Call 1-888-840-1555- How to fix Canon printer error 5b00

How to fix Canon printer error 5b00?

The error code 5b00 is a very common issue that occurs regularly on Canon printers. You’ll find that the printer boots usually when you turn it on and try to print a document. Printing or scanning a document, on the other hand, is no longer possible.

This Post about How to fix can printer error 5b00 will assist you. https://allprinters-customercare.com/how-to-fix-canon-printer-error-5b00/

Cause of the Canon error 5b00  Due to incorrect ink cartridge usage.  The waste ink counter  You can also clean the waste ink pad manually by following the instructions in our guide.

Fix Canon Printer Error 5b00 in Easy Steps In the section below, we’ve listed some of the best possible solutions to the problem. Just make sure to follow them exactly to avoid any complications.

Restart the ink waste counter.  First, disconnect the printer’s power and USB cables.  Press the Power button when opening the cartridge lid.  While plugging the power cord into the wall socket, continue to hold the Power button.

 Press and hold the Power button until the printer begins to reset itself.  Release it once all of the lights are turned on.  Wait until the green power light goes out.  After that, quickly press and release the Power button twice.  The green light should continue to blink for a few seconds more before stabilizing.  Close the cartridge door and try printing again if necessary.

Ink spills on your printer are a common cause of the 5b00 error in Windows 10. Reset the ink absorber if the ink absorber is full or the waste ink counter is full.

This quick-fix can be used to clear out several error codes that may appear when turning on the printer. Also, if you are unable to delete the printer in Windows 10, you can use our detailed guide to quickly resolve the issue.

Clean the waste ink pad by hand.  Take out the ink cartridges and open the compartment.

This compartment may be located in the front or back of the Canon printer, depending on the model.  Wait for the ink cartridges to fully retract.  After that, unplug the printer’s power cord.  There is a row of white rollers behind the cartridge.

Look for a small square that looks like a foam pad near the roller.  Remove the waste ink absorber by lightly pulling on its rubber frame.  Wipe it down with a paper towel. Collect all ink waste on paper towel pieces as much as possible.  Replace all of the cartridges in their proper locations.  Insert the frame back into the printer.  Now you can reconnect the power cord by pressing and holding the Power button.  Release the button when the printer is on.  After five seconds, press the Power button once more. The printer’s internal memory is reset, and the 5b00 error code is overridden.

Alternative solutions This error can often be caused by a dirty print head. Make sure your print head is in good working order and that it is also clean.  Check the system’s ink level as well. You have no choice but to fill it to the maximum capacity if the ink level is low.  Reset your printer to factory settings to continue the troubleshooting process.

There are a few options for resolving Canon printer error 5b00.

Use the steps above and let us know if they worked for you as well or dial our canon printer support number 1-888-840-1555 for instant support

Thanks For Sharing

https://allprinters-customercare.com/how-to-fix-canon-printer-error-5b00/