M ACdverti$er
Th e
omponent
anufacturing
Don’t Forget! You Saw it in the
MISC.
Adverti$er
April 1st, 2016 #09201 Page #39
Fire is No Accident Large construction site fires have been gaining attention in the media and have resulted in large financial losses. With so much at risk, it’s essential that fire safety policies and procedures be in place at all construction sites.
2008 OMGA Finger Jointing Line Price: $29,900 NOW $24,900:: FOB CO Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, OMGA INK F-100 glue station, and TITEN finish planer of unknown age, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2010 USIFAB Roof Truss Vertical/Flat Stacker Price: $63,980 :: FOB QC Condition: Good Category: Material Handling Description: 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
In cooperation with FireforceOne, the American Wood Council (AWC) has developed three manuals and a website designed to inform developers, local building departments and fire departments on how to prevent and mitigate fire losses in buildings under construction. The manuals are developed with each of the three audiences in mind: •
Basic Fire Precautions during Construction of Large Buildings – applies to the design and planning stages, as well as the actual construction of buildings.
•
Hot Work during Construction of Large Buildings – describes best management practices of hot work, which is likely to mitigate the occurrence of large loss fires more than any other specific topic with buildings under construction.
•
Fire Department’s Role in Prevention and Suppression of Fires during Construction of Large Buildings – outlines pre-fire planning for large building projects, and prepares tactics and strategy for a fire if it occurs.
The website (www.ConstructionFireSafetyPractices.com) identifies many best management practices that were developed following an extensive literature search, placing emphasis on personal accountability of all stakeholders in the process. The intent of this website is to provide generic guidelines on best practices for maintaining fire safety and the applicability of the regulatory system, including building codes and standards, to mitigate fire loss. We invite you to visit www.ConstructionFireSafetyPractices.com. Please download the manuals, read the articles and share the information with your local developers, building departments and fire departments. We look forward to your receiving your comments on this website and its contents at fire@awc.org.
Robert Glowinski is the President & CEO of the American Wood Council (AWC).
Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt). •Pressure Pump & Vessel. •Lightly Used. •Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982