AgAir Update Show Guide 2011

19th Annual NAAA Convention Show Guide Supplement

45th Annual NAAA Convention and Exposition

We get it.

You’re used to flying solo. But everyone knows you can’t do it alone.

And neither can NAAA.

Membership matters.

Join NAAA in its efforts to preserve and protect agricultural aviation and your way of life. Call (202) 546-5722 or visit www.agaviation.org to join the cause.

2E

agairupdate.com

membership ad2.indd 1

10/6/11 1:19 PM

Rick Richter, NAAA President Andrew Moore, NAAA Executive Director

From the NAAA

Set your sights on Las Vegas for NAAA’s 2011 Convention Dec. 5–8

by Rick Richter, NAAA President, and Andrew Moore, NAAA Executive Director On behalf of the National Agricultural Aviation Association, we would like to invite all AgAir Update readers to attend NAAA’s 45th Annual Convention & Exposition in Las Vegas. Join us at the Las Vegas Hilton December 5-8 for the most entertaining, extravagant, informative, educational and exciting event in all of global agricultural aviation!

With more than 25 hours of educational programming, 130 exhibitors and 1,000 aerial application professionals, you’ll be in good company when you attend NAAA’s 2011 Convention. NAAA’s Convention is the place to be to stay on top of the latest techniques and technologies, see the latest products and equipment on the market and forge partnerships with vendors and other applicators who can help you professionally.

For a truly all-inclusive experience, stay at the Las Vegas Hilton. The Hilton is NAAA’s headquarters hotel and the site of all 2011 convention activities.

Everything—and we mean everything— takes place within the confines of this spacious hotel, including meetings, social engagements and the trade show itself.

Speaking of trade shows, the world’s largest agricultural aviation trade show just keeps getting larger. A record number of exhibitors participated in NAAA’s last two conventions, and they are pushing the limits again. Whether you plan on upgrading your GPS and GIS hardware and software, are in the market for a new aircraft or simply want to investigate new crop protection products available from different chemical companies, you’ll find what you’re after at NAAA’s 2011 Trade Show.

To keep up on important changes affecting the industry, including

regulations, new application recommendations and manufacturers’ guidelines, as well as advances in aircraft engineering, application technology, crop protection products and more, you need the latest information.

You’ll find it at the 2011 Convention.

Top industry researchers will report on important field research they are conducting to help aerial applicators at the ASABE Technical Session Dec. 5. You will also be able to choose from among 25 hours of educational programming, including special sessions on avgas, the status of NPDES permit requirements, aerial firefighting and helicopters.

Additional sessions cover chemicals, application technology, security, aircraft airframe and engine manufacturing, and more.

NAAA has lined up an impressive roster of speakers to entertain and inform you Looking for direction and guidance?

Then Compaass Rose is for you! New, prospective and low-time ag pilots will have an opportunity to discuss ideas and philosophies about the business, make informed decisions about their future, and interact with some of the industry’s top operators at two Compaass Rose sessions Dec. 4 and Dec. 8, respectively.

In addition, NAAA’s Job Fair Booth is a new addition to the trade show.

New pilots can post their résumés and operators looking for pilots can post job notices. Be sure to stop by Booth 231.

NAAA has lined up an impressive

roster of speakers to entertain and inform you, including SR-71 pilot Brian Shul, futurist Bob Treadway and air medical examiner Dr. Mark Ivey.

Wait until you hear the story of our Kickoff Speaker, Brian Shul. Brian survived a horrific plane crash and battled through a painful recovery period. Not only did he make it back into the cockpit, he went on to scale some of the highest heights ever in the SR-71, the world’s fastest jet. His message about living fearlessly and making the most of each day is sure to strike a chord with everybody in the audience. Be sure to sign up for the Kickoff Breakfast.

You’ll hear from two great speakers at our Dec. 6 General Session. Futurist Bob Treadway will lead a fascinating discussion on the future of agriculture. Dr. Ivey will provide expert advice on a range of pilot health issues, including fatigue and the need for proper sleep.

Our Live Auction is always exciting and fun. It is also the single most important fundraiser for NAAA and WNAAA. Last year’s auction was truly record-breaking, raising $460,000. Whether we’ll hit that figure again remains to be seen, but our auction contributors seem intent on giving it a go. A P&W 985 Piston Engine donated by Tulsa Aircraft Engines and two full-service hot section inspections (HSIs) for a small and large PT6 from Pratt & Whitney Canada highlight a growing list of auction items.

After long convention days, you’ll be ready to unwind, and NAAA can help with that too. We’ve got wall-to-wall receptions, including the Welcome Reception (Dec. 5), Live Auction Reception (Dec. 6), Pratt & Whitney Canada Reception (Dec. 6), GE Aviation “Boot Scootin’ Party” (Dec. 7) and Farewell Reception (Dec. 8). With the exception of the Farewell Reception, these are decidedly informal affairs. Best

of all, they’re open to every attendee. As you can see, there will be no shortage of opportunities to kick back and visit with old friends and make new acquaintances.

The theme of this year’s convention is “Ag Aviation: America’s Winning Hand.” Unfortunately, Mother Nature did not deal a very strong hand to many applicators and growers this year. 2011 tested aerial applicators’ mettle. Ag pilots are a resilient bunch, though. You deserve a reward for making it through what’s been a tough year for operations in many parts of the country. Joining your peers for NAAA’s 45th Annual Convention & Exposition is the perfect present to yourself and a fitting way to begin preparing for the 2012 season.

That’s just a taste of what you’ll find at NAAA’s 45th Annual Convention & Exhibition. You’ll find much more information within these pages and on NAAA’s website at www.agaviation.org.

Please join us for what promises to be an unforgettable week!

Register for NAAA’s 2011 Convention by returning the pre-registration form found in this section or online at www. agaviation.org. You may also register by calling NAAA at 202-546-5722. Look for the convention registration button right on the homepage.

19th Annual NAAA Convention Show Guide

3E

713 Booth

Bill Lavender Publisher, AgAir Update

from the Cockpit

Don’t roll the dice and miss this year’s NAAA convention and exhibition Welcome to AgAir Update’s 19th consecutive show guide, designed exclusively to promote NAAA’s 45th Annual Convention and Exhibition. It is back to Las Vegas this year! Come one, come all and try your luck. Attending NAAA’s Convention and Exhibition is not a gamble and is guaranteed to bring you better luck next year, even for those who “make” their luck.

This year’s NAAA Annual Convention and Exhibition promises to be exceptional. As you read through the pages of AgAir Update’s 2011 NAAA Show Guide, you will discover all the exceptional events scheduled. This includes what exhibitors have planned, as well as the speakers NAAA has lined

4E

agairupdate.com

up for attendees.

If you have not already made your arrangements to attend, it is not too late. You will find registration forms in this show guide. The official dates are December 5 - 8, 2011. You will want to be sure to make your host Hilton Hotel reservations as soon as possible.

Be sure to stop by AgAir Update’s booth #713. I look forward to talking with each of you. Graham has plans that even I am not aware of yet. I’m sure he’ll be shooting videos each day to post on agairupdate.com, as well as distribute in AgAir Update’s special convention eEditions. These eEditions will bring you highlighted coverage of the convention each day, with video interviews and

candid photographs. You’ll want to wave at friends that didn’t make it to the convention! Be sure to bring a smile!

This year also promises a great NAAA auction. Once again, item donations have topped $140,000 in value.

These items include two Hot Section Inspections (HSIs) from P&WC, as well as a newly overhauled R-985 engine from Tulsa Aircraft Engines. Other notable auction items include a Wayne Handley agrobatics course, a P-51D Mustang ride with Tim McPherson, ground adjustable pump fan and brake from Lane Aviation, $15,000 gift certificate toward an engine overhaul from Covington Aircraft Engines and a P-40 Corsair ride from Fighters & Legends, LLC. (I think there may be

a Lifetime AgAir Update subscription included in there somewhere).

There is one last comment that I would like to leave with you and have done so every year in this editorial. Attending an NAAA Convention and Exhibition with an open mind will easily offset the costs by learning new and better ways to operate a flying service or fly a field. You can’t set a monetary value on the networking that takes place during this time. Don’t miss this once a year opportunity.

See ya in Las Vegas in December!

707

Transland

Booth

Transland continues a 50-year tradition of building quality products focused on helping operators improve their profit margins and offering ease of operation. This year, we will be showing some of our latest developments in the fire gate product line. Extensive design and testing has gone into development of these new gateboxes, comments and field test results show vast improvement over other fire gate applications in the market.

Last year we introduced the Quick-Release Boom Hanger Clamps, and this year we have added Stainless Steel Boom Hangers to our line.

Other products you will see at the Transland booth include our new center boom design with a quick-disconnect [QD] cap, and a new strainer design with the QD cap. Transland general manager Roberto Rodriguez says “the QD cap allows operators to clean and change screens with ease, and as with all our other new products, a focus on keeping ground time to a minimum.”

Transland sends out a big thank you to all our customers who continue to support our company and our industry. We are always interested in ways we can improve our products so please feel free to contact us at any time with any suggestions on how we can make improvements to make your life a little bit easier.

To contact us about any of these products or other application needs, call sales manager Anthonie York at 940.687.1100, or email AYork@TranslandLLC.com.

Aluminum Strainer

Center Boom

Aluminum Strainer

Valve

• Spreaders

• Meterates

• Pumps

• Stainless Steel Booms

• Fire Gate Boxes

• Strainers

• Stainless Steel Valves

• Bomb Bay Fire Gate

• Swathmasters

Boxes

Sales@TranslandLLC.com www.TranslandLLC.com 1206 Hatton Road, Suite A, Wichita Falls, TX 76302 Tel: 940-687-1100 • Fax: 940-687-1941 Se Habla Español Call Your Authorized Transland Dealer Today

19th Annual NAAA Convention Show Guide

5E

907

Lane Aviation

Booth

Honesty and integrity for over 66 years Grant Lane, owner and operator of Lane Aviation.

ROSENBERG, TEXAS — Come join Lane Aviation, Inc. at Booth # 907 during NAAA’s Trade Show and Exhibition being held December 5-8, 2011, in Las Vegas, Nevada. We’ll be providing free draft beer and good Texas conversation about sales, service and parts for both new and used Air Tractors. Ask us about our very special convention sale price for the time proven, reliable Lane Aviation spray pump fan and brake combination.

With over 65 years serving the agaviation industry, Lane Aviation prides itself in maintaining a business ethic of honesty and integrity for every facet of the company. We are the #1 Air Tractor distributor for sales, service and support.

Our diversity in ag-aviation, such as our spraying operation that utilizes two AT-502Bs, allows us to know how to best respond to the ag-operator’s needs. We understand the importance of time when there is an AOG situation and make every effort to respond as quickly as possible. Lane Aviation is strategically located near all forms of shipping, including overnight services such as UPS and FedEx, as well as air, rail and sea from Houston. Often times an operator’s problem can only be solved with a visit to his operation by owner, Grant Lane.

This can include delivering or picking up an aircraft, or using a Lane Aviation company plane to fly in a vital part.

When it comes to Air Tractor aircraft sales, Grant Lane’s life long experience in the ag-aviation business has made Lane Aviation the #1 Air Tractor dealer, selling more Air Tractors than anyone else in the world. Lane Aviation was appointed the first Air Tractor dealer in 1974. Since then, beginning with the efforts of the late George Lane, son Grant has continued to provide the best choice of ag-aircraft, helping and advising customers every step of the way in the aircraft buying process. Whether a customer is upgrading his Air Tractor fleet, or making the transition to the Air Tractor or to turbine power, Grant Lane’s experience can be counted on to help make the right buying decision.

Located in Rosenberg, Texas, Lane Air Park (T54), the Lane Aviation maintenance facility can handle every type of Air Tractor aircraft maintenance, as well as most all other ag-planes. This includes annual and routine inspections, major airframe repairs, engine exchanges and out-sourcing major engine repairs. With Air Tractor factory training and FAA-certified A&P and IA mechanics, customers are assured of the highest quality work for their aircraft.

Also located at Lane Air Park is the fully stocked parts division of Lane Aviation.

Not only is it essential to have readily available parts to ship to customers, this extensive parts inventory facilitates repairs made in the maintenance shop.

A one-stop parts division is a key element that assures customers of the best parts

Dona Jorden has been with Lane Aviation for 19 years and is responsible for your parts needs.

Angel Bailey is Office Manager. She handles overall company administrative duties. She has been with Lane Aviation for 15 years.

service for the highest quality repairs.

Simply put, Lane Aviation, Inc. is widely regarded as a “Best Practices” example for the agricultural aviation industry.

Every ag-aviation operator customer can be confident they will receive unparalleled support. Lane Aviation, Inc. is dedicated to providing its customers with the most efficient service possible without compromise to safety and quality.

Visit us in Las Vegas, Booth # 907, near the Air Tractor exhibit.

Tom Perrigue, IA is Lane Aviation's, licensed mechanic.

Lane Electric Brake and Fan Assembly is easy to use, low maintenance, durable, 12/24-volt, with affordable replaceable parts, available in small and large sizes for multiple volumes.

Lane Aviation is a dealer for: • Transland • Air Tractor • Collins Air Conditioner • Hemisphere Air • Onboard Systems • Zee System

• Agrinautics • CP Products • Compro Smoker • Flight Grip • Weath-Aero • Pratt & Whittney

Lane Aviation also provides a wide variety of other aircraft parts such as Whelen, Cleveland, Hartzell, Spraying Systems, etc.

The Lane Aviation group at Lane Air Park, Rosenberg, Texas, waiting to meet all your service and sales needs.

6E

agairupdate.com

Stop by our booth #907 for a cold beverage and ask us about our Convention-Special pricing for the Lane Electric Brake and Fan Assembly.

19th Annual NAAA Convention Show Guide

7E

NAAA 2011 Convention and Exposition events schedule Join NAAA for its 45th Annual Convention & Exposition!

Dec. 5 - 8 • Las Vegas, Nevada Sunday, Dec. 4 9 a.m.–4 p.m.

8 a.m.–4:30 p.m.

12 p.m.–6 p.m.

12 p.m.–4 p.m.

4 p.m.–6 p.m.

4:30 p.m.–6 p.m.

4 p.m.–5:30 p.m.

Pratt & Whitney Canada PT6 Seminar CD Aviation/TPE 331 FAA-Approved IA Refresher Course Registration Open – Convention Center PAASS Program Devleopment Committee WNAAA Board Meeting NAAA Board Meeting Concurrent Session • Compaass Rose

Monday, Dec. 5 7:30 a.m.–6:30 p.m.

8 a.m.–8 p.m.

8 a.m.–9:45 a.m.

10 a.m.–2 p.m.

10 a.m.–2:30 p.m.

10 a.m.–5 p.m.

1 p.m.–8 p.m.

2:45 p.m.–4:15 p.m.

4:30 p.m.–6 p.m.

6:30 p.m.–7:30 p.m.

Registration Open – Convention Center Exhibitor Set-up Kickoff Breakfast – Brian Shul WNAAA Program – Saks Fifth Avenue Offsite Event (RSVP required) ASABE Sessions Canadian AAA Board Meeting (tentative) Exhibitor Set-up Concurrent/Company Sessions • FAA/Security • Pratt & Whitney Canada – Piston Engines • Hemisphere GPS Concurrent/Company Sessions • Chemical Division • Honeywell Engines • AgSync Welcome Reception

Tuesday, Dec. 6 7 a.m.–8:30 a.m. CP Products Breakfast 7:30 a.m.–5:30 p.m. Registration Open 8 a.m.–11:30 a.m. Exhibitor Set-up 8:45 a.m.–9:45 a.m. NAAA Business Meeting 9 a.m.–10:30 a.m. WNAAA Athena Program 10 a.m.–12 p.m.

NAAA General Session 10:30 a.m.–11:30 a.m. Allied Industry Meeting 12 p.m.–6 p.m.

NAAA Trade Show 1 p.m.–3 p.m.

WNAAA President’s Open House 3 p.m.–5 p.m.

NAAREF Board of Directors 5:30 p.m.–7 p.m. Live Auction & Reception 7:30 p.m.

Pratt & Whitney Reception

8E

agairupdate.com

Wednesday, Dec. 7 7:30 a.m.–4 p.m.

7 a.m.–9 a.m.

8 a.m.–9:30 a.m.

9 a.m.–10:30 a.m.

10 a.m.–4 p.m.

11 a.m.–1:30 p.m.

3 p.m.

4 p.m.–8 p.m.

4 p.m.–5:30 p.m.

6:30 p.m.–9:30 p.m.

Registration Open PAASS Presenters Meeting Concurrent/Company Sessions • Pratt & Whiteny Canada – Turbine Engines • NPDES Permits • DuPont Crop Protection WNAAA President’s Awards Breakfast NAAA Trade Show WNAAA Program – Art Tour (offsite event) Silent Auction Closes Exhibitor Tear-Down Concurrent/Company Sessions • Application Technology Division • GE Aviation • Support Division – Fuels GE Aviation “Boot Scootin’ Party”

Thursday, Dec. 8 8 a.m.–6 p.m.

Registration Open 8 a.m.–10 a.m.

Final Freight Move-Out 8 a.m.–9:30 a.m.

Concurrent/Company Sessions

• Air Tractor Inc. 9:45 a.m.–11:15 a.m. Concurrent/Company Sessions

• Thrush Aircraft

• Syngenta 11:30 a.m.–1 p.m. Concurrent/Company Sessions

• Ag-Nav Inc.

• Aerial Firefighters 1:15 p.m.–2:45 p.m. Concurrent/Company Sessions

• Helicopter

• Compaass Rose 5:30 p.m.–6:30 p.m. Farewell Reception 6:30 p.m.

Farewell/Awards Banquet

Events schedule subject to change. Updates are posted regularly at www.agaviation.org. WNAAA events appear in bold blue.

PIM Aviation Insurance 603 The right solution PIM Aviation Insurance is one of the oldest and most experienced aviation insurance providers in the ag industry. Tim Bonnell, Sr., president of PIM, and his team of pilotagents are experts in creative negotiation and problem solving. They’ve been providing customers with access to all available aviation insurance instruments for nearly 30 years.

“We go to great lengths to assess the unique needs of each client while identifying their areas of risk,” says Tim Bonnell, Sr. “We believe our quick responsiveness to client needs sets a benchmark for the competition.”

Located in Wichita, KS, the “Air Capital of the World” and deep in the agricultural heartland, PIM employees live and breathe aviation. They deliver more than 150 years of combined industry experience.

PIM’s pilot-agents are experienced at writing policies to address coverage and territory issues. They issue state certificates accurately and in a timely and efficient manner. They often negotiate programs to help transition new ag pilots into the business and to help ag pilots

transition from piston to turbine aircraft.

“We’re now partnering with life insurance companies that aren’t afraid to provide coverages while you’re operating your aircraft,” says Tim Bonnell, Jr.. “And best of all, we can offer you this protection at competitive rates.”

PIM is a company that recognizes the importance of providing the right insurance solutions and the potential impact it has on an individual or company’s bottom line.

They offer multiple policies to cover a range of exposures based on the unique needs of your operation. Bonnell, Sr. concludes, “With competitive pricing, exceptional service and informed recommendations, PIM will get your wheels up and keep you flying.”

PIM has the capability to insure all of the aerial applicators needs through its “Ag-Pack” ™ program. This includes not only the aircraft hull and liability coverages including chemical liability but also options to purchase property insurance, commercial automobile insurance, mobile equipment, environmental and more.

Service

Hemisphere GPS Satloc Level II Warranty Repair Service GPS Quick Mount For fast, easy antenna mounting on aircraft

Stainless Steel Vacuum Meters

They are as good as it gets! Fast, accurate, safe and clean!

All Products in Stock

A&P AI mechanics for installation, Satloc warranty service Fast turnaround. Fair prices

888-336-3924

Tel: 580-544-3254 • Fax: 580-544-3230 • compfly@ptsi.net For GPS sales and service call Ralph @ 580-517-1912, or Pete @ 580-517-1914.

300 North Cimarron • Boise City, OK 73933

WE DO GOOD WORK!

SaleS

Overhaul

Providing your the best in overhauled engine and airframe accessories, fuel metering units and aircraft propellers. We can issue 8130’s for domestic and international customers. Major distributor for Weldon Pump, Dukes, Inc., Rapco Fleet Support and Kelly Aerospace

First class service to the aircraft industry for more than 40 years!

FAA Approved Repair Station #RV3R829L

Aircraft Accessories Repairs, Sells, Services, Overhauls and Exchanges  Air Conditioning Compressor Drive Motor  Aircraft Heaters  Alcohol Pumps  Alternators  Blower Motors  Carburetors  Controllers  Cowl Flap Motors  De-Ice Distributor Valve

 Electro-Mechanical Linear Actuators  Feathering Pumps  Feathering Valve  Fuel Boost Pumps  Fuel Injectors  Fuel Pumps  Gate Valve  Generators  Governors  Hydraulic Pump

 Hydraulic Power Paks  Induction Vibrator  Inverters  Landing Gear Motors  Magnetos  Manifolds  Motors (AC-DC)  Pressure Relief Valves  Propellers  Regulator and Relief Valves

 Reverse Current Relays  Scavenge Pumps  Single Port Ejector Valve  Starter Generators  Starters  Starter Adapters  Tach Generators  Turbo Chargers  Vacuum Pumps  Waste Gates

Manufacturers  Adel  Aerospace  Aircraft Parts  Air Research  American Bosch  Aro  Beech  Bendix  Bendix Scintilla  Bendix Stromberg  Cessna  Chrysler

 Continental  Delco Remy  Dukes  Dynamic Air  Eastern Industries  Edo Air  Eicor  Electro Mech  Facet  Flortrop  Ford  Garwin

 General Design  General Electric  Globe  Hamilton Standard  Hartman  Hartzell  Jack & Heintz  Janitrol  Jasco  Lamb  Lear Romec  Lear Seigler

 Leece Nevill  Leland  Lycoming  Marvel-Schebler  McCauley  Mitsubishi  NYAB  Pesco  Prestolite  Rajay Rotomaster  Sensenich  Slick

 Stewart-Warner  TRW  Thompson  Titan  Vickers  Weldon  Westinghouse  Woodward

LARgE inVEntORy OF nEw wELdOn PUMPS in StOck 2740 N. Sheridan Road • Tulsa, OK 74115 Richard and Pete Popplewell

800-255-9924 Tel: 918-835-9924 • Fax: 918-835-3681

e-mail: airacc@aircraftaccessoriesofok.com • web site: www.aircraftaccessoriesofok.com

19th Annual NAAA Convention Show Guide

9E

Electronics International

Advance engine monitoring system Electronics International manufactures the most advanced glass panel engine monitoring system available for turboprop aircraft. The MVP-50T system monitors every engine parameter, plus a ton of extras. In addition to the MVP-50T’s seemingly endless ability to monitor and analyze every critical parameter, it also has an onboard annunciator panel.

If any parameter climbs (or drops) out of normal operating ranges, the MVP-50T will alert the pilot visually and audibly.

Systems screen The System Screen offers pilots up-to-the-minute information for auxiliary functions. If one of the functions being monitored on the System Screen exceeds a redline limit or enters a cautionary zone, the MVP-50T will visually and audibly alert the pilot.

Checklists Custom, interactive checklists enhance cockpit safety and help create a paperless cockpit environment. The MVP-50T places a checkmark next

to each checklist entry as you step through each checklist. Checklists can be easily created on a computer and uploaded through the MVP-50T’s USB interface.

Weight and balance calculations Weight and Balance calculations are such a hassle that many pilots frankly don’t perform them as the law requires. The MVP-50T takes the hassle out of the equation by allowing the pilot to input weights into pre-mapped aircraft locations. The result is a page of Weight and Balance information, as well as the associated W&B envelope.

Total fuel management The MVP-50T offers pilots up-to-date fuel management information, including: Fuel Flow, Fuel Used During Flight, Fuel Used Since Last Fill Up, Gallons Per Mile, Fuel to Next Waypoint, Time, Distance and Fuel to Empty and Fuel Remaining.

Technology.

Redefined.

Functions Included * N1 and N2 * Torque * Fuel Pressure * Fuel Level * Fuel Flow * Fuel Used * Fuel to Waypoint * Fuel in Reserve * Fuel Remaining * Miles Per Gallon * Oil Temperature * Oil Pressure * Outside Air Temperature * Volts and Amps

10 E

agairupdate.com

* Up Timer * Down Timer * Clock (Zulu and Local) * Engine Time * Engine Cycles * Voice Warnings * Visual Warnings * Data Recording * Easy USB Interface * Interactive Checklists * Weight and Balance * Help Screen * EI’s World Class Customer Service

* Much, much more!

MVP-50T

Turboprop Engine Analyzer

Contact us today to start saving money!

Electronics International 63296 Powell Butte Hwy Bend, OR 97701 541-318-6060

303

Booth

Prime Turbines

Prime Turbines PT6A engine overhaul: explore the alternatives

Prime Turbines (Prime) offers PT6A engine overhaul services. Engine overhaul complements Prime’s strong list of capabilities, allowing them to offer operators a comprehensive assortment of services for the P&W Canada PT6A Engine Series.

Prime’s PT6A engine overhaul offers operators a variety of options and build specifications to customize the Repair & Overhaul (R&O) process. Being an Independent FAA Authorized Overhaul Facility allows Prime the freedom and opportunity to remain aligned with the interests and objectives most important to the operator. Prime Turbines offers the engine services operators need for today’s ever-changing environment. In challenging economic times like these, aircraft operators turn to experienced, proven shops they can count on to provide top quality service at a fair and affordable

Dallas • Hyannis • Pittsburgh

www.primeturbines.com

price. And with tighter budgetary constraints and greater demands for justification placed on aircraft and engine maintenance, operators need creative ideas to control cost while maintaining quality and reliability.

ENGINE OVERHAUL POWER SECTION ENGINE TESTING HOT SECTION GAS GENERATOR FUEL NOZZLES M.O.R.E. PROGRAM BLEED VALVE

about Prime Turbines Prime Turbines is an independent, FAA authorized and EASA certified repair station, specializing in PWC PT6A Engine R&O services, along with hot section recertification, engine performance testing, power section & gas generator repair, fuel nozzle overhaul/ exchange, and bleed valve overhaul/ exchange service. The company is also an authorized distributor of FAA Parts Manufacturer Approval (“PMA”) parts for PT6 hot sections. Learn more at www. primeturbines.com.

PT6A Repair & Overhaul

LD Blake 870.208.3814 Fax : 870.208.9336

EASA

lblake@primeturbines.com

Isolair Helicopter Systems

408 Booth

Isolair has the system for you For 25 years, ISOLAIR has been manufacturing quality helicopter systems for the fire fighting, forestry and aerial application industries with a broad line of certified and custom helicopter equipment.

ISOLAIR has the system to fit your company’s needs and helicopter; from agricultural spray systems and bucket spreaders to fire fighting systems,

forestry grapples and torches. With competitive pricing, quality, easy to install products, and an ongoing commitment to customer service, we welcome you to contact us. Our knowledgeable sales staff are ready to answer your questions and advise you on the ISOLAIR system that will best meet your company’s requirements.

firefighting above and beyond.

For 25 years, ISOLAIR has been manufacturing quality helicopter systems for the fire fighting, forestry and aerial application industries with a broad line of certified and custom helicopter equipment.

ISOLAIR has the system to fit your company’s needs and helicopter; from agricultural spray systems and bucket spreaders to fire fighting systems, forestry grapples and torches.

With competitive pricing, quality, easy to install products, and an ongoing commitment to customer service, we welcome you to contact us. Our knowledgeable sales staff are ready to answer your questions and advise you on the ISOLAIR system that will best meet your company’s requirements.

firefighting above and beyond.

ISOLAIR HELICOPTER SYSTEMS, 2410 N.W.PERIMETER BURNSIDE CT., GRESHAM, OR 97030 U.S.A. U.S.A. ISOLAIR HELICOPTER SYSTEMS, 1620 N.W. WAY, TROUTDALE, OR 97060 +1 503 492 2105 FAX: FAX:+1 +1 503 503 492 492 2756 SALES@ISOLAIRINC.COM TEL:TEL: +1 503 492 2105 2756 E-MAIL: E-MAIL: SALES@ISOLAIRINC.COM

19th Annual NAAA Convention Show Guide

11 E

415

Johnston Aircraft Service

Booth

Supporting ag aviation since 1947 We want to say a heartfelt “Thank-You” to our customers and friends in our industry. There is no way we could still be here without you.

During our 64 years of working with the ag aviation industry, we have seen many changes and improvements.

Our aircraft have gotten much better, our application technology has improved immensely and the equipment necessary to our industry is vastly better.

CP nozzles and check valves, Emco Wheaton Dry Break equipment, AFS Check Valves, Electrostatic Spray Systems, rotary atomizers and many other items enable us to give our customers excellent service and results.

When it comes to improving our aircraft, we now have the “Century” Thrush spar cap modification, vortex generators, control servos, wing root fairings, aerodynamic turtle backs, turbine conversions like the Cascade Walter Conversion Kit, Cascade Pressure Cowls, improved propeller designs, GPSs, electronic cockpits and much more.

Johnston Aircraft Service, Inc is proud to have played a supporting part in much of this and we look forward to many more years of helping in the advancement of our industry. Please come see us in Booth 415.

J ohnston A ircrAft s ervice SUPPORTING AG AVIATION SINCE 1947!!!

THRUSH / PIPER BRAVE / PAWNEE / CESSNA AG / AG-CAT / AIR TRACTOR • AIRCRAFT SALES / SERVICE / PARTS / MODIFICATIONS

OUR LATEST HIGH PERFORMANCE WALTER (G.E.) CASCADE CONVERSION THRUSHS. WE SELL/INSTALL CASCADE RAM AIR INLETS ALSO!

Thrush sPAr CAP Problems? our soluTions Are: “CENTURY” 60,000 hr mod kiT Thrush fACTory sPAr CAPs 24 HR. PHONES: 559-686-1794 or 686-2161 FAX: 559-686-9360 P.O. Box 1457, Tulare, CA 93275

Email: info@johnstonaircraft.com

parts@johnstonaircraft.com WebSite: www.johnstonaircraft.com 12 E agairupdate.com

We rePAir / modify / Thrush And brAve Wings And ConTrol surfACes inCluding CENTURY & FACTORY SPAR CAP insTAllATion / sAles.

Brave 4,100 Hour Kit Installation and Sales.

Thrush Multiple Modifications Thrush Landing Gear Repair and Rebuild CP Nozzles Distributor / Rebuilder of Emco Wheaton Dry Break Equipment Distributor / Dealer For All Ag Equipment Tremendous Inventory of Parts Parts & Services Catalog Available

Distributor for APS Brake Discs and Linings

Se Habla Español

703

Garrco Products

Booth

Arkansas operators take Control™

by Dennis Gardisser dgardisser@uaex.edu It’s hard to teach an old dog new tricks, but every once in a while I come upon something that is worth repeating.

I’m sure many of you have heard the 80-10-10 story that I tell when it comes to drift reduction products: 80% of the time nothing happens, 10% of the time the result is worse, and 10% of the time there is a definite improvement.

Laboratory results may be better, but actual field experience has been pretty close to this.

Arkansas S.A.F.E. clinics have included one day of field evaluations of drift potential for years. These evaluations have included a variety of different equipment setups and operating variables and typically include the favored drift reduction additives for the area. The data has been quite sporadic and probably a reflection of the variety of setups, weather conditions, mixing

procedures, and operating variables.

With all that said, there have been a few products that consistently show a positive response. Control™ from Garrco Products, Inc. has been one of the products that has consistently shown a reduction in drift potential.

A replicated field study was initiated last year to look at nineteen different drift control additives and water with two aircraft. The aircraft were selected to give two separate speed scenarios, 115 and 150 mph. A preliminary report of this study was presented at a NAAA/ASAE joint technical meeting. I encourage everyone to obtain a copy of that report, available through links on the NAAA web page, and see how their favorite product performed. Control™ was one of the top performing products in this study.

The key to consistency can also hinge back to how well products perform under real field situations. Arkansas had

Control

many operators utilizing Control™ as a drift control additive last year. Some of the comments I hear are: “Best material I’ve ever used, Very easy to mix and load, The material that I used to get on the windshield is gone, and Where can I get some Control™?” When one starts hearing these types of comments, there may be more to the performance than just good lab results. I was visiting a couple of different operators during the season and overheard conversations where they were either going to borrow some Control™ from someone else’s pallet until their shipment came in or another operator was coming to borrow some from them. This alone may tell the true story on performance.

Mixing and compatibility are one of the major issues with any drift reduction additive. John Garr, Jeff Tidwell, and I met at Tidwell Flying Service in Lonoke, Arkansas on a very cold morning just prior to the AAAA annual convention

to try several different tank mixes.

John has some new products under development and the mix results on those are another story, but we tried every way we could think of to cause mix problems with Control™without success. Control™ mixed very easily under all scenarios even with almost ice-cold water!

I have had any number of operators ask me which drift control products are best. I’m not so sure there is a best product. Remember there are many application variables. I would recommend that operators try to select a product that consistently shows positive results. Also, additives alone are not the complete answer. Properly utilized, they may provide an extra margin of safety. Operators should use every tool possible to avoid drift. Proper equipment setup and operation will always play a dominant role.

™

Deposition Aid/Drift Retardant

“Products Now Registered in Mississippi and Arkansas”

• Independent research shows superior performance.

• Mixes extremely well with no plugging.

• Pilots say they won’t work without Control™!

• Aids the deposition of liquid nitrogen

Without Control™

Just cents per acre with results you can see!!!

Contact for FREE Sample With Control™

“Your Additive Specialist” P.O. Box 619, Converse, IN 46919

Tel: 765-395-3441 Cell: 561-379-6251 Fax 413-235-5154 www.garrco.com email: mrfoam@garrco.com 19th Annual NAAA Convention Show Guide

13 E

N

45th annual

naaa convention & Expo Las Vegas ◊ Dec. 5–8, 2011

pre-registration must be received by thursday, nov. 23, 2011. use this form and register today!

MEMBEr rEGistration: You must be the designated member of an Operator or Allied Industry Company, State Association Executive, or have a Pilot, Affiliated Operator, Affiliated Allied, Associate, International or WNAAA membership in your name, or be the spouse of an NAAA member to qualify for member rates.

Registration at the convention site will cost $50 more per person!

naaa Members Member Spouse Child (under 12)

registration With Banquets $320 $265 $110

registration Without Banquets $220 $165 Free

registration registration non-naaa Member With Banquets Without Banquets Non-member $440 $340 Spouse $380 $280 Child (under 12) $110 Free Banquets: kickoff Breakfast and Farewell/awards Banquet

Extra BanquEt/rEcEption tickEt FEEs: NOTE: Attendance at the Welcome Reception, Auction Reception and Farewell Reception are included in your registration fee. Purchase Kickoff Breakfast or Farewell/Awards Banquet tickets only if you purchased a “without banquets” package. Purchase extra Welcome Reception and Farewell Reception tickets only for guests with no registration package.

Monday, Dec. 5 Kickoff Breakfast $40/each # needed Monday, Dec. 5 Welcome Reception $40/each # needed Thursday, Dec. 8 Farewell Reception $30/each # needed Thursday, Dec. 8 Farewell Banquet/Awards $75/each # needed rEGistrant: First Name

MI

Last Name

(Please print your name as you would like it to appear on your convention badge.)

Company

Phone

Address

City

Country

Fax

State

Zip

Email

spousE rEGistrant: (Please print name as you would like it to appear on convention badge.)

aDDitionaL rEGistrants: First

MI

Last

First

MI

Last

First

MI

Last

First

MI

Last

paYMEnt: Registrant Fee

$

Credit Card

Spouse Fee

$

Card#

Add’l Registrants

$

Exp Date:

NAAA Dues

$

Address

Banquet Tickets

$

City

totaL DuE

$

(U.S. funds only, must accompany registration)

or Check # Phone State

Zip

“Signature is permission to bill Credit Card.”

Mail payment and registration form to: naaa – 1005 E street sE – Washington, Dc 20003 print registration form at www.agaviation.org – Fax 202-546-5726 – questions? call 202-546-5722 E-mail information@agaviation.org. online registration will be available aug. 1 at www.agaviation.org.

14 E

agairupdate.com

National Agricultural Aviation Association | July/August 2011

33

Preferred Airparts Serving operators worldwide Preferred Airparts, of Kidron, Ohio, has been serving aircraft operators and maintenance facilities worldwide since 1982. Their present stock includes over 8-million new parts for J-3s to jets.

Preferred has many parts for ag operators including Cessna and Piper airframe parts. They have a large inventory of new Grumman/Schweizer G164A/B-600 spares including structural members, sheet metal, landing gears, firewall forward for the R-1340, dispersal system components and more. New parts are sold from 25% to 85% off list. The company also has new, used, and overhauled Continental and Lycoming engine parts at 50-65% discount.

Turbine engine parts are a growing segment of Preferred Airparts’ business.

Their ever-expanding stock is serving operators of P&W PT6A, Allison/Rolls Royce 250 and other turbine and jet engines for parts, consumables and rotables.

Wheels, brakes, and parts for many

PA

referred

irparts

New Surplus Aircraft parts!

Discounts ranging from 25% to 85% off!

Chosen for value and service

aircraft are a strong point at Preferred, along with light units and repair parts of all kinds. They have a wide selection of consumables including air, oil, and vacuum filters, spark plugs, and other items for piston and turbine aircraft including ag. Preferred is now a distributer of Donaldson air filters and JP Aero Plastics windshields and windows. Also they stock many popular Champion oil filters and Gill batteries to help you fill your order.

You can check stock on Preferred’s web site, www.preferredairparts.com, or call, fax or e-mail the sales team a list of your parts requirements. Anyone with inventories of new parts to sell, anywhere in the world and “for nearly anything that flies”, can contact Preferred for an offer. Preferred’s contact information is as follows, Phone # 800-433-0814 US & Canada, 330698-0280 Intl, Fax 330-698-3164, E-Mail sales2@preferredairparts.com

New surplus aircraft parts in stock for: Cessna, Piper, and many others, fixed and rotor wing!

• • • • • • • •

Airframe parts Accessories and parts Dispersal system parts Wheels, brakes and parts Propellers, blades and parts Spark plugs, filters of all kinds Engine parts, piston and turbine Hardware: AN, MS, NAS

nline Free o arch! y r o Se Invent

www.preferredairparts.com

800-433-0814

NEW SALES HOURS

Tel. 330-698-0280 - Fax. 330-698-3164 sales2@preferredairparts.com

Call or check online for details!

Toll free, U.S. & Canada

We Buy Worldwide!

7:15am to 8:00pm

EST.

Inventories of new parts for almost anything.

Apollo Spray Systems

Make your visual inspections easier!

Machida, Inc. offers a variety of flexible borescopes, videoscopes, accessories, and approved kits for the internal inspection of various engine models.

Specifically designed and certified for Robinson R-22 and R-44 helicopters, Apollo spray systems are proven to be the most efficient, easy to install and remove. Lets you and your Robinson make the most of your day, dawn till dusk.

FAA and EASA STC’d and ready to deliver.

Nobody makes a better system.

Call us for complete details or visit us online.

www.apollospray.com Actual Image taken by Machida’s 3mm Videoscope.

800-431-5420 ▪ www.MachidaScope.com

Toll-free 1-800-326-1534 Tel. (440) 632-5136 Fax (440) 632-1685 info@apollospray.com

19th Annual NAAA Convention Show Guide

15 E

COOLING & HEATING for your comfort.

Motor Compressor Condenser

Evaporator / Heater

ZEE Systems air conditioning equipment has been cooling AG aircraft since the 1970’s.

800-988-COOL 210-342-9761 www.zeeco-zeesys.com 902

h# Boot

ZEE Systems

Easy maintenance and efficient ZEE Systems introduces its new Z33-8900 Motor Compressor and Z33-89600 Motor Compressor Condenser assemblies with brushless DC variable speed drive motor and direct drive scroll compressor.

This system is built for easy maintenance and efficient operation. The motor is more efficient with built in soft start and the scroll compressor means a lower starting and running current.

No brushes to change.

No pulleys and belts to adjust. With the optional controller the motor speed can be adjusted for desired cooling at the lowest possible current. The Z33-8900 Motor Compressor will be used in all future designs. The SZ43, SZ58 and Z99 drive motors will be phased out with continued parts support planned through mid-2011.

The Z33-8900 is designed to easily retrofit current motor compressor designs.

Looking For your

Pot oF goLd?

◆ Air Tractor Sales & Service Center ◆ Complete General and Ag Aircraft Maintenance, Repairs and Rebuilding ◆ Complete Parts Inventory ◆ Hydraulic Spray Systems ◆ Annuals / 100-Hour Inspections ◆ Airframe Repairs and Alterations ◆ Recoverings and Fabric Repairs

ind it it in in an an Find air ir tractor ractor!

Mefford field • Tulare, Ca 93274 P.o. Box 566 • Tulare, Ca 93275-0566 559-686-7401 16 E

agairupdate.com

877-686-7401

518

Ag-Air TPE 331 OWNERS:

Turbines Affordable and quality service

Booth

Ag-Air Turbines, Inc. of Midvale, Idaho, is operated by Robert and Katie Baker. We are soley committed to the agricultural aerial applicators as a Honeywell Authorized Major Service Center. We offer affordable and quality repairs and maintenance for the TPE331 engines.

We provide Hot Section Inspections, GearBox Inspections, Compressor Section Inspections/Refurb, Engine Test Cell, Torque Calibration, Vibration Analysis, Engine Sales and 24-Hour Technical Support and A.O.G. Emergency Field Services.

Rocky Mountain Propellers

728 Booth

Safety and quality are trademarks Rocky Mountain Propellers, Inc. is an FAA/ EASA approved repair facility and is an acknowledged leader for quality servicing of propellers, piston governors and PT-6 governors. Rocky Mountain Propellers services Dowty, Hartzell, McCauley, MT, Ontic, Sensenich and Woodward products and is a distributor for Goodrich De-Ice and Rapco products. Our technicians are factory trained by the propeller manufacturers so you receive the very best servicing for your aircraft.

Propeller hubs and associated pitch change components are inspected using state-of-the-art non-destructive test methods. Inspection procedures utilized include magnetic particle, fluorescent dye-penetrate and Eddy Current. All machining and re-plating processes required by Service Bulletins and Airworthiness Directives are completed in-house to minimize downtime.

Safety and quality workmanship are the trademarks of Rocky Mountain Propellers. Our staff of highly trained technicians is equipped to serve the aviators of the Rocky Mountain Region and throughout the world. Our services come with a world-class warranty Rocky Mountain Propellers, Inc. is centrally located north of Denver, Colorado. Customers throughout the Rocky Mountain region and the world can rely on prompt and courteous service whether they ship articles in, or fly directly to the facility. With our 21,600 sq. ft. facility with heated hangar, we offer safe, secure indoor storage of aircraft. We strive to serve the aviation industry in a timely manner with a high level of performance, precision and safety.

Specialists in propeller and governor overhaul since 1982. www.rockyprop.com

WE PROVIDE COMPLETE AG SERVICES FOR THE TPE 331:

➹ Technical assistance in conjunction with Honeywell Technical & engineering specialists ➹ Honeywell authorized warranty claims repairs ➹ Emergency A.O.G. field service ➹ Hot section inspections ➹ Gear box inspections ➹ Compressor section inspection/refurbish ➹ Lebow torque calibration ➹ Engine run stand ➹ CAM ➹ Engine Sales

ROBERT BAKER KATIE BAKER 2245 Airport Rd., P.O. Box 155 Midvale, Idaho 83645 Phone: (208) 355-2259 • Fax: (208) 355-1114

Authorized Service center For honeywell AeroSpAce

ProPellerS • hartzeLL • mccaULey • DoWty • SenSenIch • mt propeLLer • rapco DIStrIbUtor • WooDWarD • pISton • pt6a

• Large Inventory • Same Day ShIppIng • UncompromISeD QUaLIty • competItIve prIceS • WorLD cLaSS Warranty • Factory traIneD technIcIanS

2865 aIrport DrIve erIe, co 80516

Faa/eaSa crS Fr6r545n Fax: 303-665-7164

GovernorS 19th Annual NAAA Convention Show Guide

17 E

Higher 2011 Kickoff Breakfast Education Roar offer! g with a ti

Flying Tiger Aviation offers flight and ground training for budding ag pilots, and turbine transition training for older hands.

• Ground Instruction & Tail Wheel Training • Instruction for Pesticide Licensing Testing • Dual-Control Turbine Thrush

Brian Shul will address aerial applicators as the Kickoff Speaker at NAAA’s 2011 Convention & Exposition.Brian Shul, NAAA’s 2011 Kickoff Speaker, has captivated audiences nationwide with his story of perseverance and triumph over tragedy. He emerged from the wreckage of a near fatal plane crash deep in the jungles of Vietnam to scale some of the highest heights ever in the SR-71, the world’s fastest, highest-flying jet.

In 1974, Shul’s AT-28 aircraft was shot down near the Cambodian border. He was badly burned and near death when a Special Forces team rescued him. Told he would never fly again, Shul underwent 15 major surgeries and spent a year in the hospital recovering from his burn injuries. After countless hours of physical therapy, he was back flying fighter jets with the Air Force just two days after his release. He went on to fly everything from the A-7 to the F-5 and taught as an Air Force flight instructor before capping his military career by being selected to fly the SR-71 “Blackbird,” A secret spy plane capable of flying at altitudes

above 80,000 feet and speeds in excess of 2,000 mph. Pilots had to undergo an astronaut type physical just to qualify, and Shul passed with no waivers. He is one of only 93 pilots to ever fly the famed spy plane.

Brian Shul, who piloted the famed SR-71 Blackbird, is the Kickoff Speaker for the National Agricultural Aviation Association’s 2011 Convention in Las Vegas.

When he retired from the Air Force in 1990, Shul published a book about what it was like to fly the SR-71 called “Sled Driver,” which contained rare photos and became the most popular book on the plane ever written. Shul started his speaking career back in the Air Force by telling his story. When he got out of the Air Force he pursued photography and writing and fell into public speaking because people were fascinated with his slide show. In the years since he has become a highly sought after speaker on the aviation circuit and by business, medical and church groups.

As a pilot and a nature photographer,

• Dual-Control Ag Cat • Primary S.E.A.T. Training • Glider Flight Instruction • Private Instrument & Commercial Instruction

Auger uger An’s s DAn Trucks rucks Stainless steel auger systems for loading ag aircraft Electronic height adjustable clear sock for dry material delivery

Call now!

Call Now! Flying Tiger Aviation (318) 244-7581 flytigeraviation@aol.com flyingtigersaviation.com 18 E

agairupdate.com

870-578-6133

Phone: Home: 870-972-8056 • Cell: 870-919-2317 Fax: 870-578-6145

danwhited@bscn.com

2612 Glenwood, Jonesboro, AR 72401 View our video on YouTube: http://www.youtube.com/MrAugerD

Brian Shul Shul has an appreciation for the work agricultural pilots do, and he is looking forward to sharing his story at NAAA’s 2011 Convention.

Be sure to register for the Kickoff Breakfast when filling out your registration form.

Las Vegas Hilton information You’ll benefit from a truly all-inclusive experience when you book your stay at the Las Vegas Hilton, NAAA’s headquarters hotel. Not only is the Las Vegas Hilton the official hotel for the 2011 NAAA Convention & Exposition, it’s the only place you need to be.

Everything—and we mean everything— takes place within the confines of the spacious Las Vegas Hilton. That means meetings, social engagements and the trade show itself. With 200,000 square feet of meeting space, the resort has more than enough room to accommodate NAAA’s meetings and exhibitors. And with the Kickoff Breakfast, Welcome Reception, Live Auction, Farewell Banquet and informal get-togethers happening in and around the Las Vegas Hilton, there will be no shortage of opportunities to visit with old friends and make new acquaintances.

We strongly encourage you to make your reservations early. Besides NAAA’s

Convention, the week of Dec. 5 also coincides with the National Finals Rodeo in Las Vegas, so we strongly encourage you to make your room reservations early. The cutoff to receive NAAA’s discounted group rate is November 14.

NAAA Hotel Registration Information Las Vegas Hilton 300 Paradise Road Las Vegas, NV 89109 Rates: $105/night + tax Contact: 800-635-7711 between 6 a.m. and 11 p.m. daily (PDT) *Reference National Ag Aviation Convention

Souther Field Aviation, Inc.

FOR ALL YOUR MAINTENANCE & PARTS NEEDS

Export Experts Authorized Turbine Brave Conversion • Transland • Covington Engines • Ag Nav • Turbine Conversions • Single Point Fueling

• Agrinautics Pumps & Valves • Wag • Cascade Conversions • TracMap

AUTHORIZED THRUSH PARTS DISTRIBUTOR AND SERVICE CENTER

And So Much More…

Frankie Williams - President—frankie@southerfield.com Paul Pearson - Parts & Maintenance—parts@southerfield.com Stephanie Williams - Exports—stephanie@southerfield.com

223 Airport Road, Americus, GA 31709 Phone: 229-924-2813 Fax: 229-924-4356 www.southerfield.com

STATE OFFICE OF THE GEORGIA AGRICULTURAL AVIATION ASSOCIATION

Booth

12 YEARS MAKING OPERATORS MORE MONEY

# 301

Spectrum Electrostatic Sprayers, Inc. 7500 San Felipe, Suite 860 Houston, TX 77063 USA Website: spectrumsprayer.com Southern US & Other Countries

Phone: 713-783-5771 Fax: 713-783-5772

Northern US and Canada Newberg Electrostatic Spraying

320-848-2745 320-848-2745

19th Annual NAAA Convention Show Guide

19 E

Simplex Mfg.

630 Booth

Simplex-Helipod’s Robinson spray system influencing agriculture worldwide Portland, OR—Simplex Manufacturing Co. is excited with the incredible success of the Simplex-Helipod spray systems for the Robinson Helicopter series. Within its first year, the Simplex-Helipod spray systems have become Simplex’s most popular spray models globally. Growth is expected to increase once the pending EASA application is approved. Operators have found that Robinson Helicopters with the Simplex-Helipod systems to be an economical and efficient team for aerial application both spraying and seeding.

Simplex also offers a line of Helipod cargo pods for the Robinson Helicopters and other light Helicopters.

Larry Lichtenberger, Vice President of Sales and Marketing of Simplex Manufacturing Co. says, “Simplex-Helipod Spray system’s first year has been a huge success, making the system a powerhouse

20 E

agairupdate.com

in the spray market. With systems being sold worldwide, the R44 spray system is sure to make an impact on agricultural production throughout the world.”

Founded in 1946, Simplex has built a reputation as the leader in design, manufacturing, and certification of aerial application systems and mission equipment for helicopters. Simplex maintains its industry leadership by incorporating the latest technology in design and manufacturing systems from high-strength, low-weight composite materials to produce cost-effective systems for firefighting and other aerial applications For more information contact Simplex Manufacturing Co. by phone at 503-2573511; fax: 503-257-8556; e-mail: mail@ simplexmfg.com or visit the website simplex.com.

928 Booth

AeroFlow Systems

AFS check valves the choice of applicators

New stocking dealers added. AFS check valves can now be purchased at the following dealers: Neal Aircraft, Frost Flying Service and Farm Air. AFS check valves continue to be the check valve of choice for discerning aerial applicators who are concerned about making their operation leak..and drip... free..

Two models, standard and on-off, allow operators to configure spray booms for quick, easy gallonage change.

The internal screen filters particles to eliminate the cause of check valve leaks.

Join the long list of satisfied customers and start spraying with confidence.

AeroFlow Systems will be in booth 928 in Las Vegas, come by and say hello.

Standard Check Valve

On-Off Check Valve

Booth #204 & 206

www.midcont.net • 800-325-0885

Chester Roberts Supply Company Overhauled Aircraft Engines, Propellers 661 Pearce St. • Collinsville, TX 76233 Tel: 903-429-6805 Fax: 903-429-6047 crs5r@aol.com Pratt & Whitney and Curtiss Wright Engines and Parts Carburetors - Magnetos - Alternators - Accessories Overhauled engines in stock

R-985 R-1340 R-1820 R-1830 R-2800 Top Quality Engines / Props Distributor For

JASCO Alternators

Family Owned & Operated, Celebrating Our 43rd Year of Serving You! Buying engines/parts/propellers/parts Top Prices Paid Send List or Call 19th Annual NAAA Convention Show Guide

21 E

J & C Enterprises Aviation Inc

1122 Booth

Celebrates 41 years of service J & C Enterprises Aviation has been located in Oklahoma for 41 years. The business was started by Jerry and Cecilia Buster in 1970. We are located in the central United States and our staff is on duty from 7:00 AM to 6:00 PM to help with your aviation needs.

We specialize in Cessna ag aircraft,

but we also have an extensive inventory of Cessna 180-185, Piper Brave and Pawnee, Citabria, Dromader, and Aero Commander Lark and Darter.

We are dealers for Transland, McFarlane, tail wheel parts, general aviation parts and even larger miscellaneous new and used parts.

Our staff will help you fill your aviation needs! Just call Sid, our parts manager, or Jerry, Grant, Denise, Wilson, and Cecilia who will be glad to help you.

J & C ENTERPRISES AVIATION INC.

800-542-8565

Booth #204 & 206

SPECIALISTS IN CESSNA 188 ExTENSIvE INvENTory of ThE foLLowINg AIrCrAfT

www.midcont.net • 800-325-0885

Cessna 180-185-188, PiPer Brave & Pawnee, CitaBria, DromaDer aero CommanDer Lark & Darter sCott & XPm taiLwheeL Parts, ContinentaL, LyComing, transLanD, harDware, ChamPion & CitaBria, mCfarLane, ag fiBergLass anD a Lot more.

Having trouble finding tHose difficult parts!!!

LET our STAff fINd ThAT hArd To LoCATE PArT for you.

Turbine Installation, LLC

Aircraft hardware

5017 Aviation Way Caldwell, ID 83605

your Authorized Transland dealer wE buy SALvAgE & NEw PArTS INvENTorIES

Se habla Español Airport Road #14 • Thomas, OK 73669

800-542-8565 • 580-661-3591 (OK) • 580-661-3783 (FAX) www.jcAviATiOn.com • email address: jcaviation@pldi.net

22 E

agairupdate.com

Diner Club

208-455-9350

www.turbinesllc.com tim@turbinesllc.com

Air Tractor AT-802 Powered by Honeywell TPE331-14GR 1650 SHP 4500 HSI/9000 CAM

502

Hardy Aviation Insurance

Booth

Specializing in aviation insurance Wichita, KS—Hardy Aviation Insurance is located in Wichita Kansas, the heart of the true Midwest. Randy Hardy established the agency in 1995 and we are closing in now on our 16th year.

Along with Angie Banz, who started with the agency on day one, our staff consists of Rita Ethridge, Melinda Greene, Peggy Hahn, Tim Wiebe, Kelly Hayen and Dick Russell.

As an aviation insurance agency and broker, we specialize in all areas of aviation insurance. Our special emphasis in business is in the aerial application field, placing Liability and Physical damage coverages for all types of use. We are a full service agency in that we can offer coverage for building or any Property Casualty needs and service your employer’s liability coverage needs too.

Within our agency, Angie Banz and Rita Ethridge have a combination of over 50 years of experience in aerial

application. Randy Hardy, Dick Russell and Tim Wiebe, all being pilots, dedicate their time traveling to see each operation reviewing their aviation needs. Support staff, including all other aviation needs, is Melinda, Peggy and Kelly.

Hardy Aviation Insurance is dedicated to service the old fashion way, with hard work, communication skills and the willingness to negotiate your need as though we were an extension of your business. From agricultural aviation to fixed base operation and personal aircraft, we strive to make a satisfied customer through our hard work and dedication to your needs.

We represent all the major insurance companies who offer aviation insurance or alternate needs, including Lloyds of London. Aerial application is a very specialized business and when seeking coverage you need to work with and through an agency that understands

your needs and knows the insurance #502 stop by and visit with Randy company’s policy well enough to match Hardy, Tim Wiebe, Dick Russell and their policy to your expectations. Good Angie Banz. We will have applications policies and good service are not only for all your aviation insurance needs, or good business, but also necessary to just visit with us at the show to gather insure you have the coverage you need your information for a no obligation at the price you can afford. quote.

HardyAvIns_AgAirUpdate_38Pg_Color_04 10/2/09 10:31 AM Page 1 At the NAAA show this year in booth

From Agricultural Aviation to Fixed Base Operations and Personal Aircraft... Call Randy, Tim, Dick, Angie, Melinda, Peggy or Rita with all of your aviation insurance needs. We’ll make a satisfied customer out of you the old fashioned way...

... Good Policies and Good Service.

P.O. Box 12010, Wichita, KS 67277 Phone: (316) 945-6733 • Fax: (316) 945-2330 Visit us on the web at

www.hardyaviationins.com

1• 800 •721• 6733 Coverage From a Name You Can Trust ... At a Price You Can Afford!

Air-Tech Coatings

Polyurethane Aircraft Coatings

19th Annual NAAA Convention Show Guide

23 E

AgriSmart Information System

400 Booth

Product preview from AgriSmart Information Systems LLC Flight Plan Online brings together some of the best technologies to give you a better way to communicate with your customers and manage your business so you can focus on spraying more acres.

You and your pilots will be able to spend more productive time in the air and less time doing paperwork.

Your customers will appreciate the professional and accurate mapping that Flight Plan Online provides as well as its ease of use. They will welcome the ability to track the progress of their job orders with no phone calls.

The most powerful component of Flight plan Online is the ability to process job orders using a centralized online system. This allows you or your customers to submit accurate jobs orders with geo referenced field maps.

As job orders come in you can review

24 E

agairupdate.com

them for accuracy and formally accept the work. Job orders can also include sensitive area alerts, field worker alerts, and adjacent crop identification to let you assess the level of risk. You can see all outstanding jobs on a map screen to filter those jobs into the most efficient batches for spraying. You can easily schedule job batches with common products and geographic proximity. Flight Plan Online generates all the information needed by the pilot, including loading sheets, individual job maps, and master maps that give an overview of all field locations.

You can easily upload shape files to your guidance system to make the most of the guidance technology that is already in your plane. After spraying you can record actual application information and if desired, download

the data from your guidance system to include as-sprayed imagery. You can then generate invoices from the job details already captured in the process, even on the same day you spray!

Flight Plan Online generates all the information needed by the pilot, including loading sheets.

Flight Plan Online also acts as your electronic system of record keeping, allowing you to generate a formal

application report any time to document regulatory compliance.

Our customers tell us that Flight Plan Online makes their lives better, takes stress out of the cockpit, makes them more efficient internally and brings better communication to their customers.

Bottom line, Flight Plan Online will help you earn more revenue and maximize your profits by making the most efficient use of your resources.

For more information on Flight Plan Online visit their website at www. agrismartis.com or give them a call at 800 890-6945. See them at Booth #400 at the show!

Airplane Services, Inc September 2011 marks 30 years in business for Airplane Services, Inc We would like to thank all of our customers past and present for using our services. We have many loyal customers that date back to the early 80s when we started out in the old Benoit, Mississippi ice house. The business has changed quite a bit over the years, but crop dusters are still about the same. As always we will give you the best price we can on quality used parts. There are many great things to look back on over the past three decades and we hope to be in business for many years to come.

Used Parts Buy or Sale

Over 30 years of service

Airplane Services, Inc. 1817 Mineral Springs Road Jay, Florida 32565

Ellis Stuart Chad Stuart

Office: 850-675-1252 Cell: 850-380-6091 ncsflyboy@yahoo.com

19th Annual NAAA Convention Show Guide

25 E

WNAAA Las Vegas activities Join the ladies of the WNAAA for Fashion, Fellowship, Fun and Art at the 2011 Convention!

WNAAA has some terrific events planned, and welcomes all women, including spouses and employees who work in the ag aviation industry, to join them in Las Vegas.

Monday, Dec. 5

10:00 a.m. – 12:00 p.m.-Seminar on Holiday Fashion (RSVP required) 12:00 p.m. – 1:30 p.m.- Light Bites 1:30 – 2:00 p.m.- Shop Your Shape The Saks Fifth Avenue Seminar on Holiday Fashion, replete with complimentary “light bites,” champagne mimosas, and “Shop your Shape” session, already looks like something everyone

Aviation Insurance Specialist  Business

 RotoR CRaft

 PleasuRe

 sPoRt CRaft

 CommeRCial

 sPeCial Risk

 WoRkman’s ComP

 ag aviation

Gerald andrews gandrews@airsouthinsurance.com don Peters dpeters@airsouthinsurance.com

www.airsouthinsurance.com

800-844-7105 Tel: 334-793-9802 • Fax: 334-793-5490 P.O. Drawer 6727 Dothan, Alabama 36302 “We Want and Appreciate Your Business We’re Working To Earn It” 26 E

agairupdate.com

wants to attend. To add to the fun, each participant will receive a $20 Saks Fifth Avenue gift card to spend during convention week.

Seating is limited and you must RSVP

by Nov.30. Please e-mail Kayla Caillouet at KPC57@hotmail.com or (337) 432-5558 to sign up for this fashion extravaganza.

Tuesday, Dec. 6 9:00 – 11:00 a.m. -The Athena Presentation Athena provides strategies and ideas ladies of the WNAAA can use in their everyday lives. This presentation helps participants learn from each other about living the ag aviation lifestyle.

1:00 – 3:00 p.m- Cajun Country Come Along/President’s Open House Join WNAAA for more fun and fellowship at the Cajun Country Come Along, hosted by WNAAA President Julie Broussard. They’ll be Cajun snacks, wine and conversation. The setting is casual, so come as you are.

Wednesday, Dec. 8

9:00 – 10:30 a.m.- President’s Breakfast Join WNAAA for breakfast on the bayou. Mimosas, Bloody Mary’s and Cajun treats are on the menu, courtesy of WNAAA. Afterward, Julie Broussard presents her President’s Awards for 2011.

11:00 a.m. – 1:30 p.m.- Bellagio Conservatory & Botanical Gardens/ Bellagio Gallery of Fine Art WNAAA will be taking a cultural excursion to the Bellagio! Transportation and admission fees will be provided by the WNAAA. In addition to the Conservatory & Botanical Gardens and the Gallery of Fine Art, WNAAA will view the Fiori di Como – an extraordinary glass sculpture chandelier by glass sculptor Dale Chihuly.

Thursday, Dec. 9 Free Day Enjoy all the glitz and glamour the Entertainment Capital of the World has to offer as you explore Las Vegas!

• subscribe • renew • order pen & ink drawing • order a book • order AAU archives • sign up for eEdition • place a classified ad • talk

713

APS Brakes

905 Booth

Innovation, quality, performance = ® BlackSteel brakes

Aviation Products Systems, Inc. has been manufacturing BlackSteel® brakes for the past decade. During this time, they’ve developed some of the best general aviation aircraft brake discs available. APS brake products are designed and fabricated with the durability to withstand harsh environmental conditions, as well as the heavy braking associated with agricultural work, resulting in greater safety margins. APS brake products offer these advantages at a very economical price, providing lower operating costs to the operators. With APS distributors

The Proven Original Exclusively manufactured by

strategically located around the world, availability of the APS brake products is excellent. APS brake products are a truly innovative product at a cost effective price and worth your time to explore.

Check it out at www.apsbrakes.com!

Aviation Products Systems, Inc. has been manufacturing “BlackSteel”® brakes for the past decade. During that time, we’ve developed some of the best general aviation aircraft brake discs available. If you don’t see the “BlackSteel”® logo then it isn’t an APS original brake.

Find all of our available brake components at www.apsbrakes.com

Scan this QR code with your smartphone or tablet device.

The Gorilla Radial Engine Filter Kit From Airwolf It’s big and it’s mean and your oil is clean.

The Gorilla is the oil filter system you need for your radial. Don’t put your radial at risk or lower your TBO.

Chip Kemper, President

The Gorilla Oil Filter System from Airwolf cleans your oil at a growling 25 gallons per minute.

The Gorilla filter kit is simple to install anywhere on the engine mount, with high-volume, easy-to-change spin-on filters. It’s STC’d for ALL radials by Pratt & Whitney, Jacobs, Wright, Continental and Lycoming.

Endorsed and recommended by Aero Engines • Aero Recip • Aircraft Cylinder & Turbine • Covington • Sun Air Parts • Tulsa Aircraft Engines.

www.airwolf.com

Air TrAcTor SAleS & Service Your screen doesn’t clean.

So make room…

The Gorilla wants in!

Your Northwest Air Tractor Dealer 800-736-7654 Fax 208-745-6672

We Make Flying Safer ™

Toll-free 800-326-1534 • Tel. (440) 632-5136 • Fax (440) 632-1685 • info@airwolf.com

Office 208-745-7654

136 N. Yellowstone Hwy. • Rigby, Idaho 83442 19th Annual NAAA Convention Show Guide

27 E

Southwest Airmotive

1006

h# Boot

New facility for Southwest Airmotive

DynaFlight

AirAg E-Series

Integrated Flight Guidance Instrument (IFGI) & embedded Processor

DynaGrip Control

Entire system weighs less than 7 pounds (3 kilograms)

DynaFlight

AirAg PRO

Processor Integrated Flight Guidance Instrument (IFGI)

DynaGrip Control

Entire system weighs less than 10 pounds (6 kilograms)

GPS Systems for Aerial Applicators Only dynanav.com

DynaNav Systems Inc. Toll Free 1-877-333-9626 E-mail: airag@dynanav.com 28 E

agairupdate.com

Southwest Airmotive Corp is pleased to announce that we have recently relocated to a new 9,000 sq. ft. state of the art facility at the Eloy Municipal Airport, conveniently located along I-10 midway between Tucson and Phoenix. With direct access to a 3,900 ft. runway, we now offer flyin capability which enables us to perform repair, troubleshooting and hot section inspections ‘on wing.’ We are constructing a new test cell which will enable us to improve our delivery times and offer our services at a more economical price.

Southwest Airmotive Corp. has been performing fast, reliable and cost effective Pratt & Whitney PT6 engine maintenance and repair since we opened our doors in Tucson in 2004.

We look forward to providing an even higher level of service in our new location.

WE DO IT RIGHT!

We’re the small shop that’s huge on service - unsurpassed in workmanship.

We’re your experts for complete service to the full line of Pratt & Whitney PT6 Engines.

• Overhaul • Repair • On-site Capabilities • Hot sections in the Field

www.southwest-airmotive.com 4801 North Tumbleweed Road • Eloy, Arizona 85131

520-466-7274

104 Booth

Skeet-R-Gone

Flock Buster repels birds

Save your crops and increase your yields!

Birds have been a problem for growers as far back as anyone can remember.

Whether it is through partial or complete crop loss, birds are responsible for decreased profits and not to mention, countless headaches. With no signs of this feeding frenzy slowing, one must question, “What can be done about these troublesome birds?” A company in West Fargo, ND has the answer: “Flock Buster.”

Flock Buster, a bird pest control product which is the first of its kind, is a 100% ecological friendly bird repellent that can be used anywhere birds are undesirable. Either mixing for farm aerial distribution or ground sprayer distribution, Flock Buster is easy to use and proven effective.

Flock Buster is an extremely valuable tool for bird management in sunflowers, corn, wheat and rice as well as Canadian Geese feeding on corn, grain, beans and sunflowers. In its third season, Flock Buster has already helped numerous farmers reclaim their fields.

Flock Buster has many uses outside of the agricultural industry as well. The product has proven to be an essential part of an effective wildlife management program assisting airports with bird control. Flock Buster is also useful in eliminating birds at landfills, golf courses, marinas, parks and any other outdoor recreational areas.

For more information on Flock Buster, visit the company’s website at www. flockbuster.com or call 877-NO-CROWS.

DG

LE

W

S ILL SK N TIO VI A LA TU RA

O KN

UL

AL

TIC

AU E

AG RIC

ON ER

Randy Berry announces additions to his Ag Pilot Training Program. A Pawnee PA 25-D-260 C/S has just been brought on board for our ag training programs.

Randy says,“with custom modifications like a constant speed prop, a Hemisphere Bantam GPS, and installing a smoker to provide enhanced swath simulation, this is the best platform available for ag training. We offer our students a one-on-one mentorship, yet still provide a qualified course syllabus that offers ag pilot skill building while

&A

Additions to ag training program

AG

Eagle Vista

GOOD JUDGEMENT AND RISK MANAGEMENT

emphasizing good judgement and risk management.”

Additionally, a turbine transition course is now available in an AT-504. Randy is authorized by Air Tractor to provide this course. Randy is also Chief Pilot for Southeastern Aerial Crop Service, Fort Pierce, FL. Come by to meet us and say Hi! at the NAAA convention. We’ll be at the Southeastern Aircraft Sales & Service Booth #1015 and both Compaass Rose Sessions.

19th Annual NAAA Convention Show Guide

29 E

In these tough economic times We can Save you money on; Engine Repairs Hot Sections Parts Repair Fuel Nozzle Exchange Insurance Claims Lightening Strike Inspection Engine Overhaul Using the approved Pratt & Whitney testing program First Class work accomplished by experienced Professionals

For immediate Service Call Jim 812-877-2587 812-877-4604 turbines@turbinesinc.com

At Turbines Inc. we repair your airworthy parts, not replace them.

30 E

agairupdate.com

423 Booth

Turbines Inc

Engine repair, engine overhaul In business for 30 years, Turbines Inc. is the oldest and most experienced independent agricultural PT6 overhaul shop in the USA. Turbines Inc. can repair your PT6 engine using the highest quality and experienced labor at a price well below our competitors. Giving back to you, the customer, a reliable, less expensive engine.

Turbines Inc. gives the most economical and quickest turn around on prop strikes, insurance claims, hot section inspections, fuel nozzles, engine repairs and engine overhauls than anyone in the PT6 agricultural engine business.

Turbines Inc. also has a new computerized test cell using the approved Pratt & Whitney testing program.

At Turbines Inc. we repair your airworthy parts, not replace them.

For scheduling or troubleshooting information call Jim at: Phone: 812-877-2587, fax: 812-877-4604, turbines@turbinesinc.com

From the heartland of America, our engines are flying over every continent.

19th Annual NAAA Convention Show Guide

31 E

417

Cascade Aircraft Conversion

Booth

What’s the buzz?

Dennie Stokes says…

What’s the buzz about the Cascade Pressure Cowl (CPC)? Dennie Stokes, past NAAA President, V.P. at Mid-Continent Aircraft Corp. in Hayti, MO, a very successful ag pilot and advocate for the air ag industry this year installed the CPC on one of their 510 Thrush. When the OAT began to rise, his decision to upgrade his 510 with the Pressure Cowl really shined. Dennie said “When the OAT was 102 degrees, I was able to carry a full load, pull full torque and not temp out…what more do you need to know!”

Dennie joins a growing list of turbine owners who are seeing tremendous benefits from installing the CPC on their aircraft. When the OAT climbs, the ability to haul a full load, pull full torque and not temp out pays big dividends! After flying a new factory Thrush both with factory inlet and CPC, Dennie said “It is

just amazing to me that you couldn’t look at the data and see that this (Cascade Pressure Cowl) is obviously a positive because your engine is doing two things: the engine is performing the way you are paying for it to perform and you are buying time on the motor – any time the engine has to work less, as the temperature is down and the Ng is down, is obviously more time that the engine is going to be capable of running.

There is no doubt about it. As soon as I took the prop out of feather into pitch I watched the manometer reading climb from -0.8 to positive 7.56 (inches of water column). As the prop went forward, I could follow that line going up on the manometer as the prop started making thrust.” “If an operator will just evaluate the data and do it honestly and fairly, any operator who sits in the seat

Dennie Stokes - Vice President Mid-Continent Aircraft Hayti, MO G.Lavender, photo

understands that you can make redline torque under any conditions, where as before you weren’t able to. I don’t care who you are, it takes horsepower to make the plane fly. There is a point where you don’t have any more tricks up your sleeve

and it is a matter of horsepower, and torque is horsepower.” There is so much more to the report and there is a buzz building about the Cascade Pressure Cowl. Ask Cascade for more information or talk to Dennie Stokes.

800-716-2550

PH: 509-635-1212 • FAX: 509-635-1477 cascade@completebbs.com

www.cascadeaircraftconversions.com

IT’S ALL ABOUT AIR! GE Turbine Conversions

Pressure Cowls

• Complete Firewall-Forward unit • 751 HP Turbine • Auto Start system

• Reduce ITT • Reduce Fuel consumption • Protect Your Investment

for Air Tractor & Thrush

for all PT6 Air Tractor & Thrush

GE Authorized Service Center for M601 and H80 engines

ENGINE SERVICE • PARTS • HEAVY MAINTENANCE AND OVERHAUL SCHEDULING • EXCHANGES • SERVICE TRAINING

SERVICE AFTER THE SALE! 32 E

agairupdate.com

Curtis Agri-Line ASC

1000 Booth

ASC Rotary Atomizers are still going strong

by Graham Parker Rotary atomizers have now provided excellent service for more than 40 years and this year has shown yet again an increase in the number of operators turning to rotary.

The ASC Curtis / AgrilineTM rotary atomizer has stood the test of time and proved itself through the years to provide excellent repeatable and reliable service.

Those operators investing in ASC atomizers soon understand the benefits, namely consistent improved deposition, versatility with the ability to apply the full range of chemicals, herbicides,

302 Booth

ASC ROTARY ATOMIZERS

TM

“Coverage You Can Count On Since 1947” • GENERAL AGRICULTURE • MIGRATORY PESTS • PUBLIC HEALTH • PLANTATIONS • FORESTRY • ORCHARDS “When compared to high pressure nozzles, ASC’s produce a more uniform droplet spectrum resulting in superior coverage.”

NAAA BOOTH 304

- Lindley Johnson, AgPilot/Owner Johnson Airspray Argyle, MN

ASC-A10 Rotary Atomizer installed on a standard boom

insecticides and fungicides at application rates from ULV, LV to HV, together with operational reliability and minimal maintenance.

In some applications, because of the improved performance, reduced rates of application have been possible enabling greater productivity to be achieved.

Learn more by visiting us at the NAAA Booth 1000.

Contact Curtis Agri-Line ASC 17335 US Hwy 31 North P.O Box 297 Westfield, IN 46074 USA E-mail: asc@dynafog.com Ph: 317-896-2561 Fax: 317-896-3788 www.dynafog.com

Unmatched Performance!

See ASABE test results at: www.dynafog.com/ascresults

Photo of ASC spray trial SK, Canada 2009

WHY CHOOSE ASC?

• PROVEN SUPERIOR COVERAGE. • BACKED BY YEARS OF PROVEN. PERFORMANCE. • HANDLES MORE THAN 15 GPM PER ATOMIZER. • RUGGED AND RELIABLE DESIGN. • PRECISION MADE IN USA. • WORLDWIDE CUSTOMER SUPPORT.

ASC-A10

SUPERIOR QUALITY...SUPERIOR SERVICE...SUPERIOR RESULTS Curtis Agri-Line ASC Westfield, Indiana, USA Ph: 317-896-2561 asc@dynafog.com www.dynafog.com

Agrinautics

Unsurpassed in quality and enginnering Agrinautics has been providing the ag industry with superior spray components for over 50 years. Founded by George Sanders in 1958, Agrinautics still takes pride in manufacturing spray pumps and valves that are unsurpassed in quality and engineering. All components of our pumps, valves and strainers are still manufactured on site at Agrinautics so that we have absolute quality control in each casting until it is assembled and

sent out the door.

In addition to protecting our pumps and valves with the industry’s best warranty (2-years / 800 hours), we also offer the option of Teflon® Tuffcoating.

The hard anodizing and Teflon coating resists wear and corrosion and as an added benefit, makes clean-up a snap.

Give it a try today!

Agrinautics would like to thank all our customers for a great year.

Same Superior engineering now even more protected!

• Hard Anodized Teflon Tuffcoat® Protection • 2 Year - 800 Hour Warranty Protection • FAA PMA Protection Maintenance Friendly Pumps, Valves & Strainers For All Aircraft Makes Specialty Application Available www.agrinautics.com 435-586-1200 • sales@agrinautics.com 1215 N. Airport Road • Cedar City, UT 84721

19th Annual NAAA Convention Show Guide

33 E

Ag-Nav Inc.

Booth

Ag-Nav offers reliable service and support The Ag-Nav Inc. team invites you to visit us at Booth # 110 during the 45th NAAA convention in Las Vegas, Nevada.

FREE navigation demo software and GIS post-processing software will be available to all visitors. Visitors to our booth will also have the opportunity to see our new products and will be able to speak with our staff.

Our customer loyalty speaks volumes for the quality of products we have delivered in the past and the experience obtained during these years will guarantee that every product manufactured by Ag-Nav Inc. will have 100% satisfaction. When you purchase from Ag-Nav, we offer you reliable factory service and support as well as free software updates for the life of your product.

This year, Ag-Nav Inc. is pleased to introduce the new and improved TRACKERNAV system. This system is designed like no other tracking system without operational costs. TRACKERNAV is an advanced Automated Vehicle Location (AVL) system designed with fleet management in mind. GPS technology and airwave communication technology provide for a robust, scalable system with no up-front telemetry costs.

TRACKERNAV consists of an in-vehicle GPS receiver coupled with a modem.

Combined with TRACKERNAV software on your PC, TRACKERNAV puts you in control of your data from anywhere in the world and when you want to see it.

Other AVL systems store data off site which can lead to costly, monthly data hosting fees. When deployed as part of a fleet management system, TRACKERNAV delivers accurate real-time information enabling route planners to compare where the vehicle should be and where the vehicle actually is.

Our SPRAYVIEWW software has been very successful with helping our clients interface applied data to Google Earth.

During the 2011 season many customers used this software to get accurate maps and geo-referenced data for their

34 E

agairupdate.com

applications by interfacing with Google Maps. With SPRAYVIEWW, data analysis is easy and reporting is better than with other more costly agriculture GIS software on the market.

Many of our clients have asked for the automatic booms on/off technology to be able to use geo-referenced maps with exclusion zones and such. This year we delivered a fully automatic on/ off valve that reacts in a fraction of a second to the map’s information during the application. This allows for the pilot to just fly the lines and maintain the guidance line accuracy. This makes the system fully automatic along with our automatic AG-FLOW control and our navigation system.

Visit us at our booth #110, we will have several systems on display for you to interact with.

The SMART BAR hardware suits the requirements for fixed wing aircraft and helicopters. We have produced a small, medium and large size NAV-BAR. They are equipped with state-of-the-art technology and are able to give you four alphanumeric messages with four digits for each selection; thus, displaying more accurate information in real time.

This new design is brighter than any other intelligent light bar on the market.

It is lightweight and aerodynamically designed to fit any type of aerial application aircraft. A new light bar will be shown at the NAAA. All models will be on display at Booth # 110.

When you visit us at our booth, we will have several systems on display for you to interact with, such as the popular Ag-Nav GUIA “GOLD” model for aerial application. The Ag-Nav GUIA is a DGPS navigation system designed to meet

110

and exceed specific requirements for guidance in aerial applications. Features such as the USB port allows for fast uploading and downloading of files, saving you time and money. One USB stick can store data for a whole season, making the Ag-Nav GUIA very safe and reliable. No data cards, no PCMCIA, no memory cards to carry or lose, just a plain USB key will do the trick. With the Ag-Nav GUIA, your data stays in the hard drive until you decide otherwise.

Unlike other heavy and bulky systems on the market, the Ag-Nav GUIA is packaged in a compact single unit to save space and reduce weight. The user-friendly software makes it easy to navigate through menus for set-up and real-time application and its built-in light bar is useful, convenient and sufficient for some operations. Installation and removal are done in a snap! The Moving Map Display has a rugged design to withstand G forces and vibration from any aircraft, unlike some models on the market today that are made with plastic structures that fatigue with time. The screen delivers bright color in daylight and adjusts for night flying when necessary.

NO VIRUS - The operating system for the Ag-Nav GUIA allows pilots to navigate through menus with relative ease. It runs on a LINUX platform; thus, there are no attacks from viruses most common in Windows operating systems.

The Ag-Nav GUIA uses features with full data logging that has proven userfriendly and successful in agricultural, forestry, geophysics, mosquito control and many other airborne applications.

TOWERS AND OBSTACLES – Ag-Nav Inc. has developed an application that allows you to load all USA towers above 200 feet as per FAA data files.

This is also true for worldwide towers if the information is available, please see one of our staff for more information…

The FLIGHTMASTER navigation system has been designed to meet mosquito control aerial application specific

requirements in the battle against field infestation. This system carries an on-board weather station (AIMMS20) and provides real-time information on wind speed, wind direction, relative humidity, temperature and barometric pressure. Data is updated on every pass and displayed on a Moving Map during navigation. FLIGHTMASTER provides the pilot with swath, directional guidance and other navigational information required to carry out precise aerial applications. The FORESTMASTER works in similar fashion, but with features geared for forestry application.

The AG-FLOW automatic flow control system has been designed to ensure a steady distribution of application rates by automatically adjusting its flow. This system consists of a flow meter or sensor, a valve and DC motor to adjust the valve position, and a controller box. The flow rate is adjusted automatically by the valve position; thus, controlling the required flow to the spray booms. The controller box is a state-of-the-art computer which has serial ports and CAN bus technology used for communications with other systems. The simple and easy installation process guarantees that the AG-FLOW is ready to use right after installation as calibration is very fast and effective. The AG-FLOW is also capable of variable rate application.

Looking into the future, we wonder if there is a need for a full autopilot AgNav system…we are working on it and will be revealed to the industry by the end of 2012.

For more information on the above systems and other Ag-Nav products such as FIRE-NAV, TRAX-NAV, GROUND-NAV, LI-NAV and PHOTONAV, please visit us at NAAA Booth # 110 or contact us today at 1-800-99 AGNAV (24628). You can also visit our website at www.agnav.com.

During the 45th naaa convention, please sign up and join us for a free session of Ag-Nav training. Contact us for details.

19th Annual NAAA Convention Show Guide

35 E

528

Aero Engines

Booth

1st in quality, dependability & service Aero-Engines, Inc. was founded in 1955 to service the needs of operators using Continental W-670 and Pratt & Whitney R-985 and R-1340 engines. The company was founded by eight experienced mechanics and continues 56 years later to have the most experienced and

The parts department has an extensive supply of parts, enough engines to support our extensive exchange program.

Aero-Engines, Inc has provided service to a large number of ag operators over the years, but has also overhauled engines for commercial and private aircraft such as the DeHavilland Beavers and Otters, Stearmans, Staggerwing Beachcraft, etc. Many of our engines have been on the winning aircraft at the Reno Air Races in the AT-6 category. Last year’s winner was Dennis Buehn.

Super 600

"Your Overhaul SpecialiSt For R-985 & R-1340 P&W Engines and Continental W-670 Engines"

Our ShOpS prOvide YOu With the BeSt

Check Our Overhaul Cost... includes Magnetos & Carburetor • EnginE Shop-

Magnaflux, Zyglo, Ultrasonic, and Dimensional Inspections.

• CylindEr Shop-

"Chrome" Or "Steel" Barrels, “Metallized" Cylinders, 100% Guide Replacement, New Or Serviceable Pistons.

• ACCESSory Shop-

Magnetos, Carburetors, Starters, and Generator Overhauls.

• MAChinE Shop-

Cam Grinder, Cylinder Grinder, Piston Grinder, Lathes, and Balancing Machines.

• pArtS dEpArtMEnt-

Over a Year's Supply of Most Parts and Enough Engines to Support an Exchange Program, and Inside Storage of Customer and Overhaul Engines

AERO-ENGINES

Home of the Super 600 "The Engine That Sets The Standards In The Ag Aviation Industry"

TEL 323-663-3961 FAX 323-664-5189 • aero-engines@msn.com • www.aero-enginesinc.com 3030-34 North Coolidge Ave. • Los Angeles, CA 90039-3491

36 E

agairupdate.com

dependable crew in the business.

The current partnership ranges from a minimum of 30 years to 40 years of experience with the company.

Centrally located in Los Angeles since its inception, our shop continues to be the leader in providing quality and dependable overhauls of Continental W-670 and Pratt & Whitney R-985 and R-1340 engines.

We have the most complete facilities in the country with an engine shop equipped to do our own inspections such as Magnetic Particle (Magnaflux) Dye Penetrant (Zyglo), Ultrasonic and Dimensional.

Our cylinder shop’s strict standards include fully “metallized” cylinders, 100% guide replacement, new or serviceable pistons and a choice of “steel” or “nu chrome” barrels.

Our accessory shop overhauls our magnetos, carburetors, starters and generators using the finest of parts and equipment.

Our machine shop is the best equipped of its kind, with cam and cylinder grinder, balancing machines and much, much more.

Aero-Engines is the home of the Super 600, officially known as the Vintage Radials altered Pratt & Whitney R-1340.

The engine incorporates a modified version of Pratt & Whitney R-2800 cylinders, thus increasing reliability and performance of the engine.

The increased cooling fin capacity, higher rated manifold pressure, larger valves, forged heads, higher horsepower rating and increased compression ratio of the R-2800 cylinders is quite an improvement over the original R-1340 cylinders. The Super 600 engine, approved under STC SE01200LA, is rated at the same horsepower as the stock R-1340, but operators of the 25 engines in existence believe there are some “hidden horses” that can provide a boost when needed.

Presently these engines are being used on Air Tractors, Ag-Cats and Thrush aircraft.

We serve you with pleasure; confident we can supply you with the quality engine to suit your needs.

Contacts: Otis N. Perera, President Tony B Ortega, Chief Inspector

Visit AERO ENGINES Booth #528

511

CP Products

Booth

Paying attention to nozzle and check valve care Even CP® Nozzles and Check Valves don’t last forever and they do need maintenance. If there were such a thing as an airworthiness directive for aerial spray equipment, more attention would be paid to nozzle and check valve care.

There are several ways to determine whether maintenance is needed.

First, just look at them. Are they cracked? Are the deflector edges rough?

Do the flat fan stainless inserts still have an even elliptical shape? Do they drip?

Second, charge the boom. Is the spray even on each of the nozzles? Do the check valves shut quickly on all the nozzles? Check all the deflector angles on CP-03/09s. Are the patterns even with no breaks? On CP-11TTs, do the tips still have a good pattern and appear to be flowing the same?

Third, flow check the orifices and tips.

Are the flow rates even, nozzle to nozzle?

Are they close to what they were when new?

If nozzle or check valve bodies are cracked, they will leak and should be replaced. If deflector surfaces are nicked, patterns will be irregular and droplet spectra will change. Deflectors can be replaced. Stainless inserts in flat fan tips wear out and the wear will be uneven.

The patterns and flow rates won’t be as accurate as those in good shape.

Replacement flat fan tips are available.

If nozzles drip and the cause is not cracked bodies, debris or loose tension, chances are the white Teflon® seals are scratched. Seals are available. On CP-03/09s, the beveled side of the seals goes against the body (remember “B” to “B”). Seals on the CP-11TT cannot be installed backward. Before taking

CP-11TTs apart, put a shop rag on the table so that the detent ball isn’t lost.

Before reassembling them, lubricate the detent hole with marine grease or similar product.

Check valve maintenance should be done annually.

The Company uses torque wrenches when assembling nozzles and swivels. The wrenches are set at 15” pounds. Failure to tighten nozzle bodies may cause leaking or contamination of the Teflon® body seals. Too much tension on the nuts may cause the studs to pull. Replacement of the nozzles is the only option, if that happens.

Check valve maintenance should be done at least annually. There is one o-ring in the stainless core and one on the needle just under the diaphragms.

There is one Teflon® seal and one Viton seal on the needle. All these parts should be replaced. Be sure the cap is very tight after replacing the parts.

Do a “catch” test to verify the nozzles are flowing correctly. Both CP-03/09 orifices and tip stainless inserts will eventually wear. Gradual decreases in pressure required to do common rates indicates wear on those parts. They should be replaced.

The most important component of nozzle and check valve maintenance is the care given throughout the season.

Keep them clean and debris free and they will last a very long time.

or Just starting out?

CP’s Nozzles are the BEST CHOICE! Which nozzles will work best for you?

CP-11TT #25 40° Flat Fan 5 gpm—40 psi

CP-07 and CP-09 CP-03 0.125 Orifice, 0 Deflector 0.125 Orifice, 30° 5 gpm—40 psi Deflector 5 gpm—40 psi

% under 200 Microns

% under 200 Microns

% under 200 Microns

160 mph

11.3%

28.9%

55.0%

150 mph

8.0

21.0

40.5

140 mph

5.4

14.6

28.8

130 mph

3.5

9.6

19.8

120 mph

2.3

6.1

13.6

*Based on Spray Nozzle Models, USDA ARS AH-726, I. W. Kirk Settings: all at 40 psi, 5 gpm rate; CP-11TT—4025 tip, 8° Default Angle; CP-09/07—.125 orifice, 0° Deflection; CP-03—.125 orifice, 30° Deflection

MAINTENANCE is a MUST! even with CP’s!!!

Keep your CP® Nozzles and Check Valves in top shape.

Replace seals and O-rings annually.

®

Toll Free 866 303-0600 www.cpproductsinc.com 19th Annual NAAA Convention Show Guide

37 E

317

GE Aviation

Booth

GE Aviation’s H80 turboprop engine completes certification testing GE Aviation has completed all engine certification testing, including design assurance, development, operability and environmental tests, for its new H80 turboprop engines.

“The H80 engine has performed extremely well in ground certification testing at GE’s Prague facility in the Czech Republic. GE Aviation has accumulated more than 800 ground test hours and more than 10,000 cycles on the development engines,” said Paul Theofan, president and managing executive of GE Aviation’s Business & General Aviation Turboprops. “Flight testing continues on the Thrush 510G aircraft, and we look forward to entry into service in the coming months.”

The development program consisted of more than 25 full or partial engine builds, with testing that included lowcycle fatigue, hot section endurance, operability, component and endurance testing. The H80 engine will be GE’s first engine to be developed and manufactured outside the US and its first engine to receive European Aviation Safety Agency (EASA) certification before the US Federal Aviation Administration’s (FAA) certification.

The H80 engine combines the elegant, robust design of the M601 engine with GE’s 3-D aerodynamic design techniques and advanced materials to create a more powerful, fuel-efficient, durable engine compared with the M601 engine, with no fuel nozzle inspections and no hot section inspection. The H80 engine will also feature an extended service life of 3,600 flight-hours or 6,600 cycles between overhauls, significantly enhanced hot-day takeoff performance and high-altitude cruise speeds. The H80

will provide the option of a single- or dual-acting governor, allowing customers the flexibility in propeller selection.

Beyond the Thrush 510G application, the H80 engine will also power Aircraft Industries’ L410-UVP-E20, a twin-engine commuter aircraft, and Technoavia’s newly designed Rysachok aircraft, a twinengine, 10-seat general aviation aircraft.

The Business & General Aviation Turboprops team has continued its efforts to expand its customer and product support offerings. Premier Turbines is the Designated Repair Center in North and South America for M601 and H80 turboprop engines and offers heavy repair services, exchange engines and rentals, line replacement unit (LRU) rotable pools and field service support to current M601 and future H80 customers.

In 2011, GE Aviation signed Authorized Service Center agreements with Alagro Fumigaciones in Argentina, Solo Aviation in Venezuela, TAM Aviacao Executiva in Brazil, AG Aero in Australia and Cutter Aviation within the Southwest US. These facilities join other H80 and M601 Authorized Services Centers, including Smyrna Air Center in Tennessee, Cascade Aircraft Conversions in Washington State, Winnipeg River Aircraft in Manitoba, Canada, and Sky Tractor Supply Company in North Dakota. The Authorized Service Centers for M601 and H80 engine families offer comprehensive line maintenance, removals and reinstallations of engines and LRUs and engine spares. Extensive engine overhauls will continue to be performed at GE’s Czech facility in Prague.

M601E training courses continue at GE Aviation’s Customer Technical Education Center in Cincinnati, Ohio.

The Air Transport Authority (ATA) level III course includes classroom and hands-on training for line maintenance mechanics and aircraft operators.

GE Aviation, an operating unit of GE (NYSE: GE), is a world-leading provider of jet and turboprop engines, components and integrated systems for commercial, military, business and general aviation aircraft. GE Aviation has a global service network to support these offerings.

For more information, visit us at www. ge.com/aviation. Follow GE Aviation on Twitter at http://twitter.com/GEAviation and YouTube at http://www.youtube. com/user/GEAviation.

See GE Aviation at Booth #317 in Las Vegas 38 E

agairupdate.com

GE Aviation

GE is making a big splash in the turboprop market.

Finally, you have a choice. The GE H80 turboprop engine is loaded with performance features that provide real advantage—and a compelling new option from a world leader in aviation.

With industry-leading maintenance simplicity, including no HSI requirement or fuel nozzles, owners and operators will enjoy signiďŹ cant savings over the life of the engine. Compatible with all propeller types, the H80 also delivers the horsepower and time before overhaul that rivals leading turboprop engines. And by applying GE’s legacy of innovation in commercial and military engine technology and renowned services and support, the H80 comes with the reliability and peace-of-mind that only GE can provide.

For more information, contact Greg James Ryan at 954.292.5312 in North America or Michal Ptacnik at +420.222.538.701 in Europe.

19th Annual NAAA Convention Show Guide 68098_bga_h80_bigsplash_aau_11.indd 1

39 E 10/12/11 3:01 PM

717

Hemisphere GPS

Booth

Hemisphere GPS aerial application products Hemisphere GPS develops the world’s most advanced GPS Guidance computers and Flow Control products for the aerial application market. As a technology leader, Hemisphere GPS offers simple and advanced systems, and an arrangement of services that are versatile, flexible and easy to use. Whether in the aircraft, in the field, at the airstrip, or evaluating the performance of the overall aerial business, Hemisphere GPS provides the most complete tools for the job.

Satloc G4

With connectivity playing such a large role in making modern businesses more efficient, it only makes sense to extend this capability to a company’s aircraft. To enable this, Hemisphere GPS is releasing the Satloc® G4™ and making connectivity available within the guidance system itself. Now, with this functionality on-board, the G4 represents a paradigm shift in precision guidance systems and computers; it is no longer just about the GPS. The G4 allows users to transfer logs wirelessly, accept job files through the use of the internet, remotely access the guidance system from the office and directly communicate to the guidance system through the audio and video capabilities of Skype. The hardware and software available in the Satloc G4 represent an entirely new level of guidance system. It is the most complete and advanced aerial guidance system for aerial applicators.

The Satloc G4 is built with the topof-the-line processing power of the Intel® Core™ i7 processor and includes Microsoft’s Windows® 7 64-bit operating system. It features 2 x 32GB SATA drives and 4GB RAM DDR3 with an additional integrated video graphics adapter. The system offers 5 USB ports, which includes a remote HUB offering 3 powered USB ports for mounting in the cockpit.

40 E

agairupdate.com

Other features include a high bright 9-inch, 16:9 ratio touchscreen capable of providing faster video graphics as well as the latest in touchscreen technology.

Use multi-touch gestures such as pinch-tozoom, rotate and press and drag to access information. Experience improved speed for downloading job and shape files and prescription maps. The Satloc G4 features internet connectivity through cell-based technology.

Background maps are also available with Satloc G4 systems. Maps enhance situational awareness and confidence by allowing aerial applicators to view their flight information such as spray, waypoints, and polygons on top of an assortment of background data. Users can choose from a variety of map options and areas.

With the G4, the pilot can stay connected through HQ™, a real-time web-based asset tracking tool that allows companies to track the position and position-related data of aircraft and other assets, such as spotter vehicles and loader trucks.

Satloc Bantam

The Satloc Bantam provides state-of-theart GPS guidance for aerial applicators.

Available with AirTrac™ guidance software, the Satloc Bantam allows you to fly and spray precise patterns using constant rate flow control, reducing fuel, flying time, and application costs.

The Satloc Bantam guidance system features a real-time moving map display that provides visual guidance, and shows key features such as swaths sprayed, field boundaries, skips and overlaps, mark points, waypoint and polygons. The AirTrac software (modelled after Hemisphere GPS’ M3 system) allows you to track acreage sprayed, analyze log data, view range and bearing to remote points or fields, amd monitor application rates.

HQ

HQ™ is a real-time, web-based, assettracking tool that allows companies to track the position and position-related data of aircraft and other assets, such as spotter vehicles and loader trucks.

Combining a cell-based or Iridium® satellite-based modem with Hemisphere GPS’ own Satloc G4, Satloc Bantam or IntelliStar™, HQ provides the ability to more effectively coordinate flight plans and estimate arrival times, resulting in increased job efficiency, reduced workload and lower costs.

HQ is ideally suited for companies that need to track multiple aircraft in flight at the same time. The Hemisphere GPS-managed web server stores all flight and asset information, allowing customers to view current flight data as well as all historical data from previously completed flights. Aerial application companies can also provide their customers the access to log in via the web interface to view spray on/ off, spray rates, and latitude/longitude information to quickly analyze what jobs are being done, what is being planned and exact times of when jobs are started and completed.

Users can also produce Spray Reports for themselves or their customers. HQ allows the entire business to realize greater efficiency and safety through improved flight planning and better ground crew preparation.

background maps

Street Map

Sectional Chart Background Maps, the first software mapping application for use in the aerial application market, enhances flight navigation and confidence by allowing aerial applicators to view flight information such as spray, waypoints, and polygons on background maps.

Street maps or sectional charts can be used in either 2D or 3D mode and can load together to view as sequential mapping pages. Background Maps are available on the Satloc G4 and IntelliStar systems.

imagery Aerial imagery can expose a great deal about soil and crop conditions.

The “bird’s eye” view an aerial image provides, combined with field knowledge, allows growers to observe issues that affect yield. Our imagery technology enhances the ability to be proactive and recognize a problematic area, thus minimizing yield loss and limiting exposure to other areas of your field.

Hemisphere GPS offers the ability to take infrared imagery and process into rate maps in a minimal amount of time.

And because of the technology used

by Hemisphere GPS, aerial imagery is over 30 times more detailed than any commercially available satellite imagery.

Hemisphere GPS’ advanced aerial imagery provides a snapshot of various crop conditions such as: • Crop stress • Herbicide damage • Variable rate images For more information on Hemisphere GPS and their products, please visit their website at www.hemispheregps.com and follow them on Twitter and YouTube.

The Next Generation of Aerial Guidance Systems

See us at NAAA! Booth #717

®

Hemisphere

Featuring: • Intel® Core™ i7 processor • Windows® 7 operating system • New Crescent SX-2E receiver inside with improved G-Force handling • 7” or 9“ LVDS multi-touch screen options • Access system remotely through Internet • Receive files onboard from Internet • Data Sharing with AgSync & Flight Plan Online™ • Live onboard video & calling through Internet • HQ compatible Optional on-board mapping (Open Street Maps)

19th Annual NAAA Convention Show Guide

41 E

807

Air Tractor, Inc.

Booth

Meet the people behind the planes As aerial applicators and others involved in agricultural aviation gather in Las Vegas, a “to-do item” for many will be to stop by the Air Tractor exhibit during the NAAA Exposition. As in years past, visitors will see several familiar faces beneath the circling Air Tractor model airplane. Sadly though, one well-known face will be missed. In the early days of Air Tractor, Leland Snow was “the main man.” He wore many hats and did many jobs, from purchasing and engineering to the final “shake-down” inspection and even delivery of the aircraft to the customer. As the company grew he delegated many of these responsibilities and built a strong management team. He relied on

the experience, knowledge, and strengths of these employees to keep things running smoothly under his guidance. Now that he is gone, these people, along with the rest of the 260 employee-owners of Air Tractor are carrying on Leland’s vision to build the world’s best ag aircraft. We thought you might like to see and learn about a few of the people “behind the scenes,” who play a big part in keeping aircraft rolling out the doors and flying over farmland in America and around the globe. So here’s a run down of some of the other faces of Air Tractor, the people behind the friendly voice on the phone or the e-mail address who work to make Air Tractor second to none.

Jim Hirsch Air Tractor President Years at Air Tractor: 19 Now some nine months into his new role, Jim Hirsch says the company continues with the new product initiatives begun by Leland Snow.

Jim is directing product engineering and working with Air Tractor’s management team on strategic planning. “These several past months of my transition –- and for all of us at Air Tractor -- were made a lot easier because Leland, not surprisingly, had a well thought-out succession plan that left us in a strong position. So we’re ‘workin’ the plan’ as we move into 2012.”

Rick Turner Vice President Operations Years at Air Tractor: 24

Rick keeps a constant eye on Air Tractor’s aircraft production schedule, seeing that the myriad of raw materials, parts, component systems, and labor for nine aircraft models all come together on the Air Tractor assembly lines to keep airplanes moving toward their completion and timely delivery to Air Tractor dealers. Rick says 141 aircraft will roll out the doors by the end of this year, and he projects another record production run of 175 aircraft in 2012.

David Ickert Vice President Finance Years at Air Tractor: 22 Financing is a crucial part of any aircraft order, and David Ickert has worked for many years to provide U.S. and international Air Tractor customers a variety of commercial and import/export financing options to help close the deal. Today, international sales comprise more than 50 percent of new Air Tractor sales, which translates into 260 quality jobs that remain here in the United States.

Kristin Edwards Vice President Sales Years at Air Tractor: 19 Rising crop commodity prices for the past several years have been a catalyst for new ag aircraft purchases. And Kristin Edwards is working to assure that where there’s an interest in new agricultural aircraft, an Air Tractor dealer is not far away. To that end, Air Tractor had a major presence at the South American Ag Convention in June, with three Air Tractor dealers represented at the event, which is the largest agricultural aviation convention in South America.

42 E

agairupdate.com

Leon Clinton Vice President Machining Operations Years at Air Tractor: 19 The machining of parts produced at Air Tractor and at the company’s subcontractor machine shops are the responsibility of Leon Clinton. He not only oversees machining operations, but also writes the specs, approves purchase orders and assures the metallurgical integrity of steel used in critical components such as spar caps and landing gear. From one day to the next, Leon is working to reduce the time and cost of producing parts while improving their quality, uniformity and service life.

For the past 15 years Leon has directed Air Tractor’s turbine engine project.

David Ligon Engineering Manager Years at Air Tractor: 10 As Engineering Manager at Air Tractor, David Ligon directs and supervises engineering and design projects at Air Tractor. David has been a Project Engineer at Air Tractor for almost 11 years. He has been closely involved in the development of some of Air Tractor’s most notable new aircraft, including the Air Tractor AT-504 two-seat trainer, the AT-1002 1000-gallon capacity aerial application aircraft, and the AT-802U utility aircraft.

Jeff Dobbs Customer Service Manager Years at Air Tractor: 16 Jeff Dobbs says the favorite part about his job is talking with Air Tractor owners and dealers from around the world and getting to know them better. Jeff is the “go-to guy” for spare parts or customer service. Beyond getting parts shipped and delivered when they’re needed to all points of the globe, he can bring to bear the expertise of Air Tractor’s customer service team to help with aftermarket parts inquiries and technical questions.

Mike Rhodes Chief Pilot Years at Air Tractor: 10 Spending just about as much time in the air as he does on the ground, Mike Rhodes is the production line and experimental flight test pilot at Air Tractor. He’s been with the company since 2001. His early years at Air Tractor were spent in the engineering department. Today, Mike’s aeronautical engineering background, analytical skills and flying ability help assure that Air Tractor aircraft are safe, productive and that they all perform as they were designed to do.

Robert Salyers Quality Manager

Donald Cagle Senior Group Leader Years at Air Tractor: 35 One of three Senior Group Leaders at Air Tractor, Don Cagle oversees Plant 1 production of AT-402, AT-502, AT-504 and AT-602 aircraft. He is also the group leader of Air Tractor’s weld shop.

Mike Kimbro Senior Group Leader Years at Air Tractor: 36 Plant 2 and Plant 2A are where the big AT-802 is built and assembled, and Mike Kimbro keeps those lines moving and the 802 aircraft rolling out the door. Mike is also in charge of the wing fabrication shop at Air Tractor.

In May, Robert (Bob) Salyers moved into the Quality Manager role at Air Tractor.

A familiar face in ag aviation circles for many years, Salyers brings a wealth of aviation experience to the job, and a sharp focus on maintaining Air Tractor’s long-standing reputation for consistent high quality. Salyers’ duties include responsibility for maintaining product quality across the entire Air Tractor line and assuring that aircraft are in full compliance with all FAA regulations.

Bo Snyder Senior Group Leader Years at Air Tractor: 37 Bo Snyder works in Air Tractor’s R&D department, where the AT-1002 and AT-802U are currently being refined.

With decades of experience and skill as a master sheet-metal fabricator and mechanic, Bo works on continuing improvements that are incorporated into new Air Tractor aircraft.

19th Annual NAAA Convention Show Guide

43 E

822

Farm Air, Inc.

Booth

Committed to customer service Farm Air’s commitment to customer service is evidenced by its 150’ X 120’ hangar which includes a 30’ X 120’ parts department with a second floor storage area housing an extensive inventory, and an on-site maintenance shop. While normal office hours for the parts department are 8:00 AM to 4:00 PM Monday through Friday, during the heavy work season the parts manager, Randy, has the Farm Air phone forwarded to his cell so he and if needed, a mechanic, can respond to your after-hours AOG situation.

Our maintenance shop, (excluding

44 E

agairupdate.com

heavy engine maintenance), has been Air Tractor certified to rebuild wings, conduct eddy current inspections, and replace wing spar caps. Farm Air is also a certified AmSafe installer for Air Tractor airbags.

It is our desire to have the parts and people you need, when you need them.

While our inventory is quite impressive, if we don’t have a part in stock, we can have the factory drop ship the parts overnight. Our total focus is to keep you working. We strive to be your one-stop parts and service location.

In addition to Air Tractor planes and

parts, Farm Air sells and services Flight Grip pistol grips, with the assorted switches and buttons, Automatic Flagman supplies, Satloc GPS systems, Hatfield Fuel Flow systems, Transland pumps, booms, spreaders, valves, and rebuild kits. We also carry Stainless Steel Fabricators spreaders. We carry a good assortment of CP spray nozzles, and the associated plumbing, and hoses, and clamps for your dispersal equipment.

Last but not least, our ¾ mile long grass strip, (IS08 Lat 40° 15.649’ Long 90°14.306’), and easy access via IL Rt. 24 and county highway 10, (Bricker

Highway), give customers the option of picking up their parts, or having us ship to your work site.

Over 35 years of experience as an operator gives Harley Curless a unique understanding of the demands placed on operators and their equipment. He has set an expectation for his entire staff of providing an unrivaled level of customer satisfaction. Every member of our team is committed to delivering superior customer service. Be sure to stop by our booth while at the NAAA conference in Las Vegas.

19th Annual NAAA Convention Show Guide

45 E

UNIVERSAL TURBINE PARTS, INC.

PT6

Stocking distributor of PT6, JT15D & PW100 parts and engines • NEW, OH and SV condition We buy TURBINE AIRCRAFT, ENGINES and INVENTORY. We manage ENGINE OVERHAULS and REPAIRS.

120 Grouby Airport Road Prattville, Alabama 36067 T 334 361 7853 F 334 361 0290 sales@UTPparts.com

46 E

agairupdate.com

Universal Turbine Parts

Worldwide supplier for many turbine engines Universal Turbine Parts is the premier independent supplier of PT6, JT15D, and PW100 turbine engines and components in the world. We provide exchanges and outright sales on a wide variety of engine models and on aftermarket turbine parts.

Our customer and supplier base is made up of the best-known names in the small gas turbine engine industry.

The repair vendors supporting Universal Turbine Parts are all FAA

certificated repair stations performing the highest quality turbine engine part repairs available.

Universal Turbine Parts is ASA100 certified in order to meet the requirements of FAA AC 00-56. We provide our customers with high quality turbine engines and engine components and replacement parts and full documentation to support their installation.

203

Kugler Company

Booth

Kugler KQ-XRN® is just plane smart Often, the best time for foliar application of fertilizer coincides with recommended spraying time for crop protection chemicals including herbicides, pesticides and fungicides.

That’s good news for aerial applicators who want to improve results for their customers.

Kugler KQ-XRN is The Perfect Delivery System™ for a wide range of crop protection chemicals. By using Kugler KQ-XRN as your carrier (instead of water), you give your customers’ crops a powerful and long-lasting fertility boost as you address pest or disease situations.

Kugler KQ-XRN is noncorrosive and very

The convenience of mixing Kugler KQ-XRN with crop protection products leads to greater efficiency and better results. Your customers will literally see the difference—and your pass across the field will increase in value for both you and your customers.

KUGLER KQ -XRN

®

It’s just plane smart.

equipment friendly. It’s remarkably easy to handle and easy to apply. Better yet, Kugler KQ-XRN is non-burning, even at high application rates—so you reduce the risk of damaging your customers’ crop.

“You can’t find a slow release nitrogen product that’s easier to handle and easier on the equipment.

We piggyback aerial applications of KQ-XRN with fungicides with good results. No other products fit our system as well as Kugler products.”

Mason Hansen Kugler Dealer Flagler, CO \ High quality 28% nitrogen solution (with 72% slow release N) \ The Perfect Delivery System™ for crop protection chemicals \ Super adhesion keeps fertilizer & chemicals on the plants longer

Kugler KQ-XRN coats the leaf with a clear film that stays on the job for weeks—penetrating the waxy layer of any leaf tissue to deliver nitrogen over the long term as the plant needs it.

Your customers will see a quick greenup and continued plant performance as the nitrogen is absorbed over the weeks to come.

The unique adhesion characteristics of KQ-XRN means that it also sticks to weed leaves. In the case of herbicides such as glyphosates, Kugler KQ-XRN technology is The Perfect Delivery System™ for achieving optimum penetration on weeds and improving control.

\ Equipment friendly; non-corrosive See what growers are saying about Kugler KQ-XRN at: www.KQXRN.com

1.800.445.9116 \ www.KuglerCompan y.com

19th Annual NAAA Convention Show Guide

47 E

223

BASF

223 BASF Three keys to proper off-season Three keys to proper off-season preparation forapplicators applicators preparation for Booth

BOOTH

Important to be ready for a demanding 2012 Aerial applicators around the country spend a great deal of the off-season months planning ahead for the start of their season, a change in crops to be sprayed, or perhaps a heightened demand for their services. Tony Goede, BASF Aerial Manager, indicates that for the upcoming application season, being prepared is as important as ever.

“We’ve noticed a heightened demand for products that will be applied aerially next season,” Goede said.

“And that means applicators are going to be busy making sure they have everything lined up well in advance. This year could be as busy or busier than any in recent history.”

Below, Goede shares three preparation tips applicators should consider annually.

1. AGGRESSIVELY CHECK EQUIPMENT AND CALIBRATION Aerial applicators should ensure they and their equipment are ready for the upcoming season by attending events such as the annual Operation S.A.F.E. (Self-Regulating Application and Flight Efficiency) fly-ins held around the country.

Operation S.A.F.E. clinics provide operators and pilots an opportunity to test equipment with a trained analyst to help interpret the information and recommend changes to improve performance. Held regularly throughout the year, the fly-ins help applicators learn about and comply with all pertinent legal requirements.

“Applicators can attend Operation S.A.F.E. fly-ins to ensure their equipment is calibrated and their planes are in top working condition,” Goede said. “Fly-ins are a great opportunity for applicators and one of the best means of evaluating spray patterns, droplet size and application precision to maximize performance and stewardship.”

48 E

agairupdate.com

2. GET COMFORTABLE WITH NEW TECHNIQUES The old adage, “the only constant is change,” definitely applies to aerial application. Applicators should be as prepared as possible for change. Goede recommends applicators spend extra time learning the ins and outs of new equipment and products.

“We expect applicators to increase their reliance on work order management systems to help manage orders and map field locations,” Goede said. “To get comfortable with the system, work with your retailers in advance of the application season.”

Goede explains it’s important to acknowledge and prepare for treatment trends among growers as well.

“We saw an increase in the percentage of acres sprayed this year, and we expect that number to increase in 2012 as well,” he said. “Make sure the loading crew and everyone involved is aware of the correct product rates and reviews the label for proper application.”

3. OPEN THE LINES OF COMMUNICATION Planning ahead is about more than just getting equipment and oneself ready for the season — it’s also important to prepare those you’ll be working together with. Often, simply planning ahead and communicating early with retailers and growers to envision future scheduling will help enhance the relationship.

“Pre-scheduling and building a reputation with retailers is becoming a necessity for successful applicators,” Goede said. “Communicating with your business partners can help turn an average season into a great one.”

BASF SUPPORTS AERIAL APPLICATION INDUSTRY BASF has committed to supporting the aerial application industry through a variety of activities to continually educate applicators and increase safety within the industry.

Through Operation S.A.F.E. fly-ins and scholarship opportunities, BASF continues to support the industry’s growing future.

The BASF scholarship program is another way BASF is helping build the future of agricultural aviation, and is an integral part of the BASF partnership with NAAA (National Agricultural Aviation Association). This scholarship is designed to help NAAA operators bring new pilots into the field and help in their training to become part of the aerial application industry.

“Our support of the scholarship program and the fly-ins is designed to give applicators a great start, and then keep them focused on safety and advancements throughout their career,” said Gary Fellows, Ph.D., BASF Technical Service Fungicide Manager, and active member of the NAAREF (National Agricultural Aviation Research & Education Foundation) PAASS (Professional Aerial Applicators’ Support System) Program development committee. “BASF understands that an investment in great professionals is as important as investment in great products.

That’s why it’s important for us to have meaningful partnerships with industry leaders.”

Along with offering reliable, effective products, these programs are part of ongoing stewardship efforts for aerial applicators and the safe and proper application of products.

Visit www.plant-health-pilots.com to learn about the resources and programs for aerial applicators, supported by BASF.

THE SAME FUNGICIDE THAT LIFTS YIELDS FOR CORN GROWERS CAN ALSO LIFT YOUR BUSINESS.

Headline AMP™ fungicide combines the proven power of Headline® fungicide with a unique triazole for corn that stops diseases in their tracks. And independent trials demonstrate that Headline AMP delivered more bushels of corn per acre than any other fungicide.* Your ultimate success can depend on the performance of the fungicide you apply. So use Headline AMP, and your business can take off too.

Visit HeadlineAMP.com or talk to your authorized BASF retailer today.

*Results summary 34 university and seed company small-plot replicated trials conducted 2007-2010 Always read and follow label directions. ©2011 BASF Corporation. All Rights Reserved.

APN 11-01-268-0011

19th Annual NAAA Convention Show Guide

49 E

804

PARMA

Booth

PROAIR RRG expects to pay 20% dividend to its insureds LAS VEGAS, NV – PROAIR Risk Retention Group announced that its members should expect to receive cash back of about 20 percent of their base liability premium at the end of 2011. “Our members have controlled and reduced their losses this year and so, barring any major change before year-end, PROAIR RRG members will each receive a distribution on a per aircraft basis of about $700.00. This proves the concept of paying real dollars back to members for being safe,” comments Trevor Edwards, PARMA organizer, Attorney-in-Fact for PROAIR and Director of PROAIR RRG. “This financial reward is due to the excellent safety and claims record that our PROAIR RRG insureds achieved during the past year,” says Edwards.

“While other aerial applicators saw steady or increasing risk management costs, PARMA members who joined PROAIR RRG will see a check in their hands at the end of 2011.”

Membership in the Professional

Aviation Risk Management Association (PARMA) is steadily growing as Air Tractor operators join PARMA to help develop safer operations and reduce their operating costs. Trevor Edwards, reports, “It’s been a good year for PROAIR RRG. Aerial spraying operators are seeing how the program makes sense for them. Now that we’ve been operating for four years, I’m hopeful that we’ll see more aerial applicators discard their ‘wait and see’ attitude and join PARMA.” Nevada-based PARMA was created in 2007 to provide risk management programs and services for the ag aviation business and to assist operators in implementing “best practices.”

A key benefit of PARMA membership is the PROAIR insurance program, which consists of Professional Aviation Insurance Reciprocal and PROAIR Risk Retention Group, Inc. These two captive insurance businesses provide hull and liability coverage to PARMA members.

The insurance is funded and controlled

by PARMA members, who are also the principal insureds. The owners/insureds participate in setting underwriting guidelines, claims and investment decisions. PARMA also provides other member benefits, such as the Fly Right Safety Data program, a mapping service that identifies aerial obstacles, and the SPOT communication device that pilots can carry while they work.

Aerial spraying operators are seeing how the program makes sense for them.

Tim Whitfield of Whitfield Aviation in Fairfield, North Carolina joined PARMA in its first year. He says it was something that made sense. “We’ve had a pretty clean claim record over the years,

and when I heard about PARMA and PROAIR, it appealed to me. Even though at the start PARMA didn’t offer much of an advantage over what my insurance agent offered, I could see that - in the long run, self insurance made a lot of economic sense,” says Whitfield. “Twenty years from now, I could have a heck of a retirement fund built in PROAIR. Or, I could pass those assets on to my son to provide him some added financial security as he takes over the business.”

Aerial spraying service operators are encouraged to visit the PARMA exhibit, (booths 804-806) fill out a membership application, and receive a quote during the National Agricultural Aviation Convention at the Las Vegas Convention Center.

Additional information about the Professional Aviation Risk Management Association, and an online membership application can be downloaded at www. flyparma.com. Or, call Trevor Edwards at 1-800-717-7504.

huNtiNG for a Better riSk maNaGemeNt plaN?

See uS at Naaa! BoothS 804-806

Give us a try! Go to flyparma.com for the facts.

a cooperative riSk maNaGemeNt proGram for Safety-coNSciouS operatorS. memBerShip BeNefitS iNclude Spot, air evac life team Service & fly riGht Safety data.

JoiN parma : take coNtrol of your coStS. Toll-Free : 800-717-7504 • 9550 S. eaSTern ave., STe. 253 // laS vegaS, nv 89123 50 E

agairupdate.com

North Star Aviation

Offers a wide variety of service Located in Ulysses, Kansas, North Star Aviation is your full maintenance facility offering top quality services.

Our mission is to provide safe, reliable and high quality aircraft maintenance for our customers. To do this we employ six full time mechanics. All of our mechanics are FAA A&P Certified, two of which are A&P I/A Certified.

Thrush aircraft. We offer a wide variety of services on airframe and powerplant including, Annual Inspection, Hot Section Inspection, Gear Box Inspection, 100 Hour, Nozzle Cleaning and Flowing, Aircraft Recovery and Refurbishment.

Maintaining a large inventory of Air Tractor and Thrush parts, we are able to get our customers back in the air quickly. We strive to be a one stop shop for all your Air Tractor and Thrush needs!

North Star Aviation maintains a large fleet of turbine powered Air Tractor and Thrush aircraft. 

North Star Aviation is now owned and operated by Steve and Samantha Rice. We maintain a large fleet of turbine powered Air Tractor and

  

Annual Inspection Hot Section Inspection Gear Box Inspection Nozzle Cleaning & Flowing

   

100 Hour Inspection Eddy Current Inspection Aircraft Recovery Aircraft Refurbishment

USAg Recycling, Inc. Specializing in recycling plastic agricultural containers.

DEALER/SERVICE

For more Information or to Schedule a Pick-Up Call Us.

800-654-3145 We are the Environmentally Responsible solution to your agricultural container management problems. www.USAgRecycling.com

801 W Airport Blvd.,Ulysses, KS 67880 888-272-1417 Toll Free, 620-356-4528 Local, 620-356-3864 Fax srice@pld.com www. northstaraviationinc.com 19th Annual NAAA Convention Show Guide

51 E

Serving agricultural aviation for 59 years

Authorized distributor for Air Tractor, Southeastern Aircraft Sales offers new and used aircraft, parts and service. Now in our 59th year, our reputation has been built on honesty and integrity. We would welcome the opportunity to be of service to you and your company.

Visit us at booth #1015

Aircraft Sales & Service, Inc. Fort Pierce, Florida

Our 59th year serving agricultural aviation Sales • Service • Parts

800-441-2964

Office 772-461-8924 • Fax 772-461-9050 52 E

agairupdate.com

706

AgriData

Booth

Surety puts precision and efficiency on the map Surety Customized Online Mapping continues to make a name for itself, as it helps more and more aerial applicators increase accuracy and productivity.

This innovative online mapping system provides a method of easily defining and utilizing custom maps and reports to locate fields for chemical or fertilizer application.

With the Surety system, the benefits are clear. Aerial applicators can create precise, custom maps using Surety’s combination of FSA field borders, aerial photography, acreage and more, to easily identify the right field and ensure the right application every time. This not only reduces mistakes and improves communication, but it also saves fuel.

In addition, Surety data can be downloaded and displayed on GPS units or software. Aerial applicators can

quickly locate target fields by simply selecting or custom-creating field borders, and then exporting them as shape files onto a PCMCIA card for display on a GPS unit. Aerial maps and application reports can be printed, as well. Plus, Surety is 100% online, meaning users can keep everything they need in one place and access it from home or the office.

Surety is a powerful tool for aerial applicators, but its value doesn’t stop there. Many other agribusinesses, such as farmers, insurance agents, crop consultants, rural appraisers, land managers and others, are taking advantage of its endless possibilities for mapping, reporting and trading information. Whether it’s mapping crop insurance data or personalizing reports with soil survey information, everyone is benefitting from Surety technology.

product will offer users all of the timeand money-saving components of the classic Surety system, but will include new features like saving field data and maps, advanced tools and additional maps.

For more information on Surety or Surety Pro, call 701-746-8580 or visit www.suretymaps.com. Plus, sign up today, and receive four free maps!

Surety Pro: The Future Of Precision Farming The makers of Surety are working on taking customized online mapping to a higher level with Surety Pro. This new

Sign Up For FREE Maps!

4

9

22/200

Aeria

l Map

New Pen & Ink Drawing

Comp

any: Agrida ta Inc Addre ss: 430 0 Jam Addre es Ra ss: Gra y Driv e nd For Phone ks, ND : 701 , 582 03 -746-8

580

licay: tiAgroidata Inc ppmp an

ical A

Chem

Co

ss: Addre 8-9963 701-88 Phone:

, 58203

ks, ND

nd For

ID: Field Corn Crop: 6.74 res: 35 ed Ac Mapp : 356.74 l Acres Actua al: Go Yield p: Wheat Cro us Previo : Stage Growth n: Fair Conditio Crop

Ordere

d: 10/ Invoic 22/200 e Numb 9 er:w3 Custo 213dd mer/ Contr Subactor: AA Aerial Addre Spray ss: 1212

Addre

7th

Ave N ss: Big Bend, Phone ND : 701

Owner

-858-9

/Opera

By Richard C. DeSpain

Owne

y Drive

es Ra

0 Jam ss: 430

Addre

ss: Gra Addre 6-8580 701-74 Phone:

Date

: 10/ dered Date Or er: e Numb ith Sam Sm eet rator: 4th Str r/Ope 2 North ss: 142 Addre

Invoic

ort n Rep

Addre

632

tor: Sam Sm

ith

Field

ss: 142 2 North Addre 4th Str ss: eet Phone : 701 -888-9 Field 963 ID:

:

Notes

Crop: Corn Mappe d Acres : 356.74 Actua l Acres : 356 Previo .74 us Cro p: Wh Growth eat Stage:

Maps

Mature

Field

Notes

:

Nelso

n, ND

Green

nter:

Pest

and Yel

low

Pesticid

e Spr

ay

Produc

t

47.882

Map

382,

Map Ce

r:

-98.21

5053

Maps

provid

n, ND lsoby: Need

ct

Produ

53

8.2150

382, -9

47.882

Cente

g. #

EPA Re

A.I.

12

Rate

50

Unit Oz

ed by:

provid

. 2007 ata, Inc com © AgriD nc. griDataI www.A Total r 37 Carrie 178

H20

2452

EPA Reg. 2452 # © Ag riD A.I. Applic e Spray Rate www.A ata, Inc. 200 Pest ator's Pesticid 12 griData 7 Unit 12 Name Inc.co and Yellow Oz : Hamm enm Carrie er, Jac Applic r Gre H20 ator's k - ND Total e: 0900 Da ID: 154 4280.9 Applic te of Start Tim 8763 ation: 10/ Wind e: 1000 22/200 Speed 9 9 Temp : End Tim Start 22/200 Applic eratur ator's ation: 10/ e Time: 090 Applic 67 Name 0 End Date of : Wind Time: 100 Applic Dir Cle 0 ator's ection ar Clear Acres : Da Applie Partly ID: Applic te of d: Cloudy d 154 ation: 300 Wind Applie Speed k - ND Desire e: 65 Cloudy Acres Temp : er, Jac Start d Wind: eratur ator's Applic eratur Temp Applic me: Hamm ator's e Time: Na Name End : ion: NW Wind Time: Applic Direct Direct Other: ator's 8763 Clear ator's ion: Wind Acres Applic ID: 154 Da Applie Trashy ID: Partly . d: Applic te of Cloudy Office atio Wind Dry Field n: 12 Speed Desire grapy Field Cloudy Temp : d Wind: Speed: Start Wet border Photo eratur Wind s pro Aerial e Time: vided ed by Rough

by Fa End provid y rm Se ph Wi gra Time: nd Dir rvice Good photo Agenc ection Clear Acres Aerial nditions: : y as of 8.

Co 00 ld Applie 3/2 5/23/2 Fie Partly d: of 5/2 008.

Cloudy Aerial ency as photog Desire rvice Ag Cloudy raphy d Wind: rm Se provid

by Fa ed by vided Aerial rs pro Photo borde grapy Field Field Office .

The Right Map Means Nothing Is Left To Chance Surety Online Mapping is designed to help your business increase accuracy, productivity and efficiency.

510 Thrush

• Surety utilizes Farm Service Agency (FSA) aerial images, acreage and field borders to combine aerial maps with legal descriptions, latitudes/longitudes and customer data into custom maps and reports.

• Surety offers nationwide coverage with easy-to-organize information and quick-to-identify field characteristics.

has them!

Limited Editions Signed & Numbered 1/100 $60.00 each, plus S&H To Order Call 478-987-2250 or Fax to 478-987-1836

d, go with Sur go to the fiel ety. u o y n W he

View Online at www.agairupdate.com click “AAU Marketplace” Postage & Handling $10.00 U.S. and Western Hemisphere. All other countries vary.

U.S. money order or check on U.S. bank,Visa or Mastercard accepted.

www.agridatainc.com/aau • 701-746-8580

19th Annual NAAA Convention Show Guide

53 E

Pratt & Whitney Canada

Celebrating 50 years

Mike Perodeau, VP, Marketing (corporate aviation and military programs), Pratt & Whitney Canada.

by Mike Perodeau In 2013, we’ll be celebrating a birthday at Pratt & Whitney Canada. Our PT6A engine will mark 50 years in service. It’s an engine that’s obviously well known

54 E

agairupdate.com

in NAAA circles and it has long been a favourite of the Ag industry.

Bragging about one’s age does have one drawback: people might start saying that you’re old. Since the PT6A and I are in roughly the same age category, it’s something to which I can relate, but truth be told the PT6 is getting better with time, while only my wife might say the same about me. While I am far less excited about my own age, I kind of like being the guy with an engine that has accumulated 350 million hours, that many have tried – unsuccessfully – to replicate, and that’s been the “go to” powerplant for more than 130 different applications.

When it comes to our iconic engine, what has been constant over the years is the name, the well deserved reputation for dependability, and the learning that comes from five decades of experience.

The technologies incorporated have of course continued to advance with each new model of the engine – there have

PT6 assembly

been 65 of them – we bring to market.

So we think of it as an always-new engine that just happens to have an established track record, making it the turboprop of choice for 6,500 operators in 170 countries around the world.

The stats behind the PT6 story are the envy of the industry and our competitors would love to be able to match them – but have a mountain to climb.

What we have noticed about many PT6 operators – and this is especially true in the ag sector – is that they tend to be independent thinkers who understand that value comes from the entire package that Pratt & Whitney Canada offers with every PT6; not only one of the finest engines ever made, but also readily available service and support almost anywhere in the world, backed by people who are passionate about keeping it the best in the business. The “culture” of the PT6, which our operators created and continue to foster, is one of the reasons we created a microsite devoted to the engine and

523 Booth

its “fans”. PT6nation.com has become an online meeting place where operators and enthusiasts can share their stories and experiences. It gives the PT6 community a collective voice and it’s one that we are keen on hearing.

The stories and sentiments we are gathering have been highly instructive, leading us to rethink the way in which we communicate the fundamental values of the PT6. By listening to our customers, we are best able to articulate the enduring strengths of the PT6 and what it means to them.

The PT6 engine is about choice – it has the versatility to power so many applications over the years because it come in a range of small, medium and large models, which in turn means it can serve diverse missions and performance requirements.

It’s about confidence when it comes to relying on an engine that has such a remarkable critical mass of flying experience – 10 times more flight hours than its closest competitor.

And the PT6 is about commitment, starting reliably each and every time, backed by the industry’s largest service and support network, with low, predictable operating costs and designed to keep you flying longer.

What we are discovering through the PT6 site, and through our forays into social media such as Facebook and Twitter, is that much like the engine itself, the PT6 story never gets old. It’s a constantly changing narrative that remains fresh.

Every year at Pratt & Whitney Canada we invest some $400 million in research and development, initiatives that are improving our current engines and creating the powerplants of tomorrow.

The PT6 engine will continue to benefit directly from these investments, ensuring that the legend remains the leader.

Like I said at the beginning, it’s good to own the engine that helped build the industry. It’s kind of nice to hold the standard that all others strive to reach, and to have literally thousands of satisfied customers. When you have that sort of following, birthdays aren’t that bad at all.

LEGENDARY. PROVEN. PRECISE. IS PROUDLY PT6.

Like the thousands of other PT6-powered aircraft operators, Top Hat Ag owner Stan Jones is proudly PT6. With 23,000 engines in flight, pilots trust the PT6 more than any other engine of its class.

Yet this remarkable engine hasn’t just made history. With continual technology improvements and rock-solid performance, it defines the future. Are you proudly PT6? Join the nation. At PT6Nation.com.

19th Annual NAAA Convention Show Guide 24356 PT6_Stan_AgAirUpdateIntEditionindd 1

55 E 9/6/11 3:28 PM

Client: Pratt & Whitney One Company Ad Title: PT6 Nation - Stan

923

AgSync

Booth

Aerial Business Management System It’s not just about maps anymore!

Aerial application has advanced far beyond obtaining a map to spray a field. Systems need to function together encompassing mapping, guidance, work orders, regulatory compliance, sensitive areas, inventory and accounting. AgSync offers web-based products designed to manage the wide range of complexities in the crop protection and fertilizer application process. Break through the barriers in communication, limited resources, and management to achieve greater efficiency. Strengthen your customer relationships and accomplish in minutes what used to take days.

AgSync has been working hard to provide faster more efficient solutions for your business. Our team has incorporated numerous changes this summer to ensure that your productivity and profit increase.

Our products range from a simple map to work order in seconds to a real-time system that synchronizes the relationship between growers, retailers, consultants, and applicators. There is an AgSync solution for your business model price range. As with every AgSync program, there is NO per acre fee. Know your costs at the beginning of the season and eliminate end of year surprises.

56 E

agairupdate.com

AgSync–Lite: Users can create a map and work order in seconds. The program is ideal for pilots, who spray the same fields regularly, need to quickly print work orders, provide maps for outside pilots, and prefer to communicate with growers over the phone, fax or email.

The four main features that make this an ideal mapping solution: ease of locating fields, the field database, and variety of maps available in the system and the ease of uploading .job, .no1, or shapefiles to a GPS unit. Cost for AgSync-Lite is $995 annually.

AgSync-Manager: Offers the same features as AgSync-Lite plus the ability to track order progress, utilize the CDMS crop protection product database, sort pesticide combinations, visually plan missions, track pesticides applied, and quickly build verification maps. This program is designed for aerial applicators to streamline application efficiency, organize record keeping, and build reports including pilot activity, pesticide volume, and invoicing. The added benefit is the ability to manage risk, liability, and regulatory compliance. Cost for AgSyncManager is $5000 annually.

TaskForce-Central: Operates with the

same functionality as AgSync-Manager plus it communicates with TaskForceR,C,G (Retailers, Consultants, Growers), programs in real-time. TaskForceCentral is ideal for aerial applicators with customers that need the flexibility to create, edit, submit and track orders at their convenience via email, or online using the TaskForce-R,C,G program.

Cost for TaskForce-Central is $8500 annual, for full connectivity, mission planning, and online reporting.

TaskForce-R,C,G: Equips Retailers, Consultants and Growers with the tools to effectively communicate in a single system with ground and aerial applicators. TaskForce-R,C,G enables you to create, organize, and edit orders.

Send orders to applicator with a click of a button, gain instant access to field completion records, as applied verification maps, and application reports for quick invoicing. Cost for AgSync-R,C,G, Retailers ($3000 annually), Consultants ($3000 annually), and Growers ($500 annually).

AgSync offers online tutorials, online training, and onsite training for you and your customers, if necessary. Tech

support is available year round with 24/7 support during peak season.

Securely managing data is a toppriority and the platform that AgSync was built upon. Each users name and account is password protected. Data is accessed through an encrypted secure server and belongs to the subscriber only. AgSync data can only be accessed by licensee and those given permission by the licensee.

AgSync is committed to providing the tools to help aerial application continue to be safe, accurate, and more efficient. Regardless of size, locations or experience, AgSync has a solution for you!

Call AgSync today to discuss your needs, or better yet, come and visit us at the 45th NAAA Convention in Las Vegas, booth #923.

AgSync, Inc. 877-923-5832 agsync.com

19th Annual NAAA Convention Show Guide

57 E

408

TracMap

Booth

New software and distribution base for TracMap GPS guidance business TracMap has consolidated its rapid growth in the North American market, recently opening a distribution base near Atlanta, GA. “Having a centrally located base is a logical next step for us” said company president Colin Brown. “As our headquarters are in

New Zealand, we always knew it was important to be able to support our US based distributors with a good in-country presence. Opening this warehouse is another step down that pathway.”

The company’s remarkable growth has also extended to the software in

its systems. “While we have always had pilots comment on how easy our system is to use, we knew we could do better” said Mr Brown.

The new software will be on display

by TracMap at a number of the state conventions over the coming months.

“That way, pilots will be able to see for

themselves the reason why pilots say this new system really is superior to anything else available,” said Colin.

In addition to attending the larger state conventions, TracMap will be at both the NAAA and HAI shows.

Turbine Conversions Booth #204 & 206

www.midcont.net • 800-325-0885

Lighting Up the World...

...one Runway or Taxiway at a Time.

Solar LED Markers from BrightPortal

BrightPortal Resources, LLC Tim Cowsert tcowsert@sbcglobal.net 2003 Avenue G • Danbury, TX 77534 www.brightportalresources.com 979/270-1655

311

Booth

The Aviation Innovation Specialist For over 20 years Turbine Conversion, Ltd has been serving the agricultural aviation community with innovative technology that increases their customer’s profitability.

2011 was a year of growth for TCL. The acquisition of the entire Frakes Aviation agricultural STC package and the Duke Metering System from Jack Duke grew the TCL portfolio to over 20 STC products that make the ag operator’s job easier.

The first P&W Turbo Cat to fly in 20 years has taken off from Covington Aircraft in Oklahoma. The Turbo Cat offers Ag Cat pilots just what they need to get the job done.

The Duke Metering System has a 25year track record of increasing operator’s profit margins and maybe it’s just what your operation needs to increase versatility and profitability. Make sure to stop by the TCL booth #311 while in Vegas

and see a metering system in operation.

TCL now offers everything from high quality Pratt & Whitney or GE conversion packages, single point fueling systems, metering systems, cool start packages and firegates making TCL truly a one stop shop for innovative products in ag aviation.

Turbine Conversions, Ltd hopes to see you in Las Vegas, but if you are unable to attend make sure to visit turbineconversions.com or 616-837-9428 for more information on any of our products.

TCL is here to help you make your ag aircraft more profitable and has the experience to make it happen!

Turbine Conversions, Ltd is a family owned and operated company that has specialized in the manufacturing of PMA parts and FAA approved enhancements for aircraft since 1990.

For more information contact William Hatfield at 616-837-9428 or nancylhatfield@gmail.com

The Aviation Innovation Specialists P&W Turbo Cat

www.turbineconversions.com 616.837.9428 est

58 E

agairupdate.com

SEE YOU IN BOOTH #311

19th Annual NAAA Convention Show Guide

59 E

S. & T. Aircraft Accessories, Inc. "Full Engine Accessory Line" FAA Approved Repair Station No. CC2R737K

Large stock of overhauled/certified engine accessories for radial and turbine engines. Authorized distributor of Skytronics, Inc. Generators Magnetos Starters Fuel Pumps Alternators

Carburetors Tach Generators Hydraulic Pumps Voltage Regulators Voltage Controllers

Reverse Current Relays Aux. Boost Motors Vacuum Pumps Prop Governors Starter-Generators

Call Us Today For all yoUr aCCessory Needs OVERHAUL or EXCHANGE Booth 7 #100

310 FM 483 • New Braunfels, Texas 78130 Email: birds@compuvision.net Web: www.staircraftaccessories.com

Tel 830-625-7923 • Fax 830-625-4138

S & T Aircraft Accessories

1007 Booth

The accessory shop for you S & T Aircraft Accessories, Inc., an FAA approved repair station since 1983, continues to increase our inventory and overhaul capabilities. Our large inventory enables us to ship most items the same day on an exchange basis. If you prefer having your accessory overhauled, we make every attempt to provide a quick turn-around time.

We continue to overhaul and stock the following accessories for radial engines: starters, magnetos, fuel pumps, carburetors, tach generators, hydraulic pumps, generators, voltage regulators, reverse current relays, prop governors, auxiliary boost motors, alternators and voltage controllers.

We also overhaul and stock the following accessories for turbine engines: starter-

generators, reverse current relays, tach generators, fuel pumps, voltage regulators and auxiliary boost motors.

As an authorized distributor of Skytronics, Inc., we carry new Jasco alternators, voltage controllers and resistors for outright purchase and overhauled alternators and voltage controllers are available for exchange.

For your convenience, we accept Visa, Mastercard and Discover credit cards. To learn more about us, feel free to visit our website: www.staircraftaccessories.com.

As always, we look forward to seeing you at the NAAA Convention in Las Vegas, Nevada. Please stop by Booth #1007 and visit with us. We hope to see you there!

Turbine Aircraft Marketing TPE 331 Engines and Accessories 3 and 4 blade Hartzell Hubs Engine Instruments Inventory includes: -1, -5, -6 and -10 series engines

David Finley 972.248.3108 ext 213 214.649.2288 mobile dfinley@turbineair.com

Thelma Pence 972.248.3108 ext 305 214.649.2291 mobile tpence@turbineair.com

Dallas Office 4550 Jimmy Doolittle Drive Addison, Texas 75001 TEL: 972.248.3108 • FAX: 972.248.3321

60 E

agairupdate.com

TAM there for you TURBINE AIRCRAFT MARKETING, INC. (TAM)-Specializes in Honeywell TPE 331 engines, Hartzell props, engine instruments and gauges. TAM was established more than 14 years ago with David Finley heading up the Engine Group. David has over 40 years experience in general aviation engines.

Thelma Pence has over 28 years of experience in both commercial and general aviation engines. TAM maintains an inventory of engines, and other related engine requirements which are forever changing to accommodate the ag aviation industry demand. Whether you require an outright purchase, lease, or exchange on your TPE 331 engine requirement, we can accommodate your need. You may require something other than an engine, such as a Hartzell prop,

engine instrument or gauge. We are here to help. Time is valuable, so let us lend a hand to keep your engine costs down and you in the air.

As our engine inventory is constantly changing we make every effort to maintain an inventory of -1, -5, -6, and -10 Honeywell TPE 331 engines at all times. Additionally, we often carry the PT6 line of engines and inventory of PT6 spares as well.

TAM is just north of BIG D (Dallas) and accessible from every direction you may be located. Give us a call or drop us an email, we are here for you.

David Finley, 972.248.3108 ext 213, 214.649.2288 mobile, dfinley@turbineair. com or Thelma Pence, 972.248.3108 ext 305, 214.649.2291 mobile, tpence@ turbineair.com

107

Micronair

Unrivalled quality

Part of the Micron Group, Micronair manufactures a complete range of specialized low volume and ULV (Ultra Low Volume) aerial atomizers, flow monitors, turbines, booms and ancillary equipment for forestry, public health, migratory pest control, plantations and general agriculture.

As original pioneers of Controlled Droplet Application (CDA) using rotary cage atomizers, we offer unrivalled quality, durability and after sales service through a world wide network of experienced distributors.

Used by professional aerial operators in over 90 countries, the Micronair range of rotary atomizers offer operators high productivity at low application volumes and the flexibility to select spray droplet size accurately according to target, crop and environmental conditions.

The addition of the new Micronair AU5000LD atomiser assembly allows operators to significantly reduce spray drift at low volume rates of application and greatly extends the capabilities of the Micronair system.

Micronair users can now benefit from a dedicated users’ area on our newly revamped website with drop spectrum calculator, user guidelines on equipment set up and selection, downloadable instruction manuals and other technical articles and information. Check out our web site at www.micron.co.uk.

Our sales and technical personnel will be available to discuss individual operators requirements at this year’s NAAA convention, Booth number 107.

Manufactured by the pioneers of Controlled Droplet Application technology, Micronair is a comprehensive range of specialist rotary atomiser systems for ULV and Low Volume aerial spraying.

Public Health Forestry Migrant Pest Control Plantations General Agriculture For more information please call +44 (0)1885 482397 or email enquiries@micron.co.uk.

www.micron.co.uk

Spreading The Wings of Insurance Protection to Ag Aircraft Owners and Pilots

Competitive Pricing same Day Turntime

Exchange Available

We Overhaul

EAsA Approved

TPE331 & PT-6A FuEl NozzlEs

5005 Market Place Mt. Juliet, Tennessee 37122 (615) 758-5005 Fax (615) 758-5501 Se habla español CrS QTFr-573l envienos un Correo electronico www.tennairco.com erikagriffin@comcast.net

Aviation Insurance Coverage Customized for Ag Aircraft Owners and Operators

Falcon Insurance is one of the largest independently owned insurance specialists in the country. Our professional staff has decades of experience in aviation insurance, and we are uniquely qualified to provide insurance protection for agricultural aircraft owners and pilots.

We are dedicated to providing you with insurance coverage and service that sets the standard for the industry.

f FALCON I N S U R A N C E

Call for same day quotes and coverage or visit our website.

Austin: 800-370-0557 Dallas: 800-880-0801 Houston: 800-880-8822 Kerrville: 800-880-4545 Lakeland: 800-881-9688 Scottsdale: 800-880-3597 St. Louis: 800-880-8644

PO Box 291388, Kerrville, TX 78029

www.falconinsurance.com

19th Annual NAAA Convention Show Guide

61 E

Airforce Turbine Service ATS KNOWS THE AERIAL APPLICATION BUSINESS

NEED AN ENGINE?

NEED SERVICE?

ATS is a world leader in the purchase, sale, lease and loan of PT6A engines for Aerial Applicators.

ATS provides domestic and international MRO services for all segments of the PT6A turboprop market.

ATS maintains one of the largest replacement engine inventories in the industry and has the capability to quickly and fairly evaluate your core or mid-time engine for purchase quote or exchange credit.

As an independent repair and overhaul facility, ATS focuses on delivering quality and efficient service to its customers at one of the most competitive shop rates in the industry.

From ATS you can expect fair prices and the fastest turnarounds.

Where do you send your PT6A for service?

Airforce Turbine Service

www.PT6A.aero

Mathis, Texas

1-361-547-3386

FAA Approved Repair Station C.R.S. TQZR133K

62 E

agairupdate.com

Airforce Turbine Service

engine sales & leasing We maintain one of the largest replacement engine inventories in the industry and have the capability to quickly and fairly evaluate your core or mid-time PT6 engine for exchange credit or outright purchase. Additionally, ATS can offer domestic and international short to long term financing solutions to qualified companies and individuals. We guarantee that when dealing with ATS you are dealing direct.

parts & accessories Our PT6 parts inventory consists of OEM new, overhauled, serviceable and PMA alternatives. Additionally, we have established relationships with wholesale suppliers that allow us to competitively quote your procurement needs. Our shipping contracts allow for all types of domestic and international delivery including next day service.

ATS OVH tags are 100% guaranteed -- if you purchase an overhauled part from us and it fails a secondary inspection, we will refund the purchase price, including your cost for third party inspection.

maintenance repair & overhaul ATS provides domestic and international PT6 MRO services across all segments of the turboprop marketplace. As an independent repair and overhaul facility, our focus is on delivering quality and efficient service to our customers at one of the most competitive shop rates in the industry. Our existing customers know our level of dedication, which is why we have one of the highest repeat business ratios in the industry.

ag aviation ATS is an industry leader for the repair and overhaul of the PT6A engine for agricultural users across the country. Our company was originally founded in 1979 to specifically focus on the unique needs of the ag aviation industry. Our existing ag customers know our level of dedication, which is why we have one of the highest repeat business ratios in the industry.

19th Annual NAAA Convention Show Guide

63 E

CONTAINMENT/LOADING PAD

829

OctaFlex

Booth

-Portable/Permanent Containment Solutions -Aluminum and Fiberglass Construction -Standard or Custom Sizes -Visually Inspectable -We Assist with all Department of Ag Paperwork

605-865-3400-office 605-865-3481-plant www.octaflex.com richard@octaflex.com Over 32-years in aerial application & over 15-years in the containment business.

Virtually maintenance free, the OctaFlex Portable Containment/Loading Pad provides the most user-friendly available work area on the market and is customized to your specific aircraft size requirement. As mandated by the EPA, this unit is visually inspectable and is constructed of impervious material that will not become hazardous waste.

The washing or loading process uses a sub-bay to collect the waste water and offers protection for ground water from

accidental spills. This portable solution offers protection for any location and can be disassembled for seasonal storage.

The OctaFlex Portable Containment Pad can be easily covered to prevent unwanted rainwater accumulation.

OctaFlex Environmental Systems, Inc. strives to provide the industry’s most innovative, superior, and cost effective environmental products. Stop by booth #829 at this year’s NAAA convention for more information or just to say hello.

R.T. TuRbines, inc.

With over 40 years of experience.

Pratt & Whitney PT6A Engine Repair and Overhaul FAA Approved Overhaul Station MW9R610J

Complete Engine Overhaul and Repair Service Power Section Inspection Hot Section Inspection In-house Welding of Hot Zone Components

Phone

870-295-3552 64 E

agairupdate.com

R.T. TuRbines, inc.

FAA CRS # MW9R610J 3397 Hwy 121 West •Marianna, AR 72360 Rex Thompson, Jr. • Cell 501-412-3208

Fax

870-295-3554

Professional Fibreglass Repair

105

Rugged 502/602 retrofit door Professional Fibreglass Repair announces a new rugged construction 502/602 retrofit door to replace stock door. No fibreglass experience needed to install, just bolt into place. Stock size accommodates stock hardware or loading system. Larger

size available for manual operation.

For more information call Jon Herr at 530-735-6264 to discuss details. Stop by and see us at booth #105 in Las Vegas, Nevada.

FOR ALL YOUR SPRAYING NEEDS: WEATH-AERO FAN • HYDRAULIC ELECTRIC • VALVE FOR MORE INFO CONTACT: JIM GRAVES

Retrofit 502/602 Hopper Door now available for installation.

Shop: Fax:

530-735-6264 530-735-6265

Coming in Spring 2011: retorfit for the 301 & 401!

For customer service

800-544-5694

422 Monte Vista • Woodland, CA 95695

233 SAFETY ROAD • HOUMA , LA 70363

985-868-1477 AUTOCALFLOW@AOL.COM

www.jhpfr.com • e-mail: jon@jhpfr.com

www.skytractor.com • 800-437-5319 16285 5th St. NE, Hillsboro. ND 58045 • 701-636-5880 • fax 701-636-5881 • skytractor@rrv.net

Level 3 Service Center Intellistar - Intelliflow Bantam Litestar 2 Systems in stock!

We are very proud of our SERVICE AFTER THE SALE

We have a LARGE parts inventory.

If it’s for Ag Aircraft, give us a call!

We offer friendly, knowledgeable staff, and SAME DAY SHIPPING!

ANGEL

Personal Flight Assistant

SPH4 with communications Slide up Visor ANR and Cellsets

Online mapping –save $100

Associate Dealer Queen Bee Air

Sky Tractor Supply your COMPLETE ag aircraft dealer

Dedicated Application Software

19th Annual NAAA Convention Show Guide

65 E

Thrush Aircraft

111

Booth

PERFORMANCE What makes a Thrush the best ag aircraft ever built? Specifications and performance data are one thing. Real world quality and value are another.

At Thrush, we focus on both, and it’s reflected in literally everything we do, from cockpit design to flight characteristics. It’s a passion that’s been at Thrush for more than forty years, and it’s only getting stronger.

KNOWLEDGE Advanced training programs for the full line of Thrush Aircraft are provided by our highly qualified and experienced instructors. From a thorough pilot checkout with every new Thrush purchased to airframe and maintenance training, good ag pilots and mechanics are made thru training. Pilots are also provided with thorough walk around inspection and cockpit familiarization, including preflight procedures, all inspection areas, as well as location and operation of all engine and flight controls.

COMMITMENT As a commitment to our customers, Thrush Aircraft has enhanced its service and support to meet and exceed customer expectations. Thrush Aircraft and its authorized facilities are there to provide precise, reliable and prompt technical support. Thrush Aircraft has established new factory authorized facilities in the United States, Canada, Brasil, Ecuador and Australia. These facilities have parts inventory and will provide expert support and service to Thrush operators with the quality and dependability Thrush is known for worldwide.

66 E

agairupdate.com

We Wouldn’t BS a Group of Fertilizer Experts.

There are some amazing things happening at Thrush Aircraft, and that’s no bull.

Visit us online, or call Eric Rojek at 229.789.0437, to learn about the most talked about new aircraft in the industry.

Something new is going on here. www.thrushaircraft.com 19th Annual NAAA Convention Show Guide

67 E

517

CD Aviation Services

Booth

CD Aviation Services provides quality TPE331 engine service CD Aviation Services aims to provide the agricultural industry with the highest quality TPE331 engine maintenance, service and support.

Owners and operators that demand high performance, dependability and longevity need look no further than CD Aviation Services for unmatched economic value in today’s competitive market. We offer an unmatched Agricultural TPE331 limited warranty of 18 months or 600 hours.

Being an industry leader in customer service, CD Aviation Services has developed SilverSky. SilverSky provides the customer access to their information anywhere and anytime they want via the CD Aviation website. Upon login, SilverSky provides our customers with a full spectrum view of current and past maintenance events, real-time

progress status of all open work orders, comprehensive shop reports and all other relevant documentation.

As a testament of our dedication to quality, CD Aviation Services has earned the FAA Diamond Award of Excellence for the last four consecutive years.

In addition, CD Aviation Services has developed comprehensive 1-day and 5-day Engine Maintenance Training (EMT) courses which cover all aspects of the Honeywell TPE331 series engines. The courses focus on design, model variations, maintenance, troubleshooting and proper operation. They were designed to provide owner / operators, pilots and mechanics with the technical information needed to better understand and utilize their TPE331. Our 1-day and 5-day courses are FAA approved and our 1-day course is an FAA approved IA refresher.

CD Aviation Services offers industry setting standards in power, performance, cost and turn-time. Our AG Division Field Service and Support Team stands ready to serve 24/7/365. Put our 32 years of

experience to work and keep your aircraft operating at its maximum potential. Give us a call and let CD Aviation Services perform your next TPE331 engine maintenance event.

Engine Maintenance Training

• CAM Inspections

EMT program provides TPE331 training for pilots, mechanics & operators. Courses held onsite.

• Hot Section Inspections • Gearbox Inspections • LRU Replacements • Engine R & R

SilverSky is our customer support program which provides a full spectrum view of current and past maintenance events, real-time progress status of all open work orders and comprehensive shop reports and documentation.

• Rental & Exchange Units • Borescope Inspections • Field Services • Complete Test Cell Service • Pre-buy Inspections • 24 / 7 Support

68 E

agairupdate.com

Ag Technical & Field Support Toll Free: 866-975-2327 Phone: (417) 206-2327 Fax: (417) 206-2336 www.cdaviationservices.com

FAA AMT Diamond Award recipient 4 consecutive years

305 Booth

Davidon

006 1 # h oot

B

New boom bracket

Davidon, Inc. manufacturers of the Hi-Tek Rotary Nozzle and Tri-Set Nozzle for row crops, and the extremely popular mosquito nozzle, is very happy to announce the development of a new boom bracket and clean out ends.

We are pleased to inform our

customers that we will have our newest products on display at the NAAA convention in Las Vegas, NV this December.

Please come by Davidon’s booth 305 and visit with us and see the new boom clean out ends, nozzles and DRP-955.

Hi-Tek Rotor Nozzle

DaviDon, inc Makers of Quality Products

Manufacturers for Hi-Tek Nozzle, Tri-Set Nozzle and DRP-955 Drift Retardant and Penetrator.

5660 Calhoun Rd. Unadilla, GA 31091 Tel: 229-645-3605 • Fax: 229-645-3880

SafeGuards® PREVENT Ag Aviation Containment Berms Introducing our SafeGuards® PREVENT Ag Aviation Containment Berms! This product consists of (1)14’ x 22’ x 1’ PREVENT Easy Up berm, (2) 2’ x 22’ x 1’ PREVENT Easy Up berms, and a set of our ToughGuards top mats and ground mats. All berms are constructed of our premier heavy duty PolyChem 5 material (32 oz. Polyurethane coated nylon). Portable, Reusable. Sets up in minutes. Custom Sizes Available.

Original price $13,346.00, with this ad 10% off

GPS Systems for Aerial Applicators Only

Grow With Us dynanav.com

$12,011.40

P.O. Box 683186 • Marietta, GA 30068 Phone: 877-816-9716 www.4spillcontainment.com

DynaNav Systems Inc. Toll Free 1-877-333-9626 E-mail: airag@dynanav.com 19th Annual NAAA Convention Show Guide

69 E

NationAir Aviation Ins.

1017

It’s time to expect more from an aviation insurance broker.

A lot more. Many insurance buyers don’t realize just how much they could be getting from a broker—and how much they might be missing.

Agricultural aviation requires specialized insurance knowledge.

Fortunately, NationAir has provided affordable coverage in this area for over three decades, so we understand all of the details and issues related to the aerial applications business.

We provide you with superior customer care, expert advice and unique services such as contract review and dedicated claim advisors.

It’s time to discover better. And NationAir delivers. To learn more, contact a NationAir ag representative today.

• Liability Protection

• Property and Casualty

• Physical Damage Coverage

• Workers’ Compensation

• Fixed Wing or Rotorcraft

• Mosquito Abatement

Pete Torell

Alison Hunter

John Worthing

321-243-2143

269-547-9966

402-475-5860

www.NationAir.com

70 E

agairupdate.com

Booth

Meeting aerial applicators’ insurance needs NationAir’s experience, history and underwriter relationships make it one of the dominant insurance brokers in the agricultural aviation marketplace.

NationAir is a top ten broker with all aviation insurers, and a top five broker with many significant underwriters. The sheer volume of business that NationAir places, along with its knowledge and reputation for integrity, gives it a level of influence that benefits all of its clients.

Aerial applications represents a significant part of NationAir’s core business. Its professionals have been committed to representing aerial applicators for more than three decades.

NationAir’s team knows how challenging and complex this industry can be, and understands what the ag community needs from a broker. NationAir’s influence and experience enable you to get the most competitive rates in the industry, and also gives them early access to key developments from the markets.

In its 34th year of operation, NationAir Aviation Insurance is one of the largest and oldest specialty aviation brokerages in the United States, with representatives in nine locations across the country and three agricultural specialists. While NationAir represents all types of aircraft owners and operators, from homebuilts to regional airlines, agricultural aviation has been one of its specialties since its inception.

NationAir boasts the most knowledgeable, committed service team in the industry, too. NationAir knows it takes more than just one person to handle your insurance needs. Its team approach means there are many people working behind the scenes to assure a rapid response for time-critical issues such as certificate requests. A strong infrastructure, with a highly trained, experienced service team, gives brokers

the time to do their jobs while increasing the level of attention you receive. And there’s always a friendly voice at the other end of the phone instead of an endless chain of voice mail options.

What’s more, NationAir offers additional services as part of your basic insurance package. The company’s inhouse claims advisors serve as advocates on your behalf, dealing with underwriters and making sure the claims process goes smoothly. A contract specialist, Gary Stewart of Ascot Consulting, reviews your contracts to make sure your interests are fairly represented. NationAir clients receive these services at no additional charge.

Throughout the year, NationAir meets regularly with clients and associates in the aerial applications industry, attending all major national and state association events. To better share its agricultural knowledge, NationAir publishes Fly Low, Fly Safe, keeping you updated on key industry issues and creating a forum for your questions and concerns. The newsletter, published several times a year, includes articles from industry experts, NationAir brokers, underwriters and claims representatives. To read past issues, visit http://nationair.com/ commercial/agaviation.php The agricultural aerial application business is very competitive. You probably get regular requests from brokers to handle your insurance. But only NationAir provides the right combination of experience, knowledge and outstanding customer service. NationAir will help you find the right coverage at the best rates possible, and review your coverage periodically so it keeps up with your everchanging agribusiness environment.

Discover better. Discover NationAir. For more information, visit www.nationair.com

Tulsa Aircraft Engines

610 Booth

Building the best radial engine possible Update on our cylinder reconditioning program for R-985 and R-1340 Engines.

by Rex Vaughan Tulsa Aircraft Engines Inc. Years ago, our customers were having multiple cylinder failures on different model aircraft and engines. Tulsa Aircraft Engines recognized it was not always the pilots causing these failures, so we decided to investigate the problem further and found a resolution that would help the industry.

Tulsa put together a program to recondition the heads and make new barrels for both the the R-985 and the R-1340 engine. Our intention was to try to prevent head to barrel separation on the R-985 engines (where we made about

a 98% improvement) and cylinder skirt failures on the R-1340 engines (where we made a 100% improvement). With over 200 R-985 engines having undergone our process, there have only been 15 cylinders fail. The R-1340 engine has had a 100% improvement on the cylinder skirt failures (no failures).

There are no new cylinders in production at this time, prompting Tulsa Aircraft Engines to improve on all of their overhauls - putting out the best engine possible.

Tulsa Aircraft Engines now has another approval for coatings on the pistons to help prevent scuffing on the sides and for a heat barrier. This enhances performance in the engine and will aid in prevention of piston failures.

WireNoodle.com Help local tower owners comply with the new federal regulations regarding tower visibility, liability by sharing this information with them. Easy installation.

Pass this information onto other’s that can use the product. We appreciate any feedback.

For more information call 631-4730187

What’s WireNoodle?

• WireNoodle provides enhanced wire visibility to assist pilots.

• WireNoodle increases the speed of chemical distribution due to increased safety measures for crop dusters.

• WireNoodle is 59” long by 3” diameter (Inside Diameter 1 +”)

Contact Us Today!

Email: info@wirenoodle.com Phone: 631-473-0187

Specializing in Repair and Overhaul of Pratt & Whitney R-985-1340 Engines since 1973

9311 East 44th St. North Tulsa, Oklahoma 74115

918-838-8532 Fax: 918-838-1659 tae@tulsacoxmail.com Se Habla Español

FAA APPROVED REPAIR STATION NO. CT2R754K

19th Annual NAAA Convention Show Guide

71 E

Trace Engines

Exceptional performance offered by Trace Engines TRACE Engines in Midland, Texas, is building firewall forward kits to convert Air Tractor agricultural aircraft to TRACE V-8 power. The firewall forward kit comes complete with a 106” McCauley Prop, engine mount, new aerodynamic cowlings, and all engine sub systems. All engine instrumentation is included. Engines and

firewall forward kits include a full TRACE factory backed warranty.

TRACE not only builds the engines and kits in Midland but also installs them in their hangar at the Midland airport (MAF). Painting and other aircraft support services are also offered.

TRACE offers exceptional performance,

1003 Booth

with our aerospace, purpose built V-8 engine. The TRACE Advantage is all the performance with less hourly operating costs in fuel consumption and overhaul costs. Our 600 horsepower engines can be installed in Air Tractor 301, 302, 401, and 402 aircraft today. TRACE recommends a fresh annual inspection prior to conversion to limit work performed to kit installation.

Maintenance costs are a fraction of turbine costs. The TRACE engine is simple to maintain. TRACE overhaul costs are typically less than most 1340 radials, fixed at $40,000 maximum.

Engines and firewall forward kits are available for conversions for the coming season. Buy now and save thousands.

Get the turbine performance you want for increased productivity without the high fuel and overhaul costs. This makes sense

in the short and long term.

Many new current developments are underway including electronic fuel injection and ignition and an STC for operation on 91 unleaded “mogas.”

TRACE is currently converting an Air Tractor 301 and is interested in Thrush aircraft as well for next year. Call and talk to us about the applicability for your ag aircraft.

Fly in, have your Air Tractor converted and be ready for the upcoming season.

TRACE understands the typically short duration of the spray season and the need to be flying when the work is there.

Call Business Development Manager Andy Biery at 432-618-0942 to schedule a factory tour and demonstration flight of one of our conversions.

Look for us at the annual NAAA Convention in Las Vegas, Nev., booths 1003 and 1005. Demonstration flights will be available at Henderson Executive Airport (HND) during the convention.

Call 432-618-7223 to schedule a flight.

Advance notice for insurance coverage may be required.

us at Visit booth 005 at /1 1003 !

NAAA

Experience high performing aviation with the turbocharged TRACE V-8 engine!

Our 600 horsepower engines are ready to be installed in your Air Tractor 301, 302, 401, or 402 aircraft.

Demo flights available at Henderson Executive Airport (HND) during the NAAA convention. Call (432) 618-7223 to schedule a flight.

Schedule a factory tour to view a conversion in process by calling (432) 618-7223.

TRACE Engines L.P.  3000 W. Interstate 20  Midland, TX 79701 (432) 618-7223  www.traceengines.com  (432) 618-8745 (FAX) Find us on Facebook!

72 E

agairupdate.com

1009 Booth

Andy Montague brings training program to Central Florida Ag Aero Andy Montague was the first to recognize the need for high-quality, simulator-based training for turbinepowered aircraft. He pioneered the development of the highly successful program that has been used to train

CFAA

hundreds of pilots from countries all over the world.

Andy co-founded Central Florida Ag Aero in Orlando, Florida, USA. The company is devoted exclusively to agriculture, fire fighting and special operations. The program is well known and accepted as the standard for training throughout the industry.

Booth #204 & 206

www.midcont.net • 800-325-0885

CFAA Simulator Based Turbine Ag Training Initial and Recurrent Your Turbine Transition Solution

Professional Training for Professional Pilots Turbine Transition • Drift Control • GPS Equipped • Ag Ops Safety Insurance Approved • Save Time and Money

CFAA Central Florida Ag Aero, LLC www.CentralFloridaAgAero.com

866-673-8607 • 407-482-2266 • contact@centralfloridaaero.com

19th Annual NAAA Convention Show Guide

73 E

Covington Aircraft Engines

623 Booth

The Covington Light Overhaul: about half the price of a regular overhaul It’s time to work, your schedule’s tight, and the last thing you want is downtime.

As an ag pilot, you know timing is critical during the growing season, and your plane needs to be completely reliable.

So you do a thorough pre-flight, but one problem sits at the back of your mind: your engine is way past TBO. At Covington, we know overhauls are necessary, but they can also be expensive. While we always recommend getting your engine overhauled at the suggested TBO, we also know that’s not always an option. So we’ve developed an alternative:‑ The COVINGTON LIGHT OVERHAUL. The Covington Light Overhaul is a repair alternative to a

74 E

agairupdate.com

typical overhaul that focuses on the most crucial parts of a PT6A engine and can add up to 2500 more hours beyond TBO. Keeping with Covington’s tradition of providing the best maintenance at the best price, the Covington Light Overhaul costs about half as much as a regular overhaul.

The Covington Light Overhaul not only extends your engine hours, it also increases the overall value of your engine. With Covington’s Light Overhaul, you get documented and certified engine maintenance records for your logbooks. Covington Aircraft’s Turbine Division defines and documents all services and repairs administered

during the Light Overhaul, which increases the resale value of your engine.

One of the first differences you may notice between the Covington Light Overhaul and the traditional overhaul is the price. The Covington Light Overhaul is about half the cost of a full overhaul.

We are able to offer our services at this price because the Covington Light Overhaul has a clearly defined work scope that focuses on the most crucial areas of the engine first.

Rest assured that Covington will never perform services that significantly alter the initial estimate without your approval. It is our priority to keep you informed of our services and the final

price. You will be provided a complete inspection report prior to any further work, and you will have a chance to review or question the reason for replacement of any parts prior to the work being performed.

Covington Aircraft is committed to integrity, dependability, affordability and quality service. Contact us today and we can discuss if the Covington Light Overhaul is right for you: 918-756-8320 or visit us on the web covingtonaircraft. com

Convention

Floorplan

advertisers’ booth numbers

Company Booth # Page A.E.R.O. (APS)............................................... 905......................27 Acorn Welding................................................ 631......................25 Aero Engines, Inc........................................... 528......................36 AeroFlow, Inc ................................................ 928......................21 AgAir Update.................................................. 713........................4 Ag - Nav, Inc. ................................................ 110......................35 Ag Air Turbines, Inc........................................ 518......................17 AgriData Inc................................................... 706......................53 Agrinautics..................................................... 302......................33 AgriSmart Information Systems LLC.............. 400......................24 AgSync........................................................... 923............... 57, 73 Air Repair, Inc................................................. 509.................Insert Air South Insurance....................................................................26 Air Tech Coatings Inc. ................................................................23 Air Tractor Inc................................................ 807......................42 Aircraft Accessories of Oklahoma, Inc........... 515........................9 Airforce Turbine Service.............................................................62 Airplane Services Inc..................................................................25 Apollo Spray Systems / Airwolf Filter............. 431............... 15, 27 Arctic Air Cooler..........................................................................20 Auger Dan, LLC............................................. 430......................18 Auto-Cal, Inc.................................................. 103......................65 BASF.............................................................. 223......................49 BrightPortal Resources, LLC........................1002......................58 Cascade Aircraft Conversions LLC................. 417......................32 CD Aviation Services...................................... 517......................68 Central Florida Ag Aero LLC.........................1009......................73 Chester Roberts Supply Company..............................................21 Compton’s Flying Service............................... 611........................9 Covington Aircraft Engines............................ 623......................76

CP Products Co., Inc...................................... 511......................37 Curtis Dyna-Fog Ltd..................................... 1000......................33 Davidon.......................................................... 305......................69 Dyna Nav Systems, Inc. .............................. 1006............... 28, 69 Eagle Vistas LLC.........................................................................29 Electronics International, Inc. ....................................................10 Falcon Insurance Agency, Inc. ...................... 608......................61 Farm Air. Inc................................................... 822......................45 Flight Grip, LLC............................................... 325......................18 Flying Tiger Aviation....................................................................18 Garrco Products, Inc...................................... 703......................13 GE Aviation .................................................... 317......................29 Hardy Aviation Ins Inc. .................................. 502......................23 Hemisphere GPS............................................ 717......................41 Isolair, Inc....................................................... 408......................11 J & C Enterprises, Inc................................... 1122......................22 Johnston Aircraft Service, Inc........................ 415......................12 Kimmel Aviation Insurance..........................................................25 Kugler Co....................................................... 203......................47 Lane Aviation Inc.......................................... 907........................7 Machida Borescopes..................................... 900......................15 Micron Sprayers Limited................................ 107......................61 Mid - Continent.............................................. 204.. 21, 22, 58, 73 Millennium Enterprises, Inc........................................................69 NAAA............................................................................................. 2 NationAir Aviation Insurance ......................1017......................70 North Star Aviation, inc..............................................................51 OctaFlex......................................................... 829......................64 PARMA........................................................... 804......................50 Pratt & Whitney Canada ................................ 523......................55 Preferred Airparts......................................................................15

Prime Turbines ............................................ 303......................11 Professional Fibreglass Repair...................... 105......................65 Professional Insurance Mgmt........................ 603........................9 Queen Bee Air Specialties........................... 1011......................27 R. T. Turbines, Inc.......................................... 808......................64 Rocky Mountain Propellers............................ 728......................17 S & T Aircraft Accessories, Inc.....................1007......................60 Sanag..........................................................................................73 Simplex Manufacturing................................... 630......................20 Skeet-R-Gone................................................. 104......................29 Sky Tractor Supply Co.................................... 123......................65 Southeastern Aircraft Sales.........................1015......................52 Souther Field Aviation, Inc............................. 106......................19 Southwest Airmotive Corp...........................................................28 Spectrum Electrostatic Sprayers, Inc............ 301......................19 Sun Air Parts..............................................................................19 Tennessee Aircraft Co Inc.............................. 802......................61 Thrush Aircraft Inc......................................... 111......................67 TRACE Engines LP....................................... 1003......................72 TracMap NZ LTD............................................ 408......................59 Transland ...................................................... 707........................5 Tulsa Aircraft Engines.................................... 610......................71 Turbine Aircraft Services, Inc. ....................................................60 Turbine Conversions LTD............................... 311......................58 Turbine Installations LLC................................ 428......................22 Turbines, Inc.................................................. 423......................30 Universal Turbine Parts .............................................................46 USAg Recycling, Inc....................................................................51 Valley Air Crafts.............................................. 902......................16 WireNoodle.com..........................................................................71 Zee Systems Inc..........................................................................16

Pratt & Whitney Canada Distributor and Designated Overhaul Facility (DDOF)

Restored reliability and new PT6A engine performance at half the cost of overhaul!

www.covingtonaircraft.com Ph. (918) 756-8320

Se Habla Espanol • FAA Repair Station No. CP2R750K 76 E

agairupdate.com