MAXIPOWERTM COGGED BANDED BELTS
Sure-Set® Belts marked Sure-Set are produced to Sure-Set tolerances Sure-Set indicates that all belts of a given size and style are matched. Contact Elgin for special matching requirements.
Belt Sizes and Dimensions Note The following sizes of 3VX and 5VX per sections are available In 2/3/4 and 5 belts per band. Size designation and dimension for banded belts is the same as Maxipower except that the required number of belts per band is shown preceding size designation. Contact Elgin for other sizes and availability. Stock items subject to change Without notice
3VX
Maxipower Cogged Banded V-belts are cut from a vulcanized sleeve into a unitized belt set. The individual V's are spaced to permit operation in MPTA standard groove 3Vand 5V sheaves. They have been engineered for difficult applications where small sheaves, lateral vibration and heavy shocks often cause individual belts to whip or turnover. You can use sheaves as small as 2.2" in diameter. The unique notched construction distributes bending stress uniformly-and also provides superior heat dissipation. Maxipower Banded belts are oil and heat resistant and static conducting: *
5VX
3VX450 3VX475 3VX500 3VX530 3VX560
3VX800 3VX850 3VX900 3VX950 3VX1000
5VX600 5VX630 5VX670 5VX710 5VX750
3VX600 3VX630 3VX670 3VX710 3VX750
3VX1060 3VX1120 3VX1180
5VX800 5VX850 5VX900 5VX950 5VX1000 5VX1060 5VX1120 5VX1180
Note: For belt size or band configuration not shown, contact Elgin for availability. On drives requiring more than five belts per band, use table on page 11 to select band combinations.
POWERPLUSTM MAXIBAND™ BELTS
Belt Sizes and Dimensions Note The following sizes of 5VK and 8VK are available as special order. They can be produced in any fib combination required. All are non-stock. Contact Elgin for availability.
5VK
PowerPlus Maxiband belts are designed for high horse power, high tension and severe shock load applications such as dredge pumps, hammermil/s, piledrivers, and steel billet grinders. This belt delivers as much as 50% more horsepower than ordinary belt setups. Super tough kevlar cords with maximum internal adhesion have far more heat resistance and far less stretch than other cords. The cover is rugged, woven 2-ply, specially processed for maximum adhesion, and to protect the carcass from abrasion, heat, oil, and to prevent static buildup. A premium chloroprene rubber cushion section resists compression, heat, oil and fatigue. This keeps the belt flexing smoothly and easily as it passes over the sheaves. An oil resistant insulation section transfers the belt load to the kevlar cords. **For explanation ot static conductiVity and conditions. reter 10 Installation and Maintenance Catalog.
12
www.eMurdock.com 800-426-5273
8VK
5VK500 5VK530 5VK560 5VK600 5VK630
5VK1320 5VK1400 5VK1500 5VK1600 5VK1700
8VK1250 8VK1320 8VK1400 8VK1500 8VK1600
8VK3000 8VK3150 8VK3350 8VK3550 8VK3750
5VK670 5VK710 5VK750 5VK800 5VK850
5VK1800 5VK1900 5VK2000 5VK2120 5VK2240
8VK1700 8VK1800 8VK1900 8VK2000 8VK2120
8VK4000 8VK4250 8VK4500 8VK4750 8VK5000
5VK900 5VK950 5VK1000 5VK1060 5VK1120
5VK2360 5VK2500 5VK2650 5VK2800 5VK3000
8VK2240 8VK2360 8VK2500 8VK2650 8VK2800
8VK5600 8VK6000 8VK6600
5VK1180 5VK1250
5VK3150 5VK3350 5VK3550
WARNING
Because the high strength of PowerPlus Maxiband Belts provide excep
tionally high torque capacities and horsepower ratings which may exceed
standard sheave capabilities, the sheaves selected must be checked for
adequacy. Sheaves, bushings or other drive components could be
destroyed in overload with potential personal harm and/or equipment
damages. Consult the sheave manufacturer.
NOTE
If belts are used in sets, specify the number per set for factory matching.
....