A BARKS PUBLICATION
Electrical Apparatus DECEMBER 2023 / $9
More than Motors
Bringing a new product to market
The sometimes-rocky road from conception to delivery to the customer
China, post-pandemic Developing new standards A tale of two pump stations Engineering acronyms Training ‘Gen-Zeal’
12Lafert.indd 1
11/6/2023 2:15:17 PM
Say It Right
16 Cracking the code
Be careful when using acronyms or ill-defined phrases By Richard L. Nailen, EA Engineering Editor
Energy
20 Griddle me that
— U.S. Dept. of Energy photo
12/23
Contents
A BARKS PUBLICATION VOLUME 76 / NUMBER 12 WWW.BARKS.COM
20
Three new interregional U.S. transmission lines will create jobs, the U.S. Dept. of Energy says By Charlie Barks, EA Managing Editor
Electrical Manager
22 Get smart about setting goals
29
— SpringPoint Solutions photo
Team member buy-in is essential for reaching your articulated objectives By Bill O’Leary, EA Contributing Writer
Conventions & Trade Shows 24 A world of water
Here are a few of the friendly faces we encountered at Weftec 2023, the premier North American event for people who manage and process water By the Electrical Apparatus staff
Electric Avenue
26 Early adopters
Where in the U.S. electric vehicle manufacturing is concentrated — and what may lie on the road ahead By Maura Keller, EA Contributing Writer
Product Development
29 From concept to customer
Following the progress of the typical new product from conception to delivery to the user By Bill O’Leary, EA Contributing Writer
33
— IEEE photo
Technical Standards
33 Why get involved with standards?
Opportunities for career advancement abound for people willing to volunteer and help out By John Malinowski, EA Contributing Writer
More Than Accounting
36 China’s standing post-pandemic
The nation is staggering to its feet economically, hobbled by a zero-Covid policy and broken supply chains By William H. Wiersema, CPA, EA Contributing Editor
Pump It Up
42 A tale of two pumping stations
A pair of case studies show the consequences of replacing a water-treatment system all at once versus doing so over time By Kevin Jones, EA Senior Editor
Training & Education 44 Gen-Zeal
Younger generation’s training modules look different but still yield enthusiasm By Chelsea Fisher, EA Contributing Writer
12con.indd 1
ELECTRICAL APPARATUS | DECEMBER 2023 1
11/10/2023 9:14:51 AM
— PMPA photo
Departments 04 The editor’s comment
The new products we all rely on
05 Let’s solve your problem
Answers to questions about motor application and maintenance
06 Business
An autumn harvest of financial reports from electrical suppliers
08 Know your industry
The Precision Machined Products Association: That’s so metal!
12 Associations
The new products that vied for AEMT award recognition
08
13 Calendar
14 EA reader profile
Andrew Eklind is the very model of a modern marketer
18 Speaking of . . .
The U.S. releases first regulations on artificial intelligence
28 Plant happenings
Energy firm backs out of wind projects; UAW strike ripples
— Menzel Elektromotoren photo
Upcoming events on HVAC/R, pumps, testing, energy, and more
38 Product showcase
What’s new in robotics, tools, batteries, and ceramics
45 Names & faces
Personnel changes at Xcel Energy, TrueBlue, and Verizon
45 Deaths
Albert ‘Al’ Waid, field tech and shop owner
46 Utilities
14
— Andrew Eklind photo
One utility executive’s lessons from the pandemic
12
47 Classified advertising
Your monthly marketplace for equipment, businesses, and more
47 Cy’s Super Service
The electrical service industry’s most prominent curmudgeon
49 EA puzzle
A word search puzzle about engineering acronyms
51 Moe, Genny & friends
The surreal world of an anthropomorphized motor and generator
52 Direct & current
A motor design firm wins a LEAP Award, and WeWork is bankrupt
52 Advertising index
Who’s who—and who’s where—in this issue of Electrical Apparatus
COVER PHOTO: By Marcel Mayer. The management team from gobiq, a marketing agency in Dornbirn, Austria, goes over plans to launch a campaign for a nationwide supermarket chain. 2 ELECTRICAL APPARATUS | DECEMBER 2023
12con.indd 2
11/10/2023 9:14:52 AM
When inventory matters. Toshiba is the answer. Low Voltage Motors.
Our regional distribution centers throughout the U.S. are fully stocked and ready to meet your product needs. WWW.TOSHIBA.COM/TIC (US) 1-800-231-1412 03Toshiba.indd 1 Inventory_adnew.indd 1
2/7/2023 3:34:20 PM 1/31/23 3:16 PM
The Editor’s Comment
CHARLIE BARKS WWW.BARKS.COM CHARLIE@BARKS.COM
The new products we all rely on
Coming next month in Electrical Apparatus: Trends in automation; Equipment for Class 1 hazardous locations; Planning as a 60-yearold business owner; Our annual five-year Index of Articles
Read Electrical Apparatus online The entire contents of this issue are available online. Scan the QR code below:
Or enter the URL directly: https://bit.ly/ DEC23BUYR See page 50 for links to upcoming issues that you can bookmark.
Although it might sometimes feel like half the world’s work is in the ether in 2023 (or perhaps more accurately, in the “Cloud”), tangible, cold hard products are still a major part of our everyday and work lives. Whether it’s the tools we use to repair equipment, the technology we utilize to keep track of inventory, or the equipment itself, products are everywhere. In our final edition of this calendar year, products are the focal point. In this month’s cover article (“From concept to customer,” page 29), EA Contributing Writer Bill O’Leary takes us through how a product comes to market. Products also harbor inherent global connections when considering things like trade and the supply chain. In this context, EA Contributing Editor William Wiersema analyzes a hot topic: China’s economic standing in the postpandemic world (“China’s standing post-pandemic,” page 36). For those of you who’ve been keeping an anxious eye on China and its effect on U.S. markets, you’ll find things have changed due to the country’s “Zero Covid” policy and supply chain breakdowns. On the home front, products are being constantly affected by regulations and standards. As EA Contributing Writer John Malinowski writes this month: With the DOE developing so many regulations on various appliances (including electric motors), how can individuals become involved? John breaks down the avenues for doing so. (“Why get involved with standards?” page 33.) The December “EA Reader Profile” (page 14) features Andrew Eklind of B&D Industrial, who possesses a thorough understanding of the ins and outs of modern marketing — a crucial aspect of product development. For you “talkers” out there, this is certainly a worthwhile read. We also have an extended “Product Showcase” section this month (page 38) featuring everything from new tech equipment to a new line of tools from a major manufacturer. While most of this edition focuses on products, this month’s “Say it Right” is a specialty of journalists — and who better than EA Engineering Editor Dick Nailen to educate us all on the subject: acronyms. While clarifying the distinctions between engineering and science, Dick recalls a comical mishap from a 2016 conference where the acronym ETS could have stood for a number of different organizations. Was it the European Thermoelectric Society? Electrical Transmission & Substation Structures? The Energy Thought Summit . . . or perhaps even the European Turfgrass Society? You’ll find out in “Cracking the Code” on page 16.
Electrical Apparatus 17 N. State St., Suite 1650 Chicago, Illinois 60602 (312) 321-9440; fax (866) 228-7274 E-mail: EAMagazine@barks.com www.barks.com Founded 1948 as Volt/Age Horace B. Barks, Founding Publisher Elsie Dickson, Founding Publisher STAFF Elizabeth Van Ness, Publisher Kevin N. Jones, Senior Editor Richard L. Nailen, Engineering Editor Charlie Barks, Managing Editor Contributing Editors William H. Wiersema John Malinowski Special Correspondents Jane Powell Campbell Christopher Wachter Staff Artist: Bernie White Cartoonists John D’Acunto Tim Oliphant ElectroMechanical Bench Reference Supplement mailed with the December issue Elizabeth Van Ness, Editor & Publisher ADVERTISING Barbara Wachter, Advertising Director CIRCULATION Circulation@barks.com Electrical Apparatus (ISSN 0190-1370), Vol. 76, No. 12, is published monthly by Barks Publications, Inc., 17 N. State St., Chicago, Ill. 60602; (312) 321-9440; fax (866) 2287274. www.barks.com. Periodicals postage paid at Chicago, Ill., and at additional mailing offices. Postmaster: Send address changes to Electrical Apparatus, c/o Barks Publications, Inc., 17 N. State St., Suite 1650, Chicago, Ill. 60602. PM #40830553. U.S. subscriptions: 2 years—$85; 1 year— $50. Foreign airmail: 2 years—$200; 1 year—$110. Subscriptions also include an annual directory supplement, the ElectroMechanical Bench Reference. Single copies: $9 each plus postage; December issue, $24 with the supplement ElectroMechanical Bench Reference. Copyright 2023 Barks Publications, Inc. Reproduction of any part, by any means, including photocopy machines and computer networks, without the written permission of Barks Publications, Inc., is prohibited. Electrical Apparatus and ElectroMechanical Bench Reference are trademarks registered with the U.S. Patent Office. Copies of articles in print or PDF format may be ordered from our Marketing Department (312) 321-9440. Prices available on request. Libraries and companies registered with Copyright Clearance Center, 222 Rosewood Dr., Danvers, Mass. 01923, should send 75¢ per page copied direct to CCC. Material also available in microform and CD-ROM from Pro Quest information service, (800) 521-0600 ext. 2888 (US) or 01734-761-4700 (International); https://www. proquest.com/. Printed in the U.S.A.
4 ELECTRICAL APPARATUS | DECEMBER 2023
12com.indd 1
11/10/2023 9:20:16 AM
Let’s Solve Your Problem Using 208 volt motors on a 230 volt circuit You once discussed the issue of applying a 230 volt motor on a 208 volt circuit. Our problem is just the opposite. What should we expect from using motors rated 208 volts on a 230 volt circuit? Standard “system” voltage would be 240, not 230; but that’s a detail. NEMA standards allow 10% overvoltage on any motor, which for a 208 volt machine would be 229 volts. Locked-rotor current will go up 25% or more, leading to difficulty in properly selecting starter overloads or other protective devices. Motor noise will increase; power factor will drop. Efficiency may drop slightly, but the motor probably won’t overheat; losses should either increase only slightly or decrease. If you do have a 208 volt circuit, a motor rated at 200 volts should be selected. Most manufacturers have standard models available from stock. If the actual system voltage reaches the 250-260 range, though, you can expect serious problems such as magnetic saturation of the motor core with consequent high current and overheating.
Pull-in torque: not for induction motors Motor catalogs and other publications define the values of locked-rotor and breakdown torques for standard a-c motors. Someone is asking us about “pullin” torque, which doesn’t seem to be shown anywhere. How is it defined, and at what speed? Pull-in torque exists only for synchronous machines, not for induction motors. It’s the amount of torque the motor can develop to pull its load into synchronism. Normally, this occurs at about 96% of synchronous RPM.
12let.indd 1
For induction motors, “pull-up torque” is defined as the lowest torque value occurring anywhere between zero RPM and the breakdown point. For polyphase motors, minimum values are typically defined in NEMA Standards MG 1 Part 12 as from 5% to about 30% below the locked-rotor value, depending upon rating; for single-phase motors, as the fullload value. Speed at the pull-up point is not defined.
What constitutes a ‘severe duty’ motor? We’re often asked to supply motors for “severe duty.” Many manufacturers advertise this capability, but the features aren’t always the same. What is really expected? The usual meaning of “severe duty capability” today is compliance with IEEE Standard 841, written for the petrochemical and other process industries. What’s implied by the term (undefined in NEMA standards) is a degree of resistance to attack by contaminated atmospheres, notably chemicals and moisture. The current IEEE 841-2021 standard states: “Many of the specified materials and components in this standard stem from experience with severely corrosive atmospheres and the necessity for safe, quiet, reliable, premium-efficiency motors.” Motor features include, among other things: passage of specific corrosion resistance tests for nameplate and bearings, non-contact rotating labyrinth bearing seals, and cast-iron frame and bearing brackets. Each motor is also supplied with a test sheet showing balance and no-load test. Of course, meeting IEEE 841 cannot guarantee long motor life in every application, but it appears to be the only criterion currently in the marketplace. Most motor manufacturers offer compliant products.
The current IEEE 841-2021 standard clearly defines what motors and options can be nameplated with the IEEE 841 compliance. It now also defines what features can be added to a motor when the motor is nameplated as “IEEE 841 features,” and it defines what features cannot be on either of these designs. Beyond the IEEE 841 motor, most manufacturers have a line of severe duty motors with features that fall short of the 841 designs. Motors suitable for washdown duty in food processing may also fit into a severe duty category.
Motor carrying rated horsepower at 50 Hz We get a lot of motors in our shop to rewind for cycle change from 60 to 50 Hz. I need to know: Upon rewinding such a motor, is the motor restored to full nameplate horsepower rating for operation on the 50 Hz power supply, and does the same apply to transformers? A motor’s horsepower rating is based on temperature rise. Because motor ventilation is much less at the slower speed, the power output capability at 50 Hz must usually be reduced from its 60 Hz value. Since the motor is operating at 5/6 speed on 50 Hz, it must produce 6/5 the amount of torque to produce the same horsepower. But this depends upon the specific design. A motor with 1.15 service factor at 60 Hz may lose that overload capability at 50 Hz. Some machines may need a reduction of one horsepower rating for the lower frequency, and others may have enough reserve to work. The same limitation doesn’t apply to transformers because their cooling is independent of frequency, unless cooling fans are provided that will run slower at the lower frequency. EA Edited by the EA staff
ELECTRICAL APPARATUS | DECEMBER 2023 5
11/10/2023 9:21:32 AM
Business An autumn harvest of financial reports Each year, late October brings crisp autumn weather, noticeably shorter days, trick-or-treaters — and a wave of corporate earnings reports that often provide clues as to how particular industrial sectors are faring. This year was no different, as a number of major suppliers to the electrical industry filed quarterly financial reports that, considered together, appear to document continued recovery from the industrial slowdown, monetary inflation, and supply-chain snags that were consequences of the global pandemic and the war in Eastern Europe. Swiss industrial giant ABB attributed much of a strong third quarter to growth in North America, particularly in the U.S. “From a geographical perspective, the Americas region was the growth engine for orders, driven by double-digit comparable growth in the United States and supported by the timing of large orders booked,” said Björn Rosengren, ABB’s CEO. Gross profit worldwide, at $2.7 billion, represented an 11% increase over the same period the year before. Income from operations grew 78%, to $1.3 billion. Genuine Parts Co., of which industrial products distributor Motion Industries is a wholly owned subsidiary, saw double-digit earnings growth for the quarter ended Sept. 30 as the company continued to simplify its business while improving productivity and efficiency. Sales were $5.8 billion, a 2.6% increase over the same period the prior year. In the Industrial Parts Group, sales were $2.2 billion, up 0.6% from the same period in 2022. Paul Donahue, chairman and CEO, said that earnings growth was “driven by benefits from the mix and geographic diversity of our businesses as well continued progress on our strategic initiatives.” Almost as if while no one was looking, General Electric has gone from being your grandfather’s boring, predictable industrial investment to being a nimble player
Siemens Energy stock slips on wind energy woes
Stock in Siemens Energy fell to record lows in late October after the company said it had turned to banks and the German government to guarantee some long-term projects that are struggling financially. Siemens Energy stock declined as much as 39%, hitting its lowest level since the company was spun off from Siemens in 2020, the Wall Street Journal reported Oct. 26. Siemens Energy said it expected its wind business, Siemens Gamesa, to record lower revenues and higher losses than market expectations through the company’s next fiscal year. The company issued a similar warning last June when it withdrew its profit outlook for 2023 because the wind unit’s turbine components were failing more often than expected. “Clean-energy companies, including those focused on both wind and solar, have come under pressure in recent months from rising interest rates,” the Journal noted. “The challenges created by higher borrowing costs build on years of supply-chain disruptions from the Covid-19 pandemic and higher costs.” — KJ
— brgfx / rawpixel.com / Freepik illustration
in the aerospace and renewable energy sectors — a point driven home by the company’s most recent financial report. For the quarter ended Sept. 30, GE Aerospace delivered double-digit growth in orders, revenue, and operating profit, while GE Vernova — the company’s energy business — saw strong revenue and operating profit growth in renewable energy and power. Orders, at $17.9 billion, represented a 19% increase over the same period the year before, while revenues, at $17.3 billion, were up 20%. The company plans to spin off GE Vernova and launch GE Aerospace during the second quarter of 2024. WEG Electric Corp., the global manufacturer of electric machines and automation systems, saw a 35.4% return on invested capital for the third quarter, compared with a 27.9% return reported for the third quarter of 2022. Net operating revenue grew 2.1% compared to the third quarter of last year; it was down 2.8% in the company’s domestic market of Brazil and up 6.9% in the external market. In the external market, “Long-cycle equipment, such as high-voltage motors and automation systems, contributed positively to the results, reflecting the order backlog built in recent quarters,” according to the company. The upbeat news from Swedish bearing and seal manufacturer SKF is that for the third quarter of 2023, the company saw “resilient margins and strong cash flow despite a slowdown in demand.” Rickard Gustafson, president and CEO, attributed the company’s financial resilience to disciplined management of costs, pruning of the company’s portfolio, and reducing working capital “whilst continuing to invest in innovation and further improving our manufacturing footprint as part of our strategic transformation and new decentralized way of working.” SKF’s net sales for the quarter were 25.8 billion Swedish krona, compared with 25.0 billion the same quarter the year before. Strong sales growth in Europe, the Middle East, and Africa, in particular, was driven by a strong performance in the railway and aerospace businesses. “In the Americas,” the company said, “we noted a negative growth by 4% driven by OEM customers destocking and a phaseout of lower-profit businesses.” Finally, industrial products distributor W.W. Grainger, citing “a reasonably steady demand environment,” saw robust increases across the board, some in double-digit percentages, for the quarter. Sales of $4.2 billion represented a 6.7% increase over the same period the year before, while operating earnings were up 10.7%, to $667 million. Strength in gross profit margin was attributed partly to improving supply chain efficiencies. “As we look to the final quarter of 2023, we remain focused on providing a flawless experience for customers and positioning the business for long-term, profitable growth,” said the company’s optimistic chairman and CEO, D.G. Macpherson. — Kevin Jones EA
6 ELECTRICAL APPARATUS | DECEMBER 2023
12bus.indd 1
11/10/2023 9:22:15 AM
formerly
OVER 25 YEARS OF PARTNERSHIP FROM COAST TO COAST For more than two decades, Bartlett Bearing has partnered with JTEKT, formerly known as Koyo, to offer a range of high-quality, durable ball, needle, and roller bearings for demanding applications. From the smallest bearing to the largest, our team remains dedicated to giving you the right solution at the right time. Bartlett Bearing is proud to offer the same unbeatable service and support for all your bearing needs.
WHY CHOOSE BARTLETT Same-day Shipping
Technical Support
On-the-shelf Inventory
24 / 7 / 365 Availability
AUTHORIZED DISTRIBUTOR JTEKT part of the Toyota / Lexus family of companies bartlettbearing.com | 800-523-3382 | sales@bartlettbearing.com
12Bartlett.indd 1 12- 2023 Full Page.indd 1
11/10/2023 9:48:17 AM 11/8/2023 12:39:42 P
Know Your Industry That’s so metal! Precision Machined Products Association Founded: 1933 Headquarters: 6880 W. Snowville Rd., #200, Brecksville, Ohio 44141 Annual dues: Dependent on membership type Phone: (440) 526-0300 E-mail: invo@pmpa.org Website: www.pmpa.org There is a popular phrase in the rock music world: “That’s so metal,” which describes a song or something as hardcore likened to heavy metal music. But in the most literal sense, the Precision Machined Products Association, or PMPA, is so metal. Probably because most PMPA members manufacture metal products. The association, founded in 1933, is focused on the success and future of the machined products manufacturing industry, which is composed of companies creating “highly engineered components to customer specifications using a variety of materials,” according to PMPA. These materials range from steel and aluminum to brass and even plastics, but all of the materials are manufactured from machines like CNC lathes, automatic screw machines, and rotary transfer machines, to name a few. The resulting products are components in medical devices, construction equipment, automobiles, appliances, and more. You can almost guarantee you
The Precision Machined Products Association offers several in-person events each year where members — metalheads? — can meet, mingle, and discover that — PMPA photo they’re truly, as the association likes to say, “better together.”
will see something made with precision machine products in your everyday routine. Miles Free, director of industry affairs, describes the precision machining industry as “accounting for over 103,200 jobs with payrolls of $5 billion and shipments of over $16.9 billion.” He also mentions that “about one-third of PMPA’s members are suppliers” along with others who are “producers of tooling, software and accessories, and metalworking fluids.” To support this industry, the PMPA offers an assortment of services and programs, ranging from industry trend lists and discounts to networking opportunities and online education sessions. The association’s more than 400 Please turn to page 10
New miniaturized design!
Motor Tester & Winding Analyzer Electrom Instruments is proud to introduce the new iTIG IV Series motor tester and winding analyzer. Smaller, faster, and lighter than ever! Now with faster automatic testing and a lightweight construction, the iTIG IV offers accurate and reliable testing in a rugged and compact case.
See what makes the iTIG IV more portable than any previous generation. Scan the QR code to visit the iTIG IV Product Page for complete details.
www.electrominst.com | +1 720.491.3580 8 ELECTRICAL APPARATUS | DECEMBER 2023
12kyi.indd 1
11/10/2023 9:22:58 AM
Codi- .· -
1
D
,. - . , _ ic ::__ ------·
... 1,
,,..,
..
) ..,
Ce- ·e�.r/ �) ,
;.co,�
---=- __ -=--Founded in 1973, by Bob Ross, Jasper Electric has provided quality motor .Ji
__J
•. Majority woman-owned busines
J
and rotor repair by being on the cutting edge of technology and using high-quality materials, such as Ml 9 electrical steel. Handling large and small motors alike, we are the future. We have almost every tool needed to repair or rebuild your rotor and stator. Most motors we repair will run as efficiently if not better than when they were new from factory. Our personnel allow us to work smoothly while giving our customers a peace of mind.
JASPER ELECTRIC MOTORS INC.
The Electro,Mechonlcol Authority
& Armature Cores• Fiber Optic Laser Cutting• Large Machine Shop• Water Jet• Loose Lams
Core Loss & 15' VPI
Motor Load Testing
Laminations
, 300 KVA 20 HP to 10,000 HP
, Full 4-Hour load test available or until
• Punch or laser cut
• Computer printout sent with eidl .klb
temperature stabilizes
• Pole pieces (laser cut)
, Water stripping for fmn v.ound stators
, Load test up to 1500 HP A(. 925 HP DC
• Any size or thickness
, Full rewindwith 15ftVPI available
, Voltage test up to 7200 volts A(, 600 volts DC
• Emergency pick-ups
, 1 HP to 10,000 HP
, Run test as long as necessary, 7500 HP
, Emergency deliveries
New Rotors
• Infrared hot spot check on each job
, Government and utility approved
, Segment or whole
• All copper alloys to match conductivity
• Quality core loss report with each job
• Synchronous motor testing
• Estimate over the phone
, Normal turnaround 15-24 Days
, Loop testing for 10,000 HP+ stator cores
, Computer print-out with efficiency rating
, R.D.T. Available • On-site quotes and repairs • Stacked in your housing, spider/shaft or shipped loose
• In house aluminum and copper extrusion , R.O.T. Available
I
TWO SERVICE LOCATIONS!
.Box 1494 • 175 Curry Hwy•Jasper AL 35502 205-384-6071 • Fax 205-384-6073 jemi@bellsouth.net /-,01
�m/
I
01Jasper.indd 11 12Jasper.indd 02Jasper.indd 1
22673 Hand Rd • Harlingen • Texas 78552 956-421-2446 • Fax956-421-3616
info@newcoreinc.com
{!;
G NEW CORE Gt INC.
newcoreinc.com
FACEBDDK.CDM/ NEICDREINC
INSTAG RAM.COM/ NEICDREINC
12/21/2021 11/16/2022 1/6/2023 12:22:06 11:58:54 6:46:12 PM AM PM
KNOW YOUR INDUSTRY continued from page 8
member companies, mostly based in the U.S. and Canada, have daily access to the PMPA resources. Free says that “despite the fact that our member companies are competitors, our association facilitates distributed problem-solving on technical, material, process, and regulatory issues.” He works closely with members on technical guidance and authors the PMPA blog, “Speaking of Precision.” The member knowledge center contains links to articles, podcasts, industry reports, and webinars divided into two ways to consume information: by format or by topic. While some of the content is only accessible to members, one of the industry report series any visitor to the PMPA website can see dives into subcategories of the precision machining industry like the manufacturing of motors and generators, dental equipment, plumbing fixtures, and many other subcategories. For example, the report on motor and generator manufacturing features some terminology and brands familiar to EA readers. It lists the top five companies in this subcategory, which make up 84% of the motor and generator manufacturing industry’s sales. Networking at the three national meetings is another benefit of membership. The PMPA hosts the National Technical Conference, which includes the latest technology and knowledge for precision machining professionals. The other two national meetings are the Management Update and the Annual Meeting. As Miles Free describes them, the Management Update meeting is “devoted to better understanding business challenges and practices” and the Annual Meeting is “for C-level leaders and owners to discover and share their unique issues with respected peers.” This year’s National Technical Conference, held at the Huntington Convention Center in Cleveland last April, took place right before the Precision Machining Technology Show and offered free educational sessions. The Precision Machining Technology Show, or PMTS, presented biennially by the PMPA, combines the networking and educational components of each of the
national meetings with exhibits of the latest industry solutions and machining demonstrations. The 2023 PMTS trade show featured its largest number of exhibitors with more than 300 organizations displaying machining demos and so much more. It was co-located with the day-long Parts Cleaning Conference, so all attendees had access to both events. And if you attended the PMPA National Technical Conference before the Precision Machining Technology Show, you lucked into a triple treat of industry networking and education. One of the key topics at PMTS 2023 was digital transformation on the shop floor. This will look different for each manufacturer, but the common link for all companies is connectivity and using data for more efficient processes across the board. An effective shop floor digitization will enhance the job of quality managers, which is music to a precision manufacturing company’s ears. Safety is also a consistent topic at the PMTS show while also showing up in many of the articles available to PMPA members on the association’s website. Much of the safety conversations delve into OSHA regulations, but one of the recent PMPA articles examines the correlation between comfortability and safety. If your safety gear is chaffing and uncomfortable, you might have a difficult time concentrating on your job, which could lead to potential safety violations or workplace injuries. The article even includes some guidelines for comfortable safety gear. The Precision Machined Products Association may be a large organization, but it makes the effort to include issues of importance to all members. And if you ask me, that is so metal. — Kristine Weller EA
10 ELECTRICAL APPARATUS | DECEMBER 2023
12kyi.indd 2
11/10/2023 9:23:03 AM
12Teco.indd 1 12Teco.indd 1
11/13/2023 7:50:10 AM 11/23/2020 12:04:08 PM
Associations locally within the instrument, are displayed on an integrated 10.4 touch screen that’s viewable in daylight. The U.K.’s Association of Electrical & Mechanical Trades held its sixth an- If the analyzer is connected to the internet, results are nual awards ceremony at the DoubleTree by Hilton in Coventry, West Mid- automatically synchronized with a Cloud-based applilands Nov. 23, and while the event occurred after this issue of Electrical Ap- cation that provides additional options for analysis, reparatus went to press, we thought it worthwhile nonetheless to look at the porting, and archiving. products that were finalists for the Product of the Year Award. Any product Menzel Elektromotoren. This German maker of large that makes it this far in the awards process deserves a close examination. industrial motors gained attention in this year’s AEMT In alphabetical order, the four finalists for AEMT Product of the Year were: awards proceedings partly for its pressurized EXP moABB. The Swiss industrial giant was up for the Product of the Year Award tors for Zone 1 operation, which roughly corresponds for its IE5 SynRM Increased Safety to what we in the U.S. would refer to motor, which the company says is as flame-proof motors for operation the first motor in the world to delivin explosive atmospheres. er IE5 ultra-premium efficiency for The Menzel system allows large explosive environments — a claim modular motor operation in Zone 1 that EA is unable either to confirm CACA or CACW, normally from 450 or to refute. (IE5 motors are equivamm frames and larger at all voltage lent to what we in the U.S. cumberratings, according to the manufacsomely call Ultra Premium Efficienturer. The motors are built to site cy. As the late Dan Jones, president requirements and to the “highest of Incremotion Associates, used safety standards,” Menzel says. to say, “What’s next? Super-Duper The motors are intended for cusABB’s IE5 SynRM Increased Safety motor Premium Efficiency?”) tomers that operate larger motors As an extension of ABB’s IE5 SynRM synchronous reluctance motor line, in hazardous areas — typically refineries and chemical the Increased Safety motors offer users in hazardous areas not only addi- plants, but also in the oil-and-gas industry. These are tional safety but also a boost in energy efficiency, with up to 50% lower en- applications where ignitable gas must be prevented ergy losses compared to commonly from entering the machine. used IE3 motors, according to ABB. Preformed Windings. Like ABB, This new version of the IE5 SynPreformed Windings of Rotherham, RM motor has been developed for U.K., is a regular presence on the use in potentially explosive atmoAEMT awards stage. The Rotherspheres across a wide range of variham, U.K.-based company won the able-speed applications. The moProduct of the Year Award in 2022 tor is said to offer accurate control for its QualCoil H coil series. and high efficiency throughout the This year the company was up speed range, “even at partial loads,” for an award for QualCoil Life, Preaccording to ABB. formed Windings’ latest HV diaA noteworthy benefit of these momond coil specification. QualCoil tors, according to ABB, is that they Life is designed for hydro generarun cooler than standard designs. tors and critical assets that cannot Megger Baker’s ADX automated static motor analyzer “Bearing temperatures are reduced be allowed to fail unexpectedly. by up to 15°C and winding temperatures by up to 30°C,” which increases These can also include applications such as in the reliability, prolongs the motor’s life, and reduces maintenance needs, ac- nuclear industry and essential manufacturing and procording to the company. cessing applications. Megger Baker. This well-known U.K.-based diagnostic instrument maker The product was developed during more than 10,000 (with U.S. operations headquartered in Fort Collins, Colo.) was in the running hours of R&D over 12 months in Preformed Windings’ for its ADX automated static motor analyzer, a test instrument that combines labs. It has been independently tested to simulate several capabilities with flexible options for viewing and storing data. through-life performance. The product achieved more Depending on the model you than 2,000 hours of VE testing succhoose, the portable ADX analyzer cessfully. can provide high-voltage tests for The company says that QualCoil surge, turn-to-turn partial disLife offers such through-life bencharge, insulation resistance, poefits as reduced partial discharge, larization index, d-c hipot, or step improved efficiency, and reduced voltage tests, as well as low-voltage maintenance that’s seen on the widtests for winding resistance, inducer range of QualCoil specifications tance, and capacitance. available. QualCoil Life is available All ADX analyzers offer the option for machines up to 13.8 kV. of manual, automatic, or sequenced You can find out who won this testing. They also support configuyear’s AEMT Product of the Year rable route-based site testing and Award, plus read about all of the incorporate a number of asset manother awards categories, by visiting A Menzel Elektromotoren pressurized EXP motor for agement tools. Test results, stored www.theaemt.com. — Kevin Jones EA Zone 1 operation
New products that vied for AEMT award recognition
12 ELECTRICAL APPARATUS | DECEMBER 2023
12assns.indd 1
11/10/2023 9:23:59 AM
Calendar Update your calendar with these upcoming trade shows, conferences, and other events.
• January 22-24, 2024 — AHR Expo, McCormick Place, Chicago. Air-Conditioning, Heating, and Refrigeration Institute, https://www.ahrexpo.com. • January 30-February 2, 2024 — NEMRA24 Conference, Virgin Hotels Las Vegas, Paradise, Nev. National Electrical Manufacturers Representatives Association, https://www.nemra.org/nemra24conference. • February 25-29, 2024 — Hydraulic Institute 2024 Annual Conference, Ponte Vedra Beach, Fla. The Hydraulic Institute, www.pumps.org/conferences. • February 26-March 1, 2024 — PowerTest 2024, Hilton Anatole, Dallas, Tex. InterNational Electrical Testing Association, www.powertest.org/powertest/home. • April 7-9, 2024 — EGSA Spring Conference, Hyatt Regency Miami, Miami, Fla. Electrical Generating Systems Association, https://egsa.org/Events/Future-Con ferences. • April 19-20, 2024 — PEARL Annual Conference and Exhibition, Westin Denver Downtown, Denver, Colo. The Professional Electrical Apparatus Reconditioning League, https://pearl1.org/2024-confer ence. • April 22-26, 2024 — Hannover Messe 2024, Hannover Fairgrounds, Hannover, Germany. Deutsche Messe AG, www.hannovermesse.de/en. • May 6-9, 2024 — CleanPower 2024, Minneapolis Convention Center, Minneapolis, Minn. American Clean Power Association, https://cleanpower.org/events/ cleanpower-2024-conference-exhibition.
The Virgin Hotels Las Vegas will be the setting of the National Electrical Manufacturers Representatives Association’s conference Jan. 30 through Feb. 2, 2024. — Virgin Hotels photo
• May 14-16, 2024 — CWIEME Berlin, Messe Berlin, Berlin, Germany. Coil Winding, Insulation & Electrical Manufacturing Exhibition, https://berlin.cwiemeevents. com/Home. • May 21-23, 2024 — National Association of Electrical Distributors 2024 National Meeting, JW Marriott Austin, Austin, Tex. National Association of Electrical Distributors, www.naed.org/nationalmeeting. • June 22-24, 2024 — 2024 ASHRAE Annual Conference, JW Marriott Indianapolis, Indianapolis, Ind. American Society of Heating, Refrigerating and AirConditioning Engineers, www.ashrae.org/ conferences/2024-annual-conference-indi anapolis. • June 23-26, 2024 — EASA Convention 2024, Caesars Forum and Harrah’s Casino Hotel, Las Vegas, Nev. Electrical Apparatus Service Association, https:// easa.com/convention. • August 7-9, 2024 — Safety 2024 Conference & Expo, [venue to be announced],
Denver, Colo. American Society of Safety Professionals, https://safety.assp.org. • September 9-14, 2024 — IMTS 2024, McCormick Place, Chicago. International Manufacturing Technology Show, www. imts.com. • September 15-17, 2024 — EGSA Fall Conference, Hyatt Regency Bellevue, Bellevue, Wash. Electrical Generating Systems Association, https://egsa.org/Events/ Future-Conferences. • October 7-10, 2024 — The Battery Show North America, Huntington Place, Detroit, Mich. The Battery Show, www.thebatteryshow.com/en/home.html. • October 15-17, 2024 — Fabtech 2024, Orange County Convention Center, Orlando, Fla. Fabtech Event Partners, www.fabtechexpo.com. • October 28-30, 2024 — Offshore Windpower Conference & Exhibition, Atlantic City Convention Center, Atlantic City, N.J. American Clean Power Association, https://cleanpower.org/offshore-wind power. EA Edited by Kevin Jones
Your Universal Servo Motor Test Station!
NEW Developments in Technology, Training, and Support!
Mitchell Electronics, Inc. Athens, OH 740-594-8532 sales@mitchell-electronics.com www.mitchell-electronics.com
Manufacturer Support List Continues to Grow ... Allen Bradley. B+R. Baumuller. Berger Lahr. Bosch/Rexroth/lndramat. Elau. Fanuc, Heidenhain, Kawasaki, Matsushita, MFE, Mitsubishi, Nachi, Sanyo Denki, Sick Stegmann, Siemens, Sumtak, Tamagawa, Yaskawa, and many more ..
12cal.indd 1
ELECTRICAL APPARATUS | DECEMBER 2023 13
11/10/2023 9:24:32 AM
EA Reader Profile The very model of a modern marketer Speaking with a disarmingly ingratiating southern accent and immeasurable energy and enthusiasm, Andrew Eklind makes whomever he is talking with feel immediately at ease. He is hospitable, sincerely interested, and eloquently articulate. Andrew jokes, “I like to think that marketing is, like, that talkative person within a company, that person who talks way too much, and you’re like, ‘What do they do?’” Listening to Andrew, it becomes quickly obvious that marketing is much more than just talking the talk. “You have your engineers creating products. You have your sales team in the field trying to sell the product. Marketing takes information from the engineers, creates, let’s say, a brochure and gives that as a tool to sales to explain the how and the why.” “Marketing uses,” Andrew passionately argues, “efficient methods to get the word out” to the customer. In the past 20 years, understanding of the customer has dramatically changed. Thanks to the internet, customers have become a lot smarter and educated about products they need and use as well as about competing products. In this fast-moving and competitive environment, “You have to create interest and capture interest,” Andrew says. This might mean targeting customers in a special and unexpected way, using guerrilla marketing, for example. “Nowadays, it’s more about who’s in front of the customer at the right time.” Customers have also come to expect more personalized information and speedy service tailored to their specific needs. Examples of targeted marketing are programmatic target marketing, which is a method of marketing based on the person’s job title, industry,
Andrew Eklind, a natural talker, understands the importance of listening. — Andrew Eklind photo
company motive, etc., and Pay-per-Click (PPC) marketing, using search engines and social media. Another is geo-fencing, using mobile devices and apps for people within a specific set or location. Andrew is a strong advocate of intelligent automation in marketing. Online forms, for example, get important information from potential customers sent directly to the proper company personnel quickly. This does away with manual intervention and reduces lead times. “That creates a good first impression. When you do that, the customer sees you’re on top of it.” Marketing, according to Andrew, is no exception to how technology has become central to rationalizing and making processes more efficient. “While a lot of these tools cost money,” he admits, “they will save you money in the long run and provide a better experience over outdated methods—an experience your customers will come to expect.” Andrew is not only a modern marketer with a degree in international marketing, he also, “as a person, enjoy[s] the engineering side of the world.” Smiling, Andrew puts his success down to the fact that he’s “half engineering brain, half marketing brain.” This combination has made him successful as a marketer in the industrial sector. According to Andrew, a thorough understanding of the product and the industry is a definite must for marketers. He sees the marketer as “the salesperson to the people you mostly don’t ever meet in front of you.” He adds, “You’ve got your canned speech, right, but when they ask that ‘weird’ question, the moment they throw up that first flag of resistance, you need to have an answer for it. . . . If you don’t understand the question, you’re kind of dead in the water to the customer. They’ve discovered you are skin deep.” Andrew likes to dive deep into everything he does. As a child, he was so interested in how things worked that one day, at the age of six, he took apart his toy electric piano, much to the disbelief of his mum. “Obviously, I wasn’t playing the piano too much, but I was fascinated by how it worked. And that’s kind of continued throughout my whole life. I’m very hands on.” From a very early age, he has always had that work ethic of getting out there, getting things done and learning. As a young kid, he would go door to door with his little neighborhood friends washing cars and cutting yards. They even organized a neighborhood Olympics, for which they sold tickets. At the end of middle school, Andrew was washing dishes at a company “under the table” before he was legally old enough to work. When he was 15, his mother would drive him to his shifts at Chick-fil-A. After high school, he joined a Toyota car dealership and worked his way up from parking cars to being an ASE-certified car technician. Since then, he has patented a charging cell phone case, worked on prototypes for headgear with an in-built fan-driven cooling system, and auditioned with his brother for Shark Tank. He loves watching “How It’s Made.” When working in marketing at a global industrial electric motor manufacturer, he started subscribing to Electrical Apparatus to read all about electric motors. Andrew never stops doing things. He worked his way through college, where he studied international marketing. He did landscape gardening during the day, went to classes from 3:00 p.m. to 9:00 p.m., and worked for an event management company at nighttime. As part of his degree, he studied Chinese and spent two months in Shanghai. Andrew speaks and writes Chinese at a good level.
Andrew jokes, “I like to think that marketing is, like, that talkative person within a company, that person who talks way too much, and you’re like, ‘What do they do?’”
14 ELECTRICAL APPARATUS | DECEMBER 2023
12profile.indd 2
11/10/2023 9:25:10 AM
“It was awesome, it was so cool. They respect you a lot more when you can speak their language,” he says. This experience, the degree in international marketing, numerous visits to London with his brother to visit their aunt, and trips with her throughout Europe have taught him that “there’s not just one way of doing things.” To be successful in marketing “you have to learn your audience.” After ten successful years as a marketing manager — five years at Techtop Industries and five years at MIURA — Andrew took on the position of marketing director at B&D Industrial a few months ago: “My basic goal is to increase awareness, which increases sales, and position While spending time in Shanghai as part of his studies in international marketing, Andrew Eklind found — Andrew Eklind photo the product in a way that it’s a good time to visit China’s Great Wall. fit for the customer. . . . Marketing can go through the whole entire company. It’s about making things better.” he had heard in the next marketing campaign or prodThis involves engaging in a constant dialogue with people throughout the uct. company. “I love those conversations because they help me refine the mar“You know,” he says, “some people listen in order to keting tool kit. That’s how we have the best answer for the customer and talk. . . . When I listen, it’s in order to understand.” And show them the value of the product.” when all the listening and talking has been done, AnAndrew also wouldn’t miss conversations with customers at trade shows, drew never tires of walking the walk. — Colin Gregorygetting down to talking about the nitty-gritty of products, listening to cus- Moores EA tomer questions, and then going back to the drawing board to address what
KNOWLEDGEABLE STAFF WIDE PRODUCT SELECTION
BEST SELLERS: Pac Seal / Flowserve U.S. Seal Mfg. Advanced Sealing International Products Seal Reconditioning
407-330-0301
COMPETITIVE PRICES
www.sealdistributors.com
info@sealdistributors.com
PROUDLY SERVICING EASA MEMBERS FOR OVER 42 YEARS!
For more product information, scan this code!
ELECTRICAL APPARATUS | DECEMBER 2023 15
12profile.indd 3
11/10/2023 9:25:18 AM
Feature | Say It Right
Cracking the code Be careful when using acronyms or ill-defined phrases By Richard L. Nailen, EA Engineering Editor Abbreviations are handy. Rather than having to spell out “Institute of Electrical & Electronics Engineers,” it’s so much easier just to use “IEEE.” “USA” is quicker than “United States of America.” In technical writing, however, many of us don’t recognize what such abbreviations may mean. When we see a grouping of unfamiliar letters, we don’t know what they stand for and aren’t able to understand what’s being said. Hence a basic rule in technical (or any other) writing: At least the first time such an abbreviation is used, spell it out fully; define it for the reader. Such an abbreviation is called an acronym. A-C, D-C, RPM, RMS, VFD – anyone working with electrical machines doesn’t need to have such acronyms spelled out. But any technical writer – particularly one attempting to educate others in a specific technology – needs to follow the basic rule of spelling things out first. This is especially true when the technology involved is new – or is certainly going to be new to most readers.
Evangelical Theology Society? In 2016, the IEEE’s Industry Applications Society (IAS) issued a call for papers to be presented later that year at the first International Conference on “Advanced Research in Engineering Science,” or “ARES, to take place in Dubai (United Arab Emirates). The host for that gathering was to be the “ETS.” No, ETS was not any of the following: > European Thermoelectric Society. > Electrical Transmission & Substation Structures. > Energy Thought Summit. Nor was it the European Turfgrass Society, or the Evangelical Theology Society. No, this ETS might have been the IEEE “European Test Symposium,” described as a “well-recognized [by whom?] forum for presenting and discussing trends, emerging results, and hot topics in the use of electronic-based circuit and system testing.” Never mind. Just consider the subject of this conference: “Engineering Science.” What is engineering? There are two definitions of equal value: > The application of scientific principles to the most effective use of materials and processes for the benefit of mankind. > Doing with one dollar what any bungler could do with two.
— graystudiopro1 / Freepik photo
Clearly, the term engineering science is meaningless. Engineers make things; scientists make discoveries. The process of making things emphasizes efficiency and economy in the use of materials and energy, as well as reliability – the things made should work as intended for as long as intended when cared for as intended. All of this necessarily relies on scientific principles such as the relationships between material properties and natural forces.
Science vs. engineering But engineering is not “science,” any more than aerodynamic principles alone can produce an aircraft or the explosive power of gunpowder generate a firearm. Scientists discover basic principles and articulate physical laws. Science revealed the law of gravity, but engineers (not scientists) discover how to prevent and control the fall of an object, or how to make that object strong enough to withstand its fall. The “science” underlying the electric motor, or the steam engine, was well-known long before engineers found ways to harness it in practical machines. More recently, science led to discovery of the transistor – but only through engineering did that result in the smart phone you’re carrying. So even though some educational institutions have undertaken to offer “engineering science” instruction in their curricula, the phrase is simply a contradiction in terms. EA
16 ELECTRICAL APPARATUS | DECEMBER 2023
12say.indd 1
11/10/2023 9:27:16 AM
CO-SPONSORED BY
HVACR is changing fast Experience everything new all in one place • All the latest products + tech • The connections you need to grow your network • Best practices to level up as a professional • And so much more!
Register for free at ahrexpo.com
11AHR.indd 1
10/3/2023 9:11:37 AM
Speaking Of . . . The U.S. releases first regulations on artificial intelligence The White House on Oct. 30 issued what it described as a “landmark” executive order directed at regulating artificial intelligence technologies, the first major move of its kind, in an effort “to ensure that America leads the way in seizing the promise and managing the risks of artificial intelligence,” according to a statement. The executive order establishes new standards for AI safety and security, and contains provisions aimed at protecting Americans’ privacy, advance equity and civil rights, stand up for consumers and workers, promote innovation and competition, and more. A connection to the September innovation-themed issue of Electrical Apparatus stands out: The announcement expressed a strategy of what it described as “responsible innovation” as it courted voluntary commitments from 15 companies to drive safe, secure, and trustworthy development of AI. The document is primarily directed at addressing potential risks and threats. It is lengthy and contains many stipulations, so we EA editors did our best to break it down. The first section contains new standards, mostly requiring that developers of “the most powerful AI systems” share their safety test results and other critical information with the U.S. government. In accordance with the Defense Production Act, companies must notify the federal government when training a new AI model and must share the results of all red-team safety tests. Red team campaigns are defined as “threat-led penetration tests where the detection and response capabilities of an organization are tested . . . focusing on target objectives” and were previously organized in secret. Companies will now have to disclose these. The National Institute of Standards and Technology will set standards for “extensive” red-team testing to ensure safety before public release. Depending on your viewpoint, these moves could entail federal overreach or protection against dangerous technology. Example: The Dept. of Homeland Security will apply some of these new standards to critical infrastructure sectors and establish “the AI Safety and Security Board.”
The Departments of Energy and Homeland Security will also now address AI systems’ threats to critical infrastructure as well as ‘chemical, biological, radiological, nuclear, and cybersecurity risks’
The recently issued executive order claims it will favor human-AI interaction.
— Brookings Institution photo
The Departments of Energy and Homeland Security will also now address AI systems’ threats to critical infrastructure as well as “chemical, biological, radiological, nuclear, and cybersecurity risks.” Here, the language indicates an overlap with environmental policy looming in the future. Further verbiage in this section says it intends to guard against “biological synthesis screening,” financial fraud, and software threats. The second section of the document primarily focuses on the protection of data on the internet. This will require further action by Congress. A third section is devoted to “advancing equity and civil rights” and includes a “Blueprint for an AI Bill of Rights.” It includes a second executive order directing agencies to “combat algorithmic discrimination” — a theoretical flaw in AI that involves unfair projections. This section’s stipulations focus on areas like housing, hiring processes, and the criminal justice system. Section three zeroes in on AI in consumer markets, healthcare, and education. It promises to “advance the responsible use of AI in healthcare and the development of affordable and life-saving drugs”; “shape AI’s potential to transform education by creating resources to support educators deploying AI-enabled educational tools, such as personalized tutoring in schools”; and “produce a report on AI’s potential labor-market impacts, and study and identify options for strengthening federal support for workers facing labor disruptions, including from AI.” Further sections of the document discuss the U.S.’s role in the international development of AI technology. The U.S. already leads in AI innovation; more AI startups raised first-time capital in the U.S. last year than in the next seven countries combined. These likely have corporate implications but not many at the ground floor of a motor shop or manufacturer. EA will continue to monitor this executive order and its provisions as it develops over the next year. — Charlie Barks EA
18 ELECTRICAL APPARATUS | DECEMBER 2023
12SpeakingOf.indd 1
11/10/2023 9:27:48 AM
JOIN THE LEADING EVENT FOR THE ELECTRICAL ENGINEERING COMMUNITY Explore 600+ exhibitors across 6 halls, over 3 days
Register your interest! berlin.cwiemeevents.com
12CWIEME.indd 1 Untitled-1 1
11/6/2023 2:51:27 PM 06/11/2023 09:55
Feature | Energy
Griddle me that Three new interregional U.S. transmission lines will create jobs, the U.S. Dept. of Energy says By Charlie Barks, EA Managing Editor On Oct. 30, the U.S. Dept. of Energy (DOE) announced “up to a $1.3 billion commitment” in three transmission lines crossing six states. This will reportedly advance transformative projects aimed at adding 3.5 GW of additional grid capacity throughout the U.S., equivalent to powering approximately three million homes, and will potentially create more than 13,000 “direct and indirect jobs,” according to a DOE announcement. To ensure that transmission buildout is done in an informed and precise manner, DOE also released the final National Transmission Needs Study to provide insight into where the grid — and American communities — would benefit from increased transmission. “To realize the full benefit of the nation’s goal of 100% clean electricity by 2035, we need to more than double our grid capacity, and the White House’s Investing in America agenda puts us in position to do just that,” said U.S. Secretary of Energy Jennifer M. Granholm. “This historic effort to strengthen the nation’s transmission will drive down costs for American families and deliver thousands of good-paying jobs for American workers, helping communities keep the lights on in the face of climate change-induced extreme weather events.” The Needs Study also contends that “by 2035, we must more than double the existing regional transmission capacity and expand existing interregional transmission capacity by more than fivefold on our way to economy-wide decarbonization.”
Federal funding for connections The Transmission Facilitation Program is a $2.5 billion revolving fund aimed at helping overcome the financial hurdles associated with building new, large-scale transmission lines, upgrading existing ones, and connecting microgrids in Hawaii, Alaska, and U.S. territories. Under the program, DOE is authorized to borrow up to $2.5 billion to purchase a percentage of the total proposed capacity of the eligible transmission line. It includes the ability to offer capacity contracts, three of which are detailed below: Cross-Tie 500 kV Transmission Line (Nevada, Utah). Cross-Tie is a proposed 214-mile, 1500 MW transmission line connecting existing transmission systems in Utah and Nevada to increase transmission capacity,
Under the Transmission Facilitation Program, DOE is authorized to borrow up to $2.5 billion to purchase a percentage of the total proposed capacity of the eligible transmission line
improve grid reliability and resilience, relieve congestion on other key transmission lines, and expand access to low-cost renewable energy across the region. The bidirectional nature of Cross-Tie is expected to increase transfer capabilities in the West, unlocking increased access to renewable energy resources in the region. Construction is scheduled to start in the first quarter of calendar year 2025. The Needs Study estimates that by 2030, the Mountain region will need nearly 2,300 gigawatt-miles (GW-mi) of new transmission to unlock the power sector emissions savings enabled by Inflation Reduction Act. Cross-Tie will contribute 14% to this regional need. Southline Transmission Project (Arizona, New Mexico). This is a proposed 175-mile, 748 MW transmission line from Hidalgo County, N.M., to Pima County, Ariz., that will help unlock renewable energy development in southern New Mexico and deliver clean energy to growing markets in Arizona that currently rely on fossil-fuel generation. The Southline project, which is the first phase of a longer line, will make use of existing transmission rights of way along parts of its route, upgrading aging transmission facilities that are the source of congestion and constraints in the region. Construction is expected to begin during the first quarter of 2025. The Needs Study estimates that by 2030, the Southwest will need 935 GW-mi of new transmission to unlock the power sector emissions savings enabled by the Inflation Reduction Act. The Southline project will contribute 14% to this regional need. Twin States Clean Energy Link (New Hampshire, Vermont). This is a proposed 1,200 MW high-voltage direct current (HVDC) bidirectional line intended to expand the capacity of the New England electric grid and improve its resiliency, reliability, and efficiency by providing access to clean, reliable energy supplies in Quebec, Canada. The bidirectional design of the Twin States line will also allow the New England grid to export power to Canada when New England is producing more energy than it needs, which is expected to occur as the offshore wind industry in New England expands. Construction of the Twin States line is expected to start in the third or fourth quarter of 2026. The Needs Study predicts that the Northeast region will need
20 ELECTRICAL APPARATUS | DECEMBER 2023
12energy.indd 2
11/10/2023 9:28:21 AM
The U.S. Department of Energy recently made a major commitment to utilities funding, but it comes with a catch.
1.5 GW of new transfer capacity with its neighbors; Twin States will provide 79% to this interregional need. The Dept. of Energy anticipates releasing a second round of TFP funding in the first half of 2024 through a request for proposals that may include a combination of public-private partnerships, loans, and capacity contracts, totaling up to $1 billion.
Future transmission needs A second section of the DOE’s Oct. 30 announcement discussed the Needs Study’s assessment of current and near-term-future transmission needs through 2040. Additional findings of the study include the following: A need for additional electric transmission infrastructure in nearly all regions of the U.S. to improve reliability and resilience, address high energy costs, and reduce congestion and constraints. Regions with historically high levels of within-region congestion — the Northwest and the Mountain, Texas, and New York regions in particular — as well as regions with unscheduled flows that pose reliability risks, such as California and the Northwest, Mountain, and Southwest regions, need additional, strategically placed transmission deployment to reduce this congestion. Increasing interregional transmission — that is, the ability to move power across regions of the country — is needed to move electricity from where it is avail
12energy.indd 3
— U.S. Dept. of Energy photo
able to where it is needed, and where it results in the largest benefits to customers in reducing congestion and constraints. Historically, the data assessed show a need for transmission to alleviate transmission constraints that prevent moving electricity across the interconnection seams — between the Mountain and Plains regions and between Texas and all its neighbors. Needs will shift over time as the clean energy transition, evolving regional demand, and increasingly extreme weather events must all be accommodated by the future power grid. By 2030, large relative deployments of interregional transfer capacity are needed between the Delta and Plains, Midwest and Plains, and Mid-Atlantic and Midwest regions to meet future demands of the power grid. By 2040, there will be a significant need for new interregional transmission between nearly all regions. The Needs Study, along with other information relating to electric energy transmission capacity constraints and congestion, can inform potential designation of National Interest Electric Transmission Corridors. The study doesn’t designate any such corridors, but DOE is planning to release further guidance regarding its process for designating them. EA
Needs will shift over time as the clean energy transition, evolving regional demand, and increasingly extreme weather events must all be accommodated by the future power grid
ELECTRICAL APPARATUS | DECEMBER 2023 21
11/10/2023 9:28:23 AM
Feature | Electrical Manager
Get smart about setting goals Team member buy-in is essential for reaching your articulated objectives By Bill O’Leary, EA Contributing Writer As we reach the end of 2023, it’s important to take stock and reflect on our accomplishments. It is, perhaps, equally important to look to the year ahead and lay the tracks for future accomplishments. Ah yes, the work train keeps moving, and an effective manager not only grabs a hold and enjoys the ride but serves as an esteemed conductor leading the team to new areas of improvement. Quite frankly, this metaphor went off the tracks but let me put it another way: Goal-setting and goaltracking are one of the more important responsibilities of a manager. It gives your team a clear objective, a North Star that leads everyone over the short- and long-term and re-emphasizes areas of importance for the business. It guides. It clarifies. It revives. And it’s incumbent upon the manager to not only be instrumental in goal creation but ensure that there is steady and productive movement throughout the year.
First, choose your goals So let’s start with creation: Effective goals can be completely new areas of focus (developing new products, implementing new technology) or the next evolution of a previous goal. (We increased profit by 5% last year. Let’s go for 8% this year!) Either approach should always begin by tying ideas to our overall company’s business objectives or key performance indicators like increased market share, high customer satisfaction, or revenue growth that outpaces your competitors. These broad company goals will provide vital context for any ideas you may have for your department or team. If your goal does not align or cascade from an elevated company goal — cast it aside. It’s not aligned with the company’s path forward and you will have difficulty getting buy-in across the business. Reach out to other managers to see what their goals are and find crossover opportunities. Teamspecific, more silo-ed goals are important too, but cross functional goals can lead to more impactful Bill O’Leary is a SixSigma/Kaizen leader and a copy manager at Grainger. He notes that, “The views and opinions expressed in this presentation are my own and do not necessarily represent my employer’s position, opinion, or strategy.” — Editor
results and give you and your team members important exposure to other areas of the business. Speaking of those team members, get them involved. Goal setting is not a manager-only affair. By including your team in a goal brainstorming session, you’re identifying the needs and challenges that are most directly relevant to their work. You’re also increasing team morale by illustrating how important and valued their contributions are to your company’s future. Use an already scheduled staff meeting or set up a longer and more in-depth goal working session to gather as many ideas as you can. Make sure that you let your team members know the purpose of the meeting (how you want to hear from them about what they think your team’s goals should be) and to have them prepare by coming to the meeting with two or three ideas.
Next, refine your goals When the meeting starts, make sure that you say that even if your specific goal idea is not used, that doesn’t mean it isn’t important or that it’s a “bad idea.” Those ideas could be used at a later point. Perhaps they didn’t align with the broader company goals I mentioned earlier. Or perhaps the group just needed to slim down the list to a manageable and realistic number of goals. That number? The evergreen Rule of Threes applies here: three goals, maybe four if you’re really feeling adventurous but no more than that. Too many goals can create a fractured environment where you’re spreading yourself too thin and not making significant progress on any fronts. Add some variety to your goals. For example, three goals that target operational improvements (decreasing rework, increasing motor repair lead time), quality improvements (increased customer satisfaction, a better-designed and descriptive website), and workplace culture improvements (more team member shoutouts at meetings, year-end workplace events to celebrate milestones, robust personal development resources) provide a nice balance of focus and spread. The goals themselves should be clear, concise, and measurable. There should be no confusion about what the stated goal is trying to accomplish. When you write a goal, make sure that it is a single sentence that states the clear actions, the desired result, and how that result helps the business. Add numbers when you can: increasing market share by 2.5%, reducing scrap levels by 10%, holding four training
The goals themselves should be clear, concise, and measurable; there should be no confusion about what the stated goal is trying to accomplish
22 ELECTRICAL APPARATUS | DECEMBER 2023
12ElectMgr.indd 2
11/10/2023 9:30:36 AM
How do you define a well-conceived goal? It should be SMART: specific, measurable, achievable, relevant, and time-bound.
workshops every quarter based on the most pressing needs from your internal quality reviews. Quantifying your goals provides a clearer finish line. It can also engender stronger support from those who focus on the bottom line. Numbers reflect clear results which is what your goals should be working towards.
Then, set ‘mini-goals’ Creating goals is the easier part. Ensuring progress throughout the year — that’s the challenge. It’s human nature. We all have a bevy of different things to do in our lives, and what isn’t right in front of us can fall by the wayside. Make sure your goals win the battle for brain space by setting continuing meetings and milestones throughout the year. Establishing “mini-goals” each quarter that are borne from the larger goals will keep everything top-of-mind. For example, say you want to improve your standard operating procedures for your inventory tracking process. First quarter could be observing the current process and drafting an assessment of the biggest weaknesses and needs, second quarter could be constructing a list of detailed improvements and new team member responsibilities, third quarter would be piloting those improvements and measuring the results, and fourth quarter is where the team delivers a presentation of their work to managers across the business and creates a step-by-step implementation plan to bake these improvements into the everyday process. These “mini-goals” serve as handy reminders, but they are also a practical way to approach complex work. Long-term goals should not be something you tackle the night before a due date. It’s not the “highschooler burns the midnight oil to finish a 10-page term paper on Of Mice and Men that is due tomorrow” way of doing things. You’re segmenting these goals into digestible chunks that build on each other in logical ways. These events also give you the opportunity to assess the state-of-play. You may need to alter the goal to reflect the current reality or reset your
12ElectMgr.indd 3
— Shutterstock image
expectations to measurable accomplishments that are more achievable in light of results or unforeseen challenges. Also, designate a “liaison or champion” for each goal. This further strengthens team member engagement beyond their feedback in crafting the goal. It’s also a great development opportunity for a strong performer, giving them more challenging work and exposure across the business. Try to match an employee with a goal that aligns with their current work or area of interest. Say that you want to increase customer traffic to your site from external search. There might be someone in the office who has experience in SEO. Leverage your team members’ diverse skill sets in new ways. The goal champion is also a great way to assess a team member who is interested in leadership roles. With project management stretch work, you can determine that employee’s strengths and areas of improvements before they take the next step.
Finally . . . take a victory lap And when you reach the end, celebrate! Just like my advice in the Kaizen/operational improvement workshop article (October 2023 Electrical Apparatus, “The kaizen value stream”), celebrating successes is incredibly important for team morale. Take the team out to dinner or have a catered event in the office. It will be easy to continue looking ahead, to think about how you can maintain the improvements from these goals or find ways to take that goal to the “next level.” That good energy from meeting your goals may lead you to think about new and more ambitious goals. Tempting thinking but that time will come. There’s a reason why my first sentence of this column was to take stock and reflect on your accomplishments. Setting, tracking, and accomplishing goals are time-consuming and challenging, but incredibly beneficial work. So, take the time to enjoy your victories. Because that 2025 goal-train is leaving the station regardless. You might as well enjoy yourself before hopping on again. EA
Make sure your goals win the battle for brain space by setting continuing meetings and milestones throughout the year ELECTRICAL APPARATUS | DECEMBER 2023 23
11/10/2023 9:30:37 AM
Feature | Weftec 2023 in Photos
A world of water Here are a few of the friendly faces we encountered at Weftec 2023, the premier North American event for people who manage and process water By the Electrical Apparatus staff In addition to nearly 150 educational sessions and 17 hands-on workshops, this year’s Weftec offered displays of the latest products, services, and technologies from more than 800 companies that help hydrate and irrigate the world. On this and the facing page we offer a look at some of the exhibitors. Thirsty for more? In this month’s “Utilities” and “Pump it up,” we take a closer look at a few of this year’s Weftec educational sessions. EA
Patricia Parker of WEG proudly displayed this compact vertical high-thrust, designed by WEG to optimize the use of space.
The NSF team — Jenna Trubiano, Kristina Laszlo, Theresa Bellish, and Kathryn Foster — were available to explain NSF’s risk assessments, testing, inspection, and certification for the water industry.
— Background image created by Adobe generative AI
Situated as it is within sight of Lake Michigan, one of North America’s largest natural sources of fresh water, Chicago’s McCormick Place proved once again the ideal setting for Weftec, the annual water quality event, where, as the event’s producers say, “networks expand, ideas become solutions, and water quality innovation and expertise are on display.”
Scott Baker and Gerry Feldmeier explained Eaton’s Power Xpert microgrids, which provide a scalable solution to unexpected power loss while enhancing cybersecurity.
John Keller, owner of RK Electronics, was a David among Goliaths at Weftec, a small designer and manufacturer of custom electronic automation control components.
24 ELECTRICAL APPARATUS | DECEMBER 2023
12WeftecPhotos.indd 2
11/10/2023 9:31:35 AM
— Electrical Apparatus photos copyright 2023 by Barks Publications, Inc.
This year marked the 25th anniversary of Franklin Electric’s acquisition of Pioneer Pump, the producer of a line of pumps that the Franklin Electric crew was proud to display.
Curtis Freeman of Gorman Rupp explained the Eradicator Plus pump, which is outfitted with sharp impellers that can chop up wipes, diapers, and other bulky objects.
Atlas Copco representatives were on hand to explain the company’s Flow Series pumps, which feature enclosed impeller design and are said to offer up to 82% efficiency.
Schneider Electric’s Briana McLean showed off the SureSeT switchgear, whose compact design and integrated operation are intended to help otpimize the use of space and improve operational efficiency.
Jeff Fell and Aaron Marema of ABB proudly displayed the company’s PEMS pump efficiency monitoring system, which gives rapid information on mechanical pump performance.
Herdis Soler of Emerson with the wirelessly driven Bettis XTE3000 actuator, designed to meet the valve automation demands of the oil & gas, power, and process industries. ELECTRICAL APPARATUS | DECEMBER 2023 25
12WeftecPhotos.indd 3
11/10/2023 9:31:41 AM
Feature | Electric Avenue
Early adopters Where in the U.S. electric vehicle manufacturing is concentrated — and what may lie on the road ahead By Maura Keller, EA Contributing Writer Electric vehicles currently account for about 1% of the 250 million vehicles, SUVs, and light-duty trucks that are on the roads in the U.S. However, during the first six months of 2023, EVs, including plug-in hybrids and fuel cell vehicle sales surged, accounting for 8.9% of new car sales. Optimistic assessments estimate that by 2030, the growth of adoption of EVs should rise to approximately 25%-30% of new car sales, and hit over 50% of new car sales by 2050. So what states are “leading the charge” in electric vehicle and battery manufacturing, and what are the expected impacts of EVs?
Where EV manufacturing is strong Virginia Klausmeier is CEO of Sylvatex, a materials processing company that is innovating the lithium-ion battery manufacturing process, specifically that of the energy- and cost-intensive cathode, with a focus on sustainability and domestic production. Sylvatex is at the very start of the manufacturing process in the EV pipeline. According to Klausmeier, as far as the states in which EVs play a big role, there is a lot of investment in the U.S. in what is being called the “Battery Belt,” which runs North/South along the “Rust Belt and Deep South.” Specifically, some of the states that have seen the most investment in EV manufacturing are Georgia, Tennessee, Kentucky, Ohio, and Michigan. “We believe the reasons that there are so many manufacturers landing in the South include the proximity to customers and partners, good state incentives to moving in, and workforce and talent availability,” Klausmeier says. “When looking at proximity and workforce, it is a self-fulfilling prophecy. The more companies that land there, the more educated the local community and workforce will be, and thus, will attract even more investment into manufacturing in the area.”
K.C. Boyce, vice president in Escalent’s Automotive & Mobility and Energy practices, works with energy providers and automakers to craft products and programs that accelerate the energy transition. Boyce agrees that southern states like Georgia, Tennessee, and South Carolina are seeing a boom in EV and battery manufacturing, but the investment isn’t limited to the South. Midwestern states like Ohio and Michigan are slated for new battery plants, and even some western states like Nevada and California are getting in on the action. “The two states with the highest level of investment are Georgia and South Carolina,” says Enrique Glotzer, managing director of power, renewables, and energy transition practice at FTI Consulting. “Together with North Carolina, which is also near the top of this list, these three states have received over $33 billion in investment, or approximately half of all EV and battery related investments in the U.S. since the Inflation Reduction Act was enacted.” The large number of EV and battery manufacturers located in the southern U.S. is gaining attention, leading to continuous momentum in the region. So why the South? According to Glotzer, starting in the 1980s, export restraints led Japanese automakers to start building plants in U.S. southern states. These decisions were influenced by financial incentives offered by state governments looking to create jobs and availability of large pools of lower-cost labor. “Over time, the region saw consistent and ongoing auto sector investments, strengthening regional automotive value chains,” Glotzer says. “Beyond supply chain and labor dynamics, the South offers multiple additional advantages, including favorable land cost and availability, convenient access to the interstate highway system, supportive local governments, robust R&D capabilities, and low energy costs. The region also has a thriving chemicals sector that is highly relevant to battery manufacturing needs. There is also potential to develop key regional mineral resources required by EV supply chains such as lithium and graphite.”
Several factors at play Virginia Klausmeier of Sylvatex
K.C. Boyce of Escalent
There are a lot of factors that go into determining where to locate new EV battery and vehicle manufac-
26 ELECTRICAL APPARATUS | DECEMBER 2023
12ElectAve.indd 2
11/10/2023 9:32:18 AM
turing plants. And although the landscape for EVs and batteries manufacturing is rapidly evolving, many of the facility siting criteria are similar to those of traditional automakers. Glotzer says key considerations include proximity to supply chains to cut transportation costs and speed up production, as well as access to a large pool of skilled labor. “Affordability and availability of land with access to transportation arteries, coupled with regions boasting competitive labor and energy costs, hold significant appeal,” Glotzer says. “Manufacturers are also attracted to locations with supportive local and state governments, where tax incentives and strong governmental relationships can be fostered. And regions with robust R&D hubs, backed by top-tier academic instiEnrique Glotzer of FTI Consulting tutions, offer manufacturers both innovation prospects and strengthened local ties.” Klausmeier points to some additional top factors, including: > Proximity to potential customers, suppliers, and collaborators > State incentives > Workforce/talent availability > Sitting in disadvantaged communities, socially and economically deprived areas, opportunity zones, climate and economic justice zones, old coal communities, etc. > Access to renewable energy > Access to available plants or facilities (brownfield) so as to not have to build from scratch (greenfield) “There is a bonus if old coal or steel plants can be retrofitted,” Klausmeier says. Boyce adds that manufacturers are using the same factors they’ve traditionally used in plant siting. “Things like local labor costs and skill are a big factor, but nearby supply chains – especially for vehicle manufacturing – economic incentives offered by states, and energy costs also factor into manufacturers’ decision-making,” Boyce says. Boyce notes that in the South, there’s proximity to excellent rail and port infrastructure, which helps move finished goods to market more efficiently. Southern states also offer manufacturers a lower cost of labor than other states. “The South has also quietly built itself up as a powerful hub for cleantech more generally, so southern states understand what battery manufacturers, EV manufacturers (and battery recycling companies) need to do business,” Boyce says. “This ‘center of gravity’ encourages more investment because the supply chain and support network are more mature than elsewhere in the country. For instance, VW is manufacturing its all-electric ID.4 SUV in Chattanooga, Tenn., using batteries produced in nearby Commerce, Ga., and battery waste from manufacturing is recycled in Covington, Ga.”
Continued growth & challenges Those in the electrical industry are keeping their finger on the proverbial pulse of the EV manufacturing industry as it continually evolves. As Klausmeier points out, one of the biggest challenges and trends going
12ElectAve.indd 3
on right now in the expansion of EV manufacturing is the building of a domestic supply chain for electrified components. “While there has been a lot of investment in cell and pack manufacturing, there are many segments in the battery value chain, including traditional industries like mining and refining,” Klausmeier says. “There definitely needs to be more minerals refining/ processing, components manufacturing (cathode/ anode/electrolyte), and recycling deployment so that we can create a closed-loop domestic supply chain to compete against China.” Boyce also adds that the Inflation Reduction Act provided incentives for “onshoring” EV manufacturing and its battery supply chain. “That’s been a big part of why we’ve seen such a boom in announced EV and battery plants in the U.S, and that will likely continue as the EV market grows,” Boyce says. “When we survey new car buyers in our EVForward study, we see strong support for domestic manufacturing and find that 28% of all buyers – and 53% of EV ‘intenders’ – are more likely to purchase an EV if they know that it was made in the U.S. As a result, we’re seeing a bit of a ‘virtuous cycle’ where increased domestic manufacturing of EVs increases EV demand, which in turn justifies continued investment in EV manufacturing.” Glotzer also is seeing a transformative shift in the U.S. auto industry that those in the electrical industry need to pay attention to. Global automakers have earmarked an impressive $1.2 trillion towards EV investments through 2030, and that signals a fundamental move away from traditional internal combustion engine (ICE) vehicles. “But this transition doesn’t come without challenges,” Glotzer says. “Current macroeconomics, marked by a high interest rate environment, combined with concerns over charging infrastructure and supply chain disruptions – especially shortages of critical materials – pose major obstacles. EV-focused OEM entrants struggle with reaching production scale and profitability, while traditional OEMs cannibalize their legacy ICE sales, often at negative EV margins.” Looking ahead, both established and new manufacturers will continue to face headwinds. But Glotzer believes there is light in the horizon as consumer attitudes towards EVs evolve, driven by declining up-front costs, increasing driving ranges, improving charger logistics, and lower EV maintenance and fuel costs, especially in an uncertain geopolitical climate with ongoing fuel price risk. “With the massive planned investments across the supply chain, the U.S. EV industry is well-positioned to rebound and eventually accelerate growth,” Glotzer says. Meeting the ambitious U.S. target of 50% EV sales by 2050 could very well be within reach. EA ELECTRICAL APPARATUS | DECEMBER 2023 27
11/10/2023 9:32:19 AM
Plant Happenings Centrus Energy (Piketon, Ohio) opening Centrus Energy announced Oct. 11 that it has begun enrichment operations at its high-assay low-enriched uranium (HALEU) facility in Piketon, Ohio, and expects to begin withdrawing HALEU product later this month. It is said to be the only NRC-licensed HALEU facility in the U.S. and the first new U.S.-owned, U.S.technology uranium enrichment plant to begin production since 1954, according to a statement backed by Deputy Secretary of Energy Andrew Turk and National Association of Manufacturers president and CEO Jay Timmons, among others.
A boardwalk battle Danish energy company Ørsted announced Oct. 31 it is backing out of its Ocean Wind 1 and 2 projects, drawing rancor from New Jersey governor Philip Murphy, raised eyebrows from skeptics of renewable energy, and praise from certain local officials of Cape May County. “Macroeconomic factors have changed dramatically over a short period of time, with high inflation, rising interest rates, and supply chain bottlenecks impacting our long-term capital investments,” said David Hardy, Group EVP and CEO Americas at Ørsted. “As a result, we have no choice but to cease development of Ocean Wind 1 and Ocean Wind 2. We are extremely disappointed to
have to take this decision, particularly because New Jersey is poised to be a U.S. and global hub for offshore wind energy. I want to thank Governor Murphy and N.J. state and local leaders who helped support these projects and continue to lead the region in developing American renewable energy and jobs.”
UAW strike ripples The United Autoworkers Union strike generated significant ripple effects for the American workforce as it entered its third month. The union organized a strike at the Kentucky Truck Plant in Louisville in an effort to compel Ford, in particular, to meet some of its demands. These included wage demands, work-life balance, retirement, job security, and a skilled trades tool allowance, among other provisions. In response, Ford doubled the layoffs at its Sharonville, Ky., plant. Lastly, Stellantis N.V. and Samsung SDI announced Oct. 11 that Kokomo, Ind., will be the site for a second battery manufacturing facility in the U.S. as part of its StarPlus Energy joint venture. The new StarPlus Energy plant is expected to begin production in early 2027 with an annual capacity of 34 GWh. The joint venture company will reportedly invest over $3.2 billion and create 1,400 new jobs in Kokomo and the surrounding area. The total investment for both facilities will be over $6.3 billion and create 2,800 total new jobs. This would make it the second StarPlus Energy gigafactory in Kokomo. Construction is already underway on the first, which is “on track to open by the first quarter of 2025 with an annual production capacity of 33 GWh, according to an Oct. 11 Stellantis statement.
Austin plant highlights energy woes
This #@&% Impulse Tester is not putting out the voltage. Call PJ and order a Real Surge Tester ! PJ Electronics (since 1969) has been manufacturing an exclusive High Frequency Surge Tester that is the best for testing the integrity of insulation in all electric motors, generators and all types of windings. We offer Bench, Portable & Console models. All 65 Models (6KV to 60KV output) are capable of testing fully assembled motors without rotating the rotor. Visit www.pjelectronics.com to learn why we are the only choice for all of your Surge Testing needs! _
575 Davidson Road Pittsburgh, Pennsylvania 15239 Toll Free Phone: 1-877-4PJ TEST
Despite being in a fast-growing city in Texas that serves as a proverbial “renewable energy haven,” one coal plant in Austin reportedly missed its 2022 shutdown goal. The plant generates as much as $11 million a day and operates as both a power generator and utility for the rapidly growing Texas capital. This perceived shortcoming frustrated environmentalists, leading to an August demonstration with about 50 people outside Austin Energy’s headquarters, followed by a public meeting. The energy provider responded by pledging an overhaul, stating that it is “now in the process of updating its resource, generation, and climate plan.”
A vast array Array Technologies has finalized plans for a major expansion that will solidify the company’s New Mexico future with a new $50 million manufacturing campus in Bernalillo County. Array manufactures utility-scale solar trackers that maximize the efficiency of solar panels by moving them to optimize the sun’s angle. In 2020, the company went public under the symbol ARRY. “Our foundation was laid in Albuquerque over 30 years ago, and this expansion is a testament to our longstanding relationship with this vibrant community,” said Array Technologies CEO Kevin Hostetler. — Charlie Barks EA
28 ELECTRICAL APPARATUS | DECEMBER 2023
12PlantHappenings.indd 1
11/10/2023 9:32:55 AM
Feature | Product Development
From concept to customer
— Illustration by PureSolution / Shutterstock
Following the progress of the typical new product from conception to delivery to the user By Bill O’Leary, EA Contributing Writer Global pandemic, supply chain delays, inflation, raw materials scarcity, rapidly developing technology, changing customer tastes — the product development process has never been more fraught and challenging as it is today. Getting that product on the physical or digital shelf can feel like a miracle in and of itself, with the journey more akin to that of Odysseus than anyone in an office. Changes in research and development testing, internal market research, product testing, advertising, and distribution channels have also made a successful launch anything but a sure thing. The numbers support these challenges: 66% of product development projects end in failure or experience significant delays, and the average success rate for a new product introduction is 50%, according to Zipdo, a business software developer. And this tumultuous battlefield is riddled with many more soldiers than in years past. According to the Harvard School of Business, nearly 30,000 new products are launched into the market each year to jockey for customer attention and almost 95% subsequently fail. But it’s not all doom and gloom. The protracted strength of the economy has highlighted elevated
12ProductToMarket.indd 1
consumer spending, an active labor market, and strong earnings across many sectors. And according to a recent study from Nielsen, 63% of consumer testimonials stated that they like being introduced to a new product.
Supply chain challenges A Longmont, Colo., manufacturer of motor testers and winding analyzers was able to weather the storm with its most recent product, albeit with a few bumps and bruises along the way. “The global supply chain was very challenging and led to the longest delays in the development,” said Jacob Beck, CEO of Electrom Instruments. The company recently launched its iTIG IV, or iTIG Model D as it’s also referred to, this year. This surge tester and analyzer is the fourth iteration of the iTIG series and is designed for motor and rotating equipment repair. The iTIG IV was unveiled at the June 2022 convention of the Electrical Apparatus Service Association, two years after the start of development. Yet, because of significant supply chain delays, the full launch of the iTIG IV product line happened a year later at the EASA 2023 show. “The significant delay was a disappointment,” Beck said. “But given all the obstacles encountered, our team did a very good job getting it done.” Please turn to next page
ELECTRICAL APPARATUS | DECEMBER 2023 29
11/10/2023 9:33:55 AM
Here, an iTIG winding analyzer is put to use on an electric motor. This instrument can perform a number of tests, such as high frequency surge and partial discharge. — Electrom Instruments photo CONCEPT TO CUSTOMER continued from previous page
The upstream tasks of product development, such as prototyping and product testing, have their own wealth of challenges that can stymie many a new product, but in the past few years, it’s been those last miles before the finish line that have proven the most difficult. Global lockdowns from the pandemic significantly slowed and even fully stopped the flow of raw materials and finished goods.
Backlogs of goods In 2021, a U.S. Census Small Business Pulse survey, held from May 31 to June 6, said that 36% of small businesses reported delays with domestic suppliers, concentrated in manufacturing, construction, and trade sectors. Backlogs of goods from this height of the pandemic created a ripple effect that impacts product distribution today. However, Beck and the team were aware of the product launch challenges as Covid-19 began to spread from localized danger zones to a global health crisis. Electrom launched its previous series of motor testers, the iTIG III, in February 2020, a few days before the virus began to run roughshod, closing businesses and triggering lockdown orders - a once-in-a-generation event that is impossible to plan for. “Horrible timing, but who knew what was coming?” said Beck. “Despite that we started working on the next series of motor testers, the iTIG IV, a few months later during the summer.” Not ceding defeat in the face of this unfamiliar foe, Beck decided to do the opposite by seizing on the moment and finding opportunity. That window of time, which brought delays across many facets of work, along with the fact that they had just released the iTIG III, provided Electrom with the opportunity to rethink the tester from top to bottom. This included fresh perspectives for hardware, software, materials, and packaging.
Miniaturization and cost reduction A product born and released during the pandemic, the primary objectives for this next iteration was to miniaturize the testers and reduce cost. In addition to traditional iTIG features such as surge and d-c hipot
testing and insulation and winding resistance, this model has new features such as fully automatic testing, product line automation, and advanced multicoil testing. And all of that is loaded into a smaller package. Customer feedback has always extensively driven the iTIG development and improvement process over time. For iTIG IV, at the top of the wish list was a smaller and lighter tester. A lithe device allows users the luxury of easier transport out in the field and maneuverability around intricate pieces of machinery in tight spaces. “On the previous series of testers, we had focused on precision and performance,” Beck said. “However, for the iTIG IV, dramatic reduction in size, weight, and cost were our objectives. The focus on miniaturization required new designs from the ground up, and with new software. We have done this before, but not with the advanced electronics and software required this time.” For comparison, the iTIG IV 4 kV was 63% smaller by cubic feet and 47% lighter by average weight in pounds than the iTIG III 4 kV testers. The miniaturization also required development of more custom parts and assemblies instead of purchasing parts already available in the market, which added time and cost to the process. “Miniaturization is always a challenge,” Beck said. “It is especially tricky for this type of analyzer because there are 3 V electronic circuits next to highvoltage circuits of up to 15,000 V. Requirements include no high voltage influence on the operation of the tester and no internal partial discharge. The latter is critical when the analyzer has to measure partial discharge in the windings under test.”
30 ELECTRICAL APPARATUS | DECEMBER 2023
12ProductToMarket.indd 2
11/10/2023 9:33:56 AM
Much of the physical contraction was possible by swapping hardware for software. More advanced integrated circuit chips and software can now perform the same functions that were delivered by weightier and more sizable hardware circuitry.
The effect of Moore’s Law Not a surprising request from customers as downsizing of technology has been a continuing trend across industries for years and a key consideration for any product development process. It follows Moore’s Law, which states computer advances will grow substantially faster, more efficient, and smaller over time. The titular Gordon Moore, co-founder of Intel and Fairchild Semiconductor, posited the law in 1965, positing that parallel with device shrinkage would be a doubling of the number of components per integrated circuit every year. He revised the prediction in 1975 to doubling every two years, a growth rate that has held ever since. This evolution has been sustained across digitized electronics with the increase in memory capacity like RAM, the improvement in sensors, and the reduction in microprocessor costs leading the charge. Today, many large technology manufacturers use Moore’s prediction as a guide for longer-term product planning and as key goals for their research and development divisions. Beck attributes R&D to much of the company’s recent success, an area that wasn’t often prioritized in the past. “Electrom went through a period 15-20 years ago when little R&D was done, to the detriment of the company,” he said. “Continuous development and improvement efforts are required.” Beck added that a focus on R&D should be essential for all original equipment design and manufacturing companies. An area that historically receives cuts in tight economic conditions, today R&D has been increasing in popularity and is more commonly seen as a pillar for any healthy and innovative business.
tures along with enhanced quality that addresses specific and changing customer pain points. It can open new market opportunities, expand a company’s reach and share, help protect intellectual property through copyrights and patents, and lead to the discovery of cost savings in materials and processes. It also sets the stage for a robust testing process that can improve the product performance. For the iTIG IV, subassembly prototypes were developed and tested, then full assemblies in smaller footprints. Prototyping allows companies to better visualize the product as a concept along with its capabilities. It brings an idea into tangible reality, providing an added perspective for development and troubleshooting. Design flaws and technical issues can be more easily identified, which can cut down on costs that would have resulted from a flawed final product. It also often accelerates the overall development process by reducing rework and allows for early testing. That testing can then lead to more iteration and improvement of the product by pinpointing any flaws before the product reaches a large audience. Drop tests and vibration tests were performed on the iTIG IV to ensure robustness. Electromagnetic interference and similar tests were conducted to gauge the electrical health of the whole system. Throughout the process, software development and improvements were ongoing. Please turn to next page
Increased investment in R&D According to the National Center for Science and Engineering Statistics within the National Science Foundation, research and experimental development performed in the U.S. totaled $717 billion in 2020. The estimated total for 2021 is $791.9 billion - a more dramatic year-to-year increase than in the past when it took six full years from 2010 to 2015 to cover nearly the same monetary ground - $406.6 billion in 2010 to $494.5 billion in 2015. The heightened attention makes sense when you look at the benefits. In addition to fostering an innovative and continuous improvement environment, companies that invest in R&D can gain a competitive advantage by providing new products and fea
12ProductToMarket.indd 3
A field service technician gears up for work in front of a wind turbine.
— Electrom photo
ELECTRICAL APPARATUS | DECEMBER 2023 31
11/10/2023 9:34:01 AM
Once a new product has surmounted the numerous hurdles it must cross from conception to design, from manufacturing to testing, it’s ready for Prime Time — and, one hopes, a receptive audience. Here, the staff of SpringPoint Solutions of Portland, Me., stands ready to welcome visitors to the company’s trade show booth. At last June’s EASA Convention, the company showcased a new app for IOS and Android that gives technicians the ability to access their jobs, view and take pictures, review technical documents, and perform other tasks useful in electromechanical service. — SpringPoint Solutions photo
CONCEPT TO CUSTOMER continued from previous page
Simulation software was used extensively to allow for more aggressive development timelines. The team also attempted to replicate the customer environment as much as possible in these tests. Electrom engineers and technicians used the analyzers with small and large motors and coils, as well as under high and freezing temperatures. Testing was also implemented at high and low humidity and at high elevation — not difficult to do in Colorado. The goal was to explore the analyzer’s limits and measure just how durable and sustainable it could be. Varying power voltages were supplied to document strength and capacity. Tests and measurements were also done under vibrating conditions and during field testing to account for as many real-world applications as possible. Independent lab tests were also conducted to provide additional external data to the internal data gathering - a vital “second opinion” to build trust in the product. The ultimate goal of these tests was to evaluate functionality, ensuring all the design specifications were met, including stability, repeatability, and accuracy of all the analyzer’s measurements. Safety was also a priority. Testing is often used as a way to confirm that the product aligns with all of the relevant industry standards and regulations. For electronic test instruments like the iTIG IV and its ilk, the considerations are many, such as EMI, EMC, and FCC regulations, EU directives, and CSA and US safety standards. And while industry standards are not necessarily legally bound regulations, they are often customer requirements, so meeting those stipulations is essential for product developers.
Glitches along the way So what did Beck and the team learn from these various tests that impacted the product before launch? Well, for one, some of the new parts were, shall we say, “not good.” “Not all vendors and manufacturers sell or make high quality products, and quality can vary over time as we probably all know,” Beck said. “But in one example a high-quality part we had used successfully in the past suddenly had problems well into the development process. We found out that the supplier of the part had moved manufacturing from a factory in one country to a factory in another country. Something
had changed between two deliveries of the part, and it was not good. It was back to the drawing board.” Back to the drawing board and back to the field for testing and there and back again as the product development ping-pong game often requires, but when June of this year came around, the iTIG IV was ready to launch. Electrom took an “if it ain’t broke don’t fix it” approach to its distribution and marketing strategy, continuing to utilize its own sales force in North America and independent distributors in countries around the world. The target audience was the same as for the iTIG III but with one key addition. The traditional segments were motor service and repair companies, industrial users of motors, and manufacturers of rotating equipment, generators, and coils. However, resources were added to increase efforts in the wind power sector, specifically the wind power industry operators and service companies who take testers all the way up in wind turbine towers and thus value smaller form factors and less weight.
Has the unusual become the norm? Certainly an atypical product development journey, perhaps worthy of Greek mythology with its many unique and pressing challenges, ones that so many manufacturers are encountering today. So maybe the atypical has actually become the typical? Maybe the varied whirlwind of global and local concerns across all business functions is the norm? One could say that the environment in which a product is developed is as important and impactful as the final product itself. And who knows what changes and challenges are on the horizon? But as history has proven, those with the ingenuity and drive to serve their customers will find ways to meet and exceed those challenges. EA
32 ELECTRICAL APPARATUS | DECEMBER 2023
12ProductToMarket.indd 4
11/10/2023 9:34:05 AM
Feature | Technical Standards
Why get involved with standards? Opportunities for career advancement abound for people willing to volunteer and help out By John Malinowski, EA Contributing Writer Standards constitute the language engineers use to document the best practices. Getting involved in standards is a very rewarding experience. You not only get an opportunity to learn from the subject matter experts, you can also get the satisfaction of mentoring young professionals — or being mentored. The National Electrical Manufacturers Association, or NEMA, publishes standards on members’ products such as motors, drives, transformers, magnet wire, and such. Each product section within NEMA is responsible for the writing and maintenance of the standards for its products. Only NEMA members can be on the working group that write the standards, but since most are ANSI/NEMA standards, review and commenting on changes is open to the public. If you are an employee of a motor manufacturer, you are eligible to work on the MG 1 technical committee if nominated by your company. This group is always looking for new members and wider participation from all company members. NEMA has a voice, and members participate in the various IEC standards as well as on the National Electrical Code, or NEC, which is updated and published every three years by the National Fire Protection Association, or NFPA.
Federal efficiency standards Since the 1990s, NEMA and IEC electric motors have had their efficiency levels regulated by the U.S. Dept. of Energy (DOE). First, the department regulated general-purpose medium motors 1–200 hp to what NEMA called Energy Efficient levels (NEMA MG 1, Table 12-11). Energy advocates were pushing for a higher level, which became NEMA Premium in August of 2001. DOE was then pushing to raise efficiency above this premium level, but NEMA formed a coalition to promote expanding coverage to 1–500 horsepower, including custom motors. This step became the largest energy-saving regulation to date done by DOE. General-purpose small motors (NEMA two-digit frames) in single- and three-phase with open dripproof enclosures were added later. DOE is currently revising medium motor regulations, adding air-over designs. Inverter-only and
The IEEE Energy Storage and Stationary Battery Committee held its first Electrical Energy Storage Applications & Technology conference at the AT&T Conference Center in the University of Texas Austin campus complex Nov. 7-9, 2022. The event was attended by more than 130 engineers, R&D scientists, and industry specialists. Committee meetings such as this one are occasions to network with one’s peers, have a say in the formulation of standards that affect one’s industry, and maybe find a mentor. — IEEE photo
synchronous motors are also under study, as is a new class of small electric motors not covered by the present rules.
DOE, EASA, and IEEE With the DOE developing so many regulations on various appliances (including electric motors), how can individuals become involved? This process is explained by the DOE in a Notice of Proposed Rulemaking published in the Federal Register. Generally, the DOE conducts a webinar outlining its intent, and anyone may sign up for this. The public or a company may make comments on this rulemaking. The Electrical Apparatus Service Association, or EASA, also has standards for electric motor repair (ANSI/EASA AR100 Recommended Practice for the Repair of Rotating Electrical Apparatus), and members can be involved with the revision to this standard. Many EASA members also participate in similar repair standards issued by the Institute of Electrical and Electronic Engineers, or IEEE, for motor repair and maintenance. IEEE is the world’s largest technical professional organization, with more than 427,000 members in 190 countries. Within IEEE, there are many different societies tied to specific technologies such as antennas and propagation, broadcast, circuits and systems, engineering in Please turn to next page
ELECTRICAL APPARATUS | DECEMBER 2023 33
12standards.indd 1
11/10/2023 9:35:44 AM
STANDARDS continued from previous page
medicine, industrial electronics, industry applications, and many more. Within each society, there are various committees. There are various levels of membership within IEEE where you can join as a member or as a student member (at a lower dues level). Members come from academia and research as well as from industry. Many folks in industry join IEEE’s Process Industries Technical Dept., which includes the following committees: > Cement Industry > Electrical Safety > Metals Industry > Mining Industry > Petroleum and Chemical Industry > Pulp and Paper Industry Each of these technical committees holds an annual conference where technical papers are presented and sponsored standards are developed and revised. There are opportunities to present peer-reviewed papers that later may be published in the group’s Industry Applications magazine or other IEEE technical journals. Members of these technical committees can review the papers during development before presentation. Tutorials are often presented at the annual conferences. The IEEE Pulp and Paper Industry Conference, or PPIC, is usually a small group of fewer than 150 attendees that allows a lot of interaction. The conference has a welcome reception on Sunday evening that is a great opportunity to network and connect with old friends. Monday through Wednesday offer paper presentations, while Thursday is tutorial day. A new attendee can find a mentor who will take the newcomer under his wing and encourage the newcomer to write a paper. There are many very knowledgeable engineers from large paper companies who are IEEE Fellows, a distinction reserved for select IEEE
Real-world consequences of standards development
Standards for electrical equipment aren’t just for nerds who get excited about legalistic documents full of abstruse language impenetrable to the uninitiated. Published guidelines can have an effect not only on how machine designers do their jobs but also on how maintenance and service personnel do theirs. Being involved in the standards-making process can therefore have long-term consequences that affect how we all do our jobs. Consider the recent case of NFPA 70B, the National Fire Protection Association’s Recommended Practice for Electrical Equipment Maintenance to the Standard for Electrical Equipment Maintenance, which went from being a “recommended practice” to being a standard when it was approved as an American National Standard by the American National Standards Institute last January. As explained by Corey Hannahs last March in NFPA Today, NFPA 70B, which has evolved from a recommended practice to a standard over the course of 50 years, emphasizes the importance of regular maintenance for electrical equipment to prevent unexpected shutdowns. “Just as vehicles require regular upkeep to remain reliable as usage and aging persist, maintenance
members whose extraordinary accomplishments in any of the IEEE fields of interest are deemed fitting of this prestigious grade. Each year, only one-tenth of one percent of IEEE members can be elevated to the IEEE Fellow grade. If you have been involved in industry for more than five years, you are eligible to become an IEEE Senior Member. Once you join PPIC, you can join one of the technical subcommittees, such as Drives and Control Systems. You can run through the leadership of that group with two years as secretary, vice-chairman, and chairman. There are many opportunities to volunteer and develop lifelong relationships at these conferences. PPIC has just started the first standard that originates in the group (IEEE Std. P3371, Recommended Practice for Coordinated Drive Systems for Electrical A-C Motors Operating on Three Phase, 50 Hz or 60 Hz, 1000 V and Below for Pulp and Paper Industry Installations). The IEEE Petroleum and Chemical Industry Conference, or PCIC, has a much larger group of 1700 attendees. PCIC also has many IEEE standards as well as maintenance of several from the American Petroleum Institute (API). Work on these standards is conducted for several days before the PCIC conference begins. These standards working groups are an opportunity where additional people are needed. Standards are always better when working group members are those who use the product rather than mainly manufacturers. To vote for IEEE standards, one must be a member of IEEE and have membership in their Stan-
is also vital for electrical systems to stay dependable when they are needed,” Hannahs wrote. The primary concern highlighted in NFPA 70B is safety — the safety both of electrical systems and of the people who work on them. The standard’s purpose is to protect people, property, and processes against the risks associated with equipment failures, breakdowns, and malfunctions. An important term used in NFPA 70B is condition of maintenance, a principle that’s crucial for ensuring safety in electrical work, Hannahs explains. This condition is also mentioned in related codes and standards, such as NFPA 70E, underscoring its importance in establishing and maintaining safety protocols. In practice, it’s important to combine NFPA 70B and NFPA 70E — along with the National Electrical Code itself — to achieve a comprehensive electrical safety cycle, according to Hannahs. (NFPA 70B focuses on maintenance, while NFPA 70E concentrates on work practices and the NEC on code-compliant installations.) Perhaps most notably, “NFPA 70B is the standard that can now be both utilized and enforced, to ensure that the proper conditions of maintenance have been established,” writes Hannahs [emphasis his]. Whether or not an NFPA standard becomes enforceable under law is a matter for authorities having jurisdiction, or AHJs, to decide. That process can take time. But the transformation from a recommended practice to a standard is the first step towards establishing what you must do instead of what, in someone’s opinion, you merely ought to do. Considering the potential long-term consequences of standards, especially when they attain the status of law, it makes sense to try to have a hand in their formulation from the outset. — Kevin Jones
34 ELECTRICAL APPARATUS | DECEMBER 2023
12standards.indd 2
11/10/2023 9:35:46 AM
In November 2022, the Technical Education Committee of the Electrical Apparatus Service Association convened to come up with a plan to provide training guidelines and resources for association members over the following year. Present were (front row, from the left) Tom Bishop, Craig Whitworth, Blake Parker, Matt Newport, Charles Yung, Gene Vogel, Barry Bullard, and Austin Bonnett, and (back row) Electrical Apparatus Contributing Writer Chase Fell, Linda Gladden, Bjørn Eirik Mjåtveit, J.D. McGlone, Jacob Voorhies, Steven Carbone, and Carlos Ramírez Gutiérrez. — EASA photo
dards Association (not required if you don’t want to vote).
Opportunities for presentations
With so many papers being presented, PCIC offers a great opportunity for presentations. Such a large organization also requires many volunFurther involvement with PCIC teers to serve on the various subcommittees, just like PPIC. With PCIC being such a large group made up of As an IEEE Industry Application Society (IAS) member, you can be people from the petrochemical industry, consul- elected to a term on the IEEE IAS Board of directors as a member-attants, and suppliers, there is a huge opportunity to large or other positions. This group manages and directs activities of gain knowledge that can move your career forward. the conferences and activities within the Industry Applications Society. You can find a mentor, such as a Students may join IEEE at a resenior engineer at a major chemiduced membership rate. These cal company. A mentor will enyounger folks can benefit from courage you to write papers for networking, mentoring, and capresentation in the Chemical subreer development. committee where the mentor was One can also develop relationchairman. Also at PCIC, you will ships leading to future employlearn how to become involved ment. The years of membership with the various standards workas a student will help later when ing groups. they look at life membership staWith PCIC being such a large tus (age + membership years = conference with the presentation 100) later career. of so many papers, there are sevOpportunities exist to particieral concurrent tracks of papers pate in standards and regulations being presented at once over two development on many different and a half days. PCIC hosts a relevels. All organizations are lookception for attendees to network ing for new participants, particuon Monday evening, with venlarly those who are users. dors hosting receptions evenings As with voting, one shouldn’t throughout the week. On Tuescomplain about a standard if one day afternoon, each technical doesn’t participate in its developsubcommittee holds a meeting ment. Not only does participation to discuss and select the followwith standards help expand your ing year’s papers for the program. The National Electrical Code is updated and published ev- knowledge, the relationships and Thursday is reserved for tutorials ery three years by the National Fire Protection Association. networking can lead to advances and PCIC business meetings for Members of the National Electrical Manufacturers Associa- and career opportunities. EA tion, among others, have a say in the formation of this widely the officers. used and highly influential standard. — NFPA photo
12standards.indd 3
ELECTRICAL APPARATUS | DECEMBER 2023 35
11/10/2023 9:35:49 AM
Feature | More Than Accounting
China’s standing post-pandemic The nation is staggering to its feet economically, hobbled by a zero-Covid policy and broken supply chains By William H. Wiersema, CPA, EA Contributing Editor China’s economic slowdown has raised concerns and uncertainties among managers and decision-makers worldwide. China is still trying to catch up from the pandemic. Things are slowly coming back, but not up to where they have been. As managers in the U.S. continue to struggle with uncertain supply chains, they seek to understand China’s decline and what the future holds. Its economy is no longer expected to surpass the U.S. in the foreseeable future. China’s Zero-Covid lockdown policy and its declining exports are important factors. While the entire world has suffered from Covid, technology offers hope.
Zero-Covid policy China was locked down to varying degrees from the pandemic’s beginning through December 2022. The reopening of countries during the Covid pandemic varied widely around the world, with different countries implementing different strategies and timelines based on their specific circumstances, healthcare infrastructure, and government policies. China was among the last to reopen after the rest of the world had already moved forward. China’s Zero-Covid policy is characterized by “Find, Test, Trace, Isolate, and Support” (FTTIS). Under an elimination strategy, the movement of the population is heavily restricted. Factories and other facilities sometimes operate in a closed loop, with staff living and working on premises. The government tracked people using apps to enforce quarantines. Goods transport was impaired by the need to pass multiple testing sites. The policy was difficult to administer and ultimately generated protests. As Keith Bradsher reported in the New York Times last January, “The government’s strict ‘zero Covid’ restrictions cast a pall over 2022, strangling the economy with frequent quarantines, regional lockdowns, and massive spending to pay for widespread testing. Then on Dec. 7, China lifted the policy without warning after nearly three years. Within weeks, the virus had infected hundreds of millions of people, killed many older residents, and left factories, offices, and restaurants bereft of workers and customers.” While official case counts reported to the World Health Organization have been relatively low, anecdotal evidence indicates the disease remains a
— macrovector / www.slon.pics / Freepik illustration
problem. Attorney Fang Jue posted on August 2023 social media that upon his first post-pandemic trip to Shanghai, “I got Covid as soon as I arrived. . . . Many people visiting from U.S. and Europe are having the same experience.” The Zero-Covid policy and lockdown reduced trade. For months, goods and the transportation to move them were in shortage. As supply chains broke, ordering goods took longer. Without inventory, export demand went unfilled. Meanwhile, prices to consumers rose, even to record levels. In the U.S., drastic increases in interest rates followed. Prolonged lockdowns compelled importers to diversify their sources, seeking alternatives to Chinese goods. Often, they had no other option but to diversify their supply chains and reduce their reliance on China. Others were already moving in that direction because of U.S. tariffs on Chinese goods and rising wages for Chinese factory workers. Stanley Black & Decker’s supply chain transformation, which includes moving production from China to Mexico, is emblematic of this shift. Going a step further, some companies have brought manufacturing back to the U.S. The Reshoring Initiative’s projection of 406,000 manufacturing jobs returning to the U.S. in 2023 reflects this trend as continuing.
Slowed economy The Covid-19 pandemic has put China’s economy and trade position in an entirely different place than before. Using official statistics, the International Monetary Fund (IMF) reports China’s real gross domestic product (GDP) in April 2023 at $19.4 trillion, while the U.S. reached $26.9 tril-
36 ELECTRICAL APPARATUS | DECEMBER 2023
12acc.indd 2
11/10/2023 9:36:54 AM
lion. Growth rates for 2022 were a lower-than-expected 3.0% for China, while the U.S. had 2.1%. If these rates were to continue, it would take 38 years, until 2060, for China’s economy to exceed that of the U.S. China’s current growth contrasts with recent history. From 1978 to 2009, growth averaged nearly 10% yearly, with approximately 7% the following decade. Economists referenced the achievements using terms such as “Great Transformation,” “World’s Factory,” and “China’s Century.” Many predicted China’s economy would have exceeded the U.S.’s by now. The IMF indicates China’s projected growth rates will recover to 5.2% and 4.5% in 2023 and 2024, respectively. However, the IMF has the following caveat: “Recent developments shift to the downside the distribution of risks surrounding China’s growth forecast, with negative potential implications for trading partners in the region and beyond. The principal risks include a deeper-than-expected contraction in the real estate sector in the absence of swift action to restructure property developers, weaker-than-expected consumption in the context of subdued confidence, and unintended fiscal tightening in response to lower tax revenues for local governments.” The World Bank’s October 2023 East Asia and Pacific Economic Update indicates: “. . . loss of confidence, attributable in part to falling property prices, increased indebtedness, and the implications of aging, has led to a further increase in the already-high savings rate to 33 percent. Private fixed-asset investment growth has hovered around zero percent since 2021, weighed down by high debt, declining operating profits, and persistent uncertainty. The Producer Price Index has declined by an average of 0.4 percent per month in January-July 2023, with deflation threatening to increase the real burden of debt and erode corporate profits.” Katharina Hauck and Roshni Mehta in Think Global Health address the potential economic impact of the Zero-Covid policy: “Modeling suggests that a strict lockdown in Shanghai alone could reduce China’s real gross domestic product — a measure of value added in a country through the production of goods and services — by 4% for the duration of the shutdowns. And if China’s four largest cities all undergo strict lockdowns at the same time, national inflation-adjusted GDP would fall 12%.” They also note the departure of foreign businesses. According to the World Bank, exports comprise 20% of China’s GDP. The extensive industrial infrastructure, maritime transport, and intricate supply chains that feed this export-oriented system have contributed to China’s economic prowess on the global stage. The U.S. Dept. of Commerce reported a 25% decline in U.S. imports from China for the first half of 2023. As of September 2023, Mexico has surpassed China as the top country for U.S. imports for the first time in twenty years. According to Oxford Economics, a global forecasting and quantitative analysis firm, foreign greenfield investment in China has fallen by 80% since 2010. Meanwhile, China’s debt-to-GDP ratio has become so high as to raise concerns.
Look ahead China’s challenges extend even further. According to the World Bank, “China’s high growth based on investment, low-cost manufacturing, and exports has largely reached its limits and has led to economic, social, and environmental imbalances. Reducing these imbalances requires shifts in the structure of the economy from manufacturing to high-value services, from investment to consumption, and from high to low carbon intensity.”
The International Monetary Fund reports China’s real gross domestic product in April 2023 at $19.4 trillion, while the U.S. reached $26.9 trillion Peter Zeihan writes in his book The End of the World is Just the Beginning that trends will be toward custom production, such as 3D printing near the point of consumption, and away from mass production and extended supply chains. 3D printing can already generate certain service parts for motor repair. It’s even being applied to build housing. The pandemic adversely affected most of the world. Government stimulus programs enacted during the pandemic need to be funded. For example, following the 2009 recession, economies grew in 2010 but then stagnated for several years. A low 1% rate is predicted for major developed countries. Futuristically speaking, technology could spur the economy back into growth rather than through the doldrums expected over the next few years. By staying informed and proactive, managers can position their organizations to weather the storm and emerge stronger in an era of economic uncertainty. For example, artificial intelligence had a breakthrough this year with ChatGPT by OpenAI. This revolutionary technology can ultimately elevate society by enhancing communication, knowledge dissemination, and problem-solving. At a practical level, it leverages the vast knowledge it has been trained on to offer valuable insights and recommendations, making it a highly capable and versatile tool. For everything from researching a scientific problem to writing poetry, ChatGPT can already make incredible contributions, with data analytics and more much expected soon. AI’s disruptive impact on the world economy is undeniable. Effectively adapting to evolving technologies and managing the resulting transformations will necessitate proactive involvement from governments, corporations, and individuals. In the future, nations must focus on education, skill enhancement, and promoting adaptability within societies. By doing so, we can harness the potential of AI, including ChatGPT, to propel humanity to a whole new level. EA EA Contributing Editor William Wiersema has traveled extensively through China on several occasions for business and pleasure and has closely followed the country’s economic, financial, and cultural affairs for a number of years. — Editor ELECTRICAL APPARATUS | DECEMBER 2023 37
12acc.indd 3
11/10/2023 9:36:56 AM
Product Showcase
The newest and best in tools and equipment for plant and shop
Caverna Soft Touch elastomer filament Infinite Materials Solutions LLC has launched Caverna Soft Touch, a professional-grade elastomeric material. It prints lightweight parts that become soft, spongy, springy, and pliable, making them suitable for printing medical devices, automotive parts, sporting goods, and other cushioning components. The material features a new approach to creating soft-touch parts through a post-print water soak, giving manufacturers the freedom to create design variations without the need to retool machinery or cut new molds.
Seepex pump for battery applications The new Seepex BF pump is tailored to the requirements of battery production. A maintenance-friendly design can reduce downtime and total cost of ownership, according to the manufacturer. Clamp connections for quick installation and removal — as well as a removable rotating unit — simplify replacement
Apptronik unveils humanoid robot Apollo Apollo, from Apptronik, is said by the company to be “the first truly mass-manufacturable humanoid design.” It has been optimized for supply chain resiliency by the removal of singlesourced core components. Palletization, case picking, machine tending, work-cell delivery, and trailer unloading Apollo is versatile. The robot has a four-hour runtime battery pack and intuitive software for operation and communication. Apollo has safety sensors and controls, and it’s modular in positioning so it can be stationary, on a mobility platform, or fully mobile with legs.
and maintenance. With proper maintenance, the pump will have a long life, according to the manufacturer. The Seepex BF pump can be installed quickly, has a flow rate of up to 30 m³/h, and operates at a pressure of up to 12 bar. It’s available in block or bare shaft design and can meet customer-specific drive requirements. A TA-Luft or ATEX certified version is also available.
38 ELECTRICAL APPARATUS | DECEMBER 2023
12ProductShowcase.indd 2
11/10/2023 9:37:44 AM
Seventeen new power tools from Bosch Bosch Power Tools has announced the launch of 17 new power tools, adding new innovations to the brand’s growing CORE18V platform. The brand’s latest offerings include new options within the oscillating multi-tool and grinder tool categories, such as the 18 V EC brushless StarlockPlus. The new tool is versatile by utilizing the many Starlock and StarlockPlus accessories to handle flush-cutting, plunge-cutting, sanding, grinding, and other tasks for a wide array of materials. The EC brushless 18 V motor offers increased power, runtime, torque, and performance for highly skilled workers.
Sodium-ion cell battery for use off grid AMTE Power recently released a prototype of Ultra Safe, a sodium-ion cell battery for remote off-grid locations and residential use. This new technology is easy to transport and can operate in a broad range of temperatures, making it safer and more stable than alternatives, according to the manufacturer. Less-expensive raw materials used in the battery makes Ultra Safe cost-effective as well as high-performance.
ELECTRICAL APPARATUS | DECEMBER 2023 39
12ProductShowcase.indd 3
11/10/2023 9:37:47 AM
Pyramex gloves for arc flash protection
Littelfuse launches new line of switches
Pyramex has released the GL3009CKB goatskin leather driver glove to provide protection against arc flash. The gunn-cutstyle glove features goatskin leather for a comfortable fit while providing dexterity and a 360° A4 Para-Aramid cut liner for enhanced cut protection; it also offers Level 2 impact protection. In addition to carrying an NFPA 70E arc flash (Category 4) rating, the glove also holds safety ratings: ANSI/ISEA 105 – CUT A4 with Abrasion 3 and Puncture 3; ANSI/ISEA 138- Impact 2 and EN388. They also incorporate an FR-treated TPR, Kevlar stitching, a keystone thumb, and a high-visibility design that enhances visibility in low light.
Littelfuse, Inc., has launched a new line of switches: the Class J fuse disconnect switch. The compact device combines a switch and multiple fuses into a single product, potentially offering a simpler way to open and close a circuit manually while safeguarding against overcurrent and short circuits. When the switch detects an overload or short circuit, the fuse blows automatically to open or break the circuit both upstream and downstream and shuts off the equipment. The 600 V switch is available in 30, 60, 100, and 200 A and can protect many applications in various industries, including HVAC/R, mining, solar, and energy storage.
SSE 2024 HANNOVER ME
A G N I Z I G R E EN E L B A N I A T S U S I N DUSTRY
24 lutions at #HM Produc ts and so , Germany 24 Hannover 22 – 26 April 20 .com hannovermesse
WORLD. LEADING. INDUSTRYSHOW.
40 ELECTRICAL APPARATUS | DECEMBER 2023
12ProductShowcase.indd 4
11/10/2023 9:37:51 AM
Onair Laser series compressor package The Onair Laser series compression units are designed for intensive use and are known for their high efficiency. Compact and quiet, they’ve been designed for laser-cutting industrial environments, which require air flow rates at high operating pressures. Use of the Laser series Onair systems allows cutting by air, thus avoiding the use of nitrogen and considerably saving money, according to the manufacturer. The latest-generation screw compression units are capable of reaching pressures of up to 20 bar. The company says this allows laser compressors to be versatile and suited to all compressed air requirements at different operating pressures.
Lift kit for Fanuc cobots Robots are often used for palletizing, material handling, inspection, and construction, but they reach their limits once the robot arm is fully extended at a certain height. Fanuc’s latest Liftkit increases the reach of a robot by moving it along a vertical axis. The base of the robot can be raised or lowered during operation so that it’s always in an optimum working position. The Lifkit-FA includes a lifting column, a control unit, and a Fanuc software plug-in so that movement can be programmed and controlled via a standard TCP/IP protocol. The system includes redundant, safety-certified relays for safe stopping during operation when connected to the robot’s safety outputs. The mounting plate is included, and the column is equipped with additional threaded holes to connect external cable transport systems.
Ceramic resin for SLA 3D printing
Portescap’s motor for tattoo machines
Alumina 4N resin from Formlabs is said by the company to be the first high-performance ceramic with a 99.9% purity alumina material for stereolithography, or SLA, 3D printing. This has created a cost-effective production avenue for parts manufacturing for the high-temperature insulating material. Alumina 4N resin is intended for parts such as connector housing and covers, spark plug insulators, electrical mounting, terminal blocks, isolators, insulating housing, and tubes.
Portescap, a division of Regal Rexnord, has released the 26BF flat motor, described by the company as “a game-changer for tattoo machines” due to its focus on shock insensitivity. Features include rugged ball bearings that withstand 100 N axial load, 10% higher continuous torque (3.5 mNm) than competitive BLDC motors, dynamic due to low inertia of 7.8 gcm², flat form factor for easy integration, and increased machine miniaturization. — Chelsea Fisher EA ELECTRICAL APPARATUS | DECEMBER 2023 41
12ProductShowcase.indd 5
11/10/2023 9:37:56 AM
Feature | Pump It Up
A tale of two pumping stations A pair of case studies show the consequences of replacing a water-treatment system all at once versus doing so over time By Kevin Jones, EA Senior Editor To repair or replace? That’s the question people in the industrial service and repair industry must frequently answer. If the decision is to replace, the question then becomes, Do we replace an entire system all at once, or do we do so component by component, over an extended period of time? The answer to that question depends on the system being replaced, whether an industrial process, a discrete manufacturing line, or a water treatment facility. An approach that’s right in one situation may not be right in another. Attendees at last October’s Weftec conference and trade show at McCormick Place in Chicago heard from water technology practitioners who oversaw two separate pump station upgrades, one of which was carried out over time and the other in one fell swoop. On the whole, the replacement that was carried out all at once appeared the least problematic of the two. In a conference session that was actually two sessions in one, a pair of pumping station upgrades were described, both of them in the Empire State: one in Sherman, N.Y., and the other in Niagara Falls, N.Y. In Sherman, the utility replaced an old wet-well system with a newer method of direct in-line pumping. In Niagara Falls, a pumping station built during the Great Depression under the Works Projects Administration was rehabilitated in several stages. The Sherman project sounded, to at least one attendee, almost too good to be true, while the Niagara Falls project was rife with problems.
by “just me and the other part-time guy,” said Irwin. Prior to the pumping station upgrade, he said, “all the maintenance was pretty much up to us.” The equipment in the pumping station was installed in 1979. Prior to a 2018 upgrade, the system was seeing numerous clogging problems, with buildup of fats, oils, and grease making frequent maintenance necessary. A bar screen needed to be raked weekly — a job that took about an hour each time — and the tracks needed to be vacuumed every other month. These maintenance requirements were hardly surprising given the nature of the technology. A wet well pumping station, for those unfamiliar with the configuration, is a facility that collects and pumps wastewater from a building or group of buildings. The wastewater is collected in a large tank called the wet well, which has both inlet and discharge pipes. The wet well is designed to hold wastewater until the wastewater reaches a predetermined level, at which point the pumps are activated to pump the fluid out of the well and into the discharge pipe. The discharge pipe carries the wastewater to a treatment plant or other disposal site. The pumps in the wet well are typically of the submersible type. It’s easy to see why a wet-well pumping station can present maintenance challenges, especially as a pumping station ages. The pumping station in Sherman was no exception. By early 2018, grease in the well was reaching a depth of two to three feet, Irwin said. A birdcage sensor would periodically get into the grease layer
An all-at-once upgrade Describing the all-at-once upgrade carried out in Sherman were Jay Irwin, chief wastewater operator at the town’s wastwater plant, and Brad Hitselberger, municipal business development manager at Industrial Flow Solutions of New Haven, Conn., the company that provided the direct in-line pumping system. Sherman, a village of about 320 households in western New York State near Lake Erie, is served by a single pumping station. Operations are carried out
The photo above shows the direct in-line pumping system in Sherman, N.Y., that replaced a wet-well system, significantly reducing downtime and maintenance costs. In the inset, Jay Irwin (in the yellow shirt), chief operator at the Sherman wastewater treatment plant, discusses the project with Sebastian Puerto-Arenas, Northeast regional sales manager at Industrial Flow Solutions, the company that provided the direct in-line system. — Images captured from Industrial Flow Solutions video
42 ELECTRICAL APPARATUS | DECEMBER 2023
12pumps.indd 2
11/10/2023 9:38:52 AM
and show no-flow, shutting off the pumps. Another problem was the confined space in which maintenance had to be carried out. Irwin and an assistant were constantly lifting buckets of grease out of the well. The town of Sherman decided that the time had come to replace the wet-well centrifugal pumps. Enter Flow Solutions, the company that provided the direct in-line pumping system, a technology that Jay Irwin had read about in a trade magazine. Direct in-line pumping was introduced in Europe in 2003 and since then has been making inroads among U.S. water utilities. Sherman was among the first installations in the U.S. to install Flow Solutions’ system. The OverWatch system is designed to lift influent from the point of entry, eliminating the need for a wet well. The influent is contained, eliminating odors and reducing maintenance needs. The system utilizes smart water technologies to adjust pump speed in real time to match flow demands while detecting and removing clogs without human intervention. The stainless-steel body is designed to withstand the effects of corrosion from harsh materials. The installation in Sherman was completed in 11½ hours. The advantages of the new system, according to Irwin and Hitselberger, soon became apparent. There were no more visits from the vac trucks and no transducer issues. There’s a better hydraulic range and the space is less tightly confined. There have been no pump clogs in the five years since the in-line system was installed. Other benefits pertain to: > Maintenance. Downtime from clogged pumps is minimized if not eliminated. There’s no need for wetwell cleaning. In the absence of sulfuric acid, the life of ancillary equipment is prolonged. > Odor. The unpleasant smells emanating from the well have been eliminated. “You can’t really put a price on people’s complaints about odor,” said Irwin. > Safety. There’s no effluent stored within a confined space and thus no exposure to dangerous hydrogen sulfide gas. > Footprint and excavation. The modular construction of the OverWatch in-line pumping system allows for unique configurations. Only 23 is needed from the centerline of the inlet. Both scheduled and unscheduled maintenance have been dramatically reduced — and the financial savings have been significant. Prior to the upgrade, regular well cleaning cost $3,680 per year, clearing clogged pumps cost $2,880, and preventative maintenance cost $1,920. Now, there’s one unscheduled maintenance event in five years for a total of two hours. Annual savings are calculated to be $8,480.
The multi-phase upgrade Such was the experience in Sherman. In Niagara Falls, a pumping station built in 1974 on the site of one built during the Great Depression underwent
12pumps.indd 3
three rehabs over a span of 30 years, encountering various problems along the way. Explaining it all were Casey Cowan, senior project manager at GHD, an engineering firm that worked with the utility, and Richard Roll, who is retired from the Niagara Falls Water Board. For the first rehab, carried out in 1993, the station’s three pump sets were replaced sequentially. Motors were upsized to 500 hp to drive the new pumps and switched to a vertical orientation. Overhead crane replacement was necessary. New variable-frequency drives were installed. The pump room was modified, with a smaller footprint for the vertical pumps. Construction began promisingly, with favorable bids and a subsidy granted by Niagara Mohawk (now a subsidiary of National Grid USA) for energy-saving measures. There was good progress on electrical and HVAC contract work. Problems emerged, however, with the general contractor, who was lax about safety, periods of inactivity, and quality of work. All of this adversely affected the attitude of workers. The problems weren’t confined to the job site. Payments were missed and liens filed, affecting the contractor’s ability to work at all. In January 2002, the contractor filed for Chapter 11 bankruptcy; two months later, it went into Chapter 7, with the State of New York declaring, “You’re done.” Nonetheless, rehab on the pumping station moved forward. A new contractor from downtown Buffalo retrieved equipment “in unsecured storage from the former contractor,” but “the fun wasn’t over yet,” Cowan and Roll recalled. The new pumps were loud. Flow separation was occurring beneath the impeller eye owing to a high-velocity stream passing around a short-radius 90° bend. After these problems were resolved, problems emerged in the GFM gravity section. With increasing frequency, there were surcharges in the lowest gravity section manhole — surcharge would come up to the rim and “flow down fourth street — not something any mayor wants to see.” Over the next few years, as the new equipment began to age, more problems emerged. There were power supply interruptions, electrical faults, VFD malfunctions, pump wear, decreased performance — all of which led to increased downtime for maintenance. The second rehab at the Niagara Falls pumping station was initiated in 2006 and completed in 2009. For this job, the pumps and motors were sent back to the OEM for complete rebuild. A manufacturing facility in Wisconsin was specified for the pump work, while the motors were rehabilitated locally. Pipes and valves were also replaced, each pump suction pipe was upsized, and discharge check valves were replaced with electrically controlled suction valves. A new security system was installed to deter vandals. Ten years after the 2009 rehab, it was time for new pumps, and so began the third and most recent rehab. The pump bases were removed and replaced, the pump impellers were changed from three- to fourvane, and all three VFDs were changed as well, to go along with the new pumps. A complete vibration study was done and influent channel grinders were replaced. Adding to the complexity, work on this rehab was held up by the pandemic. The project was finally finished in 2022. Cowan and Roll learned some valuable lessons from these three rehab projects. Don’t fear contractor bankruptcy as the death of your project; it can bring new life and a successful conclusion. If your facility is in a remote area, “think like a vandal” — i.e., like the graffiti artists who see walls as blank canvases. Resign yourself to having current design efforts limit future flexibility. And finally, don’t expect to anticipate every change the next crew will need to make. EA ELECTRICAL APPARATUS | DECEMBER 2023 43
11/10/2023 9:38:54 AM
Feature | Training & Education
Gen-Zeal
Younger generation’s training modules look different but still yield enthusiasm By Chelsea Fisher, EA Contributing Writer The influential Institute of Electrical and Electronics Engineers reported enthusiastic feedback from high school age students who participated in its 2023 TryEngineering Summer Institute, held during June and July on several university campuses across the U.S. An October recap of the program reflected positive feedback from participants in the 10-day camp, which educates students ages 13 to 17 by providing what it calls “an immersive and fun approach to learning and engineering.” The focus of the program is primarily on hands-on experience and interaction with the current professional workforce. It involves field trips, group work, and demonstrations. The program began in 2018 with 80 students. This year, it had ballooned to 330 attendees, according to IEEE Spectrum’s Christine Bava. This year’s areas of study were of the “trending” variety, Bava reported, including engineering technologies such as artificial intelligence and microcontrollers. Applications to specific workforce sectors included aerospace, hydraulics, robotics, and wireless communications. In addition to this — and in keeping with much of the modern workforce environment — the teens “took a deep dive into the ethical issues that face engineers, as well as what to expect when pursuing higher education and a STEM career,” according to Bava’s report.
In Texas, students at Rice immersed themselves in lab work at the Oshman Engineering Design Kitchen, a space for undergraduate students to design, prototype, and deploy real-world engineering projects. The teens met with faculty members and devised solutions to engineering challenges such as building a hydraulic robot arm and creating a light sculpture. “A highlight for the campers in Houston was a day-long visit to NASA’s Johnson Space Center,” Bava added. “In addition to enjoying a guided, behind-the-scenes tour, they met with former astronauts, who explained the engineering design of their rockets and gave career advice.” Oshman has a history of working with younger engineering prospects, including its FABSHOPS program, which offers various fabrication classes. Students in San Diego constructed gliders and visited Qualcomm.
Generous financial support An important component of the TryEngineering Summer Institute is the financial support students receive from IEEE groups. Thirty-one students were awarded assistance thanks to the IEEE Educational Activities Scholarship Fund of the IEEE Foundation. A special thanks goes to these IEEE organizational units, which provided funding for the scholarships: the Broadcast Technology, Communications, Computational Intelligence, Electronics Packaging, Industry Applications, Microwave Theory and Technology, Photonics, Power & Energy, Power Electronics, Robotics and Automation, Signal Processing, and Solid-State Circuits societies, as well as the Council on Superconductivity. EA
Real-world solutions Group work is a common method for training students of these ages, and the IEEE summer program is no different. Students participated in a final group challenge, an activity called “Real World, Real Solutions” where they worked in teams to solve a problem and create a prototype using the engineering design process. This year, the TryEngineering Summer Institute was held at the University of Pennsylvania, in Philadelphia; Rice University, in Houston; and the University of San Diego. There were two sessions on each of the three campuses. One field trip took students to the Boeing facility in the southwest Philadelphia suburb Ridley Park for a firsthand view of aerospace manufacturing. Others toured Philadelphia International Airport and spent time with an engineer responsible for keeping one of the nation’s busiest transportation hubs running.
The students from TryEngineering Summer Institute held at the University of Pennsylvania, in Philadelphia, got a behind-the-scenes look at the Boeing aerospace facility in nearby Ridley Park. — IEEE photo
44 ELECTRICAL APPARATUS | DECEMBER 2023
12TrnEdu.indd 1
11/10/2023 9:39:33 AM
Names & Faces will likely fill the 1,800 positions by July Verizon Communications, Inc., is look2026. ing to hire 1,800 additional technicians Xcel Energy has named Chris Church focused on building, maintaining, and as the company’s new chief installing Fios home internuclear officer, effective net to support its broadband Dec. 15. Church succeeds expansion across the East Pete Gardner, who is retirCoast, according to an Oct. ing at the end of the year af17 statement from the wireter serving in the role since less service provider. 2020. The company hires in New “Chris has had an unblinkYork, New Jersey, Massachuing commitment to operasetts, Rhode Island, Washtional excellence over his ington, D.C., Virginia, Pennyears of leadership experisylvania, Maryland, and ence in the nuclear indusDelaware. Chris Church try, including his time at Many of the positions will Xcel Energy,” said Tim O’Connor, Xcel be areas where Verizon has committed to Energy executive vice president and expanding internet service in rural and chief operations officer. “This experience underserved communities with funding makes him supremely well qualified to partly provided by the American Rescue build on our track record Plan. as an experienced operator Tony Lewis, vice president of carbon-free, always-on of state and government afnuclear power plants.” fairs at Verizon, said, “These The strong performance jobs help empower individuof Xcel Energy’s fleet at als and their community and Monticello and Prairie Isare made possible by local land, Minn., is a key factor and state governments parthelping the company cut nering with Verizon to excarbon emissions by 53% pand high-speed broadband from 2005 levels. access to their residents.” The Monticello and PraiThe Communications Greg Netolicky rie Island plants provide Workers of America or the about 30% of the power the company supInternational Brotherhood of Electrical plies to customers in the Upper Midwest. Workers will represent the roles. Verizon After leaving the Navy, Mr. Waid worked for Dusenbery, Inc., on material slitters, winders, and unwinders. In subsequent years, many N.J. motor repair Albert ‘Al’ Waid, shops turned to him as their contracted field tech and shop owner field service technician of choice. Clients included Longo Electric, Universal ElecAlbert “Al” Waid of Sussex, N.J., a Navy tric, Reliable Electric, Electrical Equipveteran, longtime field service techniment, Atlantic-Kenmark, cian, and motor shop owner, Chiswick Electric, and died Sept. 18 at the age of 81 Gambino Electric. after a long illness. He was also a principal Born in Dayton, Ohio, to the of IEM, Inc., and owned late Ralph and Margaret (Gray) a small motor repair Waid, Mr. Waid was among shop in Toms River, N.J., the first field service technibefore returning to be a cians in the 1960s to work freelance service technion transistorized d-c motor cian until his retirement controls and circuit boards around 2019. in the metro New Jersey, New Mr. Waid was predeYork, and Pennsylvania areas, ceased by his parents, family and friends recall. He Albert Waid Ralph and Margaret Waid. learned his electronic trade He is survived by his wife, Lois (Ippolito); during a stint in the U.S. Navy, where his daughters, Colleen Waid, Jill Waid, he also proved himself proficient in a-c and Renee Granados; and a grandson, motor rewinding and generator troubleJustice Urena. EA shooting.
Deaths
12nam.indd 1
Because nuclear plants generate carbonfree electricity around the clock, they complement wind and solar resources while providing hundreds of good-paying jobs in their communities. Workforce solutions company TrueBlue announced Oct. 23 that Greg Netolicky has joined the company as “chief people officer” reporting directly to president and chief executive officer Taryn Owen. Netolicky has more than 20 years of experience across all aspects of human resources, spanning Fortune 500 and privately held organizations. Most recently, he served as the chief human resources officer for Rite-Hite Holding Co., a global manufacturer. Netolicky also served as vice president of human resources, components, and integrated supply chain at Johnson Controls. “Greg will be a great addition to our leadership team. He is an exceptional culture fit and has a proven track record of aligning people strategy to drive organizational performance,” said Owen. “I am confident that Greg will help ensure TrueBlue remains a top destination for talent where our employees can advance and thrive.” — Charlie Barks EA
Adjustable Motor Base
TM
keeps improving!
Our Adjustable Motor Base is continuously improving to be the most durable and longlasting motor base on the market. With the latest patent pending advancement, Overly Hautz motor bases now last 5 to 9.5 times longer than the competition. Decrease downtime and save money with extended motor base life cycles. Read the verified factory test report at: www.overlyhautz.com TM
“CONTINUALLY IMPROVING THE BEST MOTOR BASE”
ELECTRICAL APPARATUS | DECEMBER 2023 45
11/10/2023 9:40:04 AM
Utilities One utility executive’s lessons from the pandemic
Improving the quality of customer care was high on the director’s agenda, and the pandemic was a time when customer service was put to the test. In retrospect, one can see that DPU didn’t just rise to the challenge but upped For many individuals, the Covid-19 pandemic provid- its game in the process. ed time alone to look within themselves and see how To date, the city has distributed some $21.3 million in funding under the they could become better people, either by dropping CARES Act and the American Rescue Plant Act, two emergency federal inibad habits or developing healthy new ones, or both. tiatives that provided financial relief to Americans struggling under the ecoLikewise with organizations. Many, both public and nomic hardships of the pandemic. Last February, DPU introduced Promiseprivate, took the opportunity to examine how they were Pay in partnership with Promise, a company that creates software to aid doing things and found ways to in relief distribution, rebate programs, income verificaconduct their operations more effition, payment plans, and other elements of customer ciently and become more sensitiveservice. ly attuned to the needs of employees DPU also conducted customer outreach and engageand customers. ment. “We are in the community and want the customIn the realm of public utilities, ers to understand what we’re doing,” Bingham said. As the Dept. of Public Utilities of Richpart of this outreach, a monthly newsletter explaining mond, Va., or DPU, stands as a good utility matters is sent to all customers. example of how one provider of gas, DPU is trying to provide a soft landing for customers water, and electric services dealt emerging from the difficulties of the pandemic. “We with the stresses of the pandemic don’t disconnect because of the pandemic,” Bingham and emerged better for it — more said, but the utility is trying to normalize operations adaptable to the needs of customnow, and customers must “understand and embrace ers and sensitive to the needs and engagement with aging receivables.” Bingham calls the expectations of employees. level of customer care afforded by PromisePay “a soluSpeaking on behalf of the Richtion for the future.” mond utility at the Weftec trade April Bingham, senior director of the That’s the customer-relations part. In addition to expo at Chicago’s McCormick Place Dept. of Public Utilities for the City of looking outward toward customers, Bingham has also — City of Richmond photo this past October was April Bing- Richmond, Va. guided the utility towards looking inward, finding ways ham, senior director of public utilito improve the lot of DPU employees. As a leader, “I ties for the City of Richmond. She joined the utility as needed to spring into action” and “create an environment where people first deputy director of customer service in February of 2020, wanted to be,” said Bingham. a month before our lives were upended and the way One challenge was to improve internal communications. In the absence of many of us work was changed forever. Bingham herself communication, people “make stuff up,” Bingham observed. “We started to will tell you that her time at Richmond has thus far been focus on how do we communicate timely, effectively, and honestly.” defined by the pandemic and its aftermath. Then there was the question of dedication. Bingham challenged employees The native Washingtonian and 27-year utility veteran to commit to “falling in love with their job again.” Many DPU employees have began her career at Washington Gas as a temporary been at the utility for 45 or even 50 years; things get stale after a while. Bingemployee processing return checks. “I saw employees ham invited employees to think about when they were new on the job. “You walking around smiling, laughing, engaging with each are not the same person,” she said. “You’ve seen some things, you’ve grown other, and I wanted to be part of it — wanted something from some things, you understand some things. Prepare for the future.” long-lasting,” Bingham recalled. She did her job as best She also urged employees to “have the courage to speak up, step up, and she could, giving people feedback, analytics, and de- have the courage to take a chance on yourself.” As employees become entails. The result: “I was given more work to do,” she said. gaged with the utility, “I really get happy,” Bingham said. “My employees are As she rose through the organization, more people came truly phenomenal.” to believe in her. The employee’s experience is closely tied to the customer’s experience, From Washington Gas she went, in 2008, to DC Water, according to Bingham. Employees need an environment in which they can rising to the position of manager of meter and field ser- learn, grow, and adapt to the future. “Think about the customers, three vices. From there it was on to Richmond, capital of the years in a pandemic,” Bingham said. “They have less expectations of all of Commonwealth of Virginia, home to the James River, “a us. Our employees are somewhat caught in the middle; they want technolgreat place to live, play, and work,” in Bingham’s opin- ogy, support, more people on the team.” ion. “We are recognized nationally for creative soluUtility employees have received unwanted negative attention, which, if tions, green infrastructure, and quality water,” she said. not addressed, might erode morale. “In the city of Richmond, we too have had our share of the media,” said Bingham. “Someone gets upset, they won’t call us, they’ll call the media.” Therefore, “We had to be sure that our customers didn’t get fed up.” On a personal level, the pandemic has provided Bingham with the opportunity to reflect on her own role as a leader. The job she accepted back in February 2020 didn’t come with the description of “mother, the friend, the lawyer, the doctor, the one that somebody leans on,” she said. And yet under the stress of the pandemic, she has discovered that “our employees need so much more from us today than ever before.” — Kevin Jones EA Special thanks to Jamie Decker, PE, of Hazen and Sawyer, Columbus, Ohio, for contributing to this report. — Editor
On a personal level, the pandemic has provided Bingham with the opportunity to reflect on her own role as a leader 46 ELECTRICAL APPARATUS | DECEMBER 2023
12utl.indd 1
11/10/2023 9:40:38 AM
Classified
Business Opportunity
Equipment for Sale
LOOKING TO RETIRE
RATES AND INFORMATION
Well established (66 years) Long Island,
Regular classified ads - straight
NY motor shop and industrial electrical
lineage with optional logo:
contractor looking for a new owner, or
FOR SALE
interested in hiring an employee to come
One Phoenix Motor tester –
Per 8 pt. line (1 column width): $13.00. (Blank lines for spacing also charged.) Minimum charge: $65.00. $6 confidential box number system. B/w or color logos and limited formatting may be added for additional charges. Available categories: Business for Sale; Equipment for Sale,
and learn our successful practice to possibly purchase the business. Owners looking to retire. Heavy mechanical background, drives, and
Classified Display ads advertiser’s own art with no category limitations*: $150 per column inch; minimum 12 inches in 12 months. Maximum ad size in one issue, 3 inches. Add color $100. For more information, closing dates and requirements, contact
$18,900.00 or best offer. Call 1.908.296.3243 - Ask for Al.
PLC knowledge a plus. Plenty of room for expansion. All replies are confidential. Reply to Box 30,
Equipment for Sale FOR SALE - STEELMAN BAKE OVEN
barbara@barks.com
Steelman Gas Bake Oven, Model 466GTC
Equipment Wanted; Help Wanted; Position Wanted; Training.
Model# MTS5-300-225
Working Condition, Pulled Out of Service
Equipment for Sale
Due to California Regulation Call Chris: (323) 583-1040
FOR SALE CAM Peerless Industries 10K lb. cap.
Email: chrism@superiorelectricmotors.com.
banding lathe. 8’ working length, wire and fiberglass tensioning devices, 25 ton bridge/ cable hoist with runway/uprights. Leblond 27”X96” horizonal engine lathe, Victor
Equipment for Sale MOTOR / PUMP CONTROL PANELS
vertical mill 50” X 10”.
New Surplus Simplex & Duplex 3 Phase
For more info email: acmotor61@gmail.com.
208/230/460 Volt, NEMA 4 Enclosure up to 133 Full Load Amps
Barbara Wachter, Advertising
Best Name Brand Components
Director E-mail: barbara@barks.
Hand Off Auto Alarms Etc.
com Phone: (312) 626-2316
$1,500.00 each
*subject to Publisher’s acceptance
For more info email: semci@yahoo.com
Cy’s Super Service
COPYRIGHT 2023 ELECTRICAL APPARATUS
ELECTRICAL APPARATUS | DECEMBER 2023 47
December 2023 Classified.indd 1
11/10/2023 9:44:03 AM
Help Wanted
Help Wanted
Help Wanted
$6000 SIGN ON BONUS!
SHOP FOREMAN
SIGN ON BONUS!
Westside Electric Inc
R/S Motors, a St Joseph, MO based company,
WINDING FOREMAN for Maine’s largest
Located in Jacksonville Florida
has an immediate opening for a mechanic/
motor repair facility located in Bangor, ME.
Experience in all areas of electric motors, AC
Experienced in Random, Form, DC and
& DC, generators, pumps. These repairs are
TOP PAY, RELOCATION ASSISTANCE
found in a typical EASA repair facility. Must
Hydro winding. Maine has excellent hunting, fishing, hiking and skiing.
Company offers uniforms,
vacation, 401K, health insurance, dental
have good management and coordinating skills to advise and assist technicians in completing the jobs in a timely and accurate
machinist/winder. Both AC & DC motors. Experience preferred but can support on the job training. Offering competitive wages, 100% company paid health, 401K, PTO-2 weeks vacation the first year. Relocation allowance. Friendly hours. Family owned company with a great environment and
manner that will satisfy the customer and
insurance, paid holidays and vacation.
people. Please submit any inquiries or
be profitable. The Foreman is responsible
résumés to info@rselectricmotors.com.
Option of working 4 or 5 day work week.
for scheduling shop work and field service
Please email résumé to bmichaud@acelec.
and insuring that the customer’s needs are
com or mail to AC Electric Corp, 40 Target
met. Safety procedures, customer relations
Industrial Circle, Bangor, ME 04401.
and the knowledge of test equipment are
Business and building on 1 acre. Full service
electric.com or call (904)757-1126.
electric motor rewind, sales and repair
Help Wanted
INDUSTRIAL SERVICE OF NASHVILLE
facility in south central Colorado. Established 50 plus years. Over 4,000 vertical irrigation pumps, averaging over 30 horsepower,
is looking to hire a qualified motor winder
alone. Great location for hunting, fishing and
competitive pay
skiing. Owner would like to semi-retire and is
paid vacation
willing to help new owner.
health and dental ins paid holidays
GlobalTech, a Houston, TX based company,
uniforms provided.
has an immediate need for a Production
in business since 1987
Manager. The ideal candidate will have
indserv@bellsouth.net
BUSINESS FOR SALE
required. Send résumé to bruce@westside-
Help Wanted
Contact- Terry Mapes at 615-385-2240 or
Business for Sale
a
strong
management/supervisory
background in the motor repair industry. This is a key management position within the company. Strong technical skills are a must and an engineering degree is desired.
We offer a highly competitive
compensation package including health, dental, vision, and 401k.
If you have
the skills we are looking for and are considering relocation to Houston, please send your résumé and salary requirements
Email anc.electricmotorrepair@yahoo.com
Digital copies!
Bookmark these links to access digital flipbooks of recent and upcoming issues. Content will be posted by the first of each month. DECEMBER https://bit.ly/DEC23BUYR EMBR24 https://bit.ly/EMBR24FULL JANUARY https://bit.ly/JAN24ROBO FEBRUARY https://bit.ly/FEB24EA-LEAP
to frank@globaltechmotors.com. 48 ELECTRICAL APPARATUS | DECEMBER 2023
December 2023 Classified.indd 2
11/10/2023 9:44:09 AM
Help Wanted
Classified Display
Help Wanted
Platinum Performance discusses the lifespan of a mechanical seal
ELECTRIC MOTOR TECHNICIAN SUPERVISOR - 2ND SHIFT
POSITIONS AVAILABLE
10+ years exp w. industrial AC/DC electric
High-quality seals, like those provided by Platinum Performance Products, are designed with durability in mind and can often outlast cheaper alternatives. Our seals are made with premium elastomers, which enhance their durability and longevity, requiring fewer replacements over the pump’s life. If you have any questions about choosing the right seal for your application, our team Platinum Performance Products is always here to help. Visit www.3ppumps.com to learn more.
motors, generators & electro-mechanical equipment repair. Must have previous supervisory exp. $28-$34/hr + 12% shift differential + supervisor pay. Excellent benefit package: 401k, medical, dental, vision, vacation, sick pay, paid holidays. EEO Apply at bit.ly/mti_jobs
515 Willow Springs Lane
• Shop Manager • Motor Mechanics • Pump Mechanics
commensurate
with
experience;
excellent benefits; team environment. For
Professionally built to your needs, using your parts or good used components. 50-
Puzzle solutions are online at http://barks.com/puzzles
candidates for the following positions:
Salary
MOTOR TEST PANELS
York, PA 17404
in Richmond, VA is currently looking for
• Field Service Techs
Equipment for Sale
Motor Technology, Inc.
Electrical & Mechanical Resources, Inc.
2,000 hp, 120-4160v AC/DC, w/wo computer efficiency reports, 30 years experience. Info/ examples on Motorteststand.com
N
E
C
E
S
S
A
R
I
L
Y
R
O
T
M
A
C
H
I
N
E
G
E
H
I
A
E
S
T
Y
E
R
N
L
M
E
T
D
E
N
L
G
I
I
G
N
E
E
A
E
E
R
R
I
T
N
N
E
R
G
C
E
A
S
C
P
U
N
I
I
E
N
I
E
P
N
M
B
A
R
A
O
C
E
L
A
I
E
S
C
M
L
E
A
N
C
P
I
T
N
G
A
S
L
E
S
S
E
P
T
C
I
M
A
N
Y
D
O
R
E
A
consideration, please send your résumé lo Pam Marriner, at pmarriner@emrva.com.
Visit us online! www.barks.com
The EA word search A search for meaning In the grid at left, find and circle the words listed below, which are taken from Engineering Editor Richard Nailen’s “Say it right” article in this issue. Arrange the uncircled letters in order and they will spell out a meaningful insight. The solution may be found online at http://barks.com/puzzles, or call (312) 321-9440. Happy hunting!
AC Aerodynamic Alone Application Arab Attempting Bungler Clearly IEEE Machine
Materials Necessarily Needs Paper
ELECTRICAL APPARATUS | DECEMBER 2023 49
December 2023 Classified.indd 3
11/10/2023 9:44:12 AM
Help Wanted
Help Wanted
Help Wanted
EASA SEEKS MOTOR ENGINEER ELECTRIC MOTOR WINDER One of the Northeast’s largest independently owned electro-mechanical repair, sales, and field service facilities is looking to hire an electric motor winder. The qualified electric motor winder applicant should have a minimum of 3-5 years experience in rewinding DC and AC electric motors. This individual needs to be self motivated and
Join
EASA’s
world-renowned
technical
support team! EASA seeks an engineer with at least 5 years of experience in repair,
JOB OPENING
service, maintenance and/or redesign of
Advanced Rotors is looking for a General
ac and dc motors. Must understand motor theory as well as application and be able to communicate effectively in a fast-paced
Applicants need to call and ask for David
consulting role. Some travel required. For
Watson (256)352-5150.
more info, see easa.com/careers.
willing to work independently, as well as a team. We offer competitive wages, health, dental, vision insurances, paid holidays, sick time, earned time off, paid life insurance, short term disability insurance, and a 401K with company match. Relocation assistance is available. Please send résumés to dave@ applied-dynamics.com
Coming in January Robotics, machining, automation!
Competitive salary; excellent benefits; team environment. Remote work option for the
This is an exciting role with variety that impacts the entire indsutry. Send cover note and resumé to Linda Raynes; lraynes@easa.com.
INSIDE SALES SPECIALIST
Electric Motor Shop in Wake Forest, NC, is
Ideal candidate works cooperatively with members of the sales team to increase sales by uncovering lead opportunities, establishing new accounts and proactively cultivating existing accounts. Must be comfortable making dozens of calls per day, generating interest, qualifying prospects and closing sales.
looking for candidates for: • Field Service Techs • Manual Machinists • Motor Mechanics
COMPETITIVE PAY, BENEFITS & OT!!
• Outside Sales Reps
Prime Electric in Gorham, ME is looking for
• Field Service Manager
an experienced Electric Motor Technician.
• Pump Mechanics
& advancement opportunities. Safe, friendly environment. Call 207-591-7800 or email résumés to dan@PrimeElectricMotor.com. Visit us at PrimeElectricMotor.com.
Elektrim Motors, an AC NEMA and metric IEC stock and custom motor manufacturer since 1919, is looking for confident, results-driven individuals to join our team.
Help Wanted
The business issue!
Relocation compensation, training program
Help Wanted
right candidate.
Coming in February -
Help Wanted
Manager.
• Switchgear Specialist • Winders Electric Motor Shop offers competitive pay and benefits, including 401k. For employment consideration, please contact Kristine Larsen at 919-556-3229 or by email at Kristine.Larsen@emsnc.com
ELECTRIC MOTOR SERVICE TECHNICIAN & SCHAUMBURG, IL SHOP MANAGER. Ideal candidate will be experienced in troubleshooting, repair, rebuild of all types of AC motors. Strong communication skills required. OUTSIDE SALES / NEW BUSINESS DEVELOPMENT MANAGER. Ideal candidates will be solutions-based OEM sales experts with a working knowledge of electric motors and their applications. Travel is required more than 50% of time. Elektrim Motors offers competitive pay and benefits including 401k. Send inquiries to careers@elektrimmotors.com.
50 ELECTRICAL APPARATUS | DECEMBER 2023
December 2023 Classified.indd 4
11/10/2023 9:44:17 AM
Help Wanted
Help Wanted
Help Wanted
LARGE REPAIR CENTER KELLER ELECTRICAL in beautiful Arizona needs to add to our
ELECTRIC MOTOR WINDER
talented staff.
Best Repair Company in Norfolk VA is looking for qualified candidates for:
We are in need of AC/DC Motor Mechanics, Winders, Manual/CNC Machinists, Welders
• Motor Winders
and Millwrights.
• Pump Mechanics
Relocation assistance may be provided for
• Manual Machinist
the right candidates.
• Shop Helpers BRC offers a competitive salary, health insurance & 401K plan. Visit our Web Site at www.Bestrepair.net or contact gary.phelps@bestrepair.net if interested.
Advertise with us! email barbara@barks.com
We are an EOE and are able to offer competitive benefit packages along with
MOTOR REWINDER Motor Rewinder needed for expanding business in beautiful Hawaii. Candidate must
attractive PTO. If interested please email your current
have mechanic knowledge as secondary
résumés to:
skill and experience rewinding electric
rob.rayl@otcindustrial.com
motors up to 4160 volts. Send résumé to
adam.geron@otcindustrial.com
mark@sakoelectric.net
brad.blackwell@otcindustrial.com
Classified Display
Classified Display
Classified Display
LED Stroboscope Makes cycling objects appear stationary for inspection and measurement ESL-200 Standard LED ESL-200UV Ultraviolet LED ● Up to 150,000 fpm/rpm ● Rugged metal housing UV Model ● x2 and ÷2 buttons Available! ● Phase shift ● Store 9 flash rates in memory
866-527-4666
www.hoto-instruments.com
Moe, Genny & Friends
COPYRIGHT 2023 ELECTRICAL APPARATUS
ELECTRICAL APPARATUS | DECEMBER 2023 51
December 2023 Classified.indd 5
11/10/2023 9:44:22 AM
ADVERTISING INDEX ABB Motors US . . . . . . . . . BC Advanced Rotors, Inc. . . . . . . 10 AHR Expo . . . . . . . . . . . . . 17 BAE Wire & Insulation, Inc. . . . 51 Bartlett Bearing Company, Inc. . 7 CWIEME Berlin . . . . . . . . . . 19 Electrical Apparatus & Machine . . . . . 39 Electrom Instruments, Inc. . . . . 8 Hannover Messe . . . . . . . . 40 Helwig Carbon Products, Inc. . . 5 Hoto Instruments . . . . . . . . .51 Jasper Electric Motors, Inc. . . . 9 Lafert North America . . . . . . IFC Mitchell Electronics, Inc. . . . . .13 OTS Wire & Insulation, Inc. . . . 51 Overly Hautz Motor Base Company . . . . . 45 PJ Electronics, Inc. . . . . . . . . 28 Platinum Performance Products . . . . . 49 Seal Distributors . . . . . . . . . 15 Teco-Westinghouse Motor Co . 11 Toshiba International Corporation . . . 3 WorldWide Electric Corporation . . . . . .IBC Learn more about the products and services featured in this issue! Use the QR code or go to https://shout.com/s/nlTylF5o to request information from advertisers.
Direct & Current
DECEMBER 2023
DESIGNER’S DAY. Needham, Mass.-based electric motor design and software company ECM PCB Stator Tech has been named a winner in the Leadership In Engineering Achievement Program, or LEAP, Awards. ECM won in the 2023 LEAP Awards’ Software category for its PrintStator Motor CAD platform. The LEAP Awards celebrate “the most innovative and forward-thinking products and companies serving the design engineering space.” Winners were selected by an independent judging panel composed of a cross-section of OEM design engineers and academics. DE-WORKED. WeWork, the shared workspace company once valued at nearly $50 billion, filed for bankruptcy Nov. 6, putting an exclamation point on a downturn of in-office work in the global economy since the Covid-19 pandemic. The company said it expects operations to continue as usual in a Nov. 6 announcement, noting that it “maintains the strong support of its key financial stakeholdmostly empty WeWork office site. The shared workers” and has entered into a Aspace company filed for bankruptcy Nov. 6. — WeWork photo restructuring support agreement with holders representing approximately 92% of its secured notes. The company had 779 locations in 39 countries as of 2022, including 547,000 members. ON THE JOB. Total U.S. nonfarm payroll employment increased by 150,000 in October, and the unemployment rate was little changed, at 3.9%, the U.S. Bureau of Labor Statistics reported Nov. 3. Job gains occurred in health care, government, and social assistance. Employment declined in manufacturing “due to strike activity,” according to the BLS report, referring to the United Auto Workers strike. YOU ARE THE PASSENGER. The U.S. government announced $16.4 billion in new funding Nov. 6 for 25 passenger rail projects on Amtrak’s Northeast Corridor aimed at rebuilding tunnels and bridges that are over 100 years old. Tracks, power systems, signals, stations, and other infrastructure will also be upgraded. Combined with Amtrak’s nearly $9 billion fleet replacement program, which is intended to replace “over 1,000 locomotives and coaches with state-of-the art and made-in-America equipment,” the funding will also reportedly contribute to more than 100,000 jobs in construction. STEEL YOURSELF. A report examining steel decarbonization was released Nov. 9 with insights from steel manufacturers SSAB, Tata Steel, and Aperam, as well as experts from the American Association for Iron and Steel Technology and ABB. The report evaluated carbon capture, hydrogen, and electrochemistry as routes to a “fossil-free steel future,” spotlighting new approaches and technologies being used in Brazil, China, India, Sweden, and the U.S. — Charlie Barks Have the digital “Direct & Current” delivered each week, at no charge, to your e-mail in-box. Scan the code at right or sign up now at http://eepurl.com/dEkrB9.
52 ELECTRICAL APPARATUS | DECEMBER 2023
12d&c.indd 1
11/10/2023 9:50:16 AM
Industrial Products
Designed for demanding applications at affordable and competitive prices.
Call WorldWide (800) 808-2131
Proven Quality.
worldwideelectric.com
Electric Motors
- DC Motors
- Explosion Proof Motors
Motor Controls
- Farm Duty Motors
- Variable Frequency Drives - Soft Starters
- Across the Line Starters
- General Purpose Motors
- Pre-configured/Customizable
- IEC Metric Motors
Cabinets and Panels
- Marine-Duty Motors
- Remote Operation, Pilot
- Open Drip Proof Motors
Devices, Safety Switches,
- Pump Motors
Contactors & Relays
- Severe Duty Motors
- Stainless Steel Motors
- Vertical Hollow Shaft Motors - Motor Accessories
Generators
- Single Bearing
- Double Bearing - Pancake
Gear Reducers
- Shaft Mount Reducers - Worm Gear Reducers
- Helical Bevel Gear Reducers
- Helical Inline Gear Reducers - Parallel Shaft Helical Gear Reducers
- Accessories and Kits
Discover More Capabilities with Worldwide Electric’s Family of Brands 12WorldWide.indd 1 EA-2023.indd 4
11/6/2023 2:16:43 PM 10/27/23 9:58 AM
— Baldor-Reliance® direct drive motors Simple. Quiet. Clean. Safe. Efficient.
Baldor-Reliance direct drive motors mount directly to the fan shaft, eliminating pulleys, belts and gearboxes - increasing efficiency while reducing maintenance, noise and operating costs. Proven reliability. Tomorrow’s technology – available today.
12ABB.indd 1
— Scan here for more information
11/7/2023 9:23:58 AM