__MAIN_TEXT__

Page 1

HANDLELESS

RAIL GU IDE

HANDLELESS RAIL GUIDE | PAGE 1


HANDLELESS RAIL GUIDE | PAGE 2

Key Icons

TO

Below are some handy keys to help you navigate around this document.

P

TIP

Our top tips

TE

Please note

Important bits of information to consider when planning or fitting your kitchen E AG

SE E

P

NO

Nifty top tips from our designers and fitters

Refer to page

Look out for the ‘see page’ icon to aid navigation through this document

CO

DE

S

Product codes

UCT OD

EA

TU RE P

R

For quick reference, each page will have a summary of the product codes listed.

Feature products

Stand out products that can create feature within a kitchen design.

F


HANDLELESS RAIL GUIDE | PAGE 3

CONTENTS This comprehensive handleless guide is split into two key sections: Recessed Rail System

Flush Rail System

PWS offer two distinct rail systems that allows you to create a true handleless kitchen. This document illustrates the difference between the two, where they can be used, and how to fit them.

Section 1

Section 2

Recessed Rail System

Flush Rail System

Introducing Recessed Rail System

Appliances & Internal Storage

Introducing Flush Rail System

06

Introducing Recessed Rail System

44

Planning with a Dishwasher Frame

64

Introducing Flush Rail System

08

Compatible Door Ranges

45

Gollinucci

66

Compatible Door Ranges

46

Undermount Ovens & Microwaves

47

Integrated Ovens

48

Washing Machine & Tumble Dryer

49

Fridges & Freezers

50

Kessebรถhmer

Recessed Rail Product Offering

16

Top Rail & Supporting Accessories

17

Mid Rail & Supporting Accessories

18

Vertical Rails & Supporting Accessories

19

Wall Profiles & Supporting Accessories Signature Designs

Porter Handleless Accessories

54

Porter Handleless Accessories

Gloss White & Burnt Ash

55

External Corner Post(s)

22

Hartforth Blue & Porcelain

56

Intrenal Corner Post(s)

23

Regiment & Dove Grey

57

L - Shaped Base Feature End Panel

58

C - Shape Base Feature End Panels

21

Specification & Installation Top Rails & Accessories

26

Top Rail Installation

28

Internal & External Corner Joint

29

End Cap Installation

29

Mid Joint Installation Mid Rails & Accessories

30 32 33

Mid Rail Installation Internal & External Corner Joint End Cap Installation Appliance & Larder Profiles

35

Appliance Filler Rail

36

Vertical Profiles

38

Wall Profile Installation

39

Vertical Profile Feature Unit Plinths & Accessories

40 41

Metallic Plinth & installation Plinth Corner Connectors

Specification & Installation

69

Product Range Overview

70

Top Rail Installation

71

Mid Rail Installation

73

Installing Wall Cabinets

74

Vertical Rail Installation Appliances &Internal Storage

76

Undermount & Freestanding Ovens

77

Fridges & Freezers

78

Planning with a Dishwasher Frame

79

Gollinucci

Matrices

82

Kitchen Fascia Matrix for Handleless Rail Sizes

84

Door Combnations for Handleless Kitchens


RECESSED RAIL SYSTEMS

HANDLELESS RAIL GUIDE | PAGE 4

1


Introducing Recessed Rail Systems

06 - 07

Introducing Recessed Rail Systems

Compatible Door Ranges

Key Icons

TO

Below are some handy keys to help you navigate around this document.

P

TIP

Our top tips

TE

Please note

Important bits of information to consider when planning or fitting your kitchen E AG

SE E

P

NO

Nifty top tips from our designers and fitters

Refer to page

Look out for the ‘see page’ icon to aid navigation through this document

CO

DE

S

Product codes

UCT OD

EA

TU RE P

R

For quick reference, each page will have a summary of the product codes listed.

Feature products

Stand out products that can create feature within a kitchen design.

08

Porter

09

Hunton

10

Unity

12

Alpina

HANDLELESS RAIL GUIDE | PAGE 5

www.pws.co.uk

F


HANDLELESS RAIL GUIDE | PAGE 6

INTRODUCING RECESSED RAIL SYSTEMS

Aluminium (No code suffix)

White (MW)

Graphite (MG)

Brushed Brass Brushed Copper (B) (C)

The Recessed Rail Profile is designed to create a hand void behind the door. Cabinets need to be modified for installation of the rail profiles. Designed for use with our Porter & Hunton slab doors, as well as our UNITY and Alpina made-to-measure ranges. Available in 5 stocked finishes: Aluminium, Matt White, Matt Graphite, Brushed Brass and Brushed Copper.


Recessed Rail Profile

Slab Door

PRODUCT INFORMATION

STOCK FINISHES

Aluminium, Matt White, Matt Graphite, Brushed Brass and Brushed Copper.

SEE

COMPATIBLE DOOR RANGE(S)

^

Porter Appliance Doors and Porter Wall Doors shown in Porcelain. Porter Base Doors shown in Hartforth Blue. With Brushed Copper Recessed Rails and Metallic Plinth.

PA

Porter

Hunton

Unity

Alpina Timber Veneer Collection

GE

Please refer to pages xx-xx of this document for full listings of compatible door ranges.

HANDLELESS RAIL GUIDE | PAGE 7

Worktop (Shown with Sharks Nose edge profile)


HANDLELESS RAIL GUIDE | PAGE 8

COMPATIBLE DOOR RANGES

Porter, shown in Dove Grey (Gloss) and Regiment (Matt) with Brushed Brass recessed rails.

PORTER

6Year

GUARANTEE

Stocked Range

Handleless Rail Sizes

Painted Finish

Paint-to-Order Service

Bespoke Door Sizes

Door Drilling Service

6 Year Guarantee

PRODUCT INFORMATION

2 working days

SE E

P

A pure slab door for an ultra-modern look, Porter is available in both matt and high gloss finishes in a range of colours. E AG

Additional information on Porter can be found in section 1 of our Directory & Pricelist.

STOCKED FINISHES Prefix code for door range/colour shown in brackets.

MATT

GLOSS

PRODUCT OVERVIEW

WHITE (PMW)

PORCELAIN (PMN)

CASHMERE (PMH)

WHITE (PW)

PORCELAIN (PN)

CASHMERE (PH)

DOOR STYLE

Slab (over-painted)

DOOR THICKNESS

18mm

SUBSTRATE

MDF

FINISH­­­

Painted (matt / gloss finishes)

REVERSE

Matching matt melamine reverse

CERTIFICATION

Fira Gold

PRICE BAND

DOOR FINISH DOVE GREY (PMV)

HARTFORTH BLUE (PMB)

SILVER GREY (PMS)

GRAPHITE (PMG)

DUST GREY (PMU)

DOVE GREY (PMV)

GRAPHITE (PG)

SILVER GREY (PS)

DUST GREY (PU)

£ £

BOARD MATCH

CASHMERE

Egger U702

DOVE GREY

Egger U708

DUST GREY

Egger U732, Kronospan 0171

GRAPHITE

Egger U961

HARTFORTH BLUE

Egger U599, Kronospan 8984BS

PORCELAIN

Egger W1200, Kronospan 101

SILVER GREY

Egger U765

WHITE

Egger W1000


Hunton, shown in Putty

HUNTON

6Year

GUARANTEE

Stocked Range

Handleless Rail Sizes

Painted Finish

Paint-to-Order Service

Bespoke Door Sizes

Door Drilling Service

6 Year Guarantee

PRODUCT INFORMATION

2 working days

SE E

P

A modern take on a classic shaker design, this smooth painted, 1 piece shaker can be used with the handleless rail system to create a contemporary design with classic features, using Huntons thin frame design. E AG

Additional information on Porter can be found in section 1 of our Directory & Pricelist.

STOCKED FINISHES Prefix code for door range/colour shown in brackets.

MATT PRODUCT INFORMATION DOOR STYLE

Narrow framed shaker

DOOR THICKNESS

18mm

SPECIFICATION

HDF

FINISH­­­

Matt painted (smooth finish)

REVERSE

Matching matt melamine reverse

CERTIFICATION

Fira Gold

PRICE BAND

DOOR FINISH PORCELAIN (HUP)

DUST GREY (HUU)

HARTFORTH BLUE (HUB)

HARTFORTH BLUE

£ £ £

BOARD MATCH Egger U599, Kronospan 8984BS

PORCELAIN

Egger W1200, Kronospan 101

DUST GREY

Egger U732, Kronospan 0171

HANDLELESS RAIL GUIDE | PAGE 9

COMPATIBLE DOOR RANGES


UNITY

5Year

GUARANTEE

Made-to-Measure Collection

Handleless Rail Sizes

Woodgrain Effect

Bespoke Door Sizes

Door Drilling Service

5 Year Guarantee

P

PRODUCT INFORMATION

2 working days

Unity is a made-to-measure collection of edged slab doors, available in an extensive choice of 20 finishes including high gloss, soft-touch super matt, metallics and woodgrain effect with a choice two edge options. Manufactured in the UK, doors are available in any size (Up to 2400mm high x 1200mm wide) and with the additional flexibility of angled doors the UNITY collection is ideally suited to kitchens, bedrooms and bathrooms.

DOOR STYLE

Slab - edged

DOOR THICKNESS

18mm

SUBSTRATE

Gloss/ Matt - MDF Woodgrain/ Concrete - MFC

E AG

SE E

HANDLELESS RAIL GUIDE | PAGE 10

COMPATIBLE DOOR RANGES

Gloss Colours & Metallic: Acrylic front face with matching matt PVC reverse.

Additional information on Unity can be found in section 1 of our Directory & Pricelist.

STOCKED FINISHES

Supermatt: Matt PVC front face with matching matt reverse.

FINISH

Prefix code for door range/colour shown in brackets.

Woodgrain effect/ Feature melamine foil (textured finish) Melamine face chipboard with matching reverse.

GLOSS COLOURS REVERSE

Matching matt melamine colour/ foil

CERTIFICATION

Fira Gold

£

PRICE BAND

PURE WHITE

CASHMERE

LIGHT GREY

Co-ordinating board options: Please see page 1.12 for a list of suggested co-ordinated MFC board options for UNITY finishes.

GRAPHITE

DUST GREY

GLOSS METALLIC FINISHES

EDGE OPTIONS Melamine face chipboard with matching reverse.

Note: Metallic colours have a directional finish as indicated by arrows on the protective film. Arrows should all face the same direction when fitting. Drilling must be specified left or right hand with metallic doors. FJORD METALLIC

GOLD METALLIC

SUPERMATT FINISHES

Matching AirTech Edge

(Matching Edges Only)

NEW

WHITE

CASHMERE

PEBBLE GREY

WOODGRAIN EFFECT

NEW

LIGHT GREY

DUST GREY

INDIGO BLUE

Two-Tone 3D glass effect

GRAPHITE

(Matching Edges Only)

NOTES: - Two-tone 3D glass effect edging is available in gloss finishes only. - End panels are edged all 4 sides as standard and are supplied in matching edge only. - Pelmet & plinth are edged on one long side only with a matching edge.

CHARACTER GRAPHITE

RECLAIMED OAK

WHITE HALIFAX OAK

NEW CONCRETE FINISHES

NATURAL DAVOS OAK

SEPIA GLADSTONE OAK

BLACK ASH

Made-tomeasure sizes

Made-toManufactured measure sizes in the UK

11 day lead time

Fira Gold 11 day Certification

lead time BRUNSWICK CONCRETE

HAYWARD CONCRETE

TRELLICK CONCRETE

Manufactured High gloss or fingerin the UK print free supermatt

5 year

Fira Gold guarantee Certification

High gloss or fingerprint free supermatt

5 year guarantee


HANDLELESS RAIL GUIDE | PAGE 11 Unity, shown in Graphite & Light Grey with Graphite recessed rails.


ALPINA

6Year

GUARANTEE

Made-to-Measure Collection

Real Timber Veneer

Handleless Rail Sizes

Bespoke Door Sizes

6 Year Guarantee

PRODUCT INFORMATION

P

Alpina is a made-to-measure timber veneer collection, available in 5 striking woodgrains in a Matt finish. These premium veneer doors will add style to any modern kitchen design and works well when mixed with other frontals.

SE E

HANDLELESS RAIL GUIDE | PAGE 12

COMPATIBLE DOOR RANGES

E AG

Additional information on Unity can be found in section 1 of our Directory & Pricelist.

STOCKED FINISHES Prefix code for door range/colour shown in brackets.

MATT FINISHES

PRODUCT OVERVIEW DOOR STYLE

Slab - edged

DOOR THICKNESS

19mm

SUBSTRATE

Chipboard

FINISH

Real Timber Veneer

REVERSE

Matching Veneer (flat finish)

£

PRICE BAND

NATURAL OAK

DEEP OAK

(Horizontal grain)

(Horizontal grain)

(LNO)

(LDO)

£

£

£

£

BESPOKE DOOR SIZE PARAMETERS CHOOSE HEIGHT CHOOSE WIDTH

MATT FINISHES (heavily embossed texture)

MIN

MAX

HEIGHT

100mm

2540mm

WIDTH

100mm

897mm

NOTES ON GRAIN DIRECTION Grain direction varies for different woodgrains

SMOKED LARCH

MID OAK

BURNT ASH

(Horizontal grain)

(Horizontal grain)

(Horizontal grain)

(LSL)

(LMO)

(LBA)

Please refer to door images for grain direction by door finish. All accessories match grain direction of door, with the exception of plinth and cornice which are horizontal grain direction as standard.

Bespoke Door Sizes

26 day lead time

Made-to-measure


HANDLELESS RAIL GUIDE | PAGE 13

Porter, shown in White (Matt) with Aluminium recessed rails.

Alpina, shown in Burnt Ash with Graphite recessed rails.


HANDLELESS RAIL GUIDE | PAGE 14

2

RECESSED RAILS PRODUCT OFFERING


Recessed Rails Product Offering

16

Top Rails Profiles

17

Mid Rail Profiles

18

Vertical Profiles

19

Wall Unit Profiles

Signature Designs

21

Key Icons

TO

Below are some handy keys to help you navigate around this document.

P

TIP

Our top tips

TE

Please note

Important bits of information to consider when planning or fitting your kitchen. E AG

SE E

P

NO

Nifty top tips from our designers and fitters.

Refer to page

Look out for the ‘see page’ icon to aid navigation through this document.

CO

DE

S

Product codes

UCT OD

EA

TU RE P

R

For quick reference, each page will have a summary of the product codes listed.

Feature products

Stand out products that can create feature within a kitchen design.

Porter Gloss White & Burnt Ash

22

Porter Hartforth Blue & Porcelain

23

Porter Dove Grey & Regiment

HANDLELESS RAIL GUIDE | PAGE 15

www.pws.co.uk

F


TOP profiles for BASE units Top rail profiles cross functionality with style, the handleless aesthetic creates a modern linear, continuation of metallic accents throughout a kitchen space. CO

HANDLELESS RAIL GUIDE | PAGE 16

RAILS & ACCESSORIES

DE

S

When ordering, use the pre-fix codes for the relevant finish in place of ***

Aluminium

White (MW)

Graphite (MG)

Brass (B)

Copper (C)

Top profile, external corner joint,

Top profile for doors

90 degree 4100x56.5x27.2mm

Code GPT4100

56.5x27.5x27.5mm

Finish Aluminium

MW

GPTEX90

MG

GPT4100*** C

MW

MG

B

C

End caps for top

Top profile, internal corner joint

profiles, pair,

90 degree

1 left & 1 right hand

56.5x28.3x28.3mm

56.5x27.5mm

Finish

Code

Aluminium

MW

Code

Finish

GPTEND

Aluminium

MG

GPTIN90***

MW

MG

B

C

GPTEND*** B

C

Mid joint section

Securing brackets for top and mid

for top profile

rails, pack of 2, minimum order quantity of 25

56.5x8x28.5mm

Finish

Code GPTJOINT

Aluminium

GPTEX90*** B

GPTIN90

Finish

Code

Code

Finish

GPFIXING

Plastic Finish

Aluminium

MW

MG

B

C

GPTJOINT***


MID profiles for BASE units

S

When ordering, use the pre-fix codes for the relevant finish in place of ***

Aluminium

White (MW)

Graphite (MG)

Brass (B)

Copper (C)

End caps for mid

Mid profile for drawers

profiles, pair, 1 left & 1 right hand

4100x73x26mm NEW 1200x73x26mm

Code

Finish Aluminium

GPM4100 GPM4100**

73x27.5mm

MW

MG

Code

Finish

GPMEND

Aluminium

C

B

MW

MG

B

C

GPMEND*** NEW

GPM1200

Aluminium

Mid profile,

Mid profile,

internal corner joint

external corner joint

90 degree

90 degree

73x28.3x28.3mm

73x27.5x27.5mm

Finish

Code GPMIN90

Aluminium

MW

Code

Finish

GPMEX90

Aluminium

MG

GPMIN90***

GPMEX90*** B

C

MW

MG

B

C

Drawer line dishwasher frame, stainless steel finish, for use with

Securing brackets for top and mid

mid rail profile 645x590x28mm

quantity of 25

TU RE P

R

rails, pack of 2, minimum order UCT OD

EA

DE

F

CO

Mid rail profiles work hand-in-hand with drawer packs whilst adding another layer of linearity, resulting in a unique contemporary kitchen style.

Code

Finish

Code

Finish

GPDDWF

N/A

GPFIXING

Plastic Finish

HANDLELESS RAIL GUIDE | PAGE 17

RAILS & ACCESSORIES


VERTICAL profiles for TALL units

DE

S

White (MW)

Aluminium

Vertical rails work with larder units and appliance banks to add another dimension of metallic accents to a kitchen. CO

HANDLELESS RAIL GUIDE | PAGE 18

RAILS & ACCESSORIES

Brass (B)

Copper (C)

When ordering, use the pre-fix codes for the relevant finish in place of *** Vertical profile (lateral)

Vertical profile (Intermediate)

4200x53.3x41mm,

4200x71.6x41mm,

trim to size NEW

Code GPV4200END

trim to size

Code

Aluminium

GPV4200MID

MG

Finish

Code

Aluminium MW

MG

B

C

GPVAPPFILL

GPV4200MID***

GPV4200END*** B

GPV1970END

580x16x42mm

trim to size

Finish

MW

Plug/filler for a appliance fittings

NEW 1970x71.6x41mm,

1970x53.3x41mm, trim to size

NEW

Graphite (MG)

C

Aluminium

NEW

GPV1970MID

Aluminium

Finish Aluminium

MW

MG

B

C

GPVAPPFILL***

Porter, shown in Porcelain (Gloss) and Hartforth Blue (Matt) with Brushed Copper recessed rails.


PROFILES for WALL units

CO

To continue the true handleless aesthetic, use wall unit profiles to create a concealed purchase behind the frontal. DE

S

When ordering, use the pre-fix codes for the relevant finish in place of ***

Aluminium

White (MW)

Profile for wall

Aluminium wall curved

cabinets

profile for small curved door

3900x19.6x20mm 300x300mm

Code GPW3900

Finish

Code

Finish

Graphite (MG)

Brass (B)

Copper (C)

Wall curved profile for internal curved

600x600mm

wall unit

Code

Finish

Aluminium

MW

MG

B

C

GPW3900***

Aluminium wall profile shown behind feature glazed (Black) wall units.

GPCWS300SD

Aluminium

GPCWSIC600

Aluminium

HANDLELESS RAIL GUIDE | PAGE 19

RAILS & ACCESSORIES


HANDLELESS RAIL GUIDE | PAGE 20

Signature Designs The following pages demonstrate how kitchens can be planned using the handleless rail system, following current trends and evolving kitchen spaces. The comprehensive product offering allows for an abundance of design styles that can be tailored to a multitude of kitchen spaces. This section talks you though our kitchen designs, highlighting areas where handleless rails and accessories have been used.


I

B

G C

E K

A

H D

L

J F

TE

56.5x28.3x28.3mm

56.5x27.5x27.5mm

GPT4100MG

GPTIN90MG

GPTEX90MG

E

F

Mid profile for drawers,

Mid rail internal corner joint, 90 degree

4100x73x26mm

73x28.3x28.3mm

73x27.5x27.5mm

GPM4100MG

GPMIN90MG

GPMEX90MG

H

End caps for top profiles, pair, 1 left & 1 right hand

I

End caps for Mid profiles, pair, 1 left & 1 right hand

Mid rail external corner joint, 90 degree

End caps for Mid profiles, pair, 1 left & 1 right hand

56.5x27.5mm

73x27.5mm

19.6x3000x27mm

GPTENDMG

GPMENDMG

GPMENDMG

K

C-Shaped base feature end panel

325x70x70mm R

EA

EA

xxCP30H

L-Shaped half height feature end panel 325x1200x18mm

UCT OD

TU RE P

UCT OD

TU RE P

R

325x1200x18mm

F

xxxCEP325X1200

L

Half height internal corner post

F

J

Top rail external corner joint, 90 degree

4100x56.5x27.2mm

D

G

C

Top rail internal corner joint, 90 degree

xxxLEP325X650

R

B

Top rail profile for base doors

UCT OD

TU RE P

A

Supporting Porter accessories compatible with the handleless rails are highlighted in Green.

EA

Handleless rails and accessories are highlighted in Blue.

F

NO

Porter, shown in White (Gloss) with Graphite recessed rails. Featuring Alpina Burnt Ash wall units and breakfast bar.

HANDLELESS RAIL GUIDE | PAGE 21

SIGNATURE DESIGNS


HANDLELESS RAIL GUIDE | PAGE 22

SIGNATURE DESIGNS D

G F

B

A

H

E

Porter, shown in Porcelain (Gloss) and Hartforth Blue (Matt) with Brushed Copper recessed rails.

Handleless rails and accessories

A

Porter handleless accessories

Top rail profile for base doors

C

4100x56.5x27.2mm GPT4100C

B

Top rail external corner joint, 90 degree 56.5x27.5x27.5mm

I

GPTEX90C

C

Top rail internal corner joint, 90 degree 56.5x28.3x28.3mm GPTIN90C

GPVAPPFILLC

I

C-Shaped base feature end panel

685x70x70mm

685x960x18mm xxxCEP685X960

Base internal corner post

UCT OD

xxxCP30B

R

580x16x42mm

H

UCT OD

TU RE P

Plug/filler for appliance fittings

GPTENDC

EA

G

56.5x27.5mm

CP30

R

GPV4200MIDC

End caps for top profiles, pair, 1 left & 1 right hand

3000x147x11mm

TU RE P

4200x71.6x41mm, trim to size

F

Metallic plinth (Supplied with plinth clips)

EA

E

F

Vertical profile (Intermediate)

F

D


HANDLELESS RAIL GUIDE | PAGE 23

SIGNATURE DESIGNS G

K

C

I

N

B

D J

L

A

F O E

H

M

Porter, shown in Dove Grey (Gloss) and Regiment (Matt) with Brushed Brass recessed rails.

Handleless rails and accessories

A

B

Top rail profile for base doors 4100x56.5x27.2mm GPT4100B

D

E Mid profile for drawers 4100x73x26mm GPM4100B

G

56.5x28.3x28.3mm

GPTEX90B

GPTIN90B

F

Mid rail external corner joint, 90 degree

Mid rail internal corner joint, 90 degree

73x27.5x27.5mm

73x28.3x28.3mm

GPMEX90B

GPMIN90B

I

Metallic plinth (Supplied with plinth clips) 3000x147x11mm

GPV4200MIDB

BP30

K

Top rail internal corner joint, 90 degree

56.5x27.5x27.5mm

4200x71.6x41mm, trim to size

End caps for Mid profiles, pair, 1 left & 1 right hand

C

Top rail external corner joint, 90 degree

End caps for top profiles, pair, 1 left & 1 right hand 56.5x27.5mm GPTENDB

L

Plug/filler for appliance fittings

C-Shaped base feature end panel

73x27.5mm

580x16x42mm

325x1200x18mm

GPMENDB

GPVAPPFILLB

xxxCEP325X1200

UCT OD

EA

TU RE P

R

J

H

Vertical profile (Intermediate)

Porter handleless accessories

F

Half height internal corner post

Drawer line dishwasher frame

R

GPDDWF

UCT OD

TU RE P

R

TU RE P

xxxCP30H

EA

TU RE P EA

590x645mm UCT OD

F

R

325x70x70mm UCT OD

EA

325x650x18mm

F

xxxLEP325X650

O

N

L-Shaped base feature end panel

F

M


HANDLELESS RAIL GUIDE | PAGE 24

3

SPECIFICATION & INSTALLATION


Specification & Installation

Top Rails & Accessories

26

Top Rail

28

Corner Joints

29

End Caps

29

Mid Joint Mid Rails & Accessories

30

Mid Rail

32

Corner Joints

33

End Caps

Appliance/ Larder Profiles

35

Appliance Filler Rail

36

Vertical profile (Intermediate)

37

Vertical Profile (Lateral)

Wall Unit Profiles

Key Icons

38

Profile For Wall Cabinets

39

Vertical Profile Feature Unit

TO

Below are some handy keys to help you navigate around this document.

P

40

TIP

Our top tips

Please note

Important bits of information to consider when planning or fitting your kitchen E AG

SE E

P

NO

Nifty top tips from our designers and fitters

TE

Refer to page

Look out for the ‘see page’ icon to aid navigation through this document

CO

DE

S

Product codes

EA

TU RE P

R

For quick reference, each page will have a summary of the product codes listed. UCT OD

Plinths & Corner Connectors

Feature products

Stand out products that can create feature within a kitchen design.

41

Metallic Plinth Metallic Plinth Corner Connectors

HANDLELESS RAIL GUIDE | PAGE 25

www.pws.co.uk

F


HANDLELESS RAIL GUIDE | PAGE 26

TOP RAILS & ACCESSORIES

Porter, shown in Porcelain (Gloss) and Hartforth Blue (Matt) with Brushed Copper recessed rails.

BASE UNITS TOP RAIL For use on full height doors and drawer pack applications. Available in straight lengths of 4.1 metres, the rail can be cut to size using a circular chop saw, according to the design requirements.

Code

Description

GPT4100

Aluminium top rail profile for base doors

GPT4100***

Top rail profile for base doors

GPFIXING

Securing brackets for top and mid rails

Aluminium (No prefix)

(MW)

(MG)

(B)

(C)


39/40 27

22.5 57.5

56.5

R5

32

4

27.2

To accommodate the rail, the cabinet requires a routered detail as per technical illustration (Right)

SIDE PROFILE

Router detail on 18mm cabinet gable

INSTALLATION Securing brackets (GPFIXING) fit the rail profiles to the cabinet. These need to be ordered separately (set of 2, minimum order quantity of 25). 13mm

1

NO

2

TE

Securing bracket should sit flush against the routered edge of the cabinet that has been created for the handleless rail. This shoud leave the brackets screw holes 13mm from the cabinet edge.

1

Slide clip along rail

2

Rotate and lock into position on bracket

CABINETRY

34

Worktop

684.5

Door

Cabinet

720

900

HANDLELESS RAIL GUIDE | PAGE 27

ROUTERING DETAIL


CO

Top Rail, Internal Corner Joint, 90°

DE

S

GPTIN90*** When ordering, use the pre-fix codes for the relevant finish in place of ***

Used when applying internal corner post and corner door solutions, in order to continue the rail around a corner. 28.3

56.5

GPTIN90 (Aluminium)

28.3

SIDE PROFILE

TOP PROFILE

01.

(MW)

(MG)

(B)

(C) Screws Provided

02. GPTIN90

Once connected, secure the rails to the corner connector by screwing into designated fixing points.

Simply slide rails onto the corner connectors fixing points.

Top Rail, External Corner Joint, 90°

CO

HANDLELESS RAIL GUIDE | PAGE 28

TOP RAILS & ACCESSORIES

DE

S

GPTEX90*** When ordering, use the pre-fix codes for

Used when applying internal corner post and corner door solutions, in order to continue the rail around a corner.

27.5 56.5

the relevant finish in place of ***

(MW)

(MG)

(B)

(C)

27.5 GPTEX90 (Aluminium)

SIDE PROFILE

01.

Simply slide rails onto the corner connectors fixing points.

TOP PROFILE

02.

Screws Provided

Once connected, secure the rails to the corner connector by screwing into designated fixing points.


CO

Top Rail, End Caps (L/R Pair)

DE

S

the relevant finish in place of ***

Used to terminate a run. Recommended for use with undermount ovens to conceal cut edge of profile.

56.5

(MW)

27.5 GPTEND (Aluminium)

GPTEND*** When ordering, use the pre-fix codes for

(MG)

2

SIDE PROFILE

TOP PROFILE

(B)

(C)

TO

NO

To secure the end cap to the rail, simply slot the cap onto the rail and screw the two pieces together using the fixings supplied. TE

P

These products are lacquered in a flat finish and may vary slightly from the anodized profiles.

TIP

When using end caps, a 2mm spacing must be taken into account (when cutting down the trim)

Screws Provided

CO

Mid Joint Section for Top Profile A mid joint section is available to hide joints in certain applications where two top rail profiles meet. (e.g. when a straight rail profile meets a curved rail section)

DE

S

GPTJOINT*** When ordering, use the pre-fix codes for the relevant finish in place of ***

8

56.5

(MW)

(MG)

(B)

(B)

28.5 GPTJOINT (Aluminium)

FRONT PROFILE

SIDE PROFILE

Screws Provided

TO

01.

P

TIP

02.

When using mid joints, a 5mm spacing must be taken into account when cutting down the rail profiles that are being joined at either side.

Rotate the provided screws into the mid joint section so that they are of even lengths on both sides.

Once the threads have been inserted, align and slide the joint into the profiles on the rear of the rail.

HANDLELESS RAIL GUIDE | PAGE 29

TOP RAILS & ACCESSORIES


HANDLELESS RAIL GUIDE | PAGE 30

MID RAILS & ACCESSORIES Porter, shown in White (Gloss) with Graphite recessed rails. Featuring Alpina Burnt Ash wall units.

BASE UNITS MID RAIL For use on drawer pack applications. Available in straight lengths of 4.1 meters, the rail can be cut to size using a circular chop saw, according to the design requirements. Manufactured out of anodized aluminium.

Code

Description

GPM4100

Aluminium mid rail profile for drawer packs

GPM4100***

Mid rail profile for drawer packs

GPM1200

Aluminium mid rail profile for drawer packs

GPFIXING

Securing brackets for top and mid rails

Aluminium (No prefix)

(MW)

(MG)

(B)

(C)


HANDLELESS RAIL GUIDE | PAGE 31

ROUTERING DETAIL

39/40

To accommodate the rail, the cabinet requires a routered detail as per technical illustration (Right)

27

R5

20.5 73

32

73

20.5

R5

26 SIDE PROFILE

Router detail on 18mm cabinet gable

INSTALLATION Securing brackets (GPFIXING) fit the rail profiles to the cabinet. These need to be ordered separately (set of 2, minimum order quantity of 25). 13mm

1

NO

2

TE

Securing bracket should sit flush against the routered edge of the cabinet that has been created for the handleless rail. This shoud leave the brackets screw holes 13mm from the cabinet edge.

Slide clip along rail

1

2

Rotate and lock into position on bracket

CABINETRY

34

34 160

Door

325 160 34

Door

Cabinet

325

720

34

325

720


CO

Mid Rail, Internal Corner Joint, 90°

DE

S

GPMIN90*** When ordering, use the pre-fix codes for the relevant finish in place of ***

Used when applying half height internal corner post, in order to continue the rail around a corner.

28.3

73

GPMIN90 (Aluminium)

28.3

SIDE PROFILE

01.

TOP PROFILE

(MW)

(MG)

(B)

(C)

02.

73

Screws Provided

Once connected, secure the rails to the corner connector by screwing into designated fixing points.

Simply slide rails onto the corner connectors fixing points.

Mid Rail, External Corner Joint, 90°

CO

HANDLELESS RAIL GUIDE | PAGE 32

MID RAILS & ACCESSORIES 28.3

DE

S

GPMEX90*** When ordering, use the pre-fix codes for

Used when applying half height external corner posts or dedicated half height L or C shaped panels, in order to continue the rail around a corner.

the relevant finish in place of ***

27.5

73

GPMEX90 (Aluminium)

SIDE PROFILE

01.

Simply slide rails onto the corner connectors fixing points.

(MW)

(MG)

(B)

(C)

27.5

TOP PROFILE

02.

Screws Provided

Once connected, secure the rails to the corner connector by screwing into designated fixing points.


CO

Mid Rail, End Caps (L/R Pair)

BACK PROFILE

GPMEND*** the relevant finish in place of ***

2

73

GPMEND (Aluminium)

S

When ordering, use the pre-fix codes for

Used to terminate a run. Recommended for use with undermount ovens and dishwasher frame (GPDDWF) to conceal cut edge of profile. 27.5

DE

SIDE PROFILE

(MW)

(MG)

(B)

(C)

TO

NO

To secure the end cap to the rail, simply slot the cap onto the rail and screw the two pieces together using the fixings supplied.

Screws Provided

Porter, shown in White (Matt) with Aluminium recessed rails.

TE

P

These products are lacquered in a flat finish and may vary slightly from the anodized profiles.

TIP

When using end caps, a 2mm spacing must be taken into account (when cutting down the trim)

HANDLELESS RAIL GUIDE | PAGE 33

MID RAILS & ACCESSORIES


HANDLELESS RAIL GUIDE | PAGE 34

APPLIANCE & LARDER PROFILES

Porter, shown in Dove Grey (Gloss) and Regiment (Matt) with Brushed Brass recessed rails.


APPLIANCE/ LARDER UNITS APPLIANCE FILLER RAIL Aluminium

Used to conceal the void behind an appliance when used in an appliance housing using vertical rail profiles. The trim can be cut down to suit different sized appliances and applications. Designed to fit seamlessly inside both Vertical Profiles GPV4200MID & GPV4200END. Code

Description

GPVAPPFILL

Aluminium Plug/ Filler for appliance fittings, 580mm

GPVAPPFILLMW

Matt White Plug/ Filler for appliance fittings, 580mm

GPVAPPFILLMG

Matt Graphite Plug/ Filler for appliance fittings, 580mm

GPVAPPFILLC

Brushed Copper Plug/ Filler for appliance fittings, 580mm

GPVAPPFILLB

Brushed Brass Plug/ Filler for appliance fittings, 580mm

Matt White

Matt Graphite

Brushed Brass

Brushed Copper

INSTALLATION

Fixing holes

35

42

TO

16 Screw-fix into cabinet gable using 3No. 4x16mm screws before installation of the appliance.

P

TIP

It is possible to drill through the trim if the appliance requires a screw-fixing into the cabinet.

35 41

Appliance Filler

16

Appliance

Designed to match both vertical profiles for a seamless look and screw-fixed into the cabinet.

NO

TO

Appliance filler rail shown mounted behind appliance. P

TIP

TE

Appliance plug shown set down from the top of the appliance by 10mm. When stacking appliances, we recommend leaving a 10mm gap to the top and bottom of both appliances. When altering the height of the oven filler for appliances that are above or below 580mm, take care when cutting the filler as this can create sharp edges which will need treating.

HANDLELESS RAIL GUIDE | PAGE 35

APPLIANCE & LARDER PROFILES


APPLIANCES/ LARDER UNITS VERTICAL PROFILE (INTERMEDIATE) Used in the scenario where two opening doors meet. Available in lengths of 4.2 metres, and can be cut-to-size using a circular chop saw. Manufactured out of anodized aluminium.

Code

Description

GPV4200MID

Aluminium vertical profile (Intermediate)

GPV4200MID***

Vertical profile in various finishes (Intermediate)

GPV1970MID

Aluminium vertical profile (Intermediate)

Aluminium (No prefix)

(MW)

(MG)

(B)

(C)

INSTALLATION The front of the gables on the cabinets need to be set back by 20mm for the trim to overlap behind the doors. Due to the width and placement of the profile, a 35mm spacer is required at the back between the two cabinets to maintain space created by the profile.

The profile is securely fixed to the cabinets with 4 x 30mm countersunk screws.

35mm spacer required between cabinets (not supplied)

35

16 20

72 TO

HANDLELESS RAIL GUIDE | PAGE 36

APPLIANCE & LARDER PROFILES

P

TIP

To conceal fixing, hide screw holes behind hinge plates.


APPLIANCES/ LARDER UNITS VERTICAL PROFILE (LATERAL) Used in the scenario where you have an opening door to one side and don’t require access to a handle on the opposite side. It can also be used to keep symmetry at the end of a run where an end panel or accessory is fitted. Available in lengths of 4.2 metres, and can be cut-to-size using a circular chop saw. Manufactured out of anodized aluminium. Code

Description

GPV4200END

Aluminium vertical profile (Intermediate)

GPV4200END***

Vertical profile in various finishes (Intermediate)

GPV1970END

Aluminium vertical profile (Intermediate)

Aluminium (No prefix)

(MW)

(MG)

(B)

(C)

INSTALLATION The front of the gables on the cabinets need to be set back by 20mm for the trim to overlap behind the doors. Due to the width and placement of the profile, a 35mm spacer is required at the back between two cabinets and a 66mm spacer between cabinet and end panel (18mm)/feature post (50mm).

Image shows cabinet and end panel/feature post planning. In this scenario a 66mm spacer is required (Not supplied).

35mm spacer required between cabinets (not supplied)

35

16

TO

TO

20

P

TIP

53 To conceal fixing, hide screw holes behind hinge plates.

P

TIP

To fix the rail to the end panel, we recommend screwing through the inside of the cabinet and through the rail until the screw enters the end panel.

HANDLELESS RAIL GUIDE | PAGE 37

APPLIANCE & LARDER PROFILES


HANDLELESS RAIL GUIDE | PAGE 38

PROFILES FOR WALL UNITS

WALL UNITS PROFILE FOR WALL CABINETS Rail profile for wall units create extra purchase at the bottom of a frontal whilst maintaining a true handleless aesthetic. Rail profiles for wall units come in 3.9 metre lengths. It can be cut-to-size using a circular chop saw to fit between gables.

Code

Description

GPW3900

Aluminium profile for wall cabinets

GPW3900***

Profile for wall cabinets in various finishes

Aluminium (No prefix)

(MW)

(MG)

(B)

Routering cabinet detail

(C)

Wall rail profile

Fitted rail detail

27 8

20 7.5 3 7.5

Door

9

18 19.6

Cabinet Router detail on 18mm cabinet base

20

7

INSTALLATION

01. 1

A groove (3.2mm high, 8mm deep) must then be routed into the base panel using a slotting cutter.

2

The rail profile then slots into the routed groove (clear silicone adhesive should be used to bind the rail with the panel).

TE

The base panel of the wall unit needs to be set back 20.8mm to accommodate the rail profile within the overall depth of the cabinet.

TO

NO

02.

P

TIP

Trend C143X1/4 TC 3.2mm (Recommended slotting cutter)


WALL UNITS VERTICAL PROFILE FEATURE UNIT

P

TIP

Make use of your intermediate rail cut-offs by utilising them in a handleless feature wall unit. (Shown above)

The profile is securely fixed to the cabinets with 4 x 30mm countersunk screws.

35mm spacer required between cabinets (not supplied)

35

16 20

TO

TO

Porter, shown in Porcelain (Gloss) and Hartforth Blue (Matt) with Brushed Copper recessed rails.

P

TIP

72 To conceal fixing, hide screw holes behind hinge plates.

HANDLELESS RAIL GUIDE | PAGE 39

PROFILES FOR WALL UNITS


HANDLELESS RAIL GUIDE | PAGE 40

PLINTHS & CORNER CONNECTORS

SUPPORTING ACCESSORIES METALLIC PLINTHS Supporting plinth available in corresponding finishes to complete the look. Available in lengths of 3 metres and can be cut-to-size using a circular chop saw.

Code

Description

SSP30

Stainless Steel metallic plinth

BP30

Brushed Brass metallic plinth

CP30

Brushed Copper metallic plinth

SSCPS560SDL

Stainless Steel metallic curved plinth section, left hand

SSCPS560SDR

Stainless Steel metallic curved plinth section, right hand

SSICCPS900

Stainless Steel internal curved plinth

Stainless Steel

Brushed Brass

Brushed Copper

INSTALLATION

01.

02.

Slide part A onto part B. Once plinth clips are installed, attach plinth onto cabinet legs.

Part B slides on the track at the back of the plinth. Once positioned rotated to lock in place.

End cap for standard plinth

147

12

3000

SSPEPLG


PLINTH CORNER CONNECTORS Used when connecting plinth at a specific angle for a simple and neat installation.

Stainless Steel

NO

Brushed Brass

Brushed Copper

These products are lacquered in a flat finish and may vary slightly from the finish of the metallic plinths.

TE

90 Degree corner joint 23.6

SSJC90 BJC90 CJC90

2 x plinth sections slot into the plinth corner connector at a 90 degree angle. Screwless installation. Push to fit together.

Multi-corner joint

SSMC

BMC CMC

Plinth profiles

8

12 23.6

48 8 Flexible Joint for angled plinth run

15

Plinth profiles

8

Plinth profiles

12 16

Straight plinth joint

135 degree corner joint

SSSJC BSJC CSJC

12

SSJC135 BJC135 CJC135

27

Plinth profiles

Plinth profiles

12 20 14 6.5 Plinth profiles Plinth profiles

HANDLELESS RAIL GUIDE | PAGE 41

PLINTHS & CORNER CONNECTORS


HANDLELESS RAIL GUIDE | PAGE 42

4

WORKING WITH APPLIANCES & INTERNAL STORAGE


Working with Appliances & Internal Storage

Key Icons

TO

Below are some handy keys to help you navigate around this document.

P

TIP

Our top tips

TE

Please note

Important bits of information to consider when planning or fitting your kitchen E AG

SE E

P

NO

Nifty top tips from our designers and fitters

Refer to page

Look out for the ‘see page’ icon to aid navigation through this document

CO

DE

S

Product codes

UCT OD

EA

TU RE P

R

For quick reference, each page will have a summary of the product codes listed.

Feature products

Stand out products that can create feature within a kitchen design.

44

Planning With A Dishwasher Frame

45

Gollinucci

46

Undermount Ovens & Microwaves

47

Integrated Ovens

48

Washing Machine & Tumble Dryer

49

Fridges & Freezers

50

Kesseböhmer

HANDLELESS RAIL GUIDE | PAGE 43

www.pws.co.uk

F


FEATURE

Planning with a Dishwasher Frame

O D UC T PR

The Dishwasher Frame is designed for use with dishwashers on handleless kitchen designs where the continuation of the drawer pack is required across the dishwasher. The frame is machined to accept the mid profile, for both recessed and flush rails, which is not supplied and should be ordered with the rest of the kitchen.

NO

HANDLELESS RAIL GUIDE | PAGE 44

WORKING WITH APPLIANCES

Code

Description

GPDDWF

Drawer line dishwasher frame, stainless steel finish, for use with mid rail profile

TE

Dishwasher frame is 28mm thick

N

TE O

HOW DOES THIS AFFECT PLANNING & DESIGN? The Dishwasher Frame is 28mm thick. It is therefore required to pull all adjacent cabinets forward by 28mm to align frontals and rails. The Dishwasher Frame accommodates for 2 x 325mm drawer frontals. The top drawer frontal will overhang the top of the dishwasher frame to allow for purchase with the above handleless rail.

a.

28mm

Adjacent cabinets pulled forward 28mm to accept Dishwasher Frame thickness

Top Rail

325 x 597mm frontal (xx326)

b.

Mid Rail

325 x 597mm frontal (xx326)

c. 28mm Dishwasher Frame (GPDDWF)

a.

To accommodate the thickness of the dishwasher frame, adjacent cabinets will need to be pulled forward by 28mm to align frontals and rails.

b.

In order to accommodate the swing of the frame, the plinth below the dishwasher requires to be notched.

c.

On recessed rail applications, it is recommended that the mid rail end caps are used to conceal the profile edge, resulting in a quality installation.


INSTALLATION OF DISHWASHER FRAME

01.

Start by installing the mid rail to the Dishwasher Frame. The Mid Rail sits inside the machined void. Next, attach the frontals by screwing through the rear of the frame using the pre-drilled fixing holes.

02 .

Fix Dishwasher Frame (with frontals and mid rail attached) to the Dishwasher door. Use the pre-drilled fixing holes on the dishwasher door to locate fixing points.

INSTALLATION OF GOLLINUCCI PULL-OUT WASTE BIN DID YOU KNOW? To maintain a strong, linear look, the Dishwasher Frame (GPDDWF) can also be used with internal pull-out waste bins. We recommend using 580-GY Gollinucci Bins. The bins all come with fitting instructions. These should be referred to when constructing the product prior to installation onto the Dishwasher Frame system.

28mm

Remember to pull forward adjacent cabinets by 28mm to accommodate the Dishwasher Frame thickness, and make use of Mid Rail End Caps for a high quality installation. TO

P

Cabinet Gable

TIP

Dishwasher Frame (GPDDWF)

Pull-Out Waste Bin (580-GY recommended)

1

Screw attachment bracket onto the Dishwasher Frame using 3 x fixing points and adjust as required.

2

Using L-Shaped brackets, fix top frame of the Pull-Out Bin to Dishwasher Frame.

Please refer to fitting instructions provided with bin for a detailed installation guide.

112 Attachment Bracket 32

191

HANDLELESS RAIL GUIDE | PAGE 45

WORKING WITH APPLIANCES


UNDERMOUNT OVENS/ MICROWAVES Integrated ovens and microwaves can be utilised to make the most of undercounter space, however, some details will need to be taken into consideration when planning around the handles rail system.

Undermount Oven SCENARIO 1 Scenario 1 shows the rails terminated on each side of the appliance with top rail end caps (GPTEND) and mid rail end caps (GPMEND) attached. A filler is fixed below the oven to fill the left over void.

Undermount Oven SCENARIO 2 To continue the top rail profile across a run of units, with a undermount oven, a small filler is required at the top and bottom of the appliance. Filler

Filler

E AG

For more information on end caps, please refer to page xx for top rail applications & page xx for mid rail applications.

N

P

Filler

SE E

HANDLELESS RAIL GUIDE | PAGE 46

WORKING WITH APPLIANCES - INTEGRATED OVEN

TE O

Use touch up kit to hide cut edge on fillers.

Undermount Microwave SCENARIO 1

Undermount Microwave SCENARIO 2

To allow the microwave to sit directly under the worktop, a split in the top rail will need to be taken into consideration. Use top rail end caps (GPTEND) to cleanly terminate the rail either side of the microwave.

Some microwave appliances will have an overhang at the top. To allow the rail to flow without any breaks, we suggest using the overhang to align the top of the microwave with the adjacent doors.

325mm Door

283mm Door

To utilise the space below the microwave, we suggest using a frontal with a height of 325mm in this scenario.

To utilise the space below the microwave, we suggest using a frontal with a height of 283mm in this scenario.


INTEGRATED OVENS SIDE-BY-SIDE SINGLE OVENS To achieve the look of a side-by-side oven housing, we recommend a certain cabinet configuration which allows the cabinets to support the weight of the two ovens.

TO

Front profile P

TIP

600

N

600 Use handles or push open mechanisms where handleless rails aren’t applicable.

TE O

We suggest constructing your base cabinet with the top panel resting on top of the side panels, this helps to support the weight of the above ovens. 1200

N

770

TE O

1200 This configuration also creates an extra step for the oven to sit on. This keeps the oven overhang above the top rail profile.

Cabinet Oven

Porter, shown in White (Gloss) with Graphite recessed rails.

Cabinet Side profile

APPLIANCE HOUSING CONFIGURATIONS

Double oven housing can vary depending on style and size of your appliances. HANDLELESS APPLIANCE HOUSING MATRIX PORTER & HUNTON Please use this document as a one page guide to understand the product availabilty in the Porter and Hunton ranges, when planning built in appliance housings in a handleless design. The majority of these appliance configurations eradicate the need for fiilers and are based on the industry standard; aligning with the majority of appliance brands. The sizes in the matrix below are inclusive of sizes available in Porter and Hunton from the lay-on ranges, to offer a wider breadth of options. Please Note - Tomba and Ellerton ranges include vertical handle profiles and range content differs from the below. Please refer to the the Price List for full range availability. Aperture sizes are shown adjacent to the appliance type, with the actual appliance size shown beneath, in italics.

Medium Height Installation (cabinet heigh of 1970mm)

Porter, shown in Porcelain (Gloss) and Hartforth Blue (Matt) with Brushed Copper recessed rails.

1970mm Cabinet

645

645

645

600 (595)

715

2 X COMPACT CONFIGURATION

570

355 355

139 283

175 175

283

175 175

140 570

283 283

645

645

645

645

645

645

139 283

175 175

283

283

175 175

283

645

139 715

570

355 355

715

2150mm Cabinet

715

895

290 570

filler

460 (455)

600 (595)

600 (595)

139

450

645

645

645

139

139 139

283

715

570

570

160 355

645

139 139

283

283

283

139 175 175

283

283

175 175

685

685

645

139

139

175

645 895

645

645

645

139

175

685

645

645

715

175 355

140

685

685

139

139

570

283

685

715

715

685

570

Tall Height Installation (cabinet heigh of 2150mm)

715

P SE E

645

SINGLE OVEN, COMPACT AND WARMING DRAWER CONFIGURATIONS

645

685

115

115

325

283

filler

715

715

175

175

filler

355

355

175 175

490

filler

570

715

895

Medium Height Installation (cabinet heigh of 1970mm)

570

715

685

645

139

139

139

283

325

355

2150mm Cabinet

600 (595) 175 450

400

175

685

645

filler

645

685

645

645

139 175

175 175

175

715

175 355

Tall Height Installation (cabinet heigh of 2150mm)

COMPACT AND APPLIANCE CONFIGURATIONS

685

139 175

895

460 (455) 139 139

Medium Height Installation (cabinet heigh of 1970mm)

175 175

SINGLE OVEN AND MICROWAVE CONFIGURATIONS

715

filler

460 (455) 140

355

460 (455)

140

COMPACT AND WARMING DRAWER CONFIGURATION

645

460 (455) 460 (455)

139 175

490 460 (455) 600 (595)

355

715

1970mm Cabinet

1970mm Cabinet

355

715

570

139 355

283

645

355

450

715

139

355

600 (595)

139

715

175 175

139

139 139

645

685

2150mm Cabinet

Tall Height Installation (cabinet heigh of 2150mm)

355

Make the most of your appliances by viewing our appliance matrix on page xx for an extensive range of configurations.

Use appliance fillers (GPVAPPFILL**) to close the gap between the oven and rails. E AG

645

355

2 X COMPACT CONFIGURATIONS

715

2150mm 900 Cabinet (890)

325

355

490

283

645

160 490

600 (595) 139 355

355

DOUBLE OVEN CONFIGURATIONS

450

SINGLE OVEN CONFIGURATION

SINGLE OVEN AND COMPACT CONFIGURATIONS

600 (595)

715 355

645

140

460 (455)

600 (595)

filler

450

283

460 (455)

355

450

filler

COMPACT AND WARMING DRAWER CONFIGURATION

139 355

SINGLE OVEN AND MICROWAVE CONFIGURATIONS

490

900 (890)

140

283

645

DOUBLE OVEN CONFIGURATIONS

P

450 460 (455)

600 (595)

SINGLE OVEN AND WARMING DRAWER CONFIGURATIONS

355

SE E

SINGLE OVEN, COMPACT AND WARMING DRAWER CONFIGURATIONS

450

filler

283

SINGLE OVEN CONFIGURATIONS

E AG

490

460 (455)

460 (455)

140

355

Tall Height Installation (cabinet heigh of 2150mm)

450

645

COMPACT APPLIANCE CONFIGURATIONS

460 (455)

460 (455)

645

COMPACT AND WARMING DRAWER CONFIGURATIONS

685

460 (455)

645

600 (595) 139

1970mm Cabinet

645

SINGLE OVEN AND COMPACT CONFIGURATIONS

SINGLE OVEN AND WARMING DRAWER CONFIGURATIONS

SINGLE OVEN CONFIGURATIONS

645

See page xx for fitting instructions.

HANDLELESS RAIL GUIDE | PAGE 47

WORKING WITH APPLIANCES


N

TE O

PLEASE BE AWARE: • •

Appliances sizes vary, brand to brand and model to model. Some appliances may need to sit below the rail for access. For example, the detergent drawer on a washing machine.

WASHING MACHINES & TUMBLE DRYERS

The following configurations can be used for integrating washing machines / tumble dryers where there may not be the required height available on standard handle-less kitchens. This requires increasing the cabinet height to 750mm and adopting the below frontal sizes

N

HANDLELESS RAIL GUIDE | PAGE 48

WORKING WORKINGWITH WITH APPLIANCES APPLIANCES - INTEGRATED OVEN

Standard scenarios

TE O

Make sure the top rail doesn’t obstruct any of the buttons or compartments on your appliance.

Utility scenarios


UNDERMOUNT FRIDGES & FREEZERS

N

Undermount fridges & freezers can be a useful appliance in smaller spaces which might not have the room for full height appliances. When incorporating an undermount fridge or freezer into your handleless design, take note of the top rail position. If possible, adjust the appliances legs to allow the door to swing from under the top rail.

TE O

FULL HEIGHT FRIDGES & FREEZERS

Integrated fridges and freezers can create a more considered design, by keeping the fridge hidden, it allows a design to not be dictated by the colour or material of the appliance.

SE E

P

Our door offering caters for a range of integrated fridge/ freezer appliances, both in medium and tall height installations. E AG

See page xx & xx for information and installation on vertical rail profiles.

715 980 1245 1965

1245 980

715

TALL INSTALLATION HEIGHT

MEDIUM INSTALLATION HEIGHT

175

175

895 980

1245 1245

1245 895

980 715

HANDLELESS RAIL GUIDE | PAGE 49

WORKING WITH APPLIANCES - INTEGRATED OVEN WORKING WITH APPLIANCES


KESSEBÖHMER STORAGE SEE

HANDLELESS RAIL GUIDE | PAGE 50

WORKING KESSEBÖHMER WITH APPLIANCES - INTEGRATED OVEN

Our handleless door ranges are compatible with Kesseböhmer internal storage.

PA

GE

Please refer to Section 4 of The Directory for full Kesseböhmer offering.

BASE UNIT STORAGE Top

Top

Top

Ra

Ra

Ra

il

il

il

Pull-Out Towel Rack

Pull-Out Tray Rack

Base Unit Pull-Out

Use: Transforms narrow spaces, great for use on either side of your sink or oven.

Use: Transforms narrow spaces, great for use on either side of your sink or oven.

Movement: Tested to 60,000 cycles, the entire contents come out in a single movement.

Cabinet widths: 150mm

Cabinet widths: 150mm

Cabinet widths: 150, 300,400,500, 600mm

Tray styles: Silver Classic, Chrome Classic, Anthracite Style, Chrome Style

Tray styles: Silver Classic, Chrome Classic, Anthracite Style, Chrome Style

Tray styles: Silver Classic, Chrome Classic, Chrome Arena, Anthracite Style, Chrome Style

Vert ic

al R a il

LARDER UNIT STORAGE

Pull-Out Larder

Swing Larder

Tandem Larder

Convoy Premio

Movement: Tested to 60,000 cycles, the entire contents comes all the way out in a single movement.

Movement: Can be turned left or right (90 degrees) for easy access to either side.

Movement: The rear trays are automatically drawn forward when the front door is opened.

Movement: Open the door and the entire contents come all the way out in a single movement.

Cabinet widths: 300,400,500mm

Cabinet widths: 300mm

Cabinet widths:

Cabinet widths: 600mm

Tray styles: Silver Classic, Chrome Classic, Chrome Arena, Anthracite Style, Chrome Style

Tray styles: Chrome Arena, Chrome Style

Tray styles: Silver Classic, Chrome Classic, Chrome Arena, Anthracite Style, Chrome Style

Tray styles: Grey (no-shatter) glass-sided anti-slip trays

500,600mm - studio & full height


HANDLELESS RAIL GUIDE | PAGE 51

WORKING WITH APPLIANCES - INTEGRATED OVEN

KESSEBĂ–HMER

Top

Ra il

CORNER UNIT STORAGE

Magic Corner

LeMans II

Corner Carousel

Movement: Attached to the back of the door, both trays slide simultaneously for full access.

Movement: Each tray swings out of the cabinet completely and independently

Movement: Centre mounted for 360 degree access.

Cabinet widths: 900, 1000mm

Cabinet widths: 764, 800, 910, 960mm

Cabinet widths: 900x900mm

Tray styles: Silver Classic, Chrome Classic, Chrome Arena, Chrome Style

Tray styles: Silver Arena, Chrome Arena, Anthracite Style, Chrome Style

Tray styles: Chrome Arena, Chrome Style, Silver Classic, Chrome Classic TO

P

TIP

PLANNING WITH THE CONTINUATION OF A MID RAIL

The Porter Handleless accessory collection offers a continuation of linear rails throughout a design. Resulting in a high-end and very on-trend aesthetic. The LeMans II can be used when planning with top and mid rail profiles, maintaining storage functionality.

NO T

Notched Post /Mullion

E

Half Height Internal Corner Post **CP30H

When housing a LeMans II in Handleless kitchens, a notched post/mullion is required to support rails around the corner.

NO T

Mid Rail

SEE

Top Rail

LeMans II

E

When using drawer fronts’ on a corner scenario, it is recommended to adjust drilling positions towards the top & bottom of the drawer to ensure maximum stability. PA

GE

Please refer to page xx of this document for full listings of Porter Handleless accessories and installation.


PORTER HANDLELESS ACCESSORIES

HANDLELESS RAIL GUIDE | PAGE 52

5


Porter Handleless Accessories

Key Icons

TO

Below are some handy keys to help you navigate around this document.

P

TIP

Our top tips

TE

Please note

Important bits of information to consider when planning or fitting your kitchen E AG

SE E

P

NO

Nifty top tips from our designers and fitters

Refer to page

Look out for the ‘see page’ icon to aid navigation through this document

CO

DE

S

Product codes

UCT OD

EA

TU RE P

R

For quick reference, each page will have a summary of the product codes listed.

Feature products

Stand out products that can create feature within a kitchen design.

54

Porter Handleless Accessories

55

External Corner Post(s)

56

Internal Corner Post(s)

57

L - Shaped Base Feature End Panel

58

C - Shaped Base Feature End Panel

59

C - Shaped Base (Double) Feature End Panel

HANDLELESS RAIL GUIDE | PAGE 53

www.pws.co.uk

F


PORTER HANDLELESS ACCESSORIES

FEATURE

HANDLELESS RAIL GUIDE | PAGE 54

PORTER HANDLELESS ACCESSORIES

The Porter range has been designed to work in unison with the handleless rail system compromising of a complete range of handleless accessories.

INTERNAL CORNER POST

EXTERNAL CORNER POST

Tall wall 895x70x70mm xxxCP30TW

Full height 685x46x46mm xxxECP685

Full height 685x70x70mm xxxCP30B

Half height 325x46x46mm xxxECP325

Half height 325x70x70mm xxxCP30H

C-SHAPED (DOUBLE)

C-SHAPED FEATURE END PANEL Full height 685x960x18mm xxxCEP685X960

Full height 685x650x18mm xxxLEP325X650

FEATURE END PANEL

Half height 325x960x18mm xxxCEP325X960

L-SHAPED FEATURE END PANEL

OD UC T PR

Half height 325x1200x18mm xxxCEP325X1200

Full height 685x1200x18mm xxxCEP685X1200

End panel 2400x650x12mm xxxEP25/12

Half height 325x650x18mm xxxLEP325X650

END PANELS

Base feature end panel 900x650x12mm xxxBEP900/12

12mm

Wall feature end panel 960x370x12mm xxxWEP960/12 Breakfast bar end panel 685x1200x18mm xxxBBEP1200


FEATURE

PORTER HANDLELESS ACCESSORIES EXTERNAL CORNER POSTS

OD UC T PR

TE O

SEE

N

The full height/ half height external corner post works in unison with top and mid rail applications, allowing both rails to turn round an external corner, keeping the linear aesthetic.

The external corner posts are unhanded and come with a pre-assembled packer for ease of fitting.

PA

GE

See pages xx & xx for more information on external corner joints for recessed rails.

HALF HEIGHT EXTERNAL

FULL HEIGHT EXTERNAL

CORNER POSTS

CORNER POSTS

325 x 46 x 18mm

xxxECP325

685 x 46 x 18mm

xxxECP685

INSTALLATION

N

46

TIP

Use scrap material to create an extra 28mm packer to firmly secure the end panel.

TE O

So that the packer isn’t seen in the gap between the frontal and the cabinet, there will be a 4mm gap between the packer and the post.

4mm

46

46

46

P

Cabinet N

TO

To attach the end panel to the cabinet, screw through the inside of the cabinet into the packer attached to the end post.

TE O

The external corner post is supplied with a 28mm packer which comes pre-attached to the post.

HANDLELESS RAIL GUIDE | PAGE 55

PORTER HANDLELESS ACCESSORIES


HANDLELESS RAIL GUIDE | PAGE 56

PORTER HANDLELESS ACCESSORIES FEATURE

PORTER HANDLELESS ACCESSORIES INTERNAL CORNER POSTS

O D UC T PR

SEE

The full hight/ half height internal corner post works in unison with top and mid rail applications, allowing both rails to turn round an internal corner, keeping the linear aesthetic. PA

GE

See pages xx & xx for more information on internal corner joints for recessed rails.

HALF HEIGHT INTERNAL

FULL HEIGHT INTERNAL

CORNER POSTS

CORNER POSTS

325 x 70 x 18mm

xxxCP30H

685 x 70 x 18mm

xxxCP30B

TIP

TE O

Attach packers to the corner post before fitting to the cabinet. once attached, screw through each packer until firmly secured to the corresponding cabinet.

Packers are NOT supplied with the internal corner post.

N

P

TE O

TO

N

TO

INSTALLATION

P

The internal corner post should sit in the 70mm gap between the two corner cabinets. This should leave enough room for two packers to be fitted.

TIP

We recommend using two 70mm packers. One to fix the post to the cabinets and the other to keep the void between the corner cabinets at 70mm.

Cabinet

70

Packer


FEATURE

PORTER HANDLELESS ACCESSORIES L-SHAPE BASE FEATURE END PANEL

OD UC T PR

The L Shape base feature end panel should be used when turning a corner and returning into a wall. Unhanded, the panel can be used for left or right instances and comes pre-assembled with fixing batons for ease of installation. The panel is 650mm in depth, allowing for compatibility with 560 and 580mm deep cabinets, including any scribing that may be required.

L-SHAPE HALF HEIGHT BASE

L-SHAPE BASE FEATURE

FEATURE END PANEL

END PANEL

325 x 650 x 18mm

xxxLEP325X650

685 x 650 x 18mm

xxxLEP685X650

INSTALLATION

N

TE O

TE O

The end panel sits off the edge of the cabinet by 4mm, this is to match the gap created between the frontal and the cabinet.

4mm

The end panels can be used for left and right handed applications.

46

560/580

Material for scribe N

N

The L-shape end panels are pre-fixed with two 28mm packers for ease of installation. To attach the panel, screw through the inside of the cabinet until the screw is firmly secured in the packer on the other side.

TE O

The length of the end panel has been considered for scribing against a wall.

650

50/70

HANDLELESS RAIL GUIDE | PAGE 57

PORTER HANDLELESS ACCESSORIES


FEATURE

PORTER HANDLELESS ACCESSORIES C-SHAPE BASE FEATURE END PANEL

O D UC T PR

The C shape base feature end panel should be used on island applications and is designed for use with 1 x full depth cabinet ( 560mm or 580mm) and 1 x shallow depth cabinet (300 or 340mm) back to back. Unhanded, the panel can be used for left or right instances and comes pre-assembled with fixing batons for ease of installation. N

TE O

The panel is pre-assembled and cannot be cut down. The product has been designed to suit a variety of cabinet depths so please space off cabinetry to suit product dimensions.

C-SHAPE HALF HEIGHT ISLAND

C-SHAPE ISLAND

FEATURE END PANEL

FEATURE END PANEL

325 x 960 x 18mm

xxxCEP325X960

685 x 960 x 18mm

xxxCEP685X960

INSTALLATION 46

The C-shape base feature end panel is prefixed with three 28mm packers for ease of installation. To attach the panel, screw through the inside of the cabinets until the screw is firmly secured in the packer on the other side.

4mm

N

560/580

960

18 TE O

TE O

The end panel sits off the edge of the cabinet by 4mm, this is to match the gap created between the frontal and the cabinet.

300/340

N

HANDLELESS RAIL GUIDE | PAGE 58

PORTER HANDLELESS ACCESSORIES

Using a shallow cabinet with the 960mm end panel will create a gap between the two cabinets.


FEATURE

PORTER HANDLELESS ACCESSORIES C-SHAPE BASE (DOUBLE) FEATURE END PANEL

O D UC T PR

N

The C shape base feature end panel should be used on island applications and is designed for use with 2x full depth cabinet ( 560mm or 580mm) back to back. Unhanded, the panel can be used for left or right instances and comes preassembled with fixing batons for ease of installation. TE O

The panel is pre-assembled and cannot be cut down. The product has been designed to suit a variety of cabinet depths so please space off cabinetry to suit product dimensions.

C-SHAPE HALF HEIGHT

C-SHAPE BASE

(DOUBLE) FEATURE END PANEL

(DOUBLE) FEATURE END PANEL

325 x 1200 x 18mm

xxxCEP325X1200

685 x 1200 x 18mm

xxxCEP685X1200

INSTALLATION The C-shape base (double) feature end panel is pre-fixed with three 28mm packers for ease of installation. To attach the panel, screw through the inside of the cabinets until the screw is firmly secured in the packer on the other side. 4mm

N

560/580

1200

N

560/580

TE O

46 Using two 560 cabinets will create a 40mm gap.

TE O

The end panel sits off the edge of the cabinet by 4mm, this is to match the gap created between the frontal and the cabinet.

HANDLELESS RAIL GUIDE | PAGE 59

PORTER HANDLELESS ACCESSORIES


HANDLELESS RAIL GUIDE | PAGE 60


HANDLELESS RAIL GUIDE | PAGE 61 Porter shown in Gloss White with Aluminium rails, featuring an Alpina Smoked Larch back run.


FLUSH RAIL SYSTEM

HANDLELESS RAIL GUIDE | PAGE 62

1


Introducing: Flushed Rail Systems

64

Introduction to Flush Rails

66

Compatible Door Ranges Specification & Installation

69

Product Range Overview

70

Top Rail Profiles

71

Mid Rail Profiles

73

Wall Cabinets

74

Vertical Profiles - Intermediate

75

Vertical Profiles - Lateral

Key Icons

TO

Below are some handy keys to help you navigate around this document.

P

TIP

Our top tips

TE

Please note

Important bits of information to consider when planning or fitting your kitchen E AG

SE E

P

NO

Nifty top tips from our designers and fitters

Refer to page

Look out for the ‘see page’ icon to aid navigation through this document

CO

DE

S

Product codes

UCT OD

EA

TU RE P

R

For quick reference, each page will have a summary of the product codes listed.

Feature products

Stand out products that can create feature within a kitchen design.

Working With Appliances

76

Ovens

77

Fridges/ Freezers

78

Dishwasher Frame

HANDLELESS RAIL GUIDE | PAGE 63

www.pws.co.uk

F


HANDLELESS RAIL GUIDE | PAGE 64

INTRODUCING FLUSH RAIL SYSTEMS

Chalk (ELC)

Rye (RYE SUFFIX)

PAINT-TO-ORDER (ELX)

The Flush Rail Profile is designed to sit flush to the front of the cabinet. This uses the same cabinet router detail as the Recessed Handleless Rail. It should be planned with doors that feature a reverse chamfer or in conjunction with push to open mechanisms. Available in 2 stocked finishes: Chalk & Rye. Paint-to-order is also offered for these products.


HANDLELESS RAIL GUIDE | PAGE 65 Worktop (shown with Sharks Nose edge profile)

Flush Rail Profile

Ellerton Door

PRODUCT INFORMATION

STOCK FINISHES

Chalk

COMPATIBLE DOOR RANGES

Ellerton

PAINT-TO-ORDER (ELX)

^

Ellerton Doors and Flush Rails shown in chalk.


HANDLELESS RAIL GUIDE | PAGE 66

COMPATIBLE DOOR RANGES Ellerton doors shown in Chalk, featuring Rye flush rails.

ELLERTON

6Year

GUARANTEE

Stocked Range

Handleless Rail Sizes

Painted Finish

Paint-to-Order Service

Door Drilling Service 2 working days

6 Year Guarantee

PRODUCT INFORMATION

Ellerton’s delicate centre panel and narrow frame provide a contemporary take on the traditional shaker. We’ve softened the popular handleless look with a choice of contrasting oak and painted flush-fitted rail trims. Ellerton’s smooth matt painted finish and subtle reverse chamfer detail help to define the overall refine feel.

PRODUCT OVERVIEW DOOR STYLE

Handleless Shaker

DOOR THICKNESS

18mm (shallow centre panel)

SPECIFICATION

HDF with melamine reverse

FINISH­­­

Smooth matt painted (Primed door unfinished, ready to paint)

REVERSE

Matching matt melamine reverse

CERTIFICATION

Fira Gold

PRICE BAND

Chalk (ELC)

DOOR FINISH CHALK

£ £ £

BOARD MATCH Egger W980 Kronospan K101


HANDLELESS RAIL GUIDE | PAGE 67 Ellerton doors and Flush Rails shown in Chalk.


HANDLELESS RAIL GUIDE | PAGE 68

Specification & Installation This section will talk you through the Flush Rail product offering and recommended installation methods for each rail profile.


PRODUCT RANGE OVERVIEW CO

The Flush Rail Profile is designed to sit flush to the front of the cabinet. This uses the same cabinet router detail as the Recessed Handleless Rail.

DE

Chalk (ELC)

S

Rye (RYE SUFFIX)

PAINT-TO-ORDER (ELX)

Use the following pre-fix codes for the relevant stock finish, in place ***

C

D

A

B

Ellerton shown in Silver Grey. With Silver Grey Flush Rails.

TOP rail profile

MID rail profile

A

VERTICAL rail profiles

C

B

D

Code

Description

Code

Description

Code

Description

Code

Description

***TP3000

Flush horizontal trim TOP profile for base units. For use with chamfer door 3000x57x26.5mm

***MP3000

Flush horizontal trim MID profile for base units. For use with chamfer door 3000x57x26.5mm

***VPI3000

Vertical trim profile INTERMEDIATE 3000x71x41mm

***VPL3000

Vertical trim profile LATERAL 3000x53x41mm

***TP3000RYE

Flush horizontal trim TOP profile for base units. For use with chamfer door 3000x57x26.5mm

***MP3000RYE

Flush horizontal trim MID profile for base units. For use with chamfer door 3000x57x26.5mm

***VPI3000RYE

Vertical trim profile INTERMEDIATE 3000x71x41mm

***VPL3000RYE

Vertical trim profile LATERAL 3000x53x41mm

HANDLELESS RAIL GUIDE | PAGE 69

FLUSH RAILS


HANDLELESS RAIL GUIDE | PAGE 70

SPECIFICATION & INSTALLATION

Installing TOP rail profiles When using a standard base unit, the top panel and gables of the cabinet need to be modified from standard cabinet construction. We recommend using L-shaped corner brackets to install rail profiles.

Description

***TP3000

Flush horizontal trim TOP profile for base units. For use with chamfer door 3000x72x26.5mm

ELC3000RYE

Flush horizontal trim TOP profile for base units. For use with chamfer door 3000x57x26.5mm (rye finish)

PAINT-TO-ORDER (ELX) CO

Code

D

Chalk (ELC)

Rye (RYE SUFFIX)

ES

Use the following pre-fix codes for the relevant stock finish, in place ***

Flush Rail Profile

Routering Cabinet Detail Worktop (Shown with Sharks Nose edge profile)

Both gables of the cabinet need to routered (details of this is shown below). We suggest using a 10mm router cutter in order to achieve the 5mm internal radius required. Set cabinet top panel back by 27mm

34

27

Ellerton Door 57

57.5

R5

R5

26.5

Door size: 684.5

Router detail on 18mm cabinet gable

Cabinet size: 720

Rail Installation Cabinet Gable Top Flush Rail

Illustration showing over-all cabinet dimensions

L-Shaped Bracket


Installing MID rail profiles When using a standard base unit, the top panel and gables of the cabinet need to be modified from standard cabinet construction. We recommend using L-shaped corner brackets to install rail profiles.

Description

***MP3000

Flush horizontal trim MID profile for base units. For use with chamfer door - 3000x57x26.5mm

ELC3000RYE

Flush horizontal trim MID profile for base units. For use with chamfer door - 3000x57x26.5mm (rye finish)

PAINT-TO-ORDER (ELX) CO

Code

D

Routering Cabinet Detail

57.5 188

34

73

Rye (RYE SUFFIX)

Use the following pre-fix codes for the relevant stock finish, in place ***

34

160

Chalk (ELC)

ES

Both gables of the cabinet need to routered (details of this is shown below). We suggest using a 10mm router cutter in order to achieve the 5mm internal radius required. 27

720 R5

R5

490

Configuration 1 Illustration showing over-all cabinet dimensions

73

72

R5

Router detail on 18mm cabinet gable

R5

26.5

TO

34

PT

Router detail on 18mm cabinet gable

57.5

IP

160

Rail Installation 281

For a 2 drawer replace 160mm drawer frontal for 325mm drawer fronts.

160

34

Mid Flush Rail

720

73 Cabinet Gable

Configuration 2

325

Illustration showing over-all cabinet dimensions

Router detail on 18mm cabinet gable

L-Shaped Bracket

HANDLELESS RAIL GUIDE | PAGE 71

SPECIFICATION & INSTALLATION


HANDLELESS RAIL GUIDE | PAGE 72

Ellerton shown in Silver Grey. With Silver Grey Flush Rails.


Installing wall cabinets

P

TIP

Use light pelmet to give the impression of a flush rail on wall units (as featured in image, left).

Scenario 1 - Flush

Technical Requirements Scenario 1 illustrates the flush look you can achieve when you align Ellertons chamfered handle with the bottom of the wall cabinet. g

Fi

1 Frontal

Cabinet

Door flush with cabinet TO

TO

There is no specific rail profile for wall units. Unlike the recessed rail profiles, there is no requirement to modify the base panel of the cabinet when using the flush rail system and should be treated as standard lay-on doors.

Fig 1

Scenario 2 - Overhang

P

TIP

If lighting pelmet is required, it must be set back behind the frontal.

Technical Requirements Scenario 2 shows that by overhanging the frontal by approximately 20mm, the Ellerton door will allow for enough purchase on the chamfered edge. g

Fi

2 Cabinet

Door overhangs cabinet

Fig 2

Frontal

20mm

HANDLELESS RAIL GUIDE | PAGE 73

SPECIFICATION & INSTALLATION


HANDLELESS RAIL GUIDE | PAGE 74

SPECIFICATION & INSTALLATION

Installing vertical profiles - INTERMEDIATE CO

PAINT-TO-ORDER (ELX) DE

Chalk (ELC)

Rye (RYE SUFFIX)

S

Use the following pre-fix codes for the relevant stock finish, in place ***

Both the vertical intermediate rail profile and vertical lateral rail profile should be installed using the same basic principles and tools. Simply locate the profile into the position and screw through the cabinet gable and into the rail profile to secure in place. Code

Description

***VPI3000

Vertical trim profile INTERMEDIATE 3000x53x41mm

ELC3000RYE

Vertical trim profile INTERMEDIATE 3000x53x41mm (Rye finish)

Technical Requirements 65

Cabinet gable

35

35

65

Fig 2

41

Fig 2

20

71

Frontal

Frontal

Rail Installation 35mm spacer

N

65mm spacer

65mm spacer

TE O

TO

35m spacers required between cabinets.

PT

IP

It is not necessary to modify the top or bottom panel of the cabinet.

Image shows Flush Rails in Rye finish.


HANDLELESS RAIL GUIDE | PAGE 75

SPECIFICATION & INSTALLATION

Installing vertical profiles - LATERAL CO

PAINT-TO-ORDER (ELX) DE

Description

***VPL3000

Vertical trim profile LATERAL 3000x53x41mm

ELC3000RYE

Vertical trim profile LATERAL 3000x53x41mm (Rye finish)

Rye (RYE SUFFIX)

S

Use the following pre-fix codes for the relevant stock finish, in place ***

When planning larder units and appliance housings, the cabinet gables need to be set back by 20mm, allowing the vertical rail profiles to sit flush to the front of the cabinet.

Code

Chalk (ELC)

Technical Requirements End panel

35

Cabinet gable

65

35

65

Fig 1

41 20

Fig 1

Fig 1

20 53

Feature post

Frontal

Rail Installation 35mm spacer

N

65mm spacer

65mm spacer

TE O

TO

35m spacers required between cabinets.

PT

IP

For a high quality finish, we recommend hiding the screws behind the hinge plates where the screws will not be visible.

Image shows Flush Rails in Rye finish.


UNDERMOUNT OVENS Integrated ovens and microwaves can be utilised to make the most of undercounter space, however, some details will need to be taken into consideration when planning around the handles rail system.

Undermount Oven SCENARIO 1 Scenario 1 shows the rails terminated on each side of the appliance. A filler is fixed below the oven to fill the left over void.

Filler

Filler (with profile)

Undermount Oven SCENARIO 2 To continue the top rail profile across a run of units, with an undermount oven, a small filler is required at the top and bottom of the appliance.

TO

HANDLELESS RAIL GUIDE | PAGE 76

WORKING WITH APPLIANCES

PT

IP

Make sure to use the top profile of an Ellerton door to line through with the adjacent frontals. Filler

FREE STANDING OVENS In scenarios where a free standing oven terminates the run of the flush rails, we recommend running the rails into an end panel either side of the oven. This will hide any of the rails cut edges, creating a cleaner execution.

18mm End Panel

18mm End Panel


UNDERMOUNT FRIDGES & FREEZERS N

Undermount fridges & freezers can be a useful appliance in smaller spaces which might not have the room for full height appliances. TE O

When incorporating an undermount fridge or freezer into your handleless design, take note of the top rail position. If possible, adjust the appliances legs to allow the door to swing from under the top rail.

Ellerton shown in White with Rye Flush Rails.

APPLIANCE HOUSING FRIDGES & FREEZERS If the appliance does not permit, we recommend incorporating the appliance into a housing and using with the Vertical Rail Profiles and a 715mm door. (with vertical chamfer)

Ellerton shown in White with Rye Flush Rails.

We have a selection of Vertical Chamfered Doors: - 715x397mm, vertical chamfer (**714VH) - 1245x397mm, vertical chamfer (**124VH) - 283x597mm, vertical chamfer (**286VH) - 355x597mm, vertical chamfer (**356VH)

HANDLELESS RAIL GUIDE | PAGE 77

WORKING WITH APPLIANCES


FEATURE

Planning with a Dishwasher Frame

O D UC T PR

The Dishwasher Frame is designed for use with dishwashers on handleless kitchen designs where the continuation of the drawer pack is required across the dishwasher. The frame is machined to accept the mid profile, for both recessed and flush rails, which is not supplied and should be ordered with the rest of the kitchen.

NO

HANDLELESS RAIL GUIDE | PAGE 78

WORKING WITH APPLIANCES

Code

Description

GPDDWF

Drawer line dishwasher frame, stainless steel finish, for use with mid rail profile

TE

Dishwasher frame is 28mm thick

N

The Dishwasher Frame is 28mm thick. It is therefore required to pull all adjacent cabinets forward by 28mm to align frontals and rails. The Dishwasher Frame accommodates for 2 x 325mm drawer frontals. The top drawer frontal will overhang the top of the dishwasher frame to allow for purchase with the above handleless rail.

28mm

a.

Adjacent cabinets pulled forward 28mm to accept Dishwasher Frame thickness

Top Rail

325 x 597mm frontal (xx326)

Mid Rail

325 x 597mm frontal (xx326)

b. 28mm Dishwasher Frame (GPDDWF)

a.

To accommodate the thickness of the dishwasher frame, adjacent cabinets will need to be pulled forward by 28mm to align frontals and rails.

b.

In order to accommodate the swing of the frame, the plinth below the dishwasher requires to be notched.

TE O

PLANNING WITH A DISHWASHER FRAME


INSTALLATION OF DISHWASHER FRAME

01.

Start by installing the mid rail to the Dishwasher Frame. The Mid Rail sits inside the machined void. Next, attach the frontals by screwing through the rear of the frame using the pre-drilled fixing holes.

02 .

Fix Dishwasher Frame (with frontals and mid rail attached) to the Dishwasher door. Use the pre-drilled fixing holes on the dishwasher door to locate fixing points.

INSTALLATION OF GOLLINUCCI PULL-OUT WASTE BIN DID YOU KNOW? To maintain a strong, linear look, the Dishwasher Frame (GPDDWF) can also be used with internal pull-out waste bins. We recommend using 580-GY Gollinucci Bins. The bins all come with fitting instructions. These should be referred to when constructing the product prior to installation onto the Dishwasher Frame system.

28mm

Remember to pull forward adjacent cabinets by 28mm to accommodate the Dishwasher Frame thickness, and make use of Mid Rail End Caps for a high quality installation. TO

P

Cabinet Gable

TIP

Dishwasher Frame (GPDDWF)

Pull-Out Waste Bin (580-GY recommended)

1

Screw attachment bracket onto the Dishwasher Frame using 3 x fixing points and adjust as required.

2

Using L-Shaped brackets, fix top frame of the Pull-Out Bin to Dishwasher Frame.

Please refer to fitting instructions provided with bin for a detailed installation guide.

112 Attachment Bracket 32

191

HANDLELESS RAIL GUIDE | PAGE 79

WORKING WITH APPLIANCES


HANDLELESS RAIL GUIDE | PAGE 80


HANDLELESS RAIL GUIDE | PAGE 81 Ellerton frontals & rails shown in Chalk.


HANDLELESS RAIL GUIDE | PAGE 82

KITCHEN FASCIA MATRIX FOR HANDLELESS RAIL SIZES This matrix can be referred to when planning Ellerton, Porter & Porter PtO. Availability varies between ranges. Please see relevant door range pages earlier in the Directory for full range content

APPLIANCE HOUSING DOORS Ellerton doors include doors with in appliance and and larder applications.


HANDLELESS RAIL GUIDE | PAGE 83

Reclaimed Oak with Aluminium rails.


HANDLELESS RAIL GUIDE | PAGE 84

HANDLELESS APPLIANCE HOUSING MATRIX PORTER & HUNTON Please use this document as a one page guide to understand the product availabilty in the Porter and Hunton ranges, when planning built in appliance housings in a handleless design. The majority of these appliance configurations eradicate the need for fiilers and are based on the industry standard; aligning with the majority of appliance brands. The sizes in the matrix below are inclusive of sizes available in Porter and Hunton from the lay-on ranges, to offer a wider breadth of options. Please Note - Tomba and Ellerton ranges include vertical handle profiles and range content differs from the below. Please refer to the the Price List for full range availability. Aperture sizes are shown adjacent to the appliance type, with the actual appliance size shown beneath, in italics.

645

Medium Height Installation (cabinet heigh of 1970mm)

1970mm Cabinet

645

645

645

600 (595)

2 X COMPACT CONFIGURATION

570

355 355

139 283

175 175

645

283

175 175

490

450

filler

600 (595) 570

283 283

645

645

645

645

139

450

283

160 355

283

645

COMPACT APPLIANCE CONFIGURATIONS

645

645

460 (455)

645

645

645

139

139 139

283

570

570

645

645

645

139

139 139

283

283

283

139 175 175

283

283

175 175

460 (455)

140 139 715 355

570

355 355

139 283

175 175

283

175 175

290 283

715

570

355

283

2150mm Cabinet

715

715

139

175

895

685

685

645

139

139

175

645 895

600 (595)

355 685

645

645

715

175 355

685

685

139

139

140

139 355

355

570

283

715

715

685

283

2 X COMPACT CONFIGURATIONS

DOUBLE OVEN CONFIGURATIONS

570

Tall Height Installation (cabinet heigh of 2150mm)

685

600 (595)

715 355

355

SINGLE OVEN AND WARMING DRAWER CONFIGURATIONS

SINGLE OVEN CONFIGURATIONS

Tall Height Installation (cabinet heigh of 2150mm)

450

645

140

COMPACT AND WARMING DRAWER CONFIGURATIONS

685

460 (455)

645

600 (595)

715

460 (455)

645

460 (455)

139

1970mm Cabinet

645

SINGLE OVEN AND COMPACT CONFIGURATIONS

SINGLE OVEN AND WARMING DRAWER CONFIGURATIONS

SINGLE OVEN CONFIGURATIONS

715

715

715

645

460 (455)

2150mm 900 Cabinet (890) 139 175 355

460 (455) 175 355

175 175 175

filler

490

filler

570


450

SINGLE OVEN AND MICROWAVE CONFIGURATIONS

490

filler

460 (455)

460 (455)

600 (595)

600 (595)

283

filler

filler

450

490

COMPACT AND WARMING DRAWER CONFIGURATION

645

450

325

645

355

355

SINGLE OVEN, COMPACT AND WARMING DRAWER CONFIGURATIONS

SINGLE OVEN AND COMPACT CONFIGURATIONS

645

490

685

filler

460 (455)

600 (595)

115 355

325

895

685

685

2150mm Cabinet

175 450

283

645

685

600 (595)

140 115

715

400

139

139

139

283

325

355

175

685

645

139 175

filler

645

715

139 175 175 355

Tall Height Installation (cabinet heigh of 2150mm)

COMPACT AND APPLIANCE CONFIGURATIONS

645

645

895

460 (455) 139 139

175 175

Medium Height Installation (cabinet heigh of 1970mm)

715

filler

460 (455) 140

715

Medium Height Installation (cabinet heigh of 1970mm)

SINGLE OVEN AND MICROWAVE CONFIGURATIONS

570

COMPACT AND WARMING DRAWER CONFIGURATION

715

355

460 (455)

600 (595)

450

355

283

1970mm Cabinet 355

139

715

645

355

460 (455)

570

139

139

355

140

715

715

1970mm Cabinet

160

600 (595)

490

645

SINGLE OVEN CONFIGURATION

645

460 (455)

450

DOUBLE OVEN CONFIGURATIONS

900 (890)

140

645

HANDLELESS RAIL GUIDE | PAGE 85

SINGLE OVEN, COMPACT AND WARMING DRAWER CONFIGURATIONS

175 175 715

175 175 175 355

139

139 139

645

685

2150mm Cabinet

Tall Height Installation (cabinet heigh of 2150mm)


VERSION 1 - FEBRUARY 2020


Station Road, Aycliffe Business Park, Newton Aycliffe, Co. Durham, DL5 6EQ

Profile for PWS Distributors Ltd

Handleless Rail Guide  

A comprehensive guide to designing and installing kitchens featuring our handleless rail collection.

Handleless Rail Guide  

A comprehensive guide to designing and installing kitchens featuring our handleless rail collection.