TCT3Sixty Show Guide 2023

Welcome to the 2023 edition of TCT3Sixty!

We are delighted to welcome you to the UK’s definitive and most influential 3D printing and additive manufacturing event.

This week brings together market leading technology suppliers, brilliant service companies and the largest FREE additive manufacturing and 3D printing conference on the planet.

Almost 200 exhibitors are ready to help you make sense of the opportunity that 3D printing and additive manufacturing presents for your organisation.

Alongside them, across four stages, are almost 100 speakers that will deliver insights and intelligence from almost 1000 years combined industry experience that will ensure you have real takeaways from your time at the event.

Our mission goes beyond simply raising awareness and adoption of these exciting technologies. TCT 3Sixty is focused on developing your understanding of the real potential of additive manufacturing and 3D printing technology so you can maximise its impact within your organisation.

Whether you are evaluating the technology for the first time, ready to buy equipment or looking to optimise your use of existing machines, TCT 3Sixty will help you make the next step.

We are often asked why the programme is free at our UK event, and it is simple. We see this as the best way to drive the UK market forward. By removing the barriers to learning

and enabling access to the knowledge base we have here and overseas, we can supercharge adoption and increase the usage of these amazing technologies across all sectors of industry in the UK.

As always, I must say a big thanks to all our exhibitors, speakers, advisors, experts and sponsors who are the real stars of the event, the additive community is a special one and the willingness to share knowledge and experience is one of the defining traits of this exciting sector.

So, plan your time on the show floor wisely, there is a lot to see. I urge you to download the event App, review the programme and exhibitors, and create your own personal agenda and show experience that will help you with your specific challenges...

We look forward to welcoming the additive community to the home of additive manufacturing and 3D printing in the UK this week.

Have a great visit!

DUNCAN WOOD Chief Executive Rapid News Group

NETWORKING VIA THE APP

Making the most of your time at TCT 3Sixty just got a lot easier with our new enhanced app.

The TCT 3Sixty app brings everything happening at the show to your device allowing you to plan, connect and network before, during and after the event.

Getting Started

Download the TCT 3Sixty mobile app to your device from the App Store or Google Play.

Log in to the app using the same email address and password you used when registering for TCT 3Sixty. If you haven’t had a chance yet, visit www.tct3sixty.com and sign up now –it takes less than 5 minutes.

You will receive a confirmation with your login details, and you are all set!

Key Features

Connect with speakers, sponsors and exhibitors with direct messaging and appointment scheduling.

Build your own personal schedule with 1-2-1 appointments, your must-see exhibitors, products and services, and the full conference programme.

Find your way to exhibitor stands and feature areas with the live floorplan.

Stay up to date with real-time messaging, alerts, social feeds and news updates.

Discover new products and services relevant to you with AI-powered recommendations.

EXHIBITOR LIST A-Z

are more than a media or an event company. are catalysts for business. connect our audience with the cutting edge technology solutions our clients offer.

help them compete in the global marketplace. evolve, adapt, iterate and improve everything, every day. work hard and smart. We believe in possibility. don’t hire talent, we hire passion with talent. create a good place to work and support good causes.

Code of Conduct

As we come back together please remember that some people will be more comfortable in the live environment than others. Please consider the following during your time at the event.

GENERAL INFORMATION

EVENT LOCATION

Hall 1, National Exhibition Centre (NEC), Birmingham, B40 1NT

OPENING HOURS

Weds 7 June 2023

9.30 - 17:00

Thurs 8 June 2023

9.30 - 16:00

VISITOR WiFi

The NEC offers FREE Wi-Fi to visitors. If you are having difficulty accessing the NEC Wi-Fi, head to the Visitor and Business Centre and you will receive help.

ADMISSION FEES

There are no entry fees for visitors wishing to come to TCT3 Sixty. Entry is free for all. This applies to both the exhibition and conference sessions. The organiser reserves the right, at its discretion, to refuse admission into the hall. The organiser will issue official badges and no other form of admission will be valid.

LOST PROPERTY

The main area is located in the Security office on the Piazza by the top of the stairs near Hall 1. There is also a smaller security office in the Atrium near Hall 6. For property lost on the same day during an exhibition, visitors can go in person to the nearest Security office. Once the show is over, all property is moved to the Piazza office. You can call +44 (0) 121 767 3883 for lost property queries. The venue will retain lost property for a limited time, after which the venue shall consider the property to be abandoned and shall sell that property for its own account.

FIRST AID

The NEC has trained first aid staff available. If there is an accident or incident, please ask the nearest member of staff.

VISITOR CAR PARKING

Please see NEC website - www.thenec.co.uk

COPYRIGHT

The content of this catalogue is subject to copyright and cannot be copied or used for any purpose other than reference without the express permission of Rapid News Publications Ltd.

PUBLIC ADDRESS

The public address system is for official announcements and police messages only. It is not available to exhibitors or visitors under any circumstances.

PRESS LOUNGE

The Press Lounge will be located on Stand K39 –Hall 1. Exhibitors are invited to display press and information packs in this location. All visiting media and accredited press are welcome to visit and use this facility.

DISCLAIMER

While every attempt has been made to ensure that the information contained within this guide is accurate, the publisher accepts no responsibility for information printed in error or omitted. All rights are reserved.

EVENT MANAGEMENT

TCT 3Sixty is organised by Rapid News Publications Ltd, No 3. Office Village, Chester Business Park, Chester, CH4 9QP, UK.

UNAUTHORISED SOLICITATION, CANVASSING & PHOTOGRAPHY

Canvassing by unauthorised persons is strictly prohibited. The display or distribution of printed matter or other articles, except by exhibitors from their own stands, is prohibited. Unauthorised photography and videotaping are strictly prohibited. Any person wishing to take a photo or video must obtain permission of the exhibitor or event management.

TCT ADVISORY BOARD

The TCT Advisory Board

Our board of expert advisors help steer the content output across TCT conference, print, digital and event features, to help us reach our mission to deliver business critical intelligence, connecting the additive community.

The Advisory Board represents a broad range of expertise across industries and disciplines, to enable us to build our rich mix of live events and our allencompassing media portfolio.

CARL DEKKER President of Met-L-Flo Inc

ANDREW ALLSHORN Founder of AT 3D-Squared Ltd

CANDICE MAJEWSKI Senior Lecturer in Mechanical Engineering at The University of She eld

ALEX KINGSBURY Industry Consultant at Additive Economics

CHRIS SUTCLIFFE CEO of Meta Consultancy

ANGELA SZERLONG Global Director - AM Series at SME

DAVID BRACKETT Chief Engineer at the Manufacturing Technology Centre (MTC)

DAVID BURNS Principal and Founder of Global Business Advisory Services LLC

FILIP GEERTS Director General of CECIMO

JENNIFER JOHNS

TCT ADVISORY BOARD

JEREMY PULLIN

ROWLEY

KAT ERMANT

KRISTIAN ARNTZ

Professor for manufacturing technologies and machine tools at FH Aachen University of Applied Sciences

KRISTIN MULHERIN

Founder & President of AM-Cubed and President of Women in 3D Printing

MARK CHESTER

Product Development Specialist at PrintCity (Manchester Metropolitan University)

MELISSA ORME

Vice President at The Boeing Company

MOHSEN SEIFI

VP of Global Advanced Manufacturing Programs at ASTM International

Reader in International Business at University of Bristol

Head of Additive Manufacturing at Sartorius

JONATHAN

Industry Consultant and Educator at Advanced SLS

Lead Prototype Technician at Peloton

TCT ADVISORY BOARD

PHILL

RUARIDH MITCHINSON

Technology Manager - Additive Manufacturing at MTC

SHEKU KAMARA

Dean of Applied Research at Milwaukee School of Engineering.

TERRY WOHLERS

Head of additive manufacturing market intelligence at ASTM International

TODD GRIMM

President of T. A. Grimm & Associates

VESNA COTA

Additive Manufacturing Specialist

PAT WARNER

ADM Manager at Alpine Formula One

DICKENS Founder of Added Scientific Ltd

PHIL REEVES Managing Director of Reeves Insight Ltd

ROBIN DALLEN Freelance Additive Manufacturing Consultant

ROBERT HIGHAM Head of Centre for Advanced Manufacturing (CfAM) at University of Bolton

The World’s Best FREE 3D Printing & AM Conference

This year the conference will deliver compelling 3D printing and AM insights, across four stages. Almost 100 speakers with over 1,000 years of 3D printing & additive manufacturing experience will inspire the TCT 3Sixty audience with a world-class programme that will supercharge your knowledge and usage of the technologies.

DAY ONE - Wednesday 07 June 2023

10:00 - 10:45

3D Printing a Sustainable Future – Greenwash, Hogwash or a Justified Shift in Thinking

Phil Reeves, Managing Director, Reeves Insight Ltd

Additive Manufacturing in the Aerospace Industry

10:45 - 11:30

Vijay Jagdale, Associate Director and Discipline Lead for Additive Methods, Applied Research and Technology, Collins Aerospace

11:30 - 11:45

11:45 - 12:30

COFFEE BREAK

UK User Group Takeaways

Todd Grimm, President, T. A. Grimm & Associates

The Additive Manufacturing Transformation: How to Unlock New Manufacturing Applications at Scale

12:30 - 13:00

Thomas Krüger, Project Leader & Wilderich Heising, Partner and Associate Director, Boston Consulting Group

13:00 - 13:45

NETWORKING LUNCH

13:45 - 14:15

Developing Best Practices in Metal Additive Manufacturing: A Metallurgist Perspective

Moataz Attallah, Professor, University of Birmingham

14:15 - 14:45

14:45 - 15:00

15:00 - 15:30

Printing the Future: Insights and Predictions for the Global 3D Printing Market

Natalia Funkner, 3D Printing Analyst, CONTEXT

COFFEE BREAK

Jurassic Print: How We Use Additive Manufacturing for Conservation, Exhibition and Engagement

Tom Ranson, 3D Visualisation Specialist, Natual History Museum

10:00 - 10:45

DAY TWO - Thursday 08 June 2023

3D Printed Pinocchio

Richard Pickersgill, 3D Workshop Supervisor, Mackinnon and Saunders

Design for Additive Manufacturing at The LEGO Group

10:45 - 11:30

11:30 - 11:45

11:45 - 12:30

Anna Kathryn Chase, Design for Additive Manufacturing, Additive Design & Manufacturing, The LEGO Group

COFFEE BREAK

How is Additive Manufacturing Having an Impact on Your Business?

Carl Driver, Director, PrintCity

Strengthening the EU & UK’s Industrial Competitiveness With Additive Manufacturing

12:30 - 13:00

Stewart Lane, Chairman, CECIMO Additive Manufacturing Committee & AM-UK

13:00 - 13:45

NETWORKING LUNCH

13:45 - 14:15

Advanced 3D Modelling and Additive Manufacturing at the Point of Care

Ilja Asanovic, Senior Biomedical Engineer, Insight Surgery

How 3D Printed Implants Help Patients Enjoy Longer and Better Lives

14:15 - 14:45

Alba González-Álvarez, MarieCurie Conex+ Project on Custom Implant Development & 3DP, University Carlos III of Madrid

SUBJECT TO CHANGE.

To view the latest information please download App from Apple & Google stores

11:30 - 13:00

Sponsored by

DAY ONE - Wednesday 07 June 2023

Additive Manufacturing for Advanced Workholding

Mark Hyde, Technical Director, Hyde Engineering

Additive Manufacturing Within the Off Highway Industry

Toby Brown, Structural Engineer, JCB

Moderate Your Enthusiasm – Implementing AM Successfully

Jonathan Meyer, CEO, APWORKS

13:00 - 13:45

13:45 - 14:15

LUNCH BREAK

How to Avoid Re-Inventing the Wheel

Jason Lessard, Partner, HGF Ltd

Environmental Benefits of Additive Manufacturing - A Comparative Life Cycle Assessment

14:15 - 14:45

Sherri Monroe, Executive Director, Additive Manufacturer Green Trade Association (AMGTA)

A Holistic Approach for Remanufacturing Empowered by Directed Energy Deposition (DED)

15:00 - 15:30

Stephan Ziegler, Managing Director, ACAM Aachen Center for Additive Manufacturing

11:30 - 12:00

DAY TWO - Thursday 08 June 2023

The Industrialisation of Low Earth Orbit

Mike Curtis-Rouse, Head of Beyond Earth, Satellite Applications Catapult

12:00 - 12:30

A Versatile Approach to Interpret and Classify Powder Flowability in Laser Powder Bed Fusion Process and Powder Reuse

Ehsan Rahimi, Senior Researcher, Materials Processing Institute

12:30 - 13:00

13:00 - 13:45

Leveraging US Patents in this “Secret” Court to Exclude Infringing Importers

Aidan Skoyles, Partner, Finnegan

LUNCH BREAK

Printed Trains & Digital Warehouses: The Million Potential in Rail

13:45 - 14:15

Stefanie Brickwede, Managing Director, AM Division, Deutsche Bahn

Is Precious Metal 3D printing Viable to UK Based SME Jewellers

14:15 - 14:45

Maria Paparozzi-Shipman, KTP Associate, Diamond Centre Wales

SUBJECT TO CHANGE. To view the latest information please download App from Apple & Google stores

11:30 - 12:00

DAY ONE - Wednesday 07 June 2023

Combining Additive Manufacturing and Agile Methodologies for Rapid Robotics Innovation

Leo Herskovits, Product Manager, Ocado

Developing Parametric Sets to Deliver Flying Space Metal Additive Manufacturing Parts

12:00 - 12:30

Sebastien Eyrignoux, Additive Manufacturing Project Manager, LISI Aerospace

Design for Additive Manufacturing - What You Need to Know?

Panel Session from DFAM network:

Serena Graziosi, Associate Professor, Department of Mechanical Engineering of Politecnico di Milano;

12:30 - 13:15

Patrick Pradel, Senior Lecturer in Digital Design & Manufacturing, Loughborough University;

Jonathan Rowley, Professional Educator and SLS Consulting, Advanced SLS;

Robert Higham, Head of Centre for Advanced Manufacturing, University of Bolton

13:15 - 13:45

LUNCH BREAK

How Filtration Membranes are Leapfrogging 60 Years of Pain

13:45 - 14:15

Thanks to AM

Richard Finch, Senior Additive Manufacturing Engineer

Process and Systems Engineering as an Enabler for Innovation in Laser Powder Bed Fusion

14:15 - 14:45

Tim Lantzsch, Head of Department Laser Powder Bed Fusion, Fraunhofer Institute for Laser Technology ILT

Moving Away From Prototyping to End Use With Additive Manufacturing

Panel Session from HP:

14:45 - 15:30

Maryam Qureshi, 3DP Applications Engineer, HP 3D Printing; Doug Young, Clinical Support 3D Printing, Crispin Orthotics; Becky Eskandari, AM Business Development Manager, Paragon Rapid Technologies

Sponsored by

Sponsored by

11:30 - 12:00

DAY TWO - Thursday 08 June 2023

Digital Twins in Additive Manufacturing

Javaid Butt, Associate Professor of Digital Manufacturing, Anglia Ruskin University

12:00 - 12:30

Opportunities for Metal Additive Manufacturing in Power Electronics, Machines and Drives

Nick Simpson, Senior Lecturer, University of Bristol

Advancing Kinesthetic Learning with 3D Printed Resources

12:30 - 13:00

13:00 - 13:45

Jessica Lumry, Emerging Technologies Librarian, University of Oklahoma

LUNCH BREAK

A Collaborative Intra-Institution Approach to Train the Workforce for Additive Manufacturing

13:45 - 14:15

Mohammad Elahinia, Professor and Department Chair, The University of Toledo

14:15 - 14:45

The Medical Applications of Additive Manufacturing Materials and their Tribological Properties

Daiana Condrea, Post-Graduate Researcher, Cardi University

INTRODUCING STAGE | DAY

1

DAY ONE - Wednesday 07 June 2023

11:20 - 11:40

Changing the Economics of 3D Printing Production

Lewis Simms, Head of Industrial Product Marketing, Nexa3D

11:40 - 12:00

Bringing Digital Transformation to Composite Manufacturing with Cast In Motion Technology

Avi Cohen, VP Global Sales, Massivit

Use of Automated 3D Scanning Metrology to Increase the Efficiency and Accuracy of Additive

12:00 - 12:20

Manufacturing Processes

Adam Stanley, Managing Director, The 3D Measuring Company

Multi-Metre Parts Manufactured at the Point of Use

12:20 - 12:40

12:40 - 13:10

Dr Filomeno Martina, CEO, WAAM3D

Binder Jetting with Aluminium

Mark Dickin, Product Manager, Ricoh

Transforming Manufacturing: The Power of the UltiMaker

3D Printing Ecosystem with Briggs Automotive Company

13:10 - 13:30

Andrea Gasperini, Product Manager for Professional Market Solutions, Ultimaker

13:30 - 13:40

COFFEE BREAK

13:40 - 14:00

Picking the Right Additive Manufacturing Solution for your Application

Robert Pitts, Sales Manager, Tri-Tech 3D

14:00 - 14:20

Please refer to the app for the latest details

NANO DIMENSION

How to Unlock Quality Consistency and Repeatability to Enable Large-Scale Industrialization

14:20 - 14:40

Andreas Tietz, Head of Sales & Marketing Additive Manufacturing Technology, Zeiss

The Revolutionary Impact of Additive Manufacturing on the Footwear Industry

14:40 - 15:00

Shane Hassett, Co-Founder & CEO, WAZP; Asher Clark, Co-Founder & CDO, VivoBarefoot

15:00 - 15:20

Evolution of Metal Additive Manufacturing: Advanced Hardware, Software and Materials from EOS

Davide Iacovelli, Regional Director EMEA, EOS

15:20 - 15:40

INTRODUCING STAGE | DAY 2

DAY ONE - Wednesday 07 June 2023 cont...

Additive and Re-manufacturing of Metal Components with the Laser System ProFocus

Dr Tobias Gustmann, Customer Project Leader & Sales Engineer, Oscar PLT

Enabling Sustainability in Healthcare with Electrically Functional Non-Planar Printing

15:40 - 16:00

Anna-Marie Gorman, Principal Scientist ; Henry Rong, Product Design Engineer, CPI

DAY TWO - Thursday 08 June 2023

11:20 - 11:40

11:40 - 12:00

SolidPrint 3D - The Full 360

Ben Keyser, Technical Engineer, Solid Print

Accelerate the Pop of 3D scanner

Kaiying Wu, International Marketing, Revopoint NM

Heat Treatment Challenges for Direct and Indirect AM Methods

12:00 - 12:20

Maximillian Mungenast, Export Area Sales Manager, Carbolite Gero

NeuBeam – The Power to Deliver

12:20 - 12:40

12:40 - 13:10

13:10 - 13:30

13:30 - 13:40

13:40 - 14:00

Peter Hansford, CRO, Wayland Additive

An Introduction to the Silverstone Technology Cluster

Pim van Baarsen, CEO, Silverstone Technology Cluster

We’ve Got a Software Solution for That!

Brenda Jones, CEO, Ulendo

COFFEE BREAK

Scaling Production with Polymers and Metal Additive

Manufacturing

Maryam Qureshi, 3DP Applications Engineer, HP

Is PLA Biodegradable?

14:00 - 14:20

14:00 - 14:20

Glenn Lamming, Senior Research Scientist, CPI

Please refer to the app for the latest details

TBC

#HandsOnMetrology

www.central-scanning.co.uk

#HandsOnMetrology

Exhibitors A-Z Profile Listings

L17

1A Technologies

www.1a-technologies.com

C49

3D scanners from Zeiss/GOM include the newly released T-Scan Hawk 2 handheld 3D laser scanner as well as the fixed, tripod mounted GOM Scan 1 and ATOS Q laser scanners. The #HandsOnMetrology range are all metrology grade industrial scanners for very high accuracy inspection of parts within the class leading GOM Inspect software for reverse engineering. Further information and demonstrations available from Central Scanning Ltd.

3B3D Printing Solutions

www.3b3d.co.uk

L45

As a UK-based 3D printing solutions provider, we offer a comprehensive range of products and services for businesses and hobbyists. From high-quality products to expert services, we provide everything you need for a seamless printing experience. Browse now to elevate your 3D printing game!

Sales and production of the patented Screw Extrusion Additive Manufacturing (SEAM) system for adaptation to all kinematic solutions on the market to 3D-print fast and controllable large components. Additionally offering the HY5CAM additive and subtractive programming system for all kinematic systems.

3D MicroPrint

www.3dmicroprint.com

B48

3D MicroPrint GmbH manufactures highprecision micro metal components by using Micro Laser Sintering technology. We offer a holistic service from product design, prototyping development to serial production of your unique component.

3D Natives

www.3dnatives.com/en/

Visit our website to keep upto date with regular information in the 3D market

3D People

www.3dpeople.uk

J28

3D People is an additive manufacturing service with a straightforward, stress-free platform for ordering custom 3D-printed parts online. With rapid prototyping and agile manufacturing services under the same roof, we bridge the gap between development and volume production for all client needs. You can count on our technical team to guide you with expert advice, provide fast quotes and efficient project execution that maximises cost and time savings.

Networking via the TCT 3Sixty App

3D Print Bureau

www.3dprintbureau.co.uk

D3

At 3D Print Bureau, our clients represent the leading edge of manufacturing, construction and beyond. From mass production for multi-national corporations to rapid turnaround prototyping when time-to-market is critical, our expert team will guide you through the design process, printer choice, material selection, print technology and post-processing software, ensuring an optimised final product tailored to any industrial application.

3D Systems

www.3dsystems.com

L19

3D Systems, headquartered in Rock Hill, South Carolina, is a company that engineers, manufactures and sells 3D printers, 3D printing materials, 3D scanners, and offers a 3D printing service. Chuck Hull, the CTO and former president, pioneered stereolithography and obtained a patent for the technology in 1986.

3devo D49

www.3devo.com

Looking to up your 3D printing game? Look no further than 3devo! Our high-performance solutions take filament extrusion to the next level, creating an unmatched closed-loop circle in the industry. We work with some of the biggest brands in the world and have the expertise to help you improve your competitive edge through the customization of enhanced filament. We provide all the tools and knowledge you need to innovate in 3D printing.

3DGBIRE H19

www.3dgbire.com

We are the UK and Ireland’s premier professional 3D Printing systems provider. We help our customers integrate additive manufacturing with minimal disruption and maximum output.

3DGENCE F31

www.additive-x.com

3DGence deliver high-performance, costeffective additive manufacturing technology with a focus on industrial and professional solutions. The 3DGence ecosystem delivers on their promise of versatility, flexibility, and affordability without compromising on performance.

3DPRINTUK B59

www.3dprint-uk.co.uk

3DPRINTUK provides cost-effective alternatives to injection moulding for small, complex parts with low- to medium-volume SLS & MJF 3D printing. Our carbon-neutral, ISO 9001:2015 certified company delivers precise, durable, 3D printed parts, bridging the gap between prototyping and injection moulding. We offer flexible options for short turnaround times and production runs, serving businesses across automotive, aerospace, industrial and electronic sectors.

3DPrintworx - Europac3D B21

www.europac3d.com

Based in Cheshire, UK, 3DPrintworx by Europac3D is a leading supplier of SLS + SLA 3D printers and 3D scanning equipment throughout the UK. Uniontech large volume SLA additive manufacturing systems offer class leading quality and build volumes over 2m. The Artec Leo is the world’s first truely wireless and AI driven handheld scanner. 3D print bureau specialising in volume production runs in both PA12 and PA11 nylon.

Exhibitors A-Z Profile Listings

3DRP

www.3DRP.co.uk

3DRP are the leading supplier of 3D systems equipment in the UK and Ireland! We Provide machinery and support to a number of industries such as; Jewellery, Casting, Aerospace, Engineering and manufacturing!

Additive Manufacturing UK (AMUK) L30

www.am-uk.org.uk

This is your opportunity to speak 1-on-1 with a selection of experts from the UK’s Additive Manufacturing Community. Many of these experts are helping to shape AMUK, which is the new trade association for the sector. At the Knowledge Bar you will also be able to learn more about AMUK and why you should become a member. These are some of the leading lights in the AM industry; if they don’t know the answer to your question, they likely know someone who does!

Additive-X Ltd

www.additive-x.com

Additive-X are Additive - experts!

We’re proud to offer leading 3D printing technology solutions, carefully selected to deliver real benefits, serving our business customers across a wide range of sectors. Our services include Machine sales, Digital Parts Factory, Material sales, Subscription services, Training online and in-person, Support

Advent 3D Ltd B51

www.advent3d.co.uk

Advent 3D Ltd is dedicated solely to the supply and support of the Formlabs range of SLA and SLS 3D printing technologies. On show will be the Form 3+ range and 3L range of desktop SLA printers, together with the exciting Fuse 1+ 30W - Formlabs’ affordable and compact SLS solution capable of producing highly robust end-use parts at very low cost. With its dedication to one brand, Advent3D can offer unmatched service and support to its customers.

Aesub

www.aesub.co.uk

AESUB – a revolutionary scanning spray, that helps to digitise reflective and transparent surfaces.

AESUB sprays (Blue, Orange, Green, Yellow and Transparent) enable faster, more efficient and more accurate 3D scanning, no more mess, no more cleaning, easy to apply, thin layer, super quality whilst disappearing after use.. AESUB White is a permanent scanning spray that needs to be removed manually.

SPRAY - SCAN - DONE

INTRODUCING

With a large 19.5L build volume and print speed of up to 24cm per hour, XiP Pro delivers a new level of 3D printing productivity. See it in action at TCT 3Sixty, Hall 1, Stand E49

Airtech Advanced Materials Group B30

www.airtech3d.com

Airtech expertise has added value to Large Scale Additive Manufacturing and taken it to the next level. Airtech is utilizing its facilities in TN (USA) & Luxembourg to house a pair of 40ft x 10ft (12m x 3m) large scale additive manufacturing machines to offer its Print-Tech® full-service tool manufacturing solution. Exclusively with Dahltram® resins, in-house researched and developed specifically for advanced composite tooling applications.

Exhibitors A-Z Profile Listings

All 3D Labs

www.all3dlabs.com

L1

At All 3D Labs we provide high-quality 3D printing services for prototyping and low volume manufacturing, transforming how our customers develop prototypes and end-user parts, or even manufacture production runs. Utilising our HP Multi Jet Fusion 3D printer and DyeMansion Vapour smoothing technology, our print-toproduct workflow enables businesses to lower their costs and shorten lead times, producing parts with injection moulded-like quality.

AM Polymers K29

www.am-polymers.de

Producer of polymer powders (PP, TPU, PBT, PA6, PA66, PE, PA11 and PA11) for Powder Bed Fusion 3D Printing. With our broadest material portfolio for SLS we set a NEW STANDARD FOR INDUSTRIAL 3D PRINTING and deliver plug & play polymer powders for 3D printed end-use applications. As AM system engineers we are proven experts for the production of qualified easy processable plastic powders for laser sintering (SLS) and high speed sintering (HSS).

AM Solutions

www.solutions-for-am.com

C39

AM Solutions – 3D post processing technology (part of the Rösler Group) is respected as a dominant player in the field of post-processing of AM parts made using the full range of AM processes in a range of materials. The company’s success is based on eight decades of experience supplying finishing technologies for traditional manufacturing processes, and it is able to pragmatically address the unique characteristics of AM post-processing from this perspective

AME-3D

www.ame-3d.co.uk

L1

AME-3D is one of the UK’s longest standing additive manufacturing service businesses. Offering SLA, SLS, vacuum and RIM casting, with various materials and post processing capabilities.

We serve large blue chips to SMEs, delivery high quality prototypes, end use parts, space models and manufacturing support.

AMFG

www.amfg.ai

G51

AMFG provides MES and workflow software that empowers organisations to manage and scale their additive manufacturing processes. With machine connectivity and software integrations, our software offers a complete workflow solution to help businesses achieve connected, scalable AM processes across their organisations and supply chains. Our mission is to help companies around the world unlock the full potential of additive manufacturing.

Networking via the TCT 3Sixty App

Amtech Rapid Prototyping Ltd J40

www.amtech-rp.com

Amtech Rapid Prototyping’s key services include 3D Printing, Vacuum Casting & Forming, Part Finishing and Model Making.

Based in the North East of England, Amtech RP comprises of a team with impressive experience in the Rapid Prototyping Industry. We are continuously investing in new staff, technology, materials and together with our model-making and finishing skills we are second to none. We are dedicated to providing an excellent service at the right price.

Ankermake C29

www.ankermake.com/uk

We’re a group of engineers and hobbyists who love to make exciting prints that we can geek out about with our friends. We also understand the frustration of long wait times, droopy curves, and stringing. We’re here by your side with a maker spirit and intelligent technology empowered by the leader in global charging, Anker Innovations. Let’s embrace a future with 3D printing that’s faster, smarter, and friendlier.

AON3D C29

www.aon3d.com

Founded in 2015, AON3D is a venture capitalbacked, Montreal-based additive manufacturing hardware, software, and material company. Our solutions drive innovation for hundreds of businesses in 25+ countries worldwide, ranging from small businesses to multinational Fortune 500 corporations. Vision is to build products that companies rely on every day to tackle humanity’s toughest technical problems - saving the planet, saving lives, and exploring space. We believe Industrial 3D Printing should be accessible, open, and should encourage businesses to explore what’s possible.

Artec

3D

www.central-scanning.co.uk

L17

Manufacturers of professional handheld 3D scanners including the Eva, Space Spider and Leo as well as the desktop mounted automated Micro and long-distance Ray. All Artec 3D scanners capture both geometry and texture/ colour enabling photo real 3D images to be created.

Central Scanning are the only Artec 3D Ambassador & Gold Certified resellers in the UK.

ARMSTRONG RAPID MANUFACTURING

www.armstrongrm.com

Armstrong RM Corporation:

M3

Our company manufactures metal and plastic components in prototype and low-volume production quantities. Whether it is 1 or 5,000 parts, we deliver production-grade components and assemblies that meet your demanding delivery schedules.

With many complementary processes, we can assist you in producing everything from prototype die castings to large plastic enclosures. I look forward to meeting you at the TCT Show. Best, Paul Armstrong

Autodesk

www.autodesk.com

E29

Autodesk’s mission is to empower innovators with design and make technology so they can achieve the new possible. Our software spans architecture, engineering and construction, product design and manufacturing, and media and entertainment, empowering innovators everywhere to solve challenges big and small. Whether it’s Fusion 360 you are looking for, or something more intricate like Netfabb for your AM needs - then Autodesk is the solution for you.

BASF H19

www.forward-am.com

Forward AM is part of BASF and in Emmen the FFF department of Forward AM is housed, where the Ultrafuse filaments are produced and sold. One of the largest manufacturers in Europe with an exclusive focus on filaments for FFF printing.

Exhibitors A-Z Profile Listings

BCN3D @ 3DGBIRE

www.3dgbire.com

Ltd

Based in Barcelona, BCN3D are one of the leading developers and manufacturers of 3D printing solutions in the world. Delivering the best quality tools to both professionals and industry level users.

H19

BCN3D @ Additive-X

www.additive-x.com

F31

BCN3D’s signature IDEX technology brings you the most productive FFF 3D printing solutions including their Epsilon range which has advanced calibration systems to which ensure that the first printed layer is always perfect.  Additive-X are a UK preferred reseller for BCN3D

Boston Micro Fabrication K49 www.bmf3d.com

Boston Micro Fabrication (BMF) manufactures high precision micro 3D printers for diverse use cases that require the unique combination of excellence in three key areas: resolution, accuracy, and precision. Using polymer and composite additive manufacturing, BMF is able to produce high-precision/high-tolerance industrial parts (2_m printing resolution and +/- 10µm tolerance).

Boston Micro Fabrication @ 3DGBIRE Ltd H19

www.3dgbire.com

Boston Micro Fabrication is the world leader in advanced additive manufacturing solutions based on Projection Micro Stereolithography (PµSL) technology. Many leading companies worldwide are adopting PµSL to 3D print true microstructures with ultra-high printing resolution (2µm~50µm) and printing tolerance (+/- 10µm ~ +/- 25µm).

Builder F31

www.additive-x.com

Expanding access to digital fabrication, so anyone can make anything. The Builder Extreme is one of the biggest FDM 3D printers on the market capable of producing large and highly detailed prototypes, molds, fixtures or even functional parts. Builder3D are making large scale 3D printing affordable and accessible. Additive-X is Your Certified 3D Printing from Builder Partner.”

Networking via the TCT 3Sixty App

Cadspec

www.cadspec.co.uk

E29

Cadspec is one of the UK’s leading suppliers of Autodesk CAD/CAM software & training. With over 30 years in the industry, we are ideally placed to review your design requirements, whether architectural or mechanical, and find the right solution for you. We aim to help maximise your productivity, improve accuracy and provide the return on investment your company requires.

CDG 3D Printers

www.cdg.uk.com

N65

CDG 3D TECH offers professional 3D Printers and Additive Manufacturing solutions. We are UK partners for 3D Systems, Intamsys, Sinterit, Omni3D, Fusion and Wematter. With 3D Systems we offer the super-fast Figure-4 Standalone and Modular DLP printers and high-resolution ProJet 2500 MJP and CJP colour 3D printers. We supply Intamsys Funmat HT, 410, 610 HT high-temp printers, Wematter Gravity & Sinterit Lisa X SLS printer, Omni F2.0 Net. and Fusion EDGE.

CDG 3D Scanner

www.cdg.uk.com

N62

CDG: 3D SCANNERS supplies products from Shining3D and Evatronix. The 3D scanners include EinScan-Pro HD, EinScan H & HX, FreeScan UE Pro handled scanners for reverse engineering and inspection. TranScan C is a desktop device for 3D scanning in full colour. The Evatronix range includes Optima, Quadro, Fine Precision and Evixmatic for super-high resolution scanning, metrology and inspection applications.

CDG 3D Systems

www.cdg.uk.com

N60

CDG are the UK’s leading supplier of 3D SYSTEMS product line of professional 3D printer. CDG offer the ProJet 2500 Plus, W and IC multijet MJP printers for high resolution, the ProJet 660 Pro for full colour CJP and the Figure 4 DLP for high-speed printing in production materials.

Central Scanning Ltd

www.central-scanning.co.uk

L17

We are a 3D Scanning, 3D Printing, RE and Inspection specialists based in Bromsgrove, and are the only Artec 3D Ambassador & Gold Certified resellers in the UK, providing 3D scanning equipment and related software. We are also part of the #HandsOnMetrology network and can provide sales, training, and ongoing support. In addition to our 3D scanning sales/services, we offer a comprehensive 3D printing service utilising our range of in-house 3D Printers.

Centre for Advanced Manufacturing

A38 www.bolton.ac.uk

Based at the University of Bolton, the CfAM mission is to make additive manufacturing, composites, and testing capabilities physically and financially accessible, and train the next generation of AM experts. The main benefit of working with the CfAM is our experience of R&D across industries. We want to support aerospace, space, automotive, medical, dental, oil & gas and many other industries to explore the use of AM technology for their business.

Complete Fabrication K9

www.compfab.co.uk

Complete Fabrications have been established for well over 25 years, supplying both prototyping and low to medium production parts. We are committed to serving clients with a highly respected and sought after service, built on a strong collaboration where our engineers become an extension of our clients design team. This relationship allows faster and smother transition from design to deliverable.

Exhibitors A-Z Profile Listings

CPI connects the dots within the innovation ecosystem to make great ideas and inventions a reality to benefit people, places and our planet. We’re a pioneering social enterprise that accelerates the development, scale-up and commercialisation of deep tech and sustainable manufacturing solutions. Through our incredible innovation experts and infrastructure, we look beyond the obvious to transform healthcare and drive towards a sustainable future.

Creatbot C29

www.creatbot.com/en

Henan Creatbot Technology Limited is the first batch enterprises who specializing in the developing and manufacturing of desktop 3D printer in China. We are leader of professional large scale 3D printer with products D600 Pro, F1000 model and leader of professional ultra high temperature 3D printer with products F430 and PEEK-300. The brand “”CreatBot”” established in 2011, has now become one of the largest professional 3D printer manufacturers in central China. The annual sales volume exceeds over 3,000 sets of large size professional 3D printer. Our products has achieved over 30 patents, certified by CE, FCC, RoHs Organization, and sold to over 60 countries.

Desktop Metal F29

www.matsuura.co.uk

3D print high quality, complex end-user metal components, in a wide arrange of materials on your desktop with Desktop Metal Studio System 2 and Fiber composite carbon fibre 3D printer.

Defiant3D

www.Defiant3D.com

L39

Brought to you by Defiant3D, the Defiant200 metal 3D printer will use our revolutionary Patent Pending Cold Deposit and Sinter (CDS) technology. Empowering small and medium business to manufacture metal parts in house. A significantly lower cost ecosystem of hardware, software and materials that work in harmony with one another.

Excepted retail price - £40,000

Defiant3D - Make Things Better

DEVELOP3D

www.develop3d.com/registration

H62

DEVELOP3D Magazine gets hands on with the very latest in product development technology and shows how it can help leading design and engineering firms take products from concept all the way to manufacture and operation.

Key topics range from 3D CAD/CAM/CAE software and workstation technology to 3D printing, reverse engineering, and design visualization.

DEVELOP3D is available in print and PDF, The magazine features a bold contemporary design and is FREE to UK.

NETWORKING VIA THE APP

Connect with speakers, sponsors and exhibitors with direct messaging and appointment scheduling.

Build your own personal schedule with 1-2-1 appointments, your must-see exhibitors, products and services, and the full conference programme.

Discover new products and services relevant to you with AI-powered recommendations.

Find your way to exhibitor stands and feature areas with the live floorplan.

Stay up to date with real-time messaging, alerts, social feeds and news updates.

DigiFabster

www.digifabster.com

Exhibitors A-Z Profile Listings

A40

DigiFabster provides your CNC machining and additive manufacturing shop with the tools to process quotes in minutes, generate instant quotes and orders 24/7 online, and simplify getting paid. Digifabster is quick to implement, easy to use, and flexible. You can be up and running in just a few hours!

DMG

DMG MORI is a leading global manufacturer of machine tools and is driving holistic process integration based on technology integration, automation and digitization for greater sustainability. In the “”Global One Company””, more than 12,000 employees work together to be a total solution provider for our customers.

DMG MORI is represented in 43 countries worldwide - with 16 production sites and 113 sales and service locations.

DyeMansion @ Laser Lines

D51 www.dyemansion.com

DyeMansion is the global leader in postprocessing solutions for industrial polymer 3D-printing that turns 3D-printed raw parts into high-value products. From perfect fit eyewear to personalized car interiors, our technology makes 3D-printed products become a part of everyday life. We combine industry-leading hardware with the widest range of color and surfacing options on the market. Our systems can be integrated seamlessly into various production processes.

DyeMansion @ Matsuura

www.matsuura.co.uk

F29

DyeMansion is the global leader in postprocessing solutions for industrial polymer 3D-printing and the only provider of a complete, fully integrated end-to-end solution for all finishing steps. From perfect fit eyewear to personalised car interiors, our technology makes 3D-printed products become a part of our everyday life. Our Print-to-Product workflow combines industry-leading hardware with the widest range of colour options on the market.

Enable Manufacturing Ltd

www.enable.parts

Enable is bringing a new, innovative manufacturing process to life – Additive Casting®.

E30

Eolas Prints K1

www.eolasprints.com

Bridging the gap between casting and additive manufacturing: all the benefits of Additive at the price of Casting. Parts from a few grams to several tonnes in over 200 different metals all for a fraction of the cost with no limitations of tooling.

What can we make for you...?

Welcome to Eolas Prints, your go-to source for all your 3D printing needs. Our team based in the heart of Cantabria, Northern Spain is proud to provide 3D printing solutions to bring your innovative ideas to life. We offer innovative 3D printers, materials and services that allow you to bring your visions to life. We believe that 3D printing technology has the potential to revolutionise the way we create objects.

Networking via the TCT 3Sixty App

ETEC 3D Printers F29

www.eos.info/en

EOS is leading supplier for responsible manufacturing solutions via industrial 3D printing technology. With our innovative EOS 3D printers, we are leaders in technology and quality for high-end solutions in additive manufacturing (AM). Founded in 1989, we are pioneers in the field of metal 3D printing (DMLS) and providers of highly productive systems for additive manufacturing with plastics.

www.matsuura.co.uk

ETEC offers a variety of 3D printing systems with the ability to mass produce polymer parts with the speed and quality needed for demanding end-use applications. ETEC printers deliver parts with exceptional accuracy, superior part properties, fine feature detail, and smooth surface finish at a scale and cost that is competitive with traditional manufacturing techniques like injection molding.

Evatronix

N62 www.cdg.uk.com

Evatronix manufacture high resolution 3D scanners for high-end applications. The scanners can be set-up via tripod, cobot or automated turn & tilt stations. The product line of 3D Scanners includes:-

Optima

Quadro

Fine Precision

Wide Range

Evixmatic

FIBRETHREE

www.3dgbire.com

H19

Bringing together the requirements of strength, media resistance, dimensional accuracy with the actual capabilities of printers and desires of users.

It’s key for the creation of a valuable part in prototyping or serial production.

Evo3d C29

www.evo3d.co.uk

Evo 3D provide a full 360 solution for your AM needs from supply of 3D printers approved by our in-house team to ensure you purchase the correct printer for your needs. We also offer AM audits, personal consultations, training and technical support, plus we can print your project in our in-house print facility.

We are committed to providing excellent customer service, technical support and impartiality, working with a wide range of print manufacturing brands.

Filament PM

www.shop.filament-pm.com

L45

FILAMENT PM is located in the Czech Republic and it has an experience with the filament production for more than 10 years. FILAMENT PM produces high quality filament in wide range of colours. We offer basic materials as PLA, PETG or PLA+ to more complex and industrial materials as PAJet, CFjet, or Ultem. We produce also recycled PETG or PLA+. Our NEW - 5 x 300g Tasty packs. Our activity is based on three main pillars - Better, more Simple and Sustainable.

Exhibitors A-Z Profile Listings

Formlabs

@ Additive-X

F31 www.additive-x.com

Additive-X partnered with Formlabs in the days of the Form 1! Formlabs pushes the boundaries of affordable 3D printing with its next generation SLA technology, known as Low Force Stereolithography (LFS), and its benchtop Selective Laser Sintering (SLS) Fuse Series. The Form Series includes the Form 3+, Form 3B+, Form 3L, and the Form 3BL, plus the postprocessing units, Form Wash and Form Cure.

Formlabs @ Advent 3D

In 2011, three MIT graduate students built the first 3D printer that could achieve industrial, professional part quality at an affordable price. Through continuous commitment to innovation, Formlabs has become the largest supplier of professional stereolithography (SLA) and selective laser sintering (SLS) 3D printers in the world.

Fusion3

N65 www.cdg.uk.com

Fusion3 is a Greensboro, North Carolina company which manufactures 3D printers for commercial and education use. Fusion 3D Printers use fused deposition modeling to create three-dimensional solid or hollow objects from a digital model, which can be designed or produced from a scan.

Geomagic

/ Oqton

N62 www.cdg.uk.com

Geomagic is the professional engineering software brand of 3D Systems & Oqton. Geomagic software comes in the following packages:-

WRAP for reverse engineering

DESIGN X for scan-to-CAD with parametric features

CONTROL X for inspection

FREEFORM for digital clay modelling

Hottinger Bruel & Kjaer UK

C5 www.hbkworld.com

HBK are the product physics experts, providing integrated solutions and world-leading expertise across all test and measurement domains. This enables engineers to drive innovation throughout every stage of the product creation process, with streamlined development cycles and faster time-to-market.

We deliver value beyond measure by helping our customers bring safer, more energy efficient and innovative products to life – faster.

HP

@ 3DGBIRE Ltd

H19 www.3dgbire.com

Unlock the full potential of MJF 3D printing technology. Transform part properties voxel by voxel enabling a future of limitless applications, materials, and colours. Imagine a future where we can produce ‘smart parts’ with embedded electronics and integrated traceability and intelligence. Drive new growth and expand into volume production with HP’s robust, manufacturing-ready industrial 3D printers.

Networking via the TCT 3Sixty App

HPI Technology

“3D by HP” and “Additive by Matsuura” are becoming synonymous with UK manufacturers for high quality, high value Multi-Jet Fusion 3D printing machines and close contact service and support.

Matsuura are an award-winning reseller of HP MJF products and operate out of a state of the art Additive Manufacturing Centre in Leicestershire with over 75 HP MJF machines under our care with UK manufacturers – from mass producers, to bespoke proto type makers.

Incremental

Incremental Engineering Ltd works in partnership with SMEs on their adoption of Additive Manufacturing within standard production. The company specialises in using and getting the most from HP Multi-Jet Fusion (MJF) to produce production components for OEMs and consumers.

Jerry Sutton will be attending TCT for Incremental Engineering and brings 25 years of machine design and build experience with him. He will be available for the duration of the event.

HPI Tech is a small UK-based online retailer, offering a variety of 3D printing products to hobbyists, businesses, and education. Established in 2021, we aim to provide a simple shopping experience and offer friendly support. From filaments to thermistors and nozzles to motors, our growing range focusses on offering a comprehensive and competitive one-stop shop. We retail quality brands, some of which are on display in our pop-up store at TCT this year!

Inkbit

www.inkbit3d.com

Inkbit is an additive manufacturing company located in Massachusetts. The Inkbit Vista™ system is designed for mass production of end-use polymer 3D printed parts. Incorporating a novel technology called Vision-Controlled Jetting (VCJ), Inkbit delivers high-resolution additive manufacturing, enabling users to produce parts with extreme dimensional accuracy and precision at high volume with high speed.

Inkbit @ CDG 3D Printers N65

www.cdg.uk.com

Inkbit is an additive manufacturing company located in Medford, Massachusetts. Our Inkbit Vista™ system is designed for mass production of end-use polymer 3D printed parts. We have incorporated a novel technology called Vision-Controlled Jetting (VCJ) that delivers high-resolution print capability enabling users to print parts with dimensional accuracy and precision at high volume. “

Intamsys

www.cdg.uk.com

INTAMSYS provides 3D printing and industrial additive manufacturing solutions for highperformance and high-temp materials. The range of printers includes the Funmat HT high-temp desktop printer, the new Funmat Pro 310 IDEx pornitrer, the Funmat Pro 410 hightemp printer and the top-of-the-range Funmat Pro 610HT.

The materials Instamsys focuses on includes PEEK, Ultem, PEAK, PEKK, PPSU, PPSD, PSU, PC, PA-CF, ABS, ASA and many others.

IPFL - Bespoke Plastic Parts F41

www.ipfl.co.uk

Precision Plastic Machining, Fabrication and 3D Printing Specialists

IPFL supply a parts-on-demand service through versatile technologies – PµSL, MJF, Polyjet, SLA, FDM and CNC machining

20 years of 3D printing services

54 years machining & fabrication

UK’s first BMF micro 3D printing service! This new service runs alongside well-established prototype and production services utilising the latest technologies for industrial, precision plastic components

JZCX Industry Co., Ltd.(Antinsky 3d) H39 www.antinsky.cn

Antinsky3d:

3d Printer: Phrozen, ELEGOO, Creality, Anycubic, Artillery, Flashforge, Twotrees, Flsun,QIDI, Dowell...

3d Filament: eSUN, Polymaker, Antinsky, Sunlu

3d Resin: Phrozen, Antinsky, Anycubic, Elegoo, Creality, Sunlu

3d Scanner: Shinning, Revopoint, Scantech, Thunk3d Industry 3d Printer: KINGS, Protofab, BLT, ZRapid, Antinsky

Clay&Concrete 3d Printer: Antinsky-ZCC

Clay 3d Printer: Antinsky-ZCC, Tronxy

Laser: Yueming, FLUX,Senke,Towtrees

KUKA C29

www.kuka.com

KUKA is a global automation corporation with sales of around 3.3 billion euro and roughly 14,000 employees. The company is headquartered in Augsburg, Germany. As one of the world’s leading suppliers of intelligent automation solutions, KUKA offers customers everything they need from a single source: from robots and cells to fully automated systems and their networking in markets such as automotive, electronics, metal & plastic, consumer goods, e-commerce/retail and healthcare.

Exhibitors A-Z Profile Listings

JEOL

JEOL Group Companies have been conducting business in three segments: Scientific and Metrology Instruments, Industrial Equipment, and Medical Equipment. Now, using the technology of the world’s highest-level performance electron microscope and electron beam lithography system for semiconductor manufacturing, JEOL has developed an “”Electron Beam Metal AM Machine”” that can produce high-density, high-strength parts with high-power and high-speed electron beam.

Kimya

www.3dgbire.com

Armor has developed Kimya as a response to shifts in manufacturing processes which we are familiar with, being manufacturers ourselves. Our goal is to design and produce 3D materials with a high level of added value to meet the growing needs of a market which is constantly searching for ever more intelligent solutions. It is vital to optimize our resources and to become even more flexible to be able to face the new challenges of industrial manufacturing.”

Laser Lines Ltd D51

www.3dprinting.co.uk

As a Stratasys Platinum Partner, our FDM and Polyjet system portfolio has expanded with the addition of their SAF, Stereolithography and P3 polymerisation technologies. Part samples and live demonstrations will be available at the stand. A full end-to-end manufacturing solution with DyeMansion post-processing technology will be highlighted and our portfolio is further strengthened by the XACT Metals affordable 3D printer range.

U R V I S I O N

T o o r g a n i z e t h e w o r l d ’ s 3 D p r i n t i n g p r o d u c t i o n a n d m a k e i t a c c e s s i b l e a n d u s e f u l

T o d e v e l o p s e r v i c e s f o r s u s t a i n a b l e o n - d e m a n d p r o d u c t i o n c l o s e t o t h e p o i n t a n d t i m e o f n e e d

o t j u s t f o r s o m e . B u t f o r e v e r y o n e .

W H Y W A Z P ?

NETWORKING VIA THE APP

Making the most of your time at TCT 3Sixty just got a lot easier with our new enhanced app.

The TCT 3Sixty app brings everything happening at the show to your device allowing you to plan, connect and network before, during and after the event.

Connect with speakers, sponsors and exhibitors with direct messaging and appointment scheduling.

Build your own personal schedule with 1-2-1 appointments, your must-see exhibitors, products and services, and the full conference programme.

Discover new products and services relevant to you with AI-powered recommendations.

Find your way to exhibitor stands and feature areas with the live floorplan.

Stay up to date with real-time messaging, alerts, social feeds and news updates.

Liberty Powder Metals

D39

www.libertysteelgroup.com/uk/our-locations/ liberty-powder-metals/

From state-of-the-art facilities in the UK, Liberty Powder Metals provide vacuum inert gas atomisation of steel, nickel and cobalt alloys deploying anti-satellite technology optimised for Additive Manufacturing. When you need confidence in the consistency and continuity of quality metal powders choose LIBERTY Powder Metals. Utilising the full suite of powder characterisation and testing coupled with our unique optimisation processes ensures consistent quality.

Exhibitors A-Z Profile Listings

Lighthouse (UK) Ltd

www.lighthouse.uk.com

M2

Lighthouse (UK) Ltd supplies sign and label systems which are used extensively, by manufacturing, maintenance and processing companies throughout the UK. Typical applications include; asset labels, instruction labels, serial number identification, rating plates, small data labels, labels incorporating 2D barcodes, equipment ID, shadow boards, electrical marking and specialist labels.

Lynxter H19

www.3dgbire.com

The right material with the right process: as a modular 3D printer, the S600D is revolutionizing additive manufacturing with its set of interchangeable toolheads that make it possible to print an infinite range of materials. Connected, interconnectable, online/offline, adapted to market standards. Lynxter’s user-friendly software suite and API can be easily integrated into all your business processes.

Mackart Additive TCT Connect Lounge

www.mackartadditive.com

Additive Engineering for Additive Manufacture and 3D Printing. Mackart Additive has the experience and expertise to take your idea, your concept or even your finished design to reality with the power of Additive Manufacture and 3D Printing. Mackart has in house 3D printing capability covering FDM, CFF, FFF, SLA and Polyjet with engineering and prototyping materials available. We work alongside your team to add value and solutions throughout project lifecycles.

MakerBot @ Tri-Tech 3D

www.makerbot.com

E29

MakerBot is a global leader in desktop 3D printing, we set the standard in reliability and ease-of-use by providing effective solutions for every stage of the desktop 3D printing process. Visit stand E29 and see the MakerBot Method first hand and discover limitless 3D Printing.

Makertech 3D

www.makertech3d.com

H60

At Makertech 3D, we are a leading open-source 3D printer manufacturer dedicated to pushing the boundaries of additive manufacturing. Our passion for innovation and collaboration drives us to develop cutting-edge technologies. Our flagship product, the Proforge 4, is a highspeed, tool-changing, multi-material 3D printer that delivers unmatched performance and versatility. With a commitment to quality and an engaged community, we empower makers and professionals to explore new possibilities and redefine the world of 3D printing.

Networking via the TCT 3Sixty App

Manchester Metrology J41

www.manchester-metrology.co.uk

Manchester Metrology offers a portfolio of services from scanning and CMM, to reverse engineering and laser inspection to a full spectrum of industries across the UK and abroad.

Investment in new technology and fast response to customer needs have positioned the company as a leader in its field.

Markforged @ Additive-X

www.additive-x.com

The Digital Forge - software + materials + 3D printers.  Create strong, functional, productionready parts on the Markforged additive manufacturing platform.  Their range includes the  Metal X System which is safe and easy to use in a wide range of advanced metals from stainless steel to copper.

Massivit C19

www.massivit3d.com

Massivit brings to market a portfolio of groundbreaking, large scale 3D printers that are transforming manufacturing across 40 countries in a range of industries including automotive, marine, rail, consumer goods, sporting goods, and scenic fabrication. Produce full-scale, custom production parts, industrial molds, or functional prototypes within hours.

Matsuura LUMEX F29

www.matsuura.co.uk

As pioneering technology innovators creating the production platforms for the manufacturers of tomorrow, the spirit of our company’s founder lives on. For over a decade Matsuura has been developing the LUMEX Avance-25 - the world’s first 3D Printing, Metal Laser Sintering Milling Hybrid CNC machine tool – an innovative platform in Net Shape Form and Additive Manufacturing, with the integration of a Matsuura high speed milling spindle for subtractive machining

Matsuura

Machinery Ltd

www.matsuura.co.uk

F29

Matsuura - award winning suppliers of era defining 3D printing machines and world leading automated CNC machine tools.

Operating from a state of the art facility in Leicestershire, we provide UK manufacturers with the best available CNC machining solutions and 3D printer technology, backed by world class customer support and outstanding multi-skilled engineers.

Visit us - stand F29 at TCT2023.

Mayku

www.3dgbire.com

H19

Take full control. Create what is needed, where and when it’s needed with the Mayku Mulitplier. Get ready to create ultra precise, long lasting moulds and production parts in minutes. Form sheets up to 8mm in thickness and unlock the next level of desktop manufacturing.

Meltio H19

www.3dgbire.com

Meltio takes metal additive manufacturing to the next level by developing high-performance, affordable, and easy-to-use metal 3D printing solutions using wire LMD technology. The company’s mission is to delight customers, partners and employees by pioneering the development of affordable metal 3D printing systems that are reliable, safe, and powerful, continually reinforcing their status as disruptors.

Exhibitors A-Z Profile Listings

www.hybridservices.co.uk

Entering 3D printing in 2018, Mimaki used its decades of 2D printing knowhow and experience to push the envelope of full colour 3D printing. The manufacturer’s latest full colour 3D printers offer unrivalled quality combined with the ability to print in 10,000,000 colours to deliver solutions with broad commercial appeal. Distributed in the UK & Ireland by Hybrid Services, the 3DUJ-2207 printer will be demonstrated by Authorised Mimaki Partner, RA Smart.”

Mimaki / R A Smart F59 www.rasmartmachinery.co.uk/productcategory/large-format/3d-printers/

Entering 3D printing in 2018, Mimaki used its decades of 2D printing knowhow and experience to push the envelope of full colour 3D printing. The manufacturer’s latest full colour 3D printers offer unrivalled quality combined with the ability to print in 10,000,000 colours to deliver solutions with broad commercial appeal. Distributed in the UK & Ireland by Hybrid Services, the 3DUJ-2207 printer will be demonstrated by Authorised Mimaki Partner, RA Smart.

miniFactory H19

www.3dgbire.com

miniFactory is an industrial 3D printer manufacturer. Our passion drives us for high-performance polymer 3D printing, and the best results for industry-class 3D printed parts. Let’s renew your part manufacturing together! The miniFactory Ultra is a one-of-a-kind industrial 3D printer that allows you to manufacture high-quality parts cost-effectively and quickly when and where needed. Whether you need a single prototype or an extensive series of specific com

Modix C29

www.modix3d.com

Modix is a Tel-Aviv based, global developer of large-scale 3D printers. By offering massive build volumes, premium components, and high-quality printing, Modix is broadening access to full scale 3D printing for product developers and industrial workshops worldwide.

Nano Dimension D29

www.nano-di.com

By offering massive build volumes, premium components, and high-quality printing, Modix is broadening access to full scale 3D printing for product developers and industrial workshops worldwide.

Networking via the TCT 3Sixty App

National Centre for Motorsports Engineering

A38

www.bolton.ac.uk/explore-our-schools/ national-centre-for-motorsport-engineering/

We are proud to be the UK’s only National Centre for Motorsport Engineering (NCME). Our £13 million state-of-the-art facilities, passionate tutors and engaging modules help place our students in pole position for a rewarding career.

NEWAM B40

www.newam.uk

NEWAM (New Wire Additive Manufacturing) is a £10M research programme to develop the next generation of large-scale wire-DED AM. A team of over 60 people, including PhD students, researchers and academics from Cranfield, Manchester, Coventry and Strathclyde Universities, are developing new processes, materials, models, sensors and NDT tools to guarantee as-built structural integrity and achieve high-build rate, net-shape, homogeneous material properties used.

Nexa 3D @ PLG Engineering

www.plgglobal.co.uk

J31

Nexa3D is a leading provider of ultrafast 3D printing solutions. which offers a range of resin and SLS-based industrial 3D printers all delivering unrivalled speed and throughput, superb surface finish, and an open material platform. Our patented Lubricant Sublayer Photo-curing (LSPc) 3D printing process unlocks productivity gains by as much as 20x greater than those of conventional SLA or DLP processes.

Nexa3D is the leading provider of ultrafast polymer 3D printing technologies. The company makes industrial resin and SLS 3D printing solutions that deliver up to 20x productivity gains to professionals and businesses of all sizes. Partnerships with world-class material suppliers and its open materials platform unlock the full potential of additively manufactured polymers for volume production.

OERLIKON

www.oerlikon.com

L10

At Oerlikon AM, we’re integrating and scaling the entire Additive Manufacturing value chain to handle your project from beginning to end. By offering materials and surface technologies, design, production and testing of industrial metal-based components, we are uniquely positioned to advance the industrialization of 3D printing. Solutions include materials, engineering, manufacturing processes, post-processing of parts and quality management.

We are a leading manufacturer of large-format FFF 3D printers. By offering a build volume at approximately 125dm3 our printers make an attractive solution for large parts and small batch production. We are constantly working on the development of products and services. Our goal is to use Omni3D systems to optimize production processes, in which the use of 3D printing will save time and money.

One Click Metal

www.oneclickmetal.com

Exhibitors A-Z Profile Listings

E29

One Click Metal is committed to making Metal Additive Manufacturing technology more accessible and affordable while prioritising safety. The company’s vision is to simplify complex technologies, making them understandable and approachable for everyone. On Stand E29 we will be showcasing the OCM BOLD Series MPrint+ 3D Printer with an array of metal 3D printed parts on show.

Oqton

www.central-scanning.co.uk

Scanning software for inspection via Geomagic Control X, reverse engineering through Geomagic Design X, hybrid modelling via Geomagic Freeform.

OSCAR PLT

www.oscar-plt.de/en/home/

C51

OSCAR PLT is the research company of the Kjellberg Foundation in Germany. The main corporate purpose is the development of novel and innovative plasma and laser technologies for industrial applications (cutting, welding and additive manufacturing). Here, the ProFocus products of OSCAR stand for easy-to-integrate and customizable laser metal deposition solutions which can utilize wire and powder feedstocks in one system.

Phaetus

www.phaetus.com

Phaetus is committed to the design of extrusion system of filament in-and-between, research and development of the printing filament as well as printing process. At the same time, we provide customers with software and hardware integrated system solutions such as filaments, hotends and printing process based on different applications.

Photocentric H19

www.3dgbire.com

Innovators in Photopolymer

The most widely used, heavily optimised, reliable and low-cost digital imaging device in the world? Not a laser or digital light projector all of our printers use LCD screens. We manufacture 3D printers with tailor made high resolution screens in all formats; near eye, phone, table, PC up to the large format TV.

Engineering

As PLG Engineering, we provide value-added engineering and manufacturing services using 3D technologies with over 40 employees and 4 offices in two countries since 2013. We specialise in sketch design to mass production, using cutting-edge technologies and collaborating with top 3D printing brands to provide the best service for our clients. Our primary services include additive manufacturing, injection moulding, vacuum casting, RIM, 3D printing & scanning.

NETWORKING VIA THE APP

Making the most of your time at TCT 3Sixty just got a lot easier with our new enhanced app.

The TCT 3Sixty app brings everything happening at the show to your device allowing you to plan, connect and network before, during and after the event.

Getting Started

Download the TCT 3Sixty mobile app to your device from the App Store or Google Play.

Log in to the app using the same email address and password you used when registering for TCT 3Sixty. If you haven’t had a chance yet, visit www.tct3sixty.com and sign up now –it takes less than 5 minutes.

You will receive a confirmation with your login details, and you are all set!

Key Features

Connect with speakers, sponsors and exhibitors with direct messaging and appointment scheduling.

Build your own personal schedule with 1-2-1 appointments, your must-see exhibitors, products and services, and the full conference programme.

Find your way to exhibitor stands and feature areas with the live floorplan.

Stay up to date with real-time messaging, alerts, social feeds and news updates.

Discover new products and services relevant to you with AI-powered recommendations.

Poligon Muhendislik J31

www.poligonmuhendislik.com

Poligon Muhendislik started its operations in 2013 with an experienced team of engineers with over fifteen years of industry experience. With a focus on 3D technologies, the company provides value-added engineering services to top organisations in various sectors such as defence, aviation, automotive, white goods, plastics, medical, electrical/electronics, architecture, and education under the roof of PLG Group.

Exhibitors A-Z Profile Listings

PostProcess

www.cdg.uk.com

At PostProcess Technologies, our comprehensive system of proprietary software, patent-pending hardware, and additive formulated chemistry works together to remove the bottleneck in the third step of additive manufacturing — post-printing. We make the process of removing supports and surface finishing the printed parts easier, more consistent and more efficient. We have a comprehensive range of products to make your like easier when processing 3D printed parts.

PrintCity C41

www.printcity.mmu.ac.uk

PrintCity is a 3D additive and digital manufacturing centre based in Manchester, a city with a rich industrial legacy and one of the UK’s biggest technology hubs. We’re home to manufacturing experts, designers, engineers and students on our MSc Digital Design and Manufacturing course. We collaborate with businesses, big or small, to make even the most ambitious ideas a reality.

Pro 3D Shop

www.pro3dshop.com

E39

Pro 3D Shop has been providing 3D printing solutions since 2018, initially focused on Jewellery and expanding to industrial use in 2020. The team, with over 20 years of combined experience, is proficient in all 3D printing technologies. The company takes pride in its ethical approach, ensuring clients’ needs are met by refusing to use or sell unsuitable products. Trustworthy and reliable, Pro 3D Shop is the go-to partner for your 3D printing needs.

Prusa Research by Josef Prusa

www. prusa3d.com

F48

Prusa Research was founded as a one-man startup in 2012 by Josef Prusa, a Czech hobbyist, maker and inventor - and now one of the most famous names in the 3D printing industry.

Now, there are more than 700+ people working in Prusa Research and we ship over 9000 printers worldwide directly from our HQ in Prague every month!

Quickparts Inc

www.quickparts.com

J51

Quickparts offers complete on demand manufacturing services, from 3D printed metal and plastic parts to traditional CNC, sheet metal, injection molding, and cast urethane models. Quickparts empowers designers and engineers with the tools to reduce production times, speed up design iterations, and shorten product development lifecycles with high-quality 3D printed and machined parts from one of our seven global design and production centers.

Networking via the TCT 3Sixty App

Quill Vogue Post Processing

www.quillvogue.com

H41

Is production bottlenecking in post processing? Maybe your printed parts aren’t being cleaned effectively, leading to a poor finish? Or you have issues with support material removal when printing complicated geometries such as blind channels, matrixes and undercuts? Come and visit us on stand H41 to see how quickly and quietly our range of Quill Vogue post processing systems can remove support material from PolyJet, ProJet, FDM, MJF, SLM and SLS printed parts.

R

A Smart

www.rasmartmachinery.co.uk

R A Smart have been at the forefront of large format digital print technology since the early pioneering days of the late 1990’s and can rightly claim to be experts in the supply and support of dedicated digital print solutions, partnering with the leading machine manufacturers we have a large and varied customer base throughout the UK.

Raise3D H19

www.3dgbire.com

Raise3D designs and manufactures topperforming 3D printers and additive manufacturing solutions for SMEs and LSEs. With offices in California, Rotterdam, and Shanghai, Raise3D is an ISO9001:2015- and ISO14001-certified company, positioned to be a leader in developing complete solutions using FFF additive manufacturing technology for polymers, composite, and metal materials.

Rapid News Group

www.rapidnews.com

K39

Operating world class trade shows and publishing magazines all over the world the core function of our business has remained the same.

We connect prospective buyers to companies who have the cutting-edge solutions they need. To make business happen you need a catalyst, a spark of inspiration or simply a place to meet. In print, digital or at live events we create the space for the connections to happen.

Raplas Technologies Ltd

www.raplas.com

E31

Raplas Technologies are a UK Manufacturer offering Large Format, Open Source, Industrial Stereolithography machines.

Whether you are looking for large prototypes or high-volume production, with our best-in-class printers and a wide range of materials we are confident we can meet your application needs.

RAPLAS

- PRODUCTION, PRECISION, PRICE

Revopoint

www.revopoint3d.com

E38

Revopoint focuses on high-precision 3D vision technology innovation. With PhD experts from internationally renowned research institutions, including Xi’an Jiaotong University (XJTU), The Hong Kong Polytechnic University (PolyU), and the Massachusetts Institute of Technology (MIT), amongst others, our creative founding team is at the forefront of innovation in the 3D scanning industry.

Ricoh 3D

www.rapidfab.ricoh-europe.com

Parts printing | Manufacturing Solutions | Personalised Service

Exhibitors A-Z Profile Listings

J42

We have responded to the changing demands of the modern workplace and harnessed over 80 years of manufacturing experience to provide a full range of end-to-end solutions, including additive manufacturing (AM) services and 3D printing.

Connect with us using #Ricoh3D

Roboze 3D Printers

F29 www.matsuura.co.uk

Roboze designs and manufactures the world’s most accurate 3D printers for producing parts with super polymers and composite materials to replace metals in industries with extreme working conditions.

Scott Bader

D19 www.scottbader.com

Scott Bader is an employee-owned global manufacturer of 3D printing resins with headquarters in the UK.

Established in 1921, we have a century of expertise in manufacturing high-quality, innovative products for a variety of markets around the world. Scott Bader now employs 850 people across 7 manufacturing sites and 18 offices worldwide.

Seraph Technologies Ltd/CONSTRUCT3D F51

www.construct-3d.com

Manufacturing the UK’s fastest 3D printers, CONSTRUCT3D bring exceptional speed, reliability and quality to the machines they produce. With smart engineering choices throughout the design, the printers offer an exceptional and intuitive user experience whilst also being fully data secure for use in heavier industries.

Sharmic Engineering Ltd

www.sharmic.co.uk

H58

Sharmic Engineering is an established family company specialising in the surface improvement of components by vibratory finishing techniques. We offer a comprehensive range of both new and used machinery along with extensive stocks of finishing consumables. Our finishing solutions perform operations such as deburring, cleaning and polishing. In addition to supplying machinery we also offer a competitive and efficient component finishing service.

Shenzhen Best Tranding Co.,Ltd

www.iwecolor.com

Believe in color, believe in creation. iWECOLOR is a global brand, a professional 3D printing material supplier, focusing on the development, production, and sales of various types of color 3D printing materials. We provide our customers with stable and high-quality 3D printing materials, such as PLA, PETG, TPU, RESIN, etc. Just like our brand’s colorful caterpillar logo, we work with our customers to turn colorful and rich ideas into a colorful reality!

Networking via the TCT 3Sixty App

Shimadzu B50

www.shimadzu.co.uk

Born from a rich history in engineering, Shimadzu is a leading Japanese company involved in the manufacturing of Precision Analytical Instrumentation. Our quality materials testing solutions include Universal and Fatigue Testing Frames, Micro Hardness Testers, FTIR, UV and EDX Spectrometers, High Speed Video Cameras and Balances. Our analytical and measuring instruments, and industrial machinery are now used for a broad range of applications in a wide variety.

Shining 3D @ CDG Scanners

www.cdg.uk.com

N62

SHINING 3D manufactures an attractive range of 3D Scanners including:-

EinScan Pro HD - for structured light scanning

EinScan H - for colour face and body scanning

EinScan HX - for Laser & LED scanning

FreeScan UE Pro - for Laser scanning with Photogrammetry

FreeScan Combo - For Laser & Infrared

TranScan C - for high resolution colour scanning.

Silverstone Technology Cluster

TCT Connect Lounge

www.silverstonetechnologycluster.com

Silverstone Technology Cluster (STC) is a not-for-profit cluster support organisation for advanced engineering, electronics and software businesses in the wider Silverstone area. As a by-industry, for-industry organisation, we provide our members and cluster companies with networking and promotional opportunities, access to new markets and sectors, match making with collaborative partners and OEM businesses, business growth support and more.

Shining

3D @ 3DGBIRE Ltd

H19 www.3dgbire.com

SHINING 3D is a high-tech enterprise with China National Torch Plan, professional in providing integrated solutions for 3D digitizing technology.

SHINING 3D focuses on 3D digitizing and 3D printing technology, from high precision 3D digitizing (3D scanning), 3D modeling and inspection (reverse design, 3D inspection) to 3D Printing and rapid manufacturing (3D data output).

Silverstone Composites TCT Connect Lounge www.silverstone-composites.co.uk

Silverstone Composites Ltd was founded in May 2016 to provide bespoke composite manufacturing solutions to a variety of trade sectors throughout the UK, including the motorsport, marine, military, automotive, aerospace, track bikes and medical mobility industries. With the relevant knowledge and capabilities to ensure accuracy and precision for each project, Silverstone Composites Ltd is able to assure our clients that each product leaving our facility matches their requirements exactly and is in perfect working order.

Sinterit

N65 www.cdg.com

Sinterit manufacture SLS 3D printers for desktop, floor standing and production solutions. The systems comes with materials such as PA12, PA11, PP, TPU, TPE.

The product line includes:- Lisa Lisa Pro Lisa X Nils 480

Solid Print3D

www.solidprint3d.co.uk

Exhibitors A-Z Profile Listings

A31, B29, L47

The UK’s fastest growing 3D Printing & 3D Scanning specialists.

Solid Print3D supply & support 3D Printers, consumables, 3D Scanners & 3D Software to UK & Ireland businesses.

We offer honest, impartial expert advice & best-in-class solutions, with world class technical support.

Part of the global Solid Solutions Group the largest reseller of SolidWorks products in the UK and one of the biggest SolidWorks partners across the world.

Solukon M28

www.solukon.de/en/solukon-depowdering/

Solukon is a pioneer in depowdering solutions for metal laser-melted parts in the AM industry. Based in Germany, we have extensive experience developing AM systems and peripheral equipment that industry leaders can trust. Together with our Smart Powder Recuperation technology SPR®, our range of depowdering machines delivers reliable, repeatable results and unlocks hidden efficiencies for your business. Choose Solukon today and discover the benefits tomorrow.

Stratasys @ SYS Systems

www.sys-uk.com

H29

SYS Systems is the UK’s dedicated platinum partner to Stratasys, the world’s largest commercial 3D printing brand. Making additive manufacturing accessible to one and all - our mission is to help businesses harness the full power of AM to design, refine, iterate, create and manufacture anything. With over two decades of experience in additive manufacturing, visit today to tour all five leading technologies and find the solution for your biggest challenges.

Solid Solutions

A31, B29, L47 www.solidsolutions.co.uk

Solid Solutions Group is a collection of brands and strategic partnerships dedicated to supporting excellence in the design, engineering, and manufacturing industries. We offer a wide range of manufacturing software, services, and solutions that enable us to help with anything from additive manufacturing and 3D scanning hardware to CAM software and technical assistance.

+441926 333777 sales@solidsolutions.co.uk

Stratasys @ Laser Lines

D51 www.3dprinting.co.uk

Stratasys is trusted to help some of the world’s top companies stay ahead of the competition. From global leaders in aerospace and automotive to pioneering medical startups and giants of the tech world – their proven technologies let them work faster, more creatively and with reduced costs. On top of their industry-leading printers and materials, they also provide decades of knowledge, consulting, training, workflow management and end-to-end support.

Stratasys @

Tri-Tech

3D

E29 www.tritech3d.co.uk

Stratasys has been known to be the leader in Additive Manufacturing for over 30 years. Our proven technologies help businesses work faster, more creatively and with reduced costs across their operations. Working alongside our UK Platinum Partner Tri-Tech 3D we offer the full range of AM solutions including FDM, PolyJet, SAF, P3 and SLA technologies as well as certified Stratasys training from their Stoke-onTrent training hub.

The precision you need with the flexibility you want.

The precision you need with the flexibility you want.

Inkbit’s Vista™ system with Vision-Control Jetting (VCJ) provides the precision and accuracy of traditional machining with the flexibility and versatility of 3D printing.  Uniquely designed to support a broad range of application areas, including robotics, gaskets, fluidics, and drones, the Vista™ offers incredible adaptability and range.  Dimensional accuracy, advanced materials, enhanced throughput, and low-labor post-processing – translates to high-performing products at a lower cost and in less time.

Inkbit’s Vista™ system with Vision-Control Jetting (VCJ) provides the precision and accuracy of traditional machining with the flexibility and versatility of 3D printing.  Uniquely designed to support a broad range of application areas, including robotics, gaskets, fluidics, and drones, the Vista™ offers incredible adaptability and range.  Dimensional accuracy, advanced materials, enhanced throughput, and low-labor post-processing – translates to high-performing products at a lower cost and in less time.

Come see the perfect balance between the accuracy of conventional machining and the flexibility of 3D printing at the Inkbit booth #4846

Come see the perfect balance between the accuracy of conventional machining and the flexibility of 3D printing at the Inkbit booth #4846

Exhibitors A-Z Profile Listings

SuNPe Prototype

www.sunpe.com

M10

SuNPe provides one stop services from prototyping to low volume production, including CNC machining, vacuum casting, 3D printing, sheet metal fabrication, compression (Silicon/ Rubber parts), pressure die casting, customized extrusion and surface finishing.

We work with a wide range industries of automotive parts, medical devices, consumer products and industrial equipment. Provide you with a comprehensive solution from prototyping to production.

Sympatec

Ltd

www.Sympatec.com

J29

Sympatec develops an innovative range of best instruments for particle size and shape analysis. With continuous innovations in the technological fields of laser diffraction, dynamic image analysis, ultrasonic extinction and photon cross-correlation spectroscopy (PCCS). Typical applications cover dry powders and granules, fibres, suspensions, emulsions, gels, sprays and inhalants within a size range from 1 nm to 30,720 µm.

SYS Systems

www.sys-uk.com

H29

SYS Systems is the UK’s dedicated platinum partner to Stratasys, the world’s largest commercial 3D printing brand. Making additive manufacturing accessible to one and all - our mission is to help businesses harness the full power of AM to design, refine, iterate, create and manufacture anything. With over two decades of experience in additive manufacturing, visit today to tour all five leading technologies and find the solution for your biggest challenges.

Technology Outlet

www.technologyoutlet.co.uk

We are Technology Outlet! The Technology Outlet team strive to have the best Customer service, 3D printing knowledge and technical support in the UK. With a spectrum of possibilities in 3D printing, software, and scanning. Our aims are to guide, educate and overall make sure you have the best experience launching in to this new field.

The 3D Measurement Company Ltd

www.t3dmc.com

D48

The 3D Measurement Company Ltd is a leading provider of 3D engineering solutions centred on 3D scanning technology. We specialise in using full surface 3D data for inspection, design, adaptive machining and simulation. We pride ourselves on delivering customised solutions to some of the UK’s leading automotive, aerospace, power generation and general manufacturing companies.

The CREATE Education Project H89

Inspired Minds Classroom

www.createeducation.com

CREATE Education are committed to supporting educators, educational institutions, outreach and community programmes to embed 3D printing and 3D technologies for STEAM in education.

Networking via the TCT 3Sixty App

The Digital Manufacturing Centre

TCT

Connect Lounge

www.digitalmanufacturingcentre.com

The Digital Manufacturing Centre (DMC) is an industry-defining production facility and innovation hub, located at the world-renowned Silverstone Park. With a solution-led philosophy, we are realising the disruptive potential of additive manufacturing. Our engineering team harnesses state-of-the-art AM, in combination with machining and inspection to provide a truly unique solution. Dedicated to delivering exceptional quality, we supply end-use ready components for industrydefining projects across the space, aerospace, defence, motorsport, automotive, industrial, marine and medical sectors.

Triditive

www.triditive.com

L29

Triditive specialise in providing Automation solutions for Production Additive Manufacturing systems. Triditive have their own range of Filament and metal binder Jetting technologies, but other makes and brands of Additive manufacturing equipment such as SLS,SLS,DLP and FDM can be optimised for production.

TCT Group

www.thetctgroup.com

TCT Group, has been a leading authority in additive manufacturing, 3D printing, design and engineering technology for 30 years. A rich mix of live events and all-encompassing media portfolio enables TCT to deliver business critical intelligence, connecting the additive community across Europe, North America and Asia.

TRUMPF H49

www.trumpf.com/en_GB/

As a pioneer in additive technologies and a laser specialist since 1979, we offer the right technology for every metallic application requirement: Laser Metal Fusion (powder bed based laser fusion) or (Laser) Powder Bed Fusion (PBF/LPBF) or Laser Metal Deposition (generative laser deposition welding).

Tri-Tech 3D

www.tritech3d.co.uk

E29

Tri-Tech 3D are the UK and Irelands leading supplier of Stratasys, One Click Metal & XJet professional 3D printers. We don’t just offer the printers, but we encompass a 360 approach by enabling our customers to get more out of their machines by offering consultancy, application led AM training and some of the highest rated engineering technical support in the UK.

Turbex Ltd

www.turbex.co.uk

M28

Turbex has supplied the right component cleaning solution to a wide range of industries for over 40 years.

Working closely with the UK’s most prestigious businesses, Turbex provides a bespoke service to ensure an optimal, repeatable clean every time. Our broad church of technologies includes spray washing, ultrasonic cleaning, solvent cleaning, surface treatment and depowdering.

Discover how our expert team and solutions can support your business today.

Ulendo Technologies, Inc.

www.ulendo.io

Exhibitors A-Z Profile Listings

C4

Ulendo’s flagship product, Ulendo VC, has been selected as a finalist in the 2023 TCT Awards. Based on mechatronics research conducted at the University of Michigan, Ulendo VC is vibration compensation software that DOUBLES the throughput of extrusion-based 3D printers without sacrificing quality. The software is integrated with the 3D printer’s firmware on the controller and does not require additional devices such as an accelerometer or Raspberry Pi.

Ultimaker @ Additive-X

F31 www.additive-x.com

Professional, easy-to-use filament-based 3D printers with access to a wide-range of materials. Additive-X are a  Certified UK 3D Printer Partner for Ultimaker. The UltiMaker S7 Pro Bundle adds the Material Station to their newest S series 3D printer, transforming it into a manufacturing powerhouse. This one-of-a-kind upgrade further simplifies the 3D printing workflow with automatic switching of up to 6 spools.

Ultimaker @ 3DGBIRE Ltd

H19 www.3dgbire.com

Driven by technology and passionate about innovation, Ultimaker offers a range of highquality 3D printers, software, materials, and support. Ultimaker’s 3D printers use Fused Filament Fabrication (FFF) technology, which involves melting plastic filament and extruding it layer by layer to create 3D objects. Ultimaker offers a range of printers with varying capabilities, from the compact Ultimaker 2 Go to the larger Ultimaker S7 Pro Bundle.

Ultimaker @ PLG Engineering

Established in 2011, Ultimaker is on a mission to accelerate the world’s transformation to flexible, empowering and sustainable solutions. 380 employees deliver a platform that enables customers to take full advantage of the unique Ultimaker Ecosystem that offers the largest diversity of 3D printing products and services in the industry. Ultimaker provides a seamless integration of hardware, software and materials that simply works.

University of BoltonCentre for Advanced Manufacturing

www.bolton.ac.uk

A38

From research, development, and manufacturing to training, testing and recruitment, the Centre for Advanced Manufacturing provides exceptional support to engineering companies across the UK.

Through our unique approach to collaborative projects, we’re helping our partners reduce the costs of accessing technology, secure additional funding, and develop engineering workforces that provide the backbone of the UK’s engineering industry.

Verder Scientific UK H1

From oven & furnace heat treatment solutions to milling, sieving, elemental analysis and particle characterisation our Carbolite Gero, Retsch, Eltra and Microtrac MRB brands are globally recognised for their quality and affordability. Find out more from our team during the 2023 event.

Networking via the TCT 3Sixty App

Virgis Filter Sales & Marketing Ltd

www.virgisfilter.uk

Virgis Filter Sales & Marketing Ltd was established in July 2003 as the UK & Ireland distributor for Virgis air filter products. We provide technical support & distribute from our UK warehouse in Wetherby.

We can offer 3D printer Manufacturers a Tailor Made Solution for their air filters, providing option like carbon Impregnated media, honey comb carbon blocks, HEPA, ULPA & EPA air filter media, which can be placed in a custom housing unit.

voxeljet

voxeljet is a leading provider of high-speed, large-format Binder Jetting 3D printers and on-demand parts services to industrial and commercial customers. The company’s 3D printers produce parts using various materials, such as sand, ceramics and polymers. 3D printers and printed parts from voxeljet find application in automotive, aerospace, film and entertainment, art and architecture, engineering, and consumer product end markets.

WAAM3D B38

www.waam3d.com

WAAM3D is the only provider of a total, turnkey solution delivered via a WAAM ecosystem that is based on in-house developed hardware, software, services, and materials. By pushing the boundaries of WAAM capabilities, WAAM3D is helping those in aerospace, oil and gas, mining, and other industrial applications to have increased design freedom, reduce costs and shorten lead times of a range of medium-tolarge sized components.

Boasting a combined 150+ years of industrial electron beam manufacturing expertise. Born out of a high precision engineering team with a long and distinguished pedigree in the semiconductor industry, where electron beam widths are measured in nanometers and process instabilities are unacceptable. The use of and experience with eBeam technology in semiconductor manufacturing indicated that its use in additive manufacturing could be improved.

Wematter N49

www.cdg.uk.com

Wematter Gravity is a groundbreaking and easy-to-use SLS 3D printing platform for additive manufacturing. With a 300mm cubed build volume, high quality parts and a unique process for clean SLS manufacturing, the choice of materials include PA6, PA11, PA12, PP, ESD Safe, Food Grade and Flame Retardant. No other SLS printer manufacturer does what the WeMatter solution can do!

Xact Metal

At Xact Metal™, we’re taking the essential specs for metal 3d printing and combining them with breakthrough technology to establish a new level of price and performance for additive manufacturing. We’re dedicated to supporting the next generation of innovative engineering solutions powered by metal powder-bed fusion printing technology.

Exhibitors A-Z Profile Listings

XJet 3D E29

www.tritech3d.co.uk

XJet 3D provides industry-leading high definition Ceramic 3D printing solutions that empower companies to create revolutionary products in ceramics and metals. Manufacturers can now enjoy volume production of true geometric complexities, unlocking a host of applications that have so far been unviable.

ZEISS D30

www.zeiss.co.uk

ZEISS are a leading manufacturer of multidimensional metrology solutions including coordinate measuring machines, optical and multi-sensor systems and metrology software for the automotive, aircraft, mechanical engineering, plastics and medical technology industries. ZEISS Industrial Metrology UK is helping lead the way in providing complete solutions for multidimensional metrology.

SUBJECT TO CHANGE.

To view the latest information please download App from Apple & Google stores

Zaxe 3D Printers

L45 www.zaxe.com/en/en

The new series of Zaxe 3D Printers are designed as a perfect additive manufacturing solution with their innovative features and fast mechanics.

Zeiss @ 3DGBIRE Ltd

H19 www.3dgbire.com

GOM Metrology, a company of the ZEISS Group, specializes in industrial 3D coordinate measuring technology, 3D computed tomography and 3D testing.

Evaluation. Adoption. Optimisation.

The UK’s premier showcase of additive manufacturing and 3D printing technology.

An event focused on developing real understanding at all levels of UK industry of the potential of additive manufacturing and 3D printing.

The best way to put your business in front of one of the fastest growing additive manufacturing markets in the world.