DATA SHEET 1 : 3 OPEN CABLE TRAYS SILTEC Open Trays S25, S26, S27, S28 and S29 are de-signed to enable fastening of tubing and cable with cable clamps (pg. 8 in Standard Open Trays Brochure; pgs. 6 - 8 in Image Brochure) The use of cable clamps creates space between cables, improving heat dissipation and fulfilling sharply increasing demands on hygiene as it applies to undesirable bacterial growth, deposits of combustible dust, etc.
Type
A1
A11
A2
A3
B2
B12
C
D
E
F
S25
0.95
1.06
0.71
-
1.10
1.65
1.97
Ø 0.16
Ø 0.12
118
S26
1.97
2.13
1.26
0.35
1.97
2.60
2.41
Ø 0.16
Ø 0.16
118
S27
2.95
3.11
1.97
0.59
2.95
3.58
2.41
Ø 0.16
Ø 0.16
118
S28
3.94
4.13
2.83
0.79
3.94
4.80
3.28
Ø 0.24
Ø 0.20
118
S29
4.92
5.12
3.54
0.98
4.92
5.79
3.28
Ø 0.24
Ø 0.20
118
All measurements in Inches. 1A 2B
Bends, curves, tees, and crosses are easily made by cutting out portions of tray steel wires (pgs. 12, 13 & 15 in Standard Open Tray Brochure; pgs. 4, 7 & 8 in Image Brochure). SILTEC Open Trays are also engineered for easy and inexpensive side mounting using Mounting Bracket S45 or Mount S14.
+ A1 + / - 0.06 Inches + B1 + / - 0.08 Inches
DATA SHEET 1 : 4 OPEN CABLE TRAYS SILTEC’s cable trays type S30, S35, S36, S37, S38 and S39 are traditional open trays with low sides. Trays S30 and S35 may be side mounted. Trays S36, S37, S38 and S39 are mounted on angle con-soles or similar.
SILTEC Cable Trays are versatile and easy to work with. The open design allows for easily accessible utilities. Round material is used throughout wherefore trays are gentle on installed tubing and cable.
Type
A
A1
A2
B
B1*
C
D
E
F
G1
G2
G3
S30M
1.42
1.73
1.18
1.57
2.05
3.80
Ø 0.16
Ø 0.16
118
0.67
-
-
S30 Ø 0.16
1.77
2.09
1.18
2.44
3.07
3.80
Ø 0.16
Ø 0.16
118
1.18
-
-
S30 Ø 0.20
1.77
2.17
1.18
2.44
3.23
3.80
Ø 0.20
Ø 0.20
118
1.18
-
-
S35 Ø 0.20
2.00
2.40
1.18
3.94
4.69
3.80
Ø 0.20
Ø 0.20
118
2.36
-
-
S35W
2.00
2.40
1.18
5.87
6.65
3.80
Ø 0.20
Ø 0.20
118
2.36
-
-
S36
2.00
2.40
1.18
7.87
8.66
3.80
Ø 0.20
Ø 0.20
118
2.36
1.97
-
S37
2.00
2.40
1.18
11.81
12.60
3.80
Ø 0.20
Ø 0.20
118
2.36
1.97
1.97
S38
2.00
2.40/2.44
1.18
15.75
16.54/16.61
3.80
Ø 0.20/ Ø 0.24
Ø 0.20
118
2.36
2.95
2.95
S39
2.00
2.40
1.18
19.69
20.47
3.80
Ø 0.20
Ø 0.20
118
2.36
2.95
2.95
All measurements in Inches. 1A 2B
+ A1 + / - 0.06 Inches + B1 + / - 0.08 Inches
G4
1.97
DATA SHEET 1 : 7 OPEN C-PROFILE CABLE TRAYS SILTEC Open Cable Trays S30M-X, S30-X, S35-X and S36-X with C-Profile, have sides that are bent in at the top. With their slightly closed design, these trays prevent cables from sliding out, making them a suitable alternative to Locking Trays S20 - S123. Steel wire diameters are 4 and 5 mm (0.15" - 0.2"). Mounting is normally done with Weld Brackets S52 & S63, or Screwed Angle Brackets S65 - S68, Shelf Brackets S279 - S280 and Mounting Brackets S153 S154, S45, S45M, S145M, S80 - S81 & S180 - S181 with bendable tongues. Mounting can also be done on existing structures using Splice Plates S40B and S41B, Pipe Mounts S160 - S164 and aforementioned screwed mounting brackets.
SILTEC cable trays are versatile and easy to work with. The open design allows for easily accessible utilities. Round material is used throughout wherefore trays are gentle on installed tubing and cable. SILTEC Open C-Profile Cable Trays are used predominantly in: • Food industries • Sweet food, pastry & candy industries • Chemical and pharmaceutical industries • Dairies • Bottling plants • Breweries
Type
A1
A11
A2
B2
B12
B2
B3
C
D
F
G1
G2
G3
S30M-X
2.00
2.59
1.26
2.20
2.76
1.38
0.63
3.80
0.16
118
1.18
-
-
S30-X
2.76
3.35/3.50
1.57
2.68
3.39
1.38
0.63
3.80
0.16
118
1.18
-
-
S35-X
2.76
3.35/3.50
1.57
4.49
5.00
2.56
0.63
3.80
0.16
118
2.36
-
-
S36-X
2.87
3.66
1.57
8.15
8.94
7.09
0.63
3.80
0.20
118
2.36
1.97
-
All measurements in Inches. 1A 2B
+ A1 + / - 0.06 Inches + B1 + / - 0.08 Inches