CREATING PEDESTRIAN SAFETY ISLANDS (AND EXTENDED CURBS) GOAL:
Create pedestrian refuges to provide a safer means of crossing high-traffic streets. These are seen on some two-lane roads, but usually on three or more lane roads where higher speeds discourage a pedestrian and bicyclist friendly environment.
WHAT IS IT?
Pedestrian safety islands reduce the amount of time a pedestrian or bicyclist will spend in an intersection. They can be used on wide or narrow roads but are implemented in areas where high traffic volume and speed make crossing difficult or unsafe. They should be at least 6 feet wide, but larger is better if the location allows for it. The cut-through or ramp of a pedestrian safety island should also be the same width of the crosswalk (or smaller if it cannot be the same). An extension past the crosswalk is also preferable since it acts as a “protective obstacle” for people on the island. Additional features can include curbs, bollards, reflectors, etc. Landscaping would require additional maintenance to ensure driver and pedestrian visibility.
Vision Zero Toolkit / 24
Where there are intersections which are unsafe or have underused spaces, a curb could be extended to fill the underused space creating opportunities for a plaza or other pedestrian oriented space. This extension often realigns roadways and intersections increasing safety for all roadway users. Crosswalks and other bicycle and pedestrian facilities should be reconstructed and striped. The construction of this extended curb can often shorten distance for pedestrian crossings, creates right angle intersections, reduces roadway pavement, and establishes a new space which nearby businesses or the city may utilize.
POTENTIAL CONFLICTS
Pedestrian safety islands are beneficial for pedestrians who need to cross roads that might not have a signalized crosswalk, is a wide intersection, or helps people who might not be able to cross a street within the time before the signal changes for drivers. With that being said, common issues with pedestrian safety islands are that they need to be visible during all points in the day and evening. This is both important for the safety of the pedestrian or bicyclist but also for the driver to avoid potential damage to their vehicle. They should also only be installed in intersections that see a high demand for pedestrian and bicyclist crossing. They also should not narrow lanes too much especially where cyclists might be present. It is important to account for potential problems that might occur like turning patterns. When designing pedestrian safety islands, it is important to account for people who might have disabilities or are mobility impaired. Certain design features will need to be included in order to accommodate for the blind or are in wheelchairs (as well as providing enough room to maneuver through the island).