2024 Brushware May-June: World Brush Expo Edition

Page 13

| P. 32 | PLUS:: 2024 ABMA Convention Coverage may / june 2024 voice of the industry for 126 years | est. 1898 Supply Chain Disruption & Chokepoints 2024 BRUSH EXPO WORLD Accelerating Growth: Industrial Brush Market

We make the world’s smallest brushes.

We’re the largest manufacturer of the world’s smallest brushes. Mill-Rose miniature brushes are available in a variety of styles and configurations as small as 0.014” in diameter to deburr, clean and ream very small holes and cavities.

We also make large brushes and custom-designed brushes. Mill-Rose has set the standard for quality, performance, and innovation in brush technology for the past 100+ years. Choose from thousands of standard and not so standard sizes and shapes. Call or visit MillRose.com.

800-321-3533 | Fax: 440-255-5039 | info@MillRose.com | www.MillRose.com
of Brushmaking Excellence
A Century

Issue #24-03

Brushware – a bi-monthly

All Set For Success

After witnessing all of the ups and downs of the Interbrush tradeshow since 2020, it is fantastic to see what looks like a wonderful new chapter developing for the brush industry with the launch of the World Brush Expo. With this first edition attracting more than 150 exhibitors, it is clear there is a strong base of global companies willing to support an industry event. Soon we will know if the attendance can also meet expectations, but with the ABMA and FEIBP driving the event going forward, it certainly seems like the Expo is set up for long-term success.

And while a prediction like that may seem a little bold, the ABMA Convention in Florida has me convinced as there was a buzz and enthusiasm in Florida that I hadn’t seen before. Having the World Brush Expo on deck seemed to put a little more energy into all of the conversations. I can’t say that everyone I spoke to is attending, but I can say it was always a topic with many ABMA attendees genuinely excited for the trip to Bologna.

From the Brushware perspective, Susan and I will both attend, and we are thrilled to have the opportunity to interact with the global brush community. We can’t wait to meet face-to-face with readers and advertisers we’ve only known through email and phone calls. And of course, we are looking forward to acquiring new readers as we know there are a lot of people that have come into the industry since 2016. No matter what, we look forward to learning from the brush industry professionals at the Expo on how we can be a better resource for the community.

Whether you are perusing this issue in advance or during the Expo, this is a jam-packed edition featuring ABMA Convention Coverage, a World Brush Expo preview and an update on the industrial brush sector from Bob Lawrence. We hope you enjoy this special edition and we also hope to see you in Bologna!

2 | www.brushwaremag.com
publication edited for key personnel in the brush, roller, broom, mop and applicator industry. Published continuously through the years, the one publication that is the spokesman for the brush and allied industries: 1898-1923,
PUBLICATION OFFICE Brushware Magazine Goodwin World Media LLC P.O. Box 7093 Overland Park, KS 66207 Tel: 913-636-7231 GENERAL MANAGER Susan Goodwin info.brushware@goodwinworldmedia.com PUBLISHER Dylan Goodwin dylan.goodwin@goodwinworldmedia.com MANAGING EDITOR Gwyneth Bowen news.brushware@goodwinworldmedia.com CORRESPONDENTS Bob Lawrence Phillip M. Perry Katharina Goldbeck-Hörz Mark E. Battersby Lisa Anderson Brushware (ISSN 00072710) (Canadian Sales Agreement Number 0650153) is published bimonthly by Goodwin World Media LLC, P.O. Box 7093, Overland Park, KS 66207 USA. Printed in the USA. Subscription: $95/year for US, Canada and Mexico. All other countries $210/year. POSTMASTER – Send address changes to Brushware Magazine, P.O. Box 7093, Overland Park, KS 66207. Copyright 2024. All rights reserved. Materials in this publication may not be reproduced in any form without permission. Requests for permission should be addressed to: Brushware Magazine, P.O. Box 7093, Overland Park, KS 66207. from the PUBLISHER
Goodwin | Publisher dylan.goodwin@goodwinworldmedia.com
called Brooms, Brushes & Handles; 1924-1947, called Brooms, Brushes & Mops, 1948-today, called Brushware.
Dylan

Countdown is on for the World Brush Expo the must-attend event for brushware professionals in 2024.

Borghi Spa provides you with the best machine solutions for the broom and brush industry.

Flexibility and Versatility, combined with Quality and Reliability at your disposal since more than 75 years. Eager to live an unforgettable experience?

Borghi Spa is waiting for you at World Brush Expo, May 22/24, 2024 - Bologna, Italy

as
Welcome.
Arrive as a guest, leave
family.
BORGHI.COM
www.brushwaremag.com | 5 Features may / june 2024 02 from the PUBLISHER 10 industry NEWS 65 economic DASHBOARD 70 brushware MARKETPLACE 71 industry EVENTS 72 advertiser INDEX the voice of our industry Departments 06 World Brush Exhibitor Directory 08 World Brush Venue Map 30 Supply Chain Disruptions By Lisa Anderson 32 World Brush Expo Preview 34 | Explore Bologna 36 | The Motor Valley 40 | Racetracks: Emilia-Romagna 42 2024 ABMA Convention Coverage 54 Industrial Brush Market Update By Bob Lawrence On the Cover Photo of Bologna's Two Towers, Asinelli and Garisenda by istockphotos/KavalenkavaVolha. Background map of Bologna, Italy, by istockphotos/Roki Rodic. Above Evening view of Bologna by istockphotos/Trifonov_Evgeniy. page 32 Guide to Bologna

World Brush Expo Exhibitors

Information from April 8, 2024. Booth #s are subject to change. EXHIBITOR

6 | www.brushwaremag.com
A.S. & C. DI MARIANO STUCCHI .................................................. 30, H23 ABMA - FEIBP ................................................................M www.abma.org / www.eurobrush.com ACE PACKAGING S.R.L 30, H17 AFC RECYCLAGE 30, H64 AGD PASTERSKI SP.K ................................................................... 30, E32 AIRSTREAM COMMUNICATION BRUSHWORK MAGAZINE 29, A26 ALLJOY TAICANG INDUSTRY CO., LTD ............................................. 30, L7 ANGLO CHINA SOURCING 30, H23 ANPING COUNTY RISING STAR HAIR BRUSH CO.,LTD 30, I37 ANPING DUAL-HORSE ANIMAL BY PRODUCTS FACTORY ............30, L33 ANHUI HUANMEI BRUSH CO., LTD 30, J48 APEX INTERNATIONAL 30, H11 APVALŪS MEDŽIO GAMINAI, UAB ................................................ 30, H15 BAYCINCO S.L. 29, D32 BAODING YINGTESHENG BRISTLE & BRUSH MAKING CO. .........30, I33 BBC CO., LTD 30, G58 BF CHINA INFO BOOTH REQUEST 30, L17 BIRLESIK FIRCA SAN VE TIC A.S .....................................................29, C9 BIZZOTTO GIOVANNI AUTOMATION SRL ............ 30, F25 www.bizzottoautomation.com BORGHI S.P.A ..................................................... 29, A33 www.borghi.com BROSSERIE LAFROGNE 30, E33 BRUSH FIBERS, INC. .......................................... 30, F45 www.brushfibers.com BRUSHEXPERT LTD M BRUSHWARE .................................................................M www.brushwaremag.com CELANESE FILAMENTS ........................................30, H1 www.celanese.com CHANGSHA YONCOL CO., LTD. ......................................................30, I55 CHONGQING GLOBAL BRISTLES MANUFACTURING CO., LTD 30, I57 CHINA (YUANTAN) INTERNATIONAL BRUSH INDUSTRY EXHIBITION 30, I13 CIXI CITY JINGCHENG MOULD CO.,LTD .........................................30, I45 CIXI JIEDA NANOMETER TECHNOLOGY CO., LTD 30, I9 COLLANTI CONCORDE S.R.L ........................................................ 29, A16 CONSR. MECC. CARNEVALI DINO S.A.S 29, B32 DECORPLAST SRL 29, C13 DKSH SWITZERLAND LTD. .................................. 30, F45 https://www.dksh.com/ch-en/home EXHIBITOR HALL, BOOTH # DUDA PLUS SP. Z.O.O 29, D3 EANG LIAN CORPORATION 30, G55 EDWARD JACKSON ENGINEER LTD .................. 30, G13 www.edwardjacksonltd.com EPIC RESINS 30, H21 EVERCUP METALS CO., LTD. 30, I35 F.LLI DALLE CRODE SRL ................................................................ 29, B9 FASS SPA 29, A3 FILKEMP - INDUSTRIA DE FILAMENTOS, S.A .... 30, I16 www.filkemp.com FIMM ITALIA SPA .......................................................................... 29, C27 FITLENE SL 30, H10 FOSHAN CHAOSHENG AUTOMATION EQUIPMENT CO., LTD 30, J50 FRANK BÜRSTENDRAHT GMBH .................................................. 30, H36 G.A GROUP PRODUKTION UND HANDEL GMBH 30, F45 G.D.F S.R.L UNIPERSONALE ........................................................ 29, B27 GAOZHOU GUANGYU NEW MATERIAL WEAVING CO., LTD 30, J36 GB BOUCHERIE NV .............................................30, E64 www.boucherie.com GEBRUDER ERFURTH OHG 30, F45 GIORI AUTOMATION ...................................................................... 30, H30 GIUDICI ENRICO & C. SNC 29, D27 GOCEAN INTERNATIONAL SUPPLY CHAIN CO., LTD.....................30, L53 GOLDEN HORSE FOR PLASTIC 29, D11 GOLWOOD 30, E30 GOVER HOROWITZ & BLUNT LTD ................................................ 30, E12 GUANGDONG JUSOU FILAMENT TECHNOLOGY CO., LTD 30, L21 GUANGZHOU NANSHA MINGWANG SYNTHETIC FIBER FACTORY 30, I53 GUANGZHOU TAIBO AUTOMATIC EQUIPMENT CO., LTD .............. 30, J34 HANS SCHUHMANN GMBH & CO KG 30, E39 HASKIL PLASTIK ........................................................................... 30, E41 HENAN GUSHI GUOLUTAN BRISTLE PROCESSING FACTORY 30, L31 HP-INDUSTRIAL 30, L12 INDEUTSCH ................................................................................... 30, H55 ITZU PAINTING TOOLS 30, E18 LADY V 30, E6 LANXI HANSOM BRUSH MANUFACTURES CO., LTD .................... 30, J38 LEISTNER WERKZEUG GMBH ............................30, E59 www.leistner-gmbh.de LOEWERT INDUSTRIES 30, G38 LOVEMARK............................................................................................... M JIANGSU DONGXING BRISTLE BRUSH CO.,LTD 30, L15 JINAN DONGXIN WOOD PRODUCTS CORP. 30, J56 JINXIANG BRISTLES INDUSTRIAL CO., LTD .................................... 30, L1 KARL B. KUMPE GMBH 30, H23 KIRPAL BRUSH PVT LTD KPT CNC TECHNOLOGY CORPORATION 30, J60 MAGNI GIOVANNI SNC DI ALBERTO E FRANCESCO MAGNI 30, E34 MAPEI ............................................................................................... 29, A9
HALL, BOOTH #
2024 World Brush Expo

Information from April 8, 2024. Booth #s are subject to change.

www.brushwaremag.com | 7 EXHIBITOR HALL, BOOTH # MAPEL SPA ................................................................................... 30, G39 MARCEGAGLIA - OSKAR 29, B17 MARCO KRACHT 30, G11 MARK SAMUEL TRADING ........................................................... 30, H23 MASAN CO., LTD 30, G21 METALSTIK SRL 29, C11 MGG SRL ............................................................. 29, A18 www.mggmeccanica.com MILEVA SRL 29, B27 MINELLI S.P.A A SOCIO UNICO 29, B3 MOISSONIER - BRIGAUD ................................................................ 30, H6 MONAHAN FILAMENTS ....................................... 30, F45 www.monahanfilaments.com MONTEREY MILLS 30, E31 MOPS ............................................................................................ 30, H52 NERI GEOM. ALESSANDRO & C.S.A.S 29, A31 ONB HARDWARE CO., LIMITED 30, L55 OZKIL PLASTIK FIRCA VE KIL LTD. STI......................................... 29, C31 P.B.M SRL 29, B4 PG GROUP 30, E21 PERLON GMBH .................................................... 30, F40 www.perlon.com PHARAOH FIBER 29, C21 PIONEER BRUSH COMPANY 30, H23 PLASTICFIBRE S.R.L ..................................................................... 30, G69 PMM, PROVEEDORA MEXICANA DE MONOFILAMENTOS SA DE CV ..................... 30, G57 www.pmmbrightline.com POGLIANI SRL .................................................................................30, I52 POLI FRATELLI FRANCESCO E ATTILIO E C SAS 29, C3 POLO TRADING 30, H51 PRESMA S.P.A ............................................................................... 29, C10 PROMAT 30, H33 QIDONG BOWEN ENGINEERING PLASTICS CO., LTD................... 30, J42 QINGDAO JINFUXIN PLASTIC MACHINERY CO., LTD 30, J40 RACHELLI ARISTIDE S.R.L 29, D12 ROTH COMPOSITE MACHINERY GMBH .............30, E15 www.roth-composite-machinery.com ROTHLAENDER & CO GMBH .........................................................30, I26 S. DINI SRL 29, B10 S.T.P SOCIETA’ TRASFORMAZIONE POLIMERI SRL .................... 30, H35 SCM AUTOMATION SRL 29, B12 SELEHDAR FIBER 29, C32 SHARPER INDUSTRIES (INDIA) PRIVATE LIMITED ...................... 30, E42 SHENZHEN TIDE FILAMENTS CO., LTD 30, I46 SHIJIAZHUANG DONGMEI BRUSH CO., LTD 30, L39 SHIJIAZHUANG GOLDEN HARVEST INDUSTRIAL ........................... 30, L3 EXHIBITOR HALL, BOOTH # SUIZHOU LONGXIN BRISTLE BRUSH CO., LTD .............................30, L53 SIBO 30, I22 SICHUAN CHUNGKING BRISTLES TRADING CO., LTD. 30, J46 SICHUAN CHUANHU BRISTLE COMPANY ....................................30, L35 SICHUAN GOOD LUCK BRISTLE PRODUCTS COMPANY 30, L51 SIMA SRL 29, D21 SOCIETE SAID METAL STICK CO .................................................. 30, H29 SOVB - OUEST VENDEE BALAIS 30, G42 SPIVAL S.P.A.................................................................................. 30, G33 STH WIRE INDUSTRY (M) SDN BHD 30, E8 SUPREME FILATECH 30, G9 SZCZOT-MET ................................................................................. 30, E10 TAI HING NYLON FILAMENT PRODUCTS CO. ...... 30, L9 www.taihingnylon.hk TAIXING XUEZHONG BRISTLES&BRUSHES CO., LTD 30, J58 TAIZHOU HONGYUE MACHINERY CO., LTD. ..................................30, L45 TAIZHOU HUANGYAN ZHONGXIN PLASTIC CO., LTD 30, I27 TMI SRL TRAFILERIA FERRO ACCIAIO 29, A17 TRE COLLI ....................................................................................... 30, L2 UNIMAC S.R.L 29, A33 VENETA SETOLE CRINE 30, E2 VIPLAST SRL ................................................................................. 29, B31 WARNA EXPORTERS (PVT) LTD 30, E16 WIMMER GMBH ........................................................................... 30, H35 WÖHLER BRUSH TECH GMBH ............................ 30, E1 www.woehlerbrushtech.com YANGZHOU HAIXING BRUSH MACHINE CO., LTD 30, I21 YANGZHOU HENGYUE BRUSH CO., LTD 30, L57 YANGZHOU IBRUSHTECH PRODUCTS CO., LTD ........................... 30, J28 YANGZHOU JIANGDU LONGTENG BRUSH FACTORY 30, I47 YANGZHOU JIANGDU SHENGLONG PLASTIC PRODUCTS ...........30, L23 YANGZHOU JIANGDU YUANDONG BRISTLE & LEATHER 29, D15 YANGZHOU JINGDU BRUSH CO., LTD 30, L27 YANGZHOU KAIYUE BRUSH MACHINERY CO., LTD. .................... 30, H45 YANGZHOU WANTONG ANIMAL BY - PRODUCTS CO., LTD 30, L47 YANGZHOU WENFENG PAGODA BRISTLES & BRUSHES CO. 30, J52 ZHANGZHOU HENGYU AUTOMATION TECHNOLOGY CO., LTD .....30, L29 ZHEJIANG ALEAD TECH CO., LTD 30, J54 ZHEJIANG G&F FOREIGN TRADING CO., LTD. ............................. 30, H51 ZHEJIANG LIJIALONG BRUSH CO., LTD 30, L41 ZHONGCHANG (TIANJIN) COMPOSITE MATERIALS CO., LTD 30, I39

Information from April 8, 2024. Venue map and booth #s are subject to change.

8 | www.brushwaremag.com North Entrance Aisle D Aisle C Aisle B Aisle A 29 30 Aisle D Aisle C Aisle B Aisle A 29 29
World Brush Expo Venue Map
2024 World
Brush Expo

Information from April 8, 2024. Booth #s are subject to change.

www.brushwaremag.com | 9 Aisle L Aisle H Aisle G Aisle E Aisle I Aisle F 30 30 North
Entrance

Notice of Merger by Incorporation of Unimac s.r.l. in the Company Borghi S.p.A.

Borghi S.p.A. announces that it has acquired the company Unimac s.r.l. by incorporation. Unimac s.r.l. since 1983 has designed and built complete lines to produce metal handles. It has also specialized in the design and construction of machines and automation for the production of power brushes.

The incorporation operation is part of the broader process of corporate redefinition of the group headed by Borghi, aimed at simplifying its structure and better enhancing its operational, administrative and technological synergies. The merger will in fact make it possible to complete the concentration of the activities carried out by Unimac directly under the Borghi company, allowing not only a rationalization and optimization of decision-making levels, resource management and structural costs, but also an elimination of duplications and overlaps of accounting, fiscal and administrative duties. This project is the natural evolution of a partnership already existing for more than 10 years, during which important synergies have been created between the two companies.

“This is a moment of great importance for us, which establishes the strategic objectives defined already in the acquisition phase,” says Paolo Roversi, President of Borghi S.p.A. “A final step, the merger, which we wanted to make happen in the shortest time possible, to demonstrate our aptitude for rationalization in terms of management and cost savings and to present ourselves to the national and international market with a well-defined corporate identity, thanks to the contribution of the specific and complementary Borghi and Unimac expertise.”

“The acquisition of Unimac by Borghi in 2019 was an effective step to give a concrete future to the Unimac product lines, which expand the range offered by Borghi. With today’s incorporation not much has changed for us at Unimac, we have only moved to the Borghi location while keeping the workforce and roles unchanged, and we have become part of the Borghi family in all respects with the aim of serving the global market by always trying to offer the best technology and services, the hallmark of the Borghi team”, says Davide Ori, General Manager of Unimac S.r.l.

For more information about Borghi S.p.A., please visit their website at www.borghi.com.

CONNECT WITH US

industry NEWS industry NEWS brushwaremag brushwaremag Brushware Magazine www.brushwaremag.com
10 | www.brushwaremag.com

Brushtec’s New High-Performance Steel-bristle Sweepertec Brush

Brushtec has launched an exciting new product within their Sweepertec range, the Sweepertec Steel. Made in Britain from ultra-stiff steel wire bristles rather than plastic, the Sweepertec Steel is a powerful fast-change fork attachment for the heavy-duty cleaning of yards and sites.

The Sweepertec Steel uses 55 percent more bristle than the next competitor. Sixteen rows of 3.3 × 0.6 mm patented steel wire bristle provide an extremely dense and strong brush, and the bristles are arranged in a chevron pattern that helps to collect even small debris. The brush also features non-marking HDPE wear edges, enabling the sweeper to brush debris close to walls without damage.

This British-made steel bristle forklift brush is the only one on the market to come as a one-piece, highly durable brush back. With no rows of flimsy bristles bolted together, the Sweepertec can provide excellent performance in whatever scenario and conditions it finds itself. The Sweepertec steel is also a self-supporting brush, so there’s no need to chock the brush in between uses — simply place it down until next required.

The frame is fabricated from high-grade steel which is then hot-dipgalvanised, providing resistance to corrosion and protecting it from harsh environmental conditions. Hot-dip galvanizing also gives steel the ability to self-heal scratches to its surface, and the brush’s highly durable, heavyduty, welded steel chassis has no moving parts to break, further extending the lifespan of this product.

“With the Sweepertec Steel we have produced the best quality, and value, steel-bristle forked vehicle brush possible. With its high performance and ease of use, this brush will allow you to get any sweeping job done swiftly, giving you more time to work through your other tasks,” says Barry Crackett, Product Designer at Brushtec. “Sweepertec Steel brushes are manufactured right here in the U.K., and we work very hard to ensure that they are always in stock and available for purchase. Between the excellent quality of the steel bristle and the high brush density, these brushes should last an extraordinarily long time.”

The Sweepertec Steel measures 2000 mm (79") in length x 580 mm (23") in width x 400 mm (16") in height, with a total weight of 200 kg. Built in Britain from British components, it can be purchased on the Sweepertec website for £1,587.00 (excluding VAT). Replacement brushes are also available.

The Pulse

INTERCO S.A. Named Official Agent for GB Boucherie in Mexico

GB BOUCHERIE NV is pleased to announce that INTERCO S.A. is now its official agent in Mexico, effective March 1, 2024. Boucherie and Interco share a common goal of providing excellent service to all Mexican companies in the industry, building on the good reputation and vast know-how of both companies.

The statement from Boucherie says, “We believe that this alliance will allow us to provide existing and new customers with the best possible experience. Boucherie’s Andres Becker and Interco are looking forward to working with you!”

For more information about Boucherie, visit www.boucherie.com.

The Inspired Home Show 2024 Changes Spur Growth

The Inspired Home Show 2024 wrapped on March 19 at McCormick Place in Chicago after three highly productive days. The Show featured 1,648 exhibitors from 38 countries. Nearly 30,000 home + housewares professionals from over 120 countries came together to discover new products, connect with colleagues and advance the industry.

“The 2024 Show built on the success of last year’s Show with total square feet of exhibition space being slightly higher. The change to the format was very positive, making the Show incredibly efficient — moving between the three primary Expos, now consolidated into two halls rather than three, was very well received by both exhibitors and buyers,” says Derek Miller, president and CEO of the International Housewares Association.

The Inspired Home Show 2025 will take place March 2-4, 2025, at McCormick Place in Chicago.

EISENWARENMESSE 2024 Wrap Up

Following four days of bustling activity, the EISENWARENMESSE — International Hardware Fair concluded its 2024 edition on Wednesday, March 6, 2024. Held in Cologne, Germany, from March 3-6, the event marked a triumphant return to its traditional March timeframe after a special edition in the autumn of 2022. Renowned as the premier global platform for the hardware industry, the fair drew over 3,200 exhibitors from 54 countries, showcasing the latest trends and innovations across various sectors including tools and accessories, industrial supply, fixing and fastening technology, building supplies and home improvement.

“We are highly satisfied with the EISENWARENMESSE — International Hardware Fair 2024. Our supporting program went down very well and all of the exhibiting companies praised the excellent quality of the visitors,” says Oliver Frese, Chief Operating Officer of Koelnmesse GmbH. “The trade fair underpinned its relevance as the key meeting point for industry trends and product innovations not least with formats like the popular EISENaward. The positive response and the return of many companies confirm the March date fits in perfectly with the innovation cycle of the industry.”

www.brushwaremag.com | 11

YOUR BRUSH DESERVES THE BEST FILAMENTS CELANESE FILAMENTS CONTINUES TO L EAD THE WAY IN INNOVATIVE SOLUTIONS

For more than 80 years, Celanese Filaments, formerly owned by Dupont, has been recognized as a leader in innovative synthetic filaments that enable brush manufacturers to address emerging trends and meet evolving consumer expectations.

HEALTH DESERVES THE BEST FILAMENTS

- TOOTHBRUSH FILAMENTS

The most important component of a toothbrush lies in the bristle. With outstanding industry expertise accumulated over the years, coupled with our proven technologies, Celanese Filaments is dedicated to the oral care brush industry with our nylon solutions under the brand names of Celanese Tynex®(nylon 612) and Celanese Herox®(nylon 610). Leading toothbrush brands and manufacturers are able to produce very high quality brushes with a balance of consistent quality, wear performance and unmatched productivities in tufting and end-rounding by using Celanese filaments. As consumer trends in toothbrush are increasingly focused on the six major areas of 1) Visual Attractiveness, 2) Interdental Cleaning, 3) Plaque Removal, 4) Gum Comfort, 5) Gingival Cleaning and 6) Anti-microbial within the filaments, Celanese Filaments has been working closely with the leading global brands in oral care as well as toothbrush manufacturers by fulfilling these needs with our broad range of innovative products in the portfolio

BEAUTY DESERVES THE BEST FILAMENTS

- FINE FILAMENTS

Celanese Natrafil® filaments, a pioneering filament from Celanese’ s unique polyester based material, contain proprietary texturizing additives that create a structured surface that mimics animal hair. Natrafil® filaments offer a synthetic alternative to animal hair in premium cosmetic powder brushes with more consistency in the bristle while maintaining the touch-and-feel of premium animal hair. Studies have shown that brushes made with Natrafil® filaments have equal to superior pickup and release performance versus brushes made with animal hair.

EFFICIENCY DESERVES THE BEST FILAMENTS

– ABRASIVE FILAMENTS

Like most industries, steel manufacturers are always looking forsquare feet of metal through the mill, cleaned and coated faster

than ever before. To accomplish this, steel mills are using more aggressive cleaning solutions. The problem is that the cleaning brushes typically used were quickly degrading because many plastics used in the brush filaments can’t handle the solutions of the extreme PH. The technical resources at Celanese Filaments were able to help solve the problem by adding stabilizers to one of our nylon polymer formulations, effectively extending the pH range where these filaments can be used. Brushes made with our filaments deliver cleaning performance for a longer life, helping over an improved service life, helping steel manufactures to achieve higher productivity.

Another need voiced by customers is higher aggressiveness in metal finishing applications. Celanese Tynex® A filaments, a family of ceramic grit-containing filaments, was developed to meet this need.

CREATIVITY DESERVES THE BEST FILAMENTS – PAINTBRUSH FILAMENTS

When manufacturers began changing their paints to water-based formulations, more people began using paintbrushes made with synthetic bristles because the hog bristles traditionally used in paintbrushes lost stiffness in water-based paints. Synthetics such as Celanese Tynex®, Celanese Chinex® and Celanese Orel® brand filaments quickly became popular choices. As paint manufacturers continue to improve their water-based formulations by reducing volatile organic compound (VOC) content, increasing solid loadings and decreasing drying times, there is an ongoing need for increasingly higher performing brushes. To meet this need, Celanese Filaments continues to innovate and help customize solutions. For example, we developed filaments with stiffer crosssection that can push higher viscosity paints more efficiently. We also changed the shapes of the filaments so that they not only pick up more paint from the can for faster application, but are easier to clean.

Recognition for being the global leader in filaments comes from our customers. You inspire us to make a difference in the world. We will continue to advance our innovations because we believe your BRUSH deserves the best FILAMENTS. 1-800-635-9695 | www.celanese.com

YOUR BRUSH DESERVES THE BEST FILAMENTS

New Blue Monster

LUBE-JOB Pipe Joint Lubricant

New Blue Monster® LUBE-JOB Pipe Joint Lubricant Formulated for Push-on Pipe Joints with Gaskets

Blue Monster® LUBE-JOB, a superior pipe joint lubricant that simplifies the assembly of all types of pipelines (especially potable water systems) without swelling gaskets, is now available from Clean-Fit Products, a division of The Mill-Rose Company.

LUBE-JOB is formulated from a biodegradable blend of lubricity enhancers and soaps creating a unique lubricant that flows into cavities when mating abutting pipes, effectively sealing joints. Its soft, creamy formula spreads on easily to give superior lubrication, performing well in extreme temperatures from -10° F to 150° F.

LUBE-JOB is petroleum and phosphate-free – a special low-VOC blend of raw materials common in the lubricant and soap industries. LUBE-JOB dissipates and will not leave a residue when flushed in accordance with recommended AWWA procedures. It will not irritate the skin, is non-toxic, and cleans up easily using soap and warm water. Blue Monster LUBE-JOB is certified to meet NSF / ANSI Standard 61-G for potable water pipelines. NSF’s use of strict analytical standards for formulating consistency assures the production of a safe lubricant for water pipe joining requirements. In addition, LUBE-JOB is FBC system compatible.

“LUBE-JOB simplifies assembly of push-on pipe joints with natural or synthetic rubber or plastic gaskets. Its biodegradable,

Blue Monster® LUBE-JOB pipe joining lubricant is available in a two-pound container and sold at leading PHC supply houses. Blue Monster Products are offered exclusively by Clean-Fit Products, a division of The Mill-Rose Company. The Mill-Rose Company is the world’s leading supplier of PTFE thread sealants and the largest U.S. manufacturer of twistedin-wire brushes used in virtually every type of industry throughout the world. Mill-Rose is a family-owned organization now in its fourth generation. The organization has experienced significant growth from its humble beginnings in 1919. Today it operates manufacturing and warehouse facilities throughout the United States and Mexico, with over 100,000 square feet of production facilities in the U.S. and Mexico, complemented by a 70,000 square foot U.S. distribution center with a 42,000 sq. ft. expansion in process.

For further information contact Clean-Fit Products, 7310 Corporate Blvd., Mentor, Ohio 44060. Telephone 1-800-3213598, fax 1-440-255-1072, e-mail info@cleanfit.com or visit www.cleanfit.com.

We are proud to be exhibiting at the World Brush Expo 2024

Visit us in Hall 30 Stand G13 to see our exciting range of winding and finishing machines in action!

industry NEWS
14 | www.brushwaremag.com

BrushBoxx Wins GOOD DESIGN Award for Cable Management Solution

The young company BrushBoxx, based in Hochdorf, Germany, is delighted to have received the international GOOD DESIGN Award 2023 from the Chicago Athenaeum Museum for Architecture and Design for their BrushLock cable entry system. The product is specially developed for data centers and reliably seals cable entries to improve cooling and energy efficiency in data centers.

In collaboration with the renowned design team from Ammerbuch, the focus was not only on the technical property rights but also on developing a holistic appearance from the lettering to the packaging. The innovative functional integration of assembly aid, handling and additional closure options ensures a well-thought-out customer benefit and thus stands out from previous solutions on the market.

André Fischer, Head of the Data Center division, is delighted with the response from customers. He says, “This unique product has been well received by our international customers, who not only expect a technically sophisticated product but also appreciate the user-friendliness supported by the design.”

BrushBoxx, founded in 2022 and certified according to DIN ISO 9001, offers brush solutions that are already used in data centers, agricultural machinery and wind turbines of well-known companies throughout Europe. State-of-the-art machinery and a high level of vertical integration ensure fast and flexible implementation of customer requirements.

BRUSHWARE DIGEST

Stay up to date with the world leader for brush industry news and get notifications for each issue of Brushware magazine digital issues.

www.brushwaremag.com/enewsletter

www.brushwaremag.com | 15

Boucherie to Showcase Anchorless Toothbrush Technology

The former worldwide event for the oral care brush industry, held in Freiburg, has been discontinued. Instead, a brand new fair called the World Brush Expo is organized by the American Brush Manufacturers Association and the European Brushware Federation. From May 22-24, 2024, manufacturers of various types of brushes from all over the world will unite in the BolognaFiere venue in Bologna, Italy. This is a mustattend event for professionals in the brush industry, where Boucherie will be presenting exciting new, industry-leading toothbrush machinery.

Anchor

Boucherie’s proprietary PTt technology remains on the cutting edge of anchorless toothbrush manufacturing. When it was introduced at the Interbrush show in 2016, it stunned the world and the oral care industry showed massive interest.

Simple as a technology yet allowing for elegant brush head designs with flexibility in materials, PTt has been re-engineered for more output, engineering simplicity, higher product quality and superior efficiency. See the new and improved PTt machine at the World Brush Expo in May along with the following:

Anchorless technology: Two entirely new machines will be revealed!

Anchor technology: Demonstration of the latest Hepta developments.

Interdental: Discover a brand new feature for unsurpassed quality on IDM.

To learn more about Boucherie at the 2024 World Brush Expo, visit www.worldbrushexpo.boucherie.com.

Interdental: Discover a brand new feature for unsurpassed quality on IDM.

industry NEWS
Two entirely new machines will be revealed. Technology: Demonstration of the latest Hepta developments.
16 | www.brushwaremag.com
www.brushwaremag.com | 17

FEIBP Congress: Unveiling Ibiza’s Natural Wonders Plus A Peek at The Keynote Speaker

As we edge closer to our congress in Ibiza, it’s time to take a moment to appreciate the stunning natural landscape that surrounds us – not just the beautiful beaches, but also the lush countryside and hidden coves that make Ibiza a paradise for nature lovers. Ibiza may be famed for its vibrant nightlife, but it’s also a haven of natural beauty waiting to be explored. From the rustic charm of its pine-clad hills to the crystal-clear waters hugging its coastline, Ibiza offers a tranquil backdrop to our bustling congress schedule.

Meet Our Keynote Speaker: Araceli Segarra

In a delightful contrast to our serene island setting, we are thrilled to introduce Araceli Segarra – an extraordinary mountain climber, the first Spanish woman to reach the summit of Everest and a prolific author. Her book, “Not That High and Not That Difficult,” mirrors the challenges we face, whether scaling towering peaks, navigating the complexities of business or forging strong partnerships. Segarra will guide us through mastering the seemingly insurmountable, reminding us that “no man/company is an island,” perfectly embodying

the theme of our congress. Her insights promise to inspire and elevate our perspectives on overcoming challenges and enhancing cooperation.

Reminder: Complete Your Reservations

Secure your spot at this unprecedented gathering:

• Book Your Congress Spot: FEIBP Congress Registration

• Secure Your Stay: Ensure your accommodations by visiting the FEIBP Congress Hotel webpage. Booking through other platforms like Booking.com will result in higher rates.

A Congress Like No Other

Prepare to be captivated by Ibiza’s enchanting natural beauty and to be inspired by stories of resilience and teamwork from one of the world’s most accomplished climbers. This congress is not just an event; it’s an experience that will challenge, motivate and unite us. Looking forward to exploring both the heights and depths of what we can achieve together in Ibiza.

—Alessandro Acquaderni, President, FEIBP

industry NEWS
18 | www.brushwaremag.com
the World of STRIP BRUSH MACHINES Discover all worlds of brush machines! bt.woehler.com the World of Brushmaking Machines Visit us in Hall 30 Stand E1

Borghi USA Strengthens Team with Rob Wilson as New Field Service Technician

Borghi USA, Inc., proudly announces the addition of Rob Wilson to its team as the new Field Service Technician. In his capacity, Wilson will play a crucial role in supporting customers by providing expertise in troubleshooting, machine repairs, installation and training, both onsite and remotely. Additionally, he will collaborate closely with the Borghi –Italy engineering team, contributing to the development of new equipment.

Keystone Plastics Welcomes Terry Parsons

In January, Keystone Plastics announced Terry Parsons as the company’s new sales/business development executive. In his role, Parsons will focus on managing business relationships, driving sales growth and building and maintaining distribution programs. His responsibilities involve providing client support, developing new product and business opportunities and actively participating in marketing and events to promote the KPI brand.

Parsons is a highly accomplished senior executive with a dynamic background in developing and implementing transformational strategies aimed at propelling revenue, optimizing operations and fostering sustainable organizational growth. He brings a proven track record of aligning highperforming teams with corporate vision, forging valuable partnerships and delivering tactical roadmaps for business value.

“We’re genuinely excited to welcome Terry to our team! His extensive industry knowledge, stellar reputation and positive attitude are valuable assets that will contribute to our growth and enhance the support we provide to our customers,” says Mike Santos, Director of Sales and Marketing.

Parson’s career highlights include successful tenures as General Manager at Alamo Group Inc. and Chief Operating Officer at Heil of Texas, where he played pivotal roles in transforming operations, driving growth, and instilling a high-performing culture. His professional journey is marked by achievements including tripling company revenue, revitalizing sales efforts, and implementing strategic initiatives that have left a lasting impact.

industry NEWS
20 | www.brushwaremag.com
PEOPLE

Edward Jackson: 1944-2024

In fond remembrance, we celebrate the life of Edward Jackson, the visionary founder of Edward Jackson (Engineer) Ltd, who passed away in March. The son of a model engineer, Edward had an innate creativity and imagination that led to several early inventions, including a ‘pilfer-proof’ picture mounting for hotels and a self-extinguishing litter bin, which even resulted in a brief television appearance.

It was his other lifelong interest, music, that led him into the brush industry. In 1968, while singing in a local choir, Edward crossed paths with the factory manager of the Briton Brush Company, who commissioned Edward to create a paintbrush knot-picking machine. This was followed by a series of machines Edward developed for the firm, including the first prototype paint roller-making machines.

In 1977 Edward married Rachel, and with her business skills together they founded Edward Jackson (Engineer) Ltd the following year.

Edward’s first paint roller machine — the GW1 winding machine — was demonstrated at the inaugural InterBrossa exhibition in Freiburg, Germany. The company has exhibited machinery at every show since, continuing the tradition with the World Brush Expo this year in Bologna.

From the 1980s until his retirement, Edward continued to innovate, securing patents for several groundbreaking machine designs, including the continuous winding process and cutting-edge finishing systems. The help of Rob Coleman, who served as the company’s global sales representative, enabled worldwide dissemination of Edward’s machines, leaving an indelible mark on the global market.

business after graduating in 2001. In the following years, they worked together, with Tim absorbing Edward’s unique design style and approach to engineering quality. Tim continues to develop the company, staying true to Edward’s principles and commitment to innovation by incorporating the latest design and manufacturing techniques.

Inspired by his father’s love of engineering, Edward’s eldest son, Tim, joined the family

It is a testament to the originality and enduring value of his ideas that Edward Jackson (Engineer) Limited continues to thrive, crafting successful paint roller machinery derived from Edward’s pioneering designs.

Beyond his professional endeavors, Edward’s life was enriched by his passions for music and architecture. His dedication to choral singing and conducting remained a source of joy and solace throughout his life, while his family provided the bedrock of his inspiration and support.

In his later years, Edward faced the challenges of progressing dementia with resilience and grace. Though his passing may have been sudden, it was not entirely unexpected. His family is consoled that he was surrounded by friends and family for his 80th birthday just days earlier.

Donations in Edward’s memory can be made through edward-jackson-1944-2024.muchloved.com in aid of Sing Your Heart Out and Dementia Adventure.

industry NEWS
22 | www.brushwaremag.com
Edward Jackson in 1980

Global Shop Solutions: Pinaire Achieves 20-Year Milestone

One of the most important aspects of ERP software for manufacturers is the stability of the software provider. Global Shop Solutions, a family-owned ERP provider for almost 50 years, is proud to recognize Chris Pinaire, MBA, Director of New Implementations, for his 20 years of dedicated service to the manufacturing industry.

Pinaire began his career with Global Shop Solutions as a customer service representative. With his background in management information systems and keen problem-solving abilities, he was quickly promoted to helping manufacturers successfully implement ERP software and consulting with existing customers to simplify their manufacturing processes. After several years as a senior consultant, Pinaire was elevated to his current position where he has had a significant impact on the manufacturing industry.

“Chris is smart, hardworking and constantly looking for ways to make the implementation process faster and easier,” says Dusty Alexander, Global Shop Solutions President and CEO. “He manages a team of more than 70 implementation specialists, who average a 95 percent success rate for new implementations. His commitment to excellence makes us better every day.”

Pinaire attributes his tenure at Global Shop Solutions to the work, the people and the satisfaction of helping manufacturers solve problems and find the best solutions for their businesses.

“The work is interesting and challenging,” says Pinaire. “There’s never a dull moment, and I love the people I work with. We operate as a unified team and always support each other to find the best solutions for our customers.”

“I also admire the way Global Shop Solutions grows its people internally,” adds Pinaire. “Keeping people interested requires having a path for them to grow. Five, 10 or 15 years ago we didn’t have a lot of positions that exist today. Adding new positions as the business grew provided a path to keep our employees hungry and growing, playing a key role in the stability of our workforce.”

www.brushwaremag.com | 23

Wöhler Brush Tech Unveils Innovative Solutions at World Brush Expo 2024

Wöhler Brush Tech, a leading provider of brush production machinery, is excited to participate in the highly anticipated World Brush Expo 2024. This global event will serve as a platform for the industry to showcase its latest innovations and product highlights directly to customers. On Stand E1 in Hall 30, attendees can expect to explore Wöhler’s diverse array of cutting-edge solutions, including:

Roll and Spool Your Own Flat Wire!

Wöhler introduces a comprehensive line enabling companies to effortlessly roll and spool their own flat wire. The renowned FWR 250 flat wire rolling machine rolls the wire flat with a thickness tolerance of just +/- 0.01 mm. The accompanying FWW 250 cooling unit facilitates continuous cooling of the wire, while the DC 510 wire winder enables rapid spooling at speeds of up to 240 m/min. A crane is integrated into the DC 510 for easy handling of the spooled wire with up to 400 kg on cardboard cores or optionally on metal spools.

Virtual Reality Experience for Road Sweeper Brush Production

Step into the future with Wöhler’s virtual reality showcase, offering an immersive journey into the full range of production machines for street sweeping brushes. Walk around machines for the production of street sweeper roll brush segments like the PVM 100 or gutter brooms and segments like the high-speed GB 100. Take a closer look than it would ever be safe to in reality. Witness the unveiling of the new Wöhler gutter broom machine GB 50, a simple and low-priced entry into the automated production of gutter brooms and segments incorporating an industrial robot to move segments or plates during drilling and filling.

SBM 840 Strip Brush Machine With the Highest Level of Automation

Wöhler will be presenting the SBM 840 strip brush machine with the BUD 300 automatic bundle feeder and the BLS 700 wheel picker for even and fast separation of various natural and synthetic materials. At the same time, the SBM 840 is equipped with the new DSA 500 wire strand laying device processing wire strands from spools. New features of the SBM 840 are the continuous monitoring of the profile width ensuring perfect fitting of the profiles into their holders and the brush height monitoring. One of the highlights is the new filament density closed-loop control which ensures permanent quality control of the brush density and relieves the operator.

24 | www.brushwaremag.com
machinery
SPOTLIGHT

New Online Portal for Customer Service

Wöhler presents a new customer service portal that provides all the necessary machine data quickly and easily when servicing is required. Customers have a quick and comprehensive overview of their machines. Spare and wear parts that have already been ordered can be viewed and easily requested again.

The big advantage, however, is the integrated ticket system for service cases. This makes it much easier for both the customer and Wöhler to keep track of individual service cases on a chat basis. All tickets remain in the system and can be searched so that the customer can find solutions to recurring service cases independently. In addition, customers can access the documentation and accompanying documents for their machines at any time in the new customer portal. Wöhler Service will be happy to introduce the new customer portal to all interested customers.

Don’t miss the opportunity to explore these innovations and more at Wöhler’s booth at the World Brush Expo. Visit Stand E1 in Hall 30 to discover the future of brush production technology.

To learn more about Wöhler, visit bt.woehler.com/en/.

www.brushwaremag.com | 25

Tai Hing — Hongkong Professional Filament Material Manufacturer Since 1985

We are thrilled to announce that we will participate in the WORLD BRUSH EXPO 2024, which will be held from May 22-24, 2024, in the 29 and 30 halls of the Bolognafiere Venue, Bologna, Italy. We sincerely welcome all brush manufacturers and customers from any industries visit our booth L9 to share our innovative filament products and the best-customized filament solution.

The World Brush Expo is the brand new trade fair for the global brushware industry that includes technical brushes, paintbrushes, paint rollers, hygiene brushes, oral care brushes and the mop industry.

At WORLD BRUSH EXPO 2024, we will display our professional filament varieties with different characteristics applied in various brush applications. There are Lasson™, Soclean™, Tuboss™, Beauty™Fil, Sentec™, Superball™, Nexvan™, GrindFil™, Doclean™, Videfense™, Maskfit™ etc. These filaments are widely applied in industrial brush, toothbrush, paintbrush, household cleaning brush, artist brush, hairbrush, road sweeping brush, hygiene brush and mask industries, etc.

With the development of society, people’s health and environmental protection awareness has been greatly improved. They will prefer the environmental brush products that reduce the pollution of the ecological environment. Therefore, our new filament materials, BioFil biodegradable filament and PCR post-consumed recycled filament, are very popular in the brush industry.

26 | www.brushwaremag.com
supplier SPOTLIGHT

BioFil contains renewable plant raw materials, such as wheat, corn and sugar beet. Compared to petroleum-based plastic, BioFil can be degraded into carbon dioxide and water under composting conditions. According to the testing standard DIN EN13462:2000-12, ASTM D 6400:2019-01, it was reported that the bio-degradation rate of BioFil achieved 90.75% within 145 days. BioFil has been certificated by the chemical limitation test, bio-degradation test, ecotoxicological test and the earthworm ecotoxicity test.

It is suitable for making toothbrushes, makeup brushes, false eyelashes, household cleaning brushes and hygiene brushes. The application of BioFil helps brush manufacturers produce biodegradable brushes without causing any pollution to the environment in the production and final treatment process.

PCR filament, another eco-friendly filament material, is competitive with new nylon filament materials in terms of working performance, toughness and durability after the special treatment process.

The raw material of PCR filament recycles the abandoned plastic (PBT/PET/PP/NYLON 6 material) within 50 kilometers from the coast, which ensures that consumers can purchase the product beneficial to reducing ocean pollution.

Compared to the original plastic, it is reported that PCR filament effectively reduces the cumulative energy by 43 percent and water consumption by 15 percent, which is offered by our PCR raw material suppliers.

Additionally, GrindFil, abrasive filament, has been a highly anticipated product since its launch. It is made of nylon 6/66/612 base material and is combined with silicon carbide/ Aluminum Oxide/Diamond abrasive material.

GrindFil has better characteristics of wear resistance, toughness, resilience, chemical resistance, etc. It has excellent working performance when it is applied in polishing, deburring, grinding, finishing and coating removal industries.

Tai Hing looks forward to your visit to L9 booth, where we will demonstrate the exceptional performance and versatility of our nylon brush filaments. Join us as we embark on a journey of innovation and discover the future of industrial brushes together.

For further information, please contact us at marketing@taihingnylon.com.

See you in the WORLD BRUSH EXPO 2024 in Bologna, Italy.

www.brushwaremag.com | 27

Roth Composite Machinery Ready To Showcase Automated Machine Concept in Bologna

Roth Composite Machinery from Burgwald will be presenting the new development from its own innovation department at the World Brush Expo in Bologna (Hall 30, Stand E15). The fully automatic concept can be used to produce brushes that differ completely in terms of length, geometry and material — and with minimal set-up effort. The new WTR is characterized by shorter set-up times, higher output and greater flexibility in production — making it significantly more efficient and versatile than other machine concepts on the market.

28 | www.brushwaremag.com
machinery SPOTLIGHT
Flexibility, speed and quality take center stage as Roth Composite Machinery presents a new fully automated machine concept at the World Brush Expo Photos provided by Roth Composite Machinery.

“We want to convince the trade fair visitors in Bologna of all these plus points,” says Dennis Brückner, responsible for the Burgwald plant at Roth Composite Machinery, and sales engineer Thomas Halbrucker, “The machine concept and the high degree of automation fulfill the needs of flexible mass production and meet our high standards of quality and sustainability.”

Networking and Exchange Take Center Stage

The “Brushes & Brooms” business unit of Roth Composite Machinery in Burgwald (formerly Schlesinger) has more than one hundred years of experience in the design and realization of machines for brush production. With a mix of experience, expertise and continuous development, the more than 50 employees in Burgwald have established themselves as world leaders in the industry — not least thanks to a global network of contacts for sales and service. The company has attracted attention in recent years with energy-saving, yet particularly powerful drive elements and a highly efficient manufacturing process: The filling tool technology, known as “RoAn”, scores with extremely smooth running, low wear and above-average process reliability. “We stand for first-class product quality and high-performance mechanical engineering worldwide,” says Dennis Brückner, “while our machines are also versatile and user-friendly.”

In Bologna, the organizers are particularly looking forward to the industry coming together again after a long break. “Networking, exchanging ideas, meeting familiar faces and getting to know new potential business partners: we associate all of this with the World Brush Expo, which is why we will be there with an international team of ten people in total,” says Dennis Brückner and Thomas Halbrucker, who are responsible for the event.

Roth Composite Machinery is a specialist in special machine construction the company plans, designs and manufactures units, machines and entire production lines in the following business areas

• Filament Winding & Prepreg

• Pleating & Coating

• Brushes & Brooms

To learn more about Roth Composite Machinery, visit www.roth-composite-machinery.com.

www.brushwaremag.com | 29
Thomas Halbrucker (left) and Dennis Brückner (right)

Supply Chain Disruptions and Chokepoints Dominate

To succeed in the current world dominated by supply chain disruptions and chokepoints, executives must create resiliency and get ahead of the inevitable volatility. The latest, the Francis Scott Key Bridge collapse, has caused massive diversions on the East Coast and in the Baltimore region pointing out the need for backup sources of supply and agility in the supply chain. The level of geopolitical and supply chain risk has remained elevated and should not be ignored in designing supply chain plans.

When the container ship ran into the Francis Scott Key Bridge, causing the bridge to collapse, the regional supply chain came to a screeching halt. The destruction of the bridge cut off the Baltimore port by effectively creating a wall between the port and the Chesapeake Bay. The port is likely to remain closed for a few months and traffic diverted. The Baltimore port is the fifth largest port on the East Coast and the largest port for roll-on/roll-off cargo such as automobiles, light trucks and construction and farm equipment.

The consequences of the bridge collapse are far-reaching, but the most significant industry impact will be the automobile sector. Once the container ships are offloaded at another port, they will need to be transported to the Baltimore region or new sources of supply will be sourced. There are 3,200 sites involved in logistics, distribution and warehousing near the port and bridge. According to the American Trucking Association (AMA), almost 4,900 trucks travel the bridge each day, with $28 billion in goods crossing each year. Severe disruption will remain until the bridge is rebuilt, creating congestion and diversions for the next few months.

The Baltimore bridge collapse is just the latest in a series of disruptions and chokepoints in the global supply chain. The pandemic created a significant chokepoint at the West Coast ports. According to the Journal of Commerce, the West Coast share of imports coming from Asia was down from 61.1 percent in 2021 to 58.8 percent in 2022 while the East Coast and Gulf Coast ports rose. For example, customers started diverting shipments from Northeast Asia destined for the East Coast through the Panama Canal; however, in 2023, the Panama Canal experienced a drought and capacity was

reduced by 50 percent over time. This created a chokepoint in that region with congestion, delays and increased prices for expedited travel through the canal. Thus, customers looked for new routes.

One new route was to ship products from Northeast Asia through the Red Sea and Suez Canal to the East Coast ports. This backup plan worked well until the Iran-backed Houthi rebels started attacking container ships in the Suez Canal creating a new supply chain chokepoint. Container ships had to divert around the southern tip of Africa, adding 10 days and 1,000-5000 nautical miles to the trip, thereby delaying shipments and adding cost. Thus, the Baltimore bridge collapse is simply the latest disruption to hit the global supply chain. Each disruption increases inflationary pressure and creates new diversions. Now some customers are rerouting from Northeast Asia to the West Coast ports and will rail or truck products to the East Coast.

A backup plan is no longer sufficient. In fact, a backup to the backup plan is also not sufficient. Instead, companies are creating resiliency in the supply chain. They are using processes such as SIOP (Sales Inventory Operations Planning) to proactively navigate changing conditions to get ahead of disruptions and chokepoints. Moving towards regional supply chains is also gaining in popularity as companies want to gain control over their supply chain. Advanced technologies such as 3D printing also provide additional options for gaining control and creating resiliency. Being vulnerable to disruptions is no longer an option.

Lisa Anderson is the founder and president of LMA Consulting Group, Inc., a consulting firm that specializes in manufacturing strategy and end-to-end supply chain transformation that maximizes the customer experience and enables profitable, scalable, dramatic business growth. She recently released “SIOP (Sales Inventory Operations Planning): Creating Predictable Revenue and EBITDA Growth”, an e-book on how to better navigate supply chain chaos and ensure profitable, scalable business growth. A complimentary download can be found at www.lma-consultinggroup.com/siop-book/.

supply CHAIN
30 | www.brushwaremag.com

INDUSTRIAL BRUSHES

ACCELLERATING GROWTH WITHIN THE BRUSH INDUSTRY

Given that industrial brushes are ubiquitous in all facets of society, it is not surprising that its market share in the multibillion dollar global brush industry is enormous. In a 2022 analysis by India-based Maximize Market Research, it reported that the global industrial brush market size was valued at US $654.72 million, with total revenue expected to grow at 8.5% compound annual growth rate (CAGR) from now to 2029.

During that period, the firm projects that the industrial brush market size should reach $1.15895 billion. Factors driving this steady, robust growth include increasing demand from the manufacturing industry for brushes used in such applications as surface finishing, cleaning, and deburring; and demand for specialized/custom made brushes for automation and robotic equipment, 3D printing, and other end-user requirements. None of this is news to those involved in industrial brush manufacturing; they are in the thick of providing products and services to their customers. To gain insight from the ground floor, Brushware sought and received answers to the following questions from those involved:

cylindrical and all other shapes.

CEO Lance Cheney, Braun Brush Company, Albertson, New York: Our company produces a wide array of industrial brushes, including epoxy set, fused, twisted in wire, staple set, wire wound, and wire drawn brushes. Each type is crafted to meet diverse industrial needs, offering durability, precision, flexibility, and strength tailored to specific applications.

2. What industries does your company primarily serve with your industrial brushes?

1. What types of industrial brushes does your company manufacture?

Alessandro Acquaderni, CEO of SITBRUSH, Bologna, Italy: Power brushes, hand scratch brushes, industrial roller brushes, wide-face brushes.

Jim Benjamin, president, Precision Brush, Solon, Ohio: Precision Brush Company manufactures metal channel strip brushes in a variety of shapes and sizes. Straight strip and cylinder brushes are the most common, but we also are experts in making inside disks, outside disks, cup brushes and other odd-shaped brushes. These brushes are used in almost every industry and are unlimited in their uses and applications.

Linzmeyer-Jelinek: We serve a wide array of industries, catering to sectors such as aerospace, power generation, agriculture, automotive, laboratory, food processing, metalworking, HVAC, chemical processing, and graphic arts. Our clientele spans across diverse sectors, reflecting the versatility and quality of our products tailored to meet the rigorous standards of professional

Rakusin: We have a strong presence in the automotive and aerospace industries, where our brushes play a vital role in various manufacturing procedures. Our offerings include a range of products tailored to their specific needs: from our standard hand industrial brushes to those designed for critical ESD (Electro Static Discharge) environments, custom brushes crafted to address specific challenges, and even paint and artist brushes. Our market has experienced significant growth thanks to our 13 acquisitions. As a result, we have established strong footholds in the janitorial, food service, electronics, paint and sundries, and industrial sectors, where we consistently excel.

Cheney: Our industrial brushes serve a broad spectrum of industries, including automotive detailing, food production, pharmaceutical, aerospace, medical, and general industrial sectors. Our products are designed to meet the rigorous standards and diverse needs of these fields.

Benjamin: Most of our products are used in industrial applications where sealing, wiping, agitation, cleaning, moving of product, holding items or any other imaginable application is possible. We have produced over 200,000 unique brushes,

INDUSTRIAL BRUSHES ARTICLE
32 | www.brushwaremag.com
|
2024 World
Brush
Expo Bologna, Italy
May 22-24, 2024

A New Era

World Brush Expo is on track to become the new flagship event for the brushware industry

The World Brush Expo has finally arrived and organizers are pleased to see that the inaugural event has attracted over 150 brushware industry companies that will exhibit at the Bolognafiere venue in Bologna, Italy, from May 22-24, 2024.

The Expo will be held in Halls 29 and 30 of the venue with over 20,000 square meters of event space. Exhibitors will come from all parts of the world representing technology and products in the industrial brush, paintbrush, paint roller, hygiene brush, oral care brush and mop industry segments.

Filling the hole left by the demise of the popular Interbrush show that was last held in Freiburg, Germany, in 2016, the World Brush Expo sets a new precedent for collaboration in the industry as the ABMA and FEIBP have worked in partnership with tradeshow organizer Bolognafiere to bring this event together.

“Organizing this show represented a significant change, achieved in just over 12 months after more than 25 years of its predecessor’s legacy, in a new location, a different country and a definitively transformed business world,” says Alessandro Acquaderni, FEIBP President. “This swift and successful transition is a testament to the extraordinary cooperation between FEIBP, ABMA and many of our members, whom I affectionately call ‘brush-believers.’ Together, we have actively contributed to reshaping the brush industry, demonstrating remarkable adaptability and innovation.”

He also emphasized the overall impact of the event saying the new tradeshow stands as the premier B2B platform that unites the entire brush industry under one roof. With more than 150 exhibitors confirmed, the show floor will be a vibrant marketplace featuring the latest in filament, machinery and brush industry components. Visitors to the Expo will include brush manufacturers and brushware professionals of every conceivable type, creating a unique opportunity for networking, discovery and business development. In addition, themes around innovation and sustainability encapsulate a new vision for the future of the brushware industry.

The skyline of Bologna with the two leaning Towers at dusk by istockphotos/Juergen Sack.

www.brushwaremag.com | 33

Explore Bologna

While there is no question that three days of interaction on the tradeshow floor will provide all sorts of new business and networking opportunities, attendees and exhibitors are also fortunate to spend time before and after the show in one of Europe’s most remarkable cities. Bologna offers the perfect combination of culture and knowledge, conviviality and good food, traditions and a mindset that is always open to the future.

The city is the capital of the Emilia Romagna region which is world renowned for both the Food Valley and Motor Valley. Located between the Tuscan-Emilian Apennines and the heart of the Po Valley, Bologna offers easy access by train to cities such as Venice, Florence, Milan and Rome.

The Food Valley

Emilia-Romagna’s Food Valley is synonymous with the finest quality ingredients, meticulously crafted dishes, and a deeprooted passion for culinary heritage. Food isn’t just sustenance; it’s an art form, a way of life and a source of immense pride for its inhabitants.

At the heart of the Food Valley are the cherished culinary treasures that have gained international acclaim. Parmigiano Reggiano, the king of cheeses, is meticulously aged in the region’s cheese factories, developing its signature nutty flavor and crystalline texture. Prosciutto di Parma, delicately cured and aged to perfection, embodies the artistry of traditional Italian charcuterie. Aceto Balsamico Tradizionale di Modena is the region’s revered balsamic vinegar, which is produced through a meticulous aging process in wooden barrels, resulting in a sweet, complex elixir prized by chefs around the globe.

The gastronomic landscape of Emilia-Romagna is also shaped by its iconic pasta. From the silky strands of tagliatelle to the delicate pockets of tortellini, handmade pasta is a culinary cornerstone, lovingly prepared by generations of pasta artisans using time-honored techniques.

Beyond its famed exports, the Food Valley delights visitors with an array of regional specialties. Culinary pilgrims can savor the rich, meaty flavors of ragù alla Bolognese, a hearty meat sauce that pairs perfectly with freshly made tagliatelle. EmiliaRomagna’s street markets are highlighted by vibrant displays of seasonal produce, from plump tomatoes to fragrant herbs, inspiring chefs and home cooks as well.

34 | www.brushwaremag.com
Bologna,
| May 22-24, 2024
2024 World Brush Expo
Italy
Piazza Maggiore and Palazzo del Podestà by istockphotos/RossHelen.

Enjoy The Culture

PIAZZA MAGGIORE: Start your exploration of Bologna at its main square, Piazza Maggiore. Admire the beautiful architecture of buildings like the Palazzo d’Accursio and the Basilica di San Petronio. Don’t forget to visit the Fountain of Neptune, a symbol of the city.

ASINELLI AND GARISENDA TOWERS: Climb the iconic Asinelli Tower, one of the Two Towers of Bologna, for panoramic views of the city. The towers are symbols of Bologna and offer a unique perspective of its skyline.

BASILICA OF SAN PETRONIO: Explore one of the largest churches in the world, the Basilica of San Petronio. Marvel at its impressive interior, which features beautiful artwork, sculptures and the meridian line, an astronomical instrument.

ARCHIGINNASIO OF BOLOGNA: Visit the Archiginnasio, once the main building of the University of Bologna, which is the oldest university in the world. It currently houses the Archiginnasio Municipal Library, the stunning anatomical theater and the richly decorated halls.

MERCATO DI MEZZO: Immerse yourself in Bologna’s culinary scene at Mercato di Mezzo, a historic market with a variety of food stalls offering local delicacies, fresh produce, cheeses, meats and more.

BOLOGNA’S PORTICOS: Take a stroll along Bologna’s famous porticos, which are covered walkways that stretch for kilometers throughout the city. These porticos are not only practical but also architecturally beautiful, providing shade and shelter from the elements.

BOLOGNA FOOD TOURS: Indulge in a food tour to taste some of Bologna’s renowned culinary specialties, such as fresh handmade pasta, tortellini, mortadella and gelato. Bologna is often referred to as “La Grassa” (The Fat One) due to its delicious cuisine.

MUSEUM OF MODERN ART OF BOLOGNA (MAMBO): Art enthusiasts shouldn’t miss the Museum of Modern Art of Bologna, which showcases contemporary art from Italy and around the world. The museum’s collection includes works by renowned artist Morandi.

SANTO STEFANO BASILICA: Visit the complex of Santo Stefano, also known as the Seven Churches, which comprises several interconnected churches and chapels. The Basilica of Santo Stefano is a place full of curiosities, which has assumed various functions during its history. Explore the unique architecture and soak in the spiritual atmosphere.

www.brushwaremag.com | 35
Your Per formance – Made by Roth Your partner for high quality machinery Meet us at Hall 30 Booth E15 Roth Composite Machinery GmbH Plant Burgwald • Forststr. 3 • 35099 Burgwald • Germany • Phone +49(0)6451/71918-0 www.roth-composite-machinery.com • info@roth-composite-machinery.com

The Motor Valley

Motorsport is part of the DNA of the Emilia-Romagna region as few other places in the world can match the number of race tracks and sports car and motorcycle manufacturers located in the region.

MANUFACTURERS

Ferrari

Via Abetone Inferiore, 4, 41053 Maranello MO, Italy

Synonymous with luxury, performance and Italian flair, Ferrari is one of the most revered automotive brands in the world. Founded in Maranello in 1939 by Enzo Ferrari, the company has a storied history in Formula One racing and produces some of the most sought-after supercars. www.ferrari.com

Lamborghini

Via Modena, 12, 40019 Sant’Agata Bolognese BO, Italy

Founded in Sant’Agata Bolognese in 1963 by Ferruccio Lamborghini, Lamborghini is renowned for its avant-garde design, raw power and uncompromising performance. The brand’s supercars, such as the iconic Lamborghini Miura and Aventador, embody the essence of automotive excellence. www.lamborghini.com

Pagani

Via dell’Artigianato, 5, 41018 San Cesario sul Panaro MO, Italy

Pagani Automobili, based in San Cesario sul Panaro, is a boutique manufacturer known for creating some of the most exclusive and awe-inspiring hypercars in the world. Founded by Horacio Pagani in 1992, the company combines exquisite craftsmanship with cutting-edge engineering to produce limited-production masterpieces like the Huayra and Zonda. www.pagani.com

Tazzari EV

Via Selice, 42E, 40026 Imola BO, Italy

Tazzari EV specializes in electric vehicles and is particularly known for producing compact electric cars. Founded in 2006 by Alessandro Tazzari, the company has gained recognition for its innovative approach to urban mobility and sustainability. www.tazzari-zero.com

36 | www.brushwaremag.com
2024
Bologna, Italy | May
2024
World Brush Expo
22-24,
Above: Entrance of Ferrari Museum in Maranello, Italy. istockphotos/Marco Ramerini

®

FLAT AND ANGULAR BRUSHES PLANTS

A complete range ready to satisfy all your needs in the field of the paint brush production from 1” to 5”. User friendly set-up and quick format change, up to 1400 pieces/hour.

SAVE THE DATE! WORLD BRUSH EXPO BOLOGNA (ITALY) 22- 24 MAY 2024

HALL 29 - STAND A18

READY TO MEET YOU ALL IN BOLOGNA WITH OUR LATEST INNOVATIONS IN THE SECTOR!

Corporate Center Drive
100 A - Charlotte, NC 28226
+1
2224
8050
Suite
Ph.
724 713
info@mggnacorp.com www.mggmeccanica.com

Maserati

Viale Ciro Menotti, 322, 41100 Modena MO, Italy

Another giant in the world of sports cars, Maserati is celebrated for its elegant design, refined craftsmanship and exhilarating performance. Established in Bologna in 1914, Maserati continues to produce luxury sports cars that combine Italian passion with cutting-edge technology. www.maserati.com

Ducati

Via Cavalieri Ducati, 3, 40132 Bologna BO, Italy

Embodying the spirit of Italian motorcycle racing, Ducati is a legendary manufacturer renowned for its high-performance motorcycles. Established in Bologna in 1926, Ducati has a rich racing heritage and produces a range of sport bikes, naked bikes and cruisers that thrill riders around the world. www.ducati.com

Dallara

Strada Provinciale, 40, 43040 Varano de’ Melegari PR, Italy

Based in Varano de’ Melegari, Dallara is a leading manufacturer of race cars and chassis, with a strong presence in motorsport. Founded by Giampaolo Dallara in 1972, the company has played a significant role in various racing series, including Formula One, IndyCar and sports car racing. www.dallara.it

Bimota

Via Giuseppe Marconi, 6, 47924 Rimini RN, Italy

Bimota is a boutique motorcycle manufacturer known for its high-performance, handcrafted bikes. Founded in Rimini in 1973, Bimota has garnered a reputation for innovation and engineering excellence, producing limited-production motorcycles that push the boundaries of design and performance. www.bimota.it

38 | www.brushwaremag.com
2024 World Brush Expo Bologna, Italy | May 22-24, 2024
1957 Maserati 250s. istockphotos/Federico Luppi Vintage 1960 Ducati 200 Elite. istockphotos/ermess
an event by In Partnership with THE BRAND NEW TRADE FAIR FOR THE BRUSH, PAINTBRUSH, PAINT ROLLER, ORAL CARE AND MOP INDUSTRIES
22-24, 2024 BOLOGNA | ITALY
MAY

Racetracks: Emilia-Romagna

Autodromo Internazionale Enzo e Dino Ferrari, Imola, Italy. Photographer: PASCAL SAIVET-Alamy Stock

Misano World Circuit Marco Simoncelli

Santa Monica-Cella

The Misano Circuit is a renowned racetrack situated in Misano Adriatico, Rimini province, within the EmiliaRomagna region of Italy. Named in honor of Marco Simoncelli, the beloved MotoGP champion who tragically passed away in 2011, the circuit boasts a rich history and hosts a variety of motorsport events.

Opened in 1972, the Misano Circuit spans 4,226 meters in length and can accommodate up to 100,000 spectators. It has gained international acclaim for hosting prestigious events such as the MotoGP (San Marino and Rimini Riviera Grand Prix) and the Superbike World Championship, attracting large crowds of racing enthusiasts from around the world.

The circuit’s layout features a mix of fast straights and challenging corners, providing an exhilarating experience for both riders and drivers. In addition to motorcycle racing, Misano World Circuit also hosts events for four-wheeled vehicles, including the Blancpain GT Series Sprint Cup and the Truck Grand Prix.

Autodromo Enzo e Dino Ferrari

Imola

Commonly known as the Imola Circuit, is a legendary racetrack located near the town of Imola just 40 minutes from Bologna. Named in honor of Enzo Ferrari, founder of the Ferrari racing team, and his son, Dino Ferrari, the circuit has a storied history dating back to its inauguration in 1952.

The Imola Circuit gained international fame for hosting the Formula 1 Grand Prix of San Marino from 1981 to 2006. With its challenging layout characterized by high-speed straights and technical corners, the track earned a reputation as one of the most demanding and thrilling circuits on the Formula 1 calendar. World Brush attendees arriving the weekend prior to the event also have the opportunity to see an F1 event as the 2024 Emilia Romagna Grand Prix will be held on Sunday, May 19, 2024, at the circuit.

In addition to Formula 1 races, the Imola Circuit has also hosted prestigious events such as the World Superbike Championship, Italian Motor Speed Championship and various other motorsport competitions. Its technical complexity and scenic surroundings make it a favorite among drivers and spectators alike.

40 | www.brushwaremag.com
2024 World Brush Expo Bologna, Italy | May 22-24, 2024
Photo

Autodromo Riccardo Paletti

Varano de’ Melegari

Situated in Varano de’ Melegari within the Parma province of Italy’s Emilia-Romagna region, the track is named after former Formula 1 driver Riccardo Paletti. The circuit spans a length of 2,350 meters and offers a diverse range of activities for motorsport enthusiasts. Established in 1991, the track is home to the International Safe Driving Centre, founded by Andrea de Adamich, another former Formula 1 driver. The center specializes in offering courses designed to enhance driving quality and improve car control, making it an ideal destination for drivers looking to refine their skills.

Throughout the year, the Riccardo Paletti Racetrack hosts a variety of races for both cars and motorcycles, as well as rallies and other motorsport events. Additionally, the track provides opportunities for enthusiasts to engage in freestyle test drives, allowing them to experience the thrill of driving on a professional circuit.

Autodromo di Modena Modena

Built in 2011, the Autodromo di Modena has a circuit length of 2,007 meters and stands out for its diverse layout featuring various levels and a straight section measuring approximately 400 meters interspersed with tight and wide bends. Initially conceived as a safe driving center, Modena Racetrack offers a range of driving courses aimed at enhancing driving skills and techniques. These courses include sports car driving, daily drive and green drive programs, with a particular focus on promoting fuel-efficient driving practices.

Aside from its educational offerings, Modena Racetrack provides opportunities for enthusiasts to experience the thrill of driving on a professional circuit. The track can be rented for free-style motorcycle or car driving sessions, as well as for track tests, allowing drivers to push their vehicles to the limit in a controlled environment.

www.brushwaremag.com | 41

2024 ABMA Convention Generates Buzz for New Expo

Artificial Intelligence and Recruiting are Hot Topics for the Brush Industry

With the scenic Omni Resort on Amelia Island in Florida as the backdrop, the 107th edition of the ABMA Convention was held March 19-22, 2024. The event was highlighted by an engaging program that revolved around several key topics for the brush industry, including recruiting, artificial intelligence and the mental well-being of workers.

Similar to previous Interbrush years, the event saw slightly lower overall attendance with the inaugural World Brush Expo on deck in May. ABMA president Chris Monahan (Brush Fibers) reported during the General Business session that the 2024 event had 135 attendees and 29 supplier tables. Despite the smaller footprint, it seemed the anticipation for the new Expo created a buzz and positive energy amongst ABMA attendees. That energy was particularly evident as attendees enjoyed the Wednesday keynote from futurist Michael Rogers that tackled the impact of AI and automation for manufacturing. The presentation easily connected with key issues presented during the previous day’s educational sessions, which included topics on recruiting, cybersecurity and mental well-being for workers. Considering the overall range of issues in business, there’s no question that manufacturing leaders are living through one of the more dynamic periods of change in the industry, which seems to be just in the early stages.

Committee Meetings

From an ABMA standpoint, the event started with committee meetings on Tuesday, March 19, 2024. The most active discussion occurred during the membership committee meeting where overall membership was discussed as the association saw a slight decline from 2022 to 2023.

Of particular interest was the dilemma of whether or not to allow international brush manufacturers to join the association. The committee discussion indicated that the number of brush manufacturers in America was unlikely to increase, so that would make membership growth challenging. Without membership growth, the existing members would likely see membership dues increase. The counterargument was that it wouldn’t be an “American” brush association if the ABMA opened up to international brush manufacturers. Additionally, that would effectively change the mission of the association.

It was noted that the World Brush Expo was likely driving the increase in the number of international inquiries, which in turn was creating some urgency around enforcing a policy. The issue was left for the ABMA Board to discuss in their closing session on Friday morning.

Educational Sessions

After the committee sessions on Tuesday and a lunch break, the event officially opened in the afternoon with an introduction from ABMA Vice President R.J. Lindstrom (Zephyr Manufacturing). That was followed by the “breakout” educational sessions which ran concurrent 40-minute sessions that were repeated so attendees could attend all three, which included:

• Mental Health and Well-Being in the Workforce

Heather Noftall, HR Professional

• Data and Device Security, Ransomware

Chad Reinbold, SCS, Inc.

• Attracting Talent to Smaller Companies

Tim Pugh, Candidate Advocates

Kevin Monahan, Monahan Partners, attended all of the sessions and had a positive impression of all three. He says, “The cybersecurity stuff is scary but it hopefully gives a lot of people some tools. Then the attracting talent session was good.

42 | www.brushwaremag.com
Two bridges connecting Amelia Island and Big Talbot Island.
2024 ABMA Convention Amelia Island, Florida | March 19-22, 2024
Keynote speaker Michael Rogers
www.brushwaremag.com | 43
ABMA President Chris Monahan Chad Reinbold, SCS, Inc. discussing cybersecurity Heather Noftall, HR Professional, speaking in the Mental Health session R.J. Lindstrom, ABMA Vice President

I thought the presenter was really good and knew his stuff. I think we’re all kind of in the same boat as none of us here are enormous companies and most are not in big cities, so it was very relevant.”

Alessandro Acquaderni, FEIBP President (SIT Brush), commented on the success of the sessions as well and said that his favorite was also the one on Attracting Talent. He says, “That was very insightful and also it’s a hot topic nowadays. We are experiencing a lot of things, both in Europe and here in the U.S. Recently, we hired somebody on a Friday, signed the contract and Monday was going to be the first day. On Monday, he doesn’t show up and we see another person coming in. He says, ‘You’re looking for workers right?’ And we said, ‘Yes, well … who are you?’ He replied, ‘There’s a friend of mine that was supposed to start today, but he’s not going to start, but he referred me to you. So I can start if you’re willing.’”

General Business Session

On Wednesday morning, the convention shifted toward the General Business Session led by ABMA President Chris Monahan where all of the committee reports were delivered. Additionally, Acquaderni presented on behalf of the World Brush Expo and the FEIBP. His first segment highlighted a number of key trends for European brush manufacturers as he noted several challenges including inflation, the Russia/Ukraine War, conflict in the Middle East and the issues with the Suez Canal. He highlighted the fact that 90 percent of global transport is by sea and 15 percent of that traffic goes through the Suez Canal. He said the issues there led to a 15 percent increase in shipping costs.

On the positive side, he said the Eurozone GDP is expected to grow by one percent in 2024 and the FEIBP brush manufacturer quarterly surveys indicate optimism from member companies.

Additionally, he presented statistics on social media trends for the FEIBP member companies. He reported 24 percent growth in visibility on social media collectively with LinkedIn as the top social platform from member companies at 31 percent growth and 1.77 million cumulative followers. Facebook and Instagram also saw growth for FEIBP members while X (Twitter) saw a 0.5 percent decrease.

From the World Brush Expo perspective, Acquaderni emphasized the value of the upcoming event and how important it is for all brushware industry companies to take advantage of the opportunity to network, build on existing relationships and discover new opportunities. He was pleased to report the event already had more than 150 exhibitors and says that this was impressive considering the event was announced only 12 months prior. He noted that it was quite an achievement that an event of this scale was coming together so quickly under the collaboration of the ABMA and FEIBP with Bolognafiere.

Scholarships Announced

The ABMA Foundation Kathy K. Parr Scholarship Awards were also announced during the session with the following students earning scholarships:

JONATHAN CIULLO: Sophomore at Illinois Wesleyan University studying Business Entrepreneurship and Kinesiology. He is the son of Rachel Ciullo, Composite Cutter Technology.

LEALA PATRISS: Freshman at Midlands Technical College studying Sports Medicine, Exercise Science. She is the daughter of an employee at Perlon/Hahl.

BRYCE PENCE: Freshman at Howard Payne University studying Business and Kinesiology. He is the son of an employee at Zephyr Mfg.

CONNOR TIEGS: Junior at the University of WisconsinMilwaukee studying Business-Finance. He is the son of an employee at Osborn International.

JAEDEN TIEGS: Freshman at the University of WisconsinMilwaukee studying Mechanical Engineering. He is the son of an employee at Osborn International.

44 | www.brushwaremag.com
2024 ABMA Convention Amelia Island, Florida | March 19-22, 2024
FEIBP President Alessandro Acquaderni

Face 2 Face Stands Out

Thursday was the attendees’ final day, with the Suppliers Face 2 Face session once again proving to be the most valued component of the convention. The “speed dating” style meeting format featured 29 supplier tables with 15-minute meeting sessions that ran from 8:00 a.m. to 12:30 p.m.

Since the introduction of the Face 2 Face format in 2019, manufacturers and suppliers have continued to praise the session as it offers focused discussion opportunities and a methodical approach to meeting with key clients. There’s no question that convention attendees consider the chance to participate in the Face 2 Face session as one of the top benefits of ABMA membership and of attending the convention.

“You do a lot of business in the Face 2 Face, but the networking outside the Face 2 Face is just as important,” says David Kalisz, MFC Ltd. “The main part is the opportunity to learn from customers. You might hear about a problem they are having in production and they didn’t think about a new solution you might have for them. It all comes out of conversations, and if you don’t sit with them, you won’t learn it. The relationships you have with customers are cemented by the Face 2 Face meetings.”

Event Impressions

Following the Face 2 Face meetings, Thursday afternoon was left open for attendees and the evening then featured the traditional Suppliers’ Reception, which featured “A Taste of Italy” theme. The final day illustrated how the overall event seemed to have landed on an effective balance between engaging sessions and activities while also providing some space for additional conversations.

As for the overall impressions of the 2024 convention, ABMA Executive Director Donna Frendt says, “I think it’s been a successful event, a great turnout and people have been very happy with the meeting times and everything else that’s going on. They’re having good interactions. A lot of trade shows, I think, are going by the wayside. You really have to see the value in the relationships … you know it’s a long game. You come and you build the relationships and maybe you don’t do business today, but when they need you down the line, they know who you are.”

Kevin Monahan adds, “It’s a good combination of an opportunity to learn from the sessions and keynote, and of course, there are very few opportunities for us to see so many different customers in the same place. That’s one of the huge values of coming to the ABMA Convention. It continues to be unique, not just in that it is kind of a niche industry, but also the people, it is a genuinely friendly environment even amongst competitors and that’s hard to come by.”

Acquaderni says that the convention is always a great opportunity to strengthen business and relationships. “Business is always made based on trust, and the more trust there is between companies the easier the relationship is managed,” he says. “Someone may think the convention takes too much time or there is not enough business. But it’s fundamental in building up the trust that will facilitate a business relationship. Now I have a very good relationship with many suppliers and many other brush companies. When we need something, we know we will have a priority and when they need something, we probably already know what they need, so that makes business easier, faster and more reliable.”

2024 Convention Notes

• The 2025 ABMA Convention will be held March 25-28, 2025, at the Hyatt Regency Lost Pines outside Austin, Texas. The event will retain the Tuesday through Friday format introduced to offer better pricing on lodging.

• Looking further ahead, future ABMA convention sites being considered for 2026 and beyond include Bonita Springs, Florida, Puerto Rico and Arizona.

• The ABMA Officers for 2024 are Chris Monahan (Brush Fibers) — President, R.J. Lindstrom (Zephyr Manufacturing) — Vice President, Todd Leventhal (Nexstep Commercial Products) — Treasurer and Greg Miller (The Mill-Rose Company) —Past President.

• The ABMA Board for 2024 includes Ernest “Chip” Preston (Spiral Brushes), Ed Lowder (Monterey Mills), Terry Hogan (Perlon, Hahl), Tim Hack (Epic Resins), Lance Cheney (Braun Brush), Imre Karetka (Pferd, Inc.), Mike Khabibulin (Sherwin Williams) and Rachel Ciullo (Composite Cutter).

• Alessandro Acquaderni reported that the World Brush Expo LinkedIn Page has 468 followers and 240,000 impressions since its launch. In addition, the event website has had 20,000 visitors since June of 2023 from 113 countries.

• Following the 2024 FEIBP Congress this October in Ibiza, Spain, the 2025 Congress is targeted for Ischia, Italy.

46 | www.brushwaremag.com
|
2024 ABMA Convention Amelia Island, Florida
March 19-22, 2024
Tim Pugh, Candidate Advocates led the Attracting Talent session
48 | www.brushwaremag.com
2024 ABMA Convention Amelia Island, Florida | March 19-22, 2024
Face 2 Face Photo Gallery
Jim Benjamin, Precision Brush, with Ralph Rosenbaum, Stainless Steel Products Terry Hogan and Andrew McIlroy from Perlon/Hahl with FEIBP President Alessandro Acquaderni (SIT Brush) Gonzalo Martinez, Shaefer Brush and Gornell Brush with Sofia Teles, Filkemp Bruce Massey, Gibbs Interwire, with Greg Miller and Jason Riha, The Mill-Rose Company Dennise Silva, Enrique Mejia and Nora Bravo with PMM - Proveedora Mexicana Gary Townes, Magnolia Brush, with Jon Monahan, Monahan Filaments
50 | www.brushwaremag.com 2024 ABMA Convention Amelia Island, Florida | March 19-22, 2024
Jeff Malish, Malish Corp., with Chris Monahan and Ian Moss of Brush Fibers and Bart Pelton and Ron Cherryholmes, PelRay International Co. Lisa Boucherie, John Williams and Kris Geldof from Boucherie Bill Shaul and Kristin Draper, Draper Knitting Co. Kim Johnstun, Easy Reach Supply ABMA Executive Director Donna Frendt Pierre-Luc Pare and Dominc Pare of Multi Brosses
www.brushwaremag.com | 51
David Kalisz and Paty Cavazos, MFC Ltd. Gonzalo Martinez, Schaefer Brush and Gornell Brush, with Frank Kigyos, Franklin Automation, and Jarda Markvart, Woehler Brush Tech GmbH Dave Magner of Deco Products with Gary Townes of Magnolia Brush Mike Fredrickson and Cliff Bailye, Midalloy Specialty Materials
52 | www.brushwaremag.com 2024 ABMA Convention Amelia Island, Florida | March 19-22, 2024
Max Cheney and Lance Cheney, Braun Brush, with Maggie Gu and Thomas Morrissey, Celanese Filaments James Graham, Matthew McMillan and Craig Marshall, Atlas Graham Furgale, with Kevin Monahan, Monahan Partners Miguel Medrano and Carlos Petzold, Borghi USA with Taylor Jameson and Todd Ramsey, Ram Manufacturing Rachel Ciullo of Composite Cutter Technology

Industrial Brush Report: Accelerating Growth

Given that industrial brushes are ubiquitous in numerous industries, from automotive and aerospace to robotics, automation and food processing, it’s not surprising that its market share is enormous in the multi-billion dollar global brush industry.

In a 2022 analysis by India-based Maximize Market Research, it was reported that the global industrial brush market size was valued at US $654.72 million, with total revenue expected to grow at an 8.5 percent compound annual growth rate (CAGR) from now to 2029. During that period, the firm projects that the industrial brush market size should reach $1.15895 billion. Factors driving this steady, robust growth include increasing demand from the manufacturing industry for brushes used in such applications as surface finishing, cleaning, and deburring and demand for specialized, custom-made brushes for automation and robotic equipment, 3D printing, and other end-user requirements.

None of this is news to those involved in industrial brush manufacturing; they are in the thick of providing products and services to their customers. To gain insight from the ground floor, Brushware sought and received answers to the following questions from those involved in the sector.

What types of industrial brushes does your company manufacture?

Jim Benjamin, President, Precision Brush, Solon, Ohio: Precision Brush Company manufactures metal channel strip brushes in a variety of shapes and sizes. Straight strip and cylinder brushes are the most common, but we also are experts in making inside disks, outside disks, cup brushes and other odd-shaped brushes. These brushes are used in almost every industry and are unlimited in their uses and applications.

CEO Lance Cheney, Braun Brush Company, Albertson, New York: Our company produces a wide array of industrial brushes, including epoxy set, fused, twisted in wire, staple set, wire wound, and wire drawn brushes. Each type is crafted to meet diverse industrial needs, offering durability, precision, flexibility, and strength tailored to specific applications.

54 | www.brushwaremag.com
Industrial Brush Market Report
Gonzalo Martinez Jim Benjamin Ken Rakusin
Synthetic filamentsbrought to you by DKSH Switzerland Ltd. US Distributor: Brush Fibers Arcola Please contact us for further information, specifications and offers: Reinhold Hoerz Senior Sales Manager, Brush Industry Phone +41 44 386 7901 Mobile +41 79 785 4657 reinhold.hoerz@dksh.com www.dksh.ch/brush Think Asia. Think DKSH.

Amy Linzmeyer-Jelinek, Sales and Marketing Specialist, Schaefer Brush, Waukesha, Wisconsin: We specialize in crafting industrial brushes tailored to the specific needs and applications of our customers. Our diverse range of brush solutions includes twistedin-wire, staple-set, and metal back strip brushes, catering to various industrial requirements. Additionally, we excel in developing hand-drawn brushes for specialized applications, as well as intricate engineered brush systems designed for such tasks as cleaning broaches, conveyors, I-beams, channels and more. Our commitment lies in providing customized brush solutions that precisely meet the demands of our customers’ unique applications.

Alessandro Acquaderni, CEO of SITBRUSH, Bologna, Italy: Power brushes, hand scratch brushes, industrial roller brushes, wide-face brushes.

is possible. We have produced over 200,000 unique brushes, and often we are unaware of the specific end uses of these brushes.

Ken Rakusin, President & Chief Executive Officer, Gordon Brush, USA, City of Industry, California: Gordon Brush produces over 17,000 different kinds of industrial staple set, hand-tied, twisted in wire brushes that are flat, round, cylindrical and all other shapes.

What industries does your company primarily serve with your industrial brushes?

Linzmeyer-Jelinek: We serve a wide array of industries, catering to sectors such as aerospace, power generation, agriculture, automotive, laboratory, food processing, metalworking, HVAC, chemical processing and graphic arts. Our clientele spans across diverse sectors, reflecting the versatility and quality of our products tailored to meet the rigorous standards of professional applications in each industry.

Rakusin: We have a strong presence in the automotive and aerospace industries, where our brushes play a vital role in various manufacturing procedures. Our offerings include a range of products tailored to their specific needs: from our standard hand industrial brushes to those designed for critical ESD (Electro Static Discharge) environments, custom brushes crafted to address specific challenges and even paint and artist brushes. Our market has experienced significant growth thanks to our 13 acquisitions. As a result, we have established strong footholds in the janitorial, food service, electronics, paint and sundries and industrial sectors, where we consistently excel.

Cheney: Our industrial brushes serve a broad spectrum of industries, including automotive detailing, food production, pharmaceutical, aerospace, medical and general industrial sectors. Our products are designed to meet the rigorous standards and diverse needs of these fields.

Benjamin: Most of our products are used in industrial applications where sealing, wiping, agitation, cleaning, moving of product, holding items or any other imaginable application

Acquaderni: We serve many industries, from automotive to aerospace, from woodworking to primary metal, steel mills, from agriculture, food processing to precision machining.

What sets your industrial brushes apart from those offered by competitors in terms of quality, durability, and performance?

Martinez: It’s the culmination of our exceptional technology, talented workforce and over 118 years of industry experience. Our commitment to quality, durability and performance is evident in every aspect of our products and operations. First, our brushes are crafted using state-of-the-art technology, allowing us to maintain precision and consistency throughout the manufacturing process. Almost all our brushes are designed and produced by our teams in Waukesha, Wisconsin, and Chicago, Illinois. This ensures that each brush meets the highest standards of quality and performance. Secondly, our team of skilled professionals brings decades of collective expertise to the table. Their dedication to innovation and attention to detail result in brushes that are not only durable but also optimized for maximum effectiveness in a wide range of applications. Finally, our long-standing presence in the industry speaks volumes about our commitment to excellence. Over the years, we have refined our processes, honed our skills, and earned the trust of customers worldwide.

Cheney: What distinguishes our industrial brushes from competitors’ offerings are the aspects of quality, durability and performance, which are deeply embedded in our design and manufacturing process. Our philosophy is that brushes designed with a specific application in mind significantly outperform those intended for general use or retrofitted for a particular task. Durability is not a one-size-fits-all criterion; it is tailored to the application’s requirements. We have engineered brushes for both extremes: highly specialized brushes intended for a single-use application where precision is paramount, and on the other end, brushes designed for environments that are

56 | www.brushwaremag.com
Industrial Brush Market Report
Alessandro Aquaderni Lance Cheney

difficult to access and require longevity, ensuring they last for years. This bespoke approach allows us to meet and exceed our clients’ expectations across a variety of industries.

Benjamin: Precision Brush Company has great customer service, quoting capabilities and machinery to deliver brushes on time. The employees are a big part of this process and we are lucky to have a great office staff and manufacturing team that can back them up.

Rakusin: Our customers have learned that we provide them with brushes that meet, or usually exceed their expectations. Balancing quality, durability, performance and pricing are challenges that all manufacturers have to deal with. We may or may not be the least expensive, but delivering a durable, quality brush on time keeps our customers returning for more.

What materials are commonly used in the manufacturing of your industrial brushes, and what are the advantages of each?

Benjamin: The metal channel is usually galvanized steel or stainless steel, and the brush filament is usually a synthetic such as Polyamide (Nylon) or Polypropylene, although we also

can make metal channel strip brushes with natural fibers such as horse hair, Tampico or other animal hairs such as camel or goat hair. We can also make wire brushes using stainless steel, phosphor bronze, brass or steel.

Rakusin: Our biggest material usage is stainless steel, nylon, polypropylene, bristle and horsehair. While we use dozens if not hundreds of other materials, these are the materials that we use the most. Interestingly, none of them can replace another. For instance, stainless steel cannot replace nylon, as it would be too tough and could scratch the surface that the nylon would otherwise clean. Every material is unique in its own way. Gordon Brush maintains an immense variety of materials in our inventory to minimize lead times when we are producing custom brushes.

Cheney: Our industrial brushes are manufactured from a diverse range of materials, each chosen for specific benefits: Nylon offers excellent wear, functionality, and durability with outstanding memory. Polyester provides good wear and functionality, serving as a cost-effective alternative. Polypropylene is known for its weldability and superior

www.brushwaremag.com | 57
RESIN DISPENSING LINE WITH HANDLE ASSEMBLING AND CURING TUNNEL ÒTPP-HÓ PAINT BRUSH HEAD ASSEMBLING MACHINE ÒTPB3Ó MIXING MACHINE FOR BRISTLES AND FILAMENTS ÒM6ALÓ 1951 - 2016 65 YEARS SERVICING THE BRUSH INDUSTRY 1951-PRESENT OVER 65 YEARS SERVICING THE BRUSH INDUSTRY

chemical resistance. Boar hair is ideal for delicate surfaces, offering durability. Tampico features heat resistance, maintains stiffness when wet and offers chemical resistance. We also incorporate various types of metallic fibers to meet specialized industrial needs.

Linzmeyer-Jelinek: We prioritize meeting our customers’ needs and delivering the best solutions for their specific applications. When it comes to the materials used in manufacturing our industrial brushes, we tailor our choices to ensure maximum effectiveness and durability. For instance, we typically utilize galvanized stem wire to offer cost-effective solutions. However, we understand that certain industries, such as food processing, require higher standards of hygiene. Therefore, we also offer stainless steel options for brushes used in food-grade applications or environments with high moisture exposure upon request. Similarly, our staple-set brushes come with either wood, plastic or foam blocks, depending on the application’s requirements. We recognize that different environments and tasks demand different levels of durability and resilience, and we aim to provide suitable options accordingly. Regarding filament materials, our catalog boasts a diverse range to cater to various needs. This includes natural fibers like horsehair and Tampico, as well as wires made from brass, bronze, steel, tempered wire and a variety of nylon and polypropylene options including antibacterial, antistatic, high temperature resistant and FDA-approved filaments. Each material offers distinct advantages depending on the specific task at hand.

Acquaderni: We use wires of any materials and synthetic abrasive filaments.

Regarding your manufacturing process, what unique technologies are utilized?

Rakusin: For the last 20-25 years, Gordon Brush has continued to invest in new, modern CNC equipment that enables us to produce products rapidly in the most automated ways possible. We’ve been on a buying spree over the last four years or so, investing about $6 million in new machinery.

Acquaderni: We use quite a few of the technologies and machinery from the suppliers exhibiting at World Brush Expo 2024.

Gonzalo Martinez, President and CEO, Schaefer Brush: In our manufacturing process, we leverage cutting-edge technologies tailored to the production of twisted-inwire, staple set and metal back strip brush solutions. Our commitment to innovation drives us to continually invest in advanced equipment and techniques to enhance operational efficiencies and product quality. Some of the technologies we utilize include, state-of-the-art automated machinery for precision manufacturing of twisted-in-wire, staple set brushes and strip brushes. These machines ensure consistent product quality, reduce manual labor and optimize production

Spring loaded grounding brush with phosphor bronze brush wire from Gordon Brush. The brush maintains contact to moving or rotating surfaces even as the brush wears.

throughput. We harness data analytics tools to monitor and analyze various aspects of the manufacturing process, such as machine performance, material usage and quality control metrics. This data-driven approach enables us to identify opportunities for optimization, streamline workflows and minimize waste, ultimately improving overall operational efficiencies. By embracing these technologies, we not only maintain our competitive edge in the industrial brush market but also drive continuous improvement in product quality, efficiency and innovation, ultimately delivering superior value to our customers.

Benjamin: Precision Brush Company probably has more capacity and machinery than most other strip brush manufacturers. We mostly design and manufacture our own equipment which allows us to keep costs lower and capacity opportunities greater.

Cheney: In our manufacturing process, we employ several unique technologies to create our specialized brushes. Our extensive use of epoxy set techniques, especially for individual strand set brushes, caters to the stringent requirements of the food and pharmaceutical industries. We stand out in the market as one of the few manufacturers capable of producing cylindrical and bottle brushes through wire winding construction methods. Additionally, we are the sole provider of completely fused tube and pipe brushes, a testament to our innovative approach. A significant portion of our production involves custom-designed and engineered products. For these, we leverage our in-house 3D printing and CNC machining capabilities, enabling precise and efficient fabrication tailored to our clients’ specific needs.

How does your company ensure the quality and consistency of your industrial brushes?

Benjamin: Quality has been a major goal and one of our core values since the beginning of the company in 1951. We have great employees and systems to check that limit mistakes. We

58 | www.brushwaremag.com
Industrial Brush Market Report

very rarely get any brushes back because they were made wrong or had quality defects. If we do get any complaints it is usually because the shipment was lost by a carrier.

Erin Clay, Quality Manager, Schaefer Brush: Ensuring quality and consistency in our industrial brushes is a top priority at Schaefer and Gornell. We integrate various elements of quality management systems into our operations to achieve this objective. These include thorough drawing, design reviews, established tolerancing for different product lines and documented quality checks. Additionally, we foster a culture of open communication within our team, encouraging everyone to voice concerns and suggestions. Continuous improvement is ingrained in our practices, ensuring that we consistently strive to enhance our processes and products.

Cheney: Our company upholds the highest standards of quality and consistency in our industrial brushes through a culture where every team member is accountable for quality. Each individual takes ownership of the product quality that passes through their hands, embracing a proactive stance towards maintaining our standards. Rather than assigning blame for errors, we focus on collaborative problem-solving to prevent recurrence. This approach ensures that our brushes meet the stringent demands of our diverse clientele, maintaining our reputation for excellence.

Rakusin: Gordon is an ISO 9001:2015 certified company and we work hard to ensure that our brushes are made properly the first time and every time. This process has been fine-tuned over our 73 years in business.

Are your industrial brushes customizable to meet specific client needs? If so, what customization options are available?

Benjamin: Yes, customizable is what we do best. About 95 percent of what we manufacture is custom to a unique application or customer’s specification.

Acquaderni: Half of what we do involves customization, ranging from small changes in filament size to entirely new brushes engineered according to customer specifications, in collaboration with both the customer and the machine manufacturer.

Rakusin: Gordon Brush is a leader in making custom brushes for thousands of different customers and applications. We’ve sent brushes to the moon and Mars, saved the U.S. Army over $1.5 billion in engineering a brush to vastly extend the lifespan of the big gun on the Abrams tank, created brushes that the Bureau of Engraving use to print our U.S. currency and thousands of other applications. As we’re proud to say, “We’re Americans, We can do anything.”

Martinez: We understand that every application is unique, and we pride ourselves on our ability to tailor our products accordingly. Our most common customization options include adjusting the dimensions and configurations of our brushes to fit specific equipment or application requirements. Clients have the option to choose from a variety of brush materials, including nylon, natural fibers, metal wire and more, depending on the desired durability, abrasion resistance and other performance factors. We offer a range of filament types, such as crimped, flagged, abrasive or conductive filaments to suit different brushing needs. Clients can specify the density and length of brush filaments to achieve the desired brushing effect and coverage. We provide various mounting options, including shafts, handles or custom attachments to ensure easy integration into existing equipment or systems. Clients can request additional features such as anti-static properties, chemical resistance or specialized coatings to meet specific environmental or operational requirements. In addition to offering customizable industrial brushes, we have the capability to design complete engineered solutions to meet our customer demands. This includes not only tailoring individual brush components but also integrating them into comprehensive systems optimized for specific applications. Our engineering team collaborates closely with clients to understand their unique requirements and challenges, developing innovative solutions that address their needs effectively. Whether it’s designing brush systems for complex machinery or creating specialized brush configurations for unique applications, we leverage our expertise and resources to deliver tailored solutions that exceed customer expectations.

Leistner Werkzeug GmbH

Auerbacher Str. 15

D-08328

Stuetzengruen/Germany

www.leistner-gmbh.de info@leistner-gmbh.de

Ph: +49-(0)37462-288 150

Fx: +49-(0)37462-288 159

www.brushwaremag.com | 59
LEISTNER DRILLS FOR THE BRUSH INDUSTRY. MADE OF TUNGSTEN OR HSS. FOR USE ON HIGH PERFORMANCE CNC MACHINES
Proud Member of

Cheney: Our industrial brushes are highly customizable to meet the precise needs of our clients. In fact, two-thirds of our products shipped are tailored specifically to customer specifications. We excel in creating brushes that perfectly align with our clients’ exact requirements. Our customization options are virtually limitless, encompassing the use of any materials at our disposal. Furthermore, we are committed to innovation; we have developed new manufacturing methods specifically for certain projects to ensure that the final product meets the unique demands of our customers.

Can you provide examples of any innovative or specialized industrial brushes your company has developed to solve specific industry challenges?

Cheney: Certainly, our company has been at the forefront of developing innovative and specialized industrial brushes to address unique challenges across various industries. For example, we designed brushes capable of removing machining debris from pipes located 10,000 feet underground, a testament to our ability to provide solutions for extreme conditions. In the realm of marine technology, we’ve crafted brushes specifically to eliminate biofilm from critical components on unmanned underwater vehicles, ensuring their operational integrity in challenging marine environments. Furthermore, in the medical field, we’ve developed brushes used in surgical procedures for knee and hip replacements, highlighting our commitment to precision and safety. These examples, from our recent projects, showcase our efforts to meet the unique needs of various industries through specialized solutions.

Martinez: Our channel sweep solutions are an innovative response to a need in many industries that utilize chain conveyor systems. These systems are installed in-line and constantly run to keep the beam or interior of the channel free from debris, which reduces downtime that would otherwise be required to clean it.

Can you share any success stories or notable projects where your industrial brushes have made an impact for your clients?

Rakusin: For 20-25 years the brushes we make to print United States currency have been produced with the utmost care and attention to detail. Literally, if one of our brushes was out of spec or came apart, the potential damage to the printing presses and printing of currency would be devastating to the U.S. government. Fortunately, there has never been an issue with one of our brushes.

Cheney: There are many notable projects, however, one comes to mind. Several years ago, we received a call from a flustered engineer, who worked for a major snack food company. Apparently, a brush used in the production of one of their most prominent lines had been losing fiber which was ending up in the finished product. This led to the company shutting down the line that made this product in seven facilities throughout the U.S. The engineer had a private jet standing by and wanted to know if I would come back to the factory that night to meet him and produce a solution. I agreed and we worked throughout the night, eventually developing an entirely new way to make the brush for their application. We worked straight through the next 48 hours to produce enough brushes to get all their production facilities back online.

Debbie Stray, Customer Service Representative, Schaefer Brush: In a more lighthearted story, we once received a request from a client who needed a solution to keep turkeys from getting run over by their delivery trucks. How does a brush solve this problem? Well, the reason they were getting run over is they were falling through the gap between the loading dock and the truck when it backed into to loading bay. They needed something to create a sort of blockage between the truck and the dock, without damaging the dock or risking further harm to the turkeys. We designed what was basically a large strip brush with heavy synthetic filament that would bolt in place to close the gap and provide a bit of flexibility depending on how close the truck backed up. No more squished turkeys!

Are there currently any supply chain issues, and if so what, and how are you dealing with them?

Sue Rhodes, Purchasing Manager, Schaefer Brush: We encounter various supply chain challenges, particularly in sourcing raw materials both locally and internationally. These challenges include fluctuating material costs, availability constraints and unpredictable lead times. To address these issues effectively, we implemented a strategic approach focused on several key areas: We maintain strong relationships with

60 | www.brushwaremag.com
Industrial Brush Market Report
Braun Brush specialty stainless brush

our suppliers to ensure reliable access to high-quality materials. Regular communication and collaboration help us stay informed about market dynamics and potential disruptions. We prioritize quality when selecting raw materials, regardless of their origin. Rigorous quality control measures are in place to ensure that all materials meet our specifications and standards, thereby minimizing the risk of receiving substandard or defective supplies. We continuously evaluate and optimize our sourcing strategies to achieve cost-effective solutions. This includes negotiating favorable pricing agreements with suppliers, exploring alternative materials or sources and leveraging economies of scale to lower overall procurement costs. We are still experiencing some longer lead times for raw materials than prior to the pandemic. We leverage supply chain visibility and logistics optimization to mitigate risks and reduce lead times. We use a team effort in inventory management with sales, production, mechanics and maintenance all involved with supply chain staff to best inform the purchasing decisions being made.

Cheney: Supply chain challenges have eased recently, but vigilance remains key in our operations. We actively monitor lead times and maintain optimal stock levels to mitigate potential disruptions. Our focus on custom manufacturing necessitates keeping a broad selection of materials on hand,

ensuring we can swiftly and efficiently meet our clients’ unique requirements without compromise.

Rakusin: Fortunately, we are not faced with any supply chain issues in 2024. The past couple of years were challenging but our proven suppliers have done an excellent job resolving lead time issues.

Benjamin: Lately there have not been many supply chain issues. We carry a lot of stock which allows us to keep our lead time short. We also have great relationships with our vendors, who keep us up to date on changes in their delivery schedules.

How does your company handle sustainability and environmental concerns in the manufacturing process?

Acquaderni: SIT is treating sustainability at 360° from the social aspect where we achieved in 2023 a Gender Equality certification to the environmental aspect as now around 50 percent of our energy consumption comes from our solar panels over our factory.

Cheney: Our company adopts a meticulous approach in the manufacturing process of our industrial brushes. By focusing on custom-made solutions, we ensure that materials are utilized efficiently with minimal waste. Each brush is crafted to meet the precise specifications of its intended application, which not

www.brushwaremag.com | 61
Maker of handcrafted quality brushes since 1929 Producer of private label and branded brushes Two custom manufacturing facilities Family owned and operated Proud Member for 70+ Years. FM Brush Company, Inc. 70-02 72nd Place . Glendale . New York . 11385 Ph: 718.821.5939 Fax: 718-821-2385 www.fmbrush.com . email: info@fmbrush.com
America’s Premier Artist Brush Manufacturer

only enhances performance but also significantly reduces the consumption of resources. Additionally, we have implemented a refillable brush system for certain models, allowing the reuse of the core multiple times by refilling it with new fibers. This not only extends the life cycle of our products but also lessens our environmental footprint, reflecting our commitment to sustainability without compromising on quality or performance.

Clay: We have implemented several initiatives to minimize our environmental footprint and promote responsible practices. For example, we optimize our production processes to minimize waste generation during manufacturing. This includes efficient material usage and recycling programs to reduce waste sent to landfills. We have streamlined our purchasing process to buy only what is needed, in the right format, reducing excess inventory and minimizing waste associated with overstocking. We invest in energy-efficient technologies and equipment to reduce energy consumption in our manufacturing facilities. This includes upgrading to more efficient machinery and implementing energy-saving measures such as LED lighting and automated systems. We continuously upgrade our equipment to newer, more efficient models that consume less energy and produce fewer emissions. This not only reduces our environmental impact but also improves overall operational efficiency. We source sustainable materials whenever possible, prioritizing suppliers with environmentally friendly practices and certifications. This includes using recycled materials and biodegradable alternatives where feasible. We have robust waste management programs in place to properly handle and dispose of waste materials, including hazardous substances. This ensures compliance with environmental regulations and minimizes negative impacts on the environment.

Rakusin: Our process uses so many different materials that sustainability concerns are not easily addressed and resolved.

Benjamin: Precision Brush has had many programs for recycling and reusing boxes as well as limiting waste. It is one of our goals both for the environment as well as profitability. We are currently working on a system to automatically determine waste per order and will be incentivizing our employees to become more efficient.

How do you stay informed about industry trends and technological advancements, and how does this knowledge influence your product development?

Acquaderni: We have an R&D team inside our technical department and we incentivize a “culture of curiosity,” inviting every person in our company to contribute with ideas about product and process improvement. Moreover, since 2019, we started an Open Innovation program together with different partners such as the University of Bologna.

Rakusin: We have excellent relationships with our suppliers who do an outstanding job keeping us up to date with technological advancements within the brush industry and for

our needs in our extensive machine shop. Reading industry magazine articles and ads also helps keep us abreast of changes in the industry. Fortunately, the forced ending of InterBrush has been replaced by the new World Brush Expo in Bologna, Italy, this year. This will be the seventh time that I will have the opportunity to see the latest brush machinery in action. It’s disappointing that one of the leading manufacturers of brush machinery has divorced itself from the industry and will not be exhibiting.

Martinez: We adopt a customer-driven approach to innovation by actively monitoring industry trends and technological advancements. We achieve this by listening to our customers’ needs and preferences, incorporating their feedback into our product development process. We conduct ongoing market research to stay informed about changing industry dynamics and competitor activities. We collaborate with industry experts, research institutions, machine manufacturers and technology providers to access cutting-edge knowledge and expertise. This collective understanding of customer needs and market trends guides our product development efforts, ensuring that our solutions remain relevant, competitive and aligned with evolving industry demands.

Benjamin: We are constantly improving our technology and processes at Precision Brush. In fact, “Improvement” is one of four of our core values. Our product has not dramatically changed over time but the manufacturing process and internal processes are constantly changing and improving. We ask our team for ideas and keep in touch with other companies, both in the brush industry as well as in other manufacturing industries.

Cheney: We actively stay informed about industry trends and technological advancements through a variety of sources. Brushware magazine is a staple in our reading material, providing us with comprehensive insights into the brush manufacturing sector. Additionally, we subscribe to a range of news feeds, websites and blogs that cover a myriad of industries. The versatility in the application and industries where brushes are utilized continually surprises us. One of the most rewarding challenges of our work is the opportunity to rapidly acquaint ourselves with the specialized vocabulary of entirely new industries. This breadth of knowledge not only keeps us at the forefront of innovation but also significantly influences our product development, allowing us to tailor our brushes to meet evolving market needs and specific client requirements.

What kind of customer support and after-sales service does your company provide?

Benjamin: We have a Customer Service team that is very responsive in quickly providing quotes and addressing our customers’ brush needs to the best of our ability. Sometimes this involves creating samples, while other times it simply entails providing a quick quote. We rarely make manufacturing errors, so there is usually not much after-sales support required.

62 | www.brushwaremag.com
Industrial Brush Market Report

Rakusin: Gordon Brush makes very high-quality brushes and stands behind our manufacturing process. It’s rare, but when we have an issue with our products, we stand behind our products and do whatever we need to make it right for our customer.

Angie Elmore, Customer Service Manager, Schaefer Brush: Our customer service, engineering and sales team is available to provide technical assistance and guidance to customers, helping them with product selection, installation and troubleshooting. We offer customization services to tailor our products to meet specific customer requirements, ensuring they receive solutions that best fit their needs. Although customer complaints are rare, we honor warranty services and return and exchange policies. We maintain open lines of communication with customers, both through phone and email, responding promptly to inquiries, requests and feedback. Our goal is to address customer needs in a timely and efficient manner, fostering positive relationships and trust. We continuously seek feedback from customers to identify areas for improvement and enhance our products and services. Customer input is invaluable in driving innovation and ensuring that we meet and exceed customer expectations.

Cheney: At Braun Brush customer support starts at the first point of contact, either through our website (www.brush.com), email or via the phone. Striving to make it as easy as possible for customers to reach us is always our goal. We do not use automated attendants, opting instead for personal interaction. We endeavor to answer the phone within two rings, and you can reach anyone in our organization by going through, no more than one person. While we do have a 60-day guarantee on all our products, we encourage customers to contact us at any time to give us an opportunity to make the situation right. We want to make sure the customer is delighted with our products and service.

Acquaderni: Customer support and after-sales service is always provided by people with experience in our company, and not provided by chatbot.

Can you provide insights into the future direction of your company’s product development and any upcoming innovations?

Martinez: Three key areas of focus and upcoming innovations include, investing in advanced technologies such as automation and artificial intelligence to enhance the efficiency, precision and consistency of our manufacturing processes. These technologies will enable us to produce high-quality brushes more efficiently and cost-effectively. We recognize the importance of offering customizable and personalized solutions to meet the unique needs of our customers. We are expanding our capabilities to offer a wider range of customization options, allowing customers to tailor our brushes to their specific requirements. We continue exploring opportunities to integrate digital technologies such as IoT (Internet of Things) and data analytics into production processes to provide real-

time monitoring, predictive maintenance and performance optimization capabilities.

Benjamin: We are looking forward to the Expo in Bologna, Italy, and welcome new technology that will be presented there. It has been many years since the last show, and since then we have developed some internal improvements as well as purchased some equipment to make things more efficient.

Acquaderni: More than six years ago when we celebrated our 110th anniversary, we created a book and named it after our guiding principle, the “Ongoing Innovation.” That means both innovating day-by-day and also innovating in continuity with the past, without cutting our roots but continuing to build on those, maximizing the value of our experience, yet changing a little every day, with continuous improvement.

Rakusin: I can’t give away any secrets about what the future will be, but I can guarantee that Gordon Brush will continue to invest in state-of-the-art machinery, will look at acquisitions when they become available and make sure that we retain and grow our team. My 34 years at the helm have been a great ride, and I wish I could put in another 34.

www.brushwaremag.com | 63

US Manufacturing Breaks Through in March

Italy and the UK Also Move Into Growth Territory

The ISM U.S. Manufacturing PMI® jumped to 50.3 percent in March, up 2.5 percentage points from the 47.8 percent figure recorded in February. The reading put U.S. manufacturing into growth territory for the first time since October of 2022.

“Demand remains at the early stages of recovery, with clear signs of improving conditions. Production execution surged compared to January and February, as panelists’ companies re-enter expansion,” says Timothy R. Fiore, Chair of the ISM® Manufacturing Business Survey Committee. “Suppliers continue to have capacity but are showing signs of struggling, due in large part to their raw material supply chains.”

According to the report, the overall economy continued expansion for the 47th month after one month of contraction in April 2020. A Manufacturing PMI® above 42.5 percent, over a period of time, generally indicates an expansion of the overall economy.

The New Orders Index moved back into expansion territory at 51.4 percent, 2.2 percentage points higher than the 49.2 percent recorded in February. The March reading of the Production Index (54.6 percent) is 6.2 percentage points higher than February’s figure of 48.4 percent. The Prices Index registered 55.8 percent, up 3.3 percentage points compared to the reading of 52.5 percent in February. The Backlog of Orders Index registered 46.3 percent, the same reading as in February. The

Employment Index registered 47.4 percent, up 1.5 percentage points from February’s figure of 45.9 percent.

Panelists’ companies notably increased their production levels month over month. Headcount reductions continued in March, with sizable layoff activity reported. Inputs — defined as supplier deliveries, inventories, prices and imports — continued to accommodate future demand growth and showed signs of stiffening. The Supplier Deliveries Index dropped marginally, moving into ‘faster’ territory, and the Inventories Index improved but remained in slight contraction territory. The Prices Index moved further upward in moderate expansion (or ‘increasing’) territory as commodity-driven costs remain unstable.

US SECTOR REPORT

ISM® GROWTH SECTORS (9): ATextile Mills; Nonmetallic Mineral Products; Paper Products; Petroleum and Coal Products; Primary Metals; Food, Beverage and Tobacco Products; Fabricated Metal Products; Chemical Products; and Transportation Equipment.

ISM® CONTRACTION SECTORS (6): Furniture and Related Products; Plastics and Rubber Products; Electrical Equipment, Appliances and Components; Machinery; Computer and Electronic Products; and Miscellaneous Manufacturing.

www.brushwaremag.com | 65
economic DASHBOARD
Source data: Institute for Supply Management®, ISM®, PMI®, Report On Business® ISM® US MANUFACTURING PMI 36 MONTHS | MOVING AVERAGE: SIX MONTHS 35 40 45 50 55 60 65 Apr-21 May-21 Jun-21 Jul-21 Aug-21 Sep-21 Oct-21 Nov-21 Dec-21 Jan-22 Feb-22 Mar-22 Apr-22 May-22 Jun-22 Jul-22 Aug-22 Sep-22 Oct-22 Nov-22 Dec-22 Jan-23 Feb-23 Mar-23 Apr-23 May-23 Jun-23 Jul-23 Aug-23 Sep-23 Oct-23 Nov-23 Dec-23 Jan-24 Feb-24 Mar-24

MARCH ISM® REPORT COMMENTS (US Manufacturers)

“Business activity is up. Many manufacturers are anticipating better business in the second quarter and much better in the third quarter. They are reporting that second-quarter bookings are just starting to ramp up.” Wood Products

“Performance continues to defy projections of a downturn in activity. Demand remains strong, and the pipeline for orders is robust.” Chemical Products

“Expecting to see orders and production pick up for the second quarter. Suppliers are working with us to help drive costs down, which will help improve the margin for the rest of the year and deliver growth in 2025.” Transportation Equipment

“Commodity prices continue to hold steady.”

Food, Beverage and Tobacco Products

“Demand remains soft, but optimism is high that orders are ‘just on the horizon.’ Expectations are for a strong second quarter. Supply chain issues are minimal, with only semiconductors and select electronic parts being an issue.”

Computer and Electronic Products

“Noticing an increase in suppliers’ selectiveness regarding orders they quote and take. Additionally, there’s been a noticeable increase in manufacturing companies targeted for acquisition by larger entities (established companies, investment firms and the like).” Machinery

“Business is still strong — we are meeting and exceeding our forecasts. So far, we’re not hearing anything negative with our customers as far as ongoing business is concerned — it’s the same for raw material suppliers, nothing negative.”

Fabricated Metal Products

“As an energy-intensive manufacturer, energy pricing continues to be a concern for our business. The move to electrification has increased demand, and supply is not stable because we’re not in an ideal geography for wind and solar power.” Paper Products

“Continue to experience a softness in the industrial sector. There is optimism that order activity will increase in the late second quarter, leading to improvement in this segment for the second half of the year. The aerospace and defense market is continuing to ramp up, and demand is outpacing supply in our supply chain.” Primary Metals

GLOBAL MANUFACTURING

EUROZONE: The HCOB Eurozone Manufacturing PMI was reported at 46.1 percent for March, down from February, which was also down from the January figure. The downward trend seems to be the result of supply chain issues following the Suez Canal problem. New and export orders declined but at a slower rate. Growth projections were soft, but business optimism was up for the region.

CANADA: The S&P Global Canada Manufacturing PMI pushed up slightly in March to 49.8 percent continuing a third straight month of upward movement. The trend has Canadian manufacturing near growth territory, but the latest reading still represented an 11th straight month below the 50 percent line. Business optimism is still lukewarm but improved from the previous month. Businesses were optimistic enough to push up employment in anticipation of increased demand ahead.

CHINA: The Caixin China General Manufacturing PMI was reported at 51.1 percent in March as Chinese manufacturing continues to tick up slightly each month going back to a dip in October 2023. The trend is fueled by an increase in new domestic and export orders. Input prices were slightly lower which led to a third straight month of cuts to selling prices. Employment declined, but business optimism was strong based on predictions of improvement in global economic conditions.

FRANCE: After a jump of four points in February, the S&P Global France Manufacturing PMI slipped from 47.1 to 46.2 percent in March. The surge in February halted an overall downward trend for French manufacturers that dates back to May of 2021. While still firmly in contraction territory, output still declined but at a slower rate, resulting in a decline in employment. Business optimism is hopeful as the country’s manufacturers are anticipating improved economic conditions ahead.

GERMANY: German manufacturing saw a three-point drop in February that halted a six-month trend of improvement. For March, the HCOB Germany Manufacturing PMI registered further downward movement with a reading of 41.9 percent. The unexpected drop in February was attributed to weak demand in the country and abroad, dropping both new orders and output. Accordingly, employment also fell sharply. Looking ahead though, business optimism was up based on projections of improvement in economic conditions over the next 12 months.

INDIA: Manufacturing in India continues to be on a hot streak as the HSBC India Manufacturing PMI was reported at 59.1 percent for March, up 2.2 percent from February. According to the report, the March numbers represented the highest growth in manufacturing activity since February of 2008. Additionally, the country’s manufacturers have been in growth territory since

66 | www.brushwaremag.com economic DASHBOARD

ISM® MANUFACTURING AT A GLANCE (US)

MARCH 2024

*Number of months moving in current direction.

Source: Institute for Supply Management®, ISM®, PMI®, Report On Business®

June of 2021. Exports and purchasing were both up sharply and that led to strong growth in employment. Despite all of the positives, inflation did accelerate and that resulted in lower business optimism.

ITALY: Italian manufacturing jumped in March to move into growth territory as the HCOB Italy Manufacturing PMI was reported at 50.4 percent. The figure was up 1.7 percent from February and the first time Italian manufacturing has been in expansion territory since last March. New orders and output saw moderate growth, and factories added jobs for a second straight month. Input costs fell slightly and companies passed along the savings with a sharp drop in selling prices. Based on positive projections for the overall economy, business optimism was strong.

UNITED KINGDOM: U.K. manufacturing also jumped on the trend as the S&P Global U.K. Manufacturing PMI offered a reading of 50.3 percent for March, up from 47.5 percent in February. The push into growth territory ended a streak that dated back to August of 2022. The improvement resulted from increases in output and new orders with the consumer goods sector showing strong growth. From an inflation perspective, manufacturers saw increases in both input costs and output charges. The jobs decline slowed as business optimism improved sharply.

Credits: Institute for Supply Management®, PMI® (Purchasing Managers' Index), Report On Business®. For more information, visit the ISM® website at www.ismworld.org.

www.brushwaremag.com | 67
Series Series PCT Rate of Trend* Index Index MAR Index FEB PT Change Direction Change (Months) Manufacturing PMI® 50.3 47.8 +2.5 Growing From Contracting 1 New Orders 51.4 49.2 +2.2 Growing From Contracting 1 Production 54.6 48.4 +6.2 Growing From Contracting 1 Employment 47.4 45.9 +1.5 Contracting Slower 6 Supplier Deliveries 49.9 50.1 -0.2 Faster From Slower 1 Inventories 48.2 45.3 +2.9 Contracting Slower 14 Customers’ Inventories 44.0 45.8 -1.8 Too Low Faster 4 Prices 55.8 52.5 +3.3 Increasing Faster 3 Backlog of Orders 46.3 46.3 0.0 Contracting Same 18 New Export Orders 51.6 51.6 0.0 Growing Same 2 Imports 53.0 53.0 0.0 Growing Same 3 OVERALL ECONOMY Growing Faster 47 Manufacturing Sector Growing From Contracting 1

EURO AREA MANUFACTURING PMI

Source data: S&P Global CHINA MANUFACTURING

Source data: S&P Global FRANCE

Source data: Caixin Manufacturing PMI

Source data: S&P Global

68 | www.brushwaremag.com
36 MONTHS | MOVING AVERAGE: SIX MONTHS
economic DASHBOARD CANADA MANUFACTURING PMI
MANUFACTURING PMI 36 MONTHS | MOVING AVERAGE: SIX MONTHS
36 MONTHS | MOVING AVERAGE: SIX MONTHS
36 MONTHS | MOVING AVERAGE: SIX MONTHS
PMI
30 35 40 45 50 55 60 65 30 35 40 45 50 55 60 65 Apr-21 Jun-21 Aug-21 Oct-21 Dec-21 Feb-22 Apr-22 Jun-22 Aug-22 Oct-22 Dec-22 Feb-23 Apr-23 Jun-23 Aug-23 Oct-23 Dec-23 Feb-24 35 37 39 41 43 45 47 49 51 53 30 35 40 45 50 55 60 65 Apr-21 Jun-21 Aug-21 Oct-21 Dec-21 Feb-22 Apr-22 Jun-22 Aug-22 Oct-22 Dec-22 Feb-23 Apr-23 Jun-23 Aug-23 Oct-23 Dec-23 Feb-24

Source data: S&P Global

Source data: S&P Global

www.brushwaremag.com | 69
data: S&P Global INDIA MANUFACTURING PMI 36 MONTHS | MOVING AVERAGE: SIX MONTHS
Source
UK MANUFACTURING PMI 36 MONTHS | MOVING AVERAGE: SIX MONTHS ITALY MANUFACTURING PMI 36 MONTHS | MOVING AVERAGE: SIX MONTHS GERMANY MANUFACTURING PMI 36 MONTHS | MOVING AVERAGE: SIX MONTHS
data: S&P Global 30 35 40 45 50 55 60 65 70 25 30 35 40 45 50 55 60 30 35 40 45 50 55 60 65 30 35 40 45 50 55 60 65 70
Source

BRUSHWARE MARKETPLACE

LOOKING FOR

Buyer For Our Business

FOR SALE: Paint brush distributor. For further information contact us at featherduster@optonline.net.

CONTACT: Easy Dusting Corporation

PHONE: 518-469-0698

EMAIL: featherduster@optonline.net

FOR SALE

15 Gauge Wire for Street Brooms

Wright-Bernet Brush Company is offering a brand new drum of 15 gauge wire for street brooms. The asking price is $500 plus shipping and Wright-Bernet is based in Hamilton, Ohio.

CONTACT: James Cox

PHONE: 513-889-0500

EMAIL: Jimnwestern1@aol.com

Australasia’s Largest Specialist

Brushware Manufacturer Sale By Expression of Interest

The Industrial Brushware Group is pleased to present for sale its entire manufacturing, marketing and distribution operations. Established in 1992, the group has manufacturing facilities/ warehouses in Melbourne, Sydney, Adelaide and Brisbane within Australia and overseas facilities in Auckland (New Zealand), Batam (Indonesia) & Singapore making it an excellent opportunity for worldwide investors. With state-of-the-art production equipment, we produce and supply Custom made & Specialist Brushware throughout Australia and Southeast Asia to a broad range of industries. The Industrial Brushware Group has enormous growth potential and a turnover in excess of 10 million. If you are interested, please reach out via email at enquiries@industrialbrushware.com.au.

GET YOUR CLASSIFIED SPACE

Single classified ads are available to qualified/paid subscribers or advertisers of Brushware We accept listings of used merchandise/ machinery for sale or wanted in addition to job opportunities. Classified ads include a head line (10-word) limit, description (100word limit) and contact detail fields (phone, email, etc.). Acceptance of an ad is at the discretion of Brushware magazine.

Fill out your request form at: www.brushwaremag.com/classifieds

CONTACT: Gemicor Products Inc. Montreal Canada

PHONE: 514-747-9856

WHATSAPP: 514-445-9725

EMAIL: gemicor@Qc.aira.com

70 | www.brushwaremag.com
OSMAS Filling Machine Model A2E-90-FM610 (New Price) Osmas Filling Machine Model A2E-90-FM610. 2 Axis plus 3rd vertical axis copy valve. Excellent Condition; machine used only 2 months per year of service. Includes New Vortex CPU Control Card. Price Only $29,500 USD
BRUSHWARE DIGEST INDUSTRY LEADING NEWS www.brushwaremag.com/enewsletter

2024

May 14-17, 2024

Interclean Amsterdam | Amsterdam, The Netherlands

From May 14-17, RAI Amsterdam will turn into the capital of cleaning and hygiene. Join us for a four-day journey of forward-thinking, doing business with leading manufacturers and meeting industry professionals from all over the world. www.intercleanshow.com/amsterdam

May 22-24, 2024

World Brush Expo | Bologna, Italy

New expo set to launch in 2024 to serve the brush, broom, mop and paint applicator industry. The event is being held as a joint effort of the American Brush Manufacturers Association and the European Brush Federation. www.worldbrushexpo.com

September 9-14, 2024

International Manufacturing Technology Show | Chicago, Illinois

IMTS 2024 is where the creators, the builders, the sellers and the drivers of manufacturing technology come to connect, be inspired and find solutions. www.imts.com

October 10-12, 2024

64th FEIBP Congress Ibiza, Spain

The Annual Congress of the European Brushware Federation is a great opportunity to meet fellow manufacturers, contact suppliers and receive up-to-date information on the brush industry in Europe. www.eurobrush.com

October 15-19, 2024

Fakuma | Friedrichshafen, Germany

At the world’s leading trade event for industrial plastics processing, almost 1,500 exhibitors present their international range of products and services. Fakuma offers a comprehensive overview of all plastics technologies. www.fakuma-messe.de

November 18-21, 2024

ISSA North America | Las Vegas, Nevada

Staying up to date on the latest trends and solutions for cleaning, disinfection and infection prevention and pursuing accreditation, training and certification helps us further evolve the industry and change the way the world views cleaning. www.issashow.com

November 19-20, 2024

National Painting/Decorating Show | Coventry, UK

The National Painting and Decorating Show is the industry’s biggest annual UK event held at Ricoh Arena. If you use, sell, stock or specify P&D products, the exhibition is one you can’t afford to miss. www.paintshow.co.uk

December 5-7, 2024

Inbrush Expo | Delhi, India

India’s exclusive B2B event dedicated to brush manufacturing machinery and finished brushes held at Yashobhoomi, India International Convention and Expo Center, Delhi, India. www.indiabrushexpo.com

December 11-13, 2024

Interclean China | Chongqing, China

Interclean China is the only dedicated international trade show in China for cleaning and hygiene. The exhibition serves as the meeting place for all market leaders within the Asian cleaning sector.

www.intercleanshow.com/china

2025

February 2-7, 2025

Creativeworld | Frankfurt, Germany

Creativeworld is the world’s most important trade fair for the international hobby, craft and artists’ supplies sector and an inspiring treasure chest for the creative community. www.creativeworld.messefrankfurt.com

March 2-4, 2025

The Inspired Home Show | Chicago, Illinois

North America’s largest housewares trade show connecting not only buyer to seller, but also product to lifestyle and the industry to the consumer mindset. Every year, more than 52,000 home and housewares professionals from more than 130 countries converge upon Chicago to discover new housewares products and industry trends. www.theinspiredhomeshow.com

March 18-20, 2025

National Hardware Show | Las Vegas, Nevada

The National Hardware Show is the most comprehensive event, education and networking platform serving the hardware and home improvement industries. www.nationalhardwareshow.com

March 20-23, 2025

Cosmoprof Worldwide Bologna | Bologna, Italy

As the most influential global event dedicated to all facets of the beauty industry, Cosmoprof Worldwide Bologna has been a landmark event for more than 50 years. www.cosmoprof.com

March 23-25, 2025

IBS New York | New York, New York

See and test the quality of beauty products before making a purchasing decision at the International Beauty Show in New York. Salon professionals flock to this event to stock up on high-end product needs and check out latest developments in the beauty industry. www.ibsnewyork.com

March 25-28, 2025

ABMA Annual Convention | Austin, Texas

The American Brush Manufacturer Association’s 108th Annual Convention will be held in Austin, Texas. www.abma.org/convention/

October 14-16, 2025

DeburringEXPO | Karlsruhe, Germany

Leading Trade Fair for Deburring Technologies and Precision Surfaces. Exhibitors offer knowhow and solutions for the resultant demands placed upon deburring technologies in the form of systems, processes and applications, as well as services.

www.deburring-expo.de/en/

www.brushwaremag.com | 71
ask about our Nylon Stocking Program! call 888.833.1097 info@monahanfilaments.com U.S. manufacturing in America's Heartland!
industry EVENTS

advertiser INDEX

ABMA 64 www.abma.org

ArroWorthy .......................................................67 www.arroworthy.com

Bizzotto Giovanni Automation 21 www.bizzottoautomation.com

Borghi S.p.A. ...................................................03 www.borghi.com

Borghi USA.......................................................63 www.borghi.com

Brush Fibers Inside Back Cover www.brushfibers.com

Carnevali Dino .................................................41 www.carnevalidino.it

Celanese Filaments 12-13 www.celanese.com

DKSH ...............................................................55 www.dksh.com/ch-de/home

Edward Jackson Engineer Limited 14 www.edwardjacksonltd.com

FM Brush .........................................................61 www.fmbrush.com

Gordon Brush 23 www.gordonbrush.com

Gornell Brush ...................................................04 www.gornellbrush.com

Industrial Brushware Group 45 www.industrialbrushware.com.au

Leistner Drills ..................................................59 www.leistner-gmbh.de

MFC .................................................................47 www.mfc-usa.com

MGG North America 37 www.mggmeccanica.com

Mill-Rose Co., The ............................................01 www.millrose.com

Monahan Filaments 71 www.monahanfilaments.com

Paggin .............................................................57 www.paggin.it

Perlon/Hahl

Back Cover www.perlon.com

PMM Brightline ......................................... 15, 17 www.pmmbrightline.com

Roth Composite Machinery GmbH 35 www.roth-composite-machinery.com

Royal Paint Roller Mfg. Corp. ............................72

Schaefer Brush ................................................04 www.schaeferbrush.com

Stainless Steel Products 53 www.stainlesswires.com

Tai Hing Nylon ............................ Inside Front Cover www.taihingnylon.hk

Wöhler Brush Tech GmbH 19 www.woehlerbrushtech.com

Wolf Abrasive ...................................................31 www.wolfabrasive.com

Wolf Filaments 31 www.tidesz.com

World Brush Expo .............................................39 www.worldbrushexpo.com

Young & Swartz, Inc. 20 www.youngandswartz.com

72 | www.brushwaremag.com
Full Service Supplier: Boar Bristle all colors, 44 mm through 133 mm and Bulk (waste) sizes | Ox-Ear Hair | Badger Hair Horse Hair | Goat Hair | Synthetic Paint Brush Filament, Bristle/Synthetic Mixes Vegetable Fibers: Tampico | Palmyra | Coco Fiber | Arenga Plus: Plastic Brush Blocks | Staple Wire 888.833.1097 Shipping within 24 Hours Warehousing info@brushfibers.com | www.brushfibers.com Great Results Start with Great Materials NaturalUsingFibers Since1979

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.