PEEK
Productcharacteristics
Exellentdimensionalstability
Flameretardentandself-extinguishing
Verylowsmokedesity
Productapplications
Medicalengineering
Aviationindustry
Electricalindustry
Materialdataiscollectedingoodfaithfromoursuppliers,alternativelyfromrawmaterialmanufacturers,andmaydifferdependingonthetest methodused.Toensuretherespectivevalue.NordicPlasticsGroupdisclaimsallresponsibilityinconnectionwiththeuseofthedata
Nordic Polytech Group, Omvägen 17, SE-231 61 Trelleborg, Sweden. Tel +46 (0)10-707 80 00 www.npgroup.se Version:2022
General properties Test method UnitValue Density DIN EN ISO 1183-1 g/cm³1,31 Waterabsorption DIN EN ISO 62 %0,2 Flammability(thickness3mm/ 6mm) UL 94 V0/V0 Mechanical properties Test method UnitValue Yieldstress DIN EN ISO 527 MPa110 Elongation at break DIN EN ISO 527 %20 Tensilemodulus of elasticity DIN EN ISO 527 MPa4000 Shorehardness DIN EN ISO 868 scaleD88 Thermal properties Test method UnitValue Meltingtemperature ISO 11357-3 °C343 Thermal conductivity DIN 52612-1 W /(m • K)0,25 Thermal capacity DIN 52612 kJ/(kg• K)1,34 Coefficent of linearthermal expansionDIN 53752 10¯⁶/k50 Service temperature, long term Average °C-60 …250 Service temperature, shortterm (max.)Average °C310 Heat deflection temperature DIN EN ISO 75, Verf. A, HTD°C152 Electrical properties Test method UnitValue Dielectricconstant IEC 60250 -3,2 Dielectricdissipation factor(50Hz) IEC 60250 -0,001 Volume resistivity DIN EN 62631-3-1 Ω * cm 4,9*1016 Surface resistivity DIN EN 62631-3-2 Ω 1018 Dielectricstrenght IEC 60243 kV/mm20