NAPA Additives Brochure

Page 1


DPF CLEANER 400ML

NAPA DPF Cleaner is an effective way to weaken and remove carbon and ash deposits in diesel particulate filter (DPF) systems, without disassembly. When the DPF system works properly, it burns particles and hydrocarbons, inevitably causing ash to build up, and a DPF cleaning agent serves to remove ash and ensure optimum performance. Suitable for diesel particle filter systems.

Application: Disassemble the temperature or pressure sensor from the filter. Insert the special tube into the opening and empty the can in the following intervals. Spray 3 to 5 times and allow to soak for 5 seconds. Install the temperature or pressure sensor. Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid. Make a test drive of 30 minutes. This may cause the formation to steam.

DIESEL SYSTEM PROTECTOR 300ML

NAPA Diesel System Protector is highly effective at protecting all components which have contact with fuel, preventing corrosion, sludge formation, and high fuel consumption. Suitable for cars and trucks with diesel engines. For both common-rail and pump injection systems.

Application: Add the contents to 50 litres of diesel.

DPF CLEANER & REGENERATOR 300ML

NAPA DPF Cleaner and Regenerator is a special additive package that enables the burn off of soot in the DPF, to optimise its performance. Suitable for all diesel engines equipped with OEM or aftermarket diesel particulate filter (DPF). Not suitable for vehicles equipped with an OEM additive system.

Application: Add the contents to the diesel tank. No specialist tools or equipment required.

DIESEL SYSTEM CLEANER 300ML

NAPA Diesel System Cleaner is a highperformance cleaning additive that cleans the fuel injection system, restoring engine performance and fuel economy. Suitable for all diesel engines in passenger cars.

Application: Add the contents to 30 litres of diesel and test drive the vehicle.

PETROL SYSTEM PROTECTOR 300ML

NAPA Petrol System Protector protects all components that have contact with fuel, preventing corrosion, sludge formation, and high fuel consumption. Suitable for all petrol engines in passenger cars, with or without catalytic exhaust gas converts.

Application: Add the contents to the fuel tank. Suitable for up to 60 litres of petrol.

PETROL SYSTEM CLEANER 300ML

NAPA Petrol System Cleaner effectively cleans the fuel injection system, restoring engine performance and fuel economy. Suitable for all petrol engines in passenger cars, with or without catalytic gas converters.

Application: Add the contents to the fuel tank.

NAPA Engine Oil Stop Leak instantly reduces oil loss by conditioning the engine seals.

Suitable for all petrol and diesel engines, and all commonly used motor oils and engine seals.

Application: Add the contents to the engine oil and let the engine idle for 10 minutes to ensure adequate mixing.

NAPA Engine Oil System Cleaner is a highly effective cleaner that removes sludge and corrosion and prevents future early contaminations.

Suitable for all petrol and diesel engines with all commonly used engine oils.

Application: Add the contents to the engine oil at operating temperature. Let engine idle for at least 10 minutes. Afterwards change oil and filter.

ENGINE OIL TREATMENT 300ML

NAPA Engine Oil Treatment is a comprehensive special additive package that improves the performance of existing engine oil. The engine oil treatment increases the viscosity index, making the engine oil more viscous (thicker) at higher temperatures. Suitable for all petrol and diesel engines. Especially for engines with a higher level of engine wear.

Application: Add the contents to engine oil.

EGR CLEANER 500ML

COOLING SYSTEM STOP LEAK 300ML

NAPA Cooling System Stop Leak is a highly effective sealant for cooling systems, instantly reducing coolant loss by sealing radiator cracks. Suitable for all cooling systems of petrol and diesel engines. Fully compatible with all types of antifreeze and coolants. No harmful effect on rubber, plastics, alloys, and non-ferrous metals.

Application: Add the contents to the cooling system and reapply the radiator cap. Leave engine running at idling speed for 10 minutes or take a test drive.

NAPA EGR Cleaner is a high quality exhaust gas recirculation (EGR) cleaner, to dissolve deposits in the air intake valve, air intake system, manifold, and inlet valves. By restoring the air flow to the engine, the power and acceleration is improved and exhaust smoke is reduced. Suitable for diesel and petrol vehicles.

Application: Loosen the hose between the turbo and air intake system. Start the engine and allow to run at approx. 2000 rpm. Spray contents directly into the inlet of the manifold by repeatedly, briefly pressing the nozzle till the engine runs more smoothly. Install the hose.

COOLING SYSTEM CLEANER 250ML

NAPA Cooling System Cleaner is a quick and effective cleaning solution for vehicle radiators and heating systems. Removes sludge and corrosion, and prevents future early contamination of the cooling system. Suitable for all cooling systems of petrol and diesel engines.

Application: Add the contents to the radiator and leave the engine running at operating temperature for around 30 minutes.

THE COMPLETE SOLUTION

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.