Laser Tools - Bush & Suspension SHOCK ABSORBER & MACPHERSON STRUT TOOL KIT -- 15PC
MACPHERSON STRUT EXPANDER TOOL SET
MACPHERSON CLAMP SEPARATOR SET
• Specifically designed for repairing and replacing shock absorbers including dismantling MacPherson struts • Contents: 7 x Go Thru’ deep sockets: 16, 17, 18, 19, 21, 22, 24mm, 4 x 1/2"D Hex bits: 5, 6, 7, 8mm, 1 x sliding T-bar 1/2"D, 2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D • Supplied with 1 x 21mm Hex Go Thru’ 60 tooth ratchet. • Applications include: Vauxhall, Opel, BMW, Mercedes-Benz, Peugeot, Citroën and VAG • Manufactured from Chrome Vanadium.
• Designed to quickly and easily expand Macpherson struts to their full extension and hold them in their extended position whilst new road springs are fitted. • Useful when working with struts that are equipped with strong internal springs (tension stop springs) that pulls the strut shaft partly into the strut • Clamp for Strut inserts available separately Part No 5791 (35mm bolts), 6270 (60mm bolts)
• Separator bits: 7.5 to 9.0mm, 5.2 to 6.9mm, 6.6 to 7.9mm, 4.3 to 6.0mm, 12.7 to 16.7mm • Includes 3/8" square drive handle with bit holder • Fast and efficient, holds the clamp open for removal and fitting of the Macpherson strut and hubs • Applications include Citroën, Peugeot, Ford, VAG, Audi where Macpherson struts are clamped into the hub • Kit includes a 17mm combination ratchet wrench
7360
NEW
ONLY
£109.95 CLAMP FOR STRUT INSERT PISTONS 60MM BOLTS • Designed to lock a McPherson Strut in its fully extended position when changing the springs • Particularly useful when working with struts that are equipped with strong internal springs (tension stop springs) that pull the strut shaft partly into the strut. • Locks the Mcpherson strut in its fully extended position • Kit includes 60mm long bolts (68mm including head)
ONLY
5790
ONLY
£129.95 SUSPENSION COIL SPRING COMPRESSOR - HEAVY DUTY • Hand held Suspension spring compressor with twin threaded rams • Adjustable jaws to suit coil diameters up to 240mm • Jaw capacity 23mm-280mm. Maximum spring load 1200Kg • Equipped with safety clamps • Supplied in a blow moulded case
£12.95 TOP SUSPENSION MOUNT TOOL 3PC - VAG • Includes a uniquely shaped extension bar which eliminates the spring restriction and attaches to a double sided socket • Designed to remove the fixing underneath the mount where the access is poor. OEM fixings can either be 6 or 8 sided nuts which is why the tool includes a double sided socket • 14mm Bi Hex socket with 1/4"D offset for later VAG models from 2016, 3/8"D x 81mm angled extension bar. • Laser 6799 suitable for older VAG models >2015 • EU registered design
7072
ONLY
£26.95 FRONT ENGINE SUBFRAME BUSH TOOL VAG • No hydraulic press required • Application Audi A3 from 2003 Audi TT 2006 to 2010, • Seat Altea from 2004, Leon to 2005, Toledo 111 from 2004 to 2009, Skoda Octavia from 2004 to 2010 • Volkswagen Caddy 111 from 2004 to 2010, Eos to 2006, Golf Plus from 2005 to 2009, Golf V from 2003 to 2009 Golf V1 from 2008 to 2010, Jetta III from 2005 to 2010, Touran to 2003, Passat to 2005, Scirocco to 2008, Tiguan to 2007
£44.95 SHOCK ABSORBER PIN WRENCH MERCEDES-BENZ • Application: Mercedes-Benz E Class (211 chassis 2002-2010) • Used to hold the shock still while undoing fixings on vehicles with air suspension fitted • Equivalent to OEM 211589000500 • Manufactured from Chrome Molybdenum with matt Chrome plated finish • Soft grip handle
6384
ONLY
6270
ONLY
6798
£8.95
7018
ONLY
£159.95 STRUT NUT KIT - 8PC • 3 x Strut Nut Tools for Macpherson front and rear struts. Special top nut sockets which are designed to hold the damper shaft during removal and refitting on VAG models • 1 x Front suspension strut top nuts (shock absorber piston rod top nut) on Mercedes-Benz models • 2 x Clamp expander to remove and replace strut units clamped in the hub without damage on many makes and models. Also 2 tools for use with 16mm/22mm spanner on front wheel drive VAG and Mercedes-Benz.
STRUT NUT SOCKET SET - 5PC • Covers most popular sizes for European vehicles • 1/2"D cut away sockets allows 90° Hex key to hold the strut whilst tightened to correct torque with a torque wrench (Hex key not supplied) • Sizes: 18, 19, 21, 22, 24mm • Supplied with socket rail • Manufactured from Chrome Vanadium
6496
ONLY
5754
£42.95
ONLY
£36.95 SUSPENSION HUB SUPPORT ADAPTOR UNIVERSAL • Use with a transmission jack when removing/installing suspension units • Used to assist in the removal and support of suspension hub and strut assemblies • Use with Transmission jacks fitted with 30mm diameter top shaft • Fits in place of standard transmission Jack saddle.
REAR SUSPENSION BUSH TOOL FORD/VOLVO • Rear trailing arm suspension bush tool kit • Applications: Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 • Equivalent to OEM 205-1017 • Designed to install or remove the bush on the vehicle without the need to disconnect the brake lines or removal of the bush positioning bolts or mounting plates.
6250
7136
6163
ONLY
ONLY
ONLY
£279.95
£259.95
£69.95
Contact your local branch for details or call
0121 749 8801
21