Issuu

AEROSPACE & SHEETMETAL ASSEMBLY TOOLING SPECIALISTS

速

MONOGRAM AEROSPACE FASTENERS

Tooling Index Drills Pnuematic

A Abrasives Abrasive Blasting Equipment

79,80 126

Abrasive Power Tools,Dynabrade Air Hammers Air Hammer Accessories

10,11,26 12-24

Air Line Accessories Alligator Riveters Angle Drills

133 1 51-55

Angle Drill Attachments

49-50

Bits -Screwdriver Bits Blind Riveters BoeLube Brakes, Sheetmetal Breakloose Tool Brushes, Pilot Bucking Bars

90-92 66 107 70,71,73 66 27-33 136 127 18 57 25,26

C Cable Swager Cable Tensiometer Camloc Plier Carbide Countersinks Carbide Rotary Files Cherry Rivet tooling Chisels Chucks, Drill Clamps Clecos Coil Hoses Collar Cutters Collar Tools (Hi Lok Type) Collets, Drill Composite Cutting Tools Compression Riveters Counterbores

Drills Angle Pnuematic

51-55

E Engraving Pens

125,129

Everede Eversinks Extractors

101 59

F File Pnuematic Files Hand

71,125 132

Flaring Tool

107

Back Countersinks,Spotfacers Balancers Beading Tool Belt Sanders

45-47

115,116 124 107 89,94,95,101 81 27-32 12,18,131 45,53 60-62 60,61 133 93 118-124 53 99-101 1-2,4-6 90,91,95

Rivet Sets Rivet Shavers Rivet Squeezers Pnuematic

Roller Ratchets Rotary Files (Carbide) Routers Air

123 81 82,83

Router Bits

72-77

H 104,107,108 125

Sand Blasters Sanders Saws Air Scaler Chipper Air

112-114

Scaler Needle Air

129

Screwdriver bits and accessories

Hole Cutters Hole Finders Blind

104 104

Screwdrivers Screw Extractors

Hole Saws Hole Spotters

98 104

Sealant Guns Pnuematic Shears Pnuematic

102-103 127-128

Sheetmetal Clamps (Clecos) Sheetmetal Machinery

60-61 127-128

Hose (Air Hoses) Huck Riveters

133 35-42

I Impact Wrenches

Jo Bolt Tooling

117

K Knock out Punches

128 135

Snips (Aviation L and R ) Spray Gun Squeezers Rivet

107 125 1-6

Step Drills

L "Lightning" Hole Punches Lockbolt Tooling

130 32,36-42

Strap Duplicators (Hole Finders) Swaging Machines

Tapping Tools (Air)

127

Tensiometers

124

Nibbler Hand

107

Testing Equipment

124

Nutplate Spacematic Tooling

106

Toggle Clamps

Nutrunners O Oil (Airtool)

63-66

Torque Wrenches Transfer Punches Tube Blender

133

105 126

Pop Riveters 43 Protractors Propeller 124 Punches 13,17,24,129,130,131 R Reamers Regulators Rivet Cutters

Drill Nut Plate Jigs

Rivet Fan Spacing Tool

Ph +61 498 610 566

104 115,116

Nibbler Air

Drill Bits 53,56,57,99 Drill Bushing Assembly (Egg Cup) 48 57

Needle Scaler

Plate Nut Drill Jigs (Hand) Polisher (Aircraft)

Drill Stops

63-66 59

Shrinkers Stretchers Snap Socs

Cut Off Wheels Cutting Tools

105

84-87,129 129

118-124

136

9 49-50

126 69-74,78

Hi Lok Type Collar Tools

P Paint Cutters

Dimple Sets Drill Attachments

Helicoil Tools

Countersink Cutters 88,89,95,96,97 Countersink Microstops 88

109-111 100-101

1,2,4,5,6 3 4,5,6

133 U

D Deburring Tools Diamond Tooling

13-24 34,72

Rivet Squeezers Hand Riveters (Deep Throat)

Oilers

78 88-101

Grinders Hand Tools Heat Gun

Rivet Nut Tools

Rivet Hammers

13 10-11,26

67 17 108

Unibits (Step drills) V Vacuums (Compressed Air) Vises

56 133-134 62

Vise Grips Visulok Tooling W

Wheels (Cut Off) 59 Wire Twister (Milbar Safety) 12,133 104

107 117 78 108

Y Yolks for Rivet Squeezers

Z Zephyr Countersinks and Cutters colin@appliedfastenersandtooling.com

T EXPER S IR A P E R

REBUIL T AVAILA S BLE

ALLIGATOR YOKE-COMPRESSION RIVETERS

CAPACITY COLD RIVET

MOVING JAW

STANDARD JAW

Alum. (inch)

Steel (inch)

Reach (inch)

Gap (inch)

CLOSED HEIGHT (inch)

1/8 1/8 3/32

3/32 3/32 1/16

1-1/2 2-1/4 3

1-5/8 1-7/8 2

7/8 7/8 7/8

MAX TRAVEL (inch)

MAX FORCE WITH 90 PRESSURE (lbs)

PART OF STROKE AT MAX FORCE (final inch)

NET WEIGHT WITH JAWS (lbs)

5/8 7/8 1-1/4

3000 2200 1800

1/16 1/16 1/16

3-3/4 4-1/4 4-1/2

MODEL 3000A (Equivalent to the CP 0214-ANBEL, ANFEL, ANGEL) (APT / 710A) 3/16 5/32 1/8

5/32 1/8 3/32

1-1/2 2-1/4 3

1-5/8 2-1/8 2-1/8

7/8 7/8 7/8

5/8 7/8 1-1/4

6000 4300 3400

1/16 3/32 1/8

5-1/2 6 6-1/4

MODEL 6000A (Equivalent to the CP 0214-ENBEL, ENFEL, ENGEL) (APT 725 A)

3/16 5/32 1/8 1/8

5/32 1/8 3/32 3/32

2-7/8 5 7 9-1/8*

1-5/8 1-5/8 2-1/8 2-1/8

7/8 7/8 1-1/2 3/4

5/8 1-3/8 1-11/16 1-11/16

5200 3400 3000 3000

1/8 3/16 3/16 1/16

15-3/4 19-3/4 24-1/2 26-1/4

10,400 6800 6000 6000

1/8 3/16 3/16 1/16

18-1/2 22-1/2 27 29

MODEL 151A (Equivalent to the CP 0351 - ASGEL, ASKEL, ASREL, ASVEL -APT 740A)

1/4 3/16 3/16 3/16

3/16 5/32 5/32 5/32

2-7/8 5 7 9-1/8

1-5/8 1-5/8 2-1/8 2-1/8

7/8 7/8 1-1/2 3/4

5/8 1-3/8 1-11/16 1-11/16

TANDEM VERSION MODEL 151 TA (Equivalent to CP 0351 – ESGEL, ESKEL, ESREL, ESVEL, APT 750A)

AIR OPERATED FLOOR STAND #351 AFS FITS ALL ALLIGATOR TYPE RIVETERS “EXCLUSIVE ADVANCED AIR TOOL DESIGN” *PICTURED WITH OUR CUSTOM MFG. AIR OPERATED FLOOR STAND No. 351 AFS..... FLOOR STAND ONLY No. 351 FS AIR OPERATED CONTROL ONLY NO. 351 AFB.....

Enables mounting Riveter to any surface

BENCH STAND

OTH E TY R STA PE AVA NDS ILA BLE

(Specify) For: CP351A, 151A, 151TA SERIES No. 351-BS SEE PAGES 7,8, 9 FOR .187 SHANK SQUEEZER SETS

COMPRESSION RIVETERS – “C” YOKE Expert Repairs on All Brands

CAPACITY COLD RIVET

Rebuilts Available - Inquire

STANDARD "C" YOKE

Alum. (inch)

Steel (inch)

Reach (inch)

Gap (inch)

1/8

3/32

1-1/2

1-1/4

SET HOLDER PLUNGER MAX. TRAVEL (inch)

PART OF STROKE AT MAX FORCE (final) (inch)

NET WEIGHT WITH YOKE (lbs.)

11/16

9/16

1/16

4-1/2

11/16

9/16

1/16

5-1/2

25/32

9/16

1/8

12-1/2

25/32

9/16

1/8

CLOSED HEIGHT (inch)

MODEL 3000C (Equivalent to CP 0214-CELEL) (APT 705C) 3/16

5/32

1-1/2

1-1/4

MODEL 6000C (Equivalent to CP 0214-FALEL) (APT 720C) 3/16

5/32

2-1/8

1-3/16

MODEL 151C (Equivalent to CP 0351-CUDEL APT 740C) 1/4

7/32

2-1/8

1-3/16

MODEL 151T C (Equivalent to CP 0351-FUDELAPT 74OC-268) #268 TANDEM CONVERSION ASS'Y ONLY (Reference A) 1/4

7/32

2-1/8

2-1/4

1-1/32

7/8

1/32

MODEL 155 (Equivalent to CP 0355-CEBEL) SUPER PORTABLE PUNCH

• Quicker And Cheaper Than Drilling • Makes Clean, Accurate Holes Without Burrs • 5400 lbs. Punching Force Max.

No.151PU..............................

SPECIAL "C" YOKES AVAILABLE - SEE PAGE 3. PAGES 7,8,9 FOR .187 SHANK SQUEEZER SETS. 2

• • • •

3/16" Max. Material Thickness 5/16" Max. Hole Diameter 17⁄8" Reach • 211⁄2" Length 1/2" Gap. • 201⁄2" lbs.

HAND RIVET SQUEEZERS ALL MODELS DESIGNED TO SQUEEZE 1/16” THROUGH 3/16” ALUMINUM RIVETS, COMPLETE WITH ADJUSTABLE RIVET SET HOLDER WHICH ALLOWS ADJUSTMENT FOR VARIOUS RIVET LENGTHS. HARDENED STAINLESS STEEL “C” YOKE AND FRAME. SEE PAGES 7, 8, AND 9 FOR .187 SHANK TOOLING.

REMOVABLE YOKE TYPE

100% Stainless Steel THS 15 . . . . . .1-1/2” THS 20 . . . . . .2” THS 22 . . . . . .2” THS 30 . . . . . .3” THS 40 . . . . . .4” THS 60 . . . . . .6” THS 30-4 . . . .

Reach x 1-1/4” Gap Reach x 1-1/4” Gap Reach x 2” Gap Reach x 1-1/4” Gap Reach x 1-1/4” Gap Reach x 1-1/4” Gap With 2” and 3” Yoke

HEAVY DUTY, 360” Swivel Yoke Develops 3,500 lbs. of pressure * DA 2 . . . . . . . .2-1/2” Reach x 1-5/8” Gap * DA 5 . . . . . . . .6” Reach x 1-5/8” Gap Overall Length 18-1/2” Weight 9 lbs.

HAND RIVET SQUEEZER AT501A

Replacement Yoke Only THY 15 . . . . . . . . . . THY 20 . . . . . . . . . . THY 22 . . . . . . . . . . THY 30 . . . . . . . . . . THY 40 . . . . . . . . . . THY 60 . . . . . . . . . .

*NOTE: Requires 1 set threaded adapters to use std. 3/16” shank tooling #3824...........per set

Manufactured with jaws of heat treated tool steel. The deep throat with 18” handles provides ample leverage for ease of operation. 2-1/2” Yoke reach uses .187 shank sets.

“C” YOKES FOR SQUEEZERS “C” YOKES TO FIT #US114 & #CP214 CENEL (#3000C, 6000C) APT 705, 720 HEAVY DUTY MODELS 3/4” THICK 6000C, APT 720C, ETC. ADJUSTABLE DOLLIE YOKES TO FIT US114, CP214 3000C, 6000C, APT705, 720 COMPLETE WITH DOLLIE & LOCK NUT 3/4” THICK “DEEP THROAT MODEL” 3/4” THICK 6000C,APT720C, 114TC “C” YOKES TO FIT #US151 & #CP0351 CUDEL COMPRESSION RIVETERS SPECIFY #1 or #2A YOKE FRAME

1-1/2” Reach x 1-1/4” 1-1/2” Reach x 2-1/2” 1-1/2” Reach x 3” 2” Reach x 1-1/2” 2-1/2” Reach x 1-3/8” 3” Reach x 1-1/2”

Gap Gap Gap Gap Gap Gap

. . . . . . . . . . . . . . .60,000 . . . . . . . . . . . . . . .60,012 . . . . . . . . . . . . . . .60,013 . . . . . . . . . . . . . . .60,001 . . . . . . . . . . . . . . .60,002 . . . . . . . . . . . . . . .60,014

2” Reach x 2” Gap 2-1/2” Reach x 2” Gap 3” Reach x 1-1/2” Gap 3-1/2” Reach x 1-1/2” Gap 3/4” Thick

. . . . . . . . . . . . . . . 60,003 . . . . . . . . . . . . . . . 60,006 . . . . . . . . . . . . . . .60,004 . . . . . . . . . . . . . . .60,005

2” Reach x 2” 1-1/2” Reach x 1-1/4” 1-1/2” Reach x 3” 4” Reach x 2”

. . . . . . . . . . . . .60,003 . . . . . . . . . . . .60,010 . . . . . . . . . . . .60,011 . . . . . . . . . . . .60,009

Gap Gap Gap Gap

TD TD TD TD

4” Reach x 1-3/4” Gap . . . . . . . . . . . . . . .60,007 5-1/2” Reach x 1-3/4” Gap . . . . . . . . . . . . . . .60,008

2-1/8” Reach x 1-3/16” 2-1/8” Reach x 1-1/4” 3-3/4” Reach x 1-1/4” 3-5/16” Reach x 3” 5” Reach x 2-1/2”

Gap Gap Gap Gap Gap

. . . . . . . . . . . . . . .90.013 . . . . . . . . . . . . . . .90,014 . . . . . . . . . . . . . . .90,015 . . . . . . . . . . . . . . .90,016 . . . . . . . . . . . . . . . .90,017

YOKES MANUFACTURED TO MEET YOUR SPECIAL REQUIREMENTS

BENCH MODEL RIVETERS

SIOUX HIGH POWER RIVET SQUEEZERS The new SIOUX™ Triple Cylinder offers up to 9000 lbs. of compression force. Will easily squeeze up to 1/4” diameter aluminum rivets. 18-3/4” long, weighs only 8-1/2 lbs. Accepts industry standard 3/16” rivet squeezer sets. Unit can be fitted with longer reach jaws. Jaw has 1-1/2” reach with a 1-1/4” gap. MODEL SZEA8015 4

R BLE FO A T I U *S AFT AIRCR ETS RIV BRAKE

*REACH 9-1/2 IN. Gap 3-1/2 IN.

DEEP THROAT RIVETERS

*12-1/2 IN. REACH Gap 3-1/2 IN. AVAILABLE

OPTIONAL EQUIPMENT FOR PRESS IN HARDWARE FOR 6000 CSA AND 8000 CSA “SET A” INCLUDES 15 PIECES FOR GETTING IN CLOSE: • 2— 4 — 6 — 8 — 10 in. studs • (4-40 6-32) — (6-32 8-32) — (10-32) standoff • (2-4) — 6-8-) — 10 threaded inserts • (4-40) — (6-32 8-32) — (10-32) floating nuts

COMPRESSION UNIT DEVELOPS 0-8800 LBS MAXIMUM COMPRESSION FORCE WITH LINE PRESSURE OF 90-100 PSI

For 1/2 in. in length or less

“SET B” INCLUDES 15 PIECES • stud button holder • 2— 4 — 6 — 8 — 10 — 1/4 long stud buttons • (2-4) — 6-8-) — 10 long standoff buttons • (2-4) — 6-8-) — 10 threaded inserts • (2-4) — 6-8-) — 10 floating nuts

FLANGER

For 1/2 in. and up to 1-1/2 in. in length

ADJUSTABLE MANDREL FOR 3/16IN SHANK STANDARD AIRCRAFT SQUEEZER SET STANDARD TOOLING BAR

3/16 IN. SHANK SQUEEZER SET FOOT CONTROL (FC-2) SPECIAL TOOLING BAR

* ALSO AVAILABLE AS FLOOR MODELS

Shown with Standard 3” Reach Yoke, x 1-3/4” Gap.

S UILT REB LABLE I AVA

DEEP THROAT RIVETERS AND DIMPLERS

This Air Operated Pedestal Compression Riveter will easily compress 3/8” dia. Steel rivets, developing in excess of 16,000 max, force @90 P.S.I. The valving in our unit allows for greater control than comparable riveters of other manufacturers. It comes complete with stand and air operated foot control. This Rivet Machine has been designed with the cooperation and assistance of the Goodyear Corp., and is recommended for repair of Goodyear brakes on many aircraft.

Rivet Capacity Steel (DIAM.) 3/8”

Yoke Sizes Reach Gap 8” 12” 24” 36”

3-1/4” 3-1/4” 5” 8-1/2”

Max. Force LBS. @ 90 P.S.I.

Weight 190 230 475 2000

16,000

ALSO AVAILABLE: FLOOR MODEL 15KCSA-24”

lbs. lbs. lbs. lbs.

Height

Model 150

48” 52” 57” 65”

150-8” Reach 150-12” Reach 150-24” Reach 150-36” Reach

(F.O.B. FACTORY)

GOODYEAR/LORAL AEROSPACE CORPORATION BRAKE RIVETING TOOLS We have a complete selection of tooling for the installation of Goodyear/Loral™ aircraft brakes. Most of the listed tools are designed with .312 shank diameter to fit the Model 150 Riveter or the Chicago Pneumatic 450 Riveter. These tools are manufactured in strict accordance with Goodyear/Loral™ standards. 114-139-1 114-151-1 5T1-25092 5T1-25286 5T1-25287

5T1-25309 5T1-25310 5T1-25311 5T1-25355 5T1-25453

5T1-25455 5T1-25460 5T1-25465-1 5T1-25465-2 5T1-25470

5T1-25775 5T1-25807 5T1-25855 5T1-26037 5T1-26123

5T1-26150 5T1-26206 5T1-26245 5T1-70948 5T1-71785

5T2-10066 5T2-10067 5T2-10068 5T2-10073 5T2-10080

5T2-10157 5T2-10431 5T2-5994 5T1-1/4 Deriveting Punch 5T1 Deriveting Anvil

PNEUMATIC SQUEEZERS DS-C28-20

“C” Yoke Type These lightweight, sturdy, compact and fast pneumatic squeezers have an aluminum rivet capacity of 1/8” (3.18mm) for DS-C28-20 and 3/16” (4.8mm) for DS-C44-24 when operating at 90psi. air pressure. Rivet set holder adjustment – .2”(5mm) for use with different thicknesses without rivet set change.

DS-C44-20

Safety throttle lever with feathered movement for fast or slow approach.

Model Number

DS-C28-20 DS-C44-20

Pounds Max. Force @ 90 PSI (6.2 bar) 3000 4850

Max. Travel in. mm 1.38 35 1.34 34

Jaw Specifications Snap Holder Adjustment Reach in. mm in. mm .12 .12

3 3

1.97 50 1.97 50

Gap in. mm 1.41 1.38

36 35

Overall Length in. mm 10.78 274 13.4 340

Weight lb kg 4.8 6.7

2.16 3.04

CUPPED SQUEEZER SETS

*Quantity

NOTE: * QUANTITY PRICE BREAKS AS SHOWN ABOVE 7

FLUSH SQUEEZER SETS

PRICE PRICE PRICE 1-24 25-99 100-up

4502 4503 4504 4505 4506 4508 *45010 8

26 Pcs. of the most popular sets all in 1 box. (AN 470, Flush, AN 450, AN 430, 1/16-3/16 dia. plus shims). .187 shank. #26 RSK 24 Pcs. of soft and hardened flush sets all in 1 box. Plus shims. #24 RSK

DIMPLE TOOLS FOR AN–426 RIVETS & AN–509 Screws

AN509 SCREW

Specify Part No. followed by Symbols for Shank and Body Length Desired. TO ORDER: EXAMPLE: To Order 3/32 AN-426, .187 Shank, 3/8 length, Punch STM 4263 A–2 SPECIFY: TO ORDER IN PAIRS, SPECIFY AS FOLLOWS– EXAMPLE: STMF 4263 A-2. (INCLUDES MALE & FEMALE 3/32” DIMPLE DIES, 3/8” L.)

SWIVEL DIMPLING TOOLS MS-20426 (AN-426)

AIRCRAFT RIVETING HAMMERS WITH TRIGGER CONTROL SHANK SIZE

RIVET ALUM.

CAPACITY STEEL

STROKE

LGTH

WGT (lbs.)

TYPE 3XPB

.401

3/16”

5/32”

2 –7/8”

7–7/8”

TYPE 4XPB

.401

1/4”

3/16”

3–1/16”

8–7/8”

2–1/2

.401

1/8”

3/32”

2 –1/4”

6–11/16”

2–1/4

2 –7/8”

7– 5/16”

2 – 5/16

3–1/16”

8– 5/16”

2 – 3/4

TYPE 2X

TYPE 3X

Equivalent To: CP–4444–RURAB

.401

3/16”

5/32”

Equivalent To: CP–4444–RUSAB

.401 TYPE 4X

TYPE 5X, 7X, 9X

1/4”

3/16”

Equivalent To: CP–4444–RUTAB

.498 1/4” .498 3/8” .498 5/16” Equivalent To:

1/4” 5/16” 1/4”

2–11/16” 5–13/16” 3–7/8”

8–15/16” 11–15/16” 9–15/16”

4–3/4 6 5–1/8

CP–4447–RU SERIES

Cleco® F Series Riveters

F2-PT-RT

F4-PT-RT

Model Number Bee Hive Retainer

For driving 1/8”-1/4” (3-6mm) rivets Standard beehive retainer Built-in air regulator controls power output Spool valve for precise speed control Stroke

Bore in.

in.

Blows Per Minute

For Use With Rivet Set Shank Dia.

Length

Weight

in.

.401 .401

10.2 10.2

6.7 8.7

170 222

2.7 3.3

1.2 1.5

F Series Riveters – Round Taper Nose – Pistol Grip

F2-PT-RT-B F4-PT-RT-B

0.58 0.58

14 14

2.0 4.0

52 102

3900 1700

EXCELLENT FOR RIVETING, TEASING THROTTLE, ALUMINUM HANDLE, .401 SHANK Cat. No.

270 A-1 270 A-2 270 A-4

Blows Per Minute

Stroke Ins.

overall Length ins.

Net. Wt. Tool Only Lbs. Oz.

Capacity

Interchangeable with

2000 2500 1700

3 2 4

6-3/4 5-3/4 7-3/4

3-3 3-0 3-8

3/16” steel rivet 5/32” steel rivet 1/4” steel rivet

AVC 12 AVC 11 AVC 13

AIRCRAFT RIVETING HAMMERS WITH TRIGGER CONTROL OTHER NEW AND REBUILT MODELS AVAILABLE SHANK RIVET CAPACITY STROKE LGTH. SIZE ALUM. STEEL

S REPAIR EXPERT D N BRA S ON ALL

.401

TYPE 1X (SHORTIES)

WGT. (lbs.

5/32”

1/8”

1-7/8”

4”

2-1/8”

.401 Jiffy

5/32”

1/8”

1-7/8”

3-5/8”

2-1/4”

.401 Jiffy

3/16”

5/32”

2-1/4”

5-3/8”

3-1/4”

Jiffy

100B 200B

SUPER SHORTIES SEE PAGES 15&16 FOR RIVET SETS

INGERSOLL- RAND LIGHTWEIGHT RIVETERS For driving 1/8”– 3/8” (3-10 mm) rivets Features: * Accurate and EASILY controlled tease throttle * Standard beehive retainer – allows use of a wide variety of accessories * Built-in power regulators on A1 & B1 Models – operator can change power on the job – no downtime!

AV C 1 3 A 1

AVC10A1 Model Cold Rivet Capacity Diameter

Length

Weight

Less

Dural & Aluminum

Soft Iron

in.

Handle

Accessory

in.

Accessory

in.

Blows

For Use With

Piston

per

Rivet Set Shank

Stroke

Minute

in.

Bore in.

Diameter mm

in.

CFM

Industrial/Aerospace AVC10A1

1/8

Pistol

152

2-3/16

1.28

1-7/8

3200

9/16

.401

AVC10C1

1/8

Straight

6-25/32

172

2-1/16

.94

1-7/8

3200

9/16

.401

AVC12A

3/16

Pistol

7-3/4

197

3-3/8

1.53

2100

9/16

.401

AVC13A1

1/4

Pistol

8-3/4

222

3-11/16

1.67

101

1725

9/16

.401

AVC26A1

3/8

5/16

Pistol

11- 5/16

287

5-1/8

2.32

152

1120

3/4

.498

AVC26B1

3/8

5/16

Goose Neck

13-15/16 354

3.18

152

1120

3/4

.498

AVC26B1

.498

3/8”

5/16”

6”

NEEDLE SCALERS FP1060 4–3/4 lbs. 19 Needles – 5” Long In de-rusting and cleaning of metals, peening of welded joints, cleaning of hardened concrete from construction equipment, the FP-1060 Needle Scaler offers versatility for working in confined space or contoured surface with low air consumption. The needles adapt themselves to any curved or uneven surface.

EXTRA NEEDLE NO.109130 ____________

13-15/16”

7 lbs.

AIR HAMMERS CP711 STANDARD DUTY .401 Shank 3-1/2lbs Length 6-3/4” 3500 BPM

CP715 HEAVY DUTY

.401 Shank 4-1/2 lbs. Length 9” 2100 BPM

AIR HAMMER ACCESSORIES FITS MODELS 2X, 3X, 4X, CLECO “E” SERIES

NO. 5210 BEE HIVE SPRING

NO. 5120 QUICK CHANGE RETAINER

NO. 5130 SAFETY CHUCK CHISEL HOLDER

SWIVEL POWER REGULATOR #94407 – COMPOSITE 12

RH – 3 RB – 3 FITS MODEL AVC

RB – 4 RH – 4 FITS MODELS 5X, 7X, 9X

AIR HAMMER ACCESSORIES 2-1/2”

RIVET SETS USE WITH NO.1040 & NO. 1042

90º RIVETING ATTACHMENTS

TO ORDER — SPECIFY PART NUMBER, RIVET SIZE EXAMPLE NO. 1173 - 4704 FOR 1/8” CUP

SHANK ADAPTERS

RIVET FAN SPACING TOOL PART NO. F501

TYPE

No. OF FINGERS

SPACING RANGE

Overall Length (open)

STANDARD

1/2” (13mm) Closed to 2” (51 mm) Open

38” (97 cm)

The RIVET SPACING TOOL is used to line up rivet holes. Simply expand or contract the fan, the accordion action gives you the spacing you need to set holes with precise accuracy. * LAYOUT AND MARK EQUALLY SPACED HOLES * CLEVER ACCORDION GATE STYLE * UNEQUALLED FOR SPEED & ACCURACY

STRAIGHT RIVET SETS

CUPPED 1/16” THRU 1/4”

.401

10SP802

10SP803

10SP804

10SP805

10SP806

10SP808

10SP852

10SP853

10SP854

10SP855

10SP856

10SP858

10SP1572

10SP1573

10SP1574

10SP1575

10SP1576

10SP1578

“AS” AVAILABLE ON REQUEST

(Note: Specify SM30- Series For .498 Shank

10º OFFSET RIVET SETS

Ex: SM30-4708 for 1/4” AN470 Set)

CUPPED 1/16” thru 1/4”

10º

.401

20SP802

20SP803

20SP804

20SP805

20SP806

20SP808

20SP852

20SP853

20SP854

20SP855

20SP856

20SP858

20SP1572

20SP1573

20SP1574

20SP1575

20SP1576

20SP1578

“AS” AVAILABLE ON REQUEST

(Note: Specify SM40- Series For .498 Shank

RIVET SETS FOR BOEING BACR 15 FT MODIFIED UNIVERSAL STRAIGHT RIVET SIZE AND PART NUMBER

BOEING CUPPING

5/32 MODIFIED UNIVERSAL

AN470BAC

3/16

7/32

104705BAC 104706BAC

1/4

104707BAC

9/32

104708BAC 104709BAC

L = 3 1/2 OFFSET RIVET SIZE AND PART NUMBER

BOEING CUPPING

5/32 MODIFIED UNIVERSAL

AN470BAC

3/16

7/32

204705BAC 204706BAC

1/4

204707BAC

9/32

204708BAC 204709BAC

TO ORDER: SPECIFY PART NUMBER AND DESIRED LENGTH

STRAIGHT BELL RIVET SETS 1/4” – 5/16” – 3/8” RIVET SIZE AND PART NUMBER

RIVET HEAD CUPPING UNIVERSAL ROUND FLAT(CUPPED) BRAZIER MOD. BRAZIER

1/4 AN-470 AN-430 AN-442 AN-455 AN-456

5/16 SM5047010 SM5043010 SM5044210 SM5045510 SM5045610

SM 504558

3/8 SM5047012 SM5043012 SM5044212 SM5045512 SM5045612

BRITISH STYLE CUPPING Round/SNAP SP80*

SP808

SP8010

SP8012

MUSH SP85*

SP858

SP8510

SP8512

SP157*

SP1578

SP15710

SP15712

LENGTH (L) 3-1/2 5-1/2 7-1/2 10-1/2

*A.S. AVAILABLE ON REQUEST

PRICE 1-5

NOTE:

AVAILABLE 10º OFFSET, SPECIFY SM60, FOR .498 SHANK, SPECIFY SM70 TO ORDER: SPECIFY PART NUMBER AND DESIRED LENGTH (“L”)

JIFFY SETS SERIES “B” JIFFY SERIES “B” FLUSH SETS

Part No.

“A”

Shank “S”

Length “L”

SMJ500

3/8

.401

1-3/16

SMJ501

1/2

.401

1-3/16

SMJ502

5/8

.401

1-3/16

STRAIGHT SMJ510*–

Jiffy Series “B” Cupped Sets Rivet Size Universal

FOR USE WITH MODELS 1X, 100B AND 200B RIVET GUNS

AN470

3/32 1/8 4703 4704

Price

OFFSET SMJ520–

5/32 4705

3/16 4706

1/4 4708

Price

EXAMPLES: To Order– .401 – 5/32 AN470 – Straight, Specify SMJ510-4705

BRITISH STYLE CUPPING Round/SNAP SP80*

SP803

SP804

SP805

SP806

SP808

MUSH SP85*

SP853

SP854

SP855

SP856

SP858

SP157

SP1573

SP1574

SP1575

SP1576

SP1578

*A.S. AVAILABLE ON REQUEST

RIVET SETS FOR USE WITH JIFFY SERIES “B” TYPE RIVETERS

DOUBLE OFFSET CUPPED RIVET SETS TO ORDER: EXAMPLE: SPECIFY:

Specify Part Number and desired Rivet Head Cupping To order 3/16 AN-470 for .401 type Shank, 7 /2” longSM131-4706

SM130 SM131 SM132 SM133

GOOSENECK RIVET SETS

TO ORDER: Specify Part Number and desired Rivet Head Cupping EXAMPLE: To order 3/32 AN-470 for .401 Shank – Specify ST G01-4703

STG01 STG02

TRANSFER PUNCHES

Part Number SMDP (Dash No.)

.401 SHANK

STRAIGHT TUBULAR RIVET SETS (AN-450)

* SPECIAL SM104502 SM104503

TO ORDER: Specify Part No.

SM104504 SM104505 SM104506 SM104508

3-1/2”

LENGTH

EXAMPLE: To order .401 Shank 1/8 AN-450 Specify: SM 104504

SEE PAGE 93 FOR ROTARY REMOVAL CUTTERS

SMHSC401-4 SMHSC401-5 SMHSC401-6 SMHSC401-8 SMHSC401-10 SMHSC401-12

1/8 5/32 3/16 1/4 5/16 3/8

AT106A FLUSH SET, SWIVEL–TYPE Performs high-speed flush riveting on flat or curved surfaces and is designed for ease of handling, with a swivel action to produce quick alignment. The highly polished rivet set head is enclosed in a rubber sleeve and can be easily hand assembled or disassembled.

SHANK DIA. A .401 B .498 WHEN ORDERING SPECIFY: BASIC PART NO. SHANK DIA. EXAMPLE: AT 106A

CUT-A-WAY VIEW

STRAIGHT FLUSH SETS

STRAIGHT “B.D.” (BODY DIAMETER) PART NUMBER 3/8 10375 1/2 10500 5/8 10625

LETTER

LENGTH 2-1/2” 3-1/2” 5-1/2” 7-1/2” 10-1/2”

OFFSET PART NO. 20375 20500 20625

Specify Part Number and desired “L” Dimensions (Length) Note: Add “B” after Part No. for 498 Shank.

FLUSH SETS STRAIGHT FLUSH SETS (MUSHROOM) .498 SHANK

.401 SHANK PART NO.

LENGTH (L)

DIA (D)

MM151-1 MM170-1 SM90 SM91 SM92 SM93 SM94 SM95 SM96 SM97 SM98 SM99

2-1/8 3-1/2 2-1/2 3 5-1/2 7-1/2 3 5-1/2 3 3 2-1/8 2-1/4

3/4 3/4 1 1 1 1 1-1/4 1-1/4 1-1/2 1-3/4 1-1/8 1-1/4

PRICE

PART NO.

LENGTH (L)

DIA (D)

MM151-1B MM170-1B SM100 SM101 SM102 SM103 SM104 SM105 SM106 SM107 SM108 SM109

2-1/8 3-1/2 2-1/2 3 5-1/2 7-1/2 3 5-1/2 3 3 2-1/8 2-1/4

3/4 3/4 1 1 1 1 1-1/4 1-1/4 1-1/2 1-3/4 1-1/8 1-1/4

PRICE

10o OFFSET FLUSH SETS (MUSHROOM) .401 SHANK

.498 SHANK

PART NO.

LENGTH (L)

DIA (D)

SM140 SM141 SM142 SM143 SM144 SM145

3-1/2 5-1/2 7-1/2 3-1/2 5-1/2 7-1/2

1 1 1 1-1/4 1-1/4 1-1/4

PRICE

PART NO.

LENGTH (L)

DIA (D)

SM160 SM161 SM162 SM163 SM164 SM165

3-1/2 5-1/2 7-1/2 3-1/2 5-1/2 7-1/2

1 1 1 1-1/4 1-1/4 1-1/4

PRICE

NOTE: QUANTITY DISCOUNTS (6, 25, 50,100)

FLUSH SWIVEL SETS D

FACE DIA. (D) PART NO. PRICE

3/4 SM180

1-3/16 SM181

3”

FLUSH (MUSHROOM) SETS WITH RUBBER GUARD 2-1/2” Approx.

PRICE SHANK(S)

DIA(D)

SM170

.401

3/4

SM171

.401

SM172

.401

1-1/4

SM173

.498

3/4

SM174

.498

PART NO.

.498

1-1/4

SM170-2

REPLACEMENT

3/4

SM171-2

RUBBER

SM172-2

GUARD

1-1/4

SM175

1-3/4” to 2-1/8

SHORT FLUSH SETS WITH SPRING GROOVE

D .401 or .498 Diameter

.401 SHANK (S) PART NO. DIA (D) MM151-1 3/4 MM151-2 1 MM151-3 1-1/4 MM151-4 1-1/2

PRICE

.498 SHANK (S) PART NO. DIA (D) MM151-1B 3/4 MM151-2B 1 MM151-3B 1-1/4 MM151-4B 1-1/2

PRICE

Flush Sets with Aluminum or Brass Face 3-1/2”

Part No.

Shank

Head

SM50-1A

.401

ALUM.

SM70-1A

.498

ALUM.

SM50-1B

.401

BRASS

SM70-1B

.498

BRASS

SHANK 1” FACE

HIGH SHEAR STRAIGHT SETS 1/8” thru 1/4”

PRICE 1-5

.401 SHANK PART NO. LENGTH (L) SMHS103-1/2 SMHS115-1/2 SMHS127-1/2 SMHS152-3/4

.498 SHANK PART NO. LENGTH (L) SMHS303-1/2 SMHS315-1/2 SMHS327-1/2 SMHS352-3/4

PRICE

Made in 1/8, 3/16 and 1/4 Rivet Sizes TO ORDER: Specify Part No. followed by Rivet Size desired. EX: SMHS10-3/16 TO ORDER: Sets for Stainless Steel or Monel Rivets add Letter “M” to Part No.

HIGH SHEAR 100 OFFSET SETS 1/8” thru 1/4”

PRICE

.401 SHANK PART NO. LENGTH (L) SMHS203-1/2 SMHS215-1/2 SMHS227-1/2

.498 SHANK PART NO. LENGTH (L) SMHS403-1/2 SMHS415-1/2 SMHS427-1/2

PRICE

TO ORDER: Specify Part No. followed by Rivet Size Desired TO ORDER: For Steel or Monel Rivets add Letter “M” to Part No.

HIGH SHEAR STRAIGHT SETS 5/16” thru 3/8”

PRICE

.401 SHANK PART NO. LENGTH (L) SMHS503-1/2 SMHS515-1/2 SMHS527-1/2

.498 SHANK PART NO. LENGTH (L) SMHS703-1/2 SMHS715-1/2 SMHS727-1/2

PRICE

NOTE. QUANTITY DISCOUNTS – 6, 25, 50, 100 each

RIVET SETS STRAIGHT RIVET SETS for HUCK LOCKBOLTS

STRAIGHT RIVET SETS for HUCK LOCKBOLTS

1/8” thru 3/16”

1/4” – 5/16” – 3/8”

.401 SHANK

PART NO.

LGTH (L)

PART NO.

LGTH (L)

SMH10 SMH11 SMH12 SMH13 SMH15

3-1/2 5-1/2 7-1/2 10-1/2 2-3/8

SMH50 SMH51 SMH52 SMH53

3-1/2 5-1/2 7-1/2 10-1/2

– – – – –

– – – –

.498 SHANK

PART NO.

LGTH (L)

PART NO.

LGTH (L)

SMH30 SMH31 SMH32 SMH33 SMH35

3-1/2 5-1/2 7-1/2 10-1/2 2-3/8

SMH70 SMH71 SMH72 SMH73

3-1/2 5-1/2 7-1/2 10-1/2

– – – – –

– – – –

100 OFFSET RIVET SETS for HUCK LOCKBOLTS 1/8” thru 3/16”

.401 SHANK

.498 SHANK

PART NO.

LGTH (L)

PART NO.

LGTH (L)

SMH20 SMH21 SMH22 SMH23

3-1/2 5-1/2 7-1/2 10-1/2

SMH40 SMH41 SMH42 SMH43

3-1/2 5-1/2 7-1/2 10-1/2

– – – –

TO ORDER STRAIGHT OR OFFSET HUCK SETS: Specify Part No. and desired Rivet Size EXAMPLE : To order 5 1/2” Offset for a 5/32 Bolt, .401 Shank – SPECIFY : SMH21-5/32 NOTE: QUANTITY DISCOUNTS (6, 25, 50,100 each) 23

KNOCK-OUT PUNCHES

.401SHANK

.498 SHANK RIVET SIZE 3/32 1/8 5/32 3/16 1/4 5/16 3/8

PART NO. STK3 STK4 STK5 STK6 STK8 STK10 STK12

PART NO. STK3B STK4B STK5B STK6B STK8B STK10B STK12B .401 or .498

TO ORDER: Specify Part No. and desired Length (L). EXAMPLE: To Order .498 Shank for 3/16 Rivet, 5-1/2” Long–

LGTH(L) PRICE:

SPECIFY: STK6Bx5-1/2

3-1/2

5-1/2

NOTE: .498 shank, add

SPECIAL KNOCK-OUT PUNCHES (For High-Shear Rivets)

RIVET DIAM. PART NO

3/32 STK3X

1/8 STK4X

5/32 STK5X

If .498 Shank is desired – Specify, “B”

RIVET SET EXTENSION ADAPTER

.401 SHANK(S) 24

PART NO. ST401E

3/16 STK6X

1/4 STK8X

5/16 STK10X

3/8 STK12X

BUCKING BARS #111

#112

2-3/4 LBS.

(MM320-19)

#601M

1-1/2 LBS.

(MM320-4)

#634 (MM320-2)

6 LBS.

1LBS.

6 1/4 2 3/4

#638

(MM320-1)

1-1/4 LBS.

#653

(MM320-27)

3 LBS.

#676

(MM320-20)

#646 2-1/4 LBS.

#656

3-1/4 LBS.

(MM320-12)

1-1/4 LBS.

#692

3/4 LBS.

#751

#647

(MM320-39)

3 LBS.

#753 .

#649 (MM320-32)

1-1/2 LBS.

#669

(MM320-14)

1-1/4 LBS.

#715

(MM320-40)

2 LBS.

#760B-2 1-1/4LBS.

“WE QUOTE ON OTHER BARS”

2 LBS.

#670 (MM320-5) 1-3/4 LBS.

#736 1-3/4 LBS.

#760B-10 1-1/4LBS.

AVIATION MAINTENANCE KITS INCLUDES THE FOLLOWING: 1. Model 3X or 4X rivet hammer with power regulator. 2. #105 rivet set kit (5 pieces) 3. #670 bucking bar 4. #1300 rivet cutter 5. #200 Cleco pliers

6. #K40 Cleco Pak (40 pieces) 7. #KT84218, 3/8” air drill (2600 rpm) 8. 6 assorted drill bits (#40, 30, 21, 11) 9. Drill stops for above 10. #17800 Polymer Resin Box with tote tray

VALUE: PART NO. 3XAMK PART NO. 4XAMK

MASTER AVIATION KIT INCLUDES THE FOLLOWING: 1. Model 3X or 4X rivet hammer 2. #1200 power regulator 3. #670 bucking bar 4. #751 bucking bar 5. #K200 Cleco pliers 6. 40 pcs. Clecos 7. #KT84218, 3/8” drill 8. 6 pcs. assorted drill bits (#40,30,21,11) 9. 4 pcs. drill stops 10. 105 rivet set kit (5 pcs.) 11. #1300 rivet cutter 12. #3K angle drill kit 13. #330SK Micro countersink kit 14. #19800 Polymer resin box with tote tray 3XMK................................... 4XMK...................................

VALUE:

WE C MAK AN E ANY UP PER KIT Y O REQ UIRE UR MEN T

FIVE PIECE RIVET SET PACKAGES STRAIGHT RIVET SET MIX .401SHANK

OFFSET RIVET SET MIX .401 SHANK

3-1/2” LENGTH OR 5-1/2” LENGTH 3/32” – 3/16” UNIVERSAL (AN470), AND FLUSH SET

NO. 105 3-1/2”L NO. 115 5-1/2”L

NO. 205 3-1/2”L NO. 215 5-1/2”L

FIVE PIECE BUCKING BAR KIT (MOST POPULAR STYLES) #112

#638

#656

#669

#670

#5BB.............................................

TEN-PIECE BUCKING BAR KIT #112 #692

#638 #736

#656 #751

#10BB.............................................

#669 #753

#670 #760 B-2

CHERRY LOCK RIVETERS

G784

HYDRO-SHIFT CherryLOCK® RIVETER

SPECIFICATIONS FOR G784

The Cherry G784 Hydro-Shift Riveter is a pneumatic hydraulic tool designed for the most efficient installation of nearly all diameters of CherryLock Rivets up to 1/2” grip, (“A” Group Only), It can be operated in any position with one hand. With proper adapters & pulling heads, this tool can be used to install other types of rivets. See section below on “Pulling Heads” for correct pulling head & adapter part #s. HYDRO-SHIFT CherryLOCK Riveter Kit National Stock Number: 5130-00-935-4681

Air Pressure: Stroke: Pulling Force: Weight:

The H68OB200A Pulling Head is designed to enable the CherryLock Hydro-Shift riveting tools, such as G685S, G689, and G784 to install CherryMax Rivets.

G 784 PulIing Heads

H680B208 Pulling Head For 1/4” CherryMax Rivets

This Pulling Head attaches directly to the Cherry G784 or G689 Hydro-Shift Riveter for installation of 1/4” diameter CherryMax Rivets.

H681 PULLING HEAD The H681 Series Pulling Head fits directly onto the tool to install both Bulbed and Standard CherryLOCK® Rivets.

3/32”

1/8”

5/32”

3/16”

1/4”

PULLING HEAD NUMBER

G-695B Right Angle CherryLOCK Riveter National Stock Number: 5130-00-435-5689

DIMENSIONS

H681-3C Countersunk Head (MS 20426) H681-4C Countersunk Head (MS 20426) H681-4F Countersunk Head (1560) H681-4S Countersunk Head (NAS 1097) H681-B166-4 Uni-sink Head H681-5C Countersunk Head (MS 20426) H681-5F Countersunk Head (1560) H681-5S Countersunk Head (NAS 1097) H681-B166-5 Uni-Sink Head H681-6C Countersunk Head (MS 20426) H681-6F Countersunk Head (1560) H681-6S Countersunk Head WAS 1097) H681-B166-6 Uni-Sink Head H681-8C Countersunk Head (MS 20426) H681-8S Countersunk Read (NAS 1097)

.163 .208 .430 .174 .250 .269 .535 .225 .313 .335 .625 .281 .375 .458 .374

.332 .341 .358 .341 .359 .352 .338 .352 .377 .386 .367 .386 .419 .398 .398

OTHER PULLING HEADS THAT WILL FIT THIS TOOL ARE SHOWN ON THE CHART BELOW PULLING HEAD H9055-3 H9055-4 H9055-5 H9055-6 H9015-3C H9015-4C H9015-5C H9015-6C H9040-4C H9040-5C H9040-6C H9040-8C H642-4C40 H642-5C40 H642-6C40 H642-8C40 H680-B200A H781-456 H753A-456

TYPE

ADAPTER

RIVET

Straight

680B46

CherryLOCK “A”

Straight

680B46

680B57

Offset

680B57

CherryLOCK

Straight Offset Right Angle

680B205 680B205

CherryMAX CherryMAX CherryMAX

*8 grip for protruding head, 9 grip for countersunk head.

RIVET DIA. 3/32 1/8 5/32 3/16 3/32 1/8 5/32 3/16 1/8 5/32 3/16 1/4 1/8 5/32 3/16 1/4 1/8, 5/32, 3/16 1/8, 5/32, 3/16 1/8, 5/32, 3/16

90 PSI (6.2bar) Min./110 PSI (7.6 bar) Max 7/8 inch (22.2 m) 2,600 lbs (11.57kN)@90 PSI (6.2bar) 8 lbs (3.63 kG)

H680B200A CherryMaxPulling Head

Pulling Heads are not furnished with the riveter and must be ordered separately.

RIVET DIA.

AIRS T REP EXPERALL TYPE S ON Y GUN CHERR

MAXIMUM GRIP ALL 8,9* 8,9* 8,9* ALL ALL ALL ALL ALL ALL ALL ALL 8,9* 8,9* 8,9* 8,9* ALL ALL ALL

The G695B Right Angle riveter is a pneumatic-hydraulic tool designed specifically for installing CherryLOCK® rivets in limitedaccess areas. The power unit rests on the floor and is connected to the right angle head unit with 8 feet of flexible hose. SPECIFICATIONS: Air Pressure: 90-110 PSI Stroke: .625” Pulling Force: 2000 lbs Weight: 17 lbs

G695B Pulling Heads Pulling heads are not furnished with the riveter and must be ordered separately.

For Standard CherryLOCK® Rivets (NAS1398 & 1399) ALUMINUM

Pulling Head

Rivet Dia.

CR2163 CR2263 Univ. Head

H690-4C/U H690-5C/U H690-6C/U H690-8C/U

-4 -5 -6 -8

4 4 4 4

MONEL

STAINLESS STEEL

CR2162 CR2262 Ctsk. Head

CR2563 Univ. Head

CR2562 Ctsk. Head

CR2643 CR2653 CR2663 Univ. Head

CR2642 CR2652 CR2662 Ctsk. Head

4 4 4 4

4 4 4 -

4 4 -

0.5” (12.7mm)

G30 Hand Riveter For Installation of CherryLOCK® 'A' locked Spindle, rivets CR2672, & CR2673. National Stock Number: 5120-01-416-7826.

2” (50.8mm)

DESCRIPTION The Cherry® G30 Hand Riveter is an efficient, compact, lightweight and economical tool for installation of CherryLOCK® ‘A’ rivets. Provided with this tool is a special designed nose piece which is essential for the proper insertion of the rivet locking collar. To operate, insert the serrated stem of the rivet into the nosepiece. Insert the rivet into the application, holding the riveter nosepiece firmly and squarely against the rivet head and squeeze the handles to install the rivet. On longer grip rivets, additional strokes will be required. G30 riveter can pull the following rivets:

9.25” (234.9mm)

3/32 ‘A’ Code Rivets CR2672 CR2673 NAS1399C3A( ) NAS1398C3A( )

CherryMAX® Blind Rivet Tooling RIVET PART NUMBER AND TOOL CROSS REFERENCE All rivet part numbers listed below can be installed with the Cherry power tools listed below.

VERSATILE A NEW, MORE FOR PULLING HEAD TIONS LICA AP E AC SP AERO

CHERRY® H782 PULLING HEAD

The Cherry® brand H782 is a new universal, off-set pulling head capable of installing a broad variety of pull-type fasteners. Its strength, light weight and compact dimensions make it ideal for a diverse range of applications including restricted spaces. VERSATILITY – A two-jaw offset pulling head capable of installing CherryMAX® rivets, CherryLOCK™ “A” code rivets, MaxiBolt™ “S” Type blind bolts, MBC® rivets, SPR® rivets, NAS 1398 A & AB code products, MS90353/4, MS21140/1 “U” 05, NAS 1719, 1720, & 1721 and pull-through type nut plate rivets by simply changing the threaded nosepieces. (see table for the complete list.) ECONOMICAL – Use this pulling head in place of straight and offset pulling heads and take advantage of the wide range of nosepieces to save on additional pulling heads. Mounts directly on our CherryMAX® power riveters including the lightweight G747, the long stroke G746A and our powerful G704B.

NOSEPIECE SELECTION CHART Part Number 782-456 (Included with H782)

782-6AL 886-003 886-004 886-005 886-006 782-5BB 782-4MBC 782-5MBC 782-6MBC 782-3

Installs These Fasteners CherryMAX® 4,5,6 Diameter CherryMAX® AB 4,5,6 Diameter (Except -6 Diameter All Aluminum) MBC® L/C 4,5,6 Diameter “S” Type Blindbolt -04,-05 Diameter CherryMAX® AB -6 Diameter All Aluminum CherryLOCK™ “A” Code -3 Diameter CherryLOCK™ “A” Code -4 Diameter CherryLOCK™ “A” Code -5 Diameter CherryLOCK™ “A” Code -6 Diameter “U” Type Blindbolt -05 Diameter Standard MBC® -4 Diameter Standard MBC® -5 Diameter Standard MBC® -6 Diameter Nut Plate Rivet & SPR® -3 Diameter Nosepieces Sold Separately

S REPAIR EXPERT OOLS T ON ALL

CHERRYMAX RIVETERS This new compact power riveter weighs only 3.625 pounds, yet has the power of much larger and heavier tools. The G747 riveter installs –4, -5, and –6 CherryMax® rivets in all grips and materials. The lightweight and compact ergonomic design greatly reduces operator fatigue. The angled pulling head allows installing rivets using a natural hand position for optimum comfort. This tool can be operated in any position with one hand, and offers a choice of straight, right angle, and offset pulling heads. STROKE: .437 PULLING CAPACITY: 2100 lb. @ 90 psi

G747 POWER RIVETER 3/4” (19.05 mm)

CherryMAX® Power Tool

National Stock Number: 5130-01-393-1584 Military Part Number: M85188T2

G-27 HAND RIVETER The Cherry G-27 Hand Riveter is designed specifically for the most efficient installation of 1/8” CherryMAX rivets.Overall length of the G-27 is 9-1/4”, the net weight is just 13 ounces and the pulling head is an integral part of the tool. This compact, lightweight tool is also available in a rugged plastic case as P/N:G27KIT.

1-3/4” (44.45 mm)

DESCRIPTION 11” (279.40 mm)

2-1/8” (53.97 mm)

4-15/16”

PULLING FORCE

(125.41 mm)

G747CMR LIGHTWEIGHT CHERRYMAX® POWER TOOL KIT

The Cherry G704B is a pneumatic-hydraulic tool designed specifically for the most efficient installation of CherryMAX® rivets. Its durable, all metal housings makes this extremely robust tool ideal for use in rugged shop environments. This tool utilizes straight, offset and right-angle pulling heads, all of which can install –4, -5, and –6 diameter CherryMAX® bulb type rivets in all head styles, materials and grip lengths. Extensions are available for extending the pulling heads to reach limited access areas. See the section on pulling heads for the correct pulling head part number. Weight: 4-1/4 pounds.

G704B RIVETER

3100 Pounds (13.79 kn) @ 90 PSI (6.2 bar)

G704B

This kit contains one each of the following items:

700A77

Bleeder Bottle

G747

269C3

Grip Gage

Pneumatic-hydraulic Riveter

H701B-456 Straight Pulling Head for 1/8” to 3/16” Rivets/Parts List

CA-22

CherryMAX Reference Card

H781-456

Manual

G747 Maintenance Manual

H753A-456 Right Angle Pulling Head for 1/8” to 3/16” Rivets/Parts List

CA-07

CherryMAX Process Manual

H747-3NPR Straight Pulling Head for Nut Plate 3/32” Rivets

P1393

Carrying Case

670A20

Stem Catcher Bag

Offset Pulling Head for 1/8” to 3/16” Rivets/Parts List

1-3/4”

G747 & G704B PULLING HEADS Pulling Heads are not furnished with the riveter and must be ordered separately.

3/4”

H701B-456 Straight NSN5130-01-393-2927 Military Part Number M85188S1

G704B-SR

5-7/16”

3/16 CAP.

4-3/8” 1-7/16” 2-1/4” 1-15/32” 3/8”

H753A-456 Right Angle

H781-456 Offset

NSN5130-01-393-2926 Military Part Number M85188S2

NSN5130-01-393-2925lol Military Part Number M85188S3

CHERRYMAX® RIVETERS G750ACMR HAND RIVETER TOOL KIT NSN5120–01-432-6190

G750A Lightweight Hand Riveter National Stock Number: 5120-01-432-9361 DESCRIPTION The Cherry® G750A hand hydraulic riveting tool provides the versatility of pneumatic-hydraulic riveter, but with the lightweight, high pull strength ratio desirability not found in other hand riveters. The Cherry G750A has a unique 2-stage hydraulic power cylinder that provides the user with the ease of pulling the handle without the strain normally endured to install a high strength fastener. This patentable 2-stage power feature allows the user to squeeze the handle throughout the increase power requirement, without feeling the need to squeeze harder to install the fastener. The Cherry® G750A hand riveter can install a variety of blind fastener styles, diameters, head configurations, and material combinations. The G750A with the standard pulling head can install CherryMAX® and SST™ blind rivets in -4, -5, -6, diameters, and -05, -06 diameter MaxiBOLT blind bolts or threaded inserts by simply changing the pulling head. The straight pulling head is provided with the tool.

SPECIFICATIONS FOR G750A STROKE PULLING FORCE WEIGHT OVERALL HEIGHT OVERALL LENGTH PULLING HEADS

.750 inches (19.06 mm) 3800/4200 lb. 1.9 lbs. (861.8 grams) 6.4 inches (162.5 mm) 7.75 inches (196.8 mm) Straight, Offset, Right Angle, Threaded inserts

G750A PULLING HEADS AND ACCESSORIES The Cherry G750ACMR hydraulic riveter tool kit includes the G750A with a straight pulling head, adapter assembly, a right angle pulling head, an offset pulling head and a sturdy plastic carrying case.

G750ACMR KIT CONTENTS Item No. 1 2 3 4 5 6

Qty. 1 1 1 1 1 1

Part No. Description G750A Hand Riveter (includes Pulling Head) H781-456 Offset Pulling Head H753A–456 Right Angle Pulling Head 75OA-088 Adapter Assembly TLIT H781-456 H781-456 Tool Sheet TLIT H753A–456 H753-456 Tool Sheet

CHERRY® NUT-PLATE RIVETERS G702A POWER RIVETER

G902 POWER RIVETER

The Cherry G702A – a pneumatic/hydraulic tool designed specifically for the most efficient installation of Cherry Nut-plate rivets. It weighs just over 3-1/2 lbs., has a 3/4” stroke and a rated pull load of 1000 lbs. @ 90 psi air pressure at the tool.

* Lightweight (only 2.0 lbs.) * Installs -3, 2.5mm, 3mm and -4 Nut-Plate Rivets. Also -3 SPR and -3 CherryLock “A”. * Compact handle design

The G702A Riveter operates on air pressure of 90 to 120 psi. At 90 lbs. air pressure, the G702A does not exceed 85dB(A) and consumes 2 cfm at 20 cycles per minute. Pulling heads are not furnished with this tool. They must be ordered separately. Use a H702-3NPR pulling head with the appropriate nosepiece: NOSEPIECE PART NO. -3 DIA = 728A9-3 -4 DIA = 728A9-104

SPECIFICATIONS PULLING 550 lbs. @ 90 psi. CAPACITY: 730 lbs. @ 120 psi. PULLING HEADS H902-3NPR(+) = 3/32” Nut -Plate H902-4NPR = 1/8” Nut-Plate (+) Replace nosepiece with 902–038 nose to install 3/32” CherryLock “A” Rivets.

G 29 HAND RIVETER

H747-3NPR Pulling Head

The Cherry G 29 Hand Riveter is a compact, lightweight tool for Installing Cherry Nut-plate rivets. The G 29 is 9-1/4” long, weighs 13 oz. and has a stroke of 5/16”. The pulling head is an integral part of this tool and comes equipped with a 728A9-3 nosepiece to install 3/32” rivets. To install 1/8” rivets, replace the 728A9-3 nosepiece with a 728A9-104 nosepiece which must be ordered separately.

For use on: G747 , G746 and G704B to install Nut-Plate Rivets.

CHERRYMAX® RIVET TOOLING Combinations of these extensions may be used to reach many restricted installation areas by increasing the overall length of the puling head. 704A12-2 704A12-4 704A12-6 704A12-12

(2”) (4”) (6”) (12”)

NSN NSN NSN NSN

EXTENSIONS

5130-01-145-0206 5130-01-145-0207 5130-01-145-0208 5130-01-178-0331

These extensions will fit directly on to the G747, G704B, G749A, G845A and G746 CherryMAX® Riveters and will accept any of the pulling heads listed for those riveters in the Tool Selection Chart on page 30. 753B21 (1-1/8”) This extension increases the overall length of the H753A-456 right angle pulling head nosepiece to approximately 2-3/16”, enabling it to reach into more restricted areas.

CHERRYMAX® RIVETERS Pneumatic PT 100R.... TOOL INCLUDES: 1/8, 5/32, 3/16, 1/4 CHERRYMAX NOSE TIP.

Cherry Max® (Note: The PT 100 R is not to be used for installing Cherrylock® Rivets which require shifting tooling).

Special Pulling Heads Available

Extended Straight CherryMax®

Adapter Rated pulling capacity Offset CherryMax® F187 (maximum) 3500 lbs. Power source: 90 to 130 PSIG air operated hydraulic pump assembly Stroke (maximum): .625” Weight (without air fitting): 29 oz. Right Angle CherryMax® Sizes: 6” high, 6-3/4” Long, 1-7/8 wide

D 100 RN…. Hand Hydraulic D 100 RN KIT CONTAINS: D100 1 Rivet Tool. 3/32 Nutplate Rivet Nosepiece 1/8 Nosepiece for CherryMax Universal Nosepiece for Cherry Max (1/8, 5/32, 3/16) 6-32, 8-32, 10-32, 1/4-28 Pull-up Studs and driving anvils. Nosepiece for any standard pop style rivet. Plastic carrying case. 2-1/2 x 12-5/16 x 8-7/16) Special Pulling Heads Available. See Above.

269C3 GRIP GAGE . . . . . . . . . . . . . . . . A simple, self–explanatory gage for determining material thickness and proper rivet grip length.

Cherry “A” max® (thru –4 grip maximum) Cherry Nutplate Rivets F156 Cherry Commercial Rivets and Monobolts® F187, Adapter F156, 3/32 Nose Tip F168 3/16 Monobolt F169 1/4 Monobolt H749A-456 Straight Head H781-456 Offset Head H753A-456 R/Angle head

G 36 TYPE HAND RIVETER (#122) THIS TOOL WILL HANDLE SOME CHERRY KNOB STEM, (MS) SERRATED, CHERRYLOCK OR CHERRYMAX RIVETS WITH APPROPRIATE PULLING HEAD. PRICE NEW: (Less Pulling Head)

PULLING HEADS FOR SERRATED CHERRYMAX,OR HUCK 9SP RIVETS #121-1 –For 1/8” #121-2 –For 5/32” #121-3 –For 3/16” #121-0 –For 3/32”

HAND NIPPER

For Use On Model G-36 (#122) Or G715A Riveters

For Flush Trimming Cherry Rivets No. 209 . . . . . . . . . . . . . . . .

CHERRY LOCKBOLT TOOLS

G87* G87* G87*

A simple, self-explanatory gage for determining material thickness and proper lockbolt grip length.

G87* G87*

AIR BLEEDER To keep CherryMax hydraulic tools operating at peak efficiency, it’s essential the hydraulic system is kept full of fluid and free of air. This Cherry Air Bleeder quickly and easily removes all air assuring the complete filling of the tool with hydraulic fluid.

MODEL# 700A77 AIR BLEEDER NSN 5130-01-104-5372 For servicing all Cherry pneumatic/ hydraulic power riveters.

EXTREME TREY RIVET ORGANIZER * 7”x1 2”x2” (Units are stackable) * 8 Compartments 3” wide x 2-7/8” long x 1-3/4” deep * Thermoplastic Rubber Construction weighs .99 lb. * Drop-away handle for ease of carrying and storing MODEL #ET-8 33

DOTCO® RIVET SHAVERS Non-Reversible Model Number Small Handle Large Handle

Cutter Adjustment

Free Speed rpm

Weight lbs. kgs

Length in. mm

14CF Series – Pistol Grip – 0.4 hp (0.30 kW) – with Stabilizer 14CFS60-95

0.0005

29,000

2.3

1.0

8.2

210

14CF Series – Pistol Grip – 0.4 hp (0.30 kW) – without Stabilizer 14CFS60-98

0.00025

29,000

2.3

1.0

8.2

210

No. 14CF

14CN Series – Pistol Grip – 0.9 hp (0.67 kW) – with Stabilizer 14CNL60-95

0.0005 0.00025

20,000 20,000

4.5* 2.0* 4.5* 2.0*

8.9* 226* 8.9* 226*

No. 14CN

*For weight and length of large handle models, add 0.20 lb.(0.1kg) GENERAL: Air Inlet: 1/4” NPT - Use 5/16” (7.9mm) I.D. Hose All tools performance rated @ 90psi (620 kPa) air pressure STANDARD EQUIPMENT: Stabilizer and choice of skirt EXTRA EQUIPMENT: Carbide Cutters & Extended Skirts: See table

Part Number

Cutter Diameter in.

Carbide Cutter

5/16 3/8 7/16 1/2 9/16 5/8 3/4 1 1-1/4

– 14-4382 14-4383 14-4384 14-4385 14-4386 14-4387 14-4422 –

Skirts Std. Wide 14-4391 14-4392 14-4393 14-4394 14-4395 14-4396 14-4397 14-4410 14-4412

1” Extended Skirt 4” Extended Skirt 6” Extended Skirt Adapter Skirt Assembly Adapter Skirt Assembly Adapter Skirt Assembly

14-4401 – 14-4402 – 14-4403 14-4323 14-4404 14-4324 14-4405 – 14-4406 – – – – – – –

– – – 14-4334 – – – – –

– 14-4532 14-4533 14-4534 – – – – –

– 14-4302 14-4303 – – 14-4306 – – –

– 14-4312 – – – 14-4316 – – –

– 14-4512 14-4513 14-4514 – 14-4516 – – –

– – 14-4363 14-4364 – – – – –

– 14-4372 14-4373 14-4374 – – – – –

– 14-4572 14-4573 14-4574 – – – – –

15-20 Series Nominal Motor Power 0.6 hp

0.45 kW

Non-Reversible Inline

No. 15L2060-95

Model Number

Cutter

Free Speed

Adjustment

rpm

Weight

Length

lbs.

kgs.

in..

mm.

2.9

1.3

9.0

229

15-20 Series – Inline – 0.6 hp (0.45 kW) - with Stabilizer 15L2060-95

0.0005

25,000

SIOUX® RIVET SHAVERS No. RS9A-210-8 RIVET SHAVER Cuter capacity available up to 5/8”. Comes standard with 1/2” skirt. 18,000 RPM. This tool is designed for the rapid and accurate removal of protruding rivet heads of countersunk rivets, leaving them perfectly flush with the surrounding surface. A micrometer type adjustment is provided which enables the depth of the cutter to be altered by increments of .0005”. 1/4-28 female threaded spindle takes standard cutters. RS9A-210-8 (Pistol Handle)....................... RS9AS-210-8 (Straight Handle).......................

CARBIDE TIPPED CUTTERS No.RS9A-210-8 Rivet Shaver

PART NO. 800-1 800-2 800-3 800-4 800-5 800-6

BODY. DIA 5/16 3/8 7/16 1/2 9/16 5/8

AUTHORIZED AEROSPACE TOOLING & SERVICE CENTER

S UILT REB BLE LA AVAI

Huck Fasteners Alcoa Fastening Systems

MODEL 956 POWER RIG Hydaulic units Output Pressure Pull 8,400 PSI Return 3,500 PSI

HUCK PNEUDRALIC INSTALLATION TOOLS MODEL 200 PNEUDRALIC INSTALLATION TOOL

TOOL SPECIFICATIONS The Model 200 is designed to install fasteners requiring double action or single action installation tooling. It provides a separate lock collar driving function–the double action that drives the lock of blind rivet and blind bolt fasteners

aluminum cylinder is steel sleeved, and to check reliability, factory tested for 2,000 cycles.

Specification Weight: 10.50lbs. (4.80 kg) Air Pressure Required: 90-100 psi (620-690 kPa) Air Consumption 18 CFM (0.009m 3/s) based on 30 fastener installations per minute Hydraulic Fluid: Automatic Transmission Fluid DEXRON II® or equivalent Stroke: 1.19 in (30mm)

The power, speed, and accuracy of the model 200 are obtained through a pneumatic-hydraulic intensifier system powered by 90-100 psi air.

The Model 200 is a production tool that is easy to handle, and requires a minimum of maintenance. The lightweight S UILT REB BLE LA AVAI

Note: This tool must be equipped with a nose assembly designed for the installation of a specific fastener. Nose assemblies must be ordered separately.

Inches – Millimeters

Model

200

MODEL 2025 PNEUDRAULIC INSTALLATION TOOL

TOOL SPECIFICATIONS The Model 2025, with nose assemblies now available, installs the following:

The 2025 tool’s features includes:

Industrial Fasteners 3/16 & 1/4 MAGNA-LOK® 3/16 & 1/4 MAGNA-BULB® 3/16 & 1/4 MAGNA-GRIP® 3/16 & 1/4 C6L®

• Designed to install – 08 Steel MG Fasteners @ 80 PSI

Aerospace Fasteners 3/16 & 1/4 MS90353/90354 Blind Bolt 3/16 & 1/4 MS21140/21141 Blind Bolts 1/4 NAS 1919/1921 Blind Rivets

• 360º swivel air inlet connection

The tool has features enabling it to install fasteners at high rates with minimum operator fatigue.

Note: This tool must be equipped with a nose assembly designed for the installation of a specific fastener. Nose assemblies must be ordered separately.

• In-line piston for one stroke installations

• Less than 5.8 lbs • Ergonomically designed handle • Noise level 75 DBA@ 90 PSI Specifications Length (2025)

8.36 in.

Width

1.81 in.

212.34 mm 45.97 mm

Height

12.53 in.

318.26 mm

Center to edge

.906 in.

23.01 mm

Weight

5.75 lbs

2.6 kg

Stroke

0.675 (nom.)

17.14 mm (nom.)

Pull capacity

5290 lbs. @ 90 psi.

Model

2025

MODEL 206-375 HYDRAULIC INSTALLATION TOOL

TOOL SPECIFICATIONS 1.75

Models 206-375 and A206-375 are lightweight mini-tools that are easy to use and convenient for installing fasteners in limited clearance areas. Model 206-375 is a single action tool with only one moving part, which keeps maintenance to a minimum, and is designed to install Huck Blind Bolt Fasteners and HUCKBOLT® fasteners. Each Model 206-375 is a cylinder and piston assembly with one unloading value to relive hydraulic pressure at both ends of the stroke.

The design includes an offset piston for added tool clearance. A stop for anvil holder permits nose rotation to 80º. Model 206-375 is equipped with a 12-foot hydraulic hose and electric control cord. The Model A206-375 with an air trigger for use with the 956 POWERIG® Hydraulic Unit. Control tubing (pneumatic) with quick connects are provided for attachment to a POWERIG® Hydraulic Unit.

Specification

2.03 52

Weight: 3.37 lbs (1.50 kg)

.625 2.31

Pull Pressure (max): 5,400-5,700 psi (37,250-39,300 kPa)

Return Pressure (max): 2,200-2,400 psi (15,200-16,000 kPa) Stroke: Standard .375 in (9.52 mm) Optional: Tool stroke can be increased to .50 in (12.7 mm) by removal of stroke limitor. See instruction manual.

Note: This tool must be equipped with a nose assembly designed for the installation of a specific fastener. Nose assemblies must be ordered separately.

Inches – Millimeters

Model

206-375

HUCK PNEUDRALIC INSTALLATION TOOLS MODEL 245 PNEUDRAULIC INSTALLATION TOOL

TOOL SPECIFICATIONS

MODEL 350 PNEUMATIC

Inches – Millimeters

Model

245

Inches – Millimeters

Model

350

Inches – Millimeters

Model

352

INSTALLATION TOOL

TOOL SPECIFICATIONS

S UILT REB BLE A L AVAI

MODEL 352 PNEUMATIC INSTALLATION TOOL

TOOL SPECIFICATIONS

S UILT REB BLE LA AVAI

DOUBLE ACTION BLIND BOLT FASTENERS Includes part numbers:

MODEL 200

3/16 diameter

5/32 diameter

ALUMINUM DOUBLE ACTION BLIND BOLT FASTENERS MODEL 200 Includes part numbers:

MODEL 350

MODEL 136

UNIMATIC® SINGLE ACTION BLIND BOLT FASTENERS Includes part numbers:

NAS 1919B( )S NAS 1919M( )S NAS 1919C( )S OSMLSP( ) SMLSP-BT

NAS 1921B( )S NAS 1921M( )S NAS 1921C( )S OSMLS100( ) SMLS100-BT

the Unimatic Blind Rivet fastener provides uniform bulbed head configuration regardless of fasteners diameter or material, and ensures joint integrity and enhanced fatigue life. Use Unimatic Blind Rivet fasteners in general design applications, in thin sheet stackups, thin blind side sheet, or thick stackups Integrity an performance mean the Unimatic lock collar is trusted by designers even in most demanding FOD critical applications such as high performance aircraft.

Model 244 Type: Pneudralic Applications: High-speed production Features: Lightweight tool for fast, uniform installations. Optimum stroke for one cycle installation of fasteners to 1/4 diameter, heavy duty for years of dependable service. Minimum moving parts.

Model 245 Type: Pneudralic Applications: High-speed production Features: Optimum stroke for one cycle installation of fasteners to 3/8 diameter, heavy duty for years of dependable service. Minimum moving parts.

Model 2012 Type: Pneudralic Applications: Medium production Features: Lightweight tool for fast, uniform installations.

Model 206-375/A206-375 Type: Hydraulic Applications: Limited Clearance

The Unimatic Blind Rivet fastener in flush and protruding head styles

Nose Assemblies 1/8 5/32 99-2724 99-2730 99-2725 99-2731 99-2726 99-2732

3/16 99-2736 99-2737 99-2738

1/4 99-2742 99-2743 99-2744

Nose Assemblies 1/8 5/32 99-27251 99-27311 99-15163 99-15172 2 99-1715 99-17162 2 99-1715-1 99-1716-12

3/16 99-27371 99-15183 99-17172 99-1717-12

1/4 99-27431 99-1311 99-15193 99-17182 99-1718-12

Nose Assemblies 1/8 5/32 99-2724 99-2730 99-2725 99-2731 99-2726 99-2732

3/16 99-2736 99-2737 99-2738

1/4 99-2742 99-2743 99-2744

Nose Assemblies 1/8 5/32 3/16 1/4 99-1715 99-1716 99-1717 99-1718 99-1715-1 99-1716-1 99-1717-1 99-1718-1

Features: Uses offset nose assembly for added clearance, and only one moving part for minimum maintenance. Hoses can be repositioned 1

Requires adapter part number 102463 Requires adapter part number 119400 and stroke limiter part number 18362 3 Requires adapter part number 117831 and stroke limiter part number 118362 2

Model HK150-S456 / D100C–SPEC* Type: Manual Applications: Field repairs Features: Lightweight and easy to handle. Supplied as a complete kit including nose assemblies and driving anvils. NOTE: The Model HK150 includes the S456 nose assembly, adapter part number 122587 and inserts for 1/8, 5/32, and 3/16” fasteners.

Nose Assemblies 1/8 5/32 99-S456 with 99-S456 with 111455 insert 111456 insert

(*) Not a Huck Product

5/32 99-S456 with 111457 insert

SHEAR PULL-TYPE HUCKBOLT® FASTENERS Includes part numbers:

NAS 1446 - 1452 NAS 7034 – 7042 NAS 7014 – 7022 NAS 2406V – 2412V

NAS 1436 - 1442 NAS 7024 - 7032 NAS 7004 – 7012 NAS 2506V – 2512V

Shear pull-type lock-bolt fasteners, flush and protruding heads

There is a wide variety of collar configurations and materials not shown. The tooling shown in this section will install all NAS Shear pull-type lockbolts. Note: These fasteners are available in stump type (without pintail) and are intended for hammer drive installation or automated installation. Contact Huck Installation equipment Division for information on hammer driving and tooling requirements.

Collar for shear lockbolt fasteners

Model 246 Type: Pneudralic Applications: High-speed production Features: Optimum stroke for one cycle installation of fasteners to 3/8 diameter, heavy duty for years of dependable service. Minimum moving parts.

Model 352 Type: Pneudralic Applications: High-speed production Features: Narrow centerline-to-edge measurement allows installations in limited clearance applications

Nose Assemblies 1/8 5/32 99-2651 99-2548S 99-2549S 99-2550S

3/16 99-2554 99-2555 99-2556

1/4 99-2560 99-2561 99-2562

5/16

Nose Assemblies 5/32 3/16 99-2551S 99-2557 99-2552S 99-2558 99-2553S 99-2558 99-1703 2 99-1704 2 99-1703-1 2 99-1704-1 2

1/4 99-2563 99-2564 99-2565 99-17052 99-1705-1 2

5/16 99-2566 99-2567 99-2567 99-1720 4 99-1720-1 4

3/8 99-2569 1 99-2570 1 99-2571 1

Nose Assemblies 5/32 3/16 99-2551S 99-2557 99-2552S 99-2558 99-2553S 99-2558

1/4 99-2563 99-2564 99-2565

5/16 99-2566 99-2567 99-2568

3/8 99-2569 99-2570 99-2571

Nose Assemblies 1/8 5/32 99-614 99-2548S 99-2549S 99-2550S

3/16 99-2554 99-2555 99-2556

1/4 99-2560 1 99-2561 1 99-2562 1

5/16

5/16 99-2566 99-2567 99-2568

3/8 99-2569 1 99-2570 1 99-2571 1

Model 2503/A2503 Type: Hydraulic Applications: High-speed production Features: Small, lightweight, with just one moving part for increased reliability, and an offset piston for limited clearance. Archives the longest stroke available in this series of tooling

“E” (Aluminum) material fasteners only

Nose Assemblies 5/32 3/16 99-2551S 99-2557 99-2552S 99-2558 99-2553S 99-2559

1/4 99-2563 99-2564 99-2565

NOTE: Nose assemblies shown in italic are available in chisel design–tapered flats for improved centerline to edge clearence. Specify by adding CH to part number, for example: 99-254TCH 1 Aluminum material only 2 Requires adapter part number 119400 and stroke limiter part number 118362 3 Requires adapter part number 117831 and stroke limiter part number 118362 4 Requires adapter part number 122134

TENSION PULL-TYPE HUCKBOLT® FASTENERS Includes part numbers:

NAS 1465 - 1472 NAS 1525 - 1532 NAS 6965 - 6972 NAS 2005V - 2012V NAS 6935 - 6942 NAS 2125 - 2132 NAS 1475 - 1482

NAS 1456 - 1462 NAS 1535 - 1542 NAS 1516 - 1522 NAS 6955 - 6962 NAS 6946 - 6952 NAS 2115V - 2122V NAS 2105V - 2112V

Designed for use in high-strength aerospace applications, the Huckbolt Fasteners is readily adaptable to high volume production methods. Common applications include primary airframes, main spars, and engine mounts. There is a wide variety of collar configurations and materials not shown. The tooling shown in this section will install all NAS Tension pull-type lockbolts. Note: These fasteners are available in Stump Type (without pintail) and are intended for hammer drive installation or automated installation.

Collar for tension lockbolt fasteners

Model 244 Type: Pneudralic Applications: Medium production Features: Lightweight tool for fast, uniform installations.

Tension pull-type lock-bolt fasteners, flush and protruding heads

Nose Assemblies 5/32 3/16 99-2548T 99-2554 2 99-2549T 99-2555 2 99-2550T 99-2556 2

NOTE: Nose assemblies shown in italic are available in chisel design–tapered flats for improved centerline to edge clearence. Specify by adding CH to part number, for example: 99-254TCH

3 4 5

1 2

1/4 99-2560 1 99-2561 1 99-2562 1

5/16

3/8

Requires adapter part number 119400 and stroke limiter part number 118362 Requires adapter part number 117831 and stroke limiter part number 118362 Requires adapter part number 122134

“E”(Aluminum material only Will not install DT alloy steel

Nose Assemblies 5/32 3/16 99-2551T 99-2557 99-2552T 99-2558 99-2553T 99-2559 99-1703 2 99-1704 3 99-1703-13 99-1704-1 3 99-1506 4 99-1508 4 99-1507 4 99-15094 99-15284

1/4 99-2563 99-2564 99-2565 99-1705 3 99-1705-13 99-15104 99-15114 99-15304

5/16 99-2566 99-2567 99-2568 99-17204 99-1720-14

3/8 99-2569 1 99-2570 1 99-25711

Nose Assemblies 5/32 3/16 99-2551T 99-2557 99-2552T 99-2558 99-2553T 99-2559

1/4 99-2563 99-2564 99-2565

5/16 99-2566 99-2567 99-2568

3/8 99-2569 1 99-2570 1 99-25711

Nose Assemblies 5/32 3/16 706GP

1/4 708GP

5/16 710GP

3/8 712GP

Nose Assemblies 5/32 3/16 99-2548T 99-2554 3 99-2549T 99-2555 3 99-2550T 99-2556 3

1/4 99-2560 1 99-2561 1 99-2562 1

5/16

3/8

Model 2502/A2502 Type: Hydraulic Applications: High speed production Features: Small, lightweight, with just one moving part for increased reliabilty, and an offset piston for limited clearence.

Model 700/A700 Type: Hydraulic Applications: Limited clearance Features: Built in nose assembly for convenience and dependability, in an extremely small package.

Model 352 Type: Pneudralic Applications: High-speed production Features: Narrow centerline-to-edge measurement allows installations in limited clearance applications

NOTE: Nose assemblies shown in italic are available in chisel design–tapered flats for improved centerline to edge clearence. Specify by adding CH to part number, for example: 99-254TCH 1

Increase hydraulic unit pull pressure to 8400psi “E”(Aluminum material only 3 Will not install DT alloy steel 2

ASP® Fasteners Includes part numbers:

AspFF 2AspFF & FP

2Asp509F & 509P 2AspPF & PP

The Asp fastening system provides a simplified method of fastening composite, soft core, metallic, or other materials which are sensitive to fastener clamp-up or installation force considerations. Clamping force can be infinitely adjusted and then sustained by installation – accommodating the unique requirements of a given structural design. The Asp fastener has a positive mechanical lock for use in vibration and FOD critical installations. It installs quickly and easily eliminating the need for potting, bushings, inserts, or step hole preparation.

Asp fastener showing flush and protruding heads, sleeves, and lock collars

Model 245 Type: Pneudralic Applications: High-speed production Features: Optimum stroke for one cycle installation of fasteners to 5/16 diameter, heavy duty for years of dependable service. Minimum moving parts.

Model 352 Type: Pneudralic Applications: High-speed production Features: Narrow centerline-to-edge measurement allows installations in limited clearance applications

Model 206-375/A206-375 Type: Hydraulic Applications: Limited clearance Features: Uses offset nose assembly for added clearance, and only one moving part for minimum maintenance. Hoses can be repositioned.

Nose Assemblies 13/64 (06) 17/64 (08) 99-2642 99-2645 99-2643 99-2646

21/64 (10) 99-2648 99-2649

Nose Assemblies 13/64(06) 17/64(08) 99-26421 99-26451 99-26431 99-26461 99-1728 2 99-1729 2

21/64(10) 99-26481 99-26491 99-1730 2

Nose Assemblies 13/64 (06) 17/64 (08) 99-2642 99-2645 99-2643 99-2646

21/64 (10) 99-2648 99-2649

Nose Assemblies 13/64 (06) 17/64 (08) 99-1728 99-1729

LONG LENGTH

Long Length

LONG LENGTH

21/64 (10) 99-1730

1 Requires adapter part number 102463 2 Requires adapter part number 119400 and stroke limiter part number 118362

Sleeve Installation Tools Fastener Diameter

Hex Wrench Size Pin Head

Sleeve Driver Part Number

Maximum Installation Torque(1)

13/64” (06) 17/64” (08) 21/64” (10)

5/64” 3/32” 1/8”

106524 106525 107735

20 Inch Pounds 30 Inch Pounds 40 Inch Pounds

(1) Installation torque must be adjusted to determine the controlled clamping force required for the soft core material being fastened. Over-torquing could result in damage to the material and installation sleeve driver.

IRS T REPA EXPER BRANDS L ON AL

BLIND RIVETERS M-4

HI SPEED PNEUMATIC/ HYDRAULIC

304-E AIR / HYDRAULIC RIVETER

M3-V AIR / HYDRAULIC

This heavy-duty air/ hydraulic riveter with its newly designed aluminum forged head can hold up under demanding, continuous use. The M-4 can set rivets from 3/32" thru 1/4" diameters in all alloys. The M-4 is supplied with 3/32. 5/32, and 1/4" standard nosepieces, service tools, swivel inlet air coupler and a mandrel collection bottle. 85-95 PSI: Recommended air pressure Weight: 6.6 lbs

The M3–V is capable of setting blind rivets from 3/32" diameters in alloys up to 3/16". It has an internal vacuum system which allows the mandrel to be held in position while operating the tool at any angle. After setting, the spent mandrel is ejected into a mandrel collection bottle. 85-95 PSI: Recommended air pressure Weight: 4.6 lbs.

Optional Nose Pieces Available For Monobolts #95904...................3/16" #95906...................1/4”

HP-2 / #39000 HAND RIVET TOOL

BIG DADDY

The HP-2 is the largest selling hand rivet tool in the industry. Known and trusted for durability, quality and performance, highstrength aluminum body; drop-forged carbon steel upper handle; and thick, cushionmolded vinyl grips for comfort. The HP-2 sets up to 3/16 steel rivets and comes with four mounted nosepieces (3/32, 1/8, 5/32, and 3/16 inch) and a service wrench. Weight: 1 lb., 3 oz. 1/carton.

#39031

The "Big Daddy" is the most versatile and powerful Marson brand hand riveter, taking the hard work out of setting large diameter blind rivets. The "Big Daddy" features a double-gear reduction system which easily sets from 1/8" to 1/4" diameter Klik-Fast rivets in all alloys. A one-piece collet case eliminates the need to adjust the tool when changing rivet diameters. The unit comes with 5/32, 3/16, and 1/4 inch nosepieces which are stored in the body. Weight: 3.75 lbs

This is Marson's most powerful air/ hydraulic riveter, with its fully enclosed vacuum system that holds the rivet in the nosepiece, allowing the operator to rivet at any angle with one hand free. The vacuum system automatically collects the spent mandrel into a bottle. Nosepieces to install 3/16 and 1/4 inch standard rivets are included. Also included are 3/16" and 1/4" Monobolts nosepieces. 85-95 PSI: Recommended air pressure Weight: 5.5 lbs.

M– 3 PNEUMATIC / HYDRAULIC This heavy-duty air/hydraulic riveter. with its newly designed aluminum forged head can hold up under demanding, continuous use. The M-3 will set blind rivets from 1/8" diameter in all alloys up to 3/16". Included are standard 1/8, 5/32 and 3/16" nosepieces. 85-95 PSI: Recommended air pressure. Weight: 4.2 lbs.

200 KIT™ # 39001 The deluxe hand riveter kit includes HP-2 and 200 assorted Klik-Fast rivets in popular sizes.The molded plastic case houses and protects the tool, rivets and optional countersink double ended drill bit. Weight: 4 lbs. 1/case

IL-1 #39070 PNEUMATIC / HYDRAULIC This durable in-line riveter with its fully adjustable vacuum system holds the rivet in the nosepiece in any riveting position and automatically ejects the mandrel into an attached container (not supplied). The IL-I is capable of setting rivet diameters from 3/32 " thru 3/16" in all alloys and easily hangs from any balancer – an ideal tool for assembly line riveting. 85-95 PSI: Recommended air pressure Weight: 3 lbs.

ECONOMY MODELS PRI PNEUMATIC / AIR RIVETER KIT This economy air riveter is the ideal tool for the shop. Kit comes complete with two adjusting wrenches to install with four assorted nozzles. Contains: Air rivet gun, 3/32, 1/8, 5/32, and 3/16 inch nozzles and two open end wrenches. PR1– 3/16" CAP . . . . . . . . PR2– 1/4" CAP . . . . . . . . 43

RIVET-NUT TOOLS MANDREL / NOSEPIECE CHART For 39200, 34501 and 39202 Thread Size

6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 4mm 5mm 6mm

HEAVY DUTY RIVET-NUTTER #325 RN

RIVET-NUTTER #39200

Mandrel No.

Nosepiece No.

39254 39255 39256 39257 39258 39259 39260 39266 39267 39268

39261 39262 39263 39263 Not Needed Not Needed Not Needed 39274 39273 Not Needed

This quality threaded insert installation tool features patented bearing design, comfortable hand grips and a locking chain. The 39200 installs all sizes of Klik Poly-Nuts and Klik Rivet-Nuts up to 1/4” and 6mm steel. The tool is packaged in a reusable, heavy-duty vinyl pouch containing mandrels and nosepiece to set 8-32, 10-24 and 10-32 inserts. Weight: 1 lb. 3 oz.; 1/case.

Choose the 325RN for installing larger size threaded inserts. This is a heavy-duty tool that will install 10-24 thru 3/8”–16, and 5mm thru 10mm threaded inserts in aluminum or steel. Supplied with 1/4”–20 mandrel and nosepiece only. Weight: 4.25 lbs.

RIVET NUTTER TOTE KIT #34501 Model 34501 Rivet Nutter Tote Kit contains the 39200 thread-setter tool in a molded plastic case; mandrels and nosepieces for 6-32, 8-32, 10-24 sizes, and a mandrel for 1/4-20. The kit also includes 103 assorted Klik Rivet-Nuts and Klik Poly-Nuts, instructions and wrench, all contained in a compartmentalized carrying case. Weight: 2-3/4 lbs.; 1/case. NOTE: COMMERCIAL TYPE RIVNUTS

SPIN PULL RIVNUTER

L845-WRENCH TYPE HEADER for RIVNUTS only (for PLUSNUTS use C-1000 tool) Wrench Type Header for Thread Sizes 4-40, 6-32, 8-32, 10-32, 10-24, 1/4”-20, 1/4”-28. Metric: M3 x 0.5, M4 x 0.7, M5 x 0.8 and M6 x 1.0. Specify size.

Introducing the new Model 150-SP lightweight spinpull tool...A totally different tool for up-setting RivetNuts and “Thread-Serts”. Self-aligning air supply automatically adjusts for pressures. Insert spins on by simply pushing onto mandrel. Rocket trigger upsets insert and spins off. Swivel air inlet for unrestricted, versatile motion. Totally adjustable stroke for all grip ranges. Installs more fasteners per minute with less effort. Works on 80-95 P.S.I. Weighs only 5-3⁄4 lbs. Handles sizes 4-40, 6-32, 8-32, 10-32, 10-24. 1/420, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/213, and 1/2-20. Also available in these metric sizes: 3.5MM, 4MM, 5MM, 6MM, 8MM, 10MM. Kit includes 6-32 thru 3/8-16 mandrels and nosepieces.

PNEUMATIC TYPE CN9P25-(specify size) Cap: 4-40 thru 10-32 CN9P7-(specify size) Cap: 10-24 thru 3/8-16

SIOUX

RIVET-NUT SPEED DRIVER Semi-production high speed tool. Pushpull knob threads rivet-nut on and off. Adjustable anvil for different grip ranges. CONVERSION KITS AVAILABLE 6-32, 8-32, 10-32 #SCA (SPECIFY SIZE) 4-40 #SCA 4-40. . . . . . . .

#150 SP.....

This driver is a quick way to set threaded inserts (thru type only). Other models and sizes available. Specify size: 4-40 thru 3/8-16. CONVERSION ASS'Y AVAILABLE: Specify Size: 4-40 thru 3/8-16

KEYWAY NOTCH CUTTER L3600 – SPECIFY SIZE

#L6000Price . . . . . . . . . . . . .6-32 Thru 10-32 Model (specify the size) L6OOO-4-40 Price . . . . . . . . . . . . . . . . . . . . . .4-40 Model #283-6009 Price . . . . . . . . . . .1/4-28 Heavy Duty Model

• RECOMMENDED FOR SNIPPING KEYWAY NOTCH IN THIN METAL FOR KEYED RIVET NUT FASTENERS • AVAILABLE IN SIZES: #4 thru 1/4”, SPECIFY • ALSO AVAILABLE IN COUNTERSUNK • RECOMMENDED FOR USE ON: 3/32” ALUMINUM 1/16” MILD STEEL • REPAIR PARTS AVAILABLE • 10 LBS.

AIRS EXPERT REP NDS ON ALL BRA

Precision Tools for precise performance

Introducing...

Through next generation ergonomics and the continued focus on productivity and operator safety comes the development of the Sioux Tools Signature Series Drill line. Signature Series Drills are used throughout the military, commercial and private aerospace industry. The powerful five vane motor makes these drills great for drilling applications that contain ferrous and non-ferrous metals, wood and composite materials. The Signature Series Drills offer great value with a 3 planet gear system for increased life and load capacity. The Signature Series Drill has impressive runout of less than .005 inches @2-1/2” from the end of the chuck. The Sioux tools Signature Series Drill line reduces operator fatigue by offering a low sound level and low vibration solution! Operator comfort is achieved through the implementation of a light weight aluminum housing and a comfort grip. Drills are available in both reversing and non-reversing pistol grip and lever handle configurations.

The New signature Series Drills For The Aviation and Aerospace Industry

Model Number

Free Speed rpm

Chuck Capacity in. mm

Pistol Grip Non-Reversing Drills (0.6 HP) SDR6P60N2 6,000 1/4 SDR6P60N3 6,000 3/8 SDR6P40N2 4,000 1/4 SDR6P40N3 4,000 3/8 SDR6P26N2 2,600 1/4 SDR6P26N3 2,600 3/8 SDR6P26N4 2,600 1/2 SDR6P12N3 1,200 3/8 SDR6P7N3 700 3/8 SDR6P7N4 700 1/2 SDR6P4N3 400 3/8 SDR6P4N4 400 1/2 Model Number

Free Speed rpm

6 10 6 10 6 10 13 10 10 13 10 13

Chuck Capacity in. mm

Pistol Grip Non-Reversing Drills (1.0 HP) SDR10P60N2 6,000 1/4 SDR10P60N3 6,000 3/8 SDR10P40N2 4,000 1/4 SDR10P40N3 4,000 3/8 SDR10P26N2 2,600 1/4 SDR10P26N3 2,600 3/8 SDR10P26N4 2,600 1/2 SDR10P12N3 1,200 3/8 SDR10P7N3 700 3/8 SDR10P7N4 700 1/2 SDR10P4N3 400 3/8 SDR10P4N4 400 1/2 ALSO AVAILABLE WITH REVERSE Inline Non-Reversing Drills (1.0 HP) SDR10S60N2 6,000 SDR10S60N3 6,000 SDR10S40N2 4,000 SDR10S40N3 4,000 SDR10S26N2 2,600 SDR10S26N3 2,600 SDR10S12N3 1,200 SDR10S7N3 700 SDR10S4N3 400 SDR10S4N4 400

1/4 3/8 1/4 3/8 1/4 3/8 3/8 3/8 3/8 1/2

ALL BRAND MAJOR S AVAI LABLE

AIR DRILLS

Weight lb. kg

2.10 2.25 2.10 2.25 2.10 2.25 2.70 2.70 2.70 3.10 2.70 3.10

0.95 1.00 0.95 1.00 0.95 1.00 1.20 1.20 1.20 1.40 1.20 1.40

Weight lb. kg

Length in. mm

5.8 6.3 5.8 6.3 5.8 6.3 6.6 7.3 7.3 7.8 7.3 7.8

145 160 145 160 145 160 170 185 185 200 185 200

Length in. mm

Side to Center in. mm

0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

20 20 20 20 20 20 20 20 20 20 20 20

Side to Center in. mm

Air Consumption scfm l/s..

25 25 25 25 25 25 25 25 25 25 25 25

Sound Level dB(A)

11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8

Air Consumption scfm l/s..

80 80 80 80 80 80 80 80 80 80 80 80 Sound Level dB(A)

Spindle Thread

2.30 2.45 2.30 2.45 2.30 2.45 2.90 2.90 2.90 3.30 2.90 3.30

1.05 1.10 1.05 1.10 1.05 1.10 1.30 1.30 1.30 1.50 1.30 1.50

6.5 7.0 6.5 7.0 6.5 7.0 7.5 8.0 8.0 8.5 8.0 8.5

165 180 165 180 165 180 190 205 205 215 205 215

0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

20 20 20 20 20 20 20 20 20 20 20 20

30 30 30 30 30 30 30 30 30 30 30 30

14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2

80 80 80 80 80 80 80 80 80 80 80 80

3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 1/2"-20 3/8"-24 1/2"-20 1/2"-20 1/2"-20 1/2"-20

6 10 6 10 6 10 10 10 10 13

2.20 2.30 2.20 2.30 2.20 2.30 2.75 2.75 2.75 3.20

1.00 1.05 1.00 1.05 1.00 1.05 1.25 1.25 1.25 1.45

7.8 8.3 7.8 8.3 7.8 8.3 9.3 9.3 9.3 9.8

200 210 200 210 200 210 235 235 235 250

0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8

19 19 19 19 19 19 19 19 19 19

30 30 30 30 30 30 30 30 30 30

14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2 14.2

78 78 78 78 78 78 78 78 78 78

3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 1/2"-20 1/2"-20 1/2"-20

1410 2600 1/4” 37/64” 1 lb. 4 oz. .33 6-1/4”

1412 3600 1/4” 37/64” 1 lb. 4 oz. .33 6-1/4”

“ECONOMY” MODEL REVERSIBLE

1B 7BA 33BA 65562

3/8” Cap. 1/4” Cap. 3/8” Cap. 1/2” Cap. 3/8” Cap.

DESOUTTER RPM

KT84228 3/8” CAP

REPLACEMENT CHUCKS WITH KEYS (3/8-24 Thd.) ECONOMY FP5950 JACOBS JACOBS JACOBS (1/2-20) JACOBS KEYLESS

3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 1/2"-20 3/8"-24 1/2"-20 1/2"-20 1/2"-20 1/2"-20

6 10 6 10 6 10 13 10 10 13 10 13

SIOUX “MINI AIR DRILL” MODEL NO. RPM Chuck Cap. Side to Center Weight Horse Power Length

Spindle Thread

2,000 RPM

3 LBS.

1264 1/4” CAP

“ECONOMY” MODEL

“ECONOMY” MODEL KT84229 1/2” CAP

500 RPM

4 LBS.

WEIGHT (lbs.) 2,900 RPM 2 LBS.

KT84218 3/8” CAP

2,200 RPM

2-3/4 LBS.

DOTCO® DRILLS Pistol Grip Drills

DOTCO® 330 – 29,000 RPM 0.4 – 0.9 hp (0.30 – 0.67 kW) ■ Non-reversible ■ Ergonomically critical finger and thumb guides fit the hand to aid in control

14CN

14CS

■ Excellent for aerospace, metal fab and woodworking 14CF Free Speed rpm

Drill Diameter Capacity

lbs.

kgs.

in..

14CF Series – 0.4 hp (0.30 kW) – Non-reversible 14CFS90-38 14CFS91-38 14CFS92-38 14CFS93-38 14CFS94-38 14CFS95-38 14CFS96-38 14CFS97-38

29,000 5,200 3,800 3,200 2,400 1,000 700 600

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

1.5 1.5 1.5 1.5 1.6 1.8 1.8 1.8

0.68 0.68 0.68 0.68 0.72 0.82 0.82 0.82

14CS Series – 0.6 hp (0.45 kW) – Non-reversible 14CSL90-38 14CSL90-40 14CSL98-38 14CSL98-40 14CSL91-38 14CSL91-40 14CSL92-38 14CSL92-40 14CSL95-51 14CSL95-40 14CSL97-51 14CSL97-40

20,000 6,000 5,200 3,200 1,300 500

1/4” 1/4” 1/4” 1/4” 3/8” 3/8”

2.1 2.1 2.1 2.1 2.9 2.9

14CN Series – 0.9 hp (0.67 kW) – Non-reversible 14CNL90-38 14CNL90-40 14CNL98-38 14CNL98-40 14CNL91-51 14CNL91-40 14CNL92-51 14CNL92-40 14CNL95-51 14CNL95-40 14CNL97-53 14CNL97-40

20,000 6,000 5,200 3,200 1,300 500

1/4” 1/4” 3/8” 3/8” 3/8” 1/2”

2.2 2.2 2.4 2.4 2.8 3.5

Model Number With Chuck

Without Chuck

GENERAL: See page ? for additional features and benefits. Air Inlet, 1/4” NPT – Use 5/16” (7.9mm) I.D. hose. Tools performance rated at 90psi (620 kPa) air pressure. STANDARD EQUIPMENT: 14CF: Jacobs geared chuck, chuck key

Geared Chuck Size

Air Inlet Size

5.7 5.7 5.7 5.7 5.7 6.9 6.9 6.9

145 145 145 145 145 175 175 175

3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”

1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

0.95 0.95 0.95 0.95 1.31 1.31

6.3 6.3 6.3 6.3 8.1 8.1

160 160 160 160 205 205

1/4” 1/4” 1/4” 1/4” 3/8” 3/8”

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

1.00 1.00 1.08 1.08 1.27 1.59

6.8 6.8 7.2 7.2 8.6 9.1

173 173 183 183 218 231

1/4” 1/4” 3/8” 3/8” 3/8” 1/2”

1/4” 1/4” 1/4” 1/4” 1/4” 1/4”

Weight**

Length**

14CS, 14CN: Jacobs geared chuck, chuck key, dead handle (All models with a chuck opening greater than 1/2”) EXTRA EQUIPMENT: Overhose:

WARNING: Face & eye protection must be worn while operating power tools, per ANSI B186.1. Cutting tool maximum speed rating must equal or exceed speed of air tool @90psi (620 kPa). Follow cutting tool manufacturer’s mounting & operating instructions. Tools must be equipped with lock-off lever to be CE compliant.

MASTER POWER MINI AIR DRILLS Pistol Grip Drills Non-Reversible Nominal Motor Power 0.4 hp 0.3 kW

Two Stage Throttle Bearing supported output spindle assures minimum run-out

Non-Reversible 360° Rotatable exhaust Low Noise

Chuck Capacity

Spindle Offset In. mm

Max Free RPM

Hp.

MP1451-38••

5200

1/4”

.69

MP1453-38••

3200

1/4”

.69

Model Number

Length

Weight

In.

lbs.

6.3

159

1.5

.68

6.3

159

1.5

.68

General

STANDARD EQUIPMENT

Air Inlet: 1/4” NPT – Use 1/4” (6.4mm) I.D. hose All tools performance rated @ 90 psi (620 kPa) air pressure

Geared chuck, chuck key

CLECO AIR DRILLS NO. 135 VARIABLE SPEED DRILLS

Speed Range: 150 T0 2400 rpm Nominal Motor Power .7 HP

FEATURES: • Calibrated dial on rear of tool simplifies drill speed selection • Choice of three governed speed models to match material being drilled • Powerful air motor produces .7 nominal horsepower • Can be used with Feed Assist for more accurate, perpendicular holes

135 DPV–14B-51

SPECIFICATIONS Model Number * 135 DPV-7B-43 135 DPV-14B-51 135 DPV-28B-51

SPEEDS rpm

CHUCK CAPACITY

FREE

GOVERNED

in.

600 1250 2600

150-550 400-1200 100-2400

3/8 5/16 5/16

Performance rated @ 90 PSIG (6.2 BAR) Air Inlet: 1/4” N.P.T.F. Minimum Hose Size: 5/16” (6mm) Spindle Offset: 25/32” (20mm)

LENGTH

WEIGHT

(SEE CAPACITY NOTE)

mm 10 8 8

in.

lb.

Kg.

9 5/8 9 1/4 8 1/2

244 235 216

3-5/8 3-3/8 3-1/8

1.6 1.5 1.4

STANDARD EQUIPMENT * Available with 3/8” or 1/2” chuck. 3-JAW CHUCK AND KEY. OPERATING INSTRUCTIONS AND SERVICE MANUAL CAPACITY CAUTION NOTE: 135DPV DRILLS MUST BE EQUIPPED WITH DEAD HANDLE (861006) IF 1/2 IN. (13MM) CAPACITY CHUCK IS SPECIFIED.

PORTABLE DRILL BUSHING ASSEMBLY

1/2–13 THD. 1-1/2 DIA.

HOUSING SLIP BUSHINGS

1-3/4 DIA. 589DA = .312 I.D. LINER DRILL RANGE #80-#10 589EA = .500 I.D. LINER DRILL RANGE #28-11/32

.4998 DIA DA-BUSHING 1/2” LONG EA-BUSHING 3/4” LONG USE STANDARD SLIP RENEWABLE DRILL

*AVAILABLE EITHER ‘DA’ OR ‘EA’ STYLE BUSHING

6” 3/4” .212”

6” 1”

.290” 7-1/8”

2-7/16”

.425” 7-1/8” 1-3/8”

.384”

6-1/2”

1-1/16” .290 1”

1-3/16”

7-1/2”

THE ORIGINAL ®

DRILLING ATTACHMENT

TERRY NO. N 6 – Straight Flexible (Snake) Drilling Attachment with 1/4” – 28 threaded spindle 30”

TERRY NO. N 51-1 – Right Angle Flexible Drilling Attachment. (1/4”-28 THD)

15/16 22”

TERRY NO. N 63 – Right Angle Flexible Drilling Attachment. A combination of the No. 3 Right Angle Head Assembly from the Terry No. 3 (1/4”-28 THD) 30”

TERRY # T-21 AND # T-23 THIN HEAD OFFSET DRILLING ATTACHMENT

Designed for drilling in narrow channels, Terry #T-21 and the heavier #T-23 are ideal for many difficult drilling jobs. Capacity #T-21 1/8” #T-23 1/4”

DIMENSIONS # T-21 1/4” 7/8” 1-1/2” 3/4” 1/2” 5-5/8” 1/4” 10-32 or 1/4-28

TERRY NO. T 235 – Flat Offset Drilling Attachment (Short Handle) with 1/4”-28 threaded spindle. The 2-5/16” offset gives greater access to tight places. Needle Bearings in the Handle, Hardened Alloy Steel Drive Shaft and Gears make this a most durable tool.

TERRY NO. T-25 – Flat Offset Drilling Attachment (Long Handle) with 1/4”-28 threaded spindle. Same as T 25 above, but with long handle. 6-5/8” DIMENSIONS A – 2-5/16” B – 3-3/16” C – 7/16” D – 11/16” E – 1/4” F – 7/8” G – 1/4” - 28 thread

Capacity – 1/4” maximum

A B C D E F G H

#T-23 7/16” 1” 2-3/16” 1-5/32” 3/4” 6-1/2” 1/4” 10-32 or 1/4-28

Aircraft Specialty Tools-Angle Drills

1AM1541-450

1AM1551-900

2L1380 No. 2S1310

Non-Reversible

No. 60-032 Flathead Drill (NOT A Sioux Tool)

R.P.M. No. Load 2800 5800 2800 5800 2800 3350 2200 3500

H.P. .33 .75 .33 .75 .33 .75 .50 .50

Cat. No. 1AM1541-45o 2A1410-45o 1AM1551-90o 2A1410-AH 60-032 2L1380 2S1310 2S1410

Side To Center Inches 21/64 21/64 21/64 21/64 7/16 -29/32 29/32

Spindle Thread (Female) 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 ConeJaw 1/4 Chuck 1/4 Chuck

Hose Conn. 1/4” 1/4” 1/4” 1/4” 1/8” 1/4” 1/4” 1/4”

Min. Hose Size 1/4” 3/8” 1/4” 3/8” 1/4” 3/8” 1/4” 1/4”

Overall Length Ins. 10.2 11-15/16 9.7 11-7/16 10-5/8 13-3/4 3-9/16 3-9/16

Net. Wt. Tool Only Lbs. Oz. 1.8 2.7 1.5 2.7 1.10 2.3 2.10 2.10 51

DOTCO® ERGONOMIC RIGHT ANGLE DRILLS

Model #: 15LF281-62

-62

1/4”-28 Internal Thread

4 1/8” 5/8”

5/8”

4 1/8”

15/16”

1 1/8”

5/8”

8” 5/

3 7/16”

4 1/8”

4 1/2”

†– Collet Model SEE PAGE 53 FOR COLLETS

5/8”

ANGLE DRILLS AND ACCESSORIES HIGH SPEED STEEL THREADED SHANK ADAPTER DRILLS

CONE-JAW CHUCK

1/4-28 THD. SERIES 2962 1/4-28 THD. SHK. 1-1/4" O.A.L.

#M3. . . . . . . . . . . . . . . . . . . . . . . .

SIZE 1/4 10 11 12 16 19 20 21 27 29 30 40

STUB AN LON D LENG G AVAIL THS ABLE

COBA AVAIL LT ABLE

SERIES 2972 1/4-28 THD. SHK. 2-1/4" O.A.L.

BROKEN DRILL COLLETS (CAN'T SLIP – NO BRAZING)

COLLETS This type of collet is slotted with internal prongs that grip on flute of drill.

200-SPECIFY #40,30,21,10 300-1/4. . . . .

COLLETS FOR ATLAS, COPCO, LBV 25 (–91) and LBV 36 (-91) & DESOUTTER: D314, D315, D374 mm 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8

in.

(3/32)

(1/8)

part no. 18922 18932 18942 18952 18962 18972 18982 18992 19002 19022 19032 19042

mm 4.0 4.2 4.4 4.6 4.8 5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4

in. (5/32)

(3/16)

(1/4)

ADAPTER 200-1/4"-28 300-1/4-28. . . . .

DRILL COLLETS 1/4-28 THREADED SHANK

part no. 19052 19062 19072 19082 19092 19102 19122 19132 19142 19152 19162 19172 19182

LONG REACH RIGHT ANGLE DRILL 127590. . . . . . . . . .

Accepts 1/4"-28 Threaded Drill Bits 2800 RPM

FP 787A 3/8 CAP.

13 1/2” (323.8mm)

1 5/16”

31/32”

(33.4mm)

(24.61mm)

5/16” (7.94mm)

Reversible .......... 1800 RPM 2 lbs.

7 3/8” (187 .3mm)

DESOUTTER® ANGLE DRILLS Compact 90º Angle Head 0.12 to 0.38 kW (0.16 to 0.50 hp) -580 to 5200 rpm

D32-LInterchangeable Level Included

PIC REF

D32-S-

MODEL

PART NUMBER

FREE SPEED rpm

MOTOR POWER

Weight

AIR FLOW

cfm

*COLLET SPINDLE – 5mm (3/16”) CAPACITY Lever Start

D32-L-5200C D32-L-2800C D32-LX-1800C

205 146 651 4 1460764 1458224

5200 2800 1800

0.28 0.28 0.12

0.38 0.38 0.16

0.72 0.72 0.72

1.6 1.6 1.6

9.4 9.4 5.0

19.9 19.9 10.6

D32-S-5200 D32-S-4000 D32-S-2800

1465344 1465354 1465364

5200 4000 2800

0.28 0.28 0.28

0.38 0.38 0.38

0.72 0.72 0.72

1.6 1.6 1.6

9.4 9.4 9.4

19.9 19.9 19.9

0.28 0.12

0.38 0.16

0.72 0.72

1.6 1.6

9.4 5.0

19.9 10.6

Button Start

1/4” X 28 SPINDLE – 5mm (3/16”) CAPACITY Lever Start

D32-L-2800S D32-LX-1800S

1460754 1458204

2800 1800

Standard 45 Angle Head 0.28 kW (0.38 hp) – 400 to 4400 rpm

D315-L *COLLET SPINDLE – 6.4mm (1/4”) CAPACITY

*See Page 53 for Collets

Button Start

Lever Start

D315-S-2800 D315-S-1750 D315-S-1050

1381464 1382014 1382434

2800 1750 1050

0.28 0.28 0.28

0.38 0.38 0.38

0.79 0.79 0.90

1.7 1.7 2.0

269 291 291

10.59 11.46 11.46

9.4 9.4 9.4

19.9 19.9 19.9

D315-L-4400 D315-L-2800 D315-L-1750

1462134 1381544 1382194

4400 2800 1750

0.28 0.28 0.28

0.38 0.38 0.38

0.79 0.79 0.90

1.7 1.7 2.0

269 269 291

10.59 10.59 11.46

9.4 9.4 9.4

19.9 19.9 19.9

0.28 0.28 0.28 0.28 0.28

0.38 0.38 0.38 0.38 0.38

0.79 0.79 0.90 0.90 0.90

1.7 1.7 2.0 2.0 2.0

269 269 291 291 291

10.59 10.59 11.46 11.46 11.46

9.4 9.4 9.4 9.4 9.4

19.9 19.9 19.9 19.9 19.9

1/4” x 28 Spindle – 6.4mm (1/4”) CAPACITY Lever Start

D315-L-4400S D315-L-2800S D315-L-1750S D315-L-1050S D315-L-400S

1456934 1456944 1456954 1456964 1456974

4400 2800 1750 1050 400

DESOUTTER® ANGLE DRILLS Compact 30º and 90º x Angle Head (360º) 0.12 - 0.28 kW (0.16-0.38hp) – 2000 to 5700 rpm

D33–S–

Interchangeable lever included

D370–L–

PIC REF

MODEL

PART NUMBER

FREE SPEED

MOTOR POWER

rpm

Weight

AIR FLOW

cfm

*COLLET SPINDLE – 5mm (3/16”) CAPACITY - 30º Button Start

A A A A

D33-SX-2000 D33-S-5700 D33-S-4400 D33-S-2800

1379204 1465374 1465384 1465394

2000 5700 4400 2800

0.12 0.28 0.28 0.28

0.16 0.38 0.38 0.38

0.62 0.62 0.62 0.62

1.4 1.4 1.4 1.4

5.0 9.4 9.4 9.4

10.6 19.9 19.9 19.9

D33-LX-2000 D33-L-3000

1379384 1464764

2000 3000

0.12 0.28

0.16 0.38

0.62 0.62

1.4 1.4

5.0 9.4

19.9 19.9

0.16 0.38

0.62 0.62

1.4 1.4

5.0 9.4

10.6 19.9

Lever Start

B B

1/4” X 28 SPINDLE – 5mm (3/16”) CAPACITY - 30º Lever Start

B B

D33-LX-2000S D33-L-3000S

1464834 1464824

2000 3000

0.12 0.28

*COLLET SPINDLE – 5mm (3/16”) CAPACITY - 360º Button Start

D370-SX-2000

1379464

2000

0.12

0.16

0.72

1.6

5.0

10.6

D370-LX-2000 D370-L-3000

1379544 1464794

2000 3000

0.12 0.28

0.16 0.38

0.72 0.72

1.6 1.6

5.0 9.4

10.6 19.9

0.16 0.38

0.72 0.72

1.6 1.6

5.0 9.4

Lever Start

D D

1/4” X 28 SPINDLE – 5mm (3/16”) CAPACITY - 360º Lever Start

D D

D370-LX-2000S D370-L-3000S

1464804 1464814

2000 3000

0.12 0.28

10.6 19.9

*See Page 53 for Collets

AIRCRAFT DRILL BITS (HIGH SPEED STEEL) PER NAS907 SPECIFICATIONS SCREW MACHINE (“SHORTIE”) 135° S/P

JOBBERS LENGTH 118° S/P R18A

R10A

R41C

R40C

#5 #10 #16 #20 #21 #27 #30 #40

1/16 3/32 1/8 5/32 3/16 1/4 5/16 3/8

#5 #10 #16 #20 #21 #27 #30 #40

1/16 3/32 1/8 5/32 3/16 1/4 5/16 3/8

6” AIRCRAFT EXTENSION

12” AIRCRAFT EXTENSION 135° S/P

135° S/P

501-6

500-6

501-12

500-12

#5 #10 #16 #20 #21 #27 #30 #40

1/16 3/32 1/8 5/32 3/16 1/4 5/16 3/8

#5 #10 #16 #20 #21 #27 #30 #40

1/16 3/32 1/8 5/32 3/16 1/4 5/16 3/8

STANDARD PACK = 12 PIECES WE OFFER PILOTED DRILLS AND REAMERS TO SPECIFICATION

UNI1 UNI2 UNI3 UNI4 UNI20 UNI21

#10231 Step Drill, 13 Hole Sizes: 1/8” to 1/2” #10232 Step Drill, 6 Hole Sizes: 3/16” to 1/2” #10233 Step Drill, 9 Hole Sizes: 1/4” to 3/4” #10234 Step Drill, 12 Hole Sizes: 3/16” to 7/8” #10220 Step Drill, 8 Hole Sizes: 9/16” to 1” #10221 Step Drill, 10 Hole Sizes: 13/16” to 1-3/8” UNI502 #10502 Step Drill, 3 pcs., Hole Sizes: #1, #2, and #3

DRILL SETS JOBBERS LENGTH DRILL SET High Speed Steel, Surface Treated* R10 Fractional Sizes C162-HB 29Pc. Set in Metal Index 1/16-1/2” by 64ths

C163-HB 15Pc. Set in Metal Index 1/16-1/2” by 32ths

JOBBERS LENGTH DRILL SET

High Speed Steel, Surface Treated* R18 Wire Sizes

High Speed Steel, Surface Treated* R15 Letter Sizes

C1-HB 60 Pc. Set in Metal Index 1-60

C61-HB 20 Pc. Set in Metal Index 61-80

CAZ-HB 26Pc. Set in Metal Index A-Z

AIRCRAFT DRILL BITS

(COBALT) PER NAS907 SPECIFICATIONS TYPE “J”

Standard Pak = 12 pieces

DRILL STOPS

PILOT BRUSHES STAINLESS

PILOT DIA.

06721 06741 06761 06781 06801

3/32 1/8 5/32 3/16 1/4

BRUSH WIRE DIA. SIZE 1/2 1/2 1/2 1/2 1/2

.004 .004 .004 .004 .004

TRIM LENGTH FROM RING 1/8 1/8 1/8 1/8 1/8

BODY DIAMETER 5/8”

Stem Diameter-1/4” Max. Safe Speed 8,000 R.P.M

Ch am fer Bo tto min g

Plu gC ham fer

Tap er C ham fer

TAP SETS Each Set Contains Three Taps:

EXPLANATION OF DESCRIPTION SIZE

THREAD

NO. FLUTES

Numbered Sizes and Fractional Sizes as Shown

Number of threads per inch

3 4

TYPE FLUTES Symbol Explanation FL

Str. Flute

PITCH DIA. LIMIT NO. H2 H3

THE HANSON-WHITNEY COMPANY High Speed Steel… Ground Thread MADE IN USA

ORDER BY SET NUMBERS OR INDIVIDUAL TAP NUMBER

TAPPERS

* * * *

RAPID REVERSE CAPACITY OF 1/4” IN STEEL, 5/16” IN ALUMINUM TP9A-4C20 CAPACITY No. 10-5/16” THREAD SIZE TP9A-4C32 CAPACITY 1/4” – 1/2” THREAD SIZE TP9-A-4C20

Handle Pistol 58

Rev.

R.P.M. No Load

Catalog Number

Sides To Center Inches

Torque In Lbs.

Hose Conn.

Min. Hose Size

Overall Length Inches

Net Weight Tool Only Lbs. Ozs.

400

TP9A-4C20

29/32

310

1/4” PT

1/4”

8-1/4

2.15

400

TP9A-4C32

29/32

310

1/4” PT

1/4”

8-1/2

3.00

SCREW EXTRACTORS High Speed Steel, Screw Extractor

SCREW EXTRACTORS No. 1 2 3 4 5 6 7 8 9 10 11 12

Bolt Size 3/16 – 1/4 1/4 – 5/16 5/16 –7/16 7/16 – 9/16 9/16 – 3/4 3/4 –1 1–1-3/8 1-3/8 –1-3/4 1-3/4–2-1/8 2-1/8 –2-1/2 2-1/2–3 3–3-1/2

Small End 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 1-27/32

Large End 1/8 13/64 1/4 11/32 7/16 19/32 25/32 1-1/32 1-9/32 1-9/16 1-7/8 2-5/16

Flute Lgth 1/2 7/8 1 1-1/4 1-1/2 1-3/4 2-1/4 2-1/4 2-1/4 2-1/2 3 3-1/2

Drill Size

O.A.L

Part Number

5/ 64 7/ 64 5/ 32 1/4 17/ 64 13/32 17/32 13/16 1-1/16 1-5/16 1-9/16 1-15/16

2 2-3/8 2-11/16 3 3-3/8 3-3/4 4-1/8 4-3/8 4-5/8 5 5-5/8 6-1/4

EZ1 EZ2 EZ3 EZ4 EZ5 EZ6 EZ7 EZ8 EZ9 EZ10 EZ11 EZ12

“Easy Outs” SPIRAL FLUTE SCREW EXTRACTOR SET 20 PK. 5 Pc. Set in Plastic Pouch #1, 2, 3, 4, 5

SCREW EXTRACTOR SET 45 PK. 6 Pc. Set in Plastic Pouch #1, 2, 3, 4, 5, 6

H.S.S. CHUCKING REAMERS SERIES 740 – Right Hand Spiral Flute SERIES 720 – Left Hand Spiral Flute SERIES 700 – Straight Flute SERIES 700C – Straight Flute Cobalt Special Piloted (STEP) Reamers Available Per Your Spec. HSS OR CARBIDE

AIRCRAFT TAPER ROUTER

High Speed Steel R.H. Helix, R.H. Cut. Taper 1/4” Per Foot Taper routers are used for cutting, trimming and routing around cowling, door sills and plexi-glass, trimming on wing terminals on bulkheads and ribs on fuselage. The advantages over taper pin reamers and drills are the ability to cut without drilling first, easier guiding along the pattern and freer cutting without buildup.

Nominal Diameter At Part No. ATR1 ATR2 ATR3 ATR4

Size No. 1 2 3 4

Shank Diam. Inches

Small End Inches

Large End Inches

Flute Length Inches

Overall Length Inches

.0980 .1280 .1875 .2500

.0810 .1100 .1650 .2240

.0980 .1280 .1875 .2500

13/16 7/8 1-1/16 1-1/4

2 2-1/4 2-1/2 2-3/4

SHEET METAL CLAMPS “CLECOS” KWIK-LOK- TEMPORARY REUSABLE CLAMPS A diversity or plier actuated clamps for precise holding of materials.

The K-type sheet holder clamp is the standard clamp. It is plier-actuated, spring-loaded and steel bodied

PART NO.

KK The KK-type sheet holder clamp is designed for those space requirements which prohibit the use of standard Ktype clamp. The KK-type is a miniature clamp, with a shorter overall body and special effectiveness for more confined areas.

KL / KEL The KL and KEL-type clamps are standard K-type clamps with an extended grip range.

COLOR CODE

KK-3/32 KK-1/8 KK-5/32 KK-3/16

zinc copper black brass

KL-3/32 KL-1/8 KL-5/32 KL-3/16

zinc copper black brass

KEL-3/32 KEL-1/8 KEL-5/32 KEL-3/16

zinc copper black brass

G(grip)

D(diameter)

drill size

0-1/4”

3/32” 1/8” 5/32 3/16”

#40 #30 #20 #10

1/4” – 1/2”

3/32” 1/8” 5/32 3/16”

#40 #30 #20 #10

1/2” – 3/4”

3/32” 1/8” 5/32 3/16”

#40 #30 #20 #10

PNEUMATIC SKIN CLAMP TOOL PNEUMATIC CLECO INSTALLER * Trigger Throttle * Ergonomic Handle * 1/4” NPT Air Inlet * Quiet Operation * 360º Swivel Mount * For use on button type and side grip temporary fasteners * Made in USA

The Pneumatic Cleco Fastener Installation Tool has been developed to eliminate the constant, repetitive motion associated with the common Cleco Plier. It also adds speed and efficiency to the installation of Cleco Fasteners. No. PA20112…

Part No. KSG KSG KSG KSG

1/2”X1/2” 3/4”X1/2” 1/2”X1” 3/4”X1”

Grip

Color Code

0-1/2” 0-3/4” 0-1/2” 0-3/4”

copper brass copper brass

KSG-SIDE GRIPS – edge clamps to hold materials together where no holes are provided. Plier operated. Suggested for bonding, gluing and sealants.

NEW CLECO PLIERS With Protective Hand Grip

Model #K200P

POWER-OPERATED TEMPORARY FASTENERS

POWER FASTENER GUNS

No. SR9A-25 Skin Clamp Runner

No. 2S2300SR Skin Clamp Runner

* Rapid reverse on SR9A-25 Skin Clamp Runner

Description

Handle

Skin Clamp Runner Skin Clamp Runner

Pistol “S” Handle

Rev Rev

R.P.M. No Load

Cat No.

Side To Center Inches

Hose Conn.

Min Hose Size

Overall Length Ins.

Net Wt. Tool Only Lbs. Oz.

2,500 2,500

SR9A-25 2S2300SR

29/32 29/32

1/4” 1/4”

9-1/8 5-11/16

2-9 2-10

NO-MARK FASTENERS SSL SERIES (Standard Length)

SEL SERIES (Extra Long)

Plastic Base Cap Special Design for Composites

Plastic Base Cap No Pliers Required Suitable For Composite Structures Wing Nut Free Wheeling Hand Fastener

To be used on heavier materials for extra pressure. Available in various sizes and different grip ranges. SIZE

PART NO

GRIP

KWN-FW KWNL-FW

0” to 1/2” 0” to 1”

KWNEL-FW

1/2” to1-1/2”

3/32

1/18

5/32

3/16

1/4

7/32, 5/16

NOTE: QUANTITY DISCOUNT ABOVE 100 PIECES

TOGGLE CLAMPS Model Number FC 50 FC 51 FC 53 FC 54

HANDY CLAMPS

SPRING CLAMPS

“C” CLAMPS/BODY CLAMPS

With

Spindle Swivel Thread Size Without Spindle 1/4-20 • •

• •

5/16-18 3/8-16 3/8-16

Length 4-1/2”

(A) Reach 1-1/8

(B) Gap 1

Holding Pressure 200

6” 8-1/2” 8-1/2”

1-3/4 2-3/4 2-3/4

1-1/4 1-3/4 3

350 700 700

SPRING TENSION CLAMPS

MECHANICS VISES

CLECO® 14 SERIES INLINE SCREWDRIVERS Plus, all new inline models have all the performanceproven features and benefits of our original Cleco 14 Inline Series. Proven Clecomatic® clutch for greater repeatability Soft oval-shaped housing for a more comfortable grip High power-to-weight ratios for reduced cycle times Rear overhose option for lower noise levels Composite housing for better feel and less vibration Interchangeable clutch assembly and planetary gears for greater adaptability Hidden, but easy-to-use access, torque Model Number adjustment for reduced online 1/4” QC tampering Multiple handle configurations for 14BPA02Q maximum operator comfort 14BPA03Q 14BPA04Q Wide variety of accessories 14BPA05Q for application flexibility 14BPA06Q

* *

THE NEWEST CLECO 14 SERIES INLINE SCREWDRIVERS NOW WITH PUSH-BUTTON REVERSE. Fingertip touch activates / controls reverse action, resulting in higher productivity levels. Push-button reverse positioned for more “natural” handling

Screw Size Gr. 5 Gr.9.8

Free Speed

in.

RPM

#6 #8 #10 #10 #10

M3.5 M3.5 M4 M4 M4

2300 1600 920 560 220

Screw Size: M2.5 – M4 #4 – #10

Model Number 1/4” Quick Change

Bit & Finder*

4 4 3 2 2

Length

14 19 33 45 45

.5 .5 .3 .2 .2

1.6 2.1 3.7 5.1 5.1

Weight

in.

9.05 9.25 9.05 9.45 9.45

230 235 230 240 240

lbs.

1.4 1.4 1.3 1.5 1.5

0.63 0.64 0.61 0.67 0.68

Push button and sliding knob reverse Push-to-start and Push & Lever Start External torque adjustment Bit & finder and quick change chuck

2, 14 Series Torque Range: .06 – 5.1 Nm 0.5 – 45 In. Lbs

Torque Range in-lbs

Screw Size Gr. 5 Gr.9.8 in. mm

Free Speed

Length

Torque Range

in-lbs

RPM

Weight

in.

lbs.

.9 - .06 .9 - .06

7.60 6.40

194 162

0.5 0.5

0.20 0.20

Push-to-Start - Push Button Reverse – Clecomatic Clutch 2RSA-10B 2RSA-10SB**

#4 #4

M2.5 M2.5

1000 1000

8 - .5 8 - .5

Push-to-Start - Reversible – Clecomatic Clutch 14SPA02Q 14SPA03Q 14SPA04Q 14SPA05Q 14SPA06Q

14SPA02B 14SPA03B 14SPA04B 14SPA05B 14SPA06B

#6 #8 #10 #10 #10

M3.5 M3.5 M4 M4 M4

2800 1900 1100 660 260

4 4 3 2 2

19 26 40 45 45

.5 - 2.1 .5 - 2.9 .4 - 4.5 2 - 5.1 2 - 5.1

9.05 9.25 9.05 9.45 9.45

230 235 230 240 240

1.4 1.4 1.3 1.5 1.5

0.63 0.64 0.61 0.67 0.68

4 4 3 2 2

19 26 40 45 45

.5 - 2.1 .5 - 2.9 .4 - 4.5 2 - 5.1 2 - 5.1

9.80 249 10.00 254 9.80 249 10.20 259 10.20 259

1.5 1.5 1.5 1.6 1.6

0.69 0.70 0.66 0.73 0.74

Lever Push-to-Start - Reversible – Clecomatic Clutch 14SCA02Q 14SCA03Q 14SCA04Q 14SCA05Q 14SCA06Q

Torque Range: .02 – 5.1 Nm 2.0 – 130 In. Lbs Screw Size: M3.5 – M6

1/4” Quick Change

Bit & Finder*

#6 #8 #10 #10 #10

M3.5 M3.5 M4 M4 M4

2800 1900 1100 660 260

PISTOL GRIP SCREWDRIVERS

14 Series

Model Number

14SCA02B 14SCA03B 14SCA04B 14SCA05B 14SCA06B

Sliding knob reverse External torque adjustment Quick change drive

Screw Size Gr. 5 Gr.9.8 in. mm

Free Speed

Length

Torque Range

in-lbs

2800 1900 1100 660 260

4 4 3 2 2

19 26 40 45 45

0.5 0.5 0.3 0.2 0.2

2800 1900 1100 660 260 660 400 250

4 - 19 4 - 26 3 - 40 2 - 45 2 - 45 21 - 60 30 - 87 35 - 130

0.5 0.5 0.3 0.2 0.2 2.4 3.4 4.0

RPM

Weight

in.

lbs.

2.1 2.9 4.5 5.1 5.1

8.2 8.4 8.2 8.6 8.6

208 213 208 218 218

1.7 1.8 1.7 1.8 1.8

0.8 0.8 0.8 0.8 0.8

2.1 2.9 4.5 5.1 5.1 6.8 9.8 14.7

8.1 8.3 8.1 8.5 8.5 9.8 10.0 9.8

205 210 205 215 215 249 254 249

1.7 1.8 1.7 1.8 1.8 2.2 2.2 2.2

0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0

Push & Trigger Start – P Handle – Clecomatic Clutch 14PCA02Q 14PCA03Q 14PCA04Q 14PCA05Q 14PCA06Q

#6 #8 #10 #10 #10

M3.5 M3.5 M4 M4 M4

Trigger Start – P Handle – Clecomatic Clutch 14PTA02Q 14PTA03Q 14PTA04Q 14PTA05Q 14PTA06Q 14PTA07Q 14PTA10Q 14PTA15Q

#6 #8 #10 #10 #10 #10 1/4" 1/4"

M3.5 M3.5 M4 M4 M4 M5 M5 M6

CLECO - NO.8, 88 SERIES SCREWDRIVERS 8, 88 Series Torque Range: 0.8 – 19 Nm 7.0 – 170 In. Lbs Screw Size: M3.5 – M6 #8 – 5/16

Bit and finder, quick change and square drive Short stroke button reverse External torque adjustment (Quick change)

Model Number

Bit & Finder

Screw Size Free Gr. 5 Gr. 9.8 Speed 1/4 ” Hex Quick Change 3/8” Square Drive in. mm RPM

Torque Range

Length*

Weight

in.-lbs.

in.

lbs.

Push-to-Start - Push Button Reverse 8RSA-40 8RSA-30 8RSA-20 8RSA-10

8RSA-40BQ 8RSA-30BQ 8RSA-20BQ 8RSA-10BQ 8RSA-7BQ 8RSA-5BQ 88RSA-7CQ 88RSA-5CQ

88RSA-7C-3 88RSA-5C-3

#8 #10 #10 #10 1/4 1/4 1/4 5/16

M3.5 M4 M4 M5 M5 M5 M6 M6

3200 2500 1800 800 550 400 550 400

7-25 7-30 7-40 7-65 7-75 7-75 15-95 15-160

.8-2.8 .8-3.4 .8-4.5 .8-7.3 .8-8.5 .8-8.5 2-10 2-18

8.9 8.9 8.9 9.6 9.6 9.6 9.5 9.5

241 241 241 260 260 260 241 241

2.1 2.1 2.1 2.4 2.4 2.4 2.6 2.6

1.0 1.0 1.0 1.1 1.1 1.1 1.2 1.2

#10 #10 1/4 1/4 5/16

M4 M5 M5 M6 M6

2000 1000 650 650 500

7-42 7-67 7-75 15-100 15-170

.8-4.7 .8-7.6 .8-8.5 2-11 2-19

8.5 9.1 9.1 9.1 9.1

232 251 251 232 232

2.0 2.3 2.3 2.5 2.5

0.9 1.0 1.0 1.1 1.1

#10 #10 5/16

M4 M5 M6

1800 800 400

7-38 7-60 15-160

.8-4.3 .8-6.8 2-18

10.5 11.3 11.1

282 302 282

2.6 2.9 3.1

1.2 1.3 1.4

Push-to-Start - Non-Reversible 8SA-10

8SA-20BQ 8SA-10BQ 8SA-7BQ 88SA-7CQ 88SA-5CQ

88SA-5C-3

Push and Lever Start - Push Button Reverse 8RSAL-20

8RSAL-20BQ 8RSAL-10BQ 88RSAL-5CQ

88RSAL-5C-3

8RSAL–10BQ

8, 88 Series Torque Range: 0.8 – 20 Nm 7.0 – 180 In. Lbs

Screw Size: M3.5 – M6 #8 – 5/16” Bit and finder, quick change and square drive Reversible

Model Number

Bit & Finder

Screw Size Free Gr. 5 Gr. 9.8 Speed 1/4 ” Hex Quick Change 3/8” Square Drive in. mm RPM

Torque Range in.-lbs.

Length*

Weight

in.

lbs.

Push-to-Start - Sliding Knob Reverse 8RSAP-20BQ 8RSAP-10BQ 8RSAP-7BQ

#10 #10 1/4

M4 M5 M5

1800 800 550

7-40 7-65 7-75

.8-4.5 .8-7.3 .8-8.5

8.5 9.3 9.3

216 235 235

2.8 3.0 3.0

1.3 1.4 1.4

#8 #10 #10 1/4 1/4 1/4 5/16 5/16

M3.5 M4 M5 M5 M5 M6 M6 M6

3200 1800 800 550 400 550 400 200

7-25 7-40 7-65 7-75 7-75 15-95 15-160 15-180

.8-2.8 .8-4.5 .8-7 .8-8.5 .8-8.5 2-10 2-18 2-20

8.5 8.5 .3 9.3 9.3 9.3 9.0 9.0 9.8

216 216 235 235 235 229 229 248

2.8 2.8 3.0 3.0 3.0 3.1 3.1 3.4

1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.5

10 10 10 1/4 1/4 1/4 5/16 5/16

M4 M4 M5 M5 M5 M6 M6 M6

2500 1800 800 550 400 550 400 200

7-30 7-40 7-65 7-75 7-75 15-95 15-160 15-180

.8-3.4 .8-4.5 .8-7.3 .8-8.5 .8-8.5 2-10 2-18 2-20

8.4 8.4 9.1 9.1 9.1 8.9 8.9 9.6

213 213 232 232 232 225 225 245

2.8 2.8 3.0 3.0 3.0 3.1 3.1 3.4

1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.5

Push and Trigger Start - Sliding Knob Reverse

8RSAPT-10BQ 8RSAPT-5B

8RSAPT-40BQ 8RSAPT-20BQ 8RSAPT-10BQ 8RSAPT-7BQ 8RSAPT-5BQ 88RSAPT-7CQ 88RSAPT-5CQ 88RSAPT-2CQ

88RSAPT-5C-3

88RSAPT-5CQ

Trigger Start - Sliding Knob Reverse 8RSATP-30BQ 8RSATP-20BQ 8RSATP-10BQ 8RSATP-7BQ 8RSATP-5BQ 88RSATP-7CQ 88RSATP-5CQ 88RSATP-2CQ

88RSATP-7C-3 88RSATP-5C-3 88RSATP-2C-3

Clecomatic Clutch

REVERSING SCREWDRIVERS & NUTRUNNERS

SCREWDRIVER ACCESSORIES

“CLICK” TYPE TORQUE SENSING WRENCHES

IMPACT WRENCHES (INDUSTRIAL & AUTOMOTIVE) PAIRS E R ERT BRAND P X E ALL ON

SQUARE DRIVE

WEIGHT (lbs)

3/8”

2-1/4

Bolt Cap: 3/8” Torque: 75 ft. lbs.

3/8”

2-1/4

Bolt Cap: 3/8” Torque: 75 ft. lbs.

1/2”

Bolt Cap: 9/16” Torque: 275 ft. lbs.

1/2”

Bolt Cap: 5/8” Torque: 375 ft. lbs.

1/2”

5-3/4

Bolt Cap: 5/8” Torque: 425 ft. lbs.

3/4”

10-1/2

Bolt Cap: 3/4” Torque: 1100 ft. lbs.

1”

3/8”

2-3/4

CAPACITY

KT81550

KT81560

KT81620

AP555

IR231C

IR261 Bolt Cap: 1-1/4” Torque: 1450 ft. lbs. With 6” Extended Anvil

IR285A-6 RATCHET Overall Length: 10” Bolt Cap: 3/8” Torque: 50 ft. lbs.

AP1139

AP1114 68

1/4”

Overall Length: 6-1/4” Torque: 30 ft. lbs.

PRICE NEW

S PAIRDS E R AN ERT EXP ALL BR ON

150

AIR SANDERS The Model 150 is the perfect sander for applications where small size and light weight are needed. It features the same air motor and orbital sanding action as the Model 400, but a smaller pad size and 2/3 lb. less weight. That means more power per square inch of abrasive in an easy-to-handle tool and convenient single-handed operation. The Model 150 meets current OSHA noise level standards. APPLICATIONS INCLUDE: Feather edging • Finish sanding • Blending • Blocking

NATIONAL-DETROIT 400 DESCRIPTION: Heavy Duty Orbital Action Single Pad. SPECIFICATIONS: Ideal for metal or wood finishings. PAD SIZE: 3-1/2” x 6-1/2” PAPER SIZE: 3-2/3” x 9” 600 DESCRIPTION: Straight Line Action - Single Pad SPECIFICATIONS: Built-in water attachment sprays water directly on the work for wet sanding. PAD SIZE: 3-1/2” x 6-1/2” PAPER SIZE: 3-2/3” x 9” DA6 DA6Q

DESCRIPTION: Dual Action: MODEL DA6 SPECIFICATIONS: Provides scratch free sanding and does not generate heat. Ideal for feather work. MODEL DAQ6 same as DA except it has a lower noise level PAD SIZE: 5”, or 6” PAPER SIZE: 5”, or 6” EP 6017

DESCRIPTION: Straight Line Action SPECIFICATIONS: Double Piston, reciprocating stroke PAPER SIZE: 2-3/4” x 17-1/2”

AP 300

DESCRIPTION: Dual Action SPECIFICATIONS: PAD SIZE: 5”, or 6” PAPER SIZE: 5” OR 6” ECONOMY MODEL PALM GRIP DUAL ACTION SANDER DESCRIPTION: Random Orbital Action SPECIFICATIONS: Free Speed: 10,000 RPM Air Inlet: 1/4”, Weight: 2-1/2 lbs. EP 6011 Avg. Air Consumption: 4.2 CFM DESCRIPTION: 5” Hi-Speed Sander SPECIFICATIONS: Lightweight, 18,000 RPM PAD SIZE: 3”,4”,5” PAPER SIZE: 3”,4”,5” KT85265

AIR SANDERS SPECIFICATIONS TOOL TYPE

NO LOAD SPEED REV/MIN

AIR CONSUMPTION CFM

EP6014 16,000 EP6016 16,000 BELT WIDTH EP6014 3/8”-13” EP6016 3/4”-13”

.4 .55

Belt Sander WEIGHT LBS.

TYPICAL APPLICATIONS

1-2/3 3

GRIT 60, 80, 120 60, 80, 120

Sanding the inside of a cut-out

Sanding into square corners

Sanding inside a channel section

Radius sanding

Surface sanding on flat belt pressure pad

Surface sanding using contact roller

DOTCO® RANDOM ORBITAL SANDERS 12-18 Series Nominal Motor Power 0.24 hp 0.18 kW Low profile for more sanding control Lightest weight to reduce operator fatigue Extremely efficient built-in vacuum system with swivel hose fittings 3/16” & 3/32” random orbital pattern

3/16” Orbit

Model Number 3/32” Orbit

Sanding Pad Size

Free Speed rpm

12-18 Series – Random Orbital Sander – Non Vacuum 12L1820-03 3.5” 12,000 12L1820-05+ 12L1823-05+ 5.0” 12,000 12L1820-06+ 12L1823-06 6.0” 12,000 12-18 Series – Random Orbital Sander – Central Vacuum, Vacuum Attachment

Weight lb. kgs.

1.56 0.71 1.62 0.73 1.68 0.76 & Shroud

12L1820-13 3.5” 12,000 1.60 0.73 12L1820-15+ 12L1823-15 5.0” 12,000 1.73 0.78 12L1820-16+ 6.0” 12,000 1.90 0.86 12-18 Series – Random Orbital Sander – Self-Generated Unit with Vacuum Hose & Floor Bag 12L1820-25+ 5.0” 12,000 1.73 0.78 12L1820-26+ 6.0” 12,000 1.80 0.82

MASTERFILE FINISHING TOOL KIT & MOUNT When you order the Masterfile kit you get flexibility and accuracy, because you’ll get the tool and all three interchangeable arms as well as the belts and wrenches that go with them. You’ll be ready for just about any finishing project when you get your hands on the Masterfile kit. Kit includes the following: 1-Tool with 3/4” wide standard arm & 80 grit abrasive belt MP4705 1-3/4” open end wrench 70431300 1-9/16” open end wrench 70481600 1-3/16” Hex Wrench 70417600

1-9/64” Hex Wrench 70480800 1-1/4” Collet 70428600 1-Collet Cap 70428400 1-Collet Chuck 70428500 1-1/4 X 18 Coated 60 Grit Abrasive belt 70468000 1-1/4 X 18 Coated 80 Grit Abrasive belt 70468100 1-1/4 X 18 Coated 120 Grit Abrasive belt 70468200 1-1/2 X 18 Coated 60 Grit Abrasive belt 70473600 1-1/2 X 18 Coated 80 Grit Abrasive belt 70468500 1-1/2 X 18 Coated 120 Grit Abrasive belt 70468600 1-3/4 X 18 Coated 60 Grit Abrasive belt 70473500 1-Non-woven nylon belt 70468900 1-Kit box with foam insert 70480900 1-1/2” wide standard arm 70480700 1-Offset Arm 70480200

Model No. Contact Arm Length Weight Belt Size MP-4705-1 Straight 15” (381mm) 2.5 lbs. (1.1kg) 5/8” or 3/4” W x18”L

Levers allow users to visually see the difference between 3/16” and 3/32” machines 3 interchangeable grips to fit all hand sizes

in.

Height mm

Length in. mm

3.33 3.33 3.33

84.58 84.58 84.58

5.11 5.48 5.48

129.79 139.19 139.19

3.33 3.33 3.33

84.58 84.58 84.58

6.98 7.75 7.75

177.29 196.85 196.85

3.33 3.33

84.58 84.58

8.33 8.84

211.58 224.54

MASTERFILE KIT MP4705K Power .51 HP (380 W)

Motor Speed 20,000 RPM

Belt Speed 4,550 SFPM (1382 SMPM)

ABRASIVE POWER TOOLS

DYNADIE® III – No. 12250 DYNAFILE® VERSATILE ABRASIVE BELT SANDER

• Use on metal, wood, plastic, fiberglass, etc.

No. 14000 . . .

• Replaces tedious hand filing – enter narrow slots.

AIR POWERED BELT SANDER ONLY

• Barrel indexes 360º for total operator comfort and control.

No. 14010 VERSATILITY KIT

• Accepts 1/4” dia. Or 1/8” dia. shanked files. Order files separately.

Includes 5 different Contact arms, No. 14000 Belt Sander and abrasive belts.

• Thermal-insulated handle reduces cold air transmission to operator.

• Variable length stroke from 0-1/4”; 5,000 strokes per minute. • Built-in air-flow regulator. • Order files separately.

FEATURES

Polish with unsupported part of belt

Grind radius with belt over shaped contact wheel

Uses 19 varieties of superior quality Swiss pattern files

DYNAFILE® II – No. 40320 Enter Narrow Channels Work over Dynapad® platen

• Replaces tedious hand filing & sanding (4000 SFPM). • Lightweight and easy to use. • Superior belt tracking. • Uses 1/8”, 1/4” & 1/2” wide x 24” long belts • In addition to coated abrasive belts, non-woven nylon and cloth polishing belts may be used. • Contact arms and belts changed easily without tools.

27 INTERCHANGEABLE ARMS FOR TOTAL GRINDING AND POLISHING VERSATILITY

MINI-DYNORBITAL® SANDER Air tool uses fine grade discs for finesse sanding and defuzzing wood. ANGLE-HEAD

POWERFUL, LIGHTWEIGHT ABRASIVE BELT SANDER • Work on metal, wood, plastic, fiberglass, etc. • Eleven interchangeable contact arms. • Uses 1/4”, 1/2” and 3/4” wide x 18” long belts. • Grinding head pivots to virtually any angle.

No. 40321 Versatility Kit Kit includes 40320 Dynafile II, 3 different contact arms, abrasive belts, and 1/4” collet for converting motor to a die grinder.

PALM-STYLE

LIGHTWEIGHT DYNORBITAL® – SPIRIT AIR-POWERED RANDOM ORBITAL SANDER FOR SWIRL-FREE FINISHING ON METAL, WOOD, PLASTIC AND FIBERGLASS

No. 53430 3,200 RPM Uses 3/4” and 1-1/4” discs

No. 57500 5,000 RPM Uses 3/4” and 1-1/4” discs.

TWO-HAND DYNORBITAL® SANDER

Non-Vacuum 5” Model No. 59020 6” Model No. 59025 Low vibration: 12,000 RPM PALM-STYLE – WEIGHS ONLY 2.1 LBS

Long Handle Random Orbital Sanders Abrasive Capacity: 5” and 6” diameter discs. Provides better reach and comfort, especially when sanding vertical sides.

Non-Vacuum Models Model No. 58400 – 5” Diameter Model No. 58405 – 6” Diameter

5” Model No. 59020 6” model No. 59025

Vacuum–Ready Models Model No. 58401 – 5” Diameter Model No. 58409 – 6” Diameter *Provides excellent comfort and control , especially when working on vertical sides of workpiece. Long Handle allows two-handed support of tool.

Easy one-handed control Adjustable speed.

Vacuum– Ready models accept a self-contained dust collection system!

DOTCO速 CARBIDE BUR & MOUNTED WHEEL GRINDERS/SANDERS

Model #: 12L1281-36

DOTCO® BELT SANDERS

DOTCO®

12L1280-36B6

12-12,12-13 & 12-28 Series Nominal Motor Power 0.3 & 0.9 hp 0.22 & 0.67 kW

12L1281-36B2

Rear Exhaust Woven & Non-Woven Belts 12L2887–13 !

Model Number Front Exhaust

Sanding Belt Capacity

Rear Exhaust

Free Speed

Tools must be ordered with lock-off lever throttle to be CE compliant. See ordering details below.

Weight

Length

rpm

lbs.

kgs

in.

1/2” x 18”

12,000

1.8

0.8

15.6

396

1/4” x 12” 1/4” x 12” 1/2” x 12” 1/2” x 12” 1” x 12” 1” x 12” 1/2” x 24” 1/2” x 24” 1” x 24” 1” x 24”

20,000 12,000 20,000 12,000 20,000 12,000 20,000 12,000 20,000 12,000

1.4 1.4 1.4 1.4 1.7 1.7 1.6 1.6 2.2 2.2

0.6 0.6 0.6 0.6 0.8 0.8 0.7 0.7 1.0 1.0

11.3 11.3 11.3 11.3 11.3 11.3 16.4 16.4 16.4 16.4

287 287 287 287 287 287 417 417 417 417

1/4” x 12” 1/2” x 12” 1” x 12” 1/2” x 24” 1” x 24”

20,000 20,000 20,000 20,000 20,000

1.4 1.4 1.7 1.6 2.2

0.6 0.6 0.8 0.7 1.0

11.3 11.3 11.3 16.4 16.4

287 287 287 417 417

1/2” x 12” 1” x 12” 1” x 12”

18,000 18,000 18,000

2.6 2.8 3.4

1.2 1.3 1.5

12.5 12.5 18.8

318 318 478

12-12 Series – 0.3 hp (0.22 kW) – Non-Woven Belt 12L1200-36B6

12L1280-36B6

12-12 Series - 0.3 hp (0.22 kW) - Sanding Belt 12L1201-36B1 12L1200-36B1 12L1201-36B2* 12L1200-36B2* 12L1201-36B4 12L1200-36B4 12L1201-36B3 12L1200-36B3 12L1201-36B5 12L1200-36B5

12L1281-36B1 12L1280-36B1 12L1281-36B2 1211280-36B2 12L1281-36B4 12L1280-36B4 12L1281-36B3 12L1280-36B3 12L1281-36B5 12L1280-36B5

12-13 Series - 0.3 hp (0.22 kW) - Gearless - Sanding Belt 12L1382-36B1 12L1382-36B2 12L1382-36B4 12L1382-36B3 12L1382-36B5

12-28 Series - 0.9 hp (0-.67 kW) - Sanding Belt 12L2887-12 12L2887-13 12L2887-24

* MOST POPULAR MODELS – RAPID SELECT MEANS FAST DELIVERY

“ECONOMY MODEL” ANGLE GRINDER/SANDER

REAR EXHAUST

EG5003C

COLLET SIZE

RPM (Free Speed)

WEIGHT (Ibs.)

LENGTH

1/4

20,000

1-1/4

5-1/4”

IRS T REPA S EXPER D L BRAN ON AL

AIR SANDERS & GRINDERS

KT87125

Model #: 12L2252-80

Model #: 12L2752-80

DOTCO速 MINIATURE PRECISION TOOLS

Model #: 10R0401-18

Standard With Collet Guard

Model #: 12RO410-18 Standard With Sleeve and Collet Guard

Model #: 12R0380-18

DOTCO速 CARBIDE BUR & MOUNTED WHEEL GRINDERS

Model #: 12L1001-36

Model #: 12L2080-01

Model #: 12L2580-01

GRINDERS 10-11 Series

18,000 – 28,000 RPM 0.3 – 1.2 hp (0.22 – 0.9 kW) Extended housings 12-11 Series

Aluminum, composite or rugged steel housings

12-26 Series

Inline Extended Grinders For Carbide Burrs, Mounted Points, Mounted Wheels Free Speed

Model Number Front Exhaust

Side Exhaust

Rear Exhaust

rpm

Abrasives Capacity

Weight Type Housing lbs. kgs

Length in.

Collet Size

Air Inlet Size

12-11 Series - 0.3 hp (0.22 kW) - 5” (127mm) Extension - 300 Series Collet 12L1101-36 12L1112-36•

12L1181-36

28,000 25,000

1/2” Carbide Burr, 1” Mtd. Wheel 1/2” Carbide Burr, 1” Mtd. Wheel

C C

1.3 1.3

0.6 0.6

10.9 277 10.9 277

1/4” 1/4”

1.2

0.5

9.8

248

1/4”

4.2

1.9

23.5 597

1/4”

10-11 Series - 0.3 hp (0.22 kW) - 5” (127mm) Extension - 300 Series Collet 10L1101-36

10L1181-36

28,000

1/2” Carbide Burr, 1” Mtd. Wheel

12-26 Series – 0.9 hp (0.67 kW) – Multiple Extension - 300 Series Collet 12S2674-2A•

18,000

3/4” Carbide Burr, 11/2” Mtd. Wheel

Housing Guide: A=Aluminum, C=Composite, S=Steel *Governor controlled speeds

STANDARD EQUIPMENT: Applicable collet, collet wrenches

‡Mounted wheel capacity depends on wheel diameter, thickness and overhang. Consult wheel manufacturer for speed recommendations.

MULTIPLE EXTENSIONS FOR 12-26 SERIES: Each extension changes the tool length and weight by: 12-26 series = 7.25” (184mm) and 1.2 lbs. (0.54 kg); The length and weight in the table are for 2A models 1A = One extension 2A = Two extension 3A = Three extensions, etc. All multiple extensions are not available in all speeds

GENERAL: All tools performance rated @ 90psi (620 kPa) air pressure. Minimum Hose I.D.– 10-11, 12-11 Series: 1/4” (4.8mm) 12-26, 136 Series: 5/16” (7.9mm)

Dotco® miniature precision tools

HUTCHINS AIR SANDERS & GRINDERS

Final Finishing

Model 3500 SUPER SANDER III RANDOM ORBIT ACTION. Designed for today’s needs. The Super Sander III offers the same ultra-fine finishing as the 4500 in a lightweight-low profile configuration. Composite motor housing and shroud reduce weight and insulate the operator from vibration. Ultra smooth motor with positive action drive and unique 4 bearing support insures full contact sanding. Oversized drive head eliminates pad wobble. Built-in pad release feature.

Model 3500 Part No. 3500 6” PSA Pad Std. Part No. 3500H 6” Hookit Pad

RPM: 10000+ Wt: 2lbs. 3.5 oz. Air Consumption: 11.0 cfm @ 90 PSI Noise Level: 80 dBa

Model 3560

Primary Material Removal RANDOM ORBIT ACTION. The 3560 is a more aggressive version of the Model 3500 for those looking for rapid material removal in a light weight-low profile configuration. The composite motor housing and shroud reduce weight and insulate to insure vibration - free sanding. The unique 4 bearing support and oversized drive head eliminate pad wobble while insuring full pad contact. Includes a patented pad release feature.

Model 3560 Part No. 3560 6” PSA Pad Std. Part No. 3560H 6” Hookit Pad

Vacuum Extraction

RPM: 10000+ Wt: 2lbs. 3.5 oz. Air Consumption: 11.0 cfm @ 90 PSI Noise Level: 84 dBa

Water Sanding 7044 & 7044-6 “WATER BUG II” SERIES: Part No. 7044

Model 2000 VA/DF HUSTLER STRAIGHTLINE RECIPROCAL ACTION. 2-Cylinder, oversized common piston, powers twin-drive vertically-engaged gears with synchronized strokes so smooth that the 2000 VA/DF gets lighter with use. Precision-built, the HUSTLER does almost anything but finish and paint the surface. Rugged, but almost delicate in performance. With VA/DF options it becomes the healthiest, most productive straightline available.

SPM: 3000 Wt: 6lbs. 2 oz. Air Consumption: 6.2 cfm @ 90 PSI Noise Level: 88 dBa Pad size 2 3/4” X 16” Pierce plate Part No. 1992 Optional

ORBITAL ACTION. World’s most versatile water sander. 20’ High-Pressure Water Hose with filtered, venturi-generated flow, guarantees effective water sanding anywhere. Just drop the hose in any appropriate water container, adjust the flow - and do it! New High Performance Motor using balanced rotor with 2-piece self-expanding vanes for unexcelled torque provides constant power for any sanding need. Unique bypass system protects all motor components from moisture ensuring long-life productivity. Features a medium-density pad for all preliminary sanding needs, then use the Interface Pad for superb finish sanding and removal of defects in clear coats. Comes complete with General Purpose Pad, Interface Finishing Pad, and 20’ H.P. Water Hose. Two Pad sizes: 3-2/3" X 7" and 6" Pad (round) available. RPM: 8500+ Wt: 4lbs. 1 oz. Part No. 7044 – Pad size 3 2/3” X 7” (Paper 3 2/3” X 9”) Air Consumption: 10.4 Part No. 7044-6 – Pad size 6” round (Velcro) cfm @ 90 PSI Noise Level: 81 dBa

5 PG. 8 SEE OR F OFF CUT- L TOO

Part No. 50690

ABRASIVES

100

QUICK CHANGE SOCATT LAMINATED DISCS

CARBIDE ROTARY FILES

HIGH SPEED STEEL AVAILABLE

ROUTERS

Attachment Number Included

New! Ergonomic Safety Lever Attachment Number Included

ROUTERS ACCESSORIES Router Assemblies For use with Dotco 12-10, 12-20 and 12-25 series. Cutter Shank Complete Capacity Attachment

Tool Series 12-10 12-20/12-25 12-20/12-25 12-12/12-22/12-27

1/4” 1/4” 3/8” 1/4”

14-2187 14-2180 14-2429 7197

Part Number Nose Housing*

Bearing

Ring

Lock Nut

Router Housing

14-2176 14-2176 14-2426

14-0508 14-0508 14-0533 14-0508

1098 1098 1068 1098

14-2082 14-2082 14-2082 N/A

14-1180 14-2180 14-2180 N/A 14-2180

ECONOMY MODEL

ROUTERS GUIDES FOR 1/4 ROUTER BITS +.000 –.010

C 1/4

1/2–20 NF

+.000 –.010 A

`281” DIA.

DOTCO速 ROUTERS

Series 12-25

Series 10-40

Series 10-43 Model #: 10T4318-62

SAWS OSCILLATING SAWS Nominal .6 HP – rear Exhaust Capacity: 2” or 2-1/2”” Saw Blades

12L-2065-90

Ergonomic Series 12-22

Cuts in confined areas are made simple and easy. It performs well on straight and curved surfaces, pipe, mild steel, aluminum, plastic and fiberglass.

Mini Air Saw

SPECIFICATIONS • Strokes Per Minute: 9000 • Weight: 1-3/8 Lbs. • Length: 9-1/4” • Air Inlet: 1/4” • Avg. Air Consumption: 6 C.F.M.

No. IR429

FP 5650 Assorted Saw Blades 10 pcs., H.S.S.

BOSCH

AIR JIG SAW No. 0607561-120 * Orbiting blade action provides optimum cutting efficiency. * Four position adjuster gives the ideal blade orbit for each job. * Base plate can set to any angle up to 45º * Set of three different saw blades are supplied to suit a variety of applications and materials. * Powerful 0.54 HP motor provides smooth cutting action, 2200 RPM.

AIR-SPEED RECIPROCATING SAW & FILE #HS125 – HEAVY DUTY . . . . . . • • • • • • •

Fully Portable Saw Cuts Steel, Stainless & Aluminum Front Barrel Can Be Turned 360º For Access Into Tight Areas Regulating Throttle That Locks Into Tight Areas Adjustable Blade Strokes Range Of 1/2” – 1-1/4” Regulating Throttle That Locks Into Designated Speed 4-1/2 lbs. (Set of 4” blades — 14, 18, 24, 32, Tooth —

RECIPROCATING SAW

UTILITY CUT–OFF TOOL Slices through sheet metal, bolts and steel rods Specifications: Model Number

Free Speed-rpm

KT88255

20,000

Length In.

Air Inlet

1/4”

SE FOR E PG. 7 9 CU WHE T–OFF ELS

#122060 ... cut off wheel only

MILWAUKEE

ELECTRIC Catalog Number

Weight lb. 1-3/4

Stroke

Strokes per minute

Overall Length Inches

Load Speed Amps

3/4”

0-2800

16”

17-1/8

Hose connection 1/4” PT

Net Weight Tool Only Lb. Oz. 7

6509-22 in Metal Box

SIOUX AIR

SX1300

5/8”

1800

Metal & Wood Blades Available

DOTCO速 SAWS

Model #: 12S1283-02

Model #: 12S2794-02

Model #: 12S2749-01

DOTCO速 SAW ACCESSORIES

KETT PORTABLE POWER PANEL SAWS

CUTTING TOOLS

Max Cutter Cap 5/8

A D

.086

Specify

CARBIDE COUNTERSINKS 150 CT SERIES CARBIDE TIPPED STOP COUNTERSINK Integral pilot, threaded shank 150CT SERIES... These countersinks excel in cutting highly abrasive materials. “The difficult-to-machine” materials, and in cutting material where longer too life is desired. The tool body is made of high speed steel. Two flute 100° angle is standard. TOOL

“D”

“S”

PILOT

NUMBER

BODY DIA.

SHANK SIZE

RANGE

151 CT

7/16 1/2

153 CT

5/8

1/4-28 1/4-28 1/4-28

3/32-3/16

152 CT

155 CT

3/4

3/8-24

1/4-3/8

156 CT 157 CT

7/8 1

3/8-24

1/4-7/16 5/16-1/2

3/32-1/4 5/32-5/16

3/8-24

150 SC SERIES SOLID CARBIDE STOP COUNTERSINK Integral pilot, threaded shank 150 SC SERIES... These countersinks are similar in design to the 150CT Series, except that this tool is made with solid carbide head butt brazed to steel shank giving pilot equal wear resistance to cutting edge. 100° angle is standard. Special angles subject to quote.

TOOL

“D”

“S”

PILOT

NUMBER

BODY DIA.

SHANK SIZE

RANGE

151 SC

7/16 1/2

153 SC

5/8

1/4-28 1/4-28 1/4-28

3/32-3/16

152 SC

155 SC

3/4

3/8-24

1/4-3/8

156 SC 157 SC

7/8 1

3/8-24

1/4-7/16 5/16-1/2

3/8-24

3/32-1/4 5/32-5/16

HOW TO ORDER THREADED SHANK INTEGRAL PILOT COUNTERSINK CUTTERS When ordering please specify: Tool number, Number of flutes, material Include angle and Pilot diameter Example: 152-CT-100° -3/16 = 1/2 x 100° x 3/16, Carbide tipped, 1/4-28, 2 flute Standard pilot diameters: 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/4, #40, #30, #21, #11, #10

CUTTING TOOLS COUNTERBORES L

3/8”

1/4”

P thru 1” cutter diameter 1 7/16” thru 1 1/2” cutter diameter

MM 275 Counterbores are for use in portable drill motors and drill presses. Quality made of high speed tool steel, properly heat treated and precision ground to insure free cutting. Corner radii ground to aircraft standards. Refer to MM 276 for pilots. Carried in stock in the sizes shown.

#275K25 COUNTERBORE KIT

#275K13 COUNTERBORE KIT

25 Pcs. in Plastic Case Size: 1/4”-1” by 1/32 grad.

13 Pcs. in Plastic Case Size: 1/4”-1” by 1/16 grad.

#275K45P COUNTERBORE KIT

#275K23P COUNTERBORE KIT

25 Pcs. As Above Plus 20 Assorted Pilots

13 Pcs. As Above Plus 10 Assorted Pilots

COUNTERBORE PILOTS D

SHANK SIZE

MM 276 Pilots are for use in the MM 275 counterbores. Made from heat treated tool steel and precision ground to insure concentricity and size tolerances. Carried in stock in the sizes shown.

WHEN ORDERING PLEASE SPECIFY PART NUMBER AND SHANK DIAMETER -A OR -C REFER BELOW TO THE RANGE OF PILOT DIAMETERS FURNISHED WITH EACH SIZE PILOT SHANK.

Example: MM 276-2 A for 1/8 pilot x 1/8 shank

CARBIDE TIPPED AIRCRAFT COUNTERBORES 850 SERIES Replaceable pilot, straight shank TOOL NUMBER

"D" "PH" CUTTER DIA. PILOT HOLE DIA.

"S" SHANK DIA.

O.A.L. OVERALL LENGTH

850-1 850-2 850-3 850-4 850-5 850-6 850-7 850-8 850-9

1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2

3/32 3/32 3/32 3/32 3/32 1/8 1/8 1/8 1/8

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

2-3/8 2-3/8 2-3/8 2-3/8 2-3/8 2-3/4 2-3/4 2-3/4 2-3/4

850-10 850-11 850-12

17/32 9/16 19/32

1/8 1/8 1/8

1/4 1/4 1/4

2-3/4 2-3/4 2-3/4

850-13 850-14 850-15

5/8 21/32 11/16

1/8 3/16 3/16

1/4 1/4 1/4

2-3/4 2-3/4 2-3/4

850-16 850-17 850-18

23/32 3/4 25/32

3/16 3/16 3/16

1/4 1/4 1/4

2-3/4 2-3/4 2-3/4

850-19 850-20 850-21

13/16 27/32 7/8

3/16 3/16 3/16

1/4 1/4 1/4

2-3/4 2-3/4 2-3/4

850-22 850-23 850-24

29/32 15/16 31/32

3/16 3/16 3/16

1/4 1/4 1/4

2-3/4 2-3/4 2-3/4

850-25 850-26 850-27

1 1-1/16 1-1/8

3/16 3/16 3/16

1/4 3/8 3/8

2-3/4 2-3/4 2-3/4

850-28 850-29 850-30

1-3/16 1-1/4 1-5/16

3/16 1/4 1/4

3/8 3/8 3/8

2-3/4 2-3/4 2-3/4

850-31 850-31B 850-32

1-3/8 1-7/16 1-1/2

1/4 1/4 1/4

3/8 3/8 3/8

2-3/4 2-3/4 2-3/4

850-33 850-34 850-35

1-9/16 1-5/8 1-11/16

5/16 5/16 5/16

1/2 1/2 1/2

3-1/16 3-1/16 3-1/16

850-36 850-37 850-38

1-3/4 1-13/16 1-7/8

5/16 5/16 5/16

1/2 1/2 1/2

3-1/16 3-1/16 3-1/16

850-39 850-40

1-15/16 2

5/16 5/16

1/2 1/2

3-1/16 3-1/16

850 SERIES carbide counterbores are similar in design to the 275 Series highspeed steel cutters. They excel in cutting highly abrasive materials, and are recommended for counterboreing and spot-facing the ”difficult to machine” and ”exotic” materials in which high speed steel will not perform satisfactorily. Also recommended for any application where longer tool life is desired. Special ”D” cutter diameters may be readily ground from standard sizes listed. Special cutters given prompt attention. All cutters furnished with 1/64 corner radius. Maximum non-cutting diameter is 1/32 larger than the pilot hole. Recommend using pilots with ”H” head diameter 1/32 minimum larger than ”S” shank diameter. For pilot information see MM276 Series.

CUTTING TOOLS

BACK SPOTFACER CUTTERS

Bayonet lock type

MM 280 Back spotface cutters are made from high speed tool steel properly heat treated and ground with proper clearances to insure free cutting. Corner radii, ground to aircraft standards. For use in restricted areas where conventional type spotfacing cutters cannot be used.

TOOL NO. MM 280-1J MM 280-1K MM 280-2K MM 280-2L MM 280-3K MM 280-3L MM 280-4K

DIA 1/4” 1/4” 5/16” 5/16” 3/8” 3/8” 7/16”

PILOT SIZE 3/32” 1/8” 1/8” 5/32” 5/32” 3/16” 5/32”

MM MM MM MM MM MM MM

7/16” 1/2” 1/2” 9/16” 9/16” 5/8” 5/8”

3/16” 3/16” 1/4” 3/16” 1/4” 1/4” 5/16”

280-4L 280-5K 280-5L 280-6K 280-6L 280-7K 280-7L

CARBIDE AVAILABLE SEE PAGE 94

BACK SPOTFACER CUTTER KIT BACK SPOTFACER CUTTER KIT

Includes: all MM 280 Backspotfacer cutters 1/4” through 5/8” with 6 Pilots in Box #280K20...............................

BAYONET PILOTS FOR BACKSPOTFACERS AND COUNTERSINKS

MM 285 Pilots are made from tool steel, heat treated on working end, and ground to insure free operation in holes to be countersunk or spotfaced. For use with MM 280, MM 290 and MM 295 cutters. Step type pilots, to customer’s specifications, will be supplied on special order.

CUTTING TOOLS MM290 Back countersink cutters are made from high speed tool steel properly heat treated and ground with proper clearances to insure free cutting. For use in restricted areas where conventional type countersinking tools cannot be used.

BACK COUNTERSINK CUTTERS Bayonet lock type

Pilot Size

CARBIDE AVAILABLE SEE PAGE 94

TOOL NO.

DIA

PILOT SIZE

MM290-1J MM290-1K MM290-2K MM290-2L MM290-3K MM290-3L MM290-4K

1/4” 1/4” 5/16” 5/16” 3/8” 3/8” 7/16”

3/32” 1/8” 1/8” 5/32” 5/32” 3/16” 5/32”

MM290-4L MM290-5K MM290-5L MM290-6K MM290-6L MM290-7K MM290-7L

7/16” 1/2” 1/2” 9/16” 9/16” 5/8” 5/8”

3/16” 3/16” 1/4” 3/16” 1/4” 1/4” 5/16”

WHEN ORDERING PLEASE SPECIFY PART NUMBER AND A-DEGREE. FOR PILOTS REFER TO MM 285. SEE PAGE 92. SPECIAL DIAMETERS AND PILOT HOLE SIZES AVAILABLE ON SPECIAL ORDER.

BACK COUNTERSINK CUTTER KIT BACK COUNTERSINK CUTTER KIT

Includes: all MM290 Countersink cutters 1/4” through 5/8” with 6 Pilots in Box #290K20............................... D

HIGH SPEED STEEL A

THREAD COLLAR REMOVAL CUTTERS

(20 PIECES)

• For collar removal on Hi-Shear and Huck Fasteners • 1/4” x 28 Male Threaded Shank

CARBIDE REVERSE COUNTERSINKS AND SPOTFACERS 181 SERIES

191 SERIES

CARBIDE REVERSE COUNTERSINKS

CARBIDE REVERSE SPOTFACERS

191 SERIES… 181 SERIES… These carbide reverse countersinks excel in cutting highly abrasive materials, the “difficult-to-machine” materials* and in cutting any materials where longer tool life is desired. Standard in three flutes with 100º countersink angle.

When ordering please specify: Tool number and included countersink angle. Example: 181-5J-100º 94

These spotfacers excel in cutting highly abrasive materials, the “difficult-to-machine” materials, and in cutting any material where longer tool life is desired. All carbide cutters are supplied with 1/64 corner radius.

CUTTING TOOLS

CARBIDE CUTTING TOOLS 700 SERIES

730 SERIES

755 SERIES

3N1™ DRILL POINT COUNTERSINKS

PART N UM SHOW BERS N ARE FOR C ARBID E

PILOTED COUNTERSINKS

AIRCRAFT HOLE SAWS

COMPOSITE TOOLS Shearbore Carbide Drills FOR USE IN KEVLAR, FIBERGLASS, BORON, PLASTIC, CARBON & OTHER HIGHLY ABRASIVE MATERIALS

COMPOSITE TOOLS Polycrystalline Diamond/C.B.N. Special Rotary Cutting Tools and Plated Diamond Special Rotary Cutting Tools

100

EVERSINKS

EverSinks are the world’s most complete replaceable insert countersink system. The integral pilot design allows for simple insert mounting that permits a repeatable relationship between the countersink and the fillet radius in one operation. Other attributes include: • Carbide and PCD tipped insert configurations available. • 100° and 130° bodies standard; other angles quoted on request. • Cam lock and screw down insert types available. • All standard fillet radii available. Double angle chamfer inserts also available. • Single and two flute configurations available. Note: 2 flute bodies must have at least .150 (3.8mm) pilot. • Removable pilot bodies available for .125 (3.2mm) hole diameters and larger. • Eversink bodies are made from wear resistant heat treated tool steel.

Cam-Lock Eversink Numbering System

101501 or 101501-L Cam Pin

C’ SINK ANGLE 8 = 82° 9 = 90° 1 = 100° 3 = 130°

6 1 8 7 0 1 BODY DIA. 6 = 5/8 7 = 3/4 8 = 7/8 9 = 1”

PILOT DIA. (middle 4 digits)

Add “DS” for bodies using a radius or double-chamfer PCD tipped insert Add “D” for bodies using a straight PCD tipped insert

19035 Insert Screw

2-Flute Bolt-On Eversink Numbering System C’ SINK ANGLE 8 = 82° 9 = 90° 1 = 100° 3 = 130°

2 FLUTES

2 – 6 1 8 7 0 1 BODY DIA. 6 = 5/8 7 = 3/4 8 = 7/8 9 = 1”

PILOT DIA. (middle 4 digits)

Add “D” for bodies using a straight, radius or doublechamfer PCD tipped insert

Eversink Insert Numbering System INSERT STYLE IB = BOLT ON IC = CAM LOCK IX = “X” STYLE

C’ SINK ANGLE 8 = 82° 9 = 90° 1 = 100° 3 = 130°

Add “DC” for any PCD tipped insert

I B 6 1 R 015 BODY DIA. 6 = 5/8” 7 = 3/4, 7/8 & 1”

INSERT TYPE R = RADIUS C = CHAMFER S = STRAIGHT

RAIDUS, CHAMFER ANGLE or “000” for STRAIGHT INSERTS

101

SEALANT GUNS AIR OPERATED SEALANT GUN KITS

Model

Capacity Oz.

Handle Type

950-25 A

2 1/2

PALM

950-25 HA

2 1/2

PISTOL

950-60 A

PALM

950-60 HA

PISTOL

950-120 A

PALM

950-120 HA

PISTOL

NOTE: Tool includes one cartridge, plunger & retainer. Order air hoses seperately.

Model 12053A 2-1/2 oz...................... Model 12054A 6 oz...................... Model 12055A 12 oz.......................... All kits include an air hose, pistol grip gun, six cartridges, plunger, caps and a selection of nozzles. NOTE: Must specify type of airline connector

AIR OPERATED SEALANT GUN Operate on air line pressures from 5 to 150 p.s.i. The 950 Series Sealant Guns are manufactured from the highest quality materials to assure long life and easy, dependable operation. Gun bodies and handles are made of durable, lightweight aluminum. The corrosion resistant retainers are made of a special high strength steel to prevent a cartridge splitting under high pressures. To load, simply turn the knob and disengage the retainer. Insert the filled cartridge, replace the retainer with cartridge and then tighten the knob. To operate, simply pull the trigger to open the air valve. Air enters through the valve and forces the plunger down the inside of the cartridge displacing material out of the nozzle. The result is a smooth uniform flow of material applied exactly where you want it. Each gun includes one retainer, cartridge and plunger.

Hose Assemblies 250 Retainers All Semco retainers are 100 psi pressure rated and designed for use with Semco guns, cartridges, and dispensing systems.

All hose assemblies come with a B-nut fitting to attach to the Semco gun or equipment and the specified quick disconnect attachment

Description Description

Part Number

1 oz. 2.5 oz. 6 oz. 8 oz. 12 oz.

231611 220256 220928 220926 220923

Part Number

5 ft. Aro hose assembly 10 ft. Aro hose assembly 5 ft. Hansen hose assembly 10 ft. Hansen hose assembly 5 ft. Schrader hose assembly 10 ft. Schrader hose assembly

280012 280013 280000 280001 280006 280007

HOSE CONNECTORS

MANUAL SEALANT GUN The manual gun has a smooth pluger rod. A simple touch on the lever releases pressure instead of difficult twisting and turning of the rod. Since there are no rod notches, you can dispense any amount of material. Threaded collar holds cartridge. Gun does not include cartridge or nozzle. Two models have different rod lengths for different size cartridges.

102

MODEL 1832-6 for 2-1/2 and 6 ounce cartridges... MODEL 1832-12 for 12 ounce cartridges............... MODEL 12050 - Includes 1832-6 manual gun, assorted nozzles and six 2-1/2 oz. cartridges........ MODEL 12051 - Includes 1832-6 manual gun, assorted nozzles and six 6 oz. cartridges.............. MODEL 12052 - Includes 1832-12 manual gun, assorted nozzles and six 12 oz. cartridges............

ARO HANSEN SCHRADER Hose Assy. Hose Assy. Hose Assy.

COMPLETE LINE OF VIRGIN POLYETHYLENE NOZZLES, CARTRIDGES AND ACCESSORIES

Valve Protector #1859-3 ............. 103

HAND TOOLS

104

PLATE NUT DRILL JIG

MANY OTHER SIZES AVAILABLE

105

ULTRALITE NUTPLATE DRILLMOTORS The Spacematic ULTRALITE® Nutplate Drill Motor II is a pneumatic portable hand held tool that drills and countersinks the two rivet holes which are subsequently used to mount various types of nutplates. The tool is completely automatic in that operation consists of inserting the colletmandrel assembly into the pre-drilled pilot hole and activating the trigger. The collet-mandrel assembly grips the work piece, holding the tool securely while both drill-countersincks are simultaneously rotated and advanced into the work piece under controlled feed conditions. When both drill-countersinks have reached their pre-set depth, releasing the trigger completes the cycle.

hi-shear C O R P O R A T I O N

One hand operation to locate, drill and countersink both rivet holes in a single 4 second operation. Tool is easily converted from one rivet hole spacing to another by interchanging the foot attachments and spindle spacer block. Specifications Drill stroke length: Available spindle speeds: Feed rate range: Motor power: Maximum air consumption: Collet stroke length: Weight:

0.500 inches 600 and 7,000 RPM 0.001 to 0.012 inches per rev. 0.54 HP 18 CFM at 90 PSI 0.250 inch 4.75 lbs.

OPTIONS All Spacematic Nutplate Drill Motor IIs have the VARIABLE SELECTION feature of completely interchangeable, standard foot assemblies, spacer blocks, collet-mandrels, spindle assemblies, drills and RPM gear changes. These options configure a given tool to have drill-countersink capacity for producing the rivet mounting holes for 234 different types (sizes) of nutplates.

NUTPLATE DRILLS HIGH SPEED AND COBALT NPD DRILL COUNTER SINKS for Nutplate Drillmotors

Series No. NPD40 NPDS40 NPD30 NPDS30 NPD21 NPDS21

Body and C Sink Dia. .187 .250 .250 .313 .313 .375

Drill Dia. .098 .098 .1285 1285 .159 .159

Length Dash No. -25* -35 -50

“L” Dim .295 .420 .560

WHEN ORDERING SPECIFY Series No. – C’Sink Angle–Length Dash No. 2.490

10-32 or 8-32

106

“L” C’ Sink Angle

Body Dia.

Drill Dia.

EXAMPLE: NPD40–100–35–8 Standard NPD40 drill countersink made of M2 H.S. steel is used for drilling aluminum and mild steel. add prefix M3 if cutters are to be used for drilling hard steel.

HANDTOOLS HAND SEAMER Wide, deep jaws machined for smooth paralled fit. Forms precise folds and seams. Throat 1” deep x 3 1/2” wide.

# 44

ALUMINUM SNIPS

OFFSET SNIPS

ADEL HAND NIBBLING TOOL # 81… # 81A (replacement Punch)…. • • • • •

Hand Operated Cuts Sheet Metal Like a Punch & Die Ideal for Templets, Shims & Radio Chasis Capacity 186Ga Alum 7 oz.

CAMLOC PLIER

# M12A… (12” 0.A.L., 1 Lb.)

# M14A… (14” 0.A.L., 1.5 Lb.)

Superior quality. Heavy duty snips are only 1/3 the weight of steel types and give many more years of service. Comfortable, sleek contour aluminum handles have reinforcing ribs to duplicate the strength of steel. Handles will not spring when cutting heavy gauges of sheet metal. Inlaid blades are supreme cutlery grade moly steel, electronically heat treated and tempered for continuous use. Precision ground, beveled cutting edges stay sharp longer and make pattern and circle cutting an easy job.

• Strong & lightweight with inlaid steel blades • Resharpenable blades that replace easily when necessary • Metallic gray, black enamel finish

Cutting Application Number

20 SL 20 SR

Grips

Length

Net wt.

red

9”

15 oz.

green

9”

15.oz

Snips cuts sharp left angle, straight line, and 5” dia. left circles Snips cuts sharp right angle, straight line, and 5” dia. Right circles

WISS AVIATION SNIPS M1R Left cut… red grips M2R Right cut… green grips M3R Straight cut… yellow grips Made in USA

PLIERS # 4P3…

# AAT508K Cannon Connector, non-sparking, high-strength zinc aluminum alloy, slip-joint handle, replaceable serrated plastic jaws.

VISE-GRIP 10R 7R 10CR 7CR 10WR 7WR 5WR 4WR 9LN 6LN 4LN 6R 11R 18R 24R 4SP 6SP 11SP 24SP 506QC 512QC 518QC 524QC

10” 7” 10” 7” 10” 7” 5” 4” 9” 6” 4” 6” 11” 8” 24” 4” 6” 11” 24” 6” 12” 18” 24”

Straight Jaw Locking Pliers Straight Jaw Locking Pliers Curved Jaw Locking Pliers Curved Jaw Locking Pliers Curved Jaw Locking Pliers w/Cutter Curved Jaw Locking Pliers w/Cutter Curved Jaw Locking Pliers w/Cutter Curved Jaw Locking Pliers w/Cutter Long Nose Locking Pliers Long Nose Locking Pliers Long Nose Locking Pliers Locking “C” Clamp Pliers Locking “C” Clamp Pliers Locking “C” Clamp Pliers Locking “C” Clamp Pliers Locking Clamp w/Swivel Pads Locking Clamp w/Swivel Pads Locking Clamp w/Swivel Pads Locking Clamp w/Swivel Pads Quick Change Bar Clamp/Spreader Quick Change Bar Clamp/Spreader Quick Change Bar Clamp/Spreader Quick Change Bar Clamp/Spreader 107

HANDTOOLS 37° ROL-AIR® FLARING TOOL

TUBE BENDERS (Lever Type)

#507FB…………………… Flares and burnishes 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing Flare soft copper, aluminum and brass. Faceted, hard chrome finished cone rolls out perfect 37° flares above die block—then automatically burnishes flare face. Original wall thickness maintained at base of flare Slip-on yoke permits use in tight quarters. Heat treated dies grip tubing without scoring.

For Bending Annealed Copper, Aluminum, Steel, Stainless Steel and Hard Copper Tubing of Bending Temper (including K Types, L and ACR).

LEVER-TYPE BENDERS Each tool bends one size. Open side type which slips over tube at any point. Makes smooth short radius bends up to 180°with minimum effort. No marking, scraping or flattening of tubing. Calibrated to show angle of bend. Wide hook grips tubing securely. New fixed hook tube benders furnished for 1/4 to 1/2” O.D. sizes have easy 90° start – require much less effort to make fast, accurate bends. Wide fixed hook simplifies operation, holds tubing securely. Each tool bends only one size Outside Radius To Weight Diameter Nominal Center of Catalog Each Tube of tubing Size Number 364–FHB–04 364–FHB–05 364–FHB–06 364–FHB–07 364–FHB–08 364–FHA–10

1/4 5/16 3/8 7/16 1/2 5/8

3/16 11/14 14/16 1-1/2 1-1/2 2-1/4

1/8 – 1/4 – 3/8 1/2

Three-in-one tool: plier, twister, and cutter. Used on wire sizes .060 or less. Grips wire into 30 slip-proof angle. One-hand operation. 10” O.A.L

(With Spring Return)

#68……………………….….. #68B Endbearing………….

STAINLESS STEEL AIRCRAFT SAFETY WIRE

For 1/8” to 1-1/8” Tubing TC1000………….……….…..

1 lb. 1-1/8 lbs 1-3/4 lbs. 3-1/2 lbs. 3-1/2 lbs. 5-1/2 lbs.

SAFETY WIRE TWISTERS

HANDY – CONVENIENT

HEAVY-DUTY TUBE CUTTER

#C32. . . . ( .032 Diameter ) #C41. . . . ( .041 Diameter ) #C21. . . . ( .021 Diameter ) • 1 lb. Spool • 302 MS — 20995–C Stainless Steel Wire ( Conforms to Mill Spec W6713)

PARKER–TYPE BEADING TOOL SET For Beading Tubing 1/4” to 1” Model# AP145

The Parker Beading Tool has been the #1 choice for mechanics for making hose-clamping beads in metal tubes. New enhancements include ground, hardened and polished surfaces for mar-free beads in aluminum, copper, brass and mild steel tubes ranging from 1/4” to 1” diameter. Meets MILSPEC MS33660D and SAE AS5131 standards. Kit contains 1 rubber-jawed vise assembly, 3 beading assembly devices with full range of rollovers.

SAFETY WIRE TWISTER TOOLS PLIERS – Note: Unless otherwise stated, all models feature Right Hand Twist and Diagonal Nose. 6” Manual and Automatic Springs Returns 9W 45W

9W 9WS 11W 11WS 45W

Tapered Nose – Manual Return Tapered Nose – Automatic Return Diagonal (NSN 5120-01-112-5143) Diagonal Nose – Automatic Return Reversible – Automatic Return

1W393 3W5 5W6 41W

Automatic (NSN 5120-01-112-5031) Cushion Throat Left Hand Twist Reversible – Automatic Return

9” Automatic Spring Return 1W393

41W

No. 105W

108

Professional Safety Wiring Kit. Contains three different Twisters to cover almost any application. 9” Automatic, 6” Mini, and a 19” Deep Reach Twister. Includes three 1/4 lb. Spools of stainless steel safety wire (0.020, .032, .040). Durable plastic storage case. Weight: 4lbs. Length: 13-1/2” Width: 10” Height: 2-1/16”

12” Automatic Spring Return

2W393

2W393 Automatic – Diagonal Nose 4W6 Cushion throat 6W4 Left Hand Twist

TigerWave – Unique “wave” jaw design eliminates cuts and nicks in wire 25W 26W

– automatic Spring Returns 6” TigerWave – Reversible 9” TigerWave – Reversible

BURRAWAY DEBURRING TOOLS TYPE B-STRAIGHT SHANK

BURRAWAY TOOL

Feed In

TYPE A - 1/4” SHANK All dimensions shown in inches. For “COMPLETE TOOL” add “YA” BEFORE HOLE SIZE. For “REPLACEMENT BLADE ONLY” ADD “DA” BEFORE BLADE SIZE.

HOLE SIZE REPLACEMENT P/N (YB-) DEC. EQUIV. DIM.”A” DIM.”B” DIM.”C” BLADE P/N(DB-) YB-7/32 .218 4.50 .87 .56 DB-#1 YB-15/64 .234 4.50 .87 .56 DB-#1 YB-1/4 .250 4.50 .87 .56 DB-#1 YB-17/64 .265 4.50 .87 .56 DB-#1 YB-9/32 .281 4.50 .87 .56 DB-#1 YB-19/64 .296 4.50 .96 .68 DB-#2 YB-5/16 .312 4.50 .96 .68 DB-#2 YB-21/64 .328 4.50 .96 .68 DB-#2 YB-11/32 .343 4.50 .96 .68 DB-#2 YB-23/64 .359 5 1.00 .68 DB-#3 YB-3/8 .375 5 1.00 .68 DB-#3 YB-25/64 .390 5 1.00 .68 DB-#3 YB-13/32 .406 5 1.00 .68 DB-#3 YB-27/64 .421 5.50 1.09 .72 DB-#3-1/2 YB-7/16 .437 5.50 1.09 .72 DB-#3-1/2 YB-29/64 .453 5.50 1.09 .72 DB-#3-1/2 YB-15/32 .468 5.50 1.09 .72 DB-#3-1/2 YB-31/64 .484 5.50 1.09 .72 DB-#3-1/2 YB-1/2 .500 5.50 1.09 .72 DB-#3-1/2

Feed Thru

HOLE SIZE REPLACEMENT P/N (YA-) DEC. EQUIV. DIM.”A” DIM.”B” DIM.”C” BLADE P/N(DA-) YA-3/32 .093 3.37 .45 .28 DA-3/32 YA-7/64 .109 3.37 .45 .28 DA-3/32 YA-1/8 .125 3.37 .45 .25 DA-1/8 YA-9/64 .140 3.37 .45 .25 DA-1/8 YA-5/32 .156 3.37 .45 .25 DA-5/32 YA-11/64 .171 3.37 .45 .25 DA-5/32 YA-3/16 .187 4.12 .72 .44 DA-3/16 YA-13/64 .203 4.12 .72 .44 DA-3/16 The tool deburrs automatically, requiring no judgment or secondary operation on part of the worker. It reduces deburring to a simple one-step operation. working with equal ease and efficiency in deburring the back of holes which is inaccessible with conventional types of tools. One simple set screw adjustment controls depth of cut. BURRAWAY DETAILS

All dimensions shown in inches. For “COMPLETE TOOL” ADD “YB-” BEFORE HOLE SIZE. ‘For “REPLACEMENT BLADE ONLY” ADD “DB-” BEFORE BLADE SIZE.

Feed Out

ARBOR ASSEMBLY

ADAPTER ASSEMBLY

TYPE A TOOL ADJUSTMENT SCREW

SPRING ASSEMBLY PLUNGER

PIVOT PIN

BLADE

INTEGRAL PILOT & ARBOR

“DA-” Replacement Blade

SPRING

“DB-” Replacement Blade

TYPE B TOOL

KIT CONTENTS (CONTINUED):

BURRAWAY DEBURRING TOOL KIT

1/4” Tool & Replacement Blade All Tools & Blades housed in a fitted plastic case.

Complete Kit Part #70938...

Contains 5 Tools & Replacement Blades housed in a fitted case. Individual tools are available.

KIT INCLUDES THE FOLLOWING: 1/8” Tool & Replacement Blade 5/32” Tool & Replacement Blade 3/16” Tool & Replacement Blade 7/32” Tool & Replacement Blade

BURR-OFF TOOLS The original “clothes-Pin” tool for mass production hole deburring. For removal of burrs from front and back of holes. Adaptable to high production, automatic and automated operations.

TOOL NUMBER CP-6 CP-7 CP-8 CP-9 CP-10 CP-11 CP-12 CP-13 CP-14 CP-15 CP-16 CP-17 CP-18 CP-19 CP-20 CP-21 CP-22

RANGE OF HOLE SIZES IN. MM .093-.109 2.36-2.77 .109-.125 2.77-3.17 .125-.140 3.17-3.55 .140-.156 3.55-3.96 .156-.172 3.96-4.36 .172-.187 4.36-4.74 .187-.203 4.74-5.15 .203-.219 5.15-5-56 .219-.234 5.56-5.94 .234-.250 5.94-6.35 .250-.266 6.35-6.75 .266-.281 6.75-7.13 .281-.297 7.13-7.54 .297-.313 7.54-7.95 .313-.328 7.95-8.33 .328-.343 8.33-8.71 .343-.359 8.71-9.11

SHANK DIAMETER IN. .092 .108 .124 .139 .155 .171 .186 .202 .218 .233 .249 .265 .280 .296 .312 .327 .342

OVERALL LENGTH IN. 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00

Each tool size will effectively deburr all hole sizes in the range as shown. The BURR-OFF® is a simple onepiece construction. All BURR-OFFs (except CP-6 thru CP-9) come equipped with a sliding tension-adjustment feature to control the amount of “edge-break”. TOOL NUMBER CP-23 CP-24 CP-25 CP-26 CP-27 CP-28 CP-29 CP-30 CP-31 CP-32 CP-33 CP-34 CP-35 CP-36 CP-37 CP-38

RANGE OF HOLE SIZES IN. MM .359-.375 9.11-9.52 .375-.390 9.52-9.90 .390-.406 9.90-10.31 .406-.422 10.31-10.71 .422-.437 10.71-11.09 .437-.453 11.09-11.50 .453-.468 11.50-11.88 .468-.484 11.88-12.29 .484-.500 12.29-12.70 .500-.515 12.70-13.08 .515-.531 13.08-13.48 .531-.547 13.48-13.89 .547-.563 13.89-14.30 .563-.578 14.30-14.68 .578-.594 14.68-15.08 .594-.609 15.08-15.46

SHANK DIAMETER IN. .358 .374 .389 .405 .420 .436 .452 .467 .483 .499 .514 .530 .545 .562 .577 .593

OVERALL LENGTH IN. 4.00 4.43 4.43 4.43 4.43 5.50 5.50 5.50 5.50 7.00 7.00 7.00 7.00 7.50 7.50 7.50

109

DEBURRING TOOLS

110

DEBURRING SYSTEMS & KITS

Roto-Drive Standard Set

Includes the following: • Plastic Roto-Drive Handle • 1/8" Countersink • 1/4" Countersink

DESCRIPTION

Roto-Drive Standard Set

Royal Roto-Drive Combination Set

• 5/16" Countersink • 3/8" Countersink • Demo Plate • Plastic Storage Case PACKAGE OF

CATALOG NUMBER

22500

Includes the following: • Plastic Roto-Drive Handle • 1/8" Countersink • 3/8" Countersink • E-100 Blade DESCRIPTION

Roto-Drive Combination Set

• E-200 Blade • E-300 Blade • Demo Plate • Plastic Storage Case

PACKAGE OF

CATALOG NUMBER

22502

111

HAND INSTALLATION & EXTRACTING TOOLS INCH SERIES COARSE NOMINAL THREAD SIZE 2-56 3-48 4-40 5-40 6-32 8-32 10-24 12-24 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8 1-1/8-7 1-1/4-7 1-3/8-6 1-1/2-6

INSTALLATION TOOL PART NO. IM51-02 IM51-03 IM288-04 IM288-05 IM288-06 IM288-2 IM288-3 IM288-1 IM288-4 IM288-5 IM288-6 IM288-7 IM288-8 IM288-9 IM288-10 IM288-12 IM288-14 IM288-16 IM288-18 IM288-20 IM288-22 IM288-24

NOMINAL THREAD SIZE 3-56 4-48 6-40 8-36 10-32 12-28 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 5/8-18 3/4-16 7/8-14 1-14 1-12 1-1/8-12 1-1/4-12 1-3/8-12 1-1/2-12

INSTALLATION TOOL PART NO.

TYPE 1 1 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3

INSERTING TOOL PART NO. HT551-02 HT551-03 HT551-04 HT551-05 HT551-06 HT551-2 HT551-3 HT551-1 HT551-4 HT551-5 HT551-6 HT551-7 HT551-8

TYPE 2 2 2 2 2 2 2 2 2 2 2 2 2

TANG BREAK- EXTRACTING TOOL OFF TOOL PART NO. PART NO. EX227-02 TB695-02 EX227-06 TB695-02 EX227-06 TB695-04 EX227-06 TB695-04 EX227-06 TB695-06 EX227-06 TB695-2 EX227-6 TB695-3 EX227-6 TB695-3 EX227-6 TB695-4 EX227-6 TB695-5 EX227-6 TB695-6 EX227-16 TB695-7 EX227-16 TB695-8 EX227-16 * EX227-16 * EX227-16 * EX227-16 * EX227-16 * EX227-24 * EX227-24 * EX227-24 * EX227-24 *

GO & NO GAGES (COMPLETE) 3B 2B GA688-02 GA440-02 GA688-31 GA440-31 GA688-04 GA440-04 GA688-05 GA440-05 GA688-06 GA440-06 GA688-2 GA440-2 GA688-3 GA440-3 GA688-1 GA440-1 GA688-4 GA440-4 GA688-5 GA440-5 GA688-6 GA440-6 GA688-7 GA440-7 GA688-8 GA440-8 GA688-9 GA440-9 GA688-10 GA440-10 GA688-12 GA440-12 GA688-14 GA440-14 GA688-16 GA440-16 GA688-18 GA440-18 GA688-20 GA440-20 GA688-22 GA440-22 GA688-24 GA440-24

FINE TYPE

IM299-3

IM299-4 IM299-5 IM299-6 IM299-7 IM299-8 IM299-9 IM299-10 IM299-12

6 6 6 6 6 6 6 4

INSERTING TOOL PART NO. HT552-03 HT552-04 HT552-06 HT552-2 HT552-3 HT552-1 HT552-4 HT552-5 HT552-6 HT552-7 HT552-8 HT35-9 HT35-10 HT35-12 HT35-14 HT35-16 HT35-161 HT35-18 HT35-20 HT35-22 HT35-24

TYPE 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4

GO & NO GO GAGES S.T.I. Thread plug gages are used to check the accuracy of the tapped hole. If the tapped hole is correct, the finished thread will also be accurate when the insert is installed. It is not necessary to gage the installed insert.

112

TANG BREAK- EXTRACTING GO & NO GAGES TOOL OFF TOOL (COMPLETE) PART NO. PART NO. 3B 2B EX227-06 TB695-02 GA694-03 GA441-03 EX227-06 TB695-04 GA694-04 GA441-04 EX227-06 TB695-06 GA694-06 GA441-06 EX227-06 TB695-2 GA694-2 GA441-2 EX227-6 TB695-3 GA694-3 GA441-3 EX227-6 TB695-3 GA694-1 GA441-1 EX227-6 TB695-3 GA694-4 GA441-4 EX227-6 TB695-4 GA694-5 GA441-5 EX227-6 TB695-6 GA694-6 GA441-6 EX227-16 TB695-7 GA694-7 GA441-7 EX227-16 TB695-8 GA694-8 GA441-8 EX227-16 GA694-9 GA441-9 * EX227-16 GA694-10 GA441-10 * EX227-16 GA694-12 GA441-12 * EX227-16 GA694-14 GA441-14 * EX227-16 GA694-16 GA441-16 * EX227-16 GA694-161 GA441-161 * EX227-24 GA694-18 GA441-18 * EX227-24 GA694-20 GA441-20 * EX227-24 GA694-22 GA441-22 * EX227-24 GA694-24 GA441-24 *

EXTRACTING TOOL This tool is used to remove inserts. Apply the tool to the insert, striking the head of the tool lightly turning it counterclockwise, maintaining steady downward pressure.

Inserts are supplied in coarse and fine threads. Type 2, Type 4 and Type 6 TOOLING are used for finer pitch inserts, which are larger in the free state than the coarse pitch inserts. They have to be “prewound” to a smaller diameter for installation. Type1, Type 3 and Type 5 TOOLING (threaded mandrel) is used for coarse pitch inserts.

TYPE 1 INSTALLATION TOOL Threaded Mandrel (SIZES 2-56 and 3-58)

TYPE 2 HAND INSERTING TOOL (Prewinder Tool)

TYPE 3 INSTALLATION TOOL (Threaded Mandrel)

TYPE 4 NON-CAPTIVE PREWINDER

TYPE 5 INSTALLATION TOOL (Threaded Mandrel)

TYPE 6 INSTALLATION TOOL (Threaded Mandrel with Prewinder)

*use standard needle nose pliers to remove tangs on this size insert.

TANG BREAK-OFF TOOL This tool is used to remove the driving tang of inserts after they have been installed to eliminate their interference with the end of the assembled bolt. The operation of the tool is automatic, having a spring loaded punch that strikes a sharp blow against the tang of the installed insert.

TYPE THREAD REPAIR KITS Individually-packaged kits are available for inch coarse and fine series sizes from 4-40 to 1-1/2-12. Each kit contains everything you need to complete a thread repair: drill, tap, installation tool, and a quantity of Stainless Steel Inserts.

THREAD REPAIR KITS INCH SERIES

INCH COARSE THREAD REPAIR KITS KIT CONTENTS AND REPLACEMENT PARTS THREAD SIZE + LENGTH 4-40 x .168 5-40 x .188 6-32 x .207 8-32 x .246 10-24 x .285 12-24 x .324 1/4-20 x .375 5/16-18 x .469 3/8-16 x .562 7/16-14 x .656 1/2-13 x .750 9/16-12 x .844 5/8-11 x .938 3/4-10 x 1.125 7/8-9 x 1.312 1-8 x 1.500 1-1/8-7 x 1.688 1-1/4-7 x 1.875 1-3/8-6 x 2.062 1-1/2-6 x 2.250

KIT P/N IK401-04D IK401-05D IK401-06D IK401-2D IK401-3D IK401-1D IK401-4D IK401-5D IK401-6D IK401-7D IK401-8D IK401-9D IK401-10D IK401-12D IK521-14D IK521-16D IK521-18D IK521-20D IK521-22D IK521-24D

INSERTS PER KIT 12 12 12 12 12 12 12 12 12 12 12 6 6 4 6 6 5 4 4 4

TAP P/N TP04-CPB TP05-CPB TP06-CPB TP2-CPB TP3-CPB TP1-CPB TP4-CPB TP5-CPB TP6-CPB TP7-CPB TP8-CPB TP9-CPB TP10-CPB TP12-CPB TP14-CPB TP16-CPB TP18-CPB TP20-CPB TP22-CPB TP24-CPB

INSTALLATION TOOL P/N TYPE IM288-04 5 IM288-05 5 IM288-06 5 IM288-2 5 IM288-3 5 IM288-1 5 IM288-4 5 IM288-5 5 IM288-6 5 IM288-7 5 IM288-8 5 IM288-9 5 IM288-10 5 IM288-12 5 IM288-14 5 IM288-16 5 IM288-18 3 IM288-20 3 IM288-22 3 IM288-24 3

PACKAGE INSERT P/N PK185-04 PK185-05 PK185-06 PK185-2 PK185-3 PK185-1 PK185-4 PK185-5 PK185-6 PK185-7 PK185-8 PK185-9 PK185-10 PK185-12 PK185-14 PK185-16 PK185-18 PK185-20 PK185-22 PK185-24

INSERT QUANTITY 12 12 12 12 12 12 12 12 12 12 12 6 6 6 1 1 1 1 1 1

DRILL SIZE #31 #29 #25 11/64 13/64 15/64 17/64 21/64 25/64 29/64 17/32 19/32 21/32 25/32 29/32 1-1/32 1-5/32 1-9/32 1-13/32 1-17/32

INCH FINE THREAD REPAIR KITS KIT CONTENTS AND REPLACEMENT PARTS THREAD SIZE + LENGTH 6-40 x .207 8-36 x .246 10-32 x .285 1/4-28 x .375 5/16-24 x .469 3/8-24 x .562 7/16-20 x .656 1/2-20 x .750 9/16-18 x .844 5/8-18 x .938 3/4-16 x 1.125 7/8-14 x 1.312 1-14 x 1.500 1-12 x 1.500 1-1/8-12 x 1.688 1-1/4-12 x 1.875 1-3/8-12 x 2.062 1-1/2-12 x 2.250

KIT P/N IK402-06D IK402--2D IK402-3D IK402-4D IK402-5D IK402-6D IK402-7D IK402-8D IK402-9D IK402-10D IK402-12D IK528-14D IK528-16D IK528-161D IK528-18D IK528-20D IK528-22D IK528-24D

INSERTS PER KIT 12 12 12 12 12 12 12 12 6 6 4 6 6 6 5 4 4 4

TAP P/N TP06-FPB TP2-FPB TP3-FPB TP4-FPB TP5-FPB TP6-FPB TP7-FPB TP8-FPB TP9-FPB TP10-FPB TP12-FPB TP14-FPB TP16-FPB TP161-FPB TP18-FPB TP20-FPB TP22-FPB TP24-FPB

INSTALLATION TOOL P/N TYPE HT552-06 2 HT552-2 2 IM299-3 6 IM299-4 6 IM299-5 6 IM299-6 6 IM299-7 6 IM299-8 6 IM299-9 6 IM299-10 6 IM299-12 6 HT35-14 4 HT35-16 4 HT35-161 4 HT35-18 4 HT35-20 4 HT35-22 4 HT35-24 4

PACKAGE INSERT P/N PK191-06 PK191-2 PK191-3 PK191-4 PK191-5 PK191-6 PK191-7 PK191-8 PK191-9 PK191-10 PK191-12 PK191-14 PK191-18 PK191-16 PK191-18 PK191-20 PK191-22 PK191-24

INSERT QUANTITY 12 12 12 12 12 12 12 12 12 6 6 4 1 1 1 1 1 1

DRILL SIZE #25 #17 13/64 17/64 21/64 25/64 29/64 33/64 37/64 41/64 48/64 57/64 1-1/64 1-1/64 1-5/32 1-9/32 1-13/32 1-17/32

113

TYPE THREAD REPAIR KITS MASTER THREAD REPAIR KITS contain the most commonly used thread sizes all in one!!! Each kit contains a S.T.I. tap, installation tool, and a package of inserts for each size. (Drills sold separately).

MASTER THREAD REPAIR KITS

INCH SERIES COARSE PART NO. IK934 – CONTENTS: THREAD SIZE + LENGTH 1/4-20 x .375 5/16-18 x .469 3/8-16 x .562 7/16-14 x .656 1/2-13 x .750 5/8-11 x .938

TAP P/N TP4-CPB TP5-CPB TP6-CPB TP7-CPB TP8-CPB TP10-CPB

INSTALLATION PACKAGE INSERT DRILL TOOL P/N INSERT P/N QUANTITY SIZE IM288-4 PK185-4 12 17/64 IM288-5 PK185-5 12 21/64 IM288-6 PK185-6 12 25/64 IM288-7 PK185-7 12 29/64 IM288-8 PK185-8 12 17/32 IM288-10 PK185-10 6 21/32

METRIC SERIES PART NO. IK937 – 150: THREAD SIZE + INSTALLATION PACKAGE TAP INSERT DRILL LENGTH TOOL P/N P/N INSERT P/N QUANTITY SIZE M5 X 0.8 X 7.5 IM747-5 TP5M-CPA PK084-5 12 13/64 M6 X 1.0 X 9.0 IM747-6 TP6M-CPA PK084-6 12 1/4 M8 X 1.25 X 12.0 TP8M-CPA IM747-8 PK084-8 12 21/64 M10 X 1.5 X 15.0 TP10M-CPA IM747-10 PK084-10 12 13/32

FINE PART NO. IK936 – CONTENTS: THREAD SIZE + LENGTH 10-32 X .285 1/4-28 X .375 5/16-24 X .469 3/8-24 X .562 7/16-20 X .686 1/2-20 X .750

TAP P/N TP3-FPB TP4-FPB TP5-FPB TP6-FPB TP7-FPB TP8-FPB

PART NO. IK937 – IK937-125: THREAD SIZE + LENGTH M5 X 0.8 X 7.5 M6 X 1.0 X 9.0 M8 X 1.25 X 12.0 M10 X 1.25 X 15.0

INSTALLATION PACKAGE INSERT DRILL TOOL P/N INSERT P/N QUANTITY SIZE IM299-3 PK191-3 12 13/64 IM299-4 PK191-4 12 17/64 IM299-5 PK191-5 12 21/64 IM299-6 PK191-6 12 25/64 IM299-7 PK191-7 12 29/64 IM299-8 PK191-8 12 33/64

INSTALLATION PACKAGE INSERT DRILL TAP INSERT P/N QUANTITY SIZE TOOL P/N P/N PK084-5 IM747-5 12 TP5M-CPA 13/64 PK084-6 IM747-6 12 TP6M-CPA 1/4 PK084-8 IM747-8 12 TP8M-CPA 21/64 TP10M-MPA IM747-10-1 PK335-10 12 13/32

METRIC COARSE THREAD REPAIR KITS KIT CONTENTS AND REPLACEMENT PARTS THREAD SIZE + LENGTH M3 X 0.5 X 4.5 M3.5 X 0.6 X 5.3 M4 X 0.7 X 6.0 M5 X 0.8 X 7.5 M6 X 1.0 X 9.0 M7 X 1.0 X 10.5 M8 X 1.25 X 12.0 M9 X 1.25 X 13.5 M10 X 1.5 X 15.0 M11 X 1.5 X 16.5 M12 X 1.75 X 18.0 M14 X 2 X 21.0 M16 X 2 X 24.0 M18 X 2.5 X 27.0 M20 X 2.5 X 30.0

KIT P/N IK403-3D IK403-3.5D IK403-4D IK403-5D IK403-6D IK403-7D IK403-8D IK403-9D IK403-10D IK403-11D IK403-12D IK403-14D IK403-16D IK403-18D IK403-20D

INSERTS INSTALLATION TAP PER TOOL P/N P/N KIT TYPE IM747-3 TP3M-CPA 12 6 HT751-3.5 TP3.5M-CPA 12 2 IM747-4 TP4M-CPA 12 6 IM747-5 TP5M-CPA 12 6 IM747-6 TP6M-CPA 12 6 IM747-7 TP7M-CPA 12 5 IM747-8 TP8M-CPA 12 5 IM747-9 TP9M-CPA 12 5 IM747-10 TP10M-CPA 12 5 IM747-11 TP11M-CPA 12 6 IM747-12 TP12M-CPA 12 5 IM747-14 TP14M-CPA 6 5 IM747-16 TP16M-CPA 6 5 IM747-18 TP18M-CPA 6 5 IM747-20 TP20-CPA 4 5

PACKAGE INSERT INSERT DRILL P/N QUANTITY SIZE PK084-3 12 1/8 PK084-3.5 12 #27 PK084-4 12 11/64 PK084-5 12 13/64 PK084-6 12 1/4 PK084-7 12 9/32 PK084-8 12 21/64 PK084-9 12 3/8 PK084-10 12 13/32 PK084-11 6 29/64 PK084-12 6 31/64 PK084-14 6 37/64 PK084-16 6 21/32 PK084-18 6 47/64 PK084-20 4 13/16

TYPE 2

TYPE 3

KIT CONTENTS AND REPLACEMENT PARTS THREAD SIZE + LENGTH M8 X 1.0 X 12.0 M10 X 1.0 X 15.0 M10 X 1.25 X 15.0 M11 X 1.0 X 16.5 M11 X 1.25 X 16.5 M12 X 1.25 X 18.0 M12 X 1.5 X 18.0 M14 X 1.5 X 21.0 M16 X 1.5 X 24.0 M18 X 1.5 X 27.0

114

KIT P/N IK404-8D IK404-10D IK405-10D IK404-11D IK405-11D IK405-12D IK406-12D IK406-14D IK406-16D IK406-18D

INSERTS INSTALLATION TAP PER TOOL P/N P/N KIT TYPE IM835-8 TP8M-FPA 12 6 IM835-10 TP10M-FPA 12 6 TP10M-MPA IM640-10-1 12 6 IM640-11-1 TP11M-FPA 12 6 IM640-11 TP11M-MPA 12 6 IM640-12 TP12M-FPA 12 6 IM973-12 TP12M-MPA 12 6 IM973-14 TP14M-FPA 6 6 IM973-16 TP16M-FPA 6 6 IM973-18 TP18M-FPA 5 6

PACKAGE INSERT P/N PK255-8 PK255-10 PK355-10 PK255-11 PK355-11 PK255-12 PK355-12 PK355-14 PK355-16 PK355-18

INSERT QUANTITY 12 12 12 12 12 12 12 6 6 5

DRILL SIZE 21/64 13/32 13/32 7/16 29/64 31/64 31/64 9/16 21/32 23/32

TAP

INSTALLATION TOOLS

TYPE 5

INSERTS

METRIC COARSE THREAD REPAIR KITS

DRILL

TYPE 6

SWAGING MACHINES

type II beanch model manual swagging tool kit â€“ part no. M2-k*

115

SWAGING EQUIPMENT PORTABLE CABLE SWAGER KIT AT 520JK........................

AT 520J SWAGER This light-weight portable unit is designed to precision swage cable terminals…even when used by operators with no previous experience. It can be used as a bench unit when mounted on the shock absorbing base or taken directly to the scene of operation. Dies are for standard MS Sleeve Type and Ball End Terminals. Cut-off trim dies are manufactured in sizes to cut cable up to 1/4” in diameter without fraying or crushing wire strands. The kit is furnished with swager and all dies (1/16-3/16).

SWAGED CABLE TERMINAL PULL TESTER KIT AT 520CTK........................ The AT 520CTK Portable Cable Pull Tester Kit is used in conjunction with the AT 520D and AT 520J Cable Swagers. It has been designed as a portable unit to enable Field Service Groups, Aircraft Manufacturers and Repair depots to test swaged terminals COMPLETE KIT CONSISTS OF THE FOLLOWING: AT 520 CT

116

AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT

520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520 520

CTB CTD-1 CTD-2 CTD-3 CTD-4 CTD-5 CTD-6 CTD-7 CTD-8 CTF-5 CTF-6 CTF-7 CTF-8 CTS-2 CTS-3 CTS-4 CTS-5 CTS-6

Swaged Terminal Pull Tester Complete with Handle and Jaw Holder Carrying Case Block Jaws for 1/16” dia. cable “ “ 3/32” “ “ “ “ 1/8 ” “ “ “ “ 5/32” “ “ “ “ 3/16” “ “ “ “ 7/32” “ “ “ “ 1/4 ” “ “ Adapter for 5/32 AN 667 Terminal Adapter for 3/16 AN 667 Terminal Adapter for 7/32 AN 667 Terminal Adapter for 1/4 AN 667 Terminal Adapter for 1/16 AN 663 & AN 664 Terminals Adapter for 3/32 AN 663 & AN 664 Terminals Adapter for 1/8 AN 663 & AN 664 Terminals Adapter for 5/32 AN 663 & AN 664 Terminals Adapter for 3/16 AN 663 & AN 664 Terminals

AT 520CT PULL TESTER AT AT AT AT AT AT AT AT AT AT AT AT AT AT AT

520 520 520 520 520 520 520 520 520 520 520 520 520 520 520

CTT-2 CTT-3 CTT-4 CTT-4 CTT-6 CTT-7 CTT-20 CTT-30 CTT-40 CTT-60 CTT-70 CTP-1 CTP-2 CTP-3 CTP-4

Adapter for 1/16 AN 666 Adapter for 3/32 AN 666 Adapter for 1/8 AN 666 Adapter for 5/32 AN 666 Adapter for 3/16 AN 666 Adapter for 7/32 AN 666 Adapter for 1/16 AN 666 Adapter for 3/32 AN 666 Adapter for 1/8 & 5/32 Adapter for 3/16 AN 666 Adapter for 7/32 & 1/4 Pin 3/16 Dia. ) Pin 1/4 Dia. ) Pin 5/16 Dia. ) Pin 3/8 Dia. )

& & & & & & & & ” & ”

AN 669 Terminals (R.H. TA’D) AN 669 Terminals (R.H. TA’D) AN 669 Terminals (R.H. TA’D) AN 669 Terminals (R.H. TA’D) AN 669 Terminals (R.H. TA’D) AN 669 Terminals (R.H. TA’D) AN 669 Terminals (L.H. TA’D) AN 669 Terminals (L.H. TA’D) ” ” ” ” ” ” AN 669 Terminals (L.H. TA’D) ” ” ” ” ” ” For AN 667 & AN 668 Terminals

JOBOLT – VISU-LOK TOOLS

117

HI-LOK / HI-SHEAR AIR DRIVERS hi-shear C O R P O R A T I O N

118

HI-LOK / HI-SHEAR AIR DRIVERS hi-shear C O R P O R A T I O N

119

HI-LOK / HI-SHEAR AIR DRIVERS hi-shear C O R P O R A T I O N

120

HI-LOK / HI-SHEAR AIR DRIVERS

hi-shear C O R P O R A T I O N

121

HI-LOK/HI-LITE TYPE TOOLS

122

ROLLER RATCHET®

For Hi-Loks® and Limited Access

10.

14.

15.

16.

18.

19.

Roller Ratchet® 1. RR40S-SP Standard, "Short" Reversible Roller Ratchet® with through-hole. Has 1/4" male square drive with compression ring for socket retention. (150 lb-in rating) 3. RR40A (size) S-SP This series Roller Ratchet® is very low profile with integral (one-piece spindle) socket. The sockets are shallow for Hi-Lok® installation in low height spaces. (150 lb-in rating) Available individually or in sets of 6. 4. RR40SP Standard "Long" Reversible Roller Ratchet® with throughhole. Has 1/4" male square drive with compression ring for socket retention. (150 lb-in rating) 5. RR2E40SP Double-Ended Reversible version of "Long" Roller Ratchet®. Eliminates need to reverse the spindle to go from installation to removal. 1/4" square drive with through-hole and compression ring for socket retention. (150 lb-in rating) 6. RR2E40S-SP Double-Ended Reversible version of "Short" Roller Ratchet®. Eliminates need to reverse the spindle to go from installation to removal. 1/4" square drive with through-hole and compression ring for socket retention. (150 lb-in rating) 14. RR80SP Taller than the RR40SP tool, but more torque. Has 1/4" male square drive with compression ring for socket retention. (150 lb-in rating) 15. RR130A (size) SP series wrenches have Integral Sockets, a larger diameter clutch, and low height, but provide additional torque capability - 250 lb-in. 16. RR130SP Larger clutch provides 250 lb-in rating with 1/4" square drive. 18. RR250SP 3/8" Square-Drive Roller Ratchet® with through-hole, and 400 lb-in rating. 19. RR400SP 3/8" Square Drive Roller Ratchet® with through-hole, and 600 lb-in rating. This is our largest Roller Ratchet®

Roller Ratchet® Square Drive Max Torque Part Number or Socket Hex lb-in RR40SP 1/4” 150 RR40S-SP 1/4” 150 RR80SP 1/4” 200 RR130SP 1/4” 250 RR250SP 3/8” 400 RR400SP 3/8” 600 RR40A21SP 7/32” 150 RR40A21S-SP 7/32” 150 RR40A25SP 1/4” 150 RR40A25S-SP 1/4” 150 RR40A28SP 9/32” 150 RR40A28S-SP 9/32” 150 RR40A31SP 5/16” 150 RR40A31S-SP 5/16’ 150 RR40A34SP 11/32’ 150 RR40A34S-SP 11/32” 150 RR40A37SP 3/8” 150 RR40A37S-SP 3/8’ 150 RR130A25 1/4” 250 RR130A31 5/16” 250 RR130A34 11/32” 250 RR130A37 3/8” 250 RR130A43 7/16” 250 RR25OA50 1/2” 400 RR2E40SP 1/4” 150 RR2E40S-SP 1/4” 150 RR2E13O 1/4” 250 RR2E250 3/8” 400 RR2E400 3/8” 600

OAL 6” 3.5” 6-1/4” 7” 7-3/4” 8-1/2” 6” 3.5” 6” 3.5” 6” 3.5” 6” 3.5” 6” 3.5” 6” 3.5” 7” 7” 7” 7” 7” 7-3/4” 7” 4.5” 7” 7-3/4” 8-1/2”

HEAD HEAD WIDTH HEIGHT 5/8” .5” 5/8” .5” .60” 1.0” 7/8” .6” 1” .62” 1.3” .75” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 5/8” 1/2” 7/8” .6” 7/8” .6” 7/8” .6” 7/8” .6” 7/8” .6” 1” 5/8” 5/8” 1/2” 5/8” 1/2” 7/8” .6” 1” 5/8” 1.3” .75”

123

HI-LOK/HI-LITE GAGES 2-612 Grip Scale

The original and best instrument for measuring both hole depth and fastener grip. The scale is spring temper stainless steel and 3/4” x 6-1/4” in size.The finish is satin with red and black lettering.

Scale for measuring depth of hole. Graduated in 1/16” increments to 3”. Scale for measuring grip length of fasteners graduated in 1/16” increments to 3”.

The 2-1522 Hi-Lok Protrusion Gages offer a convenient method to check Hi-Lok pin protrusion limits after the Hi-Lok pin has been inserted in the hole and before or after collar installation. Individual gages accommodate Hi-Lok pin diameter sizes 5/32, 3/16, 1/4, 5/16, and 3/8. Gages are made of .012 stainless steel and are assembled as a set on a key chain.

2-1522 Protrusion Gages Stainless Steel with Black Copy

SCALE FOR MEASURING GRIP LENGTH OF FASTENERS. GRADUATED IN MILLIMETER INCREMENTS TO 7-1/2 CENTIMETERS. SCALE FOR MEASURING DEPTH OF HOLE. GRADUATED IN MILLIMETER INCREMENTS TO 7-1/2 CENTIMETERS.

ZHP-100 HI-LOK® PLIERS Hi-Lok® Removal Pliers offer a quick and inexpensive alternative for removing any frangible hex collar such as Hi-Lok, Hi-Lite, Hi-Tigue, Veri-Lite and C-Lok fasteners. The hardened steel jaws are specially designed to maximize the gripping surface around the collar. This allows the ZHP-100 pliers to grip 5/32”, 3/16”, 1/4” and 5/16” fastener sizes.

PART NUMBER

Hi-Lite (Inches) Includes gages for 5/32”, 3/16”, 1/4”, 5/16” and 3/8” pin diameters

2-1522HST (Stainless Steel with red copy)

* Hi-Lite (Metric) Includes gages for 4, 5, 6, 8, 10 & 12mm pin diameters Hi-Lok/Hi-Tigue (Metric) Includes gages for 4, 5, 6, 8, 10 & 12mm pin diameters

For non-Interference fit holes, the ZHP-100 removal pliers should be used in conjunction with a hex key. The Notched jaws are designed for

GAGE SET DESCRIPTION

2-1522HSTM (Stainless Steel with green copy) 2-1522HLM (Stainless Steel with purple copy)

maximum gripping from the top or bottom of the offset pliers head.

TESTING EQUIPMENT PROPELLER PROTRACTOR Universal propeller protractor is a device used to measure the propeller blade angle at a specific blade station, also to determine if the propeller is properly adjusted. The blade angle is referenced from the propeller plane of rotation, which is ninety degrees to the crank shaft centerline. The frame of the protractor is made of aluminum and has three sides which are ninety degrees to each other. Also includes a swing out level located in lower corner to assist in deter-mining proper vertical line. #2113.......................

AIRCRAFT CABLE GAUGES

Digital Propeller Protractor Instant measurements of level, angle and tilt, with digital display. A thousand times easier to use over the old method. Features include: Sizes 5-1/2”x3”. Alternate reference feature for quick and accurate measurement of deviations from reference surface.Hold button freezes the display angle. V grooves insure accurate reading on curved surfaces: 9V battery. #5490 ................................

CONTROL CABLE TENSIOMETER

#BT 33-75D For use on cables 1/16”, 3/32”, 1/8” diameter. Tension range 15-70 lbs. #BT 33-75-G For use on cables 5/32”, 3/16”, 1/8” diameter. Tension range 50-350 lbs. #BT 33-75-H For use on 1/4” cable. Tension range 50-350 lbs.

124

#C 8: 0-200 lbs. 1/16 - 1/4 cable . . . . #C 9: 150-450 lbs. 1/8 - 1/4 cable . . . . .

Small lightweight precision instrument. Accuracy is not affected by extreme heat or cold. Gauge pointer has lock feature to allow holding of reading. Chart converting reading to pounds of tension enclosed. Range in pounds 15-150. Cable sizes: 1/16”, 3/32”, 5/32”, 3/16”, 7/32”, 1/4”, Wt. 12 oz. #T5 ..............................

MISCELLANEOUS Siphon Spray Gun

#702 ................................ • High flow Applications • Designed for Spraying Solvents, Soaps, etc. • 8’ Clear Plastic Suction Tubing • 6” Nose Extension • Pistol Grip Style • 15 oz.

MASTER HEAT GUN HG501A Adjustable Bench Top Base Heat Range: 500ºF-750ºF 14 AMPS. 120V

Available 220V...

HG751B Heat Range: 750ºF-1000ºF 14.5 Amps, 120V........

ARO MARKING PEN

One–Quart Professional Spray Gun and Cup

FEATURES • Completely dependable • Built to perform year after year at top efficiency • Large air passages • Provides constantly uniform finishes

• Comfortable, easy-to-use tool for engraving products or tooling for identification. • Ideal for marking welds for identification. • Can be used to scribe a line on glass for cutting. • Cutting of fine, medium, or coarse marking point.

No Cost Options • 39862-1 Fine Point • 39862-3 Coarse Point To order, specify Model 8315 w/option number

SPECIFICATIONS • Air Inlet

1/4” NPS

MODEL

• Air Cons

9-11.5 CFM

8315

• Fluid Inlet

3/8” NPS

• Air Pressure

50 PSI

THROTTLE TYPE

STANDARD POINT

LENGTH in.

Twist

Medium

6.4

AIR SCRIBE

#AS7A

AIR FILE FP705 Reciprocating air file makes filing in confined spaces easy. Includes flat, round, triangular and bastard cut files. 1/4” stroke length makes quick work of metal removal.

Bold Type indicates popular stock models

CP-9361

Air Scribe

AIR FILE ACCESSORIES

CP-9361-1

Air Scribe kit

(Not Shown) FP 5679 3 pk. mill cut FP 5680 3 pk. round single cut FP 5681 3 pk. triangular single cut FP 5682 3 pk. flat bastard cut FP 5683 Set of 4 assorted files

GASKET SCRAPER FP703............. Rear-exhausted tool makes short work of removing dried-out gasket material. Won’t damage underlying surface. Lever throttle provides precise speed control. Straight-handle design helps make this tool easy to hold and use - great for tight spaces under hood. Features a lightweight aluminum housing and durable steel blade.

Catalog Number

Description

CP-9361-1 AIR SCRIBE KIT INCLUDES 4 CHISELS AND 2 STYLI:

Overall length in. (mm)

Net Weight oz. (kg)

5 (127)

5 (14)

STANDARD EQUIPMENT: (1) Stylus, hose and strainer

Applications: Writes as easily as a ballpoint pen on a variety of materials such as steel and other metals, plastic, glass, and wood. Can also be converted to a light scaler or hammer for deburring, trimming, peening or driving pins.

15Z-710 Air Marking Pen 15Z-720 Air Marking Pen Kit

Dotco®

Simplified in-line piston motor with only two moving parts for longer trouble-free operation. 20,000 strokes per minute variable speed. Suitable for making a variety of materials from aluminum to titanium. Air consumption less than 1 CFM. Integral air strainer prevents air line contamination. Sliding sleeve throttle for positive power control: accurate speed selection. Lightweight: weighs only 4 ounces for operator comfort. Compact design with contoured nose piece for better maneuverability and easier handling. Easily replaceable, long lasting carbide tipped stylus. 15Z-720 Air Marking Pen Kit includes: 15Z-710 Air Marking Pen; 5 foot 3/16” I.D. Hose Assembly with 1/8” and 1/4” NPT fittings: Two (2) 1/2” Wrenches; Carrying Case.

125

ABRASIVE BLASTING EQUIPMENT Dee-Blast Abrasive Blast Systems are dry cleaning, finishing and polishing systems for use with most common abrasives, including glass beads, aluminum oxide, garnet, walnut shells, etc. An exterior on-off switch controls the exhaust fan and lighting. Cabinet is sealed at windows, door openings, and at bottom of hopper where media is discharged. Internal gun system is designed to produce various finishes, fine to coarse. Cabinet operates under negative pressure. Blast system is venturi type. Through the design of the gun system, the air picks up the media through a tube inserted into the media and blasts it through the nozzle.

FLOOR MODELS ABRASIVSES

50lb. bags

GLASS BEADS (Coarse, medium or fine) ALUMINUM OXIDE SILICA SAND

MODEL 2030 MODEL MODEL 38 MODEL 44 60” Overall Height 60” 60” 30” Exterior Width (Front) 38” 44” 20” Exterior Depth (Side) 24” 30” 11” Door Height 11” 16”B 12”F 16” Door Width 20” 27” 71⁄2”x171⁄2” Window Size 71⁄2”x171⁄2” 71⁄2”x171⁄2” Interior Lighting* 1 – 200W 1 – 200W 2 – 200W Exhaust Fan – RPM 1 @ 3010 2 @ 3010 2 @ 3010 Electricity 115V 115V 115V Filter Bags** 1 2 2 Shipping Weight 145# 165# 220# Price *Extended Service Bulbs ** Bag Size: 21” x 35” F.O.B. MICHIGAN ALL PRICES INCLUDE DUST COLLECTION SYSTEM

Bench Model 19 The Model 19 is a sturdy welded steel cabinet. It is a self- contained unit operating on 115V alternating current and connects into your present air supply. The Model 19 will accept and recirculate most popular blast media. The unit is equipped with an internal blasting gun that controls air flow. (Carbide nozzles are available). F.O.B. MICH. Specifications: Overall height 24”, Exterior width 19”, Exterior depth 15”, Top opening 171⁄2” x 13”

MODEL 50 76” 44” 44” 39” 32” 71⁄2”x171⁄2” 1 – 200W 3 @ 3010 115V 3 575#

CYCLO AERO POLISHER Developed for the aircraft industry, the Cyclo Wonder Tool is government approved for the high exacting demands of cleaning and polishing. It is used by most major airlines and aircraft manufacturers and will polish any surface–flat, curved, concave or convex without gouging, marring or burning, as a rotary polisher may do. Leaves no swirl marks, gives a beautifully polished finish. Even a beginner can do a professional job quickly, easily, safely. Also used as a swirl free sander, scrubber, stripper and cleaner. No. 5 (Electric) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 5C (Electric) 230V/50HZ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 11A(Air). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #2002 Polishing Bonnets Wool Pile. . . . . . . . . . . . . . . . . . . . . . . #2005 Applying Polish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #2006 Deoxidizing & Compounding (Remove Paint). . . . . . . . .

AIR SPOT BLASTER MODEL 130 PORTABLE SAND BLASTING SYSTEM Hopper 201⁄2”x91⁄2” dia. drum holds up to 65 lbs. of abrasive. Comes complete with 10 ft. hose, blast gun, and full length face shield. F.O.B. MICH. 126

with four nozzles #R201........................... For doing small touch-ups or cleaning around rivet holes, etc. Blasting material is recycled in the closed system and is used many times over, no ventilation required. Leaves a perfect etched surface for filing, painting, etc.

SHEET METAL MACHINERY AND SHEARS Sheet Metal Brake

16 Gauge Metal Shears

Bends up to 22-gauge metals. Two models to choose from, both all-steel welded construction with bronze bushings, plastic hand grips. SPECIFICATIONS Model S48 Capacity 22-gauge Maximum Bending Length 48-1/2” Flange Full Length 3/8” Maximum Lift of Beam 7/8” Minimum Reverse Bend 5/16” Finger Width ___ Maximum Depth of Box 0-1/8” Shipping Weight 210#

Model U48 Mild Steel 48-1/4” 3/8” 7/8” 5/16” 2”, 3”, 4” 0-1/8” 280#

F.O.B. FACTORY Heavy-duty 16 Gauge Box and Pan Brake Weight: 500 lbs. Bending Length: 48” Finger Width: 2”, 3”, 4” Model “U4816............ Floor Stand NS48.............. F.O.B. Factory

Slip Rolls

Strong on features, these shears offer precision shearing at its best. Simple to operate, ideal for shearing mild steel through 16 gauge as well as plastic, lead, zinc, aluminum, brass and copper. Highly accurate cuts insured by use of a double locking 25-1/2" back gauge. Protractor gauges, graduated side gauges, and front squaring arms are standard. A rugged frame, tool steel blades, quality workmanship, and outstanding design techniques combine to provide a useful tool with a long dependable life. Safety features include positive pedal stops, "full vision" finger guard and front arm extensions. SPECIFICATIONS Model 36” 16 Gauge Capacity Mild Steel Maximum Cutting Length 37-5/8” Back Gauge Range 25-1/2” Approximate Shipping Weight 700# Overall Length 44-1/2” Overall Width Incl. Gauges 73-1/2” Width Less Gauges 27” Overall Height 41”

Model 52” 16 Gauge Mild Steel 52-1/2” 25-1/2” 1100# 59-1/2” 73-1/2” 36” 41” F.O.B. Factory

TENNSMITH slip rolls are ideal for the tool room, sheet metal shops, and school training programs. Simple to adjust and operate, they are manufactured with many exceptional features including rolls, accurate circle settings and wire grooves. SPECIFICATIONS Model Model SR 24” SR 36” Slip Roll 24” 36” Maximum Forming Width 24” 36” Material Capacity 20 Gauge 22 Gauge Diameter of Rolls 2” 2” Minimum Radius 1” 1” Net Weight 140# 183#

Model SR 48” 48” 48” 16 Gauge 3” 775#

Floor Stand Stand Weight

SR 24FS 94#

SR 36FS 120#

SR 48FS 270#

F.O.B. Factory

127

SHEET METAL MACHINERY ERCO Model 1447-6DT foot operated

SHEET METAL SHRINKING AND STRETCHING MACHINE

BEVERLY Throatless Shear Beverly Throatless Shears are ideal all-purpose metal cutting tools because they permit any desired cut in heavy gauges, yet handle lighter metals without distortion. Unique shoulder design allows work to be turned in any position during the cut. Geared rack and pinion makes heavy metal cutting easy. Upper and lower blades are positioned to provide a clean, knurl-free cut, regardless of material, All models equipped with high carbon, high chrome blades. F.O.B. Chicago, IL Capacities

Weight Height overall Height less handle Handle Width Depth Length Blades

B-1 B-2 14 Gauge 10 Gauge mild: 18 mild: 14 gauge gauge stainless stainless

SPECIFICATIONS Model 1447-6DT Capacity maximum metal Thickness of 70,000 PSI tensile . . . . . . . . . . . .5/64 in. Depth of throat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 in. Distance from floor to working surface jaws . . 43-1/4 in. Stroke of ram . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4 in. Overall Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 in. Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 in. Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 in. Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330 lbs. Shipping Weight, Crated . . . . . . . . . . . . . . . . . . .430 lbs. Shipping Weight, export boxed . . . . . . . . . . . . . . .510 lbs. Box Dimensions . . . . . . . . . . . . . . . . .20” W x 55” x 29”L

B-3 3/4” Gauge mild: 10 gauge stainless

18 lbs.

35 lbs.

58 lbs.

14” 18” 7” 9” 4-1/4”

15” 24” 9” 10” 4-3/8”

15” 30” 9” 14” 5-5/8”

HANDFORMER MODEL HF80CH

Originally developed for use in the aircraft industry on aluminum parts, the 1447-6DT is now widely used by the entire metal working industry because of its ability to: • Remove wrinkles and fit sections normally formed in presses or drop hammers. • Form rolled, extruded and formed angles and tees. • Produce double curvatures from flat sheets. The machine performs efficiently on most metals. The Model 1447-6DT combines shrinking and stretching capabilities into one unit and provides the following advantages: • Eliminates time consuming hand de-wrinkling and hammering operations. • Eliminates expensive form blocks and special anvils. • Increases work output and reduces operator fatigue. • Eliminates use of special dies or presses in forming various shapes and contours on angles, tees and other sections. • Cold-worked materials results in higher material strengths. • F.O.B. Factory

Portable, Manually operated machine. (includes one set of standard shrinking and stretching jaws) HF80 CH-SHRINKER/STRETCHER . . . . . . . . . . . . . . . . . . . . . HFL70 SP NO-MAR JAWS . . . . . . . . . . . . . . . . . . . . . . . . . . OTHER TOOLING ADDITIONAL . . . . . . . . . . . . . . . . . . . . . . . (Punching, Notching, Pressing Joining) . . . . . . . . . . . . . . . .

TECHNICAL DATA: 69 LBS

SHEET METAL SHRINKER AND STRETCHER CONVERSION ASSEMBLY #908-SH SHRINKER .........................

No. 371

Stainless .059” Light Metal .79”

No. 372

#908-ST STRETCHER.............................

The aircraft repair and modification man, the sheet metal shop, the sign man and the specialist… just can’t afford to be without these efficient tools – small yet powerful. They work and form average metals – including 16 gauge. They shrink and stretch angles down to a 2” to 3” radius. They handle angles as wide as 1” and 6” to 8” deep. A 45 to 1 leverage provides fast powerful action. 128

#3712 METAL SHRINKER PLUS STRETCHER CONVERSIONS ASSEMBLY………………

SHEET METAL PUNCHES – ROTARY MACHINE

#XXMB

#5JRMB Mounting Base

Roll Chart for Rotary Machine Model R-22 Name “A” 1/8” “C” “E” “F” 3/4”

Part Number 22100 22101 22106 22107 22110 22111 22113 22114

Gauge Roll Required Diagram Function 22103

Turning

22103

Burning

22112 22103

Crimping Ogee Beading

129

PORTABLE “LITENING”

TRIPLE-ACTION “LIGHTNING” HOLE PUNCHES

130

CHISEL AND PUNCH KITS

131

FILES – USA MFG FROM THE FINEST TOOL STEEL

Number 993500

132

AIRLINE ACCESSORIES 1/4” ARO TYPE

1/4” FOSTER TYPE

1/4” LINCOLN TYPE

#210 COUPLER (#100)

COUPLER (#184)

COUPLER #1100

#2608 MALE CONNECTOR (#200)

MALE CONNECTOR #1804

MALE CONNECTOR #1109

#2609 FEMALE CONNECTOR (#300)

FEMALE CONNECTOR #1805

FEMALE CONNECTOR #1110

1/4”

1/4” #802 1/4” SPLICER #804 3/8” SPLICER #805 1/2” SPLICER

AIR HOSE WITH 1/4” MALE FITTINGS #3825 . . . 3/8 x 25’ #3850 . . . 3/8 x 50’ #1425 . . . 1/4 x 25’ #1450 . . . 1/4 x 50’

MODEL A 1625

THE ORIGINAL AND ONLY “LITTLE WINDY” AIRVAC ... POWERFUL, AIR-OPERATED VACUUM CLEANER EFFICIENT WET OR DRY PICKUP, ALUMINUM BODY, LIGHTWEIGHT, COMES COMPLETE WITH 5” NOZZLE, ROUND BRUSH AND CREVICE TOOL 20” Extension Tube #A2012 #A1624 Replacement Bag

#903 1/4” HOSE INSERT #906 3/8” HOSE INSERT #909 1/2” HOSE X3/8 NPT

#922 1/4” HOSE INSERT #923 3/8” HOSE INSERT #928 1/2” HOSE INSERT

NEOPRENE AIR HOSE (200–250 P.S.I.)

#43 1/4 ID 5/8 OD PRICE/FT. #64 3/8 ID 3/4 OD PRICE/FT. #84 1/2 ID 7/8 OD PRICE/FT. MINI AIR VACUUM 275 – PLASTIC BODY MM1120-F18 – Aluminum Body

NYLON COIL HOSE

N14-12 N14-25

12’ 25’

COMBINATION FRL’S (Filter, Regulator, Lubricator & Gauge)

C628-2 C628-3 C628-4

• Venturi Type Design • Use in Confined Areas • Pick Up Ferrous & Non–Ferrous Chips, Bolts & Rivets • 18” Clear Flex Tube • 7 oz. #275 – 1910 Replacement Bag

1/4” 3/8” 1/2”

AIR TOOL OIL

SAFETY BLOW GUNS

#600S

FP5830.......... 1/4” In-line oiler

#5800 (qt).................... #ATL128 (Gallon).......... 133

COMPRESSED AIR POWERED VACUUMS

134

SOLD IN PAKS OF 10 PER SIZE PAK OF 50 ASSORTED SIZES 135

A BOEING DEVELOPED LUBRICANT

BOELUBE® MACHINING LUBRICANTS Boelube is recommended for use on titanium, inconel, aluminum, stainless steel, graphite, composites, honeycomb, kevlar, and wood. Boelube can also be used with ferrous and nonferrous metals.

Boelube® is a registered trademark of The Boeing Company. These products represent a family of proprietary lubricants developed through Boeing manufacturing operations and lubricant experience. Boelube is non-corrosive, non-flammable, chemically stable and free of halogens, heavy metals, sulfur, phosphorus, silicone, petroleum or paraffin wax.

Boelube Solids 70200 White / 70201 Pink PRODUCT CODE 70200-00 70200-13 70200-14 70200-40

The application of minute amounts of Boelube, which is consumed in the metalworking process, will greatly improve tool life, surface finish and hole quality.

SIZE 14.5 Oz. Cartridge 1.6 Oz. Push Tube 4 Oz. Block 3.5 Oz. Push Tube

QUANTITY 12 per Box / 24 per Case 100 per Box / 288 per Case 25 per Box / 150 per Case 32 per Box / 192 per Case

Boelube Pastes 70302 Blue (Soft) / 70305 Pink (Hard) / 70307 Blue (Medium) 70307-L 70307-11 70307-12

4 Oz. Jar 5 Lb. Tub 12 Oz. Jar

24 per Box / 150 per case 5 per Case 12 per Box / 36 per Case

Boelube Liquids 70104 Red (100A)

Boelube’s high strength polar lubricating film on the tool reduces friction, thus minimizing heat generation and subsequently the need to remove heat.

70104-04 70104-05 70104-07

Boelube provides superior lubricity when machining materials such as aluminum, titanium and inconel where high quality finish and increases of 200% or more in tool life observed.

1 Gal. Container 5 Gal. Pail 15 Gal. Drum

PAINT CUTTERS Remove Screws without Flaking or Chipping paint! Paint Cutters feature a spring-loaded pilot that centers the cutter over a screw or rivet head. The cutter scribes a perfect circle in the paint, allowing the screw or rivet to be removed with minimal flaking or blistering of the paint surrounding the head. This greatly reduces the need for, and cost of, “touch-up” later.

PART NO. PC900-4 PC900-6 PC900-8 PC900-10 PC900-1/4 PC900K

136

COLOR CODE

DESCRIPTION FOR#4 (3/32”) SCREW OR FOR#6 (1/8”) SCREW OR FOR#8 (5/32”) SCREW OR FOR#10 (3/16”) SCREW OR FOR 1/4” SCREW OR SET OF ALL 5 PAINT CUTTERS

Helps maintain a good cosmetic appearance after the job is done and reduces the chance for wind and moisture to do further damage to costly finishes. Available with 1/4-28 threaded base for use in Micro-stop cages. Color coded for easy size selection.

RIVET RIVET RIVET RIVET RIVET

HEADS HEADS HEADS HEADS HEADS

Silver Copper Black Brass Copper

Aerospace and Sheetmetal Assembly Tooling Specialists Cherry Tooling Huck Tooling All Fast Blind Rivet Tooling RIVET Squeezers and Equipment RIVET SNAPS Rivet Shavers Rivet Removal tools

Clecos and Temporary Fasteners Countersink Cages Countersink Cutters /Counterbores Deburring tools Screw Drivers and Bits Sealant Guns Grip Gauges

Alcoa Hi Lok Tooling Hi Lok Tooling Eddie Bolt Tools Hi Torque Tooling JIFFY Tooling Dotco Tooling

Pneumatic Drills Angle Drills (Pork Chop) Atlas Copco drills Rivnut tooling Hand Tools

Composilok and Visulok Tooling K Fast Tooling NutPlate Spacematic drill Motors NutPlate drill Jigs FTI Cold working fasteners and tooling Helicoil Tooling Lightning hole punches Hole Saws and Spotters Spare Parts

Drill Bits NAS Spec Drill Bits (Threaded) Drill Bushes Drill Collets Drill Stops Drills (Step) and Reamers

Applied Fasteners and Tooling Pty Ltd 2607/100 Harbour Esplanade Docklands Victoria 3008 Australia For more information contact us at our webpage http://www.appliedfastenersandtooling.com

Colin Campbell M. +61 0 498 610 566 P +61 3 99398979 F. +61 3 99398979 E. colin@appliedfastenersandtooling.com