WAX INJECTOR SYSTEMS FOR CASTING
8 STEPS UP AHEAD THE OTHERS 1 – Transparent tank always under vacuum (it removes micro bubbles and dampness) 2 - Possibility of dividing the tank for different waxes 3 - Possibility of having till 4 working positions in the same machine 4 – Vacuum meter: it is used to measure the vacuum level into the mould (the injector starts when the vacuum reaches 100%) 5 - Syringe for regulating the pressure and the injection temperature(it easy and accurate on minimum quantity of wax) 6 – Auto centring clamp for moulds with different thickness (no support is required) 7 - RFID reader of the mould (it reads the parameters saved on the mould)
8 - A 3,8” Touch screen New wax injection process based on hydrosoluble resins. It will possible to realize 3D filigreed and hollow pieces using normal and standard wax and over going the removal boundary of the interior part of the mold. Injection of hydrosolube resìn into the mold Putting the piece made in Hydroresin into the mold n.2 Injection of wax into mold n.2 Extracting the wax piece with hydroresin core Dipping the piece in cold water and dissolution of internal core Obtaining hollow piece
99