AIS AUG_SEP 2016 CRACKIN' DEALS Catalogue (Metro)

August - September 2016 95pce Metric/AF Tool Kit • 1/4", 3/8" & 1/2"Dr socket set with ratchet handles & accessories • 20pce spanner set • 11pce ratcheting bit set • Hacksaw • Ball pein hammer.

SCMT10148

299

$

BONUS 6pce Geared Stubby Spanner Set

SCMT22294

115

$ 450g Trigger Action Grease Gun & Carry Case

• Grease pressures of up to 8,500psi (586bar) • High volume or high pressure option • Ever-Flow System enables the use of thick tacky greases even in the coldest conditions • Convenient & handy storage for an extra grease cartridge. 660ANP

WITH CASE

INCLUDES Auto Darkening Helmet, Gloves, Wire Spools & Trolley

199

$

799

$

180A Mig Welding Pack • 240V • Portable • Ideal for light fabrication, maintenance & repair.

Euro connect torch • Solid metal drive assembly • Gas or gasless • Spool gun ready • Thermal overload • 6 voltage settings • Fan cooled.

600186BUNDLE

59pce 1/4, 3/8 & 1/2"Dr Metric/AF Socket Set

BONUS 300mm Adjustable Wrench SP18072

• Metric & AF sockets ranging from 4-32mm and 1/4" to 1-1/4" • Includes ratchet handles and other assted accessories. SP20280LE

AUSTRALIA’S INDUSTRIAL SUPPLIES SPECIALISTS The industrial specialists see back page to find your local store

www.aisnational.com.au On sale 1/8/2016 1/8/2015 until 30/9/2016 30/9/2015

Carry Case

Bag

2 Batteries

2 Batteries

999

$

599

4pce 18V Combo Kit

Charger

$

Charger

• Brushless hammer drill/driver • Impact driver • 125mm angle grinder • Rotary hammer drill • Includes 2 x 5.2Ah batteries, charger and bag. AU68501730A

115

$

549

$

429

$

18V Blower (Tool Only) • Ergonomic design with thumb wheel for preselection of air speed delivery. 602242850

229

$

628831000

2 Batteries

2 Batteries

Charger

Charger

• Hammer drill/driver (135Nm) • Impact driver (203Nm) • Includes 2 x 5.0Ah batteries, charger and case • Also included is an M12 1.5Ah battery. M18FPP2A-502C

Bag

$

BONUS M12 Multi-Tool

669

(Tool Only) Via Redemption C12MT-0

• Hammer drill/driver • Impact driver • Includes 2 x 4.0Ah batteries, charger & case. M18BLPP2B-502C

M18 FUEL 125mm Angle Grinder (Tool Only)

4pce M18 FUEL Brushless Power Pack • Hammer drill/driver (135Nm) • Impact driver (203Nm) • 125mm angle grinder • 1/2"Dr high torque impact wrench • Includes 2 x 5.0Ah batteries, charger and bag.

M18FPP4J-502B

2 Batteries

BONUS 10pce Impact Socket Set

Carry Case

2pce M18 Brushless Power Pack

KIT INCLUDES

18V 1/2"Dr High torque Impact Wrench (Tool Only) • 600Nm • Low kickback • Integrated work light • Belt hook. 602198890

Carry Case

2pce M18 FUEL Brushless Power Pack

POWER TOOLS

POWER TOOLS

• Brushless hammer drill • Impact driver • Includes 2 x 5.2Ah batteries, charger and case.

AU68901310A

KIT INCLUDES

KIT INCLUDES

KIT INCLUDES

2pce 18V Combo Kit

KIT INCLUDES

• Brushless motor • Dead man paddle switch • Tool free burst resistant guard • Full metal gear box • Anti-vibration side handle.

M18CAG125XPD-0

1,199

$

Charger

18V Multi Tool (Tool Only)

279

• Variable speed • Quick release tool change system • Integrated extra bright double LED work lights • Includes accessory kit (sanding pad, sanding sheets and cutting blades). 613021890

$

249

$

KIT INCLUDES

18V Brushless Hammer Drill Driver Kit

Carry Case

• 136Nm • Includes $ 2 x 6.0Ah batteries, rapid charger and case • 3yr warranty.

DV18DBL2(HX)

599

2 Batteries

Charger

KIT INCLUDES

719

$

Carry Case

2pce 18V Brushless Kit

2 Batteries

• Hammer drill/driver (136Nm) • Impact driver (172Nm) • Includes 2 x 6.0Ah batteries, rapid charger and case • 3 Year Warranty. KC18DDL(HA)

Charger

NEW

BONUS 7pce Impact Socket Set

289

18V 125mm Brushless Angle Grinder (Tool Only) 2

• Paddle switch • Soft-start • Anti-kickback & overload protection • 3yr warranty. G18DBAL(H5)

$

629

18V Nibbler (Tool Only) • Mild steel 1.6mm • Stainless steel 1.2mm • Rotatable head • 3yr warranty. CN18DSL(H4)

The right price & practical advice

289

$

797227

M18 FUEL 1/2"Dr Impact Wrench (Tool Only)

M18 Digital DAB+ Jobsite Radio (Tool Only)

399

$

18V 1/2"Dr High Torque Impact Wrench (Tool Only)

• Dual speakers with passive radiators •Shock absorbing end caps • Integrated handles • USB power outlet. M18JSRDAB+-0

• Powerful 480Nm of tightening torque • Forward & reverse tumbler switch provides an easy one handed switch over in fastening direction • 3yr warranty. WR18DSHL(H4)

Inspection Camera

NEW 149

$ $

NEW

499

$

18V Shear (Tool Only) • Mild steel 1.6mm • Stainless Steel 1.2mm • Easily replaceable blades have 8 cutting edges each for extended service life • 3yr warranty. CE18DSL(H4) nd us on Fi

fa

cebook

• Friction ring • 4 mode drive control with auto shut-off. M18FIWF12-0

$

NEW

• Optimised 68mm (2.7") LCD display • 9mm 640 X 480 digital inspection scope • Four surround LED lights • Includes 9V battery. 2309-40

NEW

INDUSTRY TOUGH TOOLS FOR ALL

629

16GA Straight Finishing Nailer (Tool Only)

• Brushless motor • Zero ramp-up time • No gas cartridges • For 19mm to 52mm ND series nails.

M18CN16GS-0C

NEW 349

$

379

$

M18 FUEL 180mm Polisher (Tool Only) • Cordless detailing • 8 speed settings • Able to polish a full-size car on 1 charge (5.0Ah Battery) • RPM: 360-2200 • Disc diameter: 180mm.

M18FAP180-0

M18 HP Area Light (Tool Only) • 3000 lumens • Three light output modes for optimal brightness and runtime • High definition output with true colour, even beam, and natural light • Dual power source: M18™ or corded • Light head rotates 240° with positive stops. M18HAL-0

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

3

DCR006-XE Via redemption

Includes stand

KIT INCLUDES KIT INCLUDES

KIT INCLUDES Carry Case

999

$

5pce 18V Brushless Kit • Hammer drill/driver • Impact driver • Recip saw • 125mm angle grinder • Torch • Includes 2 x 5.0Ah batteries, charger and case.

DCZ594P2-XE

229

$

1,149

$

Carry Case

Carry Case

4pce 18V Combo Kit

2 Batteries

2 Batteries

• Brushless hammer drill/driver • Brushless impact driver • Brushless impact wrench • 125mm angle grinder • Includes 2 x 5.0Ah batteries, charger and case. DCK399P2-XE

Charger

1,399

$

319

$

Charger

2pce 18V Brushless Nailer Kit

399

$

DCB182_XE

BONUS Torch

• Variable speed trigger, lock-off switch and electronic motor brake. DCS380N-XE

18V Brushless DCL040-XE Collated Drywall Screwdriver (Tool Only)

18V Brushless Planer (Tool Only) • Includes: Tungsten carbide tipped reversible blades & accessories. DCP580N-XE

Charger

• Brushless 2-Speed framing nailer • Brushless 16Ga second fix nailer • Includes 2 x 5.0Ah batteries, charger and case. DCZ266P2-XE

BONUS 4.0Ah Battery

18V Reciprocating Saw (Tool Only)

2 Batteries

$

• 590W • 3750rpm no load speed • Blade bore: 16mm • Bevel capacity: 48° • Mitre capacity: 48° left and right. DCS365N-XE

• Max torque 5-30Nm • Light and compact. DCF620KN-XE

• Vario (V)Electronics for working at customised speeds to suit various $ application materials • Thumbwheel for speed preselection • Forward & reverse rotation • Multi position side handle • Depth guage. 600671530

AU69001600

129

279

$

800W SDS Plus Rotary Hammer Drill

• Hammer stop for drilling in rotary only mode • Rotation stop for chiselling • Vario (V)-electronics for working at customised speeds • Electronic soft start. 606157190

629

18V 184mm Cordless Sliding Mitre Saw (Tool Only)

1,089

$

BONUS 13pce SDS Bit Set

650W 13mm Hammer Drill

BONUS 25 x Assorted Sanding Discs

260mm Slide Compound Mitre Saw • 1510W • Light weight • Trolley castors • Includes stand. MAK-COMBO-013

75

$

269

$

624066000

359

$

650W PowerShear

2000W Heat Gun

150mm TurboTec Orbital Disc Sander • 350W • 240V • Variable speed • Dual orbit Ø3/6mm • Turbo boost • Alloy base • Intec dust system. 600129190

POWER TOOLS

POWER TOOLS

BONUS Bluetooth Speaker

• Ideal for corrugated sheet, etc • Cutting capacity: sheet steel 1.6mm, stainless steel 1.2mm • 2.800RPM • Auto stop carbon brushes. 600260190

• Includes nozzle attachments and storage case • 1 year warranty.

RH600T

119

$

KIT INCLUDES

Bag

2,249

$

8pce 18V Brushless Combo Kit

BONUS Bluetooth Speaker

• Hammer drill/driver • Impact driver • Rotary hammer drill • Angle grinder • 165mm circular saw • Reciprocating saw • Bluetooth jobsite radio • Torch • Includes 2 x 6.0Ah batteries, charger and bag. DLX8006PG

89

• Max fastening torque 280Nm. DTW281Z

100mm (4") 800W Angle Grinder

• 11,500 RPM • Compact and slim design • 2 position handle • Burst resistant guard. AG800-100 Also Available: AG800-125 800W, 125mm $109

329

$ Charger

299

$

99

219

$

$

2 Batteries

Via Redemption DMR200

$

18V Brushless Impact Wrench (Tool Only)

125mm (5") Angle Grinder Kit

125mm (5") 1250W Angle Grinder

• 730W • Slide switch • Includes accessories and carry case. G13SR4-BP

• Anti-vibration side handle • Safety clutch to prevent kickback • 4m rubber cable. AGV13-125XE

BONUS 3 x 125mm Convex Flap Discs

339

62646000

355mm (14") Metal Cut Off Saw

$

185

229

$

$

• 2200W • 3800rpm • Tool-less wheel change & guide plate adjustment. LW1400

389

$ 18V Blower (Tool Only) 4

• 3 speed settings • Variable speed trigger. DUB182Z

18V Brushless Impact Driver (Tool Only) • Impact rate: 0-3200rpm • Max fastening torque 160Nm • LED job light with pre-glow function. DTD129Z

379

$ 125mm (5") Flat Head Angle Grinder

18V 125mm (5") Brushless Angle Grinder (Tool Only) 18V Dual Port Charger • Slide switch • Automatic torque drive. • Charges 2 batteries simultaneously • Forced air DGA504Z cooling fan • 5.0Ah battery included. 197564-4

AIS gift vouchers - perfect for the trade professional

nd us on Fi

fa

cebook

• 1550W • Flat head design allows access in tight work areas • Tool-free disc change via quick-locking nut • Anti vibration handle. 613082000

INDUSTRY TOUGH TOOLS FOR ALL

230mm (9") 2200W Angle Grinder • Double action paddle lock-off dead man switch with rat tail grip • Starting current limiter & soft start • Anti-vibration. AGV22-230 Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

5

$

2

70

EACH

BONUS Multi-Tool

L100V2EN

25 PACK

125mm x 1.0mm INOX Ultra Thin Cutting Wheel • Fast cutting action, reducing heat and burr build up • Suitable for cutting of metal, sheet profiles & solid material • INOX wheel for use on stainless steel & mild steel applications. 61341112

2

$

00 EACH

44

125mm x 1.0mm Mild Steel Ultra Thin Cutting Wheel

$

25 PACK

795

$

99 19pce Drill Set

• 2.8mm thickness • Suitable for solid material, sections & pipe • Suits everyday applications. 66323574

• For fast, easy cutting with minimized burr formation of mild steel. 61719010

• 1.0 -10.0 x 0.5mm • Includes bonus Gerber Evo multi-tool. D101BSM2

16

$ 125mm Beartex EACH Rapid Blend Flap Discs – Medium (Maroon)

100mm $ Beartex Blaze Rapid Strip Disc SG Ceramic (Orange)

20

• Used for deburring, blending, cleaning, polishing and finishing • Ideal for light metal removal • Gives a less aggressive cutting action and will retain a constant finish throughout the life of the disc. 66623321830 Also Available 125mm: Part No Description Price 66623321831 Very fine (blue) $14 66623321829 Coarse (Brown) $16

• Extremely tough and long lasting • Stripping and blending • Heavy scale removal • Surface preparation • Resists loading and is smear resistant • Extremely versatile. 63642509505 Also Available: Part No Size Price 66623303783 115mm $22 66623303916 125mm $25

ed Limit ! k Stoc

4995

CUTTING & DRILLING

$

2150

$

PACK 10

BONUS 18 & 32 TPI Blades

Professional Hacksaw Frame • Very high blade tension for straight, accurate and exact cuts • Includes Bi-metal blade with 24 TPI. 319

FROM

300mm Bi-Metal Hacksaw Blades Part No H3410018 H3410024 H3410032 H3560018 H3560024 H3560032

Description 18tpi 24tpi 32tpi 18tpi Cobalt 24tpi Cobalt 32tpi Cobalt

25pce Metric Viper Plus Drill Set • TiAlN Coated • Split point for easier penetration • 1.0mm 13.0mm x 0.5mm rises.

D179SM3

150 x 230mm Beartex Aluminium Oxide Hand Pads (Green – Fine) • Used for cleaning and finishing • Removal of marks, stains, accumulations of rust and corrosion from metals. Surface preparation prior to painting or coating • Economical, tough and flexible. 66261079600 Also Available: Part No Size Price 66261074700 150 x 230mm Maroon $2.60 66261074000 150 x 230mm

Dark Tan Heavy Duty $8.50

360X Drill Bit Sharpening Machine • 240V • Sharpen drill bits as easily as you sharpen pencils! • 2.5mm - 13mm drill bit capacity • 118º sharpening angle • Diamond sharpening wheel. DD360X

165

$

3pce Step Drill Set

3pce Countersink Set

• Sizes 4-12mm, 4-20mm & 6-30mm • Self starting split point no pilot drill needed • Premium M2HSS material titanium nitride coated for superior durability • Drills & de-burrs in one process.

STPSET3

• 90° three flute • Sizes 8.3, 12.4 and 20.5mm • Made from high speed steel.

107CS0003

BONUS Industrial Snips

41

$

95

29-703

159

$

BONUS 25g Venom Cutting Paste

• Excellent for manually sharpening chainsaw chains • Saw tooth & depth gauge are sharpened in one work step.

Part No Size 11098040 4.0mm 11098048 4.8mm 11098051 5.1mm 11098055 5.5mm

• High speed steel Pack 10 Pack 100 $21.50 $174 $21.50 $174 $21.50 $174 $28.50 $229 $28.50 $229 $28.50 $229

149

$

FROM

EACH

16

$

$

• Sizes 1.0-13.0 x 0.5mm. D101MTLSM3

$

350mm (14") Chop Saw Wheel

220

• Designed for cleaning and conditioning before and after welding • Ideal for rust, paint, and epoxy coating removal and metal fabrication applications. 66261030651 Also Available: Part No Size Price 66261009649 115mm $22 66261030655 125mm $22 66261009586 180mm $36

199

25pce HSS Jobber Drill Set

$

100mm Beartex Rapid Strip Disc – Silicon Carbide (Black)

BONUS Carry Bag DD-BAG

55

$

Chain Sharp

M8000400

HSS Tap Set • Taps: M3, M4, M5 & M6 (taper, inter & bottoming) M8, M10 & M12 (taper & bottoming) • Tapping drills: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 & 10.2mm • Tap wrench included. T901HM26

249

$

4995

$

Recoil Range Kit Metric

EACH

229

$

• M5-M12.

RC35004R

159

$

BONUS Industrial Snips 29-703

5pce Carbide Burr Set • SB-3, SC-3, SC-5, SF-3, SF-5 Double Cut. BURRSET1

Knife & Tool Sharpener • 240V • Flexible abrasive sharpening belts • Precision sharpening guides - 2 x 25° Outdoor knife guides and 2 x 20° Kitchen knife guides • Includes 80, 220 & 6000 grit sharpening belts.

WSKTS-I

1450

Viper S9 Electrician's Holesaw Set

$

2490

$

199

$

1490

185mm (7") Black Panther Industrial Snips

Auto-Loading Retractable Knife

6

BONUS Engineering Black Book

CUTTING & DRILLING

ABRASIVES SURFACE CONDITIONING

L M E T AE CAS

ed Limit !

Stock

• Heavy duty all metal construction with smooth reliable mechanism • Unique shape for superior grip & control. 112-1

$

• Comfort grip ergonomically designed handles • Stainless steel serrated edge blades for increased cutting capacity • Ideal for multiple applications. 29-701 Also Available: Part No Size Price 29-700 200mm (8") $29.90 29-702 185mm High Tensile $39.90

Visit www.aisnational.com.au for your nearest store & more

250ml Venom Cutting & Lubricating Fluid • Reduces torque & friction • Extends tool life • Improves surface finish • Low odour. M8000250 nd us on Fi

fa

cebook

INDUSTRY TOUGH TOOLS FOR ALL

• Holesaws: 16, 20, 25, 32, 40 & 51mm, arbors: VA1 & VA3, pilot drill: 2x BD24 (1/4” x 83mm long) • Suits a variety of applications • Made from bi-metal HSS. H114S9

79

$

13pce Hole Dozer Hole Saw Set • Size ranges from 19 up to 64mm • Includes 2 arbors, 2 pilot drills and carry case. 49224025

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

179

$

7

FROM

• For general purpose clamping applications • Swivel pad ensures even pressure is applied on angular work pieces .

2095

$

FROM

35

$ F Clamp • Cast iron malleable head • Serrated grooves on corrosion resistant nickel plated bar.

Part No EC-SCR8 EC-SCR12 EC-SCR24 EC-SCR32

Size 200mm (8") 300mm (12") 600mm (24") 800mm (32")

Part No ECG16CS ECG20CS ECG25CS ECG40CS ECG60CS

Price $20.95 $23.95 $31.95 $36.95

Size Price 160 x 80mm, 300kg $35 300 x 100mm, 450kg $44.95 250 x 120mm, 550kg $57.95 400 x 175mm, 1000kg $95.00 600 x 120mm, 750kg $109.00

$

5pce Thru Tang Chisel Set

129

$

• Sizes 6, 12, 18, 25 & 32mm • Made in England. 2-16-269

BONUS Profold Pocket Knife

3037

32

$

95

3pce 200mm (8") Ergo File Set • File handle developed according to the scientific ERGO process • For filing flat surfaces, sharp corners and deburring. 1-473-08-2-2

BONUS BONUS Riggers Gloves

79

$ 10pce Screwdriver Set • Acetate handles • Chrome vanadium steel SSA01-10

$

200mm High Leverage Diagonal Cutter

6995

4495

$

200mm Insulated Combination Pliers

• High cutting performance with minimum effort • Suitable for many sorts of wire including piano wire • Chrome vanadium heavy-duty steel, forged, oil-hardened 7402200 Also Available: 7402250 250mm $79.95

5995 WARREN & BROWN PRECISION TOOLS

6395

$

5795

$ 9pce Hex Key Sets • Heavy duty chrome molybdenum steel construction • Hardened, chrome plated & powdercoated • Polished & chamfered finish.

Part No Size Price K5042 AF $39.95 K5043 Metric $39.95 K5044 Tamperproof Torx $39.95 K5009 Torx $39.95

$

3995

$

Metric/AF Ball End Hex Key Set

• Improved leverage & grip • Handy stand with hang holes for wall mounting • Sizes:2,2.5,3,4,5,6,8,10mm CHKT8 Also Available: CHKT81 8pce AF Ball Point T-Handle Set $57.95

FROM

25

Wrecking Bars • Forged, high-carbon steel • Tri-lobe design increases strength, durability and ease of use

8

Part No 55-101 55-102 55-103

Size 355mm (14") 610mm (24") 914mm (36")

Price $25 $35 $45

$

69

• Vertical & horizontal serrated teeth, which provide a non-slip gripping mechanism for removing rusted or damaged screw heads. PZ59

69

• Ball tip allows a 25° angle insertion • Made from high torque protanium steel • ProGuard finish 5 times more protection against rust • Life time warranty 20199

4pce Pry Bar Set

$

204mm Screw Removal Pliers

BONUS BONUS Riggers Gloves

3pce Locking Plier Set

8pce Metric T-Handle Ball Point Hex Key Set

59

Extendable Indexing Pry Bar

• Includes 125mm & 250mm curved jaw locking pliers, 150mm long nose locking pliers.

73

250mm (10") Aluminium Pipe Wrench 220mm Wide Jaw Adjustable Wrench • Wider opening jaw and shorter handle for accessibility • Comfortable non-slip thermoplastic grip handle 9031

4995

$

55

$

• Cast aluminium • 40% lighter • Drop forged jaws • I beam handle design. 2074110 Also Available: Part No Size Price 2074112 300mm (12") $38.95 2074118 450mm (18") $72.00 2074124 600mm (24") $112.00 2074136 900mm (36") $223.00

PROFESSIONAL TOOLS

BONUS BONUS Magnetic Holder SP30904

• Indexible to 180° for greater leverage • 14 locking positions • Extends from 457mm to 736mm 82220 Also Available: 82248 736mm (29") to 1219mm (48") $149

We pride ourselves on excellent customer service

2795

$

3870-Glove

• Hardened & tempered blades • Includes 1/4x8”,3/8”x12”, 7/16”x18”, 7/16”x24” SP30804LE

$

• Box-joint design gives high stability • Self-locking on pipes and nuts • Chrome Vanadium electric steel, oil-hardened and tempered.

8701250 Also Available: Part No Size Price 8701300 300mm $89 8701400 400mm $149 8701560 500mm $239

$ • Anvil and knife cutting edge • Insulated to 1000V • Made in U.S.A. 3248

3995

6495

250mm Cobra® Water Pump Pliers

• Cutting edges for soft and hard wire • Also suitable for twisting and cutting binding wire 6801200 Also Available: 6801280 280mm $52.95

• 1000V • Heavy duty, long cutting edges for thicker cables • 35% less effort required than with conventional combination pliers 0206200

$

• High impact cellulose acetate handles with continuous Thru-Tang shaft and striking end cap • Blade and Philips head assortment K5058

$

200mm End Cutting Nipper

Linesman's Electricians Pliers

3870-Glove

12pce Thru Tang Screwdriver Set

6995

HAND TOOLS

HAND TOOLS

MADE IN GERMANY

General Purpose F Clamp

nd us on Fi

fa

cebook

E IN MAD AN P JA

• Durable jaws forged from high tensile alloy steel, heat treated & suitable for cutting hard materials • Recommended for heavy duty use.

HITNBC0350H Also Available: Part No Size Price HITNBC0600H 600mm $99 HITNBC0750H 750mm $135 HITNBC0900H 900mm $159

FROM

3995

$

350mm High Tensile Bolt Cutters

Metric Ratchet Podgers • Dual sized ratcheting socket – two sizes in one • Reliable in-built reverse ratcheting lever function for easy direction change • Premium quality drop forged chrome vanadium steel.

5995

$

INDUSTRY TOUGH TOOLS FOR ALL

Part No Description 301228 18x24mm 301230 19x24mm 301243 21x24mm 301235 24x27mm

Price $39.95 $42.95 $42.95 $57.95

Part No Description 301234 24x30mm 301236 27x32mm 301238 32x36mm

Price $64.95 $69.00 $69.00

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

9

99

119

$ 3pce Reversible Ratchet Spanner Set

199

$

$

• Sizes 6 to 19mm • Anti-slip design. SCMT22210 Also Available: SCMT22410 13pce AF Spanner Set $00.00

12pce Metric Ratcheting Spanner Set • Reversible • Sizes 8-19mm. 9620N

BONUS 5pc Impact Socket Set

BONUS 6pce Geared Stubby Spanner Set

14pce Metric Spanner Set

• Sizes 8mm - 19mm • Four sizes in each spanner • Dynamic drive • Storage pouch included. S4RM/3T

95pce Metric/AF Tool Kit

SP-1145EXB

SP20390

HAND TOOLS

HAND TOOLS

1949

$

BONUS Impact Wrench

SCMT22294

299

$

• 1/4", 3/8" & 1/2"Dr socket set with ratchet handles & accessories • 20pce spanner set • 11pce ratcheting bit set • Hacksaw • Ball pein hammer. SCMT10148

255pce Metric/AF Tool Kit • 1/4" 3/8" & 1/2" Dr sockets & accessories • Includes spanners, pliers screwdriver sets & other asstd tools.

SP50125LE

59

1649

$

$

14pce 1/2"Dr Metric Impact Socket Set • 6pt sockets • Sizes 10-19, 21, 22, 24 & 27mm. 607201401 Also Available: 605221402 14pce 1/2"Dr Metric Deep Impact Socket Set $89

79

239

$

SCMT50400

10pce 1/2"Dr Metric In Hex Impact Socket Set • Sizes 6, 7, 8, 10, 12, 14, 15, 17, 18 & 19mm. 648251001

34pce 1/2"Dr Metric Tool Kit

40pce 1/2"Dr Metric/AF LOK-ON™ Socket Set • 18 metric sockets, size range 8 to 32mm • 15 AF sockets, size range 3/8 to 1-1/4" • Includes ratchet & accessories. K2042

249

$

129

1849

165pce Metric/AF Tool Kit

BONUS Socket Set 10pce 1/2" Dr Deep Metric Sockets. 80712

79

$

42pce 1/4 & 3/8"Dr Metric/AF Socket set

48pce 1/4"Dr Metric/AF Socket Set

• Metric size range 4 to 19mm • AF size range 3/16 to 3/4" • Includes 1/4 & 3/8”Dr ratchets & other asstd accessories. SP20601

• 12 metric sockets • 10 AF sockets • 18pce bit set • Includes ratchet handle & accessories. K2145

198pce Metric/AF Tool Kit • 1/4", 3/8" & 1/2"Dr socket set and accessories • Ring & open end spanners • Includes adjustable wrenches, screwdrivers & other assorted tools. SCMT10133

249

$

279pce Metric/AF Truck Box Tool Kit

119

199

• 1/2"Dr socket set with size ranging from 8 to 32mm sockets • 15 open end spanners, 13 ring spanners and 27 combination spanners • Screwdriver set • Plier set • Hex key set • Includes other assorted tools. SCMT10122

218pce Metric/AF Tool Kit

$ $

92pce Metric Tool Kit • 1/4 & 1/2"Dr socket set & accessories • Includes flex head & combination wrenches and bit set.

S910

$

• 18 metric sockets, ranging in sizes from 8 to 32mm, includes ratchet handle and extension bars • 11pce reversible ratcheting wrench set. 83062

$

BONUS Creeper

$

• 1/4, 3/8 & 1/2"Dr socket set & accessories • Includes combination wrenches plus many other assorted tools.

SP50121

• 1/4, 3/8 & 1/2" Dr sockets & accessories • 8pce torque master screwdrivers • 17pce metric combination spanners • 11pce pliers & tin snips • 4pce adjustable wrench & locking pliers, plus other assorted tools.

K1255

995

$

59pce 1/4, 3/8 & 1/2"Dr Metric/AF Socket Set

10

BONUS 300mm Adjustable Wrench

• Metric & AF sockets ranging from 4-32mm and 1/4" to 1-1/4" • Includes ratchet handles and other assted accessories. SP20280LE

SP18072

199

$ 26pce 3/4"Dr Metric/AF Socket Set

• Size range 22 to 50mm and 7/8" to 2" • 495mm 3/4"Dr ratchet & asstd accessories • Chrome mirror polish finish • Life time warranty against faulty workmanship or materials. T820400

The right price & practical advice

BONUS Biante Car

2699

$

24pce 1/2"Dr Metric/AF Socket Set • 9 metric sockets, size range 10 to 19mm • 11 AF sockets, size range 7/16 to 1" • Includes ratchet & accessories. SCMT14110B nd us on Fi

fa

cebook

11 Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions.

Accessories shown with products are not included unless specified. Colours may differ from images shown.

HAND TOOLS

PRECISION TOOLS

• Dual scale torque wrench 10 - 150Ft-lb, 13.60 - 203.50Nm • Easy locking & grip handle. MTW150F

3/8"Dr Torque Wrench • 1-25Nm • Dual audible & visual signals -see and hear when wrench has reached the selected torque • Strong and durable all steel construction • Made in Australia. 320500 Also Available: 323500 1/2"Dr 30-300Nm $289

109

$

149

239

Automatic Levelling Laser Kit

Auto Levelling Indoor Plumb Dot Laser

• LR700 Receiver and small lightweight elevating tripod in a clam shell case. A60422

• Auto levelling • Pendulum lock protection • Magnetic mount.

PLUMB1

599

$

109

139

$

$

• Ideal for most sizes & varieties of rivets.

MR100CG

49 Threaded Insert Setting Tool Kit

68pce Nut Riveter Kit • 6 x mandrels (M3, M4, M5, M6, M8, M10) • Includes 60 zinc coated steel rivet nut inserts (10 of each size). K4900

• Designed for quick, manual insertion of permanent load bearing threads in materials from 0.20" to 0.128" • Includes 4, 5, 6 & 8mm nose bushes, mandrels & threaded nutserts. EC-2745

Multi Line Laser Level & Tripod

• Cross line and plumb spot beam • Wide beam angle for maximum coverage • High intensity, high visibility laser line • Auto levelling with out-of-level warning • Weather resistant housing • Magnetic universal mount. LCL4BT

Self Levelling Cross Line Laser • 20m range • Accuracy +/- 2.0mm at 10m. DL3

Auto Levelling Rotating Laser Level

$

299

$

• Professional quality rotating laser • Horizontal & vertical operation • Dual LCD display receiver • Ni-mh rechargeable batteries & charger • Also operates on standard "AA" batteries • Laser enhancement glasses & target • Hard shell carry case. ARL509

999

$

MEASURING

8m x 25mm Tape Measure

2495

$

• Easy to read white blade with red and black markings • Reinforced end hook • Removable belt clip • Built-in shock absorbing bumper.

UW148SI10 Also Available: UW148ME10 8M/26’ $24.95

5795

$

1250

$

30m Tape Measure

• 5:1 Gear ratio for quick blade return • Impact resistant bi-material case • Carabiner belt attachment • Stainless steel crank. 34-138

2399

$

Electronic Self Levelling Laser • Horizontal/vertical rotation for levelling & alignment • Electronic dual grade • Includes heavy duty receiver and smart remote control • 5 Year RedBack Warranty. DGL1010VS

8m Measuring Tape • Tylon™ blade coating for durability • Matte finish blade reduces glare/ reflection • Tru-Zero™ hook. 30-393

299

$

LBB830

$

$

Heavy Duty Contractor Grade Riveter

BONUS 8m Big Boss Tape Measure

399

$

MEASURING

WE HAVE ALL YOUR LASER MEASURING NEEDS COVERED

WARREN & BROWN

1/2" Square Drive Micrometer Torque Wrench

Electronic Self Levelling Laser • Horizontal rotation for levelling • Vibration & tilt features • 5 Year RedBack warranty.

EL614S

1200mm Big Boss Level with Bag

99

$ 150mm Engineers Precision Rule • Made from stainless steel • 1mm and 0.5mm graduations • Conversion charts on reverse side.

267MS1015 Also Available: Part No Size Price 267MS1030 300mm $7.95 267MS1060 600mm $19.95 267MS1100 1000mm $34.95

12

395

2495

$

99

$

300mm Combination Square • Stainless steel with brass knurl and scriber head. LCS12

149

$

$ 150mm Digital Vernier Caliper

Laser Distance Measure

• Large easy to read LCD screen • Four way measurement; internal, external, depth and step • Zero setting at any position.

K11100

• Pocket sized for quick and accurate measurements.

L1-30

AIS gift vouchers - perfect for the trade professionals

nd us on Fi

fa

cebook

INDUSTRY TOUGH TOOLS FOR ALL

Tripod & Staff Package • HDF94 tripod • 240CM3S staff. 240HDF

• Over sized centre bubble • Includes nylon carry bag.

LBBL120 Also Available: Part No Size Price LBBL60 600mm $34.95 LBBL200 2000mm $85.00

5495

$

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

13

159

$

39

$ $

11

$

95

PAIR

69

Kevlar Stitch Welders Glove • High quality red cow split leather • Kevlar stitched to withstand high temperatures for longer periods • Lined & welted • 406mm (16") long for forearm protection. BRW16E

400g Propane Kit • Kit with trigger start, adjustable webbed flame torch & propane cylinder • Ideal for soft soldering • Instant-on trigger ignition for easy lighting.

WK2301TK

4995

Stealth V Electronic Welding Helmet • Viewing area 92mm x 42mm • Shade Adjustable from shades 9-13 • Switching speed 1/15000s. 700141

Welding Curtain • 0.4mm thick to meet CE standards & Aus/NZ safety requirements • Screens are transparent & resistant to UV rays, flame & abrasion • Kevlar sewn and grommets at 270mm intervals • Frame sold separately. XARWC Also Available: Part No Description Price XAGWC Green Curtain $49 XABSF Frame $110

300A Ground/Earth Clamp • Magnet strength: 40kg • Overall height: 2.3in/57mm • Magnetic pole footprint: 40mm diameter. 8100746

• Compact, economic, lightweight & cost effective alternative to large size cylinders.

600032 Also Available: Part No 2L Gas Bottle 600033 Argon/CO2 600034 CO2

895

$

18

$

$

59

$

Also Available: Part No Clyinder size Price 1811220 400g Tall boy

Propane $15 1811420 40g Oxygen $29

330g Butane/ Propane Cylinder • Screw on fitting • 70% butane, 30% propane for better heat transfer than butane.

1811610

43

$

69

EACH

$

154

$

17V TIG Torch & Flowmeter Kit •Suregrip 17V TIG can be connected to inverter ARC welders making the welder more versatile. KTIG35/50

Oxy/Acet Welding & Cutting Kit • Ready to go kit • Welds up to 9mm • Cuts to a thickness of 150mm • European made • Reusable cooler bag. 4400327

Minimig 180 Welder • 35-180A • Single phase 240V • 1-5kg spool capacity • Gas/Gasless • Euro connect torch • Spool gun ready • Thermal overload protection • 1 roll gas shielded & 1 roll gasless wire • 2 year warranty. KMM180

469

$

349

$

389

Powercraft 130 Inverter • Built-in VRD - Increases operator safety in environments with increased hazard of electric shock • Generator Compatible - Ideal for site work • Built in 'Hot Start' - For excellent arc stricking • IGBT Technology - For high reliability • Ready to Weld accessories included • True 10 Amp rated input. K69016-1

Weldarc 200i AC/DC ARC/TIG Welder

• Multiple pass applications • Thicker gauges of galvanised & mild steel • No shielding gas is required. 200355

42

• Smooth running, $ low hydrogen electrode 2.5kg Pack • All positional (except vertical down) • For pipe welding, single sided weld joints & maintenance applications • Has exceptional arc stability & weldability 16TC25 Also Available: Part No Size Price 16TC32 3.2mm 5kg $62 16TC40 4.0mm 5kg $59

1599

OXYGEN / LPG Gas Cutting & Brazing Kit •Ready to use kit •Includes 4 flash back arrestors. KKOXY-2

Visit www.aisnational.com.au for your nearest store & more

nd us on Fi

fa

cebook

Welding Gas

Also Available: Part No Size Price 200353 0.8mm $79 200356 1.2mm $70

Gemini 13 2.6mm Electrodes • Rutile type electrode used for all general fabrication work. 100030

• Argon, Argon Mix & Oxygen • Available at selected stores.

1495

$

2kg Pack

Also Available: Part No Size Price 100031 3.2mm $33 100032 4.0mm $29

799

$

1450

$

Weldmatic 250i MIG & Multi-Process Welder

• Compact, portable inverter • 200A AC or DC TIG • AC TIG for aluminium • 170A stick welder • HF pulse start or lift-arc start • Pulse TIG • Suits 2-4.0mm electrodes • 15A 240 VAC supply • 2yr unlimited warranty (power source only). MC105-0

180A Mig Welding Pack

• Versatile, portable inverter with VRD • Single phase, multi-process inverter capable of handling MIG, stick & lift-TIG processes • 250A of MIG, the Weldmatic 250i is suitable for construction sites, automotive panel repair and exhaust repair • 2yr unlimited warranty (power source only). CP138-1

250A MIG/TIG/MMA DC Inverter Welder

• 240V • Portable • Ideal for light fabrication, maintenance & repair. Euro connect torch • Solid metal drive assembly • Gas or gasless • Spool gun ready • Thermal overload • 6 voltage settings • Fan cooled • Includes auto darkening helmet, gloves, wire spools and trolley.

600186BUNDLE

5399

$

• 240V • Latest IGBT inverter technology • MIG/MAG with gas/gasless wire function • MMA $ (stick electrode) (DC+ / DC-) function • Digital V/Amp meter display • Spool gun ready • Euro style MIG torch connection • Stepless voltage and wire feed control • Lift arc DC TIG welding • Wire inch and burn back functions. KUMJR250K-SG

1549

• Excellent MIG welding with CO2 gas • Euro style MIG torch connection • Internal wire feeder, gear driven • 1-5kg spools • Adjustable burn back • Spool gun connection • Stepless voltage & wire feed control • Stick electrode (MMA) function • VRD (Voltage Reduction Device) • Excellent arc stability with all electrode • Hot start, anti stick • Industrial rated • Tolerant to variable power supply. KUMJRRW200MIG

75

$

Gasless 11 Mig x 0.9mm x 4.5kg Wire

1599

$ Powerplus 350HD • Input Power 415/3/50/60 • Rated Output 350A/31.5V@60%, 270A/27.5V@100% • Input Current 23.5A • Output Range 50-400A • Infinitely variable voltage selection • LF33 wire feeder. K60093-1P

Multi-process Inverter • Ready to weld out of the box • MIG,TIG and Stick Welder • Built in VRD (Voltage Reduction Device) for additional operator safety • Thermally protected for longer life. K69034-1

3450

$

200A DC Inverter Welder

$

• 10Amp primary input plug • Latest IGBT inverter technology • MMA (stick electrode) • DC TIG with lift arc ignition • Hot start (improves electrode striking) • Generator compatible (recommend 6.0 KVA minimum) • Arc Force • Excellent arc 14 stability • Thermal overload protection. KUMJR130CA

Austarc 16TC 2.5mm Electrodes

1399

$

$ 95

399

$

ARC 130DC MMA/TIG Inverter With Carry Case

• Magnet Strength:40kg • Overall Height: 2.1 in/53.6mm • Magnetic Pole Footprint: 59.5 x 32mm. 8100352

• Magnet Strength:181kg • Overall Height: 3.6in/90.7mm • Magnetic Pole Footprint: 64x 41.26mm. 8100238 Also Available: 8100106 600 $231

• 240V • IGBT Inverter Technology • Digital Control • Dinse 35/50 Lead connection • Suits 5Kg (D200) MIG Spools • 2 roll wire feed System • Spool Gun ready. 600585

499

• For use with disposable gas bottles. 600044

Mini Angle

Multi Function Welder

$

Regulator with Gauge

MagSquare 400

2L Pure Argon Disposable Gas Bottle

400g Map-Pro Cylinder • Faster heat transfer than propane • Ideal for heavy duty brazing and light welding.

1811120

WELDING

WELDING

49

$

BONUS Electrodes, Auto helmet & Gloves

1499

$

999

$

200A Ac/Dc Tig/Mma Digital Welding Inverter

• IGBT Inverter Technology • Digital LCD Display • Dinse 35/50 Lead connections • Simple to operate • 2T/4T Trigger latching function • Fully adjustable pulse. 660200BONUS

INDUSTRY TOUGH TOOLS FOR ALL

Weldmatic 350i MIG & Multi-Process Welder • 350A • Industrial 3 phase, multi-process welder capable of handling MIG, Stick, Arc Air Gouging & TIG Lift Arc processes.

• Ideal choice for medium to heavy industrial fabrication • Built in operator safety • Suits gas shielded & flux cored wires • Variable arc control • 3yr warranty. CP139-1

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

15

110

$

37

$

199

500A Portable Jump Starter/Power Supply

2.4m Anti-Zap Jumper Leads

Digital Battery & System Tester

• Crimped, fully insulated 400 Amp clamps • Three function 12V Antizap: Correct connection, Incorrect • Connection, high speed surge protection. MASS100AZ

• Can test batteries from 200 to 1200 CCA • Will test batteries with a charge level down to 7V • Easy to operate • No batteries required • Micro designed for pocket storage. BT222

$

• Jump starts cars, trucks & motorcycles • Power or charge 19V laptops, 12V accessories and any USB 5V electronics • 14 interchangeable tips and cords to connect to most electronic devices & well as mini-jumper clamps • Hi power LED flashlight with S.O.S flash pattern. SP61070

29

$

• Protects metal from rust & corrosion • Penetrates stuck parts • Displaces moisture, removes grease, grime, surface rust, & other marks from most surfaces • Breaks through rust & corrosion • Lubricates • Eliminates moisture induced short circuits • Cleans scale, dirt, grease & tar from painted surfaces. 61004 Also Available: 45040 4L $39.95

400g Lanolin Multi Purpose Lubricant

1495

$

895

$

500ml Lanolin Type A Grease • Sealant for timber joints and bridge bearers, timber end grain protection • Moisture proofing of multi pin plugs • Food grade • Salt spray tested to AS 2331.3.1. GS\0501

• Lubricant for drilling, tapping & machining • Protects electrical equipment & components including circuit boards, air conditioners • Non conductive to 70kV • Food Grade (AQIS & HACCP Accredited).

GP\PP-0401

Copper Anti-Seize Compound

1195

$

25

Quick Release Grease Gun Coupler

Jumper Leads Anti Zap • Double insulated fine strand cable for superior flexibility & performance • 4m • Nitrile modified PVC sheath • High temp resistance (up to 105ºC) • Crimped, heavy gauge solid copper lugs • Fully insulated 600A clamps • 4 function Antizap: correct connection, incorrect connection, low donor battery & high speed surge protection. MA254AZ

109

$

$

• Ideal for high pressure, heavy duty greasing • Max. working pressure of 10,000psi (690 bar) • 1/8"BSP • Sliding sleeve locks coupler onto nipple • No need to hold while greasing. 14512

Jump Starter 12V

280

$

369

$

• Professional quality unit designed for workshop conditions • Heavy duty clamps & robust case • High performance long life batteries • Suitable for 12V systems • Reverse polarity protection • 1700A peak • 500CCA • Dead start function • Fully insulated clamps. MA1700

99

K45 Lever Action Grease Gun

34

$

• 450g cartridge • High pressure/high volume • 12,000psi • Bulk filling or transfer pump loading • 150mm rigid extension & KY SUPERGRIP™ coupler.

K45-01

Infinite Intelligent Battery Charger

99

$

LED Magbase Work Light USB Rechargeable Penlight

• Magnetic base • Super bright 250 lumen • Up to 250% brighter than normal LED. SP81456

Digital Multimeter • AC/DC voltage (max 600VAC/600VDC) • DC current (max 10A), resistance, diode test, temperature continuity. SP62012

janitorial

• Delivery rates of up to 0.9 kg/min • Will handle high density, tacky greases up to NLGI2 • Can be used on a variety of drum sizes and types • Single toggle air motor operation ensures a long service life. 424170

2695

$

1099

$ 200L Lockable Diesel Tank with Pump

20kg Grease Kit

29

• Clean replacement for anti-seize compounds • Temperature: up to 1168°C • Apply to bolts, spark plugs, light fittings, valve shafts and other threaded assemblies. T4HCA00 Also Available: T4HN001 Nickel $35.00

• 6/12/24V charger • 2/10/20A selectable on 6/12V • 2/5/10A selectable on 24V • Electronic touch button control • Chemistry selectable: GEL, flooded (SLA, deep cycle, AGM), calcium • LED display. IR61224

999

$

Copper Anti-Seize Tape

$

$

16

• Prevents corrosion, rust, pitting, galling, fusion and breakage of threaded components even to high temperatures. CT004 Also Available: CT005 Nickel Coloured $39.00

lubrication

lighting & electrical

WD-40 425g Multi-Use Product

330

$ Mechanical Diesel Meter

• Suitable for the metering of diesel • Accurate between 20 to 120L/min • Accurate to +/_1.0% • 1”BSP (f) inlet/outlet • Max batch total of 999L • Gravity feed or pump. 51008 Also Available: 51007 4 Digit Mechanical Fuel Meter $353

• 2 settings • Up to 8 hrs run time. SCMT65010

• Tiedown capability • Hose assembly is not exposed & therefore cannot be cut & fuel syphoned off • Italian pump & nozzle kit • Sized to fit in the back of popular brands of utes & twin cabs • On/off & metering nozzles options.

L20040PA Also Available: L20040PAM with Meter $1287

115

$

129

$

20L Pump Scrubber Hand Cleaner • Dissolves grease paint rubber & carbon black • Pump prevents cross contamination mess and wastage.

379JP

1295

$

500ml Citrus Clean Spray • Graffiti remover • 100% natural • Orange peel oil & sugar cane juice • Dissolves adhesives, tar, crayon & ink.

260C

500ml Tuff Auto & Outdoor Cleaner/ $ Degreaser • 100% Australian Made and owned • Natural environmentally friendly bio degradable formula • Dries leaving a non-slip surface • Ideal for dissolving carbon, oils and grease in domestic, industrial and mechanical applications. 930C

20L Oil Pump

7

95

750ml W66 All-Purpose Surface & Glass Cleaner

• Hand operated • Suits most 20L drum sizes • 1.5m of PVC hose with anti-kink springs • Includes 2 additional drum thread adaptors $ • Pump primes easily • Delivers on down stroke for easy operation • Nozzle holder with drain-back feature built into bung adaptor. L-DP20J

995

$

• Fast streak free cleaning • Quick drying and no residue • All purpose cleaner for all surfaces • Contains an Anti-static agent to repel dust and lint • Antibacterial formula • Ideal fabric cleaner. 066S

We pride ourselves on excellent customer service

37

nd us on Fi

fa

cebook

450g Trigger Action Grease Gun & Carry Case

123

$

C7 Multi-Purpose Heavy Duty Gear Oil Pump • Multi-purpose gear oil pump for use with a variety of service fluids • Suitable for 20/25Lt drums using sliding bung adaptor • Up to 100ml per stroke • 1.8m delivery hose & non-drip nozzle.

C7-01

INDUSTRY TOUGH TOOLS FOR ALL

• Grease pressures of up to 8,500psi (586bar) • High volume or high pressure option • Ever-Flow System enables the use of thick tacky greases even in the coldest conditions • Convenient & handy storage for an extra grease cartridge. 660ANP

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

WITH CASE

17

BONUS Gloves

M7-ZB812L

BONUS Bag

M7-ZB812L

295

$

1/2” Drive Impact Wrench

1/2” Drive Impact Wrench

• Lightweight - Only 1.8kg • Low noise level - Only 85dB • Powerful - 1100ft-lb Max Torque •25mm Bolt Capacity • 5.1 CFM Air Consumption • 141mm Overall length • Balanced weighted body • Extra heavy duty construction. m7-nc4256q

• Lightweight - Only 1.7kg • Low noise level - Only 85dB • Powerful 1200ft-lb Max Torque • 25mm Bolt Capacity • 4.8 CFM Air Consumption • 179mm Overall length • Magnesium alloy & composite material and construction. M7-NC4255Q

290

499

• Adjustable Nozzle regulates amount of sand required. SP65010

$

949

$

$

3/4" 1200ft-lb Impact Wrench

3/4" Impact Wrench Pistol Style

• Lightweight, only 2.68kg • Low noise level, only 83dB • Powerful 1200ft-lb max torque • 25mm bolt capacity • 5.5 CFM air consumption. M7-NC6236Q

• Torque Range: 200-1300ft-lb (271-1762Nm) • Free Speed: 4800RPM • Air Requirements: 5.4CFM • Overall Length: 215mm • Max torque at 5secs 1400ft-lb. M7-NC6217

BONUS 2 Pce Burrs

1 Litre Gun Sandblasting

899

Electric Direct Drive Compressor

Compact 14000 Electric Belt Drive Compressor

• Free air delivery @ 100psi 154L/min • 2.5HP 240V 10A • Pump 2,850RPM • 30L tank • Max 145psi • For home handyman use • Warranty 1yr total unit. 00332

1139

BONUS 5pc Impact Socket Set

149

SP20390

EACH

199

3.0HP 60Lt Belt Drive Trade Cast Triple Compressor

1/2" Drive Impact Wrench • Twin hammer mechanism provides balanced blow, reducing vibration and more torque • Bolt Busting Torque: 800Nm • Max Torque: 520Nm • 2.8kg. SP-1145EXB

3/16" Air Riveter • Includes 2.4, 3.2, 4.0 & 4.8mm tips • 1.49kg. SP-2306

• 10A • FAD 240L/min @ 100psi • Ideal for screw drivers, ½” ratchet wrenches & ½” impact guns • 5yr pump & 1yr motor warranty. 00092

00348

P17 Electric Belt Driven Compressor

229

• Rib textured handle •23,000RPM. SP-1210B Also Available: SP-2200AHB 1/4" right angled die grinder 21,000rpm

P13 Belt Drive Air Compressor

BONUS 20m Blue Air Hose

1399

$

1/4" Straight Die Grinder

• Free air delivery 220L/min @ 100psi • Motor 3HP 240V 10A • Pump 895RPM • Air receiver 50L • Max 145psi • For building trade use • Warranty 1yr total unit. 00344

$

NEW

$

699 $

$

$

75

00348

M7Z-ZC11

$

429

$

$

BONUS Bag

M7Z-ZC11

• Belt drive 3 cylinder cast iron pump •15amp / 240volt • 65L Australian approved tank • 150psi pressure • FAD:- 282 L/min • 3HP motor • High quality 1/4" BSP filter reg. XRS18

BONUS 20m Blue Air Hose

• Free air delivery 320L/min @ 100psi • Motor 3.2HP 240V 15A • Pump 963RPM • Air receiver 55L • For industrial use • Smart filter reduced start-up amps • Warranty 5yr pump, 1yr motor. 00087

P20HF Electric Belt Drive Compressor • 340LPM - Free Air Delivery • 145 Maximum PSI • 3.5 HP Motor - 15 AMP Power supply • 55L tank. 00007

899

118

1450

$

00348

$

$

BONUS 15m Superior Hybrid Air Hose

1195

$

COM 17681350

249

Compressors

Air Tools, Hoses & Fittings

BONUS Gloves

BONUS 20m Blue Air Hose

BONUS 15m Superior Hybrid Air Hose

COM 17681350

$

39

$

EL Series Air Hose Reel • 20m x 10mm ID PVC hose • High quality impact and UV resistant polypropylene covers • Hose guide system rewinds the hose without kinks • Constant speed control device ensures safe and accurate rewinding. HR40030 Also available HR40040 15m x 12mm ID $279

39

$

10mm x 14m Air/Water Reel • Postive hose latch- locks yours hose at any length • Built-in hose layering mechanism - hose rewinds safely with no bunching or kinks • UV Stabilised hose and case • Working pressure 174psi (12bar). L-PAW1014

20

$

Starta Cupla Combo Pack • 200 series 'One-touch' high quality, chrome plated steel cuplas includes • 5 x 20PM 1/4" BSP male • 2 x 20PF 1/4" BSP female • 2 x 200-20SM 1/4" BSP male. NC STARTA Also Available: NC STARTA 2 Includes 5 x 20PM, 2 x 20PF, 2 x 20020SM, 1 x 200-30SH, 1 x 30PH, 2 x OTK Clamps $59

18

3/8" Cupla Hose Kit • Includes 1 x 200-30SH • 1 x 30PH • 2 clamps.

NC 3/8 Also Available: NC 1/2 1/2" Cupla Hose Kit $25

The right price & practical advice

1750

$

BONUS 20m Blue Air Hose

15m x 10mm Fitted Air Hose (Nitto Style)

PHP15 Electric Belt Drive Compressor

• Ideal for workshop or worksite. I66-15N

• 300 LPM - Free Air delivery • 175 Maximum PSI • 3.5 HP Motor - 15 AMP Power Supply • 55 Litre Tank. 00100

00348

• 70L tank • Cast iron slow speed belt drive pump • 10A plug • German condor pressure switch • Liquid filled gauges • 1/4” filter regulator • Warranty; 5yr tank, 3yr pump, 1yr electric motor. COM E7025 BLACK

BONUS 15m Superior Hybrid Air Hose

3/8" (9.5mm) 10m Crimped Hose Assembly

Diameter 9.5mm 9.5mm 12.7mm 12.7mm 12.7mm

Length Price 20m $70 30m $94 10m $69 20m $99 30m $148

47

$

nd us on Fi

fa

cebook

• 70L tank • Cast iron slow speed pump • 760rpm belt drive • 1/4” filter regulator • 5yr tank warranty, 3yr pump warranty • 1yr electric motor warranty. COM E7035 BLACK

9990

​Full Feature Screw Compressor – Includes Screw, Dryer & Tank

160L Industrial Petrol Air Compressor • Cast iron slow speed 3 cylinder single stage pump • Receiver rated to 10 bar • 1/2" filter regulator included • 5yr tank warranty, 3yr pump warranty, 3yr Honda® engine warranty. COM P16013-H

3.5Hp Industrial Air Compressor

$

COM 17681350

• Lightweight, nonconductive, non-marking • UV stabilised • Fitted with genuine Nitto 200 Series 'One-touch’ cuplas • Cuplas made in Japan • Hose made in USA. HA200-30SHP10 Part No HA200-30SHP20 HA200-30SHP30 HA200-40SHP10 HA200-40HSP20 HA200-40HSP30

2.5HP Industrial Air Compressor

2850

$

INDUSTRY TOUGH TOOLS FOR ALL

• 1200 LPM - Free Air Delivery • 10 HP / 7.5 KW • 116 PSI / 8 BAR • 42.5 CFM • 65 dB (A). HQ10/8

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

19

material handling

generators & PUMPS

16

$

100mm Rubber / Nylon Swivel castor

595

3.4kVA Honda® Powered Petrol Generator

$ 2.4kVA Honda Powered Petrol Generator ®

• 2 x 15A outlets • Honda® GX200 engine • Lightweight and portable • Less than 6% harmonic distortion • Ideal for small appliances and small hand tools. TP34HSR Also available: TP59HSR 5.9kVA $1699 & TP80HSR 8.0kVA $2099

• Honda® GC160 engine • Lightweight & portable • Less than 6% distortion rate • Ideal for the trade or serious handyman. TP24HCR

999

$

BONUS Hose Kit FFK01-B

$

679

1.5" Honda® Powered High Pressure Fire Fighting Pump • New GP160 Honda® engine • Max flow 390L/min • Max head 74.5m • 1.5" inlet • 2 x 1" & 1 x 1.5" outlets • Sturdy roll over frame • Efficient, cost-effective pump ideal for fire protection & water transfer. MHGP15-SHP Also available: MH15SHP 1.5” High Pressure Fire Pump with Honda® GX160 Petrol Engine & Hose Kit. $0000

4.4KVA Workstation

2999

$

• GX270 Honda® engine • 20A RCD • 160A DC inverter welder • Compressor TP160-MINI

1949

$

15

179

$

• Wheel diameter 100mm • Wheel type institutional rubber tyre on nylon • Load capacity (kg) 70/60kg • Height (mm) 134mm S4710 Also available: S4710B with Brake $17.00

$

100mm Rigid Castor • Wheel type institutional rubber • Load capacity (kg) 70 • Height (mm) 134mm R4711

14

11

$

$

3.5kVA Inverter Generator

100mm Swivel Castor

•3500 Max AC output •3000 Max AC continuous output •212cc, 4 stroke •Electric start •Receptacles: 2 x 15a 240V 120 G3500I-L

• Wheel type: nylon • Load capacity 60kg • Height( mm) 134mm S4716 Also available: S4716B with Brake $16.00

100mm Rigid Nylon Castor

300kg Capacity Mighty Tough Hand Trolley • Manufactured using heavy duty steel pipe. MTR101 Also available: MTR100 300kg capacity trolley with puncture Proof Wheel $225

• Load capacity (kg) 70 • Height (mm) 134mm R4717

2599

$ 2.8kVA lnverter Generator

8.1 kVA Generator

PAINT & ADHESIVES

• Yamaha MZ175 engine • 2 x 15A outlets • Noise reducing muffler • Pure sine wave • Will safely run all electronic equipment • Economy mode • 11L fuel tank • 4yr factory warranty. EF2800I

2049

$

1995

• Honda GX390 13 Hp engine • Electric start with battery supplied.

• Alternator fitted with AVR (Automatic Voltage Regulator) • Fitted with RCD 120 G8100-HER

137

$

350

$

FROM

550

$

$

189

$

EACH

175

$

Mega Round Slings

94

• WLL indicator stripes • Complies to AS4497 • Colour coded to international lifting standards • Versatile lifting product.

$

0.75T Lever Hoist

20L Kerosene • High quality, commonly used as a surface cleaner, degreaser and heater fuel KERO20

50mm x18m Ultra Tough Black Gaffer Tape

48mm x 30m Silver Duct Tape

• Ultra tough heavy duty construction offers high strength weather resistance and yet easy to tear • Multiple uses. Ideal for securing, sealing, holding, repairing, binding and numerous other tasks. 63642548203

• Made from PVC to provide excellent stretch, conform-ability & durability • Ideal for a wide variety of applications in the home, office, industry and garden including the joining of plastic sheets and ducting. 63642548313

Part No MRS1000X1 MRS1000X2 MRS1000X3 MRS1000X4 MRS2000X1 MRS2000X2

Size Price 1000kg x1m $5.50 1000kg x 2m $9.50 1000kg x 3m $12.50 1000kg x 4m $16.50 2000kg x 1m $8.50 2000kg x 2m $12.50

Part No MRS2000X3 MRS2000X4 MRS3000X1 MRS3000X2 MRS3000X3 MRS3000X4

• Load limited to rated capacity • Meets local and international standards • All Steel construction GLH075 Also Available: Part No Description Price GLHLL150 1.5T $269

Size Price 2000kg x 3m $19.50 2000kg x 4m $26.50 3000kg x 1m $11.50 3000kg x 2m $19.50 3000kg x 3m $29.50 3000kg x 4m $35.50

8mm Double Leg Chain Sling • 8mm x 2m • 2000kg. CSA08227525 Also Available: Part No Description Price CSA08237545 8mm x 3m 2000kg $237 CSA10227525 10mm x 2m 3200kg $265 CSA10237545 10mm x 3m 3200kg $359

750

$

96

$

90

$

1195

$

20mm Eye Nut

1495

$

W.L.L 1.2T • "Gold" Zinc dichromate finish • Din 582. 359220 Also Available: Part No Size Price 359208 8mm $1.80 359210 10mm $2.50 359212 12mm $3.20 359216 16mm $4.40 359224 24mm $15.40

400g Cold Gal Aerosol

20L Enamel Thinner E250 • A solvent blend designed for the thinning of enamel type paints to enable spray application suitable for 20 both enamel primers and enamel top coats E20

20L Mineral Turpentine • A slower drying thinner than E250 • Can be used when temperatures exceed 30°c, to improve levelling, and maintain a good gloss. TURPS20

Quick Dry Spray Paint • Super enamel aerosol • Durable, lead free enamel paint for internal and exterior use QD2001

• Easy spray-on application • Zinc rich epoxy paint • Long term protection. CG400 Also Available: Part No Size Price CG500 500ml $29.95 CG1 1L $55.00 CG4 4L $189

AIS gift vouchers - perfect for the trade professional

nd us on Fi

fa

cebook

500kg x 3M 3G Industrial Chain Block • Complies to AS1418.2 • Colour coded to match international lifting standards • 3m lift height (other heights available upon request) • Ideal for mining, construction, workshops and heavy industry. 500053M Also Available: Part No Description Price 500103M 1T x 3m $159 500106M 1T x 6m $185 500203M 2T x 3m $239

1995

$

EACH

20mm Eye Bolt

$

690

WLL 1.20T • "Gold" dichromate finish • Din 580. 359120 Also Available: Part No Size W.L.L 359108 8mm 0.14T 359110 10mm 0.23T 359112 12mm 0.34T 359116 16mm 0.70T 359124 24mm 1.2T

Price $1.90 $2.60 $3.30 $4.50 $15.50

INDUSTRY TOUGH TOOLS FOR ALL

50mm x 9m Ratchet Tie Down • 2500kg lashing capacity • Complies to AS/NZS 4380-2001 • Complete with hook & keeper and 2 wear sleeves. RTD055PL Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

90

$

PACK OF 5

21

Safety

Safety

2495

$

380

$

4

$

Vision X Safety Glasses • Medium impact lens • Ultra light weight and comfortable • Anti scratch/anti fog lens • 99.9% UV protection • Great for contractor and visitor safety specs. FE001 Also Available: FE002 Smoke Lens $3.80ea

Vented Clear Lens Goggle

12

50

$

95

Safety Specs X-caliber Clear

Typhoon Safety Glasses

Browguard

• One piece polycarbonate-combining super lightweight & tough properties • Anti-scratch, anti- fog coatings • Medium impact resistance. FE900

• Clear lens • Medium impact, anti scratch and anti fog lens • Frameless and ultra lightweight • Adjustable arm height & length.

7000

• Ready assembled • 99.9% uv rated • High impact rated • Clear Visor.

BGVCE

• Co-injected and ventilated frame guarantees unequalled adaptability and comfort • Fits over prescription glasses • New CSP lens is an effective solution for all activities that alternate exposure between bright light and low light 1679110

Atom Platimum Clear Lens Goggle with Mouthguard

28

$

95

• Platinum Coating – High performance anti-fog and anti-scratch coating system is applied on both sides of lens • Low profile and lightweight 1652831

1695

$

Standard Roofers Kit • 1 x H101 essential harness • 1 x WLO1SNSN shock absorbing webbing lanyard single leg (2 x snap hook) • 1 x RKRG015 15m kernmantle rope c/w rope grab & thimble eye • 1 x HSASE2515 anchor strap endless 25mm - 1.5m • 1 x KSGA screw gate karabiner • 1 x HSKB710 kit bag. KITRSTD Also Available: H101 Essential Harness Only $75

FROM

21

$

EACH

1195

$

PAIR

1750

$

24

$

Kevlar Stitch Welders Gloves

3

$

• High quality red cow split leather • Kevlar stitched to withstand high temperatures for longer periods • Lined & welted • 406mm (16") long for forearm protection. BRW16E

95

PAIR

Ninja Glove Large • Excellent general purpose work glove • Wet & dry grip • Offers great protection with increased dexterity • Good abrasion resistance for long life.

P4001.L

Grippaz Disposable Nitrile Gloves GPAZB Also Available: L, XL

24

• Ultra-lightweight frame • Adjustable non-slip bridge • Straight, highly flexible ergonomic • Platinum coating – high performance anti-fog/anti-scratch coating system applied on both sides of clear, smoke and CSP lenses.

1676101 Also Available: Part No Description 1676102 Platinum Smoke Lens 1676118 Platinum CSP Lens

995

$ Vented Hard Hat

• Lightweight, colour range of vented hard hats • Available in white, yellow, red, blue, green, orange and fluoro yellow (colours can be assigned to location, job or industry). HHV6

• Wide range of Safety & warning signs. Ask in store.

2195

154

$

box of 10

95

Egard Pro5 Earmuff

P2 Valved Disposable Respirator

ProBullet Earplugs Pk of 50 Pairs

• Class 5, 30dB • Hi-vis colour for increased visibility • Padded headband for comfort • Complies AS/NZS 1270:2002. H500

• Class 5, SLC8027dB • Disposable, PU foam • Hearing protection for noise levels to 110 dB(A) • Trade pack of 50 pairs. EPOU-50

• Fast flow valve for easy breathing • Industrial quality grade materials • Lightweight • Twin elastic headbands for comfort • Full face seal • Adjustable nose bridge allows for snug fit • AS/NZS 1716:2012 certified. FR7712 Also Available: FR7710 Box of 20 P2 Non-valved respirators $24.95

59

Shock Absorbing Lanyard

$

PAIR

Slip-On Steel Toe Tradie Boot • Elastic boot • Steel cap • Anti-slip, oil resistant sole • Black • Assorted sizes available. MKTRADIE-BBF

• Webbing elasticised single leg • Includes snap hook & triple action scaff hook. WLE1SNSD

79

300mm Traffic Cone

Extruded Fort Barrier Mesh • Heavy duty safety fence designed for long term use • Roll size is 0.90 x 50m. TM-MESHP

59

$

• Reflective tape on slates for day\night use • Visible yellow colour • Suitable for indoors and outdoors• Legs can be filled with water for extra stability • Ideal for pedestrian and traffic control.

BAR003

135

$

• Bright Orange Traffic Cone • Ideal for schools, worksite, sporting grounds. TC300 Also Available: Part No Size Price TC450 450mm $11.95 TC700 700mm $22.95

2.4m Reflective Expanding Safety Barrier

22

229

$

Safety/Warning Signs

$

10

$ $

Silum Plus Platinum Clear Lens

box of 100

$

PAIR

PAIR

BONUS Rubber Tie Downs Pack 31" 340731

300mm

795

$

2.46 x 2.46m Cargo Safety Net

EACH

• UV stabilised • Integradted D rings • Multiple perimeter eyelets • Includes 4 rope ties & 4 cam buckles • Compliant design- tested to 1000kg • Trailer & accessories not included. NETSYS1 Also available Part No Size Price $ NETSYS2 2.8 X 2.84 $295 NETSYS3 2.8 X 3.44 $355

85

$

Visit www.aisnational.com.au for your nearest store & more

236

nd us on Fi

fa

cebook

Safety Boots • The Chippy Pen Boot is ideal for the tradesman wanting to ensure that they are protected from danger coming from above and below • Steel toecap and WELLMAX® penetration resistant sole for protection • PU midsole for a smooth cushioned ride • Assorted sizes available. MKCHIPPY-HHF

INDUSTRY TOUGH TOOLS FOR ALL

Lace Up Blast Work Boots- Honey • Nubuck full grain leather • Slip resistant • TPU outsole heat resistant to 150°C / 302°F • Water resistant • Steel toe • Assorted sizes available. MKBLAST-HHF

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

23

workshop gear

• 1400W • Stainless steel.

5970451 Also Available: 9274551 40L 1400W W/ Synchro. $249

BONUS Pack of Bags

99

$

9066129

High Speed Steel Cutters • Designed & made in Australia • High quality high speed steel • Thin wall for fast, precision holes • Onetouch shank for easy no tool replacement • Superior heat treatment • 25mm & 50mm depth cutters also available.

279

$

850pce Metric Internal Circlips Kit

199

$

• 8 to 50mm sizes • Includes circlip pliers. CA5010 Also Available: Part No Kit (Includes circlip pliers) CA5030 875pce Imperial Internal Circlips Kit CA5015 925pce Metric External Circlips Kit CA5035 875pce Imperial External Circlips Kit

18" Magnetic Super Sweeper Price $299 $299 $330

• Quick & easy option for removing metal pieces such as nuts, bolts, rivet ends, screws, drillings and swarf from workshop & factory floors • Convenient release handle for easy removal of debris • Adjustable handle size. MSS18

100mm Swivel Base Shop Vice • Manufactured from heavy duty 200 MPa castings for maximum strength • Hardened serrated steel jaws • 360° Swivel Base. 60231 Also Available: Part No Size Price 60232 125mm $199 60233 150mm $249

58

$

EACH

99

$

129

$

FROM

125mm Multi-Purpose Vice

169

$

Garage Creeper • Solid steel frame • 6 heavy duty wheels • Padded body & headrest • 1030 x 440mm. SPR-44

• Swivel base • Rotating head • Anvil • Pipe jaws • 125mm. 4935505

Part No Size WxD Price OT12206 12 x 20mm $58 OT13206 13 x 20mm $58 OT14206 14 x 20mm $58 OT15206 15 x 20mm $63 OT16206 16 x 20mm $63 OT17206 17 x 20mm $63 OT18206 18 x 20mm $66 OT19206 19 x 20mm $71 OT20206 20 x 20mm $71 OT21206 21 x 20mm $77 OT22206 22 x 20mm $77 OT23206 23 x 20mm $83 OT24206 24 x 20mm $83 OT25206 25 x 20mm $88 OT26206 26 x 20mm $88 OT27206 27 x 20mm $98 OT10-30CS Countersink $125

999

$

$

BONUS 16, 18, 22mm x 20mm Ozbroach Cutters Plus Backpack

BONUS 14, 18, 22mm Cutters Plus Pin ASSET-Z

Pro 35 Magnetic Base Drilling Machine • 920W • Quality, compact & robust European made machine • Lightweight, only 10kg • Ideal for onsite & overhead tasks • 35mm dia. & 52mm depth capacity • Magnetically attached through cutter coolant system. HMPRO35

Cordless 18V Magnetic Based Drill

• 12 to 27mm hole diameter capacity • 6 to 20mm plate thickness capacity • 430 min-1 no load speed • 65 × 126 mm magnet with 5,500N holding power • Includes 2x 4.0Ah batteries fast charger & carry bag • 7kg unit weight. CLA-2720

Plate & Pipe Bevelling Machine • Newly designed milling head arrangement which is fast and easy to set up • Single milling head with 10 square inserts • 15 to 60° working range • 1600W induction motor • 3340rpm • 21mm maximum bevel width • 20.5kg.

WA-BM20+

499

$

8” Belt & Disc Grinding Machine

Heavy Duty Industrial Roller Stand - Flat Head

139

$

• 1HP industrial grinder with 915 x 50 belt & disc grinder • Worklight • Wheel dresser • Coolant tray • Cast tool rests • Emergency stop switch and wide guard.

BG8/915

2899

• 1HP (750W) motor • Mushroom safety cutout switch & wide guards for large wire wheels • Wheel dresser • Adjustable, magnifying eyeshields • Worklight • Coolant tray • Cast metal tool rests • Emergency stop switch. BG8

• Height adjustable 580 - 970mm • Maximum weight 800kgs • Suitable for bandsaws, square tube etc. RS-FLAT

BONUS 150mm Drill Press Vise

$ 200mm (8") Heavy Duty Bench Grinder

workshop gear

3099

®

20L Wet/Dry Vacuum Cleaner

TD1316F

249

$

569

$

Pedestal Drill Press • 550W • Drilling capacity 16mm • #2MT • 16 speed 180-2770RPM • Safety guard • Drill chuck & arbor. TD1316F

4599

$

139

BONUS Stand

$

MC-STAND315

249

$

300mm Portable Ventilator & 5m Ducting 24

• Produces 1083L/sec airflow • 5m ducting that concertinas for easy storage • Exhausts and extracts air. MPVIFD300

We pride ourselves on excellent customer service

350mm Coldsaw • Italian made • Swivel head 45° right and left • 415V 3 phase motor • Trigger switch operation • Pneumatic vise • Recirculating coolant system • Includes blade • 2 Speed gearbox 20/40rpm • 210kg • Cutting capacity -90° round: 110mm, -45° round: 80mm.

MC-NEW350-3 nd us on Fi

fa

cebook

1399

$ Industrial Bandsaw

• Horizontal & vertical cutting bandsaw • Hydraulic down feed • 1HP, 240V • 4 speed • Safety stop switch • Cutting capacity 90°: 180mm, - 45°: 110mm. UE712A

Heavy Duty Industrial Roller Stands

1249

$ 2020P Pedestal Drill

• 1.5HP motor • 12 speed • 20mm chuck size • 3480RPM maximum speed • #3 morse taper • 508mm swing • 3yr warranty. 00295

INDUSTRY TOUGH TOOLS FOR ALL

• Vee head stand height adjustable 580-970mm • 800kg max load capacity • Suitable for threading machines, pipe, rod etc. RS-V

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

25

79

• Fully lockable • 2mm EVA foam drawer liners • Heavy duty ball bearing drawer slides • Dimensions: 680w x 460d x 945h. T840104

• 870 x 890 x 490mm • Heavy duty full extension ball bearing slide drawers • Heavy duty castors • Some assembly required SP40107

26" Pro Toolbox

• Removable inner tray • Metal latches • Tools sold separately SCMT50504

499

$

Domestic Cold Water Pressure Cleaner • 10A • 2030psi • 6.8L/min • Includes spray gun & lance, vario nozzle, turbo nozzle, & foaming bottle • Made in Italy.

KL1400 EXTRA Also Available: 102 KL1600A Extra 2175 psi 8L/min 240V 10A unit with brass head pump $549

1600psi 10A Industrial Electric Pressure Cleaner

• 10A • 2800RPM motor • 2175psi 9L/min • Accessories include turbo & vario lances, low pressure chemical pick up with removable detergent bottle, • 12m hose with on board hose reel • Ideal for workshops • Made In Italy by Comet.

102 KT1800 EXTRA

• 9L/min • Slow speed 1400RPM pump • Industrial pressure cleaner with hose reel & 15m of wire braided hose • Comet plunger pump with brass head, turbo/ vario nozzles & on-board detergent tank.

102 K250 9/120E

pressure cleaners

Storage

7 Drawer Roller Cabinet

$

2 Drawer Black Service Trolley

449

$

375

$

Semi-Professional Cold Water Pressure Cleaner

1699

$

949

$

Heavy Duty Adjustable Shelving

Foldable 2 Door Metal Storage Cupboard • 5 minute assembly • 1830H x 900W x 450D • Grey Ripple powdercoat • 4 adjustable shelves • 3 point locking system.

F2DSC4

➧

• 1850H x 1500W x 500D • 4 adjustable shelves with steel shelf inserts • 300kg load capacity UDL SGD1-P

➧

Watch the unique foldable assembly video here

Watch the unique

foldable assembly video here

329

$

279

$

EACH

Semi-Professional Electric Hot Water Pressure Cleaner

Industrial Electric Hot Water Pressure Cleaner

• 2175psi • 9L/min • 15A • 2800RPM • Comet axial pump, with brass head • Total stop safety function • Adjustable water temperatures up to 90°C • Inbuilt detergent & diesel tanks • Compact frame with large rubber lined wheels • Includes gun lance & 10m hose • Made in Italy.

107 SCOUT 150 CLASSIC Also Available: 107 SCOUT 150 Extra with 10m hose $2599

• 2.2kW 15A • 2030psi • 10L/min Industrial • Comet ZW-K plunger pump with brass head • 1440RPM electric motor • Low pressure detergent with 13L inbuilt tank • Supplied ready to work, with gun, lance & 10m hose • 120kg • Made in Italy.

107 KM3.10 CLASSIC

2290

$

4890

$

2700psi 6.0HP Pressure Cleaner

ladders

3ft (0.9m) Double Sided Fibreglass Step Ladder

• 150kg industrial load rating• Non-slip treads and topcap • Patented resin bracing system • Stabiliser ready • Non-marking rubber feet. DM006-I

319

$

11L/min • Honda® GX200 Engine • Comet Italian plunger pump • Heavy duty gun & lance • 7.5m hose • 4 quick connect nozzles • 3 yr engine & 2 yr pump warranty. 120 BAR2565-H

•120kg Industrial load rating • Cross-braced spreader • Lightweight at 6kg • Non-slip treads • Alum top cap.

FSM003-C

6-11ft (1.8-3.3m) Aluminium Dual Purpose Ladder

1690

$

108

$

26

• Punchlock® ‘D’ shaped rungs for secure footing • Industrial duty rated • 150kg load rating • Interlocking stiles and swaged rung to stile joint for maximum resistance to twist and side sway. FS13623 Also Available: FS13625 3.6m/6.4m $398

1539

$

179

Heavy Duty Wash Down Gun

• Punchlock® tread design and deep fascia top caps increase torsional rigidity of the overall ladder frame • Industrial duty rated • Designed for use on industrial work sites • 150kg load rating • Light, strong, aluminium construction • Double sided for greater versatility and greater load bearing strength. FS13386 Also Available: Part No Height Price FS13388 1.8m (6') $249 FS13389 2.4m (8') $329

The right price & practical advice

• 60L/min @ 350psi • Up to 90°C working temperature • Ideal for high volume wash down & heavy duty home use.

125 85.205.020

$

69

3800psi Petrol Pressure Cleaner

4000psi Industrial Petrol Pressure Cleaner

• 9HP GX Honda® engine • 3800psi • 13L/min • Semi-professional unit with AR pump • Large 11" wheels • Includes gun/lance, 4 quick connect nozzles & 10m wire braided hose.

120 BAR3890-H

• 13HP genuine Honda® GX390 powered engine • 4000psi 15L/min • Italian made comet plunger pump • Low pressure detergent injection, gun/lance with 4 quick connect nozzles • 15m of wire braided hose • Ergonomic 2 wheel scoop frame • 10" pneumatic tyres.

BAR4013-H

Platform Access 3 • Suited to ‘high frequency’ use • Walk-thru design for stock picking and access to mezzanine floors • Work from 3 sides • Large 125mm wheels – improved portability and ‘easy glide’ action • Large safe, stable work platform 590 x 800mm • 170kg rated • Platform height 828mm. FS13591

Gun & Lance Kit Also Available: Part No Height FS13592 1.104m FS13593 1.381m FS13594 1.656m

Price $1790 $1890 $1940

nd us on Fi

fa

cebook

1099

$

• 8.3L/min • PowerEase 5HP petrol engine • Annovi Reverberi axial pump • 7.5m hose • 4 quick connect nozzles.

120 BEVR2455-R

180 $

• 9.5L/min • Honda® GC190 engine • Comet Italian plunger pump • Heavy duty gun & lance • 7.5m hose • 4 quick connect nozzles • 3 yr engine & 2 yr pump warranty.

120 BAR2760D-H

2400psi Petrol Cold Water Pressure Cleaner

$

1.2m (4ft) Aluminium Double Sided Step Ladder 3.0m/5.2m Extension Ladder

499

$

2700psi Industrial Petrol Pressure Cleaner

89

$

1995

$

• Includes 4000psi 15L/min gun, 900mm lance, QC coupler & 3/8NPT female inlet.

125 85.205.026

INDUSTRY TOUGH TOOLS FOR ALL

BONUS 1L Chemical Sprayer

2599

$

27 Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

CRACKIN' DEALS

$

69

BONUS 20m Blue Air Hose 00348

Metric/AF Ball End Hex Key Set

13pce Hole Dozer Hole Saw Set • Size ranges from 19 up to 64mm • Includes 2 arbors, 2 pilot drills and carry case. 49224025

• Ball tip allows a 25° angle insertion • Made from high torque protanium steel • ProGuard finish 5 times more protection against rust • Life time warranty. 20199

179

$

ED L I M I TC K STO

P13 Belt Drive Air Compressor • 10A • FAD 240L/min @ 100psi • Ideal for screw drivers, ½” ratchet wrenches & ½” impact guns • 5yr pump & 1yr motor warranty. 00092

319

$ 26pce 1/2”Dr Metric/AF Socket Set

Hydraulic Puller Kit • Includes ram, bearing separator, twin & triple head beam configuration, 100, 150 & 200mm legs • Drop forged, heat treated high quality steel • 180mm spread, 425mm reach.

265000BP

• 10 metric sockets ranging from 10 to 19mm • 10 AF sockets ranging from 7/16 to 1” • Includes ratchet handle & assorted accessories.

SP20306

99

899

$

$ Air Die Grinder Set • Includes bonus double cut 1/2" burr: radius end • Collet sizes 1/4 & 1/8", 3 & 6mm. B9020001

BONUS Bearing Puller Kit

99

$

224000

®

BONUS 14, 18, 22mm Cutters Plus Pin

ED L I M I TC K STO

ASSET-Z

99

$ Electronic Helmets

999

$

EACH

• Adjustable delay time - delays the change from dark to light states by up to one second • Adjustable shade settings - from shade 9 to 13 • Solar powered - no more replacing flat batteries.

Part No Description 94006943 Powercraft Black helmet 94006944 Titan helmet

Pro 35 Magnetic Base Drilling Machine • 920W • Quality, compact & robust European made machine • Lightweight, only 10kg • Ideal for onsite & overhead tasks • 35mm dia. & 52mm depth capacity • Magnetically attached through cutter coolant system. HMPRO35

99

$

BONUS Multi-Tool 19pce Drill Set

• 1.0 to 10.0mm • Includes bonus Gerber Evo multi-tool. D101BSM2

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

www.aisnational.com.au

îs. 30193

www.aisnational.com.au