Pallet Racking accessories

Accessories Pallet racking City

Accessories for safe and smart pallet storage By equipping your storage system with the right accessories and protection, you can not only extend the lifespan of your racking but also create a safer working environment for your employees.

Our pallet racking system City is designed for maximum flexibility and efficient logistics in goods handling – regardless of industry. The system comes with a complete range of accessories and can therefore be tailored to your specific needs.

Contact us at BLS AB for more information about our accessories Tel. +46 (0)370-30 50 00 info@blsab.se blsracking.com

Beam Shelf

Wire Mesh Deck

Used as a shelf level in a section.

Galvanized steel.

Used for storing lighter goods that are not placed on pallets. Galvanized.

Long Side Inserts

Distance Inserts

Pull-out unit

Drum Inserts

Suspension for pallet support

XL Foot High

Support for oil drums. Powder coated.

Used when entire sections are intended to support half pallets. Powder coated.

Asphalt Plate

Leveling Plate

Tool Holder

Used as support when handling goods from the long side. Powder coated.

Used when mounting on softer surfaces to distribute pressure from above. Compatible with post protectors and upright protector guards. Powder coated.

Used as support for flat goods without pallets; requires two units to handle the load. Powder coated.

Used for positioning frames on uneven floors. Galvanized.

Divider Wire Mesh Deck

Complete your wire mesh shelf with dividers to separate loose goods. Galvanized.

Available as beam-mounted or floor-mounted.

Powder coated.

Heavily dimensioned for, among other things, higher structures, soft surfaces, and asphalt. Can be used with post protectors. Bolted to the floor. Powder coated.

Grips both round and square shafts.

Wooden Panel

Distance Spacer

Maintains spacing between sections in double racking. Use 2 units for uprights up to 7 meters, then one every 3 meters. Galvanized.

Cable Rack

Used to store smaller goods that are not placed on pallets. Slats included.

Upright Protector

Collision Guard H: 400 mm

Collision Guard H: 200 mm

Frame Protector low

Frame Protector high

Safety Mesh

The post protector safeguards the upright at the end of the pallet rack in case of collision and is used when it is not possible to install an upright collision guard. The post protector is mounted on the outside of the upright using 4 screws. Powder coated.

Protects the end frame in case of collision.

Bolted to the floor. Height: 200 mm.

Powder coated / Galvanized.

Protect the frames upright from collisions by equipping the pallet rack with a collision guard. The guard is easily mounted in front of the upright and secured to the floor with 4 bolts. Height 400 mm. Powder coated.

Protects the end frame in case of collision. Bolted to the floor. Height: 400 mm.

Powder coated / Galvanized.

Manual. Powder coated. Maximum load capacity: 500 kg.

Protect the frames upright from collisions by equipping the pallet rack with a collision guard. The guard is easily mounted in front of the upright and secured to the floor with 4 bolts. Height 200 mm. Powder coated.

Prevents loose goods from falling off the pallet racking. Powder coated.

Push-through protection – Horizontal

A horizontal push-through protection prevents pallets from being pushed too far into the racking and falling through. Galvanized

Label Holder – Plane

A label holder that makes it easy to label your storage system. The holder protects your label and extends its lifespan. For easy label installation, the holder has an open top, and it can be attached with tape or magnets.

Aisle Sign Holder

Aisle sign for hanging signage and information.

Ideal for aisle identification in your warehouse.

Mounted using self-adhesive tape or magnet.

Push-through protection – Vertical

A vertical push-through protection prevents pallets from being pushed in too far, thereby reducing the risk of collapse. Galvanized.

Label Holder – Angled

A label holder that makes it easy to label your storage system. The holder protects your label and extends its lifespan. For easy label installation, the holder has an open top, and it can be attached with tape or magnets. Angled 27° or 45°.

Aisle Sign Holder – Angled

Aisle sign for hanging signage and information.

Ideal for aisle identification in your warehouse.

Mounted using self-adhesive tape or magnet.

Angled 90°.

BLS AB · Box 12 · 335 04 Hillerstorp · Sweden +46 370-30 50 00 · blsracking.com