292 GB TDS 2:1 Air Drying Clear Coat

NO OVEN 2:1 AIR DRYING CLEAR COAT HSA ADVANTAGES • Very Fast • More Antistatic Control (Dust repellent) • Easy Levelling • Not yellowing (newest UV protection) • Does not magnify metallic (will not distort the metallic) • Easy to polish

USE • Ideal for working up to 3, 4 panels • With the addition of CAR FULL ADDITIVE is possible to paint the entire car

CURING • 60’ @ 20°C • 10’ @ 60°C • 10’ with infrared

2:1

HIGH PRODUCTIVITY LOW COST

SCHEDA TECNICA - TECHNICAL INFORMATION - TECHNISCHE INFORMATIONEN - INFORMATIONS TECHNIQUES

292 AIR DRYING 2:1 CLEAR COAT Compatible with all standard finishes currently available, suitably degreased and dulled.

All 2K bases, metallic, mica, pearl and pastel formulated for the automotive industry. Suitable for painting of 3-4 panels for small jobs (spot repairs).

Not recommended for very large surfaces.

Before applying AIR DRYING Clear Coat, dulling the old finish that must be covered, and degreased with a water antisilicone (DEGREASER). As with all paint systems, the best results are obtained if the lens is brought to the temperature of the spray before the application (20-25 ° C). It is also recommended to bring the surface to at least 15 °C before application. The low temperatures make more difficult for the absorption of the fumes and distension.

It is important to carefully follow the application procedure to avoid too thick resulting in delays in the drying phase.

It is especially important to make sure that the base coat is completely dry or does not contain traces of moisture, water or solvent before applying clear.

292.1000.12 293.0250.12 898.0250.12

Codice prodotto Code - Codigo NATURA PRODOTTO Nature of product Nature du produit Naturaleza de producto Contenuto solido Solid content

VOC

SPESSORE FILM SECCO 55 microns Dry film thickness

Resina Specifica Modified specific resin

FUORI POLVERE (20°C) Dust free (20°C)

15‘-20‘

V.O.C. PRODOTTO CH Product V.O.C. CH

SECCO AL TATTO(20°C) Tack free (20°C)

2-4 h

Colore Trasparente Colour • Coleur • Color Transparent • Transparent • Transparente

PRONTO AL MONTAGGIO 2-4 h Dry to assemble

V.O.C. PRODOTTO Pronto all'uso Product V.O.C. Ready to use

PRODOTTO Product Produit Producto CATALIZZATORE Hardener Durcisseur Endurecedor DILUENTE Thinner Diluant Disolvente

C

POT-LIFE Pot-life (20°C)

VOC (2004/42/CE IIB) ------------------------------------(e-840 g/L max) cont. 578 g/L

Ratio = 2:1 Asta graduata

292 Clear Trasparente 293 Hardener Catalizzatore 898 AD Thinner Diluente

VOLUME% PESO (g) Volume Weight 100

100

50

25

0

2-2,5 h

PISTOLA A CADUTA

1,2 - 1,4 mm.

PISTOLA AD ASPIRAZIONE

-

PRESSIONE ARIA (Bar)

3 - 3,5

Gravity feed spray gun Pistolet à gravité Suction feed spray gun Pistolet à godet suspendu Air pressure (Bar) Pression

TEMPO ESSICAZIONE Through drying • Evaporation 60' Air (68°F)(20°C) Aria 10' Spray Booth (140°F)(60°C) Forno 12 mesi in luogo fresco e asciutto CONSERVABILITA' Ageing 12 months in a cool and dry place Stockage 12 mons dans un endroit frais et sec

992 ± 50 g / l

VISCOSITA' APPLICAZIONE 18±2" Coppa Ford Ø 4 a 20°C Spraying viscosity Viscosité d'application

ATM

2 mani piene 2 full coat

3‘-6‘ minutes Tra una mano e l'altra Between the first and second coat

Peso Specifico Specific Gravity Poid specific Peso specifigo RAPPORTO MISCELA Mixing ratio A B C Proportion de melange

B

NUMERO MANI Number of coats Passes

APPASSIMENTO Flash time Evaporation

g/L

A

292.1000.12 Prodotto 293.0500.12 Catalizzatore/Hardener

0

Roto orbitale bagnato Flat bed sander wet Ponceuse vibrante à l'eau Roto orbitale secco Flat bed sander dry Ponceuse vibrante à sec Cart. manuale bagnato Sanding by hand wet Ponçage à la main eau ADDITIVI Additives Pezzi Cartone Pieces/carton box No. par carton Envases por caja Cartoni Pallet Carton box / Pallet Eur 80 x 120 cm

1 L clear 500ml Hardener

12 pezzi/pieces/boîtes 12 Cat. / hard./durcis.

1 L 60 cartoni / carton boxes

We do not recommend drying tunnel with infrared. Respect the drying times between each hand. Polishing after 2 hours of air drying at 20°C or after 30’ with oven drying after 10’ at 60°C. Data, information and suggestions correspond to our experience in the field. However, we assume no responsibility for results obtained, as conditions and usage are beyond our control.

Data Sheet Pag. 141 PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICA ALLCHEM S.r.l. Via Azzano S. Paolo, 32/C - 24050 GRASSOBBIO (BG) ITALY - Tel. +39-035 525 616 - Fax +39-035 526 199 - www.allchem.it - info@

I dati contenuti nella presente scheda si basano sulle nostre conoscenze ed esperienze. Questi non sono impegnativi poiché a causa della diversità dei materiali presenti sul mercato ed al fatto che le condizioni di applicazione sfuggono al nostro controllo, si deve verificare con prove adeguate la idoneità del prodotto per lo specifico uso preso in considerazione. Per ulteriori informazioni contattare il nostro servizio tecnico.