3RD EDITION ADR REFERENCE GUIDE The following pages are a guide to mounting HELLA lamps in compliance with the Australian Design Rules (ADR). The diagrams in this section are intended as a general guide only, for exact mounting specifications please refer to ADR 13/00. Compliance
ghts™ Kit LED Safety DayLi - Easy-Fit
designed to signal lamps, Forward facing fronts, or vehicles with flat be mounted on an Easy-Fit The lamps are on motorbikes. parts. requiring no extra installation, usually the bracket is complete and Once the wiring into place clips lamp easily is fitted, the LED is complete. and installation
ADR
Compliance
5636-BL (Blister
Part Number
24 VOLT
al mounting.
Suitable for horizont 2W
Protection
Cable Length Spare Parts
protection. water immersion) ) Reverse polarity and temporary /steam jet cleaning on against dust IP 6K7 (Protecti and high pressure on against dust IP 6K9K (Protecti d multi-core cable. 2.5m of sheathe Pre-wired with Single lamp 12V 1013 Single lamp 24V V 1013-24 High impact acrylic.
Lens Material
ADR 76/00
Compliance
ECE R87/01 ™
DayLights 2 x LED Safety 2 x Mounting brackets relay 1 x Changeover sheet 1 x Instruction
Kit Contents
P/N 5636-BL
pack)
5636-24V
ption
Power Consum
A quick reference
COMPLIANCE
12 VOLT
5636
Mounting
COMPLIANCE
ADR
Mounted perpendicular to the vehicle axis
33
150 27
1. Find the product that fulfils your illumination requirement.
2. Check for the ADR symbol next to the part number to ensure it's compliance.
3. Look up the part number on the chart on page 340 for complete ADR information.
Simpler ADR Compliance The 3rd edition ADR covers all vehicles and trailers, even those not subject to registration requirements such as very light trailers or ‘box’ trailers.
of Evidence (SE) submission to the Federal Office of Road Safety (FORS). This submission covers all HELLA products that comply with 3rd Edition ADRs.
To simplify the ADR approval process for smaller manufacturers and individual home-builders, HELLA has made a consolidated Summary
This catalogue lists both the HELLA and FORS Component Registration Numbers (CRN) beside each item in a quick reference ADR application
chart in this section (page 340). HELLA provides specific ADR related lamp orientation and mounting requirements to enable customers requiring ADR compliance to simply quote the relevant CRN to the authorities (who maintain a central register), rather than undertake detailed SE submissions for each lamp function.
See page 83 for
front position relay
option.
REAR
FRONT
1
ADR 49/00
Rear End Outline Lamps
11 ADR 49/00
2
ADR 48/00
Number Plate Lamps
12 ADR 45/01
Cab Markers (optional)
3
ADR 6/00: Cat.2
Rear Direction Indicators
13 ADR 6/00: Cat.1
Front Direction Indicators
4
ADR 49/00
Rear Position Lamps
14 ADR 50/00
Front Fog Lamps (optional)
5
ADR 49/00
Stop Lamps
15 ADR 46/00
Headlamps
6
ADR 47/00
Rear Retro Reflectors
16 ADR 49/00
Front Position Lamps
7
ADR 1/00
Reversing Lamps
17 ADR 47/00
Front Retro Reflectors
18 ADR 76/00
Daytime Running Lamps (optional)
SIDE 8
ADR 47/00
9
ADR 45/01 or 74/00 Side Markers
Front End Outline Lamps
Side Retro Reflectors
10 ADR 6/00
Supplementary Side Direction Indicators 10
SMALL TRUCK
8
9
8
8
9
1 12 11 11 Optional position 15,16 13 17 14,18
10
8
336
9
8
1 www.hella.co.nz
8
9
techfeedback@hella.co.nz
2 3,4,5,6,7 Combined or single lamps 6 2 Optional position