OptiTemp TEMPERATURE REGISTRATION AND GPS POSITIONING SYSTEMS
optitemp // Monitor the quality of your transportation THROUGH OptiTemp and OptiWeb systems Lumikko OptiTemp temperature registration devices are designed for the registration, monitoring and alarm indication of the temperature in food and animal transportation, as well as in refrigeration and freezer spaces.
MORE THAN JUST A TEMPERATURE REGISTRATION DEVICE The memory capacity of OptiTemp devices and the option for six temperature measurement points guarantee precise temperature registration during transportation and storage and the ability to view historical data. If required, moisture sensors can also be used. OptiTemp can also be combined with the Lumikko temperature control unit, allowing the status of the temperature control unit to be monitored
transferred over the GPRS network to our server, from
remotely through a Web service.
where it is available on a vehicle-specific basis through the Internet. The web service also allows the location of
ONLINE MONITORING
vehicles to be monitored using the GPS unit integrated into the temperature registration device.
The Web service makes it easier to monitor temperatures during transportation and storage. Existing
Using the positioning system, it is possible to monitor the
OptiTemp IV/III/MX1 devices can be connected to the
location of vehicles and trailers or cargo spaces in real-time,
service. The system allows temperature data to be
and to create route reports afterwards.
EASY TO USE
REPORTING STATUS DATA
VEHICLE-SPECIFIC DATA
The web service is very easy to acti-
Loading, unloading, idle and driving
Vehicle-specific
vate, without any additional software
times can be reported using door
defined by the customer is created in
or settings needing to be installed on
switches or by creating points of inter-
the system. This data serves to iden-
the customer’s computer. The service is
est (POI) in terminal areas. This makes
tify each vehicle or cargo space. The
used with a Web browser. The position-
vehicle route planning easier and im-
visibility of single device data can be
ing service uses Google Maps.
proves efficiency.
limited using personal user IDs.
identification
data
Graphic temperature history
Route history of the vehicle
Numeric operation history
INFORMATION AVAILABLE THROUGH THE BASIC SERVICE
INFORMATION AVAILABLE THROUGH THE ADDITIONAL GPS SERVICE
COMBINED WITH THE CONTROL SYSTEM OF THE LUMIKKO TEMPERATURE CONTROL UNIT
• Real-time temperature data
• Real-time vehicle positions
• Refrigeration unit maintenance
• Temperature data history
• Route history
• Device alarms
• Vehicle speeds
• Error alarms
• Temperature alarms
• Stoppage/driving times
• Thermostat settings
interval alarms
• Status data for door and limit switches
• Maintenance history • Defrosting periods
// WEB SYSTEM The Web service continuously monitors the connection and the condition of the temperature registration device. If no connection can be established to the device within a pre-
GPSpositioning
defined time or if there is a connection fault, the system
OptiTemp IV (+ LC II) OptiTemp MX1 + LCII
will send an automatic error message to a selected e-mail
OptiTemp IV
address. This guarantees that the temperature is always monitored.
// MAINTENANCE MANAGEMENT MONITORING ALSO FOR THE TEMPERATURE CONTROL UNIT iGPRS
New OptiTemp IV and MX devices can be connected to the control system of Lumikko temperature control units, in which case data from the temperature control unit can be transferred to the Web service. The Web service makes it possible to monitor the thermostat settings and send alarms from the temperature control unit and maintenance reminders to a selected e-mail address. The service guarantees that the device is maintained at the correct time and allows the operability of the device to be monitored.
Internetconnection
OptiWeb -server
// Technical specifications OPTITEMP IV Operating voltage:
10–32 VDC
Power consumption:
Norm. 0.6 W, max. 25 W (printing)
Operating temperatures:
-40 – +70 °C
Memory:
> 1 year with six sensors at a measurement interval of 15 minutes
Measurement interval:
1–60 minutes
Sensors:
1–6 pcs (-40 – +50 °C)
Inputs:
4 × status data (e.g. door switch)
Outputs:
1 × alarm output (grounded)
Data transfer:
1 × infrared RS-232 in the front panel
2 × internal RS-232 (GRPS, GPS, Bluetooth)
1 × CAN bus
IP class:
IP22 for trucks
IP65 for trailers Languages:
12 different languages (Finnish by default)
Dimensions:
Trailer model: 245 mm × 202 mm × 110 mm
Truck model: 188 mm × 58 mm × 145 mm
Display: Yes Thermal printer:
Yes
Keyboard:
Yes
Approvals:
EN12830 T B C1 approved
Evira approval number:
7495/0960/2008
Lumikko Technologies Oy Postal address: P.O.Box 304 // 60101 Seinäjoki // Finland Visitor address: Kylmätie 1 // 60510, Hyllykallio Seinäjoki // Finland Tel +358 (0) 10 835 54 50 // Fax +358 (0) 6 414 1921 lumikko@lumikko.com // www.lumikko.com