Vendig Product catalouge ENG

Page 1

#11

productcatalogue


register Adapter Flexus 9777 Arcus secondary scraper 9800 Belt brush Belt guide rollers 3302 Bracket 8891 Diagonal plough 8400 Diskus belt support 3463-3499 Flexus 2 9750 Food pre-scraper 8600 Hampus Heavy pre-scraper 9130 Hampus HM scraper board 9330 Hampus pre-scraper 9100 Hampus pre-scraper 9100-PU Hampus scraper board 9300 Hampus secondary scraper 9200 HM scraper board 8150 Holder H complete 8380/8380-HD Holder PL 9380 Holder SE Maxi plough 8800 Maxi plough foldable 8800-VF Maximus pre-scraper 8900 Mini-Rasmus pre-scraper 8000 Miniscraper pre-scraper 8700

42 32 49 46 42 58 47 38 24 10 40 6 8 34 28 37 26 43 41 50 52 16 20 22

OJ:s belt weigher system Pipe 8890 Plough heavy duty foldable 2800 Pontus secondary scraper 9500 Prime Tracker PU plough 8500 PU scraper board 8100 PU striking roller 3500 PU wedge 6750 Pulley scraper 8200 Rasmus pre-scraper 8300 Return idler Safe guard 3600 Self extinguishing skirting TPU/PVC Sirius pre-scraper 9900 Sirius HM pre-scraper 9930 Skirting 6450 Skirting strip PVC Skirting strip TPU Spring lever arm complete 9178 Square tube 8127 TPU/PVC skirting strip TST-F heat resistant pre-scraper Universal holder bracket 9390

Allowing for misprint and for product changes after printing. Layout: Westberg & Höök Design AB, whdesign.se Printed 2020 2

66 42 52 30 44 54 36 48 63 56 18 64 60 12 14 62 61 60 26 42 59 25 27


content pre-scrapers

Food pre-scraper 8600 Hampus Heavy pre-scraper 9130 Hampus pre-scraper 9100 Hampus pre-scraper 9100-PU Holder H complete 8380/8380-HD Maximus pre-scraper 8900 Mini-Rasmus pre-scraper 8000 Miniscraper pre-scraper 8700 Rasmus pre-scraper 8300 Sirius pre-scraper 9900 Sirius HM pre-scraper 9930 Spring lever arm complete 9178 TST-F heat resistant pre-scraper Universal holder bracket 9390

secondary scrapers

Arcus secondary scraper 9800 Hampus secondary scraper 9200 Pontus secondary scraper 9500

scraper boards

Adapter Flexus 9777 Flexus 2 9750 Hampus HM scraper board 9330 Hampus scraper board 9300 HM scraper board 8150 Holder SE Holder PL 9380 PU scraper board 8100 Square tube 8127

24 10 6 8 26 16 20 22 18 12 14 26 25 27 32 28 30 42 38 40 34 37 41 43 36 42

belt guidance

Belt guide rollers 3302 Diskus belt support 3463-3499 Prime Tracker PU-Belt guide roller 3302

ploughs

Bracket 8891 Diagonal plough 8400 Maxi plough 8800 Maxi plough foldable 8800-VF Pipe 8890 Plough heavy duty foldable 2800 PU plough 8500 Pulley scraper 8200

other

Belt brush PU striking roller 3500 PU wedge 6750 TPU/PVC skirting strip Self extinguishing skirting TPU/PVC Skirting strip TPU Skirting strip PVC Skirting 6450

safety

Return idler Safe guard 3600

belt weigher system OJ:s belt weigher system

46 47 44 46 42 58 50 52 42 52 54 56 49 48 63 59 60 60 61 62 64 66

3


scraper blade guide

hampus-pu

9100PU

175

hampus heavy

9130

175/140

Sweden

Förskrapor Förskrapor Bladprofiler

maximus

8900

Sweden

Förskrapor Förskrapor Bladprofiler Bladprofiler

rasmus

Bladprofiler

miniscraper

8000 TST TST TST

Sweden Förskrapor

TST

8600

Bladprofiler Bladprofiler Bladprofiler

Bladprofiler förskrapor Ritningsförskrapor nr./Drawing no. Bladprofiler Bladprofiler Kontr. av/Check by av/Drawn by förskrapor www.vendig.se Ritad

Sweden

info@vendig.se

Bladprofiler 

Bladprofiler

Rev.

Skala/Scale

/1

Rev.

1:4 1 /1

Rev.

Ritnings nr./Drawing no.

Bladprofiler förskrapor

Rev.

✔ ✔

2,3 m/s

100250

✔ 2,3 m/s

80

100200

✔ 1,6 m/s

80

100200

✔ 1,6 m/s

1:4 1 /1 Rev.

scraper blade material options explained std

Standard polyurethane

as

Anti-static polyurethane

cr

Chemical resistent polyurethane

food Food approved polyurethane 4

2,3 m/s

87

155

Godk. av/Appr. by Sida/Sheet

Bladprofiler förskrapor

Godk. av/Appr. by Sida/Sheet

1 /1

✔ ✔ ✔ ✔

Ritad av/Drawn by Kontr. av/Check by Skala/Scale

Ritnings nr./Drawing no.

1 /1

Rev.

1 /1

1:4

✔ ✔ ✔ ✔

✔ 2,3 m/s

förskrapor Rev.

1:4

Sida/Sheet

1:4

Rev.

Jenny

220400

1 /1

Rev.

Skala/Scale

Bladprofiler förskrapor av/Check by Skala/Scale Ritad av/Drawn by Kontr. Datum/Date

od s a

fo

Ritnings nr./Drawing no. Bladprofiler

Jenny

Rev.1

l

o to ge

4001000

270

Godk. av/Appr. by Sida/Sheet Ritnings nr./Drawing no.

Datum/Date

220630

Godk. av/Appr. by Sida/Sheet

förskrapor

Godk. av/Appr. by Sida/Sheet

Ritnings nr./Drawing no.

www.vendig.se info@vendig.se

Förskrapor

Jenny

Datum/Date

Förskrapor Sweden

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

8700

TST

av/Drawn by Kontr. av/Check by Skala/Scale www.vendig.se Ritad av/Drawn by Kontr. av/Check by Skala/Scale www.vendig.se Ritad Jenny 1:4 Sweden info@vendig.se Jenny Ritad av/Drawn by Kontr. av/Check www.vendig.se 1 by : 4 Skala/Scale Sweden info@vendig.se Datum/Date Godk. av/Appr. by Sida/Sheet 1 : 4 Jenny Godk. info@vendig.se Datum/Date av/Appr. by Sida/Sheet 1 /1 Datum/Date Godk. av/Appr.1by /1 Sida/Sheet Ritnings nr./Drawing no. Rev. 1 /1 Ritnings nr./Drawing no. Rev.

Förskrapor Förskrapor food-scraper

1 /1 Godk. av/Appr. by Sida/Sheet

Ritnings nr./Drawing no.

Bladprofiler förskrapor

Vi förbehåller oss rätten till konstruktionsändringar We reserve the right to design changes Vi förbehåller oss rätten till konstruktionsändringar We reserve the right to design changes Vi förbehåller oss rätten till konstruktionsändringar We reserve the right to design changes Vi förbehåller oss rätten till konstruktionsändringar We reserve the right to design changes Vi förbehåller oss rätten till konstruktionsändringar We reserve the right to design changes

mini-rasmus

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

www.vendig.se info@vendig.se

8300

Sweden

Godk. av/Appr. by Sida/Sheet 1:4

Bladprofiler förskrapor Ritnings nr./Drawing no.

Bladprofiler förskrapor

Förskrapor

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

Jenny Datum/Date

TST

Datum/Date

Jenny

Datum/Date

1 /1

Rev.

Ritad av/Drawn by Kontr. av/Check by Skala/Scale

Ritnings nr./Drawing no.

1:4

Godk. av/Appr. by Sida/Sheet

Bladprofiler förskrapor

Jenny 1:4 Ritad av/Drawn by Kontr. av/Check by Skala/Scale Datum/Date

220TST 630

Jenny

Skala/Scale Ritad av/Drawn by Kontr. av/Check by Bladprofiler

www.vendig.se Ritad av/Drawn by Kontr. av/Check by Jenny Kontr. av/Check by Skala/Scale Ritad av/Drawn by www.vendig.se Sweden info@vendig.se 1 : 4 by info@vendig.se Jenny Datum/Date Godk. av/Appr. 

Box 62 Box 62 SE-532 21 SKARA SE-532 21 SKARA Phone:+46 511 173 60 Phone:+46 511 Fax:+46 173 60 511 176 30 Fax:+46 511 176 30

Box 62 Box 62 SE-532 21 SKARA Box 62 SE-532 21 SKARA Phone:+46 51121 173 60 SE-532 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30173 60 Phone:+46 511 Fax:+46 511 176 30 Fax:+46 511 176 30

info@vendig.se

Bladprofiler

Fax:+46 511 176 30

www.vendig.se info@vendig.se

Bladprofiler

Bladprofiler förskrapor

Ritnings nr./Drawing no.

180TST ✔ TST

Förskrapor

Ritnings nr./Drawingförskrapor no. Bladprofiler

Ritad av/Drawn by Kontr. av/Check by Skala/Scale Datum/Date

TST TST

Bladprofiler

9930 Sweden

www.vendig.se info@vendig.se

Vi förbehåller oss rätten till konstruktionsändringar

180/130 Förskrapor

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30 www.vendig.se Sweden info@vendig.se www.vendig.se

Box 62 SE-532 Box2162SKARA Phone:+46 173 60 SE-532 21511 SKARA Fax:+46 511 Phone:+46 511 176 173 30 60

Bladprofiler

Vi förbehåller oss rätten till konstruktionsändringar Vi förbehåller oss rätten till konstruktionsändringar

Förskrapor Förskrapor Bladprofiler

Sweden

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

✔ 2,3 m/s

Vi förbehåller oss rätten till konstruktionsändringar

Sweden Sweden

220TST 1000

www.vendig.se Ritad av/Drawn by Kontr. av/Check by Skala/Scale Jenny av/Drawn by Kontr. av/Check by Skala/Scale 1:4 info@vendig.se Ritad www.vendig.se 1:4 Datum/Date Godk. av/Appr. by Sida/Sheet info@vendig.se Jenny Datum/Date Godk. av/Appr. by Sida/Sheet 1 /1 1 /1 Ritnings nr./Drawing no. Rev.

9900

sirius hm

TST We reserve the right to design changes

sirius

✔ 2,3 m/s

220✔ 2,3 m/s 630 TST

Box 62 SE-532 Box21 62SKARA Phone:+46 511 173 60 SE-532 21 SKARA Fax:+46511 511173 17660 30 Phone:+46 Fax:+46 511 176 30

220630

We reserve the right to design changes We reserve the right to design changes

175/140/ ✔ 100

9100

We reserve the right to design changes

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

e ht id ig rb he ca

hampus

**

d ee

n sp le / a y elt ere ch le rsib b l h x u ve otlad td r ø p re ma b s c

*

r

oss rätten till konstruktionsändringar Vi förbehåller We reserve the right to design changes Vi förbehåller oss rätten till konstruktionsändringar We to design changes reserve the right

Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

se

n rie

oss oss till konstruktionsändringar rätten We We to design reserve changes the the rightright till konstruktionsändringar rätten Vi förbehåller to design reserve changes Vi förbehåller Vi förbehåller oss rätten till konstruktionsändringar We reserve the right to design changes

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt ej heller till tredje och eller sig för vår person att på utlämnas annat sätt mångfaldigas, eller medgivande without our in orginal, purpose third part form and manufactoring to enclosure or used - shown or given tobelong - neither or dublicate must not be copied to us. They for all the This drawing i ursprungligt De delgivas eller utan vårt nor in modified får icke vare skick ritning och alla ändrat bilagor förbliva Dennakopieras egendom. of,or to infringments here to legal will part action withforthe law. support of existing be taken nor inAs modified eller utlämnas till tredje person och ej hellerpermission. för attmed sätt delgivaslag. eller mångfaldigas, på annat kopieras medgivande without our purpose to third form - shown manufactoring or used given gällande stöd av för tillverkning. härav beivras Överträdelse användas permission. As to infringments here of, legal action will be taken with the support of existing law. användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

me na

op

3 m/s

✔ ✔


me na

tst-scraper

se

n rie

tst

e ht id ig rb he ca

228

220630

hampus secondary

9200

pontus 9500 secondary

9500

95/70

8100

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law. Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

Jenny

Datum/Date

Finskrapor Bladprofiler

1:4

8150

Godk. av/Appr. by Sida/Sheet

1 /1

Finskrapor 170

 Ritnings nr./Drawing no.

Rev.

Bladprofiler finskrapor

Jenny 1:4 www.vendig.se Ritad av/Drawn by Datum/Date Godk. av/Appr. Jenny by Sida/Sheet Sweden info@vendig.se 1 /1 Datum/Date

Kontr. av/Check by Skala/Scale

1:4

8150 9750

hm scraper board 8150

9777

8150

8100 8150

Rev. www.vendig.se

Jenny Bladprofiler finskrapor Sweden info@vendig.se Ritnings nr./Drawing no. Rev. Datum/Date Bladprofiler finskrapor Godk. av/Appr. by

1:4

Bladprofiler

Sida/Sheet

Finskrapor Bladprofiler

9750

8150

1 /1

Ritnings nr./Drawing no.

Rev.

Bladprofiler finskrapor

97509330

9750 9330

hampus hm scraper board 9330

Ritad av/Drawn by Kontr. av/Check by Skala/Scale

Jenny

1:4

9750

115

✔ 

Sweden

Sweden

www.vendig.se info@vendig.se

Finskrapor 100 ✔ Bladprofiler

Bladprofiler Sweden info@vendig.se

Finskrapor

Datum/Date

Godk. av/Appr. by Sida/Sheet

1 /1

Ritad av/Drawn by Kontr. av/Check by Skala/Scale Ritnings nr./Drawing no. Rev. Jenny

Bladprofiler finskrapor

Datum/Date

1:4

Godk. av/Appr. by Sida/Sheet

Jenny

2,3 m/s

1 /1 Ritnings nr./Drawing no.

Rev.

Bladprofiler finskrapor

1:4 Godk. av/Appr. by Sida/Sheet

1 /1 Ritnings nr./Drawing no.

Bladprofiler finskrapor

Rev.

2,3 m/s

✔ 2,3 m/s 1:4

Jenny

Datum/Date

Double sided!

Godk. av/Appr. by Sida/Sheet

Ritad av/Drawn by Kontr. av/Check by Skala/Scale

Tools are needed to change the segments/ blade.

Finskrapor www.vendig.se

2,3 m/s

2,3 m/s

Ritad av/Drawn by Kontr. av/Check by Skala/Scale Datum/Date

Bladprofiler 

9330

www.vendig.se info@vendig.se

Finskrapor

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

9330

Vi förbehåller oss rätten till konstruktionsändringar

8127

9330 8150

9750 9330

www.vendig.se info@vendig.se

80

8127

9750

flexus 2

✔ 2,3 m/s

Godk. av/Appr. by Sida/Sheet Ritad av/Drawn by Kontr. av/Check 1 /1 by Skala/Scale

8100

Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, or dublicate in orginal, copiedform They must belong and all the This drawing i ursprungligt De fårmedgivande eller ändrat skick utan förbliva without ritning icke vare sig och alla bilagorpurpose Denna vår egendom. in be nor in modified form - shown to or given to third part nornot modified tillenclosure heller ochtoejus. eller utlämnas för att tredje person annat sätt delgivas eller mångfaldigas, på vårt kopieras our to third part or used for manufactoring purpose without our for manufactoring or used - shown -toneither or given in modified ej heller till tredje person sätt delgivas utlämnas mångfaldigas, purpose without for manufactoring As to infringments permission. As to infringments here of, legal actionmedgivande permission. here of,our legal action will be taken with the support of existing law. will be takenkopieras with theeller of existing för law.att på annat användas support lag.form - shown to or given to third part or used av gällande med stödnor för eller beivras tillverkning. häravoch Överträdelse permission. As to infringments here of, legal action will be taken with the support of existing law. användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

8100

Finskrapor

Box 62 SE-532 21 SKARA Bladprofiler Phone:+46 511 173 60 Box Fax:+46 511 176 3062 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

Ritad av/Drawn by Kontr. av/Check by Skala/Scale

Ritnings nr./Drawing no. Ritad av/Drawn by Kontr. av/Check by Skala/Scale

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

8100

8100

www.vendig.se info@vendig.se

Sweden

8100

9777

2,3 m/s

Vi förbehåller oss rätten till konstruktionsändringar

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

✔ 

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 www.vendig.se Fax:+46 511 176 30 Sweden info@vendig.se

9330

We reserve the right to design changes

Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

95/70

8127

9750

9330

Vi förbehåller oss rätten till konstruktionsändringar

9300

We reserve the right to design changes

8100

Vi förbehåller oss rätten till konstruktionsändringar design changes Wechanges reserve the right oss rätten till konstruktionsändringar förbehåller Vi to We reserve the right to design We reserve the right to design changes

9330

Vi förbehåller oss rätten till konstruktionsändringar

8127

pu scraper board

9500

No tools are needed to change segments/ blade.

*Scrapers that has segments with a carbide tip is not suitable for mechanical belt fasteners. Finskrapor** Recomended max belt speed. Bladprofiler 

Sweden

www.vendig.se info@vendig.se

1 /1

Ritnings nr./Drawing no.

Rev. Kontr. av/Check by Skala/Scale Ritad av/Drawn byfinskrapor Bladprofiler

Jenny

Datum/Date

1:4

Godk. av/Appr. by Sida/Sheet

1 /1

Bladprofiler 

Sweden Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

8127

9500

Sweden

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

xx

97509330

9777

hampus scraper board

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30 Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

8150 9750

8127

8127

8127

8150

We reserve the right to design changes

8127

9800

konstruktionsändringar oss to oss oss oss rätten till konstruktionsändringar förbehåller förbehåller förbehåller till till konstruktionsändringar till konstruktionsändringar rätten rätten Vi Virätten design design design We reserveWe We WeVireserve to design toförbehåller reserve changes changes thereserve thechanges theVi right to the rightchanges right right

8127

90

8150

9777

9777

2,3 m/s

8100

9750

9777

Up to 270°

8100 8150

9500

arcus

od s a

fo

8100

9500

9500

5 m/s

l

o to ge

sp / an le y er e ch elt le rsib b h l t x u ve o lad td r ø p re b ma s c

*

r

**

d ee

op

www.vendig.se info@vendig.se

Finskrapor

Ritnings nr./Drawing no.

Rev.

Kontr. av/Check by Skala/Scale Ritad av/Drawn byfinskrapor Bladprofiler

Jenny

Datum/Date

1:4

Godk. av/Appr. by Sida/Sheet

1 /1

ordering codes

Bladprofiler

Ritnings nr./Drawing no.

Bladprofiler finskrapor

Rev.

To order articles that are not the standard product, this is how the article numbers are built: Standard art. no. + alternative height on scraper segment (H) + material option Example: 9106-140 9108-100-AS 9910-CR

A Hampus pre-scraper B-W 650, segment height 140mm A Hampus pre-scraper B-W 800, segment height 100mm in Anti-Static PU A Sirius pre-scraper B-W 1000 in Chemical resistent PU 5


hampus pre-scraper 9100

hampus pre-scraper with carbide – Our most versatile belt cleaner.

Hampus pre-scraper 9100 is our most versatile belt cleaner which is suitable for most working environments. Hampus scraper has segments that can move independently of each other which give high flexibility, providing very effective cleaning. For high durability, the segments are made of polyurethane with a carbide tip. Carbide ensures reliability and a long service life. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley immediately below the flow of material. Recommended for ø 220-630mm pulleys.

scraper blade options In addition to the standard segment which is 175mm high, lower segments for a more compact installation are available. 6

(See table page 4)

standard

as


1

1. Scraper blade 9101 2. Beam 3. Holder H complete 8388 4. Lever arm complete 9178

4

2 3

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. From B-W 1000 the scraper is supplied with dual lever arms. From B-W 1600 the scraper is supplied with Holder HD.

scraper blades

100

H STANDARD ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

9104

400

4

400

1100

500

5

500

1200

650

6

600

1300

800

7

700

1500

9105

9106 9108 9110 9112

9114

tion

BEAM LENGTH

1000

9

900

1700

1200

11

1100

1900

9116

1400

13

1300

2100

1600

15

1500

2300

9120

1800

17

1700

2500

2000

19

1900

2700

9118

direc

195

Art.no. 9101 H =175 (standard) Art.no. 9101-140 H =140 Art.no. 9101-100 H =100

Belt

90 °

The scraper blade is made of PU with a carbide edge. The standard blade height is 175mm . For a more compact installation see the scraper blade alternatives below.

Wider belt cleaners can be offered on request. 7


hampus pre-scraper 9100-PU

hampus pu pre-scraper with pu segments – Extending the Hampus family.

Hampus is our most versatile belt cleaner series suitable for most working environments. It consists of individual scraper segments that can move independently of each other for maximum flexibility providing very effective cleaning. The PU blades are less harsh against worn rubber belts and is a popular alternative amongst our customers. The segments can be delivered for several different specialized operations like industries with food grade demands. It works well in reversible operations. The blade is compatible with the Hampus frame. 9102-V3 is interchangeable with 9101, the Hampus pre-scraper standard segment. Recommended for ø 220-630mm pulleys.

scraper blade options (See table page 4)

Hampus prescraper with PU segment. 8

standard

as

cr

food grade


1 2

4

1. Scraper blade 9102-V3 2. Beam 3. Holder H complete 8388 4. Lever arm complete 9178

3

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are also available on request. From B-W 1000 the scraper is supplied with dual lever arms. From B-W 1600 the scraper is supplied with Holder HD. Belt direction

scraper blade

H = 175

100 195

H

Art.no. 9102-V3

BEAM LENGTH

ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

9104-PU

400

4

400

1100

9106-PU

500

5

500

1200

600

6

600

1300

9110-PU

800

7

700

1500

1000

9

900

1700

1200

11

1100

1900

9105-PU

9108-PU 9112-PU

9114-PU

9116-PU

1400

13

1300

2100

1600

15

1500

2300

9120-PU

1800

17

1700

2500

2000

19

1900

2700

9118-PU

Wider belt cleaners can be offered on request. 9


hampus heavy pre-scraper 9130

hampus heavy pre-scraper with carbide

– With a powerful scraper segment for heavy industry. The Hampus pre-scraper 9130 has the same basic design as the standard model – the Hampus pre-scraper 9100, with a more powerful scraper segment for heavier applications. The Hampus pre-scraper 9130 is used in the mining industry and other demanding work environments. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley immediately below the flow of material. Recommended for ø 220-1000mm pulleys.

In addition to the standard model which is 175mm high, a lower segment for a more compact installation is available. Double segment are recommended for problems with belt travel. Art.no. 9131-DH H=175, double right Art.no. 9131-DV H=175, double left Art.no. 9131-140DH H=140, double right Art.no. 9131-140-DV H=140, double left 10

scraper blade options (See table page 4)

standard

as


1

4

2 1. Scraper blade 9131 2. Beam 3. Holder H complete 8388 4. Lever arm complete 9178

3

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. From B-W 1000 the scraper is supplied with dual lever arms. From B-W 1600 the scraper is supplied with Holder HD. The scraper blade is made of PU with a carbideAedge. The standard blade height is 175mm . For a more compact installation see the scraper blade alternatives below.

STANDARD ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

9134

400

4

400

1100

500

5

500

1200

650

6

600

1300

800

7

700

1500

9135

9136 9138

9140 9142

9144

1000

100

BEAM LENGTH

9

900

1700

1200

11

1100

1900

1400

13

1300

2100

15

1500

2300

9146

1600

9150

1800

17

1700

2500

2000

19

1900

2700

9148

tion

44

B

H

la bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt s eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller ning. Överträdelse härav beivras med stöd av gällande lag.

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

23

direc

90 °

100

H=175 (standard) H=140

H

Art.no. 9131 Art.no. 9131-140

195

scraper blade

Belt

T

Wider belt cleaners can be offered on request. 

www.vendig.se

11

Ritad av/Drawn by Kont

Jenny


sirius pre-scraper 9900

sirius pre-scraper with polyurethane segments – Service-friendly pre-scraper in durable polyurethane.

The Sirius pre-scraper 9900 is a belt cleaner made from durable polyurethane with individual segments mounted in a removable cassette. Each segment is easy to remove when it requires changing and cleaning. Either thread it out sideways or snap it into the aluminium profile. The fast-connect solution is patented: European Patent 2805901. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley immediately below the flow of material. Recommended for ø 220-630mm pulleys.

scraper blade options (See table page 4)

In addition to the standard model which is 180mm high, a lower segment for more compact installation is available. European Patent 2805901. 12

standard

cr


1

6 2

3

B

SKRAP BREDD

4

1. Scraper segment 9901 2. Aluminium profile 9982 3. Beam 4. Brackets RIGHT-LEFT 9980, 9981 5. Holder H complete 8388 6. Lever arm complete 9178

5

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. A From B-W 1000 the scraper is supplied with dual lever arms. BALK LÄNGD From B-W 1600 the scraper is supplied with Holder HD. The scraper blade is made of PU. The standard blade height is 180mm. For a more compact installation see the scraper blade alternatives below.

5 Belt

H

200

Art.no. 9901 H=180 (standard) Art.no. 9901-130 H=130

STANDARD ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

9904

400

4

400

1100

9906

500

5

500

1200

650

6

600

1300 1500

9908 9910 9912

9914

9916

tion

100

scraper blade

9905

direc

BEAM LENGTH

800

7

700

1000

9

900

1700

1200

11

1100

1900

1400

13

1300

2100

1600

15

1500

2300

Wider belt cleaners can be offered on request. 13


sirius hm pre-scraper 9930

sirius hm pre-scraper with carbide edge – A service-friendly pre-scraper for heavy duty.

Sirius HM pre-scraper 9930 is a belt cleaner made from durable polyurethane segments with an integrated carbide edge, fitted in a removable cassette. Sirius HM has a sturdy design for maximal funciton and durability in heavy applications with high demands on the cleanliness. Each segment is easy to remove for exchange or cleaning purpose. The segments snap into the aluminium profile easily or can be threaded into the profile sideways. The attachment of the scraper segment is unique and therefore patented. European Patent 2805901. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of both the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley, immediately below the material flow. Recommended for ø 220-630mm pulleys.

scraper blade options The scraper blade is compatible with the Sirius 9900. 9931 is interchangeable with 9901, the Sirius pre-scraper standard segment. 14

(See table page 4)

standard


1

5

2

6

4 3

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

1. Scraper segment with carbide edge, 9931 2. Removable aluminium cassette, 9982 3. Brackets Right-Left, 9980 – 9981 4. Beam 5. Holder H complete, 8388 6. Spring Lever complete, 9178 From B-W 1000 the pre-scraper is supplied with dual lever arms. From B-W 1600 the pre-scraper is supplied with Holder HD, 8388-HD All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request.

Belt dir ection

Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

The scraper blade is made of PU with a carbide edge.

TST

100

scraper blade

H

200

Art.n0. 9931 H= 180

Sweden Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

Bladprofiler

BEAM LENGTH

ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

9934

400

4

400

1100

500

5

500

1200

9936

650

6

600

1300 1500

9935

9938

9940 9942

9944

9946

www.vendig.se info@vendig.se

Förskrapor

800

7

700

1000

9

900

1700

1200

11

1100

1900

1400

13

1300

2100

1600

15

1500

2300

Ritad av/Drawn by Kontr. av/Check

Jenny

Datum/Date

Godk. av/Appr. b

Ritnings nr./Drawing no.

Bladprofiler förskrapor

Wider belt cleaners can be offered on request. 15


maximus pre-scraper 8900

maximus pre-scraper with polyurethane blade – Our strongest scraper.

The Maximus pre-scraper 8900 is a robust pre-scraper which effectively cleans the conveyor belt in a difficult operating environment. The scraper blade consists of a spring-loaded polyurethane blade which shapes itself to the shape of the conveyor belt and the pulley. Blade replacement is very easy and is carried out entirely without tools. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley immediately below the flow of material. Recommended for ø 400-1000mm pulleys.

scraper blade options (See table page 4)

Changing scraper blade is easy due to a uncomplicated design. 16

standard

as

cr


1

4 5 2 3

1. Maximus PU scraper blade 2. Beam 3. Holder complete 8388 HD 4. Beam extension 8960 5. Lever arm complete 9178

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. All scraper belt width are supplied with dual lever arms.

Belt

direc

tion

270

ART.NO. 8906

B-W

SCRAPER WIDTH

BEAM LENGTH

ART.NO. SPARE BLADE 8926

650

545

1100

8910

800

695

1300

8928

1000

895

1500

8930

8914

1200

1095

1700

8932

1400

1295

1900

8934

1600

1495

2100

8936

8908 8912

8916

Wider belt cleaners can be offered on request. 17


rasmus pre-scraper 8300

rasmus pre-scraper with polyurethane blade – Effective and simple.

The Rasmus pre-scraper 8300 really symbolises our goal to make simple, effective belt cleaners. The scraper blade attachment to the beam makes it easy to remove (without tools) when replacing the blade and when cleaning. Spare blade are available and in stock for all belt widths. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley immediately below the flow of material. Recommended for ø 220-400mm pulleys.

scraper blade options (See table page 4)

Rasmus blade in detail. Full length spare part 8342 is 2.1 - 2.2m. 18

standard

as

cr

food grade


1

4

2

1. Polyurethane scraper blade 2. Beam 3. Holder H complete 8388 4. Lever arm complete 9178

3

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. Belt

direc

tion

155

From B-W 1000 the scraper is supplied with dual lever arms. From B-W 1600 the scraper is supplied with Holder HD.

ART.NO.

B-W

8304

400

8306

500 650 800

8305

8308

BEAM LENGTH

ART.NO. SPARE BLADE

350

1150

8324

450

1250

8325

550

1350

8326

700

1500

8328 8330

SCRAPER WIDTH

8310

1000

900

1700

8314

1200

1050

1850

8332

1400

1250

2050

8334 8336

8312

8316

1600

1450

2250

8320

1800

1650

2450

8338

2000

1850

2650

8340

8318

Wider belt cleaners can be offered on request. The 8342 Rasmus blade full length is 2.1 - 2.2 m. 19


mini-rasmus pre-scraper 8000

mini-rasmus pre-scraper with polyurethane blade – For compact installations.

Mini-Rasmus pre-scraper is a smaller version of Rasmus pre-scraper 8300, with torsion springs made of polyurethane and steel. The scraper blade’s fixing to the beam makes it easy to remove (without tools) when replacing the blade and when cleaning. The simple holder guarantees easy assembly and functionality. Spare blades are available and in stock for all belt widths. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley immediately below the flow of material. Recommended for ø 100-250mm pulleys.

scraper blade options (See table page 4)

Mini-Rasmus blade full length spare part 8042 is 2.4m 20

standard


1

2

4 3

1. Polyurethane scraper blade 2. Beam 3. Holder H complete 8388 4. Lever arm complete 8083

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. From B-W 1000 the scraper is supplied with dual lever arms. From B-W 1600 the scraper is supplied with Holder HD.

Belt

direc

tion

87

ART.NO.

B-W

SCRAPER WIDTH

BEAM LENGTH

ART.NO. SPARE BLADE

8004

400

350

1150

8024

8006

500

450

1250

8025

650

550

1350

8026

8005

8008 8010

800

700

1500

8028

1000

900

1700

8030

8014

1200

1050

1850

8032

1400

1250

2050

8034 8036

8012

8016

1600

1450

2250

8020

1800

1650

2450

8038

2000

1850

2650

8040

8018

Wider belt cleaners can be offered on request. Lillrasmus, total length = 2.4 m art.no. 8042 21


miniscraper pre-scraper 8700

miniscraper

– Effective cleaning for lighter materials. The Miniscraper 8700 is a small belt cleaner that is ideally suited for PVC belts in for example the recycling industry. Vendig’s unique spring lever ensures that the correct pressure is maintained against the belt which reduces maintenance and prolongs the lifespan of the scraper and the conveyor belt. The pre-scraper shall be positioned against the drive pulley immediately below the flow of material. Recommended for ø 100-200mm pulleys.

scraper blade options (See table page 4)

The compact holder with integrated torsion spring. 22

The scraper blade is integrated with the beam.

standard


3

1 1. Beam moulded PU scraper blade 2. PU bushing 8642 3. Holder 8640 or Holder 8641 4. Torsion spring 8643

2

4

All steel parts are in stainless steel. Belt

From B-W 600 the scraper is supplied with dual torsion springs.

direc

tion

80

ART.NO. 8703

B-W

SCRAPER WIDTH

BEAM LENGTH

8704

300

290

540

400

390

640

8706

500

490

740

600

590

840

8708

700

690

940

800

790

1040

8705 8707

8709 8710

900

890

1140

1000

990

1240

8712

1100

1090

1340

1200

1190

1440

8711

Wider belt cleaners can be offered on request. 23


food pre-scraper 8600 2

1

4

1. Beam w. integrated PU scraper blade 2. PU bushing 8642 3. Holder 8640 or Holder 8641 4. Torsion spring 8643

3

food pre-scraper with fda-approved polyurethane – Effective belt cleaning in the food industry.

A pre-scraper that is approved for food usage due to its food grade polyurethane, approved according to EU Regulation No 1935/2004 & FDA. The other parts are made in stainless steel and acid-resistant materials. The pressure on the belt is steplessly regulated with a torsion spring installed in the square tubing. The pre-scraper is positioned against the drive pulley immediately below the flow of material. All steel parts are stainless and acid-proof. From B-W 600 the scraper is delivered with dual torsion springs. Recommended for ø 100-200mm pulleys. ART.NO. 8603

B-W

SCRAPER WIDTH

Belt

300

550

400

650

8606

500

500

750

600

600

850

8608

700

700

950

800

800

1050

8610

900

900

1150

1000

1000

1250

8612

1100

1100

1350

1200

1200

1450

8609 8611

Scraper with b-w up to 1500mm can be offered on request. 24

80

300 400

8607

tion

BEAM LENGTH

8604 8605

direc

scraper blade options (See table page 4)

food grade


tst-f heat-resistant pre-scraper 1 2

Belt

Carbide blade edge. Scraper segment, complete

tion

228

1. TST-FR-ES-150 2. TST-FR-FA-150

direc

belt scraper for hot environments – An effective, heat-resistant belt scraper.

TST pre-scraper is a heat-resistant belt scraper made for hot environments, such as hot mix asphalt plants etc. It has a robust design, made of steel with carbide scraper blades, and can withstand operating temperatures up to +270°. The pre-scraper shall be mounted against the drive pulley immediately below the flow of material. Recommended for ø 220-630mm pulleys. ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

BEAM LENGTH

TST-F0500

500

2

300

1200

650

3

450

TST-F0800

1350

TST-F1000

800

4

600

1500

1000

5

750

1700

TST-F1400

1200

6

900

1900

1400

7

1050

2100

1600

8

1200

2300

1800

9

1350

2500

TST-F0650

TST-F1200

TST-F1600 TST-F1800

Wider belt cleaners can be offered on request. 25


holder h complete 8388 / 8388-HD holder h 8388

1. 8382 Holder H 2. 8383 PU bushing 3. 9161 Beam clamp Incl. bolts, nuts and washers.

11

19

40

holder h 8388-hd

48

1. 8382-HD Holder 2. 8383-HD PU bushing 3. 9161 Beam clamp Incl. bolts, nuts and washers. 1

2

3

spring lever arm complete 9178 Max 700 mm

4 3

275

1. 9181 Lever spring 2. 9182 Spring mount, fits both L and R 3. 9186 Chain 4. 9185 Snap hook 5. 9199 Toothed washer

90 °

spring lever arm

1 2

Holder H and Spring lever 9178 are used in most of Vendigs belt cleaners. For larger belt-widths the bracket Holder HD and two spring levers are used. Detailed installation instructions are included with all belt scrapers. 26

5


universal holder bracket 9390

universal holder

– A bracket for assembling pre-scrapers easily. The Universal holder is a flexible fastening bracket for assembling the primary scraper to the conveyor. It can be assembled in several different ways and angles to fit most conveyors and facilitate the fitting on site. The holder is manufactured from 10mm thick sheet metal and it is galvanized to withstand the environmental wear. All holes and slots are adjusted for M12 bolts (ø12,5) and suited for Vendigs holder H which comes with Vendigs pre-scrapers. The Universal holder 9390 comes as a pair.

2

1

200 110

320 55

9390 1. 9391 Angle bracket, c-c 40mm, 200 x 110 x 70mm 2. 9392 Bracket Universal Holder, c-c 40mm, 320 x 55 x 10mm 27


hampus secondary-scraper 9200

hampus secondary-scraper with carbide – A very popular belt scraper.

Hampus secondary scraper 9200 with scraper segments made of polyurethane with embedded carbide. Each segment is individually flexing against the belt, and is therefore more flexible on the belt, providing a highly effective cleaning. The pressure of the carbide blade against the belt comes from two torsion springs. The installation width of the scraper can be steplessly adjusted. The secondary scraper is placed under the drive pulley.

scraper blade options (See table page 4)

In addition to the standard model which is 95mm high, we also offer lower segments for a more compact installation. 28

standard

as


1

2

3 1. Scraper segment 9201 2. Mounting bracket 3. Beam 4. Holder complete SE18 9289/SE27 9290/SE38 9291

4

All steel parts are electro-galvanized as standard, except for the torsion elements which are in painted stainless steel. Stainless steel or powder-coated alternatives are available on request. The scraper blade is made of PU with a carbide edge.

Belt direction

scraper blade Art.no. 9201 Art.no. 9202

min 30mm

H=95 (standard) H=70

100

H

95

127

H

100

B-W

9204

400

9206 9208 9210 9212

9214

9216 9218

9220

ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt ande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller as för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

9205

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

STANDARD ART.NO.

QTY. SEGMENTS 9500

SCRAPER WIDTH

INSTALLATION DIMENSIONS

ROSTA ELEMENT

4

500

5

400

482-582

SE18

500

582-682

650

SE18

6

600

682-782

800

SE18

7

700

840-940

SE27

1000

9

900

1040-1140

SE27

1200

11

1100

1240-1340

SE27

1400

13

1300

1440-1540

SE27

1600

15

1500

1700-1800 8127

SE38

9777

1800

17

1700

1900-2000

SE38

2000

19

1900

2100-2200

SE38

Wider belt cleaners can be offered on request. 

Sweden Box 62

info@vendig 29

www.vendig.

Finskrapor


pontus secondary scraper 9500

pontus secondary-scraper with carbide

– Carbide segments moving independently of each other for maximum flexibility. Pontus secondary scraper 9500 has individually spring-loaded scraper segment with carbide blade which can move ± 10° during operation and is therefore very flexible against the belt. This means that they have a highly effective cleaning effect. The segments are changed easily using a Phillips screwdriver. The spring lever in combination with the chain means that the scraper pressure can be easily adjusted without tools. The secondary scraper is placed under the drive pulley.

scraper blade options (See table page 4)

Flexible! Each scraper segment can move ±10° providing a more effective cleaning effect. 30

standard


6

1 2 1. Scraper blade 9501 2. Torsion spring long 9532, short 9533 3. Beam 4. Holder H complete 8388 5. Lever arm complete 9178 6. Pontus bent profile 9535

5

3 4

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. The scraper blade is made of PU with a carbide edge.

Belt direction

From B-W 1000 the scraper is supplied with dual lever arms.

min 30 mm 100

B-W

9504

400

9506

650

9505

9508

500 800

9510

1000

9514

1400

9512

9516

1200 1600

Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

ART.NO.

~90

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

H

9500

QTY. SEGMENTS

Wider belt cleaners can be offered on request.

SCRAPER WIDTH

BEAM LENGTH

4

370

1000

5

460

1100

6

550

8127 1200

8

730

1300

10

910

1500

12

1090

1700

14

1270

1900

16

1450

2100

9777

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

31


arcus secondary scraper 9800

arcus secondary-scraper with carbide

– Parabolic scraper with highly effective cleaning effect. Arcus secondary scraper 9800 with scraper segments made of polyurethane with embedded carbide. The segments are mounted in an arc that stretches upwards against the belt under the drive pulley. Thanks to the maximum blade pressure in the centre of the belt, the cleaning effect is highly effective even on worn, bowl-shaped belts. Our unique spring lever arm ensures correct pressure against the belt is maintained, which simplifies service work and reduces maintenance. The secondary scraper is placed under the drive pulley.

The Arcus has side segments (9802) to make the connection with the conveyor belt wear less on the belt, while still maintain a high pressure and effective cleaning. 32

scraper blade options (See table page 4)

standard


2

1

5

3 1. Scraper segment 9801 2. PU side segment 9802 3. Beam 4. Holder H complete 8388 5. Lever arm complete 9178

4

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. The scraper blade is made of PU with a carbide edge. Belt direction

From B-W 1000 the scraper is delivered with dual lever arms.

9805

9806 9808 9810 9812

Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

ART.NO.

100

~70

H

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

9500

9777

B-W

QTY. SEGMENTS*

SCRAPER WIDTH

500

4

400

650

5

500

8127

BEAM LENGTH 1100 1200

800

7

700

1400

1000

9

900

1600

1200

11

1100

1800

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

Wider belt cleaners can be offered on request. * In addition, 2 PU side segments 9802

Sweden

www.vendig.s info@vendig.

Finskrapor Bladprofiler

33


hampus scraper board 9300

hampus scraper board with carbide

– Scraper board with sprung scraper segment. Hampus scraper board 9300 with scraper segments made of polyurethane with embedded carbide. Each segment is individually sprung against the belt, and is therefore more flexible on the belt providing a very effective cleaning effect. The board is normally positioned on the returning belt as a replacement for a return roller. Assesories; either Holder SE or Holder PL together with square tube can be used to fit the scarperboard, see page 41-43.

scraper blade options (See table page 4)

As well as the standard 95 mm segment, there are also lower segments for a more compact installation. 34

standard

as


1

2 3

1. Scraper segment 9201 Scraper segment 9202, compact 2. Mounting bracket 3. Beam All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are also available. The scraper blade is made of PU with a carbide edge.

scraper blade Art.no. 9201 Art.no. 9202

H=95 (standard) H=70

Belt direction

H

160

100

STANDARD ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

9304

400

4

400

700

9306

500

5

500

800

650

7

700

1000

9305

9308

BEAM LENGTH

9310

800

9

900

1200

1000

11

1100

1400

9314

1200

13

1300

1600

1400

15

1500

1800

1600

17

1700

2000

1800

19

1900

2200

9312

9316 9318

Wider belt cleaners can be offered on request. 35


pu scraper board 8100

pu scraper board in polyurethane – A popular and affordable scraper board.

Replace one of the conveyor’s return rollers with the PU scraper board by threading a square tube (art. no 8127, not included in the 8100 series) through the embedded tube, fitting it to the conveyor frame. This is a very popular and affordable scraper that can easily be turned to use the other edge when one side is worn. It also works well in reversible operations. Normally supplied in 2.2m lengths but can be easily cut to fit your needs. Suitable as standard for several mobile crushers.

scraper blade options (See table page 4)

standard

170

Belt direction

ART.NO.

B-W

LENGTH

8104

400

350

8106

500

450

650

550

800

700

8105

8108 8110 8112

8114

36

900

1200

1100

8116

1400

1300

1600

1500

8120

1800

1700

2000

1900

Full length

2200

8118

Assesories Holder PL and square tube 8127, see page 42-43.

1000

8122


hm scraper board 8150

hm scraper board with carbide edge

– Suitable as standard for several mobile crushers. HM-scraper board 8150 is made of polyurethane, with an embedded carbide blade. Replace one of the conveyor belt's return rollers for a HM scraper board by threading a square tube through the embedded tube and hooking onto the framework. The carbideensures operational reliability and a long service life.

scraper blade options Belt direction 80

(See table page 4)

standard

ART.NO.

B-W

SCRAPER WIDTH

TOTAL LENGTH

8155

500

600

650

8158

650

700

750

800

900

950

8156 8160 8162

Assesories Holder PL and square tube 8127, see page 42-43.

8164

8166

1000

1100

1150

1200

1300

1350

1400

1500

1550

1600

1700

1750 37


flexus 2 9750

flexus 2 with carbide

– A scraper board for reversible operation. Flexus 2 9750 is a scraper board for reversible belts. The carbide blades are embedded in the individual polyurethane scraper segments. Flexus 2 shall be fitted on the underside of the return party. The scraper board is usually substituting a return roller against the returning belt.

Adapter 9777

scraper blade options (See table page 4)

Assesories Holder PL and adapter 9777 can be used to fit Flexus 2, see page 42-43 38

standard

as


4

1 3 2 1. Scraper segment 9751 2. Beam 3. Pendulum 9774 4. Spring steel rod 9775 All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. Carbide encased in polyurethane.

115

Belt direction

BEAM LENGTH*

ART.NO.

B-W

QTY. SEGMENTS

SCRAPER WIDTH

9754

400

4

400

700

500

5

500

800

9755

9756 9758

9760 9762

9764

650

7

700

1000

800

9

900

1200

1000

11

1100

1400

1200

13

1300

1600

9766

1400

15

1500

1800

1600

17

1700

2000

9769

1800

19

1900

2200

2000

21

2100

2400

9768

Wider belt cleaners can be offered on request. *Brackets for fitting is not included. 39


hampus hm scraper board 9330

hampus hm scraper strip with carbide edge – A universal strip for own scraper manufacture.

Hampus Hm scraper strip 9330 in polyurethane with an embedded carbide blade. The scraper is an alternative to a polyurethane strip, easily fitted in a metal frame or on an existing scraper. The carbide ensures operational reliability and a long service life.

scraper blade options

Belt direction 100

(See table page 4)

standard

ART.NO. 9333

20x100x300

9334

20x100x400

9336

20x100x600

9335 9337

9338

9339

9340 40

SIZE

20x100x500 20x100x700 20x100x800 20x100x900 20x100x1000

ART.NO. 9341

9342

SIZE 20x100x1100 20x100x1200

9344

20x100x1400

9346

20x100x1600

9350

20x100x2000

9345

9348

20x100x1500 20x100x1800


holder se

D

1

2

E

P A

B

1. Bracket 2. Rosta element

øC

ø10,5

holder se with rosta elements

– Easy to fit brackets and clamping element. Holder SE with adjustable clamping element and mounting plates for ease of assembly of belt scraper. The installation dimensions can be steplessly adjusted on the mounting plate. Preload the blue clamping elements with pipe wrench – equally on each side – to the desired pressure, tighten the screws with a torque wrench. All steel parts are electro-galvanized, except the torsion spring package which is painted as standard. There is a stainless steel alternative.

ART.NO. 9289

9290 9291

ROSTA ELEMENT

BRACKET

A

B

C

D

E

F

SE18

9288

210

50

60

138

M10

80

SE27

9286

235

60

80

180

M12

110

SE38

9287

265

60

95

232

M16

140 41


Bracket 8891 can together with 8890 Pipe ø40x2000mm be used to assemble ploughs Maxi 8800, Maxi foldable 8800-VF and Plough heavy duty 2800 to the conveyor frame.

2

(13)

0

6

2000

197

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

Ø4

bliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt faldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller delse härav beivras med stöd av gällande lag.

2000

och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller r tillverkning. Överträdelse härav beivras med stöd av gällande lag.

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

42

årt eller

15

2

adapter flexus 9777 The 9777 adapter is designed to be used to assemble Flexus 2 to the conveyor frame together with Holder PL 9390.

square tube 8127 It is a spare part in Diagonal plough 8400. It fits PU Scraper board 8100 and HM scraper board 8150 and is designed to fit Holder PL. It can also be used with Hampus scraper board 9300 with minor changes.

35

bracket 8891 / pipe 8890

100

40

M10x1.5

1 1 8891 Pos Antal Art.nr


holder pl 9380 M24

ø12 238

3

140 ± 60

2 1

15x35 1. PU bushing 9383 2. Holder threaded part 9384 3. Angled bracket 9385

holder pl

– Universal fixing bracket for band scraper boards. A robust and easy to mount holder designed for Vendig's scraper boards. The holder has several adjustment possibilities, it is adjustable in height and can be angled against the conveyor belt. A square tube passes through the PU bushing for Flexus 2. A pair of adapters 9777, is needed to fit the scraper. All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request.

fits these scraper boards:

8100 PU scraper board + square tube 8127.

8150 HM scraper board + square tube 8127.

9750 Flexus 2. adapter 9777 is also needed. 43


vendig prime tracker

vendigs durable prime tracker

– A unique belt guide that also works in reversible operations. No more misalignments, no more wear of rolls! A belt guide is a roll that guides the conveyor belt back to the center when it starts to misalign. Even small deviations from the center line cost energy in the form of wear of rolls and strips. Vendig Prime Tracker responds to the slightest deviation and immediately guides the belt back to the center. When the belt is centered, the belt guide rolls with the belt, without affecting the belt. Vendig Prime Tracker runs by the conveyor’s returning belt and shall always have full contact with the belt, therefore the steering force is high and the start friction low. Note that the belt also moves vertically when it is misaligning. Therefor Vendig Prime Tracker is designed to handle movements in both directions to keep the contact surface on the belt at all times. Vendig Prime Tracker works great for reversible operation and can be installed under or over the returning belt. The product has a long life span. The Prime Tracker replaces an idler roll. The distance between the Prime Tracker and return pulley is recommended to be roughly 3 x belt width adjust the distance between tracker and belt to achieve best force of contact.

44


180

ØD

Ød

This drawing and all the enclosure belong to us. They must not be copied or dublicate - neither in orginal, nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

Belt moves sideways - The Prime Tracker directs the belt back on track.

51 L2

ART.NO.

B-W

L

3105

500

550

3106

650

700

3108

800

850

3110

1000

1050

3112

1200 Måttabell

1250

Art 3114

B-W no 3105 500 3114-HD 3106 650 3116 3108 800 3110 1000 3118 3112 1200 3120 3114 1400

1400 L

L2

ød1450 øD

5501400 900 700 1050 8501600 1200 1050 1800 1400 1250 1600 2000 1500 1900

38 1500 194 38 194 1700 38 194 38 1900 194 38 194 2100 50 225

Denna ritning och alla bilagor förbliva vår egendom. De får icke vare sig i ursprungligt eller ändrat skick utan vårt medgivande kopieras eller mångfaldigas, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller användas för tillverkning. Överträdelse härav beivras med stöd av gällande lag.

nor in modified form - shown to or given to third part or used for manufactoring purpose without our permission. As to infringments here of, legal action will be taken with the support of existing law.

s, för att på annat sätt delgivas eller utlämnas till tredje person och ej heller härav beivras med stöd av gällande lag.

A cylindrical tracker has the same peripheral speed over the whole surface. A crowned roll has different speeds at its center and roll edges. Using a crowned roll may result in insufficient belt guidance and worn out roll ends. This is why Prime Tracker is cylindrical.

L B

L2 900 1050

Art B-W no 3105 500 3106 650 3108 Ød800 3110 1000 3112 1200 38 3114 1400

38

Måttabell L

L2

550 700 850 1050 1250 1500

900 1050 1200 ØD 1400 1600 194 1900

194

ød øD 38 38 38 38 38 50

194 194 194 Weight 194 194 41 225

46

1200

38

194

52

1400

38

194

59

1600

38

www.vendig.se

194info@vendig.se

Sweden

(kg)

Ritad av/Drawn by Kontr. av/Check by Sk

67

J Schubert

1800

38

194

Datum/Date

1900

50

225

2000

50

225

114 Måttritning

2200

50

225

134

2400

50

225

144

Box 62 SE-532 21 SKARA Phone:+46 511 173 60 Fax:+46 511 176 30

79

Godk. av/Appr. by Sid

Ritnings nr./Drawing no.

Re

123

45


pu belt guide roller 3302 ØD

ØD

ØD

L

L

L

pu belt guide roller in durable polyurethane – An extremely effective and popular belt guide. A robust steel roller with superior ball bearings and a M20x45 M20x50 fitted sleeve made of durableM20x50 polyurethane, providing gentle support for the conveyor belt.

L

ØD

Fastening bracket for PU belt guide roller. Right 3303 & Left 3304 can be ordered separately. 15-20

20x50

°

ø122

Belt direction

ø80

90

2

155

1

1 PU-sleeve 3306 2. Beltguide roller 3316

M20x45

more belt guide rollers

3316

ø63x100/145 M20x45

46

3320

ø76x130/180 M20x45

3325

ø76/90x130/180 M20x45 with PU-sleeve 3310 3310 PU sleeve sep. ø90/76x130


discus belt support 3463-3499

discus belt support

– A simple belt guidance. The Diskus belt support is a side guide disc of polyurethane which is pressed onto a return roller and is locked into place with a set screw.

Art.no. 3463/ 3464

øDI

B

Art.no. 3476/ 3489/ 3498/ 3499

øDY

øDI

øDY

The Diskus reduces the risk that the belt cuts into the framework.

B

ART.NO.

ØDI

ØDY

B

3463

63

190

35

3476

63

250

55

76

190

25

3464 3489

3498

3499

89

200

25

108

215

28

133

250

32 47


pu striking roller 3500

Fits on Vendig's return rollers ø63.

pu striking roller in durable polyurethane – For cleaning chevron belts.

The PU striking roller is an option when a belt scraper can not be used, for example when the conveyor has a chevron belt. The polyurethane striker sleeves are fitted onto a return roller that strikes the belt 5-7 times per second at normal belt speed, which means that any particles that are attached fall off. Belt direction

NV: 14x8.5 B track

B-W

ø63

ø20

L

RL EL AL

The striking roller can be fitted to the return run's upper or lower side.

ø115

ART.NO.

B-W

RL

EL

AL

AMOUNT SLEEVES

L

3504

400

500

508

533

3

100

3506

500

600

608

633

3

100

650

750

758

783

3

125

3510

800

950

958

983

4

125

1000

1150

1158

1183

4

150

3514

1200

1400

1408

1433

5

150

1400

1600

1608

1633

6

150

3505

3508 3512

3501 The PU striker sleeves are cut to the desired length. Max 1200mm. 48


belt brush belt cleaner

✓ ✓ ✓ ✓ ✓

spring loaded durable maintenance free reliable painted blue

motorized belt brush

– A complete belt brush ready for installation.

523

A motorized belt brush cleaner is an alternative for cleaning of chevron- or cleated belts. The ø300mm brushroll have nylon bristles. The brush, shaft, reduction gearbox and 0,75 kW motor are assembled in a steel frame that shall be fitted in the conveyor frame. The pressure of the bristles are adjusted using a spring. The Brushroll is exchangeable. The belt brush is available for belt-widths 400-1600mm. L1

Belt direction

315 ART.NO.

B-W

3534

400 500 650

800

1200

300

800

950

1350

300 300

3535

3536

0-200mm

This beam is welded to the conveyor frame.

The brush must be straight and middle to frame. The tension of brush shall be adjusted so that the bristles bend some. (you have to be able to pull your hand trough).

L2

3538

L1

L2

Ø

550

950

300

650

1050

300

3540

1000

1150

1550

3544

1200

1350

1750

300

1400

1550

1950

300

1600

1750

2150

300

3542

3546

Wider brushes can be offered on request. 49


maxi plough 8800

maxi plough in durable polyurethane – Robust and effective plough.

The Maxi plough 8800 is a robust and slightly heavier plough. When fitting, a tube ø40 mm is threaded through the PU link and is then attached to the conveyor belt's framework. The plough prevents loose material on the return run from coming between the return pulley and the belt. This reduces the risk of damage, holes developing in the conveyor belt and belt travel. The scraper blades of polyurethane are easily replaced and can be bought in full length 2.2m as art.no. 8842.

scraper blade options (See table page 4)

Bracket 8891 and pipe 8890, accessories frame for assembling of the Maxi plough. 50

standard

as

cr

food grade


4

1

3

4

1. PU link in polyurethane 8888 2 2. Maxi plough scaraper blade 3. Electro-galvanized steel frame 4. Fixing holes for extra support and reversible operations All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. Belt direction

ø4 90

130

1 L ART.NO.

B-W

L

ART. NO. SPARE BLADE

8804

400

380

8824

8805

500

430

8825

8806

650

520

8826

8808

800

570

8828

8810

1000

680

8830

8812

1200

780

8832

8814

1400

865

8834

8816

1600

990

8836

8818

1800

1095

8838

Maxi plough strip total length 2.2 m art.no. 8842 51


maxi plough Foldable 8800-VF and plough heavy duty Foldable 2800

– Two foldable ploughs that are easy to handle and fit. Plought heavy duty 2800 is sturdy and reliable for heavy applications. The Maxi plough foldable 8800-VF is a functional, foldable variant of the Maxiplough for larger belt-widths. These ploughs series are foldable which makes them easier to handle when installing them in the conveyor. Shipping costs are also lower when folded, making it an economical alternative. Ploughs prevent material on the returning belt from entering between the return pulley and the belt. This reduces the risk of wandering belts, mistracking, damage and holes developing in the conveyor belt. The plough are assembled with a pipe, ø40mm, fixed in the conveyor frame. The scraper blades of polyurethane are easily replaced. Belt direction

130/150

70/90

110-170

1

ø4

A foldable Vendig plough in folded position.

L scraper blade options (See table page 4)

Bracket 8891 and pipe 8890, accessories frame for assembling of the Maxi Ploughts and Plough HD. 52

standard

as

cr


1. 8889 M16 x 200mm, 2 pcs 2. 2860 Joint right 3. 2861 Joint left 4. 8888 PU link, 2 pcs 5. Plough frame Siriusplog, see table 6. Scraper blade, see table 7. 2862 Distance B-W 1200-1800 /2863 Distance B-W 2000-2600

6 7 1

2

3

7

5

4

6

MAXI PLOUGH FOLDABLE 8800-VF 8812-VF

8814-VF

ART NO. ART NO. PLOUGH FRAME SPARE BLADE

B-W

WIDTH

L

1200

1330

675

2872 R/L

8832

1400

1530

775

2874 R/L

8834

8816-VF

1600

1725

875

2876 R/L

8836

8820-VF

1800

1920

975

2878 R/L

8838

2000

2120

1075

2880 R/L

8840

8822-VF

2200

2320

1170

2882 R/L

8843

2400

2520

1270

2884 R/L

8844

2600

2715

1370

2886 R/L

8846

8818-VF 8821-VF

8823-VF

70

ART. NO.

20

PLOUGH HEAVY DUTY FOLDABLE 2800 ART NO. ART NO. PLOUGH FRAME SPARE BLADE

B-W

WIDTH

L

2812

1200

1330

675

2872 R/L

2832

2814

1400

1530

775

2874 R/L

2834

2816

1600

1725

875

2876 R/L

2836

2820

1800

1920

975

2878 R/L

2838

2000

2120

1075

2880 R/L

2840

2824

2200

2320

1170

2882 R/L

2842

2400

2520

1270

2884 R/L

2844

2600

2715

1370

2886 R/L

2846

2818

2822

2826

90

ART. NO.

24 53


pu plough 8500

durable pu plough

– Easy to fit.

The PU plough 8500 is attached to the conveyor system with a chain and then lies loose on the belt. The plough prevents loose material on the return run from coming between the return pulley and the belt. This reduces the risk of damage, i.e. holes developing in the conveyor belt and belt travel. The plough is double sided and can just be flipped to wear on the other side of the blade , which doubles its life span.

scraper blade options (See table page 4)

Pictures of PU plough details. 54

standard


1 4 5

3

2

1. Spacing bar 2. Plough strip, polyurethane 3. Bracket 8580 4. Side guide 8581 5. Chain 8582 All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request.

255

125

Belt direction

L ART.NO.

B-W

L

ART. NO. SPARE BLADE

8504

400

280

8524

8506

500

330

8525

650

390

8526

8505

8508 8510

800

450

8528

1000

540

8530

8514

1200

640

8532

1400

740

8534

1600

840

8536

8512

8516

55


pulley scraper 8200

pulley scraper with polyurethane segment – For effective cleaning of the tail pulley.

Pulley scraper 8200 scrapes the return pulley clean. The scraper blades are made of polyurethane and have wings which scrape off and push the material to the side. The standard configuration is half of the segments 8201-H and halv 8201-V, but other configurations can be delivered on request. Spill on the belt's return part is pushed sideways until it falls down from the belt. This reduces the risk of belt travel and holes developing in the conveyor belt. Vendigs unique spring lever ensures that the correct pressure is maintained against the belt which simplifies service work and reduces maintenance. Recommended for pulleys from diameter ø300mm and larger.

scraper blade options (See table page 4)

Detailed picture of pulley scraper. 56

standard

as


1

2

5

3

1. Scraper segment, 8201-V 2. Scraper segment, 8201-H 3. Beam 4. Holder H complete 8388 5. Lever arm complete 9178

4

All steel parts are electro-galvanized as standard. Stainless steel or powder-coated alternatives are available on request. From B-W 1000 the scraper is supplied with dual lever arms. From B-W 1600 the scraper is supplied with Holder HD. Belt direction

175

B-W

8204

400

5

500

900

500

6

600

1000

8206

SCRAPER WIDTH

BEAM LENGTH

ART.NO. 8205

QTY. SEGMENTS

135

650

7

700

1100

8210

800

9

900

1300

1000

11

1100

1500

8214

1200

13

1300

1800

1400

15

1500

2000

8208 8212

8216

1600

17

1700

2200

8220

1800

19

1900

2400

2000

21

2100

2600

8218

57


diagonal plough 8400

diagonal return scraper in durable polyurethane – For reversible operation.

The Diagonal Plough is a sturdy and easy plough. It collects the waste material on one side of the conveyor and is excellent for reversible operations. The plough reduces the risk of damage, i.e. holes developing in the conveyor belt, and wandering belts or mistracking. It prevents material on the returning belt from entering between the return pulley and the belt. The brackets of the diagonal plough are stable, easy to install and adjustable in height. Assemble the plough diagonally into the conveyor frame. The scraper polyurethane blade can be reversed when one side is worn out, but also easily be replaced with a new scraper blade.

2

3

L

170

B-B

1

ART.NO.

B-W

LENGTH OF SCRAPER

LENGTH SQ. TUBE

8405

500

850

1150

8408

650

1050

1350

8410

800

1300

1600

1000

1600

1900

8414

1200

1850

2150

1400

2100

2400

8406

8412

58

1. PU-scraper (blade) 2. Square tube 8127 3. Holder PL 9380 All steel parts are electrogalvanized as standard.

280-401

Belt direction


tpu/pvc Skirting strip

tpu skirting with alu profile – For easy assembling.

Skirting in polyurethane or PVC with an aluminium profile for easy retrofitting and to make exchanging the skirting easy. Rifled back-side to reduce friction against the belt.

tpu strip

• Etherbased Polyurethane • Food grade approved • Flexible at low temperatures • Heat & cold resistant: -30°C – +100°C

ART.NO. 6667

67025-100-ALU

MATERIAL Alu profile TPU + ALUx16

67025-100-ALU-R TPU (Spare part) 6705-100-ALU

6705-100-ALU-R

THICKNESS

WIDTH

See drawing above 2,5mm

100mm

1,9

Ø7,9

• Resistant to oil & terpenes • Self extinguishing • Antistatic • Heat & cold resistant -20°C – +80°C

Ø11,9

1,9

pvc strip

38,8

L

COLOR

SHORE A

3m

x

x

48m

Blue

85

2,5mm

100mm

48m

Blue

85

PVC + ALUx13

5mm

100mm

39m

Yellow

75

PVC (Spare part)

5mm

100mm

39m

Yellow

75 59


skirting strip tpu skirting strip in extremely durable polyurethane – Skirting strip with high sealing capacity. ART.NO. Delivered on a bobbin that is easy to roll out.

THICKNESS WIDTH MM MM

6702-070 6703-070 6702-100 6703-100

70

100

3

70

80

2

100

100 80

3

100

67025-150

4

100

50

2,5

150

90

6706-150

4

150

50

6

150

35

8

150

25

6704-100 6704-150

67048-150

the benefits are many with tpu ✓ ✓ ✓ ✓

2

METRE/ BOBBIN

High sealing capacity Flexible at temperatures down to -30° Low friction against the belt Energy saving

✓ Easy to assemble ✓ Fewer splices ✓ Approved for use with food according to 1935/2004 and 10/2011

self extinguishing skirting tpu/pvc skirting strips in extremely durable polyurethane – Skirting strips that are self-extinguishing ✓ ✓ ✓ ✓

60

Halogen free Polyurethane Self extinguishing FDA approved for use with food Flexible at temperatures down to -30°C

ART.NO.

MATERIAL

6704-250-SS

TPU. & AS

THICKNESS WIDTH MM MM 4

250

METRE/ BOBBIN

SHORE A

35

85


skirting strip pvc durable pvc skirting strip

– Skirting strip for sealing in demanding environments such as sawmills including requirements on ATEX. properties ✓ ✓ ✓ ✓ ✓

ART.NO.

THICKNESS WIDTH MM MM

Self-extinguishing Resistant to terpene Oil resistant Temp range: -20°C – +80°C Atex zone 22 and anti static.

METRE/ BOBBIN

SHORE

6705-100-SS

5

100

45

89

6705-100-SS-075

5

100

45

75

6705-200-SS

5

200

25

89

6705-200-SS-075

5

200

25

75 61


skirting 6450

side sealing strip made of polyurethane

– 3 way seal against the conveyor belt for smaller material sizes. Effective seal between the conveyor belt and side plates when you have problems with material spill at the loading point. The soft 2-lip skirting seals the slack in the belt between the rollers when under load. 6

Skirting 6450 is usually fitted where there is currently a skirt rubber. The strip is made of durable 80° Shore A polyurethane which provides low friction on the conveyor belt.

a

75

Length 2m.

5

.6 rox pp

22

30°

11

62


pu wedge 6750 pu wedge made of polyurethane – Facilitates changing and adjustment of skirt rubber, min. 60° Shore A. When it is time to adjust the skirt rubber, knock out 2 to 3 wedges and the rubber can be pressed downwards. Afterwards, the wedge is striked back into place again and the adjustment is complete. Very easy and time saving! Bracket 6755 is welded to the side plate or loading chute. The PU wedge 6751, is hammered in between the fastening bracket and an angle iron, locking the rubber. 1. Bracket 6755 2. PU wedge 6751

1

A PU wedge kit 6750 includes a bracket and a PU wedge.

2

67

55

82

The angle iron is not included. The PU wedge is fitted 300-400mm apart, a 25x25x3mm angle iron is recommended for skirt, rubber thickness (t) 8-10mm.

120

t

Angle iron

63


return idler safe guard 3600

a ce marked return idler safeguard – For most common return idlers.

A simple and easily assembled safeguard that is adjustable to fit a big range of conveyors and return idler lengths. It can be used for return idlers with a maximum diameter of 133mm. The purpose of the product is to to eliminate nip points on the incoming belt side, blocking access to the danger zone and nip point between the belt and an idler from all sides but it is also prevent the hazard of broken rollers falling down in case of failure due to wear or frozen bearings. It is designed to be compliant with the Machine directive 2006/42/EG , Safety equipment for belt conveyors EN 620 & EN 618 and ISO 13857. As a safety component, Vendigs return idler safeguard is CE marked. It is stable, made of galvanized steel. It comes along with the CE declaration for you to easily update your conveyor documentation.

64


1a

6

3

4

1a

7

1. 2 pcs 2. 1 /2pcs 3. 1 pcs 4. 2pcs 5. 2 pcs 6. 4 pcs 7. 2 or 4

3640 End cover 3641 Basket Side Basket middle 3642 Hinges 3643 Cover plate, adjustable Screw joint Width adjustment

5

5

2

Its openings are maximized according to the enquirements of the norm in order for reurn material to fall through. When the safeguard needs to be opened, open the two screws to swing open the guard that will stay in place in the onesided hinges.

ART. NO.

B-W

3625

500

540 - 750

3626

650

690 - 900

3628 3632

LENGTH

800 - 1000

890 - 1360

1200 - 1400

1340 – 1810

65


oj belt weigher systems

vendigs appreciated belt weigher from oj:s

– A belt weigher system consists of a belt weigher indicator, a weigh frame and a tachometer. Vendig provides Belt weigher solutions through our brand OJ:s Vågsystem. We design and supply belt weighers fitting most brands of crushers, screens and belt conveyors. The aim is to provide secure, high-quality and innovative products that makes managing and controlling the customers production easy. A good example of this is smartTONNES, the cloud service that provides a complete overview of production over time.

– Belt weigher Indicator OJ1436

It has a high-resolution touchscreen display and guides you through simple step by step routines for calibrations, tares and other tasks. A periodic data logging feature is provided to allow continuous storage of process data internally and/or to a USB flash drive. The Belt Weigher is optimized for smartTONNES. Belt Weigher Indicators connects with the loadcell fitted to the Belt Weigher Frame and the tachometer from which it generates a calibrated weight signal and belt speed. Using calibration and control data it continuously calculates the flow of material over the belt and the totalized quantity of material transferred. OJ1436 contains an Ethernet-port, serial interface RS232/485, USB port, four relay outputs and two digital inputs as standard. There are also a variety of options such as Analogue Output and Network Connectivity options including Ethernet /IP, Profibus DP and Device Net. 66


smartTONNES® FULL CONTROL OF THE FLOW WITH THE DIGITAL TOOL smartTONNES® Get full control of your production on mobile, tablet or computer using our belt weigher and the subscription service smart TONNES that stores data through cloud storage. Quick, easy and efficient access to the current flow, material type, total sum, production time and belt status. The information can be exported to other formats such as Excel, if needed.

– Belt weigher units.

OJ’s belt Weigher Units comes in three models, which are customized for all needs. Every scale roller set is tailor made to fit each conveyor and replaces one or more of the existing roller sets. Down to 0.5% accuracy. All moving parts and fittings in stainless steel.

unit oj1250

Loadcell in aluminium accuracy class C3 and with IP67. Surfaces finished with electrolytic surface treatment as standard.

unit oj1330

Loadcell in aluminium accuracy class C3 and with IP67. Surfaces finished with electrolytic surface treatment as standard.

unit oj3510

Loadcell in stainless steel accuracy class C3 and with IP68. Rollerdiameter 108 or 132mm. The units are sandblasted, then painted with a protecting layer and finally coated with a 2-component car paint, in Gulf orange. 67


Box 62 | SE-532 21 Skara | Sweden | Tel +46(0)511-173 60 www.vendig.se | info@vendig.se facebook.com/vendigab    instagram.com/vendig_ab


Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.