OPTIONS Neutral gases injected during crumbling
Antioxidant injection
It is possible to inject a neutral gas (nitrogen or CO2) during crumbling in order to obtain optimal protection against must oxidation. INGAS supplement.
This system, controlled by the press PLC, allows the spraying of anti-oxidants directly on the pomace.
Flowmeter Juice selector and conductivity probe It lets the operator direct the must towards one of two channels according to criteria defined by the winemaker: phases of the pressing cycle, elapsed time, conductivity. The conductivity probe at the outlet of the juice tank makes it possible to set up a qualitative selection of juices according to the conductivity of the run-off.
The electromagnetic flowmeter allows a precise selection of juices in each compartment of the vat according to the flow. This allows an automatic and qualitative operation of the pressing with our Optimal mode. Description of the option:
• Regulation of the pressing cycle according to the flow
of juices controlled by an electromagnetic flow meter
• Automatic selection of additional stages at the end of the pressing
• Calculation of the number of rotations according to the run-off volume
• Obtaining the desired result with a minimum additional presses
POMACE EMPTYING
62
Emptying directly into tipper truck skips placed below the press
Emptying directly into tipper truck skips placed below the press
Emptying directly into tipper truck skips placed below the press
Pomace removed by screw conveyor with bearing system and chute for filling tipper truck skips - pneumatic control of chutes and hatches.
SPC 240-600 SMART PRESS PRESSING