February 2024 | Issue 148
UNRIVALLED EXPERIENCE AND EXPERTISE IN GREEN BEDDING With more Separators and Green Bedding systems installed UK and Worldwide, Bauer is uniquely qualified to provide advice, products and support for your Green Bedding System
■
ECONOMICAL
■
ALWAYS AVAILABLE
■
INCREASED COW COMFORT
■
CLEANER COWS
■
NO DUST
“Cows have cleaned up no end definitely as clean as cows on sand and the number of mastitis cases has dropped dramatically.”
Defra permit the use of RMS (Recycled Manure Solids) as bedding for dairy cattle. Farms using RMS must notify APHA and Red Tractor
“Having an unlimited supply of material means you can use more of it.” Contact: Adrian Tindall T 07708 919 597 E a.tindall@bauer-at.com
Rob Jackson T 07939 410 417 E r.jackson@bauer-at.com
February 2024 | AgriNews | 1 www.fan-separator.de
2 | AgriNews | February 2024
CONTENTS
AGRI NEWS MEDIA LIMITED
Page 4
Page 5
The DeLaval plus is unveiled at Dairy-Tech
Why choose an electric lawn tractor?
Page 10
Page 14
Three new power harrows added to Kuhn tillage range
Who choose a Kioti HX Series tractor?
Page 22
Page 24
Boumatic introduces Xpressway 3.0
Boumatic introduces next gen Gemini Milking robot
Page 30
Page 40
Steve Birchall: Keeping it in the family
Chief executive for new Agri-Tech centres announced
If you would like to advertise your business or promote an event within Agri News Media Limited please contact us on the following details: Vicky: 07577 225275 vicky@agrinewsmedia.co.uk www.agrinewsmedia.co.uk February 2024 | AgriNews | 3
NEWS
THE DELAVAL PLUS IS UNVEILED AT DAIRYTECH
DeLaval is looking to revolutionise dairy farmin with data from thousands of farms and tens of millions of milkings. additional technology to benefit from DeLaval Plus. “We have some trial farms up and running in the UK already and expect to roll out DeLaval Plus later this year,” adds Mr Hayward. DeLaval Plus is an evergrowing set of applications that its creators say represent the most advanced level of farm management analysis and reporting. The volume of data has removed the capacity eLaval is looking to of three shortlisted for a for people to interpret it. revolutionise dairy prestigious Royal Dairy Therefore, DeLaval has farming with data from Innovation Award. developed unique AI to thousands of farms and interpret the data and find tens of millions of milkings. “It is about providing trends in cow health and Global milk yield and cow the tools that turn all the productivity. This enables health data is being shared data collected from every one farm to see its data and interpreted by artificial DeLaval herd worldwide in relation to data collated intelligence (AI) to provide into actionable, easy to individual farms with understand information. This globally and to make decisions based on global benchmarking and advice. helps make faster, more accurate decisions that can trends as well as daily onDeLaval Plus is a new improve milk production and farm variables. data-sharing application, cow health,” says DeLaval’s “Soon our team will be exclusively available to Adam Hayward. offering performance plans DeLaval farms, which provides more information Data collected from parlous, for farms to maximise the value and relevance of in a way that is easy robots, collars and body data collected on-farm. to understand. This conditioning scanners is This will enable decisions pioneering technology has being interpreted, collated to be made with facts to been recognised by the and used to identify trends. help farms operate more organisers of Dairy-Tech, DeLaval farms signing up efficiently,” concludes Mr and DeLaval Plus is one in the UK will not need any Hayward.
D
4 | AgriNews | February 2024
NEWS
STIGA UK: WHY CHOOSE AN ELECTRIC LAWN TRACTOR?
Discover a new way of cutting grass with our electric lawn tractors. An unprecedented experience that combines excellent cutting performance.
D
iscover a new way of cutting grass with our electric lawn tractors. An unprecedented experience that combines excellent cutting performance, easy maintenance, smart handling and a new way of mowing grass. From user-friendly controls to smoother, more comfortable driving over large areas, discover the joy of easy, emission-free lawn care. Revolutionizing Lawn Care with Innovative and Eco-Friendly Solutions STIGA has been at the forefront of introducing electric-powered garden equipment, ranging from small machines for home gardens to more complex ones for larger areas. We strive to change the way people approach lawn maintenance, by offering cutting-edge and eco-friendly alternatives. Explore the benefits of choosing a STIGA electric tractor for your lawn care needs. 1. Designed for very large lawns Thanks to large cutting decks of up to 108 cm and integrated ePower batteries, our lawn tractors can effortlessly cover areas of 3000 to 7500 m² on a single charge. Discover the joy of mowing large lawns without interruption thanks
Southam Agricultural Fields Farm, Station Rd, Southam CV47 2DH t: 01926 813426 www.southamagri.co.uk
to STIGA's advanced ePower battery technology.
mowing the lawn with a STIGA electric tractor
Next month we will take a closer look at STIGA ePower technology, so stay tuned!
Get more power and cutting performance from your batterypowered tractor with less maintenance. In fact, with STIGA electric tractors, you will never have to change spark plugs, air filters, oil, or engine parts again!
2. A better cutting experience Innovation Meets Power: Our Electric Tractors Years of experience in designing petrol garden machines have culminated in our electric tractors, which offer unparalleled cutting and collection performance, as well as an enhanced gardening experience. Our battery-powered machines have been improved to meet and exceed your expectations. Eco-friendly Gardening: An improved experience for you, the environment, and the people around you. Manoeuvrable and precise, they offer a smooth driving experience with no exhaust fumes, less noise, and less arm vibration, guaranteeing a comfortable cutting session. Additionally, with the One Pedal Drive system and the STIGA electric drive, you can control all functions with just one foot, accelerating and decelerating effortlessly and with maximum control.
Explore our range of ePower garden tractors and find out more here. Man that is
3. Smart and intuitive management Enhance Your Lawn Care with Smart and Connected Technology Make the most out of your lawn care routine by going hightech. Attach your smartphone to the steering wheel to create a dynamic dashboard, and open the STIGA.GO app. Get real-time advice on how to adjust your mowing to suit your lawn's condition, and receive maintenance alerts to stay informed about your tractor's status. You can even contact your dealer directly through the app in case you need any help. 4. Long-term investment The Long-term Benefits of Switching to an Electric Lawn Tractor Choosing an electric lawn tractor is a smart investment in both environmental and economic terms. By opting for battery power, you can help reduce greenhouse gas emissions while mowing your lawn. This is especially important as we transition to more eco-friendly solutions. Plus, electric tractors often have lower running costs due to reduced maintenance.
February 2024 | AgriNews | 5
NEWS
DEVELON LAUNCHES NEW DX17Z-7 AND DX19-7 MINI EXCAVATORS
Develon (formally Doosan Construction Equipment) has launched the new DX17z-7 zero tail swing and stage V compliant mini excavators DEVELON (formerly Doosan Construction Equipment) has launched the new DX17Z-7 zero tail swing and DX197 conventional Stage V compliant mini-excavators. Both new models provide significantly increased performance, versatility, operator comfort and easier maintenance than the previous generation machines they replace. Both models are powered by the Kubota D902 Stage V compliant diesel engine providing a 20% higher gross power output of 12.1 kW (16.2 HP) at 2400 RPM. The engine also offers a 25% larger displacement and a 29% increase in engine torque to 54.6 Nm at 1900 RPM, translating into high overall reliability and reduced strain on the engine and other components. As well as increased efficiency, the Kubota D902 engine is wellknown for its high reliability, ease of maintenance and long service life. Versatile and Durable Upper Structures Featuring the new shared global styling for the next generation Develon miniexcavator range, the novel platform design and new upper structures in the DX17Z-7 and DX19-7 provide 6 | AgriNews | February 2024
increased durability and robustness. The compact dimensions of both machines make them ideal for work in confined spaces on construction, landscaping and utility projects. Both the DX17Z-7 and DX197 have a 1.75 m boom and 1.03 m arm as standard, with an optional longer 1.23 m arm available for both models. The DX17Z-7 has a cast 180 kg counterweight as standard with an additional 85 kg counterweight for use with the optional longer arm. The tail swing radius in the DX17Z-7 has been reduced by 6.5% to only 645 mm compared to the previous model. The tail swing radius increases to 720 mm when the additional 85 kg counterweight is used. An integral 65 kg cast counterweight is used in both the standard and longer arm versions of the DX19-7. The front assembly in both the DX17Z-7 and DX19-7 is protected by cylinder guards to avoid collisions or any kind of potential damage, with an optimal hydraulic hose layout which runs through and is protected by the boom structure. This reduces the risk of hose damage and failure, minimizing the need for repairs and downtime and increasing equipment
productivity and efficiency. Flexible Hydraulics One- and two-way proportional flow is provided as standard with easy access to the selection valve. Flow is easily controlled via a thumbwheel on the right hand joystick, providing better flow control and increased operator convenience. With quick coupler piping already available on both models, the operator can switch to using a quick coupler by pressing a safety button on the left console - bringing up a warning message on the 5 inch digital display in the cab to notify the operator, who can then simply push a button on the right hand joystick to begin quick coupler work . The DX17Z-7 and DX197 are both equipped with retractable 230 mm tracks, where the width between the tracks can be automatically reduced from 1290 mm to 994 mm and both machines have a foldable blade. This allows operators to adapt the width and dimensions of the miniexcavators to navigate through narrow spaces. This is accomplished by pressing another switch, which allows the operator to use the blade lever to adjust the width of the tracks. The adjustable width
NEWS
DEVELON LAUNCHES NEW DX17Z-7 AND DX19-7 MINI EXCAVATORS
Both models provide significantly increased performance, versatility, operator comfort and easier maintenance. allows operators to distribute the weight more evenly, reducing ground pressure and providing increased stability while digging or lifting. The retractable tracks are also convenient for transportation. The DX17Z-7 is available as a canopy machine, whilst the DX19-7 can be supplied with either a canopy or a cab. Both machines share a common set up for the joystick and switch controls: Left hand console controls ∙Left hand joystick for control of swing and arm movements ∙Quick coupler switch ∙Engine speed control lever ∙Work light switch Right hand console controls ∙Right hand joystick with controls for the horn, breaker switch, the thumbwheel for the one- and two-way hydraulics and the quick coupler switch ∙Blade control lever ∙Track retraction/extension switch ∙Travel alarm switch ∙Rotating beacon switch ∙12V socket For enhanced control for the operator, the Travel Speed Switch is integrated with the travel control levers, providing quick speed adjustment
and improved controllability. The travel speed pilot lamp lights ON on the 5 inch digital display ensuring that the operator is aware it is engaged.
This also prevents temperature related damage such as moisture buildup. The heater switch is positioned on the right hand side of the console
The new 5 inch Digital Display replaces the simple gauge panel on the previous models and shows important operator information on the screen. The information includes safety features, such as warning indicators for issues with the machine announced with a buzzer sound.
- it has a two step operation between Low and High fan speed. A mechanical suspension seat is standard for both models, which can be multiply adjusted to take in the differences in body shapes and sizes of operators.
Maintenance intervals can also be monitored on the display, contributing to proactive maintenance and minimized downtime and repair costs.
LED lights and a rotating beacon are also standard on both models, promoting safety by enhancing visibility for the operator and by alerting other personnel on site, providing a secure and comfortable working environment in all lighting conditions. The DX17Z-7 has an LED lamp as standard on the boom, whilst the DX19-7 has a light on the boom (in both the canopy/cab versions), with another light on the top of the rear section of the cab in the cabbed version.
The cab version of the DX197 has a radio, providing entertainment and a comfortable environment for the operator. The DX19-7 cab is supplied with a heater as standard (with air circulation via three air vents), ensuring excellent conditions for the operator in cold weather and extending the working season. Working with the door closed, For more on DEVELON, no noise and dust enters the please visit the website: cab. https://eu.develon-ce.com/en/ A fast defrost system ensures permanent clear visibility and a safer working environment.
February 2024 | AgriNews | 7
NEWS
JOHN DEERE PRESENTS NEW SELFPROPELLED SPRAYER
Smart, compact and featuring a front cab; the new 300m expands John Deere’s self-propelled sprayer portfolio in compact segment
S
mart, compact and featuring a front cab; the new 300M expands John Deere's self-propelled sprayer portfolio in the compact segment. Featuring the latest Precision Ag technology, a minimum turning radius and two types of boom with or without air sleeve, the 300M is the new specialist sprayer for narrow areas and high-value crops. With the 332M and the 340M, two model variants are introduced. The 332M offers a tank size of 3200 litres and a 175 hp 4-cylinder John Deere engine. A boom width of up to 28 metres and a turning circle of 3.8 metres are ideally suited for work in narrow areas. The 340M has a tank size of 4000 litres and a working width of up to 36 metres. This width, the 225 hp 6-cylinder John Deere engine and a turning circle of 4.2 metres facilitate high performance and compact operation at the same time. With their compact design and all-wheel steering, both variants of the 300M are suited for narrow roads and field work in any situation. Automatically adjustable track 8 | AgriNews | February 2024
width from 150-180cm, 180225cm and 225-300cm allow flexible use in all types of crops, including high-value.
crop and swirls the spray into the foliage making it ideal for lettuce, vegetables and strawberries.
The 50:50 weight distribution reduces soil compaction and makes work possible even under difficult conditions.
The PowrSprayTM two-circuit liquid system design is also a key feature on the 300M. It offers fast filling of up to 600L/min and a highly precise output of 750L/min at three bars. With its unique design and fast response time of only three seconds from minimum to maximum, the centrifugal spray pump with direct rate control offers an accuracy of 98%.
The John Deere 300M is equipped with the latest John Deere Precision Ag essentials, such as the StarFireTM Receiver, the G5Plus Universal Display and JDLinkTM. The new cab position provides excellent all-round and boom visibility. The suspended and heated seats provide the best comfort, and the new CAT 4 cab is equipped with the latest filter technology. Both models of the 300M are offered with a steel boom and a stainless-steel boom with air sleeve. Both are available with Individual Nozzle Control. Particularly when used in high-value crops, the airassisted boom of the 300M provides excellent coverage of tall and leafy crops by increased penetration of the crop canopy. Smithfield Tractors The air curtain opens the
PowrSprayTM technology, already used on the trailed model R700i, offers a variety of advantages such as stress-free filling thanks to ActivePause and the 50-litre PowrFill eductor. The John Deere 300M will be available in France, Poland, Spain and the UK with the model year 2024. Other countries will follow in the next few years.
Llanelwedd Builth Wells, LD2 3SR t: 01982 553221 www.smithfieldtractors.co.uk
SLURRY SEPARATOR
UNRIVALLED EXPERIENCE AND EXPERTISE IN SEPARATION AND PUMPING TECHNOLOGY BAUER POLYESTER TANKERS YOUR ADVANTAGES: • Low ground pressure • Minimum compaction • High capacity pumps
• Heavy duty galvanised chassis • Strong non corrosive tanks • Wide range of distribution systems
MOST EFFICIENCE AND COST EFFECTIVE Eccentric screw pump HELIXDRIVE
Submersible pump MAGNUM CSPH
Submersible motor mixer MSXH
Polyester tankers with trailing shoe applicator, from 10.500 up to 24.000 liters
Centrifugal pumps MAGNUM
NEW! Tractor mixer MTXH-L
ECKART Mixers for Biogas
NEW! PLUG & PLAY portable pump and separator unit for multi-site operation
Contact your local BAUER dealer or Adrian Tindall / Sales Manager - UK & Ireland 07708 919597, a.tindall@bauer-at.com, www.bauer-at.com February 2024 | AgriNews | 9
NEWS
THREE NEW POWER HARROWS ADDED TO KUHN’S TILLAGE RANGE Kuhn Farm Machinery has expanded its range of folding power harrows with two new 6m models and a 5m unit
K
UHN Farm Machinery has expanded its range of folding power harrows with two new 6m models and a 5m unit aimed at operators looking to increase outputs and make transitioning between fields quicker. For the first time, KUHN’s HR 1030 R range features folding machines, with the HR 5030 R and HR 6030 R becoming the new flagship models in the range and suitable for tractors up to 350hp. They join the existing rigid models from 3m-4.5m. The single beam design on the HR 1030 R machines allows easy access to the gearbox and transmissions for maintenance, while rear lift requirements are lower thanks to a close coupling design. Existing options featured on the new models include working depth and levelling bar adjustment in manual or hydraulic format.
10 | AgriNews | February 2024
A 6m HR 6042 R model suitable for tractors up to 460hp joins the larger 7m and 8m models in KUHN’s high output folding power
of power harrows come with DURAKUHN tines as standard, with the option of DURAKARB, featuring tungsten carbide inserts to increase longevity. KUHN’s FAST-FIT tine fitting system is standard and reduces the time spent changing metal. A choice of three rollers is available on the new models. KUHN’s 520mm
MAXICRUMBLER; the 535mm MAXIPACKER; or the largest 590mm MEGAPACKER offer users a variety of options depending on the required finish. Track eradicators to loosen soil behind the wheels are also available.
harrow range. The HR 6042 R comes with an oil cooler to protect the reinforced central gearbox from overheating The HR 5030 R starts at during long days. Two side £47,440, while the HR DUPLEX gearboxes make 6042 R is £56,375. it possible for the operator to adjust rotor speed to suit ground Southam Agricultural conditions. As standard, the new trio
Fields Farm, Station Rd, Southam CV47 2DH t: 01926 813426 www.southamagri.co.uk
UNRIVALLED EXPERIENCE AND EXPERTISE IN SEPARATION & PUMPING TECHNOLOGY
MSXH
Submersible motor mixer
MAGNUM
Centrifugal pump
SEPARATOR
MAGNUM CSPH Submersible pump
HELIX DRIVE
Eccentric screw pump
MTXH-L
Tractor mixer
PLUG & PLAY
Portable pump and separator unit for multi-site operation
Contact: Adrian Tindall T 07708 919 597 E a.tindall@bauer-at.com
Rob Jackson T 07939 410 417 E r.jackson@bauer-at.com
www.bauer-at.com
February 2024 | AgriNews | 11
AM
POWER SOLUTIONS LTD Generators & Off Grid Power Systems
01554 890510
info@ampowersolutions.co.uk
www.ampowersolutions.co.uk
12 | AgriNews | February 2024
With well over 100,000 followers and growing across the key social media platforms and with links to rural policing initiatives we’re committed to alerting the rural community to ongoing crimes to help stop the criminals in their tracks. Rural crime costs in excess of £49M per year! Join thousands of farmers, landowners and others living in rural areas to help us stamp out rural crime.
facebook.com/farmwatcher twitter.com/FarmWatcherUK linkedin.com/company/farmwatcheruk
#FWUKLetsWorkTogether
The UK’s No.1 Rural Crime Alert Network February 2024 | AgriNews | 13
WHY CHOOSE A KIOTI HX SERIES TRACTOR?
The tractors in the Kioti HX series are perfect for a wide variety of tasks. Luxury cabin, turbocharged CRDI diesel engine, easy to use
A
ll tractors in the HX series have comfortable, luxury cabins. The 5-post cabin design with glass sunroof gives perfect all-round visibility. The swiveling air suspension seat with control arm rest puts the operator in the perfect position for a good days work.
the strictest European environmental requirements.
The powerful Kioti Stage V 4-cylinder diesel engine guarantees a perfect power reserve at any speed. A modern, quiet and lowvibration motor that meets
If you’re looking for a very powerful tractor for all the work that needs to be done around the farm and on the land, the Kioti HX series is the right choice for you. These
The HX tractors are equipped with a brightly lit, well-arranged dashboard. The operator can easily see the display and reach the switches and control levers that are perfect positioned for easy use.
HX9010 | HX1001 | HX1201
92 - 127 hp
HX SERIES
E
are the heaviest tractors in the Kioti family (103 – 125 hp). Tough, reliable and very manoeuvrable. Thanks to the large lifting capacity, whether it’s cultivating the land, haymaking, moving around heavy materials or pulling trailers, the HX series tractors are up for the job. The HX tractors when fitted with the optional front end loader become the perfect livestock tractor.
PERIENCE COMFORT RELIABILITY VERSATILITY PERFORMANCE SCAN FOR
M O R E
INFO
5 YEARS’
(3,000 Hours)
WARRANTY
AGRICULTURE
To EXPERIENCE the HX contact
14 | AgriNews | February 2024
www.kioti-uk.com sales@kioti-uk.com 01480 401512
THE KIOTI MECHRON WITH A NEW LOOK AND NEW CAPABILITIES! • 3 cylinder 24 hp economical diesel engine • Room for 3 persons to sit comfortably. • Various options cabin sun canopy etc • High ground clearance 31 cm • Urethane coated load space • Homologated for road use
QUALITY, STRENGTH, 2 YEAR WARRANTY AND VALUE FOR MONEY! DEALERSHIPS ARE STILL AVAILABLE
FOR MORE INFORMATIONS CONTACT WWW.KIOTI-UK.COM 01480 401512 SALES@KIOTI-UK.COM
Kearsley Tractors, Streetlam, Northallerton, North Yorkshire, DL7 0AR | t: 01325 378042 Day & Coles (Agricultural) Ltd www.kearsleytractors.co.uk Newton Close, Park Farm Industrial Estate, Wellingborough, NN8 6UW t: 01933 673900Ltd, | www.dayandcoles.co.uk Martin Pears Engineering Three Corners, Halwell, Totnes,
Devon, TQ9 7JE | t: 01548 521429 www.mpearsengineering.co.uk GB Farm Services Ltd
Unit 1, Frating Hall Farm, Church Road, Colchester, CO7 7HD Mike Pryce Agricultural & Son, Greenfield Farm, Four Crosses, t: 01206 250990 | www.gbfarmservices.co.uk Llanymynech, SY22 6RF | t: 01691 830308
www.mikeprycemachinery.com
Greenheath Limited Toggam Farm, Newfen Gravel Drove, Sedge Fen Road, Sovereign Agricultural Services Ltd, Woolrow Lane, Huddersfield, IP27 9LN HD8 Lakenheath, 8LW | t: 01484 603682 t: 01842 862068 | www.greenheath.co.uk
www.sovereignagriculturalservices.com
February 2024 2021 || AgriNews AgriNews || 15 17 February
NEWS
DEALER’S PROGRESSIVE SUCCESSION PLAN PROMPTS MACHINERY AUCTION
Auction to streamline hire fleet ahead of management change. Tractors, telehandlers and implements on offer
P
rogressive business restructure secures longevity of successful dealer. Auction to streamline hire fleet ahead of management change. Tractors, telehandlers and implements on offer at dispersal on 28th February 2024 Agricultural machinery auctioneers Cheffins will conduct a live onsite auction on behalf of Lincolnshire dealer Irelands Farm Machinery, following an effective succession plan that will safeguard the future of the well-respected agricultural dealership, under the guidance of a new management team. Founders Jonathan and Fiona Ireland will step back from day-to-day management of the dealership in April and hand over the reins to an experienced young team, who are familiar with the business and have the enthusiasm required to take it forward. The positive move also involves a restructure of the hire fleet, which offers the business a chance to sell items such as tractors, telehandlers and other machinery via the auction.
16 | AgriNews | February 2024
Jonathan Ireland says the decision to retire has been made easier as the existing team wants to be part of Irelands for years to come. “We are both extremely happy with the decision. Most of the new management team have been with us for several years and have taken responsibility from an early age at the sharp end of the business. They have become experienced in many aspects and, most importantly, they have our trust. “Following this decision, and after much deliberation, we have decided to restructure the hire side of business, streamlining and selling some of our current stock of tractors, forklifts and implements, along with machines that we had planned to replace and update later this year. The hire business will still operate, and the reorganisation of our fleet will be beneficial for the new team.” Established in 1994, Irelands Farm Machinery has successfully grown into a respected dealership, selling major machinery brands such as Kubota, Bunning, Stewart, Kverneland and Spearhead among several others. It has effectively expanded its area over the years to three
depots across Lincolnshire in Carrington, Sutterton and Market Rasen. The sale will include 20 modern John Deere and Kubota tractors that are in excellent condition and range in size up to 250hp. Alongside these machines are four JCB telehandlers; 16 grain and root crop trailers; implements including mowers, cultivation equipment and fertiliser spreaders; and several UTVs. Oliver Godfrey, Director, and Head of Machinery at Cheffins, said the company should be praised on its progressive management to secure a bright future for the three depots. “This is great example of where a clear and well executed succession plan has allowed a successful business to continue supporting its customer base with an experienced new team at the helm. Holding an auction provides an effective way for the business to streamline current stock and offer the new team a fresh start.” More information and the full catalogue can be found on the Cheffins website with the sale taking place on Wednesday 28th February 2024 at Irelands’ Carrington depot in Lincolnshire.
NEWS
BOBCAT UPGRADES COMPACT WHEEL LOADER PORTFOLIO L75 and L85 updated with features from the top-of-the-range L95
I
n 2021, Bobcat launched the company’s first compact wheel loader (CWL), the L85. In 2022, the company added the L75 value model and in 2023, Bobcat launched its topof-the-range premium model, the L95. As part of Bobcat’s continuous improvement programme based on customer feedback, the company has announced annual updates for the L75 and L85 for model year 2024, allowing owners of the latest versions of these machines to benefit from some of the advanced features that were introduced last year on the L95. Award-Winning Wheel Loaders The Bobcat compact wheel loader range continues to win awards. The L85 was announced as a Product discipline winner in the 2021 edition of the world-renowned iF Design Awards. In September last year, the L75 and L85 won in the Product Design category in the international BIG SEE awards promoting unique and original creative achievements. With the award-winning designs of all three models, Bobcat has ensured that they share the same high level of standard features, providing high operator comfort and
ease-of-operation, including: ∙Heated cab designed around the operator ∙Joystick integrated with the suspension seat ∙Steering wheel adjustable in two directions ∙Key ignition with quick StartStop ∙Automatic parking brake to automatically engage and disengage, as required ∙5-inch digital screen with machine’s vital information managed via the jog shuttle control New features on the L75 and L85 (2024 model year) Power Bob-Tach (NEW) – factory option for L85 This provides a highperforming Bobcat attachment connection for applications in which maximum capacity for load and carry by bucket and pallet fork is not as important as connectivity to multiple Bob-Tach compliant attachments shared on the same job site with Bobcat skid-steer and compact track loaders. Heated Air Suspension Cloth Seat (NEW) – factory option The cab seat now offers a higher back rest with a head rest, together with air suspension set-
up, lockable floating and left-hand adjustable arm rest, providing a new level of operator comfort on the L75 and L85. The cloth surface of the seat with heating added improves the operator’s comfort all year round − in both cold and hot weather. The seat also includes a sensor to indicate operator presence and to enhance safety (by inactivating auxiliary flow). Advanced Attachment Control (Improved) – standard configuration in L85 / factory option in L75 Bobcat has improved the advanced attachment system by adding new features that make the operator’s life easier. The new flex-drive feature allows the operator to change the engine’s RPM by manual throttle, independently from the foot throttle, at any time during operation. With this change, Bobcat has also provided auto-idle functionality when the machine is not in use for four seconds to reduce fuel consumption. Automatic Ride Control (Improved) – factory option To further enhance driving comfort at higher speed as well as with higher loads. February 2024 | AgriNews | 17
NEWS
TRANSPORT AND MACHINERY SAFETY IMPORTANCE OF MAINTENANCE
Transport and machinery are the biggest contributor to the high fatality rate the agriculture endures
T
ransport and machinery are the biggest contributor to the high fatality rate that agriculture endures. Here are some simple ways you can reduce the risk and keep you, and others, safe.
Daily and regular checks By completing daily checks before commencing use of the machine or vehicle, you are more likely to notice any possible defects that could prevent the task being carried out safely.
One of the easiest ways of keeping yourself safe is by ensuring all the equipment you require is properly maintained and therefore suitable for the intended tasks. This can apply to any piece of equipment you run, for instance tractors, trailers, ATVs, towed appliances, farm vehicles, handheld machines etc.
In addition to this, regular maintenance checks completed by a dealership are also recommended to ensure any defects that are not highlighted on daily checks are addressed. This can ensure that small issues are repaired before they escalate and have a bigger financial and safety impact.
Maintenance. Why you should care. Ensuring your machines and transport are well maintained will also ensure it is running efficiently and therefore likely to reduce long term costs associated with the machine, while also having the potential to increase its longevity. A well-maintained vehicle or machine is more likely to be complaint with what is considered roadworthy. As such, if an incident should occur (that is not your fault), you are likely to be in a more favourable position if your vehicle or machine is well maintained.
Tel: 01455 891929 Fax: 01455 891974
Sapcote Road Industrial Estate l Burbage l Hinckley l Leicestershire l LE10 2AU Multi Industrial Doors Ltd is a www.multiindustrialdoors.co.uk family owned multidoors@hotmail.co.uk company foundedTel: 01455 891929 • Fax: 01455 891974 Galvanised Roller Shutters Steel Fire Exit Doors back in 1985. www.multiindustrialdoors.co.uk Fast Acting High Speed Plastisol Colour Coated We pride ourselves multidoors@hotmail.co.uk Doors Shutters on providing a top Leveler/ Insulated Shutters • SteelDock • Galvanised RollerRoller Shutters Fire Exit Doors Loading quality service Bay Installations • Plastisol Colour Coated Roller • Fast Acting High Speed Doors Sectional Overhead at an affordable Shutters Strip Curtains doors • DockPVC Leveler/Loading Bay price. • Insulated Roller Shutters Installations and many more
Sapcote Road Industrial Estate • Burbage • Hinckley • Leicestershire • LE10 2AU l
l
l
l
l
l
l
l
l
INDUSTRIAL DOOR Specialists 18 | AgriNews | February 2024
• Steel 10 Point Locking Security/Personnel Doors
• and many more products
Nationwide Service
04R43B
Specialist Manufacturers of Industrial & Domestic Doors
l Steel 10 Point Locking/ • PVCproducts Strip Curtains Security Personnel Doors
• Sectional Overhead Doors
NEWS
BE CLEAR OF CROP PROTECTION RULES TO AVOID FALLING FOUL
Be clear of crop protection rules to avoid falling foul of the transition from winter to spring
W
ith arable growers in the UK rushing to make up for lost drilling time, it’s easy to forget that 31st January marks the last official day of the winter drilling window. As such, any crops drilled beyond this date will be defined by the CRD (the Health and Safety Executive’s Chemical Regulations Division) as spring-sown and must comply with the relevant crop protection regulations. “Any crops sown on or after 1st February in the year of harvest are considered spring crops, irrespective of the variety being drilled,” explains Jonny Oosthuizen, Herbicides Product Manager for ADAMA UK. “Unfortunately, because of the wet winter, a lot of growers throughout the UK still have winter wheat seed in the shed and, now that conditions have finally started to improve, are rushing to get as much of this into the ground as quickly as possible.
products labelled as being approved for spring-sown crops.” This changing of the seasons narrows the crop protection options available to control fresh flushes of weeds. “Some herbicides aren’t permitted for use on spring wheat, even if the actives themselves may be used via other products,” Jonny says. “That might come as a surprise to some growers, especially those who haven’t traditionally grown spring wheat before. Understanding the rules is therefore essential to ensure herbicide programmes don’t fall foul of the transition from winter to spring cropping. “Fortunately, there are still plenty of options available to ensure spring-sown cereals remain protected and ahead of the curve in terms of weed competition,” Jonny adds.
“For example, product’s such as HURRICANE (500 g/L diflufenican) and TOWER (250 g/L chlortoluron + 40 g/L diflufenican + 300 g/L pendimethalin) are approved for use on spring wheat and barley and have been proven to offer value for money as a reliable means of controlling some key grass and broad-leaved weeds. Likewise, ANTHEM (400g/L pendimethalin) is also approved for use on spring barley, although it is no longer approved for use on wheat drilled from 1st February onwards.” If in doubt about which products can and can’t be used on or after 1st February, check each product label carefully to ensure it is approved for use on spring crops. Alternatively, seek professional advice from a qualified agronomist or visit www.adama.com/en for more information.
“What many might not be aware of as we move into February is that any crop protection products registered only for use on winter wheat can’t be used on crops sown after 31st January, even if the seed is technically a winter variety. Instead, these crops can only be treated with February 2024 | AgriNews | 19
IAN FORMAN - NSTS MANAGER
S
preader testing as important as having a sprayer tested. With nitrogen fertiliser currently costing around £360/ tonne, a 3 tonne spreader is carrying just over £1,000 of product each time it leaves the yard. At a rate of 200kg/ha a spreader with a coefficient of variation (CV) of 20% could be costing you around £240 in lost revenue due to uneven application. The NSTS test aims to achieve a CV of below 10% when a spreader is tray tested and an important factor is being able to SPRAYERS achieve this by testing the
20 | AgriNews | February 2024
product first. Litre weight, hardness and size range of granules are checked against manufacturers recommended settings and the machine set accordingly. Settings options in spreader apps are a very good guide but variability of product from when it was first tested can mean a small tweak to the suggested settings is needed. The kit required to do the product tests is relatively cheap and can be purchased separately however some spreader manufacturers do supply the kits with new machines.
tramlines) are laid out across the full width of spread and the results entered into an app to calculate CV. Adjustments can then be made if necessary but often because the product has been tested and the machine inspected, the target of below 10% can already be achieved.
When the tray test is carried out, 47 trays (for 24 metre
www.nsts.org.uk
Test Centres across the UK allow easy access to getting your spreader, or any pesticide application equipment, tested. For more information go to the NSTS website
February 2024 | AgriNews | 21
BOUMATIC INTRODUCES XPRESSWAY 3.0, A PARALELL MILKING SYSTEM. BouMatic introduces XpressWay 3.0, a parallel milking system with a rotating rapid exit system ensuring higher cow and milker comfort
B
ouMatic introduces XpressWay 3.0, a parallel milking systemwith a rotating rapid exit system ensuring higher cow and milker comfort.
electrical motor, a hallmark of the company'slegacy for over 30 years. This forward-thinking approach underscores BouMatic's unwavering dedication to
BouMatic proudly unveils it’s latest marvel: the Xpressway 3.0 rapid exit parallel stall. This innovative system incorporates a rotating reel concept, delivering the fastest and most efficient exit for animals on the market. The primary aim? To enhance comfort for both milkers and cows alike. The XpressWay is a parallel milking system equipped with a rotary reel rapid exit system. This remarkable technology boasts a pneumatical system with a hydraulic brake, setting it apart from conventional market offerings by eliminating electromagnetic fields thus ensuring a comfortable environment for the cows. In line with BouMatic's longstanding commitment to sustainability and innovation,the XpressWay distinguishes itself by its reliance on anon22 | AgriNews | February 2024
environmentally responsible practices. Enhanced Animal Comfort In a bid to prioritize the well-being of the cows, the XpressWay 3.0 has been meticulouslydesigned with widened spaces, increasing from 71 cm to 74 cm. This modification allows for more freedom of movement and expedites cow traffic. Moreover, the gates are now devoid of springs, reducing maintenance requirements and streamlining operations. Elevated milker comfort By leveraging an optimized design and refining the
upper cabinet from the acclaimed SmartWay 90 parlour stall system, the XpressWay 3.0 guarantees superior visibility and optimal access to the udder for milkers. This ergonomic configuration empowers operators to position themselves in close proximity to the cow, ensuring comfort and efficiency in their tasks. The XpressWay stands as a testament to BouMatic's relentless pursuit of excellence indairy farming technology. Its unique combination of precision engineering, elimination of electromagnetic fields, and eco-friendly design positions it as an unparalleled offering in the market. With the XpressWay, BouMatic reaffirms its status as an industry leader, poised to revolutionize milking practices and enhance the welfare of both dairy farmers and their herds. Availability The Xpressway milking system is available on the market immediately through the European BouMatic dealer network.
BOUMATIC LAUNCHES MAGSTREAM MILKMETER: THE FIRST WIRELESS
BouMatic launches MagStream milkmeter: the first wireless, ICAR approved free-flow milkmeter
B
ouMatic, a global leader in the manufacturing of milking equipment, is proud to announce the release of the MagStream Milkmeter, a milkmeter that ensures a continuous and completely free milk and air flow. This meter has the lowest occurrence of vacuum drops and fluctuations of any meter of the market today. Thanks to advanced technologies used for power management, data communication and recording, it is the first milk
meter that is completely wireless. Key Features of the MagStream Milkmeter: • Easy Installation & Service: The MagStream Milkmeter's wireless design ensures easy installation and service. It is plug-and-play, quickly calibrated (statistically) and can be fully integrated with your milking installation, farm automation systems and herd management software programs.
100% free-flow design, the MagStream Milkmeter guarantees a stable vacuum and a very low vacuum drop throughout the milking process, providing optimal comfort for the animals and resulting in consistently efficient milking sessions. • ICAR Approved: The MagStream Milkmeter is ICAR approved, ensuring top performance when it comes to accuracy, hygiene and more.
• Animal Friendly: With its February 2024 | AgriNews | 23
BOUMATIC GROUP INTRODUCES THE NEXT GENERATION OF GEMINI MILKING ROBOT BouMatic: Introducing the Gemini UP, a distinctive solution for any herd size
B
ouMatic Group (consisting of the brands BouMatic, SAC andHokofarm) introduces the next generation of Gemini, the milking robot. The firstgeneration robot was launched in 2011. Over the years the model has been optimized with new benefits to take it to the next level. Therefore, the new milking robot will be launched with the name of Gemini UP to help reinforce the new level of performance that can be achieved for milk production. The Gemini UP has been developed with the focus on the best milking practices, cow comfort and lowering energy consumption. On top of the unrivaled, well known Gemini robot features, such as the unique rear attachment approach and the unobstructed open view, the upgrade contains a vast list of new cutting-edge features. Optimized milk path, according to BouMatic Group milking philosophy One of the major upgrades, at the heart of the milking robot,is the optimized milk 24 | AgriNews | February 2024
path, resulting in simply better milking. The milk flows now per quarter, without any restrictions, into the milk receiver. The new quarter milk line has an internal diameter of 19mm, which is
unprecedent in the market.
BouMatic and SAC flows are milked optimally in the Gemini UP. This proves that our robotic system follows the same tried-and-true method as conventional milking. Improved energy consumption in a
modular system.
Furthermore, the Gemini UP features This leads to maximum an improved energy vacuum stability and a consumption. This is mainly continuous milk flow without due to the new mechanical any blockages. Even cows circulation cleaning, which with the highest milk consumes less water at a Gemini UP – Double box, lower temperature. The available from BouMatic and washing unit is placed in SAC Gemini UP – Single the external technical room box, available from and is centralized regardless
BOUMATIC GROUP INTRODUCES THE NEXT GENERATION OF GEMINI MILKING ROBOT BouMatic: Introducing the Gemini UP, a distinctive solution for any herd size of the number of robots in a dairy farm. So, in case a farm has numerous robots, one washing unit manages all cleaning cycles. The same counts for the vacuum system and buffer tank. These are now centralized into one unit. More Geminis can be attached to these central units. This means that the system is modular and adaptable to all kinds of configurations, from small family farms to big commercial farms. Cutting edge vision system Gemini UP attaches cows fast and accurately thanks to machine learning technology implementation. This breakthrough technology now looks at udder imagery gathered from a wide range of cows and has allowed attachment and ultimately the throughput to rise-up to the next level for your dairy. The vision system helps to continuously adjust knowledge about different,
individual cow features such as udder and teat shapes and colors leading into a quicker and more reliable milking. BouMatic
herewith introduces AI into the milking industry. Full robotics solutions for all farm types “Continuing development and innovation is what BouMatic Group represents. We are always working on the optimization of our systems, taking the feedback from our customers and dealers into account. This new milking robot is thoroughly tested, and we believe it offers excellent performance and cow comfort, “says Uwe Osthues, Chief Commercial Officer at BouMatic.
“The new features are too numerous to sum up,” completes Rik Schoenmaker, Sales Director at SAC. “But one of the most important advantages is that we can now offer a full robotic solution to all types of dairy farmers, from small farms with less then 240 cows up to big commercial farms with 2000 cows. Mainly thanks to the abovementioned centralized systems and the recently added Gemini MAX, Herd milking system. In this system a group of cows are guided at fixed times to the robotic parlour”. Availability The Gemini UP milking robot is available on the market immediately through the worldwide BouMatic and SAC dealer network. About BouMatic Group BouMatic Group is a global leader in the design, manufacture and supply of the highest quality milking systems and dairy farm equipment.
February 2024 | AgriNews | 25
GEMINI UP SINGLE BOX. ONE UNIT, SORT CAPABLE. UNIQUE IN SIMPLICITY The Gemini UP single box milking robot is a 2-in-1 self-contained unit and, as a result, is quick and easy to install. UNIQUE IN EFFICIENCY It has an efficient, small footprint, one integrated machine room and unique in-box selection options. It therefore offers an unrivalled automatic milking solution for every farm type. UNIQUE IN SELECTION Cow flow is smooth and easy with the Gemini Up Single Box. The integrated selection process means there is no need for extra fencing and gates.
26 | AgriNews | February 2024 REACH YOUR PERFOMANCE GOALS WITH OUR EXCLUSIVE DESIGN !
David Johnson (Lutt) Ltd, Upper Bruntingthorpe Ind. Est. Lutterworth, LE17 5QZ | t: 01162 478349 Davison & Axup Dairy Supplies, Swiss Cottage, Market Rasen, LN8 5QZ | t: 01673 858567 ElectroMech Agri Ltd, 7 Tulnagall Road, Co, Tyrone, BT70 3LR | t: 02887 767376 Milkflo Dairy Systems Ltd, Trengove Farm, Cornwall, TR16 4PS | t: 08450 944815 | www.milkflouk.com Wessex Farm Installations Ltd, The Old Cobblers, Langport, TA10 9DJ | t: 07714 846987
February 2024 | AgriNews | 27
COMMENT: WE ARE GREATER THAN THE SUM OF OUR PARTS
Vaccinating UK poultry flocks for avian influenza has been described as ‘cost prohibitive’
B
y Gary Ford, chief executive, British Egg Industry Council
I am very proud and pleased to be writing my first article for Poultry Business magazine in my new role as CEO of the BEIC after serving as Deputy from mid-August 2023. At the BEIC Council meeting held at the BEIC offices, London on 6 December, Andrew Joret retired from his long-standing role as BEIC Chairman, after 23 years as CEO, Mark Williams stepped into the Chairman role and I took on the CEO role. The four months in the Deputy role has given me the opportunity to get out and about and to engage with many stakeholders. This engagement – which has been very informative – will continue over the coming weeks and months and, in reality, will be an important and ongoing part of my role as I build on Mark and Andrew’s solid foundation. Engagement was a key part of my role at the NFU when I was Chief Poultry Adviser and is equally important to me in my new role. Collaboration is also a key part of the role. I firmly believe that we, industry representative groups, can achieve more working together than the sum of our parts. It is too 28 | AgriNews | February 2024
easy to work in silos, whilst doing a good job, but working together can amplify and enhance our effectiveness be that in policy work, for example, government polices around disease control or animal welfare, or in building a more resilient sector that is able to better face into current challenges or those challenges that have gone quiet or have simply not yet materialised. I am pleased that there have already been several examples of collaboration recently – the joint BEIC/BFREPA letter regarding the new laying hen welfare standards published by the RSPCA in midNovember and the BEIC/NFU Cymru/BFREPA letter to the Welsh Assembly calling for the 16 week housing consultation for free range layers to be published. Looking forward, we are also collaborating with BFREPA and the NFU regarding a Lion producer roadshow series of meetings to be held in February and March. The programme will involve around ten meetings spread throughout England, Wales, Scotland and Northern Ireland. The meetings will be held in the early evening and will be an opportunity to further outline Version 8 of the Lion Code as well as an update on Avian Influenza. The AI element of the meetings will include hearing from a
producer that has first-hand experience of going through AI as an Infected Premise (IP), sharing their lessons learnt. It should not be forgotten that version 8 of the Lion Code of Practice simply consolidated and amalgamated the various amendments that had been made to version 7, as well as pulling together the bird welfare elements into their own sections. In fact, there are few new standards and those are there to protect both site operators as well as the Lion scheme. It is now over four months since version 8 of the Lion Code came into force on 1 September and the roadshows will be an opportunity to give feedback on what the Lion auditors, NSF, are seeing on-farm. If you can make the Lion producer meetings, please come along as this is a two-way process – I firmly believe that working together we will continue to strengthen the Lion which is important as we all benefit from a strong Lion. 77% of consumers that we surveyed in June 2023 commented that the Lion brand stands for a guarantee of quality. This is something that we need to continue to work hard to retain – and build on – and, as part of this, it is important that all Lion registered sites are audit ready all of the time, 24/7, 365 days of the year.
POULTRY FARMER FINED £28,000 AFTER BREACHING BIRD FLU HOUSING ORDER
A poultry farmer from East Yorkshire has been fined £28,000 after pleading guilty to four offences relating to an avian influenza outbreak
A
poultry farmer from East Yorkshire has been fined £28,000 after pleading guilty to four offences relating to an avian influenza outbreak on his premises and to operating a slaughterhouse without Food Standards Agency (FSA) approval.
at East Riding of Yorkshire Council found slaughtering and meat production activities had expanded such that they were in excess of the permitted limit, above which approval and on-site supervision by the FSA is required.
Daniel Mathison, 49, a partner in Mathison (Farmers) Leven, which owns the brand Yorkshire Ducks and Geese, appeared at Beverley Magistrates Court on Wednesday, 31 January, in relation to animal health and food safety offences.
There had also been a breach of restrictions preventing the movement of anything onto or from the premises whilst waiting for AI test results, as the business had continued to supply meat to a local restaurant on 13 April, 2023. A further breach of the ongoing restrictions imposed to minimise the risk of disease spreading from the farm occurred on 31 May, 2023, when old insulation was removed from the premises.
Mathison was fined £4,000 per offence, and ordered to pay an additional £6,000 towards costs and a £2,000 victim surcharge, totalling £28,000 to be paid within 12 months. The court heard how, despite compulsory housing, biosecurity and record keeping measures being in place, officers from the Animal and Plant Health Agency (APHA) found the end of a duck shed was fully open, and no records of bird deaths had been kept when they visited the farm on 12 April, 2023, to investigate a possible AI outbreak. AI was confirmed in the flock on 13 April, 2023. Follow-up investigations by officers from Public Protection
would not have happened if compulsory housing measures to ensure separation from wild birds had been complied with. It is fortunate the outbreak did not spread further when the disease control restrictions were breached. “In addition to the catastrophic consequences for this business, the measures required to control the outbreak and prevent it spreading further significantly impacted on other local livestock keepers and the community. The outbreak also resulted in substantial financial and resource costs for Defra, APHA, the council and other partner agencies involved.”
Aled Edwards, Head of Field Delivery England, Animal and Plant Health Agency. added: During sentencing, the “This case demonstrates how magistrates said these actions our robust enforcement and could have had wide reaching our effective collaboration and serious consequences for with local authorities can other farmers and the local bring those guilty of breaches community. They considered of animal health and welfare this to be in the high culpability legislation to justice. bracket, as Mathison carried on despite warnings and “I hope the sentence will should have known what was act as a reminder to others required. of the importance of these legal requirements in Angela Dearing, director of minimising the risk of further housing, transportation and spread of disease, and the public protection at East consequences of not adhering Riding of Yorkshire Council, to the rules. said: “It is highly likely this avian influenza outbreak February 2024 | AgriNews | 29
STEVE BIRCHALL: KEEPING IT IN THE FAMILY
BouMatic: Introducing the Gemini UP, a distinctive solution for any herd size
B
eing a small family run Poultry unit we need to have good reliable contractors to ensure our site has a good state of cleanliness and biosecurity.In order to achieve this we use another family run business, Steve Birchall Poultry Services Ltd.
As a business we have worked in relationship with Steve Birchall and his team for a long number of years and will continue to do so for many more. His team do a first class job washing and disinfecting our site. Nothing is too much trouble and they can accomodate our needs at the drop of a hat. I can honestly say Steve and his team are excellent, reliable, thorough, tidy and hard working. They leave our site ready for action! I would recommend Steve Birchall Poultry Services without hesitation. P.R Starkie Farm Manager P.M Ashburner Ltd
Testimonial from W. Bateman & Co I would highly recommend Steve Birchall Poultry Cleaning Services, having knowing him for over 25 years and it has been an absolute pleasure to have him as my loyal customer and I look forward to many more years in business and wish Steve Birchall the continued success with his business and the good reputation he has gained over the years. We look forward to many more years in business with Steve Birchall. All the best - All at W Bateman & Co
30 | AgriNews | February 2024
CHIEF EXECUTIVE FOR NEW AGRI-TECH CENTRES ANNOUNCED
The Animal Welfare Commitee of the Welsh government has published a report outlining alternatives to culling newly hatched chicks
Phil Bicknell has been appointed chief executive of the newly merged Agri-Tech Centres and will take up his post in the spring. Last year, Agri-EPI, CHAP and CIEL – formally announced their intention to merge in April 2024 to form an integrated business. Dr Peter Quinn, chair of the transition board responsible for the merger and the future Agri-Tech Centres, said: “I am delighted to announce that Phil Bicknell will be the chief executive for the new Agri-Tech Centres business from 1 April. We conducted a comprehensive recruitment process, internally and externally, to identify the best candidate to lead the business. Phil clearly demonstrated his vision for
the future, along with the experience, skills and energy he will bring to the role. “This appointment represents an important step in our process, as we move into the final weeks before the merger. There remains a lot to do, in collaboration with our partners, but our talented teams are looking forward to the opportunity to make a real impact in the future through innovative agri-tech.” Phil Bicknell said: “The transition to a single agri-tech business is a pivotal move to accelerate innovation for our sector and I feel privileged to have been asked to lead the organisation. “This is such an exciting opportunity and, working
with an excellent group of colleagues and sector partners, I can’t wait to get started.” Bicknell joined CIEL in 2021 and was made director in June 2023, at which time he joined the transition board for the merger. Prior to CIEL Phil has had a varied career across food and farming. He led the 50 strong market intelligence team at the Agricultural and Horticultural Development Board (AHDB). He was chief economist at the National Farmers Union (NFU), spearheading the evidence to support a range of lobbying activity. Other roles include specialising in agri-trade issues at the US Department of Agriculture and advising a range of agribusiness clients with Bidwells. February 2024 | AgriNews | 31
32 | AgriNews | February 2024
AGRI NEWS CLASSIFIED LISTINGS David Taylor (Garages) Ltd
Bob Gerard Ltd
22 London Road, Great Glen, Leicester, LE8 9GF t: 01162592224 www.bobgerard.co.uk
CM Barber Plant Hire
David Taylor Garages
The Depot, Steam Mills, Cinderford, GL14 3JD t: 07774 249580 www.cmbarberplanthire.co.uk
Granada Park Motors, Crickhowell, NP8 1HW t: 01873 564016 | www.davidtaylorgarages-isuzu.co.uk
Mikes Graphics
Southam Agri
DJ Leigh Machinery DJ Leigh
Near Daventry, Northants, NN11 6DP t: 07502 661861
5 Wall St, Hereford, HR4 9HP t: 07855 985649 www.mikesgraphics.co.uk
Fields Farm, Station Rd, Southam, CV47 2DH t: 01926 813426 www.southamagri.co.uk
Wharfedale Tractors Steve Birchall
Chorley, Lancashire, PR6 3TQ t: 07850 838172 roosterman1@btinternet.com
W Bateman & Co
Garstang Rd, Barton Nr Preston, PR3 5AA t: 01772 862948 www.bateman-sellarc.co.uk
Wharfedale Tractors Unit 1 Riffa Bus. Park Harrogate Rd, Otley, LS21 2XB t: 01132 841117
Advertise your company here, please contact us to discuss your requirements:
vicky@agrinewsmedia.co.uk
February 2024 | AgriNews | 33
34 | AgriNews | February 2024
BOSS ORV HAVE BEEN APPOINTED SOLE UK DISTRIBUTORS FOR POWERLAND AGRO Boss ORV appointed distributors for Powerland Agro Off-road vehicle specialists
B
OSS ORV appointed distributors for Powerland Off-road vehicle specialists BOSS ORV have been appointed sole UK distributors for Powerland Agro Tractor Vehicles Pvt. Limited. Powerland is the company behind the development and manufacturer of the Tachyon fully electric ATV in Goa, India. BOSS ORV Managing Director, Phil Everett, made the announcement. “I have known Tej Naik and his family for many years,” he says, “and we have been in constant communication over this time. We have watched with great excitement how the business and products have developed. The factory in Goa has become a fully independent facility, manufacturing the complete vehicles in-house, including their own chassis. We took the opportunity to visit
their stand at the EICMA event in Milan and seal the deal with a long-term distribution contract. The Tachyon is now the complete fully electric (Li-ion) ATV, which Is road legal with tractor homologation and the time is right to launch it into our market.”
business for more than 25 years, will definitely help us in scaling up the business and making better products to satisfy the requirements of customers in the off-road market.”
Powerland expects to increase its team size to five hundred employees The Naik family had, for in the next three years. a long time, harboured Phil Everett says he will the ambition to produce be sharing more product their own automotive details over the coming vehicles and decided to weeks and suffice to say, manufacture ATVs locally BOSS ORV are looking to cut down on costs and forward to developing the make the product Powerland brand and affordable for Indian business in the UK. The customers. Today, the Tachyon will be exhibited company is rapidly for the first time in the UK growing at the Lamma Show 2024 with the production of the on stand number 6.924. Tachyon, which is now being exported as far For more information away as South America about the Powerland and the USA. Tachyon you can call BOSS ORV on 01785 Tej Naik says, “we’re 561046 excited to have Phil E-mail: sales@bossorv. Everett and BOSS ORV co.uk Web: www.bossorv. as our exclusive partner co.uk for the UK. Phil, with his expertise in the ATV/UTV February 2024 | AgriNews | 35
36 | AgriNews | February 2024
DG Buscombe, Saint Columb, TR9 6DE t: 01637 880119 | www.dgbuscombe.co.uk Marrs of Methlick, Schoolbrae Garage, Methlick, Ellon, AB41 7DS t: 01651 806910 | www.marrsofmethlick.com Smithfield Tractors, Llanelwedd, Builth Wells, Powys, Ls2 3SR t: 01982 553221 | www.smithfieldtractors.co.uk Trebor Jones & Son Ltd, Llanfyllin, SY22 5LE t: 01691 648411 Wharfedale Tractors, Unit 1 Riffa Bus. Park, Harrogate Rd, Otley, LS21 2XB t: 01132 841117
February 2024 | AgriNews | 37
Get 10% off a new Suzuki KingQuad when you trade in your old ATV. Any make or model accepted. Visit atv.suzuki.co.uk to find your local Suzuki dealer.
T&C’s applyOffer offerends ends 31st March 2023. 2024 T&Cs apply. 31st December DH Wadsworth & Sons Flockton t: 01924 840319 DH Wadsworth & Sons Malton t: 01653 692244 | www.wadsworthquads.co.uk
38 | AgriNews | February 2024
Get 10% off a new Suzuki KingQuad when you trade in your old ATV. Any make or model accepted. Visit atv.suzuki.co.uk to find your local Suzuki dealer.
T&C’s applyOffer offerends ends 31st March 2023. 2024 T&Cs apply. 31st December E.T James & Sons, East St, Powys, LD6 5DS t: 01597 810396 | www.etjames-son.co.uk Hunts Engineering Ltd, Shipston on Stour, CV36 4HT t: 01608 638407 | www.huntsengineering.co.uk
February 2024 | AgriNews | 39
PLAY DIFFERENT TGB Blade 520SL
* 5 Year Manufacturer Limited Warranty * The Blade series has been sold worldwide now for over 20 years. The 520SL is the latest edition to the agricultural lineup. A combination of elements developed over a decade of hard work within the agricultural industry, the 520SL boasts a long list of key features. This workhorse ATV is ideal for any agricultural situation. Powered by the tried and tested TGB 503cc high torque engine, but now equipped with Electronic fuel injection.The Blade 520SL is T3 homologated so can be registered for road use.
A1 Tractor Parts, West View, Cumbria, CA7 3NL | t: 07873 737538 Fairoak Machinery, www.a1tractorparts.co.uk Yew TreeCMS Garden Centre, Common, Ball Hill, Berkshire, Exeter, VennyHatt Bridge, Exeter, EX4 8JJ | t: Newbury, 01392 467700 RG20 0NG www.keewaymotorcycles.com Fairoak Machinery, Hatt Common, RG20 0NG | t: 01635 254533 t: 01635 Berks, 254533 www.fairoakmachinery.com www.fairoakmachinery.co.uk H & H Vehicle Services, Unit J2, Holmfirth, HD9 4DS | t: 01484 859322 www.hhvehicleservices.co.uk R.O Davies, NG Quads & Moto (Covering Devon & Cornwall), 2 New Road, Brixham, TQ5 8Lz Garthmyl, Llangernyw, Abergele, LL22 8RG t: 01803 883555 | www.ngmoto.com t: Rhys -Southampton, 07879 016798 New Forest Garden Machinery, SO40 3ND | t: 02380 871764 www.nfgmltd.co.uk www.rodavies.co.uk Taylors Tools LTD, Primrose Hill, Herts, WD4 8HX | t: 01923 260699 www.taylorstools.co.uk 40 | AgriNews | February 2024
BUILT STRONG TO WORK HARD
The MULE PRO-DX offers a class-leading 453kg capacity low tipping cargo bed and 907kg towing potential.
Contact a member of the team for more information.
High torque diesel power moves cargo and crew quickly with the safety assurance of the Roll-Over Protection Systems (ROPS).
THE CHOICE OF PROFESSIONALS
D. H. Wadsworth & Sons Flockton Tel: 01924 840319 D. H. Wadsworth & Sons Malton Tel: 01653 692244
WWW.WADSWORTHQUADS.CO.UK
FOR MORE INFORMATION, CONTACT YOUR LOCAL DEALER: DAY & COLES AGRICULTURAL Wellingborough, NN8 6UW Tel 01933 673900 www.dayandcoles.co.uk JIM PRICE MACHINERY LTD Craven Arms SY7 9QG Tel 01588 673 746 www.jimpricemachinery.com
MARTIN PEARS ENGINEERING LTD Totnes TQ9 7JE Tel 01548 521 429 www.mpearsengineering.co.uk
➢ Powerful 993cc Diesel engine ➢ 2WD or 4WD modes ➢ Largest cargo bed in class
➢ Gas-assisted tilting cargo bed ➢ Stable, wide-body chassis ➢ 907kg towing capacity
SOUTHAM AGRI SERVICES Southam CV47 2DH Tel 01926 813 425 www.southamagri.co.uk
February 2024 | AgriNews | 41
DJ LEIGH USED BOMFORD HEDGE CUTTER B578 3PL MTD, 1.30 CUTTING HEAD £4,500 + VAT DAVID BROWN 1490, 2WD 1983 A REG C/W ECON HEDGEMASTER NEEDS TLC £4,775 + VAT TIPPING TRAILER 3-4 TONS £950.00 + VAT BARTON MUCK FORK, GOOD CONDITION, £350.00 + VAT WALK BEHIND ROLLER, £675.00 +VAT McCONNEL FLAIL HEAD, £325.00 + VAT DAVID BROWN 1490 1983, 2WD TRACTOR NEEDS TLC £POA TEAGLE TOMAHAWK STRAW CHOPPER 2008, (SPARES) 3 POINT LINKAGE, GOOD CONDITION £POA TEAGLE 510 PASTURE TOPPER IN GOOD WORKING ORDER £1250.00 +VAT 1982 DAVUD BRIWN 1490 2WD TRACTOR THREE POINT LINKER ON 14 X 34 REAR 7.50-16 FRONT, NEEDS TLC £3,375 ++ VAT 1968BDAVID BROWN 990 FRONT LOADER BUCKET ROLL BAR £2,535.00 + VAT 1999 T REG LDV HORSEBOX LORRY £3,500 COMPLETE, OR JUST BOX OFF £1,750 + VAT – HAS NO TEST KUBOTA KH51 MINI DIGGER ON STEEL TRACKS OFFERS AROUND £3,275.00 + VAT BARTON MUCK FORK V.G.C. TRIP MODEL £275.00 + VAT 3 TON TIPPER TRAILER (NEEDS REBUILD) £525.00 MF 50B DITCHING BUCKET £325.00 + VAT MF FRONT WEIGHTS £325.00 + VAT GEAR BOX & PUMP TO FIT ECON UNDER TANK £475.00 + VAT IH FRONT WEIGHTS FOUR ONLY £225.00 VAT SNOW PLOUGHS GRAY FRONT OR BACK £535.00 + VAT SNOW PLOUGH BOUNCE FRONT ONLY £875.00 + VAT LINER SAW BENCH WITH ENGINE ON SMALL WHEELS £135.00 + VAT DOWDESWELL DP7 4 FUR REV PLOUGH £1,100.00 + VAT DOWDESWELL DP7D 4 FUR PLOUGH £1,950 + VAT PARMITER POST RAMMER £1,325.00 + VAT MF CHISEL PLOUGH 8FT WIDE 3 TINES £765.00 + VAT BOMFORD CHISEL PLOUGH 8FT WIDE 9 TINES £790.00 + VAT BAMFORD 4 FUR PLOUGH DISC £425.00 + VAT IFOR WILLIAMS 2 TON TRAILER WITH SIDES £1,750.00 + VAT 1988 KRAMER 312SE LOADING SHOVEL £4,450.00 + VAT BOBCAT 313 SKID STEER LOADER NEEDS TLC £POA McCONNEL HEDGE TRIMMER 1.2M £655.00 + VAT LELY 3.5 TO 4M POWER HARROW FROM £895.00 TO £1,750.00 + VAT 42 | AgriNews | February 2024
D MACHINERY MF 30 DRILL PIPES SHORT AND LONG £POA WELD ON POINTS FOR LELY POWER HARROW, TOTAL 72 £POA PUMPS TO FIT ECON HM1 & HM2 ECON HEADS £POA LOWER LINKAGE HOOK TO FIT MF 2640/2680/2720 £POA PLOUGH PART FOR DOWDESWELL AND RANSOMES £POA MUIR HILL 4000 2WD LOADING SHOVEL SPARES OR REPAIRS £625.00 + VAT SANDERSON 50 2WD FORKLIFT NEEDS ENGINE REBUILD £1,550 + VAT SHELBOURNE REYNOLDS RAPE MACHINE TYPE 302/302-13 SPARE OR REPAIR £1,475.00 + VAT DUAL STOCKS AND BETTERSON 18.4X38 £POA ECON HM1 & HM2 HEDGE TRIMMER GOT BRACKET £1.050 TO £1,650 + VAT ECON HM1 BOOM WITH RAMS £465.00 + VAT MF DRAW BAR TO FIT 135 TO 165 TRACTOR £175.00 + VAT WHEELS AND TYRES FROM 14,0-16 10 PLY £325.00 + VAT RIMS AND TYRES TO FIT MF OR FORD ETC., SIZE 12.5/80=18 10 PLY £325.00 + VAT THE PAIR PLUS 11.00 = 16 10 PLY MUCK FORK WITH GRAB TO FIT 4FT BOBCAT £425.00 + VAT BOMFORD MODEL 90, 18461, 1957 K99 HEDGE TRIMMER 3 POINT LINKAGE CABLE CONTROL 1.3M HEAD £4,250 + VAT SPEARHEAD MK6 HEDGE TRIMMER £POA BOMFORD HYDRO MOWER HEDGE CUTTER £625.00 + VAT FERGUSON CULTIVATOR FOR GREY FERG £195.00 + VAT FERGUSON EARTH SCOOP ON THREE POINT LINK £325.00 + VAT NUFFIELD OR LEYLAND SMALL WHEELS FOR FRONT £135.00 + VAT TANCO BALE GRAB UP AND OVER MODEL £545.00 + VAT PERKINS DIESEL 4CLD ENGINE TO FIT LANDROVER ETC., £345.00 + VAT POWER PACK TO RUN WRAPPER ETC., NEEDS TLC £425.00 + VAT DOWDESWELL SKIMS TO FIT DP1 PLOUGH £210.00 = VAT NEXEN ROADIAN AT P245/70 R17 TO FIT TOYOTA OR ISUZU ETC., 6 STUDS £425.00 + VAT TOP TO FIT TOYOTA PICK UP SINGLE CAB £135.00 + VAT
*PLEASE NOTE: ALL PRICES ARE PLUS VAT
FOR MORE INFORMATION PLEASE CALL DAVID ON 07502 661861 February 2024 | AgriNews | 43
SUBARU OUTBACK BUILT FOR ADVENTURE.
£1,500
SUBARU DEPOSIT CONTRIBUTION*
5.9%
APR REPRESENTATIVE†
3 YRS £299
SERVICING FOR **
3 YRS
ROADSIDE ASSISTANCE#
STOCK AVAILABLE FOR IMMEDIATE DELIVERY
SUBARU OUTBACK fuel economy and CO2 results (WLTP): Combined 33.0mpg, CO2 emissions 193g/km. MPG figures a real life conditions & CO2 produced depends on a number of factors including accessories fitted (post-registration), variat
Offers available until 31.12.23. Stock subject to availability. Subaru reserves the right to amend or withdraw offers at any time without prior notice. Private cust only. *£1,500 Subaru Deposit Contribution (incl. VAT) on a 2.5i Outback Limited, Field or Touring. †Credit is subject to status. Must be 18+. This credit offer is on for £299.00 (incl. VAT) offer applicable when you purchase a brand-new Subaru Forester e-BOXER, XV e-BOXER or Outback. All services should be taken at t The customer’s failure to redeem the services within the designated mileage or time will void the manufacturer’s warranty. Available to retail customer only. D and Assistance Programme is included, valid in the UK and Europe.
44 | AgriNews | February 2024
We typically receive commission or other benefits for introducing you to International Motors Finance Ltd. This may be a flat fee or percentage of the amount you borrow. Vehicle shown is a Outback 2.5i Field Lineartronic, OTR price of £41,585. Model shown price includes optional special paint finish at £595.
CALL OR VISIT TO BOOK YOUR TEST DRIVE TODAY Dales Subaru, Barnoldswick, Lancashire, BB18 6TG | t: 01282 797555 www.dales-subaru.co.uk 438 Tester
438 Tester
Perkins Garage, Braintree, CM77 6SA | t: 01376 550899 438 Tester, 438 Tester, 438 Tester 438 Tester www.perkinsgarages.co.uk
SEARCH: > Subaru
of Bacton, Stowmarket, IP14 4HP | t: 01449 781131 438 Tester, Trading asJeffries 438 Tester www.jeffriesofbacton.co.uk is a credit broker and not a lender
are official EU test figures for comparative purposes & may not reflect real driving results. Fuel consumption achieved in tions in weather, driving styles & vehicle load.
tomers only, not available in conjunction with any other offers. Excludes Personal Contract Hire and Business Contract Hire. Available at participating dealers nly available through Subaru Finance provided by International Motors Finance Limited, St William House, Tresillian Terrace, Cardiff, CF10 5BH. **3 services the relevant service intervals - either 12,000 miles or 12 months, whichever comes sooner. All services must be completed by an authorised Subaru Retailer. Does not cover any non-service related parts or repairs or general wear and tear. Servicing is transferable with the vehicle. #A comprehensive 3-Year Recovery
February 2024 | AgriNews | 45
THE NEW-LOOK ISUZU D-MAX
BUILT FOR DOERS PICK-UP OF THE YEAR
2023
That’s the multi-award-winning Isuzu D-Max. With a 3.5 tonne towing capacity, 1.1 tonne payload, trailer sway control, hill start assist and descent control, it’s the pick-up as driven to do as you are.
Bob (Garages) Gerard Ltd, Leicestershire, Ltd LE8 9GF t: 01162 592224 David Taylor www.bobgerard.co.uk
01873 810304 David www.davidtaylorgarages.co.uk Taylor Garages, Crickhowell, NP8 1HW t: 01873 810304 www.davidtaylorgarages.co.uk Granada Park Motors, Crickhowell, Powys NP8 1HW Slip End Garage, Luton, Bedfordshire, LU1 4BU: t: 01582 456888 www.slipendgarage.co.uk
All fuel consumption and emission values are based on the new WLTP (Worldwide Harmonised Lig standard Isuzu D-Max range in MPG (l/100km): Low 25.1–27.6 (10.2–11.2). Mid 31.4–36.4 (7.8–9 emissions 220–241 g/km. Visit Isuzu.co.uk or contact your local Isuzu dealership for more information.
46 | AgriNews | February 2024
THE NEW-LOOK ISUZU D-MAX. MJ Fews, Wotton-under-Edge GL12 8SR | t: 01453 844131 DRIVEN TO DO.
www.mjfews-isuzu.co.uk Westaway Motors, Northampton, NN16 8JE t: 01604 847245 www.westawaymotors.co.uk
ght Vehicle Test Procedure) test cycle which uses real-world driving data. Official fuel economy for the 9.0). High 36.0–39.4 (7.2–7.8). Extra-High 29.0–30.8 (9.2–9.7). Combined 30.7–33.6 (8.4–9.2). CO2
February 2024 | AgriNews | 47