Published Nationally ®
Southeast Edition
June 15 2022
$3.00
Vol. XXXIV • No. 12
“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com
Inside
Cat Trial 12: No Hands Features Autonomous Mining Trucks...12
Tennessee DOT photo
Hitachi Hosts Press at Callaway Gardens in Pine Mountain, Ga....20
By Cindy Riley
The Tennessee Department of Transportation (TDOT) is overseeing a project in Rutherford County designed to improve safety on Jefferson Pike Road (S.R. 266). Construction crews are widening roughly 4 mi. of the existing two-lane roadway to four travel lanes from Nissan Drive (S.R. 102) to I-840. The plans also call for an additional center turn lane at intersections. “This is a $61 million dollar project, with $20 million dedicated to roadway/grading, $20 million for bridges and $20 million for utility reloca-
CEG CORRESPONDENT
Carolina Tractor & Equipment Names Matt Nazzaro New COO...24
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Paving Section . . . . . . . . . . . . . . . . . . . . . . . . . .37-55 Auction Section . . . . . . . . . . . . . . . . . . . . . . . . .75-77 Business Calendar . . . . . . . . . . . . . . . . . . . . . . . . . .77 Advertisers Index . . . . . . . . . . . . . . . . . . . . . . . . . . .78
tion/new installation,” said TDOT Operations District Supervisor Clinton Carpenter. “All three components are major undertakings that require a great deal of coordination and planning to accomplish simultaneously.” Carpenter said now is a good time to perform the work. “This community is growing at a rapid pace, and the road that used to be somewhat of a rural route has become a vital artery for the area, especially for truck traffic. It needs to be safer, and it needs to be able to handle the increased volumes that are occurring.” see TDOT page 60
Simplifying Jobsite Safety Recognizing Hazards, Making Straight-Forward Changes Can Significantly Reduce Workzone Accidents, Injuries By Lucy Perry CEG CORRESPONDENT
The top four causes of accidents on the construction site remain falls, strikes from objects, crushes between objects and electrical shock. Too often, though, workplace accidents and injuries can be attributed to the materials being used on the job site. There are easy methods to avoid incidents and keep workers safe on the construction job. see SAFETY page 34
Page 2 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 3
Page 4 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
IN THIS ISSUE
SOUTHEAST EDITION
Circulated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands
To read these stories and many more, visit www.constructionequipmentguide.com
8
32
26
FEATURES
76
WORK BEGINS ON $12M UPGRADES TO ORANGEBURG, S.C., CORRIDOR
In the shadow of a pedestrian bridge that bears his wife’s name, South Carolina Congressman James Clyburn helped break ground in Orangeburg, S.C., for a new project designed for pedestrian safety.
12
CAT TRIAL 12: NO HANDS FEATURES AUTONOMOUS MINING TRUCKS
26
DOBBS HOLDS GOLF CLASSIC TO BENEFIT CONSTRUCTION ANGELS
Front and center is what you’ve seen in mining, and in Cat Trial 12: No Hands you’ll get to see the agility and precision our autonomous mining trucks bring to the table, not unlike what you’d see from a world class soccer player.
More than 140 friends and business partners turned out for Dobbs Equipment’s 2nd Annual Golf Classic, a four-person scramble at the Tiburon Golf Club in Naples, Fla., that raised more than $160,000 for Construction Angels.
16
30
RETAINING WALL DELAYS COMPLETION OF ARK. HIGHWAY EXTENSION
MECALAC NORTH AMERICA EXPANDS SALES, SERVICE TEAMS
A faulty retaining wall has delayed completion of the 5.8-mi.-long extension of the King Expressway, the Arkansas Department of Transportation (ArDOT) announced.
Mecalac, a global designer, manufacturer and distributor of compact construction equipment for urban environments, celebrated five years as an incorporated company in the North American market.
20
32
HITACHI HOSTS PRESS AT CALLAWAY GARDENS IN GEORGIA
GREGORY POOLE EQUIPMENT COMPANY HOSTS OPERATOR CHALLENGE
After bringing together all product lines under one corporate entity and now launching three new excavator models, the staff of Hitachi Construction Machinery Americas Inc. assembled press representatives.
Gregory Poole Equipment Company and the other Caterpillar dealers in the country are on a quest to find the best — the best equipment operator in the world.
22
46
CENTRAL FLORIDA GETS GRANT FOR INITIAL WORK ON RAIL LINE
SAKAI AMERICA INTRODUCES THREE NEWEST HQ HIRES
Central Florida received a federal grant for preliminary engineering activities and environmental approvals needed to construct an intercity, high-speed passenger rail system between Orlando International Airport and Tampa.
Sakai America has three new hires in the Adairsville, Ga., headquarters: Joey Queen as manufacturing engineer; Curtis McCrillis as service manager; and Rosa Bennett as receiving coordinator.
24
46
CAROLINA TRACTOR & EQUIPMENT NAMES NAZZARO NEW COO.
ASPHALT PAVEMENTS ELIGIBLE FOR FEDERAL FUNDING TO REDUCE CARBON
CTE (Carolina Tractor & Equipment Company) announced June 2 that Matt Nazzaro has been promoted to executive vice president and chief operating officer and will oversee the daily management of the company, effective July 1.
The Federal Highway Administration released its Carbon Reduction Program Implementation Guidance, unlocking $6.4 billion in formula funding over five years to help states and localities develop carbon reduction strategies.
25
.52
LIUGONG NORTH AMERICA REVEALS FINANCE PROGRAM
LiuGong North America has announced a new private label program to become a one-stop shop for equipment and financing. The new LiuGong Finance program will serve customers and dealers with a multitude of benefits. Founder Emeritus (1930-2021) Edwin M. McKeon Sr. Southeast Publisher Richard C. McKeon Executive Publisher Teddy McKeon Editor In Chief Craig Mongeau Senior Editor Robby Chakler Editorial Assistant Katherine Petrik Contributing Editor Eric Olson Production Mgr. John Pinkerton Controller Judith Nixon Circulation Mgr. Cathy Printz
www.constructionequipmentguide.com
Florida Coast Equipment is establishing itself as a leader in aftermarket sales and services as it continues to attract world class talent from across the heavy equipment industry, the company announced June 2.
76
JOEY MARTIN HOSTS HUGE CROWD AT MAY AUCTION IN CARROLLTON, GA.
A vast selection of heavy earthmoving, paving, trucking, farming and transportation machines and vehicles required two rings and created some fast-paced auctioning.
DEPARTMENTS 75 77
COMING AUCTIONS BUSINESS CALENDAR
EQUIPMENT 37
CATERPILLAR Large Asphalt Paver Line
38
WIRTGEN SP 62i Slipform Paver
42
DYNAPAC MF2500CS iMIX Feeder
48
TRIMBLE Next Gen Roadworks Paving Control System
52
ASTEC Highway Class Asphalt Paver Controls
Richard C. McKeon
Kent Hogeboom
Rich Olivier
• North & South Carolina • Tennessee • Virginia
National Sales Manager
• Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida
Cell e-mail
Advertising e-mail production@cegltd.com
Mobile
Sustainability is a growing concern for all segments of the economy, including construction and paving companies. Not only because of the environmental impact on the community, but for the economic impact on companies as well.
FLORIDA COAST EQUIPMENT ADDS BERDAN AS PARTS VICE PRESIDENT
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site
HOW SUSTAINABILITY WORKS FOR YOUR CONTRACTING COMPANY
56
YouTube
704/553-8888 704/726-1452 rmckeon@cegltd.com
Cell e-mail
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published biweekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole
315/866-1423 518/221-5159 khogeboom@cegltd.com
Cell e-mail
770/443-3174 404/831-9526 rolivier@cegltd.com
or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 5
JAMES RIVER EQU UIPMENT IS YOUR JJOHN DEERE D DEALER PARTS, SERVICE AND SOLUTIONS
JAMESRIVEREQUIPMENT.COM
Page 6 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 7
On today’s jobsite, precision is power. John n Deere SmartGrade™ Excavaators include a variety of graade-control options to give you y the power of choice. Choose from integrated 2D guidannce all the way up to SmartGrrade™ 3D grade control and hit h grade fa faster. Operators att every level of '&%'$#'"!' # ' ' #! " ! " '" ! #' ' $ ' # ' # #" ! $' $ $ $ ' $' # ' #$ $ '"!' '$ $ " '$ # $ '! ' % $ ' ! #"' " ' # " " " # ' '&# # # " $$ !' $ ' %' !' #" ''$' $ ' " ' '" # " upgrades are easy and ready when you are. Call C or visit us today to learn n more.
Adairsville,, GA..............770.773.9857 Albany, GA ...................229.888.1212 Andrews, SC.................843.221.4940 Atlanta, GA ..................404.691.9445 Aynor, SC .....................843.358.5688
Braselton, GA...............770.965.1889 Brunswickk, GA..............912.264.6161 Columbuss, GA ..............706.687.3344 Cuthbert, GA................229.732.2631 AL ..................334.794.8691 Dothan, A
FlintEquipCo.com m
Grovetown,, GA.............706.855 G 5.5440 Ladson, SC...................843.572 2.0400 Macon, GA...................478.788 8.1586 Savannah, GA...............912.964 4.7370 Simpsonville, SC ...........864.963 3.5835
Troy, y, AL........................334.566.4181 Valdosta, GA ................229.474.6680 Walterboro, SC.............843.539.1420 West Columbia, SC .......803.794.9340
Page 8 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Work Begins On $12M Upgrades to Orangeburg, S.C., Corridor
SCDOT rendering
The corridor enhancements proposed include intersection improvements along US 21/178 Bypass (Chestnut St) at US 601 (Magnolia St), S-106 (Goff Ave) and SC State University entrance.
In the shadow of a pedestrian bridge that bears his wife’s name, South Carolina Congressman James Clyburn helped break ground May 31 in Orangeburg, S.C., for a new project designed to give pedestrians and bicyclists a safe, beautiful corridor within the city, located southeast of Columbia. The South Carolina Department of Transportation (SCDOT) developed the U.S. 178/U.S. 21 Corridor Improvements project by coordinating with the Lower Savannah Council of Governments and Orangeburg County to upgrade pedestrian safety along the roadways and improve pedestrian connectivity. “It’s important for me to be here because this project happens to run adjacent to another highway department project named in honor of my late wife,” said Clyburn, who has served as the U.S. representative for South Carolina’s 6th congressional district since 1993. The nearby 93-ft.-long pedestrian bridge over Chestnut Street was renamed the Dr. Emily England Clyburn Pedestrian Bridge in 2018. Rep. Clyburn is currently the third ranking House Democrat and serves as the party’s Majority Whip “To improve this entire area is something that needs to be done,” he added. “It will change the attitude of the [South Carolina State University] students who come here every day. I know how uplifting it is to me personally to have the ambiance of a place looking right.” The project includes improvements to the U.S. Highway 21/178 Bypass (Chestnut Street) corridor near the entrance
to SCSU, the state’s only public, historically black college and university (HCBU). The Orangeburg Times and Democrat reported that, once completed, the construction will include rehabilitated sidewalks, stamped crosswalks, landscaped and fenced medians, a shared-use path from Goff Avenue to Bellville Road, retrofitted stairs to the SCSU pedestrian overpass and black, powder-coated mast arms and pedestrian equipment at the intersections of U.S. Highway 601, Goff Avenue and Wilkinson Boulevard. Clyburn Secured Construction’s Federal Funding “This project would not move forward without the many partners who worked tirelessly to identify and commit the necessary funding — a total of $12 million — to bring this project to fruition,” SCDOT Deputy Secretary for Engineering Leland Colvin told the Orangeburg news source. But, he said, it was Clyburn who was instrumental in getting funding earmarked for the project from Washington, D.C. “We would not be here without the funding secured at the federal level that accounts for over 80 percent of the total project funding for the improvements on Chestnut Street that we are getting ready to start with,” Colvin noted. “I would also like to thank Orangeburg County and the Lower Savannah Council of Governments for their contributions to complete the funding package.” Just after the groundbreaking, the Orangeburg County
Council presented a check for $1.3 million to the improvement effort, the Times and Democrat reported. “This is a project that is very well needed, and the money has just been sitting there for over 20 years,” Clyburn told the group assembled for the ceremonial beginning of the construction. “It can be used for this purpose, and it fit very neatly into the [SCDOT’s] goals for the entire region. “It started with the pedestrian overpass,” he continued. “I expect by this time next year, the stuff at the Railroad Corner will be up and going. It takes some time to do the planning, but once it breaks, things seem to fall into place.” SCSU Grad Overseeing Corridor Upgrades Alex Bennett, a graduate of SCSU, will serve as the transportation department’s project engineer on the improvement of the U.S. 178/U.S. 21 corridor. He said the project will promote safety for pedestrian and bike traffic and provide a separation between them and the roadway traffic. “It’s a humbling experience, coming back 10 years after graduation and not having any idea I would be serving in this role,” Bennett explained. “It feels good to come back full circle and provide a benefit to the campus, as well as the city and county of Orangeburg.” Construction should begin sometime this summer and be completed in the fourth quarter of 2023, he told the Orangeburg newspaper, a total of about 18 months.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 9
Make e the Grade Fa ast on any a Ter errain W the Lie With ebherr PR 716 7 and PR 726 7 dozers Botth Machines in Stoock!
PR 716
PR 726
• Push more materrial with a 3.60 – 4.07 yd3 bla ade capacity
• Power through big g loads with a 170 HP engin ne
• Maintain traction with automatic speed and to orque adjustment
• Handle slopes witth its hydrostatic propulsion d drive
• Excellent maneuv verability delivered by hydro ostatic transmission
• Simple daily main ntenance with grouped service points
Schedule a Demo Today!!
www.gseqquipment.net
Tampa a 813-247-5168
Orlando 407-859-9160
Talla a hassee 850-5774-0892
Fort Myers 239-334-60663
Ocala 813-247-5168
W When you need us, wherre you need us Equipment • Parts • Service
Jacksonville 904-268-4400
Pompano Beach 9 954-327-8808
Page 10 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 11
Page 12 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Cat Trial 12: No Hands Features Autonomous Mining Trucks You want a job site that’s as safe and productive as possible. At Caterpillar, that means a focus on autonomy. Front and center is what you’ve seen in mining, and in Cat Trial 12: No Hands you’ll get to see the agility and precision our autonomous mining trucks bring to the table, not unlike what you’d see from a world class soccer player. And you’ll get a sneak peek of where this technology is going next. Caterpillar brought in four-time FIFA World Cup participant DaMarcus Beasley to run through a Cat-themed obstacle course, and did the same with a 794AC autonomous mining truck. The inspiration came from Cat Trial 3: China Shop, where a mini excavator navigated through tens of thousands of dollars’ worth of glassware. Cat wanted to show that its big machines could do it too. Cat autonomous equipment was originally introduced at MINExpo 1996, and the 794AC was showcased at MINExpo in 2021. The first autonomous 794 AC electric drive mining trucks were deployed in South America. In Chile, the first of 28 autonomous 794 AC trucks began arriving in May 2021 to be part of Teck Resources Limited’s low-cost, long-life Quebrada Blanca Phase 2 (QB2) copper project. It is the latest autonomous mining truck equipped with Cat MineStar Command for hauling, an autonomous hauling solution. The 794 AC is the first electric drive model to join the expanding Command for autonomous haulage fleet, which includes the Cat 789D, 793D, 793F and 797F models. When you think of services at Caterpillar, the first things that come to mind are related to maintenance and financing. Did you know that automation — more specifically Cat MineStar Automation Solutions — is also a service the manufacturer provides its customers? Autonomy is rapidly emerging in the mining industry as essential for improving safety and productivity and lowering cost. The 794 AC, equipped with Command for hauling, enables total autonomous operations of the mining trucks, interaction with other equipment, and integration with customer mining processes and systems, all managed by MineStar. Cat Trial 12: No Hands shows how autonomy is coming to other industries. The latest video features a semi-autonomous version of the Cat 299D3 compact track loader (CTL). With its vertical lift design, this CTL delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides enhanced traction, flotation, stability and speed to work in a wide range of applica-
Caterpillar brought in four-time FIFA World Cup participant DaMarcus Beasley to run through a Cat-themed obstacle course and did the same with a 794AC autonomous mining truck.
tions and underfoot conditions. A semi-autonomous version of the machine also was previewed for the public and press at Cat Trial 12. Caterpillar has decades of experience with
autonomy — specifically in the mining sector. A 2020 acquisition has helped advance its experience in large mining equipment and start on a path that features new, nimble, miniaturized technology.
Cat Trial 12: No Hands shows how autonomy is coming to other industries. The latest video features a semi-autonomous version of the Cat 299D3 compact track loader (CTL).
So, while not commercially available… yet… the semi-autonomous 299D3 points to the potential Cat Command for Construction has to enhance your job sites. Also featured in Cat Trial 12: No Hands is former Major League Soccer player DaMarcus Beasley. Beasley played for the Chicago Fire and Houston Dynamo in addition to teams in The Netherlands, England, Scotland, Germany, and Mexico. He is the only American man to play in four FIFA World Cups, making 126 appearances during his 16-year international career before retiring in 2019. And he wasn’t just a fantastic player, Beasley is a great ambassador for the “beautiful game.” The course features obstacles made up of officially licensed Cat merchandise including: • Phones — With a modern, rugged design the Cat S62 Pro is protected by a high grade aluminum body, and tough scratchresistant Corning Gorilla Glass 6. • Coolers — This 55 quart cooler is designed for the durable and rigorous needs of your job site. • Lights — CT3610 swing arm lights and CT3541 LED work lights are versatile and can help brighten any job or work area. • Tool bags — The Cat 16-inch Pro Wide Mouth Tool Bag features 18 pockets and an open, uncluttered interior space for maximum holding capacity. • Shovels — The K10-102 D-handle digging shovel with its nearly indestructible handle is “rated strongest in class.” Cat Trial 12: No Hands highlights the teamwork, agility and precision that goes into success for your team and your job site. For more information, visit www.cat.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 13
Page 14 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
W E KEEP WE KEEP AM A MER M RIC A ON O N TRACK T R AC K
Call: 800-365--7260 Visit: morookacarrriers.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 15
ranes, Boom m Trucks an nd More!
View our used inventory at:
used.R RingPower ingPower.com/C Crane rane
N E W & USE D SAL ES • RENTA LS • P A R T S • S E R V I C E • FLORIDA
US SED CRANES WANTED. ALL BRANDS A B CONSIDERED.
904-494-1418 9 9 904-494-1415
ww ww.RingPowerrCrane.com
GEORGIA A
N. Carolina
S. Carolina
St. Augustine (Corp)
P Pompano Beach
TTaamppa/Orlando
Miami (Innt’l Sales)
Union City
Concord
Ladson
904.494.1219
9954.971.9440
407.8855.6195
305.477..8717
770.774.73000
704.795.3636
843.818.1954
Page 16 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GOOD BUYS ON
NEW & USED IRON
2019 KOMATSU PC210LC-11
1900 HRS ONE OWNER UNIT MAIN PIN HYD. THUMB 42" BKT,75% U/C EXCELLENT COND...FULL WARRANTY TILL 12/29/22
$187,500
2000 CAT D6MXL
2008 HITACHI ZX270LC-3
11,922 HRS 60 TO 70% U/C, 48" BUCKET W/ MAIN PIN HYD. THUMB, PATTERN CHANGER OVERALL VERY DRY & TIGHT. V.GOOD COND
CAT CERTIFIED REBUILD. ( WITH DOCUMENTATION) REBUILT IN 2016 HAS 1538 HOURS SINCE REBUILD. U/C 75 TO 80% LIKE NEW COND. COMES W/TOPCON GPS
$99,500
$59,500
SOLD
2017 KOMATSU D39PX-23
1531 HOURS, LIKE NEW CONDITION, 75 & PLUS U/C
$125,000
1996 CAT 330BL
54" BUCKET, 50% U/C, GOOD COND, RUNS EVERY DAY!
$52,500
Guy Roof 2036 Bishop Rd. Greensboro, NC 27406
336-382-9715 cecarolinasinc@aol.com Free Delivery within 200 Miles!
Call Drew for Service & Brian for Parts.
704-233-4242 800-443-7569 Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm
3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com
Retaining Wall Delays Completion of Ark. Highway Extension A faulty retaining wall has delayed completion of the 5.8mi.-long extension of the King Expressway, the Arkansas Department of Transportation (ArDOT) announced. The transportation agency told the Hot Springs SentinelRecord in November that the $80.14 million project connecting the U.S. Highway 70 East interchange to the intersection junction of Arkansas Highway 5 and Ark. 7 was ahead of schedule. McGeorge Contracting in Little Rock was on pace to finish the roadwork before the August 2022 date projected when construction began in late 2019. But an error discovered after the retaining wall was built for the Mill Creek Road bridge has upended that timeline, the newspaper learned, pushing the end of construction into the fall. “The project delay has been in trying to engineer a suitable solution that would not require substantial removal of the asconstructed wall or much of the fill behind it,” ArDOT Public Information Officer Dave Parker said in an email to the Sentinel-Record. He explained that ArDOT’s bridge division sent the maker of the mechanically stabilized earth (MSE) retaining wall incorrect elevations for the top of the wall, making it too short. “The specs the contractor was provided were correct,” Parker said. “The construction plans contained specific retaining wall details the contractor needed to construct the retaining walls. These details consisted of wall location, orientation, length and wall elevations. [But], the top of wall elevations detailed in the construction plans ArDOT provided to the contractor were in error or detailed incorrectly. “This was not caught until the wall panels were erected and the fill was placed behind the walls,” he said. “The walls are provided in panels that are stacked on top of each other with reinforcing strips going back behind the wall.” In his email to the Hot Springs news source, Parker added, “To my knowledge, erosion has not been an issue. It is more of [a problem] of having too steep of a slope behind the wall to be able to maintain the slope and prevent long-term issues.” New Project Cost Still to Be Calculated The Sentinel-Record reported May 18 that change orders have increased the project cost by 7 percent over the $75.15 million contract McGeorge was awarded in November 2019. The updated cost of more than $80 million does not include the MSE wall change order, which ArDOT said has yet to be completed. Garland County contributed to the King Expressway extension project, pledging $30 million from the $54.7 million bond issue voters authorized in a June 2016 special election. The ballot title they endorsed by an almost two-to-one margin reauthorized a 0.625 percent countywide sales tax to secure the debt. Last fall, ArDOT said the two-lane highway through the rugged backcountry east of Hot Springs National Park will cut travel time in half between the city of Hot Springs and Hot Springs Village.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 17
0 PERCENT FOR 36 MONTHS MONTHS*. 0 DOWN. 0 HASSLE.
+
$ 5 0 0 U S D T O W A R D S A P R O T E C T I O N PA C K A G E . *
Unlike the quality annd dependability of Cat® compaact equipment, these savings won’ w t last a lifetime. It’s high tim me you conneect with your locaal Cat dealer for big deals and an unbeatable Protection Package. Good things come to those whho wait.
Serving South Carolina 3151 Charleston Hwy West Columbia, SC 1.844.252.6242
Serving Western North Carolina 900 Statessville Rd Charlottte, NC 1.800.2777.1212
Serving Eastern North Carolina 4807 Beryl Rd Raleigh, NC 1.919.836.4462
*Offer valid from July 1, 2022 thro ough December 31, 2022 on new small (compact track loaders, compact wheeel loaders, micro/mini excavators, skid steer loaders) and new compact (backkhoe loaders, telehandlers, small dozers, small wheel loaders) Cat® machines sold by participating Cat dealers to customers in the USA or Canada. Purchasse and delivery must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all custome ers will qualify. Length of contract is limited. 0% offers may vary by model and dealer. Payments are based on term length. Payments do not include taxes, freight, set-up, deliveryy, document fees, inspections, additional options, or atta achments. The credit of up to $500 USD can only be applied towards the purchase of a qualifying Cat Customer Value Agreement (CVA) or qualifying Equipment Protection Plan (EPP). Amount of the credit cannot excceed the price of qualifying CVA or EPP. CVA must include 1-year preventative maintenance parts kit, TA1 annual inspection, signed CVA contract and Produ uct Link®. Amount of credit towards CV VA A or EPP is the same e for all models. In some areas, EPP might be sold separately from the CVA. Offfer may change without prior notice and cannot be combined with any other offers. o Additional terms and conditions may apply. Contact your Cat dealer for details. ©2022 Caterpillar. All Rights Resserved. CA AT T, CA ATTERPILLAR, LET’S DO THE WORK, their respective logos, “Cate erpillar Corporate Yellow,” the “Power Edge” and Cat “Modern Hex” trade dreess, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Page 18 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CLEVEELAND BROTHER RS USED EQUIPM MENT
2014 CATERPILLAR 328DLCR
2018 CATERPILLAR 330FL
2017 CATERPILLAR 325FLCR
2011 CATERPILLAR D6T
$153,000
$200,000
5,548 HRS ID# UP19596
3,851 HRS ID# UP19595
$184,000
4,149 HRS ID# UP19597
SOLD
$257,250
3062 HRS ID# UP19430
2019 CATERPILLAR D8T
2015 Caterpillar 335FLCR
2012 Caterpillar 390DL
2017 Caterpillar CS66B
$745,000
$410,000
For our FULL IN NVENTORY Y,, please click or call
www.Cleve elandBrothers.ccom/Used | 866-9956-8733
2,604 HRS ID# UP 19602
13,490 HRS ID# UT16949
HRS $235,000 2,777 ID# UP17104
HRS $139,000 974 ID# UP19055
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 19
USED PAR ARTS
THE BEST VAL ALUE AND BEEST SELECTION OF CAT® PA ARTS & CO OMPONENT TS
CLEVELAND BR ROTHERS PROVIDES ALL YOUR Y USED PARTS AND EQUIPMENT NEEDS
D6T & D8T Winches Available
• Good used inspected • Rebuilt • Repaired • All winches are inspected and tested
WWW.CLEVELANDBROTHERS.COM USED PARTS - 1.877.544.3155
Page 20 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hitachi Hosts Press at Callaway Gardens in Georgia
Some of the many Hitachi representatives who made this event a huge success (L-R) included Simon Wilson; Hiroyuki Isobe; Rob Orlowski; “K” Matsumoto; “Yoshi” Yamada; “Tak” Kuwahara; “Yui” Takubo and Sam Shelton (not pictured).
After bringing together all product lines under one corporate entity and now launching three new excavator models, the staff of Hitachi Construction Machinery Americas Inc. was briming with pride and eager to assemble press representatives from across the country at their recent two-day press event on May 18 and 19 at picturesque Callaway Gardens in Pine Mountain, Ga. With the addition of these new models introduced, Hitachi now offers 16 excavator models in the North American marketplace, as well as its 14 wheel loader products and nine mining machines. Also announced during the event was the opening of a new warehouse in Jackson, Ga., which will house a projected $175 million (currently $135 million) in
The press corps were all over the new machines with their cameras and video equipment as Hitachi’s Rob Orlowski (C) provides comprehensive machine walk-around demos of each of the three new excavator models.
parts inventory representing over 100,000 line items. With all of the changes that have been taking place in the last six months, Hitachi has added more than 150 new employees to its staff. Hitachi has always built a reputation on longevity of its machines, as well as its staff. Some engineers within the company have been on board for 45 years. A reputation of progressive engineering, service, teamwork and sustainability has always been the overall benchmark of Hitachi and was emphasized during the event. Additionally, it was repeated that success comes at the dealer level — “the confidence of our customers rests on the back of our dealer network.”
Hitachi showcased new excavators and some of the key staff members behind the launch of the new products at Callaway Gardens in Pine Mountain, Ga.
Plans currently are in the works for a $50 million project for construction of a new North American corporate headquarters. Goals of increases of electrification of future machines for reduction of carbon output and expansions into other countries in the Latin American marketplace also were laid out. According to Rob Orlowski, director-product management and engineering, the goal is to continuously gain and obtain the absolute best people and dealers. “Some have already told me, Rob this is a game changer,” he said. (All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.)
Positioned right near the lake at the Callaway Gardens, these Hitachi machines drew quite a bit of attention from those staying in the adjacent lodge.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 21
563-8 872-4 41112
Bellevue (Dubuque), Iowa sales@jjjscheckel.com
2016 CA AT D11T Rebuild - $1,485,000 , 2019 CA AT 336 Next Geen - $268,000 ,
2018 CA AT M3188F - $218,000 ,
(3)2015 CA ATT MH H3059’s - $348,000 , EA.
2017 CA CAT 972M - $248,000 ,
3,700 Total hours, 1,486 Idle hours, h A ili y Auxiliary Wheeled excavatorr,, 475 totaal hours, Aux A hy hydraulics, d M i l handlers, Material h d 10,500 Hours, high high idle idl hours h . In Process. Zero Z Hourr,, CAT CAT AT certified ifi d PPow wertrain rebuild b ild 9,376 total fraame hours, h 5,117 hours h at idle, dl 4,259 w/ 4 yearr,, 6,000 hr warranty.y U Blade, SSS Ripper pp r,, 100% hydraulics, 2D Grade control. 10’66”” Stick, 54””Bucket, Variable adjustable j boom,, 8’6”” Stick, 60””Hyd g rise cab, 325 HPP,, 35’’ BBoom, 29’ Stick, S ” Hy tilt Ground access high Actual workingg hhours, 6.25 yard GP bucket, Documented Documented history,y, Very clean machine. bucket, k Outriggers, O i P h bl Push blade, d Super S clean machine. Setup for grapple l or magnet. 130,000 lbs. History. N UC. Excellent history. Available Suummer 2022. New 2 histo L utilization machine. hi ry,y, Low ili
2017 CA AT 972M - $2488,000
2015 CA ATT 972M - $238,000 $ ,
2016 CA AT 950M M - $168,000
2015 CA AT 9950M - $168,000
Agg ggrega g te Handler pack p age g , 8,714Total frame hours, 4 6331 Hours H at idl 4 083 0 Actual workkingg hours, 4,631 idle. 4,083 Yard GP bucket, Documented hi history. 6.25 Ya
8,876 Total frame hours, 2,783 Hours H at idle. dl 6,093 Actual workingg hours. 100% New N Radial Tires, b k Documented History. 6.25 Ya Yard GP bucket.
A03057. 5,887 Hours, 2,106 Idle hours, h 3,781 Actual g one tires, 4.5 Ya Yard workingg hours. Matchingg Bridgest b k Original l paint, i , DDocumented history. GPP bucket, O
A03058. 4,940 Hours, 2,229 Idle hours, h 2,711 Actual Yard workingg hours, Matchhingg Bridgestone tires, 4.5 Ya b k Original i Documented GP bucket, O l paint, D history.
2016 CA AT 725C - $2488,000 ,
2018 Volvo A25G - $298,000 ,
2015 CA AT 836K K - $458,000
2007 CA AT 826H 8 - $288,000 ,
g l paint, 1 Year factoryy Warrantyy remaainingg, 8,275 Total T l hours, 9,800 Hours on Compl pllete Dealer D l Rebuild. R b ld Good G d used 7,850 Total frame hours, 3,207 Idle Idl hours, 4,643 4,350 Hours, Excellent radials, Tailggate, Original p ted and pr p esssure tested, 2,937 at idle, onlyy 5,338 hours iin oper p ation. Service compac p tor w/ fullll m maintenance i & service history. Dealer inspec d 3388 ho Actual workingg hours. Good tires, Origin g nal condition, l as they come. E ll ffeet. Clean, as goodd andd clean history since new. Excellent Cl ready to work. E ll feet, Cleaan cab, Tested to OEM specs. Excellent Matching il b hi pairi of 725C trucks avaailable.
((6)2007 ) CA ATT 631G’s - $ Call
4 have 5,800 5 800 hours h each, 2 have 9,000 hours each. Like new drive tires. Meticulouslyy maaintained, Straight & clean, none nicerr.. Avail. A il August 1st.
B POWERTRAIN PLUS REBUILDS
2019 Volvo L260H - $278,000 ,
7,320 Hours, 2,333 Idle dl hhours, 9.5 Ya Yardd GP bbucket, k Ride control, 8775 Radial tires, Dealer maintained, Documented history,y, Super clean.
2011 CA AT 140M VHP - $228,000 ,
Verified 735 tootal hours, 451 Idle Idl hours, h Only ly 284 actual workingg hours. From state DOT,T, Store inside. i id 14’Moldboard, d Mid-mount Mid Scarafier V Ripperr.. Tier 3.
2015 Case IH Steiger g 620 6 Q Quadtrac 2017 Case IH Steig ger 580 Q g Quadtrac 2014 Case IH Steiger S g 580 Q Quadtrac 2016 Joohn Deere 9570RX & S p Pkg$518 000 K-Teec 1228 Scrape S per PkgPkg $598,000 $598,000 K-Teec 1228 Scr Pkg $588,000 $588,000 K-TTeec 12333 Scraper & KK-Teec 1228 Scraper Pkg P $518,000 S raper p Pkgp Pkgg $468,000 ,
3,900 Hrs H on Quadtrac, Q d 100% NNew tracks k . 2012 28 yardd 2,4000 Hours H on the h QQuadtrac d c, Extr E emely ly clean, l Factory 2,4500 Hours H on the h QQuuadtrac, d E emely Extr ly clean l & wellll 4,800 Hrs, H Excelle E llent tracks, k 33 Ya Yardd scraper p r,, Very V y clean. l Eject scraperr.. Extremely clean & weell maintained i d units. warranty,y, New tracks. NEW 2022 28 yard Eject Ej scraperr.. i d maintained. NEW 2022 28 yardd Ej Eject scraperr.. Dealer tested & inspected. 1 owner wellll maintained.
RENT OR
ADES R HOLMES SMOOTH DRUM ROLLERBL
B UY !
NEW! Ready to ship!
9 & Deere Holmes 11F - $28,50 , 0 / 16F - $34,500 2017 John Deere 9520RX 2 Models, 11’or ’ 16’’ cutting i g width. Made in i Iowa. 2412DE Scraper p Pkgg $488,000 ,
i grade d , extreme dduty. For haul h l roadd & siti e 4,475 2006 CA ATT D10T Frame-Off rame Offf Rebuild Construction 475 Hrs H , 24 YYaard scraper p r,, Extremely ly clean l andd wellll. lleveling li , compacting i & sealing li di dirt prior i to rain i event. maintainedd. Dealer f ll hist hhi ory. l testedd & inspectedd w// full - $998,000. , Readyy now w,, Power e train Plus Frame-Off Rebuild R b ld, OEM CAATT Warranty. New UC, U Blade, SS Ripperr,, Pre-emissioons!
visit
c eckel.com JJSch
2015 K-TEC C 1233 - $1448,000 ,
(3)2014 ) XQ300 Generators - $$24,000 , Ea.
36 YYaard capacity p y pul p lll scraperr,, very nicce & clean. l 7 500 HHours, 300 KW, 7,500 W Bothh single i l & 3 Phase Ph po p werr,, Low hour h use. We ha h ve a matching hi g pa pairi available. il bl 50 HP CAT A DDiiessell engine gi , Wea W ther thh & soundd pr p ooff RRear pushh block bl k. Rec R ommended o d d for 4000+ 00 HP Truck. enclosure, Trailer mounted, d Maintained i d by b CA CAT ddealerr..
and watch w our new company viddeo!
The fastest growing w choice for
Large Equipm ment Rental
Delivered Nationwide. We are easy to work with & will not be beaat on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.
WE OWN WHA ATT WE W ADVERTISE!
call: 5663-872-4112 63 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us ffoorr daily updates:
Page 22 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FUEL EFFICIENT PUMPS FOR SALE & RENT
WEE HAVE PUMPS IN STOCKK!
Self-Priming Tr Trash Pump
aflo™ Submersible Hydraulic Tr Trash Pump
Rotary Wellpoint, Wellpoint Se Self lff--Prriming Dewatering Bypass Trash Pumps & Hydraulically-Driven B
Rotoflo R Rot oflo™ Wellpoint Dewatering
Call for f a FREE Project Revie ew: 772-770-0004
Big Pumps with Flows fro om 5-1M GPM
Paull@mwipumps.com
Turn-key & Cost-Effective e Solutions
mwip pumps.com
Fast Response, Expert Se ervice & Repair The Power to Move ve W Wa ater® Since 1926 | mwipumps.com
Tampa-to-Orlando...
Central Florida Gets Grant for Initial Work On Rail Line Central Florida has received a federal grant to support the preliminary engineering activities and environmental approvals needed to construct an intercity, high-speed passenger rail system between Orlando International Airport and Tampa. The bipartisan announcement was made June 1 by five of the state’s U.S. House members: Reps. Darren Soto, Dan Webster, Stephanie Murphy, Gus Bilirakis and Val Demings. The award of up to $15.8 million came from the U.S. Department of Transportation’s (USDOT) Consolidated Rail Infrastructure and Safety Improvements (CRISI) Grant Program. It will go toward Central Florida’s Sunshine Corridor and Brightline’s proposed Tampa to Orlando passenger rail project. Brightline, the privately run high-speed rail service, will match the funds from the federal grant to create a total investment in the pre-construction phase of $31.75 million.
The CRISI grant application received substantial community and bipartisan support, Brightline noted in its June 1 news release. The country’s only provider of modern, eco-friendly intercity passenger rail travel, the passenger train service is currently running between Miami and West Palm Beach. At the same time, Brightline is building an extension from West Palm Beach to Orlando, which is expected to be finished at the end of this year and carry passengers in 2023. An extension to Tampa is the next step in connecting 70 percent of the state’s population by its rail service, company officials said in the news release. The project’s pre-construction efforts will include 15 percent and 30 percent design completion for the Orlando to Tampa route, which includes working within existing travel corridors and the Interstate 4 median, Brightline noted. see RAIL page 72
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 23
Page 24 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CTE Promotes Nazzaro...
Carolina Tractor & Equipment Names Nazzaro New COO
T he FA E P T L I N E i s the ideal mul ching e quipment for your fore s tr y management ne e d s . Av ailab l e in 3 s ize s : P T-1 75 w ith C AT 17 3 HP engine, P T-3 0 0 w ith C AT 3 02 HP H engine and P T- 475 w ith C AT 475 HP engine .
(770) 407 2014 - inffo@faeusa.com
JACKSONVILLE LOCATION 103 BRYAN STREET JACKSONVILLE, FL 32202 904-354-5746 • FAX: 904-355-1891
fa e -gr gr o up .c com
POLK CITY LOCATION 600 N. COMMONWEALTH AVE. POLK CITY, FL 33868 863-984-6262 • FAX: 863-984-6363
EVOLUTION SERIES Dual Pressure Model 185 CFM @ 100 PSI or 150 CFM @ 150 PSI Electronic Inlet Valve No Regulators Adjust Pressure From Control Panel
FINANCING AVAILABLE ZERO INTEREST 12 MONTHS RENTALS, SALES, SERVICE, PARTS, COMPRESSORS, GENERATORS, LIGHT TOWERS, ABRASIVE BLASTING EQUIPMENT, DUST COLLECTORS, AIR DRYERS, DEHUMIDIFIERS, MANLIFTS
CTE (Carolina Tractor & Equipment Company) announced June 2 that Matt Nazzaro has been promoted to executive vice president and chief operating officer and will oversee the daily management of the company, effective July 1.
CTE (Carolina Tractor & Equipment Company) announced June 2 that Matt Nazzaro has been promoted to executive vice president and chief operating officer and will oversee the daily management of the company, effective July 1. Ed Weisiger Jr., the family-owned company’s third generation of leadership, will remain serving as chief executive officer and chair of CTE’s board. “Matt [Nazzaro] has been deeply involved with setting and executing our strategy, helping us achieve significant growth and operating results,” said Weisiger. “Most importantly, Matt is a steward of our culture and values, and I am confident his talents will position us for another 95 years of success.” Nazzaro joined CTE in 2016 as vice president and chief financial officer after holding leadership roles at GE Capital for eight years. Nazzaro has an MBA in finance, strategy and entrepreneurship from the University of Chicago Booth School of Business and a bachelor’s degree in business administration from the Questrom School of Business at Boston University. see NAZZARO page 56
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 25
Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15
Made in the USA
The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring
STOP the never ending cycle of cylinder repairs.
SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:
Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062
1-800-683-5189 Fax: 770-509-5832
Visit
www.sealsaver.com
for more information or contact us at 1-800-683-5189
LiuGong Reveals Finance Program LiuGong North America has announced a new private label program to become a one-stop shop for equipment and financing. The new LiuGong Finance program will serve customers and dealers with a multitude of benefits. “As we continue to help support, grow and develop our customers and dealer network, we’re delighted to introduce LiuGong Finance,” said LiuGong North America President Andrew Ryan. “We’ve built the LiuGong Finance program to include several components that will benefit our customer and dealer network and their businesses.” LiuGong Finance will provide dealers with finance support for both LiuGong North America and non-competing products. Additionally, it will enable dealers to utilize competitive rates and flexible finance structures under a captive finance program. This helps to create a customer loyalty that can lead to future sales. Dealers and end users will have access to a dedicated finance team. LiuGong Finance offers both retail financing and dealerowned rental fleet financing under the program. There are three types of retail financing included: FMV lease, equipment loan and custom structures. There are two types of dealer-owned rental fleet financing offered: rental equipment loan and custom structures. For more information, visit www.liugongna.com.
Page 26 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Second Annual Golf Classic...
Dobbs Raises Funds for Construction Angels With Golf Classic More than 140 friends and business partners turned out for Dobbs Equipment’s 2nd Annual Golf Classic, a four-person scramble at the Tiburon Golf Club in Naples, Fla., that raised more than $160,000 for Construction Angels. A pre-golf reception was held May 5, followed by the golf classic on May 6. Games on the course included a putting contest for 50/50 winnings; ‘Beat the Pro’ for a chance to win fun prizes; and 1st, 2nd and 3rd Place Dobbs equipment prizes. About Construction Angels Construction Angels Inc. is a 501 (c)3 Non-Profit Corporation that aids families in need of financial assistance and supportive services to the surviving family members when a construction employee has lost his / her life in an onthe-job accident. CA is an organization focusing on the construction workers and their spouses and children left behind. Its services are designed to provide an integrated approach to create quality of life for family members whose household has had the misfortune to be involved in a tragic and fatal accident. In addiDobbs Equipment photo tion, the organization provides a conduit to preventative safe- (L-R): Adam Tschetter and Edward Dobbs, both of Dobbs Equipment; Kristi Gibbs of Construction Angels; and ty and training information along with other household Augusto Salles, also of Dobbs Equipment, are all smiles at the check presentation. Financial Planning and family members counseling services.
2022 Hole Sponsors • Nichols Fleet Equipment • ACME Barricades • John Deere Financial • Dobbs Equipment • Structural Technologies • Lee Boy • Precision Construction Solutions • South Florida Excavation • Hypower, Inc • Bedrock Resources • Stanley Infrastructure • TOPCON • DHG • Jon M Hall Company • MJC Land Development • South Florida Excavation • ACME Barricades • Rite Way Auto Transport • Pinnacle Financial Partners • Truist • JP Morgan Chase • Central Civil Silent Auction Sponsors: • Dobbs Equipment • Linda Brown Events • Pratt Frames
Dobbs Equipment photo
The four-person scramble was held at the Tiburon Golf Club in Naples, Fla.
Dobbs Equipment photo
Cougar Companies, Fort Myers, Fla., was the winning team at Dobbs Equipment’s 2nd Annual Golf Classic. (L-R) are Kristi Gibbs, Construction Angels CEO; Trey Petters, Ron Schmitt, Brandon Schmitt and Adam Tschetter, all of Dobbs Equipment; and Andrew Schmitt.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 27
MADE FOR R
AMERICA A SERVICE THAT’S T
LOCAL SCHEDULE E A DEMO
TODAY
WITH A LOCAL DEALER R
sanyamerica.com m
Award Winning
SW405K
Page 28 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
TAK AKING CONSTRUCCTION
TO THHE NEXT LEVEL. L 2.7M square feet of exhibitss / 130,000 attendees / 1,800 exhiibitors / 150 education sessions
MARCH 14-18 / 2023 / LAS VEGAS / NEVVAADA
No matter what sector of construction you’re in, you’ll leave CONEXPO-CON//A AGG with new ideas, new relationships, and new opportunities to grow your business, and your place within the industryy.. yo This isn’t just North America’s largest construction trade show w,, it’’ss taking construction to the ne ex xt le evvel.
LEARN MORE AT CONEXPOCONAGG.COM
2020 Attenddeee Missy ssy Sc Scherber e ber,, T. Scherberr Demolition & Excavatingg T.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 29
YUP AD CEG-0 /22 - LIFTING FORCE - Photo credits: Sémaphore - No binding document
IT’S AN EXCAVATOR… AND A WHOLE LOT MORE!
MAKE YOUR MOVE TO MECALAC WWW.MECALAC.COM
Virginia 410-242-6500 www.mcclung-logan.com
Greater Chattanooga, Tennessee 423-541-5900 www.kubotaofchattanooga.com
Georgia 800-875-5659 www.reynoldswarren.com
Florida 813-341-4646 www.cpequipment.com
Page 30 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Mecalac North America Expands Sales, Service Teams
Mecalac North America’s sales and service teams continue to grow as the company celebrates five years in the United States and Canada. Team members pictured include (L-R) Gina Mazzotta, Vincent Talotta, Peter Bigwood, Adrien Thomas, Sarah Brixi, Greg Bouvier, Geoffrey Andrews and Mike Shireman.
Mecalac, a global designer, manufacturer and distributor of compact construction equipment for urban environments, celebrated five years as an incorporated company in the North American market. To support its rapidly growing dealer network and increased demand for the company’s compact and rail excavators, loaders, backhoe loaders and site dumpers, Mecalac North America has expanded its sales and service teams and is actively recruiting additional team members. “North America has been very receptive to Mecalac and recognizes the value our products bring to the market,” said Peter Bigwood, general manager of Mecalac North America. “As more dealers come on board and more machines are operating throughout the U.S. and Canada, it’s critical to continue delivering a high level of service and support. Now is the right time to expand our North American team.” As part of this growth, Manuel “Manny” Mendez has joined the sales team, bringing experience with major equipment brands, including Merlo and Manitou. Mendez started his career as a material handling specialist at Linder Industrial Machinery Company of Plant City, Fla. His next career move took him to Briggs Equipment as a territory manager in Miami for Hyster/Yale and Manitou telehandlers. Then he worked as a regional sales manag-
er/dealer development manager of Magni telescopic handlers. He most recently served as a sales manager for Applied Machinery Sales, which supplies and services Merlo telescopic handlers to the United States. As Mecalac North America’s longestserving employee, Geoffrey Andrews’ role on the sales team is expanding. Along with
Joseph Tellier has joined Mecalac North America as a field service engineer. His role is to provide on-site technical training and ongoing troubleshooting assistance for Mecalac’s dealer network.
continuing to serve as regional sales manager for Canada, he will work with dealers throughout North America, providing sales training, product training and equipment demonstrations. Andrews, who has been trained by Mecalac’s top operators, will be the company’s first equipment demonstration operator dedicated to North America. Mecalac North America also has added two new field service engineers, Joseph Tellier and Vincent Talotta. Their role is to provide on-site technical training and ongoing troubleshooting assistance for Mecalac’s dealer network. Tellier has extensive experience maintaining and repairing a variety of equipment. He spent 11 years in the United States Army Reserve, where he held several roles, including heavy mobile equipment repairer and electronics technician. In 2011, he was deployed to Kandahar Air Field in Afghanistan where he was squad leader, wheeled vehicle mechanic and recovery vehicle operator. He also served as motor sergeant in Kuwait. Following his military service, he joined Herc Rentals where he started as a construction equipment service technician and worked his way up to Massachusetts service manager. Talotta joins Mecalac North America after working in Mecalac’s manufacturing facility in France. He has worked as a mechanic and has held positions focused on
Manuel “Manny” Mendez has joined Mecalac North America’s sales team to help support the company’s growth in the United States and Canada.
providing technical support and training. Mendez, Andrews and Talotta are all bilingual. When needed, Mendez can provide assistance in Spanish while Andrews and Talotta can provide assistance in French. “We’re thrilled with the team we’ve built in North America and continue to look for talented professionals who believe in the Mecalac method,” Bigwood said. “The North American market has been very welcoming to us, and we’re prepared to offer all the support our dealers and customers need to be successful.” (All photos courtesy of Mecalac.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 31
S Jaw Set =
MARIAL PROCESSORS ONE AACHMENT
FOR MULTIPLE APPLICATIONS!
G Jaw Set
< =
> ? On-site versatility is optimized by the availability of 3 interchangeable jaw sets.
K Jaw Set
• Cost Effective • Superior Results • Full 360° Hydraulic Rotation • Equipped with NPK’s Exclusive Integral Hydraulic Intensifier System
=
PLEASE CONTACT YOUR LOCAL DEALER:
allroadsequipment.com
flintequipco.com
VIRGINIA Bealeton: 540 439-0668 Chesapeake: 540-485-2100 Chester: 804-748-6411 Fishersville: 540-887-8291 Salem: 540-380-2090
ALABAMA Dothan: 334-794-8691 Troy: 334-566-4181
GEORGIA dobbsequipment.com
FLORIDA
beardequipment.com
ALABAMA Mobile: 800-848-8563
FLORIDA Freeport: 850-835-3337 Jacksonville: 904-296-5000 Lake City: 386-752-9544 Ocala: 352-732-4646 Palatka: 386-325-6268 Panama City: 850-769-4844 Pensacola: 850-476-0277 Perry: 850-584-9200 Tallahassee: 850-575-5600
Fort Myers: 239-334-3627 Lutz (New Tampa): 813-995-0841 Miami: 305-592-5740 Orlando: 407-299-1212 West Palm Beach: 561-848-6618 PARTS ONLY: Pompano Beach: 954-977-9541 Riverview: 813-621-4902 Sarasota: 941-960-2004
Adairsville: 770-773-9857 Albany: 229-888-1212 Atlanta: 404-691-9445 Braselton: 770-965-1889 Brunswick: 912-264-6161 Columbus: 706-687-3344 Cuthbert: 229-732-2631 Grovetown: 706-855-5440 Macon: 478-788-1586 Savannah: 912-964-7370 Valdosta: 229-474-6680
jamesriverequipment.com
striblingequipment.com
NORTH CAROLINA
ARKANSAS
Ahoskie: 252-332-5550 Asheville: 828-667-0176 Charlotte: 704-597-0211 Elizabeth City: 252-679-7590 Fayetteville: 910-424-1200 Greensboro: 336-668-2762 Greenville: 252-758-4403 Monroe: 704-220-2575 Mt. Gilead: 910-439-5653 New Bern: 252-638-5838 Raleigh: 919-772-2121 Statesville: 704-872-6411 Wilkesboro: 336-973-8201 Wilmington: 910-675-9211
SOUTH CAROLINA Rock Hill: 803-325-1555
SOUTH CAROLINA Andrews: 843-221-4940 Aynor: 843-358-5688 Ladson: 843-572-0400 Simpsonville: 864-963-5835 Walterboro: 843-539-1420 West Columbia: 803-794-9340
MISSISSIPPI
Tractor and Equipment
Biloxi: 228-396-2300 Brookhaven: 601-835-4400 Columbus: 662-328-0820 Hattiesburg: 601-544-3000 Jackson: 601-939-1000 Meridian: 601-482-5575 Natchez: 601-442-3613 Philadelphia: 601-656-1997 Tupelo: 662-844-3212 Winona: 662-453-7556
warriortractor.com
ALABAMA Graysville: 205-675-9045 Madison: 256-233-1914 Monroeville: 251-575-7111 Montgomery: 334-277-7260 Northport: 205-339-0300 Oxford: 256-831-0921 Pelham: 205-988-4474
TENNESSEE
meadetractor.com
TENNESSEE
Chattanooga: 423-855-0633 Kingsport: 423-349-5001 Knoxville: 865-546-3207 Nashville: 615-501-8600
Arkadelphia: 870-246-8678 Camden: 870-574-0290 Fort Smith: 479-646-838 Jonesboro: 870-268-9900 Little Rock: 501-455-2540 Monticello: 870-367-3496 Springdale: 479-756-9779 Texarkana: 870-772-9321
Jackson: 731-422-2542 Memphis: 901-345-5294
! " # $" ! % $ & ! "' $ % $ " " ! " $ "' % ! " $ "' ( ! $ ) * $
" " ' " $ "'
;
: ; +,,-
. /
0 112134,,12 .
511-6 7874+9--
Page 32 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Gregory Poole Equipment Company Hosts Operator Challenge
CEG photo
In the “Mini Master” segment of the operator challenge, the contestant navigates the course and moves tires using a grapple mounted on a Cat 304 excavator.
CEG photo
Gregory Poole Equipment Company and the other Caterpillar dealers in the country are on a quest to find the best — the best equipment operator in the world.
CEG photo
A contestant was navigating the “Stay on Track” segment in a Cat D3 dozer.
G
regory Poole Equipment Company and the other Caterpillar dealers in the country are on a quest to find the best — the best equipment operator in the
world. The local winner, Ben Sandy with Sandy’s Hauling & Backhoe Service Inc. in Roseboro, N.C., showed off his agility, speed and accuracy in a series of skills-based tests. With a time of 9:32, Sandy will move on to the regional finals and from there to the Global Operator Challenge finals at ConExpo-Con/AGG 2023 in Las Vegas, where Caterpillar will crown one operator world champion. Sandy also won in 2019, when he participated Gregory Poole’s first ever Global Operator Challenge. CEG CEG photo
In “the Big Dig” the contestant had to dig a 25-ft.-long ditch while maintaining a 4-ft. depth within a tolerance of 2/10ths of an inch. The Cat 323 excavator was equipped with Cat Grade Control that helps operators reach grade faster.
CEG photo
(L-R) are Phillip Walton, Mike Dawson and Leonard Lupton, all of Balfour Beatty, and Brad Rinderer of Gregory Poole.
CEG photo Gregory Poole Equipment Company photo
CEG photo
Big winner Ben Sandy will move on to the regional finals and from there to the Global Operator Challenge finals at ConExpo-Con/AGG 2023.
Brian Metcalf (L) of Gregory Poole and James Collopy of Providence Construction in Clayton, N.C.
CEG photo
This portion of the “Stay on Track” segment required the use of a Cat 259D3 compact track loader.
Contestant Trish Harrell of Martin Marietta’s Fountain Quarry in Farmville, N.C., and Bryant Balentine of Gregory Poole.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 33
Page 34 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Accidents Can Happen Fast … Think First, Not Last SAFETY from page 1
OSHA safety standards spell out the exact process for preventing injuries to crew members. There are many causes for these incidents, but Grant Law Office points to negligence as chief among them. Lack of proper worker training contributes to that negligence. The law team said improper use of or malfunctioning tools and equipment; failure to properly secure tools or components and improper stacking of tools, equipment, supplies or materials contribute, as well. Inadequately securing loads on a boom, hoist or crane; loads that are too heavy; failure to use safety devices designed to stop falling debris and objects; faulty parts or materials that break down or lead to structural collapse; and lack of posted warning signs can all be tied to accidents.
Lack of proper training contributes to the potential for injury.
Exponentially Improving Conditions Legal experts say recognizing hazards and making simple changes in work processes as a result can improve conditions exponentially. “For instance, the seemingly common-sense requirement to bolt new steel instead of welding it in pre-existing wood structures can significantly reduce the risk of costly and dangerous fires,” attorney Neill Flynn, The Plata Law Firm, told Structure magazine. “Whether made of steel, lead, cast iron or copper, pipes are invariably denser, heavier and capable of making short work of the human body. “Required safety precautions, most notably hard hats, have significantly reduced the number of injuries caused by construction workers coming into unintended contact with metal pipes.” Unfortunately, these materials are still the source of a “significant” percentage of workplace accidents, he noted. So do incidents related to working around pipes. Due to their weight and “unyielding nature,” Flynn said pipes are inherently dangerous whether they fall on an unsuspecting worker or cause an impact injury from improper storage. “Something as simple as an unevenly stacked rebar can easily cut a worker or cause one to trip and fall,” he said. “Given the nature of construction sites, where almost everything is sharp, hard and/or heavy, what might otherwise be a benign occurrence can quickly become a career or an even life-ending event.” Electrical wiring and other dangerous materials such as conduit and fixtures, invariably found on construction sites, can be hazards. The most obvious source of injury from such materials is the risk of electrical shock, said Flynn. He added while it’s most closely associated with injuries to electricians, a significant number of electrical injuries are sustained by construction workers in every trade. Wiring by its very nature creates a high risk of trip and fall injuries stemming from entanglements in loosely or otherwise improperly stored materials, he said. Flammable materials pose an inherent Burn injuries to the feet can result from splashing molten metal, chemical spills, contact with fire and flammable or explosive see SAFETY page 54
materials.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 35
USED EQUIPMENT
(815) 385-7700
sales@millerformless.com • www.millerformless.com
RELY ON A MILLER TO GET THE JOB DONE
1805 DOT STREET • MCHENRY, IL 60050
Looking for an edge over the competition? We have EXACTLY what you need!
USED M-1000
POR
POR
1999 USED M-8100
POR
POR
2000 USED M-8800
POR
Low hour machines, trimmer, 2-speed, ready for work! Several Available!
2022 CG-200
POR
NEW curb machine. Powered by Kubota, various curb profiles, Available in June and July
2022 M-6040
2022 M-1000
POR 2022 M-8800
AVAILABLE NOW! 8’ to 16’ variable width paver, barrier walls
POR
NEW machine. 4-track curb machine, various curb profiles, trimmer, 2 speed, Stringless ready
POR 2022 WB-3200
NEW machine. Large Barrier walls, concrete paving, Stringless ready
2022 M-8100
NEW machine. Barrier walls, concrete paving, various curb profiles, Stringless ready
NEW machine. Available in July, work bridge, texture cure
POR 2022 M-2530
NEW machine. 3-track curb machine, various curb profiles
1,200 hours, set up for paving, ready to work!
great running machine, low hours, just came off project ready for work
Page 36 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SECTION
Paving Pages 37-55
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
Caterpillar Provides Updates to Large Asphalt Paver Line Caterpillar Inc. announced updates to the large asphalt paver line. The new Cat AP600, AP655, AP1000 and AP1055 asphalt pavers build upon the performance of the F-series pavers that brought fuel efficiency, simplified operation and more comfort. With new screed offerings, technology that assists with paver setup, better material retention and enhanced visibility with standard opposite side mirrors, these new models continue to evolve into machines that offer contractors a high return on investment, according to the manufacturer. Front-Extender Screed Additions The new Cat SE47 FM and SE60 FM screeds utilize extenders located in front of the main screed. These front-mounted extenders are extremely stable for wider width
paving and make it easy to quickly reduce paving widths when maneuvering around obstacles by easily drawing material back into the auger chamber. The SE47 FM offers a paving range of 8ft. to 20-ft. 6-in., while the SE60 FM provides a 10-ft. to 25-ft. 6.-in paving range. Optional extension packages as well as berm attachments enable these screeds to perform exceptionally well in a variety of applications in both urban and rural settings.
screed including paving width, paving speed, and tow-point position to name a few. When moving to a similar job site, the operator simply activates a previously recorded profile from the display menu, and the system conveniently matches machine setup specifications for proven, reliable performance. This option is available on the SE50 V, SE50 VT, SE60 V, SE60 V XW and SE60 VT XW screeds.
Simple Setup, Repeatable Performance Pave start assistant is an optional machine management tool that simplifies setup for repeatable performance on job sites with similar paving requirements. The integrated system records the functioning conditions of both the paver and
Material Monitoring Monitoring asphalt in the hopper is a vital function for keeping the paving train running smoothly. However, at times it can be a difficult task. Too much material results in spillage, while too little material starves the feed system. Too simplify this function, an optional The new Cat AP600, AP655, AP1000 and AP1055 asphalt pavers build upon the performance of the F-series pavers.
sensor has been added for material height with an indicator located on the operating display that enables the operator to quickly determine when to continue paving or when to call for more material. In combination with the height sensor is an optional temperature sensor that keeps the operator informed of the asphalt temperatures being delivered to the paver for a convenient quality control process check. Thermal Mapping Thermal segregation is one of the leading causes of road failure in the asphalt paving industry. Thermal variations can leave uneven surface textures behind the screed. These variations cool more quickly and can lead to less-than-ideal compaction results and shorter life expectancy of the paved surface. Early detection of thermal variation enables timely process control adjustments to be made. To combat these variations, contractors can monitor asphalt surface temperatures utilizing the optional Cat infrared camera and a Global Navigation Satellite System (GNSS) enabled by RTK accuracy. Viewing real-time temperatures, contractors can identify variations and take action to manage the plant-to-paver delivery process and fine-tune paving practices for more uniform lay-down temperatures. Enhanced Material Retention Paver and truck exchanges provide an opportunity for asphalt spills and leaks. A new flashing design on the front of the hopper offers increased memory and temperature resiliency that helps provide better spill prevention. In addition, scrapers located on the backside of the hopper help prevent leaks between the hopper wings and engine compartment. New Styling New trade dress provides a distinguished appearance that helps keep the machine fleet looking modern and up to date. The letter designation also has been removed and will follow serial number recognition for parts and service support. For more information, visit cat.com.
Page 38 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Concrete Paving With Wirtgen SP 62i at Keflavik Air Base A Wirtgen slipform paver constructed 89,700 sq. yds. of operational facilities by concrete paving an extension of the apron and a hazardous cargo pad at the military air base on the international airport at the port of Keflavik, about 31 mi. from Iceland’s capital, Reykjavik. As the overall project was commissioned by the U.S. government, all measurements used during the paving project were in imperial units. At the end of the construction project the SP 62i had paved a total of 45,778 cu. yd. of single-layer concrete paving with a width of 25 ft. and a thickness of between 16 and 18 in. On average, 1,177 cu. yds. of concrete were paved every day. Highest Quality, Despite Challenging Deadline Due to the climatic conditions on the Reykjanesskagi peninsula in the south west of Iceland, the time window for the project was set for the beginning of July to the end of September of the year. To squeeze the work into this timeframe, the decision was made to do without prior placement of fixed formwork for the individual strips. Despite the tight deadline, the paving team was able to deliver highest quality results, not least due to machine technology like the high-precision steering and leveling system and the automatic super smoother. Precise Edges Essential for Optimal Surface Water Drainage Operational areas on airfields generally have only a very slight cross-slope and, in Keflavik, the specified value was 1 percent. The area was paved in 31 separate strips that were connected to one another by tie bars inserted along the sides to ensure the correct height of the individual sections. The outer edges of the strips posed a particular challenge for paving with the slipform
At Keflavik Air Base, the Wirtgen SP 62i delivered precise single-layer concrete paving with a width of 25 ft. and a thickness of between 16 and 18 in.
method. They had to be precisely perpendicular from end to end and faultlessly paved with absolutely no fall. Only this can ensure that rainwater drains away as it should during future operations, and that no water collects in the expansion joints. Wirtgen Application Engineers Provide Assistance Essentially, concrete is always a mixture of cement, water and variously sized aggregates. However, in order to fulfill the future load-bearing and wear-resistance properties of the construction in question, further additives and a more precise consideration of the above-mentioned main ingredients was needed. The required properties in the case of the extension work at Keflavik Air Base included, for example, a concrete with the compressive strength class C35/45. In order to achieve the desired compressive strength of
“Teamwork is an essential factor when it comes to assuring our success. And that is why we truly appreciate the value our long-established partnership with the Wirtgen Group. Product management, application engineers, and service teams on the construction site work hand-in-hand with us, always with a single goal in mind: finding the right solutions to ensure the success of our project,” said Matthias Neumann, CEO, HIB Infra GmbH & Co. KG.
45 N/mm² (cubic concrete specimen), the ideal formula for the concrete mix was determined with the assistance of Wirtgen application engineers and optimized for paving with the slipform paver. In situ paving of the first pilot strips was able to begin immediately without trial areas. These showed optimum quality in all specified parameters such as density, compressive strength, profile-compliant placement and surface roughness, i.e. grip characteristics. Maximum Evenness Over Entire Operational Area When it comes to the operational areas of airfields and airports, demands for surface evenness are generally very high. At Keflavik Air Base, the specified maximum permissible unevenness was .15 in. on 13 ft. In reality, the evenness measured according to TP Eben 2007* showed that deviations were significantly lower and that the even-
The extension of the parking apron is realized in the form of 31 separate strips connected to one another by tie bars inserted along their sides.
ness achieved was far better than the target value. * Technical testing regulations for evenness measurements on road surfaces in longitudinal and transverse directions. A clear sign of the quality that can be achieved only with a perfectly coordinated team and the right equipment, as Hendrik Wendt, Site Manager & Concrete Technologist, HIB Infra GmbH & Co. KG subsequently explained: “On this project, we once again enjoyed the excellent experience of working together with the team from Wirtgen. “The team provided excellent advice and valuable support in both the planning phase and as on-site consultants. Not least thanks to this, we were able to complete the project on time with as good as no problems at all on the construction site.” Facts, Figures: Extension Project at Keflavik Air Base Project Dimensions • Parking apron length: 918 ft.; • Parking apron width: 771 ft.; • Hazardous cargo pad length: 394 ft.; • Hazardous cargo pad width: 249 ft. Paving Data • Specified cross-slope: ≤ 1 percent; • Paving width: 25 ft.; • Paving thickness: 16 to 18 in.; • Daily paving performance: 1,177 cu. yds.; • Overall paved surface area: approximately 89,700 sq. yds. General • Construction contractor: HIB Iceland Ehf; • Project timeframe: 07–09/202;1 • Wirtgen machines deployed: SP 62i. For more information, visit www.wirtgengroup.com.
The concrete was placed in front of the SP 62i slipform paver by an excavator and then evenly distributed with the machine’s spreader plow.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 39
BUILT TO CONNECT
Efficiency and Productivity Designed with safety and operator comfort in mind, the Shuttle Buggy® 3000 material transfer vehicle features adaptive cruise control, bright LED lighting, four-wheel steering for easy transport and ground-level maintenance access for added convenience. Operators can rely on clear sightlines and the ground operator is safely protected inside the structure of the machine. The Roadtec SB-3000 is the perfect blend of traditional craftsmanship and modern technology.
astecindustries.com
www.altaequipment.com
www.Cowin.com
www.hillsmachinery.com
539 SW Arrowhead Terrace Lake City, FL 32024 (386) 758-7444
9601 Boggy Creek Road Orlando, FL 32824 (407) 850-9614
1014 Atlas Way Columbia SC 29209 (803) 658-0200
11717 Reames Rd Charlotte NC 28269 (704) 208-5564
1501 Hedingham Blvd Raleigh NC 27604 (919) 746-7938
2238 Pinson Valley Parkway Birmingham, AL 35217 (205) 841-6666
15101 AL-20, Madison, AL 35756 (256) 536-9390
8750 Philips Hwy Jacksonville, FL 32256 (904) 737-6000
5151 Martin Luther King Blvd. Fort Myers, FL 33905 (239) 481-8554
7168B Cross County Road North Charleston SC 29418 (843) 225-9377
5475 Old Haywood Rd Mills River NC 28759 (828) 820-5265
415 Belvoir Highway Greenville NC 27834 (252) 752-7145
35 Schillinger Road, North Mobile, AL 36608 (251) 633-4020
1501 Highway 78 East Oxford, AL 36203 (256) 832-5053
8418 Palm River Road Tampa, FL 33619 (813) 630-0077
5210 Reese Road Davie, FL 33314 (954) 581-4744
11 Dixie Circle Greenville SC 29605 (864) 546-5208
2901 Manufacturers Rd Greensboro NC 27406 (336) 308-3045
80 Gregory Rd Leland (Wilmington) NC 28451 (910) 800-2070
4325 Northern Blvd. Montgomery, AL 36110 (334) 262-6642
7950 Pittman Avenue Pensacola, FL 32534 (850) 479-3004
1800 Culver Road Tuscaloosa, AL 35401 (205) 848-4147
Page 40 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Products shown with optional equipment.
MAULDIN Paving g Products... MASTERS S OF THE MA AT T! Contact your MAULDIN N dealership today to see the newly redesigned 1860 Commercial Paver For more information visit us at www.4aMauldin.com.
Richmond Machinery & Equipment Company
Hills Machinery www.hillsmachinery.com
www.richmondmachinery.com
NORTH CAROLINA 2901 Manufacturers Rd. Greensboro, NC 27406 (336) 308-3045 (888) 436-5088
415 Belvoir Hwy. Greenville, NC 27834 (252) 752-7145
1501 Hedingham Blvd. Raleigh, NC 27604 (919) 746-7938
11717 Reames Road Charlotte, NC 28269 (704) 208-5564
SOUTH CAROLINA 1014 Atlas Way Columbia, SC 29209 (803) 658-0200
7168B Cross County Road North Charleston, SC 29418 (843) 225-9377
11 Dixie Circle Greenville, SC 29605 (864) 546-5208
5481 Old Haywood Rd. Mills River, NC 28759 (828) 820-5265
1701 Roseneath Road Richmond, VA 23230 (804) 359-4048
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 41
MECO PALM BEACH 1449 Jupiter Park Drive Suite 22 Jupiter, FL (561) 877-0513
Page 42 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
(844) 4 MY DOBBS www.dobbsequipment.com
The heart of the IMIX-system is the combination of three strategically positioned devices: a conical auger in the hopper, a flow divider in the conveyor and a mixing system at the end of the main conveyor.
Redefining Traditional MTV Technology With Dynapac MF2500CS iMIX Feeder Dynapac showcased its iMIX technology enabled MF2500CS feeder at the World of Asphalt tradeshow. The IMIX system made its debut on Dynapac’s MF2500CS mobile feeder, featuring a versatile belt system, intelligent operator assistance systems and flexibility to configure the machine for the right application.
and when to leave. The dashboard of the MF2500CS features a large 7-in. screen that displays vital feeder parameters. Three cameras that are well positioned allow the operator to see the front and rear of the feeder and the paver hopper area always providing optimal visibility around the feeder.
IMIX Technology The heart of the IMIX-system is the combination of three strategically positioned devices: a conical auger in the hopper, a flow divider in the conveyor and a mixing system at the end of the main conveyor. The augers in the hopper push the large particles, which are stagnant at the colder outer sections on the hopper towards the middle of the conveyor to join the main flow. The material is transported by the movement of the belt to the top, where the flow of material is split by a flow divided into two streams. These streams of material are mixed and blended by an auger mixing system. This equalizes temperatures within the mix and blends large and small stones. The result is consistent and long-lasting road quality, according to the manufacturer.
Investment Flexibility MF2500CS may be equipped with the SW6500 SwingApp conveyor for long side reach for paving over barriers and in-line or echelon paving applications. Dynapac MF2500CS is the only machine that offers this flexibility of adding Swing app at the initial time of purchase or at later date, the manufacturer said. The newly developed 28 ft. long conveyor SW6500 has a side reach of 12.5 ft. Due to its integrated quick coupling cylinders and lifting points, the SW6500 can be mounted behind any MF2500CS within 20 minutes. This reduces investment cost for the contractors.
Smart Belt Conveyor Design The feeder’s rubber belt is mounted directly on metal stiffeners. This allows longer intervals for belt changes and a higher reliability reducing the total operating costs. The newly positioned spraying beam under the front hopper flap guarantees a permanent wet feeder belt. This prevents adhesion with difficult mixes and weather conditions, according to the manufacturer. The feeder belt is held in place by chain rollers. The new belt is attached to the old one with a quick coupling system and fed in place. This design makes a feeder belt change possible within a couple of hours. No vulcanization is needed,. For large paving widths, the Dynapac MF2500 delivers a feeding capacity of up to 4,000 tons per hour. The feeder also delivers a cleaning time of less than 30 minutes. Operator Comfort The MF2500CS MTV’s hydraulic liftable platform elevates the operator area approximately 4 ft. with a touch of a button providing a 360-degree complete jobsite view. The truck assist feature makes truck docking/un-docking to the feeder simple and efficient and eliminates the dump person from the job site. As well, a series of LED bar lights signals the truck driver when to back up, dump the material
Distance Assist Maintaining a safe distance between the material feeder and paver — while docking to the truck to the feeder and paver simultaneously — can be a daunting task. Dynapac Distance Assist automatically maintains a set distance between the paver and feeder. The feeder is equipped with a laser sensor, which allows the feeder operator to virtually connect to the paver and follow the speed of the paver movement. The feeder operator can focus on the job at hand which is material transfer. Combined with the possibility to save multiple distances, feeding two pavers becomes less stressful with the Dynapac MF2500CS equipped with the SwingApp. To keep the paver operator informed, the feeder is equipped with a LED bar, which shows the status of the radar sensor and the deviation to the correct distance. Swing Assist Feeding two pavers simultaneous is often demanding for the feeder operator. Via the SwingApp, Dynapac Swing Assist helps the operator by recording the height and angle of swing for both pavers’ locations, allowing the operator to recall the positions by just the press of a button. In combination with Distance Assist the feeder drives automatically to the correct position and the SwingApp moves directly over the hopper of the paver. For more information, visit www.dynapac.us.
2730 Falkenburg Road HQ Riverview, FL 33578 (813) 620-1000 4343 Northwest 77th Ave Miami, FL 33166 (305) 592-5740 3933 Martin Luther King, Jr. Blvd West Palm Beach, FL 33404 (561) 848-6618 4333 North John Young Pkwy Orlando, FL 32804 (407) 299-1212 3005 Hanson Street Fort Myers, FL 33916 (239) 334-3627 4618 Scarborough Drive Lutz, FL 33559 (813) 995-0841 1730 N. Nova Road Holly Hill, FL 32117 (407) 299-1212 2710 Falkenburg Road Riverview, FL 33578 (813) 621-4902 - Parts 1751 Copans Road, Unit 8 Pompano Beach, FL 33064 (954) 977-9541 - Parts 6265 E Sawgrass Road Sarasota, FL 34240 (941) 960-2004 - Parts
www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 (912) 445-2880
www.richmondmachinery.com 1701 Roseneath Rd. Richmond, VA 23230 (804) 359-4048
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 43
www.powerequipco.com
www.tec1943.com 150 Piper Lane Alabaster, AL 35007 (205) 621-2489
243 South Jackson St. Grove Hill, AL 36451 (251) 275-4158
309 Hamric Drive West Oxford, AL 36203 (256) 831-2440
5336 Messer-Airport Hwy Birmingham, AL 35212 (205) 591-2131
108 Skylab Drive NW Huntsville, AL 35806 (256) 851-2222
3820 Greensboro Ave. Tuscaloosa, AL 35405 (205) 752-0621
800 Church St. N.E. Decatur, AL 35601 (256) 355-0305
2100 East I-65 Service Rd. North Mobile, AL 36617 (251) 457-8991
3305 Highway 77 Panama City, FL 32405 (850) 763-4654
4307 Reeves Street Highway 431 North Dothan, AL 36303 (334) 678-1832
3285 Selma Highway Montgomery, AL 36108 (334) 288-6580
9036 Pine Forest Rd. Pensacola, FL 32534 (850) 505-0550
3300 Dozer Lane Knoxville, TN 37920 (HQ) (865) 577-5563
beardequipment.com 7566 W. Tennessee St. Tallahassee, FL 32304 (850) 575-5600
4295 Bonny Oaks Drive Chattanooga, TN 37406 (423) 894-1870
3033 US Hwy 27 E. Perry, FL 32348 (850) 584-9200
1487 Rock Springs Road Kingsport, TN 37664 (423) 349-6111
2578 SE Baya Drive Lake City, FL 32025 (386) 752-9544
320 Waldron Rd. LaVergne, TN 37086 (615) 213-0900
6870 Phillips Highway Jacksonville, FL 32216 (904) 296-5000
3050 Ferrell Park Cove Memphis, TN 38116-3502 (901) 346-9800
356 N. Hwy 17 Palatka, FL 32177 (386) 326-6268
1545 Highway 45 Saltillo, MS 38866 (662) 869-0283
4539 NW 44th Avenue Ocala, FL 34482 (352) 732-4646
Page 44 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
RICHMOND MACHINERY & EQUIPMENT www.richmondmachinery.com Richmond, VA 804-359-4048 800-662-6485
r o l l w i th th e l e ad a er s . When y p g q y p ,y g y all jobs big and small. Industry-ex y clusive technologies lik ke our 8-amplitude drums and the real-time density vallues of Compact Assist s with Density Direct™ mak m e remarkable precision an a everyday occurrence. Contact your nearest Volvo Construction Equipment de ealer location and start boostting your productivity and pro ofits today.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 45
/.-,+*)('&%$#-."! $$# &% $ #% # #" # # # # #
South Carolina 844.25 52.6242 Blanch hardMachinery.com/paving
Southern Flo orida 305.592.536 305 592 536 60 KellyTractorr.com
Western North Carrolina 336.323.5375 paving CarolinaCat.com/p
Eastern North Carolina 800.451.7278 GregoryPoole.com/paving
North and Central Florida 904.737.7730 904 737 7730 RingPower.com/paving
Page 46 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Sakai America Introduces Three Newest HQ Hires Sakai America has three new hires in the Adairsville, Ga., headquarters. Joey Queen joined Sakai America in the newly created manufacturing engineer role. Queen has more than 20 years in manufacturing and tooling with the heavy equipment and heavy machine components industries. “Joey is going to be a huge asset for us on the assembly line,” said Kevin McClain, VP Operations at Sakai America. “He has already fine-tuned our processes and is focusing on our assembly teams becoming more efficient. We have some big production goals this year, and Joey is going to help us realize those goals.” Curtis McCrillis recently was hired as service manager of Sakai America. “We are excited for our dealers to get to know Curtis,” said Kendall Phillips, product support manager. “He is new to asphalt and soil rollers, but he knows heavy equipment, the construction industry and what it takes to support dealer service teams.” McCrillis comes to Sakai America from a local heavy equipment dealer, where he held several service and management positions.
beardequipment.com 7566 W. Tennessee St. Tallahassee, FL 32304 (850) 575-5600 3033 US Hwy 27 E. Perry, FL 32348 (850) 584-9200 2578 SE Baya Drive Lake City, FL 32025 (386) 752-9544 6870 Phillips Highway Jacksonville, FL 32216 (904) 296-5000
(L-R) are Joey Queen, Curtis McCrillis and Rosa Bennett.
Rosa Bennett joins the company as receiving coordinator where she will work with the inventory control team on inbound component and parts management. “As we continue to increase the number of machines we assemble, our inventory management only becomes more important,” said Wes Shepherd, purchasing and materials manager. “Rosa will be instrumental in helping us keep our teams stocked with parts and communicating with our vendors.” For more information, visit www.sakaiamerica.com.
356 N. Hwy 17 Palatka, FL 32177 (386) 326-6268 4539 NW 44th Avenue Ocala, FL 34482 (352) 732-4646
www.reynoldswarren.com
FHWA: Asphalt Pavements Now Eligible for Federal Funding to Reduce Carbon The Federal Highway Administration (FHWA) released its Carbon Reduction Program (CRP) Implementation Guidance, unlocking $6.4 billion in formula funding over five years to help states and localities develop carbon reduction strategies. While the CRP was established in the Infrastructure Investment and Jobs Act (IIJA) of 2021, also known as the Bipartisan Infrastructure Law (BIL), NAPA sought inclusion of paving activities by highlighting asphalt pavement’s many climate-friendly technologies, to help states and localities meet their climate goals. Such efforts included a February letter to Senate Committee on Environment & Public Works Chairman Tom Carper and Ranking Member Shelley Moore Capito requesting support for including the Stabenow and Wicker amendment to add eligibility for “projects using pavement technologies, including designs, materials and practices that reduce carbon emissions.”
Due to sustained efforts by NAPA and our transportation construction partners, the CRP guidance makes low-carbon pavement technologies eligible for this important program. “NAPA worked to bring a coalition of stakeholder groups together to advocate for this,” said NAPA Executive Vice President for Advocacy Jay Hansen. “It opens opportunities for our industry to provide carbon-reduction solutions for the citizens and communities we serve across the country.” The CRP guidance includes lowcarbon asphalt pavements as follows: Sustainable pavements technologies that reduce embodied carbon during the manufacture and/or construction of highway projects could be eligible for CRP if a lifecycle assessment (LCA) demonstrates substantial reductions in CO2 compared to the implementing Agency’s typical pavementrelated practices. The LCA Pave Tool can be used to assess the CO2 impacts of pavement material and design deci-
sions. What this means: • There is a new core highway program in which low-carbon asphalt pavement technologies are now eligible. • This is NOT a mandate on state transportation agencies or the industry, but a free-market approach to utilize ready-to-go pavement technologies that reduce carbon emissions. Detailed information is available directly from FHWA. The availability of funding for lowcarbon pavement technologies supports the asphalt pavement industry’s goal to reach net zero carbon emissions by 2050, outlined in The Road Forward, which will require working with partners like FHWA and state departments of transportation. NAPA is launching a webinar series, The Road to Zero: Making Sense (and Cents) of Climate Stewardship, beginning with An Introduction to The Road Forward on May 2.
1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 (912) 445-2880
www.richmondmachinery.com 1701 Roseneath Rd. Richmond, VA 23230 (804) 359-4048
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 47
TRUST LEEBOY Y.. AS DEPENDABLE A AS YOUR O DAY IS LONG.
We are LeeBoy. The name behind the world’s most dependable and productive commercial asphalt paving equipment. Visit your local dealer today.
(844) 4 MY DOBBS www.dobbsequipment.com
www.tec1943.com 150 Piper Lane Alabaster, AL 35007 (205) 621-2489
243 South Jackson St. Grove Hill, AL 36451 (251) 275-4158
309 Hamric Drive West Oxford, AL 36203 (256) 831-2440
5336 Messer-Airport Hwy Birmingham, AL 35212 (205) 591-2131
108 Skylab Drive NW Huntsville, AL 35806 (256) 851-2222
3820 Greensboro Ave. Tuscaloosa, AL 35405 (205) 752-0621
800 Church St. N.E. Decatur, AL 35601 (256) 355-0305
2100 East I-65 Service Rd. North Mobile, AL 36617 (251) 457-8991
3305 Highway 77 Panama City, FL 32405 (850) 763-4654
4307 Reeves Street Highway 431 North Dothan, AL 36303 (334) 678-1832
3285 Selma Highway Montgomery, AL 36108 (334) 288-6580
9036 Pine Forest Rd. Pensacola, FL 32534 (850) 505-0550
2730 Falkenburg Road HQ Riverview, FL 33578 (813) 620-1000 4343 Northwest 77th Ave Miami, FL 33166 (305) 592-5740 3933 Martin Luther King, Jr. Blvd West Palm Beach, FL 33404 (561) 848-6618 4333 North John Young Pkwy Orlando, FL 32804 (407) 299-1212 3005 Hanson Street Fort Myers, FL 33916 (239) 334-3627
4618 Scarborough Drive Lutz, FL 33559 (813) 995-0841 1730 N. Nova Road Holly Hill, FL 32117 (407) 299-1212 2710 Falkenburg Road Riverview, FL 33578 (813) 621-4902 - Parts 1751 Copans Road, Unit 8 Pompano Beach, FL 33064 (954) 977-9541 - Parts 6265 E Sawgrass Road Sarasota, FL 34240 (941) 960-2004 - Parts
Page 48 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Trimble Introduces Its Next Gen Roadworks Paving Control System
Blanchard Machinery blanchardMachinery.com/paving Columbia,SC 803-791-7100 Florence,SC 843-678-8520 Rock Hill,SC 803-324-9600 Simpsonville,SC 864-963-3645 Myrtle Beach,SC 843-399-2074 Summerville,SC 843-871-2000 Hilton Head,SC 843-784-6766
Kelly Tractor kellytractor.com Miami, FL 305-592-5360 Davie, FL 954-581-8181 West Palm Beach, FL 561-683-1231 Clewiston, FL 863-983-8177 Ft. Myers, FL 239-693-9233
Gregory Poole Equipment Company gregorypoole.com
Roadworks helps contractors save on fuel costs and reduce both machine wear and tear and operator hours. In addition, asphalt temperature mapping provides color-coded data to allow operators to compact at the correct temperature, reducing material waste and rework.
Trimble introduced its Roadworks paving control platform for asphalt compactors that enables operators to accurately control the compaction process, while reducing unnecessary passes that can result in over compaction. This highly accurate, 3D paving control system is designed to improve the speed, accuracy and ease of asphalt compaction, according to the manufacturer. The system leverages the highly intuitive Android-based Trimble Roadworks software to maximize ease of use, shortening training times and decreasing downtime for operators already familiar with the Roadworks user interface. With the proper hardware and software configurations, the new system is flexible and can support a variety of job site needs and specifications. Roadworks helps contractors save on fuel costs and reduce both machine wear and tear and operator hours. In addition, asphalt temperature mapping
provides color-coded data to allow operators to compact at the correct temperature, reducing material waste and rework. In addition to helping operators achieve greater accuracy and efficiency, Roadworks is available at various pricing levels to help meet the unique needs of each contractor. New compactor licenses make it possible for contractors to pay for only the functionality they need, and office-only licenses provide increased functionality in the office. Users also can benefit from ongoing Roadworks platform development. “This release is particularly important because every day we’re seeing more DOTs and private owners build technology requirements into their RFPs. We’re expecting there to be an influx of projects over the coming months and years as the result of increased infrastructure funding,” said Kevin Garcia, general manager, Trimble Civil Specialty Solutions. “The Trimble Roadworks platform
is specifically designed to be easy to learn and use. Variable pricing helps make this platform even more accessible and levels the playing field for contractors of all types and sizes.” Connected Site Functionality Roadworks is compatible with Trimble WorksOS and Trimble WorksManager software. This enables contractors to send construction-ready models from the office to the machine as well as to remotely monitor jobsite progress and activity. In addition, productivity data collected from the machine is automatically synced back to the office. Availability Trimble Roadworks paving control platform for asphalt compactors is available now to order through the worldwide SITECH distribution channel. For more information, visit heavyindustry.trimble.com/roadworks-asphalt.
Fayetteville, NC 910-424-4400 Mebane, NC 919-568-7500 Raleigh, NC 919-828-0641 Washington, NC 252-946-1081 Wilmington, NC 910-371-6301
Carolina Cat carolinacat.com Charlotte, NC 704-596-6700 Asheville, NC 828-251-2500 Greensboro, NC 336-294-5240 Hickory, NC 828-464-7045 Monroe, NC 704-292-1555 Boone, NC 828-268-9992
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 49
The work may be under your feet, but you’re looking ahead - to the next challenge and the next deadline. Your local Cat Dealer
Built to Exceed the Demands of the Commercial Paving Contractor
WE’RE RIGHT THERE WITH YOU Ring Power
Yancey Bros. Co.
ringpower.com St. Augustine, FL 904-737-7730 Brooksville, FL 352-796-4978 Daytona Beach, FL 386-947-3363 Gainesville, FL 352-371-9983 Jacksonville, FL 904-714-2600 Lake City, FL 386-755-3997 Lakeland, FL 863-606-0512
Ocala, FL 352-732-2800 Orlando, FL 407-855-6195 Palm Bay, FL 321-952-3001 Sarasota, FL 941-359-6000 Tallahassee, FL 850-562-2121 Tampa, FL 813-671-3700
Thompson Tractor Company
yanceybros.com
Austell, GA 800-282-1562 Albany, GA 800-768-2892 Augusta, GA 800-446-5131 Bloomingdale, GA 800-482-1144 Brunswick, GA 800-299-5010 Calhoun, GA 800-752-9804
Columbus, GA 800-633-5240 Dacula, GA 800-545-2945 Macon, GA 800-633-5180 McDonough, GA 888-926-2392 Savannah, GA 800-755-8382 Statesboro, GA 888-764-6506
thompsontractor.com
Valdosta, GA 800-755-6841 Washington, GA 888-678-3211 Waycross, GA 888-948-2443
Alabaster, AL 205-664-4833 Attalla, AL 256-570-1100 Tarrant, AL 205-841-8601 Crestview, FL 850-682-6510 Tanner, AL 256-353-7721 Dothan, AL 334-671-1040
Hanceville, AL 205-283-0128 Huntsville, AL 256-532-1776 Spanish Fort, AL 251-626-5100 Montgomery, AL 334-215-5000 Opelika, AL 334-749-3359 Oxford, AL 256-831-4104
Panama City, FL 850-785-4007 Pensacola, FL 850-471-6700 Thomasville, AL 334-636-0420 Tuscaloosa, AL 205-247-2800 Tuscumbia, AL 256-381-2771
Page 50 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Richmond Machinery The Paving Equipment Professionals
866-430-7539
www.jfwequipment.com sales@jfwequipment.com
Serving the Asphalt Industry for 30 Years New Marathon TPS250T tack distributor, Honda gas eng, 18GPM pump, 250 gal, 5 ft spray wand w/50 ft hose, 6 ft spray bar, operator’s platform, propane burners, flushing system, electric brakes $17,950
1701 Roseneath Road • Richmond, VA 23230 (804) 359-4048 • www.richmondmachinery.com
New Marathon walk behind infrared heater, 3 ft x 3ft, 3 individual 1 ft sections, heats up very quickly, 360,000 BTU propane burner - $6,950
2007 Rosco Maximizer II distributor, 1900 gallons, EZ-2S computer w/1 ft cut-offs, propane burners, 12 ft spray bar, 2007 International 7300 w/DT466 245 hp diesel engine, auto trans, 2 spd axle - $63,000
2010 Rosco Max II distributor, 1900 gallons, EZ-2S computer w/1 ft cut-offs, diesel burners, 12 ft spray bar, 2010 Freightliner M2 w/Mercedes dsl eng, 6 spd manual trans - $98,000
2015 Laymor Sweepmaster SM400 broom, Kubota diesel engine, water system, 8 ft broom, cab w/heat & a/c, all new tires - $36,000
New Marathon TPS115S tack distributor, Honda gas eng, 10GPM pump, 115 gallons, 5 ft spray wand w/50ft hose, hose reel, 80,000 BTU propane burner, flushing system - $10,300
2018 Broce BW260 broom, Kubota diesel engine, 8 ft broom, water system, tow hitch - $26,000
2006 Cat AS2301 electric screed, 10-18 ½ ft, power crown, slope & height - $4,500
2015 Superior DT80-K broom, Kubota diesel eng, 8 ft broom, heat & a/c, water system - $36,000
3517 Wayne White Rd., Climax, NC 27233
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 51
Roads must be built. Worlds must be connected. DOUBLE DRUM OSCILLATION & HIGH FREQUENCY
DURABLE EASY TO USE
GSE - Great Southern Equipment Company www.gsequipment.net
Tampa, FL 866/586-8956
Tallahassee, FL 850/574-0892
Pompano Beach, FL 954/327-8808
Orlando, FL 407/859-9160
Ft. Myers, FL 239/334-6063
Jacksonville, FL 904/268-4400
Reynolds-Warren Equipment Company www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 800/875-5659 404/361-1593
www.sakaiamerica.com (800) 323-0535
Page 52 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Astec Launches Updates to RP-Series Highway Class Asphalt Pavers Controls Astec announced the debut of a new, modern operator control system on all Roadtec RP-series highway class asphalt pavers. The RP paver line has been updated with operator controls that provide improved functionality and a compact, modern feel. All highway class asphalt pavers are now outfitted with an innovative digital control system and easy-tounderstand touch screen interface. These advanced updates deliver a balance of intuitive technology and simplified operation, according to the manufacturer. Keith Hagy, product manager of Astec paving products, said, “We are always motivated by our customers’ needs and we are continually committed to innovation and progress. This new advancement is the perfect coupling of invention and customer focus. By listening to our customers, we developed a highly functional, technologicallyadvanced control system that is still simple to operate and service.” The reliable and easy-to-service control system includes: • Digital Operator Panel — Panel displays clear and easyto-understand digital icons, allowing operators to easily monitor machine status • Ergonomic Experience — Stations are conveniently positioned within reach of the operators’ fingertips • Touch Screen Display — Intuitive touch screen allows
operators to work quickly and efficiently The improved RP-series highway class pavers will continue to be manufactured with the same machine features and will now include the upgraded control panel technology standard on all models. For more information, visit astecindustries.com. All highway class asphalt pavers are now outfitted with an innovative digital control system and easy-tounderstand touch screen interface.
sioned in a manner to ensure economic and financial, social, environmental and institutional sustainability over the entire life cycle of the project.” In other words, it is a smart way to eliminate waste and maximize value at every stage of a project. Adams said at Granite Construction, the Watsonville, Calif.-based infrastructure contractor celebrating its 100th anniversary this year, sustainability is integrated into each project in the form of social responsibility, environmental stewardship and dependable governance because it delivers enduring economic value. She said that incorporation of sustainability principles not only helps them reduce costs and waste, but helps them develop new market opportunities, and attract, engage and retain talent, a key concern among all companies that work in the various trades. Ultimately, Adams said there were five lessons learned at Granite to both initiating a sustainability strategy, and making it work for everyone: 1. Lead with the value proposition. Sustainability isn’t just good for the environment, it’s good for the bottom line as well.
Columbia, SC 803-791-7100 Florence, SC 843.678.8520 Rock Hill, SC 803.324.9600 Simpsonville, SC 864.963.3645 Myrtle Beach, SC 843-399-2074 Summerville, SC 843.871.2001 Hilton Head, SC 843-784-6766
GREGORY POOLE EQUIPMENT COMPANY www.gregorypoole.com Fayetteville, NC 910-424-4400 Mebane, NC 919-568-7500 Raleigh, NC 919-828-0641
How Sustainability Works for Your Company Sustainability is a growing concern for all segments of the economy, including construction and paving companies. Not only because of the environmental impact on the community, but for the economic impact on companies as well. In its World of Asphalt 2022 session “Developing a Sustainability Program that Works for Your Company,” University of Nevada Reno Professor Adam Hand and Granite Construction Sustainability Manager Raven Adams made the case for asphalt pavement and infrastructure construction companies to develop a sustainability program, and how to approach it. According to Hand and Adams, over the past 30 years, a dollar invested in a company with a high commitment in sustainability will have grown 47 percent more than that same dollar invested in a peer company without a high commitment to sustainability. Why? In the case of infrastructure companies, Adams and Hand cite the InterAmerican Development Bank saying, in 2018, that sustainability infrastructure projects “are planned, designed, constructed, operated and decommis-
BLANCHARD MACHINERY www.blanchardmachinery.com/paving
2. Connect the right teams. Different teams will have different responsibilities and contributions to both create and implement the plan. Knowing who they are and what they can do ahead of time will lead to a greater chance of success. 3. Educate your stakeholders to generate buy-in. As the saying goes, “A person convinced against their will is of the same opinion still.” Making sure an organization’s stakeholders are properly educated and bought-in will help lead to sustainable success. 4. Understand the psychology of goal setting. Businesses are no stranger to setting goals for performance but knowing why goals exist will lead to more productive, and attainable, goals being set. 5. Understand the organization’s data systems to measure for continuous improvement. Knowing an organization’s data systems will help with understanding what can be measured, and what can be improved. For more education on sustainability, ConExpo-Con/AGG, running March 14 to 18, 2023, at the Las Vegas Convention Center, has its own sustainability track for education sessions.
Washington, NC 252-946-1081 Wilmington, NC 4910-371-6301
CAROLINA CAT www.carolinacat.com Charlotte, NC 704-596-6700 Asheville, NC 828-251-2500 Greensboro, NC 336-294-5240 Hickory, NC 828-464-7045 Monroe, NC 704-292-1555 Boone, NC 828-268-9992
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 53
The Worldwide Leader in Concrete Paving Technology
www.gomaco.com ❘ info@gomaco.com GOMACO offers the full range of concrete slipform pavers, curb and gutter machines, trimmers, placer/spreaders, texture/cure machines and bridge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+® control system, created in-house by our software engineers from the wants and needs of contractors paving in the field. At the heart of GOMACO equipment is our passion for concrete and our commitment to our customers. We look forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.
STOWERS MACHINERY CORPORATION www.stowerscat.com/gomaco
YANCEY BROS. CO. www.yanceybros.com
RING POWER www.ringpower.com
Chattanooga, TN 423-698-6943
Knoxville, TN (West) 865-218-8800
Austell, GA 800-282-1562
Calhoun, GA 800-752-9804
Macon, GA 800-633-5180
Valdosta, GA 800-755-6841
St. Augustine, FL 904-737-7730
Jacksonville, FL 904-714-2600
Orlando, FL 407-855-6195
Tallahassee, FL 850-562-2121
Crossville, TN 931-484-4040
Sevierville, TN 865-595-3750
Albany, GA 800-768-2892
Columbus, GA 800-633-5240
McDonough, GA 855-901-0100
Washington, GA 888-678-3211
Brooksville, FL 352-796-4978
Lake City, FL 386-755-3997
Palm Bay, FL 321-952-3001
Tampa, FL 813-671-3700
Knoxville, TN (East) 865-546-1414
Tri-Cities, TN 423-323-0400
Augusta, GA 800-446-5131
Dacula, GA 800-545-2945
Savannah, GA 800-755-8382
Waycross, GA 888-948-2443
Daytona Beach, FL 386-947-3363
Lakeland, FL 863-606-0512
Sarasota, FL 941-359-6000
Brunswick, GA 800-299-5010
Kennesaw, GA 487-788-1773
Statesboro, GA 888-764-6506
Gainesville, FL 352-371-9983
Ocala, FL 352-732-2800
Page 54 • June 15, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Most Often, Common Sense Prevails When Mitigating Risks
Frequent site inspections, regular safety meetings and rigorously enforced site safety standards supplemented with real-time data collection systems are suggested. SAFETY from page 34
danger on the construction site. Solvents, liquid petroleum gas and adhesives pose multiple risks ranging from flammability and combustion to inhalation dangers, said Flynn. “As the general public has become inured over the last two years to wear masks due to the COVID pandemic, construction workers and especially safety officers have long been aware of proper breathing protection procedures.” Such materials must be stored and used in adequately ventilated spaces, he continued. “Fire or even explosions are the most obvious risk associated with combustible and/or flammable substances. However, they pose additional risks that are often overlooked.” Simple skin contact with these materials can cause injury, said Flynn. They’re often more dangerous when inhaled due to the lack of or failure to use proper respiratory protection. “Damage to the lungs and respiratory system overall can range from immediate to long-term and can, in many cases, be fatal.” Foot injuries are a very common occurrence on construction sites, especially from falling objects. But there are many other causes and types of injuries. Rhoades Legal notes that in addition to electrical shock, workers can suffer broken bones, punctures, cuts and lacerations, burns and sprains all involving the feet and negligence.
The law firm noted that workers can be crushed or suffer broken foot bones due to falling objects, moving vehicles and being trapped or caught between objects. Punctures of the sole of the foot are caused by loose nails, sharp metal or glass objects. “Puncture wounds can easily get infected if not treated promptly. You can even get tetanus from a puncture injury,” according to the legal team. Cuts and lacerations of the feet can be caused by chainsaws, rotary mowers and unguarded or improperly guarded heavy machinery. Foot-related burn injuries can result from splashing molten metal, chemical spills, contact with fire and flammable or explosive materials. Electrical shock is caused by static electricity, contact with sources of electricity, including exposed hot wiring or wiring that is not properly grounded. Finally, sprains can happen in slip and fall accidents. A worker could slip and fall on scaffolding or from wearing improper footwear. Maintaining Safe Work Sites Many local jurisdictions provide legal means to compensate injured workers, but both site owner and contractor can be proactive by integrating a mix of strictly enforced site safety practices, OSHA regulations and simple common sense, said Flynn. “By collecting and monitoring information about the project, increasingly in realtime, structural engineers can anticipate
problems before they reach the critical stage and can be managed before someone gets hurt.” He urged frequent site inspections, regular safety meetings and rigorously enforced site safety standards supplemented with real-time data collection systems. “Comprised of wireless onsite sensors coupled with data collection nodes, such systems streamline the structural engineer’s ability to monitor the entire building site and anticipate problems before they arise,” said Flynn. “These systems can be customized to monitor material storage and the location and movement of workers throughout the site, thereby giving the engineer the ability to anticipate and prevent dangerous or even deadly accidents before they happen.” What simple common-sense measures can be implemented on the job site? The list is long, but Rhoades refers to OSHA’s rules for preventing workplace injuries: • Workers must wear safety shoes when working in locations where there is a risk of slipping and falling or objects piercing the sole. • Protective footwear must meet ANSI Z4 or have equivalent design requirements. Impact and compression protection are provided by all ANSI-approved shoes. “However, the level and sort of protection may not always be the same. Different footwear protects users in various ways. Make sure to review the label of the footwear.” Shoes or boots may need to have special electrical conductivity insulation or other non-conductive protective material in order
to prevent electrical shock. Chemical-resistant boots may be required to protect against caustic, reactive, toxic or corrosive substances during cleaning or surface preparation. Slip-resistant shoes should always be worn in any type of construction or production facility environment, but especially if the worker will have to be in icy or rainy weather conditions. Many construction work settings require boots with toe caps and puncture-proof soles. Non-slip soles, chemical-resistant materials, insulation or other protective features may be required in your profession. “Ensure that the shoes are safe according to necessary safety standards.” Grant Law Office noted the adoption of additional safety precautions to reduce the risk of injury specifically from falling objects on the construction site: • Always wear protective gear, such as helmets, goggles and hard-toe boots. Avoid hazardous areas for falling materials. • Never walk or stand under heavy equipment, such as a front loader, hoist or crane, particularly when it is carrying a load. • Use the proper equipment for the job at hand. Never stack materials or objects too high. And inspect equipment and tools before using them. • Never use improperly maintained or faulty equipment or tools; never exceed the lifting capacity of a hoist, crane or lift; and secure tools and equipment properly when working overhead. CEG
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 15, 2022 • Page 55
www.PowerEquipCo.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283
www.tec1943.com Birmingham, AL • 205/591-2131 Pensacola, FL • 850/505-0550 Alabaster, AL • 205/621-2489 Atlanta, GA • 404/366-0693 Anniston, AL • 256/831-2440 Albany, GA • 229/435-0982 Decatur, AL • 256/355-0305 Augusta, GA • 706/798-7777 Dothan, AL • 334/678-1832 Calhoun, GA • 706/879-6200 Huntsville, AL • 256/851-2222 Columbus, GA • 706/562-1801 Mobile, AL • 251/457-8991 Hoschton, GA • 706/654-9850 Montgomery, AL • 334/288-6580 Kennesaw, GA • 678/354-5533 Tuscaloosa, AL • 205/752-0621 Macon, GA • 478/745-6891 Panama City, FL • 850/763-4654 Savannah, GA • 912/330-7500
www.dobbsequipment.com Riverview, FL (HQ) • 813/620-1000 Miami, FL • 305/592-5740 West Palm Beach, FL • 561/848-6618 Orlando, FL • 407/299-1212 Fort Myers, FL • 239/334-3627 Lutz, FL • 813/995-0841 Daytona, FL • 407/299-1212 Riverview, FL • 813/621-4902 Pompano Beach, FL • 954/977-9541 Sarasota, FL • 941/960-2004
beardequipment.com Jacksonville, FL • 904/296-5000 Palatka, FL • 386/325-6268 Lake City, FL • 386/752-9544 Ocala, FL • 352/732-4646 Perry, FL • 850/584-9200 Tallahassee, FL • 850/575-5600
Page 56 • June 15, 2022 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide
Florida Coast Equipment Adds Berdan as Parts Vice President Florida Coast Equipment is establishing itself as the industry leader in aftermarket sales and services as it continues to attract world class talent from across the heavy equipment industry, the company announced June 2. “At Florida Coast Equipment, we aren’t just interested in selling you a machine,” said Todd Bachman, president of Florida Coast Equipment. “Our customers have rightfully come to expect superior customer service and unrivaled product support and we will never waiver on that commitment.” As part of that commitment, Florida Coast Equipment announced the hiring of Steve Berdan, who brings more than 30 years of experience as an aftermarket parts expert to the company. Berdan spent the last 17 years growing Komatsu’s aftermarket sales through counter sales, location management, manufacturing parts distribution and multi-location parts management. “As Florida Coast grows we are laser-focused on improving our
business, service, and support to our customers each and every day,” said Brian Kimpton, CEO of Florida Coast Equipment. “Steve’s experience in the aftermarket parts business will continue the growth and customer service of our parts operations and we look forward to our customers benefitting from his knowledge and expertise in his new role as VP of Parts for Florida Coast Equipment.” Great companies start with great employees and Florida Coast Equipment has made it a top priority to attract the top talent in the country and Berdan fits that mold exactly, the company noted. Florida Coast Equipment and BIG ORANGE RENTAL is a family-owned and operated full-service Kubota dealership now serving 11 locations across the state (West Palm Beach, Ft. Pierce, Mims, Naples, Plant City, Land O’Lakes, Homestead, Kissimmee, Apopka, Ocala and Lecanto, Fla). For more information, visit www.FloridaCoastEq.com.
Steve Berdan
CTE Announces Matt Nazzaro’s Promotion to Exec. Veep, COO NAZZARO from page 24
“This company strives to be a trusted partner to its customers, employees and communities, and serving in this capacity is an honor and a responsibility I don’t take lightly,” said Nazzaro. “I’m looking forward to continuing my work with the Weisiger family, our outstanding board and the rest of the incredible team we’ve assembled.” About CTE Founded in 1926, CTE sells, rents and services construction and material handling equipment, truck engines, and engineered and power generation systems. The company is headquartered in Charlotte, N.C., and operates in North Carolina, South Carolina, Georgia, Tennessee and Alabama. The CTE family of brands includes Carolina Cat, LiftOne, Carolina Cat Power Systems, Prime Source, Hydraulics Express, SITECH Horizon, Power Products & Solutions and BlueSkye Automation. CTE was named as a U.S. Best Managed Company in 2021 and 2022, a designation sponsored by Deloitte Private and The Wall Street Journal that recognizes outstanding U.S. private companies and the achievements of their management teams.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 57
Authorized Bobcat Dealers BO BC A ATT.C O M
FLORIDA
Bobcat of Jacksonville, LLC Jacksonville 904-288-9181 www.bobcatjax.com Bobcat of Palm Beach West Palm Beach 561-689-9880 www.sbequipment.com Bobcat of Broward Pompano Beach 954-763-9880 www.sbequipment.com West Palm Beach 561-689-9880 www.sbequipment.com Bobcat of Treasure Coast Fort Pierce 772-460-9998 www.sbequipment.com
GEORGIA
Bobcat of Savannah Bloomingdale 912-236-5588 www.bobcatops.com
NORTH CAROLINA Bobcat of Asheville Arden 828-684-4403 www.bobcatops.com
R.S. Braswell Company Kannapolis 704-933-2269 www.rsbraswell.com
UP FOR WHA WHATE W T VER YOU’RE R UP AG GAINST
Bobcat of Charlotte Charlotte 704-343-9000 www.bobcatofcharlotte.com Bobcat of Monroe Monroe 704-289-2200 www.bobcatofmonroe.com Triangle Equipment Co., Inc. Morrisville 919-781-7910 www.ncbobcat.com Bobcat of Johnston County Garner 919-661-1833 www.ncbobcat.com Bobcat of Wilmington Wilmington 910-395-2050 www.ncbobcat.com
B o b c a t C o m p a n y i s a m e m b e r o f t h e D o o s a n G r o u p . D o o s a n i s a g l o b a l l e a d e r i n c o n s t r u c t i o n , g r o u n d s m a i n t e n a n c e a n d m a t e r i a l h a n d l i n g e q u i p m e n t , p o w e r a n d w a t e r s o l u t i o n s , a n d e n g i n e e r i n g t h a t h a s p r o u d l y s e r v e d c u s t o m e r s a n d c o mm u n i t i e s for more than a centur y. Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat C ompany in the United S tates and various other countries. ©2022 Bobcat C ompany. A ll rights reser ved. | 15 0 4
TENNESSEE
Bobcat of Clarksville Clarksville 931-436-9555 Bobcat of Nashville La Vergne 615-941-4000 www.bobcatofnashville.com
SOUTH CAROLINA Bobcat of Charleston North Charleston 843-725-6330 www.bobcatops.com Bobcat of Columbia Columbia 803-933-9996 www.bobcatops.com
Bobcat of Greenville Piedmont 864-269-3600 800-220-6266 www.bobcatops.com Bobcat of Spartanburg Spartanburg 864-342-9003 www.bobcatops.com
Bobcat of Myrtle Beach Myrtle Beach 843-236-4499 www.ncbobcat.com Bobcat of Rock Hill Rock Hill 803-670-2003 www.BobcatofRockHill.com
Page 58 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 59
tsu P ar ts Store The My K o m a ha ty ou mak es it e as y to ge t w need to keep your equip u ment running at its best.
Don’t have a My Komatsu account? No problem! Check out as our guest at mykomatsu.komatsu
LINDER INDUSTRIAL MACHINERY www.linder.com Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570
North Carolina Asheville • 828/681-5172 Charlotte • 980-777-8345 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031
South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/486-8080
POWER EQUIPMENT www.powerequipco.com Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283 Little Rock, AR • 501/823-4400 Springdale, AR • 479/927-1672
TRACTOR & EQUIPMENT COMPANY www.tec1943.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Huntsville • 256/851-2222 Mobile • 251/457-8991 Montgomery • 334/288-6580 Tuscaloosa • 205/752-0621
Florida Panama City • 850/763-4654 Pensacola • 850/505-0550
Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500
Page 60 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Jefferson Pike Widening Calls for Excavating, Grading TDOT from page 1
The Jefferson Pike project features bike lanes and sidewalks from Nissan Drive to the Stones River Bridge. In the more rural portion of the corridor, from the Stones River Bridge to I-840, the roadway will have 12-ft. shoulders on each side. A new bridge will be constructed over the Stones River, and the bridge over I-840 will be widened to include four travel lanes and a center turn lane. There will be signal modifications at the intersection of Jefferson Pike and Nissan Drive and new traffic signals at Hickory Grove Road and the I-840 eastbound and westbound access ramps. The project will allow for improved sight distance, with alignment significantly straightened. Construction calls for turn lanes to separate turning traffic from through traffic, a raised median throughout most of the project to separate directions of travel, along with adding traffic signals at Hickory Grove and I-840 ramps. As with most projects, motorists will be affected during construction. TDOT is taking steps to make sure detours go as smoothly as possible. “Crews will implement traffic shifts, lane closures, flagging operations, rolling roadblocks and other traffic control methods to complete various operations. There will be trucks entering and exiting the highway. It’s expected numerous short duration side road closures will be necessary.” TDOT has worked closely with Smyrna officials in planning for the road project. “During construction, we have progress meetings twice a month that include Town of Smyrna officials to keep them updated on the status of the project, and to give them an opportunity to voice concerns they are hearing from residents,” said Carpenter. “The Smyrna police department has been very helpful in monitoring work zones to reduce vehicle speeds. “The town helps get the word out to the public, emergency personnel and schools when high impact traffic control measures are upcoming.” Civil Constructors LLC serves as the prime contractor. The notice to proceed was January 2021, with work officially beginning the following month. The completion date is late July 2024. Tennessee DOT photo
Civil Constructors LLC serves as the prime contractor. The notice to proceed was January 2021, with work officially beginning the following month. The completion date is late July 2024.
Tennessee DOT photo
A variety of excavators and bulldozers are needed to complete the work, along with dump trucks and cranes.
Work involved in the widening project includes utility relocation; grade work; stormwater structures; bridge construction; and major traffic shifts. There are numerous key steps involved in each aspect of this project. Road and bridge construction are usually performed in phases, based on where traffic is running. Completing each phase is essential. Construction has progressed well, with most work being focused from the bridge over Percy Priest Lake to I-840. Grading operations have centered on excavating cut sections and building embankments. For Bridge 1 over Stones River/Percy Priest Lake, crews are currently setting Phase 1 beams. Workers are setting poles and placing wire in sections throughout the project. In addition, sewer construction involves building a new lift station near I-840. Crews are preparing to start a 36-in. water line, and gas line installation is progressing. see TDOT page 64
Tennessee DOT photo
A new bridge will be constructed over the Stones River, and the bridge over I-840 will be widened to include four travel lanes and a center turn lane.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 61
ALL STAR EQUIPMENT RENTALS & SALES, INC. Serving Southwest Florida 11680 Metro Parkway Fort Myers, FL 33966 888-459-7147 www.allstareq.com
Lowery True Value 26407 Cortez Blvd. Brooksville, FL 34602 352-793-9083 1305 W C 48 Bushnell, FL 33513 352-793-9083 www.lowerytruevalue.com
Page 62 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Manitowoc 18000 Crane 1:50 scale - When completed, Model stands over 5' high and box weighs over 40Lbs. Price is $1,800 and includes delivery.
Liebherr LTM1030/2 Mobile Crane, 1:50 scale - $100
Caterpillar 953 Traxcavator, 1:50 scale - $125
Roadtec RP190 Paver, 1:50 scale - $110
Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160
Komatsu PC360LC-11 Excavator, 1:50 scale - $125
Caterpillar D4, 2T Crawler w/ Letourneau push blade & Hyster winch, 1:16 scale - $235
Terex 33-07 Off-Highway Dump Truck, 1:40 scale - $215
Bobcat S530 Skid Steer Loader, 1:25 scale - $60
Shipping and Handling Included
Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
610-506-5961 Email – bmckeon9@gmail.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 63
BROOKS SALES, INC. www.brookssales.com 3144 Hwy 74 East Monroe, NC 28112 704-233-4242
LINDER TURF & TRACTOR www.lindertt.com 250 North Church Street Burlington, NC 27217 336-792-3412 1501 N. Memorial Drive Greenville, NC 27834 252-695-6200 5504 15th Street E Bradenton, FL 34203 941-755-5722
MASON TRACTOR CO. www.masontractorco.com 1050 Appalachian Hwy Blue Ridge, GA 30513 706-632-3777 McDonough, GA 30253 770-957-3370 Cumming, GA 30040 770-887-6119 Norcross, GA 30071 770-582-0377 Villa Rica, GA 30180 678-952-2037
RJV KUBOTA
www.rjvequipment.com Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576 Knoxville 3356 Rudy Street Knoxville, TN 37921 865-970-2840
CROSBY EQUIPMENT COMPANY, INC.
JONESBORO TRACTOR SALES INC.
TYLER EQUIPMENT CO., INC.
www.crosbyequipmentco.com
www.jonesboro-tractor.com 5312 Stadium Blvd. Jonesboro, AR 72402 888-931-9151 870-935-9151
www.tylerequipment company.com 2613 Main St. Conway, SC 29516 843-248-5294
1826 South Peterson Ave. Douglas, GA 31535 912-384-4664
Page 64 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALABAMA
Stone Equipment Co., Inc. 1797-A Fulton Spring Rd. Alabaster, AL 35007 844-786-6373 210 West Blvd. Montgomery, AL 36108 844-786-6373 www.stoneequipmentco.com
GEORGIA
Crosby Equipment Company, Inc. 1826 South Peterson Ave. Douglas, GA 31535 912-384-4664 5368 Hawkinsville Rd. Macon, GA 31216 478-257-8300 www.crosbyequipmentco.com
Taylor Construction Equipment 5640 Commerce Blvd. East Mobile, AL 36619 251-666-2924 www.taylorconstructionequipment.com
NED Georgia Richmond Hill-Savannah, GA 912-756-7854 www.nedealers.com
CAROLINAS
MISSISSIPPI
Formerly Grove River Machinery
North Carolina, South Carolina, Virginia, West Virginia
Powerscreen Mid-Atlantic, Inc. PO Box 2505 • Kernersville, NC 27285 Tel: 800-797-7276 Web: www.powerscreenmidatl.com
NED - Carolinas Formerly MAY-RHI, Richardson Service 1991, Inc
Bridge Reconstruction, Road Widening, Under Way On Jefferson Pike Project TDOT from page 60
The Bridge 1 over Stones River/Percy Priest Lake Phase 1 substructure is complete. Also, significant stretches of roadway have been built to subgrade. The job has included blasting for earthwork. The existing bridge over Stones River/Percy Priest Lake also will be demolished after Phase 1 of the new structure is complete. The plan’s quantity for road and drainage excavation is 360,000 cu. yds. This includes 165,000 cu. yds. scheduled to be excavated from the Army Corp of Engineers property at the West Stones Fork boat ramp to offset flowage easement fill. The planned quantity for borrow excavation totals 200,000 cu. yds. to be hauled in from off site. Presplit is 2,270 sq. yds. Tasks remaining include finishing utility relocation; Phase 1 of bridges; Phase 1 of roadway; and swapping traffic to Phase 2, for the rest of the roadway and bridges to be built. Carpenter said soggy conditions have proven to be the biggest weather factor. “Rain and wet conditions prevent grading work from being productive, especially with the clays we are using.” A variety of excavators and bulldozers are needed to complete the work, along with dump trucks and cranes. Main materials include aggregate, asphalt, concrete, steel reinforcement, power poles, water line, sewer line and gas line.
Carpenter stressed that safety for both workers and the traveling public is a major concern, along with maintaining traffic flow and coordinating between all the stakeholders involved. Constructing bike lanes from Nissan Drive to Harbor Drive involves a wider typical section for earth work, base stone, asphalt, striping and signage. Sidewalks also will be built. The center turn lane generally requires wider typical section and more materials. The raised median adds a few more steps to the construction process. “We are happy to get this important widening project under way,” TDOT Commissioner Clay Bright said in a news release. “Smyrna and the Rutherford County area are growing rapidly. This project will help support that growth and make safety improvements to the corridor.” While much work remains on the project, Carpenter said having the opportunity to improve road conditions makes the long hours bearable. “It’s humbling and rewarding to be able to contribute to a project that, when completed, will enhance the safety of the roadway and support the economic prosperity of the community. Road construction can be a thankless venture, due to the inconvenience it can cause to the traveling public, but it’s well worth the struggle when the project is complete.” CEG
Charlotte, NC 704-228-0455 Clayton-Raleigh, NC 886-629-3784 Grimesland, NC 252-752-1500 Lexington, NC 866-629-3784 Columbia, SC 888-865-1002 Conway-Myrtle Beach, SC 800-968-0754 Piedmont-Greenville, SC 864-434-1154 Summerville-Charleston, SC 843-501-0566 www.nedealers.com
Mid South Machinery 3233 Hwy. 80 W. Jackson, MS 39204 601-948-6740 www.gomidsouth.com
Taylor Construction Equipment 3637 N. Church Avenue Louisville, MS 39339 833-773-3421 103 Industrial Park Road Philadelphia, MS 39350 833-773-3421 www.taylorconstructionequipment.com TENNESSE
FLORIDA
NED - Florida Formerly Earthmovers Construction Equipment Apopka-Orlando, FL 407-401-8956 Ft. Pierce, FL 772-212-4043 Tampa, FL 813-940-4405 www.nedealers.com
Taylor Construction Equipment 104 Brickmill Commercial Dr. Maryville, TN 37801 865-444-0883 132 Industrial Dr. White House, TN 37188 615-392-4803 www.taylorconstructionequipment.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 65
Safety Get an Is “A” Priceless, with Hyundai Not Expensive Hyundai Construction Equipment is excited to announce the launching of our new A-series machines. Along with a new look, these machines are Hyundai HX series excavators are packed packed full of standard new features with standard safety features that help and benefitswork to get theefficiently. job done your operators more efficiently. All cabs are ROPS/FOPS certified
A rearview camera, which can be • Cummins Performance Series Engines viewed from the 8-inch touchscreen Stage V emissions compliant engines monitor, is standard railsPositive and guard rails and • Large EPFCgrab (Electric Flow Control) Hyundai’s proprietary anti-slip surfaces Reduces daily fuel consumption by 8-11% help avoid falls while working on the of the Pump machine • outside EPIC (Electric Independent Control) Improved controllability reduced Automatic travel backupwith alarm is RPM drop standard
• Serviceability/Safety Enhanced cab visibility Easy access engine panels
Hyundai’s exclusive All-Around View Monitoring option provides unprecedented visibility to the worksite.
More standard features. More value. More standard features. More value.
www.hceamericas.com www.hceamericas.com To learn more about the safety features built into HX series excavators, contact your Hyundai dealer today. To learn more about the what the new Hyundai A-Series machines can offer your business, contact your Hyundai dealer today.
©2017 Hyundai Construction Equipment Americas. All Rights Reserved. ©2022 Hyundai Construction Equipment Americas. All Rights Reserved.
Page 66 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CLM EQUIPMENT CO., INC. www.clmequipment.com Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Houston, TX • 281-598-2500
GSE GREAT SOUTHERNDealer Imprint Ar HEAVY rea MACHINES INC. EQUIPMENT COMPANY www.heavymachinesinc.com www.gsequipment.com Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892 Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400
Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453 825 31st Street North Birmingham, AL 205-323-6108 • 844-344-8658
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 67
JUST BUILT BETTER. ASV TRACK LOADERS & SKID STEERS
From small landscaping projects and residential construction jobs to acres of excavation, ASV’s all-terrain machines enable you to work in more places and in more conditions so you can get more done every day.
DISCOVER THE ASV LINE-UP OF TRACK LOADERS AND SKID STEERS AT
Heavy Machines Inc. www.heavymachinesinc.com
www.loadersource.com
www.forestry21equipment.com
Forestry 21
CLM Equipment Co. Inc. www.clmequipment.com
www.briggsjcb.com
Murfreesboro, TN 629-335-3077
6953 Covington Hwy Lithonia, GA 30058 770-808-5500
11277 County Rd. 83 Lafayette, AL 36862 334-864-7250
3135 US Hwy 90 East Broussard, LA 70518 337-837-6693
8215 Palm River Road Tampa, FL 33619 813-605-7800
1310 Alabama Highway 9 South Piedmont, AL 36272 256-447-2150
4851 E Napoleon Road Sulphur, LA 70663 337-625-5942
7551 Presidents Drive, Suite 104 Orlando, FL 32809 407-841-4202
1739 New Franklin Rd. LaGrange, GA 30240 706-882-7250
2815 N Sam Houston Pkwy E Houston, TX 77032 281-598-2500
2525 Philips Highway Jacksonville, FL 32207 904-260-6105
Memphis, TN 901-260-2310 Birmingham, AL 205-323-6108 Mobile, AL 251-653-5955
Loader Source
Shreveport, LA 318-621-0854
Briggs JCB
2755 Marshall Drive Tifton, GA 31793 299-388-8120 © 2022 ASV Holdings, Inc. For more information, visit ASVI.COM.
Page 68 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 69
Alta Equipment Company
Power Equipment
www.altaequipment.com
www.powerequipco.com
CCS Equipment Sales, LLC
Parman Tractor & Equipment
539 SW Arrowhead Terrace • Lake City, FL 32024 386.758.7444
3300 Dozer Lane • Knoxville, TN 37920 865.577.5563
www.ccsequipment.com
www.parmantractor.com
Raleigh, Durham, Chapel Hill
8750 Philips Hwy • Jacksonville, FL 32256 904.737.6000
4295 Bonny Oaks Dr. • Chattanooga, TN 37406 423.894.1870
5428 Highway 96 • Youngsville, NC 27596 919.556.9110
3570 Dickerson Pike • Nashville, TN 37207 615.685.7800
8418 Palm River Road • Tampa, FL 33619 813.630.0077
1487 Rock Springs Rd. • Kingsport, TN 37664 423.349.6111
Fuquay-Holly Springs-Sanford-Fayetteville
9601 Boggy Creek Road • Orlando, FL 32824 407.850.9614
3050 Ferrell Park Cove • Memphis, TN 38116-3502 901.346.9800
5151 Martin Luther King Blvd. • Fort Myers, FL 33905 239.481.8554
1545 Highway 45 • Saltillo, MS 38866 662.869.0283
5210 Reese Road • Davie, FL 33314 954.581.4744
2801 W 65th Street • Little Rock, AR 72209 501-823-4400
836 North Broad St. • Angier, NC 27501 919.935.0505 5886 Ernest Taylor Rd. • Ayden, NC 28513 252.712.1033
781 E Randall Wobbe Lane • Springdale, AR 72764 479-927-1672
Atlantic Coastal Equipment Sales & Rentals www.acesalesandrentals.com
Ditch Witch
www.ditchwitchga.com 1807 West Oakridge Drive • Albany, GA 31707 229.435-5811
922 Longwood Drive • Richmond Hill, GA 31324 912.459.1155
Page 70 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Beard Equipment Company
Dobbs Equipment
beardequipment.com
www.dobbsequipment.com
Mobile, AL 36617 251/456-1993 Pensacola, FL 32534 850/476-0277 Freeport, FL 32439 850/835-3337 Panama City, FL 32404 850/769-4844 Tallahassee, FL 32304 850/575-5600
Perry, FL 32348 850/584-9200 Jacksonville, FL 32216 904/296-5000 Lake City, FL 32025 386/752-9544 Palatka, FL 32177 386/325-6268 Ocala, FL 34482 352/732-4646
Riverview, FL (HQ) 813/620-1000
Lutz, FL 813/995-0841
Miami, FL 305/592-5740
Daytona, FL 407/299-1212
West Palm Beach, FL 561/848-6618 Orlando, FL 407/299-1212
Riverview, FL 813/621-4902 Pompano Beach, FL 954/977-9541
Fort Myers, FL 239/334-3627
Sarasota, FL 941/960-2004
Flint www.flintequipco.com 1206 Blaylock St, Albany, GA 31706 229/888-1212 Fax: 229/435-3612 Dothan, AL 36303 334/794-8691 Troy, AL 36081 334/566-4181 Adairsville, GA 30103 770/773-9857 Atlanta, GA 30336 404/691-9445
Braselton, GA 30517 770/965-1889 Brunswick, GA 31525 912/264-6161 Cuthbert GA 39840 229/732-2631 Macon, GA 31216 478/788-1586 Savannah, GA 31408 912/964-7370 Valdosta, GA 31606 229/474-6680
Aynor, SC 29511 843/358-5688 Ladson, SC 29546 843/572-0400 Walterboro, SC 29488 843/539-1420 West Columbia, SC 29169 803/794-9340
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 71
Central Atlanta Tractor Sales, Inc.
Highway Equipment Company
4240 Martin Luther King Jr Drive SW Atlanta, GA 30336 770-819-6600
Roanoke Location 8071 Lee Highway Troutville, VA 24175 540-992-4150 www.highway-equipment.com
www.centralatlantatractor.com
Stone Equipment Co., Inc. 210 West Boulevard Montgomery, AL 36108 844-786-6373 334-625-6585
1797-A Fulton Springs Rd Alabaster, AL 35007 844-786-6373
www.stoneequipmentco.com
Taylor Construction Equipment 3690 N Church Avenue Louisville, MS 39339 662-773-3421 www.taylorbigred.com
Page 72 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alta Equipment Company www.altaequipment.com Lake City, FL 386-758-7444 Jacksonville, FL 904-737-6000 Tampa, FL 813-630-0077 Orlando, FL 407-850-9614
WANT AN EAS SY WAY AY TO TA TACKLE MO ORE JOBS WITH ONE MAC CHINE?
Fort Myers, FL 239-481-8554 Davie, FL 954-581-4744
PROBBLEM M
Miami, FL 305-477-2442
SOLLLV SOLV VED
CCS Equipment Sales, LLC www.ccsequipment.com Raleigh - Durham 5428 Highway 96 Youngsville, NC 27596 919-375-7129 877-469-3471
TORO® DINGO®
TX 1000 0 The Easy Way To Advertise Your Equipment
Run In Two Consecutive Issues – Black & White $135 • Color $195
TORO.COM M ©2022 The Toro Company. All Rights Reser ved.
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 11-12 EB Call 866-294-6103
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.
For more information, call Construction Equipment Guide today at
800/523-2200
Greenville, NC Ayden, NC 28513 252-712-1033
USDOT OKs $15.8M Grant for Florida’s Sunshine Corridor RAIL from page 22
SEVERE SERVICE ASPHALT CUTTERS (15 Models Available) Starting @ $1450.00 www.attachmentsintl.com attintl@loretel.net or 12-13 AP Call Us @ (218) 863-6444
Fuquay - Varina Angier, NC 919-935-0505
Grant Important First Step in Sunshine Corridor Webster was quoted in the Brightline news release as saying, “Transportation — moving people and goods — is a vital element of Florida’s economy. As a senior member of the Transportation & Infrastructure Committee, engineer, and longtime advocate for infrastructure, ensuring our state has the resources needed is one of my priorities.” Demings, his colleague in the U.S. House, added, “I’m proud to [be a part of announcing] this new federal funding that will expand Florida’s infrastructure and help grow our economy while ensuring the system functions safely and effectively. Our community is the heartland of tourism in America, and Brightline’s plan to connect Miami and Tampa to Orlando’s tourism centers will help supercharge our continued growth and attract visitors from across the country and around the world.” The idea for the Sunshine Corridor, Brightline Chief Executive Officer Michael
Reininger explained, was that it was to be a comprehensive and ambitious solution for the popular Central Florida region. “It represents the missing link in Brightline’s plan to connect Orlando and Tampa with modern, eco-friendly, intercity passenger rail,” he said. “New, innovative transportation solutions will provide an economic boost to Central Florida and make the state even more attractive to businesses and future residents.” Brightline noted that Central Florida is projected to experience significant growth in population, employment and tourism over the next 10 years, which will increase congestion on current roads and highways. Most travel between Tampa and Orlando is done via I-4, which recent studies identified as the deadliest road in America, according to Brightline. The train service has placed a big bet on intercity passenger rail being an increasingly vital tool to help the state manage future growth under constrained conditions that limit the ability to expand highways.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 73
Company Wrench JCB 125 Wilsons Mills Rd. Extension Smithfield, NC 27577 855-562-3526 141 Brickyard Rd Lexington, SC 29072 866-262-4181 803-520-0032 11301 Reames Rd. Charlotte, NC 28269 980-859-4680 www.companywrench.com
Low Country JCB 1008 E Hwy 80 Pooler, GA 31322 888-431-0130 www.lowcountryjcb.com
JCB of Chattanooga 1609 Church Rd Chattanooga, TN 37421 423-899-1219 www.jcbofchattanooga.com
Deep South JCB 6851 Greenwood Road Shreveport, LA 71119 318-621-9000 340 Airport Road Jackson, MS 39208 601-939-9655 761 Choctaw Drive Baton Rouge, LA 70805 225-383-6117 8489 West Oaklawn Road Biloxi, MS 39532 888-838-5485 www.deepsouthjcb.com
Briggs JCB 8215 Palm River Road Tampa, FL 33619 813-605-7800
3TS - 8W | ROC: 3,208 lb
2TS -7T | RO R C: 2,096 lb
3TS - 8T | ROC: 3,695 lb
Unique machines with endless possibilities. JC B T Teeleskids are the only skid steers and compact track loaders with a telescopic boom, allowing you to lifftt higherr,, reach ffaar ther and dig deeper than ever beffo ore. With three models to choose from, with rated operating capacities from 2,10 0 lbs to 3,70 0 lbs, you can complete tasks and access areas you wouldn’t haavve thought possible ... until now. For more inffo ormation, visit w w w.jcb.com//tteleskid or contact your local JCB dealerr.. L JCB DEALERS YOUR FAMILY OF LOCAL
7551 Presidents Drive, Suite 104 Orlando, FL 32809 407-841-4202 2525 Phillips Highway Jacksonville, FL 32207 904-260-6105 2755 Marshall Dr Tifton, GA 31793 229-388-8120 181 Riverbend Drive St. Rose, LA 70087 504-733-5640 www.briggsjcb.com /JCBNA
@J @JCBNA
JCBNA 4740
Page 74 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (WORLDWIDE): HITACHI EX400LC EXCAVATORS - NEED TO LOCATE HITACHI EXCAVATORS EX270, EX-300, EX-400, AND EX-450. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX450 EXCAVATORS - LOOKING TO BUY OLD USED HITACHI EX 450 EXCAVATORS. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI, JOHN DEERE, KOMATSU 300, 400, AND 450 SIZES EXCAVATORS. OFFER ME RUNNING OR NON-RUNNING EXCAVATORS. EMAIL: USEDEQUIPMENTSOURCING@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): LOOKING TO BUY HITACHI EXCAVATORS EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: INFO@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): KUBOTA B7300HSD TRACTOR WITH 60 INCH MOWER DECK. EMAIL: PRONCALLO@AOL.COM; PHONE: 845-225-7504 –––––––––––––––––––––––––––––––– WANTED (US): ACS INDUSTRIES – BUCKETS, ALL MODELS EMAIL: BEBOMOR2003@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU WA30-2 WHEEL LOADER - LOOKING TO BUY A REAR AXLE FOR A KOMATSU WA30-2. IF YOU HAVE A REAR AXLE PLEASE CONTACT ME @ 6I6/8I3/3642. ALSO INTERESTED IN BUYING COMPLETE RUNNING KOMATSU LOADERS WA40 OR SMALLER. EMAIL:CRAIGBERENS944@GMAIL.COM PHONE: 6I6-813-3642 –––––––––––––––––––––––––––––––– MANUFACTURER: MEC 3391RT AERIAL LIFT - CONTROL BOX FOR A MEC 3391RT YEAR 2000 PART NO. 20783. DOUBLE FUEL GAS/PROPANE. NO OUTRIGGER. EMAIL: TAVAKE08@ICLOUD.COM; PHONE: 415-748-8079 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS - NEED CATERPILLAR WHEEL LOADERS 950B, 950E, 966F, 966FII, 980F AND CATERPILAR MOTOR GRADERS 140G. EMAIL: NAQIB_KHAN73@YAHOO.COM; PHONE: +923333298751 ––––––––––––––––––––––––––––––––
WANTED (US): HITACHI EXCAVATORS, ALL MODELS - LOOKING TO BUY HITACHI EXCAVATORS EX270LC,EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM; PHONE: +923332316587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966F WHEEL LOADERS – NEED TO BUY USED CAT WHEEL LOADERS 966F, 966-F-II, 980C, AND CAT 970F. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CONCRETE PUMPS: SCHWING, PUTZMEISTER, ALLIANCE, ELBA, CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS, & SIZES, OLD OR NEW! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED AND PARTS & PUMPS NEEDING REPAIRS. INSTANT PAYMENT GUARANTEED. EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 140G MOTOR GRADERS – CAT USED MOTOR GRADER 140G AND 140H FOR OWN STOCK. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX330-5 EXCAVATORS – WE ARE LOOKING TO BUY A COUPLE OF UNITS OF HITACHI EXCAVATORS EX 330-5 & EX 450-5. IF YOU HAVE ANY OF THEM AVAILABLE, PLEASE LET ME KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988B WHEEL LOADER– WE NEED TO BUY A CAT USED WHEEL LOADER 936, 988B/F & 950B. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 992D EXCAVATORS – NEED TO LOCATE JOHN DEERE'S EXCAVATORS SIZES 190E, 200, 210, 230, 270, 300, 400. EMAIL: USEDEQUIPMENTS TRADINGLLC@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): EZ SCREEN 1200XLS SCREENING – ANYTHING THAT WOULD BE LIKE A 1200 OR1200 XLS. EMAIL: MAIERLANDSCAPING@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): CATERPILLAR BACKHOE LOADERS, ALL MODELS – NEED TO BUY USED CAT WHEEL LOADERS, BACKHOES, EXCAVATORS, HIGHWAY TRUCK. EMAIL: SEARCHT930@GMAIL.COM PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED: CHAINS AND SPROCKETS FOR KOBELCO 400IV OR 480 EXCAVATOR, NEW OR USED. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED: BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE BUCKETS, ALL MODELS; LOOKING FOR BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR DUMP TRUCKS - CAT 725-745'S 10,000 HOURS OR LESS, WILL BUY IN GROUPS. EMAIL: ANDREWL@BLACKSTARACA.COM; PHONE: 312-898-5355 –––––––––––––––––––––––––––––––– WANTED (US); TEREX BUCKET TRUCKS, ALL MODELS - 55 FT & 60 FT 4-5 YEARS OLD, PREFERABLY PREFER TEREX 5TC-55 & ALTEC AA55E PREFER FREIGHTLINER CHASSIS. EMAIL: ZACHZ@BLACKSTARACA.COM; PHONE: 815-575-6797 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS; RUNNING OR NONRUNNING UNITS REQUIRED. EMAIL: IMPERIALMACHINERYTRADER@GMAIL.COM; PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADERS EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS: 580SK, 580L, 580SL, 580LII, 580SLII, 580M, 580MII, 580MIII, 580SM, 580SM+, 580SMII, 580SMIII, 580N EP, 580N, 580SN, 580SN WT EMAIL: FRANKHORAN@ GROFFTRACTOR.COM PHONE: 800-654-USED ––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): CATERPILLAR MOTOR GRADERS, ALL MODELS LOOKING TO BUY USED CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H AND 14M. PLEASE SEND ME A PICTURE WITH DETAIL ANDASKING PRICE. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS - URGENTLY NEED CAT 916, 926, 966F AND 970F WHEEL LOADER, ALSO HITACHI EXCAVATORS EX 270, EX 400 AND 450. EMAIL: IUKANDCO@GMAIL.COM; PHONE: +923335555360 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; WE ARE INTERESTED IN BUYING HITACHI EXCAVATORS (DIGGERS) 450, 400, 270, 300, 200 SIZE. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): INTERNATIONAL MODEL FUEL / LUBE TRUCKS, ALL MODELS. LOOKING FOR 1 OR 2 FUEL TRUCKS. THEY WOULD NEED TO BE: AUTOMATIC TRANSMISSION -DECENT MILES, ENGINE HOURS -PREFERABLY MULTIPLE COMPARTMENTS -PREFERABLY INTERNATIONAL, BUT NOT A MUST -NO DPF, OR MAXXFORCE ENGINES. MAXIMUM $40,000 TO AS CHEAP AS POSSIBLE. THANK YOU. EMAIL: MANAGER@ COMMERCIALFLEETSUPPLY.COM; PHONE: 347-489-4474 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 LC-5 EXCAVATORS. WE ARE LOOKING FOR USED HEAVY CONSTRUCTION MACHINES. PLEASE OFFER US FOLLOWING MENTION MACHINES & EMAIL US DETAILS WITH PICTURES CATERPILLAR MOTOR GRADERS 140G CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966FII, 970F, 980F HITACHI EXCAVATORS EX200, EX200LC, EX270LC, EX400, EX400LC, EX300LC, EX330LC-5, EX450LC-5, EX400-5, EX60WD, EX100WD. JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM PHONE: +923332316587 ––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR 950B WHEEL LOADERS - LOOKING TO BUY CAT WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. EMAIL: NAQIB_KHAN73@YAHOO.COM PHONE: +923333298751 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR EXCAVATORS, ALL MODELS; LOOKING FOR SEVERAL CAT 330DL, 336DL, 336EL EXCAVATORS UNDER 10,000 HOURS AND WHOLESALE PRICED. EMAIL: LJEQUIPMENT3@GMAIL.COM; PHONE: 1-3309873508 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; LOOKING FOR OLDER HITACHI EXCAVATORS AND CAT WHEEL LOADERS, IN GOOD RUNNING CONDITION OR NON-RUNNING MACHINES. EMAIL US TO DISCUSS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS HITACHI EXCAVATORS – WE NEED TO BUY HITACHI EXCAVATORS ZX 200-1, ZX 330, ZX 450, ZX 650, ZX 850 EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. ALSO KOMATSU EXCAVATORS PC400, KOMATSU PC 450-6, KOMATSU PC 7506. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW, THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA600-3, WA-600-6, WA-30, WA-40, WA 50. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 ––––––––––––––––––––––––––––––––
WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM ––––––––––––––––––––––––––––––––
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 75
Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Arnegard, ND Wed., June 15, 2022 For: Retirement, 100% Liquidation, Wyatt Pipeline One • Middletown, NY Thurs., June 16, 2022 For: Farm & Construction Equipment • Atlantic City, NJ Sat., June 18, 2022 For: Late Model Rental Fleet Construction Equipment & more • Amma, WV Thurs., June 23, 2022 For: Estate Auction, Late Model Construction Equipment & more • Online Thurs., June 23, 2022 For: Late Model Construction Equipment & more (Mexico) • Dallas/Ft. Worth, TX Wed., June 29, 2022 For: Rental Fleet Construction Equipment Auction • Houston, TX Thurs., June 30, 2022 For: Very Late Model Construction Equipment & more • Canastota, NY Sat., July 9, 2022 For: Annual Barbecue & Haycamp and Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Great Plains Regional Event June 16, 2022 • Southeast Regional Event June 17, 2022 • Houston, TX June 21-23, 2022 • Great Lakes Regional Event June 23-24, 2022
• Northeast Regional Event June 28-30, 2022 • Montreal, QC July 6, 2022
Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• Atlantic Canada Regional Event BLACK STAR ACA July 8, 2022 www.blackstaraca.com 800-610-2192 • Los Angeles, CA July 21-22, 2022 • Live Virtual Auction Tues., June 21, 2022 ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • Online Ends June 20, 2022 For: Vehicles & Equipment
COMMOMWEALTH OF PA govplanet.com 855-464-4842 • Online Closes July 5, 2022 For: PennDOT Annual Heavy Equipment Auction
AUCTIONS INTERNATIONAL www.auctionsinternational.com COMPASS 800-536-1401 www.soldoncompass.com • Online Auctions 800-729-6466 May 26 – July 29, 2022 • Chattanooga, TN Wed., June 29, 2022 BAR NONE AUCTION For: June Monthly Auction www.barnoneauction.com Day 866-372-1700
• Online Only Wed., June 22, 2022 For: Heavy Equipment, Semi, Truck, Trailer Consignment Auction J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163
• Stanton, TX Wed., July 13, 2022 For: Live & Online
• Online Thurs., July 7, 2022 For: Truck & Trailer Auction
• Timed Online Thurs., June 16, 2022 For: Government Utility, Fleet Vehicles & Equipment Auction
MANASSE AUCTIONEERS www.manasseauctions.com 607-692-4540
SAMMY P AUCTION SERVICES www.sammyp.com 860-564-9400
• New Milford, PA Fri., June 17, 2022 For: Construction Equipment, Trucks, Trailers & Pipeline Equipment
• Canterbury, CT Fri., June 24, 2022 For: Homecoming Auction
• Timed Online Tues., June 21, 2022 For: Online only • Timed Online Thurs., June 23, 2022 For: Online only
JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246
• Online June 28, 2022 • Online July 5, 2022 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • Online June 15, 2022
• Las Vegas, NV June 24, 2022
• Online June 22, 2022
• Chehalis, WA June 28, 2022
• Online June 29, 2022
J.M. WOOD AUCTION COMPANY www.jmwood.com 334-264-3265 • Montgomery, AL June 14 - 16, 2022 For: 49th Annual Summer Auction
• Online June 9 - 16, 2022 For: Kenmore Heavy Equipment, Contractors Equipment & Vehicles
HUNYADY AUCTION COMPANY • Online July 7 - 14, 2022 www.hunyady.com For: Wilder Contractor Inc. 800-233-6898 • Virtual Live Wed., June 29, 2022 For: Surplus Liquidation Charles J. Merlo, Inc. • Virtual Live July 26 - 27, 2022 For: Complete Liquidation Petillo Enterprises
• Online Wed., June 29, 2022 For: Vehicles & Equipment Auction
• Evansville, IN June 24 - 25, 2022 For: Live & Online
BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO
• Marietta, PA Fri., August 12, 2022 For: Truck, Trailer & Equipment Auction
• Online Tues., June 21, 2022 For: Online (MN Lake, MN) • Kissimmee, FL Wed., June 22, 2022 For: Live & Online
• Timed Online Tues., June 28, 2022 For: Online only
• Online June 21, 2022
• Online Thurs., June 23, 2022 For: Truck & Trailer Auction
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230
• Live Online DON SMOCK Fri., June 24, 2022 For: Woodburn, OR Monthly AUCTION CO., INC. www.dsa-auctions.com Public Auction 765-778-9277 • Live Online • Pendleton, IN Sat., July 9, 2022 Fri., June 17, 2022 For: Sacramento, CA For: 30th Annual Summer Monthly Public Auction Auction • Live Online • Greencastle, IN Fri., July 29, 2022 For: Woodburn, OR Monthly Tues., July 12, 2022 For: Greencastle Heavy Public Auction Equipment Rentals HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493
• Pelzer, SC Thurs., June 16, 2022 For: Live & Online
• Online Tues., June 28, 2022 For: Online (Glencoe, MN)
MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311
• Online Thurs., June 30, 2022 For: Construction Equipment • Online Wed., July 6, 2022 For: Ag Equipment Auction
SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-676-9800
• Online Ends June 16, 2022 For: Hilltop Companies: Excavators & Rock Trucks
• Online Wed., June 22, 2022 For: Schafer Lawn & Snow Retirement Sale
• Online Wed., July 13, 2022 For: Genon Chalk Point. Power Plant Vehicles & Equipment
STEFFES GROUP INC. www.steffesgroup.com 701-237-9173
PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • Online Wed., June 15, 2022 For: Vehicles & Equipment Auction
• Timed Online June 8 - 15, 2022 For: Erickson Contract Surveying Inc. Reduction Auction • Timed Online June 17 - 22, 2022 For: Online Steffes Auction
• Online • Timed Online Thurs., June 16, 2022 For: Construction Equipment June 22 - 29, 2022 For: Construction • Online Consignment Auction Tues., June 21, 2022 For: Government Auction
JEFF MARTIN • Online AUCTIONEERS, INC. Wed., June 22, 2022 www.jeffmartinauctioneers.com For: Ag Equipment Auction 601-450-6200 • Online • Online Thurs., June 23, 2022 Wed., June 15, 2022 For: Bi-State Utilities For: Online (TX, LA & MS) Retirement Auction
WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Online Virtual Sat., July 9, 2022 For: Public Auction
Page 76 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Joey Martin Auctioneers Hosts Huge Crowd at May Auction in Carrollton, Ga.
A
huge crowd turned out for the May 27 Joey Martin Auctioneers sale at the company’s Carrollton, Ga., sale site. A vast selection of heavy earthmoving, paving, trucking, farming and transportation machines and vehicles required two rings and created some fast-paced auctioning. A tremendous online bidding presence made for an extremely productive sale. CEG
Catching the morning announcements and awaiting their opportunity to assist in their customer’s financing needs are Sean Jordan (L) and Guy Selinka of Streamline Financial Services, Atlanta, Ga.
(All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.)
Test operating a Hitachi Zaxis 120 hydraulic excavator is Rodney Bird of Bird Excavating, Moody, Ala.
A couple of the new Sunward mini-excavators in the sale lineup had independent contractor Roy Shore, based in Murphy, N.C., taking a closer look.
Many onsite registered bidders hovered around a pair of new Kubota SVL 97-2 compact track loaders, awaiting the opportunity to bid on them. Some west Georgia boys looking for a deal on some items of interest are Gene Shelton (L) of Shelton Auto Parts & Garage, Dallas, Ga., and Jimmy Jiles of JJ House Movers & Demo Inc., Bremen, Ga.
The crowds at the Joey Martin Auctioneers sales just get bigger and bigger.
Checking out some of the compact equipment about to be auctioned, including this JCB 300 eco skid steer loader, (L-R) are Dale Harris, DBC Properties, Temple, Ga.; Craig Jacobs, WesPro JCB, Douglasville, Ga.; and Landon Harris, Olive Branch Properties, Temple, Ga.
A regular seller in the Joey Martin sales, Heath Dorman (C) and his sons, George (L) and Landon of Leavellwood Inc., were auctioning a large selection of fiberglass shooting houses and deer feeders. The Eutaw, Ala.-based company is the largest manufacturer/distributor of shooting houses east of the Mississippi River.
Leading off an impressive lineup of dozers to be auctioned is a new Dressta TD-15R with warranty.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 77
Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. JUNE/JULY 2022 CRANE SAFETY COURSES June 20 – June 24, 2022 Mobile Crane Train the Trainer, Houston, TX June 21 – June 23, 2022 Rigging Inspector, Cincinnati, OH June 21 – June 24, 2022 Overhead Crane Train the Trainer, Orlando, FL June 27 – June 28, 2022 Crane Assembly & Disassembly Director, Orlando, FL June 27 – June 28, 2022 Qualified Signal Person, Houston, TX June 29 – June 30, 2022 Critical Lift Planning & Lift Director, Houston, TX June 29 – July 1, 2022 Qualified Rigger Level 2, Orlando, FL July 5 – July 7, 2022 Forklift Train the Trainer, Orlando, FL July 5 – July 8, 2022 Mobile Crane Inspector, Houston, TX July 6 – July 8, 2022 Qualified Rigger LV 2, Cincinnati, OH July 12 – July 13, 2022 Qualified Signal Person, Orlando, FL July 12 – July 14, 2022 Boom Truck Train the Trainer, Houston, TX July 12 – July 14, 2022 Aerial Work Platform Train the Trainer, Cincinnati, OH July 14 – July 15, 2022 Critical Lift Planning & Lift Director, Orlando, FL July 19 – July 21, 2022 Rigging Inspector, Houston, TX July 19 – July 22, 2022 Overhead Crane Train the Trainer, Orlando, FL July 20 – July 21, 2022 Aerial Work Platform Operator & Inspector, Cincinnati, OH To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/7104641. Email: talston@cranesafe.com ASSOCIATED GENERAL CONTRACTORS (AGC) AGC EVENTS CALENDAR: All AGC Web-Eds are scheduled in Eastern Standard Time (EST) Conferences are scheduled using the local time zone where the event takes place. Virtual Construction Supervision Fundamentals (CSF) (https://www.agc.org/learn/education-training/events/virtual-construction-supervision-fundamentals-csf-course-1) Date: Monday, June 27, 2022, 10:00 AM Training/Professional Development 2022 IT Conference (https://itconference.agc.org/) Date: Tuesday, August 16, 2022 (8:00 AM) Location: Chicago, Illinois Technology Five-Part Webinar Series: Top 10 Safest Construction Companies in America (https://www.agc.org/learn/education-training/events/five-partwebinar-series-top-10-safest-construction-companies-America) Date: Tuesday, September 27, 2022 – 3:00 PM Training/Professional Development For further information, contact AGC: Phone: 703/548-3118 Fax: 240/396-2470 Email: info@agc.org CONSTRUCTION ASSOCIATION OF MICHIGAN (CAM) Formerly Builders Exchange of Detroit and Michigan. CAM is a professional association of design and construction professionals which provides service, information, and assistance to the construction industry. Members include architects, engineers, suppliers, manufacturers, and contractors. Construction Association of Michigan 2022 Golf Season Registration is Open! Dates: July 12, 2022 - Links of Novi September 26, 2022 - Edgewood Country Club These outings are perfect opportunities to bring your staff and clients out for a great afternoon of golf! VIP TIGER GAME TAILGATE Date: Tuesday, July 26, 2022 CAM members and their guests are invited to join us for a Detroit Tigers Tailgate and evening baseball vs. the Padres. For more information on this event, contact CAM: Phone: 248/972-1000 Fax: 248/972-1001 Email: cam@buildwithCAM.com ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) (https://www.aednet.org) 2022 Leadership Development Institute What is LDI? The AED Leadership Development Institute (LDI) is a program for high-potential managers who are expected to prepare for broader organizational roles. Why LDI? LDI is the only industry-specific leadership program in the market today that takes participants out of their individual silo and encourages them to focus on the business, as-a-whole. Developed based on feedback from both distributors and manufacturers, LDI is designed to prepare the next generation of dealership leaders for upcoming roles in their dealership. This comprehensive program covers content in both the operational areas of a dealership as well
as personal leadership development. SESSION: October 12 – 14, 2022 Leading Self-Leading Others . How to have coaching conversations . Leading self and others through change Relational Capital . Building relational capital . Connecting with others – your team and your customers . Collaboration over command . Making every interaction matter Program Review . Final capstone presentations For more information on this session, contact AED: Phone: 630/574-0650 DEMING LOGGING SHOW 2022 Dates: June 11 – June 12, 2022 Location: Deming Log Show Grounds 3295 Cedarville Rd, Bellingham, WA 98226 Description: Deming Log Show is a nonprofit organization benefiting busted up loggers and their families. Home to the Annual Deming Logging Show, and other events. Originally established in 1963, our show was inspired by the need to financially assist loggers who were injured in the woods. Our grounds come alive the second full weekend in June each year for our annual Deming Logging Show with events and exhibitions to display the skills, tools, and technology used in the logging industry. A nonprofit organization, the Deming Logging Show relies on the support of local people, businesses and volunteers to support families of loggers who have been injured or killed on the job. The Deming Log Show features 31 events and exhibitions demonstrating the talents and strengths of local loggers. Don't miss axe throwing, speed climbing, log rolling, chainsaw bucking and the ironman. The show starts at 1pm each day with eliminiations starting at 11am on Saturday only. For more information on the Deming Loggings Show 2022, contact Deming Logging Show Grounds, 3295 Cedarville Road, Bellingham, WA 98226. Phone: 360/592-2423. www.demingloggingshow.com. FEDERAL CONTRACTORS CONFERENCE Date: Mon, June 20, 2022 - Wed, June 22, 2022 Place: Washington, DC (https://fedcon.agc.org/) AGC’s Federal Contractors Conference brings federal agencies directly to the table alongside attendees to generate more candid dialogue and practical information for contractors on issues specific to the federal space such as: Upcoming Projects, Forecasts, and Budgets; Executive Orders and Regulations; Legislative Changes; Contracting and Design Issues; Acquisition Updates. Who Attends: Executive, business development and proposal management personnel for design and construction companies of all sizes and at all levels of the industry involved or interested in the federal market should attend. This includes those from construction prime and subcontractors, engineering companies, architecture firms and suppliers. In addition, the conference provides excellent informational, networking and marketing opportunities for lawyers, compliance programmers, IT providers, and surety bond producers. American Institute of Architects (AIA) AIA Conference on Architecture 2022 (A’22) Chicago, IL Dates: Wednesday, June 22, 2022 - Saturday, June 25, 2022 Place: McCormick Place, Chicago, IL We are thrilled to be welcoming AIA members to our city this June for thought-provoking discussions, meaningful learning, and reconnecting with friends and colleagues at AIA Conference on Architecture 2022. The Architecture Expo We are turning McCormick Place into a 166,000 square foot product playground that reflects Chicago’s iconic cityscape. Experience, touch, see, and get technical specs for the newest high-tech materials and solutions to hit the market from 500 of the industry’s best building product manufacturers. Keynotes and Speakers AIA Conference on Architecture 2022 has a speaker lineup you won’t find anywhere else! Some of the biggest names in architecture, design, and beyond are leading keynotes, seminars, and more. Seminars: Pack your schedule! Seminars explore the topics, projects, & trends that are redefining our industry. Practicums: Develop practical knowledge and skills through nine workshop-style sessions, free with registration! Tours: Explore Chicago’s magnificent architecture through 75+ expertly curated, architect-led, one-of-a-kind tours. Expo CE: Learn about new solutions from leading building product manufacturers through 100+ sessions on the expo floor. Schedule At-A-Glance Tuesday, June 21 – Arrive in Chicago! Wednesday, June 22 – Tours & Seminars – Keynote – Opening Night Celebration Thursday, June 23 – Keynote – Architecture Expo – Tours, Seminars & Practicums – Block Party Friday, June 24 – Seminars – Architecture Expo – Tours, Seminars & Practicums – Keynote Saturday, June 25 – Tours & Seminars – Reserve Hotel for A’23 For more information on this conference, contact: American Institute of Architects (AIA) 35 E. Wacker Drive, Ste. 250, Chicago, IL 60601 Phone: 312/670-7770
Events are subject to change, check websites for updates
Page 78 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SON INC ................................................................77
KUBOTA SVL ..................................................................................63
ASCENDUM MACHINERY INC ........................................................2
LEEBOY ....................................................................................42,43
ASTEC/ROADTEC ..........................................................................39
MAULDIN PAVING PRODUCTS ....................................................40
ASV ................................................................................................67
MECALAC NORTH AMERICA LLC ................................................29
BARGAINS ......................................................................................72
MILLER FORMLESS ......................................................................35
BELL TRUCKS AMERICA INC ......................................................71
MOBRO MARINE INC ....................................................................10
BERGMANN AMERICA ..................................................................35
MOROOKA USA..............................................................................14
BOBCAT COMPANY ......................................................................57
MWI PUMPS....................................................................................22
BROOKS SALES INC ....................................................................16
NATIONAL ATTACHMENTS ..........................................................25
CAROLINA CAT ..............................................................................17
NATIONAL EQUIPMENT DEALERS (NED) ..................................25
CEG SCALE MODELS....................................................................62
NPK CONSTRUCTION EQUIPMENT INC......................................31
CLEVELAND BROTHERS EQUIPMENT CO ............................18,19
PINNACLE CENTRAL CO ..............................................................24
COMPANY WRENCH ....................................................................13
POWER EQUIPMENT CO ................................................................6
CON-EQUIP LLC ............................................................................16
POWERSCREEN ............................................................................64
CONDUIT SEARCH GROUP ..........................................................68
RICHMOND MACHINERY & EQUIPMENT ....................................50
CONEXPO-CON/AGG 2023............................................................28
RING POWER CRANE ..................................................................15
CONSTRUCTION EQUIPMENT GUIDE..........................33,36,58,74
ROSCO MANUFACTURING ......................................................46,47
DYNAPAC ......................................................................................41
SAKAI AMERICA INC ....................................................................51
E D ETNYRE & CO ........................................................................45
SANY AMERICA INC ......................................................................27
FAE USA INC ..................................................................................24
SMH GROUP-US ............................................................................15
FLANGE LOCK................................................................................23
SOUND HEAVY MACHINERY........................................................11
FLINT EQUIPMENT COMPANY - VMLY&R ....................................7
TAKEUCHI ......................................................................................69
FLUID CONTROL SERVICES ........................................................25
TORO ..............................................................................................72
GOMACO CORP ........................................................................52,53
TRACTOR TRACS INC ..................................................................56
GSE GREAT SOUTH EQUIPMENT COMPANY ..............................9
VOLVO COMPACTION ..................................................................44
HEAVY MACHINES INC ..................................................................3
WACKER NEUSON AMERICA CORPORATION ..........................61
HILLS MACHINERY COMPANY LLC ............................................80
WAINROY........................................................................................22
HITACHI CONSTRUCTION MACHINERY ....................................66
WEILER PRODUCTS ................................................................48,49
HYUNDAI CONSTRUCTION EQUIPMENT ..............................64,65
WIRTGEN AMERICA ......................................................................55
IMPACT ROLLER TECHNOLOGY INC ..........................................44 JAMES RIVER EQUIPMENT ............................................................5
GEORGIA SUPPLEMENT
JCB INC ..........................................................................................73
CENTRAL ATLANTA TRACTOR ......................................................7
JFW EQUIPMENT INC....................................................................50
COWIN EQUIPMENT CO INC ..........................................................2
JJ SCHECKEL CORP ....................................................................21
GORILLA HAMMERS........................................................................1
JOHN DEERE..................................................................................79
REYNOLDS-WARREN EQUIPMENT CO INC..................................3
JOHN DEERE SKID STEER ..........................................................70
TRACTOR & EQUIPMENT CO INC..................................................8
KOMATSU AMERICA CORP ..........................................................59
YANCEY BROTHERS CO ................................................................5
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 15, 2022 • Page 79
PRODUCTIVITY IS EASY TO ACHIEVE.
MAKE EASY WORK OUT OF CHALLENGING CONDITIONS WITH THE 460E-II AND 410E-II. With features that help eliminate guesswork and optimize comfort, operators can focus on getting more done. Like &%$##"!# " $ #" # " ! " "# "&$ ! ! $#& $ #$" !&$ "&% &" !" #" & %# "& " &#" ! & ! " $" $" #$ & $ " $ ! " & # " " $ # " # " $! " $"&%#" " # ! " # "$# # ! " Meanwhile, updated hose routings and sensors are designed to help improve uptime, and the quiet, $# $ # " " &%" $ $ " " & ! " $# "%# &# #!& &# " # & " ! " & ! " & & " temperature control system make light work out of long shifts. So you can ease your mind.
JohnDeere.com/ADT
# ! & !" $ # #!& " # " !" $ !" " "& "
Dobbs Equipment
FLINT
www.beardequipment.com
www.dobbsequipment.com
www.flintequipco.com
Mobile, AL 251/456-1993 Pensacola, FL 850/476-0277 Freeport, FL 850/835-3337 Panama City, FL 850/769-4844 Tallahassee, FL 850/575-5600 Perry, FL 850/584-9200 Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Ocala, FL 352/732-4646
Riverview, FL (HQ) 813/620-1000 Miami, FL 305/592-5740 West Palm Beach, FL 561/848-6618 Orlando, FL 407/299-1212 Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Daytona, FL 407/299-1212 Riverview, FL 813/621-4902 Pompano Beach, FL 954/977-9541 Sarasota, FL 941/960-2004
Beard Equipment Company
Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Adairsville, GA 770/773-9857 Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Braselton, GA 770/965-1889 Brunswick, GA 912/264-6161 Columbus, GA 706/687-3344 Grovetown, GA 706/855-5440
Macon, GA 478/788-1586 Savannah, GA 912/964-7370 Valdosta, GA 229/474-6680 Andrews, SC 843/221-4940 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Simpsonville, SC 864/963-5835 Walterboro, SC 843/539-1420 West Columbia, SC 803/794-9340
Page 80 • June 15, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WE’RE BUY YING WHA AT YOU U’RE SELLING Make room for new models, and put money in your pocket with a comp petitive offer given by our team on your used equipment. We e will take any machine in any condition, so contact us to get an offer now.
Ge et an Offer To Today by Giving Us a Call! QUALITY USED U EQUIPMENT FROM HILL LS MACHINERY
O P F
O P F 2012 Case SV212 84” smooth drum roller, EROPS, 2373 hours. RO7248 ..............$64,000 2019 TEREX TA300, AT5138, 857 HOURS – 3 YEAR 3000 HOUR WARRANTY ...................... ..............................................CALL FOR PRICE
O P F
2015 Casee CX210C 2 way auxiliary hydraulics, Fresh service, including new hydraulic thumb. t 2018 CASE CT7839, 1766 HOURS – bushings. pins and b TV380,EX2865.................$105,000 OPEN CAB ............................CALL FOR PRICE
2016 Terex Finlay 883+ 9.16 CY hopper, 48” conveyor, 32” middle graade conveyor, CASE CX250D/LR, 3502 HOURS – 32” fines conveyor. EX3205, CS6573................$217,700 LONG REACH ........................CALL FOR PRICE
North Carolina Asheville 828 828-820-5265 820 5265
Charlotte 704 704-208-5564 208 5564
O P F 2016 Edge TRM622 Trommel 48” feeder belt, 60” collectiion belt, 42” oversize belt, 42” radiall 2019 CX80, 750 HOURS, HYDRAULIC THUMB, fines belt, 7/8 7 function radio remote control. 24” AND .... 36” BUCKETS UNIT HAS REMAINING0 CS0276 ..........................................$202,880 WARRANTY ........................................$99,000
South Carolina Greensboro 336 336-308-3045 308 304 45
Greenville 252 252-752-7145 752 7145
Raleigh 919 919-746-7938 746 7938
Wilmington 910 910-800-2070 800 2070
©2022 Hills Machinery Co. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.
Columbia 803 803-658-0200 658 0200
Charle eston 843 22 843-22 25-9377
Greenville 864-546-5208
www.hillsmachinery.com w