9 Specifications

Specifications

9.1 Z28 SPECIFICATION

Specification Name Specification Energizer Output Voltage 8.5kV peak no load Peak Output Energy 4 Joules at 500 Ohms Pulse Rate Locked at 0.9 Hz 12Vdc Power Consumption Energizer on – 1005mA average, 1220mA peak Energizer off – 28mA (40mA with keypad) Not including keypad or auxiliary power

AC Power Input Battery Charger Output

L1+, L2+ and Siren Outputs 16-18Vac Float voltage 14V, 700mA, short circuit and reverse polarity protection utilising 3A slow SMD fuses. Self-resetting fuse protection, switched 12V, rated at 30W (combined)

Enclosure

IP4x ABS plastic Size 300mm high, 190mm wide, 115mm deep Weight – packed, no battery 2.5kg

• There are no user-serviceable parts in this unit. • The installer is reminded that high voltages are retained for a while after switching off, and to wait for at least 10 minutes before opening the case.

• Before working on the high voltage wiring of an electric fence, it is recommended that the energizer be turned off and an intentional short circuit be placed from the fence live wires to earth. • Electric fences are not toys; do not let children play with them. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.