4JA1/4JH1 ENGINE DRIVEABILITY AND EMISSIONS
6E–189
Step
Action
Value(s)
Yes
No
11
Is the ECM programmed with the latest software release? If not, download the latest software to the ECM using the "SPS (Service Programming System)". Was the problem solved?
-
Verify repair
Go to Step 12
Replace the ECM. Is the action complete? IMPORTANT: The replacement ECM must be programmed. Refer to section of the Service Programming System(SPS) in this manual. Following ECM programming, the immobiliser system (if equipped) must be linked to the ECM. Refer to section 11 "Immobilizer System-ECM replacement" for the ECM/Immobilizer linking procedure.
-
Verify repair
-
12