Solar Hot Water Adelaide

A Guide on Solar Water Heaters and How It Saves Energy Our world as we know today is heading into an energy crisis, and if not resolved soon enough, we will run out of energy sources to choose from. Fortunately, there is one energy source, which if tapped correctly can easily solve all of our energy issues, and that is; the sun. It practically powers every single living organism on this planet and is the main source of energy for plants.

One way you can curb energy usage is by using solar hot water Adelaide, which you can now get by installing solar heaters on top or outside your homes. The abundance of solar power is quite noticeable in places like Australia, which is known for the amount of sunshine it receives on the regular. Summer temperatures push well past 50 degrees Celsius and heating water is an easy task when temperatures are this high.

Thus, using solar hot water and heaters will help save the unnecessary amounts of electricity or gas required to operate your regular water geyser. The solar heater cannot only fulfil your bathing needs, but the hot water can be used for various other purposes, and with a good heater and tank in place, it can easily provide somewhere around 50-90% of all your daily hot water requirements.

Sometimes they are unable to heat the water to the extent to which you might need; hence, they come pre-equipped with gas and electric booster to help reach the desired temperatures.

There are several types of water heaters which can suit various kinds of households, which means you need to do your research before making a purchase decision. In this guide, we take a look at how you can choose the ideal water heaters for your household.

The first part of a heater system is considering which one will best suit you and there are two options • Thermosiphon: For houses with limited ground space, thermosiphons are the best option. In this system, both the solar collector and storage tank are both located in the roof. The only major issue with this system is the fact that the weight of the tank makes it difficult to put on certain roofs and houses.

• Split system: These are more expensive systems, where the heat collector is located on the roof and the tank is usually underground or on the ground. These systems also require a pump to circulate water between the tank and collector. These are preferred in places with a colder climate, where the tanks can be kept indoors to control heat loss.

The next stage involves you deciding on what type of solar collector is the ideal choice for your household. There are also two types of collectors you can take your pick from namely • Flat plates: These are the cheapest and common type of collector, and to get solar hot water Adelaide and other areas in and around Australia, where the sunlight coming down is a lot these are the best options. They work best when the sun rays directly hit on them and the big downside its susceptibility to breakdown due to frost.

• Evacuated tubes: These are tubes with water pipes running inside them and are surrounded by vacuum. The round surface of the tubes allows rays to hit it perpendicularly and thus making them very efficient. These are more suited to cold climates as they resist frost better.

With these options now clear, you can select from a range of water heaters and see which one will best suit your house. You could also call upon plumbers to help you during the installation process.

ABA Plumbing & GAS Mail US:- info@abaplumbing.com.au Call Us :- 08 8297 7637 Address:- 122 Fredrick Street, Evandale, SA, 5069