BRAKE PAD THICKNESS GUAGE
• Colour coded blades to fit between disc and brake pad
• Dual marked in metric and imperial
• Ideal for quickly checking material thickness of brake pad
MASTER BRAKE PISTON WIND BACK TOOL
• Comprehensive master set of adaptors to suit a wide range of vehicle applications.
ON-VEHICLE BRAKE PIPE FLARING TOOL
• Compact design
• Includes dies and punches for brake pipe sizes: 4.75mm and 3/16″ diameter
BRAKE PISTON WIND BACK TOOL
COIL SPRING CLAMPS STANDARD
• Drop forged CR-V steel jaws and leaded screws (270mm) both heat treated ensure you obtain professional job performance.
• This tool kit is used to rotate and press the piston back into the brake caliper at the same time, preventing damage to the gaskets.
BRAKE PISTON WIND BACK TOOL AIR OPE
• The tool is designed for use in limited space under wheel arch.
• Jaw design is fitting to warp coil claws for safely.
COIL SPRING CLAMPS LONG REACH
• Set of 2 spring pressure regulator compressors.
• Perfect for limited space
COIL SPRING COMPRESS STAND - 1500KG
• 1500kg Hydraulic foot operated pedal. Safer and easier than using a ratchet driven spring compressor. Suitable for springs from 80mm to 175mm.
COIL SPRING COMPRESSOR MACHPERSON
• Drop forged ChromeVanadium steel. •
•
• Removable 2-step flexible spout.
• Suitable for all engine oils, transmission fluids, brake fluids
• Set of 3
• Purposemade for the recovery of oil and antifreeze
• Set comprises 75mm, 150mm and 250mm funnels with hanging tabs
CONTAINER FUNNEL FLEXI SPOUT MEDIUM SIZE
CONTAINER FLEXI SPOUT
• Set of 4
• Set comprises 75mm, 95mm, 114mm and 139mm funnels with hanging tabs
•
• Fluid Compatibility: AdBlue®, Antifreeze, Diesel, Oil, Water.
• 3-Way fill with cartridge, bulk or manual capability.
• Supplied with rigid delivery tube hydraulic 4-jaw coupling.
• Fits standard 400g cartridges.
OXYGEN SENSOR THREAD CHASET
OIL DRAIN THREAD REPAIR KIT
• Suitable for Titania and Zirconia oxygen sensors found on almost all modern vehicles.
• Comes with 2 x thread chasers for cleaning and repairing damaged threads.
- 500KG
• Designed to Fit Safety Chains
• Dual Piston Pump
• Lifting Pedal
• Superb for repairing sump, gearbox and differential drain plug threads
• Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer supplied
• Set is suitable for the most popular threads used on cars and light commercial vehicles.
• Tap Sizes: M13, M15, M17, M20.
OIL PAN THREAD REPAIR M15
• Oil Drain Plugs may need to be replaced because of stripped threads
• Suitable for Cars / Motorbikes / Trucks and Vans
• Deal for supporting the suspension strut
• Prevents the suspension strut from lowering when working on the axle
• Locking bracket for holding the strut securely
• Suitable for transmission jacks with mounting diameter of 30 mm
• Applicable to NCCJ500 and CTRNSJ500K
1,000+
TOOLS DESIGNED TO CRUSH THE WEEK
100+
SETS IN EVA FOAM FOR ELITE PROTECTION
20+ PRODUCT CATEGORIES
RATCHETING SCREWDRIVER SET
• Self-contained storage in handle
PHILLIPS SLOTTED SCREWDRIVER SET
• 1/4 inch holder allows for most bits to be used
• Moulded grip designed for comfort and performance
• 72-tooth ratcheting driver provides smooth operation
INSULATED SCREWDRIVER SET
• PH#0 X 2-3/8in, PH#1 X 3-1/8in, PH#2 X 4in, PH#3 X 6in, 5/32in X 4in, 7/32in X 5in, 1/4in X 6in
EXTRA LONG SCREWDRIVER SET PH2
PRECISION TORX DRIVER SET
• T5, T6, T7, T8, T9, T10 • 1/4in X 4in, 1/4in X 6in, 5/16in X
TORX DRIVER SET T5-40
Carlyle’s built-in automatic charger can provide up to 24 hour/365 day continuous charging. Its quick connect voltage selection system makes it easy to change from 12V to 24V operation and back again.
• 3-speed settings with variable speed trigger best suited for numerous applications
• Versatile outdoor power equipment system, powered by a single power head
• Delivers the capability to swap between multiple attachments to complete a wide range of
• Over 60 cm cutting length with double sharpened & dual actuating blades for clean cuts and removal of thicker material
• 32 mm blade gap with the power to cut up to 25 mm hardwood branches
• 5-position rotating handle provides increased control in different blade orientations
• Extremely compact design with only 137 mm in length, perfect for use in tight spaces
• 40 Nm of torque provides best power to size ratio
• 10 mm heavy duty chuck for quick bit changes and best bit retention
• Supplied with two 2.0Ah M12 batteries, M12 charger, and kit box.
• Up to 14.2 m³/min of air volume at 193 km/h to
• Consistent blowing force of 12.2 N throughout the entire battery discharge
• Reaches full throttle in under 1 second
M12™ HEATED HOODIE
• M12 Heated Hoodie powered by an M12 battery with carbon fibre heating elements creates and distributes heat to chest and back.
• Superior run time, up to 11 hours of heat on a single battery charge of anM12 12V REDLITHIUM 3 Ah Battery pack.
HEATED PUFFER VEST
• M12 Heated Jacket powered by an M12 Battery with carbon fibre heating elements creates and distributes heat to chest, back and shoulders.
• Lightweight and highly durable ripstop polyester provides a slim design that can be worn as an outer-shell or a mid-layer 100 % Polyester outer and inner shell.
• Suitable For 1.5, 2.0, 3.0 and 4.0Ah
• M12 Heated Jacket powered by an M12 Battery with carbon fibre heating elements creates and distributes heat to chest, back and shoulders.
• Lightweight and highly durable ripstop polyester provides a slim design that can be worn as an outershell or a mid-layer 100 % Polyester outer and inner shell.
HEATED PUFFER JACKET BASEBALL CAP
BT300P BATTERY TESTER WITH BUILT IN PRINTER
• Built-In Printer to Generate Reports and Provide Results Instantly
• Results are 99.5% accurate
• Smoke-Free and Spark-Free Premium Copper Clamps
• 2.4” Color Screen
• CCA: 100-2000
• Battery Type: Flooded/AGM/GEL/EFB
• Battery Standard: CCA/CA/BCI/ MCA/DIN/IEC/EN/SAE/JIS/GB
ARTIDIAG PRO (2YR FREE SUBS)
• 31 maintenance services for major vehicle models
• Actuation testing (Bi-directional control)
• Support ECU coding for modification
• Full-system diagnostics for engine, transmission, airbag, etc.
• Basic full-system diagnostic functions: ECU lookups, read &clear fault codes, etc.
• AutoVIN for automatic vehicle identification
• Automatic generation of diagnostic reports for printing orsharing via email
• 2 Years free upgrade
• Multilingual Support
TOPSCAN PRO SMART DIAGNOSTIC TOOL (1YR FREE SUBS)
• Full System Diagnosis for 70+ Brands
• DTC Repair Guide
• 10 modes of OBD2 testing free for life
• Bi-Directional Control
• Multi-Dimensional Data Display
• AutoVIN & AutoScan
• Bluetooth: 5.0 (connection range: 33 feet/10m)
