3M™ Reusable Half Mask 7500 Series Sizes and weight
Spare parts and accessories
Component
7580
Replacement strap
Large (7503)
7581
Head harness assembly
Approximate weight: 135 grams
7582
Inhalation valve
Shelf life: 5 years from production date when stored at the storage conditions stated on the packaging.
6583
Exhalation valve
7585F
Fabric head cradle
7586
Filter holder (includes valve)
501
Retainer for 5000 Series filters
603
Particulate filter platform
105
Face seal wipe
S-200+
Supplied air respirator
Small (7501) Medium (7502)
*The shelf life as defined above remains an indicative and maximum data, subject to many external and non-controllable factors. It may never be interpreted as a warranty.
Component
Material
Face seal
Silicone rubber
Filter holder
Polybutylene terephthalate
Exhalation valve cover
Polybutylene terephthalate
Inhalation valve
Silicone rubber
Exhalation valve
Silicone rubber
Straps
Polyester/polyurethane
Head cradle
Polyethylene
IMPORTANT NOTICE The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application. All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user. Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control. Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation. Respiratory Protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to respiratory contaminants. 3M offers advice on the selection of products, and training in the correct fitting and usage. For more information on 3M products and services please contact 3M. Personal Safety Division 3M Centre Cain Road, Bracknell Berkshire RG12 8HT www.3M.co.uk/respiratory
3M and Cool Flow are trademarks of 3M Company. Please recycle. Printed in the United Kingdom. © 3M 2022. All rights reserved. Version 7500.2