Page 1

HEADLIGHT CLEAR COAT

CLEAR COAT 294 HS Headlight Restoration

ADVANTAGES • Not yellowing (newest Extra strong UV protection) • High adhesion on headlight • More Antistatic Control (Dust repellent) • Less sensitive to the silicone or oil problem • Extra Easy Levelling • Easy to polish • Increased Vertical Stability

CURING • Faster curing (20’ @ 60°C)

PROVIDES PROTECTION AGAINST YELLOWING


SCHEDA TECNICA - TECHNICAL INFORMATION - TECHNISCHE INFORMATIONEN - INFORMATIONS TECHNIQUES

294 HEADLIGHT RESTORATION 2:1 CLEAR COAT HEADLIGHT CLEAR COAT

Compatible with all polycarbonate headlight. Suitable both restoration of headlight clear coat after sanding with abrasive paper. Before the application of 294 HEADLIGHT CLEAR COAT, remove scratches, mat and yellowed areas with sanding paper discs. As with all paint systems, best results are obtained if the clear coat is sprayed at a temperature of 20-25°C. It is also recommended to bring the surface to at least 15°C before proceeding to the application of the product. Low temperatures make application, absorption and levelling very difficult. It is very important to carefully follow the application procedure to avoid too thick layers and consequent delays in drying process. Is particularly important to ensure that sanded headlight is completely dry, that is does not contain traces of moisture, water or solvent before applying the clear coat.

294.0500.12 295.0250.12

VOC

Codice prodotto Code - Codigo

294.1000.12 Prodotto / Clear coat 295.0250.12 Catalizzatore/Hardener

NUMERO MANI Number of coats Passes

NATURA PRODOTTO Nature of product Nature du produit Naturaleza de producto Contenuto solido Solid content

Resina Specifica Modified specific resin

SPESSORE FILM SECCO 55 microns Dry film thickness APPASSIMENTO Flash time Evaporation

6‘-8‘ minutes Tra una mano e l'altra Between the first and second coat

FUORI POLVERE (20°C) Dust free (20°C)

15‘-20‘

V.O.C. PRODOTTO CH Product V.O.C. CH

SECCO AL TATTO(20°C) Tack free (20°C)

2-4 h

Colore Trasparente Colour • Coleur • Color Transparent • Transparent • Transparente

PRONTO AL MONTAGGIO 24 h @ 20°C Dry to assemble

V.O.C. PRODOTTO Pronto all'uso Product V.O.C. Ready to use

Peso Specifico Specific Gravity Poid specific Peso specifigo RAPPORTO MISCELA Mixing ratio A B C Proportion de melange

g/L

PRODOTTO Product Produit Producto CATALIZZATORE Hardener Durcisseur Endurecedor DILUENTE Thinner Diluant Disolvente

A B C

POT-LIFE Pot-life (20°C)

VOC (2004/42/CE IIB) ------------------------------------(e-840 g/L max) cont. 582 g/L

TEMPO ESSICAZIONE Through drying • Evaporation (68°F)(20°C) Aria 24h Air (140°F)(60°C) Forno 20' Spray Booth 12 mesi in luogo fresco e asciutto CONSERVABILITA' 12 months in a cool and dry place Ageing 12 mons dans un endroit frais et sec Stockage

960 ± 50 g / l

Ratio = 2:1 Asta graduata Measuring sticks

292 Clear Trasparente 293 Hardener Catalizzatore 898 AD Thinner Diluente

VOLUME% PESO (g) Volume Weight 100

100

50

50

0

Roto orbitale bagnato Flat bed sander wet Ponceuse vibrante à l'eau Roto orbitale secco Flat bed sander dry Ponceuse vibrante à sec Cart. manuale bagnato Sanding by hand wet Ponçage à la main eau

0

ADDITIVI Additives

3-4 h

Pezzi Cartone Pieces/carton box No. par carton Envases por caja Cartoni Pallet Carton box / Pallet Eur 80 x 120 cm

VISCOSITA' APPLICAZIONE 17±2" Coppa Ford Ø 4 a 20°C Spraying viscosity Viscosité d'application PISTOLA A CADUTA

1,2 - 1,4 mm.

PISTOLA AD ASPIRAZIONE

-

PRESSIONE ARIA (Bar)

3 - 3,5

Gravity feed spray gun Pistolet à gravité Suction feed spray gun Pistolet à godet suspendu ATM

2 mani piene 2 full coat

Air pressure (Bar) Pression

!

500ml clear 250ml Hardener 500 ml

12 pezzi/pieces/boîtes 12 Cat. / hard./durcis.

60 cartoni / carton boxes

We do not recommend drying tunnel with infrared. Respect the drying times between each hand. Polishing after 6 hours of air drying at 20°C or after 30’ with oven drying after 20’ at 60°C.

Data, information and suggestions correspond to our experience in the field. However, we assume no responsibility for results obtained, as conditions and usage are beyond our control.

Data Sheet Pag. 142 PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICA ALLCHEM S.r.l. Via Azzano S. Paolo, 32/C - 24050 GRASSOBBIO (BG) ITALY - Tel. +39-035 525 616 - Fax +39-035 526 199 - www.allchem.it - info@

I dati contenuti nella presente scheda si basano sulle nostre conoscenze ed esperienze. Questi non sono impegnativi poiché a causa della diversità dei materiali presenti sul mercato ed al fatto che le condizioni di applicazione sfuggono al nostro controllo, si deve verificare con prove adeguate la idoneità del prodotto per lo specifico uso preso in considerazione. Per ulteriori informazioni contattare il nostro servizio tecnico.

Profile for ALLCHEM ITALY

294 gb Headlight clear coat  

Headlight Restoration 2K Clear Coat with strong adhesion

294 gb Headlight clear coat  

Headlight Restoration 2K Clear Coat with strong adhesion

Advertisement