Page 1

Cubic Bore Stroke Rod Inches SMALL BLOCK CHEVY FLAT TOP

Comp Pin Crown Height Diam. Vol

Wght G

462 474 478 486 448 460 464 472 476 488 492 427 429 431 435 438 442 450 454 466 469 445 409 420 423 430 435 446 450 409 420 423 430 435 446 450 406 411 418 429 432 428 396 399 406 408 419 422 419

58cc 11.1 11.2 11.2 11.3 11.8 12.0 12.0 12.1 12.4 12.6 12.6 11.1 11.1 11.1 11.1 11.2 11.2 11.3 11.6 11.8 11.8 12.1 11.1 11.2 11.2 11.3 11.6 11.8 11.8 11.8 12.0 12.0 12.1 12.4 12.6 12.6 12.4 12.4 12.8 13.0 13.0 12.6 12.7 12.8 12.9 13.2 13.4 13.4 13.3

64cc 10.3 10.4 10.4 10.5 11.0 11.1 11.2 11.3 11.6 11.7 11.7 10.3 10.3 10.3 10.4 10.4 10.4 10.5 10.8 10.9 11.0 11.2 10.3 10.4 10.4 10.5 10.8 10.9 11.0 11.0 11.1 11.2 11.3 11.6 11.7 11.7 11.5 11.5 11.9 12.1 12.1 11.8 11.8 11.9 12.0 12.3 12.4 12.5 12.3

70cc 9.6 9.7 9.8 9.8 10.3 10.4 10.4 10.5 10.8 10.9 11.0 9.6 9.6 9.6 9.7 9.7 9.8 9.8 10.1 10.2 10.3 10.5 9.6 9.7 9.8 9.8 10.1 10.2 10.3 10.3 10.4 10.4 10.5 10.8 10.9 11.0 10.7 10.8 11.1 11.3 11.3 11.0 11.0 11.1 11.2 11.5 11.6 11.6 11.5

482 484 495 499 507 454

58cc 10.9 10.9 11.0 11.0 11.1 11.0

64cc 10.1 10.1 10.2 10.3 10.3 10.2

70cc 9.5 9.5 9.6 9.6 9.7 9.6

463 467 471 475

58cc 11.0 11.0 11.1 11.1

64cc 10.2 10.3 10.3 10.3

70cc 9.6 9.6 9.6 9.7

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

350 4.000 3.480/3.500 5.700 1.550 0.927 -5.0cc 355 4.030 357 4.040 360 4.060 377 4.000 3.750 5.700 1.425 0.927 -5.0cc 383 4.030 385 4.040 388 4.060 400 4.125 407 4.155 409 4.165 350 4.000 3.480/3.500 6.000 1.250 0.927 -5.0cc 351 4.005 352 4.010 353 4.020 355 4.030 357 4.040 360 4.060 372 4.125 377 4.155 379 4.165 388 4.125 3.625 6.000 1.188 0.927 -5.0cc 350 4.000 3.480/3.500 6.125 1.125 0.927 -5.0cc 355 4.030 357 4.040 360 4.060 372 4.125 377 4.155 379 4.165 377 4.000 3.750 6.000 1.125 0.927 -5.0cc 383 4.030 385 4.040 388 4.060 400 4.125 407 4.155 409 4.165 395 4.030 3.875 6.000 1.062R 0.927 -5.0cc 397 4.040 414 4.125 420 4.155 422 4.165 426 4.185 -8.0cc 408 4.030 4.000 6.000 1.000R 0.927 -5.0cc 410 4.040 414 4.060 428 4.125 434 4.155 436 4.165 440 4.185 -6.5cc Compression Heights with "R" INCLUDE Oil Support Rails SMALL BLOCK CHEVY 4-VALVE POCKET FLAT TOP 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

350 351 355 357 360 355

4.000 4.005 4.030 4.040 4.060 4.030

3.480/3.500

3.480/3.500

5.700

6.000

1.550 0.927 -5.0cc

1.250 0.927 -5.0cc

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

930200000 930200030 930200040 930200060 930200100 930200130 930200140 930200160 930200225 930200255 930200265 930200300 930200305 930200310 930200320 930200330 930200340 930200360 930200425 930200455 930200465 930200525 930200600 930200630 930200640 930200660 930200725 930200755 930200765 930200600 930200630 930200640 930200660 930200725 930200755 930200765 930200830 930200840 930200925 930200955 930200965 930201385 930201030 930201040 930201060 930201125 930201155 930201165 930201285

SBC550000F05 SBC550030F05 SBC550040F05 SBC550060F05 SBC425000F05 SBC425030F05 SBC425040F05 SBC425060F05 SBC425125F05 SBC425155F05 SBC425165F05 SBC250000F05

SBC250030F05 SBC250040F05 SBC250060F05 SBC250125F05 SBC250155F05 SBC250165F05 SBC188125F05 SBC125000F05 SBC125030F05 SBC125040F05 SBC125060F05 SBC125125F05 SBC125155F05 SBC125165F05 SBC125000F05 SBC125030F05 SBC125040F05 SBC125060F05 SBC125125F05 SBC125155F05 SBC125165F05 SBC062030F05 SBC062040F05 SBC062125F05 SBC062155F05 SBC062165F05 SBC062185F08 SBC000030F05 SBC000040F05 SBC000060F05 SBC000125F05 SBC000155F05 SBC000165F05 SBC000185F07

930203600 930203605 930203630 930203640 930203660 930203730

SBC550030F4V SBC550040F4V SBC550060F4V SBC250030F4V

197725130 197725140 197725150 197725160

WIS550030F05 WIS550040F05 WIS550050F05 WIS550060F05

4032 4032

0.250 0.250

0.0025 0.0033 0.0025 0.0033

4032

0.250

0.0025 0.0033

4032

0.250

0.0025 0.0033

2618 4032

0.250 0.250

0.0046 0.0054 0.0025 0.0033

2618

0.250

0.0046 0.0054

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

SMALL BLOCK CHEVY WISSOTA CONCEPT ENGINE 1.5, 1.5, 3.0mm File Fit Performance Ring Set included APPROVED PN w/ Laser Etch for WISSOTA Series

355 357 359 360

4.030 4.040 4.050 4.060

3.480/3.500

5.700

2019 | 1 Phone: 1300 350 351

1.550 0.927 -5.0cc

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.500

0.0036 0.0044

4032

0.250

0.0036 0.0044

4032

0.250

0.0036 0.0044

4032

0.250

0.0036 0.0044

930206530 930206540 930206560 930206630 930206640 930206660 930206730 930206740 930206760 930206730 930206740 930206760

SBC550030F02 SBC550040F02 SBC550060F02 SBC250030F02 SBC250040F02 SBC250060F02 SBC125030F02 SBC125040F02 SBC125060F02 SBC125030F02 SBC125040F02 SBC125060F02

930202530 930202535 930202540 930202545 930202550 930202560 930202630 930202635 930202640 930202645 930202650 930202660 930202830 930202840 930202830 930202840

SBC550030T04

SMALL BLOCK CHEVY 2bbl LIGHT WEIGHT FLAT TOP Asymmetrical Valve Pockets 1.0, 1.0, 2.0mm File Fit Performance Ring set included Light Weight 92g pins included

357 359 362 357 359 362 357 359 362 383 385 388

4.030 4.040 4.060 4.030 4.040 4.060 4.030 4.040 4.060 4.030 4.040 4.060

3.500

5.700

1.550 0.927 -2.4cc

3.500

6.000

1.250 0.927 -2.4cc

3.500

6.125

1.125 0.927 -2.4cc

3.750

6.000

1.125 0.927 -2.4cc

411 415 423 376 379 386 360 364 370 360 364 370

58cc 11.6 11.7 11.8 11.6 11.7 11.8 11.6 11.7 11.8 12.4 12.4 12.5

64cc 10.8 10.8 10.9 10.8 10.8 10.9 10.8 10.8 10.9 11.5 11.5 11.6

70cc 10.1 10.1 10.2 10.1 10.1 10.2 10.1 10.1 10.2 10.7 10.7 10.8

SMALL BLOCK CHEVY HIGH OUTPUT 2bbl 22º/23º FLAT TOP Gasported / Asymmetrical Valve Pockets PowerPak Plus 1.0, 1.0, 2.0mm File Fit Performance Ring set included Light Weight 92g pins included

357 358 359 360 361 362 357 358 359 360 361 362 357 359 383 385

4.030 4.035 4.040 4.045 4.050 4.060 4.030 4.035 4.040 4.045 4.050 4.060 4.030 4.040 4.030 4.040

3.500

3.500

5.700

6.000

1.550 0.927 - 4.1cc

1.250 0.927 - 4.1cc

3.500

6.125

1.125 0.927 - 4.1cc

3.750

6.000

1.125 0.927 - 4.1cc

429 431 433 435 437 441 393 395 397 398 400 404 377 380 377 380

58cc 11.4 11.4 11.4 11.5 11.5 11.5 11.4 11.4 11.4 11.5 11.5 11.5 11.4 11.4 12.1 12.2

64cc 10.6 10.6 10.6 10.6 10.7 10.7 10.6 10.6 10.6 10.6 10.7 10.7 10.6 10.6 11.3 11.3

70cc 9.9 9.9 9.9 9.9 10.0 10.0 9.9 9.9 9.9 9.9 10.0 10.0 9.9 9.9 10.5 10.5

4032

4032

0.500

0.250

0.0036 0.0044

0.0036 0.0044

4032

0.250

0.0036 0.0044

4032

0.250

0.0036 0.0044

2618

0.500

0.0055 0.0063

SBC550040T04 SBC550050T04 SBC550060T04 SBC250030T04 SBC250040T04 SBC250050T04 SBC250060T04 SBC125030T04 SBC125040T04 SBC125030T04 SBC125040T04

SMALL BLOCK CHEVY 21° FLAT TOP Gasported / Asymmetrical Valve Pockets PowerPak Plus For DART 49cc heads and other 21° angle milled heads 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

357 359 361 362 363 357 359 361 362 363 357 359 361 362 363 374 380 381 383 385 386 388 389 400 407 409

4.030 4.040 4.050 4.060 4.065 4.030 4.040 4.050 4.060 4.065 4.030 4.040 4.050 4.060 4.065 4.125 4.155 4.165 4.030 4.040 4.050 4.060 4.065 4.125 4.155 4.165

3.500

3.500

3.500

3.750

5.700

Phone: 1300 350 351

460 464 468 472 474 420 423 427 431 432 403 406 410 413 415 436 446 450 403 406 410 413 415 436 446 450

49cc 12.2 12.3 12.3 12.4 12.4 12.0 12.1 12.1 12.2 12.2 12.0 12.1 12.1 12.2 12.2 12.5 12.6 12.7 12.8 12.9 12.9 13.0 13.0 13.3 13.5 13.5

197724930 197724940 197724950 197724960 197724965 6.000 1.250 0.927 -8.9cc 2618 0.500 0.0055 0.0063 197726830 197726840 197726850 197726860 197726865 6.125 1.125 0.927 -8.9cc 2618 0.250 0.0055 0.0063 197753130 197753140 197753150 197753160 197753165 2618 0.250 0.0055 0.0063 197753325 197753355 197753365 6.000 1.125 0.927 -8.9cc 2618 0.250 0.0055 0.0063 197753130 197753140 197753150 197753160 197753165 2618 0.250 0.0055 0.0063 197753325 197753355 197753365 Continues on next page Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt. "Min" and "Max" is the suggested range of clearance over the coating for each application. Compression Ratio calculated at zero deck and 0.040" gasket unless otherwise noted

2019 | 2

1.550 0.927 -7.9cc

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

SMALL BLOCK CHEVY 21° FLAT TOP Gasported / Asymmetrical Valve Pockets PowerPak Plus continued 49cc 404 12.9 2618 0.250 388 4.125 3.625 6.125 1.062R 0.927 -8.9cc 393 4.155 414 13.1 395 4.165 418 13.1 404 13.7 2618 0.250 414 4.125 3.875 6.000 1.062R 0.927 -8.9cc 420 4.155 414 13.9 422 4.165 418 13.9 Compression Heights with "R" INCLUDE Oil Support Rails

Current Part No.

Old Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

SMALL BLOCK CHEVY 305ci FLAT TOP 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

310 312 313 315

3.766 3.776 3.786 3.796

3.480

5.700

1.550 0.927 -3.0cc

405 409 413 417

58cc 10.3 10.3 10.4 10.4

64cc 9.5 9.6 9.6 9.7

70cc 8.9 8.9 9.0 9.0

0.0055 0.0063

0.0055 0.0063

197779125 197779155 197779165 197779125 197779155 197779165

0.500

0.0036 0.0044

930204566 930204576 930204586 930204596

SBC550766F03 SBC550776F03 SBC550786F03 SBC550796F03

4032

0.500

0.0036 0.0044

930205566 930205576 930205586 930205596

SBC550766T01 SBC550776T01 SBC550786T01 SBC550796T01

4032

0.500

0.0047 0.0051

930127800 930127802 930127805 930127808 930127820 930127830

2618

0.500

0.0046 0.0054

2618

0.500

0.0046

2618

0.500

0.0046

2618

0.250

0.0046

2618

0.250

0.0046

2618

0.250

0.0046

2618

0.250

0.0046

2618

0.250

0.0046

2618

0.250

0.0046

2618

0.250

0.0046

2618

0.250

0.0046

4032

SMALL BLOCK CHEVY 305ci FLAT TOP Gasported / Asymmetrical Valve Pockets PowerPak Plus 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

409 413 417 421

58cc 10.5 10.5 10.6 10.6

64cc 9.7 9.8 9.8 9.9

70cc 9.0 9.1 9.1 9.2

548 549 550 552 557 561

58cc 11.1 11.1 11.1 11.1 11.2 11.2

64cc 10.3 10.3 10.3 10.3 10.4 10.4

70cc 9.6 9.6 9.6 9.7 9.7 9.7

521 525 515 527 532 484 488 496 524 470 474 481 498 509 513 463 466 474 478 490 493 470 474 481 498 509 513 463 466 474 478 490 493

58cc 14.2 14.2 14.1 14.3 14.3 14.2 14.2 14.3 14.9 14.2 14.2 14.3 14.7 14.9 14.9 13.1 13.1 13.2 13.1 13.3 13.3 15.2 15.2 15.4 15.8 15.9 16.0 14.0 14.0 14.2 14.1 14.2 14.3

64cc 12.9 12.9 13.0 13.1 13.2 12.9 12.9 13.0 13.5 12.9 12.9 13.0 13.4 13.5 13.6 12.0 12.0 12.1 12.1 12.2 12.3 13.8 13.9 14.0 14.3 14.5 14.5 12.8 12.9 13.0 12.9 13.1 13.1

70cc 11.8 11.9 12.0 12.1 12.2 11.8 11.9 12.0 12.4 11.8 11.9 12.0 12.3 12.4 12.5 11.1 11.1 11.2 11.2 11.3 11.4 12.7 12.7 12.8 13.1 13.3 13.3 11.8 11.9 12.0 12.0 12.1 12.2

Light Weight 92 gram pins included

310 312 313 315

3.766 3.776 3.786 3.796

3.480

5.700

1.550 0.927 -1.6cc

GM 604 Crate Engine Drop-In Forged Replacement Requires 2.0mm, 1.5mm, 4.0mm Ring Set (Not Included)

350 350 351 351 353 355

4.000 4.002 4.005 4.008 4.020 4.030

3.480

5.700

1.559 0.927 -4.9cc

SMALL BLOCK CHEVY DOME 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

355 4.030 3.480/3.500 5.700 1.550 0.927 11.1cc 357 4.040 400 4.125 3.750 5.700 1.425 0.927 4.1cc 407 4.155 409 4.165 355 4.030 3.480/3.500 6.000 1.250 0.927 11.1cc 357 4.040 360 4.060 377 4.155 355 4.030 3.480/3.500 6.125 1.125 0.927 11.1cc 357 4.040 360 4.060 372 4.125 377 4.155 379 4.165 355 4.030 6.0cc 357 4.040 360 4.060 372 4.125 4.0cc 377 4.155 379 4.165 383 4.030 3.750 6.000 1.125 0.927 11.1cc 385 4.040 388 4.060 400 4.125 407 4.155 409 4.165 383 4.030 6.0cc 385 4.040 388 4.060 400 4.125 4.0cc 407 4.155 409 4.165 Compression Heights with "R" INCLUDE Oil Support Rails

2019 | 3 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

930207530 SBC550030D11 930207540 SBC550040D11 0.0054 930207825 SBC425125D04 930207855 SBC425155D04 930207865 SBC425165D04 0.0054 930207930 SBC250030D11 930207940 SBC250040D11 930207960 SBC250060D11 930208055 SBC250155D11 0.0054 930208130 SBC125030D11 930208140 SBC125040D11 930208160 SBC125060D11 0.0054 930208225 SBC125125D11 930208255 SBC125155D11 930208265 SBC125165D11 0.0054 930208330 SBC125030D06 930208340 SBC125040D06 930208360 SBC125060D06 0.0054 930212525 SBC125125D04 930212555 SBC125155D04 930212565 SBC125165D04 0.0054 930208130 SBC125030D11 930208140 SBC125040D11 930208160 SBC125060D11 0.0054 930208225 SBC125125D11 930208255 SBC125155D11 930208265 SBC125165D11 0.0054 930208330 SBC125030D06 930208340 SBC125040D06 930208360 SBC125060D06 0.0054 930212525 SBC125125D04 930212555 SBC125155D04 930212565 SBC125165D04 Continues on next page

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

SMALL BLOCK CHEVY DOME continued 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

395 4.030 3.875 6.000 1.062R 0.927 11.1cc 397 4.040 401 4.060 414 4.125 4.0cc 420 4.155 422 4.165 434 4.155 4.000 6.000 1.000R 0.927 8.0cc 428 4.125 4.0cc 434 4.155 436 4.165 Compression Heights with "R" INCLUDE Oil Support Rails

451 454 462 459 470 474 471 449 459 463

Compression Ratio 58cc 15.7 15.7 15.8 14.5 14.7 14.7 16.1 15.0 15.1 15.2

64cc 14.2 14.3 14.4 13.3 13.5 13.6 14.7 13.7 13.9 14.0

70cc 13.0 13.1 13.2 12.4 12.5 12.5 13.5 12.7 12.9 12.9

SMALL BLOCK CHEVY 23° DOME Gasported / Asymmetrical Valve Pockets PowerPak Plus 58cc 64cc 70cc 357 4.030 3.500 6.000 1.250 0.927 12.0cc 474 14.5 13.1 12.0 359 4.040 478 14.5 13.2 12.1 361 4.050 481 14.6 13.2 12.1 362 4.060 485 14.6 13.3 12.2 374 4.125 12.0cc 482 15.0 13.6 12.5 376 4.135 486 15.1 13.7 12.5 378 4.145 490 15.1 13.7 12.6 380 4.155 494 15.2 13.8 12.6 381 4.165 497 15.2 13.8 12.7 385 4.185 505 15.3 13.9 12.8 357 4.030 3.500 6.125 1.125 0.927 12.0cc 455 14.5 13.1 12.0 359 4.040 459 14.5 13.2 12.1 361 4.050 463 14.6 13.2 12.1 362 4.060 466 14.6 13.3 12.2 400 4.125 9.0cc 446 14.3 13.0 12.0 403 4.135 450 14.3 13.1 12.0 405 4.145 454 14.4 13.1 12.1 407 4.155 457 14.4 13.2 12.1 409 4.165 461 14.5 13.2 12.2 385 4.185 468 14.6 13.3 12.3 383 4.030 3.750 6.000 1.125 0.927 12.0cc 455 15.4 14.0 12.8 385 4.040 459 15.5 14.0 12.9 386 4.050 463 15.5 14.1 12.9 388 4.060 466 15.6 14.2 13.0 400 4.125 9.0cc 446 15.2 13.9 12.8 403 4.135 450 15.3 13.9 12.8 405 4.145 454 15.3 14.0 12.9 407 4.155 457 15.4 14.0 12.9 409 4.165 461 15.5 14.1 13.0 413 4.185 468 15.6 14.2 13.1 428 13.6 12.5 11.6 388 4.125 3.625 6.125 1.062R 0.927 4.0cc 389 4.135 432 13.7 12.6 11.7 391 4.145 435 13.8 12.6 11.7 393 4.155 439 13.8 12.7 11.8 395 4.165 442 13.9 12.7 11.8 399 4.185 450 14.0 12.8 11.9 388 4.125 9.0cc 442 14.7 13.5 12.4 389 4.130 444 14.8 13.5 12.4 389 4.135 445 14.8 13.5 12.4 390 4.140 447 14.8 13.5 12.5 391 4.145 449 14.9 13.6 12.5 392 4.150 450 14.9 13.6 12.5 393 4.155 452 14.9 13.6 12.5 394 4.160 454 14.9 13.6 12.5 395 4.165 456 15.0 13.7 12.6 396 4.170 458 15.0 13.7 12.6 398 4.180 461 15.1 13.7 12.6 399 4.185 463 15.1 13.8 12.7 6.000 1.062R 0.927 4.0cc 428 14.5 13.3 12.4 388 4.125 3.875 389 4.135 432 14.6 13.4 12.4 391 4.145 435 14.6 13.4 12.4 393 4.155 439 14.7 13.5 12.5 395 4.165 442 14.7 13.6 12.5 399 4.185 450 14.9 13.7 12.6 Compression Heights with "R" INCLUDE Oil Support Rails

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

2618

0.250

0.0046 0.0054

2618

0.250

0.0046 0.0054

2618 2618

0.250 0.250

0.0046 0.0054 0.0046 0.0054

930208530 930208540 930208560 930208625 930208655 930208665 930208755 930208825 930208855 930208865

SBC062030D11 SBC062040D11 SBC062060D11 SBC062125D04 SBC062155D04 SBC062165D04 SBC000155D08 SBC000125D04 SBC000155D04 SBC000165D04

2618

0.500

0.0055 0.0063

2618

0.500

0.0055

2618

0.250

0.0055

2618

0.250

0.0055

2618

0.250

0.0055

2618

0.250

0.0055

2618

0.250

0.0055

2618

0.250

0.0055

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

2019 | 4 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

197754130 197754140 197754150 197754160 0.0063 197836025 197836035 197836045 197836055 197836065 197836085 0.0063 197754330 197754340 197754350 197754360 0.0063 197754525 197754535 197754545 197754555 197754565 197754585 0.0063 197754330 197754340 197754350 197754360 0.0063 197754525 197754535 197754545 197754555 197754565 197754585 0.0063 197754925 197754935 197754945 197754955 197754965 197754985 197754725 197754730 197754735 197754740 197754745 197754750 197754755 197754760 197754765 197754770 197754780 197754785 0.0063 197754925 197754935 197754945 197754955 197754965 197754985 Continues on next page

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

SMALL BLOCK CHEVY 23° DOME Gasported / Asymmetrical Valve Pockets PowerPak Plus continued 58cc 64cc 70cc 442 15.7 14.3 13.2 414 4.125 3.875 6.000 1.062R 0.927 9.0cc 415 4.130 444 15.7 14.3 13.2 416 4.135 445 15.8 14.4 13.2 417 4.140 447 15.8 14.4 13.2 418 4.145 449 15.8 14.4 13.3 419 4.150 450 15.8 14.4 13.3 420 4.155 452 15.9 14.5 13.3 421 4.160 454 15.9 14.5 13.3 422 4.165 456 15.9 14.5 13.4 423 4.170 458 16.0 14.6 13.4 425 4.180 461 16.0 14.6 13.4 426 4.185 463 16.1 14.6 13.5 422 15.4 14.1 13.0 2618 0.250 428 4.125 4.000 6.000 1.000R 0.927 6.0cc 430 4.135 426 15.5 14.2 13.1 432 4.145 429 15.5 14.2 13.1 434 4.155 433 15.6 14.3 13.2 436 4.165 437 15.7 14.3 13.2 440 4.185 444 15.8 14.5 13.3 Compression Heights with "R" INCLUDE Oil Support Rails

Current Part No.

Old Part No.

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

SMALL BLOCK CHEVY INVERTED DOME

64cc 8.9 9.9 9.9 10.0 10.0 10.0 9.0 9.0 8.6 8.9 8.4 9.2 9.3 9.3 9.6 9.7 9.7 9.0 9.0 9.4 9.9 9.9 10.0 10.3 10.4 10.4 10.0 10.0 10.0 10.1 10.1 10.4 10.6 10.6

70cc 8.4 9.3 9.3 9.4 9.4 9.5 8.5 8.5 8.2 8.4 8.0 8.7 8.7 8.8 9.0 9.1 9.2 8.5 8.5 8.9 9.3 9.3 9.4 9.7 9.8 9.8 9.4 9.4 9.4 9.5 9.6 9.9 10.0 10.0

SMALL BLOCK CHEVY INVERTED DOME for the 4.3L Turbo Syclone and Typhoon 58cc 64cc 9.4 8.9 266 4.030 3.480/3.500 5.700 1.550 0.927 -20.0cc 489 268 4.040 493 9.5 8.9

70cc 8.4 8.4

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

355 4.030 3.480/3.500 5.700 1.550 0.927 -20.0cc 383 4.030 3.750 5.700 1.425 0.927 -16.0cc 385 4.040 388 4.060 407 4.155 -20.0cc 409 4.165 -26.0cc 383 4.030 385 4.040 -31.0cc 383 4.030 355 4.030 3.480/3.500 6.000 1.250 0.927 -20.0cc 355 4.030 -26.0cc 355 4.030 3.480/3.500 6.125 1.125 0.927 -16.0cc 357 4.040 360 4.060 372 4.125 377 4.155 379 4.165 383 4.030 3.750 6.000 1.125 0.927 -26.0cc 385 4.040 407 4.155 383 4.030 -16.0cc 385 4.040 388 4.060 400 4.125 407 4.155 409 4.165 395 4.030 3.875 6.000 1.062R 0.927 -18.1cc 397 4.040 414 4.125 -22.0cc 420 4.155 422 4.165 428 4.125 4.000 6.000 1.000R 0.927 -20cc 434 4.155 436 4.165 Compression Heights with "R" INCLUDE Oil Support Rails

486 478 482 490 516 520 485 489 489 458 457 444 448 455 460 472 476 451 456 481 444 448 455 460 472 476 421 425 440 452 455 427 438 442

1.5, 1.5, 3.0mm File Fit Performance Ring Set included

58cc 9.4 10.5 10.6 10.6 10.6 10.6 9.5 9.5 9.1 9.4 8.9 9.8 9.9 10.0 10.2 10.3 10.4 9.5 9.5 10.0 10.5 10.6 10.6 10.9 11.1 11.1 10.6 10.6 10.6 10.7 10.7 11.1 11.2 11.3

0.0055 0.0063

4032 4032

0.500 0.500

0.0025 0.0033 0.0025 0.0033

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

2618 4032 2618 4032

0.500 0.500 0.500 0.250

0.0046 0.0025 0.0046 0.0025

4032

0.250

0.0025 0.0033

4032

0.250

0.0025 0.0033

4032

0.250

0.0025 0.0033

4032

0.250

0.0025 0.0033

4032

0.500

0.0025 0.0033

0.0054 0.0033 0.0054 0.0033

197754725 197754730 197754735 197754740 197754745 197754750 197754755 197754760 197754765 197754770 197754780 197754785 197830025 197830035 197830045 197830055 197830065 197830085

930210130 930210230 930210240 930210260 930210355 930210365 930210430 930210440 930210530 930210630 930210730 930210830 930210840 930210860 930210925 930210955 930210965 930211030 930211040 930211155 930210830 930210840 930210860 930210925 930210955 930210965 930211230 930211240 930211325 930211355 930211365 930211425 930211455 930211465

SBC550030I20 SBC425030I16 SBC425040I16 SBC425060I16 SBC425155I20 SBC425165I20 SBC425030I26 SBC425040I26 SBC425030I31 SBC250030I20 SBC250030I26 SBC125030I16 SBC125040I16 SBC125060I16 SBC125125I16 SBC125155I16 SBC125165I16 SBC125030I26 SBC125040I26 SBC125155I26 SBC125030I16 SBC125040I16 SBC125060I16 SBC125125I16 SBC125155I16 SBC125165I16 SBC062030I18 SBC062040I18 SBC062125I22 SBC062155I22 SBC062165I22 SBC000125I20 SBC000155I20 SBC000165I20

197751430 197751440

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt. "Min" and "Max" is the suggested range of clearance over the coating for each application. Compression Ratio calculated at zero deck and 0.040" gasket unless otherwise noted

2019 | 5 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

LS 5.3L compatable with LS1/2/6 style cathedral port heads

62cc 65cc 71cc 325 3.780 3.622 6.098 1.330 0.945 -4.2cc 421 10.1 9.7 9.1 2618 0.500 0.0036 0.0044 930218580 327 3.790 425 10.1 9.7 9.1 930218590 329 3.800 428 10.1 9.8 9.1 930218500 325 3.780 -4.2cc 407 10.1 9.7 9.1 4032 0.500 0.0025 0.0033 930217880 329 3.800 414 10.1 9.8 9.1 930217800 325 3.780 3.622 6.125 1.299 0.927 -2.1cc 424 10.3 9.9 9.3 2618 0.500 0.0036 0.0044 930218480 327 3.790 428 10.4 10.0 9.3 930218490 329 3.800 431 10.4 10.0 9.4 930218400 363 3.800 4.000 6.125 1.105 0.927 0cc 391 11.7 11.3 10.5 4032 0.500 0.0025 0.0033 930218200 363 3.800 -16cc 364 9.7 9.4 8.9 4032 0.500 0.0025 0.0033 930219600 *Available In Multiple Alloys **PowerPak Plus 2618 Alloy, Lateral Gas Ports, HD 0.0188"W Wrist Pin & Hard Anodized Top Ring Groove For Extreme Duty Applications

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

* * * LS1330800F04 ** ** ** LS1105800D00 LS1105800I16

LS 5.7L & 6.0L FLAT TOP - compatable with LS1/2/6 style cathedral port heads (Check our our NEW LSX COMBO section for more LS1/2/6 applications) 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

346 347 348 364 365 366 370 346 347 348 346 347 348 364 365 366 370 346 347 348 403 408

3.898 3.905 3.908 4.000 4.005 4.010 4.030 3.898 3.905 3.908 3.898 3.905 3.908 4.000 4.005 4.010 4.030 3.898 3.905 3.908 4.005 4.030

3.622

6.098

1.340 0.945 -4.1cc

-4.0cc

3.622

6.098

1.330 0.945 -4.1cc

3.622

6.125

1.314 0.927 -4.1cc

-4.0cc

3.622

6.125

1.304 0.927 -4.1cc

4.000

6.125

1.105 0.927 -4.0cc

407 410 411 431 433 435 443 425 427 428 406 408 409 430 432 434 442 423 426 427 405 414

62cc 10.6 10.6 10.6 11.0 11.1 11.1 11.2 10.6 10.6 10.6 10.6 10.6 10.6 11.0 11.1 11.1 11.2 10.6 10.6 10.6 12.1 12.2

65cc 10.2 10.2 10.2 10.7 10.7 10.7 10.8 10.2 10.2 10.2 10.2 10.2 10.2 10.7 10.7 10.7 10.8 10.2 10.2 10.2 11.7 11.8

71cc 9.5 9.6 9.6 10.0 10.0 10.0 10.1 9.5 9.6 9.6 9.5 9.6 9.6 10.0 10.0 10.0 10.1 9.5 9.6 9.6 10.9 11.0

65cc 9.0 9.0 10.9 11.0 11.0 10.0 10.0 10.1 11.0 11.0 10.7 10.7 10.8 8.9 9.2 9.2

71cc 8.5 8.5 10.2 10.3 10.3 9.4 9.5 9.5 10.3 10.3 10.0 10.1 10.2 8.5 8.7 8.8

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

2618

0.500

0.0036 0.0044

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

2618

0.500

0.0036 0.0044

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

2618

0.500

0.0036 0.0044

2618

0.500

0.0036 0.0044

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

2618 2618

0.500 0.500

0.0046 0.0054 0.0046 0.0054

0.500

0.0025 0.0033

930217698 930217605 930217608 930217700 930217705 930217710 930217730 930218698 930218605 930218608 930217998 930217905 930217908 930218000 930218005 930218010 930218030 930218798 930218705 930218708 930218105 930218130

LS1340898F04 LS1340905F04 LS1340908F04 LS1340000F04 LS1340005F04 LS1340010F04 LS1340030F04

LS1314898F04 LS1314905F04 LS1314908F04 LS1314000F04 LS1314005F04 LS1314010F04 LS1314030F04

LS1105005F04 LS1105030F04

LS 5.7L & 6.0L DISH - compatable with LS1/2/6 style cathedral port heads (Check our our NEW LSX COMBO section for more LS1/2/6 applications) 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

347 3.905 3.622 6.125 1.314 0.927 -16.0cc 348 3.908 382 3.898 4.000 6.125 1.110R 0.927 -6.0cc 383 3.905 384 3.908 -14.0cc 382 3.898 383 3.905 384 3.908 383 3.905 4.000 6.125 1.105 0.927 -6.0cc 384 3.908 403 4.005 -12.0cc 404 4.010 408 4.030 383 3.905 1.105R 0.927 -26.0cc 403 4.005 -28.0cc 408 4.030 Compression Heights with "R" INCLUDE Oil Support Rails

413 414 398 400 401 381 383 384 386 387 411 413 421 383 416 426

62cc 9.3 9.3 11.3 11.3 11.4 10.3 10.4 10.4 11.3 11.4 11.0 11.1 11.2 9.2 9.4 9.5

930219005 930219008 930219798 930219705 930219708 930219898 930219805 930219808 930219205 930219208 930219305 930219310 930219330 930219405 930219505 930219530

LS1314905I16 LS1314908I16

LS1105905I06 LS1105908I06 LS1105005I12 LS1105010I12 LS1105030I12 LS1105905I26 LS1105005I28 LS1105030I28

LS 6.0L & 6.2L FLAT TOP - compatable with LS3 / L92 style rectangular port heads (Check our our NEW LSX COMBO section for more LS3/L92 applications)

64cc 70cc 72cc 376 4.065 3.622 6.098 1.340 0.945 -4.3cc 457 11.0 10.3 10.1 4032 377 4.070 459 11.1 10.3 10.1 378 4.075 461 11.1 10.3 10.1 379 4.080 463 11.1 10.4 10.1 Compression Heights with "R" INCLUDE Oil Support Rails *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

2019 | 6 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

930223065 L92340065F04 930223070 L92340070F04 930223075 L92340075F04 930223080 Continues on next page

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.500

0.0025 0.0033

L92314005F04 L92314010F04 L92314030F04 L92314065F04 L92314070F04 L92314075F04

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

930223105 930223110 930223130 930223165 930223170 930223175 930223180 930223505 930223530 930223565 930223570 930223575 930223205 930223230 930223265 930223270 930223275 930223280 930223470

2618

0.500

0.0046 0.0054

LS 6.0L & 6.2L FLAT TOP - compatable with LS3 / L92 style rectangular port heads continued (Check our our NEW LSX COMBO section for more LS3/L92 applications)

64cc 70cc 72cc 365 4.005 3.622 6.125 1.314 0.927 -4.3cc 431 10.8 10.1 9.8 366 4.010 433 10.8 10.1 9.9 370 4.030 441 10.9 10.2 9.9 376 4.065 455 11.0 10.3 10.1 377 4.070 457 11.1 10.3 10.1 378 4.075 459 11.1 10.3 10.1 379 4.080 461 11.1 10.4 10.1 403 4.005 4.000 6.125 1.105R 0.927 -4.3cc 414 11.8 11.0 10.8 408 4.030 423 11.9 11.1 10.9 415 4.065 437 12.1 11.3 11.0 416 4.070 439 12.1 11.3 11.1 417 4.075 441 12.1 11.3 11.1 403 4.005 4.000 6.125 1.105 0.927 -4.3cc 404 11.8 11.0 10.8 408 4.030 413 11.9 11.1 10.9 415 4.065 426 12.1 11.3 11.0 416 4.070 428 12.1 11.3 11.1 417 4.075 430 12.1 11.3 11.1 418 4.080 432 12.1 11.3 11.1 429 4.070 4.125 6.125 1.045R 0.927 -7.8cc 421 11.9 11.2 11.0 Compression Heights with "R" INCLUDE Oil Support Rails *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

* * * * * L92105005F04 L92105030F04 L92105065F04 L92105070F04 L92105075F04 *

LS 6.0L & 6.2L DISH - compatable with LS3 / L92 style rectangular port heads (Check our our NEW LSX COMBO section for more LS3/L92 applications)

64cc 70cc 72cc 9.9 9.3 9.1 366 4.010 3.622 6.125 1.314 0.927 -12.1cc 451 370 4.030 459 10.0 9.4 9.2 376 4.065 473 10.1 9.5 9.3 377 4.070 475 10.1 9.5 9.3 378 4.075 477 10.1 9.5 9.4 379 4.080 479 10.2 9.6 9.4 10.1 9.5 9.3 408 4.030 4.000 6.125 1.105R 0.927 -20.0cc 427 415 4.065 4.000 6.125 1.105R 0.927 -25.0cc 440 9.7 9.2 9.1 416 4.070 442 9.7 9.2 9.1 417 4.075 444 9.8 9.3 9.1 418 4.080 446 9.8 9.3 9.1 -25.0cc 448 10.4 9.9 9.7 428 4.125 429 4.130 450 10.5 9.9 9.7 416 4.070 4.000 6.125 1.105 0.927 -25.0cc 443 9.7 9.2 9.1 417 4.075 445 9.8 9.3 9.1 428 4.125 -25.0cc 429 10.0 9.4 9.3 428 4.065 4.125 6.125 1.055R 0.927 -8.0cc 432 11.9 11.1 10.9 429 4.070 434 11.9 11.2 10.9 430 4.075 436 11.9 11.2 11.0 Compression Heights with "R" INCLUDE Oil Support Rails *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications *Available In Multiple Alloys

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

2618 2618

0.500 0.500

0.0049 0.0057 0.0046 0.0054

4032

0.500

0.0025 0.0033

4032 4032

0.500 0.500

0.0025 0.0033 0.0025 0.0033

930224510 930224530 930224565 930224570 930224575 930224580 930224630 930224965 930224970 930224975 930224980 930225025 930225030 930224770 930224775 930224825 930225265 930225270 930225275

L92105030I20 * * * * * * L92105130P25 L92105070I25 L92105075I25 L92105125I25 L92055065I08 L92055070I08 L92055075I08

197813865 197813870 197813875 197813880

* * * *

L92314010I12 L92314030I12 L92314070I12

LS 6.2L DISH (LSA / LS9) - compatable with all LS Heads Designed for High Boost Applications w/ reduced CH and no valve pockets 1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

64cc 69cc 72cc 376 4.065 3.622 6.125 1.299 0.927 -4.5cc 478 10.6 10.0 9.7 2618 0.500 0.0046 0.0054 377 4.070 480 10.6 10.0 9.7 378 4.075 483 10.6 10.0 9.7 379 4.080 485 10.6 10.1 9.8 *PowerPak Plus 2618 Alloy, HD 0.0188"W H13 Wrist Pin & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.005" below deck and 0.051x4.100" head gasket

LS 6.0L & 6.2L DOME - compatable with LS3 / L92 rectangular port heads (Check our our NEW LSX COMBO section for more LS3/L92 applications) 1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

365 366 370 376 377 378

4.005 4.010 4.030 4.065 4.070 4.075

3.622

6.125

2019 | 7 Phone: 1300 350 351

1.314 0.927

2.0cc

470 472 480 494 496 497

70cc 10.8 10.8 10.9 11.1 11.1 11.1

4032

0.500

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

0.0025 0.0033

197719205 197719210 197719230 197719265 197719270 197719275 Continues on next page

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

0.500

197714805 197714810 197714830 197714865 197714870 197714875

Old Part No.

LS 6.0L & 6.2L DOME - compatable with LS3 / L92 rectangular port heads continued (Check our our NEW LSX COMBO section for more LS3/L92 applications)

70cc 365 4.005 3.622 6.125 1.304 0.927 12.0cc 468 12.3 2618 366 4.010 470 12.3 370 4.030 477 12.4 376 4.065 490 12.6 377 4.070 492 12.6 378 4.075 494 12.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

0.0046 0.0054

LS COMBO DOME - compatable with LS1/2/6 style cathedral port heads & LS3 / L92 style rectangular port heads (Does not fit LS7 or 5.3L 706 & 862 Truck Heads) 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included 65cc 66cc 70cc 454 13.9 13.7 12.9 2618 0.500 0.0044 0.0054 402 4.000 4.000 6.125 1.110R 0.927 9.2cc 403 4.005 456 13.9 13.7 13.0 404 4.010 457 13.9 13.7 13.0 408 4.030 465 14.0 13.8 13.1 415 4.065 479 14.2 14.0 13.3 416 4.070 480 14.3 14.1 13.3 417 4.075 482 14.3 14.1 13.3 418 4.080 484 14.3 14.1 13.4 Compression Heights with "R" INCLUDE Oil Support Rails

* * * * * *

930229600 930229605 930229610 930229630 930229665 930229670 930229675 930229680

LS 7.0L FLAT TOP - compatable with LS7 style heads (Check our our NEW LSX COMBO section for more LS7 applications) 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

428 429 430 428 429 430

4.125 4.130 4.135 4.125 4.130 4.135

4.000

6.067

1.181 0.927 -2.5cc

4.000

6.125

1.105 0.927 -2.5cc

448 450 452 438 440 441

64cc 12.6 12.7 12.7 12.6 12.7 12.7

70cc 11.8 11.8 11.8 11.8 11.8 11.8

72cc 11.5 11.5 11.6 11.5 11.5 11.6

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

0.500 0.500

0.0046 0.0054 0.0025 0.0033

2618

0.500

0.0044 0.0054

2618

0.500

2618

0.500

930221525 930221530 930221535 930221625 930221630 930221635

LS7181125F03 LS7181130F03 LS7181135F03 LS7105125F03 LS7105130F03 LS7105135F03

LS 7.0L DISH - compatable with LS7 style heads (Check our our NEW LSX COMBO section for more LS7 applications)

64cc 70cc 72cc 10.0 9.4 9.3 2618 428 4.125 4.000 6.125 1.105R 0.927 -25.0cc 454 440 4.185 1.105 0.927 -6.0cc 456 12.4 11.6 11.4 4032 Compression Heights with "R" INCLUDE Oil Support Rails *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

LSX COMBO FLAT TOP - valve pockets fit LS1/2/6, LS7, and LS3 / L92 style heads 65cc 70cc 364 4.000 3.622 6.098 1.330 0.945 -5.8cc 440 10.4 9.9 365 4.005 442 10.5 9.9 366 4.010 444 10.5 9.9 370 4.030 452 10.6 10.0 376 4.065 467 10.7 10.1 377 4.070 469 10.7 10.2 378 4.075 471 10.8 10.2 379 4.080 473 10.8 10.2 364 4.000 3.622 6.125 1.304 0.927 -5.8cc 439 10.4 9.9 365 4.005 441 10.5 9.9 366 4.010 443 10.5 9.9 370 4.030 451 10.6 10.0 376 4.065 466 10.7 10.1 377 4.070 468 10.7 10.2 378 4.075 470 10.8 10.2 10.2 379 4.080 472 10.8 387 4.125 -5.8cc 479 11.0 10.4 388 4.130 481 11.0 10.4 389 4.135 483 11.0 10.4 393 4.155 491 11.1 10.5 399 4.185 504 11.2 10.6

1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

72cc 9.7 9.7 9.7 9.8 9.9 9.9 10.0 10.0 9.7 9.7 9.7 9.8 9.9 9.9 10.0 10.0 10.2 10.2 10.2 10.3 10.4

930221825 * LS7105125P25 930221985 LS7105185I06

930227000 930227005 930227010 930227030 930227065 930227070 930227075 930227080 0.0044 0.0054 930226800 930226805 930226810 930226830 930226865 930226870 930226875 930226880 0.0044 0.0054 930226925 930226930 930226935 930226955 930226985 Continues on next page

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt. "Min" and "Max" is the suggested range of clearance over the coating for each application. Compression Ratio calculated at zero deck and 0.040" gasket unless otherwise noted

2019 | 8 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

LSX COMBO FLAT TOP - valve pockets fit LS1/2/6, LS7, and LS3 / L92 style heads continued 65cc 70cc 72cc 412 11.4 10.8 10.6 402 4.000 4.000 6.125 1.110R 0.927 -5.8cc 403 4.005 414 11.4 10.8 10.6 404 4.010 416 11.5 10.8 10.6 408 4.030 423 11.6 10.9 10.7 415 4.065 437 11.7 11.1 10.9 416 4.070 439 11.7 11.1 10.9 417 4.075 441 11.8 11.1 10.9 418 4.080 443 11.8 11.2 10.9 428 4.125 -5.8cc 450 12.0 11.4 11.1 429 4.130 452 12.0 11.4 11.1 430 4.135 454 12.1 11.4 11.2 434 4.155 462 12.1 11.5 11.2 440 4.185 474 12.3 11.6 11.4 403 11.7 11.1 10.9 415 4.000 4.125 6.125 1.050R 0.927 -5.8cc 416 4.005 405 11.8 11.1 10.9 417 4.010 407 11.8 11.1 10.9 421 4.030 414 11.9 11.2 11.0 428 4.065 427 12.1 11.4 11.2 429 4.070 429 12.1 11.4 11.2 430 4.075 431 12.1 11.4 11.2 431 4.080 433 12.1 11.5 11.2 441 4.125 -5.8cc 439 12.3 11.7 11.4 442 4.130 441 12.4 11.7 11.5 443 4.135 443 12.4 11.7 11.5 447 4.155 450 12.5 11.8 11.6 454 4.185 462 12.6 12.0 11.7 433 12.3 11.7 11.4 441 4.125 4.125 6.125 1.045R 0.927 -6.0cc 442 4.130 435 12.4 11.7 11.4 Compression Heights with "R" INCLUDE Oil Support Rails

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

2618

0.500

0.0044 0.0054

2618

0.500

0.0044 0.0054

2618

0.500

0.0044 0.0054

2618

0.500

0.0044 0.0054

4032

0.500

0.0025 0.0033

930227500 930227505 930227510 930227530 930227565 930227570 930227575 930227580 930226725 930226730 930226735 930226755 930226785 930227200 930227205 930227210 930227230 930227265 930227270 930227275 930227280 930227325 930227330 930227335 930227355 930227385 930226525 930226530

LSX045125F08 LSX045130F08

2618

0.500

0.0044 0.0054

2618

0.500

0.0044 0.0054

2618

0.500

0.0044 0.0054

930229725 930229730 930229735 930229755 930229785

0.0046 0.0054

930228765 930228770 930165365 930165370 930173225 930173230

1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

LSX COMBO DISH - valve pockets fit LS1/2/6, LS7, and LS3 / L92 style heads 65cc 10.4 402 4.000 4.000 6.125 1.110R 0.927 -14.0cc 399 403 4.005 400 10.5 404 4.010 402 10.5 408 4.030 410 10.6 415 4.065 423 10.7 416 4.070 425 10.7 417 4.075 427 10.8 418 4.080 429 10.8 -18.0cc 429 10.5 428 4.125 429 4.130 431 10.6 430 4.135 433 10.6 434 4.155 441 10.7 440 4.185 453 10.8 Compression Heights with "R" INCLUDE Oil Support Rails

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

LSX COMBO DOME - valve pockets fit LS1/2/6, LS7, and LS3 / L92 style heads (Does not fit 5.3L 706 & 862 Truck Heads) 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included 65cc 482 13.9 428 4.125 4.000 6.125 1.110R 0.927 5.6cc 429 4.130 484 13.9 430 4.135 486 13.9 434 4.155 494 14.0 440 4.185 506 14.2 Compression Heights with "R" INCLUDE Oil Support Rails

70cc 9.9 10.0 10.0 10.1 10.2 10.2 10.2 10.3 10.1 10.1 10.1 10.2 10.3

72cc 9.7 9.8 9.8 9.9 10.0 10.0 10.0 10.1 9.9 9.9 9.9 10.0 10.1

66cc 13.7 13.7 13.7 13.8 14.0

70cc 13.0 13.0 13.0 13.1 13.3

930229400 930229405 930229410 930229430 930229465 930229470 930229475 930229480 930229525 930229530 930229535 930229555 930229585

LT 6.2L FLAT TOP - compatable with GM LT1 / L86 / LT4 heads

60cc 65.5cc 376 4.065 3.622 6.125 1.304 0.927 -4.5cc 481 11.6 10.8 2618 0.500 377 4.070 483 11.6 10.8 415 4.065 4.000 6.125 1.105 0.927 -4.3cc 439 12.7 11.9 2618 0.500 416 4.070 441 12.7 11.9 428 4.125 -6.1cc 455 12.7 11.9 2618 0.500 429 4.130 457 12.7 11.9 *2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications, designed for aftermarket rods

1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

2019 | 9 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

0.0046 0.0054 0.0046 0.0054

* * * * * *

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

LT 6.2L INVERTED DOME - compatable with GM LT1 / L86 / LT4 heads

60cc 65.5cc 10.1 9.6 2618 0.500 376 4.065 3.622 6.125 1.304 0.927 -16.0cc 440 377 4.070 442 10.1 9.6 10.5 9.9 2618 0.500 416 4.070 4.000 6.125 1.105 0.927 -21.6cc 409 *2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications, designed for aftermarket rods

1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

0.0046 0.0054 0.0046 0.0054

930228365 * 930228370 * 930228070 *

NHRA LEGAL COPO CAMARO Does not include rings or pins. Made to order. Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech

2018 COPO 302 - 1.0mm, 1.0mm, 2.0mm ring grooves Dependent Upon Bore Size 311 4.065* 3.000 6.560 1.170 0.927 10.7cc 450 2014-2015 COPO 350 Supercharged 530HP - .043", .043", 3.0mm Ring Grooves Dependent Upon Bore Size 350 4.065* 3.370 6.350 1.200 0.927 12.7cc 484 2016 COPO Supercharged 580HP - .043", .043", 3.0mm Ring Grooves Dependent Upon Bore Size 360 4.125* 3.370 6.350 1.200 0.927 12.7cc 474 2013-2015 COPO 396 390HP - 1.5mm, 1.5mm, 3.0mm Ring Grooves 419 Dependent Upon Bore Size 397 4.065* 3.825 6.125 1.105R 0.927 -4.0cc 2012-2015 COPO 427 425-430HP - .043", .043", 3.0mm Ring Grooves Dependent Upon Bore Size 428 4.125* 4.000 6.100 1.140 0.927 12.0cc 468 BIG BLOCK CHEVY FLAT TOP 528 542 574 588 537 562 469 481 485 498 513 540 558 494 516

112cc 118cc 124cc 8.6 8.2 7.9 8.7 8.3 8.0 9.3 8.9 8.6 9.4 9.0 8.7 9.3 8.9 8.6 9.6 9.2 8.9 9.0 8.7 8.3 9.1 8.8 8.4 9.2 8.8 8.5 9.3 8.9 8.5 9.8 9.4 9.1 10.0 9.6 9.3 10.2 9.8 9.4 10.9 10.4 10.0 11.3 10.8 10.4

626 640 587 601 617 631 538 543 557 570 566 526 539 543 555 590 616 623 580 592 597 600 606 614 520 532 579

112cc 118cc 124cc 11.1 10.5 9.9 11.2 10.6 10.1 11.1 10.5 9.9 11.2 10.6 10.1 13.8 12.9 12.0 14.0 13.0 12.2 10.9 10.4 9.9 11.1 10.6 10.1 11.2 10.7 10.2 11.4 10.8 10.3 11.5 11.0 10.5 10.7 10.2 9.7 10.8 10.3 9.8 10.9 10.3 9.8 11.0 10.4 9.9 14.1 13.2 12.5 14.4 13.5 12.8 14.6 13.7 12.9 13.8 12.9 12.1 13.9 13.0 12.2 14.0 13.1 12.3 14.1 13.2 12.4 14.8 13.8 12.9 15.0 14.0 13.1 11.0 10.4 9.9 11.1 10.5 10.1 14.0 13.1 12.3

1.5, 1.5, 3.0mm File Fit Performance Ring Set included

460 4.280 4.000 6.135 1.645 0.990 -3.4cc 467 4.310 509 4.500 -3.0cc 516 4.530 509 4.500 4.000 6.385 1.395 0.990 -3.0cc 532 4.600 489 4.280 4.250 6.385 1.270R 0.990 -3.4cc 496 4.310 498 4.320 505 4.350 541 4.500 -3.0cc 555 4.560 565 4.600 604 4.500 4.750 6.660 1.160R 0.990 -3.0cc 632 4.600 Compression Heights with "R" INCLUDE Oil Support Rails BIG BLOCK CHEVY DOME 1.5, 1.5, 3.0mm File Fit Performance Ring Set included

460 4.280 4.000 6.135 1.645 0.990 28.0cc 467 4.310 460 4.280 4.000 6.385 1.395 0.990 28.0cc 467 4.310 460 4.280 48.0cc 467 4.310 541 4.500 4.250 6.385 1.270R 0.990 10.0cc 541 4.500 13.0cc 548 4.530 555 4.560 565 4.600 489 4.280 18.0cc 496 4.310 498 4.320 505 4.350 541 4.500 38.0cc 555 4.560 565 4.600 489 4.280 43.0cc 496 4.310 498 4.320 505 4.350 496 4.310 48.0cc 505 4.350 504 4.280 4.375 6.385 1.228R 0.990 18.0cc 511 4.310 511 4.310 41.0cc Compression Heights with "R" INCLUDE Oil Support Rails

2019 | 10 Phone: 1300 350 351

2618

0.500

0.0044 0.0054

197842100

2618

0.430

0.0056 0.0064

197715800

2618

0.430

0.0056 0.0064

197767300

4032

0.500

0.0025 0.0033

197758000

2618

0.500

0.0056 0.0064

930148500

4032

0.500

0.0041 0.0049

4032

0.600

0.0041 0.0049

4032

0.250

0.0041 0.0049

4032

0.445

0.0041 0.0049

4032

0.375

0.0041 0.0049

929870180 929870110 928956200 928956230 928906700 928906701 929869580 929869510 929869520 929869550 928957000 928957060 928957001 929908800 929908801

BBC645280F03 BBC645310F03 BBC645500F03 BBC645530F03 BBC395500F03 BBC395600F03 BBC270280F03 BBC270310F03 BBC270320F03 BBC270350F03 BBC270500F03 BBC270560F03 BBC270600F03 BBC160500F03 BBC160600F03

2618

0.855

0.0061 0.0069

2618

0.600

0.0061 0.0069

2618

0.600

0.0061 0.0069

4032 4032

0.445 0.445

0.0041 0.0049 0.0041 0.0049

4032

0.250

0.0041 0.0049

2618

0.445

0.0061 0.0069

2618

0.445

0.0061 0.0069

2618

0.445

0.0061 0.0069

4032

0.250

0.0041 0.0049

2618

0.400

0.0061 0.0069

928973780 928973710 928914180 928914110 928909180 928909110 929907500 928965300 928965330 928965360 928965301 929907180 929907110 929907120 929907150 928980200 928980260 928980201 929906780 929906710 929906720 929906750 929934210 929934250 929907280 929907210 929906910

BBC645280D28 BBC645310D28 BBC395280D28 BBC395310D28 BBC395280D48 BBC395310D48 BBC270500D10 BBC270500D13 BBC270530D13 BBC270560D13 BBC270600D13 BBC270280D18 BBC270310D18 BBC270320D18 BBC270350D18 BBC270500D38 BBC270560D38 BBC270600D38 BBC270280D43 BBC270310D43 BBC270320D43 BBC270350D43 BBC270310D48 BBC270350D48 BBC228280D18 BBC228310D18 BBC228310D41

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

679

118cc 8.9

BIG BLOCK CHEVY 502 MARINE "DROP IN" REPLACEMENT 1/16", 1/16", 3/16" File Fit Performance Ring Set included

509

4.500

4.000

6.135

1.645 0.990 -3.0cc

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.415

930077100

MER645500F03

0.0041 0.0049

BIG BLOCK CHEVY ELITE SPORTSMAN DRAG SERIES 24°/25° Domes compatible with popular BBC cylinder heads and high lift, long duration cams. Dual coated and gas ported with advanced skirt profiles. Focused attention on drag race-specific key stress areas. In stock availability on assemblies and singles. .043", .043", 3.0mm Rings sold separately. Available in STD or Low Tension*

Std. Tension

112cc 118cc 124cc 565 4.600 4.250 6.385 1.270 0.990 47.1cc 668 16.3 15.2 14.2 2618 0.500 0.0061 566 4.605 670 16.3 15.2 14.2 568 4.610 673 16.3 15.2 14.2 571 4.625 680 16.4 15.3 14.3 654 16.7 15.6 14.6 2618 0.500 0.0061 582 4.600 4.375 6.385 1.215R 0.990 47.1cc 583 4.605 656 16.7 15.6 14.6 584 4.610 658 16.7 15.6 14.6 588 4.625 665 16.8 15.7 14.7 635 16.7 15.6 14.6 2618 0.500 0.0061 598 4.600 4.500 6.385 1.155R 0.990 45.0cc 600 4.605 637 16.8 15.6 14.7 601 4.610 639 16.8 15.7 14.7 605 4.625 646 16.9 15.7 14.8 619 15.3 14.3 13.5 2618 0.500 0.0061 565 4.600 4.250 6.535 1.120R 0.990 42.0cc 566 4.605 621 15.3 14.3 13.5 568 4.610 623 15.4 14.4 13.5 571 4.625 629 15.4 14.4 13.6 565 4.600 47.1cc 633 16.3 15.2 14.2 2618 0.500 0.0061 566 4.605 635 16.3 15.2 14.2 568 4.610 637 16.3 15.2 14.2 571 4.625 644 16.4 15.3 14.3 619 16.1 15.1 14.2 2618 0.500 0.0061 598 4.600 4.500 6.800 1.120R 0.990 42.0cc 600 4.605 621 16.2 15.1 14.2 601 4.610 623 16.2 15.2 14.2 605 4.625 629 16.3 15.2 14.3 598 4.600 47.1cc 633 17.2 16.0 15.0 2618 0.500 0.0061 600 4.605 635 17.2 16.0 15.0 601 4.610 637 17.2 16.0 15.0 605 4.625 644 17.3 16.1 15.1 619 17.0 15.9 14.9 2618 0.500 0.0061 632 4.600 4.750 6.700 1.120R 0.990 42.0cc 633 4.605 621 17.0 15.9 15.0 634 4.610 623 17.1 15.9 15.0 638 4.625 629 17.1 16.0 15.1 632 4.600 47.1cc 633 18.1 16.8 15.7 2618 0.500 0.0061 633 4.605 635 18.1 16.8 15.8 634 4.610 637 18.1 16.9 15.8 638 4.625 644 18.2 17.0 15.9 600 15.4 14.4 13.6 2618 0.500 0.0061 582 4.600 4.375 6.535 1.060R 0.990 40.0cc 583 4.605 602 15.4 14.4 13.6 584 4.610 604 15.4 14.5 13.6 588 4.625 610 15.5 14.5 13.7 582 4.600 47.0cc 619 16.7 15.5 14.6 2618 0.500 0.0061 583 4.605 621 16.7 15.6 14.6 584 4.610 623 16.8 15.6 14.6 588 4.625 629 16.8 15.7 14.7 *Example: 4.600" Bore Size Standard Tension Part #4605SS-043 / 4.600" Bore Size Low Tension Part #4605SL-043 Compression Heights with "R" INCLUDE Oil Support Rails

Ring Part #

Includes 0.180"W pin; optional 0.200"W pins available (PN 9887255)

0.0069

0.0069

0.0069

0.0069

0.0069

0.0069

0.0069

0.0069

0.0069

0.0069

0.0069

930239300 930239305 930239310 930239325 930239400 930239405 930239410 930239425 930239200 930239205 930239210 930239225 930239100 930239105 930239110 930239125 930239500 930239505 930239510 930239525 930239100 930239105 930239110 930239125 930239500 930239505 930239510 930239525 930239100 930239105 930239110 930239125 930239500 930239505 930239510 930239525 930239000 930239005 930239010 930239025 930239600 930239605 930239610 930239625

4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043*

BIG BLOCK CHEVY ELITE SPORTSMAN DRAG SERIES 20° For Brodix BP SR-20 & BRX, Dart Pro 1 20°, etc.

Domes compatible with popular 20° BBC cylinder heads and high lift, long duration cams. Dual coated and lateral gas ported with advanced skirt profiles. Focused attention on drag race-specific key stress areas. In stock availability on assemblies and singles.

.043", .043", 3.0mm Rings sold separately. Available in STD or Low Tension* Includes 0.180"W pin; optional 0.200"W pins available (PN 9887255)

565 4.600 4.250 6.385 1.270 0.990 28.0cc 566 4.605 568 4.610 571 4.625 565 4.600 4.250 6.800 1.270 0.990 28cc 566 4.605 568 4.610 571 4.625 Compression Heights with "R" INCLUDE Oil Support Rails

2019 | 11 Phone: 1300 350 351

642 645 647 654 642 645 647 654

Std. Tension

95cc 15.9 15.9 15.9 16.0 15.9 15.9 15.9 16.0

97cc 15.5 15.5 15.5 15.6 15.5 15.5 15.5 15.6

100cc 15.0 15.0 15.0 15.1 15.0 15.0 15.0 15.1

Ring Part #

2618

0.500

2618

0.500

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

0.0061 0.0069

930240000 4605SS-043* 930240005 4610SS-043* 930240010 4615SS-043* 930240025 4630SS-043* 0.0061 0.0069 930240000 4605SS-043* 930240005 4610SS-043* 930240010 4615SS-043* 930240025 4630SS-043* Continues on next page

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

BIG BLOCK CHEVY ELITE SPORTSMAN DRAG SERIES 20° continued For Brodix BP SR-20 & BRX, Dart Pro 1 20°, etc. .043", .043", 3.0mm Rings sold separately. Available in STD or Low Tension* Includes 0.180"W pin; optional 0.200"W pins available (PN 9887255)

Std. Tension

95cc 16.7 16.8 16.8 16.9 15.0 15.0 15.0 15.1 15.4 15.4 15.4 15.5 15.8 15.8 15.8 15.9 16.6 16.6 16.7 16.8 16.3 16.3 16.4 16.4

97cc 16.3 16.4 16.4 16.5 14.6 14.7 14.7 14.8 15.0 15.1 15.1 15.2 15.4 15.5 15.5 15.6 16.2 16.3 16.3 16.4 15.9 15.9 16.0 16.1

100cc 15.8 15.8 15.8 15.9 14.2 14.2 14.2 14.3 14.6 14.6 14.6 14.7 14.9 15.0 15.0 15.1 15.7 15.7 15.8 15.9 15.4 15.4 15.4 15.5

58cc 11.0 9.6 9.6 9.6 9.6 12.0 12.1 12.0 12.1 12.0 12.0 12.5 12.5 12.6 12.5 12.5 12.6 13.0 13.0 13.1 13.0 13.0 13.1 12.8 12.8 12.9 12.8 12.8 12.9 13.3 13.3 13.4 13.3 13.3 13.4 10.3 10.4

64cc 10.3 9.0 9.0 9.0 9.0 11.2 11.2 11.2 11.2 11.2 11.2 11.6 11.6 11.7 11.6 11.6 11.7 12.1 12.1 12.2 12.1 12.1 12.2 11.9 11.9 12.0 11.9 11.9 12.0 12.3 12.4 12.5 12.3 12.4 12.5 9.6 9.7

70cc 9.6 8.4 8.4 8.4 8.4 10.5 10.5 10.5 10.5 10.5 10.5 10.9 10.9 11.0 10.9 10.9 11.0 11.3 11.3 11.4 11.3 11.3 11.4 11.1 11.1 11.2 11.1 11.1 11.2 11.5 11.6 11.7 11.5 11.6 11.7 9.0 9.0

Ring Part #

598 4.600 4.500 6.385 1.155R 0.990 28.0cc 615 2618 0.500 0.0061 600 4.605 618 601 4.610 620 605 4.625 626 624 2618 0.500 0.0061 565 4.600 4.250 6.535 1.120R 0.990 23.0cc 566 4.605 626 568 4.610 628 571 4.625 634 624 2618 0.500 0.0061 582 4.600 4.375 6.480 1.120R 0.990 23.0cc 583 4.605 626 584 4.610 628 588 4.625 634 624 2618 0.500 0.0061 598 4.600 4.500 6.800 1.120R 0.990 23.0cc 600 4.605 626 601 4.610 628 605 4.625 634 624 2618 0.500 0.0061 632 4.600 4.750 6.700 1.120R 0.990 23.0cc 633 4.605 626 634 4.610 628 638 4.625 634 594 2618 0.500 0.0061 582 4.600 4.375 6.535 1.060R 0.990 28.0cc 583 4.605 597 584 4.610 599 588 4.625 605 Compression Heights with "R" INCLUDE Oil Support Rails *Example: 4.600" Bore Size Standard Tension Part #4605SS-043 / 4.600" Bore Size Low Tension Part #4605SL-043 SMALL BLOCK FORD FLAT TOP 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

357 306 308 306 308 393 395 393 395 393 393 408 410 414 408 410 414 428 429 434 428 429 434 418 420 425 418 420 425 438 439 445 438 439 445 332 333

4.030 4.030 4.040 4.030 4.040 4.030 4.040 4.030 4.040 4.030 4.030 4.030 4.040 4.060 4.030 4.040 4.060 4.125 4.130 4.155 4.125 4.130 4.155 4.030 4.040 4.060 4.030 4.040 4.060 4.125 4.130 4.155 4.125 4.130 4.155 4.030 4.040

3.500 3.000

3.850

5.956 5.090

5.956

1.775 0.912 -6.5cc 1.600 0.912 -6.5cc

1.600 0.912 -6.5cc

3.850

6.200

1.350 0.927 -6.5cc

4.000

6.250

1.245 0.927 -6.5cc

4.100

3.250

6.200

5.400

2019 | 12 Phone: 1300 350 351

1.245 0.927 -6.5cc

1.165 0.927 -6.5cc

489 483 488 469 474 483 488 469 474 451 438 437 44 448 424 428 436 448 450 460 435 437 447 437 441 448 424 428 436 448 450 460 435 437 447 425 429

0.0069

0.0069

0.0069

0.0069

0.0069

0.500 0.500

0.0025 0.0033 0.0046 0.0054

4032

0.500

0.0025

2618

0.500

0.0046

4032

0.500

0.0025

2618 4032 2618

0.500 0.500 0.500

0.0046 0.0025 0.0046

4032

0.500

0.0025

2618

0.500

0.0046

4032

0.500

0.0025

2618

0.500

0.0046

4032

0.500

0.0025

2618

0.500

0.0046

4032

0.500

0.0025

2618

0.500

0.0046

Web: www.fabre.com.au

930239900 930239905 930239910 930239925 930239800 930239805 930239810 930239825 930239800 930239805 930239810 930239825 930239800 930239805 930239810 930239825 930239800 930239805 930239810 930239825 930239700 930239705 930239710 930239725

4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043* 4605SS-043* 4610SS-043* 4615SS-043* 4630SS-043*

930244030 SBF775030F06 930245330 * 930245340 * 0.0033 930244130 SBF600030F06 930244140 SBF600040F06 0.0054 930245330 * 930245340 * 0.0033 930244130 SBF600030F06 930244140 SBF600040F06 0.0054 930245930 * 0.0033 930244230 SBF350030F06 0.0054 930245130 * 930245140 * 930245160 * 0.0033 930244330 SBF245030F06 930244340 SBF245040F06 930244360 SBF245060F06 0.0054 930245225 * 930245230 * 930245255 * 0.0033 930244425 SBF245125F06 930244430 SBF245130F06 930244455 SBF245155F06 0.0054 930245130 * 930245140 * 930245160 * 0.0033 930244330 SBF245030F06 930244340 SBF245040F06 930244360 SBF245060F06 0.0054 930245225 * 930245230 * 930245255 * 0.0033 930244425 SBF245125F06 930244430 SBF245130F06 930244455 SBF245155F06 0.0054 930245430 * 930245440 * Continues on next page

4032 2618

www.mahlemotorsports.com Fax: 1300 350 454

0.0069

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

SMALL BLOCK FORD FLAT TOP continued 413 417 437 448 415 426 425 429 413 417 437 448 415 426 407 411 401 412 414 415 423 392 402 404 405 412 423 435 413 424

58cc 10.3 10.4 10.7 10.8 10.7 10.8 13.0 13.0 13.0 13.0 13.5 13.6 13.5 13.6 11.8 11.8 10.6 10.8 10.8 10.8 10.9 10.6 10.8 10.8 10.8 10.9 11.2 11.3 11.2 11.3

64cc 9.6 9.7 10.0 10.1 10.0 10.1 12.1 12.1 12.1 12.1 12.5 12.7 12.5 12.7 10.9 11.0 9.9 10.0 10.0 10.1 10.1 9.9 10.0 10.0 10.1 10.1 10.4 10.5 10.4 10.5

70cc 9.0 9.0 9.3 9.5 9.3 9.5 11.3 11.3 11.3 11.3 11.7 11.9 11.7 11.9 10.2 10.3 9.3 9.4 9.4 9.4 9.5 9.3 9.4 9.4 9.4 9.5 9.7 9.8 9.7 9.8

435 436 437 438 439 402 403 404 404 405 406 407

58cc 11.5 11.5 11.5 11.5 11.5 10.8 10.8 10.8 10.8 10.8 10.8 10.8

64cc 10.7 10.7 10.7 10.7 10.7 10.0 10.0 10.0 10.0 10.0 10.1 10.1

70cc 10.0 10.0 10.0 10.0 10.0 9.4 9.4 9.4 9.4 9.4 9.4 9.4

384 388 391 395

58cc 9.6 9.7 9.7 9.7

64cc 9.0 9.1 9.1 9.2

70cc 8.5 8.6 8.6 8.6

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

332 4.030 3.250 5.400 1.165 0.927 -6.5cc 333 4.040 347 4.125 353 4.155 347 4.125 353 4.155 426 4.030 4.170 6.250 1.165 0.927 -6.5cc 428 4.040 426 4.030 428 4.040 446 4.125 452 4.155 446 4.125 452 4.155 383 4.030 3.750 6.200 1.125 0.927 -6.5cc 385 4.040 342 4.000 3.400 5.400 1.090R 0.927 -6.5cc 347 4.030 348 4.035 349 4.040 352 4.060 342 4.000 1.090 347 4.030 348 4.035 349 4.040 352 4.060 364 4.125 1.090R 369 4.155 364 4.125 1.090 369 4.155 Compression Heights with "R" INCLUDE Oil Support Rails *Available In Multiple Alloys SMALL BLOCK FORD SEALED RACE ENGINES 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

374 4.125 3.500 6.200 1.245 0.927 -6.5cc 375 4.128 375 4.130 375 4.132 376 4.135 347 4.030 3.400 5.400 1.090 0.927 -6.5cc 347 4.032 348 4.035 348 4.037 349 4.040 349 4.042 350 4.045 * 8.2" Deck Height, for FRPD347SR and S347JR ** 9.2" Deck Height, for FRP S374W

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.500

0.0025 0.0033

SBF165030F06 SBF165040F06

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

930244530 930244540 930245525 930245555 930244625 930244655 930245430 930245440 930244530 930244540 930245525 930245555 930244625 930244655 930173130 930173140 930245700 930245730 930245735 930245740 930245760 930244700 930244730 930244735 930244740 930244760 930245825 930245855 930244825 930244855

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

928905930 928905940 928905950 928905960

2618

0.250

0.0061 0.0069

197722725 197722730 197722735

930244425 930244428 930244430 930244432 930244435 930244730 930244732 930244735 930244737 930244740 930244742 930244745

* * SBF165125F06 SBF165155F06 * * SBF165030F06 SBF165040F06 * * SBF165125F06 SBF165155F06

* * * * * SBF090000F06 SBF090030F06 SBF090035F06 SBF090040F06 SBF090060F06 * * SBF090125F06 SBF090155F06

** SBF245125F06 ** SBF245128F06 ** SBF245130F06 ** SBF245132F06 ** SBF245135F06 * SBF090030F06 * SBF090032F06 * SBF090035F06 * SBF090037F06 * SBF090040F06 * SBF090042F06 * SBF090045F06

SMALL BLOCK FORD WISSOTA CONCEPT PISTON 1.5, 1.5, 3.0mm File Fit Performance Ring Set Included APPROVED PN w/ Laser Etch for WISSOTA Series

347 4.030 3.400 5.400 1.090R 0.927 -16.0cc 349 4.040 350 4.050 352 4.060 Compression Heights with "R" INCLUDE Oil Support Rails

SBF090030I16 SBF090040I16 SBF090050I16 SBF090060I16

SMALL BLOCK FORD FLAT TOP TransAm TA2 Homologation Gasported PowerPak Plus Incremental bore sizes available by special order 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

374 375 376

4.125 4.130 4.135

3.500

6.250

1.245 0.927 -6.5cc

447 449 450

64cc 10.5 10.5 10.5

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt. "Min" and "Max" is the suggested range of clearance over the coating for each application. Compression Ratio calculated at zero deck and 0.040" gasket unless otherwise noted

2019 | 13 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

SMALL BLOCK FORD DOME 461 446

58cc 12.4 13.0

64cc 11.4 11.9

70cc 10.5 11.0

481 486 469 473 431 435 418 422 446 433 418 429 434 438 422 426 448 435 418 429 434 420 422 426 448 435 421 425 409 413 411 415 399 403 422 433 410 421 411 415 399 403 422 433 410 421 395 398 405 384 387 394 407 395

58cc 9.7 9.8 9.7 9.8 10.7 10.7 10.7 10.7 9.9 9.9 11.5 11.6 10.1 10.1 10.1 10.1 10.4 10.4 11.7 11.9 10.3 10.3 10.3 10.3 10.7 10.7 10.7 10.7 10.7 10.7 9.2 9.3 9.2 9.3 9.6 9.7 9.6 9.7 11.6 11.6 11.6 11.6 12.0 12.2 12.0 12.2 9.6 9.7 9.7 9.6 9.7 9.7 10.0 10.0

64cc 9.2 9.2 9.2 9.2 10.1 10.1 10.1 10.1 9.3 9.3 10.8 10.9 9.5 9.5 9.5 9.5 9.9 9.9 11.0 11.1 9.7 9.8 9.7 9.8 10.1 10.1 10.1 10.1 10.1 10.1 8.7 8.7 8.7 8.7 9.0 9.1 9.0 9.1 10.9 10.9 10.9 10.9 11.3 11.4 11.3 11.4 9.0 9.1 9.2 9.0 9.1 9.2 9.4 9.4

70cc 8.7 8.7 8.7 8.7 9.5 9.5 9.5 9.5 8.9 8.9 10.1 10.3 9.0 9.0 9.0 9.0 9.4 9.4 10.4 10.5 9.2 9.2 9.2 9.2 9.6 9.6 9.5 9.5 9.5 9.5 8.2 8.2 8.2 8.2 8.5 8.6 8.5 8.6 10.2 10.3 10.2 10.3 10.6 10.8 10.6 10.8 8.5 8.6 8.6 8.5 8.6 8.6 8.9 8.9

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

332 4.030 3.250 5.400 1.165 0.927 7.0cc 347 4.030 3.400 5.400 1.090R 0.927 7.0cc Compression Heights with "R" INCLUDE Oil Support Rails SMALL BLOCK FORD INVERTED DOME 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

393 4.030 3.850 5.956 1.600 0.912 -26cc 395 4.040 393 4.030 395 4.040 408 4.030 4.000 6.200 1.300 0.927 -20cc 410 4.040 408 4.030 410 4.040 408 4.030 -28cc 408 4.030 428 4.125 4.000 6.250 1.245 0.927 -17cc 434 4.155 408 4.030 -26cc 410 4.040 408 4.030 410 4.040 428 4.125 428 4.125 438 4.125 4.100 6.200 1.245 0.927 -17cc 445 4.155 418 4.030 -26cc 420 4.040 418 4.030 420 4.040 438 4.125 438 4.125 408 4.030 4.000 6.250 1.230 0.927 -20cc 410 4.040 408 4.030 410 4.040 332 4.030 3.250 5.400 1.165 0.927 -16cc 333 4.040 332 4.030 333 4.040 347 4.125 353 4.155 347 4.125 353 4.155 426 4.030 4.170 6.250 1.165 0.927 -16cc 428 4.040 426 4.030 428 4.040 446 4.125 452 4.155 446 4.125 452 4.155 347 4.030 3.400 5.400 1.090R 0.927 -16cc 349 4.040 352 4.060 347 4.030 349 4.040 352 4.060 364 4.125 364 4.125 Compression Heights with "R" INCLUDE Oil Support Rails *Available In Multiple Alloys

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

2618 2618

0.500 0.500

0.0046 0.0054 0.0046 0.0054

930247030 930247130

SBF165030D07 SBF090030D07

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618 4032 4032

0.500 0.500 0.500

0.0046 0.0054 0.0025 0.0033 0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618 4032 4032

0.500 0.500 0.500

0.0046 0.0054 0.0025 0.0033 0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618 4032 2618

0.500 0.500 0.500

0.0046 0.0054 0.0025 0.0033 0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618 4032

0.500 0.500

0.0046 0.0054 0.0025 0.0033

930249230 930249240 930248130 930248140 930249330 930249340 930248230 930248240 930249430 930248330 930248625 930248655 930249530 930249540 930248430 930248440 930249625 930248525 930248625 930248655 930249530 930249540 930248430 930248440 930249625 930248525 930249730 930249740 930248730 930248740 930249930 930249940 930248830 930248840 930247725 930247755 930245025 930245055 930249930 930249940 930248830 930248840 930247725 930247755 930245025 930245055 930247830 930247840 930247860 930249130 930249140 930249160 930247925 930249025

* * SBF600030I26 SBF600040I26 * * SBF300030I20 SBF300040I20 * SBF300030I28

* * SBF245030I26 SBF245040I26 * SBF245125I26

* * SBF245030I26 SBF245040I26 * SBF245125I26 * * SBF230030I20 SBF230040I20 * * SBF165030I16 SBF165040I16 * * SBF165125I16 SBF125155I16 * * SBF165030I16 SBF165040I16 * * SBF165125I16 SBF125155I16 * * * SBF090030I16 SBF090040I16 SBF090060I16 * SBF090125I16

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt. "Min" and "Max" is the suggested range of clearance over the coating for each application. Compression Ratio calculated at zero deck and 0.040" gasket unless otherwise noted

2019 | 14 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

SMALL BLOCK FORD FLAT TOP for the TWISTED WEDGE® CYL HEAD

61cc 10.0 10.1 10.0 10.0 10.4 10.4 10.4 10.4 10.8

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

332 4.030 3.250 5.400 1.165 0.927 -6.2cc 333 4.040 332 4.030 333 4.040 347 4.030 3.400 5.400 1.090R 0.927 -6.2cc 349 4.040 347 4.030 349 4.040 364 4.125 Compression Heights with "R" INCLUDE Oil Support Rails *Available In Multiple Alloys

451 455 438 442 436 440 425 429 462

SMALL BLOCK FORD INVERTED DOME for the TWISTED WEDGE® CYL HEAD 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

332 4.030 3.250 5.400 1.165 0.927 -16cc 333 4.040 332 4.030 333 4.040 347 4.030 3.400 5.400 1.090R 0.927 -16cc 349 4.040 347 4.030 349 4.040 364 4.125 -18cc Compression Heights with "R" INCLUDE Oil Support Rails *Available In Multiple Alloys

461 465 448 452 443 447 431 435 466

SMALL BLOCK FORD CLEVELAND 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

357 4.030 3.500 6.000 1.450 0.927 -3.2cc 357 4.030 393 4.030 3.850 6.000 1.275 0.927 -3.2cc 395 4.040 393 4.030 395 4.040 408 4.030 4.000 6.000 1.200R 0.927 -20cc 408 4.030 -3.2cc 408 4.030 1.200 -20cc 408 4.030 -3.2cc Compression Heights with "R" INCLUDE Oil Support Rails *Available In Multiple Alloys

502 487 478 482 464 468 469 464 457 453

60cc 11.2 11.2 12.2 12.3 12.2 12.3 10.5 12.7 10.5 12.7

61cc 9.0 9.0 9.0 9.0 9.3 9.4 9.3 9.4 9.5

64cc 10.7 10.7 11.7 11.7 11.7 11.7 10.1 12.1 10.1 12.1

72cc 9.8 9.8 10.6 10.7 10.6 10.7 9.3 11.0 9.3 11.0

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

2618

0.500

0.0046 0.0054

* *

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

930250730 930250740 930250130 930250140 930250530 930250540 930250330 930250340 930250425

2618

0.500

0.0046 0.0054

* *

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

930251330 930251340 930251030 930251040 930251530 930251540 930251130 930251140 930251625

2618 4032 2618

0.500 0.500 0.500

0.0046 0.0054 0.0025 0.0033 0.0046 0.0054

*

4032

0.500

0.0025 0.0033

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

930253230 930252030 930252830 930252840 930252130 930252140 930252930 930253130 930252430 930252630

TWF165030F06 TWF165040F06 * * TWF090030F06 TWF090040F06 * TWF090125F06

TWF165030I16 TWF165040I16 * * TWF090030I16 TWF090040I16 *

FCL450030F03 * * FCL275030F03 FCL275040F03 * * FCL200030I20 FCL200030F03

FORD MODULAR 4.6 2-VALVE or 4-VALVE

42cc 46cc 52cc 9.9 9.4 8.7 M142P 0.500 0.0006 0.0014 930256052 MOD220551I16 281 3.552 3.543 5.930 1.220 0.866 -16.0cc 356 284 3.572 363 10.0 9.5 8.8 930256072 MOD220571I16 285 3.582 367 10.1 9.5 8.8 930256082 MOD220581I16 284 3.572 -22.0cc 374 9.2 8.8 8.2 2618 0.500 0.0025 0.0033 930256172 * MOD220571P22 281 3.552 0cc 392 12.9 12.0 10.8 M142P 0.500 0.0006 0.0014 930256252 MOD220551F00 284 3.572 399 13.0 12.1 10.9 930256272 MOD220571F00 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications; for Use with Aftermarket Rods Only

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

NHRA LEGAL FORD MODULAR 5.4L 4-VALVE (2008, 2010, 2012 COBRA JET) Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech; NHRA PN 197740100 1.5mm, 1.5mm, 2.5mm Ring Grooves (rings not included)

330 3.552 4.165 6.657 1.230 0.866 -12.6cc 334 3.572 343 3.622 *Hard Anodized Top Ring Groove For Extreme Duty Applications

364 371 389

Dependent upon bore size

M142P

0.500

0.0060 0.0014

197740100 * 197740100 * 197740100 *

0.500

0.0006 0.0014

0.500 0.500

0.0025 0.0033 0.0006 0.0014

930256052 MOD220551I16 930256072 MOD220571I16 930256082 MOD220581I16 930256172 * MOD220571P22 930256252 MOD220551F00 930256272 MOD220571F00

FORD MODULAR 5.4 2-VALVE or 4 VALVE 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

42cc 46cc 52cc 9.1 8.7 8.2 M142P 330 3.552 4.165 6.657 1.220 0.866 -16.0cc 356 334 3.572 363 9.1 8.8 8.3 336 3.582 367 9.2 8.8 8.3 334 3.572 -22.0cc 374 8.6 8.3 7.8 2618 330 3.552 0cc 392 11.0 10.4 9.7 M142P 334 3.572 399 11.1 10.5 9.8 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

CR calculated at 0.118" below deck and 0.040" head gasket thickness

2019 | 15 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

0.250

0.0025 0.0033

930258130 * 930258140 *

0.250

0.0006 0.0014

0.250

0.0006 0.0014

0.250

0.0025 0.0033

930258030 930258040 930134030 930134040 930258230 930258240

FORD 5.0L MODULAR 4-VALVE COYOTE

57cc 302 3.630 3.650 5.933 1.167 0.866 10.2cc 397 12.6 2618 304 3.640 400 12.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

FORD 5.0L MODULAR 4-VALVE COYOTE / VOODOO (Combined Dome/Pocket Geometry) 57cc 302 3.630 3.650 5.933 1.167 0.866 3.0cc 389 11.2 M142P 304 3.640 392 11.2 302 3.630 -4.5cc 383 10.1 M142P 304 3.640 386 10.1 302 3.630 -13.1cc 359 9.1 2618 304 3.640 362 9.1 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications. **Hard Anodized Top Ring Groove for Extreme Duty Applications

1.0mm, 1.0mm, 2.0mm File Fit Performance Ring Set Included

** ** ** M4V167630I05 ** M4V167640I05 * *

FORD 5.0L MODULAR COYOTE Gen 3 Direct Injected (2018+) DROP-IN FORGED REPLACEMENT ASSEMBLY NO BALANCING, NO COMP RATIO CHANGE Uses OE-style rings for PTWA bores and includes DLC wrist pins

59cc 308 3.662 3.650 5.933 1.167 0.866 8.4cc 373 12.0 2618 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

1.2mm, 1.2mm, 2.0mm File Fit Performance Ring Set Included

0.250

0.0025 0.0033

930258362 *

0.500

0.0025 0.0033

197736230 197736250 197736200 197736202 197736205 197736207 197736210

* * * * * * *

0.500

0.0016 0.0023

930049930 930049950 930049900 930049902 930049905 930049907 930049910

* * * * * * *

4032

0.500

0.0016 0.0023

4032

0.500

0.0016 0.0023

4032

0.500

0.0016 0.0023

930074712 930074742 930074775 930074812 930074842 930074875 930074912 930074942 930074975

4032 4032 4032

0.500 0.500 0.250

0.0041 0.0049 0.0041 0.0049 0.0041 0.0049

NHRA LEGAL FORD 5.0L MODULAR 4-VALVE (2014, 2015 COBRA JET) Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech; NHRA PN 197736200

57cc 302 3.630 3.650 5.933 1.167 0.866 -8.8cc 350 9.5 2618 306 3.650 356 9.6 314 3.700 372 9.8 314 3.702 373 9.8 315 3.705 374 9.8 315 3.707 374 9.9 316 3.710 375 9.9 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

1.2mm, 1.2mm, 2.5mm Ring Grooves (rings not included)

NHRA LEGAL FORD 5.0L MODULAR 4-VALVE (2016 COBRA JET) Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech; NHRA PN 930049900

57cc 302 3.630 3.650 5.933 1.167 0.866 7.3cc 377 12.0 2618 306 3.650 384 12.1 314 3.700 400 12.3 314 3.702 401 12.3 315 3.705 402 12.4 315 3.707 402 12.4 316 3.710 403 12.4 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

1.2mm, 1.2mm, 2.5mm Ring Grooves (rings not included)

FORD FLATHEAD - 3/16" STANDARD DOME 1/16, 1/16, 3/16 Performance Ring Set included Compression ratio calculated with 14cc gasket volume.

276 3.312 4.000 7.000 1.438 0.750 12.8cc 281 3.342 286 3.375 284 3.312 4.125 7.000 1.375 0.750 12.8cc 290 3.342 295 3.375 293 3.312 4.250 7.000 1.313 0.750 12.8cc 298 3.342 304 3.375 Top ring land is .280" tall to accomodate relieved blocks

338 348 359 324 333 344 310 320 330

BIG BLOCK FORD for the KAASE BOSS NINE® CYLINDER HEAD File Fit Performance Ring Set included (see notes)

521 545 545

4.390 4.390 4.390

4.300 4.500

6.800 6.700

1.345 0.990 -8.6cc 1.345 0.990 -8.6cc -19.2cc

615 615 600

65cc 8.9 9.0 9.1 9.1 9.2 9.4 9.4 9.5 9.6

74cc 8.0 8.1 8.2 8.2 8.3 8.5 8.4 8.5 8.7

84cc 11.4 11.9 10.9

90cc 10.8 11.3 10.4

FFH438312D13 FFH438342D13 FFH438375D13 FFH375312D13 FFH375342D13 FFH375375D13 FFH313312D13 FFH313342D13 FFH313375D13

930022790 * KB9345390F08 930022790 * KB9345390F08 930190990 **

*1/16, 1/16, 3/16 rings **1.5, 1.5, 3.0mm rings

Meas. = The location to measure piston-to-wall clearance, referenced from the bottom of the piston skirt. "Min" and "Max" is the suggested range of clearance over the coating for each application. Compression Ratio calculated at zero deck and 0.040" gasket unless otherwise noted

2019 | 16 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

BIG BLOCK FORD

Compression Ratio 80cc 12.0 12.3 9.7 9.9 12.4 12.7 9.3 9.5 13.0 13.2 9.7 9.9

84cc 11.6 11.8 9.4 9.6 12.0 12.2 9.1 9.3 12.5 12.7 9.5 9.6

BIG BLOCK FORD for the SCJ, KAASE P-51®, AFR 14° BULLIT CYLINDER HEADS 72cc 80cc 503 4.390 4.150 6.700 1.525 0.990 -4.1cc 567 13.0 11.9 514 4.440 590 13.2 12.2 503 4.390 -28cc 533 10.4 9.7 514 4.440 556 10.6 9.9 521 4.390 4.300 6.800 1.350 0.990 -4.1cc 540 13.4 12.3 533 4.440 562 13.6 12.6 521 4.390 -38cc 507 9.9 9.3 533 4.440 529 10.1 9.5 545 4.390 4.500 6.700 1.350 0.990 -4.1cc 540 14.0 12.9 557 4.440 562 14.2 13.1 545 4.390 -38cc 507 10.3 9.7 557 4.440 529 10.5 9.9

84cc 11.5 11.7 9.4 9.6 11.9 12.1 9.1 9.3 12.4 12.6 9.5 9.6

1.5, 1.5, 3.0mm File Fit Performance Ring Set included

503 514 503 514 521 533 521 533 545 557 545 557

4.390 4.440 4.390 4.440 4.390 4.440 4.390 4.440 4.390 4.440 4.390 4.440

4.150

6.700

1.525 0.990 -3.3cc -28cc

4.300

6.800

1.350 0.990 -3.3cc -38cc

4.500

6.700

1.350 0.990

-3cc -38cc

569 592 533 556 542 564 507 529 542 564 507 529

72cc 13.1 13.3 10.4 10.6 13.5 13.8 9.9 10.1 14.1 14.4 10.3 10.5

1.5, 1.5, 3.0mm File Fit Performance Ring Set included

FORD FE FLAT TOP 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

416 431 434 445 447 449 462 464 467 482 487 489

4.080 4.080 4.090 4.080 4.090 4.100 4.160 4.170 4.180 4.250 4.270 4.280

3.980 4.125

6.490 6.700

1.665 0.975 -7.5cc 1.390 0.990 -7.5cc

4.250

6.700

1.325 0.990 -7.4cc

-8.8cc

516 483 487 473 477 481 505 509 513 498 506 510

FORD FE DISH 4.080 4.090 4.080 4.090 4.100 4.160 4.170 4.180 4.250 4.270 4.280 4.080 4.090 4.100 4.160

72cc 9.3 9.3 10.2 10.3 10.3 10.4 10.4 10.5 10.8 10.8 10.9 9.4 9.4 9.4 9.3

76cc 9.0 9.0 9.9 9.9 10.0 10.0 10.1 10.1 10.4 10.5 10.5 9.1 9.1 9.2 9.0

65cc 9.9 10.5 10.5 11.6 11.6 11.8

70cc 9.4 9.9 10.0 11.0 11.0 11.1

1.390 0.990

-26cc

511

4.250

6.700

1.325 0.990

-18cc

491 496 500 519 523 527 519 527 531 495 499 503 530

68cc 9.6 9.7 10.6 10.7 10.7 10.8 10.8 10.9 11.2 11.2 11.3 9.7 9.7 9.8 9.6

512 480 484 454 458 470

60cc 10.5 11.1 11.2 12.3 12.4 12.5

-20cc

-28cc

-33cc

SMALL BLOCK MOPAR FLAT TOP 4.070 4.030 4.040 4.030 4.040 4.070

76cc 10.3 10.6 10.6 10.9 10.9 11.0 11.2 11.3 11.3 11.5 11.6 11.6

6.700

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

345 365 367 408 410 416

72cc 10.7 11.0 11.1 11.3 11.4 11.4 11.7 11.8 11.8 12.0 12.1 12.1

4.125

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

431 433 445 447 449 462 464 467 482 487 489 445 447 449 462

68cc 11.1 11.5 11.6 11.8 11.9 11.9 12.2 12.3 12.3 12.5 12.6 12.6

3.313 3.580

6.123 6.123

1.804 0.984 -5.5cc 1.670 0.984 -5.5cc

4.000

6.123

1.460 0.984 -5.5cc

2019 | 17 Phone: 1300 350 351

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

2618

0.500

0.0055 0.0063

4032

0.500

0.0041 0.0049

2618

0.500

0.0055 0.0063

4032

0.500

0.0041 0.0049

2618

0.500

0.0055 0.0063

4032

0.500

0.0041 0.0049

930261590 930261540 930246490 930246440 930261690 930261640 930245690 930245640 930261690 930261640 930245690 930245640

BBF525390F03 BBF525440F03 BBF525390I28 BBF525440I28 BBF350390F03 BBF350440F03 BBF350390I38 BBF350440I38 BBF350390F03 BBF350440F03 BBF350390I38 BBF350440I38

2618

0.500

0.0055 0.0063

4032

0.500

0.0041 0.0049

2618

0.500

0.0055 0.0063

4032

0.500

0.0041 0.0049

2618

0.500

0.0055 0.0063

4032

0.500

0.0041 0.0049

4032 4032

0.500 0.500

0.0025 0.0033 0.0025 0.0033

4032

0.500

0.0025 0.0033

4032

0.500

0.0041 0.0049

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

4032

0.500

0.0041 0.0049

4032

0.500

0.0025 0.0033

4032

0.500

0.0025 0.0033

4032 4032

0.500 0.500

0.0025 0.0033 0.0025 0.0033

4032

0.500

0.0025 0.0033

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

930261790 930261740 930261990 930261940 930261890 930261840 930245690 930245640 930261890 930261840 930245690 930245640

BBF350390I38 BBF350440I38

930264080 930264280 930264290 930264680 930264690 930264600 930265160 930265170 930265180 930266050 930266070 930266080

FFE665080F07 FFE390080F07 FFE390090F07 FFE325080F07 FFE325090F07 FFE325100F07 FFE325160F07 FFE325170F07 FFE325180F07 FFE325250F09 FFE325270F09 FFE325280F09

930264180 930264190 930264480 930264490 930264400 930265060 930265070 930265080 930264550 930264570 930264580 930264980 930264990 930264900 930264360

FFE390080I26 FFE390090I26 FFE325080I20

930270070 930270130 930270140 930270230 930270240 930270270

SBM804070F05 SBM670030F05 SBM670040F05 SBM460030F05 SBM460040F05 SBM460070F05

BBF350390I38 BBF350440I38

FFE325250I20 FFE325270I20 FFE325280I20

FFE325160I33

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

SMALL BLOCK MOPAR DISH 487 492 505 480 484 492

60cc 9.7 9.7 9.8 10.9 11.0 11.0

65cc 9.2 9.3 9.4 10.4 10.4 10.5

70cc 8.9 8.9 9.0 9.9 9.9 10.0

457 466

72cc 12.2 12.4

80cc 11.3 11.4

84cc 10.9 11.0

608 580 592 519 530 509 500 510

72cc 11.2 12.2 12.4 12.5 12.6 12.9 13.2 13.3

80cc 10.3 11.3 11.4 11.6 11.7 11.9 12.2 12.3

84cc 10.0 10.9 11.0 11.2 11.3 11.5 11.8 11.9

405 408 411 426 432

74cc 10.5 10.6 10.6 11.6 11.7

85cc 9.4 9.5 9.5 10.2 10.3

1.0, 1.0, 2.0mm File Fit Performance Ring Set included

408 410 416 408 410 414

4.030 4.040 4.070 4.030 4.040 4.060

4.000

6.123

1.460 0.984

-28cc

4.000

6.123

1.460 0.984

-16cc

BIG BLOCK MOPAR (B) / 383, 400 Flat Top 1.5, 1.5, 3.0mm File Fit Performance Ring Set included

493 4.350 4.150 6.760 1.120R 0.990 -8.1cc 499 4.375 Compression Heights with "R" INCLUDE Oil Support Rails BIG BLOCK MOPAR (RB) / 426, 440 Flat Top 1.5, 1.5, 3.0mm File Fit Performance Ring Set included

446 493 499 505 511 520 535 541

4.350 4.350 4.375 4.350 4.375 4.350 4.350 4.375

3.750 4.150

6.760 6.760

2.065 0.990 -8.1cc 1.865 0.990 -8.1cc

4.250

7.100

1.475 0.990 -8.1cc

4.375 4.500

7.100 7.100

1.412 0.990 -8.1cc 1.350 0.990 -8.1cc

HEMI 5.7L Stroker 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

392 3.927 4.050 6.125 1.095R 0.927 -2.2cc 394 3.937 396 3.947 392 3.927 6cc 396 3.947 Compression Heights with "R" INCLUDE Oil Support Rails

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

2618

0.500

0.0046 0.0054

4032

0.500

0.0025 0.0033

930271130 930271140 930271170 930271030 930271040 930271060

SBM460030I28 SBM460040I28 SBM460070I28 SBM460030I16 SBM460040I16 SBM460060I16

4032

0.350

0.0041 0.0049

929962250 929962275

BBM120350F08 BBM120375F08

4032 4032

0.350 0.350

0.0041 0.0049 0.0041 0.0049

4032

0.350

0.0041 0.0049

4032 4032

0.350 0.350

0.0041 0.0049 0.0041 0.0049

929962750 929962650 929962675 929962550 929962575 929962450 929962350 929962375

BBM065350F08 BBM865350F08 BBM865375F08 BBM475350F08 BBM475375F08 BBM412350F08 BBM350350F08 BBM350375F08

4032

0.250

0.0025 0.0033

4032

0.250

0.0025 0.0033

930276227 930276237 930276247 930276327 930276347

HMI095927F02 HMI095937F02 HMI095947F02 HMI095927D06 HMI095947D06

4032

0.250

0.0025 0.0033

930111655 *

2618

0.250

0.0046 0.0054

4032

0.250

0.0025 0.0033

930277855 930277860 930277655 930277660

4032

0.250

0.0025 0.0033

930277565 * HMI095065I12 930277580 * HMI095080I12 930277590 * HMI095090I12

0.250 0.250

0.0046 0.0054 0.0025 0.0033

9299871 * 197729300 ** 197729300 **

HEMI 6.1L DROP-IN FORGED REPLACMENT ASSEMBLY NO BALANCING, NO COMP RATIO CHANGE Also works with 6.4L CYLINDER HEAD 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

441

74cc 10.4

450 452 441 442

74cc 10.1 10.1 10.1 10.1

422 427 431

74cc 10.1 10.2 10.2

CR calculated at 0.013" above deck and 0.041" head gasket thickness

370 4.055 3.580 6.242 1.220 0.984 -1cc *Hard Anodized Top Ring Groove For Extreme Duty Applications HEMI 6.1L Also works with 6.4L CYLINDER HEAD 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

370 4.055 3.580 6.242 1.220 0.984 -1cc 371 4.060 370 4.055 -1cc 371 4.060 *Hard Anodized Top Ring Groove For Extreme Duty Applications *Available In Multiple Alloys

* * * *

930277755 930277760 HMI220055F01 HMI220060F01

HEMI 6.1L Stroker Also works with 6.4L CYLINDER HEAD 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

420 4.065 4.050 6.125 1.095R 0.927 -12cc 424 4.080 426 4.090 Compression Heights with "R" INCLUDE Oil Support Rails *Hard Anodized Top Ring Groove For Extreme Duty Applications NHRA LEGAL 6.1L HEMI

Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech

74cc Dependent Upon Bore Size 2618 370 4.055 3.580 6.200 1.262 0.927 10.5cc 524 Dependent Upon Bore Size 4032 370 4.055 6.242 1.220 0.984 -1cc 426 371 4.060 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications **Hard Anodized Top Ring Groove For Extreme Duty Applications

1.5, 1.5, 3.0mm Performance Ring Set included

2019 | 18 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Cubic Bore Inches

Stroke

Rod

Comp Pin Crown Height Diam. Vol

Wght G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.250

0.0025 0.0033

930279090 * HMI210090D04 930279095 * 930279000 *

4032

0.250

0.0025 0.0033

197729200 *

4032

0.500

0.0025 0.0033

197815365 197815300 197816355

4032

0.500

0.0025 0.0033

930274555 930274585

BBO260155I22 BBO260185I22

4032

0.250

0.0025 0.0033

4032

0.250

0.0025 0.0033

930275055 930275085 930275155 930275185

BBP285155F06 BBP285185F06 BBP160155F06 BBP160185F06

HEMI 6.4L DROP-IN FORGED REPLACMENT ASSEMBLY NO BALANCING, NO COMP RATIO CHANGE 1.0, 1.0, 2.0mm File Fit Performance Ring Set included CR calculated at 0.01" below deck and 0.035" head gasket thickness

3.724 6.200 1.211 0.945 3.6cc 392 4.090 392 4.095 393 4.100 *Hard Anodized Top Ring Groove For Extreme Duty Applications

74cc 11.0 11.0 11.0

444 445 447

NHRA LEGAL 6.4L HEMI Available in bore sizes up to the legal NHRA limit of +0.080" oversize; call for sizes/other tech

74cc

1.2mm, 1.2mm, 2.0mm Drop-in Rings included

392 4.091 3.724 6.200 1.211 0.945 3.6cc *Hard Anodized Top Ring Groove For Extreme Duty Applications

444

Dependent Upon Bore Size

SMALL BLOCK OLDSMOBILE 350 FLAT TOP Note: 0.984" Pin Ă˜ requires stock 0.980" rod to be honed 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

502 520 521

65cc 9.6 9.7 10.0

70cc 9.1 9.2 9.5

79cc 8.4 8.5 8.7

491 503

72cc 10.7 10.8

80cc 10.0 10.1

84cc 9.7 9.8

529 542 506 517

72cc 11.8 12.0 12.5 12.6

80cc 10.9 11.0 11.5 11.6

84cc 10.5 10.6 11.1 11.2

CR calculated at 0.013" below deck and 0.027" head gasket thickness

351 358 367

4.065 4.100 4.155

3.385

6.000

1.625 0.984 -10.2cc -10.1cc

BIG BLOCK OLDSMOBILE 455 Stroker DISH 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

488 495

4.155 4.185

4.500

7.100

1.260 0.990 -22.0cc

BIG BLOCK PONTIAC 455 Stroker FLAT TOP 1.0, 1.0, 2.0mm File Fit Performance Ring Set included

461 468 488 495

4.155 4.185 4.155 4.185

4.250

6.800

1.285 0.990 -6.4cc

4.500

6.800

1.160 0.990 -6.4cc

Important Notice It is very important and critical for sustained durability that the round wire locks are properly seated in the lock groove of the piston The following is the recommended procedure for proper seating After placing the first round wire lock in the groove (caution do not collapse the lock using pliers, but gently work the lock into the groove with a blunt edge tool) place the piston pin in the piston and gently tap the piston pin against the installed wire lock using a wooden or plastic dowel. Upon final assembly of piston, pin, connecting rod, and remaining locks - repeat the seating process on the newly installed lock.

2019 | 19 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Bore

Stroke

Rod

Comp Height

Pin Crown Wght Diam. Vol G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.236 0.0016 0.0024

4032 4032

0.236 0.0016 0.0024 0.236 0.0016 0.0024

929116289 929116209 929112109 929114789 929114799 929114709

ACR181189I08 ACR181209I08 ACR181209F01 ACR181189D09 ACR181199D09 ACR181209D09

4032

0.236 0.0016 0.0024

4032

0.236 0.0016 0.0024

4032

0.236 0.0016 0.0024

930024125 930024135

ACR181425D04 ACR181435D04

M142P 0.385 0.0008 0.0016

930067351

MCP122051D01

SPORT COMPACT ACURA B18C1 DOHC VTEC 1.8L 1.0, 1.2, 2.8mm Performance Ring Set Included

274 277 290 306 309 312

41cc 8.9 9.0 10.5 12.3 12.3 12.4

278 284 290 329 333 338

51cc 8.8 8.9 9.0 12.6 12.8 12.9

4.3cc

320 321

51cc 12.4 12.4

20mm -1.1cc

273

Stock 10.3

CR calculated at 0.89mm below deck and 0.66mm head gasket thickness

81.00mm 81.50mm 81.50mm 81.00mm 81.25mm 81.50mm

87.2mm

137.9mm

30mm

21mm -8.0cc 1.0cc 9.1cc

ACURA RSX K20 2.0L 1.2, 1.2, 2.8mm Performance Ring Set Included CR calculated at zero deck and 0.64mm head gasket thickness

86.00mm 86mm 139mm 30mm 86.50mm 87.00mm 86.00mm 86.50mm 87.00mm *Also suitable for K24 w/ K20 cylinder head

22mm -9.0cc

11.8cc

929172586 ACR181386I09 929172505 ACR181405I09 929172525 * ACR181425I09 929170986 ACR181386D12 929170905 ACR181405D12 929170925 * ACR181425D12

ACURA K24 2.4L 1.2, 1.2, 2.8mm Performance Ring Set Included CR calculated at 0.2mm below deck and 0.64mm head gasket thickness

87.00mm 87.25mm

99.0mm

152.0mm

30mm

22mm

BMW MINI COOPER S PRINCE 2007- Current 1.6L 1.0, 1.2, 2.8mm Performance Ring Set Included

77.50mm

85.8mm

138.2mm

28.5mm

BMW S52 B32 3.2L E36 M3 1.2, 1.2, 2.8mm Performance Ring Set Included

35.2cc 86.60mm 89.6mm 135mm 31mm 22mm -25.0cc 304 9.0 86.60mm -11.0cc 324 11.2 86.60mm -5.0cc 342 12.5 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications **Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.8mm above deck and 1.73mm head gasket thickness

2618 4032 4032

0.395 0.0016 0.0024 0.395 0.0006 0.0014 0.395 0.0006 0.0014

930024709 * S52220409P25* 930024409 * S52220409P11** 930024609 * S52220409P05**

2618 2618

0.250 0.0020 0.0028 0.250 0.0020 0.0028

930000045 * S54271445P29* 930000145 * S54271445T09*

4032

0.250 0.0010 0.0018

197843112

4032

0.500 0.0010 0.0018

4032

0.500 0.0010 0.0018

197843322 197843342 197843622 197843642

2618 2618

0.250 0.0025 0.0033 0.250 0.0025 0.0033

BMW S54 B32 3.2L E46 M3 1.2, 1.2, 2.8mm Performance Ring Set Included

33cc 87.50mm 91.0mm 139mm 32.3mm 21mm -29.0cc 334 9.1 87.50mm -9.0cc 357 12.5 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.25mm below deck and 0.69mm head gasket thickness

BMW M54 B30 3.0L E46 (0.005" oversize) 304

Stock 10.5

366 372 366 372

51cc 10.1 10.2 12.2 12.3

1.2, 1.5, 2.0mm Performance Ring Set Included

84.127mm

89.6mm

135mm

28.32mm 22mm

0cc

BMW S65 B40 4.0L (also available for S85, call for PN) 1.2, 1.2, 2.5mm Performance Ring Set Included CR calculated at 0.28mm below deck and 0.59mm head gasket thickness

92.00mm 75.2mm 140.7mm 27.3mm 21mm 2.1cc 92.50mm 92.00mm 12.2cc 92.50mm *Hard Anodized Top Ring Groove For Extreme Duty Applications

* * * *

BMW N54 B30 3.0L 1.0, 1.2, 2.8mm Performance Ring Set Included

34cc 84.00mm 89.6mm 145.05mm 31.7mm 22mm -17.2cc 314 10.2 84.00mm -21.5cc 308 9.5 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.75mm above deck and 1.22mm head gasket thickness

2019 | 20 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

197832209 * 197841309 *

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Bore

Stroke

Rod

Comp Height

FORD ST EcoBoost 2.0L

Pin Crown Wght Diam. Vol G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

4032

0.250 0.0016 0.0024

2618

0.250 0.0021 0.0029

4032 2618

0.250 0.0016 0.0024 0.250 0.0021 0.0029

197713945 197713965 197729445 197729465 197714245 197714045

Old Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included

43cc 87.50mm 83.1mm 155.87mm 32.8mm 22.5m -7.0cc 354 9.3 88.00mm 361 9.4 87.50mm 83.1mm 155.87mm 32.8mm 22.5m -7.0cc 364 9.3 88.00mm 371 9.4 87.50mm 83.1mm 155.87mm 32.8mm 22.5m -2.3cc 348 10.0 87.50mm 83.1mm 155.87mm 32.8mm 22.5m 3.2cc 373 11.0 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications. **Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.78mm below deck and 5.78cc gasket volume

** ** * * ** *

FORD EcoBoost 2.3L 1.2, 1.2, 2.8mm Performance Ring Set Included

43cc 87.50mm 94.0mm 149.3mm 32.8mm 22.5m -6.5cc 355 9.5 2618 88.00mm 361 9.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications.

CR calculated at 1.9mm below deck and 5.78cc gasket volume

Ford BA XR6 for Australian Fords 4.0L 334 336 341 344 346 351

65cc 8.8 8.8 8.9 8.8 8.8 8.9

290 306 309 312

42cc 9.5 11.2 11.2 11.3

290 306 309 312

41cc 10.5 12.3 12.3 12.4

1.2, 1.2, 2.5mm Performance Ring Set Included

243 3.633 3.910 6.057 1.216 0.866 -13.6cc 244 3.637 246 3.652 243 3.633 -13.6cc 244 3.637 246 3.652 *PowerPak Plus 2618 Alloy for Extreme Duty Applications.

0.475 0.0021 0.0029

197755345 * 197755365 *

4032

0.355 0.0025 0.0033

2618

0.355 0.0031 0.0039

929984815 XR6216633I14 929984805 XR6216637I14 929984820 XR6216652I14 929966115 * XR6216633P14* 929966105 * XR6216637P14* 929966120 * XR6216652P14*

4032 4032

0.236 0.0016 0.0024 0.236 0.0016 0.0024

929112109 929114789 929114799 929114709

ACR181209F01 ACR181189D09 ACR181199D09 ACR181209D09

4032 4032

0.236 0.0016 0.0024 0.236 0.0016 0.0024

929112109 929114789 929114799 929114709

ACR181209F01 ACR181189D09 ACR181199D09 ACR181209D09

930081525 930081535 930082325 930083125 930083135

H22220425I07 H22220435I07 H22220425F01 H22220425D10 H22220435D10

929986125 929986129 929986135 929986425 929986435

* S2K181425X09** * S2K181429X09** * S2K181435X09** * S2K181425P11* * S2K181435P11*

HONDA B16, A1, A2, A3 DOHC VTEC 1.6L 1.0, 1.2, 2.8mm Performance Ring Set Included CR calculated at 0.55mm below deck and 0.66mm head gasket thickness

81.50mm 81.00mm 81.25mm 81.50mm

77.4mm

134mm

30mm

21mm

1.0cc 9.1cc

HONDA B18C1 DOHC VTEC 1.8L 1.0, 1.2, 2.8mm Performance Ring Set Included CR calculated at 0.89mm below deck and 0.66mm head gasket thickness

81.50mm 81.00mm 81.25mm 81.50mm

87.2mm

137.9mm

30mm

21mm

1.0cc 9.1cc

HONDA H22 GOLD SERIES 2.2L- FOR USE IN FACTORY FRM (FIBER REINFORCED MATRIX) CYLINDERS ONLY 1.2, 1.2, 2.8mm Performance Ring Set Included CR calculated at 0.15mm below deck and 0.66mm head gasket thickness

87.00mm 87.25mm 87.00mm 87.00mm 87.25mm

90.7mm

143mm

31mm

22mm -7.0cc -1.0cc 9.8cc

293 296 309 335 338

54cc 9.2 9.2 10.0 12.0 12.1

4032

0.236 0.0016 0.0024

4032 4032

0.236 0.0016 0.0024 0.236 0.0016 0.0024

HONDA S2000 F20C 2.0L GOLD SERIES - FOR USE IN FACTORY FRM (FIBER REINFORCED MATRIX) CYLINDERS ONLY 1.2, 1.2, 2.8mm Performance Ring Set Included, Designed for Aftermarket Rods

54cc 87.00mm 84.0mm 153mm 30mm 23mm 9.0cc 331 12.5 4032 87.10mm 332 12.5 87.25mm 334 12.5 87.00mm -11.0cc 303 8.9 2618 87.25mm 306 8.9 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications **Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 1.0mm above deck and 0.76mm head gasket thickness

2019 | 21 Phone: 1300 350 351

0.375 0.0006 0.0014

0.375 0.0016 0.0024

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Compression Comp Pin Crown Wght Alloy Clearance Guide Ratio Height Diam. Vol G Meas. Min Max HONDA S2000 F22C 2.2L GOLD SERIES - FOR USE IN FACTORY FRM (FIBER REINFORCED MATRIX) CYLINDERS ONLY Bore

Stroke

Rod

Current Part No.

Old Part No.

1.2, 1.2, 2.8mm Performance Ring Set Included, Designed for Aftermarket Rods

54cc 87.00mm 90.7mm 149.65mm 30mm 23mm 9.0cc 331 13.4 87.10mm 332 13.4 87.25mm 334 13.4 87.00mm -11.0cc 303 9.5 87.25mm 306 9.5 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications **Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 1.0mm above deck and 0.76mm head gasket thickness

HYUNDAI THETA L-4 TURBO 2.0L 86.0mm

0.375 0.0016 0.0024

* S2K181425X09** * S2K181429X09** * S2K181435X09** * S2K181425P11* * S2K181435P11*

50.5cc 8.5

2618

0.260 0.0025 0.0033

929960585

HYU181385I11

149.5mm 31.47mm 22mm -22.8cc

393

67cc 9.0

4032

0.235 0.0016 0.0024

929959680

HYU239780I23

0.250 0.0021 0.0029

197723845 197723865 197786145 197786165

30mm

HYUNDAI LAMBDA V-6 TURBO 3.8L 87.0mm

2618

929986125 929986129 929986135 929986425 929986435

300

146mm

1.2, 1.2, 2.8mm Performance Ring Set Included

96.00mm

0.375 0.0006 0.0014

22mm -11.4cc

1.2, 1.2, 2.8mm Performance Ring Set Included

86.00mm

4032

MAZDA MZR 2.3L DISI 1.2, 1.2, 2.8mm Performance Ring Set Included

44cc 87.50mm 9.5 2618 94.0mm 150.622mm 32.87mm 22.5mm -15.2cc 342 88.00mm 349 9.6 87.50mm 9.5 4032 94.0mm 150.622mm 32.87mm 22.5mm -15.2cc 334 88.00mm 340 9.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications. **Hard Anodized Top Ring Groove

CR calculated at 0.5mm below deck and 4.69cc gasket volume

0.250 0.0016 0.0024

* * ** **

MITSUBISHI 4G63 2.0L 88-92 ECLIPSE 1.2, 1.2, 2.8mm Performance Ring Set Included CR calculated at 0.3mm below deck and 1.3mm head gasket thickness

85.50mm 86.00mm

88.0mm

150mm

34.7mm

21mm -10.0cc

313 319

47cc 8.7 8.7

4032

0.236 0.0016 0.0024

929981966 929981986

MIT367366I10 MIT367385I10

4032

0.236 0.0016 0.0024

2618

0.236 0.0025 0.0033

2618

0.236 0.0025 0.0033

4032

0.236 0.0016 0.0024

2618

0.236 0.0025 0.0033

930130046 930130066 930130086 929925866 929925885 930143666 930143685 930131866 930131886 929990666 929990685

EVO367346I10 EVO367366I10 EVO367385I10 * EVO367366P10* * EVO367385P10* * EVO248366P14* * EVO248385P14* EVO130366I19 EVO130385I19 * EVO130366P19* * EVO130385P19*

2618

0.500 0.0025 0.0033

929945985 * EVO314385P05* 929945905 * EVO314405P05*

4032

0.236 0.0016 0.0024

930101105 930101125

NIS253405I12 NIS253425I12

2618

0.236 0.0025 0.0033

929931143

NIS338543I24

MITSUBISHI 4G63 2.0L 93-02 ECLIPSE 03-09 LANCER EVO 1.2, 1.2, 2.8mm Performance Ring Set Included

47cc 85.00mm 88.0mm 150mm 34.7mm 22mm -10.0cc 305 8.6 85.50mm 311 8.7 86.00mm 318 8.7 85.50mm -10.0cc 315 8.7 86.00mm 321 8.7 85.50mm 94.0mm 150mm 31.7mm 22mm -11.9cc 312 8.9 86.00mm 318 9.0 85.50mm 100.0mm 150mm 28.7mm 22mm -18.6cc 276 8.7 86.00mm 282 8.8 85.50mm 280 8.7 86.00mm 286 8.8 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.3mm below deck and 1.3mm head gasket thickness

MITSUBISHI 4B11T EVO X 2.0L 1.2, 1.2, 2.8mm Performance Ring Set Included

49cc 86.00mm 86.0mm 143.75mm 33.37mm 23mm -4.5cc 331 9.4 86.50mm 337 9.5 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at zero deck and 1.02mm head gasket thickness

NISSAN SR20DET (SILVIA) 2.0L NOTE : Must check oil squirter clearance, possible modification needed. 1.2, 1.2, 2.8mm Performance Ring Set Included

309 313

46.5cc 8.5 8.6

366

46cc 9.0

CR calculated at 0.47mm below deck and 1.09mm head gasket thickness

86.50mm 87.00mm

86.0mm

136mm

31.83mm 22mm -11.5cc

NISSAN KA24 DET 2.4L NOTE : Must check oil squirter clearance, possible modification needed. 1.2, 1.2, 2.8mm Performance Ring Set Included CR calculated at zero deck and 1.02mm head gasket thickness

90.00mm

96.0mm

165.0mm

2019 | 22 Phone: 1300 350 351

34mm

21mm -24.0cc

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Bore

Stroke

Rod

Comp Height

NISSAN RB25DET (SKYLINE) 2.5L

Pin Crown Wght Diam. Vol G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.236 0.0016 0.0024

929811650 929811601

NIS232405D12 NIS232425D12

2618

0.236 0.0031 0.0039

930110205 * NIS191405P16* 930110225 * NIS191425P16*

4032 2618

0.236 0.0016 0.0024 0.236 0.0031 0.0039

929810950 NIS264405I05 929994605 * NIS264405P05*

4032

0.250 0.0016 0.0024

929809360 929809380

2618

0.500 0.0025 0.0033

929942860 * NIS348760P04*

2618

0.250 0.0025 0.0033

930285660

4032

0.235 0.0021 0.0029

2618

0.235 0.0031 0.0039

930020322 SUB287622I12 930020342 SUB287642I12 930020361 SUB287661I12 929927942 * SUB287642P12* 929927961 * SUB287661P12*

4032

0.235 0.0021 0.0029

2618

0.235 0.0031 0.0039

2618

0.500 0.0021 0.0029

NOTE : Must check oil squirter clearance, possible modification needed. 1.2, 1.2, 2.8mm Performance Ring Set Included CR calculated at 0.15mm above deck and 0.99mm head gasket thickness

86.50mm 87.00mm

71.7mm

121.5mm

31.3mm

21mm 11.5cc

353 359

62cc 8.5 8.5

NISSAN RB26DETT (SKYLINE) 2.6L NOTE : Must check oil squirter clearance, possible modification needed. 1.2, 1.2, 2.8mm Performance Ring Set Included

65cc 86.50mm 73.7mm 121.5mm 30.25mm 21mm 16.0cc 366 8.5 87.00mm 372 8.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.1mm above deck and 1.57mm head gasket thickness

NISSAN RB30E/RB30ET (SKYLINE) 3.0L 1.2, 1.2, 2.8mm Performance Ring Set Included

58cc 86.50mm 85.0mm 152.5mm 32.5mm 21mm -4.3cc 323 8.0 332 8.0 86.50mm *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.5mm below deck and 1.0mm head gasket thickness

NISSAN VQ35DET (350z, INFINITI G35) 3.5L 1.2, 1.2, 2.5mm Performance Ring Set Included CR calculated at zero deck and 1.14mm head gasket thickness

95.50mm 96.00mm

81.4mm

144.1mm

29.6mm

22mm -5.0cc

388 394

56cc 9.4 9.5

NIS165760I05 NIS165780I05

NISSAN GT-R VR38 DETT 3.8L 1.2, 1.2, 2.5mm Performance Ring Set Included

64cc 95.51mm 88.4mm 165.1mm 34.25mm 23mm -3.6cc 430 9.1 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.45mm below deck and 1.0mm head gasket thickness

NISSAN GT-R STROKER VR38 DETT 4.1L 1.2, 1.2, 2.5mm Performance Ring Set Included

64cc 95.51mm 94.4mm 165.1mm 31.25mm 23mm -4.8cc 407 9.5 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.45mm below deck and 1.0mm head gasket thickness

SUBARU 2.0L EJ20 1.2, 1.2, 2.5mm Performance Ring Set Included

49cc 92.00mm 75.0mm 130.5mm 32.7mm 23mm -12.0cc 346 8.4 92.50mm 352 8.5 93.00mm 359 8.6 92.50mm 75.0mm 130.5mm 32.7mm 23mm -12.0cc 362 8.5 93.00mm 369 8.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.3mm below deck and 0.6mm head gasket thickness

SUBARU 2.2L STROKER 1.2, 1.2, 2.5mm Performance Ring Set Included

49cc 92.50mm 79.0mm 130.5mm 30.3mm 23mm -16.0cc 337 8.2 93.00mm 344 8.3 92.50mm 79.0mm 130.5mm 30.3mm 23mm -16.0cc 347 8.2 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.7mm below deck and 0.6mm head gasket thickness

929847842 SUB193642I16 929847861 SUB193661I16 929928142 * SUB193642P16*

SUBARU FA20 TURBO 1.2, 1.2, 2.8mm Performance Ring Set Included

40cc 86.00mm 86.0mm 129.3mm 32.5mm 22mm -8.0cc 320 10.5 86.50mm 326 10.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.2mm below deck and 0.61 x 89.5mm head gasket

2019 | 23 Phone: 1300 350 351

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

197769285 * 197769285* 197769205 * 197769205*

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Bore

Stroke

Rod

Comp Height SUBARU WRX 2.5L STI, FORESTER, LEGACY

Pin Crown Wght Diam. Vol G

Compression Ratio

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

4032

0.250 0.0021 0.0029

2618

0.250 0.0031 0.0039

4032

0.250 0.0021 0.0029

930285017 930285027 930285037 930285117 * 930285127 * 930285137 * 930285217 930285227 930285237

2618

0.250 0.0031 0.0039

930285417 * 930000917* 930285427 * 930000927* 930285437 * 930000937*

1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

50cc 56cc 99.50mm 79.0mm 130.5mm 30.7mm 23mm -19.3cc 398 9.1 8.5 99.75mm 401 9.1 8.5 100.0mm 405 9.1 8.5 99.50mm 79.0mm 130.5mm 30.7mm 23mm -19.3cc 409 9.1 8.5 99.75mm 413 9.1 8.5 100.0mm 417 9.1 8.5 99.50mm 79.0mm 130.5mm 30.7mm 23mm -14.1cc 411 9.6 9.0 99.75mm 414 9.7 9.0 100.00mm 418 9.7 9.0 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.3mm below deck and 0.6mm head gasket thickness

SUBARU WRX 2.5L STI, BOXED STRUT CONSTRUCTION 1.0, 1.0, 2.0mm File Fit Performance Ring Set Included

50cc 56cc 99.50mm 79.0mm 130.5mm 30.7mm 23mm -14.1cc 403 9.6 9.0 99.75mm 406 9.7 9.0 100.00mm 409 9.7 9.0 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at 0.3mm below deck and 0.6mm head gasket thickness

TOYOTA 2ZZ-GE (CELICA GT-S) 1.8L 1.0, 1.2, 2.8mm Performance Ring Set Included

20mm -12.0cc 4.3cc

298 330

38cc 9.1 12.5

4032 4032

0.250 0.0016 0.0024 0.250 0.0016 0.0024

929833600 929833700

2ZZ228228I12 2ZZ228228D04

22mm -4.1cc

343

51cc 9.0

4032

0.236 0.0016 0.0024

929807705

TOY378405I04

2618

0.236 0.0031 0.0039

928989305 * TOY338405P14* 928989325 * TOY338425P14*

CR calculated at 0.5mm below deck and 0.48mm head gasket thickness

82.01mm 82.01mm

85.0mm

137.9mm

31.2mm

TOYOTA 3S-GTE 2.0L 90-95 MR2 TURBO 1.2, 1.2, 2.8mm Performance Ring Set Included

86.50mm

86.0mm

138mm

35.0mm

TOYOTA 2JZ-GTE (SUPRA) 3.0L

46cc 86.50mm 86.0mm 142.0mm 34.0mm 22mm -14.2cc 337 8.5 87.00mm 343 8.6 *PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

1.2, 1.2, 2.8mm Performance Ring Set Included

VOLKSWAGEN/AUDI EARLY (95-2000) 1.8L TURBO 1.0, 1.2, 2.8mm Performance Ring Set Included

20mm -12.0cc

294

42cc 8.5

4032

0.395 0.0010 0.0018

930229009

AUD287209I12

21mm -7.2cc

295

42cc 9.0

4032

0.395 0.0010 0.0018

930070509

AUD209209I07

296

42cc 8.5

4032

0.395 0.0010 0.0018

929960209

TTA287209I12

CR calculated at zero deck and 1.14mm head gasket thickness

81.50mm

86.4mm

144mm

32.7mm

VOLKSWAGEN/AUDI S4 2.7L 6-cyl. 5V Turbo 1.0, 1.2, 2.8mm Performance Ring Set Included

81.50mm

86.4mm

154mm

30.7mm

VOLKSWAGEN/AUDI LATE (2000+) 1.8L TURBO 1.0, 1.2, 2.8mm Performance Ring Set Included CR calculated at zero deck and 1.14mm head gasket thickness

81.50mm

86.4mm

144mm

32.7mm

19mm -12.0cc

VOLKSWAGEN TFSi (2006-2009) 2.0L 1.0, 1.2, 2.8mm Performance Ring Set Included

45cc 82.50mm 92.8mm 144mm 29.6mm 20mm -10.4cc 312 9.3 M142P 0.250 0.0010 0.0018 83.00mm -11.1cc 318 9.3 83.50mm 323 9.4 *PowerPak Plus M142 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications **1.2, 1.2, 2.8mm Performance Ring Set Included

CR calculated at zero deck and 0.8mm head gasket thickness

197799948 * 197800168 ** 197800187 **

VOLKSWAGEN TSi (2010+) 2.0L 1.2, 1.5, 2.0mm Performance Ring Set Included

46cc 82.50 mm 92.8 mm 144 mm 29.6mm 21mm -7.1cc 323 9.5 M142P 0.250 0.0010 0.0018 83.00 mm 328 9.6 *PowerPak Plus M142 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications

CR calculated at zero deck and 1.0mm head gasket thickness

930188548 * TSI165248P07* 930188568 * TSI165268P07*

VOLKSWAGEN VR6 3.2L 4V 1.2, 1.2, 2.8mm Performance Ring Set Included CR calculated at zero deck and 1.0mm head gasket thickness

84.50mm

95.9mm

164mm

2019 | 24 Phone: 1300 350 351

34.7mm

20mm -22.5cc

358

39cc 9.0

2618

0.175 0.0025 0.0033

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

930016626

VR6354326I23

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Bore

Stroke

Rod

Comp Height

Compression Ratio

Pin Crown Wght Diam. Vol G

Alloy

Clearance Guide Meas. Min Max

Current Part No.

M124

0.500 0.0055 0.0063

M124

0.500 0.0055 0.0063

930036315 930036335 930036355 930036515 930036535 930036555

M124

0.500 0.0055 0.0063

M124

0.500 0.0055 0.0063

Old Part No.

DIESEL CUMMINS 5.9L B-Series Cast Performance Pistons - 12V Early 12V and marine-style bowl, short pin design, coated skirt - Ring Set (S42170) Included

7cc 16.5 16.6 16.8 15.3 15.4 15.6

CR calculated with 0.019" piston protrusion above deck and 0.060 x 4.150" head gasket

4.015 4.035 4.055 4.015 4.035 4.055

4.724

7.559

2.817

4.724

7.559

2.817

1.575 -47.1cc 1119 1138 1158 1.575 -52.4cc 1105 1124 1144

CUMMINS 5.9L B-Series Cast Performance Pistons - 12V w/ 0.150" deep valve pockets Early 12V and marine-style bowl, short pin design, coated skirt - Ring Set (S42170) Included

7cc 14.8 14.9 15.1 13.9 14.0 14.1

CR calculated with 0.019" piston protrusion above deck and 0.060 x 4.150" head gasket

4.015 4.035 4.055 4.015 4.035 4.055

4.724

7.559

2.817

4.724

7.559

2.817

1.575 -54.8cc 1099 1118 1137 1.575 -59.9cc 1085 1104 1124

930036415 930036435 930036455 930036615 930036635 930036655

CUMMINS 5.9L B-Series Forged Aluminum Race Pistons - 12V w/ 0.150" deep valve pockets CH reduced 0.010", Early 12V and marine-style bowl, Coated skirt and Hard Anodized top ring groove - Ring Set (9300440xx-6) Included

7cc 15.0 15.2 15.3 14.0 14.2 14.3

CR calculated with 0.019" piston protrusion above deck and 0.060 x 4.150" head gasket

4.015 4.035 4.055 4.015 4.035 4.055

4.724

7.559

2.805

4.724

7.559

2.805

1.575 -53.5cc 1191 1210 1229 1.575 -59.0cc 1183 1202 1222

M142P 0.500 0.0076 0.0084

M142P 0.500 0.0076 0.0084

197808815 197808835 197808855 197808715 197808735 197808755

CUMMINS 5.9L B-Series Forged Aluminum Race Pistons - 24V w/ 0.100" deep valve pockets CH reduced 0.010", Modified version of the 04.5-07 bowl, Coated skirt and Hard Anodized top ring groove - Ring Set (9300440xx-6) Included

6cc 16.3 16.5 16.7 15.4 15.5 15.7

CR calculated with 0.010" piston protrusion above deck and 0.060 x 4.150" head gasket

4.015 4.035 4.055 4.015 4.035 4.055

4.724

7.559

2.805

4.724

7.559

2.805

1.575 -46.7cc 1204 1222 1242 1.575 -51.0cc 1196 1215 1234

M142P 0.500 0.0076 0.0084

M142P 0.500 0.0076 0.0084

197809915 197809935 197809955 197809815 197809835 197809855

CUMMINS 5.9L B-Series Forged Aluminum Race Pistons - 12V or 24V (Custom Order) Call for details. Coated skirt and Hard Anodized top ring groove - Ring Set (9300440xx) Included

4.015+

made to order

made to order

made to order

M142P 0.500 0.0076 0.0084

9299430xx

CUMMINS 5.9L B-Series Forged Steel MONOTHERM - 24V 03-07 Commonrail (using 04.5-07 Injectors) CH reduced 0.010", modified version of 04.5-07 bowl for reduced CR, 0.075" pockets, DLC coated pin - Ring Set (S42170) Included

6cc 15.9 16.0 16.2

CR calculated with 0.010" piston protrusion above deck and 0.060 x 4.150" head gasket

4.015 4.035 4.055

4.724

7.559

2.804

1.575 -48.6cc 1681 1708 1736

Steel

0.750 0.0016 0.0023

929969315 929969335 929969355

CUMMINS 6.7L B-Series Forged Aluminum Race Pistons - 24V w/ 0.200" deep valve pockets CH reduced 0.010", Modified Industrial bowl, Coated skirt and Hard Anodized top ring groove - Ring Set (1978502xx-6) Included

6cc 15.9 16.0 16.1

CR calculated with 0.006" piston protrusion above deck and 0.062 x 4.312" head gasket

4.213 4.233 4.253

4.882

7.559

2.722

1.575 -55.6cc 1318 1338 1357

M142P 0.500 0.0076 0.0084

197850313 197850333 197850353

M142P 0.500 0.0046 0.0054

9299013xx

FORD 6.0L Powerstroke Forged Aluminum Race Pistons (Custom Order) Call for details. Coated skirt and Hard Anodized top ring groove - Ring Set (S41940) Included

3.740+

made to order

2019 | 25 Phone: 1300 350 351

made to order

made to order

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Bore

Stroke

Compression Ratio

Rod

Comp Pin Crown Wght Height Diam. Vol G FORD 6.4L Powerstroke Forged Aluminum Race Pistons (Custom Order)

Alloy

Clearance Guide Meas. Min Max

Current Part No.

Old Part No.

Call for details. Coated skirt and Hard Anodized top ring groove - Ring Set (S42097) Included

3.866+

made to order

made to order

made to order

M142P 0.500 0.0046 0.0054

9300602xx

M142P 0.500 0.0046 0.0054

1978353xx

M124P 0.500 0.0076 0.0084

1977637xx

FORD 6.7L Powerstroke Forged Aluminum Race Pistons (Custom Order) Call for details. Coated skirt and Hard Anodized top ring groove - Ring Set (S42168) Included

3.898+

made to order

made to order

made to order

FORD 7.3L Powerstroke Forged Aluminum Race Pistons (Custom Order) Call for details. Coated skirt and Hard Anodized top ring groove - Ring Set (S41768) Included

4.110+

made to order

made to order

made to order

GM 6.6L Duramax Cast Performance Pistons Revised casting with improved crown geometry and Performance bowl design, coated skirt - Ring Set (40xxMDK-D) Included CH reduced 0.010" - Fits LB7, LLY, LBZ, LMM, LGH, LML

6.5cc 16.6 16.8 17.0

CR calculated with 0.012" piston protrusion above deck and 0.037 x 4.115" head gasket

4.055 4.075 4.095

3.898

6.417

1.951

1.358 -40.7cc

864 880 896

M142

0.500 0.0016 0.0023

930036055 930036075 930036095

GM 6.6L Duramax Cast Performance Pistons w/ 0.075" Deep Valve Pockets Revised casting with improved crown geometry and Performance bowl design, coated skirt - Ring Set (40xxMDK-D) Included CH reduced 0.010" - Fits LB7, LLY, LBZ, LMM, LGH, LML

6.5cc 16.3 16.5 16.6

CR calculated with 0.012" piston protrusion above deck and 0.037 x 4.115" head gasket

4.055 4.075 4.095

3.898

6.417

1.951

1.358 -41.8cc

861 877 893

M142

0.500 0.0016 0.0023

930029855 930029875 930029895

GM 6.6L Duramax Forged Aluminum Race Pistons w/ 0.075" Deep Valve Pockets Shelf stock version of the Custom Race Piston, Coated skirt and Hard Anodized top ring groove - Ring Set (40xxMDR*) Included CH reduced 0.010" - Fits LB7, LLY, LBZ, LMM, LGH, LML - Brodix and Wagler Cylinder Heads CR calculated with 0.012" piston protrusion above deck and 0.037 x 4.115" head gasket

4.055 3.898 6.417 1.951 1.358 -41.8cc 4.075 4.095 *Includes CrN PVD Stainless Steel 1/16 Rectangular Top Ring

774 785 797

6.5cc 16.3 16.5 16.6

M124P 0.500 0.0055 0.0063

930036255 930036275 930036295

M124P 0.500 0.0055 0.0063

9299466xx

GM 6.6L Duramax Forged Aluminum Race Pistons (Custom Order) Call for details. Coated skirt and Hard Anodized top ring groove - Ring Set (40xxMDR*) Included

4.055+ made to order made to order *Includes CrN PVD Stainless Steel 1/16 Rectangular Top Ring

2019 | 26 Phone: 1300 350 351

made to order

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Finish Bore

Assembly Part Number

Description

1.5mm, 1.5mm, 3.0mm +.005" STD Tension File Fit Rings 3.551" 1.5, 1.5, 3.0mm File Fit 3556MS-15 3.571" 1.5, 1.5, 3.0mm File Fit 3576MS-15 3.581" 1.5, 1.5, 3.0mm File Fit 3586MS-15 3.810" 1.5, 1.5, 3.0mm 4cyl File Fit 3815MS-15 3.820" 1.5, 1.5, 3.0mm 4cyl File Fit 3825MS-15 3.830" 1.5, 1.5, 3.0mm 4cyl File Fit 3835MS-15 3.898" 1.5, 1.5, 3.0mm File Fit 3903MS-15 3.905" 1.5, 1.5, 3.0mm File Fit 3910MS-15 3.910" 1.5, 1.5, 3.0mm File Fit 3915MS-15 4.000" 1.5, 1.5, 3.0mm File Fit 4005MS-15 4.010" 1.5, 1.5, 3.0mm File Fit 4015MS-15 4.020" 1.5, 1.5, 3.0mm File Fit 4025MS-15 4.030" 1.5, 1.5, 3.0mm File Fit 4035MS-15 4.040" 1.5, 1.5, 3.0mm File Fit 4045MS-15 4.055" 1.5, 1.5, 3.0mm File Fit 4060MS-15 4.060" 1.5, 1.5, 3.0mm File Fit 4065MS-15 4.065" 1.5, 1.5, 3.0mm File Fit 4070MS-15 4.070" 1.5, 1.5, 3.0mm File Fit 4075MS-15 4.080" 1.5, 1.5, 3.0mm File Fit 4085MS-15 4.090" 1.5, 1.5, 3.0mm File Fit 4095MS-15 4.100" 1.5, 1.5, 3.0mm File Fit 4105MS-15 4.110" 1.5, 1.5, 3.0mm File Fit 4115MS-15 4.120" 1.5, 1.5, 3.0mm File Fit 4125MS-15 4.125" 1.5, 1.5, 3.0mm File Fit 4130MS-15 4.130" 1.5, 1.5, 3.0mm File Fit 4135MS-15 4.135" 1.5, 1.5, 3.0mm File Fit 4140MS-15 4.140" 1.5, 1.5, 3.0mm File Fit 4145MS-15 4.145" 1.5, 1.5, 3.0mm File Fit 4150MS-15 4.150" 1.5, 1.5, 3.0mm File Fit 4155MS-15 4.155" 1.5, 1.5, 3.0mm File Fit 4160MS-15 4.160" 1.5, 1.5, 3.0mm File Fit 4165MS-15 4.165" 1.5, 1.5, 3.0mm File Fit 4170MS-15 4.250" 1.5, 1.5, 3.0mm File Fit 4255MS-15 4.280" 1.5, 1.5, 3.0mm File Fit 4285MS-15 4.310" 1.5, 1.5, 3.0mm File Fit 4315MS-15 4.320" 1.5, 1.5, 3.0mm File Fit 4325MS-15 4.350" 1.5, 1.5, 3.0mm File Fit 4355MS-15 4.375" 1.5, 1.5, 3.0mm File Fit 4380MS-15 4.390" 1.5, 1.5, 3.0mm File Fit 4395MS-15 4.440" 1.5, 1.5, 3.0mm File Fit 4445MS-15 4.500" 1.5, 1.5, 3.0mm File Fit 4505MS-15 4.530" 1.5, 1.5, 3.0mm File Fit 4535MS-15 4.560" 1.5, 1.5, 3.0mm File Fit 4565MS-15 4.600" 1.5, 1.5, 3.0mm File Fit 4605MS-15 1.5mm, 1.5mm, 3.0mm STD Tension Drop In Rings 3.551" 1.5, 1.5, 3.0 mm Drop In 3.927" 1.5, 1.5, 3.0 mm Drop In 3.937" 1.5, 1.5, 3.0 mm Drop In 3.947" 1.5, 1.5, 3.0 mm Drop In 4.000" 1.5, 1.5, 3.0 mm Drop In 4.030" 1.5, 1.5, 3.0 mm Drop In 4.125" 1.5, 1.5, 3.0 mm Drop In 4.155" 1.5, 1.5, 3.0 mm Drop In 4.250" 1.5, 1.5, 3.0 mm Drop In 4.500" 1.5, 1.5, 3.0 mm Drop In 4.600" 1.5, 1.5, 3.0 mm Drop In

2019 | 27 Phone: 1300 350 351

3551MS-15 3927MS-15 3937MS-15 3947MS-15 4000MS-15D 4030MS-15D 4125MS-15D 4155MS-15D 4250MS-15D 4500MS-15D 4600MS-15D

Finish Bore

Description

1.0mm, 1.0mm, 2.0mm +.005 STD Tension File Fit Rings 3.551" 1.0, 1.0, 2.0mm File Fit 3557MS-112 3.571" 1.0, 1.0, 2.0mm File Fit 3577MS-112 3.581" 1.0, 1.0, 2.0mm File Fit 3587MS-112 3.630" 1.0, 1.0, 2.0mm File Fit 3635MS-112 3.640" 1.0, 1.0, 2.0mm File Fit 3645MS-112 3.766" 1.0, 1.0, 2.0mm File Fit 3771MS-112 3.776" 1.0, 1.0, 2.0mm File Fit 3781MS-112 3.786" 1.0, 1.0, 2.0mm File Fit 3791MS-112 3.796" 1.0, 1.0, 2.0mm File Fit 3801MS-112 3.800" 1.0, 1.0, 2.0mm File Fit 3805MS-112 3.810" 1.0, 1.0, 2.0mm File Fit 3815MS-112 3.820" 1.0, 1.0, 2.0mm File Fit 3825MS-112 3.830" 1.0, 1.0, 2.0mm File Fit 3835MS-112 3.898" 1.0, 1.0, 2.0mm File Fit 3903MS-112 3.905" 1.0, 1.0, 2.0mm File Fit 3910MS-112 4.000" 1.0, 1.0, 2.0mm File Fit 4005MS-112 4.005" 1.0, 1.0, 2.0mm File Fit 4010MS-112 4.010" 1.0, 1.0, 2.0mm File Fit 4015MS-112 4.020" 1.0, 1.0, 2.0mm File Fit 4025MS-112 4.025" 1.0, 1.0, 2.0mm File Fit 4030MS-112 4.030" 1.0, 1.0, 2.0mm File Fit 4035MS-112 4.035" 1.0, 1.0, 2.0mm File Fit 4040MS-112 4.040" 1.0, 1.0, 2.0mm File Fit 4045MS-112 4.045" 1.0, 1.0, 2.0mm File Fit 4050MS-112 4.050" 1.0, 1.0, 2.0mm File Fit 4055MS-112 4.055" 1.0, 1.0, 2.0mm File Fit 4060MS-112 4.060" 1.0, 1.0, 2.0mm File Fit 4065MS-112 4.065" 1.0, 1.0, 2.0mm File Fit 4070MS-112 4.070" 1.0, 1.0, 2.0mm File Fit 4075MS-112 4.075" 1.0, 1.0, 2.0mm File Fit 4080MS-112 4.080" 1.0, 1.0, 2.0mm File Fit 4085MS-112 4.090" 1.0, 1.0, 2.0mm File Fit 4095MS-112 4.100" 1.0, 1.0, 2.0mm File Fit 4105MS-112 4.125" 1.0, 1.0, 2.0mm File Fit 4130MS-112 4.130" 1.0, 1.0, 2.0mm File Fit 4135MS-112 4.135" 1.0, 1.0, 2.0mm File Fit 4140MS-112 4.140" 1.0, 1.0, 2.0mm File Fit 4145MS-112 4.145" 1.0, 1.0, 2.0mm File Fit 4150MS-112 4.150" 1.0, 1.0, 2.0mm File Fit 4155MS-112 4.155" 1.0, 1.0, 2.0mm File Fit 4160MS-112 4.160" 1.0, 1.0, 2.0mm File Fit 4165MS-112 4.165" 1.0, 1.0, 2.0mm File Fit 4170MS-112 4.170" 1.0, 1.0, 2.0mm File Fit 4175MS-112 4.175" 1.0, 1.0, 2.0mm File Fit 4180MS-112 4.185" 1.0, 1.0, 2.0mm File Fit 4190MS-112 4.245" 1.0, 1.0, 2.0mm File Fit 4250MS-112 4.250" 1.0, 1.0, 2.0mm File Fit 4255MS-112 4.255" 1.0, 1.0, 2.0mm File Fit 4260MS-112 4.260" 1.0, 1.0, 2.0mm File Fit 4265MS-112 4.265" 1.0, 1.0, 2.0mm File Fit 4270MS-112 4.270" 1.0, 1.0, 2.0mm File Fit 4275MS-112 1.0mm, 1.0mm, 2.0mm STD Tension Drop In Rings 4.000" 1.0, 1.0, 2.0mm Drop-In 4.030" 1.0, 1.0, 2.0mm Drop-In 4.040" 1.0, 1.0, 2.0mm Drop-In 4.055" 1.0, 1.0, 2.0mm Drop-In 4.125" 1.0, 1.0, 2.0mm Drop-In 4.155" 1.0, 1.0, 2.0mm Drop-In

www.mahlemotorsports.com Fax: 1300 350 454

Assembly Part Number

Web: www.fabre.com.au

4000MS-112D 4030MS-112D 4040MS-112D 4055MS-112D 4125MS-112D 4155MS-112D

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Finish Bore

Assembly Part Number

Description

Finish Bore

Assembly Part Number

Description

1/16", 1/16", 3/16" +.005" Standard Tension File Fit Rings 4.020" 1/16", 1/16", 3/16" File Fit 4025MS 4.030" 1/16", 1/16", 3/16" File Fit 4035MS 4.040" 1/16", 1/16", 3/16" File Fit 4045MS 4.045" 1/16", 1/16", 3/16" File Fit 4050MS 4.060" 1/16", 1/16", 3/16" File Fit 4065MS 4.070" 1/16", 1/16", 3/16" File Fit 4075MS 4.100" 1/16", 1/16", 3/16" File Fit 4105MS 4.125" 1/16", 1/16", 3/16" File Fit 4130MS 4.130" 1/16", 1/16", 3/16" File Fit 4135MS 4.135" 1/16", 1/16", 3/16" File Fit 4140MS 4.145" 1/16", 1/16", 3/16" File Fit 4150MS 4.155" 1/16", 1/16", 3/16" File Fit 4160MS 4.165" 1/16", 1/16", 3/16" File Fit 4170MS 4.185" 1/16", 1/16", 3/16" File Fit 4190MS 4.250" 1/16", 1/16", 3/16" File Fit 4255MS 4.260" 1/16", 1/16", 3/16" File Fit 4265MS 4.270" 1/16", 1/16", 3/16" File Fit 4275MS 4.280" 1/16", 1/16", 3/16" File Fit 4285MS 4.290" 1/16", 1/16", 3/16" File Fit 4295MS 4.310" 1/16", 1/16", 3/16" File Fit 4315MS 4.320" 1/16", 1/16", 3/16" File Fit 4325MS 4.350" 1/16", 1/16", 3/16" File Fit 4355MS 4.360" 1/16", 1/16", 3/16" File Fit 4365MS 4.375" 1/16", 1/16", 3/16" File Fit 4380MS 4.440" 1/16", 1/16", 3/16" File Fit 4445MS 4.470" 1/16", 1/16", 3/16" File Fit 4475MS 4.500" 1/16", 1/16", 3/16" File Fit 4505MS 4.530" 1/16", 1/16", 3/16" File Fit 4535MS 4.560" 1/16", 1/16", 3/16" File Fit 4565MS 4.600" 1/16", 1/16", 3/16" File Fit 4605MS 4.630" 1/16", 1/16", 3/16" File Fit 4635MS

1/16", 1/16", 3/16" +.005" Low Tension File Fit Rings 4.000" 1/16", 1/16", 3/16" File Fit 4.020" 1/16", 1/16", 3/16" File Fit 4.030" 1/16", 1/16", 3/16" File Fit 4.040" 1/16", 1/16", 3/16" File Fit 4.045" 1/16", 1/16", 3/16" File Fit 4.060" 1/16", 1/16", 3/16" File Fit 4.070" 1/16", 1/16", 3/16" File Fit 4.100" 1/16", 1/16", 3/16" File Fit 4.125" 1/16", 1/16", 3/16" File Fit 4.130" 1/16", 1/16", 3/16" File Fit 4.135" 1/16", 1/16", 3/16" File Fit 4.145" 1/16", 1/16", 3/16" File Fit 4.155" 1/16", 1/16", 3/16" File Fit 4.165" 1/16", 1/16", 3/16" File Fit 4.185" 1/16", 1/16", 3/16" File Fit 4.250" 1/16", 1/16", 3/16" File Fit 4.270" 1/16", 1/16", 3/16" File Fit 4.280" 1/16", 1/16", 3/16" File Fit 4.290" 1/16", 1/16", 3/16" File Fit 4.310" 1/16", 1/16", 3/16" File Fit 4.320" 1/16", 1/16", 3/16" File Fit 4.350" 1/16", 1/16", 3/16" File Fit 4.360" 1/16", 1/16", 3/16" File Fit 4.375" 1/16", 1/16", 3/16" File Fit 4.380" 1/16", 1/16", 3/16" File Fit 4.400" 1/16", 1/16", 3/16" File Fit 4.470" 1/16", 1/16", 3/16" File Fit 4.500" 1/16", 1/16", 3/16" File Fit 4.530" 1/16", 1/16", 3/16" File Fit 4.560" 1/16", 1/16", 3/16" File Fit 4.600" 1/16", 1/16", 3/16" File Fit

1/16", 1/16", 3/16" Standard Tension Drop In Rings 4.000" 1/16", 1/16", 3/16" Drop In 4.020" 1/16", 1/16", 3/16" Drop In 4.030" 1/16", 1/16", 3/16" Drop In 4.040" 1/16", 1/16", 3/16" Drop In 4.060" 1/16", 1/16", 3/16" Drop In 4.080" 1/16", 1/16", 3/16" Drop In 4.125" 1/16", 1/16", 3/16" Drop In 4.145" 1/16", 1/16", 3/16" Drop In 4.155" 1/16", 1/16", 3/16" Drop In 4.165" 1/16", 1/16", 3/16" Drop In 4.185" 1/16", 1/16", 3/16" Drop In 4.250" 1/16", 1/16", 3/16" Drop In 4.260" 1/16", 1/16", 3/16" Drop In 4.270" 1/16", 1/16", 3/16" Drop In 4.280" 1/16", 1/16", 3/16" Drop In 4.290" 1/16", 1/16", 3/16" Drop In 4.310" 1/16", 1/16", 3/16" Drop In 4.330" 1/16", 1/16", 3/16" Drop In 4.360" 1/16", 1/16", 3/16" Drop In 4.390" 1/16", 1/16", 3/16" Drop In 4.400" 1/16", 1/16", 3/16" Drop In 4.420" 1/16", 1/16", 3/16" Drop In 4.466" 1/16", 1/16", 3/16" Drop In 4.500" 1/16", 1/16", 3/16" Drop In 4.600" 1/16", 1/16", 3/16" Drop In 4.630" 1/16", 1/16", 3/16" Drop In

.043", .043", 3.0mm Low Tension File Fit Rings 3.551" .043", .043", 3.0mm File Fit 3.571" .043", .043", 3.0mm File Fit 3.581" .043", .043", 3.0mm File Fit 3.766" .043", .043", 3.0mm File Fit 3.776" .043", .043", 3.0mm File Fit 3.786" .043", .043", 3.0mm File Fit 3.796" .043", .043", 3.0mm File Fit 3.810" .043", .043", 3.0mm 2.3L File fit 3.820" .043", .043", 3.0mm 2.3L File fit 3.830" .043", .043", 3.0mm 2.3L File fit 3.898" .043", .043", 3.0mm File Fit 3.905" .043", .043", 3.0mm File Fit 3.910" .043", .043", 3.0mm File Fit 4.000" .043", .043", 3.0mm File Fit 4.005" .043", .043", 3.0mm File Fit 4.010" .043", .043", 3.0mm File Fit 4.020" .043", .043", 3.0mm File Fit 4.025" .043", .043", 3.0mm File Fit 4.030" .043", .043", 3.0mm File Fit 4.035" .043", .043", 3.0mm File Fit 4.040" .043", .043", 3.0mm File Fit 4.045" .043", .043", 3.0mm File Fit 4.050" .043", .043", 3.0mm File Fit 4.055" .043", .043", 3.0mm File Fit 4.060" .043", .043", 3.0mm File Fit 4.065" .043", .043", 3.0mm File Fit 4.070" .043", .043", 3.0mm File Fit 4.080" .043", .043", 3.0mm File Fit 4.100" .043", .043", 3.0mm File Fit 4.125" .043", .043", 3.0mm File Fit 4.130" .043", .043", 3.0mm File Fit 4.135" .043", .043", 3.0mm File Fit 4.140" .043", .043", 3.0mm File Fit

2019 | 28 Phone: 1300 350 351

4000MS 4020MS 4030MS 4040MS 4060MS 4080MS 4125MS 4145MS 4155MS 4165MS 4185MS 4250MS 4260MS 4270MS 4280MS 4290MS 4310MS 4330MS 4360MS 4390MS 4400MS 4420MS 4466MS 4500MS 4600MS 4630MS

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

4005ML 4025ML 4035ML 4045ML 4050ML 4065ML 4075ML 4105ML 4130ML 4135ML 4140ML 4150ML 4160ML 4170ML 4190ML 4255ML 4275ML 4285ML 4295ML 4315ML 4325ML 4355ML 4365ML 4380ML 4385ML 4405ML 4475ML 4505ML 4535ML 4565ML 4605ML

3556ML-043 3576ML-043 3586ML-043 3771MS-043 3781MS-043 3791MS-043 3801MS-043 3815ML-043 3825ML-043 3835ML-043 3903ML-043 3910ML-043 3915ML-043 4005ML-043 4010ML-043 4015ML-043 4025ML-043 4030ML-043 4035ML-043 4040ML-043 4045ML-043 4050ML-043 4055ML-043 4060ML-043 4065ML-043 4070ML-043 4075ML-043 4085ML-043 4105ML-043 4130ML-043 4135ML-043 4140ML-043 4145ML-043

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Finish Bore

Assembly Part Number

Description

.043", .043", 3.0mm +.005" Low Tension File Fit Rings Cont.. 4.145" .043", .043", 3.0mm File Fit 4150ML-043 4.150" .043", .043", 3.0mm File Fit 4155ML-043 4.155" .043", .043", 3.0mm File Fit 4160ML-043 4.160" .043", .043", 3.0mm File Fit 4165ML-043 4.165" .043", .043", 3.0mm File Fit 4170ML-043 4.170" .043", .043", 3.0mm File Fit 4175ML-043 4.175" .043", .043", 3.0mm File Fit 4180ML-043 4.180" .043", .043", 3.0mm File Fit 4185ML-043 4.185" .043", .043", 3.0mm File Fit 4190ML-043 .043", .043", 3.0mm +.005" Steel Low Tension File Fit Rings 4.600" .043", .043", 3.0mm File Fit 4605SL-043 4.605" .043", .043", 3.0mm File Fit 4610SL-043 4.610" .043", .043", 3.0mm File Fit 4615SL-043 4.625" .043", .043", 3.0mm File Fit 4630SL-043 .043", .043", 3.0mm +.005" Steel STD Tension File Fit Rings 4.600" .043", .043", 3.0mm File Fit 4605SS-043 4.605" .043", .043", 3.0mm File Fit 4610SS-043 4.610" .043", .043", 3.0mm File Fit 4615SS-043 4.615" .043", .043", 3.0mm File Fit 4620SS-043 4.620" .043", .043", 3.0mm File Fit 4625SS-043 4.625" .043", .043", 3.0mm File Fit 4630SS-043 4.630" .043", .043", 3.0mm File Fit 4635SS-043 1.1mm, 1.5mm, 3.0mm +.005" STD Tension File Fit Rings 4.125" 1.1, 1.5, 3.0mm File Fit 4130MS-1115 4.130" 1.1, 1.5, 3.0mm File Fit 4135MS-1115 4.135" 1.1, 1.5, 3.0mm File Fit 4140MS-1115 4.140" 1.1, 1.5, 3.0mm File Fit 4145MS-1115 4.145" 1.1, 1.5, 3.0mm File Fit 4150MS-1115 4.150" 1.1, 1.5, 3.0mm File Fit 4155MS-1115 4.155" 1.1, 1.5, 3.0mm File Fit 4160MS-1115 4.160" 1.1, 1.5, 3.0mm File Fit 4165MS-1115 4.165" 1.1, 1.5, 3.0mm File Fit 4170MS-1115 4.185" 1.1, 1.5, 3.0mm File Fit 4190MS-1115 4.250" 1.1, 1.5, 3.0mm File Fit 4255MS-1115 Sport Compact Rings 80.50 mm 1.0, 1.2, 2.8mm Drop In 81.00 mm 1.0, 1.2, 2.8mm Drop In 81.25 mm 1.0, 1.2, 2.8mm Drop In 81.50 mm 1.0, 1.2, 2.8mm Drop In 82.00 mm 1.0, 1.2, 2.8mm Drop In 82.50 mm 1.0, 1.2, 2.8mm Drop In 83.00 mm 1.2, 1.2, 2.8mm Drop In 83.50 mm 1.2, 1.2, 2.8mm Drop In 84.00 mm 1.2, 1.2, 2.8mm Drop In 84.50 mm 1.2, 1.2, 2.8mm Drop In 85.00 mm 1.2, 1.2, 2.8mm Drop In 85.50 mm 1.2, 1.2, 2.8mm Drop In 86.00 mm 1.2, 1.2, 2.8mm Drop In 86.50 mm 1.2, 1.2, 2.8mm Drop In 87.00 mm 1.2, 1.2, 2.8mm Drop In 87.25 mm 1.2, 1.2, 2.8mm Drop In 87.50 mm 1.2, 1.2, 2.8mm Drop In 88.00 mm 1.2, 1.2, 2.8mm Drop In 88.50 mm 1.2, 1.2, 2.8mm Drop In 89.00 mm 1.2, 1.2, 2.8mm Drop In 92.00 mm 1.2, 1.2, 2.5mm Drop In 92.30 mm 1.2, 1.2, 2.5mm Drop In 92.38 mm 1.2, 1.2, 2.5mm Drop In 92.50 mm 1.2, 1.2, 2.5mm Drop In 93.00 mm 1.2, 1.2, 2.5mm Drop In 94.00 mm 1.2, 1.2, 2.5mm Drop In 95.50 mm 1.2, 1.2, 2.5mm Drop In 96.00 mm 1.2, 1.2, 2.5mm Drop In 99.50 mm 1.2, 1.5, 2.8mm File Fit 99.75 mm 1.2, 1.5, 2.8mm File Fit 100.00 mm 1.2, 1.5, 2.8mm File Fit

2019 | 29 Phone: 1300 350 351

8050MS-10 8100MS-10 8125MS-10 8150MS-10 8200MS-10 8250MS-10 8300MS-12 8350MS-12 8400MS-12 8450MS-12 8500MS-12 8550MS-12 8600MS-12 8650MS-12 8700MS-12 8725MS-12 8750MS-12 8800MS-12 8850MS-12 8900MS-12 9200MS-12 9230MS6-12 9238MS6-12 9250MS-12 9300MS-12 9400MS-12 9550MS-12 9600MS-12 9950MS-12 9975MS-12 10000MS-12

Finish Bore

1.5mm Gas Nitrided Steel Top Ring Sets (8cyl) 4.280" 1.5mm GNS Top Ring File Fit 4.310" 1.5mm GNS Top Ring File Fit 4.320" 1.5mm GNS Top Ring File Fit 4.350" 1.5mm GNS Top Ring File Fit 4.375" 1.5mm GNS Top Ring File Fit 4.390" 1.5mm GNS Top Ring File Fit 4.440" 1.5mm GNS Top Ring File Fit 4.500" 1.5mm GNS Top Ring File Fit 4.530" 1.5mm GNS Top Ring File Fit 4.560" 1.5mm GNS Top Ring File Fit 4.600" 1.5mm GNS Top Ring File Fit

4280GNS-15T 4310GNS-15T 4320GNS-15T 4350GNS-15T 4375GNS-15T 4390GNS-15T 4440GNS-15T 4500GNS-15T 4530GNS-15T 4560GNS-15T 4600GNS-15T

3.0mm Oil Ring Standard Tension Rails (8cyl) 4.000" 3.0mm STD Tension Rails (16pcs) 4.030" 3.0mm STD Tension Rails (16pcs) 4.040" 3.0mm STD Tension Rails (16pcs) 4.060" 3.0mm STD Tension Rails (16pcs) 4.125" 3.0mm STD Tension Rails (16pcs) 4.135" 3.0mm STD Tension Rails (16pcs) 4.145" 3.0mm STD Tension Rails (16pcs) 4.155" 3.0mm STD Tension Rails (16pcs) 4.165" 3.0mm STD Tension Rails (16pcs)

4000-300R 4030-300R 4040-300R 4060-300R 4125-300R 4135-300R 4145-300R 4155-300R 4165-300R

3.0mm Oil Ring Standard Tension Expanders (8cyl) 4.000" 3.0mm STD Tension Expanders (8pcs) 4.030" 3.0mm STD Tension Expanders (8pcs) 4.040" 3.0mm STD Tension Expanders (8pcs) 4.050" 3.0mm STD Tension Expanders (8pcs) 4.060" 3.0mm STD Tension Expanders (8pcs) 4.125" 3.0mm STD Tension Expanders (8pcs) 4.135" 3.0mm STD Tension Expanders (8pcs) 4.145" 3.0mm STD Tension Expanders (8pcs) 4.155" 3.0mm STD Tension Expanders (8pcs) 4.165" 3.0mm STD Tension Expanders (8pcs)

4000-300S 4030-300S 4040-300S 4050-300S 4060-300S 4125-300S 4135-300S 4145-300S 4155-300S 4165-300S

Lock'N Tool Clip insertion tool for .927" clip Clip insertion tool for .990" clip Oil Ring Support Rails 3.898-3.947 2mm Support Rail 4.000-4.040 2mm Support Rail 4.040-4.080 2mm Support Rail 4.080-4.120 2mm Support Rail 4.125-4.165 2mm Support Rail 4.165-4.205 2mm Support Rail 4.240-4.280 2mm Support Rail 3.810-3.840 3mm Support Rail 3.898-(LS1) 3mm Support Rail 3.917-3.957 3mm Support Rail 4.000-4.040 3mm Support Rail 4.040-4.080 3mm Support Rail 4.080-4.120 3mm Support Rail 4.125-4.185 3mm Support Rail 4.165-4.205 3mm Support Rail 4.250-4.290 3mm Support Rail 4.310-4.350 3mm Support Rail 4.390-4.430 3mm Support Rail 4.500-4.560 3mm Support Rail 4.600-4.630 3mm Support Rail 4.130-4.180 3mm Support Rail 4.125-4.185 3/16" Support Rail 4.250-4.290 3/16" Support Rail 4.310-4.350 3/16" Support Rail 4.500-4.560 3/16" Support Rail 4.600-4.630 3/16" Support Rail

www.mahlemotorsports.com Fax: 1300 350 454

Assembly Part Number

Description

Web: www.fabre.com.au

W-927 W-990

9301947 9301835 9301838 9301922 9301840 9301923 1977167 9302399 9301680 9301501 9290024 9298684 9301133 9290032 9300686 9299227 9299226 9301926 9299228 9299225 9298909 9298909 9290040 9298577 9290057 9299942

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au


Piston Pins 0.912 x 2.287 x 0.121W CH 87g LW 0.927 x 2.288 x 0.129W CH 93g LW 0.792 x 2.250 x 0.140W CH 83g 0.866 x 2.406 x 0.177W CH 118g 0.867 x 2.288 x 0.178W CH 112g 0.912 x 2.287 x 0.171W CH 116g 0.927 x 2.288 x 0.168W CH 118g 0.928 x 2.288 x 0.169W CH 118g 0.930 x 2.288 x 0.170W CH 119g 0.945 x 2.287 x 0.177W CH 125g 0.975 x 2.519 x 0.172W CH 130g 0.984 x 2.287 x 0.162W CH 122g 0.990 x 2.520 x 0.180W CH 148g 1.094 x 2.520 x 0.163W CH 153g 0.927 x 2.288 x 0.188W CH 128g HD 0.928 x 2.288 x 0.188W CH 128g HD 0.929 x 2.244 x 0.189W R 127g HD 0.990 x 2.520 x 0.220W CH 171g HD LW = Light Weight HD = Heavy Duty CH =Chamfered W = Wall Thickness R = Radiused

2019 | 30 Phone: 1300 350 351

9900159 9900184 9900211 6458160 9900107 6458152 6457808 9900536 9900538 9900079 9311348 9299391 7758139 9839256 6457147 9900108 6455117 9866438

Sport Compact Pins 20 x 50.8mm CH 84g 21 x 50mm CH 98g 22 x 52mm CH 103g 22 x 58.11mm CH 112g 23 x 57.404mm CH 124g

9900293 9900109 5859988 9900106 9298392

Clips (each) .792" x 1.6mm no tang Clip .866" x 1.6mm no tang Clip .912" x 1.6mm no tang Clip .927" x 1.6mm no tang Clip .927" x 1.6mm w/ tang Clip .945" x 1.6mm no tang Clip .990" x 1.6mm no tang Clip

9900215 2042968 6458129 6441489 6436901 9900539 6458137

Sport Compact Clips (each) 20mm x 1.6mm no tang 21mm x 1.6mm no tang 22mm x 1.6mm no tang 23mm x 1.6mm no tang 23mm OE Subaru (double tang)

9900112 9900110 2042968 6458129 9298265

www.mahlemotorsports.com Fax: 1300 350 454

Web: www.fabre.com.au

MAHLE Motorsport 888-255-1942 Email: info@fabre.com.au

Profile for Fabre Australia

2019 Mahle Motorsport Application Guide  

2019 Mahle Motorsport Application Guide

2019 Mahle Motorsport Application Guide  

2019 Mahle Motorsport Application Guide

Profile for fabreaus