IGNITION & ELECTRONICS DYNA DRL-400 (Two Stage Rev Limiter)
BILLET ALUMINUM IGNITION ROTOR
The Dyna DRL-400 Two Stage Rev Limiter has been specifically designed to maximize launch performance and over-rev protection in drag racing. The DRL-400 works with all inductive electronic ignitions on two and 4-cylinder engines. It is housed in a 3-3/4" x 2-3/8" x 1" plastic case with integral mounting flanges. DRL-400 Features: - Accurate launch limiting with 32 different settings - Smooth, non destructive launch limiting - Adjustable high limit between 16 different settings
Designed by George Bryce of Star Racing, replaces the stock advancer unit on early model Suzuki GS1100/1150 and Kawasaki KZ900/1000 models. Stock advancers tend to break apart at high RPM. This aluminum rotor is a solid 1-piece unit that will not come apart. It weighs less than stock, and also has a degree wheel marked with timing settings. For use with a Dyna “S” electronic ignition.
35-04815
Dyna billet timing rotors allow simple replacement of the mechanical advancer and ignition rotor with an attractive one-piece anodized rotor. The Dyna billet rotor is laser etched with accurate timing marks to make ignition set up a breeze. For use with the Dyna 4000 ignition.
Adjustable two-stage rev limiter
DYNA DRL-300 REV LIMITER Potential uses include shift kill to kill ignitions during up shift, allowing for clutchless shifts. Instead of having to cut jumper wires to get the box to work with a particular application, and having only two choices, there are now three dip switches. These dip switches allow not only for a very wide range of applications (single fire thumpers to Harleys to inline 4s to 8 cylinders), but they also allow for the rev range to be adjusted from the standard 600012000. This means that new motorcycles with 12000+ RPM redlines can now be handled, as can applications where the limit needs to be set below 6000. DRL-300 Features: - Continuously adjustable from 6,000 to 12,000 RPM - Helps prevent engine failure - Pre-wired and easy to install 35-04804
Dyna rev limiter
DYNA 4000 IGNITION ROTOR Standard replacement rotor for Dyna 4000 ignitions. 35-04828 35-04829
20
Suz P6 4000 rotor Kaw P3 4000 rotor
www.StarRacing.com
35-18900S 35-18900K
Suzuki GS billet ignition rotor Kawasaki KZ billet ignition rotor
DYNA BILLLET TIMING ROTORS
35-048295 35-048296
Suzuki 4000 rotor Kawasaki 4000 rotor
DYNA IGNITION COILS Dyna ignition coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dyna coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dyna coils work with factory electronic ignitions, points, and aftermarket ignitions. 35-04800 35-04801 35-04802 35-04802-1 35-04803 35-048035
Dyna 4000 Pro Coil 12V 2.2 Ohm coils – pair (grey) 12V 3.0 Ohm coils – pair (green) 12V 3.0 Ohm single output – pr (green) 12V 1.5 Ohm coils – pair (red) 12V 0.7 Ohm coils – pair (blue)
800-841-STAR