Strojniški vestnik - Journal of Mechanical Engineering 59(2013)7-8, 425-432
tool for endoprosthesis revision surgery - An in vitro study on human bone and bone cement. Bio-Medical Materials and Engineering, vol. 13, no. 4, p. 317-325. [10] Honl, M., Schwieger, K., Carrero, V., Rentzsch, R., Dierk, O., Dries, S., Pude, F., Bluhm, A., Hille, E., Louis, H.E., Morlock, M., (2003). The pulsed water jet for selective removal of bone cement during revision arthroplasty. Biomedizinische Technik, vol. 48, no. 10, p. 275-280, DOI:10.1515/bmte.2003.48.10.275. [11] Schwieger, K., Carrero, V., Rentzsch, R., Becker, A., Bishop, C., Hille, E., Louis, H., Morlock, M., Honl, M. (2004). Abrasive water jet cutting as a new procedure for cutting cancellous bone - In vitro testing in comparison with the oscillating saw. Journal of Biomedical Materials Research Part B-Applied Biomaterials, vol. 71B, no. 2, p. 223-228, DOI:10.1002/ jbm.b.10078. [12] Bach, F.-W., Biskup, C., Kremer, G., Schmolke, S. (2007). Investigation of the AWIJ-drilling process in cortical bone. Proceedings of the 2007 American WJTA Conference and Expo, 1-D. [13] Hloch, S., Valicek, J., Kozak, D. (2011). Preliminary Results of experimental cutting of porcine bones by abrasive waterjet. Tehnički Vjesnik-Technical Gazette, vol. 18, no. 3, p. 467-470. [14] Honl, M., Rentzsch, R., Lampe, F., Muller, V., Dierk, O., Hille, E., Louis, H., Morlock, M., (2000). Water jet cutting of bone and bone cement. A study of the possibilities and limitations of a new technique. Biomedizinische Technik, vol. 45, no. 9, p. 222-227, DOI:10.1515/bmte.2000.45.9.222. [15] Kuhlmann, C., Pude, F., Bishup, C., Krömer, S., Kirsch, L., Andreae, A., Wacker, K., Schmolke, S., (2005). Evaluation of potential risks of abrasive water jet osteotomy in-vivo. Biomedizinische Technik. Biomedical engineering, vol. 50, no. 10, p. 337, DOI:10.1515/BMT.2005.047. [16] Steadman, J.R., Rodkey, W.G., Rodrigo, J.J. (2001). Microfracture: surgical technique and rehabilitation to treat chondral defects. Clinical Orthopaedics and Related Research, vol. 391, p. S362-369, DOI:10.1097/00003086-200110001-00033. [17] Asnis, S.E., Kyle, R.F. (1996). Cannulated Screw Fixation: Principles and Operative Techniques. Springer, New York, DOI:10.1007/978-1-4612-2326-9. [18] Orbanic, H., Junkar, M. (2004). An experimental study of drilling small and deep blind holes with an abrasive water jet. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 218, no. 5, p. 503-508, DOI:10.1177/095440540421800504. [19] Ohlsson, L., Ivarson, A., Magnusson, C., Powell, J. (1992). Optimisation of the piercing or drilling mechanism of abrasive water jets. Fluid Mechanics and Its Applications, vol. 13, p. 359-370, DOI:10.1007/97894-011-2678-6_24. [20] Leach, S., Walker, G. (1966). The application of high speed liquid jets to cutting. Philosophical Transactions
of the Royal Society of London,vol. 260A, no. 1110, p. 295-308. [21] Hashish, M. (1989). An investigation of milling with abrasive-waterjets. Journal of Engineering for Industry-Transactions of the ASME, vol. 111, no. 2, p. 158-166, DOI:10.1115/1.3188745. [22] Momber, A.W., Kovacevic, R. (1998). Principles of Abrasive Water Jet Machining. Springer, London, DOI:10.1007/978-1-4471-1572-4. [23] An, Y.H., Draughn, R.A. (2000). Mechanical Testing of Bone and the Bone-Implant Interface. CRC Press, Boca Raton. [24] Kempson, G.E. (1982). Relationship between the tensile properties of articular cartilage from the human knee and age. Annals of Rheumatic Disseases, vol. 41, no. 5, p. 508-511, DOI:10.1136/ard.41.5.508. [25] Reilly, D.T., Burstein, A.H. (1975). The elastic and ultimate properties of compact bone tissue. Journal of Biomechanics, vol. 8, no. 6, p. 393-405, DOI:10.1016/0021-9290(75)90075-5. [26] Burstein, A.H., Reilly, D.T., Martens, M. (1976). Aging of bone tissue: mechanical properties. Journal of Bone and Joint Surgery-American Volume, vol. 58, no. 1, p. 82-86. [27] Kuhn, J.L., Goldstein, S.A., Ciarelli, M.J., Matthews, L.S. (1989). The limitations of canine trabecular bone as a model for human: A biomechanical study. Journal of Biomechanics, vol. 22, no. 2, p. 95-107, DOI:10.1016/0021-9290(89)90032-8. [28] Odgaard, A., Hvid, I., Linde, F. (1989). Compressive axial strain distributions in cancellous bone specimens. Journal of Biomechanics, vol. 22, no. 8-9, p. 829-35, DOI:10.1016/0021-9290(89)90066-3. [29] Athanasiou, K.A., Rosenwasser, M.P., Buckwalter, J.A., Malinin, T.I., Mow, V.C. (1991). Interspecies Comparisons of Insitu Intrinsic Mechanical-Properties of Distal Femoral Cartilage. Journal of Orthopaedic Research, vol. 9, no. 3, p. 330-340, DOI:10.1002/ jor.1100090304. [30] Lane, J.G., Massie, J.B., Ball, S.T., Amiel, M.E., Chen, A.C., Bae, W.C., Sah, R.L., Amiel, D. (2004). Follow-up of osteochondral plug transfers in a goat model: A 6-month study. The American Journal of Sports Medicine, vol. 32, no. 6, p. 1440-50, DOI:10.1177/0363546504263945. [31] Newman, E., Turner, A.S., Wark, J.D. (1995). The potential of sheep for the study of osteopenia: current status and comparison with other animal models. Bone, vol. 16, no. 4, suppl. p. 277S-284S. [32] Teo, J.C.M., Si-Hoe, K.M., Keh, J.E.L., Teoh, S.H. (2007). Correlation of cancellous bone microarchitectural parameters from microCT to CT number and bone mechanical properties. Materials Science and Engineering: C, vol. 27, no. 2, p. 333-339, DOI:10.1016/j.msec.2006.05.003. [33] Siu, W., Qin, L., Cheung, W.H., Leung, K. (2004). A study of trabecular bones in ovariectomized goats with micro-computed tomography and peripheral
Pure Waterjet Drilling of Articular Bone: An in vitro Feasibility Study
431