011_Accessories
3/29/13
10:20 AM
Page 82
PUMP ACCESSORIES MECHANICAL SEAL Made with a silicon carbide stationary seat, which is extremely hard and heat dissipative. Resists wear and dry running damage better than traditional, ni-resist and tungsten carbide materials. While Darley does not advocate running any pump dry, this seal has been run dry in testing for up to six hours.
REMOTE PACKING ADJUSTMENT CABLE Remote cables allow packing adjustments to be made from a hex-nut located below the running board.
INJECTION PACKING Optional injection packing within a packing gland can minimize friction, heat generation and apparatus down-town time and can be adjusted in minutes. Material is a plastallic composite.
3817104
Injection Packing
PUSH/PULL PRIMER VALVE Easy to install in 11/4" diameter panel hose. Connection ports are 1/2" NPT female. Assembly includes valve, cast panel plate, primer activation switch and wiring pigtail. Ship wt. 2 lbs. • Lightweight anodized aluminum construction • Large chromeplated T-handle
AM00100
Remote Packing Adjustment Cable
PUMP ACCESSORIES
ROTARY VANE PRIMER Positive displacement rotary vane vacuum pump for 20' to 28' suction lifts compatible with any fire pump. Constructed of heat-treated and hard-coated anodized aluminum alloy. Solenoid-operated motor runs from vehicle’s electrical system. Priming system includes bronze push/pull valve with electric switch, and complete mounting and operating instructions. Rotary vane priming pump with valve, solenoid and motor. 12 volt or 24 volt. Ship. wt. 42 lbs.
AP00950 AP00960
Rotary Vane Primer Fluid-Less Vane Primer
DRAIN VALVE
82
VM00310
Push/Pull Primer Valve
PUMP OVERHEAT PROTECTION SYSTEM Protect your pump from overheating with an easy to install stainless steel and brass temperature relief system. Preset temp of 120˚F, then dumps up to 55 gpm to atmosphere and resets automatically. Available in 12 and 24 volt. Rated to 600 psi and fits any pump.
AN00301
Pump Overheat Protection System
MASTER DRAIN
3 /4" NPT female Push/Pull design. Do not risk frozen lines or corrosion. Stainless steel shaft. Fast draining where needed.
Heavy brass tubing and plunger, stainless steel rod. Eight holes tapped for iron pipe fittings to hold copper tubing from up to eight locations.
5200100
VD00102
Drain Valve
1.800.323.0244 | www.darley.com
Master Drain