Skip to main content

Breeder Signals, no watermark

Page 167

BREEDER SIGNALS A PRACTICAL GUIDE TO OPTIMAL MANAGEMENT OF BROILER BREEDERS


Credits Breeder Signals

Photography Main photographer: Marcel Berendsen

Publisher Roodbont Publishers B.V. Main authors Rick van Emous, Jolanda Holleman (Windkracht 10), Ton van Schie Editorial team John Lemmens, Rienk van Oosten, Henk Rodenboog, André Steentjes Final editing Christel Lubbers, Dustin Banks, Textcase With special thanks to Laurence Avonds, dhr. G. van den Berg, Paul van Boekholt, fam. S. van den Borne, John Caeyers, Christophe Cazaban, Tim Engelen, Guillermo Gonzalez, fam. C. de Haas, Bernard van Harn, Marcel Kuijpers, Jean Leorat, Bertrand Le-Tallec, Gerrit van der Linde, Fernando Lozano, fam. E. Meijerink, Frank van Merle, Koos van Middelkoop, Stijn Peters, fam. J. van de Riet, fam. H. Salomons, Jaime Sarabia, Wouter Steenhuisen, Otto van Tuijl, fam. D. Wenker and the following companies: Aviagen Technical and Marketing Teams, Vermeerderingsbedrijf Engelen, Opfokbedrijf Engelen and Veterinair Centrum Someren Design Studio Hiddink Illustrations Trudy Michels, Jolanda Hiddink, Dick Rietveld, Marinette Hoogendoorn

Roodbont Publishers B.V. P.O. Box 4103 7200 BC Zutphen The Netherlands T +31 575 54 56 88 E info@roodbont.com I www.roodbont.com

Wageningen Livestock Research P.O. Box 338 6700 AH Wageningen The Netherlands T +31 317 48 39 53 I www.livestockresearch.nl

© Roodbont Publishers B.V., 2020 (second edition) ISBN 978-90-8740-332-4 Breeder Signals is an edition in the Poultry Signals© series. No part of this publication may be reproduced and/or published in print, photocopy or any other means whatsoever without the prior written permission of the publisher. Authors and the publisher have composed the contents of this publication with great care and to the best of their knowledge. However, the authors and the publisher shall accept no liability due to damage of any nature whatsoever, resulting from actions and/or decisions based on the information provided. The publisher has tried to trace the copyright holders of all the image material. When a source has remained unmentioned, holders of rights may contact the publisher.

Additional credits: ASG (45, 95, 134); Aviagen (62, 73, 82, 86, 120, 121, 155, 158); Big Dutchman (67, 68, 117); Bigstock (164, 76); Ceva (166, 167, 168, 169, 171); Dreamstime, Tenrook (23); Dreamstime, Zdenek Sasek (150); Edward Mailyan (20, 21, 29, 56, 60, 65, 86, 106, 116, 118, 119, 120, 134, 139, 150, 168, 172, 179, 182, 183, 186); Frank van Merle (11, 16, 40, 42, 48, 51, 53, 61, 65, 71, 76, 77, 78, 81, 82, 83, 84, 85, 90, 94, 97, 101, 103, 107, 113, 118, 120, 121, 124, 128, 133, 137 141); Floor van Schie (47, ); GD (174, 175, 176, 177, 178, 179, 180, 184); Heering (40, 161, 162); Helmich van Rees (182); Henk Hut (19); Henk Rodenboog (46, 62, 113, 137, 141, 151, 186); Jan Dasselaar (166); Jan van Esch (132, 151); Koos van Middelkoop (31); Kris van Daele (129); Leon van Horne (22, 103, 111, 128, 139); MSD (175, 176); Novatech (30, 31, 32); Pas Reform (156, 157); Paul van der Ven (31); Piet Faber (27); Rick van Emous (60, 84, 94, 104, 116, 128); Rob van der Lee (64, 87, 99, 138, 169); Roxell (32, 34, 36, 54, 74, 75, 77, 78, 94); Stijn Peters (6, 12, 18, 19, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 48, 50, 51, 58, 70, 71, 72, 73, 135, 170, 172); Tim Engelen (6, 7, 18, 19, 25, 26, 27, 35, 36, 37, 42, 43, 49, 55, 61, 63, 70, 71, 72, 74, 79, 85, 86, 89, 90, 93, 97, 100, 110, 111, 112, 118, 125, 127, 148, 152, 153, 154, 155, 156, 161, 162, 163, 169, 172, 173, 183); Ton van Schie (22, 24, 45, 49, 69, 80, 85, 87, 132); TSS (160); Van Eck Bedrijfshygiëne (24, 27); Veterinair Centrum Someren (100, 112, 167, 171, 173, 174, 176, 177, 179, 181, 183, 184, 185, 186, 184); WLR/Gea Hogeveen photography (8, 14, 17, 18, 29, 45, 66, 69, 73, 75, 80, 81, 92, 94, 95, 96, 110, 119, 153); Wouter Steenhuisen (33, 34, 56, 67, 68, 97, 106, 111, 175, 180).

Sources The experience of many people mixed with expert knowledge and scientific papers are used to develop this publication. Graphs and tables are adapted from a variety of sources indicated below: Development of production results: Aviagen 2016 (8), Difference between broilers and breeders: Renema et al., 2007 (9), Influence of genetics and nutrition: Havenstein et al., 2003 (9), Production pyramid: Aviagen (9), Effect of unrestricted feeding; Heck et al., 2004 (11), Activity of breeders and broilers: Van Emous, unpublished data (11), Mating behaviour: Kruijt, 1964 (15), Aggressive behaviour: Kruijt, 1964 (16), Uniformity and production: Abbas et al., 2010 (28), Effect of beak treatment: De Jong et al., 2013 (31), Effect of perches: Appleby et al., 1988 (50), Effect of feed restrictions: De Beer and Coon, 2007 (52), Heat production and feeding schedules: Leeson and Summers, 2009 (53), Dietary protein and body composition: Van Emous et al., 2015 (57), Grading and uniformity: Aviagen, 2018 (58), Effect of stocking density: De Jong et al., 2011 (73), Separated and non-separated feeding: Stappers and Vahl, 1991 (76), Effect of start of stimulation: Van Emous, unpublished data (89), Effect of light stimulation: Robinson et al., 1996 (89), Male feeding systems and floor eggs: Aviagen, 2015 (99), Feed intake targets: Aviagen, 2017 (100), Egg production and feeding time: Aviagen, 2017 (101), Water consumption: Lemmens, unpublished data (102), Feed adjustments: Van Emous, unpublished data (105), Characteristics of feed: Aviagen, 2017 (106), Development of egg weight: Aviagen, 2018 (109), Feeding moment and heat stress: Aviagen, 2018 (114), Heat stress and production: Van Emous, unpublished data (115), Laying, hatchability and number of chicks: Aviagen, 2017 (117), Indicators for total production: Van Emous, 2018 (117), Dominance and mating results: Jones and Mench, 1990 (119), Fertilisation and leg length: Van Merle, 2008 (120), Individual male activity: Aviagen, unpublished data (124), Age-decreasing quality: Cobb, 2006/Duncan et al., 1990 (126), Mating pattern: Harris et al., 1980 (126), Failed/successful matings: De Jong et al., 2005 (127), Promiscuity of females: Aviagen (128), Observation frequency: Van Emous, 2006 (131), Protein and embryonic mortality: Van Emous et al., 2015 (136), Energy requirement: various sources (136), Protein and hatchability: Lopez and Leeson, 1995 (136), Spiking and male activity: Cobb/Casanovas, 2000 (138), Spiking and hatchability: Cobb/ Casanovas, 2000 (138), Male presence in a flock: Van Emous, unpublished data (138), Laying pattern and flock age: Zakeria et al., 2005 (140), Quality of eggs and flock ages: Aviagen, 2018 (140), Feather cover and feed requirements: Van Emous, 2010 (141), Hatching egg quality: Pas Reform (147) For the chapter Health and diseases some information is derived from Diseases of Poultry, 13th edition (Editor in Chief: David E. Swayne)

For more information please check www.breedersignals.com


Contents 1. Introduction The broiler meat production chain Signals concept Structured observations

4 5 6 7

2. The broiler breeder Great progress Breeding for meat or eggs Characteristics of lines Breeder dilemma Growth control Phase feeding Natural behaviour Mating behaviour Aggressive behaviour Ranking and pecking Sounds Importance of ventilation Negative pressure Biosecurity Entering a poultry farm Personal hygiene Vermin Cleaning and disinfection Dry cleaning Wet cleaning Disinfection

8 9 10 10 11 12 13 14 15 16 17 17 18 19 20 21 22 23 24 25 26 27

3. First weeks of rearing Sexing Treatments and interventions Feeding systems in rearing Drinking systems Preparation of the house The ideal temperature Transport to the rearing house Arrival of day-old-chicks Climatic requirements Chick distribution Humidity Poisonous gasses and dust Light in rearing Feed and water during rearing Checklist crop filling

28 29 30 33 36 38 39 40 41 43 44 45 46 47 48 49

4. Rearing from 3 to 17 weeks Controlled feeding Monitoring weight A feed-less day Reducing feed restriction stress Feeding management Water restriction Body development Uniformity Grading Feathering and feeding Sexing errors Recognising the sexes Development of the female

50 52 53 53 54 55 56 57 58 59 60 61 62 63

5. Puberty (17-22 weeks) Types of production houses Transfer Loading reared birds Arrival in the new house Stocking density Feed around transfer Separate feeding Getting used to systems Drinking water Feather sucking and feather pecking Synchronous development Maturity of males Separate male house Ratio of males to females Maturity of females Pin (pelvic) bones spacing Light programme Do not stimulate too soon Natural light Light intensity and floor eggs

66 66 69 70 71 72 73 74 77 79 80 81 82 83 84 86 87 88 89 90 91

6. Onset of lay (up to 5% production) 92 Laying nests 93 Egg laying behaviour 95 Development of the reproductive tract 95 Floor eggs 96 Preventing floor eggs 98 Night-layers 99 Male feed during production period 100 Feeding time 101 Capacity of the feed/water system 102 Growth and condition 103 7. Production towards peak Eating behaviour Feeding management Feeding early lay Monitoring behaviour Signals of feed intake time Signals of feeding errors Monitoring the flock Drinking water Heat stress Cooling in the house Signals from the laying curve Male grading Male-female interaction Influencing mating behaviour Sperm quality Moment of mating Deviating mating behaviour? Male aggression Artificial insemination Quality Time House

104 105 106 106 107 109 110 111 112 114 116 117 118 124 125 126 126 127 128 129 129

8. Peak production to end of lay Attention points in the house Clean laying nests Maintaining litter quality Feeding after the peak Adjust according to circumstances Protein in the feed Condition/conformation of males Spiking and intra-spiking Male persistency Signals from egg weight Feathering at end of lay Moulting End of lay

130 131 132 133 135 136 136 137 138 139 140 141 142 143

9. Egg handling and storage Not suitable as a hatching egg Hairline cracks Large and small eggs Shell quality Drying and cooling Cooling and nest type Egg collection Egg grading Packing eggs Cool down after collection Point setting Storage Humidity Washing eggs Washing procedures Candling and breakout On-farm transport Transport of hatching eggs Preventing cracks and breakage Climatic conditions

144 146 147 148 149 150 150 151 152 153 154 154 155 156 157 158 159 160 160 162 163

10. Health and diseases A healthy chicken Vaccination Efficacy of vaccination Vaccination at the hatchery Vaccination during rearing Other vaccination methods during rearing Disease symptoms Viral diseases Bacterial diseases External parasites Internal parasites Non-infectious diseases

164 165 166 167 168 169 170 172 174 178 182 183 186

Index

187


CHAPTER 1:

Introduction

The aim of a broiler breeder farm is to produce as many hatching eggs as possible. These eggs are meant to produce first-class healthy broilers with good growth, low feed conversion and a predictable slaughter yield. In order to get such a broiler you need to have first-class parent stock.

If no artificial insemination method is applied, the males and females are housed intermingled during the production period. That is quite a challenge. The challenge is to feed and manage the males and females according to their own requirements as these birds have different needs and characteristics. Managing this is essential if you want good mating results; remember, the production of healthy, good quality fertile eggs is the final goal. It depends very much on which country/ system you produce for, because the requirements of hatcheries or integrations differ. In this book the focus is on natural mating (not AI-systems), and rather large-scale operations with a controlled environment.

4

Males and females

šş

Cockerels, roosters, cocks; a lot of terms can indicate the male chicken. In this book we mainly use the neutral term ‘males’. We also generally refer to the hens as ‘females’.

B re e d e r S i gnal s


The broiler meat production chain The broiler breeder farm is an important link in broiler meat production. Broiler breeder production, whether owned by an integrated enterprise or by individual farmers/companies, can be divided into rearing flocks (up to approx. 18-20 weeks) and production flocks (18/20-60/65 weeks). This system is used in many European countries and North America. In other regions, birds are often kept in one location from day-old to death. There are hardly any specialised rearing farms in this situation. The advantage is that there is no transport over long distances, there are no differences in feeding or drinking systems and therefore the performance can be better. On the other hand, the costs of housing young birds are relatively high: many small chicks in a large house. The system chosen is often related to labour costs and investment costs for land, buildings and equipment. The more expensive the poultry

1. In tro d u c t i o n

houses, equipment and labour, the more often the decision will be made to separate rearing and production. The whole broiler meat chain consists roughly of the following parts: • Primary breeding companies - Selection of broiler breeds (pure lines) and production of great-grandparents, grandparents and parent stock. • Broiler breeder farms - The production of hatching eggs from parent stock. - Rearing farms (pullets) - Production farms (broiler breeders) • Hatcheries - The hatching of fertile eggs into day-old chicks. • Broiler farms - Rearing day-old chicks into broilers. • Processing - Slaughtering the broilers and processing the poultry meat. • Retail - Marketing meat and meat products.

5


Signals concept

Use all your senses

look

listen

smell

feel

taste

touch

This book is not a handbook in which all the facts can be found, but rather a practical reference book with things that a poultry farmer encounters on a daily basis and on which you can take immediate action. In this book we use the signal concept and always ask the same questions: 1. W What do I see (hear, feel, smell, taste)? What’s th the signal? 2. Ho How did this happen? What’s the explanation? 3. W What am I supposed to do? Is it okay or should I ttake action? And, llast but not least, it is important to determine what effect you can expect to have on the behav behaviour of the birds and thus to evaluate it. If you always look at your business processes in this w way, you can make rapid progress. A real signal is repeated. Therefore, try to make the link to the circumstances at your farm. Does it happe happen often? At other times? With other birds? Ask an expert if necessary and compare with other farms farms. If you only look at technical indicators (daily growt growth, feed and water use, floor eggs, etc.), you ccan ca nm miss important signals from your birds and their eenvironment. So, always use all your senses. For ex example, even before you are in the poultry house house, you can listen to the sound of the birds and notice if there is anything special about it. In addition to your daily routine, you can also do a checkup round without doing anything else. This allows you to pick up signals better and more consciously. Once you know what’s normal, you will be able to recognise abnormalities. You learn what normal behaviour is by looking at it as often and as objectively as possible. Prevent operational blindness.

š š š

ş 1 day 6

ş 3 weeks

ş 10 weeks

20 weeks B re e d e r S i gnal s


Structured observations

L LOOK-THINK-ACT

This is how you observe in a structured way: 1. Look, also when you are not doing other work. 2. Look at the whole flock, at the individual birds and again at the flock. 3. Look at averages and extremes. 4. Look at the front, the middle, and the end of the poultry house. 5. Look at different times of the day and in different circumstances. 6. Stop at regular intervals, stand still, and go down to bird level. 7. Identify risk moments, risk birds, and risk places and keep a close eye on them. 8. Pay particular attention to feed, water, laying nests, and ventilation systems. Look from flock to individual The whole flock: • How is the distribution in the house? • Do the birds avoid certain places? • Are there differences between the birds (body weight, colour, etc.)? • Whistle or clap your hands to assess the reaction. • What noise do you hear, quiet or excited?

What causes swelling on the head? For some reason, an air sac in the respiratory system ruptured, resulting in the air moving to other places under the skin. You can separate the bird, carefully puncture the skin with a needle and push the air out. If the bird is well developed, there is nothing wrong with keeping it in the flock.

Individual birds: • Randomly catch 10 females and 5 males. • Look at the legs, the comb, the cloaca, etc. • Feel the chest, legs, crop, etc. • Listen.

š

š š

ş 25 weeks 1. In tro d u c t i o n

ş 30 weeks

ş 60 weeks 7


CHAPTER 2:

The broiler breeder

In order to be able to manage broiler breeders properly, you first must understand them, in terms of behaviour, physiological and physical characteristics and needs. The selection of the male line is mostly based on broiler characteristics. Therefore, managing the males is more difficult than managing the females. And when the hens are not managed properly, it immediately shows in lower egg production.

Development of production results Chicks (#/hen at 60 weeks)

150 top 25%

145 140

average production

135 130 125

bottom 25%

120 115 110 105 2004

2006

2008

2010 2012 Year

2014

2016

2018

2020

The difference between the worst-performing and best-performing breeder farms is striking. This difference is due to management. For many breeder farms this means that there is still profit to be made. An improvement of 10 chicks per breeder hen on a farm with 20,000 broiler breeders and a hatching egg price of €0.20 means: €40,000 increase in profit per cycle!

8

The conventional broiler breeds are mainly derived from two types of birds: The males are mainly descended from the White Cornish, which was bred in Cornwall from Indian game breeds. The female lines are mainly descended from the White Plymouth Rock, originally developed in America. Today’s broilers grow five times faster than in 1960 and that is largely due to selection. In the 1950s, the selection was mainly based on growth, but the breeding goals have become much more varied over time. There are now two large primary breeding organisations that dominate the world market, whereas there used to be 1,000. It has therefore become a highly-specialised and concentrated branch of the industry.

B re e d e r S i gnal s


pedigree selection

Great progress The number of chicks per hen housed is increasing every year. They’re getting more and more efficient. In 1990, one female breeder produced an average of 115 broiler chicks, and in 2020 this has increased to 140 chicks. From pure line (pedigree) to broiler production it takes about 5 years, with 10 pure line females and 1 male eventually producing 50 million broilers (75,000 metric tonnes of meat). It is also obvious to see how many bad broilers you would get from one bad grandparent hen, or if you would leave one wrongly sexed male in a broiler breeder flock. These ‘details’ can have a huge influence. One breeder male that was not removed from the female line may mate with 10 females, producing 1,400 suboptimal broilers. Because the development of a new pure line also takes at least 5 years, the breeding company must anticipate the market requirements 10-15 years ahead.

1x10 genetic improvement

year 1

150 GGPs

great grandparent

year 2

7500 GPs

grandparentstock

year 3

400,000 PS

broiler breeders/parent stock

year 4

50,000,000 broilers

broilers

year 5

processing 75,000 tons of meat

consumers

The breeding pyramid. A small number of broiler breeders provide an enormous amount of broilers.

Not all genetics Not everything is due to genetics. Other factors at breeder level can affect broiler quality. The age of breeders has an impact on the size and quality of the hatching eggs and chicks. Mortality in the first week generally can be higher in broilers from young and old parents. Stress or disease during the laying period can also affect broiler chick quality and its technical results.

Relatively few broiler breeders are responsible for a lot of broilers and therefore each has a very high impact. For example, 10 parent stock females and 1 male together produce about 1,400 chicks, providing 2.100 kg of meat.

Influence of genetics and nutrition

Increasing difference in body weight between breeders and broilers at 6 weeks of age

6,000

breed 2001+ diet 2001

3,000 5,000 2,500 2,000 x 3.6 1,500 1,000

x 1.9 breeders

500

Body weight (g)

Body weight (g)

broilers 4,000 breed 2001+ diet 1957 3,000 2,000

breed 1957 + diet 2001

1,000

breed 1957 + diet 1957

0

0 1980

1990

2000 Year

2010

2020

The gap between the target weight of the broiler and that of the broiler breeders is becoming larger. The bigger this gap, the harder it is to manage broiler breeders at low feed intake, since they share the genetic potential for growth with their offspring. This has a major impact on their reproductive characteristics, such as peak production, persistency and hatchability.

21

42

56 Age (days)

70

84

Feed and management have improved tremendously. But even if you gave a modern broiler the diet from 60 years ago, its growth would be much faster than the breeds of that era. Therefore, 85-90% of the progress in broiler chickens can be attributed to breeding and selection and only 10-15% to feed and management. 9


Weight Profile Feathering Chick quality Hatchability Persistency Fertility Egg quality Egg weight Rate of lay Age first egg Robustness Health Welfare Growth FCR Yields Meat quality etc. etc.

Around 1960, maximising growth (production) was the primary selection criterion for broilers. At that time all broilers were sold as whole chickens. Cutting up and further processing called for another type of broiler. Nowadays more than 40 characteristics are determined for selection, including feed efficiency, in addition to welfare and overall health of the birds. In 2025, growth as such will be even less important, but focus will continue to be placed on traits such as sustainability, robustness, yields and meat quality traits.

Breeding for meat or eggs From a breeding point of view, the selection for one trait usually has consequences for other traits as well. This is also the case with selection for growth and reproduction. In parent stock both characteristics are important, but if you want to improve the characteristics of broilers, then reproduction can be negatively affected. Primary breeding companies need to focus on the right balance between breeder and broiler characteristics. However, the cost of a day-old chick is only a fraction of the cost of a fully-grown broiler. A 10% improvement in broiler characteristics is therefore worth much more money than a 10% improvement in parent stock characteristics. After all, the ultimate objective is the production of broiler meat.

Characteristics of lines Female line

Male line

All genetic changes have an impact on which management strategies can be applied. Broilers are the final product of crossing different pure lines with different characteristics. Specific broiler characteristics mainly result from the males. Due to the significant difference in selection of male lines compared to female lines, these males have to be managed differently in rearing and during production. In breeding and selection of the female lines more attention is paid to reproductive characteristics than to broiler characteristics.

Broiler breeder Female and male lines are selected for different traits (reproduction versus broiler characteristics) to get optimal results on parent stock and broiler level. The greatgrandparents are purebred. The grandparents are crossed to produce the parents and the commercial broilers are a four-way cross, making use of the heterosis effect between the different genetic lines used.

Layer

Broiler

Dwarf breeders In broiler breeds, sometimes dwarf females are used. The dwarf factor is genetic and a recessive gene. The main reason for using dwarf hens is that they require a lot less maintenance feed and are therefore cheaper (about 20% less feed), and currently the majority of the slow(er) growing breeder females are a dwarf-type. Dwarf females require little or no feed restriction, which is benficial from an animal welfare point of view. The dwarf females are mated with ‘normal’ males. The recessive dwarf factor does not express itself in the final broiler offspring.

10

A broiler breeder is a hen with high growth potential which also has to produce quite a number of good hatching eggs. A challenging combination. The more selection has been focused on broiler characteristics the more challenging it is to manage the flock.

B re e d e r S i gnal s


Breeder dilemma

Selection for growth and feed efficiency

Broiler meat production requires good health, welfare, and efficient growth characteristics of the broilers. At the same time, the goal of a breeder flock is to collect as many fertile hatching eggs as possible. These are two things that are not easy to combine – either in the breeding process or in daily management. If you let the parent stock grow like a broiler, the breeders will become too heavy. As a result mortality, egg production and fertility will become a problem. In order to limit growth, the birds are fed in a controlled manner and often only in the morning, with much lower energy and protein content in the feed than for broilers. This requires good management, because the difference between the urge of the chicken to eat a lot and what the chicken is allowed to take in can lead to competition for feed between the birds. This competition can lead to reduced uniformity. However, some competition is required. If there is too much feeding space, the fast eaters will be able to consume too much feed, also reducing uniformity. The poultry farmer has to deal with this dilemma and find the balance between preventing fattening of the birds, but maintaining reproduction characteristics, especially during the rearing period when the birds are fed well below satiation.

High feed intake capacity

restricted feeding

optimal reproduction and health

stereotypic object pecking experiencing hunger?

reduced welfare

unrestricted feeding

poor laying performance overweight, poor fertility lameness, premature death high mortality

reduced welfare

The management of conventional broiler breeders is to a large extent about finding a balance between restricting growth during rearing and optimal hatching egg production. With as little harm as possible to the welfare of the birds.

Fast, moderate or slow(er) growing

Effect of unrestricted feeding on performance KPI BW at 24 weeks (kg)

Controlled

Ad lib.

2.20

5.40

167.00

184.00

Lay (%)

79.10

52.40

Egg weight (g)

63.70

63.70

Egg mass (g/d)

50.30

33.50

Feed intake (g/h/d)

FCR (kg feed/kg egg)

3.33

5.80

Mortality (%)

6.10

31.10

This study showed that if you practice unrestricted feeding in fast growing breeds, mortality would go up from 6% to 31%. This is not valid for so-called dwarf female breeders.

2. The b ro i l e r b re e d e r

The majority of broiler breeders worldwide are so-called ‘conventional’ parents of fast-growing broilers, which can reach a body weight of 2.5 kg in 40 days or less. Worldwide, only a small proportion of broiler breeders are intended for slow(er) growing broilers. In Europe this is around 5% of the total flocks. During recent years in Europe and the US an increase in demand for chickens with a lower growth rate (between 45 to 50 g/d average daily gain) can be noticed, mainly pushed by ngo’s. For this market mainly the Hubbard Premium or the Rowan Range females and males are being used. For the more traditional and organic markets even slower growing chicken breeds are used (27.5 to 40 g/d ADG).

11


Broiler breeder

Growth control

Layer

Broiler

While layers and broilers can always be satiated due to an almost unlimited supply of feed, the conventional broiler breeder receives a restricted amount of feed during her entire life for better welfare and optimum production.

Activity of breeders and broilers 90

Total

Time (% observations)

80

broiler breeder

70 60 50 40 30 20 10

e

e

tiv Ac

g

tiv

In

ac

in

g

ck pe

rd Bi

Lit

te

rp

ec

gi

kin

ng

rt fo

ra Fo

m Co

al

kin

g

ng W

ng

tti Si

g

di

kin

an St

in Dr

Fe

ed

in

g

0

Activity Broiler breeders are more active than broilers. If broilers don’t eat or drink, they rest on the litter. You must give breeders something to do so that they don’t develop abnormal behaviours stereotypic (pecking).

During the rearing period, the feed intake is controlled by up to approximately 30% of the total feed intake capacity. During the laying period feed control is 50-90% of the total feed intake capacity. The most severe feed restriction is between roughly 7 and 16 weeks of age. The original reason for this was to postpone maturity. With unrestricted feeding the males would be mature at 14 weeks, but would die too soon. Even with a controlled feeding schedule you can easily over-feed the birds due to competition between individual birds. Too much feed causes fat birds, too much restriction inhibits development. That is why regular monitoring of body weights and uniformity is very important, especially during the rearing period. Follow the breeding organisation’s guidelines. Spare time In the wild, chickens forage for more than half the day. In comparison, the female breeder pullets consume their feed in less than one hour from about five weeks of age. During the laying period they eat the entire allotment of feed (165 to 170 grams) in three to four hours. Dwarf females need more time to consume their feed. Water supply is often cut off two hours after the feed is finished to avoid overconsumption of water or spilling. So broiler breeders have a lot of spare time. Especially from six weeks of age onwards, this can lead to abnormal behaviour. Some farmers do not turn off the water supply. If the birds know they have sufficient time to drink, they’ll be more comfortable. If they are going to play with the water or overdrink, you can still turn off the water. This is another good reason to keep a close eye on behaviour, litter quality and the water/feed ratio. Too little water is as bad as too much. A water/feed ratio higher than 2.0 is normal. If you provide feed later in the day you should not give water in advance.

Two feed silos makes mixing possible. The box on the left contains a weighing scale to dose the feeds correctly. The silos are clearly numbered 2A and 2B in order to prevent errors during filling.

12

B re e d e r S i gnal s


Phase feeding Nutritional requirements change with age, not only in quantity, but even more so in composition; that is why phase feeding is used. This is even more crucial in breeders than in laying hens because of the risk of fattening and excessive growth. In many countries, three types of feed are used during rearing, with energy content generally remaining the same. If the hens are stimulated by day length before 23 weeks of age, it may be better to provide four types of feed during rearing in order to prepare them more quickly for production. In that case, in addition to protein levels, a

difference in energy levels is applied (grower feed is often much lower in energy). The underlying choice is often based on bird welfare; by restricting the energy content you can allow the bird to eat more, giving them a longer eating time. In addition to the needs of the birds, there is also an influence of the availability of raw materials in various regions. For example, chickens are fed relatively more wheat in Europe and more maize in the US, and the variation in protein sources in Europe is also greater. This is taken into account in the feeding strategies.

Examples of phase feeding programmes Type of feed

Characteristics

When

Purpose

For 3 types of feed during rearing 1. Starter feed

Ground crumb.

Day 0 to day 28

Early growth and physical development.

2. Grower feed

Less crude protein and less amino acids (amino acid pattern is very important). Optimal quality.

From day 28

Controlled increase in body weight.

3. Pre-lay feed

Energy to protein ratio is increased to encourage the bird to store energy as fat as energy reserve for the onset of lay. Calcium level is increased to prepare for lay.

From week 17 until start lay (approx. 5% egg production)

Good development of the reproductive organs.

For 4 types of feed during rearing 1. Starter feed 1

Concentrated feed.

0-2/3 weeks

Supports good early development, especially for males.

2. Starter feed 2

Lower energy content

3-7/8 weeks

Smoother transition to a less concentrated growth feed.

3. Grower feed

Less concentrated grower feed.

7/8-17 weeks

Gain more control over body weight development and increase feed intake.

4. Pre-lay feed

Energy to protein ratio is increased to encourage the bird to store energy as fat as energy reserve for the onset of lay. Calcium level is increased to prepare for lay.

From week 17 until start lay (approx. 5% egg production)

Good development of the reproductive organs.

For 3 types of feed during production Breeder 1

Calcium level is 2.5 times higher than pre-lay for 5% lay-35 weeks good shell quality. Higher in energy and protein (amino acids) for good production. Higher linoleic acid and TSAA for higher initial egg weight.

Apart from development and maintenance, production requires energy. High egg weight is important due to the threshold for hatching eggs (50 or 52 grams).

Breeder 2

Slightly lower protein and lower linoleic acid level 35-50 weeks and higher calcium.

Maintaining production without too much muscle development.

Breeder 3

High in calcium, low in protein.

Maintaining shell quality with decreasing egg production.

Day 1

50-60 weeks

Day 2

Day 3

100%

0%

75%

25%

Feed A

Feed B

Feed A

Feed B

Day 4

50%

50%

Feed A

Feed B

Day 5

25%

75%

0%

100%

Feed A

Feed B

Feed A

Feed B

Switch between different feeds gradually by mixing the feeds for at least five days, with the ratio gradually shifting. This allows the intestine and intestinal flora to adapt better to the changes.

2. The b ro i l e r b re e d e r

13


Natural behaviour

Scratching in the litter is part of foraging behaviour. In a poultry house you can make use of this behaviour to keep the litter dry and loose. It can be encouraged by scattering grains.

Chickens use dust baths to remove the old fat from their feathers and thus any parasites.

Knowledge of natural behaviour is important to enable you to manage broiler breeders well. Males and females are reared separately, but after the rearing period, males and females must be kept together to get fertile eggs. This is a challenge because they both require different types of feed and management. In addition, there are many more types of behaviour (e.g. mating) to pay attention to than in a broiler or layer house. Behaviour is largely genetically determined. Some things are instinctual and can’t be bred out.

Preening is important to keep feathers in good condition. Birds apply preen gland oil to the feathers and remove parasites and foreign objects.

Daily routine Morning

Noon

Afternoon

Evening

Preening P

Mating Ma

Roosting

Feed Feeding

Feeding Feed

Egg laying

D Dust bathing

Chickens synchronise their behaviour. ehaviour. They fo form orm g groups to protect themsel themselves from attacks. Patterns can also be observed during the day. Align the management (feeding, lighting, activities in the poultry house) accordingly. Be aware that this pattern is different at different phases in the chicken’s life cycle. 14

B re e d e r S i gnal s


Mating behaviour In ‘normal’ situations most mating takes place about two hours before sunset. This is logical, since it has to be done after the laying of an egg and before a new one blocks the oviduct. In the wild, the female approaches the male. The male will attempt to mate all the time, but the female has to allow him to by crouching in front of him. Natural mating behaviour always follows a fixed pattern. Courtship behaviour will make the mating process easier. If you know and recognise this behaviour, you can also use it to improve fertility results. Successful mating requires space, the process works better at 5 birds/m2 than for 8 birds/m2.

Stages in mating behaviour 1

2

3

Did you know that? • • • • •

A male mates about 10-15 times a day, 40% of which are successful. Not all males do that, quite a number don’t mate or not successfully. For a female, mating once a week is sufficient for good hatchability results. Male/female ratio must be approx. 9% at the start of laying. In most houses ‘over mating’ is an issue with negative effects on female willingness to mate at progressing age.

Normally, mating takes place in the litter (top). In litter systems, 90% of mating takes place on the litter. In the case of houses with full slats a slight decrease in fertility can be observed. 2. The b ro i l e r b re e d e r

The male closes with the female, displaying waltzing, tidbitting, high-step advance, feather ruffling, crowing, wing movements. 4

5

If the female wants to allow mating, she will spontaneously take a crouching position.

The male approaches the female from behind and stands on the back of the female.

6

7

This is usually accompanied by the male taking the feathers on the back of the female’s head or neck in his beak.

The male moves his tail down and to the side (the female moves her tail up and to the side) so that their cloacae can make contact.

15


Aggressive behaviour

The litter is normally the territory of the males. If there is less litter area in a house, you should therefore use fewer males. Otherwise there will be too much competition between them, and that will be at the expense of fertility results.

Since there is social behaviour in a flock with males and females, there will also be some aggressive behaviour, especially between males that might consider other males intruders in their territory. When a fight starts, two birds stand face to face, opposite each other, in a threatening position. The neck is stretched, in males usually horizontally and in females more vertically. The feathers of the neck are completely erect. The fighting starts with leaping toward the opponent, pushing off both legs simultaneously, accompanied by wing-flapping. During leaping, the legs are thrown forward, kicking the opponent with a rapid ruffle of both feet. The legs move alternately and with high frequency and amplitude during kicking. Vigorous pecking at the opponent is another element, often to the head.

Stages in aggressive behaviour 1

2

Hopping and threatening

Frontal threatening with neck feathers erect 3

4

Leaping 5

6

Kicking 16

Wing flapping

Aggressive pecking B re e d e r S i gnal s


Ranking and pecking There is a hierarchy between chickens known as a ‘pecking order’. The birds recognise each other by the head (colour, size and shape of the comb). In very large flocks there is little aggression, because the chickens can no longer recognise each other when there are more than 50 birds walking around. The rule becomes very simple: the largest chicken with the largest comb is dominant. Feather pecking is not very common in broiler breeders. Do not confuse pecking with what is known as feather sucking.

Social hierarchy is shown by dominant and submissive interactions. The bird on the left shows an aggressive attitude full of self-confidence, while the bird on the right shows submissive behaviour. This isn’t directly sex-linked. A bad male can sometimes be submissive to a dominant female.

Sounds Chickens have an extensive repertoire of 20 types of sounds, for example for warning, contact, threat, submission, feed call, or pain. The males have a territorial defence call and can crow over a long distance. The social dominance of a male is determined by the quality and quantity of this call. Normally, an alarm signal will always come from a male. In addition, the birds sometimes react by ‘freezing’ and pushing themselves flat to the ground. This may be due to a large bird flying through the poultry house. Chickens are also able to recognise silhouettes. This is because their bifocal vision gives them an upward view.

If feather pecking does occur, you can take the following measures: • red light, so that attractive red skin/blood is no longer visible (although this makes it more difficult to check the colour of the comb and wattles) • light dimming (risk: more floor eggs!) • distractions, e.g. in the form of a lucerne bale or pecking blocks • suppletion therapy via drinking water (liquid methionine, salt, etc.) • offer diversionary equipment, such as CDs or plastic bottles half filled with water

Music

In a breeder house you can hear a cacophony of sounds. Males crow and react to other males. This gives a picture of male activity and the social order. 2. The b ro i l e r b re e d e r

The birds get used to many different stimuli so that they are more resistant to stress and are less likely to be frightened. Think for example of music in the house or different colours of overalls. As a suggestion, place a ribbon above the inlet valve during the rearing period, so that the birds become accustomed to movement from above.

17


Effects of air quality on broiler parents

Importance of ventilation

Substance

Quality characteristics

Ammonia

• • • •

Ideal level < 10 ppm. > 10 ppm: damage to lung surface. > 20 ppm: increased susceptibility to respiratory diseases. > 25 ppm: reduced growth rate.

Carbon dioxide

• •

Ideal level < 3,000 ppm. > 3,500 ppm: ascites. Carbon dioxide is fatal at high levels.

Carbon monoxide

• •

Ideal level < 10 ppm. > 50 ppm: affects bird health. Carbon monoxide is fatal at low levels.

Dust

•

Should be as low as possible. Damages respiratory tract lining.

Relative humidity

• •

Ideal level: 50-60% after brooding. Effects vary with temperature.

In case of housed animals, ventilation and climate control is very important. This is essential for each phase of production, both rearing and laying. Always look closely at the behaviour of the birds to check whether the ventilation is being carried out correctly. Good ventilation ensures: • Healthy respiratory systems • Effective breathing • Good temperature regulation • Good litter quality • Good performance from the bird • Disease prevention As soon as you walk into the poultry house, ask yourself the following questions: • Do the birds sound happy? • How are the birds distributed in the poultry house? • Does it feel muggy? • Is the air quality acceptable? • Is the humidity too high or too low for young chicks? • Is it cold? How does the temperature and air movement feel? • Is there a draught?

Image from monitoring system with temperatures, air pressure and ventilation openings.

Humidity sensor at bird level. 18

CO2 sensor at bird level.

Have the climate system checked each year by an expert. Your system settings may change due to wear or unexplained deviations.

Temperature sensor at bird level. B re e d e r S i gnal s


Negative pressure Fans draw air from the poultry house, causing fresh outside air to enter the house evenly through the inlet openings. The greater the low-pressure area, the faster the air velocity of the incoming air. This only works efficiently if the house is properly sealed. This is very important in the case of minimum ventilation, because the influence of air leakage is relatively greater in the case of low air movement. With a smoke test you can see how the air spreads through the house. It is best to carry out a smoke test under the worst conditions: when the house is at rearing temperature and the ambient temperature low. Hold the smoke generator about 5-10 cm (2-4 inches) below and away from the inlet to produce sufficient smoke.

Place ribbons on the ceiling at a distance of 1-1.5 meters apart. This shows you the air movement, which should become less and less towards the top. This means that the air just reaches the middle of the house, and slowly moves down. These ribbons are also a stimulus for the birds to make them feel more at ease.

These ventilators can be closed off to better control the climate (no cold air entering, better negative pressure, better air distribution). In the absence of a smoke machine, your own perception is also very useful for observing air movement and draughts. Moisten your skin a little and you will quickly feel cold air currents in the house. Squat among the birds to experience the airflow there. Tossing some down feathers and watching them fall is another option.

force to open

air getting in, decreasing negative pressure You have to apply some force to open the door of the poultry house, which is a signal that there is underpressure in the house. Immediately after opening the negative pressure drops to zero. If too much force is required, the negative pressure may be too high. Check the inlet openings and fan operation. With a sliding door you can leave the door ajar and feel air flow direction and speed.

2. The b ro i l e r b re e d e r

19


Biosecurity It is especially important for biosecurity measures to be implemented and followed up rigorously on broiler breeder farms, not only to prevent diseases in the parent birds but also to prevent for problems in the progeny, e.g. vertically transmittable diseases. For grandparent stock, biosecurity measures are even tighter: the higher up in the breeding pyramid, the higher the hygienic standards. Especially in the first days and weeks, chicks are very susceptible to specific diseases. If infectious agents are present on the rearing farm when the chicks are delivered, or when the chicks are challenged by an early introduction in the first days or weeks of their lives, the immunity of the chicks is not yet well developed enough to prevent for infection. Specifically for Marek’s Disease and IB variant virus, the symptoms can sometimes not be recognised earlier than at the onset of lay!

All-in all-out An ‘all-in all-out’ policy with only one age group of birds is preferred. Every delivery to the farm or transport from the farm, especially with young chicks on a rearing farm, is a risk: it will cause a break in biosecurity! Doors have to be opened, persons and material are brought inside houses. Contact with ‘people from outside’ should be limited and all biosecurity measures should be followed by visitors. Preferably only the farm’s own equipment (for example vaccination equipment, weighing and grading instruments) should be used. Flocks that are transported should always be tested before transport to be sure that they are free from AI and ND (or: adequately protected against ND), M.g., M.s. and Salmonella. Dirty and clean road principle Practically this means a total separation of the outside (‘dirty’) space from the inside (‘clean’) space. There is always a possibility of introduction of infectious agents via an airborne route because houses must be ventilated properly. To prevent the introduction of contaminants via air, special filters are available for so called FAPP-ventilation: Filtered Air Positive Pressure.

The dirty route is used by trucks to unload the feed, or to load the hatching eggs.

feed silo Įůůing pipe DIRTY ZONE

BUFFER ZONE CLEAN ZONE poultry house

buīer zone access point parking

public road

external road

clean zone access point

dead bird storage

vehicle ĚŝƐŝŶĨĞĐƟŽŶ ďĂƚŚ

poultry house

hygienic lock fence around the ďĞƚǁĞĞŶ ͚ďƵīĞƌ͛ͲnjŽŶĞ ŽƉĞƌĂƟŽŶ ŝŶĚŝĐĂƚĞƐ ĂŶĚ ͚ĐůĞĂŶ͛ njŽŶĞ ƚŚĞ ͚ďƵīĞƌ͛ͲnjŽŶĞ

The farm is divided into a clean part (the houses) where the birds are kept and a dirty part with access to the outside world. The farms should be completely surrounded by a closed fence. 20

It is advisable to include a paved strip of at least one meter around the houses for rodent control. This strip hasn’t been cleaned recently and the grass is too high. B re e d e r S i gnal s


Entering a poultry farm Farms (houses) should not be located directly near to other poultry farms, especially not near farms with layers, broilers and turkeys (farms with ‘final products’). Not only because of airborne germs but also because of possible spread of diseases by vermin. Since outbreaks of AI are seen in the neighbourhood of ‘open water’ it is recommended to avoid any pools, ponds, rivers, or lakes in the neighbourhood of poultry houses, because of the attractiveness for waterfowl. Also, after rainfall no pools of water should remain on the pavement. At the entrance of the farm there should be a building containing at the very least clean coveralls and rubber boots which should be worn before entering the farm.

A minimum requirement to reduce pathogen transfer by any person entering the house (without showering) is: wearing a coverall, hair net, boot covers or rubber boots and preferably gloves and a mouth mask. It is advisable to record each visitor (defined as a person not working on site on a daily base): name, date, declaration of being ‘clean’ and healthy, reason and duration of the visit, signature, and preferably the location and time of the last visit to another poultry farm.

It is advisable to have a disinfection bath at the entrance of the farm where the truck has to drive through to disinfect the wheels. The truck for dead birds is a big risk: this truck should not pass the hygiene barrier: dead birds (stored in special containers) should be loaded outside the fence.

‘Shower in-shower out’ policy: all personal clothing and items must be stored on the external site of the shower. After showering every person entering the farm must wear clothing from the farm.

Dead birds are a potential source of infection. They should be removed from the house as soon as possible: collect dead birds at least 2 times per day. Store them (not too long) in well-closed containers, preferably refrigerated. After they are emptied, clean and disinfect (left) them so they are ready for use (right). 2. The b ro i l e r b re e d e r

21


Personal hygiene

Use separate equipment and clothing for each poultry house, to prevent the spread of infections.

Boots/shoes or boot covers should be changed before entering a house; for that reason also in front of each house (in the ‘ante-room’) there should be a separation between dirty (coming from outside) and clean (coming in contact with the birds inside the house) zone. Foot baths with disinfectants may be useful provided that the boots or boot covers are clean, the disinfectant is clean and at the correct concentration. As soon as the foot bath gets contaminated with dust, faeces, etcetera the effectiveness of disinfection will quickly be reduced. Equipment (like the basket and the gripper arm to collect floor eggs) should be separated per house. Equipment to repair defects of e.g. feeding system, drinking water system, lighting, etcetera should be clean and disinfected before taking it inside the house. Also the equipment that is delivered from the hatchery to collect hatching eggs on and in must be thoroughly cleaned and disinfected.

Using disposable latex or nitrile gloves is the best option, but hand washing and disinfection between houses is acceptable. Have basins with running water and soap next to each entrance.

When footwear per poultry house is used, a ‘step-over partition barrier’ should be set up at the entrance. When you pass this barrier you put on a new pair of shoes/boots or boot covers and the other way around on leaving the poultry house. On the bottom picture you even have an extra step: coming from outside, you put on temporary slippers before putting on clean boots.

22

Where water is not available, at least a hand sanitiser dispenser should be in place for use on entrance and exit to disinfect your hands every time you enter a new poultry house. B re e d e r S i gnal s


Vermin Besides people, wild birds pose an extremely potent risk to biosecurity. Where you have poultry, you have vermin; there is feed, places to hide and a suitable climate for multiplication. In addition to the risk they pose to your biosecurity programme, rodents can also cause direct damage to your poultry house and equipment! At minimum, every operation should have a written programme addressing the control methods for: wild birds, rodents, flies, lice, mites, fleas and darkling beetles. Records should be kept of procedures and chemicals used. Sufficient down-time is ideal for eliminating vermin: bait becomes more attractive when feed is scarce, there are fewer places for the vermin to hide, and the risk of birds being inadvertently contaminated with pesticides is small.

A good pest control has three elements: 1. Prevention: make the house inaccessible or less attractive to vermin. 2. Monitoring: look for signs of vermin such as traces of feeding, droppings, foot-prints. 3. Eradication: use pesticides to stop them from multiplying. It has to be executed by professionals.

Pest control The purpose of ‘clean’ insect-control (in between flocks) is to prevent the return of the insects, which managed to escape or survive the ‘dirty’ eradication (during production), from their shelters to the clean and warmed up house with the fresh feed in the feeders. DO NOT apply insecticides together with the disinfectants. Properly dry the house before applying the insecticide.

Flies • • •

Risk: spread pathogens such as Campylobacter and Salmonella. Prevention: fly screens on air inlets and outlets, remove waste quickly, remove manure from the farm. Control: long-acting insecticide at point of contact, or an insect killer lamp (the UV light attracts flies which are electrocuted by the electric wire grids).

Darkling beetle • • •

Risk: spreads pathogens, damages insulation. Prevention: use insulation with a solid top layer, smooth profile on house wall, remove manure from farm. Control: insecticide during down-time, but a smooth metal strip or metal sheet against the wall can also be effective in preventing further spread. Important to use insecticides on the walls just before taking the birds out and heating up the house before placing the new flock (before the house cools down and warms up again).

Rodents •

•

•

2. The b ro i l e r b re e d e r

Risk: spread disease organisms such as Salmonella or AI, damage to infrastructure e.g. short circuiting caused by gnawing through electricity cables, loss of feed. Prevention: clean up waste or feed sources around the poultry house, maintaining a clear-cut buffer zone around the house, properly closing doors and narrow ventilation openings. Control: bait traps, e.g. containing anticoagulants. However, many rats are resistant to this.

23


Cleaning and disinfection During production In addition to the cleaning/disinfection procedures after emptying the houses, cleaning, disinfection and biosecurity in general should always have your attention. • The buffer zone should be cleaned when necessary, but at least twice a year. • Don’t store cleaning materials in or around the houses before cleaning takes place. • Do not take materials into the clean area of the farm without first thoroughly cleaning and disinfecting them (hatchery trolleys, tools, wood shavings, spare parts, etc.)

The paved part in front of the entrance to the house is heavily contaminated with manure when loading birds and removing manure. If you don’t clean and disinfect this surface properly, dangerous pathogens are brought back inside when litter or new birds are delivered.

Good biosecurity protocols to keep diseases out only work if the diseases are not on the farm to start with. Thorough cleaning and disinfection between flocks is the key to keeping diseases out and breaking disease cycles. Include buildings/rooms adjacent to the poultry house and the pavement around the poultry house. Clean the feeding system between every flock (prevent diseases and feed spoilage by moulds and other contaminants). The new feed for the new flock must be delivered in a clean silo; skipping this step is risking your next flock at their most vulnerable point. In case of specific diseases (Histomonas, Coccidiosis, Salmonella, M.g./M.s.) during production, the process of wet cleaning should be executed twice. In case of Salmonella and M.g./M.s. during the preceding flock, dry disinfection should be done a second time. In case of Histomonas/Coccidiosis/Worms or leg problems caused by Staphylococcus during the preceding flock, a second wet disinfection should be performed. Downtime reduces infection pressure Downtime is the time between disinfection and placement of the new flock. Turn-around time the time between depletion/transfer and the next placement. For biosecurity downtime is of greater significance for reducing disease pressure. The longer the downtime, the more pathogens will die from lack of moisture, lack of food and the absence of hosts. At least one week is recommended. However, some pathogens, such as coccidian oocysts, can survive for long periods of time without a chicken host. A short turn-around time may be economically attractive but this must not be at the expense of thorough cleaning, disinfecting, and drying out of the house. Use the downtime to carry out repairs, and to check floors for cracks and open joints and seal them all thoroughly. Replace all pest control measures before the new flock arrives.

Remember •

• Cleaning and disinfection are essential not only between flocks, but also during production. Showers should be cleaned after every use. The hygiene lock must be cleaned daily and disinfected once a week. 24

•

The quicker the house is emptied and cleaned, the longer the downtime, the higher the pathogen-load reduction. Cleaning, washing, and disinfection are three separate steps! Clean/disinfect feed and water lines after every flock, and again before the new flock is placed.


Dry cleaning Remove any excess feed from the whole feeding system. Remove the old litter with a loader/tractor. Once the house is empty, dry clean the ventilation and heating systems equipment with a leaf blower: fans, wall inlets, heaters, air filters etc. Brush the remaining dust and debris from all surfaces and don’t forget hard-to-reach places; a pathogen lurking there might cost you your next flock. Clean and cover-up all non-washable equipment with waterproof protection: electric motors, sensors, heating equipment.

Not just the building

Points of attention: •

•

•

•

•

Remove manure and litter and dispose of it directly, away from the premises. Clear the immediate vicinity of the poultry houses of manure residues, feathers, etc. Remove all loose materials/installations from the poultry house (feeding system, hoppers, drinkers, fans, stoves, etc.). First lower the winchable parts in order to clean them with compressor and/or piston before hoisting them in anticipation of wet cleaning. Clean the house before working with water and remove loose dirt, preferably with an industrial vacuum cleaner. Replace all pest control points in order to control any moving pests during cleaning!

•

• •

•

Equipment and inventory. All equipment and inventory must undergo a thorough wet cleaning and disinfection. Don’t leave disinfected parts outside for unnecessarily long periods of time in order to prevent recontamination. Don’t put clean, disinfected materials on the floor or on pallets that have not yet been cleaned and disinfected. Silos. After wet cleaning, the silos must dry completely to prevent mould formation. Drinking water system. Dirt is deposited in the drinking water system during use, which is a breeding ground for bacteria and moulds. To remove this, the drinking water system must be filled with a high dosage of detergent (hydrogen-peroxide based). After soaking, the pipe(s) must be flushed thoroughly to completely remove loose dirt and detergent residues. No later than 24 hours before the birds arrive, flush the pipes with plenty of clean water to remove any detergent residue. Egg collection. Remove all loose parts (cups, drawers, brushes) from egg belts and the packer and leave to soak for a long time. Thoroughly remove all egg residue, especially in case of an M.g./M.s. infection in the most recent flock. Cover and tape the electronic parts well after manual cleaning and disinfection.

Before driving into the house with a loader to remove the old litter make sure all safety measures are observed: switch off the heat generators and raise or remove the feeding and drinking lines. 2. The b ro i l e r b re e d e r

25


Wet cleaning Cleaning should be done thoroughly, since disinfection after a bad clean will not have any effect. Wash the house internally and externally with a pressure cleaner (minimum 100 bar/1500 psi), preferably with hot water (> 40°C). For the interior of the house, wash in the correct sequence: clean ceiling and walls first. Always work from top to bottom. And, start at the rear of the house and move to the front. Wash off the detergent from the entire house and all equipment surfaces as it may later react with the disinfectant and reduce its efficiency. Scrape/sweep the water from the floor. Be certain that all dirt and debris (organic matter) is removed in the end. Pay attention to cracks and joints. You can kill as many as 80% of pathogens by first cleaning with water and a cleaning agent. This loosens and rinses away oil, grease and particles. By disinfecting after a thorough clean, you can reduce the number of pathogens by 99%. Give cleaning agents and disinfectants enough time to take effect, use the correct dose and make sure the temperature is high enough. When using cleaning agents and disinfectants, use adequate protection: gloves, a liquid-proof overall and a full face mask with filter. And, provide sufficient ventilation so that you are not working in unhealthy air afterwards.

The first step in wet cleaning is soaking the house for some time to loosen the dirt. After this, cleaning with a detergent takes place.

26

Drying the house After washing and before disinfection, drying the house is necessary. Using heating and ventilation systems will speed up the process. It is not always possible to see how clean the surfaces are until they are dry. Complete the final inspection after drying, and revisit the cleaning process if necessary; the loss of time is better than risking the health of a flock. Maintenance and repairs should be done prior to final disinfection, otherwise you might reinfect the equipment (gas/electrics, lights, feeders/drinkers, leaking nipples, cracked and damaged concrete floors and wall surfaces).

Points of attention •

•

•

•

•

All parts to be cleaned should first be foamed with detergent (soap/gel) and soaked for a sufficient length of time (at least 3-4 hours). Any ventilation shafts in the ridge must be thoroughly cleaned using a scaffold or approach it from the roof side. If possible, remove fans first. Clean ventilation inlets/outlets in the wall thoroughly from the inside to the outside as well as vice versa. Lower equipment (drinkers/feeders) for wet cleaning. After cleaning, hoist them up as high as possible to prevent contamination with dirty water. Clean the floor with sufficient pressure and plenty of water.

A detergent ensures the dirt will be removed. Rinse it off properly in order to optimise the effect of the disinfection.

B re e d e r S i gnal s


Disinfection Wet or dry disinfecting? Preferably both

The disinfection of the farm consists of two phases: wet and dry disinfection. Wet disinfection The first course of disinfection is wet disinfection by spraying disinfectant onto all surfaces and parts of the poultry house. This can be done with a high-pressure cleaner. This also applies to the installation/materials on the outside of the poultry house. All pavement within a ten-metre distance of the house must be disinfected. Dry disinfection Wet disinfection is always followed by the (dry) room disinfection. If performed with formalin (formaldehyde solution), this disinfection works best if there still is some residual moisture from the wet disinfection in the house. The agents used may vary, but always follow the advice on dosage and conditions (T, %RH) to increase the effectiveness of the disinfection. Some agents need a minimum temperature and a certain humidity to be effective (formaldehyde: 20°C, many other agents 15°C). In order to optimise darkling beetle control, extra heating of the poultry house can be beneficial for the activation of the beetles. Include all loose equipment in the disinfection. Disinfect the litter materials (wood shavings) including the bales for additional use later in the production cycle.

Wet disinfecting/spraying

Dry disinfecting/fogging

A longer contact time or exposure time is key for a good effect, but the disinfectant does not reach everywhere.

The disinfectant reaches everywhere and the surface range is maximised due to the small droplets. However, contact time is shorter.

Clean every little surface thoroughly, including places that are difficult to reach. Wherever there is manure or dust, there may still be live pathogens, even after disinfection. Check the disinfection action by taking samples. Good flock health starts with a clean environment for the day-old chicks.

Types of disinfectants and their effects Kills bacteria

Kills mould

Kills viruses

Kills fungal spores/ coccidia

Toxicity

Alcohol

+++

+++

+++

-

++

Chlorine compound

+++

++

++

+

++

Formaldehyde

+++

+++

+++

+

+++ +++

Product

Glutaraldehyde Hydrogen peroxide Iodophors Peracetic acid Phenol derivatives

+++

+++

+++

+++

+/- (against Entero- and Staphylococci)

++

++

+

+

++

+

++

-

++

+++

++

++

++

+++ +++

+++

+++

+

-

+/- (against gram-negative bacteria)

+

+

-

+

Sodium hydroxide

++

++

+

+

+++

Ammonia

++

-

-

+++

-

Quaternary ammonia

2. The b ro i l e r b re e d e r

27


CHAPTER 3:

First weeks of rearing

Young chicks need a draught-free, warm and safe environment. Since the chicks are lacking a mother hen (imprinting), they must learn survival skills from you and each other: eating, drinking, searching for feed, resting and sleeping. Your attention during rearing sets the foundation for their future production.

Uniformity and production 100 80% uniformity

Hen-day production

80 60 40

70-75% uniformity

20 0 24

30

36

42 48 Age (weeks)

54

60

The lower the uniformity, the more birds are not managed in synch with their requirements, resulting in lower performance and fitness. In cases of reduced uniformity, the young individual birds are in very different stages of sexual development when they go to the production house. The light comes too late for some birds and too early for others. The same is valid for feeding. This all results in a lower production and fertility. 28

Chick behaviour, body weight and flock uniformity are important management indicators during rearing. A uniform flock is a must to manage the breeder flock successfully and to achieve synchronised peak production. The rearing period can be divided into three phases: 1. Development (week 0-2). This is the basis for a good flock. At this stage, there is a minimum level of feed control, birds must be allowed to develop freely. Skeleton, heart and blood vessels, feathers, and their immune systems develop during this period, and uniformity is stimulated. 2. The rearing period (week 3-15). The emphasis is on controlled growth of the birds by carefully controlling the amount of feed. 3. Preparation for the production period (week 16-22). Rapid growth, including physiological composition and hormonal changes of the reproductive organs (puberty). B re e d e r S i gnal s


Sexing Sexing is essential in broiler breeders, since you combine lines with specific traits. If sexing errors remain in the flock and start to mate, this will result in broilers with poorer broiler characteristics, but also in a more uneven broiler flock. There are 3 sexing methods: vent sexing, feather sexing and

š

colour sexing. For the male lines often vent sexing is applied. The sex of an individual is determined by the sex chromosomes. In mammals the presence of the male-specific Y chromosome confers maleness: males XY, females XX. For birds it is the other way around: males ZZ, females ZW.

ş š ş š

š

ş

ş

Feather sexing

Colour sexing

Vent sexing

The sex-linked slow-feathering gene (Kk) codes for wing feathers length of day-oldchicks. A cross of a fast-feathering male with a slow-feathering female, results in slow-feathering male and fast-feathering female chicks. Look at the outer wing section. The bottom row of feathers are the base feathers, the top row the cover feathers. If the base feathers are longer than the cover feathers, the chick is female. If the base feathers are the same length or shorter than the cover feathers, it’s a male.

The sex-linked silver gene (Ss) or dominant white gene (Ii) can be used to sex newly hatched coloured parent chicks, which are often slow-growing breeds. It is based on the principle that the male and female lines can have genetically different colours. This gives the females the colour of the father and the males the colour of the mother.

Vent sexing is based on the appearance difference in the form of the cloaca of males and females. However, this is very difficult to see and requires a great deal of training and expertise. 1. The first faeces (meconium) is gently pushed out of the chick. 2. This will open the cloaca slightly. 3. If there is a small lump in the cloaca, the chick is male.

Genetic scheme for colour sexing Colour sexing scheme for feather colour white (I). But the same principle applies for dominant silver (S) and slow growing wing feathers (K). In this scheme you can also see why additionally for the male parent stock line vent sexing or feather sexing is required (since both males and females are white). All broilers will be white feathered. In practice, the various primary breeding companies and brands on the market apply different sexing methods.

B

C

D

Grandparents

I-

ii

II

II

Parent stock Broiler breeders

i-

Ii

II

II

I = dominant for white i = recessive for white

3. Fir s t w e e k s o f re a r i ng

Male line

Female line A

Ii

I-

Ii

I-

Ii

I-

29


Treatments and interventions Treatments of birds vary from country to country based on regional legislation and customer demands. The treatments are carried out to prevent serious injury to birds in later life. In several countries beak treatment of females is forbidden, but in most cases, it is still permitted for males. The need for treatment differs between breeds. Spurs may no longer be removed in the EU (since 2015). The following applies to all these interventions: ensure good feathering through feed and management in order to prevent negative side effects as much as possible.

LOOK-THINK-ACT

What’s going on here?

Beak Treatment Beak treatment is applied to prevent serious injuries due to pecking and damage to the female’s head during mating. However, feather pecking is rare in broiler breeders. It is largely genetically determined, and has been decreased by selection. A negative effect of beak treatment is that the initial uniformity of the chicks may be worse. The shortened beak may make eating and preening more difficult resulting in reduced performance. If not well executed, wounds pose a health risk and increased mortality. If beak treatment is not applied at the hatchery, and if you want to do it, ensure that this is done before the age of five days. This way the procedure is the least painful and the risk of permanent pain (phantom pain) is low. Do not remove more than one-third of the beak between nostril and beak tip. Hot blade Treatment with a hot blade at the hatchery or at the rearing farm on days 3 or 4. Advantages and disadvantages: + Individual customisation possible. – Risk of physical damage due to handling. – Open wound at risk of infection and blood loss. – Treatment that has made the beak too short can interfere with the function of the beak. – Mild treatment can result in regrowth. – It requires skill and the result is highly variable.

These chicks are pecking at the wall and on empty feeders. This is caused by the phantom pain that is a result of beak treatment. Consider whether beak treatment is really necessary.

Hot-blade treatment imposes a health risk. When chicks’ beaks have not been treated properly, make a note of these observations, discuss this with the hatchery in order to improve it in the future. 30

Hot-blade beak treatment in the poultry house.

B re e d e r S i gnal s


Effect of beak treatment on grading and mortality Grading and mortality/week (%)

IR Infrared beak treatment for chicks is often carried out at the hatchery just after hatching. In addition to the beak treatment, vaccinations can be administered at this time. Advantages and disadvantages: + Very precise work can be carried out and there is no open wound. + Little chance of infection and blood loss. + Little pain to the bird. – Settings per flock, no individual customisation. – Insufficient treatment results in regrowth of the beak tip. – Dark pigment in the beak can lead to uneven penetration of the infrared beam, resulting in an increased risk of split beaks.

1.2 grading moments

1 0.8 0.6 untreated 0.4 0.2 0

treated 5

10 Age (weeks)

15

20

Research shows that females with intact beaks have a better uniformity and are therefore easier to raise than females with treated beaks (IR). Each bird experiences the treatment differently, leading to less uniformity after treatment.

A day-old-chick before and after IR beak treatment.

Hot blade treatment gone wrong: not cut straight. IR treatment is more accurate.

At a later age, such a badly treated beak could lead to problems in feed intake.

Infrared beak treatment and vaccination for Marek’s disease in the hatchery.

IR beak treatment over time: at day 1 of treatment, after 15 days and at 57 weeks. The beak tip will fall off or crumble after a few weeks due to natural exploratory pecking behaviour.

3. Fir s t w e e k s o f re a r i ng

31


Beaks points are more likely to wear using a metal chain feeding system than with plastic feeding pans. Plastic pans could fitted with a ‘wear ring’ to facilitate smoothening of the beaks.

Alternatives for beak treatment There are alternative ways to make the beak point blunt, like offering a rough bottom in the feeding system. The birds eat normally and wear their beaks at the same time. After 11 weeks of age there is no difference in shape between infrared trimmed beaks and this natural wear of the beaks. It reduces stress and the risk of infections, and the birds are not put off feed in the first few days as they can be with other interventions. As a result, the birds are more uniform and perform better.

There are several beak smoothing systems, based on natural wear of the beak by pecking at surfaces. In this case a rough metal plate in the feeder.

Toe treatment in males Treatment of the 4th toe (dew claw) is executed in males to decrease skin damage of the female during mating. Mortality during rearing increases slightly, since every treatment will cause stress and - depending on the method used - infection risks. Advantages and disadvantages + Less damage to the skin and feathers in the females due to mating behaviour. + Less fear in the females. – Wounds can be a health hazard. – Phantom pain. – Stress.

Untreated (left) and treated toe (right) of a chick.

32

No treatment

Microwave treatment

Hot-blade treatment

Day 1, no treatment.

Day 1, microwave treatment.

Day 2, hot-blade treatment.

Day 18, no treatment.

Day 18, microwave treatment.

Day 23, hot-blade treatment.


Feeding systems in rearing Each feeding system requires different management, but it is important that rearing is in the service of production. Feed and water systems should be as similar as possible to those used in production. An extra feed line in the house provides more space and therefore less competition during feeding. If feeding and water systems in the production house are not similar, then the weaker birds have adaptation problems. If there are differences, the transition could be made easier with temporary measures, like putting in similar drinkers for a while. Or show some chickens how to eat and drink and the others in their turn will learn it from them.

This feeding trough is too high, the young birds can hardly reach the feed. They should not have to reach for it.

Chain feeder Intended for mash or crumb feed. The feed should be distributed all over the house and birds have access to it within 3 minutes. Place additional hoppers halfway along the length of the house for better and faster distribution. If houses are longer than 50 metres, the system must be filled from the centre of the house, in both directions. After the feed has been distributed, you can run the chain slowly to maintain a good distribution of feed. Make sure that the feed augers have a sufficient flow rate so that the capacity is never limited. Provide sufficient feeding space so that all birds can eat at the same time. A feed chain sometimes has to go through the whole house first, unless you can lift it up and then lower it when filled. Preferably run or lower in the dark, which creates more peace and quiet and lowers flock stress.

This feed trough is too high, difficult to access for chicks. Place the trough on the ground with litter around it.

Males and females housed separately

The amount of feed in this feeding chain system is too little. This will lead to a bad feed distribution and separation (or segregation) of feed ingredients.

3. Fir s t w e e k s o f re a r i ng

The birds have to be reared with separate water and feeding systems. Preferably also in separate houses in order to control light and climate by sex. Their behaviour and requirements are different; males eat faster, and their growth has to be controlled differently from that of the females. Also the light schedule can be different. If you rear them in the same house together with the hens it is very hard to get good rearing results. If you don’t have this option, more feeder space and drinkers are needed to minimise the feed and water competition. 33


During the first few days, some feed is often provided on chick paper in order to give the chicks a good start. This triggers the immune system of young chicks at the same time.

At first the feeding pans are place on the litter for optimal access for the young chicks.

Too little feeding space around a feeding pan. The birds are crawling over each other to get to the feed.

34

Feeding pans Not all pan feeder systems are suitable for broiler breeders. A simultaneous distribution of the feed per pan is essential. For rearing, the pans must also be easily accessible to small chicks. Regularly increase the feeding height to the correct level for the birds as they age. With feeding pans, all birds can eat at the same time. Pans take up more space and it is better to lift them up after feeding. Preferably use the same system in rearing and during production. In the case of integrated systems, this is easier than in the case of chain organisations.

After some weeks the pans are lifted up to a higher level. This decreases the incidence of spilling and droppings ending up in the pans.

Peace and quiet during feeding, no birds are still looking for a position...

B re e d e r S i gnal s


Spin feeders Spin feeders (floor feeding) promote scratching, this will improve litter quality and leg health. The natural foraging behaviour provides a distraction. A disadvantage is that the birds may learn to eat litter. Up to 14 days you feed crumb on supplementary feed trays on the floor. Then, mix crumbs and pellets on the floor trays for 2 days. Following this, you can switch to 100% pellets around 16 days of age via spin feeding. If the birds are restless, the litter layer might be too thick (> 1.5 cm), which makes it difficult to find the pellets. Make sure that the litter depth is at the recommended thickness for spin feeding to work properly. A good pellet is not easy to make: it should stay intact in the litter, but should fall apart in the crop. That is a big disadvantage of the spin feeder. Transferring to a different feeding system (mostly trough or pans) and thereby difficulty to find the feed in the production house is a second disadvantage.

When the spin feeder is running all birds will be picking up the pellets. Birds that don’t join in like these against the wall, need special attention: coccidiosis victims?

From above you can see the birds are grouped in circles: the area when grain or pellets are sprinkled. In the middle of the circle you see small area without birds, just underneath the spin feeder. Fine particles precipitate here and the birds don’t like that. Once the dust settles, they will occupy this part as well...

When large, hard pellets are provided with a spin feeder, you might see this problem. Birds eat too fast and too much, causing dry feed to get stuck in the crop. This full crop presses against the trachea causing the bird to gasp for air (soundless). 3. Fir s t w e e k s o f re a r i ng

Scan this QR-code to watch the video of this animal with a blocked crop.

35


Drinking systems

The drinkers are placed above the elevated slatted platforms to stimulate these birds using elevated areas.

Drinkers are made, not born that way! Most breeder pullets are reared with water restriction. Roughly two hours after feed clean up the water system is closed. Rearing farmers are afraid that continuous water availability will lead to over-drinking and wet litter. But obsessive drinkers mainly occur when water intake time is severely restricted and the birds are in a hurry. Providing water almost all day long results in a much calmer flock during the entire life. Remember: ‘obsessive drinkers are made, not born that way!’

The young birds should always have access to cool drinking water. However, water restriction is often required to keep the litter dry. And, with young birds, consumption is still low, causing the water in the lines to heat up in the warm poultry house. A farmer has to find the optimum balance between litter quality and water availability. Provide sufficient drinking space per bird. If there is not enough drinking space or the supply is inadequate, you can see that birds are still ‘drinking’ without water for a long time. If, for example, four hours after feeding they are still busy with the drinkers, something is wrong. Signals of poor water distribution: • There are no birds in the last 10 meters of the line. • Wet necks due to unrest and competition.

Advantages and disadvantages of drinking systems Bell drinkers (open)

Drinking nipples (closed)

Drinking cups (open)

70-80 birds/drinker

8-12 birds/nipple

20-30 birds/cup

Pros

Pros

Pros

•

• •

• • •

Water is readily available

• • • •

36

Less contamination Very little spillage (when replacing leaking nipples promptly) Lots of space to walk around Water level and height line easy to regulate Easy to clean during production In combination with drip cups!

Water is readily available Easy to check for blockages Water level and height line easy to regulate

Cons

Cons

Cons

• • • • •

• • •

• •

Costs labour (cleaning) Water not always fresh More risk of contamination Spillage, wet litter Water level and height drinker less easy to regulate

Higher investment costs Water delivery harder to control Increased risk of biofilm, requires high water quality management

• •

Higher investment costs More chance (vs nipples) of contamination Less space to walk around Drinking water vaccination difficult to apply (can’t be emptied completely)

B re e d e r S i gnal s


The correct drinking height

75 - 85° 35 - 45°

Until one week of age

One week and older

Adjusting the drinking height of nipple drinkers during rearing.

The adjustment of the correct drinking height for a bell drinker. The bottom of the bell drinker must be the same height as the back of the bird. The water level in the bell drinkers must not exceed 1 centimetre in depth.

week 6 week 4 week 2

Use the pressure regulator and make sure that the standpipe with the ball is clearly visible. Start small chicks with the lower ring, so that a drop can be seen and the chick can easily find the water. Increase every week by 1-2 rings to about 6 weeks of age to prevent water wastage and leaks.

Adjust the water pressure for nipple drinkers. Often lower the pressure at first, later in the round the pressure can be increased again. There should always be a drop of water on the nipple at the start. This attracts the attention of the chicks and causes investigative behaviour. This allows them to become familiar with the nipples quickly.

Regularly check the flow speed of the drinking nipples to assure the birds can drink properly. Preferably while birds are drinking and at the end of a drinking line.

A 360° nipple gives a high water yield and is easy for chicks to operate. The birds may drink too much (compensatory behaviour during feed control) resulting in wet droppings/litter. When using normal nipples, the chicks must really press the nipples. These provide less water and are too difficult for young birds to operate. Cage nipples are therefore not suitable for broiler breeders.

3. Fir s t w e e k s o f re a r i ng

37


Preparation of the house

Do not distribute the litter until the floor temperature is 28-30°C. The less bedding during heating, the earlier the temperature of the floor will be reached.

Day-old-chicks are very vulnerable. Besides this, there is a big difference between breeders and broilers. Breeders are sexed, vaccinated in the hatchery, have undergone other treatments, and the transport distance is often greater. Because of these stress factors, the new chicks need a lot of attention. Especially during the first days and weeks of life, hygiene is very important for the chicks. Young chicks are very susceptible because their intestinal flora is not yet properly developed, and the specific immunity is still lacking. There are many risks from their immediate environment, such as IB, salmonella, and Marek. Housing and equipment have to be cleaned, disinfected and bacteriologically tested before litter and chicks arrive. Vehicles, materials and people’s clothing also need to be clean. Do not drag materials from one poultry house to another.

Heating up the house decreases relative humidity. Day-oldchicks require a high humidity. Create wet patches and let this water evaporate by the heaters to increase RH.

ᅚ

X

Checking the floor temperature with an infrared thermometer is a good objective method. Make sure you check the floor and not the litter, so move the litter away from the spot you are measuring. The litter temperature itself is often higher.

Just feeling the floor is useful to get an idea of its temperature. The back of your hand is even more sensitive than the palm of your hand! 38

B re e d e r S i gnal s


The ideal temperature At least 24 hours before the chicks arrive, the house must be at the desired temperature: the floor 28-30°C (concrete floor: 2-4 days before the litter is distributed), the house 34-36°C. The ideal litter temperature upon receipt is 30-32°C. Check this before the chicks arrive! Maintain a relative humidity of 50-60%. At the beginning, give them access to a small part of the house (25-30% of the total area). Keep them close to feed and water by adjusting the lighting or by placing a fence. Do not reduce the room temperature until the body temperature of the chicks is 40.5°C on average. In the end, the decrease in house temperature should be based on chick temperature, not on the calendar! Check the body temperature of the chicks regularly, especially during the first 2 days. If it is not within 40-40.5°C, adjust the temperature.

'Cold-blooded', Transition around 'Warm-blooded', chicks can environment crucial 5 days old regulate their own body temperature 0

21/0

hatchery

5

age (days)

10

rearing house

The chicks can’t regulate their own body temperature yet. They are ‘coldblooded’ for the first 5 days and their temperature is regulated by the environment. The air temperature must be 33-35°C for the first few days, both day and night! The temperature must be even higher if the chicks are very small.

Taking body temperature is a good way to check whether the ambient temperature is right for the chicks. It should be 40-40.5°C. Measure the temperature, preferably rectally or with an infrared thermometer on the vent, at least of 10 chicks from 5 different places in the house.

Place extra drinking places for the first few days. Rule of thumb: the distance from a chick to feed and water should not be more than 1 metre.

Gas stoves create warm areas in the house. Chicks that are cold, can warm up under the stove. 3. Fir s t w e e k s o f re a r i ng

The chicks are grouped around the gas heater to keep warm. But not directly underneath it, since that area seems too hot for them. The chicks can choose their own area of comfort. 39


Transport to the rearing house

Preferably use closed trucks for transport, since this ensures better climate control.

40

Day-old-chicks to be raised as broiler breeders are more vulnerable than broiler chicks. Mortality of broiler chicks is close to zero (0-0.1%), whereas normal transport mortality of broiler breeders is 0.2-0.4%. In order to limit losses, prevent too many shocks during transport and secure sufficient air movement between the boxes/crates. Make a good loading plan for the truck. Once at the poultry house, unload the truck immediately. But, if you have to wait and the closed truck has a ventilation system it is better to leave them in the truck, instead of having them stacked up in the poultry house with little air movement. Within an hour the chicks will get overheated. If they are not stacked up, it is no problem to leave them in the crates/boxes for a short time in the poultry house.

Take out dead and very weak chicks immediately and count them in order to assess whether it is within acceptable limits. It is an indication of the new flock’s quality.

Make sure the crates with chicks are properly secured. The trip already causes enough stress in itself...

Cardboard boxes are hygienic for single use, but ventilation is not optimal because of the relatively small ventilation openings. This, together with the insulating quality of cardboard, compares unfavourably with plastic crates. Heat stress is an important cause of mortality.

Don’t leave chicks in stacked up crates/boxes longer than necessary. This may cause them to overheat and dry out quickly, resulting in reduced welfare, poor uniformity, and poor growth. This thermographic image shows that the chicks at the top are getting too hot.


Arrival of day-old-chicks Place the chicks carefully and smoothly in the brooding area and clean up the crates/boxes immediately after emptying. Carefully release the chicks by keeping the crates just above the ground, and then gently tilt them. The reception of chicks is the same whether they are broilers, laying hens or breeders. Only the temperature schedule needs to be adjusted. There is a big difference between chicks of young (grand)parents and old

(grand)parents. Chicks of old grandparent flocks can regulate their own body temperature 5 days after hatching. In chicks of young grandparents this often comes two days later. Keep chicks from different origins as separate as possible. With broiler breeders there is a greater chance of multiple origins. If you need to combine, mix with the same age group or a maximum of one age group difference.

Disinfect the floor outside the poultry house before arrival of the delivery truck. This prevents diseases from entering the clean house.

A temperature logger from the transport truck provides information about the start of the new flock. Take this into account when assessing the flock the first few days.

ᅚ Do not throw the day-old-chicks from a height (left), but just turn the box gently (right).

After unstacking the boxes spray vaccination is often applied.

3. Fir s t w e e k s o f re a r i ng

After spray vaccination chicks are wet, which makes them vulnerable for cold (evaporative cooling). Leave them in the boxes for a short while and make sure temperature and relative humidity are OK in the house. 41


Small chicks? Chicks from young grandparent stock are smaller (smaller eggs mean smaller chicks) and have a relatively larger body surface (they cool faster). That is why there are often more failures in the first week than in chicks from grandparent flocks older than 30 weeks. The higher mortality can be prevented by increasing the room temperature during placement (plus 1-2°C) and taking extra care to ensure that they eat and drink quickly. Always ask the hatchery the age of the parents and if the supplied flock of chicks comes from different farms. Then you can take this into account with your management.

Take samples from chick paper or transport box lining to be checked for Salmonella, ESBL, etc.

A hole in the feeder allows feed fall on chick paper (together with dextrose for extra energy = white powder).

Take a sample of some chicks out of the boxes to assess the quality more specifically.

Using a thermographic camera clearly shows nice warm legs (left) and a chick with cold legs (right). In fact, the colour of the legs should be lighter than the colour of the hand.

42

Feel the legs of chicks against your cheek, or even better: your sensitive lips. If they feel cold, this is not good. If the chick’s temperature falls below 38.5°C, the soles of the feet will cool down and the activity of the chicks will decrease (hypothermic). The bowel function comes to a standstill and the chicks go into survival mode. Increase the room temperature!


Climatic requirements A combination of local heating and space heating is ideal. If you have to choose, local heating (spot brooders/pancake brooders) is preferable to space heating. As the chicks grow older, their absolute daily growth increases rapidly. Approximately a quarter of all energy absorbed is used to move, grow, breathe and maintain body temperature. The rest is released as heat. However, chicks cannot sweat. The most important way to get rid of excess heat is through convection and conduction (through the floor), and by panting!

By using transport crates as barriers you create an environment where day-old-chicks can get accustomed to the new environment. It offers the option for coarse spray vaccination and feed is provided on the chick paper.

After spraying, the chicks are still close together and stay warm. As there is no water supply yet, they will ingest the droplets from each other and the floor for optimal vaccination result.

After removing the crates and lowering the drinking lines, the chicks disperse, explore and start drinking. The chick paper still indicates where the initial enclosure was.

Brooding rings provide a micro climate that can easily be controlled. It also provides the option to keep chicks of different origin (different grandparent stocks) together.

A drop of water hanging down from the nipple will stimulate the chicks to drink immediately.

Additional feeding plates give day-old-chicks a good start.

Additional heaters can be placed to provide extra heating the first few days.

43


Chick distribution The layout of rearing houses doesn’t differ very much. In most cases, during rearing, broiler breeders are housed on complete litter floors, with the type of litter varying from region to region depending on availability. In Europe, wood shavings, peat, chopped straw or straw pellets are mainly used. In Asia often rice hulls are used. A complete litter floor also means that the chicks can move freely. Signals from their group behaviour can help you to create the optimal climatic conditions.

During the first week, checking on the birds is essential. Check the climate conditions while you are walking through the flock.

Temperature signals of chick distribution in a brooding ring Temperature too high

Correct temperature

Temperature too low

Draft

•

• •

• •

•

• •

Chicks pant, head and wings droop. Chicks are quiet. Chicks away from brooder.

Chicks are evenly distributed. Noise level indicates satisfaction.

Chicks crowd under brooder. Chicks are noisy, distress-calling.

Chicks huddle in one area.

ᅚ The chicks are clustered and a lot of them at the end of the house: they are feeling too cold!

44

Here the chicks are more evenly distributed.

B re e d e r S i gnal s


Humidity The chicks come from a hatchery with high humidity. During the first three days the RH must therefore be between 50 and 60% to prevent dehydration and respiratory tract problems, and to guarantee a better and more uniform start. Poultry houses with a fired stove and/or a heat exchanger easily drop to a RH of 30%. Extra attention has to be paid particularly with these systems. Check this every day with a hygrometer.

L LOOK-THINK-ACT

How did this litter get so damp? In the 2nd week you notice that the litter is very moist, while it was dry the week before. This is because there is condensation in the deeper layers and the litter absorbs the moisture like a sponge. It is caused by insufficient heating of the floor before the litter was spread. Always heat the floor first and then after that, a thin layer is sufficient. New concrete floors also increase the risk of condensation. You can raise the RH by using nebulisers or portable sprayers. If the air humidity is too low, the chicks develop dry throats with a high risk of health problems.

If your glasses fog up immediately after entering the house, the moisture content of the air might be too high due to insufficient ventilation. Is it cold or humid outside? Then make sure that there is sufficient ventilation and heating to maintain the correct temperature.

3. Fir s t w e e k s o f re a r i ng

High humidity close to the wall. The house was probably not heated up sufficiently. You can see the chicks are feeling cold (huddling).

45


Poisonous gasses and dust Next to temperature and humidity, poisonous gasses and dust should get due attention, since these are a health risks for the young birds. You can’t see it directly, but you can measure it.

Start ventilating at arrival of the first chicks. CO2 sinks to the bottom, because it’s heavier than air. CO2 can kill the chicks and must be less than 3,000 PPM at chick height. If it is too high, then the behaviour of chicks is different: much less agile and virtually no feed and water intake.

Chickens can become blind from too much ammonia in the air. A first signals is an irritated rim around the eyes. When severely affected, you will see an almost circular, grey-white, opaque, rough looking area in the middle of the cornea.

Dust from litter, dry faeces, feed, skin and feathers is bad for people and chickens, and can cause irritation of the respiratory tract and carry large numbers of germs. You might think it’s not too bad, but if you take a picture with a direct flash, you can see how much dust is floating around (image right). The dangerous fine dust (particles < 10 μg), isn’t visible. A lot of dust is also a signal that the RH is below 50%.

46

B re e d e r S i gnal s


Light in rearing For the first 24 hours, the light must be turned on almost continuously. Then, reduce every 2nd day by 2 hours to 16 hours a day, depending on development. If they are not at the target weight, they need longer feeding time, so keep the light period constant or increase it slightly. In the case of closed housing, the day length must then be reduced to 8 hours at the age of about 29 days. The light intensity should be high during the first few days so that the birds can find feed and water well. Guidelines: • 0-5 days; 80-100 lux • 6-10 days: 30-60 lux (60-80 lux in open sided houses) • > 10 days: 10-20 lux. Lower light intensities can be used when pecking or feather sucking occurs, or to reduce the activity of the birds. Limiting day length is also an indirect way of feed restriction. After about 8 hours all feed is digested. With a longer night the birds would like to eat, but don’t eat in the dark and therefore use their fat reserves. Broiler breeders do not naturally react positively to a stimulating day length (more than 11 hours of light). To do this, they must first be exposed to a period of neutral or short length (8 hours), for 18 weeks. In closed housing, avoid day lengths of more than 11 hours during the rearing period, as this slows down sexual development, reduces the number of eggs and increases egg weight.

Always take behaviour into account. If chicks are grouped against the wall, this could be a signal of the house climate, but it could also be caused by the light distribution. Chickens are forest birds that protect themselves by hiding under bushes in the shade. Make sure you draw the correct conclusion when you see this!

3. Fir s t w e e k s o f re a r i ng

Light intensity

Chicks can see well at 1-2 lux, but if they are transported to a new environment, they need more light in order to be able to explore the environment properly. Watch out for abnormal pecking behaviour and dim the light if you see this. A luxmeter is a useful tool in this respect.

For mobile phones, luxmeter apps are available. These are not as accurate as a professional luxmeter, but give you a good idea. Your own eyes adapt to the light in the house, so the human eye is not reliable to assess light intensity.

47


Feed and water during rearing The first few days, water and feed are of utmost importance. Monitor the water and feed intake and the birds daily. Rations with a lower protein content during the rearing period offer benefits

for body composition (more fat, less breast meat), bird activity (more feeding time) and behaviour. It also has a positive impact on reproduction results. However, the feathering is negatively affected.

Checklist feed and water Feed • Is the feed and water available within a metre of every chick for the first week? • Does the feed consist of crumbs or mini pellets (2 mm)? • Have additional feed trays been installed? (1 per 80 chicks) • Is chick paper used to put feed on? • Is the chick paper placed under and/or next to the waterlines? • Can each chick absorb at least 30 grams of starter feed on the chick paper? Allow the chicks to eat unlimited feed for 2-3 weeks until the desired body weight is reached. • If the target weight is not achieved at 21 days, give them an extra week of free feed intake.

48

Drinking water • Are there any additional manually refillable drinkers? • Does the drinking line hang rather low during the first few days, so that the chicks can easily reach it? • Are there enough nipples/drinking space? 12 chicks per nipple or 8 drinking bowls/12 mini drinkers (or plastic trays) per 1,000 chicks. • Is the water temperature between 15 and 20°C? • Is the drinking water fresh and clean? • Was the water supply flushed 1-2 hours before receiving the chicks? This must be repeated at least twice a day during the first week. • Is the maximum distance to drinking water 1 meter? • When using nipples, is the water pressure low enough in order to have a visible drop on the nipple and still have water at the end of the line?

A low uniformity at the start translates into uneven levels of maturity in later life and therefore a flock that’s more difficult to manage (= production losses). The chick on the right is underdeveloped and has an unhealthy appearance.

Don’t just look at the weight of the chicks, but also take liveliness into account. The chick at the right is not as lively as the one at the left.

This three-weeks-old male is too small and will not be able to catch up. Remove this bird from the flock.

This one-week-old chick in typical ‘penguin position’ (left) is not feeling well. And a dirty cloaca (right) is often seen around this age, more with males than with females. This is no cause for alarm, unless excessive. B re e d e r S i gnal s


Checklist crop filling Check the crop filling daily. If the crop filling is below the normal value, check the following: • Was the poultry house sufficiently warmed up for placement? • Was the air temperature, bedding temperature, and relative air humidity okay at the time of placement? • Is the light intensity optimal for the chicks? • Are the ventilation values correct and are they evenly distributed throughout the house? • Do the chicks have unlimited access to feed and water? • Was the drinking water clean (no detergents, disinfectants or other residues)? • Are the feeding and drinking areas correct and is the water pressure not too high? • Have small amounts of feed been provided on a regular basis?

LOOK-THINK-ACT

Asses the crop filling after 24 hours. What does this tell you? The chick has a filled, soft, round crop. If the crop is full, but you can still feel the original texture of the crumb, then the chick hasn’t drunk enough water yet. Check the filling of the waterline for the first 48 hours, and especially the first 24 hours, regularly. Check 30-40 chicks from 3 different places in the house. Feel the crop carefully.

Normal values for crop filling

Four chicks of one week old that lag behind. They still have a yellow down, are balled up and less developed than their flock mates and sit against the wall, away from the rest of the flock. They probably suffer from intestinal problems.

Time after placement

Chicks with a full crop

2 hours

75%

8 hours

More than 80%

12 hours

More than 85%

24 hours

More than 95%

48 hours

100%

Crop filling assessment Check the crop firmness of at least 20 birds per house daily, a few hours after feeding. With sufficient water intake, this is flexible and malleable. Insufficient water consumption makes it feel hard and grainy. If they have taken up too much water, you can easily squeeze it in. You could compare this with the ‘feel’ of rice in various forms.

X

Uncooked rice = not enough water

3. Fir s t w e e k s o f re a r i ng

~

Dry boiled rice = water intake still too little

ᅚ Rice pudding = OK

X

Milky = too much water intake

49


CHAPTER 4:

Rearing from 3 to 17 weeks

After the first few weeks, the period of feed restriction starts in order to regulate the weight and body development of the birds. Grading birds and removing sexing errors to maintain or improve flock uniformity is a very important task in this period.

50

Effect of perches in rearing on floor eggs

Floor eggs (%)

In the wild, a chick sleeps under the wings of its mother during the first weeks, and under trees and bushes up to an age of 8 weeks. Then a chicken starts sleeping in a tree to be safe from dangers (snakes, foxes). During the day a chicken expects danger from above (birds of prey) and will hide under trees. So from about 6 weeks onwards you should offer elevated resting places, like slats or A-shaped racks. This helps them to prepare for easy entry of the laying nest during the production period and increase leg strength. It is also a management tool: birds sitting high up during daytime are often frightened birds. At night it’s the other way around: the dominant birds rest high up and the frightened birds are chased away to the litter. So pay attention what birds are where and why. A good size per platform is 240 cm x 60 cm surface and 50 cm height. 500 chicks require 1 m2 (slats). Never place an electric wire near the jumping platforms: this will stop the birds from ever trying to jump again.

reared without perches

reared with perches from 8 weeks

25

26

27

28

29

30

Age (weeks) By placing jumping platforms or perches, the percentage of floor eggs in the laying period is 3-5% lower. The quality of the legs is improved by less contact with litter and more movement by jumping. Use the jumping platforms from the age of 6 weeks.

B re e d e r S i gnal s


The first few days, jumping platforms and bell drinkers are still up against the roof. The day-old chicks have to use the drinking nipples. After a few days the bell drinkers are lowered. From 6 weeks onwards the platforms are lowered.

To make the jumping platforms extra attractive, you can offer drinking water above it. Preferably with a separate connection so that you can use them separately from other drinking water supplies (training).

Monitoring is also paying attention to general behaviour. If you clap your hands all birds should raise their heads, like here.

Healthy inquisitive behaviour. If you stand still, the birds should come to you and start pecking at your boots.

With a normal stocking density of 9 birds per m2 the birds look very well (left). With a high stocking density of 12 birds per m2 the feather cover is clearly damaged (right). The number of feeding places per bird was the same in this case, so this is just because they are closer together. As a result, the birds rub more against each other, especially during feeding, which is at the expense of the feather cover. This will not recover.

Females have a habit of scratching away from the light. You can use this knowledge to keep the litter layer in good condition, by switching on the lights alternately (first even, then odd rows of light). This causes the birds to scratch the litter back and forth, preventing the development of areas without litter. 4. R e a r i n g f ro m 3 t o 1 7 weeks

51


Controlled feeding

Skip-a-day or other feeding programmes with feed-less days are often required to compensate for inadequate feeding systems in rearing. In the past, it was not possible to get small amounts of feed properly and quickly distributed (within 3 minutes) into the house/feed system, leading to loss of uniformity in the flock. With modern systems this should not be a problem and these are therefore suitable for daily feeding.

During the first 2 to 3 weeks of rearing, the feed is usually offered freely (ad libitum) for female pullets, the feed is only limited after that. Males can be fed freely for up to 3-4 weeks until the target weight is reached. Then you feed according to body weight. If the males do not reach their desired weight at 14 days, do not adjust the number of hours of light for a week. After that, the lighting scheme is reduced to 8 hours of light if possible. Feeding every day gives the best production and lower feed intake (more efficient). In general, it is also easier for a flock to get into production. This can go hand in hand with good uniformity and good production during the laying phase. The biggest restriction takes place between 6-7 weeks and lasts until 15-16 weeks of age. At the end of the rearing period after 16 weeks, the daily feed quantity is increased to prepare the females for the production period.

The effect of the different feed programmes on feed conversion Every day

Skip a day

4-3

5-2

FCR at 21 weeks

3.7

3.9

4.0

4.0

Settable eggs/hen up to 45 weeks

94

90

87

91

Every day feeding gives the best production results. Total feed intake is 5 to 10% lower during the rearing period when birds are fed daily.

Various feeding programmes Feeding Abbreviation for programme FED

SAD

SAOD

6-1

5-2

4-3

Feed Every Day

Skip A Day (1/0)

Skip An Other Day (1/1/0)

6 days feed, 1 day no feed

5 days feed, 2 days no feed

4 days feed, 3 days no feed

Abnormal behaviours Controlled feeding of breeders provokes some stress and frustration and can lead to stereotypical object pecking, drinking too much water, hyperactivity, stereotypical walking, increased aggression, and increased feeding motivation. Parameters in the blood can also indicate stress. Hunger or stress, both are undesirable for good welfare.

Remarks In Europe, daily feeding is usually applied because legislation does not allow to skip one day’s feed.

200

On feeding days a double portion of the advised daily intake is given to compensate for non-feeding days. Outside Europe, skip-a-day is often applied to improve flock uniformity. Stress levels with skip-a-day are higher than with daily feeding. Higher risk of abnormal liver conditions.

200

On the feeding days a larger portion (+50%).

200

On the feeding days a larger portion (+17%). Not so much different from Feed Every Day.

200

On the feeding days a larger portion (+40%). Similar to skip-another-day, but every week the same schedule.

200

On the feeding days a larger portion (+75%). Similar to Skip-a-day, but every week the same schedule.

200

100 0 mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

mon

tue

wed

thu

fri

sat

sun

100 0

100 0

100 0

100 0

100 0

If you use feeding programmes, don’t forget to convert this to the programme you’re using. So, for example, if you want to feed 70 grams per day with a 5-2 programme, then you give 98 grams per day (7 * 70 = 490 : 5 = 98 grams). 52

B re e d e r S i gnal s


Monitoring weight

A feed-less day

Between 5 and 10 weeks the females can grow very fast. That’s why you have to keep checking body weight and uniformity. Start with weekly weighing after the first week. Between 10 and 15 weeks, the amount of feed is slightly increased and there is room to adjust the daily feed quantity to achieve the target weight at 20 weeks. Weighing during rearing 0 to 6 weeks: • Weigh a fixed number of chicks on arrival. • Regularly review the filling of the crop to get an idea of the appetite development. • Weigh 2% in groups or at least 50 chicks from each group at 7 and 14 days of age. • Start between 14 and 21 days with individual weighing of birds. This allows you to check the uniformity of the body weight (= CV%). • Weigh males and females weekly to adjust the feed dosage to the weighing results.

On days with feed, the bird stores nutrients in the body. On feed-less days, the bird’s body reserves are broken down again in order to obtain nutrients. It’s not 100% efficient. Extra energy (= feed) is required to compensate for these losses to eventually reach the same weight. A daily feeding programme can save 5 to 10% of the feed over the entire rearing period. This means that with feed-less days, you will incur higher feed costs. Feeding every day or a 6-day feed regime 1 day without feed is much more efficient in terms of feed consumption. Often birds are weighed on feed-less days, because then the measurement for the body weight is more accurate. If you don’t have a feed-less day, weigh in the morning before feeding!

Automatic weighing gives a better weight profile than manual weighing, because it is not limited by time or preference. With young chicks it is difficult to get a correct picture of the weights, because feed and water consumption have a relatively large effect. Therefore, always check manually for calibration purposes.

When weighing manually, always weigh the birds at the same time and place before feeding. Once the birds have ingested feed and water, deviations of 6 or 7% in body weight can occur. The body weights indicated by the breeding company are prior to feeding.

Heat production and feeding schedules

5-2

4-3

skip-a-day

daily feed

Heat production (kcal/hour/bird)

12 11 10 9 8

skip-a-day, for feed day

7 6

skip-a-day, for off-feed day

5

dark period

4 -2

The livers of 4-3 are clearly paler (liver degeneration) and enlarged. The birds that are fed daily provide the most uniform image with a normal liver colour. 4. R e a r i n g f ro m 3 t o 1 7 weeks

daily fed birds

1

3

5

7 9 11 13 15 Time after feeding (hours)

17

19

21

Digestion of feed produces heat. On off-feed days, they produce less heat. Therefore, raise the house temperature on days without feed. You can actually feel that the feet are colder on off-feed days. 53


Reducing feed restriction stress Feeding broiler breeders during rearing with an adjusted feed (low energy and protein), low protein, or fibre-rich feed can reduce the stress of controlled feeding. However, this is not yet widely applied. Feed with a lower protein content For feeds with lower protein levels, more feed should be provided, and the birds spend approx. 25% more time eating. This results in more fresh droppings and therefore more litter. However, due to the lower protein level of the feed, the birds take up less water, which means that the fresh droppings are drier, the litter remains drier and does not clog up as quickly. So the amount of droppings increases, but the litter doesn’t get wetter.

With controlled feeding this is what you want to see once the feeding starts: all birds are eating.

Dilution of feed Diluting feed with raw materials with little nutritional value (e.g. alfalfa, oat hulls, wheat bran) also increases feed intake time and thus provides improved well-being. In addition, it makes good feed distribution and good uniformity easier. The body weight of the chicks of young parents fed with this practice is therefore higher. It also has a positive effect on the laying percentage and mortality of the offspring around peak production and at the end of the laying period. Points of attention concerning controlled feeding • In general, it is better to use mash feed instead of pellets to extend the feeding time. However, the mash feed must be sufficiently homogeneous to prevent the birds from eating selectively. • Make sure all birds can eat at the same time, otherwise it will be at the expense of the smaller birds. You can achieve this with a good feed distribution in the house and a good water distribution. • Provide sufficient space in the feeding systems to prevent aggressive behaviour around feeding, as unrest around feeding can lead to more feather and skin damage. • The speed with which the feed is distributed is very important to ensure that all birds can eat the same amount at the same time. This improves flock uniformity and prevents aggression around feeding between the birds. All birds must be able to eat within three minutes after the start of feeding.

Connecting to natural foraging behaviour

After some time there is a shift from eating to drinking and then it becomes busy around the drinkers.

54

In the wild, chickens eat mainly seeds, herbs, worms and insects. That is feed with a low energy content so consequently, the birds spend more than 50% of the day foraging. They put together their own ration. Chickens prefer small feed particles of 2-3 millimetres. Red and yellow coloured particles are particularly attractive. They prefer to forage with bright lighting (more than 200 lux). By aligning more with the natural foraging behaviour by spreading grain and/or offering less concentrated feed, you reduce stress and improve well-being.

B re e d e r S i gnal s


Feeding management Make sure that you are regularly present during feeding to recognise a normal situation and pick out any abnormalities. That way it’s easier to recognise a signal when something’s not right. Some females might not allow other birds to eat, even after they have eaten enough themselves (hierarchical behaviour). That is also a good reason to walk through the house to distract the birds. Chickens can be trained by switching on a light or making a certain sound shortly before feeding. They get conditioned to this and stay calmer because they are never surprised by the feed. This prevents stress and preserves the peace and quiet in the poultry house.

Feathers in the litter This is a good signal, because the birds do not seem to have the urge to eat the feathers. In broiler breeder farming, the cause of down feathers in the litter is usually not pecking, but the normal loss of (down) feathers. If you see no feathers in the litter, that would be a bad signal. They have probably been eaten: a lack of crude fibre or a signal of general discomfort?

Slow growing breeds during rearing Dwarf females for slow growing broilers require less feed for maintenance. The dwarf females should be taught to eat sufficiently during rearing, so they have enough eating capacity towards peak production.

Offer chicken grit on a regular basis from six weeks of age. This is necessary for good crop development and gizzard function.

If the birds are used to you being present when they are eating (in this case: activating a spin feeder), they will not deviate from their normal behaviour. You can then more easily pick out birds that show abnormalities.

By feeding in the dark, the birds stay calmer and the birds won’t eat immediately (image left). It is then easier to distribute the feed well through the house and when the birds are ready, the feed is ready. After the lights have been switched on it takes about 5 minutes before the birds are uniformly distributed (image right).

4. R e a r i n g f ro m 3 t o 1 7 weeks

55


Water restriction

This bell drinker is not adjusted properly and causes wet litter. Make sure that water is always available until at least two hours after feeding, so there is no fight for water resulting in spilling.

LOOK-THINK-ACT

Often water restriction is applied during the rearing (from a few weeks of age) and production period. It is used to prevent feed-restricted pullets and breeders from drinking much more than they need in an attempt to satiate themselves. This can help to prevent wet litter. When water control is applied, water is usually offered around feeding till a few hours after feeding. This is dependent on the climate and conditions in the poultry house; there is no perfect rule of thumb. Water restrictions are usually considered undesirable with a negative impact on welfare and are therefore prohibited in some countries. A flock can sometimes contain birds that drink a lot of water (drinkers). Often this is compensatory behaviour on the feed restriction. It’s a sign of stress. So-called ‘drinkers’ are not born that way. The critical period is around six weeks. The farmer then tends to shorten the water period in order to avoid wet litter. As a result, birds may drink more quickly, especially if the water is severely controlled. Checking the water intake of the birds themselves is paramount (not water-feed ratio). A good accurate water meter can be a very useful tool. The water capacity and supply must be sufficient.

Tip Especially at higher temperatures you must increase the amount of water. If the poultry house temperature is above 28°C, you must provide more water. There’s no risk in this. In very hot weather you can sometimes stop water flow for a short time, so that the new water is fresh and cool again.

Undigested feed in droppings? If the birds are offered unlimited water, the passage rate of the feed through the gut increases. As a result, parts of the feed remain undigested (see photo). Providing unlimited water therefore requires appropriate management. It is good for the welfare of the birds, but must be managed carefully.

56

B re e d e r S i gnal s


Dietary protein and body composition

Body development One of the problems in breeder production is that, at the end of the laying period, egg production sometimes decreases too rapidly (bad lay persistency). At the end of rearing, therefore, the body composition should be adjusted to more body fat and less breast meat. Sufficient abdominal fat seems to be related to good laying persistency. This means that the females must have a higher energy intake and a lower protein intake during rearing on a daily basis. Diets with less crude protein results in a higher percentage of body fat and a lower percentage of breast meat. These birds turned out to be more persistent after 45 weeks of age than those that were given a high percentage of crude protein in their diet (= standard feed).

High protein

Low protein

Breast meat (% of BW)

20.2

17.4

Abdominal fat (% of BW)

0.7

1.3

The amount of protein in the diet during rearing affects the breast meat and abdominal fat %. You don’t want too much body protein, because this must be maintained. Nor do you want big females that have trouble mating, so keep the protein content low.

Uniformity and quality of the birds is not only determined by the weight, but also by their development. The couch potato has the same weight as the weight lifter, but they certainly have different body development/composition.

Development of birds at 13 weeks of age The birds must be at the same stage of development so that they have equal needs in terms of feed, lighting, care and so on, and become sexually mature simultaneously. Underdeveloped

Reasonably developed

Well developed

š ş 4. R e a r i n g f ro m 3 t o 1 7 weeks

57


Uniformity Management in general aims at the average bird, but that bird doesn’t exist. So you have to deal with variation in a flock. The less uniform the flock, the fewer birds are in the range defined by your management goal. The result is then that more birds are not managed in an optimal way and problems become larger over time. You can start grading from an age of 2-3 weeks. Natural variation is about 5-7%, so you could reduce a CV of 12% to 6%, but below that is impossible. If your starting material is already variable, then you have to adjust your goals.

Without grading Average weight

Average weight

Average weight

Day 1 - CV% 8-9

Day 21 - CV% 10-13

POL - CV% >15

Good uniformity is essential for good egg production and fertility. With a less uniform flock there are big differences in the development of the birds within the flock and it is also a signal that something went wrong in the rearing management. Uniformity can be endangered by things such as too little feeding space, high stocking density, poor feed distribution, bad health, et cetera. A uniform flock is easier to manage because the birds are at the same stage of development. The older the birds get, the more variation occurs (individual reactions, vaccinations, diseases, etc). Regular grading in which the smaller birds are set aside is necessary; this is a continuous process. After 12-14 weeks this no longer makes any sense, the skeleton is then almost completely formed. Small birds will stay small and with extra feed they will only put on more fat. It is precisely these fat birds that cause problems at the start of production (prolapse).

With grading at 28 days of age Average weight

Average weight

Day 1 - CV% 8-9

Day 21 - CV% 10-13

Average weight

POL - CV% 8-10

By dividing the birds into equal groups (light, normal, heavy), the birds will also be more uniform later. You can therefore adjust the feed supply per group in order to achieve the desired growth curve.

A very small hen in a 14-week-old flock. This bird must be graded; it is too far behind. Or, it must be put in a separate group to catch up.

58

Uniformity and variation If you only calculate the average weight of a flock, this does not give you any information about the quality of the flock. After all, you want to have as many birds as possible that have a body weight that is as close to the average as possible. That’s why you determine the degree of uniformity. In certain European countries, the percentage of birds that are between 10-15% below and 10-15% above average at a certain age is calculated manually. Example: Average weight is 1500 grams. 65 of the 80 birds weigh between 1350 and 1650 grams (+/- 10%). Then the uniformity is: 65 : 80 = 81.3%. Internationally, the CV% (coefficient of variation) is generally used. The percentage refers to the calculated standard deviations divided by the average. In the case of electronic weighing, the unit calculates this value. A good rule is that between 4 and 12 weeks of age 90% of the birds should have a weight that differs no more than 15% from the average. From 12 to 20 weeks, this is 85%.

B re e d e r S i gnal s


Grading Larger birds are more dominant and these birds have the best access to feed, so differences increase. The solution is keeping birds in uniform groups (grading). You can feed the groups differently in order to improve uniformity. At four weeks you start grading among the females. In Europe, only birds that are too small are set aside in order to get them on track to reach the target weight for 10 weeks of age, with some attention and specific feed and water control. Usually this involves about 5 to 10% of the females that you put in a separate compartment. After all, you want the flock to be uniform at the time of transfer, and in the case of light stimulation, all birds must be ready for this in terms of development. Then you’ll have better production. After reaching the target weight for 10 weeks, you put them back in the group. Small males are graded around 5-6 weeks if they weigh less than 1.2 times the average weight of females. Often, 4 different sections are used in a rearing house: 1 for light birds, 2 for normal birds and 1 for heavy birds. If you take 1 light bird from box 2 and put it in box 1, you have to replace it with a heavy bird from box 1, so that the stocking density continues to meet the standards. Rearing problems often become obvious only during the production phase; so, the rearing farmer doesn’t experience these problems. Sometimes a rearing farmer doesn’t want to feed too much (costs money); but, during the last four weeks before transfer, a bit of extra feed is often a good choice for optimal production results.

light animals no dominant heavy birds = less competition = higher feed intake

You start grading as soon as you start the feed control, or just before. The birds select themselves by the difference in speed of feed intake.

Point of no return 15 weeks of age Puberty, i.e. the period of sexual development, is mainly between 16 and 20 weeks of age. It is very important that the females grow sufficiently during this period, otherwise the start of production will be delayed. We aim for a weight gain of at least 1/3 of the body weight in this period. When the females are far too light or too heavy around 14 weeks of age compared to the norm, it is too late to correct it. It is better to make a new growth curve parallel to the recommended curve and to adjust the feed ration accordingly. Forcing birds at this age to reach the target weight will cause problems with production.

average weight normal feed intake

heavy animals no weaker smaller birds = can’t steel extra feed = lower feed intake

By creating different compartments in a rearing pen, you can easily sort the birds from light to heavy. This is an excellent method when labour is not too expensive, and feed and water can be provided separately for each compartment.

4. R e a r i n g f ro m 3 t o 1 7 weeks

59


Feathering and feeding A rough feather cover can be caused by poor feed distribution, and by feed segregation. This means that different feed is offered in the front of the house than in the back of the house, while your goal is to give all birds the same feed and the same quantity. Especially for self-mixers, this is an important point of attention. The protein level in the diet from early rearing between 2 and 8 weeks of age is very important to provide a good feather cover later. This is important for: • Protection against damage (obstacles, during mating, feed competition, pecking). • Regulating body temperature. • Effect on fertility (mating behaviour). • Grip for the males during mating. • Health status indicator. Amino acids important for feather development: • TSAA (Total Sulphur Amino Acids = methionine and cystine) • Arginine • Valine • Lysine

Feather eating Eating down feathers is done to compensate for a possible protein deficiency (especially sulphur amino acids), shortage of fibre in the feed or as a result of an intestinal disorder. You could see birds that are bald around the preen gland. The preen gland contains oil with minerals in it, with which the chickens normally keep their feather cover in good condition. In situations where there is a lack of salt, eating feathers around the preen gland can meet their need for salt. Increase the salt content in the feed.

Stripes in the flag of the feathers are a signal of moments of malfunction during development. These include vaccinations, nutritional deficiencies and so on. Evaluate the past period if you see this in several birds in the flock.

On these feathers you can see stress lines in the shaft of the feather. Seen from the side, you see a ribbed shaft. These are also known as bamboo feathers. The feed is not providing the required amino acids; this could be a formulation problem or birds may be selecting in the feed. This has a long-term impact on the feathering, which continues into the laying period. The amino acids arginine, leucine and valine are also important for feather development. Make sure that the feed contains a sufficient amount of these amino acids, especially at a young age (before 6 weeks of age).

Feathers sticking out? Feathers seem to be sticking out of this bird’s feather cover. It’s a signal of feeding deficiencies or malabsorption. Check and evaluate the feed formulation if this occurs in several birds.

60

B re e d e r S i gnal s


Sexing errors In the final stage of the rearing process, sexing errors become more visible as a result of sexual development. Remove these sexing errors as soon as you see them, as they cost extra feed (and therefore money). In addition, in the case of sexual maturity, they can provide offspring with a different genetic make-up than the one you want. In that sense, one male in a female group will have more effect than one female in a male group. Since one male creates many more offspring. Besides: a male in a female line results in smaller broilers, but a female in a male line may lay somewhat fewer less eggs, but the broilers will be even larger. Around four weeks of age the males already show a red comb, in the females the comb is hardly developed yet. After that, this difference is more difficult to see, until puberty. Sexing errors of about 0.5% is normal, 2% is way too much.

LOOK-THINK-ACT

A brown bird in a white broiler flock? This can be a sexing error in a slow growing breeder flock of conventional white males mated with coloured females. Normally all their progeny should be predominantly white; when a broiler is fully brown it is most likely the result of a brown male and brown female. You can also see that the broiler did not inherit the specific meat characteristics from its father. In a broiler flock originating from conventional white parent females and males it is hard to identify the results of sexing errors.

š

ş A sexing error at 20 weeks age. The larger comb of this male in a female flock is a clear indication. 4. R e a r i n g f ro m 3 t o 1 7 weeks

Leg length is a good indicator of sexing errors. Here a leg of a male (top) and female (bottom) at 13 weeks of age. Use your index finger to check the length.

61


Recognising the sexes Male

Female Males are almost bald under their wings from 16-18 weeks onwards, whereas females still have some small feathers.

Comb and wattles 105 days (15 weeks) More developed and redder in males

Hock joints 140 days (20 weeks) Thicker and broader in males. Narrower and smoother in females.

Feathering around the neck 140 days (20 weeks) Long-fringed, spear-shaped feathers in males. Denser, paddle-shaped feathers in females.

Body shape 140 days (20 weeks). Males longer and narrower. Females more compact and broader around pelvis.

62

B re e d e r S i gnal s


Development of the female From 15 weeks – about 7 weeks before first oviposition – the female undergoes a substantial physiological change. The age of 15 weeks is seen as the point-of-no-return, mistakes made previously must now be accepted and you should focus on the future growth of the birds. Every mistake made here will be paid for later. The reproductive organs are developing rapidly. A weight increase of approximately 35% between 15 and 22 weeks of age is required in this phase as insufficient growth in puberty will delay the start of production. It is important for the birds to be healthy and

fit enough to be able to lay large hatching eggs right from the start. For this purpose the feed supply should increase from 90 to 125 grams per day. In the pre-laying period you feed by bodyweight until a daily egg production of 5% is reached. Aim to achieve the desired weight at 23 weeks. You can control the egg weight by providing sufficient linoleic acid, methionine and cystine, preferably before production even starts. However, make sure not to provide too much lysine, as this will cause breast meat yield to increase considerably.

Assessment of body development The body condition provides useful information about the (sexual) maturity of the female. From the top to the bottom you assess: • Breast meat • Breast bone • Abdomen • Pelvic bones (pin bones)

Feeling the breast muscles.

Feeling the breast bone.

Feeling the abdomen.

Feeling the pin bones.

4. R e a r i n g f ro m 3 t o 1 7 weeks

63


No fat reserve at the extremities of the pin bones, prior to light stimulation. If there is no fat tissue to be felt then this indicates that the female is not yet ready to be stimulated with light.

Different weights When overweight after 16 weeks (> 100 grams above target weight): this flock must be managed very precisely in order to minimise damage (loss of production and reduced uniformity). If you bring the birds to their target weight by keeping the amount of feed constant, you will interfere with the development of the females and the birds will come into production later. Therefore, follow the growth curve parallel to the target weight curve. Never let the birds drop to the target weight because then they will lose condition. This has a larger negative effect on egg production than simply being off of the ideal curve. When underweight after 16 weeks (> 100 grams below target weight): do not try to force the birds to reach the target weight. Also in this case growth must take place parallel to the normal growth curve, so production will just start a little later. This is done by increasing the feed supply slightly, so that the birds gain a little more weight per day. Both situations are undesirable and are a signal of bad rearing management.

Failure to achieve the desired daily growth If the daily growth between 15 weeks of age and the moment of light stimulation is not achieved, the production will be disappointing: • A delayed onset of lay • Small eggs at onset of lay • Increased percentage of deformed eggs • Increased number of infertile eggs • Increased broodiness of the females • Reduced uniformity of body weights and sexual development • Reduced peak production • No synchronised sexual development of males and females

A thin layer of fat over the pin bones indicates that the females are storing fat in the abdominal cavity to prepare for the start of the laying. Adequate fat cover on the pin (pelvic) bones before moving.

64

If the birds have grown too fast between 15 weeks of age and the moment of light stimulation, other problems will occur: • Too early onset of lay • Increased number of double yolks • Reduced number of hatching eggs • Increased feed requirement during production • Reduced peak production, laying persistency and number of eggs • Reduced fertility during entire lifespan (applies to both females and males) • Increased incidence of peritonitis and prolapse • No synchronised sexual development of males and females B re e d e r S i gnal s


Fleshing condition scoring in females Age

Fleshing score 2

Fleshing score 3

Fleshing score 4

Pelvic fat

12 weeks

70%

30%

16 weeks

40%

60%

19 weeks

< 10%

60%

30%

> 65% pelvic fat

20 weeks

< 5%

60%

35%

> 85% pelvic fat

60%

40%

> 90% pelvic fat

21 weeks

0% pelvic fat

In rearing, not only is weight important, but also the development of muscles and fat. For this reason, the development of the muscles must be monitored at regular intervals: If the feed control is too strict, the female has less fat (reserves) in the abdominal cavity. Adequate fat reserves are necessary for good laying persistency.

ᅚ

X

The ‘fat vein’ at the edge of the breast indicates the reserves a female has (top images). This fat gives the birds a good start of production, serves as reserve after week 45, and they are more resilient in facing challenges and stress, such as an IB infection. In that case production doesn’t drop and the bird recovers faster. A pronounced fat vein (bottom left) is a good sign. The fat vein on the right is hardly present.

4. R e a r i n g f ro m 3 t o 1 7 weeks

65


CHAPTER 5:

Puberty (17-22 weeks)

The period between 17 and 22 weeks is considered to be the pre-laying period. This is a very critical period. The birds become sexually mature and are often transferred from the rearing house to the production house. If somebody else rears the flock, always visit the rearing flock to align the rearing and laying period as good as possible. Look at light intensity, light period, water period, feed quantity, feed composition, and so on.

At the end of the rearing period the birds are often transferred to the production house. Do you know all the limitations and possibilities of the new environment? After all, every house is different. Adapt your management in order to achieve the best possible production. In Europe and North America, for example, labour is expensive. For this reason, automatic feeding, water supply, egg collection and climate control are used. In some countries, such as China, Indonesia and South America, the rearing and laying periods often take place in the same poultry house: there, labour is relatively cheap and manual egg collection is used. In combined rearing/production houses, the laying nests must be removed or covered during rearing.

66

Types of production houses Worldwide, there are still many manual egg collection systems. The proportions of the floor areas vary from country to country. In the US you often see slats on both sides and 1/3 of the house comprised of litter (centre of the house). In Western Europe you often see roughly 50% slats (centre of the house) and 50% litter (on both sides).This is just the result of differences between continents in the development of management and housing systems. The houses can be artificially lit, with or without windows or open sided with a windbreak net. Water is available on the slatted floors close to the nest boxes and feed is often on both litter and slats. If the water is also offered on the litter,

B re e d e r S i gnal s


there is a greater risk for floor eggs (the area under the water line feels like a safe zone for the females: no need to go up the ‘tree’). Rarely, breeders are housed in groups in colony cages. These cages are equipped with laying nests, perches and a small litter surface. Breeders may also be housed in conventional cages where artificial insemination is used. This is not common in Europe, but it is common in some other parts of the world with relatively low labour costs. Advantages of a central slat-

100% litter floor and manual egg collection

ted floor are that the male feeders can be placed against the side walls and there is no strict separation between male and females. This improves mating behaviour and results in higher fertility and hatchability. Another advantage is a lower number of floor eggs. With a central litter floor, the females tend to ‘hide’ in the area behind the laying nests. Slats are installed in order to create different elevations in the house. These slats are often made of plastic, but wooden slats are used as well.

Central litter floor and slatted floor on both sides with manual or mechanical egg collection

Central slatted floor and litter on both sides with mechanical egg collection

Female feeders Male Drinkers Manual nests feeding Mating area

Mating area

Mating area

Characteristics of materials for slats

Plastic slats

Wooden slats

Advantages

Disadvantages

+ + + +

Easy to clean Long service life No damage to the foot pads Some types of slats with larger openings have good manure passage and a clean surface.

–

Manure falls through more easily Wood dries faster (but moisture absorbing) Red mite infestation is easier to treat

– – –

+ + +

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

–

–

More manure on the slat surface for some types of slats It is more difficult to combat red mites and get the agent in all small corners Plastic remains moist

Danger of red mites in the T-profile Shorter service life Can damage the foot pads (older slats, and depending on wood quality)

67


Height of slats

Chickens prefer to rest off the ground. A full-litter floor does not offer this possibility. By placing 20-50-centimetre-high slats, you can meet this requirement. High slats may improve leg strength because of the jumping exercise, but they can also increase the risk of accidents, such as bruising, fractures and ruptured tendons, especially if the birds are scared. If you have a high slatted floor it is wise to place an intermediate step or an inclined platform/grid to facilitate access. Higher slats increase the risk of floor eggs. Dwarf females for slow(er) growing broilers are smaller than conventional breeders. So, make sure the slats are not too high!

Daylight houses

68

Daylight house with mechanical (communal type) nests. Water and one feed line on the slats. Another line of feed and feeders for the males is found in the litter area (Cameroon).

Daylight house with drinkers on the slats and manual nest boxes along the walls. For the females there is a chain feeder with grill. The feeding pans for the males are located in the middle of the house (Cameroon).

Husbandry system with various levels and the laying nests relatively high in the system.

This poultry house is too wide. The long distance to the laying nests will lead to more floor eggs.

B re e d e r S i gnal s


Transfer The age at transfer depends on the type of house, and the applied management strategy. For dark-out production houses pullets are usually transferred no later than 21 weeks. In open-sided houses you have to deal with natural day length. This means that you might have to transfer the birds later than at 21 weeks, depending on the season and the natural day length, in order to prevent early light exposure. Delaying the transition always causes extra stress and should never be done later than 23 weeks of age. In addition, never transfer the birds before 18 weeks, at this time they are still in full development and the stress of the transfer can seriously harm future production. Ideally, move the males before the females (the day before) so that they can easily find the feed and water system. However, many producers add the males later, making it more difficult for them to find their place in the house. When planning your transfer, consider this: proportionally your males have much less body fat. This means that, especially in the winter, the house must be preheated well before they are placed to prevent stress. Transfer always causes stress and as a producer it is your task to mitigate this as much as possible. Consider that, even if you are only moving the birds across the yard, to them it is a whole different world; as the trip becomes further it only becomes more stressful. Prevent feed transitions around the transfer. Minimising change is the aim at this period. A single moment of stress can often be taken care of by the bird, but multiple moments of stress will be difficult. As stress increases, disease resistance plummets and intestinal disorders appear. Usually the same pre-lay diet is given for week 16-22.

Make sure that the house layout and climate are as similar as possible to the rearing house. Feeding system, water system, lighting programme and biosecurity should also be as similar as possible. The light intensity should certainly not be lower as this will cause problems as the birds acclimatise to their new environment.

Check the birds for worms in the rearing house, and deworm before transfer. Doing this, the chickens are transported free of worms and cannot contaminate the new facility; the worm eggs are left behind and dewormed birds arrive in a clean house.

Unload the birds, only where water is immediately available. Finding water is of utmost priority for the stressed birds, followed by feed. Ensure that the flock has adapted to any new feeding system within the first 24 hours after transfer. 5. P ub e r t y ( 1 7 - 2 2 w e e k s )

69


Loading reared birds

A net drives the birds towards the exit where a second, smaller fence is made to actually catch the birds.

When loading reared birds to go to a production house, load them carefully. This is also a good moment to remove unfit birds. Fence off a part of the house and load the birds in batches. The birds are not as vulnerable as day-old-chicks. These birds are often transported in open trucks, but increasingly in closed trucks in order to control the climate. Especially in extreme climates (hot or cold geographic regions). Often males and females are transported at the same time. So similar to day-old-chicks: make a good loading plan for the truck. First load the females, since the males have to be unloaded first in the new poultry house. Sometimes in a separate section of the house.

Chickens are fenced off in a small area at the end of the poultry house where they are put in transport crates.

The transport crates serve as a wall for birds to walk out of the house. As soon as a trolley is full, a new trolley with empty crates replaces the full one.

This is considered an open truck, since there is no climate control. The tarpaulin prevents direct air flow when driving. But when standing still, the temperature can rise very fast. So unload directly after arrival. 70

More than 80% of the birds will jump out when you put them on or near the slats with the doors open. Avoiding the additional stress of grabbing them and pulling them out gives them a step up. B re e d e r S i gnal s


Arrival in the new house

If you use crates, open them and tip them over. The hens will get out by themselves and find the water. The crates form a wall to keep the birds on the slats for a while.

After an hour or so the crates can be taken away and litter can be added. Slowly but surely the birds will enter the litter area.

For the reception of birds in the production house, red light could be used to keep the birds quiet. This should not routinely be done, but only in case of problem flocks.

The red light is created by red foils that are gradually removed. Nowadays with multicoloured LEDs you can easily mix your own colours.

After the birds have become accustomed, the light intensity can be increased, so the birds can investigate the surroundings, thus preventing floor eggs in the future. The feeding lines are lowered.

In this house litter pellets are used. After a few days they fall apart and create a thin layer of litter.

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

71


Drinking without water? If the birds are very thirsty, they will drink en masse and press the edge of the drinker. Because the filling valve of the drinker reacts to the weight of the water, it seems as if there is enough water and the water flow stops. Ensure sufficient supply capacity (limit competition around the water system).

Low stocking density (< 6 birds per m2) Advantages

Disadvantages

+

–

+

+ + + + +

Improved mutual recognition of males and females More successful mating, more mating behaviour, and more voluntary mating. Females try to escape less often during mating. Higher fertility -> more day-old chicks per breeder. Lower mortality. More hatching eggs. Positive effect on the profit/bird.

–

–

Inefficient use of expensive poultry house. More energy necessary for maintaining standard temperature. Lower output per square meter (eggs, chicks).

Stocking density A correct stocking density helps to keep the flock uniform, reduces differences in sexual maturation rate and helps to achieve good physical condition and overall reproduction. After 140 days (20 weeks of age) the stocking density should be reduced and the feed/water space increased as the birds become larger. In Europe, stocking density is 6.5-7.7 birds (males and females) per m2. In the rest of the world this is often lower at 3.5-6 birds per m2. The stocking density depends on: • Welfare legislation • Economics • Environment (climate) • House type • Equipment (water system, feeding system, laying nests, ventilation)

100

Effect of stocking density on fertility

95 Fertile eggs (%)

L LOOK-THINK-ACT

90 85 80 75 26

29

32 39 Age (weeks)

44

53

stocking density 8.8 birds/m2 stocking density 5.2 birds/m2 A lower stocking density results in a higher percentage of fertile eggs, but from an economic point of view this is not a direct trade-off.

Slow growing breeds and stocking density Since dwarf females for slow(er) growing broilers are smaller, they require less space. Therefore, when allowed by legislation, the stocking density could be increased with about 10%.

Houses with relatively low stocking density create sufficient room for mating behaviour. 72

B re e d e r S i gnal s


Feed around transfer In some countries the birds are only given half a portion of feed, or even nothing at the day before transport. This is in the interest of the transporter, because the crates remain cleaner. However, this must really be less important than the welfare of the birds. In order to prevent the birds from experiencing too much stress, they should be given a full day’s supply of feed before transport. By giving a normal amount of feed the day before and on the day of transport, the birds are better able to cope with the transport challenges. The birds should not be fed on the morning of the transport itself, but the feeding facilities in the production house should be fully filled so that the birds have immediate access to feed on arrival. It is only on the first or second day after arrival that the feeding level must be brought back to normal. The amount of extra feed you give depends on the season, ambient temperature and the duration of the transport. If the birds have to wait a while in the new house before getting fed (because more birds have to be brought), switch off the lights or dim them. Keep a close eye on the birds. They are stressed and hungry, so they might start pecking at each other. The feed intake of the females should increase from 130 grams to 150/160 grams per day at 25 or 27 weeks of age (depending on age of stimulation: 21 or 23 weeks of age), to the peak feed supply of 165-170 grams around 27 to 29 weeks of age.

After transfer, check the crop fill of both males and females to see if they are able to find feed and water. Do this on the day of transfer, 30 minutes after the first feeding period and then again after 24 hours. Check at least 50 males and 50 females. The bird on the left has an empty crop and the bird on the right a full crop. Determine the cause if not all birds have a full crop (insufficient feeding space, insufficient feed distribution or insufficient availability of feed).

Check the time it takes for the water to get to the back of the house. A good rule of thumb: the water should be in the back before you can walk there at a normal pace.

After about two hours to get accustomed the feeders are let down.

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

73


Separate feeding Tip Feed in the dark or immediately after the light is turned on. This prevents unrest, because the birds are used to this during the rearing period.

Females are fed separately by excluding the males using a grill or roll above the females’ feeding system. The height of the roller tube is adjustable between 40 and 50 mm above the trough, so that the males cannot reach the females’ feed.

The feeding system for females can be placed in high traffic areas of the house (slats, litter area).

Males and females are fed separately, as both their needs and genetics differ greatly. Males have a lower requirement for protein and calcium than females, and often get a lower energy value in the feed as well. Sometimes males get more vitamin E and selenium to support fertility. By feeding separately during the laying period there is better overall control of body weight and uniformity of both sexes. This has a positive effect on fertility, especially after week 50. Around week 26, no male should be able to eat from the females’ feeding system, since males tend to overeat, especially at the start. This increases the weight considerably, which affects general condition and fertility. This can also lead to leg problems, especially after week 50. One possibility is to first turn on the lights for 5 minutes in order to give the birds the opportunity to spread through the house. Then switch the lights off and fill up the feeding system. If you feed directly after turning on the lights, the birds have a tendency to sleep close to the feeders, creating a barrier for the birds on the slats.

When distributing the feed, the high speed of a chain feeder (30 m per minute) prevents the feed from being eaten. The birds cannot eat selectively in a spiral feed system and the feed does not accumulate. This stimulates uniformity.

The males are usually fed far away from the laying nests; this ensures that the area around the nest boxes remains peaceful. So either at the side of the house (left) or in the centre (right), depending on the system used. 74

B re e d e r S i gnal s


Excluding males At the age of 20 weeks you must exclude the males from the female feeders. Reducing the feeder opening to 45-47 mm width x 60 mm height is then necessary. It is not a problem if the females can still eat from the male feeding system in the first few weeks and vice versa. Early in the cycle smaller males could use some extra feed. There

š

are grills that you can adjust, but be diligent with your maintenance; old metal grills are often rusted up because they weren’t adjusted frequently which makes them useless. Don’t choose a grill that’s too narrow, otherwise you might even rule out the females at some point.

ş

The main distinction between sexes for feeding purposes is based on the differences in comb size and/or head width and the difference in body height. The male’s larger comb prevents him from accessing the female feeder.

When using separate feeding systems, both males (right) and females (middle) must be able to eat all at the same time. If they don’t eat at the same time, the males can cause a lot of unrest amongst the females.

This male feeder hangs too low, the females can reach it as well.

Exclusion system with a roll bar. The females can put their heads under the roll bar, the males can’t.

The main differences in the feeding systems. For males, there is an exclusion system (left: a grill) and the males are fed at a certain height (50-55 cm, right), which the females can’t easily reach. 5. P ub e r t y ( 1 7 - 2 2 w e e k s )

75


The males must be able to eat from the feeding system with their feet flat on the ground. So this is the image you want!

Use the male feeding system right from the start. Adjust the height of the male feed system after 3 weeks, so that the females can no longer eat with them.

Slow growing breeds and male exclusion Dwarf females for slow(er) growing broilers have access to feed almost the whole day. They actually need to be stimulated to eat enough by providing several meals during the day and to let them completely clean-and-empty the feeding system once a day. The fact that there is feed all day in the feeders of the females allows the males to steal feed the whole day. This means that a good male excluding system is even more important.

Another way of excluding males is by using a peg through the nostrils so they can’t stick their heads through the grill. In a lot of countries this is forbidden because of bird welfare and is certainly not a recommended method.

Heavier males are less effective

96 94 92 90 88 86 84 82 80

5,000 4,000 3,000 2,000 1,000 0 31-40

41-50 Age of males (weeks)

Fertile eggs (%)

6,000 Body weight (g)

Males eating the females ration should not become commonplace. This takes feed allocated to the females; your calculated ration then becomes meaningless. You’ll see reduced growth and production without showing any indication of a lack of feed intake. This isn’t any better for the males; this extra feed will push them to become overweight. Heavier males have more problems with their balance during mating, due to heavier breast muscles, causing more mating failures.

Difference between separated feeding and non-separated feeding

51-60

separated sex feeding

line = fertile eggs

non separated sex feeding

bar = body weight

If fed together with the females, males will grow too much, with the result that fertility will decrease significantly after week 50.

76

B re e d e r S i gnal s


Getting used to systems It has been mentioned before, but be careful when the systems in the rearing house are different from systems in the production house. For example, if the birds have to switch from spin-feeding in rearing to chain feeding systems during laying, the new feeding system should be placed very low at first so that the birds can look into the system and see the feed easily for 1 or 2 days. Crop filling indicates whether the birds have indeed been able to find the feed.

Head width of females and males (mm) Age (weeks)

Females

5

26

Males 28

10

30

36

15

42

44

20

43

46

25

44

47

30

45

50

35

46

55

Adjustable feeding pan. The width and height of the openings can be adjusted according to the head size of the birds to ensure separate feeding of males and females.

In order to prevent males stealing from the females, the final part of the grill is covered with a metal plate. 5. P ub e r t y ( 1 7 - 2 2 w e e k s )

Males stealing the female feed. The chain feeder should be covered at this point. 77


ᅚ Incorrect position of the roller bar. Too high, so no excluding effect.

Correct position of the roller bar. The females can reach the feed, males cannot.

These male feeding pans are all pushed sideways. Make sure the pans are properly installed and if they are pushed out of position, try to find the cause. It may be due to a fight for feed (poor feed distribution, too little feeding space, too little feed?).

If males try to eat from the hens’ feeders (through the small grill) they may damage their heads leading to infections. The reason is probably that this is a submissive male that is not allowed to eat with the other males and therefore tries to get feed from the female feeders.

A simple solution if the chain is moving too slow. Cover it, let it fill up and lift up the PVC pipe. There are also commercial systems that use this principle.

78

B re e d e r S i gnal s


Drinking water Check the water intake of the birds every day (water meter). A short period of water shortage can quickly manifest itself in a sharp drop in production. Too little water over a longer period of time or too much water restriction will have a negative influence on the egg size, among other things. Some breeders are relatively slow eaters and therefore relatively slow drinkers as well. If you control the water intake too strictly, this can have an adverse effect on certain physiological processes. Birds normally drink after eating, so make sure the capacity of the drinking system is adequate for this peak. Even if you have sufficient water available for a day, if you can’t meet the demand at the peak it will still have negative effects. A rule of thumb is that capacity should be 80 to 100 ml/minute for nipples.

L LOOK-THINK-ACT

Why does this bird have a black beak? The black beak is caused by pecking at manure. This bird pecks at caecal manure because it can’t find any water. In cases like these, it often helps to push the bird’s beak into/against the water system. It’s also a good idea to check that the drinking system is working properly.

If chicks can’t drink enough, they might push and turn the bell drinker. You see that the drinkers are not nicely lined up anymore. Try to reduce drinking stress.

The birds drink too eagerly as they are afraid of missing out. This results in more spillage, resulting in a wet neck/breast. This often happens when the period of water supply is too short.

Newly arrived birds sometimes can’t find the drinkers and will look for alternatives. Like here condensation at the edge of the house and moisture under the slats... you have to actively pick these birds up and teach them how to drink. 5. P ub e r t y ( 1 7 - 2 2 w e e k s )

79


Feather sucking and feather pecking

Females not only strip their own feathers, but also tail feathers of other birds. With controlled feeding you see more feather sucking. Usually sucking stops when feed supply is increased to around 140 grams.

In broiler breeders you often see that the birds suck their (tail) feathers between 15 and 25 weeks of age, which does no harm. The fat from the preen gland with which the birds rub their feathers is a bit salty and the females like the taste. Another explanation is that 90% of the dust in a poultry house consists of protein, precipitating on the feathers. So feather sucking (or feather stripping) may indicate a nutrient deficiency. Feather sucking may lead to feather pecking, pulling or a general deterioration of the plumage! Broiler breeders are much less aggressive than laying hens. Feather pecking is therefore much less of a problem in breeders. Pecking can be caused by boredom and stress, and is abnormal behaviour that is difficult to unlearn. From the beginning, take steps to prevent abnormal behaviours from developing. If you can’t feed immediately after unloading, turn off the lights. In the dark, the birds are calmer. By making the lights dimmable you have a backup system in the rare case of pecking. With untreated beaks, dimming the light helps to keep the birds calm.

This female has soaked tail feathers caused by obsessive sucking. Obsessive sucking is deviant behaviour. See if it occurs in more than one bird, because in that case it is a flock problem.

Pecking is often directed at the tail feathers and cloaca. This could be the start of cloaca damage or even cannibalism.

80

Distraction materials keep the birds busy and have value in themselves: fibre from straw (left) and minerals from a pecking stone (right).

B re e d e r S i gnal s


Synchronous development Postpone mixing for 7 to 14 days if the sexual maturity has not yet been reached, or if the birds have been moved from a dark house to a house with an open side. The best fertility results are achieved when the males and the females become sexually mature at the same time. If the males are sexually mature sooner, their attempts to mate may cause the females to become afraid of the males. Males who mature later, run the risk of being bullied by the older females resulting in males that don’t dare to mate. They won’t recover from such ‘psychological castration’. If the males are more mature than the females, you place fewer males in the beginning. For example, 1 male per 20 females. Gradually add more males after 14-21 days. If the males are not properly uniform, only place the mature adult males. This can be judged by the size of the comb and the colour around the eyes: the redder the better. Add the other males as soon as they mature. Separate housing for males is therefore a basic requirement of a professional breeder farm! Observe the behaviour of the males and females constantly.

The females sit on the slats and avoid mating; they do not mix with the males in the litter area. There are too many aggressive males or the males were sexually mature much sooner than the females. If this is the case just before the light goes out, when mating should take place, intervene by reducing the number of males.

Aggressive dominant males tend to mate much more roughly. When mating, the males grab the females with their beaks firmly by the neck feathers. They can cause damage very quickly. With their legs they can also damage the feathers and the skin on the body. In that case, feather damage is caused by rough mating and not by pecking.

When males mature a little later than the females, the males are sometimes frightened by the females in the beginning. On the other hand, if the males are too far along in development compared to the females, the males are then too dominant (in development or wrong ratio). Males and females must be mixed and be in the same stage of maturity.

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

81


Maturity of males Importance of males There often is too little attention given to the males. Although less than 10% of the birds, they are responsible for 50% of the result in each broiler chick! Even more if you realise that one hen might produce 175 eggs, but one male is responsible for 2,000 hatchable eggs, so you could say that a male is 10 times more important than a female.

Monitor the maturity of the males carefully. Besides physically fit, the birds have to be mentally fit in the sense that they should have a dominant attitude. To ensure that the males function optimally and produce good sperm, the following is important: • Good weight control • Select regularly • A dominant attitude

Immature male with an underdeveloped comb and wattles that are pale in colour.

A sexually mature male has a well-developed comb and wattles that are nice red in colour.

This male has been attacked, probably because the females don’t respect him. This male was sexually mature too late and the females are in charge. This male will be afraid to mate. Remove this male from the flock.

The colour of the comb and around the eyes is a good indicator of the quality of the males. On the left a non-active male, on the right a good male.

82

B re e d e r S i gnal s


Separate male house Males normally come directly from the rearing farm (at the age of 20 weeks) and are mixed with females. But the males are never all mature at the same time. There are always males that are in the lead and males that develop more slowly. By placing 20-50% of the males in a separate male house for some weeks, you can add the more mature males to the females in stages. Introduce the males to the production house within 10 weeks or keep them separate as spiking males. When you have the option of gradually introducing males you can start off with a relatively low percentage. At first 6-7% is more than sufficient. Later on, relatively more males die than females (competition and aggression among males), or males are taken out (grading). Roughly 30-40% of the males don’t make it till the end. Of these, one third is due to grading/selection and two-thirds due to mortality. In females it is much less: about 7-8% mortality and 1-2% due to selection (so total cull rate 8-10%). So you have to add males in order to have sufficient numbers remaining towards the end of the production period. However, this can be counterproductive if not managed properly. Males might fight each other after introduction, females get frightened of the males. Take behaviour and competition of males as a reference and adjust your management to that. It is labour-intensive to select the mature males to be moved to the production house, but it has many advantages. The mature males, for example, can no longer eat with the females because they have grown sufficiently. The remaining males in the male house are also more likely to develop when the dominant males are gone.

Separate male house, make sure the equipment is similar to the production house.

L LOOK-THINK-ACT

Percentage of males per age group Age

Percentage of males

18 weeks

10%

20 weeks

9%

30 weeks

8%

The percentage of males depends on age and quality. You start with 10% males. If at the age of 30 weeks there are 8% good males in the flock, you still have plenty of opportunities not to have to add extra males. 5. P ub e r t y ( 1 7 - 2 2 w e e k s )

Which male would you prefer? Two males of the same age. They look quite similar, but the one in the back is still white around the eyes. This male is not fully mature yet. The other one is nice and red. But you don’t necessarily have to take the less developed male out of the flock, he might still develop further and be very useful. Don’t be to picky!

83


Ratio of males to females

It is not easy to assess whether the ratio in a production house is correct. The best way is by simple counting. If you know exactly how many birds you have put in, and keep records of changes of both the males and females (mortality, selection, etc), you should know the exact ratio.

If you don’t have a separate male house, you often start with 100 males for 1,000 females, and this can gradually be reduced. At the beginning of the laying period, poultry farmers sometimes keep a ratio of more than 1 male to 10 females. Too many males can lead to more fighting, more aggressive behaviour towards females and can have a negative effect on fertility. Often the ratio of males to females is used as a guideline, but in fact it is all about the density of males. So the number of males per square meter, since males are territorial. The higher the number of females, the lower the actual percentage of males. After feeding time you are able to assess this, that is the time for mating and at that moment you might see aggression.

Rough mating If there are too many competitive males, mating damage on the females will become more of a problem. Males with untreated toes, because of sexing errors or missed at the toe treatment, will aggravate this.

84

The nail on the back toe of the male is removed to prevent damage to the females. In some countries this is no longer permitted.

Damage to the flanks of a female caused by insufficient feeder space and rough mating.

Treated toe of a male around maturity.

Sharp untreated toe in a mature male. It is either a sexing error or it slipped through in the process of toe treatment. This can cause great harm to females.

B re e d e r S i gnal s


Male management Lower fertility and therefore lower hatching results cause a significant decrease in the efficiency of the entire broiler meat production chain. In nonintegrated production columns, if hatchability is too low (< 80%), the flock farmer sometimes gets a price penalty on the hatching eggs delivered or receives a bonus if the average exceeds a certain value (> 80%). Although this is only in the range of tens of cents, if you have house with 20,000 broiler breeders, this will add up to thousands of euros. Observation rounds in the production house in the afternoon create movement in the flock which gives the males more possibility to mate. If you do this frequently, you can also intensify and improve grading. Particularly after 40 weeks of age, the number of males which no longer mate increases. In the morning, when collecting floor eggs, this does not have much effect. But in the afternoon, about 10 hours after lights on, when males should be sexually active (after laying time) stirring them up a bit by walking through the house is most effective. In addition, with frequent control moments, equipment malfunctions are observed earlier, minimising preventable flock disturbances later on.

This male is hiding in a nest. This is a signal of psychological castration: the male is anxious and will mate less. Usually it will not even mate at all, so remove this bird.

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

In front a well-developed male with nice comb. Close to the slats a subdominant male, with smaller comb and hunched up posture.

Observation for selection of your males should be done daily especially with regard to external characteristics: legs, feathering, comb colour and weight. When picking them up, watch carefully; the cloaca should be moist and red, and should not be too heavily feathered. The hocks should be red. 85


4 old feathers

3o

Maturity of females

ld f

eat

her

s

The characteristics of mature females at first sight are in a way similar to the males: comb size and comb colour and feather development (moult). But the body confirmation changes as well from a slender young hen to a full bellied female. And of course the development of the pin bones are a good indicator of the degree of maturity.

You can check wing feathers development of breeders at 19 weeks. Birds moult their wing feathers from the inside out. On the wings you want to see a maximum of four old feathers left (old = sharp tip, new = rounded tip). However, for modern broiler breeders it is not a very good indication of the sexual development of the birds. It is more commonly applied in laying hens were it is still a good indication and management tool for the age of light stimulation. Use the number of wing feathers always in combination with moulting stage of all feathers (neck, thigh and back) on the entire animal. A total equal feather development on all parts of the birds gives you an impression of the uniformity of a flock. You have to adjust the light stimulation to that!

Immature female with an underdeveloped comb and wattles.

A sexually mature female has a bright red comb and wattles.

Different comb quality in females: on the left a nice, redcoloured comb, the one on the right is pale and less well developed. She could be ill, for example suffering liver degeneration.

Development towards maturity

During puberty, body conformation of the female changes significantly. On the left a female of 23 weeks old. She is still slender. On the right a female of 27 weeks old, she developed much more abdominal fill (development of reproductive organs).

86

B re e d e r S i gnal s


Pin (pelvic) bones spacing The conformation and shape of the pin bones changes during the pre-laying phase. The space between the pelvic bones gets bigger and bigger under the influence of reproductive hormones, until the moment of laying. Measuring the space between the laying bones gives you information about the female’s sexual development. Perform this measurement regularly between 20 and 23 weeks of age (140-161 days). Preferably every time you are in the poultry house, but at least once a week. You don’t have to assess this on a lot of females to get a good picture of what is going on throughout the poultry house. You can also hear the flock ‘singing’ when they come into lay. Some females will crouch, as they would do for the males. If the pin bones are not yet spacious enough when you want to stimulate with light, or

if there is a big difference in space between the pin bones between the females, then you have to postpone stimulation. It is good practice to have 80% of the flock with a 4 to 5 cm pin bone spacing when starting light stimulation. Manage the flock in your house not the one in your plans! Space between the pin (pelvic) bones by age Age

Space between the pin bones

84-91 days

Closed

119 days

1 finger

2 cm

21 days before the first egg

1.5 fingers

3 cm

10 days before the first egg

2-2.5 fingers

4-5 cm

Point of lay

3 fingers

6 cm

Your fingers are a good indicator. But realise that in some countries in Asia and Africa the daily care is done by women with thinner fingers. In that case this table is not appropriate!

The birds have arrived at the point of lay when the space between the pin bones measures 3 fingers (that is about 5-6 centimetres). On the left still too small, the image on the right shows the preferred width (3 fingers).

Because finger sizes vary, it is recommended that the same person measures the space between the laying bones each time. Or to ‘calibrate’ your fingers e.g. know their size. In this case two fingers are either 2.8 cm and 3.7 cm!

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

87


Light programme Chickens naturally reproduce seasonally and lay their eggs in spring. The trigger is the lengthening of the days. Although this light sensitivity is decreasing due to further genetic improvement. In pure laying breeds, the stimulus from light is reduced and body development is more important. Broiler breeders are bred for meat and less for laying performance, which is why they are more sensitive to increasing day length. Light stimulation or perception of daylight is therefore just as important as feed intake. The age to extend the day length from short (8 hours) to long (between 13 and 14 hours) depends on the average body weight of the flock and the uniformity of the flock. Weight gain in combination with absolute weight are the main criteria. A shorter day length might result in floor eggs (laying in the dark) but also saves energy consumption (= feed) by the birds. In most cases it is not recommended to start light stimulation before 20/21 weeks of age. For flocks that are below their target weight, or that are not

LOOK-THINK-ACT

uniform (CV more than 10%), postpone the light stimulation for a week or more. Not only females are stimulated, males as well. For females 6, 8 or 10 hours doesn’t make a lot of difference, From 10 hours onwards sexual stimulation really starts. Males are more sensitive. When males and females are kept in one house, you could stimulate sexual development of males when you have 7 hours of light, while for the females nothing changes. This has a natural cause: in spring, the male has to be ready before the female, so the first eggs are fertilised directly. Adjustment with rearing Align the lighting programme between rearing and production farm. When in doubt about the light intensity and/or day length, do not take any risks. An additional increase in light intensity is much less disadvantageous than a decrease in light intensity. Adjust the light intensity of coloured lighting sources. The light stimulus must be recognisable to the bird. Extend by at least 2-4 hours and at least double the light intensity. Preferably even a fourfold increase in light intensity. Increase the light intensity together with day length to allow the females and the males to slowly get used to each other. But be aware of pecking: during light stimulation there is still controlled feeding, so the birds are not satiated yet. Decrease light intensity again once you observe pecking (but not the day length...).

Lux and footcandles

Darkness The lights are dimmed here, but even if you turned them off, the light still comes in through the ventilation valves. This disrupts the synchronisation between weight development and light stimulation. Close all openings and cracks. Rearing houses must be 100% lightproof, no trace of light may enter. Follow the lighting programme carefully and adjust it where necessary.

88

The SI unit for brightness is lux (metric system). This is the light intensity that falls on a certain surface. As light spreads, its intensity decreases as the light source gets further away from the surface to be exposed, but the total surface area that becomes lit increases. For a good measurement you do not measure close to the light source, but at the level of the object to be illuminated. In some countries the unit ‘footcandles’ is used (imperial). 100 lux equals 9 ftc. On lamps, the luminous intensity is indicated in lumen. That’s the brightness at the source. 100 lux = 100 lumen/m².

B re e d e r S i gnal s


Do not stimulate the birds too early with feed and light to start laying. Certainly not in a non-uniform flock of birds. Then you will have a considerable number of birds that are not ready (too light, too little fat reserve). This type of flock decreases quickly in production towards the end of the laying period (poor persistency). A large number of eggs at 30 weeks is therefore no guarantee of many eggs at the end of the laying period. The sexually adult birds divide their nutrients into a part for maintenance, a part for growth, and a part for egg production. The birds that do not lay yet divide their nutrients for two purposes: maintenance and growth, which will result in undesired weight gain and increase in body fat. The lack of uniformity is thus exacerbated. The increased weight gain (breast meat) results in a higher demand for maintenance, resulting in lower production. Stimulate the birds only when they are physically ready (sufficient development/weight), if necessary, wait a few weeks. Even better: when 95% of the birds are ready (BW uniformity is also important). Day length In spring the females mature faster than in autumn. Despite a house that is perfectly dark, the birds ‘smell’ that it is spring. An important point of attention is therefore that the males must be on their target weight as well. In autumn, the females are naturally more difficult to stimulate. Therefore, adapt the management to the season by building up the lighting schedule faster in autumn than in spring, but not by starting earlier (as some do).

Effect of light stimulation at different ages 120 days

140 days

160 days

Age at maturity (days)

173

175

182

Weight of 1st eggs (g)

44.1

45.5

45.4

Number of chicks

119

133

127

For the highest number of hatching eggs, the optimum age for light stimulation is between day 140 and day 160.

Effect of start of stimulation on laying curve stimulation too late: delayed and lower peak

Production (%)

Do not stimulate too soon

correct timing of stimulation

stimulation too early: slower getting to the (lower) peak, lower persistency

Time (weeks) If laying is stimulated too early or too late, the birds will produce fewer hatching eggs. If they start laying too early, they will drop off quickly in the second half of the production (poor persistency) and if they start too late, the production curve will shift altogether and you will also have fewer eggs for hatching.

Light stimulation (Europe) Advice 2015

Advice 2020

20 weeks

8 hours

8 hours

21 weeks

11 hours

8 hours

22 weeks

12 hours

10 hours

23 weeks

13 hours

11 hours

24 weeks

14 hours

12 hours

25 weeks

14 hours

13 hours

26 weeks

14 hours

13-14 hours

The advice for light stimulation has continued to develop over the years. The tendency is to stimulate a bit later. The result is that birds are more mature. This means fewer small eggs at the start and the time to peak production is shorter. Peak production is even higher.

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

Overstimulation with feed might lead to increased mortality. This is caused by a higher risk of double yolk eggs, causing prolapse which triggers vent pecking. You often find victims in the laying nest where they try to hide from their attackers.

89


Natural light The advantage of using natural daylight is that no power is required. However, being entirely reliant on the sun means that you have no control over the length of time the birds are exposed to light. When using natural light it is best to open the curtains after 30 weeks 14 hours of light is generally advised, 15 hours is still OK, but: 16 hours of daylight is not recommended because the females are less persistent and the fertility and hatchability is worse later in the cycle. Another big disadvantage of curtain houses is the difficulty in maintaining sufficient heat in a cold season. This house has the option of allowing sunlight to enter the house (and closing it). Sunlight stimulates comb development and thereby male fertility. The combs have a much darker red colour. In some countries having natural daylight in the house is required by law.

Different light sources If the reared birds are used to red light from an incandescent lamp and get fluorescent light in the production facility, they may have problems getting into production. This is because fluorescent light gives less red light and red light has a positive effect on the development of sexual maturity. Yellow/red coloured light brightens the colour of the red combs. The colour of the comb is an indicator of health and in the selection of males. This is not easy to assess in the case of the use of red light.

Slow growing breeds and stimulation Dwarf females for slow(er) growing broilers require a different approach regarding stimulation. The females need less stimulation in order to get into lay. The light programme is more like for laying hens: a slow stepdown programme.

At night, the birds should all be roosting on the slats.

Ideal increase in day length is from 8 hours in rearing to 13-14 hours during the laying period 11-12 hours •

•

More floor eggs, broken and dirty eggs (hens lay eggs before the light is turned on) Females heavier at 60 weeks of age (less exercise)

13-14 hours • • •

Faster to 50% production More eggs due to an early start of production More mating in the afternoon and therefore better fertility and hatchability

15-16 hours • • • • •

Less persistent production Worse sperm production Results are worse (egg production) Higher feed intake Lower fertility and hatchability

Fertility and hatchability rates from birds that get a maximum of 14 hours of light is about 3% higher than in birds that get a maximum of 16 hours of light. In addition, due to the shorter day length, the birds are more active throughout the day and the shorter day length results in more than 10% lower energy consumption (and thus lower feed consumption!). However, you should never shorten the day length during the laying period.

90

B re e d e r S i gnal s


Light intensity and floor eggs Increase the light intensity at the same time as you extend day length. There is no difference in egg production between 5 and 500 lux, but the light intensity should be between 30 and 60 lux at bird height, so that the females will use the laying nests (slightly darker environment) and therefore there will be fewer floor eggs. In addition, increasing the light intensity stimulates the males to become sexually mature, increasing the percentage of fertile eggs. Determining the brightness is always about finding the right balance. An increased light intensity has a lowering effect on egg weight. This is caused by the fact that the females move more when the light intensity is increased, and therefore have a higher energy requirement. Modern poultry houses have at least high frequency fluorescent light and increasingly LED lights. LED is getting cheaper every year and requires much less energy and has a long lifetime.

Dimmable LED lighting, the colour of which can be adjusted. Red light is used to keep the birds quiet and prevent feather pecking.

5. P ub e r t y ( 1 7 - 2 2 w e e k s )

Of the 13 hours of light, the first 10 hours are the most effective. Give plenty of light during laying (morning) and dim in the afternoon by the time birds get bored and restless (pecking). This is called dimming after lay. In this house there are several lighting systems installed in order to adjust the light intensity and colour.

91


CHAPTER 6:

Onset of lay (up to 5% production)

The period from the first egg to 5% production aims to stimulate the females into lay with light and feed. This is the period where you have to be very alert to prevent floor eggs. In this period nesting behaviour can be stimulated or spoiled. It is very hard to correct hens once they prefer not to use the nests. The bird follows its natural behaviour. All you can do, and have to do, is to facilitate the bird to mutual satisfaction.

Originally, a chicken laid eggs for consecutive days in a row, after which she would start brooding. This is like all other fowls. In the modern breeds the hens are selected to produce one egg every day for as long as possible. A series of eggs without interruption is called a clutch. The fewer days without an egg the higher the total number. In a flock the percentage of production represents the hens which have started laying. The more all birds are synchronised the sooner the flock is in peak production. When you notice a slow start that informs you that the flock is uneven and you can expect poor

92

production since the birds differ in readiness for production. Try to figure out why your flock is coming into production so slowly and act accordingly. At least learn from it for the next flock.

Tip Open the nests some hours before lights on to prevent the nests still being closed when expanding the light period. When the birds are asleep, they won’t go into the nests anyways.

B re e d e r S i gnal s


Laying nests Make sure that the nests are freely accessible, well visible, and the water system is close to the nests. Before the females start laying eggs, they must have had the opportunity to explore the nests. An ideal nest is closed from above (chickens have an instinctive fear of birds of prey), has an illuminated entrance (to allow birds to ensure the lack of snakes or other predators), no draught on the nest and has closed areas (behind the flaps). Around peak production it is busy at the laying nests. Make sure you have enough nests available to prevent floor eggs. The standard for a communal nest is a maximum of 45 hens per linear metre of laying nest. When using a double row, it is 90 hens per linear metre of poultry house. In the case of individual nests take five hens per nest as a guideline.

Water close to the nest, to attract the hens and a closed area behind flaps.

Just before the birds start laying, they should be given the opportunity to explore the laying nests.

Do not open the nests until the females have crouched voluntarily, or you find the first floor egg. With a bit of imagination you can see a heart shape. So, open them at the moment the first egg is expected, usually about 10-14 days after the start of light stimulation.

The ideal laying nest

Slope to back

Place the nests in a quiet place (centre of the house). Make sure the entrance is spacious enough so that the hen can easily step in, turn around, and step out. The entrance must be solid and well fixed. 6. O n se t o f l a y ( u p t o 5 % pro du cti o n )

93


Eat-drink-oviposit Normal behaviour is EDO: Eat-drink-oviposit. Keep this in mind when you open the laying nests. In any case, they must be open before the lights are switched on.

With this drink cup, the birds drink in small groups, leaving space in between the cups to pass.

ᅚ A single drinking line forms a wall, depending on stocking density. Females that would like to lay an egg will not be able to pass, resulting in floor eggs.

Double drinking line with parts were there are no nipples at all. This allows females to move to and from the laying nests, while others are still drinking.

Individual nests are still used in many houses worldwide. These are mostly old types, with mainly manual egg collection (left). Most houses have automatic group nests (right) where the eggs roll away immediately after laying. The advantage of this is that the percentage of floor eggs is low, with better egg hygiene. This improves the quality of the chick.

94

Check whether the mats in the laying nests are not worn out. An egg should easily roll away once released. Just take an egg and check it yourself.

B re e d e r S i gnal s


Egg laying behaviour

Development of the reproductive tract

Make sure the young females feel safe in the nest. In nature, the moment of egg-laying is one of the most vulnerable moments in a day. This is also the case in the breeder house because, during laying, other females can peck at the bulging cloaca of the egg-laying hen. This is especially the case with young hens that get a little too fat. Make sure that the nests are a little darker than the rest of the house. A bird does not visit a nest to lay an egg! She is looking for a nest since she had an ovulation 24 hours ago. Thanks to that you will not have abnormal eggs, for instance shell-less eggs, in the nest. These eggs are found where the birds rested. In slatted floors it is the dropping pit. These eggs are usually not noticed and escape attention. Lower than expected egg production can be due to abnormal eggs. Make sure that in houses where the birds are both raised and produced (day old until death) the nests are closed/covered during the rearing period, because otherwise the hens will see it as a resting place and will no longer be interested in the laying nests by the time they have to use them.

More protein and amino acids in the feed are important for the development of the reproductive tract. Switch to laying feed at the latest at 5% daily production. 5% Production should be around 23/25 weeks (depends of moment of light stimulation). During the production period, feed intake is slightly controlled to prevent large increases in body weight. Too much feed can cause reproduction problems. Controlled drinking can also be applied, but if the birds were given unlimited water during the rearing period, this must also be applied in the laying period. You can influence the egg weight by stimulating the females a little later. The egg weight depends on the age of maturity and the weight of the female: low hen weights and early maturity produce small eggs; high hen weights and late maturity produce large eggs. This is easy to manipulate in advance, but not afterwards.

Slow growing breeds and laying Dwarf females for slow(er) growing broilers lay more eggs than conventional breeds and tend to lay more all at the same time in the morning. Make sure there is enough laying nest capacity: 40 females per linear meter laying nests (80 in case of double-sided central nests).

You often find more shell-less eggs at the start of production. They are usually laid at the end of the day due to flock disturbances. Be wary of disturbances as the hens are settling down in the evening. Shell-less eggs are seldom found, especially when they are not laid in the nest. They are eaten by the birds or fell through the slats, so this signal is one you must watch for carefully. 6. O n se t o f l a y ( u p t o 5 % pro du cti o n )

In houses where automatic egg collection is used, it is important to switch on the egg conveyors several times a day, even before the first egg has been laid in a new, young flock. This allows the birds to become accustomed to the noise and vibrations that come with it.

At the beginning of the laying period you will see small eggs (45-50 grams), double yolks or deformed eggs. Although they have been fertilised, they are not suitable as hatching eggs. Small eggs always produce small chicks. These are also often floor eggs, which are often contaminated with bacteria. Embryos do not develop or die during the hatching process. 95


LOOK-THINK-ACT

Egg shells under slats! Most of the eggs that fall on the slats, break and are often not found. If you clearly see fresh eggshells under the slatted floor it is only the tip of the iceberg and you lose much more than you actually see: easily 1-3% eggs per day of floor eggs can be found on (or often under) the slats. Rule of thumb: 5% total floor eggs is at least 2.5% losses.

Tip If you find too many floor eggs, you could remove all of the litter (and put it temporarily under the slats) to make the floor less interesting to lay eggs. This is applicable in a young flock up to 28 weeks of age.

A floor egg on litter invites hens to lay their next eggs beside it. Remove floor eggs several times a day so that the females do not feel tempted to lay floor eggs. Just pick them up during your walkthrough rounds: never go into the house without a basket for floor eggs.

96

Floor eggs Floor eggs cause production losses and are a hygiene risk for the hatchery. Make sure you sufficiently train the females to lay the eggs in the nests. Attention to detail prevents floor eggs! Floor eggs give lower hatching results and you see more early-chick mortality. Indirectly you see a higher use of antibiotics required in the offspring: the broilers. Make sure all birds roost on the slats a week after the transfer. If they don’t do this on their own, do this manually or chase them onto the slats with a flashlight. After a few days, they’ll all sleep on the slats. Make sure that they do not sleep against the outside wall (= furthest from the laying nests). This reduces the risk of too many floor eggs. Normally you see more floor eggs in the beginning than later in production. This is due to the inexperience of the birds, as a result of which the first eggs often fall on the ground or on the slats. The hen must first learn where to lay her egg. And while some hens lay their eggs in the litter, other hens tend to lay theirs close to these floor eggs, increasing the problem. Quite often at the end of the production cycle you can see the number of floor eggs increase again. Floor eggs are laid in the litter as well as on the slats. However, you often don’t find them on the slats because they are broken there by the chickens. So pay attention to shells and yolks under the slats on the manure.

Chickens learn how to eat floor eggs. Prevent this by removing the floor eggs as often as possible.

B re e d e r S i gnal s


Dark, secluded corners are the preferred places for floor eggs. Increase the light intensity between 30 and 60 lux to prevent floor eggs. Make sure that the last light source in the house is located close to the wall. At construction, the first and last light source are often two metres from the front and rear wall, thus preventing a good light distribution in the corners of the house!

Floor eggs on the slats just in front of the laying nests. This was caused by an electrified wire above the drinking lines in order to keep birds off. Chickens are very sensitive to electromagnetic fields and prefer not to pass underneath the drinkers to the nests. Never use electrified wires in a poultry house!

The lighting in this house is not good, creating a shady area next to the slatted floor. You will probably find floor eggs here.

By hanging a light source a little bit differently you can prevent shady places.

You sometimes find eggs under the feeding pans. Chickens like to sit under something when they lay eggs, which is probably an instinct to protect wild birds from predation (birds of prey).

Eggs under the feed chain. This sometimes happens when birds are fed at a time when they should be laying eggs. The desire to eat overrules the need to find a laying nest.

6. O n se t o f l a y ( u p t o 5 % pro du cti o n )

97


Train the females to use the laying nests.

Preventing floor eggs The first two weeks in the production house determine the result. You can’t unlearn bad habits. Prevention is the best solution!

Avoid alternative laying spots.

Make sure there’s peace and quiet around the laying nests.

Prevention of floor eggs

98

Phase

Action

During rearing

• • • • • •

Teach the chicks to jump in order to learn how to use the laying nests. Use the same feeding and drinking systems in rearing and laying. Place platforms/perches from 4-6 weeks. Place drinkers above the platforms/perches. Ensure a light intensity of at least 10-20 lux (stimulates activity and use of the platforms). Do not use electric wires above the feed and water, this will prevent birds from learning to use their environment.

During the production period

• • • • • • • • • •

Place the birds directly on the slats after they have been moved. Keep the nests, slats and perches clean. Open the nest at least one hour before lights on. Close the nest an hour before the lights switch off. Make sure the opening is large enough. Provide a slat height of up to 25-30 cm and less than 5% slope. Keep a maximum of 45 females per linear metre of nest. At the start of the laying period, collect floor eggs at least five times a day to keep new eggs from being laid next to the already present floor eggs. Take the light programme from the rearing house as a starting point for the layer house. Open the nests at the first signs of crouching. Females are curious and will explore the nests.

Feed and water management

• • •

Avoid feeding at the time of oviposition. Do not place an electric wire above feed and water. Lift up empty feed lines.

Housing

• • • • • •

Distribute the light evenly throughout the house. Avoid moderately lit areas or shadows. Avoid draughts in the nest boxes. Distribute ventilation evenly through the house. Avoid high bird density. Make sure the laying nests are dark with a light opening.

Male behaviour

• • •

Synchronise the maturity stage of males and females. Avoid over-mating (too many males). Place the male feeding systems far away from the nests.

B re e d e r S i gnal s


Night-layers

Influence of male feeding systems’ location on % floor eggs 8 7 6 Floor eggs (%)

The moment of lights off is the signal when a hen starts making an egg. So if you turn off the lights for too long, the hen will lay the egg while the nests are still closed. Keeping the light on for an extra hour also solves the problem: the egg is therefore laid later. Or switch the lights on an hour earlier in the morning. In other words: shorten the night. You’ll wake these females up sooner so they can go to the nests.

5 male feeders against slats 4 3 2 male feeders against outer wall

1 0 30

35

40

45 Age (weeks)

50

55

60

If the male feeding systems are placed far away from the laying nests, the percentage of floor eggs decreases. The males in front of the nests are an obstacle for the laying hens.

L LOOK-THINK-ACT How did this happen? You turn on the light and find a lot of eggs on the slats, especially just in front of the laying nests. These floor eggs were laid by night-layers, when the nests were still closed. Immediately extend the length of the day. You can also apply twilight lighting (2 hours before the main lighting is switched on), so that the hens that want to lay an early egg are able to find the nest.

After closing the nests, make sure that no birds got stuck in the nest and that there are no dead hens in the nest! If you find dead birds on the nest, take them away and disinfect the nest.

6. O n se t o f l a y ( u p t o 5 % pro du cti o n )

99


Male feed during production period

Example of feed intake targets

Feed intake (g/bird/day)

180

160

female

140

male

120

100

20

25

30

35

40

45

50

55

60

Age (weeks) Whereas the feed supply for males is gradually increasing, for the females it has to decrease after the laying peak in order to prevent females getting too fat.

From the start of the production period, weigh 10% of the males weekly or a minimum of 30 males per side of the house or compartment. Aim for the males to reach the recommended weight at 30 weeks. Don’t let them get too heavy. The males must increase their weight sufficiently in the period up to 30 weeks. From this period onwards, the increase in weight should be limited, but the males should not lose weight at any time, as this has a negative impact on the production of sperm. After 35 weeks, the feed supply for the males should always be increased, this can even exceed the feed supply (especially with low energy feed for the males) of the females. If the feeding system of the males works optimally, the feed per male can be as much as 200 grams per bird per day. In the beginning of the laying period, increase the amount of feed for the females every day in small steps from 2 to 3 grams per week. Large changes can lead to intestinal problems or fattening. Males usually eat their daily feed within 20-40 minutes and then have time left to steal from the females.

Use a catching frame in order to get a good sample of at least 30 males to weigh. Weigh all birds in the frame, otherwise you might miss the small birds that always tend to hide and then you don’t have a representative picture of development.

ᅚ

a

Use a wing clamp for weighing. That is much more bird friendly than hanging them from the legs. And never hang them from one leg!

100

B re e d e r S i gnal s


Feeding time

Egg production pattern

Production (%)

During rearing, in most cases the birds are used to being fed immediately after the light has been switched on. Keep doing this at the beginning of the laying period! This prevents stress, because chickens are birds of habit. Make sure you are present during feeding time for observation. During the laying period there are roughly two options for feeding time: 1. Feed immediately after switching on the light. Provide drinking water at the same time as the light. In this way, the feed lines are empty before the majority of the eggs are laid. A big advantage of feeding in the morning is that on hot days you have no problems with feed intake. The feed intake during warm periods of the day will be lower. The disadvantage is that more birds tend to defaecate in the nest. 2. Feed 6 to 7 hours after lights on and about half an hour after water is provided. This way you feed after most of the eggs have been laid. Make sure you have sufficient water supply capacity (especially in summer). The birds only have about 6-7 hours to drink, check the crop before the lights are switched off! This system is more vulnerable if feed or water systems do not work properly (increased mortality).

100 90 80 70 60 50 40 30 20 10 0

peak daily production 4-5 hours after lights on feeding 0-1 hours after lights on

feeding 6-7 hours after lights on lightss on

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Time (hours) Adapt your management to the moment of egg-laying. Provide rest around the time of egg-laying and do not feed. Otherwise you pull the birds away from the nest and eggs will be laid on the slats around the feeding systems. So you start feeding either 0-1 hours after lights on, or 6-7 hours after lights on.

Chickens are conditioned and will know when to expect the feed, after some time. Make sure the feed is distributed over the entire feeding system within three minutes. This will reduce stress and improve uniformity.

Make sure the sensor on the hopper is working properly so the system does not run empty. Otherwise it will take too much time to fill up again.

6. O n se t o f l a y ( u p t o 5 % pro du cti o n )

If the houses are longer than 50 metres, it is best to fill the feeding system from the centre of the house in both directions. You can also fill from several places in the house, by placing extra hoppers. In any case, make sure that the distance between the beginning of the feed line and the end is as short as possible.

101


Water consumption

Water consumption pattern at different flock ages

Capacity of the feed/water system With controlled feeding, the pressure on your feeding and drinking system is high. During this period, make sure there is plenty of space for eating and drinking. This stops after about 25/26 weeks with a feed ration of about 150 grams. At a younger age, you see a lot of activity just after feeding has started. But as soon as the feed intake is at satiation level, the urge to eat quickly decreases. They then eat a little slower and more spread out over time, which makes it less crowded at the feeders.

25 weeks 30 weeks

07:00 07:30 08:00 08:30 09:00 09:30 10:00 10:30 11:00 11:30 12:00 Time With young birds (25 weeks), there is a peak in water intake after feeding because they are still under strict feed control, so all eat at the same time and subsequently all drink at the same time. The system must have the capacity to provide for the top demand, not the average. Drinking behaviour changes as the birds move towards satiated feeding; there is more time for feeding and drinking. At 30 weeks the water intake per hour is more constant.

Make sure that you have enough feeding space so that all birds can access the feed properly and that they do not experience any stress or get pushed out of the way. This creates more peace and better feathering. If you see hens pacing up and down the line, it might be too crowded.

102

Especially at the beginning of the laying period, the birds experience a lot of stress during feeding because they were used to eating the feed quickly during rearing as a result of controlled feeding. Therefore, feed in the dark. The birds are calmer and you can distribute the feed more easily. There are fewer accidents and fewer problems with feathering.

B re e d e r S i gnal s


Growth and condition In addition to the daily check-up rounds, walk through the flock at least once a week purely to check the physical condition. Do this with more than 25 females, feeling the breast meat and looking at the foot pads. Also pick up more than 10 males to assess the breast meat and general condition. The most important period to do this for females is between 20 and 30 weeks of age. Males must be properly monitored throughout the production period.

Monitoring growth is very important. If the males grow too fast now, they will become much too have later. Males with too much breast meat have difficulties keeping their balance while mating. This results in less successful matings.

Breast meat and lysine Lysine stimulates the development of breast meat. With a surplus of breast meat, males can become much less stable (heavy front). For good mating behaviour, it is desirable to provide less lysine for males. In addition, breast meat consists of muscle tissue. Muscle tissue needs a lot of energy for maintenance. This costs extra feed.

Review the development of the breast on a weekly basis.

The rapid increase in feed intake (and switch to proteinrich feed) at the beginning of the laying period often results in wetter droppings. In addition to the switch itself, this is because the surplus protein that must be excreted (in the form of uric acid) for which water is required.

6. O n se t o f l a y ( u p t o 5 % pro du cti o n )

This feeder is empty. Controlled feeding is applied until peak production to avoid rapid growth. After the peak the amount of feed is closer to the satiety level of the females, so there is less stress around feeding. If the birds don’t grow enough, you give them a gram extra. If the birds grow too fast, you give one gram less.

103


CHAPTER 7:

Production towards peak

From 5% daily production to peak production, it is essential to promote and support reproduction during the laying cycle. In addition, it is also the period to make sure hens lay in the nests and not on the floor. Monitor the development of the birds as much as possible. Do not just monitor weight gain of males and females, but also their nesting and mating behaviour. Also watch the distribution of the males and females.

In practice, it is very critical to provide energy and protein according to the birds’ needs. In this initial period it is quite a challenge to feed every bird according to its requirements, because production increases very rapidly from 5% to over 80% within a few weeks. On top of that, this increase is not uniform for all birds. When the average production is 50%, the production of many females is already 80%, while others are just starting. If you increase the amount of feed exactly in accordance with the average laying percentage, the highly-productive birds are being fed below their requirements. This makes it very clear how important it is to have a uniform flock in all aspects.

104

Birds that receive more feed than necessary for egg production and growth will increase their weight considerably. They are just not sexually mature enough at that moment (overstimulation). The eggs of these females will be of poor quality (many double yolks), with a poor hatchability and an increased risk of peritonitis and prolapsed cloaca. In practice, you feed a bit more than production would justify (anticipate expected production). To prevent the birds from gaining weight too quickly, you need to increase the daily feed allocation by small amounts, but every day, starting from 5% daily production.

B re e d e r S i gnal s


Eating behaviour

Example: pattern of feed adjustments in relation to egg production daily adjustments

weekly adjustments

steady state (feather loss = more energy requirement) egg production

feed ration Egg production

Make sure that all birds have access to the feed simultaneously. If birds do run from one place to the other it is a signal that everything is not OK. The more dominant birds will have access to the feed first and then the less dominant ones. Also the speed of the feeding system can scare off birds, but some of them are not afraid and will eat. This also creates stress, so let the system run in the dark, especially with speeds over 20 meters/ minute. These differences in eating behaviour are causes for developing an uneven flock, especially an uneven development of the lower-class birds. These birds, often already with a lower body weight, will then lag behind in further growth. At about 60% daily production (around 25-26 weeks) you reach the maximum feed intake which is close to the satiation level of the bird. The birds will be a lot calmer by then. During peak production, they are at about 90% of their maximum feed intake capacity. If (peak) production does not increase for one or two weeks, reduce the feed by 1 gram per female per week to prevent fattening. Monitor growth using the management guidelines of the breeding company. If the birds grow: reduce the feed by 1 gram!

Age (weeks) Until onset of lay, you adjust the feed level weekly. Between onset and peak daily and after the peak you can go back to weekly adjustments. This allows you to make the most accurate adjustments during the critical period.

Laying is leading (example) Creatures of habit Chickens are creatures of habit. Make sure that you keep your choice of raw materials the same as much as possible when changing feed between phases. This keeps the taste recognisable and familiar and makes it easier for the chickens to continue eating. This also prevents digestive problems. Protein can be obtained from, for example, soy or rapeseed meal, but the taste is completely different, as you’ll find out as soon as you switch from one to the other.

Flock weight is decreasing. What should you do? When the weight of the flock and/or the 10% lightest females decreases, you increase the feed ration once by 3-5 grams per female per day.

7. P ro d u c t i o n t o w a rd s peak

Laying rate

Feed ration

5%

130 g

15%

137 g

25%

144 g

35%

151 g

45%

158 g

55%

164 g

65%

170 g

75%

170 g

85%

170 g

During rearing you adjust the feed according to body weight, during laying the laying percentage is the guideline until at 60-65% the maximum feed level is reached. For example: on 5% production you provide 130 grams, the peak being 170 grams. You divide this 40-gram increase over the projected 60% rise in egg production, so an increase of approximately 0.6-0.7 grams of feed increase per % production. In fact, this is based on the energy requirements of the bird, so it is better to use joules/calories as a measure.

105


Feeding management

Feeding early lay

There is much more to determining the daily amount of feed than the bird’s age. You must consider the needs of the birds, their level of production and the egg weights, as well as the weight of the birds themselves. Watching behaviour at feeding time provides a lot of information and therefore it can help a lot in adjusting the management accordingly. This information is usually one step ahead of production perfomance. The combination of production, bird weight, and egg weight are always leading indicators for the actual daily amount of feed. In very productive flocks, it is important to give enough feed to maintain that production, but also when egg weight and/or weight gains are below target levels. Prevent the development of too much breast meat, because the maintenance of breast meat is relatively ‘expensive’. For maintenance of 100 grams of body weight, 9 kcal is needed, for 100 grams of breast meat it is twice as much. Be aware that a lot of body weight is determined by the abdominal cavity. This develops between 23-30 weeks of age.

It can be difficult to control the body weight of the males properly, because during this period the males are increasingly excluded from the females feeding systems. Therefore, determine the average body weight and the weight gain of the males at least once a week. Also check their condition as you walk through the poultry house. Females at this time are eating for longer and longer periods as the feeding rate approaches their satiety. This gives males more opportunities to steal feed. This is a crucial time to control the males’ weight; they should not become too heavy, but certainly not lose weight. Males hardly have any fat reserves. If they do not get enough feed, the weight of the testicles will decrease because the fat reserves will be used there as well, which will result in a poorer sperm quality. Comb colour (blue) and activity are signals of (too much) feed control. Before the laying peak 45-80% of the maximum feed intake capacity is provided, after the laying peak this remains at a level of 80% of the unlimited feed intake capacity.

Calcium Provide calcium, added to the feed, as soon as the hens start laying eggs (from 22-24 weeks). In order to make eggs with a strong shell, a considerable amount of calcium is required. The hen gets calcium from her bones (30%) and from the feed. Linoleic acid There’s more linoleic acid in the first laying feed. This gives heavier eggs due to a higher yolk weight (more nutrients for the chick). Especially in combination with more TSAA (methionine and cystine).

Leaning feed pans. Females can only eat on one side, so poor feed distribution and insufficient feeding space. You can see the same with round drinkers, especially with a steep slatted floor.

Example of key feed characteristics in various phases Pre-lay

5%-35 weeks

35-50 weeks

50-60 weeks

Energy (kcal)

2,750

2,850

2,850

2,850

Lysine

0.49

0.57

0.53

0.49

Methionine + Cystine

0.48

0.56

0.54

0.51

Crude protein

14

15

14

13

Crude fat

3.5-4.5

4-5

4-5

4-5

Calcium

1.2

3

3.2

3.4

Linoleic acid

1.00

1.50

1.25

1.25

At the beginning of the laying period there is a need for more energy, amino acids, protein, crude fat and, of course, calcium. While the next feed phase is mainly lower in protein and amino acids (keep egg weight low and don’t let birds produce too much breast meat) but equal energy (high BW) and a little more calcium (for stronger shells). 106

The hens must be able to select the limestone particles so that they can absorb calcium as required. The particle size must be at least 2 mm for optimal absorbability. Good sources of calcium are chalk and limestone.


Monitoring behaviour The most underestimated monitoring tool is the behaviour of the chickens. Especially during feeding, it is important to be present to observe the flock. That way the chickens give signals about: • Whether there is enough feeder space • Whether the feed is distributed equally over the house • Whether the females are afraid of the males • Whether the males are looking more at each other rather than at the females • Whether the nests are used equally Keep in mind that it is hard to change behaviour. It is preferable to deal with it and to adapt the housing and management. Combined signals when feeding the females: • Development of daily production - daily • Feed intake speed of the females (clean up-time) - daily • Body weight increase - weekly for manual weighing, daily for automatic weighing • Quality of the feathering of the females - weekly • Weight development of the lightest females in the flock (uniformity). • Condition/confirmation - weekly • Egg weight - daily

Automatic weighing works well for females, but not for males. They walk around all the time and it is not in their behaviour to stand still on a weighing platform. So males always have to be weighed manually.

A height indicator in practice, so the feeding line hangs on the same height from the litter layer. Especially when you lift them up after each feeding and have to let them down at the next feeding. When birds grow, of course you have to change the length of the chain accordingly.

Feed systems are often lifted during daytime. To put it back at the correct height, connecting a chain on the feeder is a helpful tool. Also since the thickness of the litter increases over time (because of the droppings), a chain is a good measure to check the height.

7. P ro d u c t i o n t o w a rd s peak

107


Make sure you weigh all animals in your catching frame. Since especially the smaller animals tend to hide and that would give you a false average weight.

With automatic weighing you have to take into account when the weighing takes place: before or after feeding. You can choose to only include the weighings prior to feeding to get a reliable average.

108

Manual weighing system A catching frame allows you to catch a lot of birds at once for individual weighing. This gives you a good idea of the average weight in the flock. Try to do this each time exactly the same way: at the same two or three places in the house and at a fixed time of day to get more reliable results (about same group, same crop fill). In addition, a catching frame helps you to remain objective. If you caught individual birds, there is a chance that you would miss the fast (and possibly lighter) females. Slow and less vital birds are easier to catch. Or unconsciously you always catch the largest bird within reach. In this way, you might make a selection that is not representative of the flock as a whole. Unfed weighing is preferable, but in the morning the hen has to lay an egg and is usually fed immediately when the light goes on. So do this 6-8 hours after feeding. Automatic weighing system By weighing the birds automatically, you get a good picture of the growth pattern. This is now more important than absolute weight. Keep in mind that the average weight measured is higher because the birds are weighed automatically throughout the day, and therefore also just after eating and drinking with a full gastrointestinal tract. On average, from the moment of complete feed control, the weight is 106-107% of the ‘empty’ weight. You could also programme the automatic weighing system in such a way that it only records weights during certain times of the day (prior to feeding). With automatic weighing you can’t always be sure whether you are weighing a female or a male. Their weights must be different enough for this, but in fact, the growth curves overlap. So, heavy females are assumed to be males and males that are too light will be seen as females. Manually weighing males remains a necessity.

B re e d e r S i gnal s


Signals of feed intake time

Malnutrition signal If the birds do not get enough nutrients, the first thing you will notice is that the egg weights do not increase for 3-4 days and the egg weights start to deviate from the target weights. If the peak feed rate has not yet been reached, move the next increase forward to correct this. If the peak feed amount has already been reached, increase by an additional 3 to 5 grams per female for three days and see what happens. Monitoring egg weight Weigh a representative number of eggs, 120 (4 trays) – 150 (hatchery tray), at once. Use the eggs that you collect directly from the nest in the second round of collecting to prevent you from weighing eggs that were laid the day before. Remove the double yolks, small eggs and abnormal eggs (e.g. soft-shelled eggs, cracked eggs) before weighing. It is important to weigh eggs from about the same place in the house. The time of day is also important. Morning eggs are a little heavier than lunch eggs. Watch out! Don’t forget to subtract the weight of the tray(s) or setter tray from the total weight.

7. P ro d u c t i o n t o w a rd s peak

Development of egg weight

actual daily egg weight Egg weight

The time it takes every day to finish the feed, from distribution to empty feeding system, is a signal of whether the flock is getting enough energy. The feed intake time depends on age, temperature, feed quantity, physical characteristics of the feed, density of the feed components and composition, and the quality of the raw materials. Normally, the feed intake time around peak production is between 2 and 4 hours, at a room temperature of 20-22°C. If there is a sudden deviation in feed intake time, this may be due to reduced feed quality, incorrect feed quantities, health problems or water supply problems. A fast-running system prevents birds from walking around while the system is running. Some of the birds do eat out of a fast running system, others do not dare to do so. In a slow-moving system, filling up in the dark helps to completely fill up the feed system without competition for feed and feed selection: birds eat less quickly in the dark.

egg weight target

180

185

190

195

200

205

210

Age (days) The fluctuations in the daily egg weights are a signal of whether the nutrients are being absorbed properly. In case of insufficient absorption, you will see a decrease in egg weight, an excess will be reflected in an increase in egg weight. It is normal for the curve to show small fluctuations, due to variation in eggs and environmental influences. Collect this data from the moment the hens reach 10% production. Use an average of a few days or a week in order to get an accurate understanding of the situation.

LOOK-THINK-ACT

What do oversized eggs tell you? This flock lays a lot of big eggs. Oversized eggs, especially in the second part of the production period are a signal of overfeeding. Check the feeding schedule.

109


Signals of feeding errors

If there is not enough feed during the laying period or just after the peak, the females may become broody. Characteristics of broodiness: hens refuse to leave the laying nest, are aggressive towards humans and birds. Set up wings and feathers, sitting on one or more eggs, making a typical sound to indicate that they are under attack.

This male looks OK at first sight, but if you look more closely you see it looks a bit blueish around the eye, which is a signal for malnutrition. If you have a separate male pen, you can exchange males and put this one in a recovery pen.

To know if you are feeding well, the numbers can help but you must first observe the birds. Males that are slow and listless, with reduced activity and which crow less are underfed. This is where you need to intervene immediately. Check the feed intake time, feed space per bird, and the separate feeding systems. To be on the safe side, weigh the birds again, even if no alarming values have been obtained before. Then provide 3 to 5 grams of extra feed per male per day. The next stage is that the comb and the wattles become limp. The males that lose weight and condition, lose colour in their face, ornamentation and cloaca, and they can start moulting. No recovery is possible at this stage. If you observe broodiness in females, increase the feed before it is too late. And look for the cause. Is it in one part of the house? Check the feed supply and composition!

An all-blue comb can be a signal of too much feed restriction. Check this in combination with condition/ conformation.

Signals of feeding errors in the females during laying

110

Too little

Too much

Crude protein

Decreased egg size and number. Poor chick quality from young flocks

Increased egg size and lower hatchability. Increased metabolic stress during hot weather conditions

Energy

Body weight, egg size and egg number will decrease unless feed quantity is adjusted

Increased double yolks, increased egg size. Late fertility/hatchability decreased too fast

Lysine, methionine and cystine

Decreased egg size and number

Increased egg size and increased breast meat

Linoleic acid

Decreased egg size

Increased egg size

Calcium

Poor shell quality

Reduced availability of nutrients

Available phosphorous

Reduced egg production and hatchability. Reduced bone ash in chicks

Poor shell quality

B re e d e r S i gnal s


Monitoring the flock When the daily egg weight lags behind the optimal curve, males might be eating with the females, especially when the females are between 50% egg production per day and the laying peak. In that case the males become too heavy and the females too light. That is why it is important to monitor both the egg weights and the weights of the females on a daily basis. The signals of this in terms of body development normally occurs earlier but requires more expertise to assess. Weigh males manually every week, all through the cycle. Males must not lose weight! Losing weight indicates insufficient feed quantity or health problems. Weighing gives you the first signal but, in the end, you mainly look at weight in combination with condition and conformation.

A signal that a male is eating from the Bridomat-hen feeding system is the grey discolouration of the back of the male’s head, comb and wattles. They force their way in and sometimes the wattles get stuck in the spiral.

LOOK-THINK-ACT L

What do I see here? The male on the left has shrunken testicles. Shrunken testicles indicate decreased fertility. That is why a male should never lose weight, because the testicles shrink rapidly and the male is less fertile. Males that lose weight and start moulting rarely become good males. This is certainly true for overweight males that lose weight. The testicles should be well filled and well developed. In order to achieve this, the entire flock of males is kept in a condition of slight but continuous growth.

This is an example of bad feed distribution. It is overcrowded at the beginning of the feed chain and at the end there are no chickens (left on photo). By this time the chain is either empty or there is only bad quality feed left.

Slow growing breeds and feeding Dwarf females for slow(er) growing broilers consume less feed during the production period, due to a lower need for maintenance. This means that the concentration of nutrients - especially amino acids - in the feed should be a bit higher than for conventional breeders.

Males must always be taller than the females in the house. If they don’t stand out, something is wrong. 7. P ro d u c t i o n t o w a rd s peak

111


Drinking water

Test the water regularly and also remember to swab the inside of the pipe. Provide a good cleaning protocol during the production period and during the period the house is empty. Bell drinkers require different maintenance than nipples. Think of cleaning with peroxide, compressed air in combination with water, etc.

An automatic nipple rinsing system contributes to good water quality. The pipe never empties completely, the nipples are screwed in the pipe and there is always a small layer of water. You can keep this clean by flushing it.

Check the water intake daily! Always provide water at the same time as feeding. This water must remain available for at least two hours after the feed is finished. A good habit is to provide an extra hour of water at the end of the day before the light goes out as a lure to make them sleep on the slats. Birds who want to, can go up for a drink. Keep the waterline clean by flushing and cleaning it regularly. Because consumption is not the same all the time, there is a greater risk of contamination (biofilm, for example). Biofilms are mainly caused by supplements (medicines, electrolytes, vitamins etc.) added to the drinking water.

In order to get a good picture of the water quality, it is important that you take samples as close as possible to the point where the birds are drinking. This way, not only do you know what the quality of the source is, but you also have an idea about the quality of the pipes.

Biofilm, a thin conglomeration of pathogens in the water pipe

1. Pathogens attach themselves to a surface.

112

2. Pathogens stick to each other by forming glue-like compounds.

3. The biofilm grows.

4. Particles of biofilm break off and the pathogens spread through the water pipe.

B re e d e r S i gnal s


If you wouldn’t dare to drink the water from the nipples yourself or give it to your own children, why would you give it to your birds?

Check at least 20 birds in the house every day for water intake. You can feel the crop to see if the content feels mushy. Check this throughout the house (front, middle and back) and at the same time of the day. Preferably in the afternoon, 2-3 hours before the light goes out, while there is still time to provide extra water before the light goes out. Each bird should drink sufficient water to digest the feed properly.

A good measure of the amount of water in the bell drinkers is half a thumbnail depth (approx. 1 cm). This guarantees a sufficient water level but prevents waste.

7. P ro d u c t i o n t o w a rd s peak

A single wire stretched over a drinking line often does not prevent birds from sitting on it. A double wire will... Don’t forget to tighten the wire frequently.

113


Heat stress

Feeding time and heat stress

Core body temperature (°C)

44

peak of temps 30 minutes after feeding

43 42 41 39 38

lowest temps midnight and 3:00 am

temps began to rise 2 hours before lights on

0

0

1

2

3

4

5

6

Time (days) In case of heat stress, do not feed during the day but very early in the morning or feed less (temporarily), since digestion releases energy, heating up the birds even more. The coolest moment of the day is often two hours before sunrise. The hottest moment is 3-4 hours after solar noon (highest position of the sun), so at noon the feeding system – and preferably also the crop – must be empty.

Drinking in hot climates It’s hot in the poultry house, yet the birds do not want to drink. This happens when the water temperature is higher than 40°C (105°F). Check the temperature of the drinking water. Or there may be an unpleasant taste to the water (incorrect dosage of acid/medication or other additives). Rinse the pipes with fresh water and keep the water temperature between 18 and 21°C. For fewer problems during hot days, it is advisable to provide the feed and water immediately after the light is turned on.

The temperature in the house should preferably be around 20°C, with little fluctuations in the minimum and maximum temperature (max. 6-8°C per 24 hours). Chickens have a so-called thermo neutral zone, or comfort zone. This is the ambient temperature at which the chicken can easily maintain its body at the right temperature. This thermo neutral zone is between 18 and 27°C. When it is warmer than the upper critical temperature (27°C), the chicken must work to lose more heat to keep the body temperature constant. The moment the chicken doesn’t manage to do this, her body temperature will rise. With heat stress, you immediately see a lower egg production and sometimes increased mortality. There will also be poorer fertility, but you will see that later in the cycle. Heat loss The capacity of the chicken to release its heat depends on both environmental and bird factors. • Environmental factors: A high wind speed, low relative air humidity and a large difference in temperature between the bird and the environment ensure that the bird can easily lose heat. Conversely, the effect of a high ambient temperature on the body temperature of chickens can be enhanced by a high level of humidity (> 60%). • Bird factors: age, volume/surface ratio, body weight, growth rate, possible egg production, condition of the plumage (insulation) and behaviour.

A chicken that is warm will try to lose heat by panting, dustbathing (looking for a cooler layer in the litter) and by keeping her wings away from her body.

114

B re e d e r S i gnal s


Effect of heat stress on egg production and fertility

High temperature + high humidity = HEAT STRESS The result of the sum of temperature and humidity gives an indication of the amount of heat stress a bird is suffering. A comfortable value is 90. Rule of thumb: Above 100 = heat stress. Above 115 points for a longer period, the birds die.

Production/fertility

fertility

egg production heat stress moment

Age (weeks) When the temperature suddenly rises, you first see a dip in the production rate, followed by a dip in fertility.

You’ll see more dead birds when it is hot. But in addition, a large number of the birds suffer from heat stress, which also costs reproduction in the long run (fewer eggs and lower fertility). Rule of thumb: 1 chicken dead = 10 chickens almost dead.

Comfort zone

Temperature 18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

The ideal relative humidity is 50-70%. Heat stress is caused by a combination of high humidity and temperature, where the chicks can no longer lose their heat by panting, because the air around them is already saturated. Try to keep the birds in their comfort zone: the green belt. If you reach the red area, birds will die. In the blue area the bird suffers from cold stress, especially if poorly feathered. So, if the room temperature is below 18°C, increase feed intake.

100

Danger

95 90

Humidity

85 80 75 70

95

Muggy

60 55 50 45

7. P ro d u c t i o n t o w a rd s peak

85

Comfortable Too low

H. Rodenboog

65

115


Cooling in the house In order to prevent heat stress when outside temperatures are high, a cooling system must be in place to ensure that the house temperature never exceeds the upper limit of the thermo neutral zone. Examples of cooling systems are fogging/ misting or pad-cooling. The effective temperature can also be lowered by using tunnel ventilation (wind-chill). Options when using fogging/misting: • Inside or outside. Indoor cooling by mist is more effective than outdoor cooling. • Above the incoming air. • Low (10 bar, 30 microns)/medium (35 bar; 10015 microns)/high pressure (60 bar; 5 microns). Preferably high pressure because a fine mist evaporates quickly and the houses hardly get wetter. Effective temperature is a combination of temperature, humidity and wind movement. Up to 3 meters per second is used in hot climates. This has a strong cooling effect.

Example of atomisation cooling.

116

Additional measures Feed • Feed at the coolest time of the day (as early as possible). • Provide less feed (-10 to -15%). From 26-30°C 2 g per °C, from 30°C 3 g per °C. • Turn off the water every now and then in order to get cool water to the birds. Water • Make sure that the birds always have fresh and clean water at their disposal. • Add bicarbonate and vitamin C with electrolytes to the water. Start this one day before it gets warm. Ventilation • Ensure sufficient ventilation capacity (> 3.6 m³ per kg body weight). • Make sure that the negative pressure is maintained. • Make sure the air inlets and fans are clean. • Avoid blind spots. • Create air speed at bird level (stimulate evaporative cooling). Lighting • Leave the lights on somewhat longer at the end of the day, so that the birds remain scattered in the house and are still able to find water (temporarily extend the length of the day). Cooling • Start cooling well before the hottest moment of the day, at approx. 27°C room temperature.

Pad cooling is used in warm climates with dry air (RH < 80%). Air is drawn through a water-saturated filter and cools the air by evaporation. A point of attention is the retention of minerals (especially calcium) after evaporation. Rinse the pads frequently. At high humidity levels, you can get ‘wet’ wind with negative consequences for bird health.

B re e d e r S i gnal s


Signals from the laying curve

Relation egg production, hatchability and number of chicks 100

By nature, hens always lay their eggs in a series of consecutive eggs: a so-called clutch of eggs. Because the formation of egg takes a little more than 24 hours, the birds skip a day at a certain point. At the peak the egg production is between 85 and 90%. Compared to laying hens, breeders have a higher urge to lay eggs in the beginning of the laying period. More follicles are released. As a result, you often see a lot of double yolks: the signal for a high peak production. If you have more than 6% double yolks, it could be a signal of over-stimulation with feed or light. The peak of the egg production is around 85-90% between 28 and 32 weeks. At that moment the focus is on the viability of the chicks and the weight of the chicks. If the peak in feed is reached too late, this could have a negative effect on chick quality. The peak of hatchability is a bit later, at the age of 34-38 weeks.

6 5

hatchability

80 70

egg production

4

60 50

3 chicks/week

40

2

30 20

1

10 0

Chick production (chicks/hen/week)

Egg production / Hatchability (%)

90

0 22

26

30

34

38 42 46 Time (weeks)

50

54

58

The peak in hatchability and chick production is later than the peak in egg production. Therefore, feed intake after the laying peak should not drop too quickly to avoid a negative energy balance with adverse effects on egg production, fertility and chick quality. If a negative energy balance lasts longer, broodiness may also occur.

It is common that many hens sit together on a laying nest. This is not a signal of overcrowding but natural behaviour to sit together.

Relation production at 30 weeks and total production

Relation mortality at 30 weeks and total production 200 Number of eggs at 60 weeks

Number of eggs at 60 weeks

200 190 180 170 160 150 140 23

25

27 29 31 33 35 Number of eggs at 30 weeks

37

39

190 180 170 160 150 140 0

2

4 6 8 Mortality at 30 weeks (%)

10

12

Many poultry farmers use the number of eggs at the age of 30 weeks in order to predict total production. However, the number of eggs at 30-35 weeks is not a good predictor for the total number of eggs at 60 weeks of age. Mortality around 30-35 weeks is a better indicator because birds that die do not lay eggs and it is a signal of the overall quality of the flock! 117


Male grading

Posture

straight neck

upright tail

steep back

straight line from beak to toes

A good male has a dominant, upright posture. With an upright tail, straight back and straight line from the tip of the toe to the beak. A steep back indicates a physically better build to mate (balance), which attracts females.

Up to 30 weeks, you must selectively remove males that are inactive and have bad legs. Males that exhibit non-dominant behaviour should also be removed, for example, males that run away, are afraid, stay on the slats, or stay in front of or in the laying nests. These only cost feed and have no added value. After 30 weeks you should start to grade those males with incorrect posture, which are not actively mating, or that are very heavy. The males must have the following characteristics: • Uniformity in body weight • No physical abnormalities • Alert and active, upright position • Strong, straight legs and toes • Good muscle tone and condition • Beautiful red, firm comb and wattles and moist cloaca are signals of mating behaviour

ᅚ

118

Males should have a straight back and upright tail.

Remove males with an arched or bent back.

An arched back, caused by a deformation of the back (enterococcus infection, kinky back), making the chance of a successful mating very small.

The angle between neck and back is too small, which is not a good posture of the male. B re e d e r S i gnal s


Male hierarchy and competition The percentage of males at transfer is about 9-11% and this is reduced by grading and mortality of males. At the start of production around 23 weeks of age, approximately 8-9% of males are present in the flock. The reasons for grading males for removal are absence of mating behaviour or health problems such as leg problems. Approximately 15-30% of the males are selected during the production period. Often farmers increase the number of males in order to have sufficient males left at the end of production. However, this might become a vicious circle: too many males will cause more competition and fights (= less mating), increasing male mortality. So you will use even more males next time, causing...

Males and females choose each other by comb size and colour. These external features may be an indication of health and fertility. A female with a large, fleshy comb has more sex. She also receives 50% more sperm per ejaculation than a female with a small comb.

Dominance and mating results 3.5

mounts

Acts/male/hour

3.0 2.5 2.0

completed matings

1.5

interfering

1.0 interfered with

0.5 0 subordinate

intermediate Dominance category

dominant

The most dominant males mate more often and deliver more offspring than lower-ranking males.

Males that are at the bottom of the hierarchy or that are afraid sometimes will hide in the nests. That’s not desirable, they contaminate the nests and scare off the females. Remove these males from the flock.

A male that should be removed immediately. It is a victim of pecking and will not mate at all.

Damaged comb due to aggressive pecking by other males, probably aggravated by a staphylococcus infection.

7. P ro d u c t i o n t o w a rd s peak

119


Male legs The legs of especially the males are good indicators for the quality of the birds. They should be long, colourful and straight. The length is very functional, since most female excluding systems for feeding are based on bird height, and for proper mounting the male requires long, strong legs.

Males’ legs can be measured nicely with your fingers. But beware: this only applies if you always use the same finger (or, the same person).

If you hold a bird upside down, you can assess their leg position. Are they straight, like here? Or O-shaped (yellow line, varus) or X-shaped (red line, valgus)? Crooked legs will damage the backs of the females. Remove males that not have straight legs, like the X-legs on the right.

Short or long legs? The top male has short legs and will not be able to mate well: it can’t make contact with the female’s cloaca and it will keep its balance badly! This causes a lot of unrest during mating. The female experiences the attempt as a mating and thus she may not mate again. This underdevelopment often occurs in the first six weeks of rearing. Remove these males.

Red legs, a sign of high sexual activity.

Leg length and fertillity result 94 Fertile eggs (%)

92 90 88 86 84 82 80 Long

Medium

Short

Leg length Remove males with bent toes, as they can tear open the flanks of the females. In addition, there may be a genetic component involved that can cause problems for the broilers as well. 120

Heavier reared birds (light blue) have longer legs and on average higher fertility rates during the entire laying period. B re e d e r S i gnal s


Other criteria

A male that shows active mating behaviour will have broken feathers and partially lose feathers around his shoulders, thighs, chest and tail (left). On the right you see a male with a beautiful feather cover but that doesn’t mate much. Feathers around the cloaca and belly remain white. These are probably new feathers and you won’t see any broken feathers on the belly. Remove this male.

The comb is a sign of male quality: the differences between these four males are clearly visible. The front two males are well developed. The rear male has a poorly developed comb and the male in the middle has a pale comb. If the combs are pale, have an autopsy done on some of the males. It may indicate worms or liver degeneration (Fatty Liver Syndrome). A feed supplement to support liver function could provide relief.

Resistance of the wings gives you an indication of the strength of the bird.

Breast blisters are painful during mating and therefore males with breast blisters will avoid mating.

The males should be evenly distributed over the litter area during the light period. This is important throughout the day, but especially in the afternoon during the peak mating period of the day. Males must not group together on the litter or hide under the equipment. Remove males that are not alert and not active. Comb colour is an excellent indicator of overall health.

This male is too small. The height of the feed line is adjusted to the height of the average male. A well-adjusted male feed system therefore works automatically as natural selection: males that do not grow sufficiently are selected automatically. Males do not grow in height after 20 weeks. This male has probably been eating with the females for a long time and definitely had a problem to start with (bent back).

7. P ro d u c t i o n t o w a rd s peak

121


Sexual activity The main parts of the males to assess are comb (easiest to see), legs and cloaca. A male that is in good condition and mates well has an even, red colour all over the comb, its wattles and in the area around its eyes. The closer to the eye, the more intense the red colour. A male

that is not in a good condition and that does not mate well will lose its red colour from its eyes to the outside. Males that have little colour in their face probably don’t mate much and should be removed.

Active male at 30 weeks of age

Yellow legs, hocks turning red at the edges.

Moist cloaca.

Active male at 35 weeks of age

Clear red edge at the hocks.

Pink-red and moist cloaca.

Active male at 55 weeks of age

Warm and red belly. 122

Large, red comb and red around the eyes. B re e d e r S i gnal s


Grading is a continuous process to prevent the removal of too many males at once, as this may lead to unrest.

Inactive male at 30 weeks of age

Pale legs and no red edges at the hocks.

Dry cloaca.

Inactive male at 35 weeks of age

No red hocks.

Dry, pale cloaca.

Inactive male at 55 weeks of age

Well feathered, pale belly. 7. P ro d u c t i o n t o w a rd s peak

Pale comb and white around the eyes. 123


Male-female interaction Competition will make males perform better. Diversity is therefore good in a male population. If the males are too dominant or too many in number, they may encircle the females. This is undesirable. The males should mingle with the females. Look for the cause of this behaviour: • Males are ahead of the females in terms of development • Percentage of males is too high • Relatively small litter area • Stocking density too high

An obvious situation of a group of females, surrounded by dominant males.

Variation of individual male activity over time 40 35 Progeny per male

30 25 20 15 10 5 0 2

4

6

8

10

12

14

16

18

20

22

Weeks of production

ᅚ A uniform distribution of males and females increases the number of interactions leading to mating.

124

Every male is different. Some males are very fanatical in the beginning but can only maintain that spirit for a short time (live fast, die young!). Other males take it easy and become sexually active later in the production period. The combination of these types works very well; they complement each other. Don’t be too quick to remove males, they can improve later, as long as they remain in good condition!

X

Dominant minant males surround a group of females, this inhibits normal /f l interaction. i t ti male/female

B re e d e r S i gnal s


Influencing mating behaviour

You see that in a narrow poultry house it is rather crowded with equipment and birds. By hoisting one of the feeding lines, you create room for mating behaviour.

A typical image: males dominate the litter area and females the slats. But make sure they mingle sufficiently and that the hens do not flee to the slats out of fear for the males.

Males on the slatted floor in the afternoon is not a good signal. Males are supposed to walk in the litter area. Young males may be pecked at by females and older males. Or submissive males are taking cover. Remove these males. They are not functioning and just eat expensive feed.

A female with bad feathering will not be willing to mate and will avoid the males. Remember: it takes two for a successful mating. Injuries are caused by crooked toes and toenails of males, overactive males or high stocking density. Injuries can also result from too little feeding space for females at the beginning of the production period, before the satiation point (climbing on top of each other) or poor feathering to start with.

By lifting up the females feeding system, you can also influence behaviour. With many aggressive males, you keep the feeding system down. Males are then not only focused on the females and the females have more escape options. If the fertility rate remains low, you lift up the system, so that the males and females mix more and fertility results improve.

7. P ro d u c t i o n t o w a rd s peak

125


Sperm quality

Take a look behind you as you walk through the flock when you check or scatter grain. Not much happens in front of you. The birds move aside in front of you (if all goes well), but look back and you will see mating behaviour!

100

50

80

45 40

60

35 40

30

20

25

0

Complete matings (%)

Sexual activity (%)

Age and decreasing quality

Moment of mating

20 25

30

35

40 45 50 Age (weeks)

55

60

Around 30 weeks of age there is a turning point. The males then become less sexually active, and the sperm decreases in vitality and quantity. These males will complete fewer matings successfully.

Matings total (%)

Mating pattern 20

15

10

5

0 0 lights on

2

4

6 8 Time (hours)

10

12

The quality of the males and their sperm decreases while aging. The production of sperm will be less successful, resulting in more deformed sperm cells. These can reduce fertility results because they can fertilise an egg but this does not develop into an embryo. Adding males (spiking) that replace selected males from 40 weeks can prevent the downward trend. Females have the ability to retain sperm for about 10 days in order to fertilise all the eggs in the clutch of eggs. Therefore it is not necessary to mate for every egg she lays. When she mates several times a day it is usually the sperm of the last male that fertilises her egg. It is thought that this involves repelling sperm from less dominant males in favour of sperm from more dominant males.

14 lights off

The moment of mating is important for a good fertility result. The best time is in the afternoon for the following reasons: • Mating takes place after oviposition. There is no longer an obstacle in the reproductive tract, because the egg has already been laid. • Sperm concentration and quantity is highest at the end of the day. • Females can eject sperm from subdominant males in favour of dominant males. It is important that the females and males can come into contact with each other in the afternoon. The litter area is the ideal place for this. Roughly 90% of all matings take place on the litter area. In order to stimulate the contact between the females and the males you have to make sure that the birds are active at that moment. This can be done by scattering grain, performing walkthroughs, grading birds, providing water, etc. It’s your activity that gets the birds to mingle, which stimulates coincidental encounters between females and males. You could even say: every time you walk through the house after 15.00 hours you earn €100!

Mating activity is low for most of the day. The peak of the number of mating lies naturally in the afternoon. Therefore, contact between females and males in the afternoon is essential, especially during the last 3-4 hours before the lights go out. It is recommended to scatter grain to promote mixing. You get a similar effect by switching on the feed and/or water system for just 15 to 30 seconds.

126

B re e d e r S i gnal s


Deviating mating behaviour?

Failed / successful matings % failed % successful

100 Matings (%)

Around 25 weeks of age you often see the males mate ten times more often than biologically necessary. Because of this ‘over mating’, females can develop an aversion to the males. It also plays a role in the fact that the feather cover on the back of the females quickly becomes thinner making mating painful. In that case it is better to keep 20-50% of the males separate at the beginning of the laying period and gradually add more males over time. Broiler breeder males often show aggressive and rough mating behaviour. Courtship behaviour of broiler breeders is very different from the behaviour in a natural environment. Courtship behaviour is rare and the females hardly seem to notice the males. They hardly crouch either for the males. It seems that both males and females do not know the natural elements of mating behaviour or do not show it for reason of competition. The space for extensive courtship behaviour is also very limited at high stocking density. Too many males in the flock causes over-mating, interrupted mating and abnormal behaviours. If possible, you can move them to a male pen to be able to put them back in later.

80

% forced % non forced

60 40 20 0

20

22

24 26 Age (weeks)

28

28

Of the matings, 90% are forced by the male in week 28. 60% of these fail as a result. Females that avoid the males are responsible for a large part of the ‘infertility’.

This female crouched for the male, but this doesn’t happen voluntarily. She’s forced to squat.

Most mating takes place on the litter (about 90%). Due to a high stocking density, there is less room to exhibit courtship behaviour. This also reduces the chance of recognising signals that are specific to mating behaviour. If males do not have room for mating behaviour on the litter, they will look for other places in the house. Lowering the stocking density improves the quality of mating.

7. P ro d u c t i o n t o w a rd s peak

Under confined conditions, a male can’t really afford to exhibit courtship behaviour. Courtship behaviour means an extension of the duration of the sexual act, which increases the chance of interruption by competitors.

127


Male aggression If you see a lot of males fighting, and if that fighting ends in serious injuries and feather damage, then that is also a signal of too many males in the flock. Males who fight continuously, the so-called hooligans, fight but do not mount. Remove excessively aggressive males, they do nothing but disturb the peace.

This female is bald on her head. This is a signal that she has been mated many times. A slight loss of feathers is normal.

Harems? Under natural conditions, chickens live in groups of 5 to 30 individuals containing both males and females sharing a ‘sleeping tree’ with each other. Within such a flock, there is one dominant male, which generally fertilises most of the eggs. This dominant male plays the most important role in defending the territory. The dominant males generally tolerate lower-ranking males, but keep them at a distance. During the day, females and males within their territory gather their feed and, in the evening, they roost together (in the tree). The males seldom move more than 50 metres from their roosting location. The average territory is approx. 50-75 meters in diameter. The area of a population of feral chickens extends over a maximum of 0.5 hectares. However, this is not the case in a commercial house with more than 5,000 birds. 1. Chickens can only recognise a very small group of other chickens (maximum 50 to 150 chickens). In a flock of 5,000 birds, a male will no longer recognise its harem. 2. Most females use the entire surface of the house. Males stay in a more fixed area due to territorial behaviour. This is usually the litter. That’s where 90% of the mating takes place. The mating of males and females is mainly a matter of coincidental encounters.

Injuries on the back of the head due to persistent rough mating. This leads to reduced well-being, a decrease in condition and reduced egg production.

Promiscuity of females and production results 80 70 No of chicks

60 50 40 30 20 10 0 0 This male is coming right at you to fight you. Some males want to defend the females against humans. After 40 weeks of age the spurs are less sharp, but a collision is still undesirable. Aggressive males (towards other males or humans) are often the most virile ones.

128

1

2

3

4 5 6 7 No of males mated

8

9

10

Females in a breeder house mate with several different males. If females mate with more different males, they produce more offspring.

B re e d e r S i gnal s


Artificial insemination In many countries where labour is cheap, artificial insemination (AI) is still used to fertilise the females. With AI you inseminate each female once a week up to 40 weeks of age and from 40 weeks of age onwards twice a week (in the afternoon when there is no egg left in the oviduct). Semen is stored in the oviduct after insemination. The sperm remains good for 7-10 days after insemination. The female can therefore lay fertile eggs for more than a week.

Quality Time House An experimental system is the Quality Time House. In a Quality Time House the males and the females are separated five hours a day in a separate room with a separate feeding system, water system and a moving fence. Because the females get more rest and the males are more eager in the afternoon, more voluntary and successful mating is carried out. As the quality of sexual behaviour improves, the females also have an improved feather cover between 25 and 50 weeks of age. Fertility of hatching eggs after 40 weeks of age was 2% higher.

Pay close attention to hygiene when using AI, because in females this poses a great risk of infection with an E. coli infection (a bacterium that occurs naturally in manure). Rinse the manure from the cloaca beforehand.

Males are ‘milked’ by hand. The fresh sperm from the different males is then mixed and diluted and used directly for AI for the highest chance of fertility.

Quality time house. The males are placed in a separate area (middle or rear of the house around the male feeder) during feeding. If carried out correctly, the fertility results of AI are better than in houses with natural mating. 7. P ro d u c t i o n t o w a rd s peak

129


CHAPTER 8:

Peak production to end of lay

The period after the peak is all about maintaining production (persistency). Production should reduce by no more than 1% per week. The older the birds get the more alert you have to be. You will pay for any flaws in management.

Walk through the flock at least 5 times a day from 30 weeks onward: • It causes movement in the flock, resulting in more mating (better fertility percentage). • It is easier to find poor performers. • You discover malfunctions in the system at an early stage.

During collection of floor eggs, give sufficient attention to the birds.

130

Body weight (gain) During their lifetimes, the birds will probably start to deviate more and more from the target weights in the management guide of the breeder company. Therefore weight gain is a better measure then absolute bodyweight. This provides insight into the development of the flock compared to the targets and that is what you want to monitor.

B re e d e r S i gnal s


Attention points in the house

Laying curve peak production

100 90

loss of persistency

Egg production (%)

80 70 60 50 40 30 20 10 0 0

30

35

40

45

50

45

50

60

Age (weeks)

Attention curve full attention

100 90

loss of attention

80 70 Attention (%)

Stay alert to details in the flock, house and equipment, even in this phase of production. This can make the difference between good production, fertility and hatching egg quality and disappointing results. In order to be able to manage the flock properly during this period, you need the following information: • Daily egg production. • Daily (or weekly) body weight gain compared to the target weight gain. • Daily egg weights and changes in egg weight compared to the target weight. • Daily changes in the feed intake time. • Daily water intake and water/feed ratio. • House climate data. You have to keep in mind that an abnormal decrease in production or fertility is usually the result of ‘mistakes’ made long before. That is why you have to be very proactive. The later you notice that something is not going as expected, the less you can do to reduce the damage. In open houses and in less controlled housing systems you also have to deal with seasonal influences.

60 50 40 30 20 10 0 0

30

35

40

45

50

45

50

60

Age (weeks) After 40 weeks, the laying curve and the quality of the birds go down. But the attention span of the farm manager often decreases as well, while in this period it is important to maintain flock quality and this requires your full attention!

Observation frequency and hatch results often average few

Hatchability (%)

85 80 75 70

< 31 weeks

Monitor egg weight daily and compare it to the target weight. In this phase controlling egg weight is one of the main focus points.

8. P ea k p ro d u c t i o n t o en d o f l ay

31-40 weeks Age (weeks)

> 40 weeks

After 40 weeks the birds get lazy and may be more or less bored. Activate them by walking around in the afternoon. Advice: 2x in the morning, 1x around lunch and 2x in the afternoon, so a total of 5 times a day. Experiment for yourself to see if the birds respond differently to irregular walking times instead of doing it at the same time every day. 131


Clean laying nests

A dirty nest is the main cause of dirty eggs. The hygiene decreases towards the end of the production period.

You see stripes on this egg. These are dust stripes caused by the jute egg belt behind the nest. These are on the egg and are erasable. Clean the entire egg transport system regularly.

Birds don’t like dirty nests. In addition, hygienic nests are important in order to prevent E. coli etc. from contaminating the eggs. At oviposition the eggs are 40°C and without an air chamber. Due to cooling of the egg after oviposition, air is sucked into the egg, creating the air cell. But bacteria on the egg’s surface are also sucked into the egg. The older the breeder flock, the higher the porosity of the egg shell and the higher the risk of bacteria entering the egg. So, the older the hens the better the hygiene should be. In practice, the opposite is noticed. Dust, dirt and manure accumulates between the ridges of the nest mat. Just shake the mat over a lightly coloured surface and you’ll see. In a total production period with an average of 45 birds per linear meter of laying nest and 170 eggs, it means that within that meter more than 7,500 eggs are laid. So you can image that it will get dirty. Therefore, clean the nests regularly by cleaning and disinfecting the nest mats. Replace broken or worn nest mats in time and do not wait until the end of the production round. An egg from a dirty nest is as bad as a floor egg.

L LOOK-THINK-ACT

Why are there claw marks on this egg? Claw stripes may indicate old, worn mats. Eggs laid on these mats will not roll away as they should. Check the surface (slats/shelf) in front of the laying nest, it may be dirty. A hen that steps on it takes dirt into the nest easily. Usually it is also a signal of poor litter quality.

132

In a dirty laying nest you often see short stripes/dots on the eggshell. You may notice that these match the structure of the mats. It is aggravated when the eggs have not yet dried before they roll to the egg belt. Therefore, make sure that the nest mat is of good quality, that there is good hygiene and that the house is well ventilated.

B re e d e r S i gnal s


Maintaining litter quality Over time, the quality of the litter often decreases. However with good litter management and attention to detail, this can be prevented! Wet litter leads to the formation of ridges on the floor of the house. In wet conditions, the foot pads are often already affected and painful by the time you notice an issue, both for the males and the females. This can make it more difficult for the males to mate, especially in combination with a house with ridges. Ridges usually occur because the feeding system is not winched up. The birds spill feed and scavenge it from underneath the feeding system, pushing the litter in the area to the sides. If the litter is wet at this time and the top will be compacted and become hardened (caking). Lift the system high enough that the birds can freely scratch underneath it. In addition, wet litter increases ammonia concentrations in the house, which is bad for egg quality and foot health. Poor litter is therefore bad for fertility, the quality of the hatching eggs and the general health of the birds.

Scattering grain on the floor in the afternoon stimulates natural foraging behaviour. While scratching to find the grains the birds prevent compaction of the litter and allow it to dry. Scratching is good for leg strength of the heavy birds and it increases mating behaviour because males and females interact more. So many benefits.

Males are especially vulnerable to bad litter. They are heavy, have large feet and walk around in the litter all the time. Lumps of wet litter cling to the foot pads, as you see here, causing infections.

If the litter is not good, then leg problems can occur in males: e.g. bumblefoot. Foot pad problems lead to reduced mating behaviour and lower fertility.

These birds all have irritated eyes. This could be due to high levels of ammonia. 8. P ea k p ro d u c t i o n t o en d o f l ay

This is a heavy male. Heavy males are more likely to have leg problems (especially in combination with mediocre litter). A male with abnormalities of the legs is also less able to walk; it is more difficult and more painful. This will hinder the bulging of the cloaca and the ejaculation, with the result that full mating will not take place. Replace heavy males with new ones in time. 133


134

If the litter forms ridges, it’s a sign of dropping cold air (condensation), check the ventilation. When feeding lines are lifted, the birds can loosen the litter there. The caking on this photo occurs against the slats.

High ridges in an old poultry house with static feeding lines. Nowadays, most feeding lines are lifted up daily. Frequently removing ridges helps to maintain a good litter quality.

The litter must always be dry and slightly loose. There shouldn’t be too much sticking to your hands or boots. The litter in this picture is not good. If your boot doesn’t come up clean there is a litter issue.

Good litter is loose (more than 60% dry matter content) and therefore gives less cause for softening and irritation of the footpads. Poor quality litter has a dry matter content of less than 40%.

Check the floor under the litter. If it is wet (dark coloured) you have not ventilated sufficiently or the floor was too cold. Floors do not get cold throughout the house at 35 weeks, so this is a signal of a larger issue. Sometimes there are wet spots if the connection of floor and wall is not good and the outside temperature suddenly drops.

Keep the house lights clean so that they provide sufficient output and do not allow dark spots in the house which can lead to an increase in the number of floor eggs. Prevent shady places, especially in the front and back of the house (risk of floor eggs). Place an extra light source if necessary, to make these areas less desirable to your birds. B re e d e r S i gnal s


Feeding after the peak

7 to 10 days after peak production In order to ensure that the hens do not gain too much weight after the peak production, you should start reducing feed 7 to 10 days after reaching the peak production at the latest. The birds are entering a different phase of their lives. Therefore, switch to a more suitable feed type for their new needs. Even though you reduce feed intake per day, the flock must continue to grow each week after 30 weeks to maintain high production levels from 40-50 weeks onwards (persistency, shell quality, fertility). The reduction of feed intake should be

done very carefully and, if necessary, even increased (in autumn and winter flocks). Don’t go over 20 grams per week growth to ensure that the egg weight rises only slightly during this time.

No daily growth = half the flock is losing weight! If the average weight development does not indicate any growth, this means that some of the birds are growing and some are losing weight. Your flock must never lose weight! Make sure that the weight progression indicates increasing growth per week.

Production index A handy rule of thumb for the productivity of a flock at different ages is the ‘production index’. This is easy to calculate: age + laying percentage. 120 points is okay, 125 is super and 115 is too little. This is easier to remember than knowing exactly what laying percentage belongs to what age. From 30 weeks onwards, the laying percentage may therefore be reduced by 1% per week in order to keep the production figure at 120.

Egg production (%)

After 30-32 weeks the egg production declines, the birds are almost at maximum weight and the eggs become heavier. Shortly after the peak production (early photo stimulation around 21 weeks of age) at about 224 to 231 days (32 - 33 weeks) the peak in egg mass occurs. At this moment, the females have reached their maximum nutrient requirement. You must adjust the feed supply to avoid oversized eggs. A lower feed rate after the peak in egg mass is needed to prevent future issues. Excessive growth after the laying peak leads to overweight birds and a lack of persistency in production and fertility. If the birds reach the laying peak earlier, the peak feed rate may be slightly lower. The feed intake after the peak is always in function of the production. If you’re late with this decrease, you’ll have to feed more for maintenance for the rest of their lives.

100 90 80 70 60 50 40 30 20 10 0

30 weeks + 90% = 120 40 weeks + 80% = 120 50 weeks + 70% = 120 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 Age (weeks)

Feed intake time

In this period between peak and end of lay, the time of feed intake between distribution and clean-and-empty feeding system should be 3-4 hours for mash, 2-3 hours for crumb and 1-2 hours for pellets. Faster feed intake is a signal that you are not feeding enough. Slower feed intake is a signal of overfeeding, unpalatable feed or feed that is too fine (in the case of mash). Slower feed intake can also be due to a decrease in water intake, so keep a close eye on the flock’s water usage. 8. P ea k p ro d u c t i o n t o en d o f l ay

135


Effect of protein intake on embryo mortality (age 45-60 wks) High crude protein (21.5 g/day)

Low crude protein (19.4 g/day)

Embryo mortality 1-9 d (%)

4.0

3.7

Embryo mortality 10-21 d (%)

5.7

4.7

2nd grade chicks (%)

2.3

1.7

There is a direct link between a lower crude protein intake and a lower embryonic mortality. Therefore, in order to increase the number of chicks, older breeders should consume less protein daily during the laying period, in combination with a higher energy value.

Energy requirement partition 100 90 egg production

ME requirement (%)

80

Adjust according to circumstances If, after a feed reduction, production declines faster than expected, go back to the previous feed rate and maintain it for five days before applying any further reduction. Around 45 to 50 weeks of age, you usually switch to breeder feed 3, the last phase until the end of lay. Here too, the birds must continue to grow slowly. If the flock has its peak production during warm weather conditions, the feed should be reduced earlier and faster. The feed intake time remains the control tool. A rule of thumb is then: from 26°C to 30°C you give 2 grams less feed per degree of temperature increase. From 30°C you reduce the feed intake with 3 grams of feed per degree of temperature increase.

growth

70

Protein in the feed

60 50 40 maintenance • body weight • feathering • immunological status

30 20 10 0 20

25

30

35

40

45

50

55

60

Time (weeks)

At the start, much of the energy in the ration is needed for growth and later it is used for egg production. Maintenance is always a large portion of the energy budget due to the relatively high and continuously increasing bodyweights. You cannot cut the diet as insufficient weight gain reduces egg production. The weight gain must be very gradual in order to prevent persistency and fertility from deteriorating. Broiler breeders need much more energy for maintenance than laying hens (appr. 70% vs. 50%).

After 40 weeks of age you increase the difference between the energy and protein levels in the feed. This is mainly done by adjusting the protein content, which you reduce more and more. The energy content remains the same or even goes up a bit as the birds become heavier and have less feathering. The energy and protein content in the diet are guided by your choices of raw materials. A low crude protein percentage in the feed scores better on sperm production (in terms of volume and fertility) than higher percentages of crude protein.

Effect of crude protein on hatchability

Hatchability (%)

94

hatch of fertile eggs

92 90 88

hatch of set eggs

86 84 82 80 10 % CP

12 % CP 14 % CP Protein content of diet

16 % CP

During the last 15 to 20 weeks of the laying period, use a feed with a lower crude protein content (approx. 13%) and, of course, a lower amino acid content. This results in a higher hatch rate.

136

B re e d e r S i gnal s


Condition/conformation of males To get a good idea of the conformation/condition of the males, feel the keel bone with your hand, where you can assess the shape, size and muscle tension (firmness) of the breast meat.

This male is severely leaning forward because of very heavy breast muscles. Or he is trying to relieve sore joints or legs (inflammation of legs and/or foot pads). Remove this male because most mating attempts will fail.

Two males. One is underdeveloped (left) and one is overdeveloped (right), with regard to fleshiness.

This is the bird on the left: too little breast muscle. A pointy, V-shaped chest with a clearly present and easy to feel sternum.

This is the bird on the right: too much breast muscle. A rounded, U-shaped chest with no clear sternum.

Signals of male condition around 40 weeks Condition score below target

Condition score on target

Body weight above target

Condition score above target Fat birds. Check feed distribution and separate-sex feeding. Feed just to maintain body weight.

Body weight on target

Consider an additional feed increase and investigate the declining condition.

Body weight below target

Give an additional feed increase. Investigate feed volumes, feed distribution and separate-sex feeding.

8. P ea k p ro d u c t i o n t o en d o f l ay

Perfect situation. Stick to recommended feed increase.

137


Spiking and intra-spiking

Total sexual activities

Effect of intra-spiking on males’ activity 200 control

150 intra-spiking

100 50 0 30

35

40

45 Age (weeks)

50

55

60

Intra-spiking stimulates all of the males. Even the old ones! This has a direct effect on the percentage of fertile eggs.

Effect of spiking on hatchability spiked at 40 weeks

Hatchability (%)

90 85 non spiked 80

double intra-spiking at 40/48 weeks

75

70 65 25

30

35

40

45

50

55

60

Age (weeks) Introducing new (spiking) or old (intra-spiking) males in the flock 1 to 3 times has a positive effect on the hatch rate of the eggs. Introducing new males once (spiking) gives a better result than intra-spiking twice.

Male presence in a flock

In some countries, additional ‘spiking males’ are used. This means that young, more active males are added to the flock from about 40 weeks of age. Inactive males are removed. Spiking increases the risk of pathogens as you are introducing birds from outside of the flock. From that point of view it is better not to add males at all. Spiking keeps the production of fertile eggs at a higher level. It is important to use only adult males (from 26 weeks) and the heaviest males in the group of young males (> 4kg). Smaller and younger males will not be accepted in the flock. Intra-spiking – changing older males on the same farm from one compartment/house to another – is sometimes used to improve the activity of the males, and thus fertility. This reduces the risks for biosecurity and saves money. However, the effect of intra-spiking is less pronounced than normal spiking. Spiking can be stressful for the birds because the aggressiveness of the males may increase. New battles may break out as birds seek to establish a hierarchy. It is preferable to place males at night, and near the male feeding system. Routine spiking is usually done as a kind of ‘insurance’ against declining fertility results in the second part of the production period. However, if you add/replace when the fertility problems become evident then you are already far too late. If spiking is needed, replace 20% of the males in a couple of weeks, certainly not more. Too many fanatical young males may be counterproductive.

Males (%)

current practice

desired?

20

30

40 Age (weeks)

50

60

Ideally, you start with a low percentage of males (4-5%) and add new males gradually to compensate for the declining quality of the older males. In practice, a high number of males are introduced and, due to selection, their number gradually decreases. If a relatively large number of males die or are selected at times, you must add males to compensate for this (spiking).

138

Exchange 20-30% of the old/original males between houses of the same farm, after 40 weeks of age (1 to 2 times). This is called intra-spiking.

B re e d e r S i gnal s


Male persistency In practice farmers start with 9-10% males in order to end up with about 7-8%. At about 2/3 of the production period the males are kind of worn out. Mortality (including grading) is higher than for females. This is caused by the origin: the male line is selected for growth; this has a negative effect on persistency. The result: a lot of males are introduced at the start to have enough left at the end. Although not easy, it is better to have about 6% at start and 9% males at the end. You can achieve that to keep males in a separate room and start adding these males gradually on a weekly basis (starting at 30 weeks). In flocks with spiking males: when weighing, weigh only the original males. Spike males are lighter and otherwise this would give you a wrong impression of the average weight. You can recognise them by their narrower chest width and shorter spurs.

LOOK-THINK-ACT

Why don’t the males eat at the same time? Make sure that all males eat at the same time and make sure that as few females as possible eat with the males. If not all males eat at the same time, ask yourself why: is there enough feeding space for all males? Are some males too frightened to eat with other males? Does the feeding system function well? Check the feeding system. Also measure the height of the feed line.

During weighing, immediately assess the condition, conformation and colour of the cloaca.

You can mark original males in order to recognise them quickly and identify sexing errors in the mixed flock. You can see which ones they are and how they develop and mingle in the flock.

A new young male in an old flock. In the back you can still see an original male. 8. P ea k p ro d u c t i o n t o en d o f l ay

The disadvantage of a mark is that it can attract the attention of other males and thus lead to pecking and aggression. 139


Signals from egg weight

Laying pattern and flock age Nest-laid eggs (%)

30 25 young (35 weeks)

20 15

old (60 weeks)

10 5 0 4

5

6

7

8

9 10 11 12 Time (hours)

13

14

15

16

17

The laying time shifts with increasing age. In a young flock, 80% of hens will lay during the first 7 hours of light. Later in the cycle this becomes closer to 60%. Take this into account when collecting the eggs. In older flocks you see more spread, so collect eggs more often in that phase.

Egg production (%)

Quality of eggs and flock age

X

~

Prime eggs

~

Flock age The first eggs from a flock are not suitable as hatching eggs (below 50 or 52 gram), these small eggs are used for consumption. The best eggs are produced around peak production and about 20 weeks after that.

The egg weight depends on the body weight. The egg weight is therefore a good signal for changing body weights. It is also easier and more efficient to weigh eggs than to weigh hens! Morning eggs are up to 2.5% heavier than afternoon eggs. Therefore, always weigh the eggs at the same time for good insight on development. If a hen receives too little energy, does the egg weight go down first and then the body weight? Or does the body weight go down first and then the egg weight? Opinions are divided. As hens grow older, the eggs will normally also become considerably larger. The difference between an old and a young flock is almost 10 grams. After 60 weeks one-third of the eggs laid are heavier than 70 grams. This is breed dependent. There is a connection between egg weight and hatchability: the larger the eggs, the lower the hatchability. For larger eggs, the eggshell is thinner and more vulnerable. Provide more calcium in the feed from 45 weeks in order to maintain the quality of the eggshell. The uniformity of the eggs is worse in a flock with older birds. This automatically means that the uniformity of the offspring (broilers) will be worse. If you collect the eggs every day at the same time, you will be able to recognise fluctuations due to abnormalities more quickly. Everything decreases with age. Fertility and hatchability rates also decrease, and there is more embryonic mortality. Optimal management is required to limit this negative trend and maintain the quality of your hatching eggs. Nowadays, the focus is mainly on keeping the eggs small after 45 weeks. After all, fewer large eggs means a higher overall shell quality.

Influencing increase in egg weight 5-day-average increase in egg weight

How to act

> 0.5 g

remove 2 g of feed

0.4 g - 0.5 g

don’t touch the feed

< 0.4 g

add 2 g of feed

The increase in egg weight per 5 days should be about 0.5 gram after peak production (0.1 g per day). If it is more or less you can adjust the daily feed ration using these simple guidelines.

140

B re e d e r S i gnal s


Feathering at end of lay A good quality feather cover is also important later in the production period, in order to prevent skin damage to the females as a result of mating behaviour. If feather loss is not compensated with feed (more energy loss), there will be a decrease in production (spontaneous moulting) as well as reduced fertility and hatching. Especially in the last 10 to 20 weeks of production. However, females that don’t visit a laying nest have very nice-looking tail feathers. Broken tail feathers in an older flock is actually a good signal. Pick up females with a nice tail and assess whether they are laying at all. Or have they moulted and started laying again?

Never underestimate the effect of baldness on energy demand. A completely bald breeder should receive as much as 15% extra per day in European climates. In curtain houses in southern Europe, this is even higher when the temperature drops below 15°C at night. In contrast to laying hens, for breeders the feed supply sometimes must be increased at the end due to the additional need for maintenance and at least partly due to poor feathering.

Effect of feather cover on maintenance feed requirements Description

Effect on feed energy requirement

Feather cover fully intact

+ 0%

Small bald patches on back and flanks

+ 5%

Large bald patches on back and flanks

+ 10%

Bald back and flanks

+ 15%

The balder the birds are, the more feed they need to keep warm. Shown is the effect at 20°C ambient temperature.

In case of troublesome, aggressive males, the females’ feathering quality drops faster. Here, you see that the males are still (too) well-feathered mainly in the litter, with (too) bald females on the slats.

Deteriorated feather cover in females in the second half of the production period. This is normal. Hens usually don’t look good after 50 weeks with good production, while they are quite often kept for up to 65 weeks (production index=120). 8. P ea k p ro d u c t i o n t o en d o f l ay

You can see on this infrared heat camera that in places with little feathering the heat loss is greatest. Balder birds therefore need more feed due to higher energy requirements to keep the body warm.

141


Moulting

L LOOK-THINK-ACT

Chickens in nature moult once a year to have a good, warm feather cover for the winter. This is intensive and requires a lot of energy. As a result, moulting chickens are weaker and production is declining and stops. During the production phase you want to prevent the females from moulting. A moulting hen looks a bit bald, is less active and no longer lays eggs. The hen looks a bit paler, thinner and is a lot quieter. During moulting she will also be very low in the pecking order. After moulting, males hardly produce any sperm. The male is then lost for reproduction. A very small egg (size of a 1 or 2 euro coin) is a sign of a moulting bird. It is the last egg produced before she stops laying eggs.

Why is this female hiding? This female has few feathers. The fewer feathers a female has, the more sensitive the skin and the more likely it is to be damaged. These females are more likely to withdraw from mating and are at an increased risk of death.

Feathering at end of lay

Female

Good feathering

Bad feathering

Male

Reasonable feathering 142

Bad feathering B re e d e r S i gnal s


Forced moulting In some countries forced moulting is applied at around 55 weeks of age. This is done by shortening day length to max. eight hours, providing no feed and water for some days. After that, conditions are slowly returned to normal. After 3-4 weeks the hens have returned to the old situation. After this moult, the hens go into a second production period of 30 weeks. A peak egg production close to 80% in the second laying cycle is possible with a good flock; this gives the chickens a longer lifespan and makes them cheaper, but it is far from being bird-friendly. In the EU, forced moulting is not allowed.

LOOK-THINK-ACT

End of lay Normally breeders are depleted around 60 to 65 weeks of age (depending on the region). The exact end of the laying period of your flock depends on market conditions. If there is a high demand for hatching eggs, the females are kept longer. Sometimes production and fertility remain at such a good level that the females can be kept for a longer production cycle. In the United States, for example, the females are kept for up to 65 weeks, but there the females also start their production later. Of course, when the perfomance results or market conditions are bad, birds may be depleted earlier. The limit for a depleted flock is often 70% egg production, 70% hatchability or a combination of both. Lower than this, too many poor-quality eggs are produced, and the feed conversion rate becomes too high to be profitable.

Emptying the house. The timing of this depends on hatching egg pricing, production level, meat prices and planning of the new flock. 8. P ea k p ro d u c t i o n t o en d o f l ay

Why is this female moulting? In this phase, older females sometimes start to moult spontaneously. Spontaneous moulting is caused by stress and disease problems (water shortage, energy shortage, latent diseases, etc). You can recognise these hens afterwards by their thick full feathering and recent feather growth. You can check the space between the pelvic bones to see if they are laying. After moulting she will be laying small eggs again to start with.

After a moulting period of 6 to 8 weeks these hens develop new feather follicles and will be in a beautiful feather cover, while all of the other females are not looking their prettiest... These moulted hens will only lay small eggs if any. Therefore, avoid poor conditions to avoid pushing the birds to moult. 143


CHAPTER 9:

Egg handling and storage

Up to 80% of the results in the hatchery depend on the quality of the hatching eggs. On top of that nothing can be done to correct a poor-quality egg, once laid. For that reason you have to take care of the hatching egg all the time. Also you have to realise that any contaminated eggs ruin the quality of all other eggs in the same setter.

Hatchability usually declines with the ageing of the breeder flock. If hatchability is below 84% you should wonder why. Eggs from very young breeders have a lower hatchability and poorer quality chicks. Best hatch rate are from parents between 30 and 50 weeks of age. You can already see directly after laying whether an egg is fertile or not by the germinal disc on the yolk. You might say: if you open an egg there is 50% chance that you can see the germinal disc and 50% that it is on the other side of the yolk and you cannot see it. However, the yolk always turns with the germinal disc on top, so you can always see it. The goal of this phenomena: in nature,

144

the mother hen heats the egg from above, so the optimal position would be on top close to the egg shell. So the yolk floats on the egg white with the germinal disc on top.

You can estimate the chick weight by taking 2/3 rd of the egg weight + 1 gram. A 52-gram egg, for example, produces a 36-gram chick.

B re e d e r S i gnal s


45 gram

50 gram

60 gram

A good hatching egg weighs at least 50 grams (minimum requirements differ per geographic region) with a maximum weight of 70 grams. Smaller eggs can be set, but the chicks require more care and should be housed in a different pen/house. A rule of thumb: a 50-gram egg can be placed between your thumb and forefinger along its length. Try this and check with a scale, because not everyone’s fingers are the same length.

Critical points at the broiler breeder farm

4 mm

2 mm

Moment

Quality risk

Before laying

Breed characteristic (size and form) Bad fertility

Around lay on breeder farm

Incorrect quality of hatching eggs (too round, too long, infertile, dirty, etc.) Floor eggs (100x higher risk of bacterial rot) Rough treatment Lack of hygiene (dirty nests, transport belts) No good, healthy broiler breeders Damage to the eggs (cracks and dents)

Storage on breeder farm

Cooling down too fast Incorrect climate (and not uniformly distributed) Incorrect storage conditions (temperature fluctuations), sweating eggs Stored for too long Insufficient hygiene Damage to the eggs Malfunctions

Transport

Climate conditions not in order Shocks while driving Influence of outside temperature Insufficient hygiene Malfunctions

Already at lay, a fertilised egg shows the first development of the embryo on the yolk as a circular structure of about 4 mm (blastoderm). Total yolk size is about 60 mm. An infertile egg only has a small white spot on the yolk of about 2 mm.

ᅚ

How to get clean eggs Floor eggs •

•

X Assessing fertile and infertile eggs by breaking them is time consuming. It is easier to install a small hatching machine (e.g. for 30 eggs) and in a few days you can candle them without breaking. To avoid using valuable eggs you could use floor eggs, since for assessing fertility rate this doesn’t make a difference. Try to find out whether infertile eggs are from a specific house or part of a house. 9. Egg h a n d l i n g a n d s to rag e

•

Cleanliness

Try to prevent floor • eggs as much as possible. Collect floor eggs separately and as often as possible per day. Keep them separate from the other hatching eggs. Register the number of floor • eggs and dirty eggs and take appropriate management measures.

Make sure that the inside of the nests and the egg conveyors remain free of litter and manure. Nests and conveyors should be cleaned at least once a week and checked for dead birds every day. Prevent hens from sleeping in the nests or shy hens from hiding themselves in the nests.

Collection moments •

Collect eggs several times a day. Most of the eggs are laid in the morning. Adjust your collection times accordingly. The nests and egg conveyor must be emptied every day at the end of the day, so that no eggs are left lying around overnight.

145


Not suitable as a hatching egg Grading at egg collection is an important task in order to select the best hatching eggs, the ones that are not perfect, but still acceptable and the ones that should be thrown away. Dirty eggs might be washed and still used, but of course this should not be standard procedure. Prevent inferior eggs to start with. Washing is only an alternative if you have to discard the eggs otherwise.

146

A good hatching egg.

Blood smear on egg. Wounds around cloaca? Should be washed.

Slightly dirty, possible dirty laying nest. Should be washed.

Egg soiled with droppings. Should be washed.

Point damage, egg landed on a hard surface (replace nest mats?). Unfit for hatching.

Wrinkled egg. Unfit for hatching.

Side-slabbed egg. Unfit for hatching.

Pin hole. Part of shell is sucked into the egg during cooling down. Unfit for hatching.

Definitely too dirty, this egg should not be used as a hatching egg.

B re e d e r S i gnal s


Hairline cracks Eggs with hairline cracks can cause as many problems as more serious damage. The hatch rate of these eggs is 25% lower than eggs with an intact shell. The egg content is also more likely to be contaminated with pathogens. As a result more chicks are of inferior quality (selected in the hatchery), and there is a four times greater mortality rate among

chicks hatched from hair-line cracked eggs, up to two weeks of age, when compared to normal chicks. Your problem is that hair-line cracks eggs are hard to notice in fresh eggs at egg collection. Even after storage you have to be experienced to notice these cracks. You can sometimes recognise hairline cracks by a faint grey line on the surface of the eggshell.

By holding a light behind the egg, you can highlight any hairline cracks.

You can also recognise hairline cracks by gently tapping two eggs against each other. You are able to hear the difference between a good egg and one with a hairline crack.

Fertile

Good quality hatching egg

Egg with hairline cracks

81%

56%

Hatch percentage

74%

51%

Chick mortality

2%

7.5%

Infected or broken eggs

1%

5%

source: Pas Reform

A longitudinal crack in the middle of the egg points to a problem with rolling from the nest to the egg belt, or between two belts. The eggs roll against each other sideways.

9. Egg h a n d l i n g a n d s to rag e

A crack at the blunt end or on the pointed end indicates a hard nest floor, excessive dropping height, or a fault in the egg turning device or dropset that puts them into egg trays.

147


Large and small eggs

Eggs that are too small. The old-fashioned analogue scales are often quite accurate. Digital scales may give a very precise result, but regularly check this. While it looks accurate and modern, it may not be in reality.

On the egg belt you can see a lot of variation in egg size.

40 g

50 g

60 g

This is what a double yolk looks like under the candling lamp. Two dark spots are visible at the bottom and at the top. Those are the two yolks.

70 g

Variation in egg size is unwanted, since it will also mean more difficulties in hatching, more variation in chick size and therefore a less uniform broiler flock.

148

Production of up to 4% double yolks at the onset of lay is not unusual, while more than 6% double yolks is a signal of over-stimulation. Double yolks are unsuitable for setting, because a chick seldom hatches from them. Double yolks can also be an important signal of too much laying stress, or a result of over-stimulation with feed because of an incorrect weight profile in the rearing phase or just before start of lay. These hens were likely given too much feed at the start of lay to force them to lay and/or too sharp an increase in daylength was introduced. Especially in open houses this can be a problem. From smaller eggs you get smaller chicks that require extra care. In addition, the simultaneous incubation of normal and small eggs in the incubator results in less uniform hatching results, as both types of eggs require different hatching conditions. That’s why you should set them separately.

A broken double yolk. The yolks are often close to each other and therefore do not each have their own thick white layer around them.

B re e d e r S i gnal s


Shell quality An egg must be porous so that during the incubation process there is sufficient gas exchange (CO2 out and O2 in) for the growing embryo. Porosity of the egg can be determined from the weight loss during storage and during hatching. The average egg has about 10,000 pores. The cuticle, a protective layer over the outside of the egg, is meant to prevent bacteria penetrating the egg. This cuticle has no visible openings but is permeable to gases. The thickness of this cuticle is between 0.010 mm and 0.005 mm.

A 70-gram egg has as many pores as a 60-gram egg despite its larger size. The larger eggs are more difficult to hatch because too little gas exchange may cause embryonic death. Therefore, do not let the eggs become too heavy at the end of the laying period. Also, larger eggs are more vulnerable to egg breakage.

Characteristics of the egg Outer shell membrane

Air chamber - (also called air cell) the space between the inner and outer shell membranes.

Inner shell membrane Yolk or vitelline membrane - forms a barrier between the yolk mass and the albumen.

White yolk - the initial feed source for the developing chick, is quite different in composition from the yellow yolk.

Germinal disc - this is where the chick develops after fertilisation.

Outer thin albumen (white) - the layer between the thick albumen and the eggshell membranes.

Shell membranes - provide protection against dangerous bacteria and form a base layer for shell formation.

Chalazae - twisted structures derived from the albumen which hold the yolk in the centre of the egg.

Yellow yolk - provides the remainder of the nutrition for the chick. Thick albumen (white) - a nutritional and water source for the chick, has antibacterial properties and acts as a shock absorber. Inner thin albumen (white) between the yolk and the thick albumen.

Eggshell - protects the egg contents and regulates air exchange through gaseous exchange pores.

Cuticle (bloom) - protects the egg contents by sealing off the gaseous exchange pores which run through the shell.

The egg has a multi-layer protection against microbial contamination. The cuticle, egg shell, shell membranes and certain proteins act as physical or chemical barriers.

9. Egg h a n d l i n g a n d s to rag e

149


Drying and cooling

Cooling and nest types

Directly after laying, you might say the storage period starts. So you have to try and maintain the hatching egg quality immediately. This means the egg has to dry and cool down. Drying is essential to prevent dirt from sticking to the surface. Cooling causes the development of the air cell (also called air chamber). If the egg stays too warm in this period before egg collection, the embryo will start to develop.

In most countries, automatic nests are preferred, as they are often cleaner and allow more air movement around the egg. This will help cool the egg quickly. In case of manually-collected litter nests, there is regularly a hen on the eggs already laid and the eggs cool down very slowly, in these cases the embryo can sometimes start developing even before the egg is taken to the hatchery.

at lay:

after lay

40°C

20°C

At lay, the egg temperature is 40°C and no air cell is present, yet. Just after lay, egg temperature drops to about 20°C. The contents shrinks slightly, but the shell maintains it size. Therefore air is sucked into the egg through the pores of the shell: the air cell is formed. But, with the air, contamination can also be sucked in as well, decreasing the quality of the hatching eggs.

0 sec.

5 sec.

Cooling eggs is a natural and necessary process. The hen also lays eggs intermittently and leaves the nest which cools down the egg. As a result, embryonic development is temporarily halted, but the quality is maintained.

10 sec.

The eggs must dry quickly after laying. This is important for a good hatching egg quality. After laying, it takes 2-3 minutes for the cuticle to dry and harden. In these few minutes, it is possible for bacteria to pass through the cuticle and enter the egg through the pores. Therefore, floor eggs are of inferior quality and the hygiene in the nests must be very high. Also, the temperature difference should not be too large as the eggs cool. As the egg cools, the air chamber is created and there is a chance that bacteria on the shell surface will also be sucked in; this is why it is important to ensure that the egg is not laid in a dirty environment.

150

B re e d e r S i gnal s


Egg collection The eggs can be transported from the nests by conveyor belt or collected by hand. Manual collection is very labour-intensive. With automatic nests, the quality can be better if all transitions on the conveyor belts and the packing are smooth and well maintained. It is a myth that manual collection is always better. Among other things, it depends on the type of nests and frequency of egg collection. If the eggs get wet after collecting, due to differences in temperature and humidity in the house compared to the storage room, this increases the risk of contamination. Water or mechanical cleaning damage the dried cuticle, reducing its protective effect, creating a risk that bacteria may penetrate. This also a risk when washing eggs.

Manual egg collection In nests where eggs are collected by hand, there is a greater chance of dirty shells. This is because the eggs do not roll away immediately and therefore are more easily stained by the legs of the hens and any manure, blood or dust in the breeder house environment. Also, leaving the eggs in the nest can cause breakages and make the litter and other eggs dirty. It is also important to change the litter in the nest at least once a week. Litter is often used in hand-collected nests. This means that the eggs stay warm for a longer time. As a result, the final production is lower and less uniform. The hatching results from farms with manually-collected eggs are approximately 5% lower than for farms with automatic nests. The percentage of dirty eggs is approximately 2% higher for farms using manual collection. Frequent egg collection prevents the start of the hatching process, at least 4 times a day at a breeder farm.

Breeder house with manual laying nests.

The requirements of hatcheries are often that the farm or breeder house number is printed on the egg.

Often eggs are collected once or twice per day. In Asia often four times per day due to the warmer and humid climate. A reason not to collect too often is the tendency to speed up the collection belt a bit if the number of eggs is low. Result: shocks, cracks, etc.

By attaching a broom under the egg belt, the belt is continuously cleaned as it rotates. A simple and effective solution to prevent dust stripes on the eggs. However, it only cleans visible organic material and doesn’t decrease the bacterial loading. Clean/replace this brush regularly in order not to make it a source of infection instead of a cleaning device.

9. Egg h a n d l i n g a n d s to rag e

151


Egg grading

Automatic egg grader. The heavy eggs are separated on the left side, the eggs that are too small on the right side. The rest are packed for further storage.

152

The grading of the eggs can be done both at the breeder farm and at the hatchery. The purpose of grading is to set only first-class hatching eggs. Weigh a fixed number of eggs every day, ideally at least 100 eggs. Do not take the first collection, because it may still contain eggs from the previous day and that does not give a representative picture. Weigh trays when they are full and empty and then divide the difference by the number of eggs. Always weigh at the same time, because the weights of the eggs vary throughout the day. In the afternoon the eggs are often a little lighter. The development of the egg weight is an important signal for flock management. The cause of poor uniformity of the eggs often lies in poor uniformity of the flock. This is usually due to deviations in the feed and water system, insufficient feed trough length, and so on. As the flock ages you regularly see large differences in egg size because a number of birds spontaneously go into moult. These birds start laying eggs that are much lighter.

A manual grading point. The obviously defective eggs are selected out here.

Minor soiling can be removed with your fingernail. With soft droppings carefully wipe it with a paper towel. Make sure you don’t touch any clean parts of the egg.

On the belt you already see a lot of differences in size. The larger the variation, the more risk that some of the eggs will be incubated too hot or too cold. This is not good for embryonic development and therefore for the quality of the chickens. Large eggs (from old breeders) also run a greater risk of transport damage due to a thinner shell, but also because they do not fit very well in the transport trays.

Scraping off dirt with a scouring pad is not advised. When lightly soiled eggs are wiped, some of the dust you produce will accumulate in the pores and block them. This inhibits gas exchange. In addition, the chance of contamination increases, because the protective cuticle is damaged and bacteria may penetrate the shell.


Packing eggs At the breeder farm, the eggs are often put on plastic trays (farm-traying). That saves time later on at the hatchery. If the eggs are intended for export, they are often placed on a pulp tray. If you have a disinfection step on-farm: Preferably do not use wet disinfection methods. If eggs do get wet, let them dry before you treat them or place them in a cold egg storage.

If the eggs are put on the trays directly, select and pack the eggs immediately after collection.

L LOOK-THINK-ACT

Stacking machine for pulp trays.

Is this trolley properly packed? On this thermal image you can see newly collected warm eggs that are placed under eggs that have been collected before. This is not correct. The heat from the lower eggs warms up the eggs above them, because heat rises. Fill the trolley from bottom to top so that the cooler eggs stay cool.

As soon as a trolley has been placed in the egg storage, it must remain there. Place trays in the trolley in the storage area, and do not remove the trolley from the storage area to refill it.

9. Egg h a n d l i n g a n d s to rag e

153


LOOK-THINK-ACT

Do you see the misplaced egg? Eggs should be placed with the point down, so that the germinal disc on the rising yolk cannot stick to the shell membranes. Sometimes eggs do end up in the tray the wrong way around. 95% of these misplaced eggs don’t hatch. In practice, this sometimes involves 4% of the total number of eggs incorrectly placed. This number should be below 0.5%. Check the adjustment of the collection machine. Two incorrectly placed eggs can be seen in the 5th row from the bottom.

If eggs are packed in boxes, make sure that the eggs are first cooled down to storage temperature (18°C) otherwise they will cool down too slowly and embryonic development will continue in the meantime. This is also the case when wrapping a pallet with plastic. As an alternative you could use net wrapping.

154

Cool down after collection Store the eggs in a separate room in which the temperature and humidity are controlled. The embryos must not be allowed to develop during storage. Therefore, the storage temperature should drop slowly to below 21°C within 6 hours after laying. Below 21°C, any embryonic development that started during fertilisation stops. At a higher temperature, the embryos may die or develop unevenly, causing abnormalities. But beware: bacteria on the shell can be pulled into the egg while it cools down, because the contents shrink slightly during cooling, creating the air chamber. Make sure that the cooling is very gradual! Even fresh eggs that end up in the middle of a pulp-tray halfway up the stack, cool down too slowly. Plastic trays or setter trays work better. Make sure that there is good air circulation in the storage area, so that the eggs can cool down more easily.

Point setting If you keep the eggs for more than seven days, you have to turn them every day. Eggs are stored point-down, because: • It reduces the risk of the yolk coming loose (chalazae are strongest at the tip). • When eggs are placed in the wrong direction, the chick develops with its head in the tip: there is no air chamber and the tip is the hardest part of the egg. Correct placing is much more difficult in rounder eggs. Train yourself. You can check if you’re doing it right by marking the presumed top and then placing it in water. The air chamber will always float a bit.

Heating and cooling are twice as fast on plastic trays as on pulp trays, because the air movement between the eggs is much higher. Do not wrap the trolleys in plastic until the eggs have all cooled down to storage temperature. Always use plastic with holes or gauze for sufficient cooling.

B re e d e r S i gnal s


Storage The storage temperature must be adapted to the duration of storage and kept as constant as possible. A temperature of 15°C is better than the usual 18°C for longer storage periods. The set temperature is determined in consultation with the hatchery. Don’t place a fan for cooling or heating directly on the eggs, since this will result in temperature differences in the eggs. Provide indirect ventilation. Regularly check the temperature distribution in the storage area, possibly with a heat camera. The storage area should have smooth floors and a smooth ceiling so that it is easy to clean. Clean and disinfect the room at least once a week and perform a regular bacteriological check. The size of the storage room depends on the size of the flock, the nature of the packaging material and the storage time. With a flock of 30,000 hens and a storage time of 7 days, approximately 115 m2 is sufficient.

Keep the space where the eggs are collected and stored clean and tidy. Make sure you have a good pest control. If the door of the storage room is often used, storage temperature will fluctuate too much. Don’t disturb the environment and make sure there is a lock and an automatic door closer on the door.

Relationship between storage period and storage temperature

After cleaning the storage room, disinfect the room. Here disinfection nozzles are installed to do this.

Storage period (days)

Storage temperature

1-3

20-23°C

68-73°F

4-7

15-18°C

59-64°F

>7

12-15°C

54-59°F

> 13

12°C

54°F

Preferably set the hatching eggs within 7 days. Storing for more than 7 days causes a reduced hatchability because cells of the embryo die off and the internal quality of the egg decreases, especially the quality of the protein. If longer storage is unavoidable, a cooler storage temperature will help to keep the yolk and protein in good condition. The longer the eggs are stored, the cooler the ideal storage temperature.

A hen will turn her eggs regularly. During storage you must also turn the eggs every hour at a turning angle of 38-45 degrees. In this way, you ensure a good distribution of nutrients and prevent the embryo from sticking to the shell membranes.

9. Egg h a n d l i n g a n d s to rag e

155


Humidity The humidity should be between 75 and 80% to prevent the eggs from drying out. Normally a hatching egg loses 1% of its weight per week. This is normal.

Effects of storage • •

•

• In this storage room the climate control units are just above the pallets.

156

An egg needs at least one day rest after lay before setting. Every day you store a hatching egg, it takes an extra hour of incubation time. At the hatchery, fresh eggs must be stored and set at different times. After 5 days of storage, the hatch rate is 0.5 to 1% lower for each additional day of storage. When stored for more than 12 days, the weight of the chicks is lower at hatch and the quality of the chicks decreases.

When cold eggs are placed in a warm, humid environment, condensation forms. This creates a risk of infection: water can penetrate the protective layer around the egg and bacteria multiply more quickly in a humid environment. Condensation also causes moulds to develop on the eggshell.

Take regular samples of the egg surface to check the hygienic status of the eggs. In this way you are able to monitor your processes. In case of low hygiene: check the nests and egg conveyors and clean them. Do not mix washed floor eggs with originally clean eggs.

These eggs have fungal stains. Moulds are pulling in through the eggshell. A second danger of fungi is that they can quickly affect other eggs nearby.

Storage temperature and humidity meter in the egg storage room.

B re e d e r S i gnal s


Washing eggs Washing is not a good practice for hatching eggs so should never be a routine measure for all eggs! Whether or not floor eggs are washed differs per country. In some countries, all floor eggs are thrown away because of the likelihood of poor quality – especially with older flocks. Keep in mind that 1% washed floor eggs can cause all broilers to have to be treated with antibiotics at the broiler farm later. The best thing you can do to preserve chick quality is to destroy dirty eggs. Washing can cover up that the eggs were dirty on the outside, but on the inside, they are often already infected with bacteria. Never wash clean eggs! A lot of research has been done to show that chicks from unwashed eggs need little or no antibiotic treatment. A washed egg will never be a first-class hatching egg again, since you have removed the protective cuticle.

You can feel if an egg has been cleaned. It feels rougher because part of the cuticle has been washed away. Eggs with a good cuticle feel smooth. With UV light you can quickly identify whether dirty eggs are washed, rinsed or wiped clean.

Bangers burst open in the incubator and infect other eggs. This is caused by the accumulation of gases in the egg as it decays. Damaged eggs, soiled eggs, eggs with different shells or mould-infected eggs increase the risk: an egg infected with Salmonella that bursts open in the hatcher can infect all the eggs (and chicks) in the batch.

The cuticle is a waxy layer which prevents bacteria from entering the egg. You can tell when you washed it off. The picture on the left shows an intact cuticle: a drop of water beads on the egg. The picture on the right shows the cuticle has been washed off: the water runs off the egg and penetrates through the pores.

Example of a good washing machine: uses 3 times clean water per wash, rinsing temperature 42-45°C. 157


Washing procedures Points of attention when washing eggs Collect the dirty eggs several times a day and wash them immediately, as soon as possible after collecting them. • Washing can be done with softened tap water. • After every 150 eggs, the water must be changed if it is not already done automatically. • The washing water should be about 42 to 45°C, to prevent bacteria from being sucked into the egg as it cools. Avoid warmer water, otherwise the embryo will die. • Do not wash longer than 3 to 4 minutes and do not rub with a cloth as this will spread any bacteria and increase the risk of sucking in. • Use a detergent at a concentration of 0.5 to 1% in the washing water (5 to 10 grams/litre of water). • After washing, rinse the egg with sterile water that is slightly warmer than the washing water. • Then dry the eggs in a room at 22°C. The drying area must be dust-free and clean. • Make sure that the trays are not stacked in a way that the eggs cannot dry properly. • Remember that washed hatching eggs are always at greater risk of producing poor-quality chicks. That’s why you should always keep them separate.

Floor and soiled eggs have large numbers of bacteria and fungi on the eggshell. They can infect the embryo in the egg (bangers) or at hatching. Washing these dirty eggs reduces the risk of exploders, but this must be done properly and with clean water. If there is a shortage of hatching eggs, it can happen that dirty eggs are still set. Always set these eggs separately. Preferably do this in separate incubators (logistic incubation), so that chicks from dirty eggs cannot contaminate the good chicks from clean eggs. However, the chicks from dirty eggs are often mixed with a batch of chicks from good hatching eggs, which increases the risk of failure for the flock. Chicks from dirty eggs can carry harmful germs. Disinfection In most cases, disinfection is done at the hatchery by specialised personnel. If it takes place at the breeder farm at all, you must follow strict protocols in order to achieve the desired effect.

The washing water must always be warmer than 41°C so that it is always warmer than the warmest egg in the egg collection. The eggs are never uniform in temperature just after collecting (the eggs on this thermal image were laid within a period of two hours prior to this picture).

Make sure you use the right washing water temperature and that you don’t mistake Fahrenheit and Celsius. 100°F is a good temperature for washing water, but 100°C is boiling water; the embryo is lost, but you may have it for breakfast. 158

Deliver washed eggs separately and clearly marked, for example at the bottom of the container. B re e d e r S i gnal s


Candling and breakout Some breeder farmers have a small hatcher to randomly check fertility. This allows you to identify any abnormalities at an earlier stage. Otherwise you will only read this in the result report from the hatchery after 4 weeks. Inspection systems are not always able to distinguish between infertile and early death. Also, various diseases and abnormalities such as blood ring, black eye, etc, can’t be easily recognised by a machine, at least not yet. For this, you’ll have to break the eggs. You use a breakout form for a complete overview. A breakout gives a good

Fertile egg, but embryo died during setting.

picture of the fertility rate. After all, fertility and hatchability are two different things. The male’s sperm can be good and so can the fertility, but hatchability may still be poor. The results of the inspection process are input to help the breeder improve results. Breakout is used at the breeder farm to analyse whether eggs were infertile or if the embryo died afterwards and at what stage. There are many different causes, both at the hatchery and the breeder farm; good communication will allow you to troubleshoot and correct issues in future flocks.

Infertile egg.

Fertile egg, but early dead of embryo (blood ring visible).

Hatchability problems and their causes Problem

Farm

Hatchery

Early dead (1-7 days)

Inadequate egg collection Nutrition Floor/soiled eggs Fluctuating temperature during storage

Formalin exposure 12-96 hours Slow to reach incubation temperatures Condensation on egg surface Incorrect turning angle/frequency Long egg storage Fluctuating egg storage temperature

Mid dead (6-14 days)

Nutritional deficiencies Contamination

Embryo temperature too high

Late dead (15-19 days)

Nutritional deficiencies Contamination

Inappropriate incubator temperatures/humidity Transfer damage Eggs set upside down (tip up) Insufficient water loss

At pipping

Nutritional deficiencies

Inadequate turning/eggs set upside down Transfer damage Excessive fumigation in hatcher Long egg storage

Contamination

High levels of floor eggs Poor nest hygiene

Egg shell disinfection inappropriate Condensation on egg surface during storage or transport Thin or cracked shells High levels of contamination in the hatchery

Malpositions

Beak above right wing - nutritional deficiencies (linoleic acid) or heat stress.

Head in small end – egg incubated upside down, high incubation temperature or shallow turning angle Beak above right wing – heat stress Other malposition – causes unknown

Malformations

9. Egg h a n d l i n g a n d s to rag e

Exposed brain – high early incubation temperatures Ectopic viscera (exposed intestines) – high incubation temperatures mid-term Extra limbs – rough handling or jarring of the eggs during collection/transport

159


On-farm transport

Transport of hatching eggs

The hatching eggs must be moved to storage after collection: so-called on-farm transport. This must be done carefully, because the hatching eggs are very vulnerable. Check the transport route that the egg trolleys must take. Make sure the floor is evenly paved, preferably with tarmac or concrete (no cobble stones, brick road). Shocks may not only harm the egg shell, but also the embryo inside. Shocks cause damage to the germinal disc. With these hatching eggs you see reduced hatchability, especially with eggs from older hens (50-60 weeks), or abnormalities on the day-old-chicks.

Hatching eggs are the final and valuable product of the broiler breeder. Transport is a delicate final step to hatching. The major concerns when transporting hatching eggs are that shocks, temperature fluctuations and condensation should be prevented. Transportation should be as clean as possible: use new pulp trays, clean plastic trays and clean incubator containers. Work hygienically to prevent cross-contamination of pathogens: remove any residues of eggs on the trays, clean and disinfect so no pathogens can enter the breeder farm. Even the driver should not enter the breeder farm beyond the egg storage area.

Extra limbs were formed, caused by shaking and vibrations, prior to the hatching process.

With electronic eggs it is possible to map the course of the eggs. These eggs can indicate where the risk points in the system are. It is often the transitions between belts and/or worn nest mats that cause hairline cracks.

Logistic planning Hatcheries often collect eggs 2-3 times per week. If you collect them more frequently, you have more eggs from the same production date but smaller batches per production location (farm). A hatchery will try to set eggs with the same characteristics together as much as possible. If a choice is made as to which eggs are hatched together, the following priority order applies: 1. Origin (farm) 2. Flock age 3. Production date A few days difference in the production date of the eggs therefore weighs less heavily than a few weeks difference in the age of the flock. A higher frequency is often applied in order to get the eggs to the hatchery - where temperature and humidity is generally better controlled - as fast as possible. Once they are at the hatchery, the manager has more choice in eggs once he has to fill the incubators in an optimal way. If the eggs are at that point still on the farm, he would not have them available to set.

Avoid potholes and unevenness. When moving the eggs, they must not be subjected to rough handling, excessive vibrations or shocks. This influences the development of the embryo and can cause mortality or abnormalities in the chicks.

160

B re e d e r S i gnal s


Transport systems There are various systems for transport of hatching eggs that differ in: • Capacity • Shock proofing • Hygiene Don’t underestimate the weight of egg transport. You can easily pack 20,000 eggs per meter of truck length. At 60 grams per egg and a 12-meter length, this is 15,000 kg. If your transport is less compact (like on setter trolleys), you have half the egg capacity and therefore half the weight. Day-old-chicks are much lighter (from a 60-gram egg, you get a 40-gram chick).

Characteristics of various means of egg transport Pulp trays

Plastic pallet

Setter trolley

Setter trays on metal transport trolley

capacity

+

+

-

-

hygiene

-*

+

+

+

shocks

+

0

--

-

labour

-

0

++

+

weight

+

+/0

ventilation/ temp. control

-

0

+

+

- = negative effect 0 = neutral + = positive effect * Pulp trays and cardboard boxes are less good for hygiene when re-used. In case of single use (common for hatching eggs but increases costs), hygiene is good.

Hatching eggs in setter trays in setter trolleys. These can be placed directly into the setter.

Hatching eggs in setter trays in farm transport trolleys.

Hatching eggs in plastic boxes and trays.

Hatching eggs on cardboard/pulp trays for export.

9. Egg h a n d l i n g a n d s to rag e

161


Transport movements

Preventing cracks and breakage The main damage that occurs because of rough transport are hairline cracks, breaks, dehydration and embryo damage. During transport do not pull up or brake too hard. However, the movements most likely to cause cracks are sideways movements. It is also easier to secure carts down the length of the cargo space than across the width. Bumpers are proven to prevent damage. If you do not use air cushions, this results in 0.5% more cracks, up to a maximum of 4% lower hatchability and 0.5% embryo damage. Of course this is highly dependent on the quality of the roads, the trucks and the duration of transport.

Lateral: sideways. Caused by bends and turns, wind.

Horizontal: front, rear. Caused by accelerating and braking.

Vertical: up, down. Caused by potholes, speed bumps, etc.

162

Make sure the eggs don’t move during transport. In this case a simple solution does the trick: a few pulp trays as bumpers between two pallets. The boxes around the pallets secure a stable microclimate (especially to prevent condensation during transfer to and from the truck).

Besides driving carefully, bumpers in the truck can absorb shocks. Inflatable bumpers are empty when you load the truck. Once loaded, they are inflated creating a flexible soft cushion.

B re e d e r S i gnal s


Climatic conditions

Temperature (°C)

setting lay

setting transport

transport

transport

storage temperature

Ideally from laying to setting the temperature follows a U-form. For transport you could even cool it down a bit more to create a V-form. What should be prevented at all times is a W-form (unless it is on purpose: SPIDES).

Example: ambient temperature is 25°C with RH 60%. On eggs stored at 18°C, condensation will not yet take place (A). However, when transported in a truck at 17°C and temperature at arrival has risen to 27°C at the same RH of 60%, condensation will occur (B). In other words, all weather situations to the right of the black line will cause condensation of water on the eggs. Outside

Outside

Storage on farm

25°C, RH 60%

Truck

27°C, RH 60%

Storage in hatchery

18°C, RH 60%

dew point = 17°C = no condensation

17°C, RH 60%

dew point = 18,5°C = CONDENSATION

18°C, RH 60%

A

B B

idity

(%)

A

Hum

This can be read in the so-called Mollier diagram.

setting lay

tive

Warm air can contain more moisture than cold air. When air cools down, relative humidity (RH) will increase and when this reaches 100% water condensates (dew point). This happens when warm outside air reaches the cold egg shell: water in the air immediately condenses on the surface. RH in the storage room is not crucial for the problem of condensation, it is mainly the conditions of the outside air in combination with egg shell temperature that causes condensation. There are, in fact, two major stress moments when it comes to condensation at the time of transport: 1. From the cool storage at the poultry farm to the transport truck. 2. From the transport truck to the storage room at the hatchery.

lay

Rela

Mollier diagram

A protective measure against condensation is a transport cover to create a microclimate. This prevents warm moisture containing air from reaching the eggs directly.

Temperature (°C)

It takes a few hours for eggs to cool down or heat up. Still, temperature fluctuation during transport might cause problems if transport lasts a long time or takes place in extreme weather conditions. Physiologically, the hatching process starts at 25°C. However, in practice 20°C is considered too high an egg temperature because, at this point, development has already started slowly. 12°C is normally maintained as storage temperature, sometimes 4 to 5°C. Below this point there is a risk of freezing, leading to embryonic mortality. A rise in temperature can cause the onset of embryo development and, if this is not part of the hatching process, it is unwanted and may cause embryonic mortality. In an open truck, the outside airflow can have quite an impact, especially in extreme climates. In closed trucks (even without climate control) this is less of a problem; temperature will remain relatively constant. Condensation is a real danger for hatching eggs: • Water is an ideal environment for bacterial and fungal growth on the shell surface. • Water drops may contain contaminants that could enter the egg shell.

163


CHAPTER 10:

Health and diseases

For optimal production, you need healthy birds. Besides this, the broiler breeder delivers the raw materials for the next step in the production chain. So, health is not only an important issue for the results of the broiler breeder farm, but also for the results of their offspring: the broiler. The sooner you recognise the symptoms of disease, the better.

Some diseases can be transmitted from mother to chick. That is why the health of broiler breeders is extra important. On the other hand, immunity can also be transferred. So, some vaccinations are actually intended to protect the broiler and make use of this transference effect (maternal immunity).

164

Health management is an important part of broiler breeder management. This is more than just treating unhealthy birds, preventing diseases should also be a priority Preventing an outbreak of disease includes: 1. Optimal biosecurity. 2. Optimal protection by the immune system (vaccination). 3. Early diagnosis. 4. Adequate treatment.

B re e d e r S i gnal s


A healthy chicken Of course you need to be able to distinguish a healthy bird from a sick one. You have to be able to find the bird that sticks out.

Healthy breeders

nice and cheerful sound

red and clear wattles

clear eyes

behaviour: alert, comes towards you no injuries to head, neck, back, and tail

clean nostrils

straight neck

closed beak firm crop

proudly upright posture

straight back full tail

wings well positioned along the body

clean, moist, and nicely pink cloaca

clean, smooth, and even plumage pink and moist mucous membranes

straight, yellow legs, not overly warm or cold

smooth and flexible joints

firm, dry droppings

straight toes short nails

smooth footpads

Unhealthy breeders wattles and comb: pale, rough, and shriveled

screaming, squeaking, congested sound

eyes: mucous, semi-closed, frothy, swollen, white, dry, dull/pale in colour

tongue and mucous membranes pale and dry

pale or dark-red head, often hidden under the wing dirty feathers

wings drooping along the body or standing upward

scabs on the neck

bald wings

dirty, moist nostrils

pecked tail feathers

breast blister pendulous crop

lame, deformed legs (O/X-shaped)

bumble foot

curved neck or extremely stretched out convex back bald back

gasping

scratched hips

behaviour: sits/stands still in a corner, lethargic, and slow

drooping and hunched up posture

dirty, bulging, dry, and pale cloaca scratsches and/or wounds

thick joints

bended toe bumble foot legs too hot or too cold 10. He a l t h a n d d i s e a s es

short legs

long nails, crooked/curled toes

bumble foot

abnormal droppings: discoloured (bloody, black, sulphur), foamy and/or liquid 165


Vaccination Because the maternal immunity (antibody level) decreases in the first weeks of life, chicks need to be vaccinated repeatedly to build up immunity. Not only to protect the broiler breeders themselves but also to give them a high level of antibodies in order to prevent infections that can be vertically transmitted to the progeny. Examples of vertically transmitted viruses are: REO, CAV, Adenovirus and AE (Epidemic Tremor). Only healthy flocks should be vaccinated. There is only one exception: an emergency vaccination can be necessary to stop further outbreaks; reports of good experiences have been published with outbreaks of ILT and Fowl pox. But always keep in mind: disease prevention by vaccination alone is not enough! Three goals of vaccination

At the hatchery, but mainly during rearing, choices have to be made about vaccinations. Factors that determine the vaccination programme (number of vaccinations, kind of vaccine, administration method): • Legislation. • Epidemiological situation: field (infection) pressure in the neighbourhood of the rearing farm but also of the breeder farm. • Cost/benefit analysis. • Availability of vaccines. • Required level of antibodies (sometimes by legislation, e.g. ND). • Vaccination for other diseases. • Immune status of the birds (measured by monitoring). • Biosecurity and history of the farm (e.g. Salmonella). • Type of bird: broiler breeders (Reo!) versus layer breeders (EDS in brown layers!).

1. To protect the birds against specific infectious diseases.

2. To induce immunity (high levels of protective antibodies) to protect against vertical transmission of diseases.

3. To produce day-old-chicks with high levels of maternal antibodies (maternal immunity).

166

Make sure you store live vaccines according to the guidelines provided: in a refrigerator (top), preferably with a temperature alarm (bottom).

B re e d e r S i gnal s


Efficacy of vaccination Vaccination efficacy depends on, for example: • Age of the birds. • Type of vaccine: live or inactivated (killed). • Way of administration. • Number of vaccinations. • Percentage of birds that really get in contact with the vaccine in an adequate dose per bird. Live (attenuated) vaccines have an earlier response than killed (inactivated) vaccines that deliver a slower, but stronger and longer lasting immune response. Gumboro vaccination of breeders The first vaccination against Gumboro in grandparent or commercial broiler breeder flocks may be done at the hatchery or in the field. Hatchery vaccination ensures a uniform and consistent immunisation using vector or immune-complex vaccines. Field vaccination with live conventional vaccines may be done once or twice via drinking water. Measuring maternal antibody levels at day of hatch will help to calculate the appropriate water vaccination age. Later on, close to the end of the rearing period, a booster vaccination with an injectable inactivated vaccine is done to generate high levels of antibodies to be transferred to the progeny to protect it during the first weeks of the broilers’ life.

Especially for respiratory diseases, vaccination is more effective if the ‘target tissue’ is hit. E.g. for ND-vaccination an aerosol in very small droplets that go deep into the respiratory tract (lungs and airsacs) will give a better immune response than a coarse spray or a drinking water administration. But to prevent for a severe vaccination reaction (an adverse reaction) the first vaccination should not be done by aerosol with certain ND-vaccines! Vector ND vaccines have shown good efficacy as a starter vaccination at the hatchery.

For some diseases, special formulations have been developed to give a boost injection vaccination after prior live vaccinations: e.g. combination of IB, ND, TRT, Gumboro. For others these oil-emulsions (killed vaccines) are single vaccinations: a good example is the killed vaccine with reovirus in combination with Gumboro.

In recent years new vaccines have been developed to vaccinate in advance at the hatchery in ovo. This technique can now be used for various vector vaccines, and several other vaccines are being developed. 10. He a l t h a n d d i s e a s es

The storage of HVT and Rispens vaccines against Marek should be in containers with liquid nitrogen (-196°C).

167


Vaccination at the hatchery

Also for vaccinations in a carrousel at the hatchery - often in combination with beak treatment - a dye can be used in the Marek suspension, to prove that the injection is carried out subcutaneously.

A properly applied vaccination: the coloured suspension can be seen in the neck under the skin.

In the hatchery, coccidiosis vaccination is applied by gel spray (top) or water spray (bottom). After vaccination, it is recommended to keep the chicks in a bright area for at least 10 minutes - preferably longer to stimulate the vaccine (droplets) ingestion.

168

Effective and efficient immunization of flocks starts at the hatchery, where uniform, consistent and massive administration of vaccines (In-Ovo or at hatch) ensure protected new flocks. Vaccination of breeders could be centralized at the hatchery eliminating field vaccinations. Every chick must be injected with one dose of vaccine in a proper way: subcutaneously or intramuscularly. Spray vaccinations with IB and ND vaccines are common in hatcheries as well. Eyedrop vaccinations in which one dose per bird is administered are more precise but also expensive and time consuming. But in situations where there are outbreaks of these diseases, this method (possibly in combination with an injection with a killed vaccine) ensures that the chicks get early and long-lasting protection. Types of vaccines Immune-complex vaccines include a live vaccine in a temporary combination with specific antibodies. After injection, the complex is naturally and progressively degraded, as the maternal immunity goes down. Therefore, the live vaccine is freely released and can immunise the bird at the right time. Vector vaccines are using a carrier (=vector) virus, usually a Marek’s HVT strain, or a fowlpox virus. By genetic engineering genes from another disease agent (Marek’s, IBD, ND, ILT) are inserted at a specific location in the DNA of the carrier. After injection, the vector virus replicates and bears the foreign proteins on its surface, immunizing the bird against them. In breeders, HVT is particularly interesting due to its lifelong persistence in the bird. HVT vector vaccine cannot be administered in combination with other HVT vaccines, since this will reduce the development of immunity against both diseases. Custom (autogenous) vaccines are needed in case no commercial vaccine is available to address a field issue. In such a case, relevant organs, or bacterial colonies need to be brought to a laboratory for identification, propagation, and incorporation into a killed preparation. Monitoring vaccination paired with surveillance programs will ensure the efficiency of the immunizations and the early detection of emergent or sub-clinical pathogens that impair optimal flock performance and production parameters. B re e d e r S i gnal s


Vaccination during rearing Vaccinations during the rearing period should be planned very accurately. Vaccinations against respiratory diseases should have at least 14 days between them, but this cannot always be done (e.g. because of legislation).

Most important diseases for vaccination Disease

Specific vaccination information

IB

Because early IB-infections can harm the reproductive tract and cause ‘false layers’ a good programme should be planned with the several, available serotypes. Preferably live IB-vaccines should be administered by eye-drop or (coarse) spray. Aerosol and drinking water administration are also possibilities. To give the IB protection a real ‘boost’ an injection with a killed vaccine after several live vaccines is advisable. Possibly combined with spraying every 4-5 weeks during production.

ND

ND vector or live vaccination can be administered at the hatchery. At least it has to be carried out early in life. To prevent vaccination reactions that are too severe, the first live ND vaccination can be administered by spray or drinking water with a mild vaccine. The next ND vaccinations should be given by fine spray or aerosol followed by injection with a killed vaccine to get high protective titres against ND.

Fowl pox

Vaccination against Fowl pox should preferably be given in the wing-web and vaccine take should be checked 7-10 days after application: a skin lesion (pock) proves that the vaccination has been carried out properly.

ILT

Vaccination against ILT during rearing should preferably be carried out by eye-drop. Spray and drinking water vaccinations can have serious vaccination reactions as consequence. Another option is to use a vector HVT-ILT or FPV-ILT vaccine. Or to do both vaccinations: at day one with a vector vaccine and during rearing with an eye-drop. In case of high infection pressure in a region, two times eye-drop is advised.

CAV and AE

Vaccination against CAV and Epidemic Tremor (Avian Encephalomyelitis) should be never forgotten and furthermore the level of antibodies should be tested at the end of rearing to show that the birds are well protected and no claim can be made against the rearing company or farmer (even the breeder farmer).

Vaccination of a flock requires good organisation. Here, the person sitting grabs the bird and hands it over to a person who administers a wing web vaccination (Fowl pox), the second person (on the left) applies an oilemulsion IM-injection.

An example of a vaccination schedule for broiler breeders Age

Direct young birds along the long side of the house (or compartment) to be efficient with a coarse spray vaccination.

Disease

Type

Day 0 Injection (hatchery). Injection Injection Spray Spray-Gel Spray

Route

Mareks Rispens Mareks HVT+ND Gumboro IB (Mass)+ IB (793B) Coccidiosis ND Apathogenic-enterotropic

Live Vector Immune-complex Live Live Live

Day 1

Drinking water

SE

Live

Week 6

Drinking water

SE

Live

Week 8

Wing web

Vector

Wing web

FP & LT & AE (Vector LT-FP vaccine Cutter, Calnek 1143) CIAV (Del-Ros)

Week 9

Spray

IB (793B)

Live

Week 10

Spray

TRT

Live

Week 16

Injection Injection Injection

TRT+IB+ND+Gumboro Reo Salmonella

Killed Killed Killed

Week 18

Spray

IB (Mass) or IB (793B)

Live

Live

An automatic injector ensures that the injection is placed at the correct depth and correct place in the breast muscle. 10. He a l t h a n d d i s e a s es

169


Other vaccination methods during rearing Coarse spray vaccination

Fine spray vaccination (aerosol)

A coarse spray is often applied in the boxes: chicks are easy to control and have time to inhale/ingest the droplets.

Fine spray vaccination creates a mist of fine droplets that are inhaled by the birds.

Drinking water vaccination

Wing-web vaccination

Use a dye for a drinking water vaccination to check whether the vaccine solution reaches all parts of the poultry house.

A wing-web vaccination often uses multiple needles to give the vaccine more contact points into the skin.

Eye-nose drop vaccination

Manual eye-drop vaccination.

Automatic eye-drop vaccination.

Correct administration?

A blue coloured tongue is a signal that the eye-drop, nose-drop or drinking water vaccination has been properly executed. 170

Proof that the fowl pox vaccination was successful: you see a skin lesion in the wing-web. B re e d e r S i gnal s


Failures that have been made in the past…… to learn from Mistake

Consequence

Vaccination too early, e.g. Gumboro-vaccination at day 21 with intermediate live vaccine

No take up of the vaccine: no development of immunity, chicks are still susceptible

Vaccination with a ‘strong’ ND vaccine and/or aerosol at a young age of the chicks

Severe vaccination reaction with respiratory distress

Vaccination by drinking water: before vaccination, too much residual water present in the drinking lines

A lot of chicks will drink water without vaccine, so no development of immunity and a lot of birds are still susceptible for the virus

Vaccine is dissolved in drinking water with disinfectant

Vaccine virus will be harmed: vaccination will not be effective

Vaccine is dissolved in a solution with hot water

Vaccine virus will be harmed: vaccination will not be effective

Incorrect storage of vaccine: e.g. live vaccines that were not stored at refrigerator temperature (2-8°C), coccidiosis vaccine (live attenuated, with oocysts) is stored in the freezer (-20°C)

Reduction of live dose of virus; oocysts will be harmed or even killed: vaccination will not be effective

Anti-coccidiosis drugs in drinking water or feed (coccidiostats, ionophores)

Poor or no result of the coccidiosis vaccination

Ventilation is not turned off during spray or aerosol vaccination

Poor or no result of the vaccination

Antibiotic administration or coccidiostats before live bacterial vaccination (e.g. live Salmonella)

Poor or no result of the vaccination

Intramuscular injection

ᅚ Correct injections, you see two small injections points at the correct location.

X An intramuscular vaccination gone wrong. The muscle tissue is locally severely inflamed, e.g. because of needle contamination. 10. He a l t h a n d d i s e a s es

ᅚ Always use sharp needles. Rule of thumb: for each bottle of vaccine of 1,000 doses, you use a new needle!

X Local inflammation after oil-emulsion injection.

ᅚ Oil emulsion vaccine correctly injected between the superficial and deep breast muscle; the vaccine will stay on its place.

X If injected too superficially (blunt needle, touching the breast bone), the vaccine emulsion may leak back under the skin to causing a subcutaneous inflammation. 171


Disease symptoms The first diagnosis of diseases is often from signals in the poultry house. Do you notice differences? In behaviour, posture, signals from the environment, signals from data or visual inspection?

172

Behaviour

Posture

Birds that are not feeling well tend to hide.

Chickens that are not feeling well often sit in a hunchedup position. This can be a signal of coccidiosis.

Signals from the environment

Signals from data

If you see wet litter, this could be caused by leaking nipples or condensation, but it could also be caused by wet droppings: examine droppings in each inspection round.

With modern tools you can analyse the performance of birds almost in real time. Mortality, weight, water and feed intake are important parameters. Not only to monitor production results, but often they show the first signals of a disease outbreak.

Clinical inspection

Post mortem examination

If a bird stands out, because of its behaviour or posture, pick it up for further inspection.

Dissection provides more information about which organs are involved; specific alterations can give an indication of certain diseases.

B re e d e r S i gnal s


Laboratory diagnosis For many poultry diseases the only way to get a clear diagnosis is by laboratory testing. Since a lot of symptoms are very general and could be caused by a variety of diseases.

Blood samples are usually taken from the wing vein. Paired sampling (with an interval of 3-4 weeks) can show an increase of antibody titres.

Analysis of the chick paper or the box liners can provide you information about the Salmonella status of the delivered chicks.

For respiratory problems, a swab is taken from the trachea of the bird.

Droppings can be analysed for a variety of intestinal infectious diseases, e.g. Salmonella, Campylobacter, Histomonas, intestinal worms and coccidiosis. 10. He a l t h a n d d i s e a s es

173


Viral diseases

A false layer adopts a penguin stance. This abnormality, which we see in birds in production, is caused by an IB infection early in the rearing period (juvenile IB infection).

False layer, caused by IB. You can see some follicles in regression, blood veins around the follicles and very weak follicles (bottom).

Infectious Bronchitis (IBV) The IB virus is found worldwide, is highly contagious, and changes continuously, producing new variants all the time. In young birds IB results in respiratory problems, often followed by an E.coli infection. Some strains can also cause kidney disease and therefore wet litter. In adult birds, infection may result in reduced egg production, eggshell abnormalities, pale egg shells and a watery viscosity of the albumen. Because IB virus can also harm the oviduct of pullets, and immature birds, limited egg production over a prolonged period and also ‘false layers’ (birds that fail to come into production) can be seen. An effective IB vaccination programme should be based on epidemiological information from the area of rearing and production. Vertical transmission does not seem to be relevant for IBV. There are no specific treatment options for IB.

False layer after a juvenile infection of IB. The ovary is active (follicles present), but the oviduct is abnormal: filled with fluid.

IA, bird flu.

Avian Influenza (AI, bird flu or fowl pest) Typical for infection with a Highly Pathogenic Avian Influenza virus is the sudden increase in mortality. Symptoms are: swelling of the head, purple discolouration of the head, comb and wattles; subcutaneous haemorrhages; shortness of breath; diarrhoea; lameness; huddling and ruffled feathers. The AI virus can therefore cause all kinds of symptoms, making it difficult to identify immediately. AI, NCD, ILT, TRT and sometimes IB can all produce similar symptoms. AI is notifiable. In every outbreak of disease with sudden extremely high mortality, you should suspect AI. But there are also AI strains that cause only very mild symptoms in poultry, or none at all (Low Pathogenic AI = LPAI). The big risk of the H5- and H7-strains of LPAI is that they can mutate spontaneously to HPAI-strains.

Newcastle Disease (ND, pseudo-fowl pest) ND is not called pseudo-fowl pest for nothing. The symptoms of ND and AI are alike as two peas in a pod. ND is also notifiable and requires the same measures to be taken as for an AI outbreak. The ND virus is a Paramyxovirus, while the AI virus is an Orthomyxovirus. In various countries there is a legal requirement for commercial poultry to be vaccinated against this disease. In the event of a ND outbreak, a rapid ring vaccination in the area around the contaminated farm will limit the risk of it spreading further.

174

Proventricular bleeding.

B re e d e r S i gnal s


Infectious Laryngotracheitis (ILT) ILT is a viral disease which causes severe breathing problems, loss of production and death. A proper vaccination with a live vaccine by eye-drop during rearing will prevent serious outbreaks. Furthermore, a first vaccination can be given at the hatchery via a vector Marek’s vaccine with ILT in it. Also a vector vaccine for wing web application is available (FP-LT). In the event of an ILT outbreak, an emergency vaccination can limit the damage considerably. ILT symptoms can be caused by a live conventional vaccine virus spreading from another flock.

A serious ILT infection causes inflammation of the windpipe and throat. It could lead to mucous plugs and blood clots. The bird has difficulty taking in enough air and can even suffocate.

Gumboro disease (Infectious Bursal Disease, IBD) Gumboro is a serious viral disease that affects young chickens and can be accompanied by sudden death, typical watery, yellowy-white urate diarrhoea and reduced immunity. Rearing layer type-pullets seem more susceptible than broiler-type chicks, with mortality rates sometimes exceeding 50%. Autopsy reveals typical abnormalities: the bursa is swollen and surrounded by a glassy skin (oedema), often with haemorrhaging. Muscle haemorrhaging and swollen kidneys complete the picture. There is no treatment. Vaccinating young chicks can effectively prevent the disease, so it is very important to determine the right time to vaccinate. To do this, a good, fast lab test of the chicks’ existing immunity levels is needed. The importance of this is often underestimated. Some Gumboro vaccines can be injected in the hatchery (immune-complex, vector).

Chicken anaemia (CAV, Blue wing disease) Birds of all ages can be infected with the Chicken Infectious Anaemia Virus. Clinical symptoms (anorexia, mortality, focal skin lesions especially of the wings, co-infection with staphylococci leading to gangrenous dermatitis) are only seen in birds at an age of 3 to 4 weeks. Morbidity varies from 20-60%. Mortality is normally 5-10% (but: 60% has been experienced!). The virulence of the virus, the route of infection, the age of the birds and possible secondary bacterial and viral infections can influence morbidity, mortality and recovery. The majority of broiler breeder birds are infected during rearing by a subclinical field infection, resulting in sterile immunity. It’s better to perform a standard vaccination by drinking water or injection during rearing. CAV-outbreaks in broilers at a young age are the result of a CAV infection during the production period of broiler breeder flocks that did not have protection. At the end of the rearing period, before transport to the production farm the CAV-status should always be checked by serology testing.

10. He a l t h a n d d i s e a s es

Inflammation of the Bursa of Fabricius (= bursitis).

Haemorrhages on the wing of a young bird with Chicken Infectious Anaemia, hence the name Blue Wing Disease.

175


Fowl pox in the cutaneous form: lesions on the eyelids.

Tenosynovitis due to a reovirus infection.

Fowl pox/Avian Diphtheria Fowl pox is a common viral disease, it causes economic losses due to drops in egg production, slow growth and mortality. Birds can already be infected at a young age; but also if there is a lack of immunity in older birds. The disease can be seen in two forms: a cutaneous (skin) form or a diphtheritic form, or in combination. The skin form is expressed by lesions on the comb, wattle, eyelids and non-feathered areas of the body. In the diphtheritic form typical lesions are seen in the mouth, oesophagus or trachea causing respiratory signs. Birds will eat and drink less. There is no therapy. Sometimes when a rearing flock is not yet vaccinated an urgent vaccination is necessary if there has been an outbreak in the flock or in the neighbourhood.

Reovirus Infections Avian reovirus can cause viral arthritis/tenosynovitis. Reovirus is a common inhabitant of the intestines of birds and not all strains are pathogenic. The virus may be transmitted by droppings from bird to bird. Vertical (egg) transmission is also a factor when breeder flocks become infected during egg production. The first signs of viral arthritis/tenosynovitis are usually observed in broiler breeder chickens between 6 and 10 weeks of age. The birds are reluctant to walk. A distinct swelling of the tendons of the shanks and also above the hock joint can be observed. Vaccination of broiler breeders during rearing with live and inactivated vaccines protects against vertical transmission and ensures maternal immunity in the offspring. It also appears to be of benefit to the birds themselves.

Epidemic tremor (Avian Encephalomyelitis) Avian Encephalomyelitis is a viral disease that causes lameness in young chicks, a significant drop in egg production of between 10 and 15% and an approximately 5% drop in breeding results in parent birds. The virus is transmitted to progeny through the egg. In pullets, around 15% (or anything up to 60%) display lameness (nervous symptoms, lying on the side) and tremors. The mortality rate among affected birds is 50%. The tremors are usually only seen or felt in a small number of birds by picking them up. Vaccinating parent flocks gives almost 100% protection to their progeny.

Typical lateral position caused by avian encephalomyelitis.

176

B re e d e r S i gnal s


Marek’s disease Marek’s disease is a Herpes virus infection that can cause tumours. It resides in the feather follicle cells and is therefore also found in dust particles from skin and feathers. Feather dust – and therefore often Marek’s virus as well – can be found everywhere where chickens are or have been. It is therefore important to vaccinate chicks at the hatchery in-ovo or immediately after hatching. Traditionally by injection of different strains, like Rispens or HVT or a combtionatie of these two strains. Immunity against Marek’s disease needs at least 7-10 days after vaccination to build up. So, if there is any disease for which biosecurity measures are even more important than vaccination, it is Marek’s disease! House the new flock in a very clean environment. You should also keep different aged chicks separate. If inadequately protected chicks are infected in the first six to eight weeks of life, disease symptoms will emerge from about 15 weeks. Sometimes serious cases commence well after the onset of egg production, especially in broiler breeders or subsequent to moulting. The disease has several forms: • Neurological • Visceral • Ocular Also skin lesions are a possible form of Marek’s disease: tumours of feather follicles.

Neurological: often asymmetrical lameness in the leg, for example. Marek nervous form can be found from 6 weeks onwards.

Ocular: grey, discoloured, irregular iris (causing blindness)

Visceral: tumours in internal organs (mainly the liver, spleen, ovaries and sometimes other organs). This form is the most common and may result in extremely high mortality.

Leukosis (ALV) Avian Leukosis Virus (ALV) can cause severe tumours in birds of various ages of all kind of organs: liver, spleen, kidney, heart, lung, ovaria and testicles, bursa of Fabricius, bones, eyes, skin. Birds can get infected vertically from hen to progeny and horizontally, by direct or indirect contact. Diagnosis by specialised laboratories is necessary to distinguish from other neoplastic diseases (Marek’s disease, REV). Primary breeding companies of layer-type and meat-type have made significant progress in reducing or eradicating ALV of several subgroups from their breeding lines. Tumours in the spleen.

Enlarged liver due to either Marek’s disease or leukosis.

10. He a l t h a n d d i s e a s es

177


Bacterial diseases

Abnormal ovary with follicle stalk formation, commonly seen with a S. gallinarum infection.

Dark, inflamed pericardium and swollen liver caused by S. enteritidis infection.

Salmonellosis There are a great number of Salmonella serotypes, but only some can cause illness in poultry: S. pullorum causing Pullorum Disease (PD), an acute disease of chicks and pullets. With mortality rates of 0-100%! Typical symptoms are diarrhoea and greatly increased mortality, particularly in the first and second week of life. S. gallinarum causing Fowl typhoid, mostly affects mature birds. S. gallinarum results in widespread mortality, including in older birds. Autopsy reveals inflammation of internal organs including the ovary and peritoneum. Antibacterial treatments and vaccinations are ultimately ineffective. There is no simple way of eradicating Salmonella, so it is necessary to develop a specific farm-based approach for each case. Losses from peritoneal inflammation caused by S. enteritidis are sometimes observed in adult layers. In humans, some serotypes that come from poultry, including S. enteritidis and S. typhimurium, cause food poisoning with severe diarrhoea. For that reason according to European guidelines breeder flocks that are infected with these types of Salmonella (S. enteritidis, S. typhimurium, S. hadar, S. infantis and S. virchow) will be culled and slaughtered in a logistic way. S. pullorum and S. gallinarum are strictly poultry pathogens, so not dangerous for humans.

In many countries there are national programmes for Salmonella control. Part of this is regular monitoring of reproduction flocks. Samples are easily taken by walking overshoes (boot swabs) through the house. For broiler breeder flocks this monitoring is extra relevant since Salmonella can be vertically transmitted via hatching eggs and hatchery.

178

B re e d e r S i gnal s


Colibacillosis E. coli Peritonitis Syndrome (EPS) Besides peritonitis, E. coli-infections in adult birds can also cause pericarditis (inflammation of the heart sac), perihepatitis (inflammation of the liver capsule) and salpingitis (inflammation of the oviduct). E. coli-infections often occur secondarily when the birds’ immunity is compromised but also primarily by virulent E. colistrains, the so called Avian Pathogenic Escherichia Coli (APEC)-strains. Colibacillosis is the most common infectious bacterial disease and responsible for significant economic losses. In a flock of young chicks with colibacillosis, the birds will huddle together with raised feathers. Their breathing is laboured, they snort and cough and often produce thin droppings. There may be lame birds, and some birds may stop producing. Losses are between 0.2 and 1% per day. Autopsy reveals inflamed air sacs, liver capsule and heart sac. Risk factors for colibacillosis are viral infections of the respiratory tract, poor house climate and inadequate hygiene. EPS is very common in adult hens: moderate to severely increased loss of birds in top condition is often the only symptom. Production is usually more or less unaffected. Sick birds are rare, and production is usually maintained. Treatment of E. coli is possible with antibiotics: sensitivity tests are needed. Live vaccine (O78) and killed vaccine (to provide natural passive immunity to progeny of vaccinated hens) are available. The use of autogenous vaccination can be helpful if specific pathogenic strains are involved.

Yolk sac infection Young chicks can die in the first days of life because of an inflammation of the navel (omphalitis). Because the navel is very close to the yolk sac the yolk sac is usually involved. An acute inflammation of the navel shows redness, swelling and oedema. E. coli infection is most common, but Enterococcus faecalis is also frequently isolated. Chicks that live longer than 4 days may also have peritonitis, inflammation of the heart sac and liver capsule. Survivors are usually stunted and have stunted growth. Possibly highly pathogenic E. coli strains are involved resulting in high mortality. Biosecurity (hatching egg hygiene, hatchery hygiene) is essential as a preventive measure. Bacteriological examination including sensitivity tests are needed to find out which antibiotic treatment should be chosen.

10. He a l t h a n d d i s e a s es

Normal abdominal cavity.

Peritonitis. Exudate of fibrin covering the intestinal tract.

Pictures after autopsy. On the left: a chick without a yolk sac infection. On the right: with a yolk sac infection. Note the size, dirty-yellow colour, veining, and the runny yolk content.

179


Mycoplasmosis (CRD: Chronic Respiratory Disease) Mycoplasma gallisepticum (Mg) infection can cause severe respiratory signs because of caseous airsacculitis, sinusitis (swollen heads), perihepatitis and pericarditis in breeders, resulting in mortality (especially when the disease occurs in combination with other disease agents like IB virus and E. coli). Feed consumption is reduced and egg production declines. Because Mg is vertically transmitted, the progeny will be infected too and have serious problems. However in some countries a ‘stamping out’ policy has been successful in producing only Mg free progeny. Vaccination is possible (live vaccines and inactivated vaccines), but this is not permitted in every country. Swollen head caused by mycoplasmosis

Fowl cholera (Pasteurellosis) Fowl cholera is a disease that mainly occurs in adult birds that are in production; they are more susceptible. Mortality usually ranges from 0-20%. How the bacterium has been introduced into a flock is often unclear. It has an acute and a chronic form and is caused by the bacterium Pasteurella multocida. The acute form is associated mainly with higher mortality and diarrhoea. The chronic form can result in inflammation of the comb and wattles. Often males are more affected than females. Options are preventive vaccination and antibiotic treatment.

Swollen comb and wattles caused by Pasteurella multocida.

Swollen sinuses due to coryza.

180

Coryza (Avibacterium paragallinarum) Coryza is caused by the bacterium Avibacterium paragallinarum (formerly known as Haemophilus paragallinarum), and mainly occurs in hot areas. It primarily affects older birds. It is especially seen in multiage farms that are never depopulated. Morbidity is high but mortality is low if uncomplicated, although it may be up to 20%. The bacteria survive 2-3 days outside the bird but are easily killed by heat, drying and disinfectants. This usually acute, sometimes chronic, highly infectious disease is characterised by inflammation of the upper respiratory tract, especially nasal and sinus mucosae. 1-3 days after the first contact there is a rapid onset of disease over a 2-3 day period with the whole flock affected within 10 days, resulting in increased culling. Carriers are important with transmission via exudates and by direct contact. It is not egg transmitted. Symptoms: facial swelling, purulent ocular and nasal discharge, swollen wattles, sneezing, dyspnoea, loss of condition, drop in egg production of 10-40%, loss of appetite. Prevention is obtained by stocking coryza-free birds and using an all-in/all-out production policy. Vaccines (so-called bacterins) can be used; at least two doses are required. Commercial bacterins may not fully protect against all field strains but reduce the severity of reactions. Live attenuated strains have been used but are riskier. Controlled exposure has also been practised. Vaccines are used in areas of high incidence. Birds recovered from the challenge of one serotype are resistant to others, while bacterins only protect against homologous strains.

B re e d e r S i gnal s


Clostridial diseases Necrotic enteritis, caused by Clostridium perfringens, is primarily a disease of young chicks but can also occur in adult birds. The disease is both an infection and intoxication in the affected birds. Characteristic is the sudden onset, high mortality and necrosis of the mucous membrane of the small intestine (‘pseudo membrane’). It can be the consequence of a concurrent coccidiosis infection (often E. necatrix or E. brunetti) but also be related to a sudden change of feed (change of batches) or by segregation of feed components. Treatment with antibiotics (e.g. penicillin and tylosin) are very effective. Also restoring of the microflora by a competitive exclusion product is beneficial. Necrotic enteritis with dead mucosa of the intestines (pseudomembrane). Femur head necrosis, synovitis and bumblefoot Lameness from Staphylococcus aureus infection is a worldwide problem and causes economic losses due to bird losses, lower production, and condemnations of carcasses at slaughter. Several locations in the bird’s body can be infected via skin wounds, inflamed mucous membranes and via the blood stream. In joints this results in arthritis (hock joint: synovitis), in bones in osteomyelitis and in the foot in ‘bumblefoot’. Infection can take place at a young age via the open navel of day-old-chicks, or via treatments (e.g. toe or beak treatment). Also during the rearing period, injection vaccination may possibly infect birds with S. aureus. If the immunity is also impaired, birds become more susceptible. Eliminate sharp objects such as metal edges and splinters (slats!). Particular attention is needed to good litter quality: this is beneficial for healthy footpads. S. aureus infections can be treated with antibiotics.

Broken thigh bone due to Staphylococcus aureus (femur head necrosis).

Bumble foot.

Amyloidosis (amyloid arthropathy) Incidentally flocks of breeders show enlarged joints with presence of orange-yellowish material inside often caused by bacteria, mostly Enterococcus faecalis. The route of infection is not clear. Unilateral deposition of amyloid has also been seen in rearing broiler breeders after intramuscular vaccination with Marek vaccine in the leg, possibly injecting a specific clone of E. faecalis. Good hygiene procedures at the hatchery have shown good effects. Furthermore it is still uncertain how to prevent this disease. Possibly treatment of underlying disease or eliminating potential stress factors can benefit. Male bird (age 13 weeks), suffering from synovitis of the left hock joint.

Typical picture of synovitis, swollen, warm hock and tightened, shiny skin.

Deposition of orange coloured substance in the joints. 10. He a l t h a n d d i s e a s es

181


Brachyspira infection Brachyspira bacteria cause avian intestinal spirochaetosis (AIS), a chronic intestinal inflammation resulting in reduced nutrient intake. This causes deficiency and lower resistance. The symptoms include frequent drops in production, diarrhoea, weight loss and higher bird losses.

Foamy caecal content.

Accumulation of live mites on a bolt. Mites tend to hide in small corners, avoiding light.

External parasites Red mite Red mites (Dermanyssus gallinae) can carry harmful bacteria or viruses. The bloodsucking parasite transfers them as it passes from one chicken to the next. With a severe red mite infection, chickens lose a lot of blood which can lead to anaemia, and in turn death. An average red mite infection reduces the chicken’s resistance, but there are few external symptoms other than the fact that their plumage is rougher because they pick at the itchy skin. Chickens control red mites naturally by taking regular dust baths. It is best to control red mites when the poultry house is empty with, for example, silica or thermokill (heating the house). Also fluralaner via drinking water when the birds are still in the poultry house is a therapy. Clean it well to remove the hiding places such as under piles of manure. If you use pesticides, make sure you follow the instructions properly. Heat treating the house can also greatly reduce an infection. Birds’ nests on the outside of the house are a potential source of infection: remove them. Even on farms with good biosecurity red mites can be present, also on rearing farms. Red mites can be tracked down by knocking on the system or by scraping in cracks with a knife while holding a white sheet of paper underneath. You can also hang up mite traps in which the mites will hide. Inspect places where red mites are likely to hide: under perches, under slats, in dry droppings and in laying nests.

Parasitoid wasps are used to combat red mites. Predatory mites are being used for this purpose as well.

darkling beetle

red mites Vectors for diseases, like darkling beetles and red mites can be found under the slats. 182


Internal parasites Worms Regular post mortems on representative birds per house can give a good impression of the worm status. Another method for an adult nematode check is to have a regular worm egg count from mixed samples of intestinal droppings and caecal droppings. Nematodes Because farms for broiler breeder replacements are usually cleaned out after 18-20 weeks, worms are rarely found on those farms; but it is commonly thought that broiler breeder farms are all contaminated with the worms with a ‘direct-life cycle’: e.g. Ascaridia galli, Heterakis gallinarum and sometimes also Capillaria spp. Capillaria obsignata, is the most pathogenic nematode. Ascaridia are the largest nematodes, sometimes reaching a length of 116 mm. The adults live in the lumen of the small intestine but the larval stages invade the mucosa. Ascaridia galli may cause ill-thrift, enteritis or intestinal impaction. The life cycle is direct, which means that infections can re-occur on the same litter. Heterakis gallinarum (which serves as a transport host for Histomonas meleagridis, the causative agent of blackhead disease) is a small, generally white worm and primary found in the caeca. The life cycle is direct, although worm eggs may be ingested by earthworms, where they hatch and live for months before being ingested by a bird. Capillaria can be found in the small intestine mucosa where it induces a catarrhal exudate and thickening of the wall. Morbidity and mortality are possible in heavy infections.

Caeca with small worms (Heterakis spp.) that you can actually see through the intestinal wall.

Close up of Heterakis gallinarum on a fingertip.

Regular deworming programmes are recommended. Benzimidazoles fenbendazole, flubendazole, albendazole, cambendazole, levamisole (L-tramisole), are highly effective. Some are available in a water-soluble formulation. Tapeworm infections (cestodes) These worms are flattened, ribbon-shaped, usually segmented. Most common is Raillietina cesticillus, a large robust tapeworm, up to 15 cm long, which needs beetles as intermediate hosts. A well-known beetle is the darkling beetle (lesser mealworm, litter beetle, Alphitobius diaperinus). The pathogenicity is described as mild or harmless. In some countries, products with flubendazole (by feed) are registered for treatment of cestode infections. Cestodes control measures are best directed against the intermediate hosts.

Roundworm infection in the small intestines (jejunum) with Ascaridia galli.

Tapeworm infection in the small intestines (jejunum) with Raillietina cesticillus. 10. He a l t h a n d d i s e a s es

183


Eimeria in chicken There are five species of Eimeria with relevance to chickens. Each species has its own favourite spot in the gut.

1.

E. tenella resides in the caecum and can cause an accumulation of blood there.

2.

E. brunetti also causes severe enteritis but in the last part of the intestine.

3.

4.

5.

Pale bird suffering from caecal coccidiosis.

184

E. necatrix resides in the middle of the small intestine and causes severe enteritis.

E. maxima causes petechiae (purple spots) in the middle third of the intestine.

E. acervulina causes white bands at the beginning of the small intestine.

Typical ‘salt-and-pepper’ appearance of the intestines, caused by E. necatrix.

Coccidiosis Coccidiosis is one of the most harmful diseases in poultry farming and is caused by several types of Eimeria. This single-cell gut parasite is common in poultry and causes very minor to severe harm to the gut. Moderate infections can result in subclinical disease, while mass infection can lead to clinical symptoms such as diarrhoea and sometimes death. Coccidia spread as oocysts which are extremely resistant to common disinfectants. That is why almost every farm in the world is infected with coccidiosis. The severity of the symptoms depends on the age of occurrence and the species of Eimeria: from slightly retarded growth with E. acervulina infection to sudden death with E. necatrix, E. brunetti or E. tenella infection. The faecal droppings are often abnormal; in case of caecal coccidiosis (E. tenella) there may be fresh blood in the droppings. Coccidiosis can also lead to bacterial enteritis (Clostridium). Normally the disease occurs in young birds (during rearing), although outbreaks are also possible in young breeder flocks during the onset of production due to poor immunity. Prevention Good cleaning of the empty house between rearing periods with a large volume of water (flushing out oocysts mechanically) is very important for reducing the number of oocysts inside the house. Specific products have been used to target the oocyst for destruction. In some countries there is a product available containing an ammonium salt and sodium hydroxide (oocide). Also burning of the floor is a method to destroy superficially present oocysts. Vaccination with live vaccines is common in breeders: attenuated (low-virulence) or non-attenuated (wild type) strains. Most vaccines contain live coccidiostat-susceptible strains: so be certain that the feed does not contain coccidiostats and don’t use early after vaccination sulpha-therapies. Even after a proper vaccination E. necatrix outbreaks are seen because of the poor immunity typical of this Eimeria species. Treatment is possible with drugs by drinking water administration or (if the birds are too sick to drink) by injection with a sulphadimidine-sodium solution.

Typical picture of bloody content inside the intestines due to E. necatrix coccidiosis (haemorrahgic enteritis).

B re e d e r S i gnal s


Blackhead (histomonosis) Histomonosis is an emerging disease. It is not uncommon for blackhead to cause 10% mortality, increased culling and non-uniformity in breeder flocks. Decreased production from morbidity, chemotherapy expense and problems in the progeny of infected broiler breeder flocks also contribute to economic losses from histomonosis. Outbreaks may be seen at 8-10 weeks, but producers have reported problem farms where outbreaks occur earlier, even at 4 weeks of age! The disease has no public health significance because it only affects birds. The protozoan Histomonas meleagridis is a single cell parasite that invades the caecal mucosa and then spreads via the blood to the liver. In those organs gross lesions are seen: after tissue invasion with histomonads the caecal wall becomes thickened and hyperaemic. Serous and haemorrhagic

Severe, chronic inflammation of the caeca (typhlitis), with typical cheesy plugs: caecal cores.

exudate from the mucosa fills the lumen of the caeca and distends the walls with a caseous or cheesy core, and ulceration of the caecal wall may lead to perforation of the organ and cause generalised peritonitis. Typical, numerous lesions in liver tissue are not always seen, but more often in young birds than in adult birds: circular depressed areas of necrosis circumscribed by a raised ring. Histomonas life cycle The most important route of infection is by ingestion of ‘infected eggs’ of the nematode worm Heterakis gallinarum. Also earthworms can serve as transport hosts in which Heterakis eggs hatch and survive. Histomonads cannot survive long outside the host unless protected by the heterakid egg or earthworm. So the worm egg is a way for longer persistency in the environment and for a ‘safe passage’ through the acidity of the crop, proventriculus and gizzard. Because worm eggs are resistant to environmental conditions and may remain infective for 2-3 years, Histomonosis can suddenly reappear on farms! Houses may become badly contaminated by Heterakis worm eggs, causing outbreaks in flock after flock. Treatment In many countries there are no chemotherapeutic products available for treatment (because of the ban of nitroimidazole antihistomonals). It has become common practice to treat outbreaks with antibiotics to combat secondary infections. It is therefore important to target the intermediate hosts by early and frequent deworming with a benzimidazole type dewormer, e.g. fenbendazole, capable of killing the larvae. It is important to administer dewormers at least 1 week prior to the usual expected time of outbreaks, based on the history for each farm.

Life cycle of Histomonas meleagridis

Carrier bird: Caecal worm larvae develop into mature worms. H. meleagridis infects the ovary of these worms.

Caecal worms (Heterakis gallinarum) produce eggs containing H. meleagridis.

Direct and indirect parasite cycle in carrier bird

Caecal worm eggs develop into larvae in the soil/litter where they are deposited. Earthworms ingest caecal worm larvae containing histomonads and serve as a host.

Infection by the histomonads often results in death.

Indirect infection: Earthworms are ingested by the chicken.

Direct infection: Caecal worm larvae are ingested by the chicken or Histomonas parasites enter by cloacal suction.

185


Non-infectious diseases Ruptured tendon (RT) Several predisposing factors may contribute to RT, and it is when these factors are sufficient in number and/or severity that one or both gastrocnemius tendons rupture. Although RT most commonly occurs during early to midlay, tendon damage (i.e. loss of tensile strength) will most likely have occurred earlier in the bird’s life, i.e. during rear. Reovirus and Staphylococcus bacterial infections are possible contributors to RT: some strains of Staph bacteria produce proteinase enzymes which weaken the surrounding tissue potentially resulting in subsequent tendon ruptures. There is clear evidence that nutrient delivery to the tissue is critically important and that a fast body weight gain is a risk. Diseases that impact intestinal health (e.g. coccidiosis, viral enteritis, dysbacteriosis) may adversely affect nutrient absorption and therefore, delivery of nutrients to tendon tissue.

Top: Ruptured tendon with a haemorrhage just above the hock joint. Bottom: Dissection of a complete rupture of the tendon. Acute trauma with haemorrhage due to the rupture of blood vessels. Cloacitis Sometimes an alteration of the deep layers of the cloaca is responsible for a malfunction of the cloaca with typical white excretion of the vent (pasty vent) and more bloody excretion on the eggshell. The real cause is currently unclear. Possibly an early onset of lay and an immaturity of the hens’ reproduction apparatus are factors to consider. As a consequence cannibalism may take place.

Very dirty back end of a chicken due to cloacitis.

Fatty Liver-Haemorrhagic Syndrome (FLHS) Typical is the sudden death of heavy birds with pale heads, often with a sudden drop in egg production. Dead birds have large blood clots in the abdomen originating from the liver and often partially enveloping the liver. The liver of other birds is generally enlarged, yellow and friable, sometimes with smaller haemorrhages. Also the amount of fat in the abdomen is excessive. FLHS is associated with high-energy diets together with restricted exercise, and is most common during hot weather. Suppletions in drinking water or feed with anti-fatty-liver-syndrome mixes (containing choline, Selenium and Vitamin E) during several weeks have shown benefits. Enlarged liver due to FLHS.

186

B re e d e r S i gnal s


Index abnormal behaviour 12, 52, 172 activity 12 aggressive behaviour 16, 128 all-in all-out 20 amyloidosis (amyloid arthropathy) 181 artificial insemination (AI) 129 automatic weighing 108 avian influenza (AI, bird flu or fowl pest) 174 bacterial diseases 178 beak treatment 30, 31 bell drinkers 36 biosecurity 20, 164 blackhead (histomonosis) 182 body development 48, 57, 88 body temperature 39, 114 body weight 12, 58, 130 boiler breeder 8 brachyspira infection 182 break-out 159 breast meat 57, 63, 103, 137 breeder dilemma 11 breeding pyramid 9 broiler characteristics 10 calcium 13, 106, 110 candling 159 chain feeder 33 chick distribution 44 chicken anaemia (CAV, blue wing disease) 175 cleaning 24-26 climatic conditions 43, 163 clinical inspection 172 cloacitis 186 clostridial diseases 181 clothing 22 coarse spray vaccination 167, 170 coccidiosis 184 colibacillosis 179 colour sexing 29 competition 119 condition 64, 65, 103, 137 controlled feeding 52-54 cool down 150, 154 cooling 116 coryza (avibacteriom paragallinarum) 180 cracks 147 crop filling 49 daily routine 14 darkling beetle 23 daylight houses 68 day-old-chicks 41 development 81, 82, 95 disease symptoms 172 diseases 164 disinfectants 27 disinfection 22, 24, 27 down time 24 drinking cups 36 drinking nipples 36 drinking systems 36, 79

drinking water 48, 79, 112 drinking water vaccination 170 dry cleaning 25 drying 26, 150 dust baths 14 dwarf breeds 10, 12 E. coli peritonitis syndrome (EPS) 179 eat-drink-ovoposition 94 eating behaviour 105 egg collection 151 egg grading 152 egg handling 144 egg laying behaviour 95 egg weight 109, 140, 145, 148 end of lay 143 energy requirement 136 epidemic tremor (avian encephalomyelitis) 176 equipment 22, 25 external parasites 182 eye-nose drop vaccination 170 fatty liver-haemorrhagic syndrome (FLHS) 186 feather eating 60 feather sucking/stripping 17, 80 feather pecking 80 feather sexing 29 feathering 55, 60, 141 feed 48, 73 feed intake time 135 feed restriction 12, 52 feed stress 54 feeding errors 110 feeding management 55, 106, 135 feeding pans 34 feeding programme 13, 52 feeding systems 33 feeding time 101 feedless day 53 femur head necrosis, synovitis and bumblefoot 181 fine spray vaccination (aerosol) 170 flank damage 84 flies 23 floor eggs 91, 96-99 foot bath 22 footwear 22 foraging behaviour 54 forced moulting 143 fowl cholera (pasteurellosis) 180 fowlpox/avian diphtheria 176 genetic 9-11 germinal disc 144 grading 58, 59, 118 growth 103 growth control 12 gumboro disease (infectious bursal disease IBD) 175 harem 128 hatching egg 146 health 164

heat stress 114, 115 height indicator 107 house temperature 39 humidity 45, 156 immature female 84 immature male 84 infectious bronchitis (IBV) 174 infectious laryngotracheitis (ILT) 175 intake time 109 intra muscular injection 171 intra-spiking 138 laboratory diagnosis 173 laying curve 117, 131 laying nest 93, 132 laying pattern 140 leg length 120 leukosis (ALV) 177 light intensity 47, 91 light programme 88 light stimulation 89 linoleic acid 106 litter quality 133 lysine 60, 103, 110 male feed 100 male grading 118 male hierarchy 119 male house 83 male management 85 male persistency 139 male-female interaction 124 malnutrition 109 manual egg collecting 151 manual weighing 108 marek’s disease 177 mating behaviour 15, 126, 127 mature female 82 mature male 86 mollier diagram 163 moment of mating 126 monitoring 107 moulting 142 music 17 mycoplasmosis (CRD: chronic respiratory disease) 180 nail 84 natural behaviour 14 natural light 90 negative pressure 19 nematodes 183 newcastle disease, ND (pseudo-fowl pest) 174 observations 7 on-farm transport 160 packing eggs 153 pecking 17 pelvic bones 87 perches 50 personal hygiene 22 pest control 23 phase feeding 13 pin bones 87 point setting 154

posture 118, 172 preening 14 preparation 38 production chain 5 production index 135 progress 9 protein 136 puberty 66 quality time 129 ranking 17 ratio male/females 84 red mite 182 reovirus infections 176 rodents 23 ruptured tendon (RT) 186 salmonellosis 178 satiated 13 scratching 14 selection 10, 11 separate feeding 74 sexing 29 sexing errors 61 sexual activity 122 shell quality 149 signals concept 6 slats 67, 68 slow(er) growing 11 social hierarchy 17 sounds 17 sperm quality 126 spiking 138 spinfeeders 35 stimulation 89 stocking density 72 storage 144, 155 tapeworm infections (cestodes) 183 toe treatment 32, 84 transfer 69 transport movement 162 transport of chicks 40 transport of hatching eggs 160 uniformity 12, 28, 58 unrestricted feeding 11 vaccination 166-170 vaccination methods 170 variation 58 vent sexing 29 ventilation 18 vermin 23 viral diseases 174 washing eggs 157, 158 water 48 water consumption 102 water restriction 56 weighing 107, 108 weight 53 welfare 11 wet cleaning 26 wing-web vaccination 170 worms 183 yolk sac infection 179


Breeder Signals is published with the support of the following partners: Silver partners

Bronze partners


Veranda Breeder

Royal Class environment for superior quality egg production • Group housing provides optimum control • Most economical way for hatching egg production • Increased bio-security

For more information visit:

www.vencomaticgroup.com


The start of a healthy chick

Angel Eggs B.V. Ploegstraat 64a 5712 RL Someren The Netherlands T + 31 (0)493 473195 E info@angeleggs.eu I www.angeleggs.eu

Premium+® laying nest The high nest acceptance, minimal amount of floor eggs and use of high quality materials make the Premium+® laying nest the best selling nest worldwide. Check www.jpe.org for more information.

Complete housing solutions for breeder production Follow us on:

www.jpe.org


Veterinary experts in broiler breeder business

Veterinary service and diagnostic facilities VCS Poultry Team Slievenstraat 16 5711 PK Someren

T +31 (0)493 - 44 10 55 pluimvee@vc-someren.nl www.vc-someren.nl


‘Broiler breeders require careful attention. Managing two sexes with completely different requirements is like managing two different species in one flock.’

BREEDER SIGNALS

A practical guide to optimal management of broiler breeders

Poultry meat is the most important animal protein source in the human diet. As a consequence, global production of broiler meat is rapidly growing and now more than 125 million metric tonnes. A relatively small number of broiler breeders has a major impact on the whole poultry meat chain. The continuing increase in the genetic potential of broilers makes the production of first-class chicks increasingly challenging. State-of-the-art management is crucial for a successful flock. Differences in results up to 10 day-old chicks per hen house are not rare, costing tens of thousands of euros. Breeder Signals contains practical information about broiler breeders to ensure maximum production of first grade hatching eggs. This book also offers practical tools and modern insights to optimise sexual behaviour, fertility, egg production, and hatchability, based on the look-think-act approach. Feathering provides you with signals about the quality of your flock. Too nice? Then they are hardly mating. Too little? These hens will not mate since it will be painful. The book follows the day-old-chick arriving at the rearing house through the laying period and up to egg transport to the hatchery. Breeder Signals is essential for anyone working in the poultry meat chain as breeder farm managers, farm workers, advisors, veterinarians, students, etc. Breeder Signals is part of the Poultry Signals series©. Poultry Signals presents practical knowledge of animal-oriented poultry farming in an easy, accessible format.

ISBN 978-90-8740-332-4

www.roodbont.com

9 789087 403324


Turn static files into dynamic content formats.

Create a flipbook