2022 ACP Catalog

from 2022 ACP Catalog

by ACP International

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Aerial and Pole Marking

Wrap Around Markers

Identify ownership of pipes, cables, inner duct, or tubing with ACP’s maintenance-free wrap around marking products.

• UV-stabilized print

• Permanently coiled

• .011 or .020 calendered vinyl material

• Sizes fit 1 /4" to 4" cables

• Readable from all directions

Part No.

DN32 DN33 DN34 DN35 DN36

Size

2"X 2" 4"X 4" 7"X 7" 10"X 8" 14"X 10"

Description

¼" to ½" diameter cable ½" to 1" diameter cable 1" to 2" diameter cable 2" to 3" diameter cable 3" to 4" diameter cable

Hang Around™ Markers

Quickly identify cables, fiber optic and CATV lines with ACP's UV stabilized Hang Around Marker. The marker is thermoformed to create a permanent coil that will always return to a coiled position.

• Same coiled technology as wrap around markers

• Additional flap hangs down for better visibility

• Printed on both sides

Part No.

DN33HA DN34HA

Size

2"X 6" 3 ½"X 7"

Description

½" x 1" diameter cable 1" x 2" diameter cable

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Aerial and Pole Marking

Adjustable Panel Cable Markers

The Adjustable Panel Cable Marker (APCM) easily attaches, adjusts, and locks to the cable. There are currently more than 1 million of these markers identifying cable in the marketplace.

• Identifiable from the ground

• Single and double-sided options

• Reflective option for better visibility in low light conditions

• Standard colors: orange, yellow

• Custom blended Polytrope material

Strand Cable Markers

The Strand Cable Marker (SSM) attaches to ¼", 3 /8", or ½" strand or cable. It can be attached from ground level using a strand marker attachment tool (#86SMT).

• Identifiable from the ground

• Single and double-sided options

• Reflective option for better visibility in low light conditions

• Standard colors: orange, yellow

• Custom blended Polytrope material

Part No.

APCM4O ACPM4Y

Panel Size

4"X 2" 4"X 2"

Diameter

Fits 3 /8 to 3 /4 adjusted Fits 3 /8 to 3 /4 adjusted

Printable Area

3 3 /4"x 1 3 /4" 3 3 /4"x 1 3 /4"

Available Colors

Orange Yellow

Part No. SSM414O SSM438O SSM412O SSM414Y SSM438Y SSM412Y

Panel Size

4"X 2" 4"X 2" 4"X 2" 4"X 2" 4"X 2" 4"X 2"

Diameter

Fits 1 /4

Fits 3 /8

Fits 1 /2

Fits 1 /4

Fits 3 /8

Fits 1 /2

Printable Area

3 3 /4"x 1 3 /4" 3 3 /4"x 1 3 /4" 3 3 /4"x 1 3 /4" 3 3 /4"x 1 3 /4" 3 3 /4"x 1 3 /4" 3 3 /4"x 1 3 /4"

Available Colors

Orange Orange Orange Yellow Yellow Yellow

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 3

Aerial and Pole Marking

Bracketless Aerial Markers

Save time and money with the all-in-one bracketless aerial marker. There is no need to add plates. Simply use a hammer and ratchet to attached the marker to the integrated square post.

• Plate material is .080" aluminum

• Reflective materials increases visibility

• 1-to-4 digits can be printed on one convenient plate

• Takes up less storage space and costs less to ship

• Assembly time is vastly reduced

Part No. Description

BAM1624 24" wide marker with square post BAM1636 36" wide marker with square post BAM1648 48" wide marker with 2 square posts

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Aerial and Pole Marking

Tana Wire Markers

Mark power, communication, and guy wires at airports, helicopter approach areas, river and canyon crossings, or overhead obstructions at construction sites.

• 20" markers meet FAA specifications

• Comprised of durable, fiberglass construction

• Choose from 12" or 20" markersPart No.

47555 47556

Description

Additional sizes available

12" marker, fits wires up to ¾" outside diameter 20" marker, fits wires up to 1" outside diameter

Identity Pole Tag

Easily locate your utility poles with reflective, bar coded labels from ACP.

• UV-stabilized, digital print for maximum durability

• Can be printed and packaged with consecutive numbers

• Great for identifying pole locations and inventory

• Optional: Includes Bar Code 39 or QR Codes

• Optional: Add reflective sheeting for low light conditions.

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 5

Underground Pipe and Cable Marking

Section View of Flexible Line Marker

Best Option

Part No.

ACP066* ACP072* ACP078* D375

Description

66 inch Line Marker 72 inch Line Marker 78 inch Line Marker Post Driver

*Indicate color: Y-Yellow, OR-Orange, RD-Red, WH-White, BLU-Blue, GR-Green, PUR-Purple, BR-Brown

Flexible Line Markers

Post Driver

Mark fiber optic cables, gas pipelines, petroleum pipelines, electric lines, water lines, sewer lines, and other buried utility lines with this UV-stabilized marker. Flexible Line Markers can also be used as highway delineators, boundary or trail markers.

• Fiberglass composite

• Easy one-person installation with a post driver (PN: D-375)

• Enhanced profile optimizes stability and allows for double-sided decal application

• Resistant to grass fires

• Add non-reflective, multi-color decal to brand your company and show ownership

• Add reflective decal for greater visibility

• Available colors: Orange, White, Yellow, Blue, Brown, Red, Purple

• Choose convenient direct print option, eliminating the need for a decal

Best

Option

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Underground Pipe and Cable Marking

Poly-Dome™ Markers

Use this marker to provide 360º visibility to identify pipelines, fiber optic cables, and other underground utilities.

• Conforms to many Department of Transportation (DOT) regulations

• UV-stabilized, long-lasting print

• Add your company’s logo and contact information

• Made of durable High Density Polyethylene (HDPE) material

Part No.

PD6 PD7 PD8

Description

Poly-Dome, 6 ft. length Poly-Dome, 7 ft. length Poly-Dome, 8 ft. length

Poly-Dome™ or Top Hat Test Stations

Locate cables and protect cathodic protection circuits with the Poly-Dome™ Test station.

• Station includes: terminal configuration, clear Lexan plate, up to 5 terminals included

• Be sure to mention your configuration needs when ordering

• Shorting straps are sold separately

Part No. Description

PDTS* Poly-Dome Test Station THTS* Top Hat Test Station TSS Nickel Plated Shorting Strap * Indicate required height

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 7

Underground Pipe and Cable Marking

Magical Impact Sleeve

Pop-Up Poly-Dome™ Markers

Maintain functionality and integrity of Poly-Dome Markers by reducing damage caused by vehicles or livestock. The Pop-Up Poly-Dome Marker resumes to its original position after repeated impact by vehicles or contact with cattle.

• Kit includes Poly-Dome, Impact Sleeve, 2" x 2" square post, and all hardware

Part No.

PUPD4 PUPD6

Description

Pop-up Poly-Dome, 4 ft. length Pop-up Poly-Dome, 6 ft. length

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Underground Pipe and Cable Marking

Poly-Dome™ Quick Mount

Mount your Poly-Dome quickly and securely with the Poly-Dome Quick Mount Kit and a drive rivet.

• Kit includes: Poly-Dome, sleeve, and drive rivet

• Mounts to standard U-Channel or delineator posts

• Optional: Ask us for a quote on our large inventory of U-Channel posts!

Part No. Description PDQM Poly-Dome™ Quick Mount

Wrap Around Signs and Decals

Identify pipelines, fiber optic cables, and other underground utilities with aluminum Wrap Around Signs that provide 360º visibility.

• Covers up old text due to change in ownership or contact information

• Choose reflective, multi-color Wrap Around Decals for added visibility.

• Optional: Ask us about 3.5” and 4.5” post caps to neatly finish your Wrap Around Signs!

Part No.

WAS6 WAS7 WAS8

Description

Wrap around sign, 6' length Wrap around sign, 7' length Wrap around sign, 8' length

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 9

Signs and Decals

Custom Signs

ACP is capable of producing multi-color signs on a variety of substrates that can be used for route marking, utility identification, and line ownership. OSHA and safety signs are also available with quick lead times.

Custom signs are available in:

• Polyethylene

• Pre-painted aluminum

• Lexan

Made to your specs! Just ask us!

Part No.

SGN412 SGN912 SGN1014 SGN1218 SGN1420 API1175

*Custom sizes available

Description

4" x 12" sign 9" x 12" sign 10" x 14" sign 12" x 18" sign 14" x 20" sign 11 3 /4" round API sign

Large Format Print Signs

Place large format signs in areas where you need to identify facilities, terminals, stations, or river crossings.

• Large signs are comprised of several panels for easy installation

• Single-panel signs are also available in sizes up to 4' x 10'

• Mounting options: Z-Bars or Square Tubing Frames. Ask us for details.

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Signs and Decals

All-in-One Signs

Faded and worn signage can pose safety and personal injury risks. Maintain your OSHA compliance by updating your signs today. This design helps make safety sign development and maintenance easier.

Great for:

• Plant site entrances

• Utility site entrances

• Construction site entrances

• You specify the size and design. We’ll print and ship the sign!

• Reflective background available and recommended

Letter and Number Kits

ACP’s versatile letter and number kits are highly visible and help increase safety. The digit decals can be purchased in packs of 25 or as an entire kit.

• Available in 5 standard sizes

• Individual characters available 25 per pack

• Available in reflective and non-reflective

Part No. Size

DN50* DN55* DN60* DN62* DN65*

/2" x 1 /2" 1 1 /2" x 1" 2" x 1 1 /2" 2 5 /8" x 1 3 /4" 3" x 2 1 /8"

*Indicate background color

Optimum Visibility Packaging

10 ft. or less 30 ft. or less 50 ft. or less 65 ft. or less 75 ft. or less

100 characters per page 25 per poly pack 25 per poly pack 25 per poly pack 25 per poly pack

Custom Decals

• Great for route marking and utility identification and ownership

• Available in reflective and non-reflective sheeting

• Order individual decals to add to flexible line markers

• Optional: Consider decals to update phone numbers, company names, and other information that may be outdated

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 11

Posts and Hardware

Steel Posts: Galvanized U-Channel, Coated U-Channel, and Square Posts. Choose the best steel post for your application:

U-Channel Posts

Our most popular posts, U-Channel, offer unmatched strength and versatility. U-Channel posts make installation quick and easy. They are available galvanized or green. Other colors and lengths are available with order minimums. Just ask us!

• Pre-punched 3 /8" mounting holes on 1" centers

• Quick and easy installation

Part No.

UC10GLV UC10GR UC8GLV UC8GR

Description

10' Post, 2lb/ft, Galvanized 10' Post, 2lb/ft, Green 8' Post, 2lb/ft, Galvanized 8' Post, 2lb/ft, Green

Part No.

DL6.5GLV DL6GR DL6YLW

Description

6.5' Post, 1.12lb/ft, Galvanized 6' Post, 1.12lb/ft, Green 6' Post, 1.12lb/ft, Yellow

*Other sizes and colors available on request.

Square Posts

Use square posts for maximum visibility as they allow for mounting on all four sides. Made from galvanized .14-gauge steel, square posts can be installed in concrete, soil, gravel, and asphalt.

• Unmatched strength and versatility

Part No. Description

03287 8' x 1 3 /4" Square Post 03289 10' x 1 3 /4" Square Post 03212 12' x 1 3 /4" Square Post

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Posts and Hardware

Sign and Post Hardware

Refer to the chart below for a listing of ACP’s most commonly requested hardware. Other sizes and additional hardware are also available. If you don’t see what you’re looking for here contact us, we can get it for you!

Two-In-One Sign Saver BracketsDrive Rivets

Part No.

03137 SS25 SS33 DRAS387806W HDWR2

HDWR2.5

Description

Two-In-One Sign Saver Bracket 2" x 5" .125 aluminum Sign Saver 3" x 3" .080 aluminum Sign Saver Drive Rivets Galvanized hardware set - 1 of each ( 5 /16" x 2" hex bolt, washer, nut, lock-washer for 1.12 lb. post) Galvanized hardware set - 1 of each ( 5 /16" x 2 1 /2" hex bolt, washer, nut, lock-washer for 2 lb. post)

Bolts, Nuts, and Washers

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 13

Cable Tagging Products

Color Tie Tags

Use these colorful tags to make information highly visible and to identify ownership indoors or out. The tag’s 7 /8" x 1 /2" white panel increases visibility of the printed or written message.

• 7

/8" x 1 /8" white panel

• RoHS and REACH compliant

• Preprinted or blank

• Weather-resistant

• Packaging: 10 tags per package; 1 color per package

• Optional: Add a 12-pack of Rain or Shine™ pens to your order! Or ask us to custom print the tags for you.

Part No.

TAG8410 TAG8410CP

Description

Tags - 10 per package Custom Printed Tags - 10 per package

Cable Tags

Use these durable tags to label and identify bundles of cables and wires.

• Choose any color and text combination

• Available Size: 1 3 /4" x 3 5 /8"

• Standard Cable Tag Material: .020 calendered vinyl

• Packaging: 100 tags and 200 8" cable ties per bag

• Optional: Add a 12-pack of Rain or Shine™ pens to your order! Or ask us to custom print the tags for you.

Part No.

CT100 CT150

Description

1 ¾" x 3 7 /8" Cable Tag 1 ¾" x 5 ¾" Cable Tag

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Cable Tagging Products

Best Seller

Coverall Tags

Use these protective tags to label and identify cables and wires.

• Includes a clear self-sealing flap that protects written information

• Standard Colors: Red, Orange, Yellow, Blue, Green, White

• Standard Coverall Tag Material: .020 calendered vinyl

• Preprinted or Blank

• Packaging: 25 tags and 50 8" cable ties per bag

• Optional: Add a 12-pack of Rain or Shine™ pens to your order! Or ask us to custom print the tags for you.

Part No.

Legend

Description

VCT200 (color)

Fiber Optic Cable

2" x 3 ½"

VCT201 (color) VCT202 (color) VCT203R (red)

Telephone Cable Data Cable Power Cable

2" x 3 ½" 2" x 3 ½" 2" x 3 ½"

Blank ID Tags

These versatile tags come in a wide array of colors to help identify cables and wires with your own personal message.

• Standard Tag Material: .020 calendered vinyl

• Packaging: 100 tags (cable ties are sold separately)

• Optional: Add a 12-pack of Rain or Shine™ pens to your order! Or ask us to custom print the tags for you.

Part No. Description

ID225 2" x 2 ½" ID. Tag - .020 calendered vinyl NYTIES 8' long Black Ties in packs of 100 ID225WL Tag with overlay ID225WT Tag with ties

Rain or Shine™ Pens

Write on your cable tagging products with ACP’s proprietary Rain or Shine Pens. These markers, made by Sharpie® Markers especially for ACP, utilize an industrial grade ink for longlasting readability.

• Available Sizes: Fine Point or Extra Fine Point

• Packaging: Sold in packs of 12

Part No.

PTM100 FP PTM100 EFP

Description

Fine Point Marker - 12 pack Extra Fine Point Marker - 12 pack

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 15

Cable Tagging Products

Ground Wire Tags

Use these durable tags to identify ground connections that provide a warning to avoid removal or disconnection.

• Available Size: 1 1 /2" x 3"

• Standard Tag Material: .016 polyethylene

• Packaging: 500 tags per box

• Choose from multiple colors and text

• Optional: Ask us to print these tags with your own custom message.

Part No.

GWTORG GWTGRN

Description

1 ½" x 3" Orange Ground Wire Tag - .016 Poly 1 ½" x 3" Green Ground Wire Tag - .016 Poly

SlipLoc Markers

Made from thermoplastic elastomer (TPE), the SlipLoc Cable Marker (SLM) fits cables up to 5 /16 " diameter, which includes most computer, coaxial, premises telephone, and electric cables. The SlipLoc closes and locks without having to disconnect cables, saving time and costly disconnects. Ideal for tagging and labeling cables on premises.

• Available Sizes: 3 /8" or 1" preprinted

• Standard Colors: Orange or Yellow

• 1" SlipLoc Marker is ideal for identifying cable type or ownership

3/8" SlipLoc Markers 1" SlipLoc Markers

Part No.

Size

Diameter

Printable Area

Available

Colors

Yellow

SLM38Y 3 /8" wide Fits up to 5 /16" (RG 59, 6 and 7)

Preprinted with 0-9 or A-Z

Part No.

Size

Diameter

Printable Area

Available Colors

SLM1O SLM1Y

1" wide 1" wide

Fits up to 5 /16" (RG 59, 6 and 7) Fits up to 5 /16" (RG 59, 6 and 7)

/4" x 1 /4"

Orange Yellow

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Fiber Splice Sleeves

Fiber Splice Protection Sleeves

ACP has manufactured and distributed fiber splice protection sleeves since the company’s inception. These small but important sleeves are used in the fiber optic industry. ACP’s fiber splice sleeves are made in the U.S.A. and have been used all over the world. They work in most fiber splice sleeve ovens.

• Tested and approved

• Works in most splice sleeve ovens

• Tapered ends guarantee that sleeve components will stay intact

• Stainless steel rod fully deburred

• Don’t see what you’re looking for here? Just ask us, we can do special and custom orders to meet your needs!

Since 1986

Part No.

DH160 DH160 Slim DH1S50S DH140 DH140 Slim DH125 Slim

Sold 50 per pack.

Description

Fiber Splice Sleeve, 60 mm Smaller shrunk shrink O.D. to fit Tyco Organizers Protection Sleeve, 2.4 mm diameter (slims) Fiber Splice Sleeve, 40 mm Smaller shrunk size to fit Tyco organizers Fiber Splice Protection Sleeves, 25mm, (slims)

Part No. DH4

Description

4 Fiber Splice Sleeve, 40 mm, 25 per pack Quartz rod strength member

Part No. DH6

Description

12 Fiber Splice Sleeve, 40 mm, 25 per pack Quartz rod strength member

Part No. DH24

Description

24 Fiber Splice Sleeve, 40 mm, 25 per pack Quartz rod strength member

Part No. DHM25

DHM40 DHM50

Description

Micro Sleeve, 25 mm, shrink to fit 1.5 mm O.D., 50 per pack Micro Sleeve, 40 mm, shrink to fit 1.5 mm O.D., 100 per pack Micro Sleeve, 50 mm, shrink to fit 1.45 mm O.D., 100 per pack

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 17

Flush and Street Marking

Crystal Cap™ Markers

Avoid the time-consuming mess of spray paint and stencils. Identify your network with Crystal Cap Urethane Domed Markers. These multi-color markers are printed on .030 vinyl and a polyurethane dome is applied on the top to protect it from scuffs and scratches.

• Great for marking utility lines and potentially dangerous areas when sign posts are not convenient or permissible

• Can withstand years of weather and traffic

• 10-year warranty (does not include snow plow damage)

• Can be applied with Sikaflex ® adhesive (10.3 oz. tube sold separately) or Butyl adhesive pads (sold separately) on smooth surfaces

• Adhesive must be evenly applied so that no liquid can get below the surface of the marker. Sikaflex ® is recommended for rough or bumpy surfaces.

Part No.

CC2 CC23 CC3 CC378 SIKA11 AD*

* Specify size needed

Description

2" round Crystal Cap™ Marker 2"x 3" oval Crystal Cap™ Marker 3" round Crystal Cap™ Marker 3 7 /8" round Crystal Cap™ Marker 10.3 oz. caulk tube Sikaflex ® Peel and stick adhesive disks for easy application

Ask about our customizing options

Storm Drain Markers

Use Storm Drain Markers to educate the public on how to keep water sources clean and free of debris. Storm Drain Markers help promote city and town beautification.

• Prevent water contamination by identifying storm drains

• Can withstand years of weather and traffic

• 10-year warranty

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131

Flush and Street Marking

Concrete Graphics®

Concrete Graphics® is an alternative material for marking underground utilities, pipelines, or storm drains. This proprietary product from ACP is made of conformable aluminum.

• Custom shape-cutting capabilities

• Installation is quick and easy

• Peel and stick

* Visit www.concretegraphics.com for more information

Flush-Mounted Markers

Mark and locate underground buried utilities with Flush-Mounted Markers. Each marker is reverse printed on Lexan. This reverse-print method allows the marker to withstand foot, vehicle, and mower traffic without sustaining damage.

• UV stabilized printing

• Anchors in ground with black, plastic stakes (included) that must be removed by digging

Part No.

FMM6 FMM8 FMM10

Description

6" Diameter Lexan plate with stake 8" Diameter Lexan plate with stake 10" Diameter Lexan plate with stake

Ask about our customizing options

Phone 817-640-0992 • www.acpinternational.com • Fax 817-633-3131 19

Utility Locating

Marking Flags

Mark buried cables and lines to communicate to workers where it may be dangerous to dig. These color coded vinyl flags are durable and can be printed with your company’s information and branding.

• Standard Flag Material: 4 mil vinyl

• Standard Colors: Red, Orange, Yellow, Green, Blue, White

• Preprinted, blank, or custom

• Packaging: 1,000 flags per case

• Choose from 21” or 30” 15.5 gauge steel wire metal staffs

• Also available with plastic staffs

• Optional: Ask us about our Flag Carrier Probe for easier and more efficient flag installation

Part No.

FL21W* FL30W* FL18P* FL24P* ACP300P

Description

4"x 5" Flag with 21" wire staff 4"x 5" Flag with 30" wire staff 4"x 5" Flag with 18" plastic staff 4"x 5" Flag with 24" plastic staff Flag Carrier Probe

*Indicate color: Y-Yellow, O-Orange, R-Red, W-White, BL-Blue, G-Green

Marking Whiskers