HYDRAULIC LAYOUT – GRAVITY DOWN (Built from 12-09)
REVISED: E.O. REV.
LIFT CORP. EM
3-1-11 6469 03
PM-789 ITEM 1 A B C D
PART NUMBER 70430550 70400001 B 7043001-1 A,B 10098425 B 10099309 B
QTY 1 1 1 1 1
E F G H
75089854 B 75089833 A,B 70092503 B 70400004 B
1 1 1 1
DESCRIPTION Hydraulic Pump Unit Hydraulic Reservoir Motor Ground Cable Inline Fuse Assembly (Includes Fuse 75089853) Fuse Starter Solenoid Valve Assembly, 2-way, 2 pos w/ Coil Breather
J K L 2 3 4 5 6 7 8 9 10 11 12
70091291 B 75089834 A,B 70402303 B 26480010 7010001-19 26299500 75082741 75083201 75086732 75083044 75082881 75085000 43012382 75089300
1 1 1 1 1 1 1 1 1 1 1 1 1 2
Steel Plug Bus Bar Coil, 10V, 25W Hydraulic Cylinder Flow Valve, 2.75 GPM Hose, 1/4” I.D. Barbed Fitting, 1/8” NPTF x 1/4” Straight Hose, 1/4”I.D. x 7/16”-20 JIC x 57” Long Round Head Screw, 10-32x1” Hose Clamp, 1/2” Hose Clamp, 3/8” Locknut, 10-32 Hose Sleeve Wire Tie, 8”
A B
Included in Motor Assembly 70400854. Included in Pump Assembly 70430550. A Pressure Compensative Flow Control Valve must be installed at the cylinder as shown. Valve must be orientated so arrow is pointing away from cylinder.
© 2009 Waltco Lift Corp. All rights reserved