S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Sensepoint XCD Transmitter with Sensor Flammable, toxic and oxygen gas detectors 3 wire (sink/source) 4-20 mA output + relays Modbus RS-485 / RTU Replaces Sensepoint Pro and other 3 wire 4-20 mA Non Intrusive 1 man operation Magnetic switches Plug in Catalytic, IR and ECC sensors Common transmitter platform Simplified and reduced cost of installation Reduced training time and cost Less chance of incorrectly configuring/interpreting/readings/messages Reduced maintenance spares stock and cost Tri-colour backlit LCD for status indication Hazardous area certified UL, CSA, cUL, Inmetro and ATEX Flameproof transmitter (LM25 or 316 SS)
Sensepoint XCD RFD (Remote Flammable Detector) Sensepoint XCD RFD (Remote Flammable Detector) has been specifically designed for use with remotely mounted flammable gas sensors. This configuration is ideal for applications where the sensor is required to be mounted remotely from the transmitter in areas where temperatures are well above ambient (up to 150°C/302°F), or that are difficult to access. The transmitter can be mounted at a suitable location away from this area where it is easy to access, view its display and interact with via the user interface. Sensepoint XCD RFD is suitable for use with several Honeywell Analytics’ sensors; the Sensepoint XCD catalytic bead and infrared type plug-in sensors and the Sensepoint standard and high temperature sensors. These sensors can be mounted up to 30 metres (100 feet) away from the transmitter thereby accommodating even the most remote and inaccessible applications. The gas range is user adjustable at the transmitter from 0-100%LEL down to 0-20%LEL.
Sensepoint XCD RTD (Remote Toxic Detector) Sensepoint XCD RTD (Remote Toxic Detector) has been specifically designed for use with the Honeywell Analytics' range of Sensepoint toxic and Oxygen sensors. This configuration is ideal for a wide range of toxic and Oxygen gas detection applications. The sensor can be mounted up to 30 metres (100 feet) away from the transmitter in areas that are difficult to access. The transmitter can be mounted at a suitable location away from this area where it is easy to access, view its display and interact with via the user interface. where it is easy to access, view its display and interact with via the user interface. Sensepoint toxic and Oxygen sensors offer a wide variety of gases and measuring ranges. The sensor can be mounted directly to the transmitter as well as remotely. Sensepoint XCD RTD can be used as a common platform for all toxic and Oxygen gas detection, reducing spares requirements. The Sensepoint sensor design includes an IS portion with a removable sensor cartridge, eliminating the need for a hot work permit when changing the sensor cartridge. The sensor has an IP67 rating for use in the harshest conditions. www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Series 3000 MkII Transmitter with Sensor Gas detector 2 wire 4-20 mA Output Replaces Sieger Series 2,000 (non IS) and other 2 wire 4-20 mA toxic gas detectors Pre calibrated sensors for : O2, H2S, CO, SO2, NH3, HCL, HCN*, HF, CL, CLO, O3*, NO, H, PH , NO2 SurecellTM sensors ReflexTM sensor diagnostics Hazardous area certified UL, CSA, cUL, INMETRO and ATEX IS sensor connection giving ‘Hot Swap’ capability Markets Petrochemical, chemical, manufacturing, industrial and utilities * Check with HA for availability
XNX Universal Transmitter A universal transmitter compatible with all Honeywell Analytics gas sensor technologies. Universal transmitter platform Use with all HA sensing technologies Catalytic Bead, Electrochemical & Infrared Compatible with entire installed base Sensepoint (inc. HT & ppm), Optima Plus and Excel Common IS sensor with Series 3000 Flexible configuration Modular design for ‘future proofing’ 3 or 4 wire sink, source or isolated 4-20 mA HART® output as standard Options include Relays, local HART® port, Foundation Fieldbus™ or Modbus® outputs Meets latest standards IECEX + ATEX Performance EN61779/EN50402 Serviceable conventional technology MPD IR Slug/Catalytic Bead S3K IS Sensor for ECC
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Apex Transmitter with Sensor Highest performance fixed flammable and toxic gas detector with a choice of communication outputs, accessories and installation flexibility. Apex takes the best elements of gas detection design and combines them into one unit. It provides the highest performance, installation flexibility, a wide range of accessories and a choice of communication outputs. All this is provided in a package that is easy to install, operate and maintain.
Searchpoint Optima Plus Point Infrared Gas Detector Market leading point infrared flammable gas detector offering unrivalled performance and sensitivity • Increased false alarm rejection with 42 SOFTWARE™ • Increased uptime with contaminated optics warning • Dynamic Heating Control ensures condensation free optics • No undetected failures • Improved diagnostics • Integral event logging • Reduced power consumption • Certified to many hazardous area classification schemes including : European (ATEX), UL, CSA and more
Searchline Excel Open Path Infrared Gas Detector Searchline Excel is totally immune to interference from sunlight or any other sources of radiation such as flare stacks, arc welding or lightning. Searchline Excel employs a patented double band pass filter that fully compensates for all types of fog and/or rain, thereby allowing it to continue to operate accurately and reliably in all climatic conditions. • Searchline Excel is a hazardous area certified flammable infrared open path gas detector • Searchline Excel comprises of a Transmitter and Receiver that are mounted at each end of the path to be monitored • Three versions are available : Short Range (5-40 m), Medium Range (40-120 m) and Long Range (120-200 m) • Receiver output is 3 wire 4-20 mA selectable sink or source • Standard calibration is Methane
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Signalpoint Pro Toxic Gas Detector The Signalpoint Pro range of toxic and Oxygen gas detectors with integral display offers a low cost solution to outdoor gas monitoring Intrinsically Safe gas detector -2 wire 4-20 mA Output • Replaces Sieger Series 2000 (IS) and other 2 wire 4-20 mA toxic gas detectors Smart sensors for : • O2 , H2S, CO, SO2, NH3 • NO2 and H2 Hazardous area certified • ATEX, UL, CSA (cUL) (Not IECEx) • Intrinsically Safe (IS) design • ‘Hot Swap’ sensor cartridge exchange capability Markets • Industrial, Light Industrial, Manufacturing, Utilities, Pharmaceutical, Chemical and Petrochemical
Signalpoint Flammable and Toxic Gas Detector The Signalpoint range of flammable, toxic and Oxygen gas detectors offers a low cost solution to indoor gas monitoring. Supplied with an integral pre-wired junction Ingress protection IP54 • Indoor use only Integral junction box • Non threaded cable entry • No need for ceiling bracket Combustible (0-100% LEL) • ATEX II 2G EEx ed IIC T4 -30 to +40°C • Performance to EN50054 • Disposable sensor (typical 5 year life) Toxic (H2S, CO, Cl2, NH3) and Oxygen (O2 ) • Non certified (performance to EN45544 for H2S) • Integral status/alarm LED • Replaceable sensor (typical 2 year life)
Sensepoint Flammable and Toxic Gas Detector ATEX certified flammable, toxic and Oxygen gas detectors offering a low cost solution to hazardous area monitoring • SurecellTM electrochemical sensors • Poison resistant catalytic bead • Fast and reliable • Typical 2 to 5 years operational life • Complies with the latest standards • Hazardous area approval and performance • IP65/67 for use in harsh environments
Sensepoint HT Sensor The Sensepoint high temperature sensor has been specifically designed for the detection of combustible gases in high temperature hazardous area locations. Typical applications include turbine enclosures and drying ovens used in solvent based printing and coating machines. • • • • •
Certified for hazardous area operation up to +150°C (+302°F) Alarm trip points as low as 5% LEL Fast speed of response Poison resistant detectors Low power consumption www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
System 57 Controller System 57 accepts inputs from flammable and toxic gas detectors, a large range of flame, smoke and heat detectors and manual call points. Available outputs include relays, analogue signals and industry standard digital protocols. Packaged in either wall mounting cabinets or panel mounting racks, System 57 can be used stand alone or integrated into the heart of a fire and gas system. • High precision, intelligent control • Master/voted alarm options • High packing density • Flexible I/O configuration • Relay output options
Touchpoint 1 Controller The Touchpoint 1 Controller when used with any one of the Sensepoint range of gas detectors provides 24 hour protection from flammable, toxic or Oxygen gas hazards. With executive outputs to shutdown process equipment or drive warning devices, the Touchpoint 1 is ideal for continuous monitoring of small remote sites where it is inappropriate or costly to monitor the area from a central location. AC and/or DC driven, the Touchpoint 1 includes built-in audiovisual alarms, two programmable alarm relays and a system fault relay as well as an isolated 4-20 mA output proportional to the input from the field device. The system is fully user programmable via the ultra-clear backlit LCD and intuitive menu system. For example, relays may be configured as ‘non-atching’ (default is ‘latching’) so that outputs clear automatically on remote unmanned sites. Buttons used for configuration are hidden behind an access panel to prevent tampering. A single button is available to all users on the front of the controller to perform a simple self-test or to reset alarms if needed.
Touchpoint 4 Controller The Touchpoint 4 controller provides protection of personnel and plant from flammable, toxic and Oxygen gas hazards when used with up to four Sensepoint gas detectors. Self-contained, fully user configurable and wall mounted, a Touchpoint 4 gas detection system can monitor gas hazards in a large area or several discrete locations from a convenient central site. Input modules are available for use with 4-20 mA and mV type gas detectors. Each channel includes a backlit display detailing gas type, measuring range, actual gas reading in both numeric and bar graph format as well as alarm status. Two user programmable alarm relays and a repeated 4 -20 mA signal proportional to the gas level monitored are included per channel.
Unipoint Controller Two versions of Unipoint are available; one for mV bridge, catalytic bead type, flammable gas detector and the other for any 2 or 3 wire 4-20 mA type gas detector. Each Unipoint is easily installed onto the DIN rail via a special socket (provided) that also interconnects power to adjacent units. With removable terminal connectors, individual Unipoint controllers can be easily changed without disturbing other devices. • Ultra-clear backlit display • System status codes • Built-in audiovisual alarms • Intuitive menu system • Simple pushbutton operation • Remote accept, reset and inhibit inputs www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
UPS II Smart Loop Calibrator for Milliamps • Sources and reads milliamps • Powers and reads 2-wire transmitters • Reads and simulates DP transmitters in % of flow • Auto-ramp cycling for endurance tests • Auto-stepping for hands-free calibration • Fixed calibration currents • Fixed currents for valve stroking
UPS III Loop Calibrator • Measure or Source 0 to 24 mA • Accuracy ±0.01% of reading • Dual mA and % readout, linear or flow • Step, Span Check, Valve Check and Ramp • 6 VDC measurement and continuity • HART® compatible
UPS III IS Intrinsically Safe Loop Calibrator • Adjustable resolution & display contras • Uses industry standard AA batteries • Battery voltage and battery low indicator • Information screen reports serial number, software version and calibration date • Primary reading in mA or % • Auto power off (enable or disable) • Pin protected, closed case calibration • Leather case with carry strap (Note : the UPS III IS must m be used in the case for hazardous area use)
IDT 600 Dirt Moisture Trap • IDT 600-1 : 1/8 dirt moisture trap with BSP connections • IDT 600-2 : 1/8 dirt moisture trap with NPT connections • The system should not be pressurized above 500 psig (35 bar) • Gases compatible with stainless steel, acrylic and nitrile o-ring seals
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
PV 210 Low Pressure Pneumatic Hand Pump • Dual source of pneumatic pressure and vacuum • Generate vacuum to 90% • Generate pressure to 3,000 mbar • Adjustable pressure relief valve for setting maximum output pressure • Integral fine control and pressure release valve • Lightweight, handheld and easy to use
PV 211 Pneumatic Pressure and Vacuum Pump • Dual source of pneumatic pressure and vacuum • Pneumatic pressure in excess 600 psi (40 bar) • Generates vacuum to 28.5 inHg • Adjustable stroke Built-in fine adjust Vernier • Needle valve for controlled pressure release
PV 212 Hydraulic Hand Pump • Hydraulic pressure up to 1,000 bar • Compatible with many different liquids • Large transparent 100 cc capacity reservoir • Quick priming and pressure generation using scissor action pump • Controlled pressure release and adjustment • High pressure/priming selector
PV 411 Four-in-One Hand Pump • Multi-function “4 In 1” handpump • Pneumatic pressures to 600 psi (40 bar) • Hydraulic pressures to 10,000 psi (700 bar) • Generates vacuum to -28.5 inHg • Vacuum priming for hydraulic systems • Excellent low pressure control • Adjustable overpressure protection
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
DPI 104 Digital Test Gauge • ±0.05% full scale (FS) accuracy • Pressure ranges to 20,000 psi (1,400 bar) • Eleven selectable pressure units • Large, easy-to-read display with five-digit resolution • % pressure indication and additional bar graph for quick visual reference • Temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C) 0 to 5 V analog output • Pressure switch test • Minimum/maximum, tare and alarm functions • IDOS compatible and RS232 serial interface • Networking capability (1 to 99 units) • Stainless steel or Inconel pressure cavity for aggressive media
DPI 705 Handheld Pressure Indicators • Ranges 0 to 1 psi through to 10,000 psi (0 to 70 mbar through to 700 bar) • ± 0.1% full scale (FS) accuracy • Rugged, lightweight handheld design • Leak test, tare, max/min and filter • Intrinsically safe version • Standard ranges available from stock • Optional pneumatic and hydraulic hand pumps
DPI 800/802 Pressure Indicator/Loop Calibrator • Range from 10 inH2O to 10,000 psi (25 mbar to 700 bar) • Single or dual range configuration • IDOS pressure sensors provide accuracies to ±0.05% FS all-inclusive or ±0.01% precision • mA measuring switch test and 24 V loop power • Large backlit display, menu driven interface • HART loop resistor • Robust and weatherproof • Compact simple to use, easy to carry • Convenient, one-handed operation • Secure grip, impact resistant and elastomeric protected
DPI 740 Portable Precision Barometer • Accuracy : ± 0.004 inHg (± 0.15 mbar) absolute • Ranges to 103 inHg (3.5 bar) absolute • Six digit resolution LCD display • Multiple pressure scales and aeronautical units • Alkaline or rechargeable batteries • Lightweight hand-held rugged design • RS232 output
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
DPI 811/812 RTD Calibrator/Loop Calibrator • Measure and simulate RTDs • Automatic detection of two-, three- and four-wire RTDs highlights faulty probe • mA measure, switch test and 24 V loop power • Large backlit display, menu driven interface • HART loop resistor • Secure grip, impact resistant, elastomer protected • Plug and play connector for intelligent Digital Output Sensor (IDOS) Universal Measurement Modules
DPI 821/822 Thermocouple Loop Calibrator • Measure and source thermocouples • Advance Cold Junction compensation virtually eliminates errors due to ambient temperature changes • mA measure, switch test and 24 V loop power • HART loop resistor • Secure grip, impact resistant, elastomer protected • Plug and play connector for intelligent Digital Output Sensor (IDOS) Universal Measurement Modules
DPI 832 Electrical Loop Calibrator • Dual reading capability : source mA, mV or V and simultaneously measure mA or capture switch trip values • Measure or source mA, mV and V • 24 V loop supply to power transmitters and loops • HART loop resistor • Convenient, one-handed operation • Secure grip, impact resistant, elastomer protected • Plug and play connector for intelligent Digital Output Sensor (IDOS) Universal Measurement Modules
DPI 880 Multi-Function Calibrator • Source and reads mA, mV, V, ohms, Frequency and pulses • Simulates and reads 8 RTDs and 12 thermocouples • 32 pressure modules from 10 inH2O to 10,000 psi (25 mbar to 700 bar) • Simultaneous dual reading capability • Automatic switch test and pressure leak test • 1,000 point data storage with real time clock • 24 V loop supply • HART loop resistor • Secure grip, impact resistant, elastomer protected • Plug and play connector for intelligent Digital Output Sensor (IDOS) Universal Measurement Modules
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
DPI 620 CE Advanced Modular Calibration • Multi-function capabilities : electrical, frequency, temperature and pressure • ATEX/IEC approved • Complete HART communicator included • Modular re-rangeable and expandable concept • Individual components can be used as stand-alone instruments • Allows significant inventory reductions • Simplifies training and improves operator safety • Reduces cost of ownership
DPI 620 CE IS AMC Advance Modular Calibrator IS Version The Druck DPI620 CE IS with PV 620 IS Pressure Stations are ATEX approved for stand-alone use in hazardous areas. These high performance pressuregenerating stations can replace conventional hand pumps and gas bottles to provide greater efficiency, ease of use and improve safety. When combined with a reference instrument, such as the DPI 104, they can be used as gauge comparators and pressure calibrators.
DPI 610/ 615 Portable Pressure Calibrator • Ranges 2.5 mbar to 700 bar • Accuracy ±0.025% full scale (FS) all ranges • Integral combined pressure/vacuum pump • Dual readout : input and output • 4 to 20 mA loop test : auto step and ramp • Intrinsically safe (IS) version • RS232 interface and fully documenting version • Remote pressure sensors
PC6 - IDOS Pressure Calibrator • Pressure measurement range to 10,000 psi (700 bar) • ±0.025% full scale (FS) accuracy • Voltage and current measurement with sourcing • Pressure to current or voltage conversion • Current or voltage to pressure conversion • Two-wire transmitter simulation • Simultaneous display of pressure and selected function • Timed/Event data storage with date & time stamping • Upload/download Calibration procedures via RS232 interface • Alternative languages available : French, German, Italian and Spanish
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
PACE Series Modular Pressure Controller PACE 6000 Dual Channel Pressure Controller PACE 5000 Dual Channel Pressure Controller PACE 1000 Precision Pressure Indicator • Selection of Chassis and interchangeable control modules • Single, dual or auto range control module configurations • Up to 210 bar (3,000 psi/21 MPa) gauge & absolute • Choice of precision up to ±0.005% Rdg +0.005% FS • Long-term stability up to ±0.01% rdg per annum • Barometric reference option • Switch Test, Leak Test, Test Program, Burst Test, Analogue output and Volt Free Contact options • Negative gauge calibration included as standard • Intuitive icon task driven menu structure
DPI 142 Precision Barometric Indicator • 24 pressure units • Ranges up to 50 psi a • Precision ±0.01% full scale (FS) • Altitude display in feet and meters • Programmable analogue output (optional) • User handbook, calibration certificate and ac/dc • Power adaptor-SUPPLIED AS STANDARD
DPI 150 Precision Pressure Indicator • Ranges up to 3,000 psi (200 bar) • Precision ±0.01% full scale (FS) • Internal or external Intelligent Digital Output • Sensors TM (IDOSTM) • Programmable analog output • RS232 and IEEE-488 communications • Hold, Maximum/minimum value, tare and programmable filter • Barometric Reference (Optional)
DBC 150/650 Dry Block Temperature Calibrators • Ranges from -45º to 650ºC • Rapid heating, cooling and settling • Switch test, ramp, step and preset functions • Reads set temperature and device output simultaneously • Measures reference probe, RTD's, T/C's mA, mV and ohms • Automated calibration via RS 232
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
InteCal Calibration Management Software • Windows®-based software • Compatible with digital pressure controllers and portable field calibrators • Maintenance scheduling utility • Calibration certificates including customization • Compatible with third party calibrators via FCINTF drivers • Stores instrument details, procedures and results Intecal main screen
Calibration Test Benches Our modular concept is designed with flexibility and expansion in mind. We offer complete systems from simple workbenches to complex applications featuring automatic calibrations using AutoCal calibration management software (ISO 9000 compliant). The calibration modules are comprehensive and are suitable for applications with conventional and state-of-the-art instrumentation. Furthermore, most instruments can be supplied with calibration certificates traceable to international standards. Our systems are typically used for the testing and calibration of pressure, temperature and electrical process instruments such as transmitters, switches, gauges, signal converters and temperature sensors.
Sensepoint XCD RTD (Remote Toxic Detector) Sensepoint XCD RTD (Remote Toxic Detector) has been specifically designed for use with the Honeywell Analytics' range of Sensepoint toxic and Oxygen sensors. This configuration is ideal for a wide range of toxic and Oxygen gas detection applications. The sensor can be mounted up to 30 metres (100 feet) away from the transmitter in areas that are difficult to access. The transmitter can be mounted at a suitable location away from this area where it is easy to access, view its display and interact with via the user interface. where it is easy to access, view its display and interact with via the user interface. Sensepoint toxic and Oxygen sensors offer a wide variety of gases and measuring ranges. The sensor can be mounted directly to the transmitter as well as remotely. Sensepoint XCD RTD can be used as a common platform for all toxic and Oxygen gas detection, reducing spares requirements. The Sensepoint sensor design includes an IS portion with a removable sensor cartridge, eliminating the need for a hot work permit when changing the sensor cartridge. The sensor has an IP67 rating for use in the harshest conditions.
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
UNIK 5000 Pressure Sensing Platform • • • • • • • • • •
Ranges from 70 mbar (1 psi) to 700 bar (10,000 psi) Accuracy to ±0.04% Full Scale (FS) Best Straight Line (BSL) Stainless Steel construction Frequency response to 5 kHz High over pressure capability Hazardous Area certifications mV, mA, voltage and configurable voltage outputs Multiple electrical & pressure connector options Operating temperature ranges from -55 to 125°C (-67 to 257°F)
PTX/ PDCR 1730 Depth and Level Pressure Sensors • • • • • •
Ranges from 3.5 mH2O to 600 mH 2O Accuracy ±0.25% Fully welded 17.5 mm 316 stainless construction Pulse power operation Polyurethane and hydrocarbon resistant cables Full range of installation accessories
PTX/ PDCR 1830 Depth and Level Pressure Sensors • • • • • •
Ranges from 0.75 mH 2O to 600 mH 2O Accuracy ±0.06% Fully welded 17.5 mm titanium construction Integral lightning surge arrestor Polyurethane and hydrocarbon resistant cables Full range of installation accessories
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
UNIK 5000 Pressure Sensing Platform • High Speed control -50 ms Input sampling • Motorized Valve control (Position feed back/Servo control) • Dual PID Controller (Heat/Cool controller) • High Accurcy -0.1% • Extensive number of I/O points • (AI : 3 points, DI : 9 points, DO : 9 points and AO : 2 points) • Enhanced Math Functions • Totalize Function • RS-485 Modbus Communications and Transmitter • Power Supply options available
PXG Series Micro Controller • Auto manual operation with A/M key • Universal process value input • Motorized valve control • Position feed back • Servo control • Smart ramp-soak • Profile recovery • Profile cycling • Delayed start • PV start • 4 patterns, max 32 segments/program • Guaranteed soak • Password function • Alarm Flicker function
PXR Series Micro Controller
96x96 mm 79.5 mm
48x96 mm 78 mm
72x72 mm 79.7 mm
48x48 mm 78.8 mm
24x48 mm 97 mm
• Re-transmission output in 4-20 mA DC... PV (process value), SV (set value) and MV (manipulated output value) can be transferred to other measuring instrument • 8-step ramp/soak function... Allows use as a simple programmable controller with a set value program • RS-485 communication... Selectable between MODBUS protocol and Z-ASCII (Fuji's original) • Digital input... SV (set value) is selectable and various events are executable by external switches, etc. • Heating and cooling control... Applicable to even a self-heating process • Heater burnout alarm... Equipment damage can be prevented • Various alarm function... Delay action, excitation/non-excitation selection or latch function can be combined with alarm • Remote SV input... SV (set value) can be selected with 1 to 5 VDC signals from outside
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
PHC/PHA Microjet Recorder Series
• Continuous recording • 6 colors • 180 mm width, 12 channels • 100 mm width, 6 channels • Digital data printing in channel color • Self-printing scale in channel color • Tag No./Name printing in channel color, 8 digits (Max) • Message printing in 6 color • Long life recording 6 months continuous operation with one cartridge
• Color on each channel is selectable The following status printing is available for analyzing recording results. • Alarm Red at alarm ON, black at alarm OFF, Channel No. and time are printed • Burnout • Ink shortage • Recording start mark • Chart speed change mark • High reliability recording • 6 colors continuous trace • Ink is not soluble in water, excellent water/sunlight resisting characteristics. • Compact and light-weight design • Mass (weight) : 2.1 kg/100 mm width 6.0 kg/180 mm width • Depth : 199 mm • Simple choice • The 100 and 180 mm width recorders are configurable on each channel and accept most industrial inputs • The recorder operates on AC power 100 to 240 V
PHE Microjet Recorder Series-E • This recorder has basically 2 models, user programmable model and factory configuration model • Factory can pre-configure recorder parameters with customer supplied information prior to shipment, reducing the users' total installation cost and time • In case of 1 or 2 continuous recording, 2-color type Ink cartridge (PHZH2002) is also available • Since its life-span became longer than before, you can cut the running-cost in 1/4-1/2 • Real time clock (calendar) function is available with standard specification
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
PHF • Long Term Record Data Saving 4 years in Compact Flash (In case of using 512 MB Compact Flash) • Saved Data playback Saved data in Memory card can be easily called out and played back on display • Communication Ethernet (10Base-T) is available. (option) • Screen saver Period of non-operation exceeds the setting value of parameter, recorder turns off the backlight of LCD. • PC support softwares (Data Viewer/Parameter Loader) Supplied in a CD-ROM as a part of standard accessory • Compact size 160 (W) x 144 (H) x 185 (D) mm (Panel mount)1.5 kg compact size • 3-point recording and 6-point max. recording 12 types of thermocouples, 5 types of resistance bulbs and voltage/current input are available
PHL • Long Term Record Data Saving 3 years in Compact Flash (In case of using 512 MB Compact Flash) • Saved Data playback Saved data in Memory card can be easily called out and played back on display • Math and totalization These functions are available as standard. • Communication RS485, MODBUS RTU protocol is available. (option) Ethernet (10Base-T) is available. (option) • Screen saver Period of non-operation exceeds the setting value of parameter, recorder turns off the backlight of LCD. • PC support softwares (Data Viewer/Parameter Loader) Supplied in a CD-ROM as a part of standard accessory • Compact size 160 (W) x 144 (H) x 185 (D) mm (Panel mount)1.5 kg compact size • 9-point recording and 18-point max. recording 12 types of thermocouples, 5 types of resistance bulbs and voltage/current input are available
PHU • Long Term Record Data Saving 3years in Compact Flash (In case of using 512 MB Compact Flash) • Saved Data playback Saved data in Memory card can be easily called out and played back on display • Math and totalization These functions are available as standard • Communication Ethernet (10Base-T) is available (option) • Screen saver Period of non-operation exceeds the setting value of parameter, recorder turns off the backlight of LCD • PC support softwares (Data Viewer/Parameter Loader) Supplied in a CD-ROM as a part of standard accessory • 36-point max. recording 12 types of thermocouples, 5 types of resistance bulbs and voltage/current input are available
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Hybrid Type Duosonics
Flow transmitter (FSH)
Detector (FSW)
• Expansion of applicable fluid domain enabled by automatic switching • High accuracy of ±0.5 to 1% • Flow velocity distribution within the piping is visible • Quick response (0.2 sec) Specifications : Sensor type : FSWS12 : for Ø40 to Ø200 mm/-40 to 100˚C FSWS21 : for Ø100 to Ø400 mm/-40 to 80˚C FSWS40 : for Ø200 to Ø500 mm/-40 to 80˚C FSWS50 : for Ø500 to Ø1,000 mm/-40 to 80˚C Measurement range : -4 to 0 to +32 m/s (min. 0.3 m/s) Response Time : 0.2 sec or less Output signal : 4 to 20 mA DC, pulse output, alarm output Communication function : RS485 or RS232C Accuracy : ± 0.5 to 1.0% of rate Structure : IP67 Watertight for both flow transmitter and detector Power-supply voltage : 100 to 240 VAC or 20 to 30 VDC Cable length between detector and flow transmitter : 150 m max
Compact Type TIME DELTA-C
Flow transmitter (FSV)
Detector (FSG, FSD, FLS)
• Small, lightweight flow transmitter having a high tolerance for air bubbles in liquid • High accuracy measurement (± 1.0% of rate) • Setting operation can be performed from the front side of theflow transmitter. • With RS232C/RS485 communication function provided (optional) Specifications : Sensor type : FLSE1 : for Ø25 to Ø100 mm/-20 to 100˚C FLSE2 : for Ø50 to Ø225 mm/-20 to 100˚C FSGS3 : for Ø50 to Ø300 mm/-40 to 80˚C FSGS4,5 : for Ø200 to Ø6,000 mm/-40 to 80˚C FSD22 : for Ø13 to Ø100 mm/-40 to 100˚C FSD32 : for Ø50 to Ø400 mm/-40 to 200˚C Measurement range : -32 to 0 to +32 m/s (min. 0.3 m/s) Response Time : 0.2 sec. or less Output signal : 4 to 20 mADC, pulse output, alarm output Communication function : RS485 or RS232C Accuracy : ± 1.0% of rate Power-supply voltage : 100 to 240 VAC or 20 to 30 VDC
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Compact M-Flow PW
Detector (FLS)
Flow transmitter (FLR)
• Converter as compact as140x130 mm in size (front face) • High-speed response of 0.2 seconds • Accuracy : ±1.5 to 2% of rating • Low-cost flowmeter ideal for measurement of clean fluid Specifications : Sensor type : FLSE12 : for Ø25 to Ø100 mm/-20 to 100˚C or 120˚C FLSE22 : for Ø50 to Ø225 mm/-20 to 100˚C or 120˚C FLSE31 : for Ø50 to Ø300 mm/-20 to 80˚C FLSE41 : for Ø300 to Ø600 mm/-20 to 80˚C Measurement range : -10 to 0 to 10 m/s (min 0.3 m/s) Response Time : 0.2 seconds Output signal : 4 to 20 mADC, Pulse output and Alarm output Communication function : RS485 or RS232C Accuracy : ± 1.5 to 2% of rate Structure : Waterproof detector and converter structure conforming to IP65 Power-supply voltage : 100 V to 120 VAC, 200 to 240 VAC or 20 to 30 VDC Cable length between detector and converter : 30 m max
2 Lines Type
Detector (FSG, FSD)
Flow transmitter (FSH)
• High resistance to air bubbles in liquid • Simultaneous 2-line • High-accuracy measurement of 1.0% of rating • Rarely affected by temperature and pressure fluctuation of fluid Specifications : Sensor type : FSGS3 : for Ø50 to Ø400 mm/-40 to 80˚C FSGS5 : for Ø200 to Ø6,000 mm/-40 to 80˚C FSD32 : for Ø50 to Ø400 mm/-40 to 200˚C Measurement range : -32 to 0 to 32 m/s (min 0.3 m/s) Response Time : within 0.5 seconds Output signal : 4 to 20 mADC, Pulse output and Alarm output Communication function : RS485 or RS232C Accuracy : ± 1.0% of rate Power-supply voltage : 100 V to 240 VAC or 20 to 30 VDC Cable length between detector and converter : 150 m max
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Portable Portaflow-C
Flow transmitter (FSC)
Specifications : Sensor type : FSD22 : for Ø13 to Ø100 mm/-40 to 100˚C FSD12 : for Ø50 to Ø300 mm/-40 to 100˚C FSD32 : for Ø50 to Ø400 mm/-40 to 200˚C FSD41 : for Ø200 to Ø1,200 mm/-40 to 80˚C FSD51 : for Ø200 to Ø6,000 mm/-40 to 80˚C Measurement range : -32 to 0 to 32 m/s (min 0.3 m/s) Response Time : within 1 second Analog output signsal : 4 to 20 mADC Analog intput signsal : 4 to 20 mADC / 1 to 5 VDC Accuracy : ±1.0% of rate Power-supply voltage : 100 to 240 VAC, Built-in battery SD memory card : Saves instantaneous value, total value, etc Options : With printer, Flow velocity profile • The measurement data can be stored in a SD Large memory card for a long time • Consumed heat quantity can be measured • Designed for 12 hours of continuors operation with its own builtin battery • Provided with a printer (option) • A useful USB port given for connecting with a PC
Detector (FSD)
Computation function of consumed heat quantity :
This function calculated the heat quantity received and sent with liquid (water) in cooling and heating
Temperature sensor
Consumed heat quantity q = K . Q . (T1-T2) K : heat quantity conversion factor (For heating K = 4.123)
Converter
T1 : Temperature of the heating medium on the emitting side
Heat source
Converter
Load
Temperature sensor
Detector (type : FSD)
T2 : Temperature of the heating medium of the receiving side
Q : Flow rate of the heating medium
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
D5000 Series Universal Type Digital Panel Meter • No adjustment after unit replacement is required • Free power supply voltage (90 to 264 VAC, 9 to 60 VDC) • Enabling short delivery and quick response to any applications even in small stock • The communication function (RS-232C/RS-485) enables personal computers to easily process and control various data • CE/UL/CSA (To be acquired soon)
Main Unit
Main Board Two type of main board 1. 90 to 264 VAC power supply 2. 9 to 60 VDC power supply
Output Unit
Output Board Seven type of output board 0. None 1. HI & LO setpoint 2. Analog output 3. RS-232C 4. RS-485 5. HI & LO setpoint+analog output 6. HI & LO setpoint+analog output+RS-232C 7. HI & LO setpoint+analog output+RS-485
Display Unit
Input Unit
Input Board Eighteen type of input board 01. DC voltage (±99.99 mV) 02. DC voltage (±999.9 mV to ±600 V) 03. DC current (±9.999 mA to ±999.9 mA) 04. AC voltage AVG (99.99 mV to 9.999 V) 05. AC voltage AVG (99.99 V to 600 V) 06. AC voltage RMS (99.99 mV to 9.999 V) 07. AC voltage RMS (99.99 V to 600 V) 08. AC current AVG (9.999 mA to 999.9 mA) 09. AC current AVG (5 A) 10. AC current RMS (9.999 mA to 999.9 mA) 11. AC current RMS (5 A) 12. Resistance (99.99 Ω to 99.99 kΩ) 13. Temperature (Thermocouple) 14. Temperature (RTD) 15. Frequency (Open collector, Logic, Magnet) 16. Frequency (50 to 500 Vrms) 17. Strain gauge 18. 1 to 5 V, 4 to 20 mA
Display Board Two type of display board 1. Single display 2. Multiple (monitor HI and LO set point) display
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
FKH/FKP/FKA PRESSURE AND ABSOLUTE TRANSMITTER
(L-Type)
(T-Type)
• High accuracy ±0.065-0.2% accuracy for all calibrated spans is the standard feature for all AP models covering 8.125 to 3,000 kPa {0.13 to 30 bar} high pressure range. Fuji's micro-capacitance silicon sensor assures this feature for all suppressed calibration ranges without additional adjustment • Minimum inventory Electronics unit, communication module, local indicators and electronics housing are interchangeable among all FCX–AIII models • Fuji/HART bilingual communication module The communication module is "bilingual" to speak both Fuji proprietary protocol and HART. Any HART compatible devices can communicate with FCX-AIII series transmitters. • Application flexibility Example features that render the FCX-AIII suitable for almost any process applications includes : • Full range of hazardous location approvals • Built-in RFI filter and lightning arrester • 5-digits LCD meter • The maximum span of each sensor can be converted to in different units using below factors • Burnout current flexibility (Under Scale : 3.2 to 4.0 mA, Over Scale : 20.0 to 22.5 mA) Burnout signal level is adjustable using Model FXW Hand Held Communicator (HHC) to comply with NAMUR NE43
Hydroseal® Diaphragm Version
• High accuracy ±0.15% accuracy for all calibrated spans is the standard • Feature for pressure transmitter covering 50 to 10,000 kPa (or 0.5 to 100 kgf/cm2). Fuji’s Micro-capacitance silicon sensor assures this feature
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
FKB Remote Seal Type Pressure Transmitter The FCX -AIII pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20mA signal The transmitter utilizes a unique micro machined capacitance silicon sensor with state-of-the-art microprocessor Technology to provide exceptional performance and functionality Totally welded construction of the seals assures excellent reliability in high temperature and highly corrosive process Conditions
FKX Small Flange Remote Seal Type Differential Pressure Transmitter • Directly connectable to 1-1/2 in and 2 in flanges The transmitter is connectable to 1-1/2 in and 2in pipes without a reducer. • Flow measurement without impulse piping 1/2 in and 3/4 in flange size is also available. This differential pressure transmitter allows connection to 1/2 in and 3/4 in flanges of a general size for the orifice tap, which eliminates the need of using a impulse piping. Problems with the impulse piping, such as clogging , leaks or corrosion can be solved. In addition, the following process connection is also available. Screw connection 1/2-14NPT, 3/4-14NPT, Rc 1/2, Rc 3/4 • Minimum environmental influence The “Advanced Floating Cell” design which protects the pressure sensor against changes in temperature, static pressure and overpressure substantially reduces total measurement error in actual field applications • Fuji/HART ® bilingual communications protocol FCX -AIII series transmitter offers bilingual communications to speak both Fuji proprietary protocol and HART ®. Any HART compatible devices can communicate with FCX-AIII.
FKC DIFFERENTIAL PRESSURE (FLOW) TRANSMITTER The FKC–AIII differential pressure (flow) transmitter accurately measures differential pressure, liquid level, gauge pressure or flow rate and transmits a proportional 4 to 20 mA signal. The transmitter utilizes a unique micro machined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality (L-Type)
(L-Type)
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Temperature Sensors Main Applications • Temperature Measurement & Control for industrial applications Key Features and Advantages Resistance Temperature Detector (RTD) • Type of Sensor : PT-50, PT-100, PT-500, PT-1000, NI-1000, NI-100, NI-120 & etc • Standard : IEC 751 & BS EN 60751 Thermocouple Sensor • Type of Sensor : K, J, T, E, R, S, B & etc • Standard : IEC 584 & BS EN 60584 • Design : According to customer’s specification & customisation to customer’s requirement
Thermowells Main Applications • Protect temperature sensors and bi-metallic thermometers by insulating them from their environment. Key Features and Advantages • Type of thermowells : Thread Thermowell, Welded Thermowell, Sanitary Flange Thermowell & etc • Construction : Drilled Bar Stock Thermowell, Fabricated • Thermowell, Jacket Type Thermowell & etc • Flange Standard : ASME B16.5, JIS, DIN, API • Thermowell Design : Shell Design, Vanstone Design, API Design & Others • Welding Standard : ASME IX Qualified Welder, WPS & PQR • Dye Penetration Check, Hydrostatic Test, Radiographic Check, Ultrasonic Check, Positive Material Identification, Ferrite Count & Other Mechanical Tests are available upon request
www.stcontrol.com
S.T. Control Co., Ltd.
Your Partner in Factory Solutions
Levels Control Instruments • Level control for a wide range of applications : Key Features and Advantages • Level Magnetic Float Level Switches • Cable Float Level Switches • Side Mounted Level Switches • Tuning Fork Level Switches • Capacitance Level Switches • Rotary Paddle Level Switches • Magnetic Level Gauges • Magnetic Level Gauges • Ultrasonic Level Transmitters • Radar Level Transmitters
Engineering Assembly Work To withdraw samples from process pipe lines for periodic quality check and to Protect Level Sensor Probes which measures process level. Key Features and Advantages : • Sampling Probe according to ASME Standard • Level Chamber according to piping specification B31.3 • Skid Assembly as per Pharmaceutical Standard • Other products : Vent Header, Condensation Port, Catalyst Probe Assembly, Recovery Tank, Cooling Tower & Others • Dye Penetration Check, Hydrostatic Test, Radiographic Check, Ultrasonic Check, Positive Material Identification Tests are available for request
Wires & Accessories Wires and wiring insulation solutions for temperature measurement and control, especially for long distance temperature measurements • Explosion Prood Head (ATEX, FM/CSA) • Weather Prood Head (IP 65 to IP 67) • Thermocouple Wire Conform to ANSI, IEC & JIS • RTD Extension Cable & Thermocouple Extension Cable • High-Temp Connector, Standard Connector, Miniature Connector
www.stcontrol.com