Cylinder Block, Liners, Pistons and Rods
Liner O-Ring Installation Apply lubricating soap to new O-rings. Install O-rings in respective grooves.
CD7135
–UN–07MAR95
A—Rectangular section packing B—Red or white O-ring C—Black O-ring D—Cylinder liner E—Cylinder block
CD,3274,G10,28 –19–18FEB92–1/1
Install Cylinder Liners NOTE: Recent cylinder liners are machined with a shoulder on the lower guiding diameter (A). Liners, up to machining code “848M” stamped on the outside have a shoulder radius of 0.8 mm (0.03 in.) which may cause damage to liner seals during installation. The 0.8 mm (0.03 in.) radius has been changed then to 3 mm (0.13 in.) allowing proper installation when using KCD10001 tool. 1. On liners with 0.8 mm (0.03 in.) radius blunt the sharp edge with a honing stone or emery cloth.
–UN–22FEB99
2. Slide liner together with shim (when needed) and packing into its bore in cylinder block.
CD30707
10 12
Continued on next page
CTM125 (22MAR06)
10-12
CD,CTM125,059 –19–12JAN01–1/2
POWERTECH 2.9 L Diesel Engines 032306
PN=84