
6 minute read
Grain Store Ventilation Equipment

Polycool Pedestal

Polycool is a plastic vertically standing, crop cooling and conditioning system, evolved from 40 years of research and development. It is used to control the heat of floor stored crops, using a fan positioned at the top of the pedestal. Polycool is a cost effective and flexible solution that ensures crops stay free from moulds and insects. Plastic pedestals are very much more robust than metal pedestals, withstanding years of rugged loader handling, whilst delivering the same cooling rates.
A 450mm slotted base section, allows air movement, reducing down to either a 200mm or a 150mm extension pipe, which is not slotted. Once grain is covering the ‘pedestal’, a fan is placed on top and used to either suck or blow heat from the crop as required. Constructed from robust food-grade twin wall plastic, the Polycool pedestals have been tested and approved by ADAS, and have a 50% more open area than other products available allowing fans to work to their full potential.

Polycool Maxi Pedestal
With a height of 5.3m, the Maxi is designed for crop storage depths of 5.2m to 9m coupled with HFM225 fans. Kit includes 2m x 450mm perforated base unit with 450mm200mm reducing cone and 3m x 200mm steel extension pipe. Recommended to be used with the HA501292 fan.
Polycool Standard Pedestal
With a height of 3.5m with extentions up to 5.5m available. Kit includes 1.2m x 450mm perforated base unit with 450mm –150mm reducing cone and 2m x 150mm extension pipe. Suitable for the storage of crops between 3m-5.5m. Recommended to be used with either HA501289 fan, HA501290 fan or HA501291 Evo fan.


Polycool Mini Pedestal
With a 2.9m total height, kit includes 0.6m x 450mm perforated base unit with 150mm450mm reducing cone and 2m x 150mm extension pipe. Recomended to be used with the HA501289 or HA501290 fans.
Portek Laserstrike Birdscarer
• The LaserStrike uses optical quality precision lenses and components and has been specifically developed for use as a safe, effective and silent, birdscaring tool which is ideal for agricultural use where loud noises are a problem.


• The Portek Laserstrike is used to scare and clear birds at close range and up to 600 metres away. Most effective in low light conditions. Can clear large areas in minutes and repeated
Polycool Reducing Cone

For use with HA501264, HA501265.
Polycool End Cap
• For use with HA501264, HA501265.
PA302394
Polycool Extension Pipe


Polycool Oilseed Rape Filter

Polycool Metal Coupler



Metalcool Pedestal
Metalcool is a galvanised steel vertically standing crop cooling system. "Added strength by design", the Metalcool pedestals use louvred steel not punched, so no metal is removed leaving the section as strong as possible. The louvre has been designed to allow the optimum air movement whilst allowing use with OSR and other small grains.
2 sizes available:
Standard Metalcool Pedestal
3.5m total height which can be extended, louvered not punched for increased strength, 400mm square base, with 1.2m of 250mm section, reducing cone, and 2m of 150mm section. Suitable for OSR and cereal crops.
Recommended to be used with fans HA501289, HA501290, HA501292.
Maxi Metalcool Pedestal
5.3m total height which can be extended, louvered not punched for increased strength , 400mm square base, with 1.2m of 300mm section, reducing cone, and 2m of 200mm section. Suitable for OSR and cereal crops.
Recommended to be used with fans HA501291, HA501292.
Metalcool Extension Pipe
Scan here for Installation overview

Storecool Pedestal
Innovative grain cooling units with wide open base for optimum air flow, especially suitable for shallow grain storage. The extension pipe has a solid wall for added strength. Suitable for most crops, with no need for the small seed filter for Oil Seed Rape.

Storecool – Pedestal ventilation gets cooler

Airflow 40% greater than traditional systems. Unique design smooths airflow to fan. Efficient crop store cooling.

Hot Spot Spears
Constructed from tough, spiral wound, galvanised steel tubing, supplied with an easy to use anti-slip winding handle.

Our screw in Hot Spot grain cooling spear comes with an easy to use ‘Anti-Slip’ winding handle, making the spear quicker and even easier to use. The newly designed handle slides through a reinforced top section to ensure absolutely no slippage whilst the spear is being screwed into crops. One handle can be used for multiple spears
Available for both cereals and oil seed rape
2.35m perforated steel spiral wound spear

For rapid response to storage hotspots

Recommended to be used with the HA501288 VBL6 fan
Extension Leads for grain store fan range

Extension leads for the grain store fan range
• Single phase 3-core
• 3 phase 4-core with no RCD
• Single phase with RCD protection.
Please note: All extension leads listed as not having RCD protection, must have it in the mains supply. Customers need to take advice from a qualified electrician to ensure adequate motor protection has been installed.
“As
RECOMMENDED VLB6 FANHA501288 SEE PAGE 213 business with almost farming agricultural trading, we understand how important the grain in your sheds is to you. With this in mind we have partnered with Evans
VBL6 Fan
• Coolspear PV50 Fan
0.25Kw top performing fan, exhausting action only.
• With the tapered 100mm-150mm spigot for use with the Mini-Pedestal or the Hot Spot Spears.
• Supplied wired with 3pin 13A plug and 2.5m of cable. For use with HA501294 & HA501295
Our grain store fan selection has options available to suit every ventilation setup in a grain store. Many of grain cooling fans in our range are tried and tested over 40 years; and includes a number of grain store champions!
All our grain cooling fans are proudly manufactured in England, supporting British Manufacturing.


HA501289, HA501290 & HA501292:
Fans for use with grain cooling Pedestals and Underflow. Class leading output and superb longevity.

HA501288:
Small fan used with Grain Hot Spot Spears, smaller grain bins and silos. Class leading output and superb longevity.
VBW8-1/3PH Fan
• PV250 Fan
HA501291: Energy efficient fan for grain cooling Pedestals and Underflow. Only fan of its kind. Integrated control and unrivalled energy efficiency.

EV:
Lateral ducts and drying floors. Fan with great back pressure characteristics, high airflow and high build quality. Individually configured for your store.
Hydor: Grain store and large building air extraction fan. Shutters and side guards as standard. Galvanised steel construction. Superb airflow characteristics.
1.1Kw top performing fan with all aluminium construction.
• High performance impeller for improved suck or blow air movement
• Integrally fitted guards
• 150mm round inlet and outlet spigots. Wired with 16amp plug and 2.5m cable
• Complete with thermal cut out switch as standard Single phase or three phase options available.
Evofan Fan
• PV250 Performance Fan - EVOFAN150

• 0.35Kw single phase fan with in-built differential temperature controller to automate fan running times.
• Uses brush-less motor technology and redesigned impeller, giving the same performance but a large energy saving. Can be used with any Polycool pedestal

Lateral Ventiliation Fans
High Quality and UK built the Lateral Ventilation Fans from Evans & Pearce are the ideal partner for floor channels, floor ducts and Polycool lateral ventilation ducts. Suited to high or low volume ventilation and available in sizes 0.75kW to 75kW. Each fan unit is built to order and can be configured to individual requirements.

• EV fans are available in sizes 0.75kw-75kw
• Perfect for blowing air through under floor channels and also on floor ducts for cooling and conditioning crops

• Ideally suited to high or low volume crop ventilation
• High quality and UK built
• Competitively priced
• Built to order
• This is the top of the range fan formally the VBW9 PV400
• Exhausting Fan only
• 2.2KW
3 phase With 200mm inlet spigot and all steel construction
• For pedestal grain depths of 6-8m or where high volumes of air at a shallow depth is required. Starter overload protection device sold separately.
Polycool Laterals Ventalation Pipe, Connectors & End Caps
Our range of Polycool Laterals are plastic, twin wall ducts which are very strong and robust. They are a hard wearing, heavy duty alternative to traditional metal systems. Our range of Polycool 6m x 450mm grain ducts feature a massive perforated area and are more than capable of providing the air flow required to cool crops.


• Plastic, twin wall ducts - very robust and durable
• Size: 6m x 450mm
• Feature a massive perforated area • Horizontal ducts • Can be added to an existing duct run or Fan
Due to huge volatility in raw material prices and availability, printed prices are correct at the time of print (June 2023) but are subject to change without prior notice.
•