COMBINATION of J-TYPE NUT for SK & SK-P JET COOLANT SYSTEM
Please refer
Please refer P.52 Fig.3, 4, 5 for adjust screw for J-TYPE Nut & Oile hole drell
J-CAP
SK J-TYPE Nut
(for JET Coolant)
SK J-TYPE Nut
+
Prevention of swarf contamination SK J-TYPE Nut
(for GH Handle)
Style
SK 6 SK 6(P)
(High Speed)
コレット選定
SK 6-○.○ SK 6-○.○A
(for GH Handle)
OPTION J-TYPE Nut
SPANNER
(for C-Spanner)
(C-Spanner)
SKN-6WKJ (for GH Handle)
SKN-6WKJ (GH) (for C-Spanner)
SK10 SK10(P)
(High Speed)
SK10-○.○ SK10-○.○A
SKN-10KJ (for GH Handle)
SKN-10KJ (GH) (for C-Spanner)
SK13 SK13(P)
(High Speed)
SK13-○.○ SK13-○.○A
SKN-13BJ (for GH Handle)
SKN-13BJ (GH) (for C-Spanner)
SK16 SK16(P)
(High Speed)
SK16-○.○ SK16-○.○A
SKN-16BJ (for GH Handle)
SKN-16BJ (GH) (for C-Spanner)
SK20 SK20(P)
(High Speed)
SK20-○.○ SK20-○.○A
SKN-20BJ (for GH Handle)
SKN-20BJ (GH) (for C-Spanner)
SK25 SK25(P)
(High Speed)
SK25-○.○ SK25-○.○A
SKN-25BJ (for GH Handle)
5KN-25BJ (GH) ★Please refer
J-CAP(C) Coolant will be supplied from the oile hole of the drill due to sealing by O-ring around drill shank.
Jet Coolant Groove
SK J-TYPE Nut
BT
P.52 Fig.5 for adjust screw for J-TYPE Nut
WITH OIL HOLE DRILL
J-CAP Code No.
for JET COOLANT SYSTEM
J-CAP(C) Code No. for OIL HOLL DRILL
Wrench for J-cap Code No.
SKL-6W (GH Handle)
SKJ 6-3, 3.3, 4, 4.2, 5, 6
SKJ 6-3C, 3.3C, 4C, 4.2C, 5C, 6C
SKJ10-3, 4, 5, 5.5, 6, 6.2, 6.8, 7, 8, 8.5, 10
SKJ10-3C, 4C, 5C, 5.5C, 6C, 6.2C, 6.8C, 7C, 8C, 8.5C, 10C
SKJ16-7, 8, 8.5, 10, 10.3, 12, 12.5
SKJ16-7C, 8C, 8.5C, 10C, 10.3C, 12C, 12.5C
SKJL-6
GH6 (C-Spanner)
SKL-10 (GH Handle)
GH10
SKJL-10
(C-Spanner)
9HC12A (GH Handle)
GH13 (C-Spanner)
SKJL-16 9HC16 (GH Handle)
GH16
SKJ16-7, 8, 8.5, 10, 10.3, 12, 12.5, 14, 15, 16
SKJ16-7C, 8C, 8.5C, 10C, 10.3C, 12C, 12.5C, 14C, 15C, 16C
SKJ25-8, 10, 12, 16, 17.5, 20
SKJ25-8C, 10C, 12C, 16C 17.5C, 20C
(C-Spanner)
9HC22 (GH Handle)
GH20 (C-Spanner)
SKJL-25 9HC22 (GH Handle)
SKJ25-8, 10, 12, 16, 17.5, 20, 25
SKJ25-8C, 10C, 12C, 16C 17.5C, 20C, 25C
GH25
P.43 for SK Collet.
50
