TRANSMISSION
THE NUCOMM NEWSCODER 4 from
ASI transport stream.
Integrated Microwave Technologies is a compact, low power, HD/SD, video/audio encoder with AES Encryption. Newscoder 4 delivers MPEG-4 H.264 SD and HD encoding, enabling broadcasters to transmit HD content over the same infrastructure used to transmit standard definition content.
In addition, the encoder has one stereo or two mono audio inputs, and supports both linelevel inputs and microphone-level inputs. Each mode supports independent gain selection ranging from 12dB of attenuation to +50dB and embedded audio.
“The Newscoder 4 defines the next level of video compression,” says Integrated Microwave Technologies President, Stephen Shpock. “With an additional 30% bit-rate reduction, low delays and video quality improvement over a baseline encoder, the MPEG-4 enabled encoder allows broadcasters to transmit HD content efficiently. Another advantage of the Newscoder 4 is its ability to support full main profile.”
Featuring two RS232 ports, one for remote control and a second for user data, the Newscoder 4 also employs AES encryption preventing unauthorised viewing of the signal. An incorporated video test pattern generator can be controlled externally through the preset switch or programmed to be automatically enabled when the video input is lost. The encoder has an ASI input and output providing the ability to stack or multiplex multiple units.
The Newscoder 4 input accepts either a composite (NTSC or PAL), SD-SDI or HD-SDI inputs. The encoder automatically detects the video input format, digitises and passes it to a H.264/AVC MP@L4 video encoder, where the video is compressed. The resulting output is an
For advanced functions, such as AES encryption keys or unit naming, an administration software package is supplied allowing the user to configure up to eight custom presets. Visit www.imt-broadcast.com
Quad-Split Multi-Viewer MIRANDA TECHNOLOGIES will be launching its standalone Kaleido-XQUAD quad-split multiviewer for truck and studio monitoring at IBC (Hall 8, Stand D41). Kaleido-XQUAD is an ultra-compact, super-silent processor which is ready to go straight out of the box, without the hassle of assembling modules or configuring options. Cost-effective large monitor walls can be achieved using multiple individual quads with inexpensive displays, whilst offering the assurance of a very small failure block at just four inputs. The quad-split operates with the same software as the larger Kaleido family multi-viewers and, because of Miranda’s cluster feature, the Kaleido-XQUAD can be linked to more quad split processors for large monitor wall quad views and operated seamlessly as one system.
The Kaleido-XQUAD processors also offer integration with NVISION and third party routers, with source control and centralised mnemonic database access, along with integration with third party production switchers, with tally support via direct serial interface. Kaleido-XQUAD is available in two versions: Kaleido-XQUAD features four 3Gbps/HD inputs and a single multi-viewer output (HDMI/HD-SDI), and Kaleido-XQUAD-DUAL offers eight 3Gbps/HD inputs and two multi-viewer outputs. To simplify signal management and avoid signal timing problems during live production monitoring, the quad-split also provides ultra-fast processing, which avoids the need for complex audio delay compensation. Visit www.miranda.com
Observer Mobile from Volicon
The ViBE EM4000 Multichannel HD Encoder.
THOMSON VIDEO NETWORKS will debut a range of new products at IBC (Stand 5.A17), including the new ViBE VS7000 Video System. The ViBE VS7000 is a fully integrated IP video solution for convergent applications such as Web TV and over-the-top services delivery, traditional IPTV, and IP/cable delivery. It combines all major audio/video codecs, the latest adaptive streaming formats, and a resilient IT platform for native redundancy and scalability. Also new is the ViBE EM4000 Multichannel HD Encoder which incorporates an evolved and powerful version of Thomson’s Mustang compression engine. The ViBE EM4000 is designed to deliver operational cost savings through better use of satellite or terrestrial bandwidth. Also on show will be the ViBE EM1000/EM2000 MPEG-2/4 SD real-time encoders which support all interfaces in a single unit to deliver legacy MPEG-2 SD at a 20 percent lower bit rate with no quality loss, reducing disparity with HD channels. The ViBE EM1000 and ViBE EM2000 now feature processing of MPEG-2/MPEG-4 compressed sources in addition to baseband signals, additional MPEG-1 Layer II audio encoders for multichannel units, forward error correction generation for primary distribution or IPTV applications, and new filters for processing pre-coded MPEG-2 sources on the ViBE EM2000. For those looking at DVB-T2 Headend Solutions, the NetProcessor 9030/40 Video Processor now includes a DVB-T2 interface for a more than 30 percent bandwidth enhancement, as well as MPEG-2/H.264 enhancements for splicing from a national feed to a regional program in a statistical multiplex without requiring rateshaping. Combined with the Sapphire MPEG broadcast server, it provides a comprehensive ad insertion solution.
to play, pause, search, and create logged content on demand using smart devices will provide broadcasters with instant access to the final broadcast product to ensure quality, compliance, and communication within the media enterprise.
The Sapphire MPEG Broadcast Server provides a “channel-in-a-box” solution with advanced capture, playout, and regionalisation capabilities, operating frame-accurately in the compressed domain. Sapphire provides all the functions needed to ingest, process, brand, and generate TV channels ready for air. New features include frame-accurate clip editing enhancements, advanced logo insertion features (support for H.264, new scheduling capabilities), and BXF support. These new features improve the flexibility of the video server, in particular when used with external automation or traffic systems.
Visit www.volicon.com
Visit www.thomson-networks.com
VOLICON RECENTLY ANNOUNCED the introduction of Observer Mobile - a newly streamlined web-based interface that supports H.264 on Apple iOS devices using the Safari web browser with native support for iPad, iPhone, and other mobile devices. Designed specifically for media executives on the go, Observer Mobile provides greater flexibility, portability, and the added convenience of accessing live Observer streaming along with back navigation of previously recorded content from both local and remote locations. The ability
Convergent TV from Thomson Video Networks
TRANSMISSION
HD Over SD Infrastructure
73 3056 C&T Mag_Sept_BACK_FA.indd 73
1/09/11 1:25 PM