PAKAR GRANDSTAND
TECHNICAL SPECIFICATIONS
Grid Width : 1.800m c/c Wide Bay
Grid Depth : 3.000m c/c Deep Bay
Gradients and Heights Setting ( Riser) : .125mm , .250mm and .375mm (9 deg)(18.5 deg) (26.5 deg)
Seating Bay length : 1.800m (4 x Seats per bay)
Seat Depth : .750mm
Seat pan : .340mm
Seat Spacing : .450mm c/c
Seat Rest : .370mm for Bucket seat
Spacing Between 2 Rows : .350mm for Bucket seat
Load capacity : 5KN/ m
2 2
Dead Load : .025 KN/m
MATERIAL
Seating Truss
Each Truss T4 supports 4 x rows of 4 seats with a .750mm spacing between the rows . The truss is 3.000m long with a hot dip galvanized finish and made with hig h Tensile strength steel tube.
The truss structure is fully welded to produce a rigid framework. The truss frame are inter-locked together horizontally and vertically.
The T4 Truss come in three riser heights: 125mm ( Low), 250mm (Med), 375mm ( High)
Ringlock - Standards - Ledgers - Braces
These are constructed from hot dip galvanized high Tensile steel pipe. The diameters are 48.3mm x 3.2mm wt and 30.5mm x 2mm wt. pipe with wedge locking pins.
Deck Units ( Platforms)
Deck Units ( Platforms) are made of 12mm thick anti slip Phenolic film faced - plywood. The plywood is fixed and supported on 3 x units of steel SHS 40 x 40 x 3mm thick with a hot dip galvanised finish. When installed onto the grandstand truss the deck units is held captive by a cleat on the truss frame and provide a self - interlocking system.
