The Winstore X3 provides Kitchens R Us with automatic board selection and handling and allowed a second CNC line to operate in limited factory space.
Winstore X3 optimising the storing and retrieval of board An increasing workload for Tauranga based Kitchens R Us who manufacturer kitchens, wardrobes, storage cabinetry and commercial shop fit-outs, meant the company needed to introduce a second manufacturing line into their busy business. A lack of space to do this saw them look seriously at how they were running board through their factory. The end result was the first Biesse Winstore X3 in New Zealand, a board storage and retrieval system which resolved the factories space issues while taking the heavy lifting out of board handling. “We had been very busy for some time,” says Kitchens R Us owner Russell Reardon. “Our current CNC was maxed out but we didn’t really have the factory space to easily add a second one, so we needed to work out how we could condense the use of the factory space we had, to accommodate a second CNC. “I had been looking at what robotics can do in joinery applications and had seen a Biesse Winstore in operation in the US on a trip there three years ago. I had been impressed at the way the storage system condensed board storage while taking out the
people. We were already running a Biesse CNC and looking to purchase a Biesse Rover S for our second line so the Winstore X3 looked a good fit to feed them both. “The results have been impressive it basically works all day and all night storing and sorting board into job-lots. When we bring in new board it is left in the loading bay and the Winstore starts loading it into storage. It can prioritise its work so that if a machine needs loading it will leave storing board and service the machine before going back to its previous task.
JOINERS Magazine June 2022 page 62
“It knows exactly where it has stored each board and when provided with a jobs details it goes and gets the required sheets. We carry around 15,000 sheets of board in a variety of colours. We have about 13 stacks and each stack can have different colours. Winstore know where it has stacked each board, so if a required board is in stack 6 and 10 boards down it will go and get it by reshuffling the stack. “The secret is the Winstore X3 and the CNC’s talk to each other. We have always used Cabinet Vision which is very compatible with the onboard Biesse software and
we have invested in Stack Easy which is an additional package developed in Australia specifically for the Winstore, which helps configure the best option at any one time. Together they work brilliantly to retrieve board for each job ready for both CNC’s in order of our job runs. “This is the first Winstore X3 to be installed in New Zealand so we were a little nervous about the install and commission but it basically went seamlessly. Everybody stuck to prices and quoted time lines, Biesse provided details of our requirements and drew up plans and guidelines to