so, the flow is equally divided over the whole width of the current.

Because of this unique technique, the water stream covers a wide area and is effectively positioned below the water

surface, enabling users to swim with their head comfortably above water.

If the intensity of the River Swim System is decreased, the Current-Lift Technology is automatically activated, enabling the swimmer to remain in the prone position.

SWIMMING

ON A BUDGET AT THE WEEKEND AND ANYTIME WITH SCP

Introduced last year and available exclusively through SCP UK, the WeekEnd 453 swim spa combines unique training solutions with individual settings to provide the right swimming programme for any swimmer. With a size of 4,530mm x 2,350mm x 1,470mm, along with a large swim chamber it is equipped with two seats out of the way of the powerful swim current, meaning non swimmers can relax whilst someone else is swimming.

With a water capacity of 5,900 litres, the swim spa features 27 massage jets, comes with grey vinyl insulated cover, plus a swim stick/tether. It’s also available with an optional sounds system.

Jets, underwater lights, an Ozone water treatment system and more are all controlled via the WeekEnd’s state-of-the-art controls, which can also be linked via Wi-Fi to any smartphone.

Many swim spas will not provide a challenging swim, but with three powerful swim pumps delivering an airless, controllable swim current, this swim spa works for light exercise through to a full training swim.

Available as a semi in-ground and aboveground version at no extra cost, the shell is

Passion Spas’ Activity 1 Deep is a dynamic swim spa that is an excellent blending of two worlds

SCP UK’s WeekEnd 453 swim spa combines unique training solutions with individual settings

produced in Sterling Silver and with a maintenance-free grey cabinet, plus its dark grey cover, it’s sure to ﬁt in in any domestic environment.

For an entry-level model, the WeekEnd 453 deﬁnitely packs a punch!

FOR A UNIQUE LAYOUT, TAKE A LOOK AT TIDALFIT FROM ARTESIAN SPAS

TidalFit is the swim spa brand of Artesian Spas and the company produce a variety of models to suit a range of budgets and needs.

At the top end of their range, you’ll ﬁnd the DT (dual temperature) models and then something a little different in the DTL.

The DTL range consists of two models –the DTL-6 and DTL-8. Unsurprisingly, the DT also stands for dual temperature, but these two swim spas are arranged in an ‘L’ shape.

Choose from either a 6ft hydrotherapy spa (featuring 35 Stainless Steel Patented Helix Jets) or 8 ft model (with 61 or 45 Jets), and the company seamlessly integrate both into one amazing unit.

Each combine Tidalﬁt’s world-class 14ft exercise pool with Tidalﬁt’s Quad Adjustable Swim Jet System as standard.

Also standard is a super high efﬁciency 24hr Whisperpure™ circulation system, plus a smart energy insulation package consisting of highly insulating Icynene™ brand foam located in the space between the maintenance-free cabinet and the structure which combined with a heavy-duty thermal

spa cover, works to ensure the best rate of heat retention available.

There’s also plenty of other options that can be added to enhance each swim spa.

These include water puriﬁcation options for both the pool and spa sections, DynaBrite LED lighting and an Aquatic Training System for the pool area, plus a BBA™ fully integrated Bluetooth sound system, cabinet speakers, and worldwide Wi-Fi spa control app module for the spa side.

THERE’S A PLATINUM SPAS SWIM SPA FOR EVERYONE

Superior Wellness’ Platinum Spas brand delivers some fantastic swim spa models across their range, all of which represent some great value for money options for entrylevel purchasers through to dedicated swimming enthusiasts.

Coming in at a compact 4.5m in length is the Platinum Spas Eros swim spa. While it’s not the smallest in the range, it is the perfect pool for youngsters to learn to swim in, and is ideal for family fun and ﬁtness, as well as low impact walking exercise.

With its compact dimensions, as well as being a swim spa, it delivers just like a hot tub. It has everything for family enjoyment; that special place to relax and a great place for swimming or for weightless exercising against the adjustable counter-currents.

Moving to the largest in the range, there’s the 5.9m Helios that includes four seats and one lounger. The spa is split into two sections – a spa end for relaxation and a swimming end for training and workouts. Both ends can be used at the same time too, so you can share the experience with friends and family.

The spa end is the perfect space for up to three adults, and has powerful hydrotherapy jets, a waterfall and a LED lighting system.

...more serious swimmers and athletes will want a much more complete set of features and budgets will reﬂect this”

Using three 3hp pumps in the swim section, the jet pressure is powerful, and the hydrotherapy is exceptional. The jets are also adjustable, so each user can adjust relating to their preferred requirements.

It also features a Superior Aristech Acrylic ﬁnish and the Ozone system, as well as cutting-edge pump and heating technology. This ensures that the Helios swim spa is not only high-tech, but also economical to run.

SAY HELLO TO DUAL TEMPERATURE SWIMSPAS FROM JACUZZI®

The all-new Jacuzzi® J-19DT™ Dual Temperature swim spas allow users to swim, soak and unwind – all in one place – providing the ultimate versatility for any wellness journey.

Featuring separate swim (28°C) and massage (38°C) zones, the two J-19DT™ options provide the perfect temperature for every activity. The double lounger design ensures unparalleled relaxation in the spa end while the newly redesigned swim area offers maximum space for an exceptional swimming experience.

Improved swim system plumbing, ten swim settings with the Gecko control system, and the standard swimbar on all PowerActive™ and PowerPro™ models take performance to the next level. Plus, upgraded hydromassage plumbing delivers powerful, uncompromised relaxation.

The new J-19DT Power Pro™ is a dualzone masterpiece that redeﬁnes versatility and according to Jacuzzi®, features the industry’s most advanced swim system. Fully adjustable PowerPro™ PX swim jets deliver a robust current tailored to swimmers of all levels, from beginners to elite athletes – as demonstrated by British Olympic Champion Adam Peaty, OBE.

Inspired by the award-winning Jacuzzi® J435™ hot tub design, the spa zone includes two ergonomic loungers, revolutionary infrared technology and advanced full-body hydrotherapy.

The new J-19DT PowerActive™ creates the ultimate family wellness retreat.

Patented PowerActive™ AX swim jets produce a smooth and spacious current, perfect for low-impact workouts, ﬁtness routines and recreational swimming. As with the PowerPro™ model, the spa zone features two ergonomically designed loungers, advanced hydromassage options, and

RIGHT: The 5.9m Helios swim spa from Paltinum Spas

BELOW: The TidalFit DTL6 is one of two dual temperature swim spa models from the brand

groundbreaking infrared technology, delivering an unrivalled hydrotherapy experience.

WELLIS’ W-FLOW MODELS PROVIDE COMPREHENSIVE WORKOUT OPTIONS

Wellis have had great success with their swim spa range which has been enhanced regularly over recent years and their current entry-level model – the Danube – has beneﬁtted greatly from both design and technology improvements.

The base model is available in two configurations and can be powered by either Riverjets or a W-Flow System. For users wanting more power and flexibility, the latter is the better choice. The impressive W-Flow System allows users to choose between sixspeed levels from the slowest, most comfortable ‘floating’ setting, right up to the hardest exercise workout.

Similar to a modern treadmill, users can predeﬁne the swimming speeds one after another, so slower stages can be inserted between swimming sprints and custom workouts can be created.

The width of the water ﬂow within the WFlow is only 50-60cm and the ﬂow rate can be adjusted between 0.4-2.5 km/h.

The inside of this model was simplified too. Lines are much cleaner and more modern looking, plus the space was optimised. Wellis have included two massage seats which are located either side of the water flow system, meaning owners can use the Danube for professional swimming and to enjoy a relaxing massage too. Rear filter housings have also been placed at the end of the swimming area

so that the active water area is more than 50cm wider than before.

If a larger model is needed that still features a W-Flow System, joining the Danube this year is the Amazonas Life Grand Prix swim spa – a model that is ideal for swimming enthusiasts seeking both ﬁtness and family relaxation. With its spacious 2.5m width and 5.5m length, its design accommodates two seats with double the amount of jets of the Danube. With and an impressive 8,000 litre water capacity, it offers a stylish, updated design and a prestigious look.

LATEST CATALINA MODELS DRAW ON THEIR HERITAGE

Catalina Spas™ launched their all-new Mardi Gras party / swim spa in spring 2023 and followed up with a new Amazon model. The original Mardi Gras was the UK’s ﬁrst allseater party / swim spa and over the years many hundreds were sold, with the model made popular by its size and unique seating, exercise facilities and the low water volume meaning lower running costs.

The new Mardi Gras was the ﬁrst swim spa produced from the brand’s very own factory and features a number of changes and upgrades.

Measuring 3,850 x 2,280 x 1,300mm and with a water capacity of 5,500 litres, the latest Mardi Gras model features three adjustable River Jets and can seat up to 11 bathers. With an RRP which has crept up to £18,995 inc. VAT, it still represents some serious value for money.

If a larger model is required, the 16ft all new, single temp Amazon swim spa is ideal for both family use and for swimming enthusiasts.

Measuring 4,880 x 2,260 x 1,400mm and with a water capacity of 8,000 litres, the Amazon takes inspiration from the original model and users can enjoy personalized hydrotherapy with three adjustable river jets, complemented by the mesmerizing ambiance created by two LED water blades. Elevate the experience further with crystalclear audio from two pop-up speakers and a subwoofer, all powered by the integrated Bluetooth™ music system. Ensure purity with both ozone and UV puriﬁcation, all while LED lights in and around the spa set the perfect mood. SPN

LEFT: The all-new Jacuzzi®

The Amazonas Life Grand Prix – a model that is ideal for swimming enthusiasts seeking both fitness and family relaxation

Solutions To Minimise Chlorine Use In Water

Whether it’s through the use of salt chlorinators, UV or Ozone or other systems, when it comes to the treatment of pool and spa water, there’s now a number of tried and tested non-chemical based, low and no chlorine solutions on offer. With options often providing a gentler wet leisure environment, it’s easy to see why they are increasingly popular. This issue, we take a closer look at a few of the available options

Lowering chlorine use in wet leisure settings, and in some cases, removing it completely, has been a priority across both private and public environments and provides a welcome answer to help eradicate the unwelcome odours we all too often associate with water that’s been treated with the chemical. That’s not to say chlorine no longer has a role – far from it.

However, the minimisation of its use follows years of feedback from users, owners and operators spanning both the domestic and commercial sectors. There was a clear want for its reduction and this meant industry innovators were tasked with producing safe, dependable and effective disinfection solutions that don’t rely on large doses of chlorine for the sanitisation of water. As a result of this challenge, there is now a wide range of treatments available which do exactly that, with UV systems and salt chlorinators leading the pack of the many alternatives that are on offer.

To varying degrees, chlorine will always have its place in the sanitation of pools and spas, but reducing its use provides some highly appreciated, additional beneﬁts, meaning many pools across the UK have already adopted, or are at least looking at, alternative approaches to water sanitisation.

With numerous solutions and systems on offer, here, we take a look at just some of the options that are available.

AQUASERVICE’S VERSATILE UV SYSTEM IS SUITABLE FOR ALL SWIMMING POOL TYPES

According to Norwegian manufacturer Aquaservice, their AquaUV Pool Line UV System (AQS-PL UV for short) is the most versatile swimming pool UV system on the market. It’s designed to treat all types of pool usage, from heavy use children’s swimming pools to low use diving or private pools.

Of course, each type of usage requires a different type of UV set up – no one type of UV system will ﬁt all swimming pool usage and requirements – and systems are offered with ﬂow rates ranging from 6m3/h to 580m3/h and the total maximum lamp power output spanning 0.4kW to 8.4kW. For ease of installation, connections can be amended to suit pipework and in addition, having the ability to supply bespoke options when required, makes it one of the most unique swimming pool UV systems available on the market.

These medium pressure UV lamp systems offer a minimum lamp life of 10,000 hours, and as with the company’s Pool Line ﬁlters, they have been designed to comply with NSF 50 standard. Other features of the AQS-PL UV systems include:

• Corrosion Resistant Epoxy Coating

• Power Stepping

• Manual or Automatic wiper

• BUS connection option

• Temperature Switch or Sensor.

AQS-PL UV systems emit polychromatic UV radiation. The multiple wavelengths in the medium pressure UV lamps destroy the molecular bonds of combined chlorine/chloramine compounds. Therefore, UV removal of chloramines is a non-chemical and reliable method to control combined

By Jon Wadeson

chlorine in swimming pools. In addition, each system is sized and designed to achieve a minimum of a 99.9% reduction of cryptosporidium, therefore guaranteeing safe bathing for all with no risk of chlorine resistant organisms surviving in the water.

SOLUTIONS FOR PURE AND PERFECTLY DISINFECTED WATER

Since its inception in 2000, BIO-UV Group has grown to become one of the leading companies in water disinfection and treatment systems. From their base in France where they design and manufacture their systems, the team has built a strong partnership network across the world. Here in the UK, their partner is AstralPool who exclusively distribute the innovative and environmentally friendly solutions which are based on UV-C, Ozone and AOP technology. Each one is ecological and an automatic process that requires minimal addition of chemicals to the pool. This guarantees well-being and bathing comfort by reducing irritation.

For the residential market, BIO-UV has developed and launched the innovative concept, O’Clear. Easy to install and compatible with all types of pools, it is a unique water treatment system that guarantees a perfectly disinfected pool without the addition of chemicals. The water circulates inside a reactor where the UV-C, associated with O’Clear’s exclusive electrodes, eradicates all microorganisms and thus ensures ﬂawless results with only 0.5g/litre of salt.

Aquaservice claim their AquaUV Pool Line UV System is the most versatile swimming pool UV system on the market

AstralPool UK exclusively distribute BIO-UV solutions which are based on UVC, Ozone and AOP technology

INTRODUCING THE MR LIGHT INVERTER SALT CHLORINATOR FROM CERTIKIN

Enjoy a healthier swim with Mr Light. Supplied by Certikin, it proudly boasts a 1,000pppm salt level – believed to be the lowest salinity level in the UK market. This reduces salt usage, promotes sustainability and extends the lifespan of pool equipment with three-times lower salt levels.

Using the latest in Inverter technology, Mr Light automatically adjusts the output current to prevent over chlorination. Thanks to the 120% hyper disinfection boost mode, Mr Light enables the pool to recover fast from challenging conditions, whether it’s raining or sunny, party or holiday. The ingenious technology enables seamless interaction with variable-speed pumps and other devices to make it super user-friendly and efﬁcient.

The stylish touch screen controller includes an inbuilt peristaltic pump for pH dosing, an integrated pH and temperature probe, ORP probe and a ﬂow switch, all housed within the salt cell for monitoring the water quality.

It has self-cleaning cycles of 2, 4 or 6 hrs (4hrs default) and an average cell life of 10,000 hrs. Both the controller and salt cell carry a ﬁve-year warranty.

Mr Light is the perfect partner for Certikin’s new inverter pool pump with them designed to work seamlessly together to optimise energy consumption and reduce electricity costs.

MR PURE INVERTER SALT CHLORINATOR FROM OCEA UK

With Mr Pure, Ocea UK have the solution to entice pool owners and builders away from the traditional method of adding chlorine directly to pool water. With its sleek touch screen display, Mr Pure produces pure, clean, high-grade water and on average, users will

only need to add salt to the pool twice a year, saving on storage space, hassle and expense!

This latest water treatment innovation adopts an advanced PID algorithm for accurate control of chlorine production and pH regulation. No more worries about red eyes, dry hair, or rough skin – just refreshing water that’s perfect for anyone, especially those with sensitive skin. Mr Pure releases users from any concerns about swimming in saltwater or forgetting to add salt in time, thanks to Inver Turbo technology. It is even able to operate at low salt levels of 1.8g/L, beneﬁting both swimmers and pool systems. Features include an on-screen display that lets you know when the water is perfect for swimming, so there are no guessing games. The Turbo boost option comes in handy when owners want to speed up the process so that they can swim right away,perfect for when excited children are waiting to jump in the pool! The system only produces chlorine when required, saving costs and energy in running a pool and keeping it fully sanitised. Supplied with pH and ORP probes as standard, installation is so easy and Ocea UK offer full training at their Trade, Learning and Distribution Centre in Oxfordshire.

PURIQ – A 100% ECO-FRIENDLY UV WATER PURIFIER

Available through Fairlocks Pool Products, the PURIQ UV-C Bright Series water puriﬁer offers optimal technology for crystal-clear water without the need for multiple chemicals and is kinder for water users too.

Featuring the latest technology, the lamp placed in the pool water emits a very powerful UV-C light with a wavelength of exactly 253.7nm that kills practically all bacteria, viruses, algae and moulds. Using a UV light provides non-chemical disinfection, enabling

effective primary control over waterborne bacteria, which can beneﬁt both public and private pools.

This results in optimal purification, reducing the need by 80% of chlorine and other chemical usage. The PURIQ UV-C system, with its 100% eco-friendly operation, provides more natural, healthier water. The extra wide SAE 316 stainless steel housing extends the time the water is exposed to the strong UV-C radiation while also minimizing the pressure drop as the water passes through. Not only is the system better for the pool and pool user, but the environment benefits too. There is a significantly reduced number of toxic by-products produced by the UV purifier ensuring that the end response is a cleaner, safer environment for all.

Thanks to the polished interior, there is virtually no adhesion of contaminants to the walls, which boosts the effectiveness of the UV-C radiation by a further 35%. The PURIQ UV-C water puriﬁer contains intelligent electronics that signals an alert when it is time to replace the lamp, which ensures that the unit is always operating at peak efﬁciency and the water is clear. This way, the customer always has a perfectly working device they can rely on.

PRECISE DESIGN WITH GREAT PERFORMANCE – EMAUX’S NANOTECH UV-C TIMER

New for the 2025 season and available to the trade through SCP UK, the NanoTech UV-C Timer disinfection system from Emaux Water Technology offers a non-chemical approach to water sanitisation and includes an integrated adjustable timer which accurately monitors the operating hours of the UV-C lamp.

Operated using a user-friendly control pad

Certikin’s Mr Light (left) and Ocea UK’s Mr Pure (above)The PURIQ UV-C Bright Series from Fairlocks Pool Products

Aquafilter POOL LINE

Made in Norway

• Filters down to 5 micron

• Self Cleaning Automatic Filter

• No media

• No waste products

• Low head loss

• HDPE housing

• Low weight

• Corrosion free housing

• Continuous flow

Spesifications

AF355-PL 27 m³/h43 m³/hDN80 or DN10010 bar4001450 1

AF560-PL 54 m³/h107 m³/hDN100 10 bar6001850 1

AF630-PL 90 m³/h175 m³/hDN150 10 bar7002200 1

Aquafilter

PoolPolisher

For maximum efficiency:

Combine the Pool Line filter with the PoolPolisher filter

The Aquafilter Pool Polisher is a simple filtration solution for pools. Made from HDPE (High-Density Polyethylene), it works seamlessly with the Aquafilter Pool line filter. It effectively ensures flow and optimal treatment during backflushing and servicing.

The two-stage filtration system provides consistent 5-micron filtration, which helps maintain low turbidity in the pool water, ensuring it stays clear and clean. This is particularly important for pools that require efficient filtration during maintenance periods, such as servicing, which typically disrupts water flow.

Partial Flow Filter:

The filter is designed to treat a partial part of the total flow.

Polishing the Water Over Time:

The filter is for finer filtration at a later stage in the filtration removing finer particles after the bulk of the filtration has been done.

Depth Filtration:

The filter material works by capturing particles within its depth, rather than just on the surface. This type of filtration allows for greater dirt-holding capacity and is effective at removing a wide range of particulate sizes.

Servicing/Maintenance for Main Pressure Filter:

The partial flow filter is used in conjunction with and during the servicing of the Pool Line Filter. It helps ensure continued filtration when the Pool Line filter is undergoing maintenance.

Easy to Change Filter Bags:

The design includes user-friendly maintenance features, such as easily replaceable filter bags, which reduces downtime during maintenance.

5 Micron Recommended Filtration Grade:

The filter is recommended to have a 5-micron filtration grade, which means it’s designed to filter out particles that are 5 microns or larger in size. This is effective at removing fine sediment, dirt, and some microorganisms.

Triple action Pool Line filter

with time clock digital display, this slim unit features a durable stainless steel AISI 316 housing, with mirror-polished interior that increases the UV-C radiation reflection, thereby increasing the efficiency by up to 35%. A high quality quartz sleeve ensures nearly 100% transmission of UV-C at 254nm. It offers protection against air and water flow, breakage, and temperature fluctuations.

With max ﬂow of 25m3/h, max pressure of 3 bar and connections in 1.5‘/50mm or 2’/63mm, the NanoTech UV-C Timer is suitable for use in above-ground and residential pools with up to 75m3 of water.

The unit’s professional quality UV lamp offers a lifetime over 9,000 (and up to to 12,000) hoursand provides a digital alert when the lamp needs replacing.

With easy installation and maintenance, it reduces the use of chlorine by up to 70%, plus water renewal is also reduced due to fewer by-products formed.

LIGHTHOUSE AND BAYROL –CHEMICAL SOLUTIONS PLUS A LOT MORE TOO!

For many across the industry, BAYROL needs no introduction. A true expert in the ﬁeld of water treatment for swimming pools and spas for over 65 years, BAYROL offers everything needed for the care of pool and spa water: from simple basics to the

BAYROL’s Automatic SALT system – a smart salt electrolysis product from the research and development work of BAYROL Technik. It regulates the production of chlorine from the salt dissolved in the water, and it also measures and regulates the pH, which ensures a safe, sustainable and more environmentally friendly treatment of pool water, providing optimal water quality without the risk of overdose.

The Smart&Easy technology makes Automatic SALT an ideal companion to provide an undisturbed and safe bathing experience. The large display and the menu navigation, which is easy to understand even for inexperienced users, leave nothing to be desired in terms of operation. Automatic SALT has intelligent software functions, such as the initial commissioning wizard, which helps users to deﬁne the essential parameters of the device easily. In operation, this also gives useful tips

so owners have their pool water quality fully under control, even on the go!

ART – GAFFEY’S LATEST INNOVATION IN ELECTROCHLORINATION

New Adaptive Response Technology, ‘ART’ for short, is set to be a gamechanger for electrochlorination water disinfection.

This innovative technology, developed by Gaffey, is built into their range of Hyprolyser® iSEC® electrochlorination systems and allows them to adjust to constant changes in both environment and site conditions. Addressing increasing climatic inﬂuences such as high ambient and warm feed water conditions in plantrooms and overcoming ﬂuctuating water pressures is essential to manage during daily operations.

Hyprolyser® ART can detect the smallest irregularity within its process and automatically self-regulate to function seamlessly, ensuring continual and consistent chlorine generation for effective and efﬁcient chlorination.

with an integrated Wi-Fi

access to the pool water smartphone or any other internet-enabled device.

reading of the measured

New for 2025, the NanoTech UV-C Timer disinfection system from Emaux

Gaffey’s New Adaptive Response Technology, ‘ART’ for short , is set to be a gamechanger

BAYROL’s Automatic SALT system – a smart salt electrolysis product –is available through Lighthouse

THE ALTERNATIVE APPROACH

...the

On-screen annotations instruct remedial actions to be taken by the operator to avoid unnecessary interruption to chlorine generation.

Gaffey are also simultaneously launching their new Hyprolyser® iSEC® High Capacity Skid 250-2000 system, where a single unit alone can deliver up to a huge equivalent of 291 litres sodium hypochlorite 14% per day to treat up to 4,000m3 of pool water for example. Hyprolyser® electrochlorination systems are fully compliant under HSE/BPR and deliver real COSHH and cost saving beneﬁts.

Generating non-hazardous <1% sodium hypochlorite from salt, water and electricity, Hyprolyser® is one of the most sustainable water disinfection solutions available for pools today.

Managing Director Phil Gaffey said in a statement: “We are proud to be more than just manufacturers in the water disinfection industry. Pushing technology forward is always our goal and by listening to industry feedback combined with improving technology, our inhouse technical team have made some great strides that will make a real impact for our customers all around the world.”

THE RESILIENCE E NATURAL SALT CHLORINATOR – A SOLUTION FOR MODERN POOLS

Available through Plastica, the Resilience E Natural Salt Chlorinator offers crystal clear, safe and inviting water, without the hassle of harsh chemicals and frequent maintenance. Designed with practicality in mind, this compact, all-in-one, inline unit makes installation straightforward. Maintenance is equally simplistic, thanks to a removable pullout electrolysis cell, enabling easy descaling for the pool owner.

The Resilience E is equipped with a userfriendly digital display that indicates the various chlorine output levels and alerts for low salt levels. Maintenance alerts notify when the cartridge needs cleaning or is nearing the end of its lifespan. With options making it ideal for pools of up to 150m3, the Resilience E has been designed to work with variable speed pumps and includes a pre-supplied cleaning vessel for easy maintenance. Other features and beneﬁts include:

• Easy installation, arguably the simplest in the market, making it ideal for private pools

• Bi-directional ﬂow sensor and double ‘low ﬂow’ protection

• Full range input voltage automatically accepts 110 or 220V

• Built-in salinity and water temperature sensors

• All major components are replaceable, supporting long-term use.

Manufactured using IP-66 rated materials, making it weatherproof and suitable for both indoor and indoor installations, the Resilience E is a durable and reliable salt chlorinator. It is designed with reverse polarity that allows self-cleaning and plugs into a standard outlet. The Resilience E offers an efﬁcient, lowmaintenance solution for maintaining pool hygiene. Its combination of reliability, ease of use, and reduced chemical exposure makes it a suitable choice for residential pool owners seeking a modern alternative to traditional chlorine systems.

IS THIS THE BEGINNING OF THE

END OF CHLORINE IN POOLS?

UK-based Origin Aqua’s Mineral+Biome® is a chemical free, biological ﬁltration system scientiﬁcally proven to kill pathogens naturally, without using chlorine or other harmful disinfectants.

The modular, automated natural pool ﬁltration system, delivers outstanding mineral quality water, while typically using 50% less energy and wastewater vs. traditional ﬁltration

This nature-based solution, designed and developed in the UK, can be ﬁtted to virtually any new build or existing swimming pool, rendering use of chlorine or other disinfection chemicals

In addition to operating without chemicals (or aquatic plants), the includes innovative features such as IoT touchscreen automation, air

assisted auto-backwash, ﬂow / pressure sensing and a modular fully recyclable onepiece ﬁlter housing.

Origin Aqua CEO, Andrew Cox, said: “Our scientiﬁcally proven, nature based technology gives customers the opportunity to experience luxury, mineralised water instead of a soup of chemicals.

“The Mineral+Biome® system represents the future of pool ﬁltration – delivering superior water quality, with the healthiest, most advanced and environmentally friendly system available on the market today.”

Origin Aqua has spent ﬁve years developing the Mineral+Biome® and the company has over 100 systems running (including the largest indoor natural pool in Europe). SPN

Origin Aqua’s Mineral+Biome®

Available through Plastica, the Resilience E Natural Salt Chlorinator offers crystal clear, safe and inviting water

Perfect Poolside Testing Solutions

Thanks to a number of innovations, water testing is now more sophisticated, accurate and convenient than ever before. It’s a sector which has embraced the latest available technology whilst still producing more low-tech options too. The result is a wide range of poolside equipment that has revolutionised the testing process within pools, spas and more. With accuracy and ease of use always a high priority, we take a closer look at some options

By Jon Wadeson

Asafe environment is an essential and expected part of any wet leisure experience, and that obviously extends to the water found in pools, spas, hot tubs and more. It needs to be safe, clean and clear, but the last thing owners and operators want to do is spend an excessive amount of time and energy monitoring and testing the water found in these products, let alone doing it with any inaccurate equipment.

Fast, user-friendly and accurate testing products are therefore a godsend. Not just for highlighting any safety issues, but also for ensuring equipment is operating within the correct environment too, as if not, there’s potentially a heavy price to pay for new equipment further down the line.

User safety is of course at the top of every pool or spa owner’s list though, and with commercial facilities experiencing much higher bather loads than their domestic cousins, owners and users need to be able to trust that the cooling waters that are being enjoyed are safe and in the best possible condition. Considerable time and money has been spent on developing more efﬁcient and user-friendly testing systems, and that’s not surprising, as for commercial operators in particular, where there is the possibility of infection, only the latest products and best procedures are good enough. Down time as a result of poor procedures invariably leads to bad press, and this often spells disaster to a facility’s reputation, with guests then voting with their feet – a scenario to be avoided at all costs!

Regardless of size though, wet leisure products are always major investments for their owners and they need to be kept in the best possible condition – and that includes the water within them. Therefore, having the correct products to test water conditions is essential and needed on an ongoing basis and in this issue, we take a closer look at just some of the testing solutions that are currently on the market.

BAYROL TAKES THE GUESSWORK OUT OF WATER TESTING AND TREATMENT

Available through Lighthouse, the BAYROL Electronic Pooltester measures seven essential water parameters: pH, free and total chlorine, bromine, alkalinity, stabiliser (isocyanuric acid) and active oxygen (mps). After carrying out a one-time zero and adding the tablet reagent, the results are displayed in record time – from a few

...wet leisure products are always major investments for their owners and they need to be kept in the best possible condition –and that includes the water within them. Therefore, having the correct products to test water conditions is essential”

seconds to just two minutes, depending on the parameters measured. No more interpreting results on test strips or colorimetric test kits that can be difﬁcult to read when there are variations in light levels. With the BAYROL Electronic Pooltester, users get an immediate, reliable and accurate digital reading of the pool’s water parameters. And should it drop into the water, the Electronic Pooltester is safe – it’s fully waterproof and won’t sink!

The Pooltester can be used with the BAYROL MyPool Expert app which interprets the results and provides a customised diagnosis advice on exactly what is required to bring the water back into balance and

Available through Lighthouse, the BAYROL Electronic Pooltester measures seven essential water parameters

WATER TESTING

within the recommended parameters. The Pooltester links by Bluetooth to the app which is run on a phone, tablet or computer. Simply upload the test data, input the pool parameters: size, sanitiser, filtration run time, temperature etc; and a full analysis of the results is provided in the app. The report even details the quantity of any products required to fix any issues in the pool size specified, taking the maths out of water treatment and making pool water treatment simple and easy for all.

LOVIBOND® MD150 PHOTOMETER –SETTING A NEW STANDARD IN WATER TESTING

Since its ofﬁcial launch in February, the Lovibond® MD150 has quickly become the go-to solution for reliable, on-the-go pool and spa water testing. Compact, rugged and refreshingly intuitive, the MD150 is designed to simplify multi-parameter testing without compromising on accuracy.

The MD150 is built for real-world use. Whether you’re testing pool water, spa systems and more, this rugged device offers

fast, accurate measurements of key parameters including chlorine (free, total and combined), bromine, pH, alkalinity, calcium hardness and cyanuric acid. The advanced optical system ensures laboratory-level accuracy, while smart features like One-TimeZero (OTZ) reduce measurement time and streamline workﬂows.

Designed with the user in mind, the MD150 features a bright, colour-coded backlit display and an intuitive icon-based interface, guiding users through tests with ease. With IP67 waterproof protection, a robust exterior and grippy rubber sides, it’s just as comfortable for use by the poolside or out in the ﬁeld.

But where the MD150 truly shines is in data handling. Equipped with NFC connectivity to the AquaLX® app and USB-C integration with Lovibond®’s Data Expert platforms, users can export results in seconds. Store up to 100 readings directly on the instrument and effortlessly transfer them to Excel or other systems for easy reporting and archiving.

Each MD150 kit arrives complete with all the reagents, cuvettes, accessories and a newly designed carry case that keeps everything secure and protected on the go.

In short, the MD150 is more than just another photometer, it’s a complete, futureready testing solution built to meet the demands of modern water professionals.

SAVE TIME AND MONEY WITH THE LILIAN PHOTOMETER WAVE

The LILIAN Photometer Wave for analysing water in pools and spas has been available since the beginning of last year. Based on using the company’s innovative and unique SensoSticks, the measurements of e.g. free, bound, total chlorine and pH value can be determined simultaneously within only approximately 60 seconds. Of course, other pool-relevant parameters are also available –eight in total – and the testing data is all stored digitally.

The detection accuracy for both chlorine and pH is with a tolerance of only +/- 0.03 –a value which the company advise is unique on the market in on site analysis, taking into account the short time required. In addition, there is no need for any kind of sample preparation, as is common with conventional photometers. A fact which saves both time and money!

In addition, users can use the LILIAN app and manager free of charge for digital data processing.

So who is the new LILIAN Photometer Wave designed for? Well, the target group is diverse – all those who do not analyse water samples on a daily basis but value the highest level of detection accuracy and objective documentation are eligible.

These include, for example, health authorities, hygiene institutes, laboratories, pool builders, service technicians, managers of communal facilities, service providers and more.

Since its official launch in February, the Lovibond® MD150 has quickly become the go-to solution for reliable, on-the-go pool and spa water testing

The LILIAN Photometer Wave for analysing water in pools and spas has been available since the beginning of last year

Compared to the company’s established Photometer Pro, the cost price of the new Photometer Wave is signiﬁcantly lower, but the cost per analysis is only slightly higher, with SensoSticks available in packs of ﬁve pieces.

ENJOY ACCURATE POOLSIDE TESTING WITH A SOLUTION FROM LAMOTTE

LaMotte offer a number of solutions for testing and last year introduced their ColorQ® 2x PRO 7. This waterproof Bluetooth® handheld pool and spa professional photometer directly measures free chlorine (DPD), total chlorine (DPD), bromine (DPD), pH, alkalinity, calcium hardness and cyanuric acid (Stabiliser) directly on a digital display. The handheld meter is easy to use and features economical liquid reagents that measure 144 tests per test factor for free chlorine, total chlorine (bromine) and pH. The alkalinity, calcium hardness and cyanuric acid tests are measured by using the TesTabs® tablet method and includes 100 tablets for each test. The ColorQ® 2x eliminates the need to determine slight colour variations visually, thus taking the guesswork out of poolside water analysis.

The photometer, testing reagents and photo-diagrammatic trilingual instructions (English, Spanish, French) are packaged in a convenient carrying case for on site testing.

LaMotte’s ﬂagship model is their innovative WaterLink® SpinTouch™ photometer which does all the pool and spa water testing wherever it is needed – both in the ﬁeld or in the store.

The genius lies in the disk; produced in a clean room environment, freeze dried reagents are added to the disk and react with the water sample when inserted into the SpinTouch™ and rotated at high speeds.

After just 30 seconds for a 3-parameter test (FCL, TCL and pH) and 60 seconds for a full suite of ten parameters, the results are displayed on screen in PPM.

For service technicians, the SpinTouch™ can be used poolside to monitor and thereby correctly treat the water in a pool. For pool operators, the 3-use disk is used to test free chlorine, total chlorine and pH up to three times in a day, with all results automatically stored on the device.

ENJOY LIGHTNING FAST POOL AND SPA WATER RESULTS WITH LUMISO

The Lumiso Pooltest range from Palintest offers the most advanced photometric technology to deliver accurate, clear water quality results in a matter of minutes. Available from leading distributors including Certikin, Golden Coast and SCP UK, the brand is used by both pool owners and professionals around the world.

For outdoor pools there is Lumiso Pooltest 3, while Lumiso Pooltest 4 is ideal for measuring the basic parameters of chlorine, pH, bromine and alkalinity in spas and indoor pools.

For service engineers and pool managers, there is the Lumiso Pooltest 6, which provides basic readings alongside additional tests for cyanuric acid and calcium hardness, enabling a complete water balance calculation.

The latest addition to the range is Palintest’s Lumiso Pooltest Expert – a multiparameter benchtop photometer designed as an all-round solution for pool and spa water testing needs. From pool managers through to professional engineers, this photometer is suitable for testing multiple times daily, quickly and accurately across key and troubleshooting parameters.

With a large touchscreen interface and simple to follow onscreen instructions, the Lumiso Pooltest Expert can be used with little or no prior training. Its robust construction and IP67 waterproof design ensures it can be used in situation, in any environment – even with wet hands – and comes in a case made from recycled material.

Lumiso Pooltest Expert beneﬁts from easy results retrieval and data traceability for audit compliance purposes via USB connectivity through the Palintest Connect platform. With 35 tests, routine and troubleshooting testing is made easy, with quick and accurate results including test data, user labels, and notes for audit and compliance purposes.

INNOVATIVE PHOTOMETRIC POOL WATER CONTROL WITH CLOUDBASED DATA MANAGEMENT

With the proven PoolLab 1.0 ® photometer and its successor model, the PoolLab 2.0 ® , users can benefit from the advantages of Water-i.d.’s successful water testing concept. Both devices are waterproof and therefore perfectly designed for use near water, a manageable number of just six or nine buttons makes operation simple and intuitive thanks to the enclosed multilingual instructions.

After taking measurements, to get results, simply login to the free access to the inhouse LabCOM® cloud service. Create an account, log in, select measurement sources and synchronise measurement data with the cloud – done! Users get a detailed overview of the condition of the pool water with the option to export and save all the information in the desired file format. The LabCOM®

ABOVE: LaMotte’s flagship model is their innovative WaterLink® SpinTouch™ photometer which does all the pool and spa water testing wherever it is needed

RIGHT: For service engineers and pool managers, there is the Lumiso Pooltest 6 from Palintest

WATER TESTING

software family consists of specially programmed versions for Windows®, iOS® and Android® as well as a web application for use in any browser. The PoolLab 1.0® offers the opportunity to determine 13 different parameters of the pool water. A total of three wavelengths are available for the measurement methods.

With the second generation of this product line, the PoolLab 2.0®, an extended selection of 24 measurable pool parameters is available which is realised by the use of four detectable wavelengths, as well as a highresolution 2.4-inch colour display. In addition, the cuvette consists of three separate measuring chambers that enable three parallel measurements to save valuable working time. Data transfer can be made by

Bluetooth® or Wi-Fi connection.

The free management of measurement data by the LabCOM® software family is one of the central points of the successful concept and is constantly being expanded with new or optimised functions.

HANNA’S COMPLETE KIT FOR TESTING WATER IN POOLS, SPAS , HOT TUBS AND MORE

The HI-971044C from Hanna Instruments is a complete kit containing an advanced portable photometer for the measurement of pH, alkalinity, free chlorine and total chlorine, plus cyanuric acid in swimming pool, hot tub and spa water.

At the heart of the kit is the HI-971044 photometer that has an innovative optical

system that utilises a reference detector and narrow band interference ﬁlters to provide superior performance in accuracy and repeatability. With no warm up time needed before taking a measurement, it also shortens the time taken for water testing. The advanced optical system features:

• An LED that generates very little heat

• An 8 nm narrowband interference ﬁlter that is accurate to +/- 1 nm and offers 25% increase in light efﬁciency

• A reference detector that modulates the voltage to LED for consistent light output

• A concave focusing lens that reduces errors from imperfections in the cuvette.

This compact, waterproof meter is extremely user friendly with a tutorial mode that walks the user graphically, step by step, in performing a measurement. The use of a backlit dot matrix LED allows the use of virtual keys which makes the operation of the meter very intuitive including selecting different methods, reviewing GLP data, recalling the last 50 measurements and customising the meter to user preferences.

HI-971044 is waterproof including the cuvette holder that is designed with ridges to protect the optical path from getting scratched by the cuvette and a protected battery compartment that holds three AA batteries.

The compact design ﬁts comfortably in the hand for use in the ﬁeld or on a table for benchtop use.

Users can select the use of powder reagents supplied in packets or the use of low cost liquid reagents supplied in a dropper bottle. SPN

The HI-971044 photometer has an innovative optical system and is at the heart of Hanna’s HI-71044C complete kit

With the PoolLab 2.0® photometer, users can benefit from the advantages of Water-i.d.’s successful water testing concept

Creating The Ideal Indoor Environment

Without effective ventilation and dehumidification, indoor pool and spa settings can suffer from overly humid conditions which can lead to condensation, mould, corrosion and even potential structural damage. For users, there can also be an uncomfortable environment to contend with too. So getting the conditions right is essential for both owners and users alike and in this issue, we take a closer look at some of the solutions on offer

By Jon Wadeson

Designing, creating and maintaining the perfect environment for indoor swimming pools of all sizes, along with spas, swim spas and even hot tubs is no easy task. It’s one thing ensuring the water is clean and heated to the desired operating temperature, but providing the correct atmosphere outside of the water is an entirely different challenge. Without providing effective dehumidiﬁcation and ventilation, problems can arise for both users and operators of the facilities, plus potentially, even the fabric of the building itself.

One of the most obvious issues is condensation, something which if not dealt with, will ultimately lead to damage of either the décor or even the structure of the building.

So it’s essential that an indoor environment should have a well-planned and appropriate dehumidiﬁcation and ventilation system which will provide comfortable conditions for swimmers, bathers, spectators and staff, plus just as importantly, one that also protects any building too.

As you would expect, it’s a specialist area, but thankfully there’s plenty of knowledge, advice and product choices available which will solve numerous operating challenges –regardless of whether it’s under the heading of ‘environmental control’ or just ‘dehumidification’ – and in doing so, will save energy and therefore costs for owners and operators, whilst also ensuring the longevity of the wider installation and its equipment. With the wealth of expertise that’s available in the sector, designers and installers should find that choosing the most energy efficient way to manage indoor pool and spa

environments, whilst satisfying building control regulations, isn’t as daunting a task as they had feared. In fact, creating the conditions for the perfect operating environment is now a breeze and in this issue, we look at just some of the solutions that are available for a variety of installations.

ECOR PRO – A STRAIGHTFORWARD, FLOOR STANDING SOLUTION

Anglo-Dutch company Ecor Pro have more than 40 years’ experience in the market and specialise in designing bespoke dehumidiﬁers to their customers’ speciﬁcations.

...it’s a specialist area, but thankfully there’s plenty of knowledge, advice and product choices available which will solve numerous operating challenges – regardless of whether it’s under the heading of ‘environmental control’ or just ‘dehumidiﬁcation’...

For the UK swimming pool sector, they currently offer a single style gravity drained compressor model which is available in two sizes.

The D850 offers 65 litres maximum extraction using 850W, has two fan speeds with 500m3/hr air volume capacity and operates at 49-51dB.

The D950 provides 85 litres maximum extraction using 1,380W, again has two fan speeds with 680m3/hr air volume capacity and operates at 51-53dB.

These compact, ﬂoor standing units (which should ideally be secured to a wall) have an operating range from 4°C up to a 40°C maximum room temperature.

Internally protected for use in swimming pool areas, these energy efﬁcient options offer optimum cooling and compressor operating times based on an internal microprocessor calculation to enhance performance. They feature a built-in humidistat to regulate the humidity level automatically with a range of between 4070%, plus there’s also an optional continuous running mode.

Controls are located on the top of each unit and there’s easy access to key parts from the rear cover. These include a simple gas recharge point to top gas levels over the lifetime of the unit, plus two washable air ﬁlters, although these should not need replacing for the lifetime of the dehumidiﬁer when handled carefully

MEACO’S RANGE OF STYLISH SLIMLINE WALLMOUNTED UNITS

MeacoWall is a range of wall-mounted dehumidiﬁers from humidity monitoring and control equipment specialists Meaco, and is part of its award-winning Platinum Range of commercial low energy products.

An advanced and stylish solution for humidity control where wall mounting is an important requirement, MeacoWall is available in three sizes – One, Two and Three – which extract up to 53, 75 and 95 litres of moisture per day respectively.

Anglo-Dutch company Ecor Pro offer a single style gravity drained compressor model which is available in two sizes

At just 220mm deep, these dehumidiﬁers are some of the slimmest wall mounting dehumidiﬁers on the market and as such will not protrude far into a room. Features include the incorporation of a DC fan motor that helps to reduce running costs and keeps noise levels very low, working at a level of just 46dB or lower, which is similar to the hum from a domestic refrigerator.

As a heat pump compressor dehumidiﬁer, all energy used in the drying process is sent back to the space thus delivering dry, warm air whilst keeping energy costs down.

A unique glass ﬁnish means they look great, coming in a white casing with either a white or black glass front panel that incorporates the light touch LED.

Installation is ﬂexible with the option of continuous drainage from either the right or left hand side of the dehumidiﬁer. An automatic hot gas defrost system allows use in spaces where heating is limited with continuous performance right down to 10°C. For swimming pool applications, the refrigeration coils are specially coated to ensure a long service life.

ENJOY THE SILENCE WITH OCEA UK’S INVERTER DEHUMIDIFIER

The ultra-silent, compact and energy saving Inverter Dehumidifier from Ocea UK operates using full Inverter technology, and being on average ten times quieter than traditional dehumidifiers, owners won’t even know it’s there. This sleek design can be installed floor standing or wall mounted and it comes with removeable feet to let owners decide.

Models available will remove from 40 litres all the way up to 80 litres in 24 hours so there is plenty of choice in this competitively priced range to ensure owners keep their pool environments condensation and damage free.

These full inverter-dehumidifiers are engineered to provide quiet operation along with full energy efficiency, and are recommended for both residential and commercial indoor pools. With a generous 7year warranty on the compressor and heat exchanger, they can be purchased with confidence. Order from stock held at Ocea UK’s headquarters in Oxfordshire with next day delivery available.

With a choice of smart and silent modes accessible through the handy touch control digital display, users have complete control and monitoring at their ﬁngertips. In addition, use is made even easier thanks to a downloadable app for Android and iOS that allows owners to view and select modes and see the operating options at the touch of a button and from the comfort of a couch or whilst on the move.

compact and energy

SUSTAINABLE

HEATING SOLUTIONS FOR DELTA AND VARIHEAT SYSTEMS

The Delta and Variheat ranges from Dantherm Group, available exclusively from Certikin, are purpose built environmental control units speciﬁcally designed for indoor swimming pools. They are different from most dehumidiﬁers as they remove moisture using an integral heat pump which also recover

CASE STUDY STAFFORDSHIRE SPA HOTEL UPGRADES AHU IN JUST 5 WEEKS!

In early June 2024, Recotherm were asked to quote on supplying an air handling unit (AHU) for a saltwater pool at Hoar Cross Hall, a prestigious, award-winning Spa Hotel in Staffordshire. Following extensive liaison with Recotherm’s in-house experts, the order for an Aeris 200 was placed with the request of a quick turnaround. Despite this being a bespoke horizontal unit, the Recotherm team ensured the unit was delivered, as requested, only ﬁve weeks after placing the order. This speedy response meant that the AHU was installed and up and running by the end of August, with an immediate improvement in the

saltwater pool hall atmosphere, resulting in a more comfortable and relaxing environment for bathers. Hoar Cross Hall were so impressed with the quick turnaround and quality of the results that they ordered a further two units; one for their hydrotherapy pool (an Aeris 100) and another for the Nordic heat and ice suite (an Aeris 200 which had to be delivered ﬂat-packed!).

Phil Murphy, Managing Director at Hoar Cross Hall said: “Our clients and staff were surprised, and delighted, by the instantaneous improvement to our saltwater pool hall environment. Due to this we realised we needed to upgrade the

experience in two further spa areas and were impressed with the turnaround times, professionalism and ﬂexibility of being able to build on site.”

MeacoWall is a range of wallmounted dehumidifiers from humidity monitoring and control equipment specialists Meaco

The ultra-silent,

saving Inverter Dehumidifierfrom Ocea UK operates using full Inverter technology

the latent energy which is used to assist the air and water heating. By utilising this method, a heat recirculation cycle is created, and energy costs are kept to a minimum. The potential energy savings are huge. In fact, compared to more traditional types of heating and ventilation methods, running cost savings of over 50% are achievable while corresponding CO2 emissions can dramatically reduce by up to 70%. Total of peace of mind is provided as commissioning is included as standard together with a two year on site part and labour warranty. The Variheat’s endless conﬁguration options offers the ultimate in ﬂexibility to suit every plant room.

They are designed to provide both air and water heating as well as dehumidification. Traditionally, these units operate with hot water supplied by a standard boiler. However, in alignment with Certikin’s commitment to renewable energy, they have established a collaboration with Global Energy Systems. them to offer high temperature air source heat pumps as a more environmentally conscious alternative for the heat source.

Designed to work specifically with the UK climate, they will outperform gas, oil and electric systems delivering over 300% efficiency. All models available offer remote monitoring which enables live performance data to be fed back to Global Energy Systems and if possible, issues to be fixed remotely.

TAKE CONTROL OF THE POOL ENVIRONMENT WITH CERTIKIN

2025 has seen Certikin launch their new range of air-to-air heat pump dehumidiﬁers. Manufactured by their long-term partner and industry experts, Dantherm Group, these have been introduced as a replacement for the outgoing wall mounted Vaporex dehumidiﬁers. They have a comparable physical size to the Vaporex models and minimal adjustments are required to the pipework connections, they have also been designed with a larger LPHW air heating capacity suitable for lower temperature hot water.

Compared to ducted system dehumidiﬁers these high performance and low cost units minimise the need for costly air distribution ductwork. Operating on the heat pump principle, these units recirculate pool air by removing the moisture content and delivering warm, dry air back to the pool hall. By working this way, they maintain a comfortable humidity, minimise condensation and keep heating costs as low as possible.

Removing humidity from the air with a heat pump enables the Dantherm dehumidiﬁer to absorb latent energy and return it into the pool hall air as ‘free’ air heating. Its heat pump technology converts 2.5kW to air heating for every 1kW electricity consumed! As well as the range of wall mounted units, the new range also features two ﬂoor standing models. All models come with a two-year manufacturer’s warranty.

ENJOY UNMATCHED HEAT RECOVERY PERFORMANCE WITH HEATSTAR’S PHOENIX EC

Heatstar produce some of the most energy efficient swimming pool environmental systems on the market thanks to investing in and adapting the latest energy saving technologies. These include variable speed fans (that only run when there is a demand), highly efficient plate-to-plate heat recuperators (which have no moving mechanical parts) to recover any energy that would typically be lost to outside, and heat pump dehumidification with active recycling to both air and pool water.

The Heatstar Phoenix EC is a hybrid heat recovery ventilation system that incorporates all three of these different, highly effective technologies, which work together to create what can be reasonably claimed to be the optimum environmental control solution for high speciﬁcation indoor swimming pools.

The technologies focus on three main areas: The fans used in the units, optimising heat recovery (‘free’ heat) and energy efﬁcient dehumidiﬁcation.

Firstly, the use of ‘Blue EC’ on-demand fan technology with backward

curved fans, the most energy efficient fans on the market. These digital fans utilise ‘autofan’ technology whereby the speed and power of the air-recirculation fan is managed automatically to enable significant energy savings whenever there is low demand. Secondly, Heatstar use cross-flow recuperators to optimise heat recovery. The recuperator passively conducts heat from the exhausted pool room air via a series of adjoining plates directly to the incoming colder fresh air. This process, in combination with the dehumidification heat pump, produces unrivalled levels of heat recovery.

Last, but by no means least, Heatstar utilise energy efficient dehumidification. The dehumidification heat pump within the Phoenix creates a cold evaporator coil to condense the moisture present in the air to reduce humidity levels. Through this process the heat pump absorbs both latent and sensible energy which is upgraded and recycled back into both the pool room air and pool water. Efficiencies of over 380% are possible through this process.

ITALIAN DESIGNED SOLUTIONS FOR POOL PROJECTS OF ALL SIZES

The Humidity Solutions range of small pools and wet area dehumidifiers are European manufactured and offer Italian design to provide innovative solutions such as the freestanding HiDew DVS vertical floor standing dehumidifier which is perfect for new and retrofit projects. The dehumidifier can easily be positioned at the poolside and is plug in and play with a drain required to remove the water extracted from the air.

Outside the immediate pool area, the DOS horizontal ceiling mounted unit becomes an option as does the DCS which is a wall mounted

The Heatstar Phoenix EC is a hybrid heat recovery ventilation system that incorporates three different, highly effective technologies

dehumidiﬁer which can be positioned in an adjoining technical room, with the pool air recirculated through the dehumidiﬁer using ductwork and grills which can be supplied as part of the installation kit.

Both dehumidiﬁers are out of sight for a client who doesn’t want the aesthetics of their carefully designed pool to be affected.

The ceiling and technical room units also allow for maintenance to be provided without entering the client’s area, reducing the impact on commercial operations or residential clients.

Outputs from 40 litres/day extraction and 350m3/hr air movement all the way up to 300 litres/day and 2,000m3/hr can be accommodated through ten units within the range. This makes it ideal for most residential or hotel pools and wet areas.

Commercial pools require different options where energy is a key factor, bringing in to focus running costs and efficiencies. Heat recovery, external condensers, static pressure available to facilitate ducting, remote control panels and temperature control are all components that can be included on Humidity Solutions’ commercial range of dehumidifiers which range from 100 litres/hr, 900m3/hr up to 3,000 litres/hr and 25,000m3/hr of air movement.

Modular dehumidiﬁers with heat recovery units can be supplied in two parts making installation and access easier in tight plant rooms or where access is limited.

RECOTHERM PROVIDE A BREATH OF FRESH AIR TO INDOOR PROJECTS

The use of air source heat pumps to heat the water in external pools is well established but many of these are not suitable for indoor pools and installers need to be aware of the pitfalls such as low operating ambient limits and instead go for high quality, performance systems for both air to water and air to air. Many of Recotherm’s domestic units are

designed around heat pumps providing the low pressure, hot water (LPHW) and the company has also recently developed their Aerum systems that provide fresh air dehumidiﬁcation combined with air to air heat via Toshiba heat pumps – ideal where additional LPHW plant is not needed or desired.

With Aerum, all the features normally associated with the Recotherm Aeris range (high build quality, state-of-the-art controls, pleasant fresh air environment in the pool hall and technical back up) are still there, but with the added advantage that the unit is a standalone package and can provide a

signiﬁcant amount of cooling in the summer if this is required.

Heat pumps may be a necessity in future and they can be a beneﬁt if owners want to reduce their impact on the environment, but they do operate at lower temperatures in a high temperature environment so heat exchangers and ductwork generally need to be bigger which can impact on space and capital costs.

To help customers make the correct choice of system, Recotherm have qualiﬁed, time served surveyors, designers and f-gas engineers in-house.

The company has also expanded their Service Department staff to take on the demand for service and commissioning visits. All of the ﬁrm’s engineers are fully trained on Recotherm AHUs and Trend controllers. Their new engineers also have a wealth of experience on competitors’ units, which allows the company to troubleshoot if someone has a problem whilst the Recotherm technical helpline provides off site assistance and on call resolutions when possible. SPN

Certikin H&V 01993 778855 www.certikin.co.uk

Ecor Pro 0191 816 2898 www.ecor-pro.com Heatstar 01983 521465 www.heatstar.com

Humidity Solutions 01372 571200 www.humiditysolutions.co.uk

Meaco (UK) Ltd 01483 234900 www.meaco.com

Ocea UK 01993 707910 www.oceauk.com

Recotherm 01527 894533 www.recotherm.co.uk

THIS: Heat recovery, external condensers, static pressure available to facilitate ducting, remote control panels and temperature control are all components that can be included on Humidity Solutions’ commercial range of dehumidifiers

Recotherm’s Aerum systems provide fresh air dehumidification combined with air to air heat via Toshiba heat pumps

RIGHT: Available from Humidity Solutions, the free-standing HiDew DVS vertical floor standing dehumidifier is perfect for new and retrofit projects

Pool Floors That Are On The Move!

Offering flexibility, improved functionality and when a pool is not in use, the ultimate in safety systems, moving floors are an increasingly specified option for swimming pools in the commercial and high-end domestic sectors. Whether it’s to vary the depth for pool users or to completely cover a pool area, there are a number of innovative options available to convert pools at the touch of a button and here, we feature some of the available solutions

By Jon Wadeson

When it comes to domestic swimming pool settings, even a fairly modest installation can take up a lot of valuable space, and that space will often be at a premium, especially in urban locations..

This is true for commercial installations too, which also potentially have an additional issue where the footprint of a pool can often occupy a space that is much larger than many of the other sporting facilities on offer. So maximising the use of space in either setting is clearly a huge beneﬁt offered by

pools that incorporate a moving ﬂoor, and it is usually the main reason for investing in one.

Totally transforming the area a pool occupies into something else, something which could provide a completely different use for the owner, well, that opens up numerous options and possibilities. Suddenly a games room or additional entertainment area is now possible for a home or maybe an additional sports hall becomes a realistic option for a leisure centre. This ﬂexibility opens up a whole host of usage options.

The advantages of a moving pool ﬂoor don’t

stop there though. When fully raised, safety is a huge and obvious benefit, but so too is lowering the running costs and maintenance needs of a pool. A moving floor can alter the water depth, making the pool a much more flexible space and able to accommodate a wider range of users.

With a number of obvious beneﬁts being offered, these impressively engineered options are now being viewed much more seriously in both the domestic and commercial sectors, and here, we take a look at just some of the moving ﬂoor solutions which are currently available for pools.

DISCOVER THE LATEST HYDROFLOORS PRE-ENGINEERED SOLUTION FROM TWINSCAPE

After over a decade of designing, manufacturing and installing HydrofloorsDreamLine® Movable pool floors, the Twinscape Group wanted to make their products available to a wider client base, so they have now introduced a ‘more affordable’ movable pool floor line: the HydrofloorsStreamLine®

The pre-engineered, standard-sized Hydroﬂoors-StreamLine® variable depth swimming pool ﬂoors provide the ideal fusion of form and function.

The introduction of this innovative product offers a unique solution for pool design, bringing unmatched flexibility and adaptability. Its ability to convert quickly between a pool and a flat floor that can be used for non-swimming activities makes it an attractive choice for residential, commercial and high-end resort projects –especially when space is at a premium. Twinscape believes that this product is the future of the swimming pool industry, and as a company that is focused on offering cutting-edge pool solutions, they are now establishing partnerships with pool builders across the UK.

Featuring the same dependable buoyant technology found in their custom, made to

The pre-engineered, standard-sized Hydrofloors-StreamLine® variable depth swimming pool floors provide the ideal fusion of form and function

MOVING FLOORS

measure Hydroﬂoors-DreamLine® product range, the Hydroﬂoors-StreamLine® is delivered in a standard-sized, cost-effective offering. Incorporating scissor lift technology with water-based hydraulics (that can be operated without water in the pool), an indoor or outdoor swimming pool can instantly serve as a child-friendly shallow depth pool, middepth pool for hydrotherapy/exercise, or have a full lap swimming depth.

When no longer required for swimming, the area will transform seamlessly from a sleek rectangle pool, to a terrace, exercise studio, dining room, or dance ﬂoor.

All designs and production take place in Suffolk, England, and Twinscape’s UK-based installation technicians will install all Hydrofloors® pool floor systems in close collaboration with each pool construction company. Cost-effective and brilliant in their simplicity, fit a transforming pool floor into almost any project budget with HydrofloorsStreamLine®

ASTRALPOOL ADDS A CUTTINGEDGE SOLUTION TO ITS PORTFOLIO

The future of swimming pool versatility has arrived, and it’s making waves across the UK! AstralPool, one of the most trusted names in the pool industry, is now an ofﬁcial UK supplier of Holland Aqua Sight’s cuttingedge moving ﬂoor systems – a development set to transform how pools are designed, built and used.

The unique solution is a floating concept combined with a stainless steel frame and a hydraulic system. It has been developed and tested by the specialists at Holland Aqua Sight and meets stringent safety standards. The floor can be adjusted to variable water levels, allowing children to play safely in shallow water, swim laps in mid-depth water, and dive into the full depth of the pool. Additionally, the floor can be set at terrace level, enabling owners to safely let children play without fear of them approaching the pool.

Hosting a party? Not a problem, owners can use the movable floor as a terrace, dance floor, or event venue as the movable pool floor can withstand very high loads. For each

project, the technical and structural requirements are thoroughly calculated to ensure a safe floor is guaranteed. Not only can the floor be made in various shapes and sizes, but it is also possible to design an integrated staircase as well as choosing a finish for the floor according to each client’s own style and taste.

Through AstralPool, UK companies can now access these systems with additional support available from Holland Aqua Sight for design, in-house installation and servicing.

EXPERIENCE THE ULTIMATE IN FLEXIBILITY WITH A TIELEMAN MOVING FLOOR

Supplied in the UK by Certikin, the Tieleman moving ﬂoor is suitable for both domestic and commercial use and is the ultimate in water leisure ﬂexibility.

The ﬂoor can be adjusted to different water levels, turning a swimming pool into a paddling pool for children, a dance ﬂoor or extra living space.

Offering multifunctional space, and the ultimate in safety, the ﬂoor is powered by water hydraulics, using a ﬂoating principle with

buoyancy providing the stability in the closed position with no access to the pool below.

The movable ﬂoor can be ﬁnished to match any scheme. The possibilities include stone, ceramic, mosaic, wood and stainless steel.

In a raised position, the movable ﬂoor ensures lower heating costs and use of chemicals and, as no dirt can enter the water, there’s reduced maintenance.

Suitable for skimmer and overﬂow pools and the shape made bespoke to your pool, the options are endless. It is possible to incorporate additional features such as a tilt mechanism that allows one end of the pool to be deeper than the other and it is even possible to have two movable ﬂoors move separately from each other in one pool.

Certikin offers a full service, from design through to installation.

T&A’S MOVABLE FLOOR INCREASES FLEXIBILITY, SAFETY AND SUSTAINABILITY

Looking to get the most out of your swimming pool, whether it’s morning, noon, or night?

T&A Group has an innovative solution: the AquaMove movable ﬂoor. This game-changing

Supplied in the UK byCertikin, the Tieleman moving floor is suitable for both domestic and commercial use and is the ultimate in water leisure flexibility

T&A’s AquaMove movable floor is a game-changing product that offers unparalleled flexibility, safety and sustainability

product offers unparalleled ﬂexibility, safety and sustainability, three values that T&A Group proudly upholds.

“The principle of a movable ﬂoor is simple,” said T&A Engineer Johan Moortgat. “Move the ﬂoor up or down to adjust the pool’s depth. Want to close off the pool entirely and create more space on your terrace or in your living room? No problem. The technical execution, though, is where the magic happens.”

The AquaMove movable ﬂoor uses buoyancy and a powerful tube motor.

Since the motor is under the ﬂoor, no extra technical room is needed. Anchors are only required in the ﬂoor, avoiding visual and practical hindrances. This makes AquaMove perfect for various pool types.

Everything is custom-made, and T&A Group handles installation and annual maintenance.

The company can also remotely read many parameters for preventive maintenance too.

The AquaMove can be adjusted continuously and comes in models with load capacities from 50 to 200kg/m². “The products are designed to be walked on, and you can even host a party on the AquaMove! With our optional Stability Hermetic Pack,

you ensure even more stability. Safety sensors stop the movement if they detect any objects or differences in load,” added Johan.

The AquaMove offers signiﬁcant ecological and economic beneﬁts. When closed, it reduces heat loss, contamination and water evaporation, resulting in lower consumption of water, energy and chemicals. “With decreasing prices and its role in reducing heat loss, it’s becoming a realistic option,” advised Joeri Dils, CEO of T&A Group.

A SWIMMING POOL OF THE FUTURE – THE NIVEKO MOTION POOL

With technological progress affecting every sphere of our lives, it is not surprising that even traditional swimming pools are seeing some revolutionary changes. NIVEKO has now launched a multifunctional pool that is ﬂexible enough to suit every member of the family yet is also an exceptional product with a timeless design – a pool with a movable bottom!

The NIVEKO Motion pool combines state-ofthe-art technology with NIVEKO’s quality pools and years of experience. For convenience, the product is supplied ‘All-In-One’ without the need for additional installation. This approach

underlines the company’s efforts to provide not only an outstanding product, but also a seamless and fast installation process.

The movable floor allows the depth of the pool to be easily adjusted to suit each user’s specific needs. The wide range of options for setting any depth from 0 to 150 cm allows the pool to be used as a safe paddling pool for children or as a full swimming pool for adults. This flexibility means the pool can also be used by people with limited physical mobility or for physiotherapy.

Raising the bottom to ground level prevents anyone from entering the pool when it is unattended or not in use, making it safe for every member of the family, including pets. In addition, the movable bottom effectively prevents overheating, heat loss and minimises evaporation. It prevents dirt from getting into the pool too, signiﬁcantly reducing the need for maintenance plus serves as an effective covering of the water surface during the winter months. What’s more, with a single click or turn of the key, owners can easily transform their pool into a full-ﬂedged terrace, making the most of garden space.

KBE – A LONG AND PROUD HISTORY IN MOVING FLOOR SYSTEMS

With a history in moving pool floors that stretches back almost 60 years, KBE Bauelemente are one of oldest established moving floor manufacturers and they have well over 1,000 satisfied customers worldwide. Their portfolio of solutions is available in the UK through Birmingham-based Suntrap Systems and their easy to operate systems are suitable for all types of new and existing pools, and feature an electro-mechanical drive system plus a lightweight construction.

All metal parts used in the pool tank are made of 316 stainless steel or a special bronze and the surface consists of reinforced polyester sections screwed together with 6mm wide slots, which allows waterﬂow through 1.5% of the surface area of the ﬂoor.

Alternatively, the moving ﬂoor surface may be formed by cassettes which accept tiling. KBE ﬁnd that private customers always prefer this option so that the tiling matches the

AstralPool, one of the most trusted names in the pool industry, is now an official UK supplier of Holland Aqua Sight’s cutting-edge moving floor systems

Supplied ‘All-In-One’ without the need for additional installation, the NIVEKO Motion pool combines state-of-the-art technology and a movable bottom!

MOVING FLOORS

poolside giving an improved aesthetic appeal, as well as increasing ﬂexibility in the use of the pool area for entertaining, family sports and more.

Integrated steps are often specified as these are self-depositing and have the same finish as the floor itself.

The ﬂoor is automatically locked using self locked screws in all positions. This is a high security system for extra safety.

Large cleaning flaps allow the use of an automatic pool cleaner under the floor overnight, as the area below the floor is free from cables, meaning it is not necessary to employ underwater divers.

No additional concrete support structure is needed and a minimum of site work to the pool tank is required for a KBE moving ﬂoor which meets the safety requirements of the European Standard EN 13451.11 in conjunction with Part 1.

MAXIMISE

THE SPACE WITH A BESPOKE OPTION FROM WRIGHTFIELD POOLS

Wrightfield Pools believe a swimming pool should blend seamlessly with the surrounding spaces. Their moving pool floors offer an ingenious solution for residential and commercial clients looking to maximise the versatility of their leisure areas.

Using advanced hydraulic scissor lift technology, their moving pool ﬂoors can be raised or lowered to any depth or closed completely to create a solid, usable ﬂoor space. This not only allows for full use of the area when the pool is not in operation, but also makes it possible to adjust the water

children’s play to serious training sessions.

One of the key beneﬁts for residential clients is the ability to create a safe, multi-use environment, particularly in homes with young children. When the pool is not in use, the ﬂoor can be elevated to ground level, instantly transforming the area into a secure space for play, entertaining or other leisure activities.

For commercial operators, including hotels, spas and private clubs, moving ﬂoors offer an exceptional way to optimise revenue by turning a single room into a multi-purpose venue for swimming, events, or exercise classes. Each ﬂoor is custom-engineered to

Totally transforming the area a pool occupies into something else, something which could provide a completely diﬀerent use for the owner, well, that opens up numerous options and possibilities”

requirements of the client, ensuring both safety and operational efﬁciency.

Compliance with safety standards and regulations is paramount when installing a moving pool ﬂoor in a commercial setting, so the company works closely with local authorities and regulatory bodies to ensure that the installation adheres to all relevant safety codes.

Strong, reliable and visually seamless, Wrightﬁeld Pools’ moving pool ﬂoors are a smart, future-ready investment for any property seeking to maximise its leisure space without compromise. SPN

KBE solutions feature an electromechanical drive system plus a lightweight construction

Wrightfield Pools believe a swimming pool should blend seamlessly with the surrounding spaces and their moving pool floors offer an ingenious solution

Quality, Strength And More –The Appeal Of Stainless Steel

The appeal of stainless steel for use in various wet leisure projects goes much further than it being a material chosen for challenging environments. Trendsetters love its clean and polished looks, and the same applies for many accessories too. Strength and durability combined with timeless aesthetics are a winning combination that ensures stainless steel solutions are always in demand and here, we examine options utilising it

The durability and longevity of stainless steel used in the production of a range of wet leisure installations not only makes for a responsible choice, but the timeless material also provides luxury, high-end looks too. Stainless steel is recyclable, so it is ecologically sustainable, as well as being eminently durable. It can also withstand challenging climate conditions meaning it’s equally at home in both outdoor and indoor environments.

Lightweight and watertight, designers of projects of a more challenging nature, such as in hard to reach or elevated positions, often turn to the material too.

In short, its numerous beneﬁts mean that the wet leisure industry has implemented stainless steel in many situations – from small spas, cold tubs, plunge pools and hot tubs, right up to the largest of swimming pools, plus of course, there’s also a wide range of ancillary products that are developed in stainless steel too. Ladders, steps, gratings, drains, lighting… all utilise this multitalented material due to its ﬂexible nature, durability and timeless good looks capturing the imagination of many

manufacturers. Those same beneﬁts and aesthetics have also captivated end users, making it a popular option across all sectors.

In this latest stainless steel-focused feature, we examine a selection of products that are utilising the versatile material for the beneﬁts it provides.

SHINY AND NEW FOR 2025 –DIAMANT POOLS FROM PLASTICA

Plastica is proud to be the exclusive UK distributor of Diamant, one of Europe’s leading manufacturers of high-end one-piece pools in stainless steel and polypropylene. Known for innovation and exceptional build quality, Diamant has completed over 20,000 projects since 1994 without resorting to mass production.

Diamant’s INOXline pools are made with AISI 316L ‘austenitic’ stainless steel – an alloy offering superior corrosion resistance, hygiene, durability and a sleek, modern appearance. The smooth, non-porous surface supports antibacterial protection, requires minimal maintenance and is 100% recyclable.

Unique features of the INOXline pools include:

By Jon Wadeson

• Weldless Wall Design: Up to 10 metres of continuous, weld-free walls ensure ﬂawless aesthetics and eliminate corrosion risks.

• Robotic Welding: Diamant is the only manufacturer using robotic welding technology, guaranteeing precision and uniform welds beyond manual capabilities.

• All-in-Factory (AL-FA) System: Pools are delivered fully ﬁnished in one piece, reducing on site mess, noise and installation time – and are often ready to ﬁll within hours.

The INOXline pools feature reinforced walls thanks to double horizontal folds enhance structural strength. Other integrated beneﬁts include:

• Factory-Installed Insulation: Walls include 2-5cm, and ﬂoors up to 10cm of insulation.

• Anti-Slip Surfaces: Customisable raised patterns on stairs and ﬂoors enhance safety.

• Stainless Steel Components: All parts are welded, not screwed or sealed, reducing leak risks.

• Advanced Drain Channel: Full-length bottom drain optimises circulation and water quality, eliminating the need for wall nozzles.

• Integrated Pool Cover Shaft: Concealed slatted cover enhances safety without obstructing swimmers.

Diamant pools blend modern luxury with long-lasting performance – ideal for discerning customers who value quality, style and efﬁciency.

FLOLUX FITTINGS – THEIR QUALITY IS REFLECTED IN THEIR FINISH

A huge amount of thought goes into designing luxury swimming pools and spas. But when selecting pool and spa ﬁttings, such as eyeball returns, pool builders tend to default to white PVC as standard.

For luxury builds though, PVC ﬁttings can compromise high-end design by detracting from a polished and luxurious look. Not only this, plastic ﬁttings are known to break down and discolour over time due to chemical and UV exposure.

Plastica is proud to be the exclusive UK distributor of Diamant, one of Europe’s leading manufacturers of high-end one-piece pools in stainless steel and polypropylene

STAINLESS STEEL SOLUTIONS

Flolux stainless steel fittings are superior in both style and substance. Purposefully designed to finish any build impeccably, their mirror-finish causes them to disappear into their surroundings, enhancing, instead of detracting from the design.

Made from 316L marine-grade stainless steel, they’re also longer-lasting than the PVC alternative. Compare the two hand-in-hand and the difference in quality is obvious –Flolux ﬁttings are solid and weighty.

Suitable for concrete and some fibreglass pools, Flolux fittings come in push-fit and threaded systems that are very easy to install during the build, or retrospectively.

The ideal upgrade for any luxury pool or spa, stainless steel ﬁttings are successfully offered as a contract variation by builders across the globe, helping to increase customer satisfaction and proﬁtability.

With distributors worldwide, their range of quality products are available in the UK through Certikin and Fairlocks Pool Products.

For high-quality pool design and construction that companies are proud to put their name to, for many projects, it makes sense to ﬁnish with a Flolux ﬁtting.

ONE-PIECE STAINLESS STEEL POOL OPTIONS FROM ASTRALPOOL

AstralPool UK Ltd have supplied a number of complete stainless steel pools ranging from

... its numerous beneﬁts mean that the wet leisure industry has implemented stainless steel in many situations”

Fluidra, AstralPool are well placed to build on the existing technical expertise by introducing further R&D of the pools, an example being where different flooring finish options are being developed to provide customers with a variety of styles to choose from.

This is based on direct customer feedback where the need for alternative ﬂooring options was highlighted.

A few years ago, AstralPool introduced new one-piece stainless steel pool options, which offer a degree of ﬂexibility and functionality to cater for this niche market where users desire a high-end product but with the convenience of a one-piece solution.

They offer a stunning luxurious ﬁnish with functional performance and can be provided with a range of optional extras such as turbine driven counter-current units, loungers and neck massagers.

The company are committed to developing this niche sector and have a dedicated Business Development Manager working alongside a technical and project team. With a remit to develop this area, AstraPool seeks to expand the awareness of the company’s offering to existing trade customers but also to create awareness amongst key architects, speciﬁers

it the perfect choice for reliable shell ﬁttings that deliver a strong aesthetic appeal.

Available from Golden Coast, the A800 Stainless Steel Skimmer by Weltico is a fantastic product, crafted from high quality AISI 316 surgical-grade stainless steel and suitable for all types of swimming pool. Whether using concrete, lining, or acrylic, the A800 will complement the design of any pool type, adding a clean, polished look to the ﬁnal build. This skimmer also facilitates a higher water level, reaching within 4cm of the surrounding deck level.

The A800 forms part of a comprehensive range of stainless steel ﬁttings offered by Weltico, which includes two additional skimmers to suit different pool requirements, adjustable jets and main drains.

The same stylish ﬁnish is also available to customers purchasing EVA Optic’s range of lighting and counter-current systems from Golden Coast. From durable, high-quality underwater lights to heat-resistant LED systems, EVA Optic offers a choice of lighting solutions to suit every space. And thanks to their stainless steel faceplates, each product can easily be adapted to suit a modern, minimalist aesthetic.

Of course, EVA Optic is also famous for the EVAstream – a counter-current system that delivers a constant ﬂow to challenge

Flolux fittings come in push-fit and threaded systems that are very easy to install during the build, or retrospectively

AstralPool offer one-piece stainless steel pool options, which provide a degree of flexibility and functionality to cater for this niche market

Available from Golden Coast, the A800 Stainless Steel Skimmer by Weltico is crafted from high quality AISI 316 surgical-grade stainless steel

THE SUPERIOR ALTERNATIVE TO PVC WALL FITTINGS

Highly durable, longer lasting and aesthetically superior.

It makes sense to finish with Flolux.

swimmers of all abilities. And the good news is, both the surface-mounted and recessed models are available with stainless steel housing or plates.

SPAFLO – CUSTOM-BUILT SOLUTIONS AND A DEDICATION TO EXCELLENCE

SpaFlo designs, fabricates, and installs fully bespoke stainless steel hot tubs, swim spas, swimming pools, cold plunge and hydrotherapy pools, plus more.

All products are designed and created to personalised speciﬁcations. Their production facility and design centre are based in Widnes, near Liverpool, and the company sources stainless steel from the UK and Europe for all their products.

SpaFlo supply their luxury swim spas and hot tubs to the public and design and fabricate unique pool and spa shells for site completion works on behalf of the UK’s leading pool installation companies.

In the dynamic ﬁeld of pool construction, the choice of material is crucial for longevity, aesthetic appeal and sustainability. Marine grade sustainable steel has emerged as a superior choice, surpassing traditional materials such as concrete and acrylic.

Among the industry leaders, SpaFlo is a premier designer of stainless steel pools and hot tubs, and the brand is trusted for its expertise and reliability in the UK pool building trade.

SpaFlo is dedicated to excellence, evident in the use of marine grade sustainable steel in all their designs. This commitment ensures that SpaFlo’s pools and hot tubs not only meet, but exceed industry standards, providing a level of quality and sustainability that large-scale contractors can rely on. The company’s track record of successful projects makes them a trusted partner across the UK.

FOR CERTIKIN, IT’S ALL IN THE FINISHING DETAILS

In addition to the innovatively designed range of Flolux ﬁttings which are an ideal

companion to their PU2 Mini LED Light, Certikin urges customers not to ‘throw the baby out with the bath water’, as many pools and spas can be made to look as good as new using their replacement ﬁttings.

For a quick and simple way to give a pool a refreshing make-over, look no further than Certikin’s stainless steel transformation kits for concrete pools. Designed to transform standard Certikin plastic fittings into luxurious polished stainless steel fittings, they are suitable for both new build and retrofit. Available in a square (ideal for a contemporary modern look) or classic round

design, the range includes skimmer, cover plates, inlets and vac points.

When it comes to making an entrance (or exit) Certikin also have a range of quality ladders for both domestic and commercial pools.

Their 1.7”/43mm ladders are supplied with stainless steel anti-slip treads as standard, as well as the new Certikin 1.7”/43mm pinch anchor. The pinch anchor design is based on the popular 1.5”/38mm model for a secure, sturdy installation on all types of pool surround.

All 1.7”/43mm ladders are now

CASE STUDY PRIVATE WILTSHIRE ESTATE RECEIVES A TIMELESS SOLUTION

One of the standout advantages of stainless steel is its lightweight nature, which allows for versatile installation options, even in challenging locations. A recent project at Seend Park, a privately owned Georgian estate in Wiltshire, showcased the adaptability of the material and was completed by Wrightfield Pools. With the historic property requiring a modern pool solution that could be installed with minimal disruption, their stainless steel system proved the perfect fit. The pool’s metal floor and side panels were carefully brought in via an existing window opening, allowing the build to progress efficiently

without compromising the building’s character.

Originally built in the 18th century and set within picturesque parkland, Seend Park required a pool that would complement its heritage while offering all the beneﬁts of a contemporary leisure space. Stainless steel provided the ideal balance of modern engineering and timeless elegance. Beyond aesthetics, stainless steel pools are renowned for their easy maintenance, hygienic surface and corrosion resistance. This makes them a practical long-term investment for both private residences and commercial leisure facilities.

Whether for new builds or sensitive refurbishments, pools produced in stainless steel deliver a beautiful, functional and future-proof addition to any property.

SpaFlo designs, fabricates, and installs fully bespoke stainless steel hot tubs, swim spas, swimming pools, cold plunge and hydrotherapy pools, plus more

Certikin stainless steel fittings are ideal for an up to the minute look in both new builds and retrofits

STAINLESS STEEL SOLUTIONS

manufactured in 316 grade stainless steel as standard and are suitable for concrete and liner pools.

WRIGHTFIELD OFFER STAINLESS STEEL SWIMMING POOLS FOR VARIOUS SETTINGS

Wrightﬁeld Pools specialises in designing, supplying and constructing high-quality stainless steel swimming pools and wellness solutions for various settings, including commercial, residential and leisure environments. With a strong focus on durability, aesthetics and functionality, the company offers bespoke pool designs that cater to each client’s unique needs.

Wrightﬁeld’s range of services includes the creation of standard swimming pools, hydrotherapy pools and bespoke wellness

facilities, all built using high-grade stainless steel. This material is known for its longevity, low maintenance requirements, and sleek and modern appearance, making it ideal for both luxury and practical installations.

The company’s expertise extends beyond just the pool shell; it can also provide complete solutions, including ﬁltration systems, heating and ventilation, ensuring that each pool is a fully integrated part of its environment. They work closely with architects, designers and clients to ensure that every aspect of the pool meets the highest quality and safety standards.

One key advantage of stainless steel pools is its flexibility in design and construction, meaning Wrightfield can create swimming pools in virtually any shape or size, including infinity, rooftop and underground options. This versatility makes them a preferred choice for both new construction and renovations.

In addition to swimming pools, hydrotherapy pools and spas, Wrightfield Pools offers innovative moving pool floors – a cutting-edge solution that maximises the versatility of any swimming pool space. With a commitment to innovation and customer satisfaction, Wrightfield Pools continues to be a leading name in the industry, delivering projects that combine functionality with elegance.

PARAGON STAINLESS PRODUCTS – SETTING HIGH STANDARDS IN STEEL

When Paragon Stainless Products’ Managing Director John Baker took full control of the company in 2015, he set about transforming it into a modern-day British, high-quality stainless steel fabrication company. His vision was to make the highest quality products with a young and

Since the takeover, the company has moved to larger premises, installed the latest equipment and technology, invested heavily in staff, plus introduced modern efficient manufacturing technologies. The company’s ethos is having well trained, highly skilled engineers manufacture amazing products – and that is exactly what happens at Paragon.

In keeping with the company’s vision to manufacture only the highest quality products, Paragon only manufactures in grade 316L stainless steel and everything is made in their factory in Colchester, Essex. All material comes from Western European foundries with test certificates made available to clients. Paragon’s clients value them, because they value their clients as unique and always aim to resonate with what they are seeking to do. While Paragon’s standard range of products offers high quality and depth, the company are at their best when the need is bespoke.

Going on site, seeing the challenges ﬁrst hand, understanding the complexities and potential problems, and providing a solution is what propels the Paragon team to go beyond being just good and becoming exceptional. The company doesn’t see taking those extra steps as a cost, but the making of it and believes that this is the foundation to building a long term, successful partnership with clients. SPN

Wrightfield can create swimming pools in virtually any shape or size, including infinity, rooftop and underground options

STAINLESS STEEL SWIMMING POOL

Experience unparalleled quality and sophistication with an AstralPool stainless-steel swimming pool. Engineered for durability and elegance, our pools offer:

Superior Durability: Crafted from high-grade stainless steel for long-lasting performance.

Modern Aesthetics: Sleek and stylish design to complement any indoor or outdoor space.

Low Maintenance: Resistant to corrosion and easy to clean.

Customisable Options: Tailored to fit your unique requirements and preferences.

BUYERS GUIDE

ONE-PIECE POOLS

BUYERS GUIDE

Ensuring Grassroots Sports Funding Reaches Our Pools

Leaders from across local government and the fitness and leisure sector are urging the Government to ensure that the £400m announced in the Spending Review for grassroots sports facilities is directed towards vital community assets such as leisure centres, swimming pools and local gyms

Acoalition – made up of Swim England, the Local Government Association, Chief Cultural and Leisure Ofﬁcers Association, Community Leisure UK, Society of Local Authority Chief Executives and Senior Managers and ukactive – is calling for the £400m of funding announced in this year’s Spending Review to be invested in the facilities that people rely on every day to stay active and healthy.

They argue that local authorities are best placed to identify where investment is most needed, and to ensure the funding delivers maximum impact for communities.

With councils already the largest funders of public ﬁtness and leisure services, directing investment through them would help safeguard and enhance the infrastructure that supports physical activity across the country.

This approach would also align with the Government’s 10 year health plan, enabling councils to work with health and care partners to promote active lifestyles and improve public health outcomes.

With leisure centres and swimming pools particularly popular amongst older age groups and people with health conditions, supporting these facilities will help tackle existing health inequalities most effectively.

The call comes amid stark warnings about the state of the nation’s leisure infrastructure:

• 30% of children in Year 7 cannot swim 25 metres conﬁdently – up from 27% in 2017/18.

• Since 2010, 500 swimming pools have closed, representing a loss of over 34,000 square metres of water space. Nearly half of these closures occurred in the last ﬁve years.

• 63% of main sports halls and 60% of swimming pools are beyond their expected lifespans or in need of refurbishment.

• 24% of council areas face the risk of reducing or closing leisure services due to rising energy and operational costs.

• If current trends continue, physical inactivity could rise by 35% by 2030, placing further strain on the NHS and public ﬁnances.

• Public demand for health and ﬁtness facilities is growing, with a record 11.5 million people now a member of a health and ﬁtness club in the UK, but growth is hampered by economic conditions.

Andy Salmon, CEO of Swim England, said: “Swimming is particularly popular amongst older age groups, and those with a disability or long term health condition.

“If we want to tackle health inequalities and best support a healthier and happier nation then it’s vital we have a network of sustainable pools for people to access.

“That’s why we need to see this investment targeted at the pools and leisure centres the nation needs.”

Cllr Liz Green, Chair of the Local Government Association’s Culture, Tourism and Sport Board, said: “Local communities rely on sport and leisure facilities every day, whether it is swimming for the family or going to the gym. The beneﬁts to both physical and mental health can be life-changing. Yet without urgent investment we risk losing these altogether.

“It is positive the Government has announced £400m for grass roots sports facilities. But for this funding to be truly transformative, we are calling for this to be invested via councils, so it can have the impact that delivers the ambition the Government has to improve our nation’s health.”

Huw Edwards, CEO of ukactive, said:“It is vital that the Government does not repeat the same mistakes of the past by continuing to focus investment in facilities that have not delivered a happier, healthier nation, and instead invests in facilities that match the needs and demands of communities.

“Investing strategically in gyms, pools and leisure centres will demonstrate the Government’s commitment to the major drivers of physical activity and help address the market failure of public sector facilities so they can fulﬁl their essential role.”

Donna Pentelow, Chair of CLOA, said: “Council leisure centres, swimming pools and outdoor spaces are on the frontline of local health and wellbeing. We see every day how vital these facilities and spaces are to support active wellbeing for residents of all ages.

“A place-based investment approach ensures funding reaches the communities that need it most. By directing grassroots sports funding through local government, we can support its appropriate use to truly tackle health inequalities and deliver on the Government’s long-term health ambitions.”

Kirsty Cumming, CEO of Community Leisure UK, said: “Public leisure is at the heart of communities across the country, offering opportunities for communities to be physically, mentally and socially active.

“We urge the Government to invest in public leisure facilities, from single site community run pools to large leisure venues, supporting them to be sustainable and enabling people to live healthier and happier lives.”

...for this funding to be truly transformative, we are calling for this to be invested via councils, so it can have the impact that delivers the ambition the Government has...